diff options
-rw-r--r-- | arch/arm/boot/dts/dm8148-evm.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/dm8148-t410.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/dm8168-evm.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra62x-j5eco-evm.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/logicpd-som-lv.dtsi | 11 | ||||
-rw-r--r-- | arch/arm/mach-omap1/ams-delta-fiq.c | 28 | ||||
-rw-r--r-- | arch/arm/mach-omap2/powerdomain.c | 4 |
7 files changed, 30 insertions, 21 deletions
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index d6657b3bae84..85d7b5148b0a 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -10,7 +10,7 @@ / { model = "DM8148 EVM"; - compatible = "ti,dm8148-evm", "ti,dm8148"; + compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 63883b3479f9..6418f9cdbe83 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -9,7 +9,7 @@ / { model = "HP t410 Smart Zero Client"; - compatible = "hp,t410", "ti,dm8148"; + compatible = "hp,t410", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index c72a2132aa82..1d030d567307 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -10,7 +10,7 @@ / { model = "DM8168 EVM"; - compatible = "ti,dm8168-evm", "ti,dm8168"; + compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index fee0547f7302..31b824ad5d29 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -10,7 +10,7 @@ / { model = "DRA62x J5 Eco EVM"; - compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; + compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b47cac23a04b..6fa7bba3e801 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -26,7 +26,7 @@ gpio = <&gpio1 3 0>; /* gpio_3 */ startup-delay-us = <70000>; enable-active-high; - vin-supply = <&vmmc2>; + vin-supply = <&vaux3>; }; /* HS USB Host PHY on PORT 1 */ @@ -82,6 +82,7 @@ twl_audio: audio { compatible = "ti,twl4030-audio"; codec { + ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; }; }; }; @@ -199,6 +200,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ >; }; }; @@ -213,7 +215,7 @@ }; wl127x_gpio: pinmux_wl127x_gpio_pin { pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; @@ -260,6 +262,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &twl { twl_power: power { compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 793a24a53c52..d7ca9e2b40d2 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -58,22 +58,24 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) irq_num = gpio_to_irq(gpio); fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; - while (irq_counter[gpio] < fiq_count) { - if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { - struct irq_data *d = irq_get_irq_data(irq_num); - - /* - * It looks like handle_edge_irq() that - * OMAP GPIO edge interrupts default to, - * expects interrupt already unmasked. - */ - if (irq_chip && irq_chip->irq_unmask) + if (irq_counter[gpio] < fiq_count && + gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { + struct irq_data *d = irq_get_irq_data(irq_num); + + /* + * handle_simple_irq() that OMAP GPIO edge + * interrupts default to since commit 80ac93c27441 + * requires interrupt already acked and unmasked. + */ + if (irq_chip) { + if (irq_chip->irq_ack) + irq_chip->irq_ack(d); + if (irq_chip->irq_unmask) irq_chip->irq_unmask(d); } - generic_handle_irq(irq_num); - - irq_counter[gpio]++; } + for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++) + generic_handle_irq(irq_num); } return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 76eb6ec5f157..1e6a967cd2d5 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -188,7 +188,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) ((prev & OMAP_POWERSTATE_MASK) << 0)); trace_power_domain_target_rcuidle(pwrdm->name, trace_state, - smp_processor_id()); + raw_smp_processor_id()); } break; default: @@ -518,7 +518,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { /* Trace the pwrdm desired target state */ trace_power_domain_target_rcuidle(pwrdm->name, pwrst, - smp_processor_id()); + raw_smp_processor_id()); /* Program the pwrdm desired target state */ ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst); } |