diff options
| -rw-r--r-- | init/initramfs.c | 7 | ||||
| -rw-r--r-- | scripts/gen_initramfs_list.sh | 17 | ||||
| -rw-r--r-- | usr/Makefile | 42 | ||||
| -rw-r--r-- | usr/initramfs_data.S | 2 | ||||
| -rw-r--r-- | usr/initramfs_data.bz2.S | 29 | ||||
| -rw-r--r-- | usr/initramfs_data.gz.S | 29 | ||||
| -rw-r--r-- | usr/initramfs_data.lzma.S | 29 |
7 files changed, 135 insertions, 20 deletions
diff --git a/init/initramfs.c b/init/initramfs.c index 40bd4fb95788..a3ba91cdab89 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -389,7 +389,7 @@ static int __init write_buffer(char *buf, unsigned len) return len - count; } - +#if defined CONFIG_RD_GZIP || defined CONFIG_RD_BZIP2 || defined CONFIG_RD_LZMA static int __init flush_buffer(void *bufv, unsigned len) { char *buf = (char *) bufv; @@ -412,6 +412,7 @@ static int __init flush_buffer(void *bufv, unsigned len) } return origLen; } +#endif static unsigned my_inptr; /* index of next byte to be processed in inbuf */ @@ -449,10 +450,12 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) continue; } this_header = 0; +#ifdef CONFIG_RD_GZIP if (!gunzip(buf, len, NULL, flush_buffer, NULL, &my_inptr, error) && message == NULL) goto ok; +#endif #ifdef CONFIG_RD_BZIP2 message = NULL; /* Zero out message, or else cpio will @@ -473,7 +476,9 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) goto ok; } #endif +#if defined CONFIG_RD_GZIP || defined CONFIG_RD_BZIP2 || defined CONFIG_RD_LZMA ok: +#endif if (state != Reset) error("junk in compressed archive"); this_header = saved_offset + my_inptr; diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh index 5f3415f28736..41041e4923f7 100644 --- a/scripts/gen_initramfs_list.sh +++ b/scripts/gen_initramfs_list.sh @@ -5,7 +5,7 @@ # Released under the terms of the GNU GPL # # Generate a cpio packed initramfs. It uses gen_init_cpio to generate -# the cpio archive, and gzip to pack it. +# the cpio archive, and then compresses it. # The script may also be used to generate the inputfile used for gen_init_cpio # This script assumes that gen_init_cpio is located in usr/ directory @@ -16,8 +16,8 @@ usage() { cat << EOF Usage: $0 [-o <file>] [-u <uid>] [-g <gid>] {-d | <cpio_source>} ... - -o <file> Create gzipped initramfs file named <file> using - gen_init_cpio and gzip + -o <file> Create compressed initramfs file named <file> using + gen_init_cpio and compressor depending on the extension -u <uid> User ID to map to user ID 0 (root). <uid> is only meaningful if <cpio_source> is a directory. "squash" forces all files to uid 0. @@ -225,6 +225,7 @@ cpio_list= output="/dev/stdout" output_file="" is_cpio_compressed= +compr="gzip -9 -f" arg="$1" case "$arg" in @@ -233,11 +234,15 @@ case "$arg" in echo "deps_initramfs := \\" shift ;; - "-o") # generate gzipped cpio image named $1 + "-o") # generate compressed cpio image named $1 shift output_file="$1" cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)" output=${cpio_list} + echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f" + echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f" + echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f" + echo "$output_file" | grep -q "\.cpio$" && compr="cat" shift ;; esac @@ -274,7 +279,7 @@ while [ $# -gt 0 ]; do esac done -# If output_file is set we will generate cpio archive and gzip it +# If output_file is set we will generate cpio archive and compress it # we are carefull to delete tmp files if [ ! -z ${output_file} ]; then if [ -z ${cpio_file} ]; then @@ -287,7 +292,7 @@ if [ ! -z ${output_file} ]; then if [ "${is_cpio_compressed}" = "compressed" ]; then cat ${cpio_tfile} > ${output_file} else - cat ${cpio_tfile} | gzip -f -9 - > ${output_file} + cat ${cpio_tfile} | ${compr} - > ${output_file} fi [ -z ${cpio_file} ] && rm ${cpio_tfile} fi diff --git a/usr/Makefile b/usr/Makefile index 201f27f8cbaf..451cdff7dff9 100644 --- a/usr/Makefile +++ b/usr/Makefile @@ -5,14 +5,32 @@ klibcdirs:; PHONY += klibcdirs +# Find out "preferred" ramdisk compressor. Order of preference is +# 1. bzip2 efficient, and likely to be present +# 2. gzip former default +# 3. lzma +# 4. none + +# None of the above +suffix_y = + +# Lzma, but no gzip nor bzip2 +suffix_$(CONFIG_RD_LZMA) = .lzma + +# Gzip, but no bzip2 +suffix_$(CONFIG_RD_GZIP) = .gz + +# Bzip2 +suffix_$(CONFIG_RD_BZIP2) = .bz2 + # Generate builtin.o based on initramfs_data.o -obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o +obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o -# initramfs_data.o contains the initramfs_data.cpio.gz image. +# initramfs_data.o contains the compressed initramfs_data.cpio image. # The image is included using .incbin, a dependency which is not # tracked automatically. -$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio.gz FORCE +$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE ##### # Generate the initramfs cpio archive @@ -25,28 +43,28 @@ ramfs-args := \ $(if $(CONFIG_INITRAMFS_ROOT_UID), -u $(CONFIG_INITRAMFS_ROOT_UID)) \ $(if $(CONFIG_INITRAMFS_ROOT_GID), -g $(CONFIG_INITRAMFS_ROOT_GID)) -# .initramfs_data.cpio.gz.d is used to identify all files included +# .initramfs_data.cpio.d is used to identify all files included # in initramfs and to detect if any files are added/removed. # Removed files are identified by directory timestamp being updated # The dependency list is generated by gen_initramfs.sh -l -ifneq ($(wildcard $(obj)/.initramfs_data.cpio.gz.d),) - include $(obj)/.initramfs_data.cpio.gz.d +ifneq ($(wildcard $(obj)/.initramfs_data.cpio.d),) + include $(obj)/.initramfs_data.cpio.d endif quiet_cmd_initfs = GEN $@ cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) -targets := initramfs_data.cpio.gz +targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio # do not try to update files included in initramfs $(deps_initramfs): ; $(deps_initramfs): klibcdirs -# We rebuild initramfs_data.cpio.gz if: -# 1) Any included file is newer then initramfs_data.cpio.gz +# We rebuild initramfs_data.cpio if: +# 1) Any included file is newer then initramfs_data.cpio # 2) There are changes in which files are included (added or deleted) -# 3) If gen_init_cpio are newer than initramfs_data.cpio.gz +# 3) If gen_init_cpio are newer than initramfs_data.cpio # 4) arguments to gen_initramfs.sh changes -$(obj)/initramfs_data.cpio.gz: $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs - $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.gz.d +$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs + $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d $(call if_changed,initfs) diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S index c2e1ad424f4a..7c6973d8d829 100644 --- a/usr/initramfs_data.S +++ b/usr/initramfs_data.S @@ -26,5 +26,5 @@ SECTIONS */ .section .init.ramfs,"a" -.incbin "usr/initramfs_data.cpio.gz" +.incbin "usr/initramfs_data.cpio" diff --git a/usr/initramfs_data.bz2.S b/usr/initramfs_data.bz2.S new file mode 100644 index 000000000000..bc54d090365c --- /dev/null +++ b/usr/initramfs_data.bz2.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.bz2" diff --git a/usr/initramfs_data.gz.S b/usr/initramfs_data.gz.S new file mode 100644 index 000000000000..890c8dd1d6bd --- /dev/null +++ b/usr/initramfs_data.gz.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.gz" diff --git a/usr/initramfs_data.lzma.S b/usr/initramfs_data.lzma.S new file mode 100644 index 000000000000..e11469e48562 --- /dev/null +++ b/usr/initramfs_data.lzma.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.lzma" |