diff options
41 files changed, 1282 insertions, 371 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 4256a6df9b79..aad527b357a0 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -7,6 +7,9 @@ Required properties: - interrupts : Should contain CSPI/eCSPI interrupt - fsl,spi-num-chipselects : Contains the number of the chipselect - cs-gpios : Specifies the gpio pins to be used for chipselects. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "tx" and "rx" if present. Example: @@ -19,4 +22,6 @@ ecspi@70010000 { fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */ <&gpio3 25 0>; /* GPIO3_25 */ + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index f24baf3b6cc1..d11c3721e7cd 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -6,8 +6,17 @@ Required properties: "renesas,sh-mobile-msiof" for SH Mobile series. Examples with soctypes are: "renesas,msiof-r8a7790" (R-Car H2) - "renesas,msiof-r8a7791" (R-Car M2) -- reg : Offset and length of the register set for the device + "renesas,msiof-r8a7791" (R-Car M2-W) + "renesas,msiof-r8a7792" (R-Car V2H) + "renesas,msiof-r8a7793" (R-Car M2-N) + "renesas,msiof-r8a7794" (R-Car E2) +- reg : A list of offsets and lengths of the register sets for + the device. + If only one register set is present, it is to be used + by both the CPU and the DMA engine. + If two register sets are present, the first is to be + used by the CPU, and the second is to be used by the + DMA engine. - interrupt-parent : The phandle for the interrupt controller that services interrupts for this device - interrupts : Interrupt specifier @@ -17,12 +26,16 @@ Required properties: Optional properties: - clocks : Must contain a reference to the functional clock. - num-cs : Total number of chip-selects (default is 1) +- dmas : Must contain a list of two references to DMA + specifiers, one for transmission, and one for + reception. +- dma-names : Must contain a list of two DMA names, "tx" and "rx". Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words (default is 64) - renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64, or 256 on R-Car H2 and M2) + (default is 64, or 256 on R-Car Gen2) Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. @@ -31,9 +44,11 @@ Example: msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index f80887bca0d6..12ecfe9e3599 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -1,5 +1,10 @@ Davinci SPI controller device bindings +Links on DM: +Keystone 2 - http://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf +dm644x - http://www.ti.com/lit/ug/sprue32a/sprue32a.pdf +OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf + Required properties: - #address-cells: number of cells required to define a chip select address on the SPI bus. Should be set to 1. @@ -24,6 +29,30 @@ Optional: cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>; where first three are internal CS and last two are GPIO CS. +Optional properties for slave devices: +SPI slave nodes can contain the following properties. +Not all SPI Peripherals from Texas Instruments support this. +Please check SPI peripheral documentation for a device before using these. + +- ti,spi-wdelay : delay between transmission of words + (SPIFMTn.WDELAY, SPIDAT1.WDEL) must be specified in number of SPI module + clock periods. + + delay = WDELAY * SPI_module_clock_period + 2 * SPI_module_clock_period + +Below is timing diagram which shows functional meaning of +"ti,spi-wdelay" parameter. + + +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +SPI_CLK | | | | | | | | | | | | | | | | + +----------+ +-+ +-+ +-+ +-+ +---------------------------+ +-+ +-+ +- + +SPI_SOMI/SIMO+-----------------+ +----------- + +----------+ word1 +---------------------------+word2 + +-----------------+ +----------- + WDELAY + <--------------------------> + Example of a NOR flash slave device (n25q032) connected to DaVinci SPI controller device over the SPI bus. @@ -43,6 +72,7 @@ spi0:spi@20BF0000 { compatible = "st,m25p32"; spi-max-frequency = <25000000>; reg = <0>; + ti,spi-wdelay = <8>; partition@0 { label = "u-boot-spl"; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 5376de40f10b..cbbe16ed3874 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -10,7 +10,12 @@ Required properties: - pinctrl-names: must contain a "default" entry. - spi-num-chipselects : the number of the chipselect signals. - bus-num : the slave chip chipselect signal number. -- big-endian : if DSPI modudle is big endian, the bool will be set in node. + +Optional property: +- big-endian: If present the dspi device's registers are implemented + in big endian mode, otherwise in native mode(same with CPU), for more + detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. + Example: dspi0@4002c000 { diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index a3ff50fc76fb..50c3a3de61c1 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -1,7 +1,7 @@ Marvell Orion SPI device Required properties: -- compatible : should be "marvell,orion-spi". +- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi". - reg : offset and length of the register set for the device - cell-index : Which of multiple SPI controllers is this. Optional properties: diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index d57d82a74054..8f4169f63936 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt @@ -11,7 +11,10 @@ Required properties: - "renesas,rspi-sh7757" (SH) - "renesas,rspi-r7s72100" (RZ/A1H) - "renesas,qspi-r8a7790" (R-Car H2) - - "renesas,qspi-r8a7791" (R-Car M2) + - "renesas,qspi-r8a7791" (R-Car M2-W) + - "renesas,qspi-r8a7792" (R-Car V2H) + - "renesas,qspi-r8a7793" (R-Car M2-N) + - "renesas,qspi-r8a7794" (R-Car E2) - reg : Address start and address range size of the device - interrupts : A list of interrupt-specifiers, one for each entry in interrupt-names. @@ -30,6 +33,9 @@ Required properties: Optional properties: - clocks : Must contain a reference to the functional clock. +- dmas : Must contain a list of two references to DMA specifiers, + one for transmission, and one for reception. +- dma-names : Must contain a list of two DMA names, "tx" and "rx". Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. @@ -58,4 +64,6 @@ Examples: num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; }; diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 7982bcc4d151..d29734bff28c 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -601,13 +601,13 @@ THANKS TO Contributors to Linux-SPI discussions include (in alphabetical order, by last name): +Mark Brown David Brownell Russell King +Grant Likely Dmitry Pervushin Stephen Street Mark Underwood Andrew Victor -Vitaly Wool -Grant Likely -Mark Brown Linus Walleij +Vitaly Wool diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 62e2242ad7e0..84e7c9e6ccef 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -69,6 +69,7 @@ config SPI_ATH79 config SPI_ATMEL tristate "Atmel SPI Controller" + depends on HAS_DMA depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) help This selects a driver for the Atmel SPI Controller, present on @@ -112,6 +113,14 @@ config SPI_AU1550 If you say yes to this option, support will be included for the PSC SPI controller found on Au1550, Au1200 and Au1300 series. +config SPI_BCM53XX + tristate "Broadcom BCM53xx SPI controller" + depends on ARCH_BCM_5301X + depends on BCMA_POSSIBLE + select BCMA + help + Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs. + config SPI_BCM63XX tristate "Broadcom BCM63xx SPI controller" depends on BCM63XX @@ -185,6 +194,7 @@ config SPI_EFM32 config SPI_EP93XX tristate "Cirrus Logic EP93xx SPI controller" + depends on HAS_DMA depends on ARCH_EP93XX || COMPILE_TEST help This enables using the Cirrus EP93xx SPI controller in master @@ -314,6 +324,7 @@ config SPI_OMAP_UWIRE config SPI_OMAP24XX tristate "McSPI driver for OMAP" + depends on HAS_DMA depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SUPERH depends on ARCH_OMAP2PLUS || COMPILE_TEST help @@ -380,7 +391,7 @@ config SPI_PXA2XX additional documentation can be found a Documentation/spi/pxa2xx. config SPI_PXA2XX_PCI - def_tristate SPI_PXA2XX && PCI + def_tristate SPI_PXA2XX && PCI && COMMON_CLK config SPI_ROCKCHIP tristate "Rockchip SPI controller driver" @@ -500,7 +511,7 @@ config SPI_MXS config SPI_TEGRA114 tristate "NVIDIA Tegra114 SPI Controller" depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST - depends on RESET_CONTROLLER + depends on RESET_CONTROLLER && HAS_DMA help SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller is different than the older SoCs SPI controller and also register interface @@ -518,7 +529,7 @@ config SPI_TEGRA20_SFLASH config SPI_TEGRA20_SLINK tristate "Nvidia Tegra20/Tegra30 SLINK Controller" depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST - depends on RESET_CONTROLLER + depends on RESET_CONTROLLER && HAS_DMA help SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface. @@ -591,7 +602,7 @@ config SPI_DW_PCI depends on SPI_DESIGNWARE && PCI config SPI_DW_MID_DMA - bool "DMA support for DW SPI controller on Intel Moorestown platform" + bool "DMA support for DW SPI controller on Intel MID platform" depends on SPI_DW_PCI && INTEL_MID_DMAC config SPI_DW_MMIO diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 762da0741148..78f24ca36fcf 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o +obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c new file mode 100644 index 000000000000..17b34cbadc03 --- /dev/null +++ b/drivers/spi/spi-bcm53xx.c @@ -0,0 +1,299 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/bcma/bcma.h> +#include <linux/spi/spi.h> + +#include "spi-bcm53xx.h" + +#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */ + +/* The longest observed required wait was 19 ms */ +#define BCM53XXSPI_SPE_TIMEOUT_MS 80 + +struct bcm53xxspi { + struct bcma_device *core; + struct spi_master *master; + + size_t read_offset; +}; + +static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset) +{ + return bcma_read32(b53spi->core, offset); +} + +static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset, + u32 value) +{ + bcma_write32(b53spi->core, offset, value); +} + +static inline unsigned int bcm53xxspi_calc_timeout(size_t len) +{ + /* Do some magic calculation based on length and buad. Add 10% and 1. */ + return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1; +} + +static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms) +{ + unsigned long deadline; + u32 tmp; + + /* SPE bit has to be 0 before we read MSPI STATUS */ + deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000; + do { + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); + if (!(tmp & B53SPI_MSPI_SPCR2_SPE)) + break; + udelay(5); + } while (!time_after_eq(jiffies, deadline)); + + if (tmp & B53SPI_MSPI_SPCR2_SPE) + goto spi_timeout; + + /* Check status */ + deadline = jiffies + timeout_ms * HZ / 1000; + do { + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS); + if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) { + bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); + return 0; + } + + cpu_relax(); + udelay(100); + } while (!time_after_eq(jiffies, deadline)); + +spi_timeout: + bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); + + pr_err("Timeout waiting for SPI to be ready!\n"); + + return -EBUSY; +} + +static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf, + size_t len, bool cont) +{ + u32 tmp; + int i; + + for (i = 0; i < len; i++) { + /* Transmit Register File MSB */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2), + (unsigned int)w_buf[i]); + } + + for (i = 0; i < len; i++) { + tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | + B53SPI_CDRAM_PCS_DSCK; + if (!cont && i == len - 1) + tmp &= ~B53SPI_CDRAM_CONT; + tmp &= ~0x1; + /* Command Register File */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); + } + + /* Set queue pointers */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); + bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1); + + if (cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); + + /* Start SPI transfer */ + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); + tmp |= B53SPI_MSPI_SPCR2_SPE; + if (cont) + tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; + bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); + + /* Wait for SPI to finish */ + bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); + + if (!cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); + + b53spi->read_offset = len; +} + +static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf, + size_t len, bool cont) +{ + u32 tmp; + int i; + + for (i = 0; i < b53spi->read_offset + len; i++) { + tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | + B53SPI_CDRAM_PCS_DSCK; + if (!cont && i == b53spi->read_offset + len - 1) + tmp &= ~B53SPI_CDRAM_CONT; + tmp &= ~0x1; + /* Command Register File */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); + } + + /* Set queue pointers */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); + bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, + b53spi->read_offset + len - 1); + + if (cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); + + /* Start SPI transfer */ + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); + tmp |= B53SPI_MSPI_SPCR2_SPE; + if (cont) + tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; + bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); + + /* Wait for SPI to finish */ + bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); + + if (!cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); + + for (i = 0; i < len; ++i) { + int offset = b53spi->read_offset + i; + + /* Data stored in the transmit register file LSB */ + r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2)); + } + + b53spi->read_offset = 0; +} + +static int bcm53xxspi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *t) +{ + struct bcm53xxspi *b53spi = spi_master_get_devdata(master); + u8 *buf; + size_t left; + + if (t->tx_buf) { + buf = (u8 *)t->tx_buf; + left = t->len; + while (left) { + size_t to_write = min_t(size_t, 16, left); + bool cont = left - to_write > 0; + + bcm53xxspi_buf_write(b53spi, buf, to_write, cont); + left -= to_write; + buf += to_write; + } + } + + if (t->rx_buf) { + buf = (u8 *)t->rx_buf; + left = t->len; + while (left) { + size_t to_read = min_t(size_t, 16 - b53spi->read_offset, + left); + bool cont = left - to_read > 0; + + bcm53xxspi_buf_read(b53spi, buf, to_read, cont); + left -= to_read; + buf += to_read; + } + } + + return 0; +} + +/************************************************** + * BCMA + **************************************************/ + +static struct spi_board_info bcm53xx_info = { + .modalias = "bcm53xxspiflash", +}; + +static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl); + +static int bcm53xxspi_bcma_probe(struct bcma_device *core) +{ + struct bcm53xxspi *b53spi; + struct spi_master *master; + int err; + + if (core->bus->drv_cc.core->id.rev != 42) { + pr_err("SPI on SoC with unsupported ChipCommon rev\n"); + return -ENOTSUPP; + } + + master = spi_alloc_master(&core->dev, sizeof(*b53spi)); + if (!master) + return -ENOMEM; + + b53spi = spi_master_get_devdata(master); + b53spi->master = master; + b53spi->core = core; + + master->transfer_one = bcm53xxspi_transfer_one; + + bcma_set_drvdata(core, b53spi); + + err = devm_spi_register_master(&core->dev, master); + if (err) { + spi_master_put(master); + bcma_set_drvdata(core, NULL); + goto out; + } + + /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */ + spi_new_device(master, &bcm53xx_info); + +out: + return err; +} + +static void bcm53xxspi_bcma_remove(struct bcma_device *core) +{ + struct bcm53xxspi *b53spi = bcma_get_drvdata(core); + + spi_unregister_master(b53spi->master); +} + +static struct bcma_driver bcm53xxspi_bcma_driver = { + .name = KBUILD_MODNAME, + .id_table = bcm53xxspi_bcma_tbl, + .probe = bcm53xxspi_bcma_probe, + .remove = bcm53xxspi_bcma_remove, +}; + +/************************************************** + * Init & exit + **************************************************/ + +static int __init bcm53xxspi_module_init(void) +{ + int err = 0; + + err = bcma_driver_register(&bcm53xxspi_bcma_driver); + if (err) + pr_err("Failed to register bcma driver: %d\n", err); + + return err; +} + +static void __exit bcm53xxspi_module_exit(void) +{ + bcma_driver_unregister(&bcm53xxspi_bcma_driver); +} + +module_init(bcm53xxspi_module_init); +module_exit(bcm53xxspi_module_exit); + +MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver"); +MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-bcm53xx.h b/drivers/spi/spi-bcm53xx.h new file mode 100644 index 000000000000..73575dfe6916 --- /dev/null +++ b/drivers/spi/spi-bcm53xx.h @@ -0,0 +1,72 @@ +#ifndef SPI_BCM53XX_H +#define SPI_BCM53XX_H + +#define B53SPI_BSPI_REVISION_ID 0x000 +#define B53SPI_BSPI_SCRATCH 0x004 +#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008 +#define B53SPI_BSPI_BUSY_STATUS 0x00c +#define B53SPI_BSPI_INTR_STATUS 0x010 +#define B53SPI_BSPI_B0_STATUS 0x014 +#define B53SPI_BSPI_B0_CTRL 0x018 +#define B53SPI_BSPI_B1_STATUS 0x01c +#define B53SPI_BSPI_B1_CTRL 0x020 +#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024 +#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028 +#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c +#define B53SPI_BSPI_BITS_PER_PHASE 0x030 +#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034 +#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038 +#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c +#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040 +#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044 +#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048 +#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c + +/* RAF */ +#define B53SPI_RAF_START_ADDR 0x100 +#define B53SPI_RAF_NUM_WORDS 0x104 +#define B53SPI_RAF_CTRL 0x108 +#define B53SPI_RAF_FULLNESS 0x10c +#define B53SPI_RAF_WATERMARK 0x110 +#define B53SPI_RAF_STATUS 0x114 +#define B53SPI_RAF_READ_DATA 0x118 +#define B53SPI_RAF_WORD_CNT 0x11c +#define B53SPI_RAF_CURR_ADDR 0x120 + +/* MSPI */ +#define B53SPI_MSPI_SPCR0_LSB 0x200 +#define B53SPI_MSPI_SPCR0_MSB 0x204 +#define B53SPI_MSPI_SPCR1_LSB 0x208 +#define B53SPI_MSPI_SPCR1_MSB 0x20c +#define B53SPI_MSPI_NEWQP 0x210 +#define B53SPI_MSPI_ENDQP 0x214 +#define B53SPI_MSPI_SPCR2 0x218 +#define B53SPI_MSPI_SPCR2_SPE 0x00000040 +#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080 +#define B53SPI_MSPI_MSPI_STATUS 0x220 +#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001 +#define B53SPI_MSPI_CPTQP 0x224 +#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */ +#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */ +#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */ +#define B53SPI_CDRAM_PCS_PCS0 0x00000001 +#define B53SPI_CDRAM_PCS_PCS1 0x00000002 +#define B53SPI_CDRAM_PCS_PCS2 0x00000004 +#define B53SPI_CDRAM_PCS_PCS3 0x00000008 +#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f +#define B53SPI_CDRAM_PCS_DSCK 0x00000010 +#define B53SPI_CDRAM_BITSE 0x00000040 +#define B53SPI_CDRAM_CONT 0x00000080 +#define B53SPI_MSPI_WRITE_LOCK 0x380 +#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384 + +/* Interrupt */ +#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0 +#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4 +#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8 +#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac +#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0 +#define B53SPI_INTR_MSPI_DONE 0x3b4 +#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8 + +#endif /* SPI_BCM53XX_H */ diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 562ff83debd9..7b811e38c7ad 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -677,7 +677,6 @@ static struct platform_driver cdns_spi_driver = { .remove = cdns_spi_remove, .driver = { .name = CDNS_SPI_NAME, - .owner = THIS_MODULE, .of_match_table = cdns_spi_of_match, .pm = &cdns_spi_dev_pm_ops, }, diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index ce538dad526b..181cf2262006 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -30,7 +30,6 @@ struct spi_clps711x_data { void __iomem *syncio; struct regmap *syscon; - struct regmap *syscon1; struct clk *spi_clk; u8 *tx_buf; @@ -47,27 +46,6 @@ static int spi_clps711x_setup(struct spi_device *spi) return 0; } -static void spi_clps711x_setup_xfer(struct spi_device *spi, - struct spi_transfer *xfer) -{ - struct spi_master *master = spi->master; - struct spi_clps711x_data *hw = spi_master_get_devdata(master); - - /* Setup SPI frequency divider */ - if (xfer->speed_hz >= master->max_speed_hz) - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(3)); - else if (xfer->speed_hz >= (master->max_speed_hz / 2)) - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(2)); - else if (xfer->speed_hz >= (master->max_speed_hz / 8)) - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(1)); - else - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(0)); -} - static int spi_clps711x_prepare_message(struct spi_master *master, struct spi_message *msg) { @@ -87,7 +65,7 @@ static int spi_clps711x_transfer_one(struct spi_master *master, struct spi_clps711x_data *hw = spi_master_get_devdata(master); u8 data; - spi_clps711x_setup_xfer(spi, xfer); + clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz); hw->len = xfer->len; hw->bpw = xfer->bits_per_word; @@ -176,13 +154,11 @@ static int spi_clps711x_probe(struct platform_device *pdev) } } - hw->spi_clk = devm_clk_get(&pdev->dev, "spi"); + hw->spi_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(hw->spi_clk)) { - dev_err(&pdev->dev, "Can't get clocks\n"); ret = PTR_ERR(hw->spi_clk); goto err_out; } - master->max_speed_hz = clk_get_rate(hw->spi_clk); hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3"); if (IS_ERR(hw->syscon)) { @@ -190,12 +166,6 @@ static int spi_clps711x_probe(struct platform_device *pdev) goto err_out; } - hw->syscon1 = syscon_regmap_lookup_by_pdevname("syscon.1"); - if (IS_ERR(hw->syscon1)) { - ret = PTR_ERR(hw->syscon1); - goto err_out; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hw->syncio = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hw->syncio)) { diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 134fb6eb7b19..63700ab7bd9f 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -65,6 +65,7 @@ /* SPIDAT1 (upper 16 bit defines) */ #define SPIDAT1_CSHOLD_MASK BIT(12) +#define SPIDAT1_WDEL BIT(10) /* SPIGCR1 */ #define SPIGCR1_CLKMOD_MASK BIT(1) @@ -167,8 +168,10 @@ static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi) static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) { u32 data = 0; + if (dspi->tx) { const u8 *tx = dspi->tx; + data = *tx++; dspi->tx = tx; } @@ -178,8 +181,10 @@ static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi) { u32 data = 0; + if (dspi->tx) { const u16 *tx = dspi->tx; + data = *tx++; dspi->tx = tx; } @@ -209,6 +214,7 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) { struct davinci_spi *dspi; struct davinci_spi_platform_data *pdata; + struct davinci_spi_config *spicfg = spi->controller_data; u8 chip_sel = spi->chip_select; u16 spidat1 = CS_DEFAULT; bool gpio_chipsel = false; @@ -223,6 +229,10 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) gpio = spi->cs_gpio; } + /* program delay transfers if tx_delay is non zero */ + if (spicfg->wdelay) + spidat1 |= SPIDAT1_WDEL; + /* * Board specific chip select logic decides the polarity and cs * line for the controller @@ -237,9 +247,9 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) spidat1 |= SPIDAT1_CSHOLD_MASK; spidat1 &= ~(0x1 << chip_sel); } - - iowrite16(spidat1, dspi->base + SPIDAT1 + 2); } + + iowrite16(spidat1, dspi->base + SPIDAT1 + 2); } /** @@ -285,7 +295,7 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, int prescale; dspi = spi_master_get_devdata(spi->master); - spicfg = (struct davinci_spi_config *)spi->controller_data; + spicfg = spi->controller_data; if (!spicfg) spicfg = &davinci_spi_default_cfg; @@ -333,6 +343,14 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, spifmt |= SPIFMT_PHASE_MASK; /* + * Assume wdelay is used only on SPI peripherals that has this field + * in SPIFMTn register and when it's configured from board file or DT. + */ + if (spicfg->wdelay) + spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) + & SPIFMT_WDELAY_MASK); + + /* * Version 1 hardware supports two basic SPI modes: * - Standard SPI mode uses 4 pins, with chipselect * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) @@ -349,9 +367,6 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, u32 delay = 0; - spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) - & SPIFMT_WDELAY_MASK); - if (spicfg->odd_parity) spifmt |= SPIFMT_ODD_PARITY_MASK; @@ -383,6 +398,26 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, return 0; } +static int davinci_spi_of_setup(struct spi_device *spi) +{ + struct davinci_spi_config *spicfg = spi->controller_data; + struct device_node *np = spi->dev.of_node; + u32 prop; + + if (spicfg == NULL && np) { + spicfg = kzalloc(sizeof(*spicfg), GFP_KERNEL); + if (!spicfg) + return -ENOMEM; + *spicfg = davinci_spi_default_cfg; + /* override with dt configured values */ + if (!of_property_read_u32(np, "ti,spi-wdelay", &prop)) + spicfg->wdelay = (u8)prop; + spi->controller_data = spicfg; + } + + return 0; +} + /** * davinci_spi_setup - This functions will set default transfer method * @spi: spi device on which data transfer to be done @@ -433,7 +468,16 @@ static int davinci_spi_setup(struct spi_device *spi) else clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); - return retval; + return davinci_spi_of_setup(spi); +} + +static void davinci_spi_cleanup(struct spi_device *spi) +{ + struct davinci_spi_config *spicfg = spi->controller_data; + + spi->controller_data = NULL; + if (spi->dev.of_node) + kfree(spicfg); } static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) @@ -947,6 +991,7 @@ static int davinci_spi_probe(struct platform_device *pdev) master->num_chipselect = pdata->num_chipselect; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16); master->setup = davinci_spi_setup; + master->cleanup = davinci_spi_cleanup; dspi->bitbang.chipselect = davinci_spi_chipselect; dspi->bitbang.setup_transfer = davinci_spi_setup_transfer; @@ -996,8 +1041,8 @@ static int davinci_spi_probe(struct platform_device *pdev) goto free_clk; dev_info(&pdev->dev, "DMA: supported\n"); - dev_info(&pdev->dev, "DMA: RX channel: %pa, TX channel: %pa, " - "event queue: %d\n", &dma_rx_chan, &dma_tx_chan, + dev_info(&pdev->dev, "DMA: RX channel: %pa, TX channel: %pa, event queue: %d\n", + &dma_rx_chan, &dma_tx_chan, pdata->dma_event_q); } diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 6d207afec8cb..46c6d58e1fda 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -1,7 +1,7 @@ /* * Special handling for DW core on Intel MID platform * - * Copyright (c) 2009, Intel Corporation. + * Copyright (c) 2009, 2014 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -11,10 +11,6 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, - * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ #include <linux/dma-mapping.h> @@ -39,22 +35,25 @@ static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) { struct dw_spi *dws = param; - return dws->dmac && (&dws->dmac->dev == chan->device->dev); + return dws->dma_dev == chan->device->dev; } static int mid_spi_dma_init(struct dw_spi *dws) { struct mid_dma *dw_dma = dws->dma_priv; + struct pci_dev *dma_dev; struct intel_mid_dma_slave *rxs, *txs; dma_cap_mask_t mask; /* * Get pci device for DMA controller, currently it could only - * be the DMA controller of either Moorestown or Medfield + * be the DMA controller of Medfield */ - dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL); - if (!dws->dmac) - dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); + dma_dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); + if (!dma_dev) + return -ENODEV; + + dws->dma_dev = &dma_dev->dev; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -83,13 +82,18 @@ static int mid_spi_dma_init(struct dw_spi *dws) free_rxchan: dma_release_channel(dws->rxchan); err_exit: - return -1; - + return -EBUSY; } static void mid_spi_dma_exit(struct dw_spi *dws) { + if (!dws->dma_inited) + return; + + dmaengine_terminate_all(dws->txchan); dma_release_channel(dws->txchan); + + dmaengine_terminate_all(dws->rxchan); dma_release_channel(dws->rxchan); } @@ -109,8 +113,7 @@ static void dw_spi_dma_done(void *arg) static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) { - struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL; - struct dma_chan *txchan, *rxchan; + struct dma_async_tx_descriptor *txdesc, *rxdesc; struct dma_slave_config txconf, rxconf; u16 dma_ctrl = 0; @@ -120,37 +123,34 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) dw_writew(dws, DW_SPI_DMARDLR, 0xf); dw_writew(dws, DW_SPI_DMATDLR, 0x10); if (dws->tx_dma) - dma_ctrl |= 0x2; + dma_ctrl |= SPI_DMA_TDMAE; if (dws->rx_dma) - dma_ctrl |= 0x1; + dma_ctrl |= SPI_DMA_RDMAE; dw_writew(dws, DW_SPI_DMACR, dma_ctrl); spi_enable_chip(dws, 1); } dws->dma_chan_done = 0; - txchan = dws->txchan; - rxchan = dws->rxchan; /* 2. Prepare the TX dma transfer */ txconf.direction = DMA_MEM_TO_DEV; txconf.dst_addr = dws->dma_addr; txconf.dst_maxburst = LNW_DMA_MSIZE_16; txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + txconf.dst_addr_width = dws->dma_width; txconf.device_fc = false; - txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, - (unsigned long) &txconf); + dmaengine_slave_config(dws->txchan, &txconf); memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); dws->tx_sgl.dma_address = dws->tx_dma; dws->tx_sgl.length = dws->len; - txdesc = dmaengine_prep_slave_sg(txchan, + txdesc = dmaengine_prep_slave_sg(dws->txchan, &dws->tx_sgl, 1, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); txdesc->callback = dw_spi_dma_done; txdesc->callback_param = dws; @@ -159,27 +159,30 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxconf.src_addr = dws->dma_addr; rxconf.src_maxburst = LNW_DMA_MSIZE_16; rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + rxconf.src_addr_width = dws->dma_width; rxconf.device_fc = false; - rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, - (unsigned long) &rxconf); + dmaengine_slave_config(dws->rxchan, &rxconf); memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); dws->rx_sgl.dma_address = dws->rx_dma; dws->rx_sgl.length = dws->len; - rxdesc = dmaengine_prep_slave_sg(rxchan, + rxdesc = dmaengine_prep_slave_sg(dws->rxchan, &dws->rx_sgl, 1, DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); rxdesc->callback = dw_spi_dma_done; rxdesc->callback_param = dws; /* rx must be started before tx due to spi instinct */ - rxdesc->tx_submit(rxdesc); - txdesc->tx_submit(txdesc); + dmaengine_submit(rxdesc); + dma_async_issue_pending(dws->rxchan); + + dmaengine_submit(txdesc); + dma_async_issue_pending(dws->txchan); + return 0; } @@ -190,7 +193,7 @@ static struct dw_spi_dma_ops mid_dma_ops = { }; #endif -/* Some specific info for SPI0 controller on Moorestown */ +/* Some specific info for SPI0 controller on Intel MID */ /* HW info for MRST CLk Control Unit, one 32b reg */ #define MRST_SPI_CLK_BASE 100000000 /* 100m */ diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index e14960470d8d..ba68da12cdf0 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -1,7 +1,7 @@ /* * PCI interface driver for DW SPI Core * - * Copyright (c) 2009, Intel Corporation. + * Copyright (c) 2009, 2014 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -11,10 +11,6 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, - * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ #include <linux/interrupt.h> @@ -32,17 +28,22 @@ struct dw_spi_pci { struct dw_spi dws; }; -static int spi_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) +struct spi_pci_desc { + int (*setup)(struct dw_spi *); +}; + +static struct spi_pci_desc spi_pci_mid_desc = { + .setup = dw_spi_mid_init, +}; + +static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct dw_spi_pci *dwpci; struct dw_spi *dws; + struct spi_pci_desc *desc = (struct spi_pci_desc *)ent->driver_data; int pci_bar = 0; int ret; - dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n", - pdev->vendor, pdev->device); - ret = pcim_enable_device(pdev); if (ret) return ret; @@ -58,7 +59,7 @@ static int spi_pci_probe(struct pci_dev *pdev, /* Get basic io resource and map it */ dws->paddr = pci_resource_start(pdev, pci_bar); - ret = pcim_iomap_regions(pdev, 1, dev_name(&pdev->dev)); + ret = pcim_iomap_regions(pdev, 1 << pci_bar, pci_name(pdev)); if (ret) return ret; @@ -69,11 +70,11 @@ static int spi_pci_probe(struct pci_dev *pdev, dws->irq = pdev->irq; /* - * Specific handling for Intel MID paltforms, like dma setup, + * Specific handling for paltforms, like dma setup, * clock rate, FIFO depth. */ - if (pdev->device == 0x0800) { - ret = dw_spi_mid_init(dws); + if (desc && desc->setup) { + ret = desc->setup(dws); if (ret) return ret; } @@ -85,6 +86,9 @@ static int spi_pci_probe(struct pci_dev *pdev, /* PCI hook and SPI hook use the same drv data */ pci_set_drvdata(pdev, dwpci); + dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + return 0; } @@ -95,41 +99,29 @@ static void spi_pci_remove(struct pci_dev *pdev) dw_spi_remove_host(&dwpci->dws); } -#ifdef CONFIG_PM -static int spi_suspend(struct pci_dev *pdev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int spi_suspend(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); - int ret; - ret = dw_spi_suspend_host(&dwpci->dws); - if (ret) - return ret; - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return ret; + return dw_spi_suspend_host(&dwpci->dws); } -static int spi_resume(struct pci_dev *pdev) +static int spi_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); - int ret; - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - ret = pci_enable_device(pdev); - if (ret) - return ret; return dw_spi_resume_host(&dwpci->dws); } -#else -#define spi_suspend NULL -#define spi_resume NULL #endif +static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume); + static const struct pci_device_id pci_ids[] = { /* Intel MID platform SPI controller 0 */ - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, + { PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&spi_pci_mid_desc}, {}, }; @@ -138,8 +130,9 @@ static struct pci_driver dw_spi_driver = { .id_table = pci_ids, .probe = spi_pci_probe, .remove = spi_pci_remove, - .suspend = spi_suspend, - .resume = spi_resume, + .driver = { + .pm = &dw_spi_pm_ops, + }, }; module_pci_driver(dw_spi_driver); diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 0dd0623319b0..729215885250 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -11,10 +11,6 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ #include <linux/dma-mapping.h> @@ -59,22 +55,20 @@ struct chip_data { #ifdef CONFIG_DEBUG_FS #define SPI_REGS_BUFSIZE 1024 -static ssize_t spi_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) +static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) { - struct dw_spi *dws; + struct dw_spi *dws = file->private_data; char *buf; u32 len = 0; ssize_t ret; - dws = file->private_data; - buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); if (!buf) return 0; len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "MRST SPI0 registers:\n"); + "%s registers:\n", dev_name(&dws->master->dev)); len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, "=================================\n"); len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, @@ -110,42 +104,41 @@ static ssize_t spi_show_regs(struct file *file, char __user *user_buf, len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, "=================================\n"); - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); kfree(buf); return ret; } -static const struct file_operations mrst_spi_regs_ops = { +static const struct file_operations dw_spi_regs_ops = { .owner = THIS_MODULE, .open = simple_open, - .read = spi_show_regs, + .read = dw_spi_show_regs, .llseek = default_llseek, }; -static int mrst_spi_debugfs_init(struct dw_spi *dws) +static int dw_spi_debugfs_init(struct dw_spi *dws) { - dws->debugfs = debugfs_create_dir("mrst_spi", NULL); + dws->debugfs = debugfs_create_dir("dw_spi", NULL); if (!dws->debugfs) return -ENOMEM; debugfs_create_file("registers", S_IFREG | S_IRUGO, - dws->debugfs, (void *)dws, &mrst_spi_regs_ops); + dws->debugfs, (void *)dws, &dw_spi_regs_ops); return 0; } -static void mrst_spi_debugfs_remove(struct dw_spi *dws) +static void dw_spi_debugfs_remove(struct dw_spi *dws) { - if (dws->debugfs) - debugfs_remove_recursive(dws->debugfs); + debugfs_remove_recursive(dws->debugfs); } #else -static inline int mrst_spi_debugfs_init(struct dw_spi *dws) +static inline int dw_spi_debugfs_init(struct dw_spi *dws) { return 0; } -static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) +static inline void dw_spi_debugfs_remove(struct dw_spi *dws) { } #endif /* CONFIG_DEBUG_FS */ @@ -177,7 +170,7 @@ static inline u32 rx_max(struct dw_spi *dws) { u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; - return min(rx_left, (u32)dw_readw(dws, DW_SPI_RXFLR)); + return min_t(u32, rx_left, dw_readw(dws, DW_SPI_RXFLR)); } static void dw_writer(struct dw_spi *dws) @@ -228,8 +221,9 @@ static void *next_transfer(struct dw_spi *dws) struct spi_transfer, transfer_list); return RUNNING_STATE; - } else - return DONE_STATE; + } + + return DONE_STATE; } /* @@ -396,7 +390,7 @@ static void pump_transfers(unsigned long data) goto early_exit; } - /* Delay if requested at end of transfer*/ + /* Delay if requested at end of transfer */ if (message->state == RUNNING_STATE) { previous = list_entry(transfer->transfer_list.prev, struct spi_transfer, @@ -471,10 +465,12 @@ static void pump_transfers(unsigned long data) */ if (!dws->dma_mapped && !chip->poll_mode) { int templen = dws->len / dws->n_bytes; + txint_level = dws->fifo_len / 2; txint_level = (templen > txint_level) ? txint_level : templen; - imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; + imask |= SPI_INT_TXEI | SPI_INT_TXOI | + SPI_INT_RXUI | SPI_INT_RXOI; dws->transfer_handler = interrupt_transfer; } @@ -515,7 +511,6 @@ static void pump_transfers(unsigned long data) early_exit: giveback(dws); - return; } static int dw_spi_transfer_one_message(struct spi_master *master, @@ -524,7 +519,7 @@ static int dw_spi_transfer_one_message(struct spi_master *master, struct dw_spi *dws = spi_master_get_devdata(master); dws->cur_msg = msg; - /* Initial message state*/ + /* Initial message state */ dws->cur_msg->state = START_STATE; dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, struct spi_transfer, @@ -595,6 +590,9 @@ static int dw_spi_setup(struct spi_device *spi) | (spi->mode << SPI_MODE_OFFSET) | (chip->tmode << SPI_TMOD_OFFSET); + if (spi->mode & SPI_LOOP) + chip->cr0 |= 1 << SPI_SRL_OFFSET; + if (gpio_is_valid(spi->cs_gpio)) { ret = gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); @@ -626,6 +624,7 @@ static void spi_hw_init(struct dw_spi *dws) */ if (!dws->fifo_len) { u32 fifo; + for (fifo = 2; fifo <= 257; fifo++) { dw_writew(dws, DW_SPI_TXFLTR, fifo); if (fifo != dw_readw(dws, DW_SPI_TXFLTR)) @@ -653,8 +652,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) dws->prev_chip = NULL; dws->dma_inited = 0; dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); - snprintf(dws->name, sizeof(dws->name), "dw_spi%d", - dws->bus_num); + snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num); ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, dws); @@ -663,7 +661,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) goto err_free_master; } - master->mode_bits = SPI_CPOL | SPI_CPHA; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); master->bus_num = dws->bus_num; master->num_chipselect = dws->num_cs; @@ -692,7 +690,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) goto err_dma_exit; } - mrst_spi_debugfs_init(dws); + dw_spi_debugfs_init(dws); return 0; err_dma_exit: @@ -709,7 +707,7 @@ void dw_spi_remove_host(struct dw_spi *dws) { if (!dws) return; - mrst_spi_debugfs_remove(dws); + dw_spi_debugfs_remove(dws); if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 6d2acad34f64..83a103a76481 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -74,6 +74,10 @@ #define SPI_INT_RXFI (1 << 4) #define SPI_INT_MSTI (1 << 5) +/* Bit fields in DMACR */ +#define SPI_DMA_RDMAE (1 << 0) +#define SPI_DMA_TDMAE (1 << 1) + /* TX RX interrupt level threshold, max can be 256 */ #define SPI_INT_THRESHOLD 32 @@ -140,7 +144,6 @@ struct dw_spi { dma_addr_t dma_addr; /* phy address of the Data register */ struct dw_spi_dma_ops *dma_ops; void *dma_priv; /* platform relate info */ - struct pci_dev *dmac; /* Bus interface info */ void *priv; @@ -217,11 +220,11 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) * Each SPI slave device to work with dw_api controller should * has such a structure claiming its working mode (PIO/DMA etc), * which can be save in the "controller_data" member of the - * struct spi_device + * struct spi_device. */ struct dw_spi_chip { - u8 poll_mode; /* 0 for contoller polling mode */ - u8 type; /* SPI/SSP/Micrwire */ + u8 poll_mode; /* 1 for controller polling mode */ + u8 type; /* SPI/SSP/MicroWire */ u8 enable_dma; void (*cs_control)(u32 command); }; diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 2f675d32df0e..bf9728773247 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -266,6 +266,7 @@ static int ep93xx_spi_setup(struct spi_device *spi) if (chip->ops && chip->ops->setup) { int ret = chip->ops->setup(spi); + if (ret) { kfree(chip); return ret; diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 54b06376f03c..c5dd20beee22 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -15,17 +15,17 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/fsl_devices.h> -#include <linux/dma-mapping.h> -#include <linux/of_address.h> #include <asm/cpm.h> #include <asm/qe.h> +#include <linux/dma-mapping.h> +#include <linux/fsl_devices.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/spi/spi.h> +#include <linux/types.h> -#include "spi-fsl-lib.h" #include "spi-fsl-cpm.h" +#include "spi-fsl-lib.h" #include "spi-fsl-spi.h" /* CPM1 and CPM2 are mutually exclusive. */ diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 5021ddf03f60..448216025ce8 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -13,22 +13,22 @@ * */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/errno.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/sched.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> -#include <linux/pm_runtime.h> -#include <linux/of.h> -#include <linux/of_device.h> #define DRIVER_NAME "fsl-dspi" @@ -493,9 +493,6 @@ static int dspi_probe(struct platform_device *pdev) } dspi_regmap_config.lock_arg = dspi; - dspi_regmap_config.val_format_endian = - of_property_read_bool(np, "big-endian") - ? REGMAP_ENDIAN_BIG : REGMAP_ENDIAN_DEFAULT; dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base, &dspi_regmap_config); if (IS_ERR(dspi->regmap)) { @@ -535,7 +532,6 @@ static int dspi_probe(struct platform_device *pdev) goto out_clk_put; } - pr_info(KERN_INFO "Freescale DSPI master initialized\n"); return ret; out_clk_put: diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 429e11190265..a7f94b6a9e70 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -8,19 +8,19 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include <linux/module.h> #include <linux/delay.h> -#include <linux/irq.h> -#include <linux/spi/spi.h> -#include <linux/platform_device.h> +#include <linux/err.h> #include <linux/fsl_devices.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> #include <linux/mm.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/interrupt.h> -#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> #include <sysdev/fsl_soc.h> #include "spi-fsl-lib.h" diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c index e0b773fc29cb..5ddb5b098e4e 100644 --- a/drivers/spi/spi-fsl-lib.c +++ b/drivers/spi/spi-fsl-lib.c @@ -16,10 +16,10 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/fsl_devices.h> #include <linux/dma-mapping.h> +#include <linux/fsl_devices.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> #include <linux/mm.h> #include <linux/of_platform.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 590f31bc0aba..ed792880c9d6 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -19,25 +19,25 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/irq.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> -#include <linux/platform_device.h> -#include <linux/fsl_devices.h> #include <linux/dma-mapping.h> +#include <linux/fsl_devices.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> #include <linux/mm.h> +#include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> -#include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/gpio.h> #include <linux/of_gpio.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> +#include <linux/types.h> #include "spi-fsl-lib.h" #include "spi-fsl-cpm.h" diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 5daff2054ae4..3637847b5370 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -21,6 +21,8 @@ #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/interrupt.h> @@ -37,6 +39,7 @@ #include <linux/of_device.h> #include <linux/of_gpio.h> +#include <linux/platform_data/dma-imx.h> #include <linux/platform_data/spi-imx.h> #define DRIVER_NAME "spi_imx" @@ -51,6 +54,9 @@ #define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */ #define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */ +/* The maximum bytes that a sdma BD can transfer.*/ +#define MAX_SDMA_BD_BYTES (1 << 15) +#define IMX_DMA_TIMEOUT (msecs_to_jiffies(3000)) struct spi_imx_config { unsigned int speed_hz; unsigned int bpw; @@ -95,6 +101,16 @@ struct spi_imx_data { const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ + /* DMA */ + unsigned int dma_is_inited; + unsigned int dma_finished; + bool usedma; + u32 rx_wml; + u32 tx_wml; + u32 rxt_wml; + struct completion dma_rx_completion; + struct completion dma_tx_completion; + const struct spi_imx_devtype_data *devtype_data; int chipselect[0]; }; @@ -181,9 +197,21 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, return 7; } +static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + + if (spi_imx->dma_is_inited && (transfer->len > spi_imx->rx_wml) + && (transfer->len > spi_imx->tx_wml)) + return true; + return false; +} + #define MX51_ECSPI_CTRL 0x08 #define MX51_ECSPI_CTRL_ENABLE (1 << 0) #define MX51_ECSPI_CTRL_XCH (1 << 2) +#define MX51_ECSPI_CTRL_SMC (1 << 3) #define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4) #define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8 #define MX51_ECSPI_CTRL_PREDIV_OFFSET 12 @@ -201,6 +229,18 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, #define MX51_ECSPI_INT_TEEN (1 << 0) #define MX51_ECSPI_INT_RREN (1 << 3) +#define MX51_ECSPI_DMA 0x14 +#define MX51_ECSPI_DMA_TX_WML_OFFSET 0 +#define MX51_ECSPI_DMA_TX_WML_MASK 0x3F +#define MX51_ECSPI_DMA_RX_WML_OFFSET 16 +#define MX51_ECSPI_DMA_RX_WML_MASK (0x3F << 16) +#define MX51_ECSPI_DMA_RXT_WML_OFFSET 24 +#define MX51_ECSPI_DMA_RXT_WML_MASK (0x3F << 24) + +#define MX51_ECSPI_DMA_TEDEN_OFFSET 7 +#define MX51_ECSPI_DMA_RXDEN_OFFSET 23 +#define MX51_ECSPI_DMA_RXTDEN_OFFSET 31 + #define MX51_ECSPI_STAT 0x18 #define MX51_ECSPI_STAT_RR (1 << 3) @@ -257,17 +297,22 @@ static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx) { - u32 reg; - - reg = readl(spi_imx->base + MX51_ECSPI_CTRL); - reg |= MX51_ECSPI_CTRL_XCH; + u32 reg = readl(spi_imx->base + MX51_ECSPI_CTRL); + + if (!spi_imx->usedma) + reg |= MX51_ECSPI_CTRL_XCH; + else if (!spi_imx->dma_finished) + reg |= MX51_ECSPI_CTRL_SMC; + else + reg &= ~MX51_ECSPI_CTRL_SMC; writel(reg, spi_imx->base + MX51_ECSPI_CTRL); } static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { - u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0; + u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0; + u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg; u32 clk = config->speed_hz, delay; /* @@ -319,6 +364,30 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, else /* SCLK is _very_ slow */ usleep_range(delay, delay + 10); + /* + * Configure the DMA register: setup the watermark + * and enable DMA request. + */ + if (spi_imx->dma_is_inited) { + dma = readl(spi_imx->base + MX51_ECSPI_DMA); + + spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2; + spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2; + spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2; + rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET; + tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET; + rxt_wml_cfg = spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET; + dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK + & ~MX51_ECSPI_DMA_RX_WML_MASK + & ~MX51_ECSPI_DMA_RXT_WML_MASK) + | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg + |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET) + |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET) + |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET); + + writel(dma, spi_imx->base + MX51_ECSPI_DMA); + } + return 0; } @@ -730,7 +799,186 @@ static int spi_imx_setupxfer(struct spi_device *spi, return 0; } -static int spi_imx_transfer(struct spi_device *spi, +static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx) +{ + struct spi_master *master = spi_imx->bitbang.master; + + if (master->dma_rx) { + dma_release_channel(master->dma_rx); + master->dma_rx = NULL; + } + + if (master->dma_tx) { + dma_release_channel(master->dma_tx); + master->dma_tx = NULL; + } + + spi_imx->dma_is_inited = 0; +} + +static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, + struct spi_master *master, + const struct resource *res) +{ + struct dma_slave_config slave_config = {}; + int ret; + + /* Prepare for TX DMA: */ + master->dma_tx = dma_request_slave_channel(dev, "tx"); + if (!master->dma_tx) { + dev_err(dev, "cannot get the TX DMA channel!\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_MEM_TO_DEV; + slave_config.dst_addr = res->start + MXC_CSPITXDATA; + slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + slave_config.dst_maxburst = spi_imx_get_fifosize(spi_imx) / 2; + ret = dmaengine_slave_config(master->dma_tx, &slave_config); + if (ret) { + dev_err(dev, "error in TX dma configuration.\n"); + goto err; + } + + /* Prepare for RX : */ + master->dma_rx = dma_request_slave_channel(dev, "rx"); + if (!master->dma_rx) { + dev_dbg(dev, "cannot get the DMA channel.\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_DEV_TO_MEM; + slave_config.src_addr = res->start + MXC_CSPIRXDATA; + slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + slave_config.src_maxburst = spi_imx_get_fifosize(spi_imx) / 2; + ret = dmaengine_slave_config(master->dma_rx, &slave_config); + if (ret) { + dev_err(dev, "error in RX dma configuration.\n"); + goto err; + } + + init_completion(&spi_imx->dma_rx_completion); + init_completion(&spi_imx->dma_tx_completion); + master->can_dma = spi_imx_can_dma; + master->max_dma_len = MAX_SDMA_BD_BYTES; + spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX | + SPI_MASTER_MUST_TX; + spi_imx->dma_is_inited = 1; + + return 0; +err: + spi_imx_sdma_exit(spi_imx); + return ret; +} + +static void spi_imx_dma_rx_callback(void *cookie) +{ + struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie; + + complete(&spi_imx->dma_rx_completion); +} + +static void spi_imx_dma_tx_callback(void *cookie) +{ + struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie; + + complete(&spi_imx->dma_tx_completion); +} + +static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, + struct spi_transfer *transfer) +{ + struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL; + int ret; + u32 dma; + int left; + struct spi_master *master = spi_imx->bitbang.master; + struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; + + if (tx) { + desc_tx = dmaengine_prep_slave_sg(master->dma_tx, + tx->sgl, tx->nents, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_tx) + goto no_dma; + + desc_tx->callback = spi_imx_dma_tx_callback; + desc_tx->callback_param = (void *)spi_imx; + dmaengine_submit(desc_tx); + } + + if (rx) { + desc_rx = dmaengine_prep_slave_sg(master->dma_rx, + rx->sgl, rx->nents, DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_rx) + goto no_dma; + + desc_rx->callback = spi_imx_dma_rx_callback; + desc_rx->callback_param = (void *)spi_imx; + dmaengine_submit(desc_rx); + } + + reinit_completion(&spi_imx->dma_rx_completion); + reinit_completion(&spi_imx->dma_tx_completion); + + /* Trigger the cspi module. */ + spi_imx->dma_finished = 0; + + dma = readl(spi_imx->base + MX51_ECSPI_DMA); + dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK); + /* Change RX_DMA_LENGTH trigger dma fetch tail data */ + left = transfer->len % spi_imx->rxt_wml; + if (left) + writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET), + spi_imx->base + MX51_ECSPI_DMA); + spi_imx->devtype_data->trigger(spi_imx); + + dma_async_issue_pending(master->dma_tx); + dma_async_issue_pending(master->dma_rx); + /* Wait SDMA to finish the data transfer.*/ + ret = wait_for_completion_timeout(&spi_imx->dma_tx_completion, + IMX_DMA_TIMEOUT); + if (!ret) { + pr_warn("%s %s: I/O Error in DMA TX\n", + dev_driver_string(&master->dev), + dev_name(&master->dev)); + dmaengine_terminate_all(master->dma_tx); + } else { + ret = wait_for_completion_timeout(&spi_imx->dma_rx_completion, + IMX_DMA_TIMEOUT); + if (!ret) { + pr_warn("%s %s: I/O Error in DMA RX\n", + dev_driver_string(&master->dev), + dev_name(&master->dev)); + spi_imx->devtype_data->reset(spi_imx); + dmaengine_terminate_all(master->dma_rx); + } + writel(dma | + spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET, + spi_imx->base + MX51_ECSPI_DMA); + } + + spi_imx->dma_finished = 1; + spi_imx->devtype_data->trigger(spi_imx); + + if (!ret) + ret = -ETIMEDOUT; + else if (ret > 0) + ret = transfer->len; + + return ret; + +no_dma: + pr_warn_once("%s %s: DMA not available, falling back to PIO\n", + dev_driver_string(&master->dev), + dev_name(&master->dev)); + return -EAGAIN; +} + +static int spi_imx_pio_transfer(struct spi_device *spi, struct spi_transfer *transfer) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); @@ -751,6 +999,24 @@ static int spi_imx_transfer(struct spi_device *spi, return transfer->len; } +static int spi_imx_transfer(struct spi_device *spi, + struct spi_transfer *transfer) +{ + int ret; + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + + if (spi_imx->bitbang.master->can_dma && + spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) { + spi_imx->usedma = true; + ret = spi_imx_dma_transfer(spi_imx, transfer); + if (ret != -EAGAIN) + return ret; + } + spi_imx->usedma = false; + + return spi_imx_pio_transfer(spi, transfer); +} + static int spi_imx_setup(struct spi_device *spi) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); @@ -911,6 +1177,13 @@ static int spi_imx_probe(struct platform_device *pdev) goto out_put_per; spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per); + /* + * Only validated on i.mx6 now, can remove the constrain if validated on + * other chips. + */ + if (spi_imx->devtype_data == &imx51_ecspi_devtype_data + && spi_imx_sdma_init(&pdev->dev, spi_imx, master, res)) + dev_err(&pdev->dev, "dma setup error,use pio instead\n"); spi_imx->devtype_data->reset(spi_imx); @@ -949,6 +1222,7 @@ static int spi_imx_remove(struct platform_device *pdev) writel(0, spi_imx->base + MXC_CSPICTRL); clk_unprepare(spi_imx->clk_ipg); clk_unprepare(spi_imx->clk_per); + spi_imx_sdma_exit(spi_imx); spi_master_put(master); return 0; diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 2884f0c2f5f0..51460878af04 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -85,7 +85,7 @@ static int mxs_spi_setup_transfer(struct spi_device *dev, mxs_ssp_set_clk_rate(ssp, hz); /* * Save requested rate, hz, rather than the actual rate, - * ssp->clk_rate. Otherwise we would set the rate every trasfer + * ssp->clk_rate. Otherwise we would set the rate every transfer * when the actual rate is not quite the same as requested rate. */ spi->sck = hz; @@ -154,12 +154,14 @@ static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set) static void mxs_ssp_dma_irq_callback(void *param) { struct mxs_spi *spi = param; + complete(&spi->c); } static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id) { struct mxs_ssp *ssp = dev_id; + dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n", __func__, __LINE__, readl(ssp->base + HW_SSP_CTRL1(ssp)), @@ -189,7 +191,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, if (!len) return -EINVAL; - dma_xfer = kzalloc(sizeof(*dma_xfer) * sgs, GFP_KERNEL); + dma_xfer = kcalloc(sgs, sizeof(*dma_xfer), GFP_KERNEL); if (!dma_xfer) return -ENOMEM; diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 5e91858f6f01..fb522765ce5a 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -70,10 +70,6 @@ #define SPI_STATUS_WE (1UL << 1) #define SPI_STATUS_RD (1UL << 0) -#define WRITE 0 -#define READ 1 - - /* use PIO for small transfers, avoiding DMA setup/teardown overhead and * cache operations; better heuristics consider wordsize and bitrate. */ diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index c4675fa8b645..835cdda6f4f5 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/pm_runtime.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/clk.h> #include <linux/sizes.h> #include <asm/unaligned.h> @@ -40,13 +41,27 @@ #define ORION_SPI_MODE_CPHA (1 << 12) #define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) #define ORION_SPI_CLK_PRESCALE_MASK 0x1F +#define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ ORION_SPI_MODE_CPHA) +enum orion_spi_type { + ORION_SPI, + ARMADA_SPI, +}; + +struct orion_spi_dev { + enum orion_spi_type typ; + unsigned int min_divisor; + unsigned int max_divisor; + u32 prescale_mask; +}; + struct orion_spi { struct spi_master *master; void __iomem *base; struct clk *clk; + const struct orion_spi_dev *devdata; }; static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) @@ -83,30 +98,66 @@ static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) u32 prescale; u32 reg; struct orion_spi *orion_spi; + const struct orion_spi_dev *devdata; orion_spi = spi_master_get_devdata(spi->master); + devdata = orion_spi->devdata; tclk_hz = clk_get_rate(orion_spi->clk); - /* - * the supported rates are: 4,6,8...30 - * round up as we look for equal or less speed - */ - rate = DIV_ROUND_UP(tclk_hz, speed); - rate = roundup(rate, 2); + if (devdata->typ == ARMADA_SPI) { + unsigned int clk, spr, sppr, sppr2, err; + unsigned int best_spr, best_sppr, best_err; - /* check if requested speed is too small */ - if (rate > 30) - return -EINVAL; + best_err = speed; + best_spr = 0; + best_sppr = 0; - if (rate < 4) - rate = 4; + /* Iterate over the valid range looking for best fit */ + for (sppr = 0; sppr < 8; sppr++) { + sppr2 = 0x1 << sppr; + + spr = tclk_hz / sppr2; + spr = DIV_ROUND_UP(spr, speed); + if ((spr == 0) || (spr > 15)) + continue; + + clk = tclk_hz / (spr * sppr2); + err = speed - clk; + + if (err < best_err) { + best_spr = spr; + best_sppr = sppr; + best_err = err; + } + } - /* Convert the rate to SPI clock divisor value. */ - prescale = 0x10 + rate/2; + if ((best_sppr == 0) && (best_spr == 0)) + return -EINVAL; + + prescale = ((best_sppr & 0x6) << 5) | + ((best_sppr & 0x1) << 4) | best_spr; + } else { + /* + * the supported rates are: 4,6,8...30 + * round up as we look for equal or less speed + */ + rate = DIV_ROUND_UP(tclk_hz, speed); + rate = roundup(rate, 2); + + /* check if requested speed is too small */ + if (rate > 30) + return -EINVAL; + + if (rate < 4) + rate = 4; + + /* Convert the rate to SPI clock divisor value. */ + prescale = 0x10 + rate/2; + } reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); - reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale); + reg = ((reg & ~devdata->prescale_mask) | prescale); writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); return 0; @@ -179,8 +230,8 @@ static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) return 1; - else - udelay(1); + + udelay(1); } return -1; @@ -342,8 +393,31 @@ static int orion_spi_reset(struct orion_spi *orion_spi) return 0; } +static const struct orion_spi_dev orion_spi_dev_data = { + .typ = ORION_SPI, + .min_divisor = 4, + .max_divisor = 30, + .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK, +}; + +static const struct orion_spi_dev armada_spi_dev_data = { + .typ = ARMADA_SPI, + .min_divisor = 1, + .max_divisor = 1920, + .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, +}; + +static const struct of_device_id orion_spi_of_match_table[] = { + { .compatible = "marvell,orion-spi", .data = &orion_spi_dev_data, }, + { .compatible = "marvell,armada-370-spi", .data = &armada_spi_dev_data, }, + {} +}; +MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); + static int orion_spi_probe(struct platform_device *pdev) { + const struct of_device_id *of_id; + const struct orion_spi_dev *devdata; struct spi_master *master; struct orion_spi *spi; struct resource *r; @@ -360,6 +434,7 @@ static int orion_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; if (pdev->dev.of_node) { u32 cell_index; + if (!of_property_read_u32(pdev->dev.of_node, "cell-index", &cell_index)) master->bus_num = cell_index; @@ -378,6 +453,10 @@ static int orion_spi_probe(struct platform_device *pdev) spi = spi_master_get_devdata(master); spi->master = master; + of_id = of_match_device(orion_spi_of_match_table, &pdev->dev); + devdata = of_id->data; + spi->devdata = devdata; + spi->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(spi->clk)) { status = PTR_ERR(spi->clk); @@ -389,8 +468,8 @@ static int orion_spi_probe(struct platform_device *pdev) goto out; tclk_hz = clk_get_rate(spi->clk); - master->max_speed_hz = DIV_ROUND_UP(tclk_hz, 4); - master->min_speed_hz = DIV_ROUND_UP(tclk_hz, 30); + master->max_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->min_divisor); + master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); spi->base = devm_ioremap_resource(&pdev->dev, r); @@ -469,12 +548,6 @@ static const struct dev_pm_ops orion_spi_pm_ops = { NULL) }; -static const struct of_device_id orion_spi_of_match_table[] = { - { .compatible = "marvell,orion-spi", }, - {} -}; -MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); - static struct platform_driver orion_spi_driver = { .driver = { .name = DRIVER_NAME, diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index f1f0a587e4fc..f35f723816ea 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -82,6 +82,7 @@ #define SSP_MIS(r) (r + 0x01C) #define SSP_ICR(r) (r + 0x020) #define SSP_DMACR(r) (r + 0x024) +#define SSP_CSR(r) (r + 0x030) /* vendor extension */ #define SSP_ITCR(r) (r + 0x080) #define SSP_ITIP(r) (r + 0x084) #define SSP_ITOP(r) (r + 0x088) @@ -198,6 +199,12 @@ #define SSP_DMACR_MASK_TXDMAE (0x1UL << 1) /* + * SSP Chip Select Control Register - SSP_CSR + * (vendor extension) + */ +#define SSP_CSR_CSVALUE_MASK (0x1FUL << 0) + +/* * SSP Integration Test control Register - SSP_ITCR */ #define SSP_ITCR_MASK_ITEN (0x1UL << 0) @@ -313,6 +320,7 @@ enum ssp_writing { * @extended_cr: 32 bit wide control register 0 with extra * features and extra features in CR1 as found in the ST variants * @pl023: supports a subset of the ST extensions called "PL023" + * @internal_cs_ctrl: supports chip select control register */ struct vendor_data { int fifodepth; @@ -321,6 +329,7 @@ struct vendor_data { bool extended_cr; bool pl023; bool loopback; + bool internal_cs_ctrl; }; /** @@ -440,9 +449,32 @@ static void null_cs_control(u32 command) pr_debug("pl022: dummy chip select control, CS=0x%x\n", command); } +/** + * internal_cs_control - Control chip select signals via SSP_CSR. + * @pl022: SSP driver private data structure + * @command: select/delect the chip + * + * Used on controller with internal chip select control via SSP_CSR register + * (vendor extension). Each of the 5 LSB in the register controls one chip + * select signal. + */ +static void internal_cs_control(struct pl022 *pl022, u32 command) +{ + u32 tmp; + + tmp = readw(SSP_CSR(pl022->virtbase)); + if (command == SSP_CHIP_SELECT) + tmp &= ~BIT(pl022->cur_cs); + else + tmp |= BIT(pl022->cur_cs); + writew(tmp, SSP_CSR(pl022->virtbase)); +} + static void pl022_cs_control(struct pl022 *pl022, u32 command) { - if (gpio_is_valid(pl022->cur_cs)) + if (pl022->vendor->internal_cs_ctrl) + internal_cs_control(pl022, command); + else if (gpio_is_valid(pl022->cur_cs)) gpio_set_value(pl022->cur_cs, command); else pl022->cur_chip->cs_control(command); @@ -2100,6 +2132,10 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) pl022->vendor = id->data; pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int), GFP_KERNEL); + if (!pl022->chipselects) { + status = -ENOMEM; + goto err_no_mem; + } /* * Bus Number Which has been Assigned to this SSP controller @@ -2118,6 +2154,9 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) if (platform_info->num_chipselect && platform_info->chipselects) { for (i = 0; i < num_cs; i++) pl022->chipselects[i] = platform_info->chipselects[i]; + } else if (pl022->vendor->internal_cs_ctrl) { + for (i = 0; i < num_cs; i++) + pl022->chipselects[i] = i; } else if (IS_ENABLED(CONFIG_OF)) { for (i = 0; i < num_cs; i++) { int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); @@ -2241,6 +2280,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) amba_release_regions(adev); err_no_ioregion: err_no_gpio: + err_no_mem: spi_master_put(master); return status; } @@ -2347,6 +2387,7 @@ static struct vendor_data vendor_arm = { .extended_cr = false, .pl023 = false, .loopback = true, + .internal_cs_ctrl = false, }; static struct vendor_data vendor_st = { @@ -2356,6 +2397,7 @@ static struct vendor_data vendor_st = { .extended_cr = true, .pl023 = false, .loopback = true, + .internal_cs_ctrl = false, }; static struct vendor_data vendor_st_pl023 = { @@ -2365,6 +2407,17 @@ static struct vendor_data vendor_st_pl023 = { .extended_cr = true, .pl023 = true, .loopback = false, + .internal_cs_ctrl = false, +}; + +static struct vendor_data vendor_lsi = { + .fifodepth = 8, + .max_bpw = 16, + .unidir = false, + .extended_cr = false, + .pl023 = false, + .loopback = true, + .internal_cs_ctrl = true, }; static struct amba_id pl022_ids[] = { @@ -2398,6 +2451,15 @@ static struct amba_id pl022_ids[] = { .mask = 0xffffffff, .data = &vendor_st_pl023, }, + { + /* + * PL022 variant that has a chip select control register whih + * allows control of 5 output signals nCS[0:4]. + */ + .id = 0x000b6022, + .mask = 0x000fffff, + .data = &vendor_lsi, + }, { 0, 0 }, }; diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index c1865c92ccb9..536c863bebf1 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -7,6 +7,8 @@ #include <linux/of_device.h> #include <linux/module.h> #include <linux/spi/pxa2xx_spi.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> enum { PORT_CE4100, @@ -21,6 +23,7 @@ struct pxa_spi_info { int tx_chan_id; int rx_slave_id; int rx_chan_id; + unsigned long max_clk_rate; }; static struct pxa_spi_info spi_info_configs[] = { @@ -32,6 +35,7 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_chan_id = -1, .rx_slave_id = -1, .rx_chan_id = -1, + .max_clk_rate = 3686400, }, [PORT_BYT] = { .type = LPSS_SSP, @@ -41,6 +45,7 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_chan_id = 0, .rx_slave_id = 1, .rx_chan_id = 1, + .max_clk_rate = 50000000, }, }; @@ -53,6 +58,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, struct pxa2xx_spi_master spi_pdata; struct ssp_device *ssp; struct pxa_spi_info *c; + char buf[40]; ret = pcim_enable_device(dev); if (ret) @@ -84,6 +90,12 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn; ssp->type = c->type; + snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id); + ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, + CLK_IS_ROOT, c->max_clk_rate); + if (IS_ERR(ssp->clk)) + return PTR_ERR(ssp->clk); + memset(&pi, 0, sizeof(pi)); pi.parent = &dev->dev; pi.name = "pxa2xx-spi"; @@ -92,8 +104,10 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, pi.size_data = sizeof(spi_pdata); pdev = platform_device_register_full(&pi); - if (IS_ERR(pdev)) + if (IS_ERR(pdev)) { + clk_unregister(ssp->clk); return PTR_ERR(pdev); + } pci_set_drvdata(dev, pdev); @@ -103,8 +117,12 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, static void pxa2xx_spi_pci_remove(struct pci_dev *dev) { struct platform_device *pdev = pci_get_drvdata(dev); + struct pxa2xx_spi_master *spi_pdata; + + spi_pdata = dev_get_platdata(&pdev->dev); platform_device_unregister(pdev); + clk_unregister(spi_pdata->ssp.clk); } static const struct pci_device_id pxa2xx_spi_pci_devices[] = { diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 3afc266b666d..f96ea8a38d64 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -415,7 +415,7 @@ static void rockchip_spi_dma_txcb(void *data) spin_unlock_irqrestore(&rs->lock, flags); } -static int rockchip_spi_dma_transfer(struct rockchip_spi *rs) +static void rockchip_spi_prepare_dma(struct rockchip_spi *rs) { unsigned long flags; struct dma_slave_config rxconf, txconf; @@ -474,8 +474,6 @@ static int rockchip_spi_dma_transfer(struct rockchip_spi *rs) dmaengine_submit(txdesc); dma_async_issue_pending(rs->dma_tx.ch); } - - return 1; } static void rockchip_spi_config(struct rockchip_spi *rs) @@ -557,16 +555,17 @@ static int rockchip_spi_transfer_one( else if (rs->rx) rs->tmode = CR0_XFM_RO; - if (master->can_dma && master->can_dma(master, spi, xfer)) + /* we need prepare dma before spi was enabled */ + if (master->can_dma && master->can_dma(master, spi, xfer)) { rs->use_dma = 1; - else + rockchip_spi_prepare_dma(rs); + } else { rs->use_dma = 0; + } rockchip_spi_config(rs); - if (rs->use_dma) - ret = rockchip_spi_dma_transfer(rs); - else + if (!rs->use_dma) ret = rockchip_spi_pio_transfer(rs); return ret; diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index ad87a98f8f68..54bb0faec155 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -87,7 +87,7 @@ /* RSPI on SH only */ #define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */ #define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */ -/* QSPI on R-Car M2 only */ +/* QSPI on R-Car Gen2 only */ #define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */ #define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */ @@ -909,20 +909,24 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev, dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - chan = dma_request_channel(mask, shdma_chan_filter, - (void *)(unsigned long)id); + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)id, dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(dev, "dma_request_channel failed\n"); + dev_warn(dev, "dma_request_slave_channel_compat failed\n"); return NULL; } memset(&cfg, 0, sizeof(cfg)); cfg.slave_id = id; cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) + if (dir == DMA_MEM_TO_DEV) { cfg.dst_addr = port_addr; - else + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } else { cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } ret = dmaengine_slave_config(chan, &cfg); if (ret) { @@ -938,22 +942,30 @@ static int rspi_request_dma(struct device *dev, struct spi_master *master, const struct resource *res) { const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev); + unsigned int dma_tx_id, dma_rx_id; + + if (dev->of_node) { + /* In the OF case we will get the slave IDs from the DT */ + dma_tx_id = 0; + dma_rx_id = 0; + } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) { + dma_tx_id = rspi_pd->dma_tx_id; + dma_rx_id = rspi_pd->dma_rx_id; + } else { + /* The driver assumes no error. */ + return 0; + } - if (!rspi_pd || !rspi_pd->dma_rx_id || !rspi_pd->dma_tx_id) - return 0; /* The driver assumes no error. */ - - master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, - rspi_pd->dma_rx_id, + master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id, res->start + RSPI_SPDR); - if (!master->dma_rx) + if (!master->dma_tx) return -ENODEV; - master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, - rspi_pd->dma_tx_id, + master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id, res->start + RSPI_SPDR); - if (!master->dma_tx) { - dma_release_channel(master->dma_rx); - master->dma_rx = NULL; + if (!master->dma_rx) { + dma_release_channel(master->dma_tx); + master->dma_tx = NULL; return -ENODEV; } @@ -1046,12 +1058,11 @@ static int rspi_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, const char *suffix, void *dev_id) { - const char *base = dev_name(dev); - size_t len = strlen(base) + strlen(suffix) + 2; - char *name = devm_kzalloc(dev, len, GFP_KERNEL); + const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", + dev_name(dev), suffix); if (!name) return -ENOMEM; - snprintf(name, len, "%s:%s", base, suffix); + return devm_request_irq(dev, irq, handler, 0, name, dev_id); } @@ -1084,7 +1095,7 @@ static int rspi_probe(struct platform_device *pdev) master->num_chipselect = rspi_pd->num_chipselect; else master->num_chipselect = 2; /* default */ - }; + } /* ops parameter check */ if (!ops->set_config_register) { diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 543075b80f16..3f365402fcc0 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -642,18 +642,14 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, desc_rx = dmaengine_prep_slave_single(p->master->dma_rx, p->rx_dma_addr, len, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_rx) { - ret = -EAGAIN; - goto no_dma_rx; - } + if (!desc_rx) + return -EAGAIN; desc_rx->callback = sh_msiof_dma_complete; desc_rx->callback_param = p; cookie = dmaengine_submit(desc_rx); - if (dma_submit_error(cookie)) { - ret = cookie; - goto no_dma_rx; - } + if (dma_submit_error(cookie)) + return cookie; } if (tx) { @@ -738,7 +734,6 @@ no_dma_tx: if (rx) dmaengine_terminate_all(p->master->dma_rx); sh_msiof_write(p, IER, 0); -no_dma_rx: return ret; } @@ -933,6 +928,9 @@ static const struct of_device_id sh_msiof_match[] = { { .compatible = "renesas,sh-mobile-msiof", .data = &sh_data }, { .compatible = "renesas,msiof-r8a7790", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7791", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7792", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7793", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7794", .data = &r8a779x_data }, {}, }; MODULE_DEVICE_TABLE(of, sh_msiof_match); @@ -977,20 +975,24 @@ static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev, dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - chan = dma_request_channel(mask, shdma_chan_filter, - (void *)(unsigned long)id); + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)id, dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(dev, "dma_request_channel failed\n"); + dev_warn(dev, "dma_request_slave_channel_compat failed\n"); return NULL; } memset(&cfg, 0, sizeof(cfg)); cfg.slave_id = id; cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) + if (dir == DMA_MEM_TO_DEV) { cfg.dst_addr = port_addr; - else + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } else { cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } ret = dmaengine_slave_config(chan, &cfg); if (ret) { @@ -1007,12 +1009,22 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p) struct platform_device *pdev = p->pdev; struct device *dev = &pdev->dev; const struct sh_msiof_spi_info *info = dev_get_platdata(dev); + unsigned int dma_tx_id, dma_rx_id; const struct resource *res; struct spi_master *master; struct device *tx_dev, *rx_dev; - if (!info || !info->dma_tx_id || !info->dma_rx_id) - return 0; /* The driver assumes no error */ + if (dev->of_node) { + /* In the OF case we will get the slave IDs from the DT */ + dma_tx_id = 0; + dma_rx_id = 0; + } else if (info && info->dma_tx_id && info->dma_rx_id) { + dma_tx_id = info->dma_tx_id; + dma_rx_id = info->dma_rx_id; + } else { + /* The driver assumes no error */ + return 0; + } /* The DMA engine uses the second register set, if present */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); @@ -1021,13 +1033,13 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p) master = p->master; master->dma_tx = sh_msiof_request_dma_chan(dev, DMA_MEM_TO_DEV, - info->dma_tx_id, + dma_tx_id, res->start + TFDR); if (!master->dma_tx) return -ENODEV; master->dma_rx = sh_msiof_request_dma_chan(dev, DMA_DEV_TO_MEM, - info->dma_rx_id, + dma_rx_id, res->start + RFDR); if (!master->dma_rx) goto free_tx_chan; @@ -1210,6 +1222,9 @@ static struct platform_device_id spi_driver_ids[] = { { "spi_sh_msiof", (kernel_ulong_t)&sh_data }, { "spi_r8a7790_msiof", (kernel_ulong_t)&r8a779x_data }, { "spi_r8a7791_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7792_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7793_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7794_msiof", (kernel_ulong_t)&r8a779x_data }, {}, }; MODULE_DEVICE_TABLE(platform, spi_driver_ids); diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 6f0602fd7401..39e2c0a55a28 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -62,15 +62,15 @@ #define SIRFSOC_SPI_TRAN_DAT_FORMAT_12 (1 << 26) #define SIRFSOC_SPI_TRAN_DAT_FORMAT_16 (2 << 26) #define SIRFSOC_SPI_TRAN_DAT_FORMAT_32 (3 << 26) -#define SIRFSOC_SPI_CMD_BYTE_NUM(x) ((x & 3) << 28) -#define SIRFSOC_SPI_ENA_AUTO_CLR BIT(30) -#define SIRFSOC_SPI_MUL_DAT_MODE BIT(31) +#define SIRFSOC_SPI_CMD_BYTE_NUM(x) ((x & 3) << 28) +#define SIRFSOC_SPI_ENA_AUTO_CLR BIT(30) +#define SIRFSOC_SPI_MUL_DAT_MODE BIT(31) /* Interrupt Enable */ -#define SIRFSOC_SPI_RX_DONE_INT_EN BIT(0) -#define SIRFSOC_SPI_TX_DONE_INT_EN BIT(1) -#define SIRFSOC_SPI_RX_OFLOW_INT_EN BIT(2) -#define SIRFSOC_SPI_TX_UFLOW_INT_EN BIT(3) +#define SIRFSOC_SPI_RX_DONE_INT_EN BIT(0) +#define SIRFSOC_SPI_TX_DONE_INT_EN BIT(1) +#define SIRFSOC_SPI_RX_OFLOW_INT_EN BIT(2) +#define SIRFSOC_SPI_TX_UFLOW_INT_EN BIT(3) #define SIRFSOC_SPI_RX_IO_DMA_INT_EN BIT(4) #define SIRFSOC_SPI_TX_IO_DMA_INT_EN BIT(5) #define SIRFSOC_SPI_RXFIFO_FULL_INT_EN BIT(6) @@ -79,7 +79,7 @@ #define SIRFSOC_SPI_TXFIFO_THD_INT_EN BIT(9) #define SIRFSOC_SPI_FRM_END_INT_EN BIT(10) -#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF +#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF /* Interrupt status */ #define SIRFSOC_SPI_RX_DONE BIT(0) @@ -170,8 +170,7 @@ struct sirfsoc_spi { * command model */ bool tx_by_cmd; - - int chipselect[0]; + bool hw_cs; }; static void spi_sirfsoc_rx_word_u8(struct sirfsoc_spi *sspi) @@ -304,7 +303,7 @@ static void spi_sirfsoc_dma_fini_callback(void *data) complete(dma_complete); } -static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, +static void spi_sirfsoc_cmd_transfer(struct spi_device *spi, struct spi_transfer *t) { struct sirfsoc_spi *sspi; @@ -328,10 +327,9 @@ static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, sspi->base + SIRFSOC_SPI_TX_RX_EN); if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { dev_err(&spi->dev, "cmd transfer timeout\n"); - return 0; + return; } - - return t->len; + sspi->left_rx_word -= t->len; } static void spi_sirfsoc_dma_transfer(struct spi_device *spi, @@ -487,7 +485,7 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) { struct sirfsoc_spi *sspi = spi_master_get_devdata(spi->master); - if (sspi->chipselect[spi->chip_select] == 0) { + if (sspi->hw_cs) { u32 regval = readl(sspi->base + SIRFSOC_SPI_CTRL); switch (value) { case BITBANG_CS_ACTIVE: @@ -505,14 +503,13 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) } writel(regval, sspi->base + SIRFSOC_SPI_CTRL); } else { - int gpio = sspi->chipselect[spi->chip_select]; switch (value) { case BITBANG_CS_ACTIVE: - gpio_direction_output(gpio, + gpio_direction_output(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 1 : 0); break; case BITBANG_CS_INACTIVE: - gpio_direction_output(gpio, + gpio_direction_output(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); break; } @@ -606,8 +603,8 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) sspi->tx_by_cmd = false; } /* - * set spi controller in RISC chipselect mode, we are controlling CS by - * software BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. + * it should never set to hardware cs mode because in hardware cs mode, + * cs signal can't controlled by driver. */ regval |= SIRFSOC_SPI_CS_IO_MODE; writel(regval, sspi->base + SIRFSOC_SPI_CTRL); @@ -630,9 +627,17 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) static int spi_sirfsoc_setup(struct spi_device *spi) { + struct sirfsoc_spi *sspi; + if (!spi->max_speed_hz) return -EINVAL; + sspi = spi_master_get_devdata(spi->master); + + if (spi->cs_gpio == -ENOENT) + sspi->hw_cs = true; + else + sspi->hw_cs = false; return spi_sirfsoc_setup_transfer(spi, NULL); } @@ -641,19 +646,10 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) struct sirfsoc_spi *sspi; struct spi_master *master; struct resource *mem_res; - int num_cs, cs_gpio, irq; - int i; - int ret; - - ret = of_property_read_u32(pdev->dev.of_node, - "sirf,spi-num-chipselects", &num_cs); - if (ret < 0) { - dev_err(&pdev->dev, "Unable to get chip select number\n"); - goto err_cs; - } + int irq; + int i, ret; - master = spi_alloc_master(&pdev->dev, - sizeof(*sspi) + sizeof(int) * num_cs); + master = spi_alloc_master(&pdev->dev, sizeof(*sspi)); if (!master) { dev_err(&pdev->dev, "Unable to allocate SPI master\n"); return -ENOMEM; @@ -661,32 +657,6 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, master); sspi = spi_master_get_devdata(master); - master->num_chipselect = num_cs; - - for (i = 0; i < master->num_chipselect; i++) { - cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", i); - if (cs_gpio < 0) { - dev_err(&pdev->dev, "can't get cs gpio from DT\n"); - ret = -ENODEV; - goto free_master; - } - - sspi->chipselect[i] = cs_gpio; - if (cs_gpio == 0) - continue; /* use cs from spi controller */ - - ret = gpio_request(cs_gpio, DRIVER_NAME); - if (ret) { - while (i > 0) { - i--; - if (sspi->chipselect[i] > 0) - gpio_free(sspi->chipselect[i]); - } - dev_err(&pdev->dev, "fail to request cs gpios\n"); - goto free_master; - } - } - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sspi->base = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(sspi->base)) { @@ -756,7 +726,21 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) ret = spi_bitbang_start(&sspi->bitbang); if (ret) goto free_dummypage; - + for (i = 0; master->cs_gpios && i < master->num_chipselect; i++) { + if (master->cs_gpios[i] == -ENOENT) + continue; + if (!gpio_is_valid(master->cs_gpios[i])) { + dev_err(&pdev->dev, "no valid gpio\n"); + ret = -EINVAL; + goto free_dummypage; + } + ret = devm_gpio_request(&pdev->dev, + master->cs_gpios[i], DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, "failed to request gpio\n"); + goto free_dummypage; + } + } dev_info(&pdev->dev, "registerred, bus number = %d\n", master->bus_num); return 0; @@ -771,7 +755,7 @@ free_rx_dma: dma_release_channel(sspi->rx_chan); free_master: spi_master_put(master); -err_cs: + return ret; } @@ -779,16 +763,11 @@ static int spi_sirfsoc_remove(struct platform_device *pdev) { struct spi_master *master; struct sirfsoc_spi *sspi; - int i; master = platform_get_drvdata(pdev); sspi = spi_master_get_devdata(master); spi_bitbang_stop(&sspi->bitbang); - for (i = 0; i < master->num_chipselect; i++) { - if (sspi->chipselect[i] > 0) - gpio_free(sspi->chipselect[i]); - } kfree(sspi->dummypage); clk_disable_unprepare(sspi->clk); clk_put(sspi->clk); diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index e4a85ada861d..795bcbc0131b 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -302,6 +302,7 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf( max_n_32bit = DIV_ROUND_UP(nbytes, 4); for (count = 0; count < max_n_32bit; count++) { u32 x = 0; + for (i = 0; (i < 4) && nbytes; i++, nbytes--) x |= (u32)(*tx_buf++) << (i * 8); tegra_spi_writel(tspi, x, SPI_TX_FIFO); @@ -312,6 +313,7 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf( nbytes = written_words * tspi->bytes_per_word; for (count = 0; count < max_n_32bit; count++) { u32 x = 0; + for (i = 0; nbytes && (i < tspi->bytes_per_word); i++, nbytes--) x |= (u32)(*tx_buf++) << (i * 8); @@ -338,6 +340,7 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf( len = tspi->curr_dma_words * tspi->bytes_per_word; for (count = 0; count < rx_full_count; count++) { u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO); + for (i = 0; len && (i < 4); i++, len--) *rx_buf++ = (x >> i*8) & 0xFF; } @@ -345,8 +348,10 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf( read_words += tspi->curr_dma_words; } else { u32 rx_mask = ((u32)1 << t->bits_per_word) - 1; + for (count = 0; count < rx_full_count; count++) { u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO) & rx_mask; + for (i = 0; (i < tspi->bytes_per_word); i++) *rx_buf++ = (x >> (i*8)) & 0xFF; } @@ -365,6 +370,7 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf( if (tspi->is_packed) { unsigned len = tspi->curr_dma_words * tspi->bytes_per_word; + memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len); } else { unsigned int i; @@ -374,6 +380,7 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf( for (count = 0; count < tspi->curr_dma_words; count++) { u32 x = 0; + for (i = 0; consume && (i < tspi->bytes_per_word); i++, consume--) x |= (u32)(*tx_buf++) << (i * 8); @@ -396,6 +403,7 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf( if (tspi->is_packed) { unsigned len = tspi->curr_dma_words * tspi->bytes_per_word; + memcpy(t->rx_buf + tspi->cur_rx_pos, tspi->rx_dma_buf, len); } else { unsigned int i; @@ -405,6 +413,7 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf( for (count = 0; count < tspi->curr_dma_words; count++) { u32 x = tspi->rx_dma_buf[count] & rx_mask; + for (i = 0; (i < tspi->bytes_per_word); i++) *rx_buf++ = (x >> (i*8)) & 0xFF; } diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index 3548ce25c08f..cd66fe7b78a9 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -99,7 +99,7 @@ #define SPI_TX_TRIG_MASK (0x3 << 16) #define SPI_TX_TRIG_1W (0x0 << 16) #define SPI_TX_TRIG_4W (0x1 << 16) -#define SPI_DMA_BLK_COUNT(count) (((count) - 1) & 0xFFFF); +#define SPI_DMA_BLK_COUNT(count) (((count) - 1) & 0xFFFF) #define SPI_TX_FIFO 0x10 #define SPI_RX_FIFO 0x20 @@ -221,6 +221,7 @@ static int tegra_sflash_read_rx_fifo_to_client_rxbuf( while (!(status & SPI_RXF_EMPTY)) { int i; u32 x = tegra_sflash_readl(tsd, SPI_RX_FIFO); + for (i = 0; (i < tsd->bytes_per_word); i++) *rx_buf++ = (x >> (i*8)) & 0xFF; read_words++; diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index 5f183baa91a9..2501a8373e89 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -97,6 +97,7 @@ static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c, int on, unsigned int cs_delay) { int val = (spi->mode & SPI_CS_HIGH) ? on : !on; + if (on) { /* deselect the chip with cs_change hint in last transfer */ if (c->last_chipselect >= 0) @@ -188,6 +189,7 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) if (prev_speed_hz != speed_hz || prev_bits_per_word != bits_per_word) { int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1; + n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER); /* enter config mode */ txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index 4d8efb16573d..79bd84f43430 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -471,7 +471,6 @@ static struct platform_driver xilinx_spi_driver = { .remove = xilinx_spi_remove, .driver = { .name = XILINX_SPI_NAME, - .owner = THIS_MODULE, .of_match_table = xilinx_spi_of_match, }, }; diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c index 41e158187f9d..0dc5df5233a9 100644 --- a/drivers/spi/spi-xtensa-xtfpga.c +++ b/drivers/spi/spi-xtensa-xtfpga.c @@ -46,6 +46,7 @@ static inline unsigned int xtfpga_spi_read32(const struct xtfpga_spi *spi, static inline void xtfpga_spi_wait_busy(struct xtfpga_spi *xspi) { unsigned i; + for (i = 0; xtfpga_spi_read32(xspi, XTFPGA_SPI_BUSY) && i < BUSY_WAIT_US; ++i) udelay(1); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ca935df80c88..e19512ffc40e 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -552,6 +552,9 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n) struct boardinfo *bi; int i; + if (!n) + return -EINVAL; + bi = kzalloc(n * sizeof(*bi), GFP_KERNEL); if (!bi) return -ENOMEM; @@ -789,27 +792,35 @@ static int spi_transfer_one_message(struct spi_master *master, list_for_each_entry(xfer, &msg->transfers, transfer_list) { trace_spi_transfer_start(msg, xfer); - reinit_completion(&master->xfer_completion); + if (xfer->tx_buf || xfer->rx_buf) { + reinit_completion(&master->xfer_completion); - ret = master->transfer_one(master, msg->spi, xfer); - if (ret < 0) { - dev_err(&msg->spi->dev, - "SPI transfer failed: %d\n", ret); - goto out; - } + ret = master->transfer_one(master, msg->spi, xfer); + if (ret < 0) { + dev_err(&msg->spi->dev, + "SPI transfer failed: %d\n", ret); + goto out; + } - if (ret > 0) { - ret = 0; - ms = xfer->len * 8 * 1000 / xfer->speed_hz; - ms += ms + 100; /* some tolerance */ + if (ret > 0) { + ret = 0; + ms = xfer->len * 8 * 1000 / xfer->speed_hz; + ms += ms + 100; /* some tolerance */ - ms = wait_for_completion_timeout(&master->xfer_completion, - msecs_to_jiffies(ms)); - } + ms = wait_for_completion_timeout(&master->xfer_completion, + msecs_to_jiffies(ms)); + } - if (ms == 0) { - dev_err(&msg->spi->dev, "SPI transfer timed out\n"); - msg->status = -ETIMEDOUT; + if (ms == 0) { + dev_err(&msg->spi->dev, + "SPI transfer timed out\n"); + msg->status = -ETIMEDOUT; + } + } else { + if (xfer->len) + dev_err(&msg->spi->dev, + "Bufferless transfer has length %u\n", + xfer->len); } trace_spi_transfer_stop(msg, xfer); diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index fdd7e1b61f60..c324f5700d1a 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -44,10 +44,15 @@ struct amba_driver { const struct amba_id *id_table; }; +/* + * Constants for the designer field of the Peripheral ID register. When bit 7 + * is set to '1', bits [6:0] should be the JEP106 manufacturer identity code. + */ enum amba_vendor { AMBA_VENDOR_ARM = 0x41, AMBA_VENDOR_ST = 0x80, AMBA_VENDOR_QCOM = 0x51, + AMBA_VENDOR_LSI = 0xb6, }; extern struct bus_type amba_bustype; |