diff options
27 files changed, 94 insertions, 95 deletions
diff --git a/Documentation/arm/empeg/README b/Documentation/arm/empeg/README deleted file mode 100644 index 09cc8d03ae58..000000000000 --- a/Documentation/arm/empeg/README +++ /dev/null @@ -1,13 +0,0 @@ -Empeg, Ltd's Empeg MP3 Car Audio Player - -The initial design is to go in your car, but you can use it at home, on a -boat... almost anywhere. The principle is to store CD-quality music using -MPEG technology onto a hard disk in the unit, and use the power of the -embedded computer to serve up the music you want. - -For more details, see: - - http://www.empeg.com - - - diff --git a/Documentation/arm/empeg/ir.txt b/Documentation/arm/empeg/ir.txt deleted file mode 100644 index 10a297450164..000000000000 --- a/Documentation/arm/empeg/ir.txt +++ /dev/null @@ -1,49 +0,0 @@ -Infra-red driver documentation. - -Mike Crowe <mac@empeg.com> -(C) Empeg Ltd 1999 - -Not a lot here yet :-) - -The Kenwood KCA-R6A remote control generates a sequence like the following: - -Go low for approx 16T (Around 9000us) -Go high for approx 8T (Around 4000us) -Go low for less than 2T (Around 750us) - -For each of the 32 bits - Go high for more than 2T (Around 1500us) == 1 - Go high for less than T (Around 400us) == 0 - Go low for less than 2T (Around 750us) - -Rather than repeat a signal when the button is held down certain buttons -generate the following code to indicate repetition. - -Go low for approx 16T -Go high for approx 4T -Go low for less than 2T - -(By removing the <2T from the start of the sequence and placing at the end - it can be considered a stop bit but I found it easier to deal with it at - the start). - -The 32 bits are encoded as XxYy where x and y are the actual data values -while X and Y are the logical inverses of the associated data values. Using -LSB first yields sensible codes for the numbers. - -All codes are of the form b9xx - -The numeric keys generate the code 0x where x is the number pressed. - -Tuner 1c -Tape 1d -CD 1e -CD-MD-CH 1f -Track- 0a -Track+ 0b -Rewind 0c -FF 0d -DNPP 5e -Play/Pause 0e -Vol+ 14 -Vol- 15 diff --git a/Documentation/arm/empeg/mkdevs b/Documentation/arm/empeg/mkdevs deleted file mode 100644 index 7a85e28d14f3..000000000000 --- a/Documentation/arm/empeg/mkdevs +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh -mknod /dev/display c 244 0 -mknod /dev/ir c 242 0 -mknod /dev/usb0 c 243 0 -mknod /dev/audio c 245 4 -mknod /dev/dsp c 245 3 -mknod /dev/mixer c 245 0 -mknod /dev/empeg_state c 246 0 -mknod /dev/radio0 c 81 64 -ln -sf radio0 radio -ln -sf usb0 usb diff --git a/MAINTAINERS b/MAINTAINERS index c842ec34d2fe..43de305c3213 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -610,6 +610,11 @@ P: Philipp Zabel M: philipp.zabel@gmail.com S: Maintained +ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT +P: Michael Petchkovsky +M: mkpetch@internode.on.net +S: Maintained + ARM/TOSA MACHINE SUPPORT P: Dmitry Baryshkov M: dbaryshkov@gmail.com diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index db8309161408..780bbf7cb26f 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -54,11 +54,13 @@ /* * Prototypes */ +#ifdef CONFIG_PM static int sharpsl_off_charge_battery(void); -static int sharpsl_check_battery_temp(void); static int sharpsl_check_battery_voltage(void); -static int sharpsl_ac_check(void); static int sharpsl_fatal_check(void); +#endif +static int sharpsl_check_battery_temp(void); +static int sharpsl_ac_check(void); static int sharpsl_average_value(int ad); static void sharpsl_average_clear(void); static void sharpsl_charge_toggle(struct work_struct *private_); @@ -424,6 +426,7 @@ static int sharpsl_check_battery_temp(void) return 0; } +#ifdef CONFIG_PM static int sharpsl_check_battery_voltage(void) { int val, i, buff[5]; @@ -455,6 +458,7 @@ static int sharpsl_check_battery_voltage(void) return 0; } +#endif static int sharpsl_ac_check(void) { @@ -586,8 +590,6 @@ static int corgi_pxa_pm_enter(suspend_state_t state) return 0; } -#endif - /* * Check for fatal battery errors @@ -738,7 +740,10 @@ static int sharpsl_off_charge_battery(void) } } } - +#else +#define sharpsl_pm_suspend NULL +#define sharpsl_pm_resume NULL +#endif static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -768,10 +773,12 @@ static void sharpsl_apm_get_power_status(struct apm_power_info *info) info->battery_life = sharpsl_pm.battstat.mainbat_percent; } +#ifdef CONFIG_PM static struct platform_suspend_ops sharpsl_pm_ops = { .enter = corgi_pxa_pm_enter, .valid = suspend_valid_only_mem, }; +#endif static int __init sharpsl_pm_probe(struct platform_device *pdev) { @@ -802,7 +809,9 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev) apm_get_power_status = sharpsl_apm_get_power_status; +#ifdef CONFIG_PM suspend_set_ops(&sharpsl_pm_ops); +#endif mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 9c040c78889a..e263fda3e2d1 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -165,6 +165,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = { static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { { I2C_BOARD_INFO("fm3130", 0x68), + }, { I2C_BOARD_INFO("24c64", 0x50), }, }; diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 76d76e2fa69e..bffa6741a751 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_AT91RM9200_GPIO_H #define __ASM_ARCH_AT91RM9200_GPIO_H +#include <linux/kernel.h> #include <asm/irq.h> #define PIN_BASE NR_AIC_IRQS @@ -220,6 +221,7 @@ static inline int gpio_request(unsigned gpio, const char *label) static inline void gpio_free(unsigned gpio) { + might_sleep(); } extern int gpio_direction_input(unsigned gpio); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index de53f0be71b9..48345fb34613 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -26,6 +26,7 @@ #include <linux/serial_core.h> #include <linux/device.h> #include <linux/mm.h> +#include <linux/dma-mapping.h> #include <linux/time.h> #include <linux/timex.h> #include <linux/delay.h> @@ -449,12 +450,13 @@ static struct resource ep93xx_ohci_resources[] = { }, }; + static struct platform_device ep93xx_ohci_device = { .name = "ep93xx-ohci", .id = -1, .dev = { - .dma_mask = (void *)0xffffffff, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), .resource = ep93xx_ohci_resources, diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h index 6e3d795f2264..502d5aa2c093 100644 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ b/arch/arm/mach-imx/include/mach/gpio.h @@ -1,5 +1,6 @@ #ifndef _IMX_GPIO_H +#include <linux/kernel.h> #include <mach/imx-regs.h> #define IMX_GPIO_ALLOC_MODE_NORMAL 0 @@ -63,6 +64,8 @@ static inline int gpio_request(unsigned gpio, const char *label) static inline void gpio_free(unsigned gpio) { + might_sleep(); + imx_gpio_free(gpio); } diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h index 9fbde177920f..cd5aec26c072 100644 --- a/arch/arm/mach-ixp4xx/include/mach/gpio.h +++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h @@ -25,6 +25,7 @@ #ifndef __ASM_ARCH_IXP4XX_GPIO_H #define __ASM_ARCH_IXP4XX_GPIO_H +#include <linux/kernel.h> #include <mach/hardware.h> static inline int gpio_request(unsigned gpio, const char *label) @@ -34,6 +35,8 @@ static inline int gpio_request(unsigned gpio, const char *label) static inline void gpio_free(unsigned gpio) { + might_sleep(); + return; } diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h index 73c84168761c..d4af5c335f16 100644 --- a/arch/arm/mach-ks8695/include/mach/gpio.h +++ b/arch/arm/mach-ks8695/include/mach/gpio.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_GPIO_H_ #define __ASM_ARCH_GPIO_H_ +#include <linux/kernel.h> + #define KS8695_GPIO_0 0 #define KS8695_GPIO_1 1 #define KS8695_GPIO_2 2 @@ -74,6 +76,7 @@ static inline int gpio_request(unsigned int pin, const char *label) static inline void gpio_free(unsigned int pin) { + might_sleep(); } #endif diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 1be4a390c63f..f902a7c37c31 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -35,6 +35,8 @@ #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include "devices.h" + /*! * @file mx31ads.c * diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 11fda95c86a5..843f68c8ead1 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -91,12 +91,12 @@ static struct map_desc pcm037_io_desc[] __initdata = { .virtual = AIPS1_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), .length = AIPS1_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE_NONSHARED }, { .virtual = AIPS2_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), .length = AIPS2_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE_NONSHARED }, }; diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index 5241e6a286cc..5503ca09c4ae 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -8,6 +8,7 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#include <linux/kernel.h> #include <linux/compiler.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -63,6 +64,7 @@ EXPORT_SYMBOL(gpio_request); void gpio_free(unsigned gpio) { + might_sleep(); clear_bit(gpio, gpiores); return; } diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c index fc419868e39f..f99d08811e5a 100644 --- a/arch/arm/mach-orion5x/gpio.c +++ b/arch/arm/mach-orion5x/gpio.c @@ -165,6 +165,8 @@ EXPORT_SYMBOL(gpio_request); void gpio_free(unsigned pin) { + might_sleep(); + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { pr_debug("%s: invalid GPIO %d\n", __func__, pin); return; diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index eb7d6c94aa42..e35259032813 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -204,7 +204,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .read_devdata = corgipm_read_devdata, .charger_wakeup = corgi_charger_wakeup, .should_wakeup = corgi_should_wakeup, -#ifdef CONFIG_BACKLIGHT_CORGI +#if defined(CONFIG_LCD_CORGI) + .backlight_limit = corgi_lcd_limit_intensity, +#elif defined(CONFIG_BACKLIGHT_CORGI) .backlight_limit = corgibl_limit_intensity, #endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h index 3b1d4a72d4d1..8242e14a44fa 100644 --- a/arch/arm/mach-pxa/include/mach/sharpsl.h +++ b/arch/arm/mach-pxa/include/mach/sharpsl.h @@ -26,6 +26,7 @@ struct corgits_machinfo { * SharpSL Backlight */ extern void corgibl_limit_intensity(int limit); +extern void corgi_lcd_limit_intensity(int limit); /* diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 524f656dc56d..f0a5bbae0b45 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -385,6 +385,16 @@ static void __init spitz_init_spi(void) if (err) goto err_free_2; + err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1); + if (err) + goto err_free_3; + err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1); + if (err) + goto err_free_3; + err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1); + if (err) + goto err_free_3; + if (machine_is_akita()) { spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; @@ -394,6 +404,8 @@ static void __init spitz_init_spi(void) spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); return; +err_free_3: + gpio_free(SPITZ_GPIO_MAX1111_CS); err_free_2: gpio_free(SPITZ_GPIO_LCDCON_CS); err_free_1: diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 53018db106ac..072e77cfe5a3 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -198,7 +198,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .read_devdata = spitzpm_read_devdata, .charger_wakeup = spitz_charger_wakeup, .should_wakeup = spitz_should_wakeup, -#ifdef CONFIG_BACKLIGHT_CORGI +#if defined(CONFIG_LCD_CORGI) + .backlight_limit = corgi_lcd_limit_intensity, +#elif defined(CONFIG_BACKLIGHT_CORGI) .backlight_limit = corgibl_limit_intensity, #endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 04dc8b65401b..8f6cf56c11c0 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -349,7 +349,7 @@ ENTRY(cpu_xsc3_switch_mm) cpu_xsc3_mt_table: .long 0x00 @ L_PTE_MT_UNCACHED .long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE - .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH + .long PTE_EXT_TEX(5) | PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK .long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED .long 0x00 @ unused diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 733e0acac916..de5c4747453f 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -188,7 +188,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) struct mxc_gpio_port *port = container_of(chip, struct mxc_gpio_port, chip); - return (__raw_readl(port->base + GPIO_DR) >> offset) & 1; + return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; } static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h index 65b6810124c1..5d4cb1196441 100644 --- a/arch/arm/plat-mxc/include/mach/io.h +++ b/arch/arm/plat-mxc/include/mach/io.h @@ -14,6 +14,26 @@ /* Allow IO space to be anywhere in the memory */ #define IO_SPACE_LIMIT 0xffffffff +#ifdef CONFIG_ARCH_MX3 +#define __arch_ioremap __mx3_ioremap +#define __arch_iounmap __iounmap + +static inline void __iomem * +__mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) +{ + if (mtype == MT_DEVICE) { + /* Access all peripherals below 0x80000000 as nonshared device + * but leave l2cc alone. + */ + if ((phys_addr < 0x80000000) && ((phys_addr < L2CC_BASE_ADDR) || + (phys_addr >= L2CC_BASE_ADDR + L2CC_SIZE))) + mtype = MT_DEVICE_NONSHARED; + } + + return __arm_ioremap(phys_addr, size, mtype); +} +#endif + /* io address mapping macro */ #define __io(a) ((void __iomem *)(a)) diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c index 2768c69257f6..1f3cc512eff8 100644 --- a/drivers/leds/leds-da903x.c +++ b/drivers/leds/leds-da903x.c @@ -58,7 +58,7 @@ static void da903x_led_work(struct work_struct *work) offset = DA9030_LED_OFFSET(led->id); val = led->flags & ~0x87; val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */ - val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */ + val |= (0x7 - (led->new_brightness >> 5)) & 0x7; /* PWM<2:0> */ da903x_write(led->master, DA9030_LED1_CONTROL + offset, val); break; case DA9030_ID_VIBRA: diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 696cf3647ceb..2fadf323c696 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -391,6 +391,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; WARN_ON(host->mrq != NULL); @@ -402,7 +403,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) return; } - spin_lock_irq(&host->lock); + spin_lock_irqsave(&host->lock, flags); host->mrq = mrq; @@ -411,7 +412,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) mmci_start_command(host, mrq->cmd, 0); - spin_unlock_irq(&host->lock); + spin_unlock_irqrestore(&host->lock, flags); } static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c94d3c4b7521..579d63a81aa2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1276,7 +1276,7 @@ config SERIAL_SGI_IOC3 say Y or M. Otherwise, say N. config SERIAL_NETX - bool "NetX serial port support" + tristate "NetX serial port support" depends on ARM && ARCH_NETX select SERIAL_CORE help @@ -1288,7 +1288,7 @@ config SERIAL_NETX config SERIAL_NETX_CONSOLE bool "Console on NetX serial port" - depends on SERIAL_NETX + depends on SERIAL_NETX=y select SERIAL_CORE_CONSOLE help If you have enabled the serial port on the Hilscher NetX SoC diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c index 3f489329e8d3..3e5dda8518b7 100644 --- a/drivers/serial/netx-serial.c +++ b/drivers/serial/netx-serial.c @@ -42,8 +42,6 @@ #define SERIAL_NX_MAJOR 204 #define MINOR_START 170 -#ifdef CONFIG_SERIAL_NETX_CONSOLE - enum uart_regs { UART_DR = 0x00, UART_SR = 0x04, @@ -528,6 +526,8 @@ static struct netx_port netx_ports[] = { } }; +#ifdef CONFIG_SERIAL_NETX_CONSOLE + static void netx_console_putchar(struct uart_port *port, int ch) { while (readl(port->membase + UART_FR) & FR_BUSY); diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 2afd47eefe74..f8a4bb20f41a 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -439,7 +439,7 @@ static int corgi_bl_update_status(struct backlight_device *bd) return corgi_bl_set_intensity(lcd, intensity); } -void corgibl_limit_intensity(int limit) +void corgi_lcd_limit_intensity(int limit) { if (limit) corgibl_flags |= CORGIBL_BATTLOW; @@ -448,7 +448,7 @@ void corgibl_limit_intensity(int limit) backlight_update_status(the_corgi_lcd->bl_dev); } -EXPORT_SYMBOL(corgibl_limit_intensity); +EXPORT_SYMBOL(corgi_lcd_limit_intensity); static struct backlight_ops corgi_bl_ops = { .get_brightness = corgi_bl_get_intensity, |