diff options
| -rw-r--r-- | drivers/net/ethernet/intel/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe.h | 32 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 53 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 732 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 32 |
6 files changed, 861 insertions, 1 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 546efe30c9b8..79b07ec6726f 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -220,6 +220,17 @@ config IXGBE_DCB If unsure, say N. +config IXGBE_PTP + bool "PTP Clock Support" + default n + depends on IXGBE && PTP_1588_CLOCK + ---help--- + Say Y here if you want support for 1588 Timestamping with a + PHC device, using the PTP 1588 Clock support. This is + required to enable timestamping support for the device. + + If unsure, say N. + config IXGBEVF tristate "Intel(R) 82599 Virtual Function Ethernet support" depends on PCI_MSI diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index 0708d7eb4668..0bdf06bc5c49 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -39,4 +39,6 @@ ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o +ixgbe-$(CONFIG_IXGBE_PTP) += ixgbe_ptp.o + ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 2262bf715b56..c90fbd269b8d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -36,6 +36,12 @@ #include <linux/aer.h> #include <linux/if_vlan.h> +#ifdef CONFIG_IXGBE_PTP +#include <linux/clocksource.h> +#include <linux/net_tstamp.h> +#include <linux/ptp_clock_kernel.h> +#endif /* CONFIG_IXGBE_PTP */ + #include "ixgbe_type.h" #include "ixgbe_common.h" #include "ixgbe_dcb.h" @@ -96,6 +102,7 @@ #define IXGBE_TX_FLAGS_FCOE (u32)(1 << 5) #define IXGBE_TX_FLAGS_FSO (u32)(1 << 6) #define IXGBE_TX_FLAGS_TXSW (u32)(1 << 7) +#define IXGBE_TX_FLAGS_TSTAMP (u32)(1 << 8) #define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000 #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000 #define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT 29 @@ -458,6 +465,7 @@ struct ixgbe_adapter { #define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 7) #define IXGBE_FLAG2_RSS_FIELD_IPV4_UDP (u32)(1 << 8) #define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP (u32)(1 << 9) +#define IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED (u32)(1 << 10) /* Tx fast path data */ int num_tx_queues; @@ -545,6 +553,17 @@ struct ixgbe_adapter { u32 interrupt_event; u32 led_reg; +#ifdef CONFIG_IXGBE_PTP + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_caps; + unsigned long last_overflow_check; + spinlock_t tmreg_lock; + struct cyclecounter cc; + struct timecounter tc; + u32 base_incval; + u32 cycle_speed; +#endif /* CONFIG_IXGBE_PTP */ + /* SR-IOV */ DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS); unsigned int num_vfs; @@ -689,4 +708,17 @@ static inline struct netdev_queue *txring_txq(const struct ixgbe_ring *ring) return netdev_get_tx_queue(ring->netdev, ring->queue_index); } +#ifdef CONFIG_IXGBE_PTP +extern void ixgbe_ptp_init(struct ixgbe_adapter *adapter); +extern void ixgbe_ptp_stop(struct ixgbe_adapter *adapter); +extern void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); +extern void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb); +extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb); +extern int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, + struct ifreq *ifr, int cmd); +extern void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter); +#endif /* CONFIG_IXGBE_PTP */ + #endif /* _IXGBE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 1693ec3d4046..9a83c4055c5f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -789,6 +789,13 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, total_bytes += tx_buffer->bytecount; total_packets += tx_buffer->gso_segs; +#ifdef CONFIG_IXGBE_PTP + if (unlikely(tx_buffer->tx_flags & + IXGBE_TX_FLAGS_TSTAMP)) + ixgbe_ptp_tx_hwtstamp(q_vector, + tx_buffer->skb); + +#endif /* free the skb */ dev_kfree_skb_any(tx_buffer->skb); @@ -1389,6 +1396,11 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, ixgbe_rx_checksum(rx_ring, rx_desc, skb); +#ifdef CONFIG_IXGBE_PTP + if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS)) + ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); +#endif + if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan); __vlan_hwaccel_put_tag(skb, vid); @@ -5387,6 +5399,11 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) flow_rx = false; break; } + +#ifdef CONFIG_IXGBE_PTP + ixgbe_ptp_start_cyclecounter(adapter); +#endif + e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? "10 Gbps" : @@ -5424,6 +5441,10 @@ static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter) if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB) adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; +#ifdef CONFIG_IXGBE_PTP + ixgbe_ptp_start_cyclecounter(adapter); +#endif + e_info(drv, "NIC Link is Down\n"); netif_carrier_off(netdev); } @@ -5723,6 +5744,9 @@ static void ixgbe_service_task(struct work_struct *work) ixgbe_watchdog_subtask(adapter); ixgbe_fdir_reinit_subtask(adapter); ixgbe_check_hang_subtask(adapter); +#ifdef CONFIG_IXGBE_PTP + ixgbe_ptp_overflow_check(adapter); +#endif ixgbe_service_event_complete(adapter); } @@ -5873,6 +5897,11 @@ static __le32 ixgbe_tx_cmd_type(u32 tx_flags) if (tx_flags & IXGBE_TX_FLAGS_HW_VLAN) cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_VLE); +#ifdef CONFIG_IXGBE_PTP + if (tx_flags & IXGBE_TX_FLAGS_TSTAMP) + cmd_type |= cpu_to_le32(IXGBE_ADVTXD_MAC_TSTAMP); +#endif + /* set segmentation enable bits for TSO/FSO */ #ifdef IXGBE_FCOE if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FSO)) @@ -6263,6 +6292,13 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; } +#ifdef CONFIG_IXGBE_PTP + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + tx_flags |= IXGBE_TX_FLAGS_TSTAMP; + } +#endif + #ifdef CONFIG_PCI_IOV /* * Use the l2switch_enable flag - would be false if the DMA @@ -6415,7 +6451,14 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); + switch (cmd) { +#ifdef CONFIG_IXGBE_PTP + case SIOCSHWTSTAMP: + return ixgbe_ptp_hwtstamp_ioctl(adapter, req, cmd); +#endif + default: + return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); + } } /** @@ -7202,6 +7245,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); +#ifdef CONFIG_IXGBE_PTP + ixgbe_ptp_init(adapter); +#endif /* CONFIG_IXGBE_PTP*/ + /* save off EEPROM version number */ hw->eeprom.ops.read(hw, 0x2e, &adapter->eeprom_verh); hw->eeprom.ops.read(hw, 0x2d, &adapter->eeprom_verl); @@ -7330,6 +7377,10 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) set_bit(__IXGBE_DOWN, &adapter->state); cancel_work_sync(&adapter->service_task); +#ifdef CONFIG_IXGBE_PTP + ixgbe_ptp_stop(adapter); +#endif + #ifdef CONFIG_IXGBE_DCA if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c new file mode 100644 index 000000000000..0b6553ee18af --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -0,0 +1,732 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ +#include "ixgbe.h" +#include <linux/export.h> + +/* + * The 82599 and the X540 do not have true 64bit nanosecond scale + * counter registers. Instead, SYSTIME is defined by a fixed point + * system which allows the user to define the scale counter increment + * value at every level change of the oscillator driving the SYSTIME + * value. For both devices the TIMINCA:IV field defines this + * increment. On the X540 device, 31 bits are provided. However on the + * 82599 only provides 24 bits. The time unit is determined by the + * clock frequency of the oscillator in combination with the TIMINCA + * register. When these devices link at 10Gb the oscillator has a + * period of 6.4ns. In order to convert the scale counter into + * nanoseconds the cyclecounter and timecounter structures are + * used. The SYSTIME registers need to be converted to ns values by use + * of only a right shift (division by power of 2). The following math + * determines the largest incvalue that will fit into the available + * bits in the TIMINCA register. + * + * PeriodWidth: Number of bits to store the clock period + * MaxWidth: The maximum width value of the TIMINCA register + * Period: The clock period for the oscillator + * round(): discard the fractional portion of the calculation + * + * Period * [ 2 ^ ( MaxWidth - PeriodWidth ) ] + * + * For the X540, MaxWidth is 31 bits, and the base period is 6.4 ns + * For the 82599, MaxWidth is 24 bits, and the base period is 6.4 ns + * + * The period also changes based on the link speed: + * At 10Gb link or no link, the period remains the same. + * At 1Gb link, the period is multiplied by 10. (64ns) + * At 100Mb link, the period is multiplied by 100. (640ns) + * + * The calculated value allows us to right shift the SYSTIME register + * value in order to quickly convert it into a nanosecond clock, + * while allowing for the maximum possible adjustment value. + * + * These diagrams are only for the 10Gb link period + * + * SYSTIMEH SYSTIMEL + * +--------------+ +--------------+ + * X540 | 32 | | 1 | 3 | 28 | + * *--------------+ +--------------+ + * \________ 36 bits ______/ fract + * + * +--------------+ +--------------+ + * 82599 | 32 | | 8 | 3 | 21 | + * *--------------+ +--------------+ + * \________ 43 bits ______/ fract + * + * The 36 bit X540 SYSTIME overflows every + * 2^36 * 10^-9 / 60 = 1.14 minutes or 69 seconds + * + * The 43 bit 82599 SYSTIME overflows every + * 2^43 * 10^-9 / 3600 = 2.4 hours + */ +#define IXGBE_INCVAL_10GB 0x66666666 +#define IXGBE_INCVAL_1GB 0x40000000 +#define IXGBE_INCVAL_100 0x50000000 + +#define IXGBE_INCVAL_SHIFT_10GB 28 +#define IXGBE_INCVAL_SHIFT_1GB 24 +#define IXGBE_INCVAL_SHIFT_100 21 + +#define IXGBE_INCVAL_SHIFT_82599 7 +#define IXGBE_INCPER_SHIFT_82599 24 +#define IXGBE_MAX_TIMEADJ_VALUE 0x7FFFFFFFFFFFFFFFULL + +#define IXGBE_OVERFLOW_PERIOD (HZ * 30) + +/** + * ixgbe_ptp_read - read raw cycle counter (to be used by time counter) + * @cc - the cyclecounter structure + * + * this function reads the cyclecounter registers and is called by the + * cyclecounter structure used to construct a ns counter from the + * arbitrary fixed point registers + */ +static cycle_t ixgbe_ptp_read(const struct cyclecounter *cc) +{ + struct ixgbe_adapter *adapter = + container_of(cc, struct ixgbe_adapter, cc); + struct ixgbe_hw *hw = &adapter->hw; + u64 stamp = 0; + + stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML); + stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32; + + return stamp; +} + +/** + * ixgbe_ptp_adjfreq + * @ptp - the ptp clock structure + * @ppb - parts per billion adjustment from base + * + * adjust the frequency of the ptp cycle counter by the + * indicated ppb from the base frequency. + */ +static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + struct ixgbe_hw *hw = &adapter->hw; + u64 freq; + u32 diff, incval; + int neg_adj = 0; + + if (ppb < 0) { + neg_adj = 1; + ppb = -ppb; + } + + smp_mb(); + incval = ACCESS_ONCE(adapter->base_incval); + + freq = incval; + freq *= ppb; + diff = div_u64(freq, 1000000000ULL); + + incval = neg_adj ? (incval - diff) : (incval + diff); + + switch (hw->mac.type) { + case ixgbe_mac_X540: + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval); + break; + case ixgbe_mac_82599EB: + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, + (1 << IXGBE_INCPER_SHIFT_82599) | + incval); + break; + default: + break; + } + + return 0; +} + +/** + * ixgbe_ptp_adjtime + * @ptp - the ptp clock structure + * @delta - offset to adjust the cycle counter by + * + * adjust the timer by resetting the timecounter structure. + */ +static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + unsigned long flags; + u64 now; + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + + now = timecounter_read(&adapter->tc); + now += delta; + + /* reset the timecounter */ + timecounter_init(&adapter->tc, + &adapter->cc, + now); + + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + return 0; +} + +/** + * ixgbe_ptp_gettime + * @ptp - the ptp clock structure + * @ts - timespec structure to hold the current time value + * + * read the timecounter and return the correct value on ns, + * after converting it into a struct timespec. + */ +static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec *ts) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + u64 ns; + u32 remainder; + unsigned long flags; + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + ns = timecounter_read(&adapter->tc); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &remainder); + ts->tv_nsec = remainder; + + return 0; +} + +/** + * ixgbe_ptp_settime + * @ptp - the ptp clock structure + * @ts - the timespec containing the new time for the cycle counter + * + * reset the timecounter to use a new base value instead of the kernel + * wall timer value. + */ +static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec *ts) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + u64 ns; + unsigned long flags; + + ns = ts->tv_sec * 1000000000ULL; + ns += ts->tv_nsec; + + /* reset the timecounter */ + spin_lock_irqsave(&adapter->tmreg_lock, flags); + timecounter_init(&adapter->tc, &adapter->cc, ns); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + return 0; +} + +/** + * ixgbe_ptp_enable + * @ptp - the ptp clock structure + * @rq - the requested feature to change + * @on - whether to enable or disable the feature + * + * enable (or disable) ancillary features of the phc subsystem. + * our driver does not support any of these features + */ +static int ixgbe_ptp_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + return -ENOTSUPP; +} + +/** + * ixgbe_ptp_overflow_check - delayed work to detect SYSTIME overflow + * @work: structure containing information about this work task + * + * this work function is scheduled to continue reading the timecounter + * in order to prevent missing when the system time registers wrap + * around. This needs to be run approximately twice a minute when no + * PTP activity is occurring. + */ +void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) +{ + unsigned long elapsed_jiffies = adapter->last_overflow_check - jiffies; + struct timespec ts; + + if ((adapter->flags2 & IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED) && + (elapsed_jiffies >= IXGBE_OVERFLOW_PERIOD)) { + ixgbe_ptp_gettime(&adapter->ptp_caps, &ts); + adapter->last_overflow_check = jiffies; + } +} + +/** + * ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp + * @q_vector: structure containing interrupt and ring information + * @skb: particular skb to send timestamp with + * + * if the timestamp is valid, we convert it into the timecounter ns + * value, then store that result into the shhwtstamps structure which + * is passed up the network stack + */ +void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb) +{ + struct ixgbe_adapter *adapter; + struct ixgbe_hw *hw; + struct skb_shared_hwtstamps shhwtstamps; + u64 regval = 0, ns; + u32 tsynctxctl; + unsigned long flags; + + /* we cannot process timestamps on a ring without a q_vector */ + if (!q_vector || !q_vector->adapter) + return; + + adapter = q_vector->adapter; + hw = &adapter->hw; + + tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPL); + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPH) << 32; + + /* + * if TX timestamp is not valid, exit after clearing the + * timestamp registers + */ + if (!(tsynctxctl & IXGBE_TSYNCTXCTL_VALID)) + return; + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + ns = timecounter_cyc2time(&adapter->tc, regval); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + shhwtstamps.hwtstamp = ns_to_ktime(ns); + skb_tstamp_tx(skb, &shhwtstamps); +} + +/** + * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp + * @q_vector: structure containing interrupt and ring information + * @skb: particular skb to send timestamp with + * + * if the timestamp is valid, we convert it into the timecounter ns + * value, then store that result into the shhwtstamps structure which + * is passed up the network stack + */ +void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb) +{ + struct ixgbe_adapter *adapter; + struct ixgbe_hw *hw; + struct skb_shared_hwtstamps *shhwtstamps; + u64 regval = 0, ns; + u32 tsyncrxctl; + unsigned long flags; + + /* we cannot process timestamps on a ring without a q_vector */ + if (!q_vector || !q_vector->adapter) + return; + + adapter = q_vector->adapter; + hw = &adapter->hw; + + tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; + + /* + * If this bit is set, then the RX registers contain the time stamp. No + * other packet will be time stamped until we read these registers, so + * read the registers to make them available again. Because only one + * packet can be time stamped at a time, we know that the register + * values must belong to this one here and therefore we don't need to + * compare any of the additional attributes stored for it. + * + * If nothing went wrong, then it should have a skb_shared_tx that we + * can turn into a skb_shared_hwtstamps. + */ + if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) + return; + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + ns = timecounter_cyc2time(&adapter->tc, regval); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + shhwtstamps = skb_hwtstamps(skb); + shhwtstamps->hwtstamp = ns_to_ktime(ns); +} + +/** + * ixgbe_ptp_hwtstamp_ioctl - control hardware time stamping + * @adapter: pointer to adapter struct + * @ifreq: ioctl data + * @cmd: particular ioctl requested + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't case any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware + * filters. Not all combinations are supported, in particular event + * type has to be specified. Matching the kind of event packet is + * not supported, with the exception of "all V2 events regardless of + * level 2 or 4". + */ +int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, + struct ifreq *ifr, int cmd) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct hwtstamp_config config; + u32 tsync_tx_ctl = IXGBE_TSYNCTXCTL_ENABLED; + u32 tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED; + u32 tsync_rx_mtrl = 0; + bool is_l4 = false; + bool is_l2 = false; + u32 regval; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + /* reserved for future extensions */ + if (config.flags) + return -EINVAL; + + switch (config.tx_type) { + case HWTSTAMP_TX_OFF: + tsync_tx_ctl = 0; + case HWTSTAMP_TX_ON: + break; + default: + return -ERANGE; + } + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + tsync_rx_ctl = 0; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; + tsync_rx_mtrl = IXGBE_RXMTRL_V1_SYNC_MSG; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; + tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2; + tsync_rx_mtrl = IXGBE_RXMTRL_V2_SYNC_MSG; + is_l2 = true; + is_l4 = true; + config.rx_filter = HWTSTAMP_FILTER_SOME; + break; + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2; + tsync_rx_mtrl = IXGBE_RXMTRL_V2_DELAY_REQ_MSG; + is_l2 = true; + is_l4 = true; + config.rx_filter = HWTSTAMP_FILTER_SOME; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_EVENT: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2; + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_ALL: + default: + /* + * register RXMTRL must be set, therefore it is not + * possible to time stamp both V1 Sync and Delay_Req messages + * and hardware does not support timestamping all packets + * => return error + */ + return -ERANGE; + } + + if (hw->mac.type == ixgbe_mac_82598EB) { + if (tsync_rx_ctl | tsync_tx_ctl) + return -ERANGE; + return 0; + } + + /* define ethertype filter for timestamped packets */ + if (is_l2) + IXGBE_WRITE_REG(hw, IXGBE_ETQF(3), + (IXGBE_ETQF_FILTER_EN | /* enable filter */ + IXGBE_ETQF_1588 | /* enable timestamping */ + ETH_P_1588)); /* 1588 eth protocol type */ + else + IXGBE_WRITE_REG(hw, IXGBE_ETQF(3), 0); + +#define PTP_PORT 319 + /* L4 Queue Filter[3]: filter by destination port and protocol */ + if (is_l4) { + u32 ftqf = (IXGBE_FTQF_PROTOCOL_UDP /* UDP */ + | IXGBE_FTQF_POOL_MASK_EN /* Pool not compared */ + | IXGBE_FTQF_QUEUE_ENABLE); + + ftqf |= ((IXGBE_FTQF_PROTOCOL_COMP_MASK /* protocol check */ + & IXGBE_FTQF_DEST_PORT_MASK /* dest check */ + & IXGBE_FTQF_SOURCE_PORT_MASK) /* source check */ + << IXGBE_FTQF_5TUPLE_MASK_SHIFT); + + IXGBE_WRITE_REG(hw, IXGBE_L34T_IMIR(3), + (3 << IXGBE_IMIR_RX_QUEUE_SHIFT_82599 | + IXGBE_IMIR_SIZE_BP_82599)); + + /* enable port check */ + IXGBE_WRITE_REG(hw, IXGBE_SDPQF(3), + (htons(PTP_PORT) | + htons(PTP_PORT) << 16)); + + IXGBE_WRITE_REG(hw, IXGBE_FTQF(3), ftqf); + + tsync_rx_mtrl |= PTP_PORT << 16; + } else { + IXGBE_WRITE_REG(hw, IXGBE_FTQF(3), 0); + } + + /* enable/disable TX */ + regval = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); + regval &= ~IXGBE_TSYNCTXCTL_ENABLED; + regval |= tsync_tx_ctl; + IXGBE_WRITE_REG(hw, IXGBE_TSYNCTXCTL, regval); + + /* enable/disable RX */ + regval = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + regval &= ~(IXGBE_TSYNCRXCTL_ENABLED | IXGBE_TSYNCRXCTL_TYPE_MASK); + regval |= tsync_rx_ctl; + IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCTL, regval); + + /* define which PTP packets are time stamped */ + IXGBE_WRITE_REG(hw, IXGBE_RXMTRL, tsync_rx_mtrl); + + IXGBE_WRITE_FLUSH(hw); + + /* clear TX/RX time stamp registers, just to be sure */ + regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH); + regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH); + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +/** + * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw + * @adapter - pointer to the adapter structure + * + * this function initializes the timecounter and cyclecounter + * structures for use in generated a ns counter from the arbitrary + * fixed point cycles registers in the hardware. + * + * A change in link speed impacts the frequency of the DMA clock on + * the device, which is used to generate the cycle counter + * registers. Therefor this function is called whenever the link speed + * changes. + */ +void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 incval = 0; + u32 shift = 0; + u32 cycle_speed; + unsigned long flags; + + /** + * Determine what speed we need to set the cyclecounter + * for. It should be different for 100Mb, 1Gb, and 10Gb. Treat + * unknown speeds as 10Gb. (Hence why we can't just copy the + * link_speed. + */ + switch (adapter->link_speed) { + case IXGBE_LINK_SPEED_100_FULL: + case IXGBE_LINK_SPEED_1GB_FULL: + case IXGBE_LINK_SPEED_10GB_FULL: + cycle_speed = adapter->link_speed; + break; + default: + /* cycle speed should be 10Gb when there is no link */ + cycle_speed = IXGBE_LINK_SPEED_10GB_FULL; + break; + } + + /* Bail if the cycle speed didn't change */ + if (adapter->cycle_speed == cycle_speed) + return; + + /** + * Scale the NIC cycle counter by a large factor so that + * relatively small corrections to the frequency can be added + * or subtracted. The drawbacks of a large factor include + * (a) the clock register overflows more quickly, (b) the cycle + * counter structure must be able to convert the systime value + * to nanoseconds using only a multiplier and a right-shift, + * and (c) the value must fit within the timinca register space + * => math based on internal DMA clock rate and available bits + */ + switch (cycle_speed) { + case IXGBE_LINK_SPEED_100_FULL: + incval = IXGBE_INCVAL_100; + shift = IXGBE_INCVAL_SHIFT_100; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + incval = IXGBE_INCVAL_1GB; + shift = IXGBE_INCVAL_SHIFT_1GB; + break; + case IXGBE_LINK_SPEED_10GB_FULL: + incval = IXGBE_INCVAL_10GB; + shift = IXGBE_INCVAL_SHIFT_10GB; + break; + } + + /** + * Modify the calculated values to fit within the correct + * number of bits specified by the hardware. The 82599 doesn't + * have the same space as the X540, so bitshift the calculated + * values to fit. + */ + switch (hw->mac.type) { + case ixgbe_mac_X540: + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval); + break; + case ixgbe_mac_82599EB: + incval >>= IXGBE_INCVAL_SHIFT_82599; + shift -= IXGBE_INCVAL_SHIFT_82599; + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, + (1 << IXGBE_INCPER_SHIFT_82599) | + incval); + break; + default: + /* other devices aren't supported */ + return; + } + + /* reset the system time registers */ + IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0x00000000); + IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000); + IXGBE_WRITE_FLUSH(hw); + + /* store the new cycle speed */ + adapter->cycle_speed = cycle_speed; + + ACCESS_ONCE(adapter->base_incval) = incval; + smp_mb(); + + /* grab the ptp lock */ + spin_lock_irqsave(&adapter->tmreg_lock, flags); + + memset(&adapter->cc, 0, sizeof(adapter->cc)); + adapter->cc.read = ixgbe_ptp_read; + adapter->cc.mask = CLOCKSOURCE_MASK(64); + adapter->cc.shift = shift; + adapter->cc.mult = 1; + + /* reset the ns time counter */ + timecounter_init(&adapter->tc, &adapter->cc, + ktime_to_ns(ktime_get_real())); + + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); +} + +/** + * ixgbe_ptp_init + * @adapter - the ixgbe private adapter structure + * + * This function performs the required steps for enabling ptp + * support. If ptp support has already been loaded it simply calls the + * cyclecounter init routine and exits. + */ +void ixgbe_ptp_init(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_X540: + case ixgbe_mac_82599EB: + snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr); + adapter->ptp_caps.owner = THIS_MODULE; + adapter->ptp_caps.max_adj = 250000000; + adapter->ptp_caps.n_alarm = 0; + adapter->ptp_caps.n_ext_ts = 0; + adapter->ptp_caps.n_per_out = 0; + adapter->ptp_caps.pps = 0; + adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq; + adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime; + adapter->ptp_caps.gettime = ixgbe_ptp_gettime; + adapter->ptp_caps.settime = ixgbe_ptp_settime; + adapter->ptp_caps.enable = ixgbe_ptp_enable; + break; + default: + adapter->ptp_clock = NULL; + return; + } + + spin_lock_init(&adapter->tmreg_lock); + + ixgbe_ptp_start_cyclecounter(adapter); + + /* (Re)start the overflow check */ + adapter->flags2 |= IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED; + + adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps); + if (IS_ERR(adapter->ptp_clock)) { + adapter->ptp_clock = NULL; + e_dev_err("ptp_clock_register failed\n"); + } else + e_dev_info("registered PHC device on %s\n", netdev->name); + + return; +} + +/** + * ixgbe_ptp_stop - disable ptp device and stop the overflow check + * @adapter: pointer to adapter struct + * + * this function stops the ptp support, and cancels the delayed work. + */ +void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) +{ + /* stop the overflow check task */ + adapter->flags2 &= ~IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED; + + if (adapter->ptp_clock) { + ptp_clock_unregister(adapter->ptp_clock); + adapter->ptp_clock = NULL; + e_dev_info("removed PHC on %s\n", + adapter->netdev->name); + } +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 9559c03ab696..87d54cad20d3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1879,6 +1879,36 @@ enum { #define IXGBE_RXDCTL_RLPML_EN 0x00008000 #define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */ +#define IXGBE_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define IXGBE_TSYNCTXCTL_ENABLED 0x00000010 /* Tx timestamping enabled */ + +#define IXGBE_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define IXGBE_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define IXGBE_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define IXGBE_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define IXGBE_TSYNCRXCTL_TYPE_EVENT_V2 0x0A +#define IXGBE_TSYNCRXCTL_ENABLED 0x00000010 /* Rx Timestamping enabled */ + +#define IXGBE_RXMTRL_V1_CTRLT_MASK 0x000000FF +#define IXGBE_RXMTRL_V1_SYNC_MSG 0x00 +#define IXGBE_RXMTRL_V1_DELAY_REQ_MSG 0x01 +#define IXGBE_RXMTRL_V1_FOLLOWUP_MSG 0x02 +#define IXGBE_RXMTRL_V1_DELAY_RESP_MSG 0x03 +#define IXGBE_RXMTRL_V1_MGMT_MSG 0x04 + +#define IXGBE_RXMTRL_V2_MSGID_MASK 0x0000FF00 +#define IXGBE_RXMTRL_V2_SYNC_MSG 0x0000 +#define IXGBE_RXMTRL_V2_DELAY_REQ_MSG 0x0100 +#define IXGBE_RXMTRL_V2_PDELAY_REQ_MSG 0x0200 +#define IXGBE_RXMTRL_V2_PDELAY_RESP_MSG 0x0300 +#define IXGBE_RXMTRL_V2_FOLLOWUP_MSG 0x0800 +#define IXGBE_RXMTRL_V2_DELAY_RESP_MSG 0x0900 +#define IXGBE_RXMTRL_V2_PDELAY_FOLLOWUP_MSG 0x0A00 +#define IXGBE_RXMTRL_V2_ANNOUNCE_MSG 0x0B00 +#define IXGBE_RXMTRL_V2_SIGNALING_MSG 0x0C00 +#define IXGBE_RXMTRL_V2_MGMT_MSG 0x0D00 + #define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ #define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ #define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */ @@ -2008,6 +2038,7 @@ enum { #define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */ #define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */ #define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */ +#define IXGBE_RXDADV_STAT_TS 0x00010000 /* IEEE 1588 Time Stamp */ /* PSRTYPE bit definitions */ #define IXGBE_PSRTYPE_TCPHDR 0x00000010 @@ -2285,6 +2316,7 @@ struct ixgbe_adv_tx_context_desc { /* Adv Transmit Descriptor Config Masks */ #define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */ #define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */ +#define IXGBE_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE 1588 Time Stamp */ #define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */ #define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */ #define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */ |