diff options
| -rw-r--r-- | drivers/usb/host/ehci-pci.c | 42 | ||||
| -rw-r--r-- | drivers/usb/host/pci-quirks.c | 48 | ||||
| -rw-r--r-- | drivers/usb/host/pci-quirks.h | 3 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 14 |
4 files changed, 27 insertions, 80 deletions
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 595d210655b6..6bd299e61f58 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -315,53 +315,11 @@ done: * Also they depend on separate root hub suspend/resume. */ -static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev) -{ - return pdev->class == PCI_CLASS_SERIAL_USB_EHCI && - pdev->vendor == PCI_VENDOR_ID_INTEL && - (pdev->device == 0x1E26 || - pdev->device == 0x8C2D || - pdev->device == 0x8C26 || - pdev->device == 0x9C26); -} - -static void ehci_enable_xhci_companion(void) -{ - struct pci_dev *companion = NULL; - - /* The xHCI and EHCI controllers are not on the same PCI slot */ - for_each_pci_dev(companion) { - if (!usb_is_intel_switchable_xhci(companion)) - continue; - usb_enable_xhci_ports(companion); - return; - } -} - static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - /* The BIOS on systems with the Intel Panther Point chipset may or may - * not support xHCI natively. That means that during system resume, it - * may switch the ports back to EHCI so that users can use their - * keyboard to select a kernel from GRUB after resume from hibernate. - * - * The BIOS is supposed to remember whether the OS had xHCI ports - * enabled before resume, and switch the ports back to xHCI when the - * BIOS/OS semaphore is written, but we all know we can't trust BIOS - * writers. - * - * Unconditionally switch the ports back to xHCI after a system resume. - * We can't tell whether the EHCI or xHCI controller will be resumed - * first, so we have to do the port switchover in both drivers. Writing - * a '1' to the port switchover registers should have no effect if the - * port was already switched over. - */ - if (usb_is_intel_switchable_ehci(pdev)) - ehci_enable_xhci_companion(); - if (ehci_resume(hcd, hibernated) != 0) (void) ehci_pci_reinit(ehci, pdev); return 0; diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index b9848e4d3d44..2c76ef1320ea 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -735,32 +735,6 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, return -ETIMEDOUT; } -#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31 -#define PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI 0x9C31 - -bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev) -{ - return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && - pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI; -} - -/* The Intel Lynx Point chipset also has switchable ports. */ -bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev) -{ - return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && - pdev->vendor == PCI_VENDOR_ID_INTEL && - (pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI); -} - -bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) -{ - return usb_is_intel_ppt_switchable_xhci(pdev) || - usb_is_intel_lpt_switchable_xhci(pdev); -} -EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci); - /* * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that * share some number of ports. These ports can be switched between either @@ -779,9 +753,23 @@ EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci); * terminations before switching the USB 2.0 wires over, so that USB 3.0 * devices connect at SuperSpeed, rather than at USB 2.0 speeds. */ -void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) +void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) { u32 ports_available; + bool ehci_found = false; + struct pci_dev *companion = NULL; + + /* make sure an intel EHCI controller exists */ + for_each_pci_dev(companion) { + if (companion->class == PCI_CLASS_SERIAL_USB_EHCI && + companion->vendor == PCI_VENDOR_ID_INTEL) { + ehci_found = true; + break; + } + } + + if (!ehci_found) + return; /* Don't switchover the ports if the user hasn't compiled the xHCI * driver. Otherwise they will see "dead" USB ports that don't power @@ -840,7 +828,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over " "to xHCI: 0x%x\n", ports_available); } -EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); +EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) { @@ -921,8 +909,8 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); hc_init: - if (usb_is_intel_switchable_xhci(pdev)) - usb_enable_xhci_ports(pdev); + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + usb_enable_intel_xhci_ports(pdev); op_reg_base = base + XHCI_HC_LENGTH(readl(base)); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 4b8a2092432f..0a5e0fb8f466 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -8,8 +8,7 @@ int usb_amd_find_chipset_info(void); void usb_amd_dev_put(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); -bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); -void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); +void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); void sb800_prefetch(struct device *dev, int on); #else diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index cc24e39b97d5..475e06e10a77 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -250,13 +250,15 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) * writers. * * Unconditionally switch the ports back to xHCI after a system resume. - * We can't tell whether the EHCI or xHCI controller will be resumed - * first, so we have to do the port switchover in both drivers. Writing - * a '1' to the port switchover registers should have no effect if the - * port was already switched over. + * It should not matter whether the EHCI or xHCI controller is + * resumed first. It's enough to do the switchover in xHCI because + * USB core won't notice anything as the hub driver doesn't start + * running again until after all the devices (including both EHCI and + * xHCI host controllers) have been resumed. */ - if (usb_is_intel_switchable_xhci(pdev)) - usb_enable_xhci_ports(pdev); + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + usb_enable_intel_xhci_ports(pdev); retval = xhci_resume(xhci, hibernated); return retval; |