diff options
| -rw-r--r-- | drivers/net/phy/at803x.c | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 2aa7b2e60046..1eb5d4fb8925 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -15,6 +15,15 @@ #include <linux/of_gpio.h> #include <linux/gpio/consumer.h> +#define AT803X_SPECIFIC_STATUS 0x11 +#define AT803X_SS_SPEED_MASK (3 << 14) +#define AT803X_SS_SPEED_1000 (2 << 14) +#define AT803X_SS_SPEED_100 (1 << 14) +#define AT803X_SS_SPEED_10 (0 << 14) +#define AT803X_SS_DUPLEX BIT(13) +#define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11) +#define AT803X_SS_MDIX BIT(6) + #define AT803X_INTR_ENABLE 0x12 #define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15) #define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14) @@ -357,6 +366,64 @@ static int at803x_aneg_done(struct phy_device *phydev) return aneg_done; } +static int at803x_read_status(struct phy_device *phydev) +{ + int ss, err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + err = genphy_read_lpa(phydev); + if (err < 0) + return err; + + /* Read the AT8035 PHY-Specific Status register, which indicates the + * speed and duplex that the PHY is actually using, irrespective of + * whether we are in autoneg mode or not. + */ + ss = phy_read(phydev, AT803X_SPECIFIC_STATUS); + if (ss < 0) + return ss; + + if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) { + switch (ss & AT803X_SS_SPEED_MASK) { + case AT803X_SS_SPEED_10: + phydev->speed = SPEED_10; + break; + case AT803X_SS_SPEED_100: + phydev->speed = SPEED_100; + break; + case AT803X_SS_SPEED_1000: + phydev->speed = SPEED_1000; + break; + } + if (ss & AT803X_SS_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + if (ss & AT803X_SS_MDIX) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + } + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) + phy_resolve_aneg_pause(phydev); + + return 0; +} + static struct phy_driver at803x_driver[] = { { /* ATHEROS 8035 */ @@ -370,6 +437,7 @@ static struct phy_driver at803x_driver[] = { .suspend = at803x_suspend, .resume = at803x_resume, /* PHY_GBIT_FEATURES */ + .read_status = at803x_read_status, .ack_interrupt = at803x_ack_interrupt, .config_intr = at803x_config_intr, }, { @@ -399,6 +467,7 @@ static struct phy_driver at803x_driver[] = { .suspend = at803x_suspend, .resume = at803x_resume, /* PHY_GBIT_FEATURES */ + .read_status = at803x_read_status, .aneg_done = at803x_aneg_done, .ack_interrupt = &at803x_ack_interrupt, .config_intr = &at803x_config_intr, |