diff options
-rw-r--r-- | drivers/net/wireless/b43/b43.h | 14 | ||||
-rw-r--r-- | drivers/net/wireless/b43/dma.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/b43/main.c | 56 | ||||
-rw-r--r-- | drivers/net/wireless/b43/main.h | 1 | ||||
-rw-r--r-- | drivers/net/wireless/b43/pio.c | 2 |
5 files changed, 61 insertions, 14 deletions
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 75aede02f932..f580c2812d91 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -163,6 +163,7 @@ enum { #define B43_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */ #define B43_SHM_SH_PCTLWDPOS 0x0008 #define B43_SHM_SH_RXPADOFF 0x0034 /* RX Padding data offset (PIO only) */ +#define B43_SHM_SH_FWCAPA 0x0042 /* Firmware capabilities (Opensource firmware only) */ #define B43_SHM_SH_PHYVER 0x0050 /* PHY version */ #define B43_SHM_SH_PHYTYPE 0x0052 /* PHY type */ #define B43_SHM_SH_ANTSWAP 0x005C /* Antenna swap threshold */ @@ -297,6 +298,10 @@ enum { #define B43_HF_MLADVW 0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */ #define B43_HF_PR45960W 0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */ +/* Firmware capabilities field in SHM (Opensource firmware only) */ +#define B43_FWCAPA_HWCRYPTO 0x0001 +#define B43_FWCAPA_QOS 0x0002 + /* MacFilter offsets. */ #define B43_MACFILTER_SELF 0x0000 #define B43_MACFILTER_BSSID 0x0003 @@ -596,6 +601,13 @@ struct b43_wl { /* Pointer to the ieee80211 hardware data structure */ struct ieee80211_hw *hw; + /* The number of queues that were registered with the mac80211 subsystem + * initially. This is a backup copy of hw->queues in case hw->queues has + * to be dynamically lowered at runtime (Firmware does not support QoS). + * hw->queues has to be restored to the original value before unregistering + * from the mac80211 subsystem. */ + u16 mac80211_initially_registered_queues; + struct mutex mutex; spinlock_t irq_lock; /* R/W lock for data transmission. @@ -749,6 +761,8 @@ struct b43_wldev { bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */ bool radio_hw_enable; /* saved state of radio hardware enabled state */ bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */ + bool qos_enabled; /* TRUE, if QoS is used. */ + bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ /* PHY/Radio device. */ struct b43_phy phy; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index eae680b53052..7964cc32b258 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev, { struct b43_dmaring *ring; - if (b43_modparam_qos) { + if (dev->qos_enabled) { /* 0 = highest priority */ switch (queue_prio) { default: diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 5d9f1981f2ce..6456afebdba1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -80,8 +80,8 @@ static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -int b43_modparam_qos = 1; -module_param_named(qos, b43_modparam_qos, int, 0444); +static int modparam_qos = 1; +module_param_named(qos, modparam_qos, int, 0444); MODULE_PARM_DESC(qos, "Enable QOS support (default on)"); static int modparam_btcoex = 1; @@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev, u64 value) b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi); } +/* Read the firmware capabilities bitmask (Opensource firmware only) */ +static u16 b43_fwcapa_read(struct b43_wldev *dev) +{ + B43_WARN_ON(!dev->fw.opensource); + return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA); +} + void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) { u32 low, high; @@ -2307,12 +2314,34 @@ static int b43_upload_microcode(struct b43_wldev *dev) dev->fw.patch = fwpatch; dev->fw.opensource = (fwdate == 0xFFFF); + /* Default to use-all-queues. */ + dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues; + dev->qos_enabled = !!modparam_qos; + /* Default to firmware/hardware crypto acceleration. */ + dev->hwcrypto_enabled = 1; + if (dev->fw.opensource) { + u16 fwcapa; + /* Patchlevel info is encoded in the "time" field. */ dev->fw.patch = fwtime; - b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n", - dev->fw.rev, dev->fw.patch, - dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : ""); + b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n", + dev->fw.rev, dev->fw.patch); + + fwcapa = b43_fwcapa_read(dev); + if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) { + b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n"); + /* Disable hardware crypto and fall back to software crypto. */ + dev->hwcrypto_enabled = 0; + } + if (!(fwcapa & B43_FWCAPA_QOS)) { + b43info(dev->wl, "QoS not supported by firmware\n"); + /* Disable QoS. Tweak hw->queues to 1. It will be restored before + * ieee80211_unregister to make sure the networking core can + * properly free possible resources. */ + dev->wl->hw->queues = 1; + dev->qos_enabled = 0; + } } else { b43info(dev->wl, "Loading firmware version %u.%u " "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", @@ -3627,7 +3656,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) goto out_unlock; - if (dev->fw.pcm_request_failed) { + if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) { /* We don't have firmware for the crypto engine. * Must use software-crypto. */ err = -EOPNOTSUPP; @@ -4727,6 +4756,7 @@ static int b43_wireless_init(struct ssb_device *dev) b43err(NULL, "Could not allocate ieee80211 device\n"); goto out; } + wl = hw_to_b43_wl(hw); /* fill hw info */ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | @@ -4740,7 +4770,8 @@ static int b43_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); - hw->queues = b43_modparam_qos ? 4 : 1; + hw->queues = modparam_qos ? 4 : 1; + wl->mac80211_initially_registered_queues = hw->queues; hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) @@ -4748,9 +4779,7 @@ static int b43_wireless_init(struct ssb_device *dev) else SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); - /* Get and initialize struct b43_wl */ - wl = hw_to_b43_wl(hw); - memset(wl, 0, sizeof(*wl)); + /* Initialize struct b43_wl */ wl->hw = hw; spin_lock_init(&wl->irq_lock); rwlock_init(&wl->tx_lock); @@ -4816,8 +4845,13 @@ static void b43_remove(struct ssb_device *dev) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); - if (wl->current_dev == wldev) + if (wl->current_dev == wldev) { + /* Restore the queues count before unregistering, because firmware detect + * might have modified it. Restoring is important, so the networking + * stack can properly free resources. */ + wl->hw->queues = wl->mac80211_initially_registered_queues; ieee80211_unregister_hw(wl->hw); + } b43_one_core_detach(dev); diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index 40abcf5d1b43..950fb1b0546d 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -39,7 +39,6 @@ #define PAD_BYTES(nr_bytes) P4D_BYTES( __LINE__ , (nr_bytes)) -extern int b43_modparam_qos; extern int b43_modparam_verbose; /* Logmessage verbosity levels. Update the b43_modparam_verbose helptext, if diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 8cd9776752e6..69138e8c1db6 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_queue_by_priority(struct b43_wldev *dev, { struct b43_pio_txqueue *q; - if (b43_modparam_qos) { + if (dev->qos_enabled) { /* 0 = highest priority */ switch (queue_prio) { default: |