summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/misc/Kconfig30
-rw-r--r--drivers/misc/Makefile2
-rw-r--r--drivers/misc/ad525x_dpot-i2c.c119
-rw-r--r--drivers/misc/ad525x_dpot-spi.c172
-rw-r--r--drivers/misc/ad525x_dpot.c629
-rw-r--r--drivers/misc/ad525x_dpot.h173
6 files changed, 806 insertions, 319 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0d0d625fece2..69e019e7d69c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -14,11 +14,15 @@ menuconfig MISC_DEVICES
if MISC_DEVICES
config AD525X_DPOT
- tristate "Analog Devices AD525x Digital Potentiometers"
- depends on I2C && SYSFS
+ tristate "Analog Devices Digital Potentiometers"
+ depends on (I2C || SPI) && SYSFS
help
If you say yes here, you get support for the Analog Devices
- AD5258, AD5259, AD5251, AD5252, AD5253, AD5254 and AD5255
+ AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
+ AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
+ AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
+ AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
+ AD7376, AD8400, AD8402, AD8403, ADN2850
digital potentiometer chips.
See Documentation/misc-devices/ad525x_dpot.txt for the
@@ -27,6 +31,26 @@ config AD525X_DPOT
This driver can also be built as a module. If so, the module
will be called ad525x_dpot.
+config AD525X_DPOT_I2C
+ tristate "support I2C bus connection"
+ depends on AD525X_DPOT && I2C
+ help
+ Say Y here if you have a digital potentiometers hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-i2c.
+
+config AD525X_DPOT_SPI
+ tristate "support SPI bus connection"
+ depends on AD525X_DPOT && SPI_MASTER
+ help
+ Say Y here if you have a digital potentiometers hooked to an SPI bus.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-spi.
+
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f12dc3e54402..6ed06a19474a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -4,6 +4,8 @@
obj-$(CONFIG_IBM_ASM) += ibmasm/
obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o
+obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o
+obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
diff --git a/drivers/misc/ad525x_dpot-i2c.c b/drivers/misc/ad525x_dpot-i2c.c
new file mode 100644
index 000000000000..971e61d7f881
--- /dev/null
+++ b/drivers/misc/ad525x_dpot-i2c.c
@@ -0,0 +1,119 @@
+/*
+ * Driver for the Analog Devices digital potentiometers (I2C bus)
+ *
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include "ad525x_dpot.h"
+
+/* ------------------------------------------------------------------------- */
+/* I2C bus functions */
+static int write_d8(void *client, u8 val)
+{
+ return i2c_smbus_write_byte(client, val);
+}
+
+static int write_r8d8(void *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int write_r8d16(void *client, u8 reg, u16 val)
+{
+ return i2c_smbus_write_word_data(client, reg, val);
+}
+
+static int read_d8(void *client)
+{
+ return i2c_smbus_read_byte(client);
+}
+
+static int read_r8d8(void *client, u8 reg)
+{
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int read_r8d16(void *client, u8 reg)
+{
+ return i2c_smbus_read_word_data(client, reg);
+}
+
+static const struct ad_dpot_bus_ops bops = {
+ .read_d8 = read_d8,
+ .read_r8d8 = read_r8d8,
+ .read_r8d16 = read_r8d16,
+ .write_d8 = write_d8,
+ .write_r8d8 = write_r8d8,
+ .write_r8d16 = write_r8d16,
+};
+
+static int __devinit ad_dpot_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ad_dpot_bus_data bdata = {
+ .client = client,
+ .bops = &bops,
+ };
+
+ struct ad_dpot_id dpot_id = {
+ .name = (char *) &id->name,
+ .devid = id->driver_data,
+ };
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+ return -EIO;
+ }
+
+ return ad_dpot_probe(&client->dev, &bdata, &dpot_id);
+}
+
+static int __devexit ad_dpot_i2c_remove(struct i2c_client *client)
+{
+ return ad_dpot_remove(&client->dev);
+}
+
+static const struct i2c_device_id ad_dpot_id[] = {
+ {"ad5258", AD5258_ID},
+ {"ad5259", AD5259_ID},
+ {"ad5251", AD5251_ID},
+ {"ad5252", AD5252_ID},
+ {"ad5253", AD5253_ID},
+ {"ad5254", AD5254_ID},
+ {"ad5255", AD5255_ID},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ad_dpot_id);
+
+static struct i2c_driver ad_dpot_i2c_driver = {
+ .driver = {
+ .name = "ad_dpot",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad_dpot_i2c_probe,
+ .remove = __devexit_p(ad_dpot_i2c_remove),
+ .id_table = ad_dpot_id,
+};
+
+static int __init ad_dpot_i2c_init(void)
+{
+ return i2c_add_driver(&ad_dpot_i2c_driver);
+}
+module_init(ad_dpot_i2c_init);
+
+static void __exit ad_dpot_i2c_exit(void)
+{
+ i2c_del_driver(&ad_dpot_i2c_driver);
+}
+module_exit(ad_dpot_i2c_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("digital potentiometer I2C bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:ad_dpot");
diff --git a/drivers/misc/ad525x_dpot-spi.c b/drivers/misc/ad525x_dpot-spi.c
new file mode 100644
index 000000000000..b8c6df9c8437
--- /dev/null
+++ b/drivers/misc/ad525x_dpot-spi.c
@@ -0,0 +1,172 @@
+/*
+ * Driver for the Analog Devices digital potentiometers (SPI bus)
+ *
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include "ad525x_dpot.h"
+
+static const struct ad_dpot_id ad_dpot_spi_devlist[] = {
+ {.name = "ad5160", .devid = AD5160_ID},
+ {.name = "ad5161", .devid = AD5161_ID},
+ {.name = "ad5162", .devid = AD5162_ID},
+ {.name = "ad5165", .devid = AD5165_ID},
+ {.name = "ad5200", .devid = AD5200_ID},
+ {.name = "ad5201", .devid = AD5201_ID},
+ {.name = "ad5203", .devid = AD5203_ID},
+ {.name = "ad5204", .devid = AD5204_ID},
+ {.name = "ad5206", .devid = AD5206_ID},
+ {.name = "ad5207", .devid = AD5207_ID},
+ {.name = "ad5231", .devid = AD5231_ID},
+ {.name = "ad5232", .devid = AD5232_ID},
+ {.name = "ad5233", .devid = AD5233_ID},
+ {.name = "ad5235", .devid = AD5235_ID},
+ {.name = "ad5260", .devid = AD5260_ID},
+ {.name = "ad5262", .devid = AD5262_ID},
+ {.name = "ad5263", .devid = AD5263_ID},
+ {.name = "ad5290", .devid = AD5290_ID},
+ {.name = "ad5291", .devid = AD5291_ID},
+ {.name = "ad5292", .devid = AD5292_ID},
+ {.name = "ad5293", .devid = AD5293_ID},
+ {.name = "ad7376", .devid = AD7376_ID},
+ {.name = "ad8400", .devid = AD8400_ID},
+ {.name = "ad8402", .devid = AD8402_ID},
+ {.name = "ad8403", .devid = AD8403_ID},
+ {.name = "adn2850", .devid = ADN2850_ID},
+ {}
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* SPI bus functions */
+static int write8(void *client, u8 val)
+{
+ u8 data = val;
+ return spi_write(client, &data, 1);
+}
+
+static int write16(void *client, u8 reg, u8 val)
+{
+ u8 data[2] = {reg, val};
+ return spi_write(client, data, 1);
+}
+
+static int write24(void *client, u8 reg, u16 val)
+{
+ u8 data[3] = {reg, val >> 8, val};
+ return spi_write(client, data, 1);
+}
+
+static int read8(void *client)
+{
+ int ret;
+ u8 data;
+ ret = spi_read(client, &data, 1);
+ if (ret < 0)
+ return ret;
+
+ return data;
+}
+
+static int read16(void *client, u8 reg)
+{
+ int ret;
+ u8 buf_rx[2];
+
+ write16(client, reg, 0);
+ ret = spi_read(client, buf_rx, 2);
+ if (ret < 0)
+ return ret;
+
+ return (buf_rx[0] << 8) | buf_rx[1];
+}
+
+static int read24(void *client, u8 reg)
+{
+ int ret;
+ u8 buf_rx[3];
+
+ write24(client, reg, 0);
+ ret = spi_read(client, buf_rx, 3);
+ if (ret < 0)
+ return ret;
+
+ return (buf_rx[1] << 8) | buf_rx[2];
+}
+
+static const struct ad_dpot_bus_ops bops = {
+ .read_d8 = read8,
+ .read_r8d8 = read16,
+ .read_r8d16 = read24,
+ .write_d8 = write8,
+ .write_r8d8 = write16,
+ .write_r8d16 = write24,
+};
+
+static const struct ad_dpot_id *dpot_match_id(const struct ad_dpot_id *id,
+ char *name)
+{
+ while (id->name && id->name[0]) {
+ if (strcmp(name, id->name) == 0)
+ return id;
+ id++;
+ }
+ return NULL;
+}
+
+static int __devinit ad_dpot_spi_probe(struct spi_device *spi)
+{
+ char *name = spi->dev.platform_data;
+ const struct ad_dpot_id *dpot_id;
+
+ struct ad_dpot_bus_data bdata = {
+ .client = spi,
+ .bops = &bops,
+ };
+
+ dpot_id = dpot_match_id(ad_dpot_spi_devlist, name);
+
+ if (dpot_id == NULL) {
+ dev_err(&spi->dev, "%s not in supported device list", name);
+ return -ENODEV;
+ }
+
+ return ad_dpot_probe(&spi->dev, &bdata, dpot_id);
+}
+
+static int __devexit ad_dpot_spi_remove(struct spi_device *spi)
+{
+ return ad_dpot_remove(&spi->dev);
+}
+
+static struct spi_driver ad_dpot_spi_driver = {
+ .driver = {
+ .name = "ad_dpot",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad_dpot_spi_probe,
+ .remove = __devexit_p(ad_dpot_spi_remove),
+};
+
+static int __init ad_dpot_spi_init(void)
+{
+ return spi_register_driver(&ad_dpot_spi_driver);
+}
+module_init(ad_dpot_spi_init);
+
+static void __exit ad_dpot_spi_exit(void)
+{
+ spi_unregister_driver(&ad_dpot_spi_driver);
+}
+module_exit(ad_dpot_spi_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("digital potentiometer SPI bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ad_dpot");
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index ce92088bf0b8..a41c2de0eae8 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -1,6 +1,6 @@
/*
- * ad525x_dpot: Driver for the Analog Devices AD525x digital potentiometers
- * Copyright (c) 2009 Analog Devices, Inc.
+ * ad525x_dpot: Driver for the Analog Devices digital potentiometers
+ * Copyright (c) 2009-2010 Analog Devices, Inc.
* Author: Michael Hennerich <hennerich@blackfin.uclinux.org>
*
* DEVID #Wipers #Positions Resistor Options (kOhm)
@@ -11,6 +11,32 @@
* AD5255 3 512 25, 250
* AD5253 4 64 1, 10, 50, 100
* AD5254 4 256 1, 10, 50, 100
+ * AD5160 1 256 5, 10, 50, 100
+ * AD5161 1 256 5, 10, 50, 100
+ * AD5162 2 256 2.5, 10, 50, 100
+ * AD5165 1 256 100
+ * AD5200 1 256 10, 50
+ * AD5201 1 33 10, 50
+ * AD5203 4 64 10, 100
+ * AD5204 4 256 10, 50, 100
+ * AD5206 6 256 10, 50, 100
+ * AD5207 2 256 10, 50, 100
+ * AD5231 1 1024 10, 50, 100
+ * AD5232 2 256 10, 50, 100
+ * AD5233 4 64 10, 50, 100
+ * AD5235 2 1024 25, 250
+ * AD5260 1 256 20, 50, 200
+ * AD5262 2 256 20, 50, 200
+ * AD5263 4 256 20, 50, 200
+ * AD5290 1 256 10, 50, 100
+ * AD5291 1 256 20
+ * AD5292 1 1024 20
+ * AD5293 1 1024 20
+ * AD7376 1 128 10, 50, 100, 1M
+ * AD8400 1 256 1, 10, 50, 100
+ * AD8402 2 256 1, 10, 50, 100
+ * AD8403 4 256 1, 10, 50, 100
+ * ADN2850 3 512 25, 250
*
* See Documentation/misc-devices/ad525x_dpot.txt for more info.
*
@@ -28,77 +54,182 @@
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/slab.h>
-#define DRIVER_NAME "ad525x_dpot"
-#define DRIVER_VERSION "0.1"
-
-enum dpot_devid {
- AD5258_ID,
- AD5259_ID,
- AD5251_ID,
- AD5252_ID,
- AD5253_ID,
- AD5254_ID,
- AD5255_ID,
-};
+#define DRIVER_VERSION "0.2"
-#define AD5258_MAX_POSITION 64
-#define AD5259_MAX_POSITION 256
-#define AD5251_MAX_POSITION 64
-#define AD5252_MAX_POSITION 256
-#define AD5253_MAX_POSITION 64
-#define AD5254_MAX_POSITION 256
-#define AD5255_MAX_POSITION 512
-
-#define AD525X_RDAC0 0
-#define AD525X_RDAC1 1
-#define AD525X_RDAC2 2
-#define AD525X_RDAC3 3
-
-#define AD525X_REG_TOL 0x18
-#define AD525X_TOL_RDAC0 (AD525X_REG_TOL | AD525X_RDAC0)
-#define AD525X_TOL_RDAC1 (AD525X_REG_TOL | AD525X_RDAC1)
-#define AD525X_TOL_RDAC2 (AD525X_REG_TOL | AD525X_RDAC2)
-#define AD525X_TOL_RDAC3 (AD525X_REG_TOL | AD525X_RDAC3)
-
-/* RDAC-to-EEPROM Interface Commands */
-#define AD525X_I2C_RDAC (0x00 << 5)
-#define AD525X_I2C_EEPROM (0x01 << 5)
-#define AD525X_I2C_CMD (0x80)
-
-#define AD525X_DEC_ALL_6DB (AD525X_I2C_CMD | (0x4 << 3))
-#define AD525X_INC_ALL_6DB (AD525X_I2C_CMD | (0x9 << 3))
-#define AD525X_DEC_ALL (AD525X_I2C_CMD | (0x6 << 3))
-#define AD525X_INC_ALL (AD525X_I2C_CMD | (0xB << 3))
-
-static s32 ad525x_read(struct i2c_client *client, u8 reg);
-static s32 ad525x_write(struct i2c_client *client, u8 reg, u16 value);
+#include "ad525x_dpot.h"
/*
* Client data (each client gets its own)
*/
struct dpot_data {
+ struct ad_dpot_bus_data bdata;
struct mutex update_lock;
unsigned rdac_mask;
unsigned max_pos;
- unsigned devid;
+ unsigned long devid;
+ unsigned uid;
+ unsigned feat;
+ unsigned wipers;
+ u16 rdac_cache[8];
};
+static inline int dpot_read_d8(struct dpot_data *dpot)
+{
+ return dpot->bdata.bops->read_d8(dpot->bdata.client);
+}
+
+static inline int dpot_read_r8d8(struct dpot_data *dpot, u8 reg)
+{
+ return dpot->bdata.bops->read_r8d8(dpot->bdata.client, reg);
+}
+
+static inline int dpot_read_r8d16(struct dpot_data *dpot, u8 reg)
+{
+ return dpot->bdata.bops->read_r8d16(dpot->bdata.client, reg);
+}
+
+static inline int dpot_write_d8(struct dpot_data *dpot, u8 val)
+{
+ return dpot->bdata.bops->write_d8(dpot->bdata.client, val);
+}
+
+static inline int dpot_write_r8d8(struct dpot_data *dpot, u8 reg, u16 val)
+{
+ return dpot->bdata.bops->write_r8d8(dpot->bdata.client, reg, val);
+}
+
+static inline int dpot_write_r8d16(struct dpot_data *dpot, u8 reg, u16 val)
+{
+ return dpot->bdata.bops->write_r8d16(dpot->bdata.client, reg, val);
+}
+
+static s32 dpot_read(struct dpot_data *dpot, u8 reg)
+{
+ unsigned val = 0;
+
+ if (dpot->feat & F_SPI) {
+ if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD))) {
+
+ if (dpot->feat & F_RDACS_WONLY)
+ return dpot->rdac_cache[reg & DPOT_RDAC_MASK];
+
+ if (dpot->uid == DPOT_UID(AD5291_ID) ||
+ dpot->uid == DPOT_UID(AD5292_ID) ||
+ dpot->uid == DPOT_UID(AD5293_ID))
+ return dpot_read_r8d8(dpot,
+ DPOT_AD5291_READ_RDAC << 2);
+
+ val = DPOT_SPI_READ_RDAC;
+ } else if (reg & DPOT_ADDR_EEPROM) {
+ val = DPOT_SPI_READ_EEPROM;
+ }
+
+ if (dpot->feat & F_SPI_16BIT)
+ return dpot_read_r8d8(dpot, val);
+ else if (dpot->feat & F_SPI_24BIT)
+ return dpot_read_r8d16(dpot, val);
+
+ } else { /* I2C */
+
+ if ((reg & DPOT_REG_TOL) || (dpot->max_pos > 256))
+ return dpot_read_r8d16(dpot, (reg & 0xF8) |
+ ((reg & 0x7) << 1));
+ else
+ return dpot_read_r8d8(dpot, reg);
+
+ }
+ return -EFAULT;
+}
+
+static s32 dpot_write(struct dpot_data *dpot, u8 reg, u16 value)
+{
+ unsigned val = 0;
+
+ if (dpot->feat & F_SPI) {
+ if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD))) {
+ if (dpot->feat & F_RDACS_WONLY)
+ dpot->rdac_cache[reg & DPOT_RDAC_MASK] = value;
+
+ if (dpot->feat & F_AD_APPDATA) {
+ if (dpot->feat & F_SPI_8BIT) {
+ val = ((reg & DPOT_RDAC_MASK) <<
+ DPOT_MAX_POS(dpot->devid)) |
+ value;
+ return dpot_write_d8(dpot, val);
+ } else if (dpot->feat & F_SPI_16BIT) {
+ val = ((reg & DPOT_RDAC_MASK) <<
+ DPOT_MAX_POS(dpot->devid)) |
+ value;
+ return dpot_write_r8d8(dpot, val >> 8,
+ val & 0xFF);
+ } else
+ BUG();
+ } else {
+ if (dpot->uid == DPOT_UID(AD5291_ID) ||
+ dpot->uid == DPOT_UID(AD5292_ID) ||
+ dpot->uid == DPOT_UID(AD5293_ID))
+ return dpot_write_r8d8(dpot,
+ (DPOT_AD5291_RDAC << 2) |
+ (value >> 8), value & 0xFF);
+
+ val = DPOT_SPI_RDAC | (reg & DPOT_RDAC_MASK);
+ }
+ } else if (reg & DPOT_ADDR_EEPROM) {
+ val = DPOT_SPI_EEPROM | (reg & DPOT_RDAC_MASK);
+ } else if (reg & DPOT_ADDR_CMD) {
+ switch (reg) {
+ case DPOT_DEC_ALL_6DB:
+ val = DPOT_SPI_DEC_ALL_6DB;
+ break;
+ case DPOT_INC_ALL_6DB:
+ val = DPOT_SPI_INC_ALL_6DB;
+ break;
+ case DPOT_DEC_ALL:
+ val = DPOT_SPI_DEC_ALL;
+ break;
+ case DPOT_INC_ALL:
+ val = DPOT_SPI_INC_ALL;
+ break;
+ }
+ } else
+ BUG();
+
+ if (dpot->feat & F_SPI_16BIT)
+ return dpot_write_r8d8(dpot, val, value);
+ else if (dpot->feat & F_SPI_24BIT)
+ return dpot_write_r8d16(dpot, val, value);
+ } else {
+ /* Only write the instruction byte for certain commands */
+ if (reg & DPOT_ADDR_CMD)
+ return dpot_write_d8(dpot, reg);
+
+ if (dpot->max_pos > 256)
+ return dpot_write_r8d16(dpot, (reg & 0xF8) |
+ ((reg & 0x7) << 1), value);
+ else
+ /* All other registers require instruction + data bytes */
+ return dpot_write_r8d8(dpot, reg, value);
+
+ }
+
+ return -EFAULT;
+}
+
/* sysfs functions */
static ssize_t sysfs_show_reg(struct device *dev,
- struct device_attribute *attr, char *buf, u32 reg)
+ struct device_attribute *attr,
+ char *buf, u32 reg)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dpot_data *data = i2c_get_clientdata(client);
+ struct dpot_data *data = dev_get_drvdata(dev);
s32 value;
mutex_lock(&data->update_lock);
- value = ad525x_read(client, reg);
+ value = dpot_read(data, reg);
mutex_unlock(&data->update_lock);
if (value < 0)
@@ -111,7 +242,7 @@ static ssize_t sysfs_show_reg(struct device *dev,
* datasheet (Rev. A) for more details.
*/
- if (reg & AD525X_REG_TOL)
+ if (reg & DPOT_REG_TOL)
return sprintf(buf, "0x%04x\n", value & 0xFFFF);
else
return sprintf(buf, "%u\n", value & data->rdac_mask);
@@ -121,8 +252,7 @@ static ssize_t sysfs_set_reg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count, u32 reg)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dpot_data *data = i2c_get_clientdata(client);
+ struct dpot_data *data = dev_get_drvdata(dev);
unsigned long value;
int err;
@@ -134,8 +264,8 @@ static ssize_t sysfs_set_reg(struct device *dev,
value = data->rdac_mask;
mutex_lock(&data->update_lock);
- ad525x_write(client, reg, value);
- if (reg & AD525X_I2C_EEPROM)
+ dpot_write(data, reg, value);
+ if (reg & DPOT_ADDR_EEPROM)
msleep(26); /* Sleep while the EEPROM updates */
mutex_unlock(&data->update_lock);
@@ -146,11 +276,10 @@ static ssize_t sysfs_do_cmd(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count, u32 reg)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dpot_data *data = i2c_get_clientdata(client);
+ struct dpot_data *data = dev_get_drvdata(dev);
mutex_lock(&data->update_lock);
- ad525x_write(client, reg, 0);
+ dpot_write(data, reg, 0);
mutex_unlock(&data->update_lock);
return count;
@@ -182,51 +311,58 @@ static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, set_##name);
DPOT_DEVICE_SHOW(name, reg) \
static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, NULL);
-DPOT_DEVICE_SHOW_SET(rdac0, AD525X_I2C_RDAC | AD525X_RDAC0);
-DPOT_DEVICE_SHOW_SET(eeprom0, AD525X_I2C_EEPROM | AD525X_RDAC0);
-DPOT_DEVICE_SHOW_ONLY(tolerance0, AD525X_I2C_EEPROM | AD525X_TOL_RDAC0);
-
-DPOT_DEVICE_SHOW_SET(rdac1, AD525X_I2C_RDAC | AD525X_RDAC1);
-DPOT_DEVICE_SHOW_SET(eeprom1, AD525X_I2C_EEPROM | AD525X_RDAC1);
-DPOT_DEVICE_SHOW_ONLY(tolerance1, AD525X_I2C_EEPROM | AD525X_TOL_RDAC1);
-
-DPOT_DEVICE_SHOW_SET(rdac2, AD525X_I2C_RDAC | AD525X_RDAC2);
-DPOT_DEVICE_SHOW_SET(eeprom2, AD525X_I2C_EEPROM | AD525X_RDAC2);
-DPOT_DEVICE_SHOW_ONLY(tolerance2, AD525X_I2C_EEPROM | AD525X_TOL_RDAC2);
-
-DPOT_DEVICE_SHOW_SET(rdac3, AD525X_I2C_RDAC | AD525X_RDAC3);
-DPOT_DEVICE_SHOW_SET(eeprom3, AD525X_I2C_EEPROM | AD525X_RDAC3);
-DPOT_DEVICE_SHOW_ONLY(tolerance3, AD525X_I2C_EEPROM | AD525X_TOL_RDAC3);
-
-static struct attribute *ad525x_attributes_wipers[4][4] = {
- {
- &dev_attr_rdac0.attr,
- &dev_attr_eeprom0.attr,
- &dev_attr_tolerance0.attr,
- NULL
- }, {
- &dev_attr_rdac1.attr,
- &dev_attr_eeprom1.attr,
- &dev_attr_tolerance1.attr,
- NULL
- }, {
- &dev_attr_rdac2.attr,
- &dev_attr_eeprom2.attr,
- &dev_attr_tolerance2.attr,
- NULL
- }, {
- &dev_attr_rdac3.attr,
- &dev_attr_eeprom3.attr,
- &dev_attr_tolerance3.attr,
- NULL
- }
+DPOT_DEVICE_SHOW_SET(rdac0, DPOT_ADDR_RDAC | DPOT_RDAC0);
+DPOT_DEVICE_SHOW_SET(eeprom0, DPOT_ADDR_EEPROM | DPOT_RDAC0);
+DPOT_DEVICE_SHOW_ONLY(tolerance0, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC0);
+
+DPOT_DEVICE_SHOW_SET(rdac1, DPOT_ADDR_RDAC | DPOT_RDAC1);
+DPOT_DEVICE_SHOW_SET(eeprom1, DPOT_ADDR_EEPROM | DPOT_RDAC1);
+DPOT_DEVICE_SHOW_ONLY(tolerance1, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC1);
+
+DPOT_DEVICE_SHOW_SET(rdac2, DPOT_ADDR_RDAC | DPOT_RDAC2);
+DPOT_DEVICE_SHOW_SET(eeprom2, DPOT_ADDR_EEPROM | DPOT_RDAC2);
+DPOT_DEVICE_SHOW_ONLY(tolerance2, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC2);
+
+DPOT_DEVICE_SHOW_SET(rdac3, DPOT_ADDR_RDAC | DPOT_RDAC3);
+DPOT_DEVICE_SHOW_SET(eeprom3, DPOT_ADDR_EEPROM | DPOT_RDAC3);
+DPOT_DEVICE_SHOW_ONLY(tolerance3, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC3);
+
+DPOT_DEVICE_SHOW_SET(rdac4, DPOT_ADDR_RDAC | DPOT_RDAC4);
+DPOT_DEVICE_SHOW_SET(eeprom4, DPOT_ADDR_EEPROM | DPOT_RDAC4);
+DPOT_DEVICE_SHOW_ONLY(tolerance4, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC4);
+
+DPOT_DEVICE_SHOW_SET(rdac5, DPOT_ADDR_RDAC | DPOT_RDAC5);
+DPOT_DEVICE_SHOW_SET(eeprom5, DPOT_ADDR_EEPROM | DPOT_RDAC5);
+DPOT_DEVICE_SHOW_ONLY(tolerance5, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC5);
+
+static const struct attribute *dpot_attrib_wipers[] = {
+ &dev_attr_rdac0.attr,
+ &dev_attr_rdac1.attr,
+ &dev_attr_rdac2.attr,
+ &dev_attr_rdac3.attr,
+ &dev_attr_rdac4.attr,
+ &dev_attr_rdac5.attr,
+ NULL
+};
+
+static const struct attribute *dpot_attrib_eeprom[] = {
+ &dev_attr_eeprom0.attr,
+ &dev_attr_eeprom1.attr,
+ &dev_attr_eeprom2.attr,
+ &dev_attr_eeprom3.attr,
+ &dev_attr_eeprom4.attr,
+ &dev_attr_eeprom5.attr,
+ NULL
};
-static const struct attribute_group ad525x_group_wipers[] = {
- {.attrs = ad525x_attributes_wipers[AD525X_RDAC0]},
- {.attrs = ad525x_attributes_wipers[AD525X_RDAC1]},
- {.attrs = ad525x_attributes_wipers[AD525X_RDAC2]},
- {.attrs = ad525x_attributes_wipers[AD525X_RDAC3]},
+static const struct attribute *dpot_attrib_tolerance[] = {
+ &dev_attr_tolerance0.attr,
+ &dev_attr_tolerance1.attr,
+ &dev_attr_tolerance2.attr,
+ &dev_attr_tolerance3.attr,
+ &dev_attr_tolerance4.attr,
+ &dev_attr_tolerance5.attr,
+ NULL
};
/* ------------------------------------------------------------------------- */
@@ -240,10 +376,10 @@ set_##_name(struct device *dev, \
} \
static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, NULL, set_##_name);
-DPOT_DEVICE_DO_CMD(inc_all, AD525X_INC_ALL);
-DPOT_DEVICE_DO_CMD(dec_all, AD525X_DEC_ALL);
-DPOT_DEVICE_DO_CMD(inc_all_6db, AD525X_INC_ALL_6DB);
-DPOT_DEVICE_DO_CMD(dec_all_6db, AD525X_DEC_ALL_6DB);
+DPOT_DEVICE_DO_CMD(inc_all, DPOT_INC_ALL);
+DPOT_DEVICE_DO_CMD(dec_all, DPOT_DEC_ALL);
+DPOT_DEVICE_DO_CMD(inc_all_6db, DPOT_INC_ALL_6DB);
+DPOT_DEVICE_DO_CMD(dec_all_6db, DPOT_DEC_ALL_6DB);
static struct attribute *ad525x_attributes_commands[] = {
&dev_attr_inc_all.attr,
@@ -257,74 +393,44 @@ static const struct attribute_group ad525x_group_commands = {
.attrs = ad525x_attributes_commands,
};
-/* ------------------------------------------------------------------------- */
-
-/* i2c device functions */
-
-/**
- * ad525x_read - return the value contained in the specified register
- * on the AD5258 device.
- * @client: value returned from i2c_new_device()
- * @reg: the register to read
- *
- * If the tolerance register is specified, 2 bytes are returned.
- * Otherwise, 1 byte is returned. A negative value indicates an error
- * occurred while reading the register.
- */
-static s32 ad525x_read(struct i2c_client *client, u8 reg)
+__devinit int ad_dpot_add_files(struct device *dev,
+ unsigned features, unsigned rdac)
{
- struct dpot_data *data = i2c_get_clientdata(client);
+ int err = sysfs_create_file(&dev->kobj,
+ dpot_attrib_wipers[rdac]);
+ if (features & F_CMD_EEP)
+ err |= sysfs_create_file(&dev->kobj,
+ dpot_attrib_eeprom[rdac]);
+ if (features & F_CMD_TOL)
+ err |= sysfs_create_file(&dev->kobj,
+ dpot_attrib_tolerance[rdac]);
- if ((reg & AD525X_REG_TOL) || (data->max_pos > 256))
- return i2c_smbus_read_word_data(client, (reg & 0xF8) |
- ((reg & 0x7) << 1));
- else
- return i2c_smbus_read_byte_data(client, reg);
+ if (err)
+ dev_err(dev, "failed to register sysfs hooks for RDAC%d\n",
+ rdac);
+
+ return err;
}
-/**
- * ad525x_write - store the given value in the specified register on
- * the AD5258 device.
- * @client: value returned from i2c_new_device()
- * @reg: the register to write
- * @value: the byte to store in the register
- *
- * For certain instructions that do not require a data byte, "NULL"
- * should be specified for the "value" parameter. These instructions
- * include NOP, RESTORE_FROM_EEPROM, and STORE_TO_EEPROM.
- *
- * A negative return value indicates an error occurred while reading
- * the register.
- */
-static s32 ad525x_write(struct i2c_client *client, u8 reg, u16 value)
+inline void ad_dpot_remove_files(struct device *dev,
+ unsigned features, unsigned rdac)
{
- struct dpot_data *data = i2c_get_clientdata(client);
-
- /* Only write the instruction byte for certain commands */
- if (reg & AD525X_I2C_CMD)
- return i2c_smbus_write_byte(client, reg);
-
- if (data->max_pos > 256)
- return i2c_smbus_write_word_data(client, (reg & 0xF8) |
- ((reg & 0x7) << 1), value);
- else
- /* All other registers require instruction + data bytes */
- return i2c_smbus_write_byte_data(client, reg, value);
+ sysfs_remove_file(&dev->kobj,
+ dpot_attrib_wipers[rdac]);
+ if (features & F_CMD_EEP)
+ sysfs_remove_file(&dev->kobj,
+ dpot_attrib_eeprom[rdac]);
+ if (features & F_CMD_TOL)
+ sysfs_remove_file(&dev->kobj,
+ dpot_attrib_tolerance[rdac]);
}
-static int ad525x_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+__devinit int ad_dpot_probe(struct device *dev,
+ struct ad_dpot_bus_data *bdata, const struct ad_dpot_id *id)
{
- struct device *dev = &client->dev;
- struct dpot_data *data;
- int err = 0;
-
- dev_dbg(dev, "%s\n", __func__);
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
- dev_err(dev, "missing I2C functionality for this driver\n");
- goto exit;
- }
+ struct dpot_data *data;
+ int i, err = 0;
data = kzalloc(sizeof(struct dpot_data), GFP_KERNEL);
if (!data) {
@@ -332,183 +438,74 @@ static int ad525x_probe(struct i2c_client *client,
goto exit;
}
- i2c_set_clientdata(client, data);
+ dev_set_drvdata(dev, data);
mutex_init(&data->update_lock);
- switch (id->driver_data) {
- case AD5258_ID:
- data->max_pos = AD5258_MAX_POSITION;
- err = sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- break;
- case AD5259_ID:
- data->max_pos = AD5259_MAX_POSITION;
- err = sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- break;
- case AD5251_ID:
- data->max_pos = AD5251_MAX_POSITION;
- err = sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC3]);
- err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
- break;
- case AD5252_ID:
- data->max_pos = AD5252_MAX_POSITION;
- err = sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC3]);
- err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
- break;
- case AD5253_ID:
- data->max_pos = AD5253_MAX_POSITION;
- err = sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC2]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC3]);
- err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
- break;
- case AD5254_ID:
- data->max_pos = AD5254_MAX_POSITION;
- err = sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC2]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC3]);
- err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
- break;
- case AD5255_ID:
- data->max_pos = AD5255_MAX_POSITION;
- err = sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- err |= sysfs_create_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC2]);
- err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
- break;
- default:
- err = -ENODEV;
- goto exit_free;
- }
+ data->bdata = *bdata;
+ data->devid = id->devid;
+
+ data->max_pos = 1 << DPOT_MAX_POS(data->devid);
+ data->rdac_mask = data->max_pos - 1;
+ data->feat = DPOT_FEAT(data->devid);
+ data->uid = DPOT_UID(data->devid);
+ data->wipers = DPOT_WIPERS(data->devid);
+
+ for (i = DPOT_RDAC0; i <= DPOT_RDAC5; i++)
+ if (data->wipers & (1 << i)) {
+ err = ad_dpot_add_files(dev, data->feat, i);
+ if (err)
+ goto exit_remove_files;
+ /* power-up midscale */
+ if (data->feat & F_RDACS_WONLY)
+ data->rdac_cache[i] = data->max_pos / 2;
+ }
+
+ if (data->feat & F_CMD_INC)
+ err = sysfs_create_group(&dev->kobj, &ad525x_group_commands);
if (err) {
dev_err(dev, "failed to register sysfs hooks\n");
goto exit_free;
}
- data->devid = id->driver_data;
- data->rdac_mask = data->max_pos - 1;
-
dev_info(dev, "%s %d-Position Digital Potentiometer registered\n",
id->name, data->max_pos);
return 0;
+exit_remove_files:
+ for (i = DPOT_RDAC0; i <= DPOT_RDAC5; i++)
+ if (data->wipers & (1 << i))
+ ad_dpot_remove_files(dev, data->feat, i);
+
exit_free:
kfree(data);
- i2c_set_clientdata(client, NULL);
+ dev_set_drvdata(dev, NULL);
exit:
- dev_err(dev, "failed to create client\n");
+ dev_err(dev, "failed to create client for %s ID 0x%lX\n",
+ id->name, id->devid);
return err;
}
+EXPORT_SYMBOL(ad_dpot_probe);
-static int __devexit ad525x_remove(struct i2c_client *client)
+__devexit int ad_dpot_remove(struct device *dev)
{
- struct dpot_data *data = i2c_get_clientdata(client);
- struct device *dev = &client->dev;
-
- switch (data->devid) {
- case AD5258_ID:
- case AD5259_ID:
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- break;
- case AD5251_ID:
- case AD5252_ID:
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC3]);
- sysfs_remove_group(&dev->kobj, &ad525x_group_commands);
- break;
- case AD5253_ID:
- case AD5254_ID:
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC2]);
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC3]);
- sysfs_remove_group(&dev->kobj, &ad525x_group_commands);
- break;
- case AD5255_ID:
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC0]);
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC1]);
- sysfs_remove_group(&dev->kobj,
- &ad525x_group_wipers[AD525X_RDAC2]);
- sysfs_remove_group(&dev->kobj, &ad525x_group_commands);
- break;
- }
+ struct dpot_data *data = dev_get_drvdata(dev);
+ int i;
+
+ for (i = DPOT_RDAC0; i <= DPOT_RDAC5; i++)
+ if (data->wipers & (1 << i))
+ ad_dpot_remove_files(dev, data->feat, i);
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
}
+EXPORT_SYMBOL(ad_dpot_remove);
-static const struct i2c_device_id ad525x_idtable[] = {
- {"ad5258", AD5258_ID},
- {"ad5259", AD5259_ID},
- {"ad5251", AD5251_ID},
- {"ad5252", AD5252_ID},
- {"ad5253", AD5253_ID},
- {"ad5254", AD5254_ID},
- {"ad5255", AD5255_ID},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, ad525x_idtable);
-
-static struct i2c_driver ad525x_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = DRIVER_NAME,
- },
- .id_table = ad525x_idtable,
- .probe = ad525x_probe,
- .remove = __devexit_p(ad525x_remove),
-};
-
-static int __init ad525x_init(void)
-{
- return i2c_add_driver(&ad525x_driver);
-}
-
-module_init(ad525x_init);
-
-static void __exit ad525x_exit(void)
-{
- i2c_del_driver(&ad525x_driver);
-}
-
-module_exit(ad525x_exit);
MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>, "
- "Michael Hennerich <hennerich@blackfin.uclinux.org>, ");
-MODULE_DESCRIPTION("AD5258/9 digital potentiometer driver");
+ "Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Digital potentiometer driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h
new file mode 100644
index 000000000000..99b388e12f5f
--- /dev/null
+++ b/drivers/misc/ad525x_dpot.h
@@ -0,0 +1,173 @@
+/*
+ * Driver for the Analog Devices digital potentiometers
+ *
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _AD_DPOT_H_
+#define _AD_DPOT_H_
+
+#include <linux/types.h>
+
+#define DPOT_CONF(features, wipers, max_pos, uid) \
+ (((features) << 18) | (((wipers) & 0xFF) << 10) | \
+ ((max_pos & 0xF) << 6) | (uid & 0x3F))
+
+#define DPOT_UID(conf) (conf & 0x3F)
+#define DPOT_MAX_POS(conf) ((conf >> 6) & 0xF)
+#define DPOT_WIPERS(conf) ((conf >> 10) & 0xFF)
+#define DPOT_FEAT(conf) (conf >> 18)
+
+#define BRDAC0 (1 << 0)
+#define BRDAC1 (1 << 1)
+#define BRDAC2 (1 << 2)
+#define BRDAC3 (1 << 3)
+#define BRDAC4 (1 << 4)
+#define BRDAC5 (1 << 5)
+
+#define F_CMD_INC (1 << 0) /* Features INC/DEC ALL, 6dB */
+#define F_CMD_EEP (1 << 1) /* Features EEPROM */
+#define F_CMD_TOL (1 << 2) /* RDACS are Read/Write + Tolerance REG */
+#define F_RDACS_RW (1 << 3) /* RDACS are Read/Write + Tolerance REG */
+#define F_RDACS_WONLY (1 << 4) /* RDACS are Write only */
+#define F_AD_APPDATA (1 << 5) /* RDAC Address append to data */
+#define F_SPI_8BIT (1 << 6) /* All SPI XFERS are 8-bit */
+#define F_SPI_16BIT (1 << 7) /* All SPI XFERS are 16-bit */
+#define F_SPI_24BIT (1 << 8) /* All SPI XFERS are 24-bit */
+
+#define F_RDACS_RW_TOL (F_RDACS_RW | F_CMD_EEP | F_CMD_TOL)
+#define F_RDACS_RW_EEP (F_RDACS_RW | F_CMD_EEP)
+#define F_SPI (F_SPI_8BIT | F_SPI_16BIT | F_SPI_24BIT)
+
+enum dpot_devid {
+ AD5258_ID = DPOT_CONF(F_RDACS_RW_TOL, BRDAC0, 6, 0), /* I2C */
+ AD5259_ID = DPOT_CONF(F_RDACS_RW_TOL, BRDAC0, 8, 1),
+ AD5251_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+ BRDAC0 | BRDAC3, 6, 2),
+ AD5252_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+ BRDAC0 | BRDAC3, 8, 3),
+ AD5253_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+ BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 6, 4),
+ AD5254_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+ BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 8, 5),
+ AD5255_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+ BRDAC0 | BRDAC1 | BRDAC2, 9, 6),
+ AD5160_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 8, 7), /* SPI */
+ AD5161_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 8, 8),
+ AD5162_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1, 8, 9),
+ AD5165_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 8, 10),
+ AD5200_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 8, 11),
+ AD5201_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 5, 12),
+ AD5203_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 6, 13),
+ AD5204_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 8, 14),
+ AD5206_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3 | BRDAC4 | BRDAC5,
+ 8, 15),
+ AD5207_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1, 8, 16),
+ AD5231_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_24BIT,
+ BRDAC0, 10, 17),
+ AD5232_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_16BIT,
+ BRDAC0 | BRDAC1, 8, 18),
+ AD5233_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_16BIT,
+ BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 6, 19),
+ AD5235_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_24BIT,
+ BRDAC0 | BRDAC1, 10, 20),
+ AD5260_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 8, 21),
+ AD5262_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1, 8, 22),
+ AD5263_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 8, 23),
+ AD5290_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 8, 24),
+ AD5291_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 8, 25),
+ AD5292_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 26),
+ AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27),
+ AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 7, 28),
+ AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ BRDAC0, 8, 29),
+ AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1, 8, 30),
+ AD8403_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+ BRDAC0 | BRDAC1 | BRDAC2, 8, 31),
+ ADN2850_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_24BIT,
+ BRDAC0 | BRDAC1, 10, 32),
+};
+
+#define DPOT_RDAC0 0
+#define DPOT_RDAC1 1
+#define DPOT_RDAC2 2
+#define DPOT_RDAC3 3
+#define DPOT_RDAC4 4
+#define DPOT_RDAC5 5
+
+#define DPOT_RDAC_MASK 0x1F
+
+#define DPOT_REG_TOL 0x18
+#define DPOT_TOL_RDAC0 (DPOT_REG_TOL | DPOT_RDAC0)
+#define DPOT_TOL_RDAC1 (DPOT_REG_TOL | DPOT_RDAC1)
+#define DPOT_TOL_RDAC2 (DPOT_REG_TOL | DPOT_RDAC2)
+#define DPOT_TOL_RDAC3 (DPOT_REG_TOL | DPOT_RDAC3)
+#define DPOT_TOL_RDAC4 (DPOT_REG_TOL | DPOT_RDAC4)
+#define DPOT_TOL_RDAC5 (DPOT_REG_TOL | DPOT_RDAC5)
+
+/* RDAC-to-EEPROM Interface Commands */
+#define DPOT_ADDR_RDAC (0x00 << 5)
+#define DPOT_ADDR_EEPROM (0x01 << 5)
+#define DPOT_ADDR_CMD (0x80)
+
+#define DPOT_DEC_ALL_6DB (DPOT_ADDR_CMD | (0x4 << 3))
+#define DPOT_INC_ALL_6DB (DPOT_ADDR_CMD | (0x9 << 3))
+#define DPOT_DEC_ALL (DPOT_ADDR_CMD | (0x6 << 3))
+#define DPOT_INC_ALL (DPOT_ADDR_CMD | (0xB << 3))
+
+#define DPOT_SPI_RDAC 0xB0
+#define DPOT_SPI_EEPROM 0x30
+#define DPOT_SPI_READ_RDAC 0xA0
+#define DPOT_SPI_READ_EEPROM 0x90
+#define DPOT_SPI_DEC_ALL_6DB 0x50
+#define DPOT_SPI_INC_ALL_6DB 0xD0
+#define DPOT_SPI_DEC_ALL 0x70
+#define DPOT_SPI_INC_ALL 0xF0
+
+/* AD5291/2/3 use special commands */
+#define DPOT_AD5291_RDAC 0x01
+#define DPOT_AD5291_READ_RDAC 0x02
+
+struct dpot_data;
+
+struct ad_dpot_bus_ops {
+ int (*read_d8) (void *client);
+ int (*read_r8d8) (void *client, u8 reg);
+ int (*read_r8d16) (void *client, u8 reg);
+ int (*write_d8) (void *client, u8 val);
+ int (*write_r8d8) (void *client, u8 reg, u8 val);
+ int (*write_r8d16) (void *client, u8 reg, u16 val);
+};
+
+struct ad_dpot_bus_data {
+ void *client;
+ const struct ad_dpot_bus_ops *bops;
+};
+
+struct ad_dpot_id {
+ char *name;
+ unsigned long devid;
+};
+
+int ad_dpot_probe(struct device *dev, struct ad_dpot_bus_data *bdata, const struct ad_dpot_id *id);
+int ad_dpot_remove(struct device *dev);
+
+#endif