diff options
| -rw-r--r-- | Documentation/vm/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/vm/memory-model.rst | 183 |
2 files changed, 184 insertions, 0 deletions
diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst index b58cc3bfe777..e8d943b21cf9 100644 --- a/Documentation/vm/index.rst +++ b/Documentation/vm/index.rst @@ -37,6 +37,7 @@ descriptions of data structures and algorithms. hwpoison hugetlbfs_reserv ksm + memory-model mmu_notifier numa overcommit-accounting diff --git a/Documentation/vm/memory-model.rst b/Documentation/vm/memory-model.rst new file mode 100644 index 000000000000..382f72ace1fc --- /dev/null +++ b/Documentation/vm/memory-model.rst @@ -0,0 +1,183 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _physical_memory_model: + +===================== +Physical Memory Model +===================== + +Physical memory in a system may be addressed in different ways. The +simplest case is when the physical memory starts at address 0 and +spans a contiguous range up to the maximal address. It could be, +however, that this range contains small holes that are not accessible +for the CPU. Then there could be several contiguous ranges at +completely distinct addresses. And, don't forget about NUMA, where +different memory banks are attached to different CPUs. + +Linux abstracts this diversity using one of the three memory models: +FLATMEM, DISCONTIGMEM and SPARSEMEM. Each architecture defines what +memory models it supports, what the default memory model is and +whether it is possible to manually override that default. + +.. note:: + At time of this writing, DISCONTIGMEM is considered deprecated, + although it is still in use by several architectures. + +All the memory models track the status of physical page frames using +:c:type:`struct page` arranged in one or more arrays. + +Regardless of the selected memory model, there exists one-to-one +mapping between the physical page frame number (PFN) and the +corresponding `struct page`. + +Each memory model defines :c:func:`pfn_to_page` and :c:func:`page_to_pfn` +helpers that allow the conversion from PFN to `struct page` and vice +versa. + +FLATMEM +======= + +The simplest memory model is FLATMEM. This model is suitable for +non-NUMA systems with contiguous, or mostly contiguous, physical +memory. + +In the FLATMEM memory model, there is a global `mem_map` array that +maps the entire physical memory. For most architectures, the holes +have entries in the `mem_map` array. The `struct page` objects +corresponding to the holes are never fully initialized. + +To allocate the `mem_map` array, architecture specific setup code +should call :c:func:`free_area_init_node` function or its convenience +wrapper :c:func:`free_area_init`. Yet, the mappings array is not +usable until the call to :c:func:`memblock_free_all` that hands all +the memory to the page allocator. + +If an architecture enables `CONFIG_ARCH_HAS_HOLES_MEMORYMODEL` option, +it may free parts of the `mem_map` array that do not cover the +actual physical pages. In such case, the architecture specific +:c:func:`pfn_valid` implementation should take the holes in the +`mem_map` into account. + +With FLATMEM, the conversion between a PFN and the `struct page` is +straightforward: `PFN - ARCH_PFN_OFFSET` is an index to the +`mem_map` array. + +The `ARCH_PFN_OFFSET` defines the first page frame number for +systems with physical memory starting at address different from 0. + +DISCONTIGMEM +============ + +The DISCONTIGMEM model treats the physical memory as a collection of +`nodes` similarly to how Linux NUMA support does. For each node Linux +constructs an independent memory management subsystem represented by +`struct pglist_data` (or `pg_data_t` for short). Among other +things, `pg_data_t` holds the `node_mem_map` array that maps +physical pages belonging to that node. The `node_start_pfn` field of +`pg_data_t` is the number of the first page frame belonging to that +node. + +The architecture setup code should call :c:func:`free_area_init_node` for +each node in the system to initialize the `pg_data_t` object and its +`node_mem_map`. + +Every `node_mem_map` behaves exactly as FLATMEM's `mem_map` - +every physical page frame in a node has a `struct page` entry in the +`node_mem_map` array. When DISCONTIGMEM is enabled, a portion of the +`flags` field of the `struct page` encodes the node number of the +node hosting that page. + +The conversion between a PFN and the `struct page` in the +DISCONTIGMEM model became slightly more complex as it has to determine +which node hosts the physical page and which `pg_data_t` object +holds the `struct page`. + +Architectures that support DISCONTIGMEM provide :c:func:`pfn_to_nid` +to convert PFN to the node number. The opposite conversion helper +:c:func:`page_to_nid` is generic as it uses the node number encoded in +page->flags. + +Once the node number is known, the PFN can be used to index +appropriate `node_mem_map` array to access the `struct page` and +the offset of the `struct page` from the `node_mem_map` plus +`node_start_pfn` is the PFN of that page. + +SPARSEMEM +========= + +SPARSEMEM is the most versatile memory model available in Linux and it +is the only memory model that supports several advanced features such +as hot-plug and hot-remove of the physical memory, alternative memory +maps for non-volatile memory devices and deferred initialization of +the memory map for larger systems. + +The SPARSEMEM model presents the physical memory as a collection of +sections. A section is represented with :c:type:`struct mem_section` +that contains `section_mem_map` that is, logically, a pointer to an +array of struct pages. However, it is stored with some other magic +that aids the sections management. The section size and maximal number +of section is specified using `SECTION_SIZE_BITS` and +`MAX_PHYSMEM_BITS` constants defined by each architecture that +supports SPARSEMEM. While `MAX_PHYSMEM_BITS` is an actual width of a +physical address that an architecture supports, the +`SECTION_SIZE_BITS` is an arbitrary value. + +The maximal number of sections is denoted `NR_MEM_SECTIONS` and +defined as + +.. math:: + + NR\_MEM\_SECTIONS = 2 ^ {(MAX\_PHYSMEM\_BITS - SECTION\_SIZE\_BITS)} + +The `mem_section` objects are arranged in a two-dimensional array +called `mem_sections`. The size and placement of this array depend +on `CONFIG_SPARSEMEM_EXTREME` and the maximal possible number of +sections: + +* When `CONFIG_SPARSEMEM_EXTREME` is disabled, the `mem_sections` + array is static and has `NR_MEM_SECTIONS` rows. Each row holds a + single `mem_section` object. +* When `CONFIG_SPARSEMEM_EXTREME` is enabled, the `mem_sections` + array is dynamically allocated. Each row contains PAGE_SIZE worth of + `mem_section` objects and the number of rows is calculated to fit + all the memory sections. + +The architecture setup code should call :c:func:`memory_present` for +each active memory range or use :c:func:`memblocks_present` or +:c:func:`sparse_memory_present_with_active_regions` wrappers to +initialize the memory sections. Next, the actual memory maps should be +set up using :c:func:`sparse_init`. + +With SPARSEMEM there are two possible ways to convert a PFN to the +corresponding `struct page` - a "classic sparse" and "sparse +vmemmap". The selection is made at build time and it is determined by +the value of `CONFIG_SPARSEMEM_VMEMMAP`. + +The classic sparse encodes the section number of a page in page->flags +and uses high bits of a PFN to access the section that maps that page +frame. Inside a section, the PFN is the index to the array of pages. + +The sparse vmemmap uses a virtually mapped memory map to optimize +pfn_to_page and page_to_pfn operations. There is a global `struct +page *vmemmap` pointer that points to a virtually contiguous array of +`struct page` objects. A PFN is an index to that array and the the +offset of the `struct page` from `vmemmap` is the PFN of that +page. + +To use vmemmap, an architecture has to reserve a range of virtual +addresses that will map the physical pages containing the memory +map and make sure that `vmemmap` points to that range. In addition, +the architecture should implement :c:func:`vmemmap_populate` method +that will allocate the physical memory and create page tables for the +virtual memory map. If an architecture does not have any special +requirements for the vmemmap mappings, it can use default +:c:func:`vmemmap_populate_basepages` provided by the generic memory +management. + +The virtually mapped memory map allows storing `struct page` objects +for persistent memory devices in pre-allocated storage on those +devices. This storage is represented with :c:type:`struct vmem_altmap` +that is eventually passed to vmemmap_populate() through a long chain +of function calls. The vmemmap_populate() implementation may use the +`vmem_altmap` along with :c:func:`altmap_alloc_block_buf` helper to +allocate memory map on the persistent memory device. |