diff options
| -rw-r--r-- | drivers/gpu/drm/bridge/tc358767.c | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index e1ce4954e6af..42f03a985ac0 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -80,6 +80,13 @@ #define DP0_VIDSRC_DSI_RX (1 << 0) #define DP0_VIDSRC_DPI_RX (2 << 0) #define DP0_VIDSRC_COLOR_BAR (3 << 0) +#define SYSRSTENB 0x050c +#define ENBI2C (1 << 0) +#define ENBLCD0 (1 << 2) +#define ENBBM (1 << 3) +#define ENBDSIRX (1 << 4) +#define ENBREG (1 << 5) +#define ENBHDCP (1 << 8) #define GPIOM 0x0540 #define GPIOC 0x0544 #define GPIOO 0x0548 @@ -1597,6 +1604,22 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) tc->assr = (tc->rev == 0x6601); /* Enable ASSR for eDP panels */ + if (!tc->reset_gpio) { + /* + * If the reset pin isn't present, do a software reset. It isn't + * as thorough as the hardware reset, as we can't reset the I2C + * communication block for obvious reasons, but it's getting the + * chip into a defined state. + */ + regmap_update_bits(tc->regmap, SYSRSTENB, + ENBLCD0 | ENBBM | ENBDSIRX | ENBREG | ENBHDCP, + 0); + regmap_update_bits(tc->regmap, SYSRSTENB, + ENBLCD0 | ENBBM | ENBDSIRX | ENBREG | ENBHDCP, + ENBLCD0 | ENBBM | ENBDSIRX | ENBREG | ENBHDCP); + usleep_range(5000, 10000); + } + if (tc->hpd_pin >= 0) { u32 lcnt_reg = tc->hpd_pin == 0 ? INT_GP0_LCNT : INT_GP1_LCNT; u32 h_lc = INT_GPIO_H(tc->hpd_pin) | INT_GPIO_LC(tc->hpd_pin); |