summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c17
-rw-r--r--drivers/pci/pci.c22
-rw-r--r--drivers/pci/pcie/pme.c48
3 files changed, 52 insertions, 35 deletions
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 35676f5ec9bd..6a2365cd794e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -736,12 +736,25 @@ void pcie_clear_hotplug_events(struct controller *ctrl)
void pcie_enable_interrupt(struct controller *ctrl)
{
- pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_HPIE, PCI_EXP_SLTCTL_HPIE);
+ u16 mask;
+
+ mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE;
+ pcie_write_cmd(ctrl, mask, mask);
}
void pcie_disable_interrupt(struct controller *ctrl)
{
- pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_HPIE);
+ u16 mask;
+
+ /*
+ * Mask hot-plug interrupt to prevent it triggering immediately
+ * when the link goes inactive (we still get PME when any of the
+ * enabled events is detected). Same goes with Link Layer State
+ * changed event which generates PME immediately when the link goes
+ * inactive so mask it as well.
+ */
+ mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE;
+ pcie_write_cmd(ctrl, 0, mask);
}
/*
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 56b9db4c658e..bdb442004537 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2545,6 +2545,25 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev)
pm_runtime_put_sync(parent);
}
+static const struct dmi_system_id bridge_d3_blacklist[] = {
+#ifdef CONFIG_X86
+ {
+ /*
+ * Gigabyte X299 root port is not marked as hotplug capable
+ * which allows Linux to power manage it. However, this
+ * confuses the BIOS SMI handler so don't power manage root
+ * ports on that system.
+ */
+ .ident = "X299 DESIGNARE EX-CF",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"),
+ },
+ },
+#endif
+ { }
+};
+
/**
* pci_bridge_d3_possible - Is it possible to put the bridge into D3
* @bridge: Bridge to check
@@ -2590,6 +2609,9 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
if (bridge->is_hotplug_bridge)
return false;
+ if (dmi_check_system(bridge_d3_blacklist))
+ return false;
+
/*
* It should be safe to put PCIe ports from 2015 or newer
* to D3.
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 0dbcf429089f..54d593d10396 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -363,6 +363,16 @@ static bool pcie_pme_check_wakeup(struct pci_bus *bus)
return false;
}
+static void pcie_pme_disable_interrupt(struct pci_dev *port,
+ struct pcie_pme_service_data *data)
+{
+ spin_lock_irq(&data->lock);
+ pcie_pme_interrupt_enable(port, false);
+ pcie_clear_root_pme_status(port);
+ data->noirq = true;
+ spin_unlock_irq(&data->lock);
+}
+
/**
* pcie_pme_suspend - Suspend PCIe PME service device.
* @srv: PCIe service device to suspend.
@@ -387,11 +397,7 @@ static int pcie_pme_suspend(struct pcie_device *srv)
return 0;
}
- spin_lock_irq(&data->lock);
- pcie_pme_interrupt_enable(port, false);
- pcie_clear_root_pme_status(port);
- data->noirq = true;
- spin_unlock_irq(&data->lock);
+ pcie_pme_disable_interrupt(port, data);
synchronize_irq(srv->irq);
@@ -427,34 +433,12 @@ static int pcie_pme_resume(struct pcie_device *srv)
*/
static void pcie_pme_remove(struct pcie_device *srv)
{
- pcie_pme_suspend(srv);
- free_irq(srv->irq, srv);
- kfree(get_service_data(srv));
-}
-
-static int pcie_pme_runtime_suspend(struct pcie_device *srv)
-{
- struct pcie_pme_service_data *data = get_service_data(srv);
-
- spin_lock_irq(&data->lock);
- pcie_pme_interrupt_enable(srv->port, false);
- pcie_clear_root_pme_status(srv->port);
- data->noirq = true;
- spin_unlock_irq(&data->lock);
-
- return 0;
-}
-
-static int pcie_pme_runtime_resume(struct pcie_device *srv)
-{
struct pcie_pme_service_data *data = get_service_data(srv);
- spin_lock_irq(&data->lock);
- pcie_pme_interrupt_enable(srv->port, true);
- data->noirq = false;
- spin_unlock_irq(&data->lock);
-
- return 0;
+ pcie_pme_disable_interrupt(srv->port, data);
+ free_irq(srv->irq, srv);
+ cancel_work_sync(&data->work);
+ kfree(data);
}
static struct pcie_port_service_driver pcie_pme_driver = {
@@ -464,8 +448,6 @@ static struct pcie_port_service_driver pcie_pme_driver = {
.probe = pcie_pme_probe,
.suspend = pcie_pme_suspend,
- .runtime_suspend = pcie_pme_runtime_suspend,
- .runtime_resume = pcie_pme_runtime_resume,
.resume = pcie_pme_resume,
.remove = pcie_pme_remove,
};