diff options
| -rw-r--r-- | drivers/mtd/maps/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/mtd/maps/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mtd/maps/dmv182.c | 146 |
3 files changed, 0 insertions, 156 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 74fe0c2f05a6..7071486b4f2f 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -425,15 +425,6 @@ config MTD_UCLINUX help Map driver to support image based filesystems for uClinux. -config MTD_DMV182 - tristate "Map driver for Dy-4 SVME/DMV-182 board." - depends on DMV182 - select MTD_MAP_BANK_WIDTH_32 - select MTD_CFI_I8 - select MTD_CFI_AMDSTD - help - Map driver for Dy-4 SVME/DMV-182 board. - config MTD_INTEL_VR_NOR tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0" depends on PCI diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 93f4db2c1da8..819e2aba0db2 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o obj-$(CONFIG_MTD_H720X) += h720x-flash.o obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o obj-$(CONFIG_MTD_IXP2000) += ixp2000.o -obj-$(CONFIG_MTD_DMV182) += dmv182.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c deleted file mode 100644 index 6538ac675e00..000000000000 --- a/drivers/mtd/maps/dmv182.c +++ /dev/null @@ -1,146 +0,0 @@ - -/* - * drivers/mtd/maps/dmv182.c - * - * Flash map driver for the Dy4 SVME182 board - * - * Copyright 2003-2004, TimeSys Corporation - * - * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/errno.h> - -/* - * This driver currently handles only the 16MiB user flash bank 1 on the - * board. It does not provide access to bank 0 (contains the Dy4 FFW), bank 2 - * (VxWorks boot), or the optional 48MiB expansion flash. - * - * scott.wood@timesys.com: On the newer boards with 128MiB flash, it - * now supports the first 96MiB (the boot flash bank containing FFW - * is excluded). The VxWorks loader is in partition 1. - */ - -#define FLASH_BASE_ADDR 0xf0000000 -#define FLASH_BANK_SIZE (128*1024*1024) - -MODULE_AUTHOR("Scott Wood, TimeSys Corporation <scott.wood@timesys.com>"); -MODULE_DESCRIPTION("User-programmable flash device on the Dy4 SVME182 board"); -MODULE_LICENSE("GPL"); - -static struct map_info svme182_map = { - .name = "Dy4 SVME182", - .bankwidth = 32, - .size = 128 * 1024 * 1024 -}; - -#define BOOTIMAGE_PART_SIZE ((6*1024*1024)-RESERVED_PART_SIZE) - -// Allow 6MiB for the kernel -#define NEW_BOOTIMAGE_PART_SIZE (6 * 1024 * 1024) -// Allow 1MiB for the bootloader -#define NEW_BOOTLOADER_PART_SIZE (1024 * 1024) -// Use the remaining 9MiB at the end of flash for the RFS -#define NEW_RFS_PART_SIZE (0x01000000 - NEW_BOOTLOADER_PART_SIZE - \ - NEW_BOOTIMAGE_PART_SIZE) - -static struct mtd_partition svme182_partitions[] = { - // The Lower PABS is only 128KiB, but the partition code doesn't - // like partitions that don't end on the largest erase block - // size of the device, even if all of the erase blocks in the - // partition are small ones. The hardware should prevent - // writes to the actual PABS areas. - { - name: "Lower PABS and CPU 0 bootloader or kernel", - size: 6*1024*1024, - offset: 0, - }, - { - name: "Root Filesystem", - size: 10*1024*1024, - offset: MTDPART_OFS_NXTBLK - }, - { - name: "CPU1 Bootloader", - size: 1024*1024, - offset: MTDPART_OFS_NXTBLK, - }, - { - name: "Extra", - size: 110*1024*1024, - offset: MTDPART_OFS_NXTBLK - }, - { - name: "Foundation Firmware and Upper PABS", - size: 1024*1024, - offset: MTDPART_OFS_NXTBLK, - mask_flags: MTD_WRITEABLE // read-only - } -}; - -static struct mtd_info *this_mtd; - -static int __init init_svme182(void) -{ - struct mtd_partition *partitions; - int num_parts = ARRAY_SIZE(svme182_partitions); - - partitions = svme182_partitions; - - svme182_map.virt = ioremap(FLASH_BASE_ADDR, svme182_map.size); - - if (svme182_map.virt == 0) { - printk("Failed to ioremap FLASH memory area.\n"); - return -EIO; - } - - simple_map_init(&svme182_map); - - this_mtd = do_map_probe("cfi_probe", &svme182_map); - if (!this_mtd) - { - iounmap((void *)svme182_map.virt); - return -ENXIO; - } - - printk(KERN_NOTICE "SVME182 flash device: %dMiB at 0x%08x\n", - this_mtd->size >> 20, FLASH_BASE_ADDR); - - this_mtd->owner = THIS_MODULE; - mtd_device_register(this_mtd, partitions, num_parts); - - return 0; -} - -static void __exit cleanup_svme182(void) -{ - if (this_mtd) - { - mtd_device_unregister(this_mtd); - map_destroy(this_mtd); - } - - if (svme182_map.virt) - { - iounmap((void *)svme182_map.virt); - svme182_map.virt = 0; - } - - return; -} - -module_init(init_svme182); -module_exit(cleanup_svme182); |