summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/bus/mvebu-mbus.c105
1 files changed, 89 insertions, 16 deletions
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index a62c8ae253c3..fb9ec6221730 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -58,6 +58,7 @@
#include <linux/debugfs.h>
#include <linux/log2.h>
#include <linux/syscore_ops.h>
+#include <linux/memblock.h>
/*
* DDR target is the same on all platforms.
@@ -101,7 +102,9 @@
/* Relative to mbusbridge_base */
#define MBUS_BRIDGE_CTRL_OFF 0x0
+#define MBUS_BRIDGE_SIZE_MASK 0xffff0000
#define MBUS_BRIDGE_BASE_OFF 0x4
+#define MBUS_BRIDGE_BASE_MASK 0xffff0000
/* Maximum number of windows, for all known platforms */
#define MBUS_WINS_MAX 20
@@ -574,36 +577,106 @@ static unsigned int armada_xp_mbus_win_remap_offset(int win)
return MVEBU_MBUS_NO_REMAP;
}
+/*
+ * Use the memblock information to find the MBus bridge hole in the
+ * physical address space.
+ */
+static void __init
+mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
+{
+ struct memblock_region *r;
+ uint64_t s = 0;
+
+ for_each_memblock(memory, r) {
+ /*
+ * This part of the memory is above 4 GB, so we don't
+ * care for the MBus bridge hole.
+ */
+ if (r->base >= 0x100000000)
+ continue;
+
+ /*
+ * The MBus bridge hole is at the end of the RAM under
+ * the 4 GB limit.
+ */
+ if (r->base + r->size > s)
+ s = r->base + r->size;
+ }
+
+ *start = s;
+ *end = 0x100000000;
+}
+
static void __init
mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
{
int i;
int cs;
+ uint64_t mbus_bridge_base, mbus_bridge_end;
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+ mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
+
for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
- u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+ u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+ u64 end;
+ struct mbus_dram_window *w;
+
+ /* Ignore entries that are not enabled */
+ if (!(size & DDR_SIZE_ENABLED))
+ continue;
/*
- * We only take care of entries for which the chip
- * select is enabled, and that don't have high base
- * address bits set (devices can only access the first
- * 32 bits of the memory).
+ * Ignore entries whose base address is above 2^32,
+ * since devices cannot DMA to such high addresses
*/
- if ((size & DDR_SIZE_ENABLED) &&
- !(base & DDR_BASE_CS_HIGH_MASK)) {
- struct mbus_dram_window *w;
+ if (base & DDR_BASE_CS_HIGH_MASK)
+ continue;
- w = &mvebu_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- if (mbus->hw_io_coherency)
- w->mbus_attr |= ATTR_HW_COHERENCY;
- w->base = base & DDR_BASE_CS_LOW_MASK;
- w->size = (size | ~DDR_SIZE_MASK) + 1;
+ base = base & DDR_BASE_CS_LOW_MASK;
+ size = (size | ~DDR_SIZE_MASK) + 1;
+ end = base + size;
+
+ /*
+ * Adjust base/size of the current CS to make sure it
+ * doesn't overlap with the MBus bridge hole. This is
+ * particularly important for devices that do DMA from
+ * DRAM to a SRAM mapped in a MBus window, such as the
+ * CESA cryptographic engine.
+ */
+
+ /*
+ * The CS is fully enclosed inside the MBus bridge
+ * area, so ignore it.
+ */
+ if (base >= mbus_bridge_base && end <= mbus_bridge_end)
+ continue;
+
+ /*
+ * Beginning of CS overlaps with end of MBus, raise CS
+ * base address, and shrink its size.
+ */
+ if (base >= mbus_bridge_base && end > mbus_bridge_end) {
+ size -= mbus_bridge_end - base;
+ base = mbus_bridge_end;
}
+
+ /*
+ * End of CS overlaps with beginning of MBus, shrink
+ * CS size.
+ */
+ if (base < mbus_bridge_base && end > mbus_bridge_base)
+ size -= end - mbus_bridge_base;
+
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ if (mbus->hw_io_coherency)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+ w->base = base;
+ w->size = size;
}
mvebu_mbus_dram_info.num_cs = cs;
}