diff options
| -rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/hideep.txt | 42 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/hideep.c | 1120 |
5 files changed, 1175 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt new file mode 100644 index 000000000000..121d9b7c79a2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -0,0 +1,42 @@ +* HiDeep Finger and Stylus touchscreen controller + +Required properties: +- compatible : must be "hideep,hideep-ts" +- reg : I2C slave address, (e.g. 0x6C). +- interrupt-parent : Interrupt controller to which the chip is connected. +- interrupts : Interrupt to which the chip is connected. + +Optional properties: +- vdd-supply : It is the controller supply for controlling + main voltage(3.3V) through the regulator. +- vid-supply : It is the controller supply for controlling + IO voltage(1.8V) through the regulator. +- reset-gpios : Define for reset gpio pin. + It is to use for reset IC. +- touchscreen-size-x : X axis size of touchscreen +- touchscreen-size-y : Y axis size of touchscreen +- linux,keycodes : Specifies an array of numeric keycode values to + be used for reporting button presses. The array can + contain up to 3 entries. + +Example: + +#include "dt-bindings/input/input.h" + +i2c@00000000 { + + /* ... */ + + touchscreen@6c { + compatible = "hideep,hideep-ts"; + reg = <0x6c>; + interrupt-parent = <&gpx1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&ldo15_reg>"; + vid-supply = <&ldo18_reg>; + reset-gpios = <&gpx1 5 0>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + linux,keycodes = <KEY_HOME>, <KEY_MENU>, <KEY_BACK>; + }; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 1afd298eddd7..138895e99508 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -137,6 +137,7 @@ gw Gateworks Corporation hannstar HannStar Display Corporation haoyu Haoyu Microelectronic Co. Ltd. hardkernel Hardkernel Co., Ltd +hideep HiDeep Inc. himax Himax Technologies, Inc. hisilicon Hisilicon Limited. hit Hitachi Ltd. diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 26a66bc7b2df..dbe33fc3a286 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -354,6 +354,17 @@ config TOUCHSCREEN_GOODIX To compile this driver as a module, choose M here: the module will be called goodix. +config TOUCHSCREEN_HIDEEP + tristate "HiDeep Touch IC" + depends on I2C + help + Say Y here if you have a touchscreen using HiDeep. + + If unsure, say N. + + To compile this driver as a moudle, choose M here : the + module will be called hideep_ts. + config TOUCHSCREEN_ILI210X tristate "Ilitek ILI210X based touchscreen" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 2fa458088e3b..d9a7024c8cd9 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o +obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o diff --git a/drivers/input/touchscreen/hideep.c b/drivers/input/touchscreen/hideep.c new file mode 100644 index 000000000000..fc080a7c2e1f --- /dev/null +++ b/drivers/input/touchscreen/hideep.c @@ -0,0 +1,1120 @@ +/* + * Copyright (C) 2012-2017 Hideep, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foudation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/firmware.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/i2c.h> +#include <linux/acpi.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/sysfs.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/regulator/consumer.h> +#include <asm/unaligned.h> + +#define HIDEEP_TS_NAME "HiDeep Touchscreen" +#define HIDEEP_I2C_NAME "hideep_ts" + +#define HIDEEP_MT_MAX 10 +#define HIDEEP_KEY_MAX 3 + +/* count(2) + touch data(100) + key data(6) */ +#define HIDEEP_MAX_EVENT 108UL + +#define HIDEEP_TOUCH_EVENT_INDEX 2 +#define HIDEEP_KEY_EVENT_INDEX 102 + +/* Touch & key event */ +#define HIDEEP_EVENT_ADDR 0x240 + +/* command list */ +#define HIDEEP_RESET_CMD 0x9800 + +/* event bit */ +#define HIDEEP_MT_RELEASED BIT(4) +#define HIDEEP_KEY_PRESSED BIT(7) +#define HIDEEP_KEY_FIRST_PRESSED BIT(8) +#define HIDEEP_KEY_PRESSED_MASK (HIDEEP_KEY_PRESSED | \ + HIDEEP_KEY_FIRST_PRESSED) + +#define HIDEEP_KEY_IDX_MASK 0x0f + +/* For NVM */ +#define HIDEEP_YRAM_BASE 0x40000000 +#define HIDEEP_PERIPHERAL_BASE 0x50000000 +#define HIDEEP_ESI_BASE (HIDEEP_PERIPHERAL_BASE + 0x00000000) +#define HIDEEP_FLASH_BASE (HIDEEP_PERIPHERAL_BASE + 0x01000000) +#define HIDEEP_SYSCON_BASE (HIDEEP_PERIPHERAL_BASE + 0x02000000) + +#define HIDEEP_SYSCON_MOD_CON (HIDEEP_SYSCON_BASE + 0x0000) +#define HIDEEP_SYSCON_SPC_CON (HIDEEP_SYSCON_BASE + 0x0004) +#define HIDEEP_SYSCON_CLK_CON (HIDEEP_SYSCON_BASE + 0x0008) +#define HIDEEP_SYSCON_CLK_ENA (HIDEEP_SYSCON_BASE + 0x000C) +#define HIDEEP_SYSCON_RST_CON (HIDEEP_SYSCON_BASE + 0x0010) +#define HIDEEP_SYSCON_WDT_CON (HIDEEP_SYSCON_BASE + 0x0014) +#define HIDEEP_SYSCON_WDT_CNT (HIDEEP_SYSCON_BASE + 0x0018) +#define HIDEEP_SYSCON_PWR_CON (HIDEEP_SYSCON_BASE + 0x0020) +#define HIDEEP_SYSCON_PGM_ID (HIDEEP_SYSCON_BASE + 0x00F4) + +#define HIDEEP_FLASH_CON (HIDEEP_FLASH_BASE + 0x0000) +#define HIDEEP_FLASH_STA (HIDEEP_FLASH_BASE + 0x0004) +#define HIDEEP_FLASH_CFG (HIDEEP_FLASH_BASE + 0x0008) +#define HIDEEP_FLASH_TIM (HIDEEP_FLASH_BASE + 0x000C) +#define HIDEEP_FLASH_CACHE_CFG (HIDEEP_FLASH_BASE + 0x0010) +#define HIDEEP_FLASH_PIO_SIG (HIDEEP_FLASH_BASE + 0x400000) + +#define HIDEEP_ESI_TX_INVALID (HIDEEP_ESI_BASE + 0x0008) + +#define HIDEEP_PERASE 0x00040000 +#define HIDEEP_WRONLY 0x00100000 + +#define HIDEEP_NVM_MASK_OFS 0x0000000C +#define HIDEEP_NVM_DEFAULT_PAGE 0 +#define HIDEEP_NVM_SFR_WPAGE 1 +#define HIDEEP_NVM_SFR_RPAGE 2 + +#define HIDEEP_PIO_SIG 0x00400000 +#define HIDEEP_PROT_MODE 0x03400000 + +#define HIDEEP_NVM_PAGE_SIZE 128 + +#define HIDEEP_DWZ_INFO 0x000002C0 + +struct hideep_event { + __le16 x; + __le16 y; + __le16 z; + u8 w; + u8 flag; + u8 type; + u8 index; +}; + +struct dwz_info { + __be32 code_start; + u8 code_crc[12]; + + __be32 c_code_start; + __be16 gen_ver; + __be16 c_code_len; + + __be32 vr_start; + __be16 rsv0; + __be16 vr_len; + + __be32 ft_start; + __be16 vr_version; + __be16 ft_len; + + __be16 core_ver; + __be16 boot_ver; + + __be16 release_ver; + __be16 custom_ver; + + u8 factory_id; + u8 panel_type; + u8 model_name[6]; + + __be16 extra_option; + __be16 product_code; + + __be16 vendor_id; + __be16 product_id; +}; + +struct pgm_packet { + struct { + u8 unused[3]; + u8 len; + __be32 addr; + } header; + __be32 payload[HIDEEP_NVM_PAGE_SIZE / sizeof(__be32)]; +}; + +#define HIDEEP_XFER_BUF_SIZE sizeof(struct pgm_packet) + +struct hideep_ts { + struct i2c_client *client; + struct input_dev *input_dev; + struct regmap *reg; + + struct touchscreen_properties prop; + + struct gpio_desc *reset_gpio; + + struct regulator *vcc_vdd; + struct regulator *vcc_vid; + + struct mutex dev_mutex; + + u32 tch_count; + u32 lpm_count; + + /* + * Data buffer to read packet from the device (contacts and key + * states). We align it on double-word boundary to keep word-sized + * fields in contact data and double-word-sized fields in program + * packet aligned. + */ + u8 xfer_buf[HIDEEP_XFER_BUF_SIZE] __aligned(4); + + int key_num; + u32 key_codes[HIDEEP_KEY_MAX]; + + struct dwz_info dwz_info; + + unsigned int fw_size; + u32 nvm_mask; +}; + +static int hideep_pgm_w_mem(struct hideep_ts *ts, u32 addr, + const __be32 *data, size_t count) +{ + struct pgm_packet *packet = (void *)ts->xfer_buf; + size_t len = count * sizeof(*data); + struct i2c_msg msg = { + .addr = ts->client->addr, + .len = len + sizeof(packet->header.len) + + sizeof(packet->header.addr), + .buf = &packet->header.len, + }; + int ret; + + if (len > HIDEEP_NVM_PAGE_SIZE) + return -EINVAL; + + packet->header.len = 0x80 | (count - 1); + packet->header.addr = cpu_to_be32(addr); + memcpy(packet->payload, data, len); + + ret = i2c_transfer(ts->client->adapter, &msg, 1); + if (ret != 1) + return ret < 0 ? ret : -EIO; + + return 0; +} + +static int hideep_pgm_r_mem(struct hideep_ts *ts, u32 addr, + __be32 *data, size_t count) +{ + struct pgm_packet *packet = (void *)ts->xfer_buf; + size_t len = count * sizeof(*data); + struct i2c_msg msg[] = { + { + .addr = ts->client->addr, + .len = sizeof(packet->header.len) + + sizeof(packet->header.addr), + .buf = &packet->header.len, + }, + { + .addr = ts->client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = (u8 *)data, + }, + }; + int ret; + + if (len > HIDEEP_NVM_PAGE_SIZE) + return -EINVAL; + + packet->header.len = count - 1; + packet->header.addr = cpu_to_be32(addr); + + ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) + return ret < 0 ? ret : -EIO; + + return 0; +} + +static int hideep_pgm_r_reg(struct hideep_ts *ts, u32 addr, u32 *val) +{ + __be32 data; + int error; + + error = hideep_pgm_r_mem(ts, addr, &data, 1); + if (error) { + dev_err(&ts->client->dev, + "read of register %#08x failed: %d\n", + addr, error); + return error; + } + + *val = be32_to_cpu(data); + return 0; +} + +static int hideep_pgm_w_reg(struct hideep_ts *ts, u32 addr, u32 val) +{ + __be32 data = cpu_to_be32(val); + int error; + + error = hideep_pgm_w_mem(ts, addr, &data, 1); + if (error) { + dev_err(&ts->client->dev, + "write to register %#08x (%#08x) failed: %d\n", + addr, val, error); + return error; + } + + return 0; +} + +#define SW_RESET_IN_PGM(clk) \ +{ \ + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CNT, (clk)); \ + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CON, 0x03); \ + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CON, 0x01); \ +} + +#define SET_FLASH_PIO(ce) \ + hideep_pgm_w_reg(ts, HIDEEP_FLASH_CON, \ + 0x01 | ((ce) << 1)) + +#define SET_PIO_SIG(x, y) \ + hideep_pgm_w_reg(ts, HIDEEP_FLASH_PIO_SIG + (x), (y)) + +#define SET_FLASH_HWCONTROL() \ + hideep_pgm_w_reg(ts, HIDEEP_FLASH_CON, 0x00) + +#define NVM_W_SFR(x, y) \ +{ \ + SET_FLASH_PIO(1); \ + SET_PIO_SIG(x, y); \ + SET_FLASH_PIO(0); \ +} + +static void hideep_pgm_set(struct hideep_ts *ts) +{ + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CON, 0x00); + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_SPC_CON, 0x00); + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_CLK_ENA, 0xFF); + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_CLK_CON, 0x01); + hideep_pgm_w_reg(ts, HIDEEP_SYSCON_PWR_CON, 0x01); + hideep_pgm_w_reg(ts, HIDEEP_FLASH_TIM, 0x03); + hideep_pgm_w_reg(ts, HIDEEP_FLASH_CACHE_CFG, 0x00); +} + +static int hideep_pgm_get_pattern(struct hideep_ts *ts, u32 *pattern) +{ + u16 p1 = 0xAF39; + u16 p2 = 0xDF9D; + int error; + + error = regmap_bulk_write(ts->reg, p1, &p2, 1); + if (error) { + dev_err(&ts->client->dev, + "%s: regmap_bulk_write() failed with %d\n", + __func__, error); + return error; + } + + usleep_range(1000, 1100); + + /* flush invalid Tx load register */ + error = hideep_pgm_w_reg(ts, HIDEEP_ESI_TX_INVALID, 0x01); + if (error) + return error; + + error = hideep_pgm_r_reg(ts, HIDEEP_SYSCON_PGM_ID, pattern); + if (error) + return error; + + return 0; +} + +static int hideep_enter_pgm(struct hideep_ts *ts) +{ + int retry_count = 10; + u32 pattern; + int error; + + while (retry_count--) { + error = hideep_pgm_get_pattern(ts, &pattern); + if (error) { + dev_err(&ts->client->dev, + "hideep_pgm_get_pattern failed: %d\n", error); + } else if (pattern != 0x39AF9DDF) { + dev_err(&ts->client->dev, "%s: bad pattern: %#08x\n", + __func__, pattern); + } else { + dev_dbg(&ts->client->dev, "found magic code"); + + hideep_pgm_set(ts); + usleep_range(1000, 1100); + + return 0; + } + } + + dev_err(&ts->client->dev, "failed to enter pgm mode\n"); + SW_RESET_IN_PGM(1000); + return -EIO; +} + +static void hideep_nvm_unlock(struct hideep_ts *ts) +{ + u32 unmask_code; + + hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_SFR_RPAGE); + hideep_pgm_r_reg(ts, 0x0000000C, &unmask_code); + hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_DEFAULT_PAGE); + + /* make it unprotected code */ + unmask_code &= ~HIDEEP_PROT_MODE; + + /* compare unmask code */ + if (unmask_code != ts->nvm_mask) + dev_warn(&ts->client->dev, + "read mask code different %#08x vs %#08x", + unmask_code, ts->nvm_mask); + + hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_SFR_WPAGE); + SET_FLASH_PIO(0); + + NVM_W_SFR(HIDEEP_NVM_MASK_OFS, ts->nvm_mask); + SET_FLASH_HWCONTROL(); + hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_DEFAULT_PAGE); +} + +static int hideep_check_status(struct hideep_ts *ts) +{ + int time_out = 100; + int status; + int error; + + while (time_out--) { + error = hideep_pgm_r_reg(ts, HIDEEP_FLASH_STA, &status); + if (!error && status) + return 0; + + usleep_range(1000, 1100); + } + + return -ETIMEDOUT; +} + +static int hideep_program_page(struct hideep_ts *ts, u32 addr, + const __be32 *ucode, size_t xfer_count) +{ + u32 val; + int error; + + error = hideep_check_status(ts); + if (error) + return -EBUSY; + + addr &= ~(HIDEEP_NVM_PAGE_SIZE - 1); + + SET_FLASH_PIO(0); + SET_FLASH_PIO(1); + + /* erase page */ + SET_PIO_SIG(HIDEEP_PERASE | addr, 0xFFFFFFFF); + + SET_FLASH_PIO(0); + + error = hideep_check_status(ts); + if (error) + return -EBUSY; + + /* write page */ + SET_FLASH_PIO(1); + + val = be32_to_cpu(ucode[0]); + SET_PIO_SIG(HIDEEP_WRONLY | addr, val); + + hideep_pgm_w_mem(ts, HIDEEP_FLASH_PIO_SIG | HIDEEP_WRONLY, + ucode, xfer_count); + + val = be32_to_cpu(ucode[xfer_count - 1]); + SET_PIO_SIG(124, val); + + SET_FLASH_PIO(0); + + usleep_range(1000, 1100); + + error = hideep_check_status(ts); + if (error) + return -EBUSY; + + SET_FLASH_HWCONTROL(); + + return 0; +} + +static int hideep_program_nvm(struct hideep_ts *ts, + const __be32 *ucode, size_t ucode_len) +{ + struct pgm_packet *packet_r = (void *)ts->xfer_buf; + __be32 *current_ucode = packet_r->payload; + size_t xfer_len; + size_t xfer_count; + u32 addr = 0; + int error; + + hideep_nvm_unlock(ts); + + while (ucode_len > 0) { + xfer_len = min_t(size_t, ucode_len, HIDEEP_NVM_PAGE_SIZE); + xfer_count = xfer_len / sizeof(*ucode); + + error = hideep_pgm_r_mem(ts, 0x00000000 + addr, + current_ucode, xfer_count); + if (error) { + dev_err(&ts->client->dev, + "%s: failed to read page at offset %#08x: %d\n", + __func__, addr, error); + return error; + } + + /* See if the page needs updating */ + if (memcmp(ucode, current_ucode, xfer_len)) { + error = hideep_program_page(ts, addr, + ucode, xfer_count); + if (error) { + dev_err(&ts->client->dev, + "%s: iwrite failure @%#08x: %d\n", + __func__, addr, error); + return error; + } + + usleep_range(1000, 1100); + } + + ucode += xfer_count; + addr += xfer_len; + ucode_len -= xfer_len; + } + + return 0; +} + +static int hideep_verify_nvm(struct hideep_ts *ts, + const __be32 *ucode, size_t ucode_len) +{ + struct pgm_packet *packet_r = (void *)ts->xfer_buf; + __be32 *current_ucode = packet_r->payload; + size_t xfer_len; + size_t xfer_count; + u32 addr = 0; + int i; + int error; + + while (ucode_len > 0) { + xfer_len = min_t(size_t, ucode_len, HIDEEP_NVM_PAGE_SIZE); + xfer_count = xfer_len / sizeof(*ucode); + + error = hideep_pgm_r_mem(ts, 0x00000000 + addr, + current_ucode, xfer_count); + if (error) { + dev_err(&ts->client->dev, + "%s: failed to read page at offset %#08x: %d\n", + __func__, addr, error); + return error; + } + + if (memcmp(ucode, current_ucode, xfer_len)) { + const u8 *ucode_bytes = (const u8 *)ucode; + const u8 *current_bytes = (const u8 *)current_ucode; + + for (i = 0; i < xfer_len; i++) + if (ucode_bytes[i] != current_bytes[i]) + dev_err(&ts->client->dev, + "%s: mismatch @%#08x: (%#02x vs %#02x)\n", + __func__, addr + i, + ucode_bytes[i], + current_bytes[i]); + + return -EIO; + } + + ucode += xfer_count; + addr += xfer_len; + ucode_len -= xfer_len; + } + + return 0; +} + +static int hideep_load_dwz(struct hideep_ts *ts) +{ + u16 product_code; + int error; + + error = hideep_enter_pgm(ts); + if (error) + return error; + + msleep(50); + + error = hideep_pgm_r_mem(ts, HIDEEP_DWZ_INFO, + (void *)&ts->dwz_info, + sizeof(ts->dwz_info) / sizeof(__be32)); + + SW_RESET_IN_PGM(10); + msleep(50); + + if (error) { + dev_err(&ts->client->dev, + "failed to fetch DWZ data: %d\n", error); + return error; + } + + product_code = be16_to_cpu(ts->dwz_info.product_code); + + switch (product_code & 0xF0) { + case 0x40: + dev_dbg(&ts->client->dev, "used crimson IC"); + ts->fw_size = 1024 * 48; + ts->nvm_mask = 0x00310000; + break; + case 0x60: + dev_dbg(&ts->client->dev, "used lime IC"); + ts->fw_size = 1024 * 64; + ts->nvm_mask = 0x0030027B; + break; + default: + dev_err(&ts->client->dev, "product code is wrong: %#04x", + product_code); + return -EINVAL; + } + + dev_dbg(&ts->client->dev, "firmware release version: %#04x", + be16_to_cpu(ts->dwz_info.release_ver)); + + return 0; +} + +static int hideep_flash_firmware(struct hideep_ts *ts, + const __be32 *ucode, size_t ucode_len) +{ + int retry_cnt = 3; + int error; + + while (retry_cnt--) { + error = hideep_program_nvm(ts, ucode, ucode_len); + if (!error) { + error = hideep_verify_nvm(ts, ucode, ucode_len); + if (!error) + return 0; + } + } + + return error; +} + +static int hideep_update_firmware(struct hideep_ts *ts, + const __be32 *ucode, size_t ucode_len) +{ + int error, error2; + + dev_dbg(&ts->client->dev, "starting firmware update"); + + /* enter program mode */ + error = hideep_enter_pgm(ts); + if (error) + return error; + + error = hideep_flash_firmware(ts, ucode, ucode_len); + if (error) + dev_err(&ts->client->dev, + "firmware update failed: %d\n", error); + else + dev_dbg(&ts->client->dev, "firmware updated successfully\n"); + + SW_RESET_IN_PGM(1000); + + error2 = hideep_load_dwz(ts); + if (error2) + dev_err(&ts->client->dev, + "failed to load dwz after firmware update: %d\n", + error2); + + return error ?: error2; +} + +static int hideep_power_on(struct hideep_ts *ts) +{ + int error = 0; + + error = regulator_enable(ts->vcc_vdd); + if (error) + dev_err(&ts->client->dev, + "failed to enable 'vdd' regulator: %d", error); + + usleep_range(999, 1000); + + error = regulator_enable(ts->vcc_vid); + if (error) + dev_err(&ts->client->dev, + "failed to enable 'vcc_vid' regulator: %d", + error); + + msleep(30); + + if (ts->reset_gpio) { + gpiod_set_value_cansleep(ts->reset_gpio, 0); + } else { + error = regmap_write(ts->reg, HIDEEP_RESET_CMD, 0x01); + if (error) + dev_err(&ts->client->dev, + "failed to send 'reset' command: %d\n", error); + } + + msleep(50); + + return error; +} + +static void hideep_power_off(void *data) +{ + struct hideep_ts *ts = data; + + if (ts->reset_gpio) + gpiod_set_value(ts->reset_gpio, 1); + + regulator_disable(ts->vcc_vid); + regulator_disable(ts->vcc_vdd); +} + +#define __GET_MT_TOOL_TYPE(type) ((type) == 0x01 ? MT_TOOL_FINGER : MT_TOOL_PEN) + +static void hideep_report_slot(struct input_dev *input, + const struct hideep_event *event) +{ + input_mt_slot(input, event->index & 0x0f); + input_mt_report_slot_state(input, + __GET_MT_TOOL_TYPE(event->type), + !(event->flag & HIDEEP_MT_RELEASED)); + if (!(event->flag & HIDEEP_MT_RELEASED)) { + input_report_abs(input, ABS_MT_POSITION_X, + le16_to_cpup(&event->x)); + input_report_abs(input, ABS_MT_POSITION_Y, + le16_to_cpup(&event->y)); + input_report_abs(input, ABS_MT_PRESSURE, + le16_to_cpup(&event->z)); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, event->w); + } +} + +static void hideep_parse_and_report(struct hideep_ts *ts) +{ + const struct hideep_event *events = + (void *)&ts->xfer_buf[HIDEEP_TOUCH_EVENT_INDEX]; + const u8 *keys = &ts->xfer_buf[HIDEEP_KEY_EVENT_INDEX]; + int touch_count = ts->xfer_buf[0]; + int key_count = ts->xfer_buf[1] & 0x0f; + int lpm_count = ts->xfer_buf[1] & 0xf0; + int i; + + /* get touch event count */ + dev_dbg(&ts->client->dev, "mt = %d, key = %d, lpm = %02x", + touch_count, key_count, lpm_count); + + touch_count = min(touch_count, HIDEEP_MT_MAX); + for (i = 0; i < touch_count; i++) + hideep_report_slot(ts->input_dev, events + i); + + key_count = min(key_count, HIDEEP_KEY_MAX); + for (i = 0; i < key_count; i++) { + u8 key_data = keys[i * 2]; + + input_report_key(ts->input_dev, + ts->key_codes[key_data & HIDEEP_KEY_IDX_MASK], + key_data & HIDEEP_KEY_PRESSED_MASK); + } + + input_mt_sync_frame(ts->input_dev); + input_sync(ts->input_dev); +} + +static irqreturn_t hideep_irq(int irq, void *handle) +{ + struct hideep_ts *ts = handle; + int error; + + BUILD_BUG_ON(HIDEEP_MAX_EVENT > HIDEEP_XFER_BUF_SIZE); + + error = regmap_bulk_read(ts->reg, HIDEEP_EVENT_ADDR, + ts->xfer_buf, HIDEEP_MAX_EVENT / 2); + if (error) { + dev_err(&ts->client->dev, "failed to read events: %d\n", error); + goto out; + } + + hideep_parse_and_report(ts); + +out: + return IRQ_HANDLED; +} + +static int hideep_get_axis_info(struct hideep_ts *ts) +{ + __le16 val[2]; + int error; + + error = regmap_bulk_read(ts->reg, 0x28, val, ARRAY_SIZE(val)); + if (error) + return error; + + ts->prop.max_x = le16_to_cpup(val); + ts->prop.max_y = le16_to_cpup(val + 1); + + dev_dbg(&ts->client->dev, "X: %d, Y: %d", + ts->prop.max_x, ts->prop.max_y); + + return 0; +} + +static int hideep_init_input(struct hideep_ts *ts) +{ + struct device *dev = &ts->client->dev; + int i; + int error; + + ts->input_dev = devm_input_allocate_device(dev); + if (!ts->input_dev) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + ts->input_dev->name = HIDEEP_TS_NAME; + ts->input_dev->id.bustype = BUS_I2C; + input_set_drvdata(ts->input_dev, ts); + + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y); + input_set_abs_params(ts->input_dev, ABS_MT_PRESSURE, 0, 65535, 0, 0); + input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(ts->input_dev, ABS_MT_TOOL_TYPE, + 0, MT_TOOL_MAX, 0, 0); + touchscreen_parse_properties(ts->input_dev, true, &ts->prop); + + if (ts->prop.max_x == 0 || ts->prop.max_y == 0) { + error = hideep_get_axis_info(ts); + if (error) + return error; + } + + error = input_mt_init_slots(ts->input_dev, HIDEEP_MT_MAX, + INPUT_MT_DIRECT); + if (error) + return error; + + ts->key_num = device_property_read_u32_array(dev, "linux,keycodes", + NULL, 0); + if (ts->key_num > HIDEEP_KEY_MAX) { + dev_err(dev, "too many keys defined: %d\n", + ts->key_num); + return -EINVAL; + } + + if (ts->key_num <= 0) { + dev_dbg(dev, + "missing or malformed 'linux,keycodes' property\n"); + } else { + error = device_property_read_u32_array(dev, "linux,keycodes", + ts->key_codes, + ts->key_num); + if (error) { + dev_dbg(dev, "failed to read keymap: %d", error); + return error; + } + + if (ts->key_num) { + ts->input_dev->keycode = ts->key_codes; + ts->input_dev->keycodesize = sizeof(ts->key_codes[0]); + ts->input_dev->keycodemax = ts->key_num; + + for (i = 0; i < ts->key_num; i++) + input_set_capability(ts->input_dev, EV_KEY, + ts->key_codes[i]); + } + } + + error = input_register_device(ts->input_dev); + if (error) { + dev_err(dev, "failed to register input device: %d", error); + return error; + } + + return 0; +} + +static ssize_t hideep_update_fw(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hideep_ts *ts = i2c_get_clientdata(client); + const struct firmware *fw_entry; + char *fw_name; + int mode; + int error; + + error = kstrtoint(buf, 0, &mode); + if (error) + return error; + + fw_name = kasprintf(GFP_KERNEL, "hideep_ts_%04x.bin", + be16_to_cpu(ts->dwz_info.product_id)); + if (!fw_name) + return -ENOMEM; + + error = request_firmware(&fw_entry, fw_name, dev); + if (error) { + dev_err(dev, "failed to request firmware %s: %d", + fw_name, error); + goto out_free_fw_name; + } + + if (fw_entry->size % sizeof(__be32)) { + dev_err(dev, "invalid firmware size %zu\n", fw_entry->size); + error = -EINVAL; + goto out_release_fw; + } + + if (fw_entry->size > ts->fw_size) { + dev_err(dev, "fw size (%zu) is too big (memory size %d)\n", + fw_entry->size, ts->fw_size); + error = -EFBIG; + goto out_release_fw; + } + + mutex_lock(&ts->dev_mutex); + disable_irq(client->irq); + + error = hideep_update_firmware(ts, (const __be32 *)fw_entry->data, + fw_entry->size); + + enable_irq(client->irq); + mutex_unlock(&ts->dev_mutex); + +out_release_fw: + release_firmware(fw_entry); +out_free_fw_name: + kfree(fw_name); + + return error ?: count; +} + +static ssize_t hideep_fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hideep_ts *ts = i2c_get_clientdata(client); + ssize_t len; + + mutex_lock(&ts->dev_mutex); + len = scnprintf(buf, PAGE_SIZE, "%04x\n", + be16_to_cpu(ts->dwz_info.release_ver)); + mutex_unlock(&ts->dev_mutex); + + return len; +} + +static ssize_t hideep_product_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hideep_ts *ts = i2c_get_clientdata(client); + ssize_t len; + + mutex_lock(&ts->dev_mutex); + len = scnprintf(buf, PAGE_SIZE, "%04x\n", + be16_to_cpu(ts->dwz_info.product_id)); + mutex_unlock(&ts->dev_mutex); + + return len; +} + +static DEVICE_ATTR(version, 0664, hideep_fw_version_show, NULL); +static DEVICE_ATTR(product_id, 0664, hideep_product_id_show, NULL); +static DEVICE_ATTR(update_fw, 0664, NULL, hideep_update_fw); + +static struct attribute *hideep_ts_sysfs_entries[] = { + &dev_attr_version.attr, + &dev_attr_product_id.attr, + &dev_attr_update_fw.attr, + NULL, +}; + +static const struct attribute_group hideep_ts_attr_group = { + .attrs = hideep_ts_sysfs_entries, +}; + +static int __maybe_unused hideep_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hideep_ts *ts = i2c_get_clientdata(client); + + disable_irq(client->irq); + hideep_power_off(ts); + + return 0; +} + +static int __maybe_unused hideep_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hideep_ts *ts = i2c_get_clientdata(client); + int error; + + error = hideep_power_on(ts); + if (error) { + dev_err(&client->dev, "power on failed"); + return error; + } + + enable_irq(client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(hideep_pm_ops, hideep_suspend, hideep_resume); + +static const struct regmap_config hideep_regmap_config = { + .reg_bits = 16, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .val_bits = 16, + .val_format_endian = REGMAP_ENDIAN_LITTLE, + .max_register = 0xffff, +}; + +static int hideep_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct hideep_ts *ts; + int error; + + /* check i2c bus */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "check i2c device error"); + return -ENODEV; + } + + if (client->irq <= 0) { + dev_err(&client->dev, "missing irq: %d\n", client->irq); + return -EINVAL; + } + + ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->client = client; + i2c_set_clientdata(client, ts); + mutex_init(&ts->dev_mutex); + + ts->reg = devm_regmap_init_i2c(client, &hideep_regmap_config); + if (IS_ERR(ts->reg)) { + error = PTR_ERR(ts->reg); + dev_err(&client->dev, + "failed to initialize regmap: %d\n", error); + return error; + } + + ts->vcc_vdd = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(ts->vcc_vdd)) + return PTR_ERR(ts->vcc_vdd); + + ts->vcc_vid = devm_regulator_get(&client->dev, "vid"); + if (IS_ERR(ts->vcc_vid)) + return PTR_ERR(ts->vcc_vid); + + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, + "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) + return PTR_ERR(ts->reset_gpio); + + error = hideep_power_on(ts); + if (error) { + dev_err(&client->dev, "power on failed: %d\n", error); + return error; + } + + error = devm_add_action_or_reset(&client->dev, hideep_power_off, ts); + if (error) + return error; + + error = hideep_load_dwz(ts); + if (error) { + dev_err(&client->dev, "failed to load dwz: %d", error); + return error; + } + + error = hideep_init_input(ts); + if (error) + return error; + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, hideep_irq, IRQF_ONESHOT, + client->name, ts); + if (error) { + dev_err(&client->dev, "failed to request irq %d: %d\n", + client->irq, error); + return error; + } + + error = devm_device_add_group(&client->dev, &hideep_ts_attr_group); + if (error) { + dev_err(&client->dev, + "failed to add sysfs attributes: %d\n", error); + return error; + } + + return 0; +} + +static const struct i2c_device_id hideep_i2c_id[] = { + { HIDEEP_I2C_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, hideep_i2c_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id hideep_acpi_id[] = { + { "HIDP0001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, hideep_acpi_id); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id hideep_match_table[] = { + { .compatible = "hideep,hideep-ts" }, + { } +}; +MODULE_DEVICE_TABLE(of, hideep_match_table); +#endif + +static struct i2c_driver hideep_driver = { + .driver = { + .name = HIDEEP_I2C_NAME, + .of_match_table = of_match_ptr(hideep_match_table), + .acpi_match_table = ACPI_PTR(hideep_acpi_id), + .pm = &hideep_pm_ops, + }, + .id_table = hideep_i2c_id, + .probe = hideep_probe, +}; + +module_i2c_driver(hideep_driver); + +MODULE_DESCRIPTION("Driver for HiDeep Touchscreen Controller"); +MODULE_AUTHOR("anthony.kim@hideep.com"); +MODULE_LICENSE("GPL v2"); |