diff options
| -rw-r--r-- | include/drm/drm_dsc.h | 342 |
1 files changed, 342 insertions, 0 deletions
diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h new file mode 100644 index 000000000000..78db4f61d01c --- /dev/null +++ b/include/drm/drm_dsc.h @@ -0,0 +1,342 @@ +/* SPDX-License-Identifier: MIT + * Copyright (C) 2018 Intel Corp. + * + * Authors: + * Manasi Navare <manasi.d.navare@intel.com> + */ + +#ifndef DRM_DSC_H_ +#define DRM_DSC_H_ + +#include <drm/drm_dp_helper.h> + +/* VESA Display Stream Compression DSC 1.2 constants */ +#define DSC_NUM_BUF_RANGES 15 + +/** + * struct picture_parameter_set - Represents 128 bytes of Picture Parameter Set + * + * The VESA DSC standard defines picture parameter set (PPS) which display + * stream compression encoders must communicate to decoders. + * The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in + * this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2. + * The PPS fields that span over more than a byte should be stored in Big Endian + * format. + */ +struct drm_dsc_picture_parameter_set { + /** + * @dsc_version: + * PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC + * PPS0[7:4] - dsc_version_major: Contains major version of DSC + */ + u8 dsc_version; + /** + * @pps_identifier: + * PPS1[7:0] - Application specific identifier that can be + * used to differentiate between different PPS tables. + */ + u8 pps_identifier; + /** + * @pps_reserved: + * PPS2[7:0]- RESERVED Byte + */ + u8 pps_reserved; + /** + * @pps_3: + * PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to + * generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits, + * 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits, + * 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2. + * PPS3[7:4] - bits_per_component: Bits per component for the original + * pixels of the encoded picture. + * 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2) + * 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also + * allowed only when dsc_minor_version = 0x2) + */ + u8 pps_3; + /** + * @pps_4: + * PPS4[1:0] -These are the most significant 2 bits of + * compressed BPP bits_per_pixel[9:0] syntax element. + * PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled + * PPS4[3] - simple_422: Indicates if decoder drops samples to + * reconstruct the 4:2:2 picture. + * PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is + * active. + * PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any + * groups in picture + * PPS4[7:6] - Reseved bits + */ + u8 pps_4; + /** + * @bits_per_pixel_low: + * PPS5[7:0] - This indicates the lower significant 8 bits of + * the compressed BPP bits_per_pixel[9:0] element. + */ + u8 bits_per_pixel_low; + /** + * @pic_height: + * PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows + * within the raster. + */ + __be16 pic_height; + /** + * @pic_width: + * PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within + * the raster. + */ + __be16 pic_width; + /** + * @slice_height: + * PPS10[7:0], PPS11[7:0] - Slice height in units of pixels. + */ + __be16 slice_height; + /** + * @slice_width: + * PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels. + */ + __be16 slice_width; + /** + * @chunk_size: + * PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks + * that are used for slice multiplexing. + */ + __be16 chunk_size; + /** + * @initial_xmit_delay_high: + * PPS16[1:0] - Most Significant two bits of initial transmission delay. + * It specifies the number of pixel times that the encoder waits before + * transmitting data from its rate buffer. + * PPS16[7:2] - Reserved + */ + u8 initial_xmit_delay_high; + /** + * @initial_xmit_delay_low: + * PPS17[7:0] - Least significant 8 bits of initial transmission delay. + */ + u8 initial_xmit_delay_low; + /** + * @initial_dec_delay: + * + * PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number + * of pixel times that the decoder accumulates data in its rate buffer + * before starting to decode and output pixels. + */ + __be16 initial_dec_delay; + /** + * @pps20_reserved: + * + * PPS20[7:0] - Reserved + */ + u8 pps20_reserved; + /** + * @initial_scale_value: + * PPS21[5:0] - Initial rcXformScale factor used at beginning + * of a slice. + * PPS21[7:6] - Reserved + */ + u8 initial_scale_value; + /** + * @scale_increment_interval: + * PPS22[7:0], PPS23[7:0] - Number of group times between incrementing + * the rcXformScale factor at end of a slice. + */ + __be16 scale_increment_interval; + /** + * @scale_decrement_interval_high: + * PPS24[3:0] - Higher 4 bits indicating number of group times between + * decrementing the rcXformScale factor at beginning of a slice. + * PPS24[7:4] - Reserved + */ + u8 scale_decrement_interval_high; + /** + * @scale_decrement_interval_low: + * PPS25[7:0] - Lower 8 bits of scale decrement interval + */ + u8 scale_decrement_interval_low; + /** + * @pps26_reserved: + * PPS26[7:0] + */ + u8 pps26_reserved; + /** + * @first_line_bpg_offset: + * PPS27[4:0] - Number of additional bits that are allocated + * for each group on first line of a slice. + * PPS27[7:5] - Reserved + */ + u8 first_line_bpg_offset; + /** + * @nfl_bpg_offset: + * PPS28[7:0], PPS29[7:0] - Number of bits including frac bits + * deallocated for each group for groups after the first line of slice. + */ + __be16 nfl_bpg_offset; + /** + * @slice_bpg_offset: + * PPS30, PPS31[7:0] - Number of bits that are deallocated for each + * group to enforce the slice constraint. + */ + __be16 slice_bpg_offset; + /** + * @initial_offset: + * PPS32,33[7:0] - Initial value for rcXformOffset + */ + __be16 initial_offset; + /** + * @final_offset: + * PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset + */ + __be16 final_offset; + /** + * @flatness_min_qp: + * PPS36[4:0] - Minimum QP at which flatness is signaled and + * flatness QP adjustment is made. + * PPS36[7:5] - Reserved + */ + u8 flatness_min_qp; + /** + * @flatness_max_qp: + * PPS37[4:0] - Max QP at which flatness is signalled and + * the flatness adjustment is made. + * PPS37[7:5] - Reserved + */ + u8 flatness_max_qp; + /** + * @rc_model_size: + * PPS38,39[7:0] - Number of bits within RC Model. + */ + __be16 rc_model_size; + /** + * @rc_edge_factor: + * PPS40[3:0] - Ratio of current activity vs, previous + * activity to determine presence of edge. + * PPS40[7:4] - Reserved + */ + u8 rc_edge_factor; + /** + * @rc_quant_incr_limit0: + * PPS41[4:0] - QP threshold used in short term RC + * PPS41[7:5] - Reserved + */ + u8 rc_quant_incr_limit0; + /** + * @rc_quant_incr_limit1: + * PPS42[4:0] - QP threshold used in short term RC + * PPS42[7:5] - Reserved + */ + u8 rc_quant_incr_limit1; + /** + * @rc_tgt_offset: + * PPS43[3:0] - Lower end of the variability range around the target + * bits per group that is allowed by short term RC. + * PPS43[7:4]- Upper end of the variability range around the target + * bits per group that i allowed by short term rc. + */ + u8 rc_tgt_offset; + /** + * @rc_buf_thresh: + * PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for + * the 15 ranges defined by 14 thresholds. + */ + u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1]; + /** + * @rc_range_parameters: + * PPS58[7:0] - PPS87[7:0] + * Parameters that correspond to each of the 15 ranges. + */ + __be16 rc_range_parameters[DSC_NUM_BUF_RANGES]; + /** + * @native_422_420: + * PPS88[0] - 0 = Native 4:2:2 not used + * 1 = Native 4:2:2 used + * PPS88[1] - 0 = Native 4:2:0 not use + * 1 = Native 4:2:0 used + * PPS88[7:2] - Reserved 6 bits + */ + u8 native_422_420; + /** + * @second_line_bpg_offset: + * PPS89[4:0] - Additional bits/group budget for the + * second line of a slice in Native 4:2:0 mode. + * Set to 0 if DSC minor version is 1 or native420 is 0. + * PPS89[7:5] - Reserved + */ + u8 second_line_bpg_offset; + /** + * @nsl_bpg_offset: + * PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated + * for each group that is not in the second line of a slice. + */ + __be16 nsl_bpg_offset; + /** + * @second_line_offset_adj: + * PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second + * line in Native 4:2:0 mode. + */ + __be16 second_line_offset_adj; + /** + * @pps_long_94_reserved: + * PPS 94, 95, 96, 97 - Reserved + */ + u32 pps_long_94_reserved; + /** + * @pps_long_98_reserved: + * PPS 98, 99, 100, 101 - Reserved + */ + u32 pps_long_98_reserved; + /** + * @pps_long_102_reserved: + * PPS 102, 103, 104, 105 - Reserved + */ + u32 pps_long_102_reserved; + /** + * @pps_long_106_reserved: + * PPS 106, 107, 108, 109 - reserved + */ + u32 pps_long_106_reserved; + /** + * @pps_long_110_reserved: + * PPS 110, 111, 112, 113 - reserved + */ + u32 pps_long_110_reserved; + /** + * @pps_long_114_reserved: + * PPS 114 - 117 - reserved + */ + u32 pps_long_114_reserved; + /** + * @pps_long_118_reserved: + * PPS 118 - 121 - reserved + */ + u32 pps_long_118_reserved; + /** + * @pps_long_122_reserved: + * PPS 122- 125 - reserved + */ + u32 pps_long_122_reserved; + /** + * @pps_short_126_reserved: + * PPS 126, 127 - reserved + */ + __be16 pps_short_126_reserved; +} __packed; + +/** + * struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter + * Set Metadata + * + * This structure represents the DSC PPS infoframe required to send the Picture + * Parameter Set metadata required before enabling VESA Display Stream + * Compression. This is based on the DP Secondary Data Packet structure and + * comprises of SDP Header as defined in drm_dp_helper.h and PPS payload. + * + * @pps_header: Header for PPS as per DP SDP header format + * @pps_payload: PPS payload fields as per DSC specification Table 4-1 + */ +struct drm_dsc_pps_infoframe { + struct dp_sdp_header pps_header; + struct drm_dsc_picture_parameter_set pps_payload; +} __packed; + +#endif /* _DRM_DSC_H_ */ |