summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c.txt4
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt66
-rw-r--r--drivers/i2c/busses/i2c-parport-light.c1
-rw-r--r--drivers/i2c/busses/i2c-parport.c1
-rw-r--r--drivers/i2c/busses/i2c-thunderx-pcidrv.c6
-rw-r--r--drivers/i2c/i2c-core-base.c9
-rw-r--r--drivers/i2c/i2c-core-smbus.c55
-rw-r--r--drivers/i2c/i2c-smbus.c81
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c95
-rw-r--r--drivers/power/supply/Kconfig14
-rw-r--r--drivers/power/supply/Makefile1
-rw-r--r--drivers/power/supply/sbs-battery.c35
-rw-r--r--drivers/power/supply/sbs-manager.c445
-rw-r--r--include/linux/i2c-smbus.h10
14 files changed, 675 insertions, 148 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index cee9d5055fa2..11263982470e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below.
interrupts used by the device.
- interrupt-names
- "irq" and "wakeup" names are recognized by I2C core, other names are
- left to individual drivers.
+ "irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+ other names are left to individual drivers.
- host-notify
device uses SMBus host notify protocol instead of interrupt line.
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
new file mode 100644
index 000000000000..4b2195571a49
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
@@ -0,0 +1,66 @@
+Binding for sbs-manager
+
+Required properties:
+- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
+ number compatible string might be used in order to take care of vendor
+ specific registers.
+- reg: integer, i2c address of the device. Should be <0xa>.
+Optional properties:
+- gpio-controller: Marks the port as GPIO controller.
+ See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
+ is used to specify optional parameters:
+ See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+
+From OS view the device is basically an i2c-mux used to communicate with up to
+four smart battery devices at address 0xb. The driver actually implements this
+behaviour. So standard i2c-mux nodes can be used to register up to four slave
+batteries. Channels will be numerated starting from 1 to 4.
+
+Example:
+
+batman@a {
+ compatible = "lltc,ltc1760", "sbs,sbs-manager";
+ reg = <0x0a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 1 1>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 2 1>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 3 1>;
+ };
+ };
+};
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index faa8fb8f2b8f..fa41ff799533 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -123,7 +123,6 @@ static struct i2c_adapter parport_adapter = {
/* SMBus alert support */
static struct i2c_smbus_alert_setup alert_data = {
- .alert_edge_triggered = 1,
};
static struct i2c_client *ara;
static struct lineop parport_ctrl_irq = {
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a8e54df4aed6..319209a07353 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -237,7 +237,6 @@ static void i2c_parport_attach(struct parport *port)
/* Setup SMBus alert if supported */
if (adapter_parm[type].smbus_alert) {
- adapter->alert_data.alert_edge_triggered = 1;
adapter->ara = i2c_setup_smbus_alert(&adapter->adapter,
&adapter->alert_data);
if (adapter->ara)
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index df0976f4432a..1a7cad874756 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -118,8 +118,6 @@ static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
struct device_node *node)
{
- u32 type;
-
if (!node)
return -EINVAL;
@@ -127,10 +125,6 @@ static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
if (!i2c->alert_data.irq)
return -EINVAL;
- type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq));
- i2c->alert_data.alert_edge_triggered =
- (type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0;
-
i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data);
if (!i2c->ara)
return -ENODEV;
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index db6558e5f657..7b08f3446bfc 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -29,6 +29,7 @@
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/idr.h>
#include <linux/init.h>
#include <linux/irqflags.h>
@@ -1269,6 +1270,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
goto out_list;
}
+ res = of_i2c_setup_smbus_alert(adap);
+ if (res)
+ goto out_reg;
+
dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
pm_runtime_no_callbacks(&adap->dev);
@@ -1300,6 +1305,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
return 0;
+out_reg:
+ init_completion(&adap->dev_released);
+ device_unregister(&adap->dev);
+ wait_for_completion(&adap->dev_released);
out_list:
mutex_lock(&core_lock);
idr_remove(&i2c_adapter_idr, adap->nr);
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index 10f00a82ec9d..4bb9927afd01 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -17,6 +17,7 @@
#include <linux/device.h>
#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#define CREATE_TRACE_POINTS
#include <trace/events/smbus.h>
@@ -592,3 +593,57 @@ s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
return i;
}
EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
+
+/**
+ * i2c_setup_smbus_alert - Setup SMBus alert support
+ * @adapter: the target adapter
+ * @setup: setup data for the SMBus alert handler
+ * Context: can sleep
+ *
+ * Setup handling of the SMBus alert protocol on a given I2C bus segment.
+ *
+ * Handling can be done either through our IRQ handler, or by the
+ * adapter (from its handler, periodic polling, or whatever).
+ *
+ * NOTE that if we manage the IRQ, we *MUST* know if it's level or
+ * edge triggered in order to hand it to the workqueue correctly.
+ * If triggering the alert seems to wedge the system, you probably
+ * should have said it's level triggered.
+ *
+ * This returns the ara client, which should be saved for later use with
+ * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL
+ * to indicate an error.
+ */
+struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
+ struct i2c_smbus_alert_setup *setup)
+{
+ struct i2c_board_info ara_board_info = {
+ I2C_BOARD_INFO("smbus_alert", 0x0c),
+ .platform_data = setup,
+ };
+
+ return i2c_new_device(adapter, &ara_board_info);
+}
+EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);
+
+#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
+int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
+{
+ struct i2c_client *client;
+ int irq;
+
+ irq = of_property_match_string(adapter->dev.of_node, "interrupt-names",
+ "smbus_alert");
+ if (irq == -EINVAL || irq == -ENODATA)
+ return 0;
+ else if (irq < 0)
+ return irq;
+
+ client = i2c_setup_smbus_alert(adapter, NULL);
+ if (!client)
+ return -ENODEV;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
+#endif
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index f9271c713d20..5a1dd7f13bac 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -21,12 +21,11 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
struct i2c_smbus_alert {
- unsigned int alert_edge_triggered:1;
- int irq;
struct work_struct alert;
struct i2c_client *ara; /* Alert response address */
};
@@ -72,13 +71,12 @@ static int smbus_do_alert(struct device *dev, void *addrp)
* The alert IRQ handler needs to hand work off to a task which can issue
* SMBus calls, because those sleeping calls can't be made in IRQ context.
*/
-static void smbus_alert(struct work_struct *work)
+static irqreturn_t smbus_alert(int irq, void *d)
{
- struct i2c_smbus_alert *alert;
+ struct i2c_smbus_alert *alert = d;
struct i2c_client *ara;
unsigned short prev_addr = 0; /* Not a valid address */
- alert = container_of(work, struct i2c_smbus_alert, alert);
ara = alert->ara;
for (;;) {
@@ -115,21 +113,17 @@ static void smbus_alert(struct work_struct *work)
prev_addr = data.addr;
}
- /* We handled all alerts; re-enable level-triggered IRQs */
- if (!alert->alert_edge_triggered)
- enable_irq(alert->irq);
+ return IRQ_HANDLED;
}
-static irqreturn_t smbalert_irq(int irq, void *d)
+static void smbalert_work(struct work_struct *work)
{
- struct i2c_smbus_alert *alert = d;
+ struct i2c_smbus_alert *alert;
- /* Disable level-triggered IRQs until we handle them */
- if (!alert->alert_edge_triggered)
- disable_irq_nosync(irq);
+ alert = container_of(work, struct i2c_smbus_alert, alert);
+
+ smbus_alert(0, alert);
- schedule_work(&alert->alert);
- return IRQ_HANDLED;
}
/* Setup SMBALERT# infrastructure */
@@ -139,28 +133,35 @@ static int smbalert_probe(struct i2c_client *ara,
struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
struct i2c_smbus_alert *alert;
struct i2c_adapter *adapter = ara->adapter;
- int res;
+ int res, irq;
alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert),
GFP_KERNEL);
if (!alert)
return -ENOMEM;
- alert->alert_edge_triggered = setup->alert_edge_triggered;
- alert->irq = setup->irq;
- INIT_WORK(&alert->alert, smbus_alert);
+ if (setup) {
+ irq = setup->irq;
+ } else {
+ irq = of_irq_get_byname(adapter->dev.of_node, "smbus_alert");
+ if (irq <= 0)
+ return irq;
+ }
+
+ INIT_WORK(&alert->alert, smbalert_work);
alert->ara = ara;
- if (setup->irq > 0) {
- res = devm_request_irq(&ara->dev, setup->irq, smbalert_irq,
- 0, "smbus_alert", alert);
+ if (irq > 0) {
+ res = devm_request_threaded_irq(&ara->dev, irq,
+ NULL, smbus_alert,
+ IRQF_SHARED | IRQF_ONESHOT,
+ "smbus_alert", alert);
if (res)
return res;
}
i2c_set_clientdata(ara, alert);
- dev_info(&adapter->dev, "supports SMBALERT#, %s trigger\n",
- setup->alert_edge_triggered ? "edge" : "level");
+ dev_info(&adapter->dev, "supports SMBALERT#\n");
return 0;
}
@@ -190,38 +191,6 @@ static struct i2c_driver smbalert_driver = {
};
/**
- * i2c_setup_smbus_alert - Setup SMBus alert support
- * @adapter: the target adapter
- * @setup: setup data for the SMBus alert handler
- * Context: can sleep
- *
- * Setup handling of the SMBus alert protocol on a given I2C bus segment.
- *
- * Handling can be done either through our IRQ handler, or by the
- * adapter (from its handler, periodic polling, or whatever).
- *
- * NOTE that if we manage the IRQ, we *MUST* know if it's level or
- * edge triggered in order to hand it to the workqueue correctly.
- * If triggering the alert seems to wedge the system, you probably
- * should have said it's level triggered.
- *
- * This returns the ara client, which should be saved for later use with
- * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL
- * to indicate an error.
- */
-struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
- struct i2c_smbus_alert_setup *setup)
-{
- struct i2c_board_info ara_board_info = {
- I2C_BOARD_INFO("smbus_alert", 0x0c),
- .platform_data = setup,
- };
-
- return i2c_new_device(adapter, &ara_board_info);
-}
-EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);
-
-/**
* i2c_handle_smbus_alert - Handle an SMBus alert
* @ara: the ARA client on the relevant adapter
* Context: can't sleep
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 7b992db38021..2ca068d8b92d 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -246,36 +246,6 @@ static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
return handled ? IRQ_HANDLED : IRQ_NONE;
}
-static void pca954x_irq_mask(struct irq_data *idata)
-{
- struct pca954x *data = irq_data_get_irq_chip_data(idata);
- unsigned int pos = idata->hwirq;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&data->lock, flags);
-
- data->irq_mask &= ~BIT(pos);
- if (!data->irq_mask)
- disable_irq(data->client->irq);
-
- raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
-static void pca954x_irq_unmask(struct irq_data *idata)
-{
- struct pca954x *data = irq_data_get_irq_chip_data(idata);
- unsigned int pos = idata->hwirq;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&data->lock, flags);
-
- if (!data->irq_mask)
- enable_irq(data->client->irq);
- data->irq_mask |= BIT(pos);
-
- raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
{
if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
@@ -285,8 +255,6 @@ static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
static struct irq_chip pca954x_irq_chip = {
.name = "i2c-mux-pca954x",
- .irq_mask = pca954x_irq_mask,
- .irq_unmask = pca954x_irq_unmask,
.irq_set_type = pca954x_irq_set_type,
};
@@ -294,7 +262,7 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
{
struct pca954x *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
- int c, err, irq;
+ int c, irq;
if (!data->chip->has_irq || client->irq <= 0)
return 0;
@@ -309,29 +277,31 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
for (c = 0; c < data->chip->nchans; c++) {
irq = irq_create_mapping(data->irq, c);
+ if (!irq) {
+ dev_err(&client->dev, "failed irq create map\n");
+ return -EINVAL;
+ }
irq_set_chip_data(irq, data);
irq_set_chip_and_handler(irq, &pca954x_irq_chip,
handle_simple_irq);
}
- err = devm_request_threaded_irq(&client->dev, data->client->irq, NULL,
- pca954x_irq_handler,
- IRQF_ONESHOT | IRQF_SHARED,
- "pca954x", data);
- if (err)
- goto err_req_irq;
+ return 0;
+}
- disable_irq(data->client->irq);
+static void pca954x_cleanup(struct i2c_mux_core *muxc)
+{
+ struct pca954x *data = i2c_mux_priv(muxc);
+ int c, irq;
- return 0;
-err_req_irq:
- for (c = 0; c < data->chip->nchans; c++) {
- irq = irq_find_mapping(data->irq, c);
- irq_dispose_mapping(irq);
+ if (data->irq) {
+ for (c = 0; c < data->chip->nchans; c++) {
+ irq = irq_find_mapping(data->irq, c);
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(data->irq);
}
- irq_domain_remove(data->irq);
-
- return err;
+ i2c_mux_del_adapters(muxc);
}
/*
@@ -391,7 +361,7 @@ static int pca954x_probe(struct i2c_client *client,
ret = pca954x_irq_setup(muxc);
if (ret)
- goto fail_del_adapters;
+ goto fail_cleanup;
/* Now create an adapter for each channel */
for (num = 0; num < data->chip->nchans; num++) {
@@ -414,7 +384,16 @@ static int pca954x_probe(struct i2c_client *client,
ret = i2c_mux_add_adapter(muxc, force, num, class);
if (ret)
- goto fail_del_adapters;
+ goto fail_cleanup;
+ }
+
+ if (data->irq) {
+ ret = devm_request_threaded_irq(&client->dev, data->client->irq,
+ NULL, pca954x_irq_handler,
+ IRQF_ONESHOT | IRQF_SHARED,
+ "pca954x", data);
+ if (ret)
+ goto fail_cleanup;
}
dev_info(&client->dev,
@@ -424,26 +403,16 @@ static int pca954x_probe(struct i2c_client *client,
return 0;
-fail_del_adapters:
- i2c_mux_del_adapters(muxc);
+fail_cleanup:
+ pca954x_cleanup(muxc);
return ret;
}
static int pca954x_remove(struct i2c_client *client)
{
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
- struct pca954x *data = i2c_mux_priv(muxc);
- int c, irq;
- if (data->irq) {
- for (c = 0; c < data->chip->nchans; c++) {
- irq = irq_find_mapping(data->irq, c);
- irq_dispose_mapping(irq);
- }
- irq_domain_remove(data->irq);
- }
-
- i2c_mux_del_adapters(muxc);
+ pca954x_cleanup(muxc);
return 0;
}
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 5ab90c1f3f7c..fbca0ba7fc52 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -184,6 +184,20 @@ config CHARGER_SBS
help
Say Y to include support for SBS compilant battery chargers.
+config MANAGER_SBS
+ tristate "Smart Battery System Manager"
+ depends on I2C && I2C_MUX && GPIOLIB
+ select I2C_SMBUS
+ help
+ Say Y here to include support for Smart Battery System Manager
+ ICs. The driver reports online and charging status via sysfs.
+ It presents itself also as I2C mux which allows to bind
+ smart battery driver to its ports.
+ Supported is for example LTC1760.
+
+ This driver can also be built as a module. If so, the module will be
+ called sbs-manager.
+
config BATTERY_BQ27XXX
tristate "BQ27xxx battery driver"
help
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 621a19058fec..3e8f49a17770 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
obj-$(CONFIG_CHARGER_SBS) += sbs-charger.o
+obj-$(CONFIG_MANAGER_SBS) += sbs-manager.o
obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o
obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
obj-$(CONFIG_BATTERY_BQ27XXX_HDQ) += bq27xxx_battery_hdq.o
diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index b19a73176910..83d7b4115857 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -177,10 +177,8 @@ static bool force_load;
static int sbs_read_word_data(struct i2c_client *client, u8 address)
{
struct sbs_info *chip = i2c_get_clientdata(client);
+ int retries = chip->i2c_retry_count;
s32 ret = 0;
- int retries = 1;
-
- retries = chip->i2c_retry_count;
while (retries > 0) {
ret = i2c_smbus_read_word_data(client, address);
@@ -204,7 +202,7 @@ static int sbs_read_string_data(struct i2c_client *client, u8 address,
{
struct sbs_info *chip = i2c_get_clientdata(client);
s32 ret = 0, block_length = 0;
- int retries_length = 1, retries_block = 1;
+ int retries_length, retries_block;
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
retries_length = chip->i2c_retry_count;
@@ -269,10 +267,8 @@ static int sbs_write_word_data(struct i2c_client *client, u8 address,
u16 value)
{
struct sbs_info *chip = i2c_get_clientdata(client);
+ int retries = chip->i2c_retry_count;
s32 ret = 0;
- int retries = 1;
-
- retries = chip->i2c_retry_count;
while (retries > 0) {
ret = i2c_smbus_write_word_data(client, address, value);
@@ -321,16 +317,6 @@ static int sbs_get_battery_presence_and_health(
union power_supply_propval *val)
{
s32 ret;
- struct sbs_info *chip = i2c_get_clientdata(client);
-
- if (psp == POWER_SUPPLY_PROP_PRESENT && chip->gpio_detect) {
- ret = gpiod_get_value_cansleep(chip->gpio_detect);
- if (ret < 0)
- return ret;
- val->intval = ret;
- chip->is_present = val->intval;
- return ret;
- }
/*
* Write to ManufacturerAccess with ManufacturerAccess command
@@ -570,7 +556,7 @@ static int sbs_get_battery_serial_number(struct i2c_client *client,
if (ret < 0)
return ret;
- ret = sprintf(sbs_serial, "%04x", ret);
+ sprintf(sbs_serial, "%04x", ret);
val->strval = sbs_serial;
return 0;
@@ -598,6 +584,19 @@ static int sbs_get_property(struct power_supply *psy,
struct sbs_info *chip = power_supply_get_drvdata(psy);
struct i2c_client *client = chip->client;
+ if (chip->gpio_detect) {
+ ret = gpiod_get_value_cansleep(chip->gpio_detect);
+ if (ret < 0)
+ return ret;
+ if (psp == POWER_SUPPLY_PROP_PRESENT) {
+ val->intval = ret;
+ chip->is_present = val->intval;
+ return 0;
+ }
+ if (ret == 0)
+ return -ENODATA;
+ }
+
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
case POWER_SUPPLY_PROP_HEALTH:
diff --git a/drivers/power/supply/sbs-manager.c b/drivers/power/supply/sbs-manager.c
new file mode 100644
index 000000000000..ccb4217b9638
--- /dev/null
+++ b/drivers/power/supply/sbs-manager.c
@@ -0,0 +1,445 @@
+/*
+ * Driver for SBS compliant Smart Battery System Managers
+ *
+ * The device communicates via i2c at address 0x0a and multiplexes access to up
+ * to four smart batteries at address 0x0b.
+ *
+ * Via sysfs interface the online state and charge type are presented.
+ *
+ * Datasheet SBSM: http://sbs-forum.org/specs/sbsm100b.pdf
+ * Datasheet LTC1760: http://cds.linear.com/docs/en/datasheet/1760fb.pdf
+ *
+ * Karl-Heinz Schneider <karl-heinz@schneider-inet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+
+#define SBSM_MAX_BATS 4
+#define SBSM_RETRY_CNT 3
+
+/* registers addresses */
+#define SBSM_CMD_BATSYSSTATE 0x01
+#define SBSM_CMD_BATSYSSTATECONT 0x02
+#define SBSM_CMD_BATSYSINFO 0x04
+#define SBSM_CMD_LTC 0x3c
+
+#define SBSM_MASK_BAT_SUPPORTED GENMASK(3, 0)
+#define SBSM_MASK_CHARGE_BAT GENMASK(7, 4)
+#define SBSM_BIT_AC_PRESENT BIT(0)
+#define SBSM_BIT_TURBO BIT(7)
+
+#define SBSM_SMB_BAT_OFFSET 11
+struct sbsm_data {
+ struct i2c_client *client;
+ struct i2c_mux_core *muxc;
+
+ struct power_supply *psy;
+
+ u8 cur_chan; /* currently selected channel */
+ struct gpio_chip chip;
+ bool is_ltc1760; /* special capabilities */
+
+ unsigned int supported_bats;
+ unsigned int last_state;
+ unsigned int last_state_cont;
+};
+
+static enum power_supply_property sbsm_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static int sbsm_read_word(struct i2c_client *client, u8 address)
+{
+ int reg, retries;
+
+ for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
+ reg = i2c_smbus_read_word_data(client, address);
+ if (reg >= 0)
+ break;
+ }
+
+ if (reg < 0) {
+ dev_err(&client->dev, "failed to read register 0x%02x\n",
+ address);
+ }
+
+ return reg;
+}
+
+static int sbsm_write_word(struct i2c_client *client, u8 address, u16 word)
+{
+ int ret, retries;
+
+ for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
+ ret = i2c_smbus_write_word_data(client, address, word);
+ if (ret >= 0)
+ break;
+ }
+ if (ret < 0)
+ dev_err(&client->dev, "failed to write to register 0x%02x\n",
+ address);
+
+ return ret;
+}
+
+static int sbsm_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sbsm_data *data = power_supply_get_drvdata(psy);
+ int regval = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATECONT);
+ if (regval < 0)
+ return regval;
+ val->intval = !!(regval & SBSM_BIT_AC_PRESENT);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
+ if (regval < 0)
+ return regval;
+
+ if ((regval & SBSM_MASK_CHARGE_BAT) == 0) {
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ return 0;
+ }
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+
+ if (data->is_ltc1760) {
+ /* charge mode fast if turbo is active */
+ regval = sbsm_read_word(data->client, SBSM_CMD_LTC);
+ if (regval < 0)
+ return regval;
+ else if (regval & SBSM_BIT_TURBO)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sbsm_prop_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ struct sbsm_data *data = power_supply_get_drvdata(psy);
+
+ return (psp == POWER_SUPPLY_PROP_CHARGE_TYPE) && data->is_ltc1760;
+}
+
+static int sbsm_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct sbsm_data *data = power_supply_get_drvdata(psy);
+ int ret = -EINVAL;
+ u16 regval;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ /* write 1 to TURBO if type fast is given */
+ if (!data->is_ltc1760)
+ break;
+ regval = val->intval ==
+ POWER_SUPPLY_CHARGE_TYPE_FAST ? SBSM_BIT_TURBO : 0;
+ ret = sbsm_write_word(data->client, SBSM_CMD_LTC, regval);
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Switch to battery
+ * Parameter chan is directly the content of SMB_BAT* nibble
+ */
+static int sbsm_select(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct sbsm_data *data = i2c_mux_priv(muxc);
+ struct device *dev = &data->client->dev;
+ int ret = 0;
+ u16 reg;
+
+ if (data->cur_chan == chan)
+ return ret;
+
+ /* chan goes from 1 ... 4 */
+ reg = 1 << BIT(SBSM_SMB_BAT_OFFSET + chan);
+ ret = sbsm_write_word(data->client, SBSM_CMD_BATSYSSTATE, reg);
+ if (ret)
+ dev_err(dev, "Failed to select channel %i\n", chan);
+ else
+ data->cur_chan = chan;
+
+ return ret;
+}
+
+static int sbsm_gpio_get_value(struct gpio_chip *gc, unsigned int off)
+{
+ struct sbsm_data *data = gpiochip_get_data(gc);
+ int ret;
+
+ ret = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
+ if (ret < 0)
+ return ret;
+
+ return ret & BIT(off);
+}
+
+/*
+ * This needs to be defined or the GPIO lib fails to register the pin.
+ * But the 'gpio' is always an input.
+ */
+static int sbsm_gpio_direction_input(struct gpio_chip *gc, unsigned int off)
+{
+ return 0;
+}
+
+static int sbsm_do_alert(struct device *dev, void *d)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+
+ if (!client || client->addr != 0x0b)
+ return 0;
+
+ device_lock(dev);
+ if (client->dev.driver) {
+ driver = to_i2c_driver(client->dev.driver);
+ if (driver->alert)
+ driver->alert(client, I2C_PROTOCOL_SMBUS_ALERT, 0);
+ else
+ dev_warn(&client->dev, "no driver alert()!\n");
+ } else {
+ dev_dbg(&client->dev, "alert with no driver\n");
+ }
+ device_unlock(dev);
+
+ return -EBUSY;
+}
+
+static void sbsm_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
+ unsigned int d)
+{
+ struct sbsm_data *sbsm = i2c_get_clientdata(client);
+
+ int ret, i, irq_bat = 0, state = 0;
+
+ ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATE);
+ if (ret >= 0) {
+ irq_bat = ret ^ sbsm->last_state;
+ sbsm->last_state = ret;
+ state = ret;
+ }
+
+ ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATECONT);
+ if ((ret >= 0) &&
+ ((ret ^ sbsm->last_state_cont) & SBSM_BIT_AC_PRESENT)) {
+ irq_bat |= sbsm->supported_bats & state;
+ power_supply_changed(sbsm->psy);
+ }
+ sbsm->last_state_cont = ret;
+
+ for (i = 0; i < SBSM_MAX_BATS; i++) {
+ if (irq_bat & BIT(i)) {
+ device_for_each_child(&sbsm->muxc->adapter[i]->dev,
+ NULL, sbsm_do_alert);
+ }
+ }
+}
+
+static int sbsm_gpio_setup(struct sbsm_data *data)
+{
+ struct gpio_chip *gc = &data->chip;
+ struct i2c_client *client = data->client;
+ struct device *dev = &client->dev;
+ int ret;
+
+ if (!device_property_present(dev, "gpio-controller"))
+ return 0;
+
+ ret = sbsm_read_word(client, SBSM_CMD_BATSYSSTATE);
+ if (ret < 0)
+ return ret;
+ data->last_state = ret;
+
+ ret = sbsm_read_word(client, SBSM_CMD_BATSYSSTATECONT);
+ if (ret < 0)
+ return ret;
+ data->last_state_cont = ret;
+
+ gc->get = sbsm_gpio_get_value;
+ gc->direction_input = sbsm_gpio_direction_input;
+ gc->can_sleep = true;
+ gc->base = -1;
+ gc->ngpio = SBSM_MAX_BATS;
+ gc->label = client->name;
+ gc->parent = dev;
+ gc->owner = THIS_MODULE;
+
+ ret = devm_gpiochip_add_data(dev, gc, data);
+ if (ret) {
+ dev_err(dev, "devm_gpiochip_add_data failed: %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static const struct power_supply_desc sbsm_default_psy_desc = {
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = sbsm_props,
+ .num_properties = ARRAY_SIZE(sbsm_props),
+ .get_property = &sbsm_get_property,
+ .set_property = &sbsm_set_property,
+ .property_is_writeable = &sbsm_prop_is_writeable,
+};
+
+static int sbsm_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct sbsm_data *data;
+ struct device *dev = &client->dev;
+ struct power_supply_desc *psy_desc;
+ struct power_supply_config psy_cfg = {};
+ int ret = 0, i;
+
+ /* Device listens only at address 0x0a */
+ if (client->addr != 0x0a)
+ return -EINVAL;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EPFNOSUPPORT;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+
+ data->client = client;
+ data->is_ltc1760 = !!strstr(id->name, "ltc1760");
+
+ ret = sbsm_read_word(client, SBSM_CMD_BATSYSINFO);
+ if (ret < 0)
+ return ret;
+ data->supported_bats = ret & SBSM_MASK_BAT_SUPPORTED;
+ data->muxc = i2c_mux_alloc(adapter, dev, SBSM_MAX_BATS, 0,
+ I2C_MUX_LOCKED, &sbsm_select, NULL);
+ if (!data->muxc) {
+ dev_err(dev, "failed to alloc i2c mux\n");
+ ret = -ENOMEM;
+ goto err_mux_alloc;
+ }
+ data->muxc->priv = data;
+
+ /* register muxed i2c channels. One for each supported battery */
+ for (i = 0; i < SBSM_MAX_BATS; ++i) {
+ if (data->supported_bats & BIT(i)) {
+ ret = i2c_mux_add_adapter(data->muxc, 0, i + 1, 0);
+ if (ret)
+ break;
+ }
+ }
+ if (ret) {
+ dev_err(dev, "failed to register i2c mux channel %d\n", i + 1);
+ goto err_mux_register;
+ }
+
+ psy_desc = devm_kmemdup(dev, &sbsm_default_psy_desc,
+ sizeof(struct power_supply_desc),
+ GFP_KERNEL);
+ if (!psy_desc) {
+ ret = -ENOMEM;
+ goto err_psy;
+ }
+
+ psy_desc->name = devm_kasprintf(dev, GFP_KERNEL, "sbsm-%s",
+ dev_name(&client->dev));
+ if (!psy_desc->name) {
+ ret = -ENOMEM;
+ goto err_psy;
+ }
+ ret = sbsm_gpio_setup(data);
+ if (ret < 0)
+ goto err_psy;
+
+ psy_cfg.drv_data = data;
+ psy_cfg.of_node = dev->of_node;
+ data->psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
+ if (IS_ERR(data->psy)) {
+ ret = PTR_ERR(data->psy);
+ dev_err(dev, "failed to register power supply %s\n",
+ psy_desc->name);
+ goto err_psy;
+ }
+
+ return 0;
+
+err_psy:
+err_mux_register:
+ i2c_mux_del_adapters(data->muxc);
+
+err_mux_alloc:
+ return ret;
+}
+
+static int sbsm_remove(struct i2c_client *client)
+{
+ struct sbsm_data *data = i2c_get_clientdata(client);
+
+ i2c_mux_del_adapters(data->muxc);
+ return 0;
+}
+
+static const struct i2c_device_id sbsm_ids[] = {
+ { "sbs-manager", 0 },
+ { "ltc1760", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sbsm_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sbsm_dt_ids[] = {
+ { .compatible = "sbs,sbs-manager" },
+ { .compatible = "lltc,ltc1760" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sbsm_dt_ids);
+#endif
+
+static struct i2c_driver sbsm_driver = {
+ .driver = {
+ .name = "sbsm",
+ .of_match_table = of_match_ptr(sbsm_dt_ids),
+ },
+ .probe = sbsm_probe,
+ .remove = sbsm_remove,
+ .alert = sbsm_alert,
+ .id_table = sbsm_ids
+};
+module_i2c_driver(sbsm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Karl-Heinz Schneider <karl-heinz@schneider-inet.de>");
+MODULE_DESCRIPTION("SBSM Smart Battery System Manager");
diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
index a1385023a29b..fb0e040b1abb 100644
--- a/include/linux/i2c-smbus.h
+++ b/include/linux/i2c-smbus.h
@@ -42,7 +42,6 @@
* properly set.
*/
struct i2c_smbus_alert_setup {
- unsigned int alert_edge_triggered:1;
int irq;
};
@@ -50,4 +49,13 @@ struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
struct i2c_smbus_alert_setup *setup);
int i2c_handle_smbus_alert(struct i2c_client *ara);
+#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
+int of_i2c_setup_smbus_alert(struct i2c_adapter *adap);
+#else
+static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
+{
+ return 0;
+}
+#endif
+
#endif /* _LINUX_I2C_SMBUS_H */
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-30 02:59:46 +0000