diff options
| -rw-r--r-- | arch/cris/arch-v10/kernel/kgdb.c | 257 |
1 files changed, 2 insertions, 255 deletions
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 0e799073498d..22d846bfc570 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -341,16 +341,6 @@ static int consistency_status = SUCCESS; in order to provide access mainly for 'g', 'G' and 'P'. */ -#ifdef PROCESS_SUPPORT -/* Need two task id pointers in order to handle Hct and Hgt commands. */ -static int current_thread_c = 0; -static int current_thread_g = 0; - -/* Need two register images in order to handle Hct and Hgt commands. The - variable reg_g is in addition to cris_reg above. */ -static registers reg_g; -#endif /* PROCESS_SUPPORT */ - /********************************** Breakpoint *******************************/ /* Use an internal stack in the breakpoint and interrupt response routines */ #define INTERNAL_STACK_SIZE 1024 @@ -608,55 +598,6 @@ putDebugString (const unsigned char *str, int length) } /********************************* Register image ****************************/ -#ifdef PROCESS_SUPPORT -/* Copy the content of a register image into another. The size n is - the size of the register image. Due to struct assignment generation of - memcpy in libc. */ -static void -copy_registers (registers *dptr, registers *sptr, int n) -{ - unsigned char *dreg; - unsigned char *sreg; - - for (dreg = (unsigned char*)dptr, sreg = (unsigned char*)sptr; n > 0; n--) - *dreg++ = *sreg++; -} - -/* Copy the stored registers from the stack. Put the register contents - of thread thread_id in the struct reg. */ -static void -copy_registers_from_stack (int thread_id, registers *regptr) -{ - int j; - stack_registers *s = (stack_registers *)stack_list[thread_id]; - unsigned int *d = (unsigned int *)regptr; - - for (j = 13; j >= 0; j--) - *d++ = s->r[j]; - regptr->sp = (unsigned int)stack_list[thread_id]; - regptr->pc = s->pc; - regptr->dccr = s->dccr; - regptr->srp = s->srp; -} - -/* Copy the registers to the stack. Put the register contents of thread - thread_id from struct reg to the stack. */ -static void -copy_registers_to_stack (int thread_id, registers *regptr) -{ - int i; - stack_registers *d = (stack_registers *)stack_list[thread_id]; - unsigned int *s = (unsigned int *)regptr; - - for (i = 0; i < 14; i++) { - d->r[i] = *s++; - } - d->pc = regptr->pc; - d->dccr = regptr->dccr; - d->srp = regptr->srp; -} -#endif - /* Write a value to a specified register in the register image of the current thread. Returns status code SUCCESS, E02 or E05. */ static int @@ -692,40 +633,6 @@ write_register (int regno, char *val) return status; } -#ifdef PROCESS_SUPPORT -/* Write a value to a specified register in the stack of a thread other - than the current thread. Returns status code SUCCESS or E07. */ -static int -write_stack_register (int thread_id, int regno, char *valptr) -{ - int status = SUCCESS; - stack_registers *d = (stack_registers *)stack_list[thread_id]; - unsigned int val; - - hex2mem ((unsigned char *)&val, valptr, sizeof(unsigned int)); - if (regno >= R0 && regno < SP) { - d->r[regno] = val; - } - else if (regno == SP) { - stack_list[thread_id] = val; - } - else if (regno == PC) { - d->pc = val; - } - else if (regno == SRP) { - d->srp = val; - } - else if (regno == DCCR) { - d->dccr = val; - } - else { - /* Do not support registers in the current thread. */ - status = E07; - } - return status; -} -#endif - /* Read a value from a specified register in the register image. Returns the value in the register or -1 for non-implemented registers. Should check consistency_status after a call which may be E05 after changes @@ -811,26 +718,6 @@ stub_is_stopped(int sigval) } -#ifdef PROCESS_SUPPORT - /* Store the registers of the executing thread. Assume that both step, - continue, and register content requests are with respect to this - thread. The executing task is from the operating system scheduler. */ - - current_thread_c = executing_task; - current_thread_g = executing_task; - - /* A struct assignment translates into a libc memcpy call. Avoid - all libc functions in order to prevent recursive break points. */ - copy_registers (®_g, &cris_reg, sizeof(registers)); - - /* Store thread:r...; with the executing task TID. */ - gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:"); - pos += gdb_cris_strlen ("thread:"); - remcomOutBuffer[pos++] = hex_asc_hi(executing_task); - remcomOutBuffer[pos++] = hex_asc_lo(executing_task); - gdb_cris_strcpy (&remcomOutBuffer[pos], ";"); -#endif - /* null-terminate and send it off */ *ptr = 0; @@ -865,19 +752,7 @@ handle_exception (int sigval) in a register are in the same order the machine uses. Failure: void. */ - { -#ifdef PROCESS_SUPPORT - /* Use the special register content in the executing thread. */ - copy_registers (®_g, &cris_reg, sizeof(registers)); - /* Replace the content available on the stack. */ - if (current_thread_g != executing_task) { - copy_registers_from_stack (current_thread_g, ®_g); - } - mem2hex ((unsigned char *)remcomOutBuffer, (unsigned char *)®_g, sizeof(registers)); -#else - mem2hex(remcomOutBuffer, (char *)&cris_reg, sizeof(registers)); -#endif - } + mem2hex(remcomOutBuffer, (char *)&cris_reg, sizeof(registers)); break; case 'G': @@ -885,17 +760,7 @@ handle_exception (int sigval) Each byte of register data is described by two hex digits. Success: OK Failure: void. */ -#ifdef PROCESS_SUPPORT - hex2mem ((unsigned char *)®_g, &remcomInBuffer[1], sizeof(registers)); - if (current_thread_g == executing_task) { - copy_registers (&cris_reg, ®_g, sizeof(registers)); - } - else { - copy_registers_to_stack(current_thread_g, ®_g); - } -#else hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)); -#endif gdb_cris_strcpy (remcomOutBuffer, "OK"); break; @@ -911,12 +776,7 @@ handle_exception (int sigval) char *suffix; int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16); int status; -#ifdef PROCESS_SUPPORT - if (current_thread_g != executing_task) - status = write_stack_register (current_thread_g, regno, suffix+1); - else -#endif - status = write_register (regno, suffix+1); + status = write_register (regno, suffix+1); switch (status) { case E02: @@ -1051,119 +911,6 @@ handle_exception (int sigval) Not supported: E04 */ gdb_cris_strcpy (remcomOutBuffer, error_message[E04]); break; -#ifdef PROCESS_SUPPORT - - case 'T': - /* Thread alive. TXX - Is thread XX alive? - Success: OK, thread XX is alive. - Failure: E03, thread XX is dead. */ - { - int thread_id = (int)gdb_cris_strtol (&remcomInBuffer[1], 0, 16); - /* Cannot tell whether it is alive or not. */ - if (thread_id >= 0 && thread_id < number_of_tasks) - gdb_cris_strcpy (remcomOutBuffer, "OK"); - } - break; - - case 'H': - /* Set thread for subsequent operations: Hct - c = 'c' for thread used in step and continue; - t can be -1 for all threads. - c = 'g' for thread used in other operations. - t = 0 means pick any thread. - Success: OK - Failure: E01 */ - { - int thread_id = gdb_cris_strtol (&remcomInBuffer[2], 0, 16); - if (remcomInBuffer[1] == 'c') { - /* c = 'c' for thread used in step and continue */ - /* Do not change current_thread_c here. It would create a mess in - the scheduler. */ - gdb_cris_strcpy (remcomOutBuffer, "OK"); - } - else if (remcomInBuffer[1] == 'g') { - /* c = 'g' for thread used in other operations. - t = 0 means pick any thread. Impossible since the scheduler does - not allow that. */ - if (thread_id >= 0 && thread_id < number_of_tasks) { - current_thread_g = thread_id; - gdb_cris_strcpy (remcomOutBuffer, "OK"); - } - else { - /* Not expected - send an error message. */ - gdb_cris_strcpy (remcomOutBuffer, error_message[E01]); - } - } - else { - /* Not expected - send an error message. */ - gdb_cris_strcpy (remcomOutBuffer, error_message[E01]); - } - } - break; - - case 'q': - case 'Q': - /* Query of general interest. qXXXX - Set general value XXXX. QXXXX=yyyy */ - { - int pos; - int nextpos; - int thread_id; - - switch (remcomInBuffer[1]) { - case 'C': - /* Identify the remote current thread. */ - gdb_cris_strcpy (&remcomOutBuffer[0], "QC"); - remcomOutBuffer[2] = hex_asc_hi(current_thread_c); - remcomOutBuffer[3] = hex_asc_lo(current_thread_c); - remcomOutBuffer[4] = '\0'; - break; - case 'L': - gdb_cris_strcpy (&remcomOutBuffer[0], "QM"); - /* Reply with number of threads. */ - if (os_is_started()) { - remcomOutBuffer[2] = hex_asc_hi(number_of_tasks); - remcomOutBuffer[3] = hex_asc_lo(number_of_tasks); - } - else { - remcomOutBuffer[2] = hex_asc_hi(0); - remcomOutBuffer[3] = hex_asc_lo(1); - } - /* Done with the reply. */ - remcomOutBuffer[4] = hex_asc_lo(1); - pos = 5; - /* Expects the argument thread id. */ - for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++) - remcomOutBuffer[pos] = remcomInBuffer[pos]; - /* Reply with the thread identifiers. */ - if (os_is_started()) { - /* Store the thread identifiers of all tasks. */ - for (thread_id = 0; thread_id < number_of_tasks; thread_id++) { - nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; - for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = hex_asc_lo(0); - remcomOutBuffer[pos++] = hex_asc_lo(thread_id); - } - } - else { - /* Store the thread identifier of the boot task. */ - nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; - for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = hex_asc_lo(0); - remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c); - } - remcomOutBuffer[pos] = '\0'; - break; - default: - /* Not supported: "" */ - /* Request information about section offsets: qOffsets. */ - remcomOutBuffer[0] = 0; - break; - } - } - break; -#endif /* PROCESS_SUPPORT */ default: /* The stub should ignore other request and send an empty |