diff options
| -rw-r--r-- | drivers/clocksource/arc_timer.c | 11 | ||||
| -rw-r--r-- | drivers/clocksource/fsl_ftm_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/mips-gic-timer.c | 2 | ||||
| -rw-r--r-- | kernel/time/timer.c | 6 |
4 files changed, 16 insertions, 5 deletions
diff --git a/drivers/clocksource/arc_timer.c b/drivers/clocksource/arc_timer.c index 4927355f9cbe..471b428d8034 100644 --- a/drivers/clocksource/arc_timer.c +++ b/drivers/clocksource/arc_timer.c @@ -251,9 +251,14 @@ static irqreturn_t timer_irq_handler(int irq, void *dev_id) int irq_reenable = clockevent_state_periodic(evt); /* - * Any write to CTRL reg ACks the interrupt, we rewrite the - * Count when [N]ot [H]alted bit. - * And re-arm it if perioid by [I]nterrupt [E]nable bit + * 1. ACK the interrupt + * - For ARC700, any write to CTRL reg ACKs it, so just rewrite + * Count when [N]ot [H]alted bit. + * - For HS3x, it is a bit subtle. On taken count-down interrupt, + * IP bit [3] is set, which needs to be cleared for ACK'ing. + * The write below can only update the other two bits, hence + * explicitly clears IP bit + * 2. Re-arm interrupt if periodic by writing to IE bit [0] */ write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH); diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/fsl_ftm_timer.c index 3ee7e6fea621..846d18daf893 100644 --- a/drivers/clocksource/fsl_ftm_timer.c +++ b/drivers/clocksource/fsl_ftm_timer.c @@ -281,7 +281,7 @@ static int __init __ftm_clk_init(struct device_node *np, char *cnt_name, static unsigned long __init ftm_clk_init(struct device_node *np) { - unsigned long freq; + long freq; freq = __ftm_clk_init(np, "ftm-evt-counter-en", "ftm-evt"); if (freq <= 0) diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c index 65e18c86d9b9..986b6796b631 100644 --- a/drivers/clocksource/mips-gic-timer.c +++ b/drivers/clocksource/mips-gic-timer.c @@ -166,7 +166,7 @@ static int __init __gic_clocksource_init(void) /* Set clocksource mask. */ count_width = read_gic_config() & GIC_CONFIG_COUNTBITS; - count_width >>= __fls(GIC_CONFIG_COUNTBITS); + count_width >>= __ffs(GIC_CONFIG_COUNTBITS); count_width *= 4; count_width += 32; gic_clocksource.mask = CLOCKSOURCE_MASK(count_width); diff --git a/kernel/time/timer.c b/kernel/time/timer.c index 48150ab42de9..4a4fd567fb26 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -1894,6 +1894,12 @@ int timers_dead_cpu(unsigned int cpu) raw_spin_lock_irq(&new_base->lock); raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); + /* + * The current CPUs base clock might be stale. Update it + * before moving the timers over. + */ + forward_timer_base(new_base); + BUG_ON(old_base->running_timer); for (i = 0; i < WHEEL_SIZE; i++) |