diff options
-rw-r--r-- | drivers/net/sfc/efx.c | 7 | ||||
-rw-r--r-- | drivers/net/sfc/efx.h | 3 | ||||
-rw-r--r-- | drivers/net/sfc/ethtool.c | 16 | ||||
-rw-r--r-- | drivers/net/sfc/falcon_boards.c | 66 | ||||
-rw-r--r-- | drivers/net/sfc/net_driver.h | 18 | ||||
-rw-r--r-- | drivers/net/sfc/phy.h | 2 | ||||
-rw-r--r-- | drivers/net/sfc/qt202x_phy.c | 3 | ||||
-rw-r--r-- | drivers/net/sfc/tenxpress.c | 24 |
8 files changed, 62 insertions, 77 deletions
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 0d0243b7ac34..612cd815088f 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1890,7 +1890,9 @@ int efx_port_dummy_op_int(struct efx_nic *efx) return 0; } void efx_port_dummy_op_void(struct efx_nic *efx) {} -void efx_port_dummy_op_blink(struct efx_nic *efx, bool blink) {} +void efx_port_dummy_op_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) +{ +} static struct efx_mac_operations efx_dummy_mac_operations = { .reconfigure = efx_port_dummy_op_void, @@ -1909,9 +1911,8 @@ static struct efx_phy_operations efx_dummy_phy_operations = { static struct efx_board efx_dummy_board_info = { .init = efx_port_dummy_op_int, .init_leds = efx_port_dummy_op_void, - .set_id_led = efx_port_dummy_op_blink, + .set_id_led = efx_port_dummy_op_set_id_led, .monitor = efx_port_dummy_op_int, - .blink = efx_port_dummy_op_blink, .fini = efx_port_dummy_op_void, }; diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index 179e0e3b0ec6..6f4639465163 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -69,7 +69,8 @@ extern void efx_hex_dump(const u8 *, unsigned int, const char *); /* Dummy PHY ops for PHY drivers */ extern int efx_port_dummy_op_int(struct efx_nic *efx); extern void efx_port_dummy_op_void(struct efx_nic *efx); -extern void efx_port_dummy_op_blink(struct efx_nic *efx, bool blink); +extern void +efx_port_dummy_op_set_id_led(struct efx_nic *efx, enum efx_led_mode mode); /* MTD */ #ifdef CONFIG_SFC_MTD diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index a313b61c8ff4..18e02712818c 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -187,13 +187,15 @@ static int efx_ethtool_phys_id(struct net_device *net_dev, u32 count) { struct efx_nic *efx = netdev_priv(net_dev); - efx->board_info.blink(efx, 1); - set_current_state(TASK_INTERRUPTIBLE); - if (count) - schedule_timeout(count * HZ); - else - schedule(); - efx->board_info.blink(efx, 0); + do { + efx->board_info.set_id_led(efx, EFX_LED_ON); + schedule_timeout_interruptible(HZ / 2); + + efx->board_info.set_id_led(efx, EFX_LED_OFF); + schedule_timeout_interruptible(HZ / 2); + } while (!signal_pending(current) && --count != 0); + + efx->board_info.set_id_led(efx, EFX_LED_DEFAULT); return 0; } diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c index d31c134981fd..b2505fc5c1f7 100644 --- a/drivers/net/sfc/falcon_boards.c +++ b/drivers/net/sfc/falcon_boards.c @@ -29,40 +29,6 @@ #define FALCON_BOARD_SFN4111T 0x51 #define FALCON_BOARD_SFN4112F 0x52 -/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */ -#define BLINK_INTERVAL (HZ/2) - -static void blink_led_timer(unsigned long context) -{ - struct efx_nic *efx = (struct efx_nic *)context; - struct efx_board *board = &efx->board_info; - - board->set_id_led(efx, board->blink_state); - board->blink_state = !board->blink_state; - if (board->blink_resubmit) - mod_timer(&board->blink_timer, jiffies + BLINK_INTERVAL); -} - -static void board_blink(struct efx_nic *efx, bool blink) -{ - struct efx_board *board = &efx->board_info; - - /* The rtnl mutex serialises all ethtool ioctls, so - * nothing special needs doing here. */ - if (blink) { - board->blink_resubmit = true; - board->blink_state = false; - setup_timer(&board->blink_timer, blink_led_timer, - (unsigned long)efx); - mod_timer(&board->blink_timer, jiffies + BLINK_INTERVAL); - } else { - board->blink_resubmit = false; - if (board->blink_timer.function) - del_timer_sync(&board->blink_timer); - board->init_leds(efx); - } -} - /***************************************************************************** * Support for LM87 sensor chip used on several boards */ @@ -469,7 +435,7 @@ static int sfe4001_init(struct efx_nic *efx) /* 10Xpress has fixed-function LED pins, so there is no board-specific * blink code. */ - efx->board_info.blink = tenxpress_phy_blink; + efx->board_info.set_id_led = tenxpress_set_id_led; efx->board_info.monitor = sfe4001_check_hw; efx->board_info.fini = sfe4001_fini; @@ -546,7 +512,7 @@ static int sfn4111t_init(struct efx_nic *efx) if (!efx->board_info.hwmon_client) return -EIO; - efx->board_info.blink = tenxpress_phy_blink; + efx->board_info.set_id_led = tenxpress_set_id_led; efx->board_info.monitor = sfn4111t_check_hw; efx->board_info.fini = sfn4111t_fini; @@ -619,10 +585,11 @@ static void sfe4002_init_leds(struct efx_nic *efx) falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF); } -static void sfe4002_set_id_led(struct efx_nic *efx, bool state) +static void sfe4002_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) { - falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON : - QUAKE_LED_OFF); + falcon_qt202x_set_led( + efx, SFE4002_FAULT_LED, + (mode == EFX_LED_ON) ? QUAKE_LED_ON : QUAKE_LED_OFF); } static int sfe4002_check_hw(struct efx_nic *efx) @@ -644,7 +611,6 @@ static int sfe4002_init(struct efx_nic *efx) efx->board_info.monitor = sfe4002_check_hw; efx->board_info.init_leds = sfe4002_init_leds; efx->board_info.set_id_led = sfe4002_set_id_led; - efx->board_info.blink = board_blink; efx->board_info.fini = efx_fini_lm87; return 0; } @@ -683,10 +649,23 @@ static void sfn4112f_init_leds(struct efx_nic *efx) QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT); } -static void sfn4112f_set_id_led(struct efx_nic *efx, bool state) +static void sfn4112f_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) { - falcon_qt202x_set_led(efx, SFN4112F_LINK_LED, - state ? QUAKE_LED_ON : QUAKE_LED_OFF); + int reg; + + switch (mode) { + case EFX_LED_OFF: + reg = QUAKE_LED_OFF; + break; + case EFX_LED_ON: + reg = QUAKE_LED_ON; + break; + default: + reg = QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT; + break; + } + + falcon_qt202x_set_led(efx, SFN4112F_LINK_LED, reg); } static int sfn4112f_check_hw(struct efx_nic *efx) @@ -703,7 +682,6 @@ static int sfn4112f_init(struct efx_nic *efx) efx->board_info.monitor = sfn4112f_check_hw; efx->board_info.init_leds = sfn4112f_init_leds; efx->board_info.set_id_led = sfn4112f_set_id_led; - efx->board_info.blink = board_blink; efx->board_info.fini = efx_fini_lm87; return 0; } diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index bc6fb2b29664..6b05d69429ee 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -388,6 +388,12 @@ struct efx_channel { }; +enum efx_led_mode { + EFX_LED_OFF = 0, + EFX_LED_ON = 1, + EFX_LED_DEFAULT = 2 +}; + /** * struct efx_board - board information * @type: Board model type @@ -395,13 +401,9 @@ struct efx_channel { * @minor: Minor rev. (0, 1, ...) * @init: Initialisation function * @init_leds: Sets up board LEDs. May be called repeatedly. - * @set_id_led: Turns the identification LED on or off - * @blink: Starts/stops blinking + * @set_id_led: Set state of identifying LED or revert to automatic function * @monitor: Board-specific health check function * @fini: Cleanup function - * @blink_state: Current blink state - * @blink_resubmit: Blink timer resubmission flag - * @blink_timer: Blink timer * @hwmon_client: I2C client for hardware monitor * @ioexp_client: I2C client for power/port control */ @@ -414,13 +416,9 @@ struct efx_board { * have a separate init callback that happens later than * board init. */ void (*init_leds)(struct efx_nic *efx); - void (*set_id_led) (struct efx_nic *efx, bool state); + void (*set_id_led) (struct efx_nic *efx, enum efx_led_mode mode); int (*monitor) (struct efx_nic *nic); - void (*blink) (struct efx_nic *efx, bool start); void (*fini) (struct efx_nic *nic); - bool blink_state; - bool blink_resubmit; - struct timer_list blink_timer; struct i2c_client *hwmon_client, *ioexp_client; }; diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h index b5150f3bca31..2ad1cec2c720 100644 --- a/drivers/net/sfc/phy.h +++ b/drivers/net/sfc/phy.h @@ -16,7 +16,7 @@ extern struct efx_phy_operations falcon_sfx7101_phy_ops; extern struct efx_phy_operations falcon_sft9001_phy_ops; -extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink); +extern void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode); /* Wait for the PHY to boot. Return 0 on success, -EINVAL if the PHY failed * to boot due to corrupt flash, or some other negative error code. */ diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 560eb18280e1..05c0f9acedbd 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -228,9 +228,6 @@ static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecm static void qt202x_phy_fini(struct efx_nic *efx) { - /* Clobber the LED if it was blinking */ - efx->board_info.blink(efx, false); - /* Free the context block */ kfree(efx->phy_data); efx->phy_data = NULL; diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 19c78d281700..6a8e3ea03811 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -613,21 +613,29 @@ static void tenxpress_phy_fini(struct efx_nic *efx) } -/* Set the RX and TX LEDs and Link LED flashing. The other LEDs - * (which probably aren't wired anyway) are left in AUTO mode */ -void tenxpress_phy_blink(struct efx_nic *efx, bool blink) +/* Override the RX, TX and link LEDs */ +void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) { int reg; - if (blink) - reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) | - (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) | - (PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN); - else + switch (mode) { + case EFX_LED_OFF: + reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) | + (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) | + (PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN); + break; + case EFX_LED_ON: + reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) | + (PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) | + (PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN); + break; + default: if (efx->phy_type == PHY_TYPE_SFX7101) reg = SFX7101_PMA_PMD_LED_DEFAULT; else reg = SFT9001_PMA_PMD_LED_DEFAULT; + break; + } efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg); } |