diff options
-rw-r--r-- | arch/arm/mach-ep93xx/edb93xx.c | 13 | ||||
-rw-r--r-- | arch/arm/mach-ep93xx/simone.c | 11 | ||||
-rw-r--r-- | arch/arm/mach-ep93xx/ts72xx.c | 25 | ||||
-rw-r--r-- | arch/arm/mach-ep93xx/vision_ep9307.c | 15 | ||||
-rw-r--r-- | drivers/spi/spi-ep93xx.c | 32 | ||||
-rw-r--r-- | include/linux/platform_data/spi-ep93xx.h | 4 |
6 files changed, 48 insertions, 52 deletions
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 8e89ec8b6f0f..34e18e9556d9 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -29,6 +29,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/spi/spi.h> +#include <linux/gpio/machine.h> #include <sound/cs4271.h> @@ -105,13 +106,16 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = { }, }; -static int edb93xx_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO6, +static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - .chipselect = edb93xx_spi_chipselects, - .num_chipselect = ARRAY_SIZE(edb93xx_spi_chipselects), + /* Intentionally left blank */ }; static void __init edb93xx_register_spi(void) @@ -123,6 +127,7 @@ static void __init edb93xx_register_spi(void) else if (machine_is_edb9315a()) edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14; + gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, ARRAY_SIZE(edb93xx_spi_board_info)); } diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 80ccb984d521..f0f38c0dba52 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -77,13 +77,15 @@ static struct spi_board_info simone_spi_devices[] __initdata = { * low between multi-message command blocks. From v1.4, it uses a GPIO instead. * v1.3 parts will still work, since the signal on SFRMOUT is automatic. */ -static int simone_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO1, +static struct gpiod_lookup_table simone_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info simone_spi_info __initdata = { - .chipselect = simone_spi_chipselects, - .num_chipselect = ARRAY_SIZE(simone_spi_chipselects), .use_dma = 1, }; @@ -113,6 +115,7 @@ static void __init simone_init_machine(void) ep93xx_register_i2c(simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); gpiod_add_lookup_table(&simone_mmc_spi_gpio_table); + gpiod_add_lookup_table(&simone_spi_cs_gpio_table); ep93xx_register_spi(&simone_spi_info, simone_spi_devices, ARRAY_SIZE(simone_spi_devices)); simone_register_audio(); diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 85b74ac943f0..a3a20c83c6b8 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -22,6 +22,7 @@ #include <linux/spi/mmc_spi.h> #include <linux/mmc/host.h> #include <linux/platform_data/spi-ep93xx.h> +#include <linux/gpio/machine.h> #include <mach/gpio-ep93xx.h> #include <mach/hardware.h> @@ -269,13 +270,15 @@ static struct spi_board_info bk3_spi_board_info[] __initdata = { * The all work is performed automatically by !SPI_FRAME (SFRM1) and * goes through CPLD */ -static int bk3_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_F(3), +static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info bk3_spi_master __initdata = { - .chipselect = bk3_spi_chipselects, - .num_chipselect = ARRAY_SIZE(bk3_spi_chipselects), .use_dma = 1, }; @@ -316,13 +319,17 @@ static struct spi_board_info ts72xx_spi_devices[] __initdata = { }, }; -static int ts72xx_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_F(2), /* DIO_17 */ +static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + /* DIO_17 */ + GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info ts72xx_spi_info __initdata = { - .chipselect = ts72xx_spi_chipselects, - .num_chipselect = ARRAY_SIZE(ts72xx_spi_chipselects), + /* Intentionally left blank */ }; static void __init ts72xx_init_machine(void) @@ -339,6 +346,7 @@ static void __init ts72xx_init_machine(void) if (board_is_ts7300()) platform_device_register(&ts73xx_fpga_device); #endif + gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, ARRAY_SIZE(ts72xx_spi_devices)); } @@ -398,6 +406,7 @@ static void __init bk3_init_machine(void) ep93xx_register_eth(&ts72xx_eth_data, 1); + gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, ARRAY_SIZE(bk3_spi_board_info)); diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 767ee64628dc..f95a644769e4 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -245,15 +245,17 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }, }; -static int vision_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO6, - EP93XX_GPIO_LINE_EGPIO7, - EP93XX_GPIO_LINE_G(2), +static struct gpiod_lookup_table vision_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info vision_spi_master __initdata = { - .chipselect = vision_spi_chipselects, - .num_chipselect = ARRAY_SIZE(vision_spi_chipselects), .use_dma = 1, }; @@ -295,6 +297,7 @@ static void __init vision_init_machine(void) ep93xx_register_i2c(vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); + gpiod_add_lookup_table(&vision_spi_cs_gpio_table); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, ARRAY_SIZE(vision_spi_board_info)); vision_register_i2s(); diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 79fc3940245a..47e39251bad9 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -28,7 +28,6 @@ #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/scatterlist.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/platform_data/dma-ep93xx.h> @@ -676,6 +675,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev) if (!master) return -ENOMEM; + master->use_gpio_descriptors = true; master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware; master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware; master->prepare_message = ep93xx_spi_prepare_message; @@ -683,31 +683,11 @@ static int ep93xx_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); - - master->num_chipselect = info->num_chipselect; - master->cs_gpios = devm_kcalloc(&master->dev, - master->num_chipselect, sizeof(int), - GFP_KERNEL); - if (!master->cs_gpios) { - error = -ENOMEM; - goto fail_release_master; - } - - for (i = 0; i < master->num_chipselect; i++) { - master->cs_gpios[i] = info->chipselect[i]; - - if (!gpio_is_valid(master->cs_gpios[i])) - continue; - - error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i], - GPIOF_OUT_INIT_HIGH, - "ep93xx-spi"); - if (error) { - dev_err(&pdev->dev, "could not request cs gpio %d\n", - master->cs_gpios[i]); - goto fail_release_master; - } - } + /* + * The SPI core will count the number of GPIO descriptors to figure + * out the number of chip selects available on the platform. + */ + master->num_chipselect = 0; platform_set_drvdata(pdev, master); diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h index eb16c6739ac2..b439f2a896e0 100644 --- a/include/linux/platform_data/spi-ep93xx.h +++ b/include/linux/platform_data/spi-ep93xx.h @@ -6,13 +6,9 @@ struct spi_device; /** * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @chipselect: array of gpio numbers to use as chip selects - * @num_chipselect: ARRAY_SIZE(chipselect) * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { - int *chipselect; - int num_chipselect; bool use_dma; }; |