summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt35
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-matrix.txt24
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-smc.txt19
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt10
-rw-r--r--arch/arm/boot/dts/sh73a0-kzm9g-reference.dts4
-rw-r--r--arch/arm/boot/dts/sh73a0.dtsi358
-rw-r--r--arch/arm/mach-exynos/common.h4
-rw-r--r--arch/arm/mach-exynos/exynos.c4
-rw-r--r--arch/arm/mach-exynos/platsmp.c2
-rw-r--r--arch/arm/mach-exynos/pm.c133
-rw-r--r--arch/arm/mach-exynos/suspend.c4
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c5
-rw-r--r--drivers/clk/shmobile/Makefile1
-rw-r--r--drivers/clk/shmobile/clk-sh73a0.c218
-rw-r--r--drivers/cpuidle/Kconfig.arm1
-rw-r--r--drivers/cpuidle/cpuidle-exynos.c76
-rw-r--r--drivers/of/platform.c1
-rw-r--r--drivers/pcmcia/Kconfig1
-rw-r--r--drivers/soc/ti/Makefile3
-rw-r--r--drivers/soc/ti/knav_qmss_acc.c2
-rw-r--r--drivers/soc/ti/knav_qmss_queue.c9
-rw-r--r--drivers/usb/gadget/udc/Kconfig1
-rw-r--r--drivers/usb/gadget/udc/at91_udc.c525
-rw-r--r--drivers/usb/gadget/udc/at91_udc.h9
-rw-r--r--include/dt-bindings/clock/sh73a0-clock.h79
-rw-r--r--include/linux/mfd/syscon/atmel-matrix.h117
-rw-r--r--include/linux/mfd/syscon/atmel-smc.h173
-rw-r--r--include/linux/platform_data/cpuidle-exynos.h20
28 files changed, 1570 insertions, 268 deletions
diff --git a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
new file mode 100644
index 000000000000..a8978ec94831
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
@@ -0,0 +1,35 @@
+These bindings should be considered EXPERIMENTAL for now.
+
+* Renesas SH73A0 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+ - compatible: Must be "renesas,sh73a0-cpg-clocks"
+
+ - reg: Base address and length of the memory resource used by the CPG
+
+ - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+ - #clock-cells: Must be 1
+
+ - clock-output-names: The names of the clocks. Supported clocks are "main",
+ "pll0", "pll1", "pll2", "pll3", "dsi0phy", "dsi1phy", "zg", "m3", "b",
+ "m1", "m2", "z", "zx", and "hp".
+
+
+Example
+-------
+
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,sh73a0-cpg-clocks";
+ reg = <0 0xe6150000 0 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll2",
+ "pll3", "dsi0phy", "dsi1phy",
+ "zg", "m3", "b", "m1", "m2",
+ "z", "zx", "hp";
+ };
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
new file mode 100644
index 000000000000..e3ef50ca02a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@@ -0,0 +1,24 @@
+* Device tree bindings for Atmel Bus Matrix
+
+The Bus Matrix registers are used to configure Atmel SoCs internal bus
+behavior (master/slave priorities, undefined burst length type, ...)
+
+Required properties:
+- compatible: Should be one of the following
+ "atmel,at91sam9260-matrix", "syscon"
+ "atmel,at91sam9261-matrix", "syscon"
+ "atmel,at91sam9263-matrix", "syscon"
+ "atmel,at91sam9rl-matrix", "syscon"
+ "atmel,at91sam9g45-matrix", "syscon"
+ "atmel,at91sam9n12-matrix", "syscon"
+ "atmel,at91sam9x5-matrix", "syscon"
+ "atmel,sama5d3-matrix", "syscon"
+- reg: Contains offset/length value of the Bus Matrix
+ memory region.
+
+Example:
+
+matrix: matrix@ffffec00 {
+ compatible = "atmel,sama5d3-matrix", "syscon";
+ reg = <0xffffec00 0x200>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
new file mode 100644
index 000000000000..26eeed373934
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Atmel SMC (Static Memory Controller)
+
+The SMC registers are used to configure Atmel EBI (External Bus Interface)
+to interface with standard memory devices (NAND, NOR, SRAM or specialized
+devices like FPGAs).
+
+Required properties:
+- compatible: Should be one of the following
+ "atmel,at91sam9260-smc", "syscon"
+ "atmel,sama5d3-smc", "syscon"
+- reg: Contains offset/length value of the SMC memory
+ region.
+
+Example:
+
+smc: smc@ffffc000 {
+ compatible = "atmel,sama5d3-smc", "syscon";
+ reg = <0xffffc000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 38fee0f66c12..e180d56c75db 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -33,9 +33,17 @@ usb1: ehci@00800000 {
AT91 USB device controller
Required properties:
- - compatible: Should be "atmel,at91rm9200-udc"
+ - compatible: Should be one of the following
+ "atmel,at91rm9200-udc"
+ "atmel,at91sam9260-udc"
+ "atmel,at91sam9261-udc"
+ "atmel,at91sam9263-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
+ - clocks: Should reference the peripheral and the AHB clocks
+ - clock-names: Should contains two strings
+ "pclk" for the peripheral clock
+ "hclk" for the AHB clock
Optional properties:
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 863dc4c7d7f6..6d32c87632d4 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -182,6 +182,10 @@
status = "okay";
};
+&extal2_clk {
+ clock-frequency = <48000000>;
+};
+
&i2c0 {
status = "okay";
as3711@40 {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 37c8a761aeab..2dfd5b44255d 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -10,6 +10,7 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/sh73a0-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -71,6 +72,8 @@
renesas,channels-mask = <0x3f>;
+ clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
+ clock-names = "fck";
status = "disabled";
};
@@ -160,6 +163,7 @@
0 168 IRQ_TYPE_LEVEL_HIGH
0 169 IRQ_TYPE_LEVEL_HIGH
0 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
status = "disabled";
};
@@ -172,6 +176,7 @@
0 52 IRQ_TYPE_LEVEL_HIGH
0 53 IRQ_TYPE_LEVEL_HIGH
0 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
status = "disabled";
};
@@ -184,6 +189,7 @@
0 172 IRQ_TYPE_LEVEL_HIGH
0 173 IRQ_TYPE_LEVEL_HIGH
0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
status = "disabled";
};
@@ -196,6 +202,7 @@
0 184 IRQ_TYPE_LEVEL_HIGH
0 185 IRQ_TYPE_LEVEL_HIGH
0 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
status = "disabled";
};
@@ -208,6 +215,7 @@
0 188 IRQ_TYPE_LEVEL_HIGH
0 189 IRQ_TYPE_LEVEL_HIGH
0 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
status = "disabled";
};
@@ -216,6 +224,7 @@
reg = <0xe6bd0000 0x100>;
interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
0 141 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
reg-io-width = <4>;
status = "disabled";
};
@@ -226,6 +235,7 @@
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
0 84 IRQ_TYPE_LEVEL_HIGH
0 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
cap-sd-highspeed;
status = "disabled";
};
@@ -236,6 +246,7 @@
reg = <0xee120000 0x100>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
0 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
@@ -246,6 +257,7 @@
reg = <0xee140000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
@@ -255,6 +267,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c40000 0x100>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -262,6 +276,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c50000 0x100>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -269,6 +285,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c60000 0x100>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -276,6 +294,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c70000 0x100>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -283,6 +303,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c80000 0x100>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -290,6 +312,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -297,6 +321,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -304,6 +330,8 @@
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -311,6 +339,8 @@
compatible = "renesas,scifb-sh73a0", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -338,4 +368,332 @@
interrupts = <0 146 0x4>;
status = "disabled";
};
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* External root clocks */
+ extalr_clk: extalr_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "extalr";
+ };
+ extal1_clk: extal1_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "extal1";
+ };
+ extal2_clk: extal2_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "extal2";
+ };
+ extcki_clk: extcki_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "extcki";
+ };
+ fsiack_clk: fsiack_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "fsiack";
+ };
+ fsibck_clk: fsibck_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "fsibck";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,sh73a0-cpg-clocks";
+ reg = <0xe6150000 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll2",
+ "pll3", "dsi0phy", "dsi1phy",
+ "zg", "m3", "b", "m1", "m2",
+ "z", "zx", "hp";
+ };
+
+ /* Variable factor clocks (DIV6) */
+ vclk1_clk: vclk1_clk@e6150008 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150008 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk1";
+ };
+ vclk2_clk: vclk2_clk@e615000c {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe615000c 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk2";
+ };
+ vclk3_clk: vclk3_clk@e615001c {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe615001c 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk3";
+ };
+ zb_clk: zb_clk@e6150010 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150010 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "zb";
+ };
+ flctl_clk: flctl_clk@e6150014 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150014 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "flctlck";
+ };
+ sdhi0_clk: sdhi0_clk@e6150074 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150074 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi0ck";
+ };
+ sdhi1_clk: sdhi1_clk@e6150078 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150078 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi1ck";
+ };
+ sdhi2_clk: sdhi2_clk@e615007c {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe615007c 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi2ck";
+ };
+ fsia_clk: fsia_clk@e6150018 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150018 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "fsia";
+ };
+ fsib_clk: fsib_clk@e6150090 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150090 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "fsib";
+ };
+ sub_clk: sub_clk@e6150080 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150080 4>;
+ clocks = <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sub";
+ };
+ spua_clk: spua_clk@e6150084 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150084 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "spua";
+ };
+ spuv_clk: spuv_clk@e6150094 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150094 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "spuv";
+ };
+ msu_clk: msu_clk@e6150088 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150088 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "msu";
+ };
+ hsi_clk: hsi_clk@e615008c {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe615008c 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "hsi";
+ };
+ mfg1_clk: mfg1_clk@e6150098 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150098 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mfg1";
+ };
+ mfg2_clk: mfg2_clk@e615009c {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe615009c 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mfg2";
+ };
+ dsit_clk: dsit_clk@e6150060 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150060 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "dsit";
+ };
+ dsi0p_clk: dsi0p_clk@e6150064 {
+ compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150064 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "dsi0pck";
+ };
+
+ /* Fixed factor clocks */
+ main_div2_clk: main_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks SH73A0_CLK_MAIN>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "main_div2";
+ };
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ pll1_div7_clk: pll1_div7_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <7>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div7";
+ };
+ pll1_div13_clk: pll1_div13_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <13>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div13";
+ };
+ twd_clk: twd_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks SH73A0_CLK_Z>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "twd";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: mstp0_clks@e6150130 {
+ compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150130 4>, <0xe6150030 4>;
+ clocks = <&cpg_clocks SH73A0_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ SH73A0_CLK_IIC2
+ >;
+ clock-output-names =
+ "iic2";
+ };
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150134 4>, <0xe6150038 4>;
+ clocks = <&cpg_clocks SH73A0_CLK_B>,
+ <&cpg_clocks SH73A0_CLK_B>,
+ <&cpg_clocks SH73A0_CLK_B>,
+ <&cpg_clocks SH73A0_CLK_B>,
+ <&sub_clk>, <&cpg_clocks SH73A0_CLK_B>,
+ <&cpg_clocks SH73A0_CLK_HP>,
+ <&cpg_clocks SH73A0_CLK_ZG>,
+ <&cpg_clocks SH73A0_CLK_B>;
+ #clock-cells = <1>;
+ clock-indices = <
+ SH73A0_CLK_CEU1 SH73A0_CLK_CSI2_RX1
+ SH73A0_CLK_CEU0 SH73A0_CLK_CSI2_RX0
+ SH73A0_CLK_TMU0 SH73A0_CLK_DSITX0
+ SH73A0_CLK_IIC0 SH73A0_CLK_SGX
+ SH73A0_CLK_LCDC0
+ >;
+ clock-output-names =
+ "ceu1", "csi2_rx1", "ceu0", "csi2_rx0",
+ "tmu0", "dsitx0", "iic0", "sgx", "lcdc0";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150138 4>, <0xe6150040 4>;
+ clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>,
+ <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC
+ SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5
+ SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0
+ SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2
+ SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4
+ >;
+ clock-output-names =
+ "scifa7", "sy_dmac", "mp_dmac", "scifa5",
+ "scifb", "scifa0", "scifa1", "scifa2",
+ "scifa3", "scifa4";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe615013c 4>, <0xe6150048 4>;
+ clocks = <&sub_clk>, <&extalr_clk>,
+ <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
+ <&cpg_clocks SH73A0_CLK_HP>,
+ <&cpg_clocks SH73A0_CLK_HP>, <&flctl_clk>,
+ <&sdhi0_clk>, <&sdhi1_clk>,
+ <&cpg_clocks SH73A0_CLK_HP>, <&sdhi2_clk>,
+ <&main_div2_clk>, <&main_div2_clk>,
+ <&main_div2_clk>, <&main_div2_clk>,
+ <&main_div2_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ SH73A0_CLK_SCIFA6 SH73A0_CLK_CMT1
+ SH73A0_CLK_FSI SH73A0_CLK_IRDA
+ SH73A0_CLK_IIC1 SH73A0_CLK_USB SH73A0_CLK_FLCTL
+ SH73A0_CLK_SDHI0 SH73A0_CLK_SDHI1
+ SH73A0_CLK_MMCIF0 SH73A0_CLK_SDHI2
+ SH73A0_CLK_TPU0 SH73A0_CLK_TPU1
+ SH73A0_CLK_TPU2 SH73A0_CLK_TPU3
+ SH73A0_CLK_TPU4
+ >;
+ clock-output-names =
+ "scifa6", "cmt1", "fsi", "irda", "iic1",
+ "usb", "flctl", "sdhi0", "sdhi1", "mmcif0", "sdhi2",
+ "tpu0", "tpu1", "tpu2", "tpu3", "tpu4";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150140 4>, <0xe615004c 4>;
+ clocks = <&cpg_clocks SH73A0_CLK_HP>,
+ <&cpg_clocks SH73A0_CLK_HP>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ SH73A0_CLK_IIC3 SH73A0_CLK_IIC4
+ SH73A0_CLK_KEYSC
+ >;
+ clock-output-names =
+ "iic3", "iic4", "keysc";
+ };
+ };
};
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 865f878063cc..f70eca7ee705 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -13,6 +13,7 @@
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
#include <linux/of.h>
+#include <linux/platform_data/cpuidle-exynos.h>
#define EXYNOS3250_SOC_ID 0xE3472000
#define EXYNOS3_SOC_MASK 0xFFFFF000
@@ -150,8 +151,11 @@ extern void exynos_pm_central_suspend(void);
extern int exynos_pm_central_resume(void);
extern void exynos_enter_aftr(void);
+extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
+
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
+extern void __iomem *cpu_boot_reg_base(void);
static inline void pmu_raw_writel(u32 val, u32 offset)
{
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 78eca99b98d1..2013f73797ed 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -211,6 +211,10 @@ static void __init exynos_dt_machine_init(void)
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
+#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
+ if (of_machine_is_compatible("samsung,exynos4210"))
+ exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
+#endif
if (of_machine_is_compatible("samsung,exynos4210") ||
of_machine_is_compatible("samsung,exynos4212") ||
(of_machine_is_compatible("samsung,exynos4412") &&
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 7a1ebfeeeeb8..3f32c47a6d74 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -194,7 +194,7 @@ int exynos_cluster_power_state(int cluster)
S5P_CORE_LOCAL_PWR_EN);
}
-static inline void __iomem *cpu_boot_reg_base(void)
+void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM5;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index dfc8594e5b1f..e6209dadc00d 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -98,10 +98,6 @@ void exynos_pm_central_suspend(void)
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
- /* Setting SEQ_OPTION register */
- pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
- S5P_CENTRAL_SEQ_OPTION);
}
int exynos_pm_central_resume(void)
@@ -165,6 +161,13 @@ void exynos_enter_aftr(void)
exynos_pm_central_suspend();
+ if (of_machine_is_compatible("samsung,exynos4212") ||
+ of_machine_is_compatible("samsung,exynos4412")) {
+ /* Setting SEQ_OPTION register */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+ S5P_CENTRAL_SEQ_OPTION);
+ }
+
cpu_suspend(0, exynos_aftr_finisher);
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
@@ -177,3 +180,125 @@ void exynos_enter_aftr(void)
cpu_pm_exit();
}
+
+static atomic_t cpu1_wakeup = ATOMIC_INIT(0);
+
+static int exynos_cpu0_enter_aftr(void)
+{
+ int ret = -1;
+
+ /*
+ * If the other cpu is powered on, we have to power it off, because
+ * the AFTR state won't work otherwise
+ */
+ if (cpu_online(1)) {
+ /*
+ * We reach a sync point with the coupled idle state, we know
+ * the other cpu will power down itself or will abort the
+ * sequence, let's wait for one of these to happen
+ */
+ while (exynos_cpu_power_state(1)) {
+ /*
+ * The other cpu may skip idle and boot back
+ * up again
+ */
+ if (atomic_read(&cpu1_wakeup))
+ goto abort;
+
+ /*
+ * The other cpu may bounce through idle and
+ * boot back up again, getting stuck in the
+ * boot rom code
+ */
+ if (__raw_readl(cpu_boot_reg_base()) == 0)
+ goto abort;
+
+ cpu_relax();
+ }
+ }
+
+ exynos_enter_aftr();
+ ret = 0;
+
+abort:
+ if (cpu_online(1)) {
+ /*
+ * Set the boot vector to something non-zero
+ */
+ __raw_writel(virt_to_phys(exynos_cpu_resume),
+ cpu_boot_reg_base());
+ dsb();
+
+ /*
+ * Turn on cpu1 and wait for it to be on
+ */
+ exynos_cpu_power_up(1);
+ while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN)
+ cpu_relax();
+
+ while (!atomic_read(&cpu1_wakeup)) {
+ /*
+ * Poke cpu1 out of the boot rom
+ */
+ __raw_writel(virt_to_phys(exynos_cpu_resume),
+ cpu_boot_reg_base());
+
+ arch_send_wakeup_ipi_mask(cpumask_of(1));
+ }
+ }
+
+ return ret;
+}
+
+static int exynos_wfi_finisher(unsigned long flags)
+{
+ cpu_do_idle();
+
+ return -1;
+}
+
+static int exynos_cpu1_powerdown(void)
+{
+ int ret = -1;
+
+ /*
+ * Idle sequence for cpu1
+ */
+ if (cpu_pm_enter())
+ goto cpu1_aborted;
+
+ /*
+ * Turn off cpu 1
+ */
+ exynos_cpu_power_down(1);
+
+ ret = cpu_suspend(0, exynos_wfi_finisher);
+
+ cpu_pm_exit();
+
+cpu1_aborted:
+ dsb();
+ /*
+ * Notify cpu 0 that cpu 1 is awake
+ */
+ atomic_set(&cpu1_wakeup, 1);
+
+ return ret;
+}
+
+static void exynos_pre_enter_aftr(void)
+{
+ __raw_writel(virt_to_phys(exynos_cpu_resume), cpu_boot_reg_base());
+}
+
+static void exynos_post_enter_aftr(void)
+{
+ atomic_set(&cpu1_wakeup, 0);
+}
+
+struct cpuidle_exynos_data cpuidle_coupled_exynos_data = {
+ .cpu0_enter_aftr = exynos_cpu0_enter_aftr,
+ .cpu1_powerdown = exynos_cpu1_powerdown,
+ .pre_enter_aftr = exynos_pre_enter_aftr,
+ .post_enter_aftr = exynos_post_enter_aftr,
+};
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 82e6b6fba23f..666ec3e5b03f 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -319,6 +319,10 @@ static int exynos_pm_suspend(void)
{
exynos_pm_central_suspend();
+ /* Setting SEQ_OPTION register */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+ S5P_CENTRAL_SEQ_OPTION);
+
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index a8593d1241be..faea74a2151b 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -766,7 +766,9 @@ void __init __weak sh73a0_register_twd(void) { }
void __init sh73a0_earlytimer_init(void)
{
shmobile_init_delay();
+#ifndef CONFIG_COMMON_CLK
sh73a0_clock_init();
+#endif
shmobile_earlytimer_init();
sh73a0_register_twd();
}
@@ -785,8 +787,9 @@ void __init sh73a0_add_early_devices(void)
void __init sh73a0_add_standard_devices_dt(void)
{
/* clocks are setup late during boot in the case of DT */
+#ifndef CONFIG_COMMON_CLK
sh73a0_clock_init();
-
+#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 960bf22d42ae..f83980f2b956 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -5,5 +5,6 @@ obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_SH73A0) += clk-sh73a0.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
diff --git a/drivers/clk/shmobile/clk-sh73a0.c b/drivers/clk/shmobile/clk-sh73a0.c
new file mode 100644
index 000000000000..cd529cfe412f
--- /dev/null
+++ b/drivers/clk/shmobile/clk-sh73a0.c
@@ -0,0 +1,218 @@
+/*
+ * sh73a0 Core CPG Clocks
+ *
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+struct sh73a0_cpg {
+ struct clk_onecell_data data;
+ spinlock_t lock;
+ void __iomem *reg;
+};
+
+#define CPG_FRQCRA 0x00
+#define CPG_FRQCRB 0x04
+#define CPG_SD0CKCR 0x74
+#define CPG_SD1CKCR 0x78
+#define CPG_SD2CKCR 0x7c
+#define CPG_PLLECR 0xd0
+#define CPG_PLL0CR 0xd8
+#define CPG_PLL1CR 0x28
+#define CPG_PLL2CR 0x2c
+#define CPG_PLL3CR 0xdc
+#define CPG_CKSCR 0xc0
+#define CPG_DSI0PHYCR 0x6c
+#define CPG_DSI1PHYCR 0x70
+
+#define CLK_ENABLE_ON_INIT BIT(0)
+
+struct div4_clk {
+ const char *name;
+ const char *parent;
+ unsigned int reg;
+ unsigned int shift;
+};
+
+static struct div4_clk div4_clks[] = {
+ { "zg", "pll0", CPG_FRQCRA, 16 },
+ { "m3", "pll1", CPG_FRQCRA, 12 },
+ { "b", "pll1", CPG_FRQCRA, 8 },
+ { "m1", "pll1", CPG_FRQCRA, 4 },
+ { "m2", "pll1", CPG_FRQCRA, 0 },
+ { "zx", "pll1", CPG_FRQCRB, 12 },
+ { "hp", "pll1", CPG_FRQCRB, 4 },
+ { NULL, NULL, 0, 0 },
+};
+
+static const struct clk_div_table div4_div_table[] = {
+ { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 },
+ { 6, 16 }, { 7, 18 }, { 8, 24 }, { 10, 36 }, { 11, 48 },
+ { 12, 7 }, { 0, 0 }
+};
+
+static const struct clk_div_table z_div_table[] = {
+ /* ZSEL == 0 */
+ { 0, 1 }, { 1, 1 }, { 2, 1 }, { 3, 1 }, { 4, 1 }, { 5, 1 },
+ { 6, 1 }, { 7, 1 }, { 8, 1 }, { 9, 1 }, { 10, 1 }, { 11, 1 },
+ { 12, 1 }, { 13, 1 }, { 14, 1 }, { 15, 1 },
+ /* ZSEL == 1 */
+ { 16, 2 }, { 17, 3 }, { 18, 4 }, { 19, 6 }, { 20, 8 }, { 21, 12 },
+ { 22, 16 }, { 24, 24 }, { 27, 48 }, { 0, 0 }
+};
+
+static struct clk * __init
+sh73a0_cpg_register_clock(struct device_node *np, struct sh73a0_cpg *cpg,
+ const char *name)
+{
+ const struct clk_div_table *table = NULL;
+ unsigned int shift, reg, width;
+ const char *parent_name;
+ unsigned int mult = 1;
+ unsigned int div = 1;
+
+ if (!strcmp(name, "main")) {
+ /* extal1, extal1_div2, extal2, extal2_div2 */
+ u32 parent_idx = (clk_readl(cpg->reg + CPG_CKSCR) >> 28) & 3;
+
+ parent_name = of_clk_get_parent_name(np, parent_idx >> 1);
+ div = (parent_idx & 1) + 1;
+ } else if (!strncmp(name, "pll", 3)) {
+ void __iomem *enable_reg = cpg->reg;
+ u32 enable_bit = name[3] - '0';
+
+ parent_name = "main";
+ switch (enable_bit) {
+ case 0:
+ enable_reg += CPG_PLL0CR;
+ break;
+ case 1:
+ enable_reg += CPG_PLL1CR;
+ break;
+ case 2:
+ enable_reg += CPG_PLL2CR;
+ break;
+ case 3:
+ enable_reg += CPG_PLL3CR;
+ break;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+ if (clk_readl(cpg->reg + CPG_PLLECR) & BIT(enable_bit)) {
+ mult = ((clk_readl(enable_reg) >> 24) & 0x3f) + 1;
+ /* handle CFG bit for PLL1 and PLL2 */
+ if (enable_bit == 1 || enable_bit == 2)
+ if (clk_readl(enable_reg) & BIT(20))
+ mult *= 2;
+ }
+ } else if (!strcmp(name, "dsi0phy") || !strcmp(name, "dsi1phy")) {
+ u32 phy_no = name[3] - '0';
+ void __iomem *dsi_reg = cpg->reg +
+ (phy_no ? CPG_DSI1PHYCR : CPG_DSI0PHYCR);
+
+ parent_name = phy_no ? "dsi1pck" : "dsi0pck";
+ mult = __raw_readl(dsi_reg);
+ if (!(mult & 0x8000))
+ mult = 1;
+ else
+ mult = (mult & 0x3f) + 1;
+ } else if (!strcmp(name, "z")) {
+ parent_name = "pll0";
+ table = z_div_table;
+ reg = CPG_FRQCRB;
+ shift = 24;
+ width = 5;
+ } else {
+ struct div4_clk *c;
+
+ for (c = div4_clks; c->name; c++) {
+ if (!strcmp(name, c->name)) {
+ parent_name = c->parent;
+ table = div4_div_table;
+ reg = c->reg;
+ shift = c->shift;
+ width = 4;
+ break;
+ }
+ }
+ if (!c->name)
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (!table) {
+ return clk_register_fixed_factor(NULL, name, parent_name, 0,
+ mult, div);
+ } else {
+ return clk_register_divider_table(NULL, name, parent_name, 0,
+ cpg->reg + reg, shift, width, 0,
+ table, &cpg->lock);
+ }
+}
+
+static void __init sh73a0_cpg_clocks_init(struct device_node *np)
+{
+ struct sh73a0_cpg *cpg;
+ struct clk **clks;
+ unsigned int i;
+ int num_clks;
+
+ num_clks = of_property_count_strings(np, "clock-output-names");
+ if (num_clks < 0) {
+ pr_err("%s: failed to count clocks\n", __func__);
+ return;
+ }
+
+ cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+ clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
+ if (cpg == NULL || clks == NULL) {
+ /* We're leaking memory on purpose, there's no point in cleaning
+ * up as the system won't boot anyway.
+ */
+ return;
+ }
+
+ spin_lock_init(&cpg->lock);
+
+ cpg->data.clks = clks;
+ cpg->data.clk_num = num_clks;
+
+ cpg->reg = of_iomap(np, 0);
+ if (WARN_ON(cpg->reg == NULL))
+ return;
+
+ /* Set SDHI clocks to a known state */
+ clk_writel(0x108, cpg->reg + CPG_SD0CKCR);
+ clk_writel(0x108, cpg->reg + CPG_SD1CKCR);
+ clk_writel(0x108, cpg->reg + CPG_SD2CKCR);
+
+ for (i = 0; i < num_clks; ++i) {
+ const char *name;
+ struct clk *clk;
+
+ of_property_read_string_index(np, "clock-output-names", i,
+ &name);
+
+ clk = sh73a0_cpg_register_clock(np, cpg, name);
+ if (IS_ERR(clk))
+ pr_err("%s: failed to register %s %s clock (%ld)\n",
+ __func__, np->name, name, PTR_ERR(clk));
+ else
+ cpg->data.clks[i] = clk;
+ }
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+CLK_OF_DECLARE(sh73a0_cpg_clks, "renesas,sh73a0-cpg-clocks",
+ sh73a0_cpg_clocks_init);
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 8c16ab20fb15..8e07c9419153 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -55,6 +55,7 @@ config ARM_AT91_CPUIDLE
config ARM_EXYNOS_CPUIDLE
bool "Cpu Idle Driver for the Exynos processors"
depends on ARCH_EXYNOS
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
help
Select this to enable cpuidle for Exynos processors
diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c
index 4003a3160865..26f5f29fdb03 100644
--- a/drivers/cpuidle/cpuidle-exynos.c
+++ b/drivers/cpuidle/cpuidle-exynos.c
@@ -1,8 +1,11 @@
-/* linux/arch/arm/mach-exynos/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
+ * Coupled cpuidle support based on the work of:
+ * Colin Cross <ccross@android.com>
+ * Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -13,13 +16,49 @@
#include <linux/export.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/platform_data/cpuidle-exynos.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/cpuidle.h>
+static atomic_t exynos_idle_barrier;
+
+static struct cpuidle_exynos_data *exynos_cpuidle_pdata;
static void (*exynos_enter_aftr)(void);
+static int exynos_enter_coupled_lowpower(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ int ret;
+
+ exynos_cpuidle_pdata->pre_enter_aftr();
+
+ /*
+ * Waiting all cpus to reach this point at the same moment
+ */
+ cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
+
+ /*
+ * Both cpus will reach this point at the same time
+ */
+ ret = dev->cpu ? exynos_cpuidle_pdata->cpu1_powerdown()
+ : exynos_cpuidle_pdata->cpu0_enter_aftr();
+ if (ret)
+ index = ret;
+
+ /*
+ * Waiting all cpus to finish the power sequence before going further
+ */
+ cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
+
+ exynos_cpuidle_pdata->post_enter_aftr();
+
+ return index;
+}
+
static int exynos_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
@@ -55,13 +94,40 @@ static struct cpuidle_driver exynos_idle_driver = {
.safe_state_index = 0,
};
+static struct cpuidle_driver exynos_coupled_idle_driver = {
+ .name = "exynos_coupled_idle",
+ .owner = THIS_MODULE,
+ .states = {
+ [0] = ARM_CPUIDLE_WFI_STATE,
+ [1] = {
+ .enter = exynos_enter_coupled_lowpower,
+ .exit_latency = 5000,
+ .target_residency = 10000,
+ .flags = CPUIDLE_FLAG_COUPLED |
+ CPUIDLE_FLAG_TIMER_STOP,
+ .name = "C1",
+ .desc = "ARM power down",
+ },
+ },
+ .state_count = 2,
+ .safe_state_index = 0,
+};
+
static int exynos_cpuidle_probe(struct platform_device *pdev)
{
int ret;
- exynos_enter_aftr = (void *)(pdev->dev.platform_data);
+ if (of_machine_is_compatible("samsung,exynos4210")) {
+ exynos_cpuidle_pdata = pdev->dev.platform_data;
+
+ ret = cpuidle_register(&exynos_coupled_idle_driver,
+ cpu_possible_mask);
+ } else {
+ exynos_enter_aftr = (void *)(pdev->dev.platform_data);
+
+ ret = cpuidle_register(&exynos_idle_driver, NULL);
+ }
- ret = cpuidle_register(&exynos_idle_driver, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to register cpuidle driver\n");
return ret;
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index b0d50d70a8a1..b189733a1539 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -526,6 +526,7 @@ static int of_platform_device_destroy(struct device *dev, void *data)
amba_device_unregister(to_amba_device(dev));
#endif
+ of_dma_deconfigure(dev);
of_node_clear_flag(dev->of_node, OF_POPULATED);
of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
return 0;
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 8843a678f200..3bb49252a098 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -279,6 +279,7 @@ config BFIN_CFPCMCIA
config AT91_CF
tristate "AT91 CompactFlash Controller"
depends on PCMCIA && ARCH_AT91
+ depends on !ARCH_MULTIPLATFORM
help
Say Y here to support the CompactFlash controller on AT91 chips.
Or choose M to compile the driver as a module named "at91_cf".
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 6bed611e1934..135bdad7a6de 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -1,5 +1,6 @@
#
# TI Keystone SOC drivers
#
-obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS) += knav_qmss_queue.o knav_qmss_acc.o
+obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS) += knav_qmss.o
+knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o
diff --git a/drivers/soc/ti/knav_qmss_acc.c b/drivers/soc/ti/knav_qmss_acc.c
index 6fbfde6e748f..ef6f69db0bd0 100644
--- a/drivers/soc/ti/knav_qmss_acc.c
+++ b/drivers/soc/ti/knav_qmss_acc.c
@@ -209,7 +209,7 @@ static irqreturn_t knav_acc_int_handler(int irq, void *_instdata)
return IRQ_HANDLED;
}
-int knav_range_setup_acc_irq(struct knav_range_info *range,
+static int knav_range_setup_acc_irq(struct knav_range_info *range,
int queue, bool enabled)
{
struct knav_device *kdev = range->kdev;
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index 8e6a95d91d33..6d8646db52cc 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -626,6 +626,7 @@ int knav_queue_push(void *qhandle, dma_addr_t dma,
atomic_inc(&qh->stats.pushes);
return 0;
}
+EXPORT_SYMBOL_GPL(knav_queue_push);
/**
* knav_queue_pop() - pop data (or descriptor) from the head of a queue
@@ -663,6 +664,7 @@ dma_addr_t knav_queue_pop(void *qhandle, unsigned *size)
atomic_inc(&qh->stats.pops);
return dma;
}
+EXPORT_SYMBOL_GPL(knav_queue_pop);
/* carve out descriptors and push into queue */
static void kdesc_fill_pool(struct knav_pool *pool)
@@ -717,12 +719,14 @@ dma_addr_t knav_pool_desc_virt_to_dma(void *ph, void *virt)
struct knav_pool *pool = ph;
return pool->region->dma_start + (virt - pool->region->virt_start);
}
+EXPORT_SYMBOL_GPL(knav_pool_desc_virt_to_dma);
void *knav_pool_desc_dma_to_virt(void *ph, dma_addr_t dma)
{
struct knav_pool *pool = ph;
return pool->region->virt_start + (dma - pool->region->dma_start);
}
+EXPORT_SYMBOL_GPL(knav_pool_desc_dma_to_virt);
/**
* knav_pool_create() - Create a pool of descriptors
@@ -878,6 +882,7 @@ void *knav_pool_desc_get(void *ph)
data = knav_pool_desc_dma_to_virt(pool, dma);
return data;
}
+EXPORT_SYMBOL_GPL(knav_pool_desc_get);
/**
* knav_pool_desc_put() - return a descriptor to the pool
@@ -890,6 +895,7 @@ void knav_pool_desc_put(void *ph, void *desc)
dma = knav_pool_desc_virt_to_dma(pool, desc);
knav_queue_push(pool->queue, dma, pool->region->desc_size, 0);
}
+EXPORT_SYMBOL_GPL(knav_pool_desc_put);
/**
* knav_pool_desc_map() - Map descriptor for DMA transfer
@@ -916,6 +922,7 @@ int knav_pool_desc_map(void *ph, void *desc, unsigned size,
return 0;
}
+EXPORT_SYMBOL_GPL(knav_pool_desc_map);
/**
* knav_pool_desc_unmap() - Unmap descriptor after DMA transfer
@@ -938,6 +945,7 @@ void *knav_pool_desc_unmap(void *ph, dma_addr_t dma, unsigned dma_sz)
prefetch(desc);
return desc;
}
+EXPORT_SYMBOL_GPL(knav_pool_desc_unmap);
/**
* knav_pool_count() - Get the number of descriptors in pool.
@@ -949,6 +957,7 @@ int knav_pool_count(void *ph)
struct knav_pool *pool = ph;
return knav_queue_get_count(pool->queue);
}
+EXPORT_SYMBOL_GPL(knav_pool_count);
static void knav_queue_setup_region(struct knav_device *kdev,
struct knav_region *region)
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index b8e213eb36cc..366e551aeff0 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -32,6 +32,7 @@ menu "USB Peripheral Controller"
config USB_AT91
tristate "Atmel AT91 USB Device Port"
depends on ARCH_AT91
+ depends on OF || COMPILE_TEST
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index c0ec5f71f16f..2fbedca3c2b4 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -31,16 +31,9 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/atmel.h>
-
-#include <asm/byteorder.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/gpio.h>
-
-#include <mach/cpu.h>
-#include <mach/at91sam9261_matrix.h>
-#include <mach/at91_matrix.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-matrix.h>
#include "at91_udc.h"
@@ -66,7 +59,15 @@
#define DRIVER_VERSION "3 May 2006"
static const char driver_name [] = "at91_udc";
-static const char ep0name[] = "ep0";
+static const char * const ep_names[] = {
+ "ep0",
+ "ep1",
+ "ep2",
+ "ep3-int",
+ "ep4",
+ "ep5",
+};
+#define ep0name ep_names[0]
#define VBUS_POLL_TIMEOUT msecs_to_jiffies(1000)
@@ -895,8 +896,6 @@ static void clk_on(struct at91_udc *udc)
return;
udc->clocked = 1;
- if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_enable(udc->uclk);
clk_enable(udc->iclk);
clk_enable(udc->fclk);
}
@@ -909,8 +908,6 @@ static void clk_off(struct at91_udc *udc)
udc->gadget.speed = USB_SPEED_UNKNOWN;
clk_disable(udc->fclk);
clk_disable(udc->iclk);
- if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_disable(udc->uclk);
}
/*
@@ -919,8 +916,6 @@ static void clk_off(struct at91_udc *udc)
*/
static void pullup(struct at91_udc *udc, int is_on)
{
- int active = !udc->board.pullup_active_low;
-
if (!udc->enabled || !udc->vbus)
is_on = 0;
DBG("%sactive\n", is_on ? "" : "in");
@@ -929,40 +924,15 @@ static void pullup(struct at91_udc *udc, int is_on)
clk_on(udc);
at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
at91_udp_write(udc, AT91_UDP_TXVC, 0);
- if (cpu_is_at91rm9200())
- gpio_set_value(udc->board.pullup_pin, active);
- else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
- u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
-
- txvc |= AT91_UDP_TXVC_PUON;
- at91_udp_write(udc, AT91_UDP_TXVC, txvc);
- } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
- u32 usbpucr;
-
- usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
- usbpucr |= AT91_MATRIX_USBPUCR_PUON;
- at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
- }
} else {
stop_activity(udc);
at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
- if (cpu_is_at91rm9200())
- gpio_set_value(udc->board.pullup_pin, !active);
- else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
- u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
-
- txvc &= ~AT91_UDP_TXVC_PUON;
- at91_udp_write(udc, AT91_UDP_TXVC, txvc);
- } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
- u32 usbpucr;
-
- usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
- usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
- at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
- }
clk_off(udc);
}
+
+ if (udc->caps && udc->caps->pullup)
+ udc->caps->pullup(udc, is_on);
}
/* vbus is here! turn everything on that's ready */
@@ -1535,74 +1505,6 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
/*-------------------------------------------------------------------------*/
-static struct at91_udc controller = {
- .gadget = {
- .ops = &at91_udc_ops,
- .ep0 = &controller.ep[0].ep,
- .name = driver_name,
- },
- .ep[0] = {
- .ep = {
- .name = ep0name,
- .ops = &at91_ep_ops,
- },
- .udc = &controller,
- .maxpacket = 8,
- .int_mask = 1 << 0,
- },
- .ep[1] = {
- .ep = {
- .name = "ep1",
- .ops = &at91_ep_ops,
- },
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 64,
- .int_mask = 1 << 1,
- },
- .ep[2] = {
- .ep = {
- .name = "ep2",
- .ops = &at91_ep_ops,
- },
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 64,
- .int_mask = 1 << 2,
- },
- .ep[3] = {
- .ep = {
- /* could actually do bulk too */
- .name = "ep3-int",
- .ops = &at91_ep_ops,
- },
- .udc = &controller,
- .maxpacket = 8,
- .int_mask = 1 << 3,
- },
- .ep[4] = {
- .ep = {
- .name = "ep4",
- .ops = &at91_ep_ops,
- },
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 256,
- .int_mask = 1 << 4,
- },
- .ep[5] = {
- .ep = {
- .name = "ep5",
- .ops = &at91_ep_ops,
- },
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 256,
- .int_mask = 1 << 5,
- },
- /* ep6 and ep7 are also reserved (custom silicon might use them) */
-};
-
static void at91_vbus_update(struct at91_udc *udc, unsigned value)
{
value ^= udc->board.vbus_active_low;
@@ -1687,12 +1589,202 @@ static void at91udc_shutdown(struct platform_device *dev)
spin_unlock_irqrestore(&udc->lock, flags);
}
-static void at91udc_of_init(struct at91_udc *udc,
- struct device_node *np)
+static int at91rm9200_udc_init(struct at91_udc *udc)
+{
+ struct at91_ep *ep;
+ int ret;
+ int i;
+
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ ep = &udc->ep[i];
+
+ switch (i) {
+ case 0:
+ case 3:
+ ep->maxpacket = 8;
+ break;
+ case 1 ... 2:
+ ep->maxpacket = 64;
+ break;
+ case 4 ... 5:
+ ep->maxpacket = 256;
+ break;
+ }
+ }
+
+ if (!gpio_is_valid(udc->board.pullup_pin)) {
+ DBG("no D+ pullup?\n");
+ return -ENODEV;
+ }
+
+ ret = devm_gpio_request(&udc->pdev->dev, udc->board.pullup_pin,
+ "udc_pullup");
+ if (ret) {
+ DBG("D+ pullup is busy\n");
+ return ret;
+ }
+
+ gpio_direction_output(udc->board.pullup_pin,
+ udc->board.pullup_active_low);
+
+ return 0;
+}
+
+static void at91rm9200_udc_pullup(struct at91_udc *udc, int is_on)
+{
+ int active = !udc->board.pullup_active_low;
+
+ if (is_on)
+ gpio_set_value(udc->board.pullup_pin, active);
+ else
+ gpio_set_value(udc->board.pullup_pin, !active);
+}
+
+static const struct at91_udc_caps at91rm9200_udc_caps = {
+ .init = at91rm9200_udc_init,
+ .pullup = at91rm9200_udc_pullup,
+};
+
+static int at91sam9260_udc_init(struct at91_udc *udc)
+{
+ struct at91_ep *ep;
+ int i;
+
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ ep = &udc->ep[i];
+
+ switch (i) {
+ case 0 ... 3:
+ ep->maxpacket = 64;
+ break;
+ case 4 ... 5:
+ ep->maxpacket = 512;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static void at91sam9260_udc_pullup(struct at91_udc *udc, int is_on)
+{
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+ if (is_on)
+ txvc |= AT91_UDP_TXVC_PUON;
+ else
+ txvc &= ~AT91_UDP_TXVC_PUON;
+
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+}
+
+static const struct at91_udc_caps at91sam9260_udc_caps = {
+ .init = at91sam9260_udc_init,
+ .pullup = at91sam9260_udc_pullup,
+};
+
+static int at91sam9261_udc_init(struct at91_udc *udc)
+{
+ struct at91_ep *ep;
+ int i;
+
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ ep = &udc->ep[i];
+
+ switch (i) {
+ case 0:
+ ep->maxpacket = 8;
+ break;
+ case 1 ... 3:
+ ep->maxpacket = 64;
+ break;
+ case 4 ... 5:
+ ep->maxpacket = 256;
+ break;
+ }
+ }
+
+ udc->matrix = syscon_regmap_lookup_by_phandle(udc->pdev->dev.of_node,
+ "atmel,matrix");
+ if (IS_ERR(udc->matrix))
+ return PTR_ERR(udc->matrix);
+
+ return 0;
+}
+
+static void at91sam9261_udc_pullup(struct at91_udc *udc, int is_on)
+{
+ u32 usbpucr = 0;
+
+ if (is_on)
+ usbpucr = AT91_MATRIX_USBPUCR_PUON;
+
+ regmap_update_bits(udc->matrix, AT91SAM9261_MATRIX_USBPUCR,
+ AT91_MATRIX_USBPUCR_PUON, usbpucr);
+}
+
+static const struct at91_udc_caps at91sam9261_udc_caps = {
+ .init = at91sam9261_udc_init,
+ .pullup = at91sam9261_udc_pullup,
+};
+
+static int at91sam9263_udc_init(struct at91_udc *udc)
+{
+ struct at91_ep *ep;
+ int i;
+
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ ep = &udc->ep[i];
+
+ switch (i) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ ep->maxpacket = 64;
+ break;
+ case 4:
+ case 5:
+ ep->maxpacket = 256;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static const struct at91_udc_caps at91sam9263_udc_caps = {
+ .init = at91sam9263_udc_init,
+ .pullup = at91sam9260_udc_pullup,
+};
+
+static const struct of_device_id at91_udc_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-udc",
+ .data = &at91rm9200_udc_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9260-udc",
+ .data = &at91sam9260_udc_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9261-udc",
+ .data = &at91sam9261_udc_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9263-udc",
+ .data = &at91sam9263_udc_caps,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
+
+static void at91udc_of_init(struct at91_udc *udc, struct device_node *np)
{
struct at91_udc_data *board = &udc->board;
- u32 val;
+ const struct of_device_id *match;
enum of_gpio_flags flags;
+ u32 val;
if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
board->vbus_polled = 1;
@@ -1705,6 +1797,10 @@ static void at91udc_of_init(struct at91_udc *udc,
&flags);
board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+ match = of_match_node(at91_udc_dt_ids, np);
+ if (match)
+ udc->caps = match->data;
}
static int at91udc_probe(struct platform_device *pdev)
@@ -1713,97 +1809,67 @@ static int at91udc_probe(struct platform_device *pdev)
struct at91_udc *udc;
int retval;
struct resource *res;
+ struct at91_ep *ep;
+ int i;
- if (!dev_get_platdata(dev) && !pdev->dev.of_node) {
- /* small (so we copy it) but critical! */
- DBG("missing platform_data\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENXIO;
-
- if (!request_mem_region(res->start, resource_size(res), driver_name)) {
- DBG("someone's using UDC memory\n");
- return -EBUSY;
- }
+ udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+ if (!udc)
+ return -ENOMEM;
/* init software state */
- udc = &controller;
udc->gadget.dev.parent = dev;
- if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
- at91udc_of_init(udc, pdev->dev.of_node);
- else
- memcpy(&udc->board, dev_get_platdata(dev),
- sizeof(struct at91_udc_data));
+ at91udc_of_init(udc, pdev->dev.of_node);
udc->pdev = pdev;
udc->enabled = 0;
spin_lock_init(&udc->lock);
- /* rm9200 needs manual D+ pullup; off by default */
- if (cpu_is_at91rm9200()) {
- if (!gpio_is_valid(udc->board.pullup_pin)) {
- DBG("no D+ pullup?\n");
- retval = -ENODEV;
- goto fail0;
- }
- retval = gpio_request(udc->board.pullup_pin, "udc_pullup");
- if (retval) {
- DBG("D+ pullup is busy\n");
- goto fail0;
- }
- gpio_direction_output(udc->board.pullup_pin,
- udc->board.pullup_active_low);
- }
+ udc->gadget.ops = &at91_udc_ops;
+ udc->gadget.ep0 = &udc->ep[0].ep;
+ udc->gadget.name = driver_name;
+ udc->gadget.dev.init_name = "gadget";
- /* newer chips have more FIFO memory than rm9200 */
- if (cpu_is_at91sam9260() || cpu_is_at91sam9g20()) {
- udc->ep[0].maxpacket = 64;
- udc->ep[3].maxpacket = 64;
- udc->ep[4].maxpacket = 512;
- udc->ep[5].maxpacket = 512;
- } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
- udc->ep[3].maxpacket = 64;
- } else if (cpu_is_at91sam9263()) {
- udc->ep[0].maxpacket = 64;
- udc->ep[3].maxpacket = 64;
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ ep = &udc->ep[i];
+ ep->ep.name = ep_names[i];
+ ep->ep.ops = &at91_ep_ops;
+ ep->udc = udc;
+ ep->int_mask = BIT(i);
+ if (i != 0 && i != 3)
+ ep->is_pingpong = 1;
}
- udc->udp_baseaddr = ioremap(res->start, resource_size(res));
- if (!udc->udp_baseaddr) {
- retval = -ENOMEM;
- goto fail0a;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ udc->udp_baseaddr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(udc->udp_baseaddr))
+ return PTR_ERR(udc->udp_baseaddr);
+
+ if (udc->caps && udc->caps->init) {
+ retval = udc->caps->init(udc);
+ if (retval)
+ return retval;
}
udc_reinit(udc);
/* get interface and function clocks */
- udc->iclk = clk_get(dev, "udc_clk");
- udc->fclk = clk_get(dev, "udpck");
- if (IS_ENABLED(CONFIG_COMMON_CLK))
- udc->uclk = clk_get(dev, "usb_clk");
- if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk) ||
- (IS_ENABLED(CONFIG_COMMON_CLK) && IS_ERR(udc->uclk))) {
- DBG("clocks missing\n");
- retval = -ENODEV;
- goto fail1;
- }
+ udc->iclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(udc->iclk))
+ return PTR_ERR(udc->iclk);
+
+ udc->fclk = devm_clk_get(dev, "hclk");
+ if (IS_ERR(udc->fclk))
+ return PTR_ERR(udc->fclk);
/* don't do anything until we have both gadget driver and VBUS */
- if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- clk_set_rate(udc->uclk, 48000000);
- retval = clk_prepare(udc->uclk);
- if (retval)
- goto fail1;
- }
+ clk_set_rate(udc->fclk, 48000000);
retval = clk_prepare(udc->fclk);
if (retval)
- goto fail1a;
+ return retval;
retval = clk_prepare_enable(udc->iclk);
if (retval)
- goto fail1b;
+ goto err_unprepare_fclk;
+
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
/* Clear all pending interrupts - UDP may be used by bootloader. */
@@ -1812,18 +1878,21 @@ static int at91udc_probe(struct platform_device *pdev)
/* request UDC and maybe VBUS irqs */
udc->udp_irq = platform_get_irq(pdev, 0);
- retval = request_irq(udc->udp_irq, at91_udc_irq,
- 0, driver_name, udc);
- if (retval < 0) {
+ retval = devm_request_irq(dev, udc->udp_irq, at91_udc_irq, 0,
+ driver_name, udc);
+ if (retval) {
DBG("request irq %d failed\n", udc->udp_irq);
- goto fail1c;
+ goto err_unprepare_iclk;
}
+
if (gpio_is_valid(udc->board.vbus_pin)) {
- retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
- if (retval < 0) {
+ retval = devm_gpio_request(dev, udc->board.vbus_pin,
+ "udc_vbus");
+ if (retval) {
DBG("request vbus pin failed\n");
- goto fail2;
+ goto err_unprepare_iclk;
}
+
gpio_direction_input(udc->board.vbus_pin);
/*
@@ -1840,12 +1909,13 @@ static int at91udc_probe(struct platform_device *pdev)
mod_timer(&udc->vbus_timer,
jiffies + VBUS_POLL_TIMEOUT);
} else {
- if (request_irq(gpio_to_irq(udc->board.vbus_pin),
- at91_vbus_irq, 0, driver_name, udc)) {
+ retval = devm_request_irq(dev,
+ gpio_to_irq(udc->board.vbus_pin),
+ at91_vbus_irq, 0, driver_name, udc);
+ if (retval) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
- retval = -EBUSY;
- goto fail3;
+ goto err_unprepare_iclk;
}
}
} else {
@@ -1854,49 +1924,27 @@ static int at91udc_probe(struct platform_device *pdev)
}
retval = usb_add_gadget_udc(dev, &udc->gadget);
if (retval)
- goto fail4;
+ goto err_unprepare_iclk;
dev_set_drvdata(dev, udc);
device_init_wakeup(dev, 1);
create_debug_file(udc);
INFO("%s version %s\n", driver_name, DRIVER_VERSION);
return 0;
-fail4:
- if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
- free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
-fail3:
- if (gpio_is_valid(udc->board.vbus_pin))
- gpio_free(udc->board.vbus_pin);
-fail2:
- free_irq(udc->udp_irq, udc);
-fail1c:
+
+err_unprepare_iclk:
clk_unprepare(udc->iclk);
-fail1b:
+err_unprepare_fclk:
clk_unprepare(udc->fclk);
-fail1a:
- if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_unprepare(udc->uclk);
-fail1:
- if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
- clk_put(udc->uclk);
- if (!IS_ERR(udc->fclk))
- clk_put(udc->fclk);
- if (!IS_ERR(udc->iclk))
- clk_put(udc->iclk);
- iounmap(udc->udp_baseaddr);
-fail0a:
- if (cpu_is_at91rm9200())
- gpio_free(udc->board.pullup_pin);
-fail0:
- release_mem_region(res->start, resource_size(res));
+
DBG("%s probe failed, %d\n", driver_name, retval);
+
return retval;
}
static int __exit at91udc_remove(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
- struct resource *res;
unsigned long flags;
DBG("remove\n");
@@ -1911,29 +1959,9 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
- if (gpio_is_valid(udc->board.vbus_pin)) {
- free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
- gpio_free(udc->board.vbus_pin);
- }
- free_irq(udc->udp_irq, udc);
- iounmap(udc->udp_baseaddr);
-
- if (cpu_is_at91rm9200())
- gpio_free(udc->board.pullup_pin);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
-
- if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_unprepare(udc->uclk);
clk_unprepare(udc->fclk);
clk_unprepare(udc->iclk);
- clk_put(udc->iclk);
- clk_put(udc->fclk);
- if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_put(udc->uclk);
-
return 0;
}
@@ -1989,15 +2017,6 @@ static int at91udc_resume(struct platform_device *pdev)
#define at91udc_resume NULL
#endif
-#if defined(CONFIG_OF)
-static const struct of_device_id at91_udc_dt_ids[] = {
- { .compatible = "atmel,at91rm9200-udc" },
- { /* sentinel */ }
-};
-
-MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
-#endif
-
static struct platform_driver at91_udc_driver = {
.remove = __exit_p(at91udc_remove),
.shutdown = at91udc_shutdown,
@@ -2005,7 +2024,7 @@ static struct platform_driver at91_udc_driver = {
.resume = at91udc_resume,
.driver = {
.name = (char *) driver_name,
- .of_match_table = of_match_ptr(at91_udc_dt_ids),
+ .of_match_table = at91_udc_dt_ids,
},
};
diff --git a/drivers/usb/gadget/udc/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h
index 467dcfb74a51..2679c8b217cc 100644
--- a/drivers/usb/gadget/udc/at91_udc.h
+++ b/drivers/usb/gadget/udc/at91_udc.h
@@ -107,6 +107,11 @@ struct at91_ep {
unsigned fifo_bank:1;
};
+struct at91_udc_caps {
+ int (*init)(struct at91_udc *udc);
+ void (*pullup)(struct at91_udc *udc, int is_on);
+};
+
/*
* driver is non-SMP, and just blocks IRQs whenever it needs
* access protection for chip registers or driver state
@@ -115,6 +120,7 @@ struct at91_udc {
struct usb_gadget gadget;
struct at91_ep ep[NUM_ENDPOINTS];
struct usb_gadget_driver *driver;
+ const struct at91_udc_caps *caps;
unsigned vbus:1;
unsigned enabled:1;
unsigned clocked:1;
@@ -125,7 +131,7 @@ struct at91_udc {
unsigned active_suspend:1;
u8 addr;
struct at91_udc_data board;
- struct clk *iclk, *fclk, *uclk;
+ struct clk *iclk, *fclk;
struct platform_device *pdev;
struct proc_dir_entry *pde;
void __iomem *udp_baseaddr;
@@ -133,6 +139,7 @@ struct at91_udc {
spinlock_t lock;
struct timer_list vbus_timer;
struct work_struct vbus_timer_work;
+ struct regmap *matrix;
};
static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/include/dt-bindings/clock/sh73a0-clock.h b/include/dt-bindings/clock/sh73a0-clock.h
new file mode 100644
index 000000000000..1dd3eb2b7d90
--- /dev/null
+++ b/include/dt-bindings/clock/sh73a0-clock.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SH73A0_H__
+#define __DT_BINDINGS_CLOCK_SH73A0_H__
+
+/* CPG */
+#define SH73A0_CLK_MAIN 0
+#define SH73A0_CLK_PLL0 1
+#define SH73A0_CLK_PLL1 2
+#define SH73A0_CLK_PLL2 3
+#define SH73A0_CLK_PLL3 4
+#define SH73A0_CLK_DSI0PHY 5
+#define SH73A0_CLK_DSI1PHY 6
+#define SH73A0_CLK_ZG 7
+#define SH73A0_CLK_M3 8
+#define SH73A0_CLK_B 9
+#define SH73A0_CLK_M1 10
+#define SH73A0_CLK_M2 11
+#define SH73A0_CLK_Z 12
+#define SH73A0_CLK_ZX 13
+#define SH73A0_CLK_HP 14
+
+/* MSTP0 */
+#define SH73A0_CLK_IIC2 1
+
+/* MSTP1 */
+#define SH73A0_CLK_CEU1 29
+#define SH73A0_CLK_CSI2_RX1 28
+#define SH73A0_CLK_CEU0 27
+#define SH73A0_CLK_CSI2_RX0 26
+#define SH73A0_CLK_TMU0 25
+#define SH73A0_CLK_DSITX0 18
+#define SH73A0_CLK_IIC0 16
+#define SH73A0_CLK_SGX 12
+#define SH73A0_CLK_LCDC0 0
+
+/* MSTP2 */
+#define SH73A0_CLK_SCIFA7 19
+#define SH73A0_CLK_SY_DMAC 18
+#define SH73A0_CLK_MP_DMAC 17
+#define SH73A0_CLK_SCIFA5 7
+#define SH73A0_CLK_SCIFB 6
+#define SH73A0_CLK_SCIFA0 4
+#define SH73A0_CLK_SCIFA1 3
+#define SH73A0_CLK_SCIFA2 2
+#define SH73A0_CLK_SCIFA3 1
+#define SH73A0_CLK_SCIFA4 0
+
+/* MSTP3 */
+#define SH73A0_CLK_SCIFA6 31
+#define SH73A0_CLK_CMT1 29
+#define SH73A0_CLK_FSI 28
+#define SH73A0_CLK_IRDA 25
+#define SH73A0_CLK_IIC1 23
+#define SH73A0_CLK_USB 22
+#define SH73A0_CLK_FLCTL 15
+#define SH73A0_CLK_SDHI0 14
+#define SH73A0_CLK_SDHI1 13
+#define SH73A0_CLK_MMCIF0 12
+#define SH73A0_CLK_SDHI2 11
+#define SH73A0_CLK_TPU0 4
+#define SH73A0_CLK_TPU1 3
+#define SH73A0_CLK_TPU2 2
+#define SH73A0_CLK_TPU3 1
+#define SH73A0_CLK_TPU4 0
+
+/* MSTP4 */
+#define SH73A0_CLK_IIC3 11
+#define SH73A0_CLK_IIC4 10
+#define SH73A0_CLK_KEYSC 3
+
+#endif
diff --git a/include/linux/mfd/syscon/atmel-matrix.h b/include/linux/mfd/syscon/atmel-matrix.h
new file mode 100644
index 000000000000..8293c3e2a82a
--- /dev/null
+++ b/include/linux/mfd/syscon/atmel-matrix.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2014 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_MATRIX_H
+#define _LINUX_MFD_SYSCON_ATMEL_MATRIX_H
+
+#define AT91SAM9260_MATRIX_MCFG 0x00
+#define AT91SAM9260_MATRIX_SCFG 0x40
+#define AT91SAM9260_MATRIX_PRS 0x80
+#define AT91SAM9260_MATRIX_MRCR 0x100
+#define AT91SAM9260_MATRIX_EBICSA 0x11c
+
+#define AT91SAM9261_MATRIX_MRCR 0x0
+#define AT91SAM9261_MATRIX_SCFG 0x4
+#define AT91SAM9261_MATRIX_TCR 0x24
+#define AT91SAM9261_MATRIX_EBICSA 0x30
+#define AT91SAM9261_MATRIX_USBPUCR 0x34
+
+#define AT91SAM9263_MATRIX_MCFG 0x00
+#define AT91SAM9263_MATRIX_SCFG 0x40
+#define AT91SAM9263_MATRIX_PRS 0x80
+#define AT91SAM9263_MATRIX_MRCR 0x100
+#define AT91SAM9263_MATRIX_TCR 0x114
+#define AT91SAM9263_MATRIX_EBI0CSA 0x120
+#define AT91SAM9263_MATRIX_EBI1CSA 0x124
+
+#define AT91SAM9RL_MATRIX_MCFG 0x00
+#define AT91SAM9RL_MATRIX_SCFG 0x40
+#define AT91SAM9RL_MATRIX_PRS 0x80
+#define AT91SAM9RL_MATRIX_MRCR 0x100
+#define AT91SAM9RL_MATRIX_TCR 0x114
+#define AT91SAM9RL_MATRIX_EBICSA 0x120
+
+#define AT91SAM9G45_MATRIX_MCFG 0x00
+#define AT91SAM9G45_MATRIX_SCFG 0x40
+#define AT91SAM9G45_MATRIX_PRS 0x80
+#define AT91SAM9G45_MATRIX_MRCR 0x100
+#define AT91SAM9G45_MATRIX_TCR 0x110
+#define AT91SAM9G45_MATRIX_DDRMPR 0x118
+#define AT91SAM9G45_MATRIX_EBICSA 0x128
+
+#define AT91SAM9N12_MATRIX_MCFG 0x00
+#define AT91SAM9N12_MATRIX_SCFG 0x40
+#define AT91SAM9N12_MATRIX_PRS 0x80
+#define AT91SAM9N12_MATRIX_MRCR 0x100
+#define AT91SAM9N12_MATRIX_EBICSA 0x118
+
+#define AT91SAM9X5_MATRIX_MCFG 0x00
+#define AT91SAM9X5_MATRIX_SCFG 0x40
+#define AT91SAM9X5_MATRIX_PRS 0x80
+#define AT91SAM9X5_MATRIX_MRCR 0x100
+#define AT91SAM9X5_MATRIX_EBICSA 0x120
+
+#define SAMA5D3_MATRIX_MCFG 0x00
+#define SAMA5D3_MATRIX_SCFG 0x40
+#define SAMA5D3_MATRIX_PRS 0x80
+#define SAMA5D3_MATRIX_MRCR 0x100
+
+#define AT91_MATRIX_MCFG(o, x) ((o) + ((x) * 0x4))
+#define AT91_MATRIX_ULBT GENMASK(2, 0)
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG(o, x) ((o) + ((x) * 0x4))
+#define AT91_MATRIX_SLOT_CYCLE GENMASK(7, 0)
+#define AT91_MATRIX_DEFMSTR_TYPE GENMASK(17, 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR GENMASK(20, 18)
+#define AT91_MATRIX_ARBT GENMASK(25, 24)
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_ITCM_SIZE GENMASK(3, 0)
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE GENMASK(7, 4)
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_PRAS(o, x) ((o) + ((x) * 0x8))
+#define AT91_MATRIX_PRBS(o, x) ((o) + ((x) * 0x8) + 0x4)
+#define AT91_MATRIX_MPR(x) GENMASK(((x) * 0x4) + 1, ((x) * 0x4))
+
+#define AT91_MATRIX_RCB(x) BIT(x)
+
+#define AT91_MATRIX_CSA(cs, val) (val << (cs))
+#define AT91_MATRIX_DBPUC BIT(8)
+#define AT91_MATRIX_DBPDC BIT(9)
+#define AT91_MATRIX_VDDIOMSEL BIT(16)
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_IOSR BIT(17)
+#define AT91_MATRIX_DDR_IOSR BIT(18)
+#define AT91_MATRIX_NFD0_SELECT BIT(24)
+#define AT91_MATRIX_DDR_MP_EN BIT(25)
+#define AT91_MATRIX_EBI_NUM_CS 8
+
+#define AT91_MATRIX_USBPUCR_PUON BIT(30)
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_MATRIX_H */
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
new file mode 100644
index 000000000000..be6ebe64eebe
--- /dev/null
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -0,0 +1,173 @@
+/*
+ * Atmel SMC (Static Memory Controller) register offsets and bit definitions.
+ *
+ * Copyright (C) 2014 Atmel
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_
+#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_
+
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+
+#define AT91SAM9_SMC_GENERIC 0x00
+#define AT91SAM9_SMC_GENERIC_BLK_SZ 0x10
+
+#define SAMA5_SMC_GENERIC 0x600
+#define SAMA5_SMC_GENERIC_BLK_SZ 0x14
+
+#define AT91SAM9_SMC_SETUP(o) ((o) + 0x00)
+#define AT91SAM9_SMC_NWESETUP(x) (x)
+#define AT91SAM9_SMC_NCS_WRSETUP(x) ((x) << 8)
+#define AT91SAM9_SMC_NRDSETUP(x) ((x) << 16)
+#define AT91SAM9_SMC_NCS_NRDSETUP(x) ((x) << 24)
+
+#define AT91SAM9_SMC_PULSE(o) ((o) + 0x04)
+#define AT91SAM9_SMC_NWEPULSE(x) (x)
+#define AT91SAM9_SMC_NCS_WRPULSE(x) ((x) << 8)
+#define AT91SAM9_SMC_NRDPULSE(x) ((x) << 16)
+#define AT91SAM9_SMC_NCS_NRDPULSE(x) ((x) << 24)
+
+#define AT91SAM9_SMC_CYCLE(o) ((o) + 0x08)
+#define AT91SAM9_SMC_NWECYCLE(x) (x)
+#define AT91SAM9_SMC_NRDCYCLE(x) ((x) << 16)
+
+#define AT91SAM9_SMC_MODE(o) ((o) + 0x0c)
+#define SAMA5_SMC_MODE(o) ((o) + 0x10)
+#define AT91_SMC_READMODE BIT(0)
+#define AT91_SMC_READMODE_NCS (0 << 0)
+#define AT91_SMC_READMODE_NRD (1 << 0)
+#define AT91_SMC_WRITEMODE BIT(1)
+#define AT91_SMC_WRITEMODE_NCS (0 << 1)
+#define AT91_SMC_WRITEMODE_NWE (1 << 1)
+#define AT91_SMC_EXNWMODE GENMASK(5, 4)
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
+#define AT91_SMC_BAT BIT(8)
+#define AT91_SMC_BAT_SELECT (0 << 8)
+#define AT91_SMC_BAT_WRITE (1 << 8)
+#define AT91_SMC_DBW GENMASK(13, 12)
+#define AT91_SMC_DBW_8 (0 << 12)
+#define AT91_SMC_DBW_16 (1 << 12)
+#define AT91_SMC_DBW_32 (2 << 12)
+#define AT91_SMC_TDF GENMASK(19, 16)
+#define AT91_SMC_TDF_(x) ((((x) - 1) << 16) & AT91_SMC_TDF)
+#define AT91_SMC_TDF_MAX 16
+#define AT91_SMC_TDFMODE_OPTIMIZED BIT(20)
+#define AT91_SMC_PMEN BIT(24)
+#define AT91_SMC_PS GENMASK(29, 28)
+#define AT91_SMC_PS_4 (0 << 28)
+#define AT91_SMC_PS_8 (1 << 28)
+#define AT91_SMC_PS_16 (2 << 28)
+#define AT91_SMC_PS_32 (3 << 28)
+
+
+/*
+ * This function converts a setup timing expressed in nanoseconds into an
+ * encoded value that can be written in the SMC_SETUP register.
+ *
+ * The following formula is described in atmel datasheets (section
+ * "SMC Setup Register"):
+ *
+ * setup length = (128* SETUP[5] + SETUP[4:0])
+ *
+ * where setup length is the timing expressed in cycles.
+ */
+static inline u32 at91sam9_smc_setup_ns_to_cycles(unsigned int clk_rate,
+ u32 timing_ns)
+{
+ u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
+ u32 coded_cycles = 0;
+ u32 cycles;
+
+ cycles = DIV_ROUND_UP(timing_ns, clk_period);
+ if (cycles / 32) {
+ coded_cycles |= 1 << 5;
+ if (cycles < 128)
+ cycles = 0;
+ }
+
+ coded_cycles |= cycles % 32;
+
+ return coded_cycles;
+}
+
+/*
+ * This function converts a pulse timing expressed in nanoseconds into an
+ * encoded value that can be written in the SMC_PULSE register.
+ *
+ * The following formula is described in atmel datasheets (section
+ * "SMC Pulse Register"):
+ *
+ * pulse length = (256* PULSE[6] + PULSE[5:0])
+ *
+ * where pulse length is the timing expressed in cycles.
+ */
+static inline u32 at91sam9_smc_pulse_ns_to_cycles(unsigned int clk_rate,
+ u32 timing_ns)
+{
+ u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
+ u32 coded_cycles = 0;
+ u32 cycles;
+
+ cycles = DIV_ROUND_UP(timing_ns, clk_period);
+ if (cycles / 64) {
+ coded_cycles |= 1 << 6;
+ if (cycles < 256)
+ cycles = 0;
+ }
+
+ coded_cycles |= cycles % 64;
+
+ return coded_cycles;
+}
+
+/*
+ * This function converts a cycle timing expressed in nanoseconds into an
+ * encoded value that can be written in the SMC_CYCLE register.
+ *
+ * The following formula is described in atmel datasheets (section
+ * "SMC Cycle Register"):
+ *
+ * cycle length = (CYCLE[8:7]*256 + CYCLE[6:0])
+ *
+ * where cycle length is the timing expressed in cycles.
+ */
+static inline u32 at91sam9_smc_cycle_ns_to_cycles(unsigned int clk_rate,
+ u32 timing_ns)
+{
+ u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
+ u32 coded_cycles = 0;
+ u32 cycles;
+
+ cycles = DIV_ROUND_UP(timing_ns, clk_period);
+ if (cycles / 128) {
+ coded_cycles = cycles / 256;
+ cycles %= 256;
+ if (cycles >= 128) {
+ coded_cycles++;
+ cycles = 0;
+ }
+
+ if (coded_cycles > 0x3) {
+ coded_cycles = 0x3;
+ cycles = 0x7f;
+ }
+
+ coded_cycles <<= 7;
+ }
+
+ coded_cycles |= cycles % 128;
+
+ return coded_cycles;
+}
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
diff --git a/include/linux/platform_data/cpuidle-exynos.h b/include/linux/platform_data/cpuidle-exynos.h
new file mode 100644
index 000000000000..bfa40e4c5d5f
--- /dev/null
+++ b/include/linux/platform_data/cpuidle-exynos.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __CPUIDLE_EXYNOS_H
+#define __CPUIDLE_EXYNOS_H
+
+struct cpuidle_exynos_data {
+ int (*cpu0_enter_aftr)(void);
+ int (*cpu1_powerdown)(void);
+ void (*pre_enter_aftr)(void);
+ void (*post_enter_aftr)(void);
+};
+
+#endif