summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/mips/Kconfig6
-rw-r--r--arch/mips/alchemy/common/platform.c22
-rw-r--r--arch/mips/generic/init.c4
-rw-r--r--arch/mips/include/asm/mach-ip27/topology.h11
-rw-r--r--arch/mips/include/asm/pci/bridge.h14
-rw-r--r--arch/mips/include/asm/sn/irq_alloc.h11
-rw-r--r--arch/mips/include/asm/xtalk/xtalk.h9
-rw-r--r--arch/mips/kernel/cpu-probe.c8
-rw-r--r--arch/mips/kernel/perf_event_mipsxx.c21
-rw-r--r--arch/mips/pci/Makefile3
-rw-r--r--arch/mips/pci/ops-bridge.c302
-rw-r--r--arch/mips/pci/pci-ip27.c181
-rw-r--r--arch/mips/pci/pci-xtalk-bridge.c610
-rw-r--r--arch/mips/sgi-ip22/ip22-platform.c13
-rw-r--r--arch/mips/sgi-ip27/ip27-init.c2
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c190
-rw-r--r--arch/mips/sgi-ip27/ip27-xtalk.c61
-rw-r--r--include/linux/platform_data/xtalk-bridge.h22
18 files changed, 831 insertions, 659 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 677e5bfeff47..70d3200476bf 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -674,7 +674,10 @@ config SGI_IP27
select SYS_HAS_EARLY_PRINTK
select HAVE_PCI
select IRQ_MIPS_CPU
+ select IRQ_DOMAIN_HIERARCHY
select NR_CPUS_DEFAULT_64
+ select PCI_DRIVERS_GENERIC
+ select PCI_XTALK_BRIDGE
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
@@ -1241,6 +1244,9 @@ config IRQ_GT641XX
config PCI_GT64XXX_PCI0
bool
+config PCI_XTALK_BRIDGE
+ bool
+
config NO_EXCEPT_FILL
bool
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 1454d9f6ab2d..b8f3397c59c9 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -131,9 +131,7 @@ static void __init alchemy_setup_uarts(int ctype)
}
-/* The dmamask must be set for OHCI/EHCI to work */
-static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
-static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
+static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
/* Power on callback for the ehci platform driver */
static int alchemy_ehci_power_on(struct platform_device *pdev)
@@ -231,7 +229,7 @@ static void __init alchemy_setup_usb(int ctype)
res[1].flags = IORESOURCE_IRQ;
pdev->name = "ohci-platform";
pdev->id = 0;
- pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+ pdev->dev.dma_mask = &alchemy_all_dmamask;
pdev->dev.platform_data = &alchemy_ohci_pdata;
if (platform_device_register(pdev))
@@ -251,7 +249,7 @@ static void __init alchemy_setup_usb(int ctype)
res[1].flags = IORESOURCE_IRQ;
pdev->name = "ehci-platform";
pdev->id = 0;
- pdev->dev.dma_mask = &alchemy_ehci_dmamask;
+ pdev->dev.dma_mask = &alchemy_all_dmamask;
pdev->dev.platform_data = &alchemy_ehci_pdata;
if (platform_device_register(pdev))
@@ -271,7 +269,7 @@ static void __init alchemy_setup_usb(int ctype)
res[1].flags = IORESOURCE_IRQ;
pdev->name = "ohci-platform";
pdev->id = 1;
- pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+ pdev->dev.dma_mask = &alchemy_all_dmamask;
pdev->dev.platform_data = &alchemy_ohci_pdata;
if (platform_device_register(pdev))
@@ -338,7 +336,11 @@ static struct platform_device au1xxx_eth0_device = {
.name = "au1000-eth",
.id = 0,
.num_resources = MAC_RES_COUNT,
- .dev.platform_data = &au1xxx_eth0_platform_data,
+ .dev = {
+ .dma_mask = &alchemy_all_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &au1xxx_eth0_platform_data,
+ },
};
static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
@@ -370,7 +372,11 @@ static struct platform_device au1xxx_eth1_device = {
.name = "au1000-eth",
.id = 1,
.num_resources = MAC_RES_COUNT,
- .dev.platform_data = &au1xxx_eth1_platform_data,
+ .dev = {
+ .dma_mask = &alchemy_all_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &au1xxx_eth1_platform_data,
+ },
};
void __init au1xxx_override_eth_cfg(unsigned int port,
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
index a106f8113842..a84475f1924f 100644
--- a/arch/mips/generic/init.c
+++ b/arch/mips/generic/init.c
@@ -43,14 +43,14 @@ void __init *plat_get_fdt(void)
/* Already set up */
return (void *)fdt;
- if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+ if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_passed_dtb)) {
/*
* We booted using the UHI boot protocol, so we have been
* provided with the appropriate device tree for the board.
* Make use of it & search for any machine struct based upon
* the root compatible string.
*/
- fdt = (void *)fw_arg1;
+ fdt = (void *)fw_passed_dtb;
for_each_mips_machine(check_mach) {
match = mips_machine_is_compatible(check_mach, fdt);
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index 42ea1313626c..965f0793a5f9 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -7,18 +7,9 @@
#include <asm/mmzone.h>
struct cpuinfo_ip27 {
-// cpuid_t p_cpuid; /* PROM assigned cpuid */
cnodeid_t p_nodeid; /* my node ID in compact-id-space */
nasid_t p_nasid; /* my node ID in numa-as-id-space */
unsigned char p_slice; /* Physical position on node board */
-#if 0
- unsigned long loops_per_sec;
- unsigned long ipi_count;
- unsigned long irq_attempt[NR_IRQS];
- unsigned long smp_local_irq_count;
- unsigned long prof_multiplier;
- unsigned long prof_counter;
-#endif
};
extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
@@ -30,7 +21,7 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
struct pci_bus;
extern int pcibus_to_node(struct pci_bus *);
-#define cpumask_of_pcibus(bus) (cpu_online_mask)
+#define cpumask_of_pcibus(bus) (cpumask_of_node(pcibus_to_node(bus)))
extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index 23574c27eb40..a92cd30b48c9 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -801,15 +801,13 @@ struct bridge_err_cmdword {
#define PCI64_ATTR_RMF_SHFT 48
struct bridge_controller {
- struct pci_controller pc;
- struct resource mem;
- struct resource io;
struct resource busn;
struct bridge_regs *base;
- nasid_t nasid;
- unsigned int widget_id;
- u64 baddr;
+ unsigned long baddr;
+ unsigned long intr_addr;
+ struct irq_domain *domain;
unsigned int pci_int[8];
+ nasid_t nasid;
};
#define BRIDGE_CONTROLLER(bus) \
@@ -822,8 +820,4 @@ struct bridge_controller {
#define bridge_clr(bc, reg, val) \
__raw_writel(__raw_readl(&bc->base->reg) & ~(val), &bc->base->reg)
-extern int request_bridge_irq(struct bridge_controller *bc, int pin);
-
-extern struct pci_ops bridge_pci_ops;
-
#endif /* _ASM_PCI_BRIDGE_H */
diff --git a/arch/mips/include/asm/sn/irq_alloc.h b/arch/mips/include/asm/sn/irq_alloc.h
new file mode 100644
index 000000000000..09b89cecff56
--- /dev/null
+++ b/arch/mips/include/asm/sn/irq_alloc.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SN_IRQ_ALLOC_H
+#define __ASM_SN_IRQ_ALLOC_H
+
+struct irq_alloc_info {
+ void *ctrl;
+ nasid_t nasid;
+ int pin;
+};
+
+#endif /* __ASM_SN_IRQ_ALLOC_H */
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
index 26d2ed1fa917..680e7efebbaf 100644
--- a/arch/mips/include/asm/xtalk/xtalk.h
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -47,15 +47,6 @@ typedef struct xtalk_piomap_s *xtalk_piomap_t;
#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
#define XIO_PACK(p, o) ((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
-#ifdef CONFIG_PCI
-extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
-#else
-static inline int bridge_probe(nasid_t nasid, int widget, int masterwid)
-{
- return 0;
-}
-#endif
-
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_XTALK_XTALK_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index d5e335e6846a..6126b77d5a62 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1973,6 +1973,14 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
panic("Unknown Ingenic Processor ID!");
break;
}
+
+ /*
+ * The config0 register in the Xburst CPUs with a processor ID of
+ * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
+ * but they don't actually support this ISA.
+ */
+ if ((c->processor_id & PRID_COMP_MASK) == PRID_COMP_INGENIC_D0)
+ c->isa_level &= ~MIPS_CPU_ISA_M32R2;
}
static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 413863508f6f..d67fb64e908c 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -64,17 +64,11 @@ struct mips_perf_event {
#define CNTR_EVEN 0x55555555
#define CNTR_ODD 0xaaaaaaaa
#define CNTR_ALL 0xffffffff
-#ifdef CONFIG_MIPS_MT_SMP
enum {
T = 0,
V = 1,
P = 2,
} range;
-#else
- #define T
- #define V
- #define P
-#endif
};
static struct mips_perf_event raw_event;
@@ -325,9 +319,7 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
{
struct perf_event *event = container_of(evt, struct perf_event, hw);
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-#ifdef CONFIG_MIPS_MT_SMP
unsigned int range = evt->event_base >> 24;
-#endif /* CONFIG_MIPS_MT_SMP */
WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
@@ -336,21 +328,15 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
/* Make sure interrupt enabled. */
MIPS_PERFCTRL_IE;
-#ifdef CONFIG_CPU_BMIPS5000
- {
+ if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) {
/* enable the counter for the calling thread */
cpuc->saved_ctrl[idx] |=
(1 << (12 + vpe_id())) | BRCM_PERFCTRL_TC;
- }
-#else
-#ifdef CONFIG_MIPS_MT_SMP
- if (range > V) {
+ } else if (IS_ENABLED(CONFIG_MIPS_MT_SMP) && range > V) {
/* The counter is processor wide. Set it up to count all TCs. */
pr_debug("Enabling perf counter for all TCs\n");
cpuc->saved_ctrl[idx] |= M_TC_EN_ALL;
- } else
-#endif /* CONFIG_MIPS_MT_SMP */
- {
+ } else {
unsigned int cpu, ctrl;
/*
@@ -365,7 +351,6 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
cpuc->saved_ctrl[idx] |= ctrl;
pr_debug("Enabling perf counter for CPU%d\n", cpu);
}
-#endif /* CONFIG_CPU_BMIPS5000 */
/*
* We do not actually let the counter run. Leave it until start().
*/
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c4f976593061..d6de4cb2e31c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
+obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
#
# These are still pretty much in the old state, watch, go blind.
#
@@ -39,7 +40,7 @@ obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o
+obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
deleted file mode 100644
index df95b0da08f2..000000000000
--- a/arch/mips/pci/ops-bridge.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999, 2000, 04, 06 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#include <linux/pci.h>
-#include <asm/paccess.h>
-#include <asm/pci/bridge.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Most of the IOC3 PCI config register aren't present
- * we emulate what is needed for a normal PCI enumeration
- */
-static u32 emulate_ioc3_cfg(int where, int size)
-{
- if (size == 1 && where == 0x3d)
- return 0x01;
- else if (size == 2 && where == 0x3c)
- return 0x0100;
- else if (size == 4 && where == 0x3c)
- return 0x00000100;
-
- return 0;
-}
-
-/*
- * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
- * not really documented, so right now I can't write code which uses it.
- * Therefore we use type 0 accesses for now even though they won't work
- * correctly for PCI-to-PCI bridges.
- *
- * The function is complicated by the ultimate brokenness of the IOC3 chip
- * which is used in SGI systems. The IOC3 can only handle 32-bit PCI
- * accesses and does only decode parts of it's address space.
- */
-
-static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
- struct bridge_regs *bridge = bc->base;
- int slot = PCI_SLOT(devfn);
- int fn = PCI_FUNC(devfn);
- volatile void *addr;
- u32 cf, shift, mask;
- int res;
-
- addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * IOC3 is broken beyond belief ... Don't even give the
- * generic PCI code a chance to look at it for real ...
- */
- if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
- goto is_ioc3;
-
- addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
-
- if (size == 1)
- res = get_dbe(*value, (u8 *) addr);
- else if (size == 2)
- res = get_dbe(*value, (u16 *) addr);
- else
- res = get_dbe(*value, (u32 *) addr);
-
- return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
- /*
- * IOC3 special handling
- */
- if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = emulate_ioc3_cfg(where, size);
- return PCIBIOS_SUCCESSFUL;
- }
-
- addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- shift = ((where & 3) << 3);
- mask = (0xffffffffU >> ((4 - size) << 3));
- *value = (cf >> shift) & mask;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
- struct bridge_regs *bridge = bc->base;
- int busno = bus->number;
- int slot = PCI_SLOT(devfn);
- int fn = PCI_FUNC(devfn);
- volatile void *addr;
- u32 cf, shift, mask;
- int res;
-
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
- addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * IOC3 is broken beyond belief ... Don't even give the
- * generic PCI code a chance to look at it for real ...
- */
- if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
- goto is_ioc3;
-
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
- addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
-
- if (size == 1)
- res = get_dbe(*value, (u8 *) addr);
- else if (size == 2)
- res = get_dbe(*value, (u16 *) addr);
- else
- res = get_dbe(*value, (u32 *) addr);
-
- return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
- /*
- * IOC3 special handling
- */
- if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = emulate_ioc3_cfg(where, size);
- return PCIBIOS_SUCCESSFUL;
- }
-
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
- addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
-
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- shift = ((where & 3) << 3);
- mask = (0xffffffffU >> ((4 - size) << 3));
- *value = (cf >> shift) & mask;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
-{
- if (!pci_is_root_bus(bus))
- return pci_conf1_read_config(bus, devfn, where, size, value);
-
- return pci_conf0_read_config(bus, devfn, where, size, value);
-}
-
-static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
- struct bridge_regs *bridge = bc->base;
- int slot = PCI_SLOT(devfn);
- int fn = PCI_FUNC(devfn);
- volatile void *addr;
- u32 cf, shift, mask, smask;
- int res;
-
- addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * IOC3 is broken beyond belief ... Don't even give the
- * generic PCI code a chance to look at it for real ...
- */
- if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
- goto is_ioc3;
-
- addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
-
- if (size == 1) {
- res = put_dbe(value, (u8 *) addr);
- } else if (size == 2) {
- res = put_dbe(value, (u16 *) addr);
- } else {
- res = put_dbe(value, (u32 *) addr);
- }
-
- if (res)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
- /*
- * IOC3 special handling
- */
- if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
- return PCIBIOS_SUCCESSFUL;
-
- addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- shift = ((where & 3) << 3);
- mask = (0xffffffffU >> ((4 - size) << 3));
- smask = mask << shift;
-
- cf = (cf & ~smask) | ((value & mask) << shift);
- if (put_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
- struct bridge_regs *bridge = bc->base;
- int slot = PCI_SLOT(devfn);
- int fn = PCI_FUNC(devfn);
- int busno = bus->number;
- volatile void *addr;
- u32 cf, shift, mask, smask;
- int res;
-
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
- addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * IOC3 is broken beyond belief ... Don't even give the
- * generic PCI code a chance to look at it for real ...
- */
- if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
- goto is_ioc3;
-
- addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
-
- if (size == 1) {
- res = put_dbe(value, (u8 *) addr);
- } else if (size == 2) {
- res = put_dbe(value, (u16 *) addr);
- } else {
- res = put_dbe(value, (u32 *) addr);
- }
-
- if (res)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
- /*
- * IOC3 special handling
- */
- if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
- return PCIBIOS_SUCCESSFUL;
-
- addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
- if (get_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- shift = ((where & 3) << 3);
- mask = (0xffffffffU >> ((4 - size) << 3));
- smask = mask << shift;
-
- cf = (cf & ~smask) | ((value & mask) << shift);
- if (put_dbe(cf, (u32 *) addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- if (!pci_is_root_bus(bus))
- return pci_conf1_write_config(bus, devfn, where, size, value);
-
- return pci_conf0_write_config(bus, devfn, where, size, value);
-}
-
-struct pci_ops bridge_pci_ops = {
- .read = pci_read_config,
- .write = pci_write_config,
-};
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 3c177b4d0609..441eb9383b20 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -7,162 +7,7 @@
* Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/dma-direct.h>
-#include <asm/sn/arch.h>
#include <asm/pci/bridge.h>
-#include <asm/paccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Max #PCI busses we can handle; ie, max #PCI bridges.
- */
-#define MAX_PCI_BUSSES 40
-
-/*
- * XXX: No kmalloc available when we do our crosstalk scan,
- * we should try to move it later in the boot process.
- */
-static struct bridge_controller bridges[MAX_PCI_BUSSES];
-
-extern struct pci_ops bridge_pci_ops;
-
-int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
-{
- unsigned long offset = NODE_OFFSET(nasid);
- struct bridge_controller *bc;
- static int num_bridges = 0;
- int slot;
-
- pci_set_flags(PCI_PROBE_ONLY);
-
- printk("a bridge\n");
-
- /* XXX: kludge alert.. */
- if (!num_bridges)
- ioport_resource.end = ~0UL;
-
- bc = &bridges[num_bridges];
-
- bc->pc.pci_ops = &bridge_pci_ops;
- bc->pc.mem_resource = &bc->mem;
- bc->pc.io_resource = &bc->io;
-
- bc->pc.index = num_bridges;
-
- bc->mem.name = "Bridge PCI MEM";
- bc->pc.mem_offset = offset;
- bc->mem.start = 0;
- bc->mem.end = ~0UL;
- bc->mem.flags = IORESOURCE_MEM;
-
- bc->io.name = "Bridge IO MEM";
- bc->pc.io_offset = offset;
- bc->io.start = 0UL;
- bc->io.end = ~0UL;
- bc->io.flags = IORESOURCE_IO;
-
- bc->widget_id = widget_id;
- bc->nasid = nasid;
-
- bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR;
-
- /*
- * point to this bridge
- */
- bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id);
-
- /*
- * Clear all pending interrupts.
- */
- bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
-
- /*
- * Until otherwise set up, assume all interrupts are from slot 0
- */
- bridge_write(bc, b_int_device, 0x0);
-
- /*
- * swap pio's to pci mem and io space (big windows)
- */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP |
- BRIDGE_CTRL_MEM_SWAP);
-#ifdef CONFIG_PAGE_SIZE_4KB
- bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#else /* 16kB or larger */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#endif
-
- /*
- * Hmm... IRIX sets additional bits in the address which
- * are documented as reserved in the bridge docs.
- */
- bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16));
- bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
- bridge_write(bc, b_dir_map, (masterwid << 20)); /* DMA */
- bridge_write(bc, b_int_enable, 0);
-
- for (slot = 0; slot < 8; slot ++) {
- bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
- bc->pci_int[slot] = -1;
- }
- bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
-
- register_pci_controller(&bc->pc);
-
- num_bridges++;
-
- return 0;
-}
-
-/*
- * All observed requests have pin == 1. We could have a global here, that
- * gets incremented and returned every time - unfortunately, pci_map_irq
- * may be called on the same device over and over, and need to return the
- * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
- *
- * A given PCI device, in general, should be able to intr any of the cpus
- * on any one of the hubs connected to its xbow.
- */
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return 0;
-}
-
-static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
-{
- while (dev->bus->parent) {
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- }
-
- return dev;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct pci_dev *rdev = bridge_root_dev(dev);
- int slot = PCI_SLOT(rdev->devfn);
- int irq;
-
- irq = bc->pci_int[slot];
- if (irq == -1) {
- irq = request_bridge_irq(bc, slot);
- if (irq < 0)
- return irq;
-
- bc->pci_int[slot] = irq;
- }
- dev->irq = irq;
-
- return 0;
-}
dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
{
@@ -177,29 +22,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
return dma_addr & ~(0xffUL << 56);
}
-/*
- * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
- * to find the slot number in sense of the bridge device register.
- * XXX This also means multiple devices might rely on conflicting bridge
- * settings.
- */
-
-static inline void pci_disable_swapping(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct bridge_regs *bridge = bc->base;
- int slot = PCI_SLOT(dev->devfn);
-
- /* Turn off byte swapping */
- bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
- bridge->b_widget.w_tflush; /* Flush */
-}
-
-static void pci_fixup_ioc3(struct pci_dev *d)
-{
- pci_disable_swapping(d);
-}
-
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
@@ -209,6 +31,3 @@ int pcibus_to_node(struct pci_bus *bus)
}
EXPORT_SYMBOL(pcibus_to_node);
#endif /* CONFIG_NUMA */
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
- pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
new file mode 100644
index 000000000000..bcf7f559789a
--- /dev/null
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
+ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/dma-direct.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
+
+#include <asm/pci/bridge.h>
+#include <asm/paccess.h>
+#include <asm/sn/irq_alloc.h>
+
+/*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+ if (size == 1 && where == 0x3d)
+ return 0x01;
+ else if (size == 2 && where == 0x3c)
+ return 0x0100;
+ else if (size == 4 && where == 0x3c)
+ return 0x00000100;
+
+ return 0;
+}
+
+static void bridge_disable_swapping(struct pci_dev *dev)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ int slot = PCI_SLOT(dev->devfn);
+
+ /* Turn off byte swapping */
+ bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+ bridge_read(bc, b_widget.w_tflush); /* Flush */
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+ bridge_disable_swapping);
+
+
+/*
+ * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
+ * not really documented, so right now I can't write code which uses it.
+ * Therefore we use type 0 accesses for now even though they won't work
+ * correctly for PCI-to-PCI bridges.
+ *
+ * The function is complicated by the ultimate brokenness of the IOC3 chip
+ * which is used in SGI systems. The IOC3 can only handle 32-bit PCI
+ * accesses and does only decode parts of it's address space.
+ */
+static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ struct bridge_regs *bridge = bc->base;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ void *addr;
+ u32 cf, shift, mask;
+ int res;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is broken beyond belief ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto is_ioc3;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
+
+ if (size == 1)
+ res = get_dbe(*value, (u8 *)addr);
+ else if (size == 2)
+ res = get_dbe(*value, (u16 *)addr);
+ else
+ res = get_dbe(*value, (u32 *)addr);
+
+ return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+
+is_ioc3:
+
+ /*
+ * IOC3 special handling
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
+ *value = emulate_ioc3_cfg(where, size);
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ *value = (cf >> shift) & mask;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ struct bridge_regs *bridge = bc->base;
+ int busno = bus->number;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ void *addr;
+ u32 cf, shift, mask;
+ int res;
+
+ bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is broken beyond belief ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto is_ioc3;
+
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+ if (size == 1)
+ res = get_dbe(*value, (u8 *)addr);
+ else if (size == 2)
+ res = get_dbe(*value, (u16 *)addr);
+ else
+ res = get_dbe(*value, (u32 *)addr);
+
+ return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+
+is_ioc3:
+
+ /*
+ * IOC3 special handling
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
+ *value = emulate_ioc3_cfg(where, size);
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ *value = (cf >> shift) & mask;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ if (!pci_is_root_bus(bus))
+ return pci_conf1_read_config(bus, devfn, where, size, value);
+
+ return pci_conf0_read_config(bus, devfn, where, size, value);
+}
+
+static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ struct bridge_regs *bridge = bc->base;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ void *addr;
+ u32 cf, shift, mask, smask;
+ int res;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is broken beyond belief ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto is_ioc3;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
+
+ if (size == 1)
+ res = put_dbe(value, (u8 *)addr);
+ else if (size == 2)
+ res = put_dbe(value, (u16 *)addr);
+ else
+ res = put_dbe(value, (u32 *)addr);
+
+ if (res)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+
+is_ioc3:
+
+ /*
+ * IOC3 special handling
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
+ return PCIBIOS_SUCCESSFUL;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ smask = mask << shift;
+
+ cf = (cf & ~smask) | ((value & mask) << shift);
+ if (put_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ struct bridge_regs *bridge = bc->base;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ int busno = bus->number;
+ void *addr;
+ u32 cf, shift, mask, smask;
+ int res;
+
+ bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is broken beyond belief ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto is_ioc3;
+
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+ if (size == 1)
+ res = put_dbe(value, (u8 *)addr);
+ else if (size == 2)
+ res = put_dbe(value, (u16 *)addr);
+ else
+ res = put_dbe(value, (u32 *)addr);
+
+ if (res)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+
+is_ioc3:
+
+ /*
+ * IOC3 special handling
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
+ return PCIBIOS_SUCCESSFUL;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+ if (get_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ smask = mask << shift;
+
+ cf = (cf & ~smask) | ((value & mask) << shift);
+ if (put_dbe(cf, (u32 *)addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ if (!pci_is_root_bus(bus))
+ return pci_conf1_write_config(bus, devfn, where, size, value);
+
+ return pci_conf0_write_config(bus, devfn, where, size, value);
+}
+
+static struct pci_ops bridge_pci_ops = {
+ .read = pci_read_config,
+ .write = pci_write_config,
+};
+
+struct bridge_irq_chip_data {
+ struct bridge_controller *bc;
+ nasid_t nasid;
+};
+
+static int bridge_set_affinity(struct irq_data *d, const struct cpumask *mask,
+ bool force)
+{
+#ifdef CONFIG_NUMA
+ struct bridge_irq_chip_data *data = d->chip_data;
+ int bit = d->parent_data->hwirq;
+ int pin = d->hwirq;
+ nasid_t nasid;
+ int ret, cpu;
+
+ ret = irq_chip_set_affinity_parent(d, mask, force);
+ if (ret >= 0) {
+ cpu = cpumask_first_and(mask, cpu_online_mask);
+ nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+ bridge_write(data->bc, b_int_addr[pin].addr,
+ (((data->bc->intr_addr >> 30) & 0x30000) |
+ bit | (nasid << 8)));
+ bridge_read(data->bc, b_wid_tflush);
+ }
+ return ret;
+#else
+ return irq_chip_set_affinity_parent(d, mask, force);
+#endif
+}
+
+struct irq_chip bridge_irq_chip = {
+ .name = "BRIDGE",
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_set_affinity = bridge_set_affinity
+};
+
+static int bridge_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ struct bridge_irq_chip_data *data;
+ struct irq_alloc_info *info = arg;
+ int ret;
+
+ if (nr_irqs > 1 || !info)
+ return -EINVAL;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+ if (ret >= 0) {
+ data->bc = info->ctrl;
+ data->nasid = info->nasid;
+ irq_domain_set_info(domain, virq, info->pin, &bridge_irq_chip,
+ data, handle_level_irq, NULL, NULL);
+ } else {
+ kfree(data);
+ }
+
+ return ret;
+}
+
+static void bridge_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *irqd = irq_domain_get_irq_data(domain, virq);
+
+ if (nr_irqs)
+ return;
+
+ kfree(irqd->chip_data);
+ irq_domain_free_irqs_top(domain, virq, nr_irqs);
+}
+
+static int bridge_domain_activate(struct irq_domain *domain,
+ struct irq_data *irqd, bool reserve)
+{
+ struct bridge_irq_chip_data *data = irqd->chip_data;
+ struct bridge_controller *bc = data->bc;
+ int bit = irqd->parent_data->hwirq;
+ int pin = irqd->hwirq;
+ u32 device;
+
+ bridge_write(bc, b_int_addr[pin].addr,
+ (((bc->intr_addr >> 30) & 0x30000) |
+ bit | (data->nasid << 8)));
+ bridge_set(bc, b_int_enable, (1 << pin));
+ bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
+
+ /*
+ * Enable sending of an interrupt clear packt to the hub on a high to
+ * low transition of the interrupt pin.
+ *
+ * IRIX sets additional bits in the address which are documented as
+ * reserved in the bridge docs.
+ */
+ bridge_set(bc, b_int_mode, (1UL << pin));
+
+ /*
+ * We assume the bridge to have a 1:1 mapping between devices
+ * (slots) and intr pins.
+ */
+ device = bridge_read(bc, b_int_device);
+ device &= ~(7 << (pin*3));
+ device |= (pin << (pin*3));
+ bridge_write(bc, b_int_device, device);
+
+ bridge_read(bc, b_wid_tflush);
+ return 0;
+}
+
+static void bridge_domain_deactivate(struct irq_domain *domain,
+ struct irq_data *irqd)
+{
+ struct bridge_irq_chip_data *data = irqd->chip_data;
+
+ bridge_clr(data->bc, b_int_enable, (1 << irqd->hwirq));
+ bridge_read(data->bc, b_wid_tflush);
+}
+
+static const struct irq_domain_ops bridge_domain_ops = {
+ .alloc = bridge_domain_alloc,
+ .free = bridge_domain_free,
+ .activate = bridge_domain_activate,
+ .deactivate = bridge_domain_deactivate
+};
+
+/*
+ * All observed requests have pin == 1. We could have a global here, that
+ * gets incremented and returned every time - unfortunately, pci_map_irq
+ * may be called on the same device over and over, and need to return the
+ * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
+ *
+ * A given PCI device, in general, should be able to intr any of the cpus
+ * on any one of the hubs connected to its xbow.
+ */
+static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ struct irq_alloc_info info;
+ int irq;
+
+ irq = bc->pci_int[slot];
+ if (irq == -1) {
+ info.ctrl = bc;
+ info.nasid = bc->nasid;
+ info.pin = slot;
+
+ irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info);
+ if (irq < 0)
+ return irq;
+
+ bc->pci_int[slot] = irq;
+ }
+ return irq;
+}
+
+static int bridge_probe(struct platform_device *pdev)
+{
+ struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct bridge_controller *bc;
+ struct pci_host_bridge *host;
+ struct irq_domain *domain, *parent;
+ struct fwnode_handle *fn;
+ int slot;
+ int err;
+
+ parent = irq_get_default_host();
+ if (!parent)
+ return -ENODEV;
+ fn = irq_domain_alloc_named_fwnode("BRIDGE");
+ if (!fn)
+ return -ENOMEM;
+ domain = irq_domain_create_hierarchy(parent, 0, 8, fn,
+ &bridge_domain_ops, NULL);
+ irq_domain_free_fwnode(fn);
+ if (!domain)
+ return -ENOMEM;
+
+ pci_set_flags(PCI_PROBE_ONLY);
+
+ host = devm_pci_alloc_host_bridge(dev, sizeof(*bc));
+ if (!host) {
+ err = -ENOMEM;
+ goto err_remove_domain;
+ }
+
+ bc = pci_host_bridge_priv(host);
+
+ bc->busn.name = "Bridge PCI busn";
+ bc->busn.start = 0;
+ bc->busn.end = 0xff;
+ bc->busn.flags = IORESOURCE_BUS;
+
+ bc->domain = domain;
+
+ pci_add_resource_offset(&host->windows, &bd->mem, bd->mem_offset);
+ pci_add_resource_offset(&host->windows, &bd->io, bd->io_offset);
+ pci_add_resource(&host->windows, &bc->busn);
+
+ err = devm_request_pci_bus_resources(dev, &host->windows);
+ if (err < 0)
+ goto err_free_resource;
+
+ bc->nasid = bd->nasid;
+
+ bc->baddr = (u64)bd->masterwid << 60 | PCI64_ATTR_BAR;
+ bc->base = (struct bridge_regs *)bd->bridge_addr;
+ bc->intr_addr = bd->intr_addr;
+
+ /*
+ * Clear all pending interrupts.
+ */
+ bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
+
+ /*
+ * Until otherwise set up, assume all interrupts are from slot 0
+ */
+ bridge_write(bc, b_int_device, 0x0);
+
+ /*
+ * disable swapping for big windows
+ */
+ bridge_clr(bc, b_wid_control,
+ BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP);
+#ifdef CONFIG_PAGE_SIZE_4KB
+ bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#else /* 16kB or larger */
+ bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#endif
+
+ /*
+ * Hmm... IRIX sets additional bits in the address which
+ * are documented as reserved in the bridge docs.
+ */
+ bridge_write(bc, b_wid_int_upper,
+ ((bc->intr_addr >> 32) & 0xffff) | (bd->masterwid << 16));
+ bridge_write(bc, b_wid_int_lower, bc->intr_addr & 0xffffffff);
+ bridge_write(bc, b_dir_map, (bd->masterwid << 20)); /* DMA */
+ bridge_write(bc, b_int_enable, 0);
+
+ for (slot = 0; slot < 8; slot++) {
+ bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+ bc->pci_int[slot] = -1;
+ }
+ bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
+
+ host->dev.parent = dev;
+ host->sysdata = bc;
+ host->busnr = 0;
+ host->ops = &bridge_pci_ops;
+ host->map_irq = bridge_map_irq;
+ host->swizzle_irq = pci_common_swizzle;
+
+ err = pci_scan_root_bus_bridge(host);
+ if (err < 0)
+ goto err_free_resource;
+
+ pci_bus_claim_resources(host->bus);
+ pci_bus_add_devices(host->bus);
+
+ platform_set_drvdata(pdev, host->bus);
+
+ return 0;
+
+err_free_resource:
+ pci_free_resource_list(&host->windows);
+err_remove_domain:
+ irq_domain_remove(domain);
+ return err;
+}
+
+static int bridge_remove(struct platform_device *pdev)
+{
+ struct pci_bus *bus = platform_get_drvdata(pdev);
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+
+ irq_domain_remove(bc->domain);
+ pci_lock_rescan_remove();
+ pci_stop_root_bus(bus);
+ pci_remove_root_bus(bus);
+ pci_unlock_rescan_remove();
+
+ return 0;
+}
+
+static struct platform_driver bridge_driver = {
+ .probe = bridge_probe,
+ .remove = bridge_remove,
+ .driver = {
+ .name = "xtalk-bridge",
+ }
+};
+
+builtin_platform_driver(bridge_driver);
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 37ad26716579..0b2002e02a47 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -3,6 +3,7 @@
#include <linux/if_ether.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <asm/paccess.h>
#include <asm/sgi/ip22.h>
@@ -25,6 +26,8 @@ static struct sgiwd93_platform_data sgiwd93_0_pd = {
.irq = SGI_WD93_0_IRQ,
};
+static u64 sgiwd93_0_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device sgiwd93_0_device = {
.name = "sgiwd93",
.id = 0,
@@ -32,6 +35,8 @@ static struct platform_device sgiwd93_0_device = {
.resource = sgiwd93_0_resources,
.dev = {
.platform_data = &sgiwd93_0_pd,
+ .dma_mask = &sgiwd93_0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
@@ -49,6 +54,8 @@ static struct sgiwd93_platform_data sgiwd93_1_pd = {
.irq = SGI_WD93_1_IRQ,
};
+static u64 sgiwd93_1_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device sgiwd93_1_device = {
.name = "sgiwd93",
.id = 1,
@@ -56,6 +63,8 @@ static struct platform_device sgiwd93_1_device = {
.resource = sgiwd93_1_resources,
.dev = {
.platform_data = &sgiwd93_1_pd,
+ .dma_mask = &sgiwd93_1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
@@ -96,6 +105,8 @@ static struct resource sgiseeq_0_resources[] = {
static struct sgiseeq_platform_data eth0_pd;
+static u64 sgiseeq_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device eth0_device = {
.name = "sgiseeq",
.id = 0,
@@ -103,6 +114,8 @@ static struct platform_device eth0_device = {
.resource = sgiseeq_0_resources,
.dev = {
.platform_data = &eth0_pd,
+ .dma_mask = &sgiseeq_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 6074efeff894..066b33f50bcc 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -184,5 +184,7 @@ void __init plat_mem_setup(void)
ioc3_eth_init();
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0UL;
set_io_port_base(IO_BASE);
}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index a32f843cdbe0..37be04975831 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -12,22 +12,20 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
+#include <linux/sched.h>
#include <asm/io.h>
#include <asm/irq_cpu.h>
-#include <asm/pci/bridge.h>
#include <asm/sn/addrs.h>
#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
+#include <asm/sn/irq_alloc.h>
struct hub_irq_data {
- struct bridge_controller *bc;
u64 *irq_mask[2];
cpuid_t cpu;
- int bit;
- int pin;
};
static DECLARE_BITMAP(hub_irq_map, IP27_HUB_IRQ_COUNT);
@@ -54,7 +52,7 @@ static void enable_hub_irq(struct irq_data *d)
struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
- set_bit(hd->bit, mask);
+ set_bit(d->hwirq, mask);
__raw_writeq(mask[0], hd->irq_mask[0]);
__raw_writeq(mask[1], hd->irq_mask[1]);
}
@@ -64,71 +62,11 @@ static void disable_hub_irq(struct irq_data *d)
struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
- clear_bit(hd->bit, mask);
+ clear_bit(d->hwirq, mask);
__raw_writeq(mask[0], hd->irq_mask[0]);
__raw_writeq(mask[1], hd->irq_mask[1]);
}
-static unsigned int startup_bridge_irq(struct irq_data *d)
-{
- struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
- struct bridge_controller *bc;
- nasid_t nasid;
- u32 device;
- int pin;
-
- if (!hd)
- return -EINVAL;
-
- pin = hd->pin;
- bc = hd->bc;
-
- nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(hd->cpu));
- bridge_write(bc, b_int_addr[pin].addr,
- (0x20000 | hd->bit | (nasid << 8)));
- bridge_set(bc, b_int_enable, (1 << pin));
- bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
-
- /*
- * Enable sending of an interrupt clear packt to the hub on a high to
- * low transition of the interrupt pin.
- *
- * IRIX sets additional bits in the address which are documented as
- * reserved in the bridge docs.
- */
- bridge_set(bc, b_int_mode, (1UL << pin));
-
- /*
- * We assume the bridge to have a 1:1 mapping between devices
- * (slots) and intr pins.
- */
- device = bridge_read(bc, b_int_device);
- device &= ~(7 << (pin*3));
- device |= (pin << (pin*3));
- bridge_write(bc, b_int_device, device);
-
- bridge_read(bc, b_wid_tflush);
-
- enable_hub_irq(d);
-
- return 0; /* Never anything pending. */
-}
-
-static void shutdown_bridge_irq(struct irq_data *d)
-{
- struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
- struct bridge_controller *bc;
-
- if (!hd)
- return;
-
- disable_hub_irq(d);
-
- bc = hd->bc;
- bridge_clr(bc, b_int_enable, (1 << hd->pin));
- bridge_read(bc, b_wid_tflush);
-}
-
static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask)
{
nasid_t nasid;
@@ -144,9 +82,6 @@ static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask)
hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_B);
hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_B);
}
-
- /* Make sure it's not already pending when we connect it. */
- REMOTE_HUB_CLR_INTR(nasid, hd->bit);
}
static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
@@ -163,7 +98,7 @@ static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
setup_hub_mask(hd, mask);
if (irqd_is_started(d))
- startup_bridge_irq(d);
+ enable_hub_irq(d);
irq_data_update_effective_affinity(d, cpumask_of(hd->cpu));
@@ -172,20 +107,22 @@ static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
static struct irq_chip hub_irq_type = {
.name = "HUB",
- .irq_startup = startup_bridge_irq,
- .irq_shutdown = shutdown_bridge_irq,
.irq_mask = disable_hub_irq,
.irq_unmask = enable_hub_irq,
.irq_set_affinity = set_affinity_hub_irq,
};
-int request_bridge_irq(struct bridge_controller *bc, int pin)
+static int hub_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
{
+ struct irq_alloc_info *info = arg;
struct hub_irq_data *hd;
struct hub_data *hub;
struct irq_desc *desc;
int swlevel;
- int irq;
+
+ if (nr_irqs > 1 || !info)
+ return -EINVAL;
hd = kzalloc(sizeof(*hd), GFP_KERNEL);
if (!hd)
@@ -196,46 +133,41 @@ int request_bridge_irq(struct bridge_controller *bc, int pin)
kfree(hd);
return -EAGAIN;
}
- irq = swlevel + IP27_HUB_IRQ_BASE;
-
- hd->bc = bc;
- hd->bit = swlevel;
- hd->pin = pin;
- irq_set_chip_data(irq, hd);
+ irq_domain_set_info(domain, virq, swlevel, &hub_irq_type, hd,
+ handle_level_irq, NULL, NULL);
/* use CPU connected to nearest hub */
- hub = hub_data(NASID_TO_COMPACT_NODEID(bc->nasid));
+ hub = hub_data(NASID_TO_COMPACT_NODEID(info->nasid));
setup_hub_mask(hd, &hub->h_cpus);
- desc = irq_to_desc(irq);
- desc->irq_common_data.node = bc->nasid;
+ /* Make sure it's not already pending when we connect it. */
+ REMOTE_HUB_CLR_INTR(info->nasid, swlevel);
+
+ desc = irq_to_desc(virq);
+ desc->irq_common_data.node = info->nasid;
cpumask_copy(desc->irq_common_data.affinity, &hub->h_cpus);
- return irq;
+ return 0;
}
-void ip27_hub_irq_init(void)
+static void hub_domain_free(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs)
{
- int i;
+ struct irq_data *irqd;
- for (i = IP27_HUB_IRQ_BASE;
- i < (IP27_HUB_IRQ_BASE + IP27_HUB_IRQ_COUNT); i++)
- irq_set_chip_and_handler(i, &hub_irq_type, handle_level_irq);
-
- /*
- * Some interrupts are reserved by hardware or by software convention.
- * Mark these as reserved right away so they won't be used accidentally
- * later.
- */
- for (i = 0; i <= BASE_PCI_IRQ; i++)
- set_bit(i, hub_irq_map);
-
- set_bit(IP_PEND0_6_63, hub_irq_map);
+ if (nr_irqs > 1)
+ return;
- for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
- set_bit(i, hub_irq_map);
+ irqd = irq_domain_get_irq_data(domain, virq);
+ if (irqd && irqd->chip_data)
+ kfree(irqd->chip_data);
}
+static const struct irq_domain_ops hub_domain_ops = {
+ .alloc = hub_domain_alloc,
+ .free = hub_domain_free,
+};
+
/*
* This code is unnecessarily complex, because we do
* intr enabling. Basically, once we grab the set of intrs we need
@@ -252,7 +184,9 @@ static void ip27_do_irq_mask0(struct irq_desc *desc)
{
cpuid_t cpu = smp_processor_id();
unsigned long *mask = per_cpu(irq_enable_mask, cpu);
+ struct irq_domain *domain;
u64 pend0;
+ int irq;
/* copied from Irix intpend0() */
pend0 = LOCAL_HUB_L(PI_INT_PEND0);
@@ -276,7 +210,14 @@ static void ip27_do_irq_mask0(struct irq_desc *desc)
generic_smp_call_function_interrupt();
} else
#endif
- generic_handle_irq(__ffs(pend0) + IP27_HUB_IRQ_BASE);
+ {
+ domain = irq_desc_get_handler_data(desc);
+ irq = irq_linear_revmap(domain, __ffs(pend0));
+ if (irq)
+ generic_handle_irq(irq);
+ else
+ spurious_interrupt();
+ }
LOCAL_HUB_L(PI_INT_PEND0);
}
@@ -285,7 +226,9 @@ static void ip27_do_irq_mask1(struct irq_desc *desc)
{
cpuid_t cpu = smp_processor_id();
unsigned long *mask = per_cpu(irq_enable_mask, cpu);
+ struct irq_domain *domain;
u64 pend1;
+ int irq;
/* copied from Irix intpend0() */
pend1 = LOCAL_HUB_L(PI_INT_PEND1);
@@ -294,7 +237,12 @@ static void ip27_do_irq_mask1(struct irq_desc *desc)
if (!pend1)
return;
- generic_handle_irq(__ffs(pend1) + IP27_HUB_IRQ_BASE + 64);
+ domain = irq_desc_get_handler_data(desc);
+ irq = irq_linear_revmap(domain, __ffs(pend1) + 64);
+ if (irq)
+ generic_handle_irq(irq);
+ else
+ spurious_interrupt();
LOCAL_HUB_L(PI_INT_PEND1);
}
@@ -325,11 +273,41 @@ void install_ipi(void)
void __init arch_init_irq(void)
{
+ struct irq_domain *domain;
+ struct fwnode_handle *fn;
+ int i;
+
mips_cpu_irq_init();
- ip27_hub_irq_init();
+
+ /*
+ * Some interrupts are reserved by hardware or by software convention.
+ * Mark these as reserved right away so they won't be used accidentally
+ * later.
+ */
+ for (i = 0; i <= BASE_PCI_IRQ; i++)
+ set_bit(i, hub_irq_map);
+
+ set_bit(IP_PEND0_6_63, hub_irq_map);
+
+ for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
+ set_bit(i, hub_irq_map);
+
+ fn = irq_domain_alloc_named_fwnode("HUB");
+ WARN_ON(fn == NULL);
+ if (!fn)
+ return;
+ domain = irq_domain_create_linear(fn, IP27_HUB_IRQ_COUNT,
+ &hub_domain_ops, NULL);
+ WARN_ON(domain == NULL);
+ if (!domain)
+ return;
+
+ irq_set_default_host(domain);
irq_set_percpu_devid(IP27_HUB_PEND0_IRQ);
- irq_set_chained_handler(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0);
+ irq_set_chained_handler_and_data(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0,
+ domain);
irq_set_percpu_devid(IP27_HUB_PEND1_IRQ);
- irq_set_chained_handler(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1);
+ irq_set_chained_handler_and_data(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1,
+ domain);
}
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index ce06aaa115ae..bd5cb855c6e5 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -9,6 +9,9 @@
#include <linux/kernel.h>
#include <linux/smp.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
+#include <asm/sn/addrs.h>
#include <asm/sn/types.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/hub.h>
@@ -20,7 +23,48 @@
#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbow in Xbridge */
#define BASE_XBOW_PORT 8 /* Lowest external port */
-extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
+static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
+{
+ struct xtalk_bridge_platform_data *bd;
+ struct platform_device *pdev;
+ unsigned long offset;
+
+ bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+ if (!bd)
+ goto no_mem;
+ pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
+ if (!pdev) {
+ kfree(bd);
+ goto no_mem;
+ }
+
+ offset = NODE_OFFSET(nasid);
+
+ bd->bridge_addr = RAW_NODE_SWIN_BASE(nasid, widget);
+ bd->intr_addr = BIT_ULL(47) + 0x01800000 + PI_INT_PEND_MOD;
+ bd->nasid = nasid;
+ bd->masterwid = masterwid;
+
+ bd->mem.name = "Bridge PCI MEM";
+ bd->mem.start = offset + (widget << SWIN_SIZE_BITS);
+ bd->mem.end = bd->mem.start + SWIN_SIZE - 1;
+ bd->mem.flags = IORESOURCE_MEM;
+ bd->mem_offset = offset;
+
+ bd->io.name = "Bridge PCI IO";
+ bd->io.start = offset + (widget << SWIN_SIZE_BITS);
+ bd->io.end = bd->io.start + SWIN_SIZE - 1;
+ bd->io.flags = IORESOURCE_IO;
+ bd->io_offset = offset;
+
+ platform_device_add_data(pdev, bd, sizeof(*bd));
+ platform_device_add(pdev);
+ pr_info("xtalk:n%d/%x bridge widget\n", nasid, widget);
+ return;
+
+no_mem:
+ pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
+}
static int probe_one_port(nasid_t nasid, int widget, int masterwid)
{
@@ -31,13 +75,10 @@ static int probe_one_port(nasid_t nasid, int widget, int masterwid)
(RAW_NODE_SWIN_BASE(nasid, widget) + WIDGET_ID);
partnum = XWIDGET_PART_NUM(widget_id);
- printk(KERN_INFO "Cpu %d, Nasid 0x%x, widget 0x%x (partnum 0x%x) is ",
- smp_processor_id(), nasid, widget, partnum);
-
switch (partnum) {
case BRIDGE_WIDGET_PART_NUM:
case XBRIDGE_WIDGET_PART_NUM:
- bridge_probe(nasid, widget, masterwid);
+ bridge_platform_create(nasid, widget, masterwid);
break;
default:
break;
@@ -52,8 +93,6 @@ static int xbow_probe(nasid_t nasid)
klxbow_t *xbow_p;
unsigned masterwid, i;
- printk("is xbow\n");
-
/*
* found xbow, so may have multiple bridges
* need to probe xbow
@@ -117,19 +156,17 @@ static void xtalk_probe_node(cnodeid_t nid)
(RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
partnum = XWIDGET_PART_NUM(widget_id);
- printk(KERN_INFO "Cpu %d, Nasid 0x%x: partnum 0x%x is ",
- smp_processor_id(), nasid, partnum);
-
switch (partnum) {
case BRIDGE_WIDGET_PART_NUM:
- bridge_probe(nasid, 0x8, 0xa);
+ bridge_platform_create(nasid, 0x8, 0xa);
break;
case XBOW_WIDGET_PART_NUM:
case XXBOW_WIDGET_PART_NUM:
+ pr_info("xtalk:n%d/0 xbow widget\n", nasid);
xbow_probe(nasid);
break;
default:
- printk(" unknown widget??\n");
+ pr_info("xtalk:n%d/0 unknown widget (0x%x)\n", nasid, partnum);
break;
}
}
diff --git a/include/linux/platform_data/xtalk-bridge.h b/include/linux/platform_data/xtalk-bridge.h
new file mode 100644
index 000000000000..51e5001f2c05
--- /dev/null
+++ b/include/linux/platform_data/xtalk-bridge.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SGI PCI Xtalk Bridge
+ */
+
+#ifndef PLATFORM_DATA_XTALK_BRIDGE_H
+#define PLATFORM_DATA_XTALK_BRIDGE_H
+
+#include <asm/sn/types.h>
+
+struct xtalk_bridge_platform_data {
+ struct resource mem;
+ struct resource io;
+ unsigned long bridge_addr;
+ unsigned long intr_addr;
+ unsigned long mem_offset;
+ unsigned long io_offset;
+ nasid_t nasid;
+ int masterwid;
+};
+
+#endif /* PLATFORM_DATA_XTALK_BRIDGE_H */