summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/clock/sun8i-de2.txt5
-rw-r--r--drivers/clk/Kconfig12
-rw-r--r--drivers/clk/Makefile3
-rw-r--r--drivers/clk/clk-aspeed.c667
-rw-r--r--drivers/clk/clk.c10
-rw-r--r--drivers/clk/mediatek/Kconfig97
-rw-r--r--drivers/clk/mediatek/Makefile3
-rw-r--r--drivers/clk/mediatek/clk-mtk.h8
-rw-r--r--drivers/clk/sunxi-ng/ccu-sun50i-a64.c57
-rw-r--r--drivers/clk/sunxi-ng/ccu-sun8i-a83t.c22
-rw-r--r--drivers/clk/sunxi-ng/ccu-sun8i-de2.c53
-rw-r--r--drivers/clk/sunxi-ng/ccu_mp.c20
-rw-r--r--drivers/clk/sunxi-ng/ccu_mp.h24
-rw-r--r--drivers/clk/sunxi-ng/ccu_nm.c50
-rw-r--r--drivers/clk/sunxi-ng/ccu_nm.h2
-rw-r--r--drivers/clk/sunxi/clk-sun8i-apb0.c5
-rw-r--r--include/dt-bindings/clock/aspeed-clock.h52
17 files changed, 984 insertions, 106 deletions
diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
index 631d27cd89d6..f2fa87c4765c 100644
--- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt
+++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
@@ -4,13 +4,14 @@ Allwinner Display Engine 2.0 Clock Control Binding
Required properties :
- compatible: must contain one of the following compatibles:
- "allwinner,sun8i-a83t-de2-clk"
+ - "allwinner,sun8i-h3-de2-clk"
- "allwinner,sun8i-v3s-de2-clk"
- "allwinner,sun50i-h5-de2-clk"
- reg: Must contain the registers base address and length
- clocks: phandle to the clocks feeding the display engine subsystem.
Three are needed:
- - "mod": the display engine module clock
+ - "mod": the display engine module clock (on A83T it's the DE PLL)
- "bus": the bus clock for the whole display engine subsystem
- clock-names: Must contain the clock names described just above
- resets: phandle to the reset control for the display engine subsystem.
@@ -19,7 +20,7 @@ Required properties :
Example:
de2_clocks: clock@1000000 {
- compatible = "allwinner,sun8i-a83t-de2-clk";
+ compatible = "allwinner,sun8i-h3-de2-clk";
reg = <0x01000000 0x100000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index ce1a32bec8bb..98ce9fc6e6c0 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -142,6 +142,18 @@ config COMMON_CLK_GEMINI
This driver supports the SoC clocks on the Cortina Systems Gemini
platform, also known as SL3516 or CS3516.
+config COMMON_CLK_ASPEED
+ bool "Clock driver for Aspeed BMC SoCs"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ default ARCH_ASPEED
+ select MFD_SYSCON
+ select RESET_CONTROLLER
+ ---help---
+ This driver supports the SoC clocks on the Aspeed BMC platforms.
+
+ The G4 and G5 series, including the ast2400 and ast2500, are supported
+ by this driver.
+
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d880d1349c33..71ec41e6364f 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
+obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
@@ -67,7 +68,7 @@ obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_MACH_INGENIC) += ingenic/
obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
obj-$(CONFIG_MACH_LOONGSON32) += loongson1/
-obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
+obj-y += mediatek/
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += meson/
obj-$(CONFIG_MACH_PIC32) += microchip/
ifeq ($(CONFIG_COMMON_CLK), y)
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
new file mode 100644
index 000000000000..9f7f931d6b2f
--- /dev/null
+++ b/drivers/clk/clk-aspeed.c
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#define pr_fmt(fmt) "clk-aspeed: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/aspeed-clock.h>
+
+#define ASPEED_NUM_CLKS 35
+
+#define ASPEED_RESET_CTRL 0x04
+#define ASPEED_CLK_SELECTION 0x08
+#define ASPEED_CLK_STOP_CTRL 0x0c
+#define ASPEED_MPLL_PARAM 0x20
+#define ASPEED_HPLL_PARAM 0x24
+#define AST2500_HPLL_BYPASS_EN BIT(20)
+#define AST2400_HPLL_STRAPPED BIT(18)
+#define AST2400_HPLL_BYPASS_EN BIT(17)
+#define ASPEED_MISC_CTRL 0x2c
+#define UART_DIV13_EN BIT(12)
+#define ASPEED_STRAP 0x70
+#define CLKIN_25MHZ_EN BIT(23)
+#define AST2400_CLK_SOURCE_SEL BIT(18)
+#define ASPEED_CLK_SELECTION_2 0xd8
+
+/* Globally visible clocks */
+static DEFINE_SPINLOCK(aspeed_clk_lock);
+
+/* Keeps track of all clocks */
+static struct clk_hw_onecell_data *aspeed_clk_data;
+
+static void __iomem *scu_base;
+
+/**
+ * struct aspeed_gate_data - Aspeed gated clocks
+ * @clock_idx: bit used to gate this clock in the clock register
+ * @reset_idx: bit used to reset this IP in the reset register. -1 if no
+ * reset is required when enabling the clock
+ * @name: the clock name
+ * @parent_name: the name of the parent clock
+ * @flags: standard clock framework flags
+ */
+struct aspeed_gate_data {
+ u8 clock_idx;
+ s8 reset_idx;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+};
+
+/**
+ * struct aspeed_clk_gate - Aspeed specific clk_gate structure
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register controlling gate
+ * @clock_idx: bit used to gate this clock in the clock register
+ * @reset_idx: bit used to reset this IP in the reset register. -1 if no
+ * reset is required when enabling the clock
+ * @flags: hardware-specific flags
+ * @lock: register lock
+ *
+ * Some of the clocks in the Aspeed SoC must be put in reset before enabling.
+ * This modified version of clk_gate allows an optional reset bit to be
+ * specified.
+ */
+struct aspeed_clk_gate {
+ struct clk_hw hw;
+ struct regmap *map;
+ u8 clock_idx;
+ s8 reset_idx;
+ u8 flags;
+ spinlock_t *lock;
+};
+
+#define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw)
+
+/* TODO: ask Aspeed about the actual parent data */
+static const struct aspeed_gate_data aspeed_gates[] = {
+ /* clk rst name parent flags */
+ [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */
+ [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */
+ [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */
+ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */
+ [ASPEED_CLK_GATE_BCLK] = { 4, 10, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */
+ [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */
+ [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL },
+ [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */
+ [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */
+ [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */
+ [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", NULL, 0 }, /* GFX CRT */
+ [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */
+ [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */
+ [ASPEED_CLK_GATE_UART1CLK] = { 15, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */
+ [ASPEED_CLK_GATE_UART2CLK] = { 16, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */
+ [ASPEED_CLK_GATE_UART5CLK] = { 17, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */
+ [ASPEED_CLK_GATE_ESPICLK] = { 19, -1, "espiclk-gate", NULL, 0 }, /* eSPI */
+ [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac", 0 }, /* MAC1 */
+ [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac", 0 }, /* MAC2 */
+ [ASPEED_CLK_GATE_RSACLK] = { 24, -1, "rsaclk-gate", NULL, 0 }, /* RSA */
+ [ASPEED_CLK_GATE_UART3CLK] = { 25, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */
+ [ASPEED_CLK_GATE_UART4CLK] = { 26, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */
+ [ASPEED_CLK_GATE_SDCLKCLK] = { 27, 16, "sdclk-gate", NULL, 0 }, /* SDIO/SD */
+ [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
+};
+
+static const struct clk_div_table ast2500_mac_div_table[] = {
+ { 0x0, 4 }, /* Yep, really. Aspeed confirmed this is correct */
+ { 0x1, 4 },
+ { 0x2, 6 },
+ { 0x3, 8 },
+ { 0x4, 10 },
+ { 0x5, 12 },
+ { 0x6, 14 },
+ { 0x7, 16 },
+ { 0 }
+};
+
+static const struct clk_div_table ast2400_div_table[] = {
+ { 0x0, 2 },
+ { 0x1, 4 },
+ { 0x2, 6 },
+ { 0x3, 8 },
+ { 0x4, 10 },
+ { 0x5, 12 },
+ { 0x6, 14 },
+ { 0x7, 16 },
+ { 0 }
+};
+
+static const struct clk_div_table ast2500_div_table[] = {
+ { 0x0, 4 },
+ { 0x1, 8 },
+ { 0x2, 12 },
+ { 0x3, 16 },
+ { 0x4, 20 },
+ { 0x5, 24 },
+ { 0x6, 28 },
+ { 0x7, 32 },
+ { 0 }
+};
+
+static struct clk_hw *aspeed_ast2400_calc_pll(const char *name, u32 val)
+{
+ unsigned int mult, div;
+
+ if (val & AST2400_HPLL_BYPASS_EN) {
+ /* Pass through mode */
+ mult = div = 1;
+ } else {
+ /* F = 24Mhz * (2-OD) * [(N + 2) / (D + 1)] */
+ u32 n = (val >> 5) & 0x3f;
+ u32 od = (val >> 4) & 0x1;
+ u32 d = val & 0xf;
+
+ mult = (2 - od) * (n + 2);
+ div = d + 1;
+ }
+ return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
+ mult, div);
+};
+
+static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val)
+{
+ unsigned int mult, div;
+
+ if (val & AST2500_HPLL_BYPASS_EN) {
+ /* Pass through mode */
+ mult = div = 1;
+ } else {
+ /* F = clkin * [(M+1) / (N+1)] / (P + 1) */
+ u32 p = (val >> 13) & 0x3f;
+ u32 m = (val >> 5) & 0xff;
+ u32 n = val & 0x1f;
+
+ mult = (m + 1) / (n + 1);
+ div = p + 1;
+ }
+
+ return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
+ mult, div);
+}
+
+struct aspeed_clk_soc_data {
+ const struct clk_div_table *div_table;
+ const struct clk_div_table *mac_div_table;
+ struct clk_hw *(*calc_pll)(const char *name, u32 val);
+};
+
+static const struct aspeed_clk_soc_data ast2500_data = {
+ .div_table = ast2500_div_table,
+ .mac_div_table = ast2500_mac_div_table,
+ .calc_pll = aspeed_ast2500_calc_pll,
+};
+
+static const struct aspeed_clk_soc_data ast2400_data = {
+ .div_table = ast2400_div_table,
+ .mac_div_table = ast2400_div_table,
+ .calc_pll = aspeed_ast2400_calc_pll,
+};
+
+static int aspeed_clk_enable(struct clk_hw *hw)
+{
+ struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+ unsigned long flags;
+ u32 clk = BIT(gate->clock_idx);
+ u32 rst = BIT(gate->reset_idx);
+ u32 enval;
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->reset_idx >= 0) {
+ /* Put IP in reset */
+ regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
+
+ /* Delay 100us */
+ udelay(100);
+ }
+
+ /* Enable clock */
+ enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
+ regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval);
+
+ if (gate->reset_idx >= 0) {
+ /* A delay of 10ms is specified by the ASPEED docs */
+ mdelay(10);
+
+ /* Take IP out of reset */
+ regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0);
+ }
+
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return 0;
+}
+
+static void aspeed_clk_disable(struct clk_hw *hw)
+{
+ struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+ unsigned long flags;
+ u32 clk = BIT(gate->clock_idx);
+ u32 enval;
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? clk : 0;
+ regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval);
+
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int aspeed_clk_is_enabled(struct clk_hw *hw)
+{
+ struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+ u32 clk = BIT(gate->clock_idx);
+ u32 reg;
+
+ regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
+
+ return (reg & clk) ? 0 : 1;
+}
+
+static const struct clk_ops aspeed_clk_gate_ops = {
+ .enable = aspeed_clk_enable,
+ .disable = aspeed_clk_disable,
+ .is_enabled = aspeed_clk_is_enabled,
+};
+
+/**
+ * struct aspeed_reset - Aspeed reset controller
+ * @map: regmap to access the containing system controller
+ * @rcdev: reset controller device
+ */
+struct aspeed_reset {
+ struct regmap *map;
+ struct reset_controller_dev rcdev;
+};
+
+#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
+
+static const u8 aspeed_resets[] = {
+ [ASPEED_RESET_XDMA] = 25,
+ [ASPEED_RESET_MCTP] = 24,
+ [ASPEED_RESET_ADC] = 23,
+ [ASPEED_RESET_JTAG_MASTER] = 22,
+ [ASPEED_RESET_MIC] = 18,
+ [ASPEED_RESET_PWM] = 9,
+ [ASPEED_RESET_PCIVGA] = 8,
+ [ASPEED_RESET_I2C] = 2,
+ [ASPEED_RESET_AHB] = 1,
+};
+
+static int aspeed_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 rst = BIT(aspeed_resets[id]);
+
+ return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, 0);
+}
+
+static int aspeed_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 rst = BIT(aspeed_resets[id]);
+
+ return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, rst);
+}
+
+static int aspeed_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 val, rst = BIT(aspeed_resets[id]);
+ int ret;
+
+ ret = regmap_read(ar->map, ASPEED_RESET_CTRL, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & rst);
+}
+
+static const struct reset_control_ops aspeed_reset_ops = {
+ .assert = aspeed_reset_assert,
+ .deassert = aspeed_reset_deassert,
+ .status = aspeed_reset_status,
+};
+
+static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ struct regmap *map, u8 clock_idx, u8 reset_idx,
+ u8 clk_gate_flags, spinlock_t *lock)
+{
+ struct aspeed_clk_gate *gate;
+ struct clk_init_data init;
+ struct clk_hw *hw;
+ int ret;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &aspeed_clk_gate_ops;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ gate->map = map;
+ gate->clock_idx = clock_idx;
+ gate->reset_idx = reset_idx;
+ gate->flags = clk_gate_flags;
+ gate->lock = lock;
+ gate->hw.init = &init;
+
+ hw = &gate->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(gate);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+
+static int aspeed_clk_probe(struct platform_device *pdev)
+{
+ const struct aspeed_clk_soc_data *soc_data;
+ struct device *dev = &pdev->dev;
+ struct aspeed_reset *ar;
+ struct regmap *map;
+ struct clk_hw *hw;
+ u32 val, rate;
+ int i, ret;
+
+ map = syscon_node_to_regmap(dev->of_node);
+ if (IS_ERR(map)) {
+ dev_err(dev, "no syscon regmap\n");
+ return PTR_ERR(map);
+ }
+
+ ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
+ if (!ar)
+ return -ENOMEM;
+
+ ar->map = map;
+ ar->rcdev.owner = THIS_MODULE;
+ ar->rcdev.nr_resets = ARRAY_SIZE(aspeed_resets);
+ ar->rcdev.ops = &aspeed_reset_ops;
+ ar->rcdev.of_node = dev->of_node;
+
+ ret = devm_reset_controller_register(dev, &ar->rcdev);
+ if (ret) {
+ dev_err(dev, "could not register reset controller\n");
+ return ret;
+ }
+
+ /* SoC generations share common layouts but have different divisors */
+ soc_data = of_device_get_match_data(dev);
+ if (!soc_data) {
+ dev_err(dev, "no match data for platform\n");
+ return -EINVAL;
+ }
+
+ /* UART clock div13 setting */
+ regmap_read(map, ASPEED_MISC_CTRL, &val);
+ if (val & UART_DIV13_EN)
+ rate = 24000000 / 13;
+ else
+ rate = 24000000;
+ /* TODO: Find the parent data for the uart clock */
+ hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_clk_data->hws[ASPEED_CLK_UART] = hw;
+
+ /*
+ * Memory controller (M-PLL) PLL. This clock is configured by the
+ * bootloader, and is exposed to Linux as a read-only clock rate.
+ */
+ regmap_read(map, ASPEED_MPLL_PARAM, &val);
+ hw = soc_data->calc_pll("mpll", val);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_clk_data->hws[ASPEED_CLK_MPLL] = hw;
+
+ /* SD/SDIO clock divider (TODO: There's a gate too) */
+ hw = clk_hw_register_divider_table(dev, "sdio", "hpll", 0,
+ scu_base + ASPEED_CLK_SELECTION, 12, 3, 0,
+ soc_data->div_table,
+ &aspeed_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_clk_data->hws[ASPEED_CLK_SDIO] = hw;
+
+ /* MAC AHB bus clock divider */
+ hw = clk_hw_register_divider_table(dev, "mac", "hpll", 0,
+ scu_base + ASPEED_CLK_SELECTION, 16, 3, 0,
+ soc_data->mac_div_table,
+ &aspeed_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_clk_data->hws[ASPEED_CLK_MAC] = hw;
+
+ /* LPC Host (LHCLK) clock divider */
+ hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
+ scu_base + ASPEED_CLK_SELECTION, 20, 3, 0,
+ soc_data->div_table,
+ &aspeed_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_clk_data->hws[ASPEED_CLK_LHCLK] = hw;
+
+ /* P-Bus (BCLK) clock divider */
+ hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0,
+ scu_base + ASPEED_CLK_SELECTION_2, 0, 2, 0,
+ soc_data->div_table,
+ &aspeed_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw;
+
+ /*
+ * TODO: There are a number of clocks that not included in this driver
+ * as more information is required:
+ * D2-PLL
+ * D-PLL
+ * YCLK
+ * RGMII
+ * RMII
+ * UART[1..5] clock source mux
+ * Video Engine (ECLK) mux and clock divider
+ */
+
+ for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
+ const struct aspeed_gate_data *gd = &aspeed_gates[i];
+ u32 gate_flags;
+
+ /* Special case: the USB port 1 clock (bit 14) is always
+ * working the opposite way from the other ones.
+ */
+ gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE;
+ hw = aspeed_clk_hw_register_gate(dev,
+ gd->name,
+ gd->parent_name,
+ gd->flags,
+ map,
+ gd->clock_idx,
+ gd->reset_idx,
+ gate_flags,
+ &aspeed_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_clk_data->hws[i] = hw;
+ }
+
+ return 0;
+};
+
+static const struct of_device_id aspeed_clk_dt_ids[] = {
+ { .compatible = "aspeed,ast2400-scu", .data = &ast2400_data },
+ { .compatible = "aspeed,ast2500-scu", .data = &ast2500_data },
+ { }
+};
+
+static struct platform_driver aspeed_clk_driver = {
+ .probe = aspeed_clk_probe,
+ .driver = {
+ .name = "aspeed-clk",
+ .of_match_table = aspeed_clk_dt_ids,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(aspeed_clk_driver);
+
+static void __init aspeed_ast2400_cc(struct regmap *map)
+{
+ struct clk_hw *hw;
+ u32 val, freq, div;
+
+ /*
+ * CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by
+ * strapping
+ */
+ regmap_read(map, ASPEED_STRAP, &val);
+ if (val & CLKIN_25MHZ_EN)
+ freq = 25000000;
+ else if (val & AST2400_CLK_SOURCE_SEL)
+ freq = 48000000;
+ else
+ freq = 24000000;
+ hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq);
+ pr_debug("clkin @%u MHz\n", freq / 1000000);
+
+ /*
+ * High-speed PLL clock derived from the crystal. This the CPU clock,
+ * and we assume that it is enabled
+ */
+ regmap_read(map, ASPEED_HPLL_PARAM, &val);
+ WARN(val & AST2400_HPLL_STRAPPED, "hpll is strapped not configured");
+ aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2400_calc_pll("hpll", val);
+
+ /*
+ * Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK)
+ * 00: Select CPU:AHB = 1:1
+ * 01: Select CPU:AHB = 2:1
+ * 10: Select CPU:AHB = 4:1
+ * 11: Select CPU:AHB = 3:1
+ */
+ regmap_read(map, ASPEED_STRAP, &val);
+ val = (val >> 10) & 0x3;
+ div = val + 1;
+ if (div == 3)
+ div = 4;
+ else if (div == 4)
+ div = 3;
+ hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
+ aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
+
+ /* APB clock clock selection register SCU08 (aka PCLK) */
+ hw = clk_hw_register_divider_table(NULL, "apb", "hpll", 0,
+ scu_base + ASPEED_CLK_SELECTION, 23, 3, 0,
+ ast2400_div_table,
+ &aspeed_clk_lock);
+ aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
+}
+
+static void __init aspeed_ast2500_cc(struct regmap *map)
+{
+ struct clk_hw *hw;
+ u32 val, freq, div;
+
+ /* CLKIN is the crystal oscillator, 24 or 25MHz selected by strapping */
+ regmap_read(map, ASPEED_STRAP, &val);
+ if (val & CLKIN_25MHZ_EN)
+ freq = 25000000;
+ else
+ freq = 24000000;
+ hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq);
+ pr_debug("clkin @%u MHz\n", freq / 1000000);
+
+ /*
+ * High-speed PLL clock derived from the crystal. This the CPU clock,
+ * and we assume that it is enabled
+ */
+ regmap_read(map, ASPEED_HPLL_PARAM, &val);
+ aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2500_calc_pll("hpll", val);
+
+ /* Strap bits 11:9 define the AXI/AHB clock frequency ratio (aka HCLK)*/
+ regmap_read(map, ASPEED_STRAP, &val);
+ val = (val >> 9) & 0x7;
+ WARN(val == 0, "strapping is zero: cannot determine ahb clock");
+ div = 2 * (val + 1);
+ hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
+ aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
+
+ /* APB clock clock selection register SCU08 (aka PCLK) */
+ regmap_read(map, ASPEED_CLK_SELECTION, &val);
+ val = (val >> 23) & 0x7;
+ div = 4 * (val + 1);
+ hw = clk_hw_register_fixed_factor(NULL, "apb", "hpll", 0, 1, div);
+ aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
+};
+
+static void __init aspeed_cc_init(struct device_node *np)
+{
+ struct regmap *map;
+ u32 val;
+ int ret;
+ int i;
+
+ scu_base = of_iomap(np, 0);
+ if (!scu_base)
+ return;
+
+ aspeed_clk_data = kzalloc(sizeof(*aspeed_clk_data) +
+ sizeof(*aspeed_clk_data->hws) * ASPEED_NUM_CLKS,
+ GFP_KERNEL);
+ if (!aspeed_clk_data)
+ return;
+
+ /*
+ * This way all clocks fetched before the platform device probes,
+ * except those we assign here for early use, will be deferred.
+ */
+ for (i = 0; i < ASPEED_NUM_CLKS; i++)
+ aspeed_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
+
+ map = syscon_node_to_regmap(np);
+ if (IS_ERR(map)) {
+ pr_err("no syscon regmap\n");
+ return;
+ }
+ /*
+ * We check that the regmap works on this very first access,
+ * but as this is an MMIO-backed regmap, subsequent regmap
+ * access is not going to fail and we skip error checks from
+ * this point.
+ */
+ ret = regmap_read(map, ASPEED_STRAP, &val);
+ if (ret) {
+ pr_err("failed to read strapping register\n");
+ return;
+ }
+
+ if (of_device_is_compatible(np, "aspeed,ast2400-scu"))
+ aspeed_ast2400_cc(map);
+ else if (of_device_is_compatible(np, "aspeed,ast2500-scu"))
+ aspeed_ast2500_cc(map);
+ else
+ pr_err("unknown platform, failed to add clocks\n");
+
+ aspeed_clk_data->num = ASPEED_NUM_CLKS;
+ ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_clk_data);
+ if (ret)
+ pr_err("failed to add DT provider: %d\n", ret);
+};
+CLK_OF_DECLARE_DRIVER(aspeed_cc_g5, "aspeed,ast2500-scu", aspeed_cc_init);
+CLK_OF_DECLARE_DRIVER(aspeed_cc_g4, "aspeed,ast2400-scu", aspeed_cc_init);
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 32867dda6c1c..98f89ccc46a7 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -144,10 +144,18 @@ static unsigned long clk_enable_lock(void)
{
unsigned long flags;
- if (!spin_trylock_irqsave(&enable_lock, flags)) {
+ /*
+ * On UP systems, spin_trylock_irqsave() always returns true, even if
+ * we already hold the lock. So, in that case, we rely only on
+ * reference counting.
+ */
+ if (!IS_ENABLED(CONFIG_SMP) ||
+ !spin_trylock_irqsave(&enable_lock, flags)) {
if (enable_owner == current) {
enable_refcnt++;
__acquire(enable_lock);
+ if (!IS_ENABLED(CONFIG_SMP))
+ local_save_flags(flags);
return flags;
}
spin_lock_irqsave(&enable_lock, flags);
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 59dc0aad553c..1f9ea0f21df1 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -1,136 +1,140 @@
#
-# MediaTek SoC drivers
+# MediaTek Clock Drivers
#
+menu "Clock driver for MediaTek SoC"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+
config COMMON_CLK_MEDIATEK
bool
+ select RESET_CONTROLLER
---help---
- Mediatek SoCs' clock support.
+ MediaTek SoCs' clock support.
config COMMON_CLK_MT2701
- bool "Clock driver for Mediatek MT2701"
+ bool "Clock driver for MediaTek MT2701"
depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
select COMMON_CLK_MEDIATEK
default ARCH_MEDIATEK && ARM
---help---
- This driver supports Mediatek MT2701 basic clocks.
+ This driver supports MediaTek MT2701 basic clocks.
config COMMON_CLK_MT2701_MMSYS
- bool "Clock driver for Mediatek MT2701 mmsys"
+ bool "Clock driver for MediaTek MT2701 mmsys"
depends on COMMON_CLK_MT2701
---help---
- This driver supports Mediatek MT2701 mmsys clocks.
+ This driver supports MediaTek MT2701 mmsys clocks.
config COMMON_CLK_MT2701_IMGSYS
- bool "Clock driver for Mediatek MT2701 imgsys"
+ bool "Clock driver for MediaTek MT2701 imgsys"
depends on COMMON_CLK_MT2701
---help---
- This driver supports Mediatek MT2701 imgsys clocks.
+ This driver supports MediaTek MT2701 imgsys clocks.
config COMMON_CLK_MT2701_VDECSYS
- bool "Clock driver for Mediatek MT2701 vdecsys"
+ bool "Clock driver for MediaTek MT2701 vdecsys"
depends on COMMON_CLK_MT2701
---help---
- This driver supports Mediatek MT2701 vdecsys clocks.
+ This driver supports MediaTek MT2701 vdecsys clocks.
config COMMON_CLK_MT2701_HIFSYS
- bool "Clock driver for Mediatek MT2701 hifsys"
+ bool "Clock driver for MediaTek MT2701 hifsys"
depends on COMMON_CLK_MT2701
---help---
- This driver supports Mediatek MT2701 hifsys clocks.
+ This driver supports MediaTek MT2701 hifsys clocks.
config COMMON_CLK_MT2701_ETHSYS
- bool "Clock driver for Mediatek MT2701 ethsys"
+ bool "Clock driver for MediaTek MT2701 ethsys"
depends on COMMON_CLK_MT2701
---help---
- This driver supports Mediatek MT2701 ethsys clocks.
+ This driver supports MediaTek MT2701 ethsys clocks.
config COMMON_CLK_MT2701_BDPSYS
- bool "Clock driver for Mediatek MT2701 bdpsys"
+ bool "Clock driver for MediaTek MT2701 bdpsys"
depends on COMMON_CLK_MT2701
---help---
- This driver supports Mediatek MT2701 bdpsys clocks.
+ This driver supports MediaTek MT2701 bdpsys clocks.
config COMMON_CLK_MT2712
- bool "Clock driver for Mediatek MT2712"
+ bool "Clock driver for MediaTek MT2712"
depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
select COMMON_CLK_MEDIATEK
default ARCH_MEDIATEK && ARM64
---help---
- This driver supports Mediatek MT2712 basic clocks.
+ This driver supports MediaTek MT2712 basic clocks.
config COMMON_CLK_MT2712_BDPSYS
- bool "Clock driver for Mediatek MT2712 bdpsys"
+ bool "Clock driver for MediaTek MT2712 bdpsys"
depends on COMMON_CLK_MT2712
---help---
- This driver supports Mediatek MT2712 bdpsys clocks.
+ This driver supports MediaTek MT2712 bdpsys clocks.
config COMMON_CLK_MT2712_IMGSYS
- bool "Clock driver for Mediatek MT2712 imgsys"
+ bool "Clock driver for MediaTek MT2712 imgsys"
depends on COMMON_CLK_MT2712
---help---
- This driver supports Mediatek MT2712 imgsys clocks.
+ This driver supports MediaTek MT2712 imgsys clocks.
config COMMON_CLK_MT2712_JPGDECSYS
- bool "Clock driver for Mediatek MT2712 jpgdecsys"
+ bool "Clock driver for MediaTek MT2712 jpgdecsys"
depends on COMMON_CLK_MT2712
---help---
- This driver supports Mediatek MT2712 jpgdecsys clocks.
+ This driver supports MediaTek MT2712 jpgdecsys clocks.
config COMMON_CLK_MT2712_MFGCFG
- bool "Clock driver for Mediatek MT2712 mfgcfg"
+ bool "Clock driver for MediaTek MT2712 mfgcfg"
depends on COMMON_CLK_MT2712
---help---
- This driver supports Mediatek MT2712 mfgcfg clocks.
+ This driver supports MediaTek MT2712 mfgcfg clocks.
config COMMON_CLK_MT2712_MMSYS
- bool "Clock driver for Mediatek MT2712 mmsys"
+ bool "Clock driver for MediaTek MT2712 mmsys"
depends on COMMON_CLK_MT2712
---help---
- This driver supports Mediatek MT2712 mmsys clocks.
+ This driver supports MediaTek MT2712 mmsys clocks.
config COMMON_CLK_MT2712_VDECSYS
- bool "Clock driver for Mediatek MT2712 vdecsys"
+ bool "Clock driver for MediaTek MT2712 vdecsys"
depends on COMMON_CLK_MT2712
---help---
- This driver supports Mediatek MT2712 vdecsys clocks.
+ This driver supports MediaTek MT2712 vdecsys clocks.
config COMMON_CLK_MT2712_VENCSYS
- bool "Clock driver for Mediatek MT2712 vencsys"
+ bool "Clock driver for MediaTek MT2712 vencsys"
depends on COMMON_CLK_MT2712
---help---
- This driver supports Mediatek MT2712 vencsys clocks.
+ This driver supports MediaTek MT2712 vencsys clocks.
config COMMON_CLK_MT6797
- bool "Clock driver for Mediatek MT6797"
+ bool "Clock driver for MediaTek MT6797"
depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
select COMMON_CLK_MEDIATEK
default ARCH_MEDIATEK && ARM64
---help---
- This driver supports Mediatek MT6797 basic clocks.
+ This driver supports MediaTek MT6797 basic clocks.
config COMMON_CLK_MT6797_MMSYS
- bool "Clock driver for Mediatek MT6797 mmsys"
+ bool "Clock driver for MediaTek MT6797 mmsys"
depends on COMMON_CLK_MT6797
---help---
- This driver supports Mediatek MT6797 mmsys clocks.
+ This driver supports MediaTek MT6797 mmsys clocks.
config COMMON_CLK_MT6797_IMGSYS
- bool "Clock driver for Mediatek MT6797 imgsys"
+ bool "Clock driver for MediaTek MT6797 imgsys"
depends on COMMON_CLK_MT6797
---help---
- This driver supports Mediatek MT6797 imgsys clocks.
+ This driver supports MediaTek MT6797 imgsys clocks.
config COMMON_CLK_MT6797_VDECSYS
- bool "Clock driver for Mediatek MT6797 vdecsys"
+ bool "Clock driver for MediaTek MT6797 vdecsys"
depends on COMMON_CLK_MT6797
---help---
- This driver supports Mediatek MT6797 vdecsys clocks.
+ This driver supports MediaTek MT6797 vdecsys clocks.
config COMMON_CLK_MT6797_VENCSYS
- bool "Clock driver for Mediatek MT6797 vencsys"
+ bool "Clock driver for MediaTek MT6797 vencsys"
depends on COMMON_CLK_MT6797
---help---
- This driver supports Mediatek MT6797 vencsys clocks.
+ This driver supports MediaTek MT6797 vencsys clocks.
config COMMON_CLK_MT7622
bool "Clock driver for MediaTek MT7622"
@@ -163,17 +167,18 @@ config COMMON_CLK_MT7622_AUDSYS
to audio consumers such as I2S and TDM.
config COMMON_CLK_MT8135
- bool "Clock driver for Mediatek MT8135"
+ bool "Clock driver for MediaTek MT8135"
depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
select COMMON_CLK_MEDIATEK
default ARCH_MEDIATEK && ARM
---help---
- This driver supports Mediatek MT8135 clocks.
+ This driver supports MediaTek MT8135 clocks.
config COMMON_CLK_MT8173
- bool "Clock driver for Mediatek MT8173"
+ bool "Clock driver for MediaTek MT8173"
depends on ARCH_MEDIATEK || COMPILE_TEST
select COMMON_CLK_MEDIATEK
default ARCH_MEDIATEK
---help---
- This driver supports Mediatek MT8173 clocks.
+ This driver supports MediaTek MT8173 clocks.
+endmenu
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index c421ffcd49ff..5160fdc4bbb8 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o
-obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o reset.o
obj-$(CONFIG_COMMON_CLK_MT6797) += clk-mt6797.o
obj-$(CONFIG_COMMON_CLK_MT6797_IMGSYS) += clk-mt6797-img.o
obj-$(CONFIG_COMMON_CLK_MT6797_MMSYS) += clk-mt6797-mm.o
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index f10250dcece4..f83c2bbb677e 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -20,6 +20,7 @@
#include <linux/clk-provider.h>
struct clk;
+struct clk_onecell_data;
#define MAX_MUX_GATE_BIT 31
#define INVALID_MUX_GATE_BIT (MAX_MUX_GATE_BIT + 1)
@@ -228,14 +229,7 @@ void mtk_clk_register_plls(struct device_node *node,
struct clk *mtk_clk_register_ref2usb_tx(const char *name,
const char *parent_name, void __iomem *reg);
-#ifdef CONFIG_RESET_CONTROLLER
void mtk_register_reset_controller(struct device_node *np,
unsigned int num_regs, int regofs);
-#else
-static inline void mtk_register_reset_controller(struct device_node *np,
- unsigned int num_regs, int regofs)
-{
-}
-#endif
#endif /* __DRV_CLK_MTK_H */
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 2bb4cabf802f..ee9c12cf3f08 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -400,28 +400,45 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
BIT(31), /* gate */
0);
+/*
+ * MMC clocks are the new timing mode (see A83T & H3) variety, but without
+ * the mode switch. This means they have a 2x post divider between the clock
+ * and the MMC module. This is not documented in the manual, but is taken
+ * into consideration when setting the mmc module clocks in the BSP kernel.
+ * Without it, MMC performance is degraded.
+ *
+ * We model it here to be consistent with other SoCs supporting this mode.
+ * The alternative would be to add the 2x multiplier when setting the MMC
+ * module clock in the MMC driver, just for the A64.
+ */
static const char * const mmc_default_parents[] = { "osc24M", "pll-periph0-2x",
"pll-periph1-2x" };
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_default_parents, 0x088,
- 0, 4, /* M */
- 16, 2, /* P */
- 24, 2, /* mux */
- BIT(31), /* gate */
- 0);
-
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_default_parents, 0x08c,
- 0, 4, /* M */
- 16, 2, /* P */
- 24, 2, /* mux */
- BIT(31), /* gate */
- 0);
-
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_default_parents, 0x090,
- 0, 4, /* M */
- 16, 2, /* P */
- 24, 2, /* mux */
- BIT(31), /* gate */
- 0);
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0",
+ mmc_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1",
+ mmc_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2",
+ mmc_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
index 5cedcd0d8be8..7d08015b980d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
@@ -76,15 +76,26 @@ static struct ccu_mult pll_c1cpux_clk = {
*/
#define SUN8I_A83T_PLL_AUDIO_REG 0x008
+/* clock rates doubled for post divider */
+static struct ccu_sdm_setting pll_audio_sdm_table[] = {
+ { .rate = 45158400, .pattern = 0xc00121ff, .m = 29, .n = 54 },
+ { .rate = 49152000, .pattern = 0xc000e147, .m = 30, .n = 61 },
+};
+
static struct ccu_nm pll_audio_clk = {
.enable = BIT(31),
.lock = BIT(2),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(0, 6),
+ .fixed_post_div = 2,
+ .sdm = _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
+ 0x284, BIT(31)),
.common = {
.reg = SUN8I_A83T_PLL_AUDIO_REG,
.lock_reg = CCU_SUN8I_A83T_LOCK_REG,
- .features = CCU_FEATURE_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG |
+ CCU_FEATURE_FIXED_POSTDIV |
+ CCU_FEATURE_SIGMA_DELTA_MOD,
.hw.init = CLK_HW_INIT("pll-audio", "osc24M",
&ccu_nm_ops, CLK_SET_RATE_UNGATE),
},
@@ -493,8 +504,8 @@ static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
0x118, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
static const char * const tcon1_parents[] = { "pll-video1" };
-static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon1_parents,
- 0x11c, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_clk, "tcon1", tcon1_parents,
+ 0x11c, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", 0x130, BIT(16), 0);
@@ -889,9 +900,10 @@ static int sun8i_a83t_ccu_probe(struct platform_device *pdev)
if (IS_ERR(reg))
return PTR_ERR(reg);
- /* Enforce d1 = 0, d2 = 0 for Audio PLL */
+ /* Enforce d1 = 0, d2 = 1 for Audio PLL */
val = readl(reg + SUN8I_A83T_PLL_AUDIO_REG);
- val &= ~(BIT(16) | BIT(18));
+ val &= ~BIT(16);
+ val |= BIT(18);
writel(val, reg + SUN8I_A83T_PLL_AUDIO_REG);
/* Enforce P = 1 for both CPU cluster PLLs */
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 5cc9d9952121..468d1abaf0ee 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -41,6 +41,8 @@ static SUNXI_CCU_GATE(wb_clk, "wb", "wb-div",
static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
+ CLK_SET_RATE_PARENT);
static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
CLK_SET_RATE_PARENT);
@@ -65,6 +67,20 @@ static struct ccu_common *sun8i_a83t_de2_clks[] = {
&wb_div_a83_clk.common,
};
+static struct ccu_common *sun8i_h3_de2_clks[] = {
+ &mixer0_clk.common,
+ &mixer1_clk.common,
+ &wb_clk.common,
+
+ &bus_mixer0_clk.common,
+ &bus_mixer1_clk.common,
+ &bus_wb_clk.common,
+
+ &mixer0_div_clk.common,
+ &mixer1_div_clk.common,
+ &wb_div_clk.common,
+};
+
static struct ccu_common *sun8i_v3s_de2_clks[] = {
&mixer0_clk.common,
&wb_clk.common,
@@ -93,6 +109,23 @@ static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
.num = CLK_NUMBER,
};
+static struct clk_hw_onecell_data sun8i_h3_de2_hw_clks = {
+ .hws = {
+ [CLK_MIXER0] = &mixer0_clk.common.hw,
+ [CLK_MIXER1] = &mixer1_clk.common.hw,
+ [CLK_WB] = &wb_clk.common.hw,
+
+ [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
+ [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
+ [CLK_BUS_WB] = &bus_wb_clk.common.hw,
+
+ [CLK_MIXER0_DIV] = &mixer0_div_clk.common.hw,
+ [CLK_MIXER1_DIV] = &mixer1_div_clk.common.hw,
+ [CLK_WB_DIV] = &wb_div_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
static struct clk_hw_onecell_data sun8i_v3s_de2_hw_clks = {
.hws = {
[CLK_MIXER0] = &mixer0_clk.common.hw,
@@ -133,11 +166,21 @@ static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
.num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets),
};
+static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = {
+ .ccu_clks = sun8i_h3_de2_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_h3_de2_clks),
+
+ .hw_clks = &sun8i_h3_de2_hw_clks,
+
+ .resets = sun8i_a83t_de2_resets,
+ .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
- .ccu_clks = sun8i_a83t_de2_clks,
- .num_ccu_clks = ARRAY_SIZE(sun8i_a83t_de2_clks),
+ .ccu_clks = sun8i_h3_de2_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_h3_de2_clks),
- .hw_clks = &sun8i_a83t_de2_hw_clks,
+ .hw_clks = &sun8i_h3_de2_hw_clks,
.resets = sun50i_a64_de2_resets,
.num_resets = ARRAY_SIZE(sun50i_a64_de2_resets),
@@ -238,6 +281,10 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
.data = &sun8i_a83t_de2_clk_desc,
},
{
+ .compatible = "allwinner,sun8i-h3-de2-clk",
+ .data = &sun8i_h3_de2_clk_desc,
+ },
+ {
.compatible = "allwinner,sun8i-v3s-de2-clk",
.data = &sun8i_v3s_de2_clk_desc,
},
diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
index 688855e7dc8c..5d0af4051737 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.c
+++ b/drivers/clk/sunxi-ng/ccu_mp.c
@@ -50,12 +50,19 @@ static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
unsigned int max_m, max_p;
unsigned int m, p;
+ if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate *= cmp->fixed_post_div;
+
max_m = cmp->m.max ?: 1 << cmp->m.width;
max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
+ rate = *parent_rate / p / m;
+
+ if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= cmp->fixed_post_div;
- return *parent_rate / p / m;
+ return rate;
}
static void ccu_mp_disable(struct clk_hw *hw)
@@ -83,6 +90,7 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
+ unsigned long rate;
unsigned int m, p;
u32 reg;
@@ -101,7 +109,11 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
p = reg >> cmp->p.shift;
p &= (1 << cmp->p.width) - 1;
- return (parent_rate >> p) / m;
+ rate = (parent_rate >> p) / m;
+ if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= cmp->fixed_post_div;
+
+ return rate;
}
static int ccu_mp_determine_rate(struct clk_hw *hw,
@@ -129,6 +141,10 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
max_m = cmp->m.max ?: 1 << cmp->m.width;
max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
+ /* Adjust target rate according to post-dividers */
+ if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate = rate * cmp->fixed_post_div;
+
ccu_mp_find_best(parent_rate, rate, max_m, max_p, &m, &p);
spin_lock_irqsave(cmp->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_mp.h b/drivers/clk/sunxi-ng/ccu_mp.h
index aaef11d747ea..5107635e61de 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.h
+++ b/drivers/clk/sunxi-ng/ccu_mp.h
@@ -33,9 +33,33 @@ struct ccu_mp {
struct ccu_div_internal m;
struct ccu_div_internal p;
struct ccu_mux_internal mux;
+
+ unsigned int fixed_post_div;
+
struct ccu_common common;
};
+#define SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(_struct, _name, _parents, _reg, \
+ _mshift, _mwidth, \
+ _pshift, _pwidth, \
+ _muxshift, _muxwidth, \
+ _gate, _postdiv, _flags) \
+ struct ccu_mp _struct = { \
+ .enable = _gate, \
+ .m = _SUNXI_CCU_DIV(_mshift, _mwidth), \
+ .p = _SUNXI_CCU_DIV(_pshift, _pwidth), \
+ .mux = _SUNXI_CCU_MUX(_muxshift, _muxwidth), \
+ .fixed_post_div = _postdiv, \
+ .common = { \
+ .reg = _reg, \
+ .features = CCU_FEATURE_FIXED_POSTDIV, \
+ .hw.init = CLK_HW_INIT_PARENTS(_name, \
+ _parents, \
+ &ccu_mp_ops, \
+ _flags), \
+ } \
+ }
+
#define SUNXI_CCU_MP_WITH_MUX_GATE(_struct, _name, _parents, _reg, \
_mshift, _mwidth, \
_pshift, _pwidth, \
diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index 7620aa973a6e..a16de092bf94 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -70,11 +70,18 @@ static unsigned long ccu_nm_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ccu_nm *nm = hw_to_ccu_nm(hw);
+ unsigned long rate;
unsigned long n, m;
u32 reg;
- if (ccu_frac_helper_is_enabled(&nm->common, &nm->frac))
- return ccu_frac_helper_read_rate(&nm->common, &nm->frac);
+ if (ccu_frac_helper_is_enabled(&nm->common, &nm->frac)) {
+ rate = ccu_frac_helper_read_rate(&nm->common, &nm->frac);
+
+ if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= nm->fixed_post_div;
+
+ return rate;
+ }
reg = readl(nm->common.base + nm->common.reg);
@@ -90,15 +97,15 @@ static unsigned long ccu_nm_recalc_rate(struct clk_hw *hw,
if (!m)
m++;
- if (ccu_sdm_helper_is_enabled(&nm->common, &nm->sdm)) {
- unsigned long rate =
- ccu_sdm_helper_read_rate(&nm->common, &nm->sdm,
- m, n);
- if (rate)
- return rate;
- }
+ if (ccu_sdm_helper_is_enabled(&nm->common, &nm->sdm))
+ rate = ccu_sdm_helper_read_rate(&nm->common, &nm->sdm, m, n);
+ else
+ rate = parent_rate * n / m;
+
+ if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= nm->fixed_post_div;
- return parent_rate * n / m;
+ return rate;
}
static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -107,11 +114,20 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
struct ccu_nm *nm = hw_to_ccu_nm(hw);
struct _ccu_nm _nm;
- if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate))
+ if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate *= nm->fixed_post_div;
+
+ if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
+ if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= nm->fixed_post_div;
return rate;
+ }
- if (ccu_sdm_helper_has_rate(&nm->common, &nm->sdm, rate))
+ if (ccu_sdm_helper_has_rate(&nm->common, &nm->sdm, rate)) {
+ if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= nm->fixed_post_div;
return rate;
+ }
_nm.min_n = nm->n.min ?: 1;
_nm.max_n = nm->n.max ?: 1 << nm->n.width;
@@ -119,8 +135,12 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
_nm.max_m = nm->m.max ?: 1 << nm->m.width;
ccu_nm_find_best(*parent_rate, rate, &_nm);
+ rate = *parent_rate * _nm.n / _nm.m;
+
+ if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= nm->fixed_post_div;
- return *parent_rate * _nm.n / _nm.m;
+ return rate;
}
static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -131,6 +151,10 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags;
u32 reg;
+ /* Adjust target rate according to post-dividers */
+ if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate = rate * nm->fixed_post_div;
+
if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
spin_lock_irqsave(nm->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_nm.h b/drivers/clk/sunxi-ng/ccu_nm.h
index c623b0c7a23c..eba586b4c7d0 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.h
+++ b/drivers/clk/sunxi-ng/ccu_nm.h
@@ -36,6 +36,8 @@ struct ccu_nm {
struct ccu_frac_internal frac;
struct ccu_sdm_internal sdm;
+ unsigned int fixed_post_div;
+
struct ccu_common common;
};
diff --git a/drivers/clk/sunxi/clk-sun8i-apb0.c b/drivers/clk/sunxi/clk-sun8i-apb0.c
index ea1eed24778c..d5c31804ee54 100644
--- a/drivers/clk/sunxi/clk-sun8i-apb0.c
+++ b/drivers/clk/sunxi/clk-sun8i-apb0.c
@@ -98,10 +98,7 @@ static int sun8i_a23_apb0_clk_probe(struct platform_device *pdev)
return PTR_ERR(reg);
clk = sun8i_a23_apb0_register(np, reg);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
- return 0;
+ return PTR_ERR_OR_ZERO(clk);
}
static const struct of_device_id sun8i_a23_apb0_clk_dt_ids[] = {
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
new file mode 100644
index 000000000000..d3558d897a4d
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK 0
+#define ASPEED_CLK_GATE_GCLK 1
+#define ASPEED_CLK_GATE_MCLK 2
+#define ASPEED_CLK_GATE_VCLK 3
+#define ASPEED_CLK_GATE_BCLK 4
+#define ASPEED_CLK_GATE_DCLK 5
+#define ASPEED_CLK_GATE_REFCLK 6
+#define ASPEED_CLK_GATE_USBPORT2CLK 7
+#define ASPEED_CLK_GATE_LCLK 8
+#define ASPEED_CLK_GATE_USBUHCICLK 9
+#define ASPEED_CLK_GATE_D1CLK 10
+#define ASPEED_CLK_GATE_YCLK 11
+#define ASPEED_CLK_GATE_USBPORT1CLK 12
+#define ASPEED_CLK_GATE_UART1CLK 13
+#define ASPEED_CLK_GATE_UART2CLK 14
+#define ASPEED_CLK_GATE_UART5CLK 15
+#define ASPEED_CLK_GATE_ESPICLK 16
+#define ASPEED_CLK_GATE_MAC1CLK 17
+#define ASPEED_CLK_GATE_MAC2CLK 18
+#define ASPEED_CLK_GATE_RSACLK 19
+#define ASPEED_CLK_GATE_UART3CLK 20
+#define ASPEED_CLK_GATE_UART4CLK 21
+#define ASPEED_CLK_GATE_SDCLKCLK 22
+#define ASPEED_CLK_GATE_LHCCLK 23
+#define ASPEED_CLK_HPLL 24
+#define ASPEED_CLK_AHB 25
+#define ASPEED_CLK_APB 26
+#define ASPEED_CLK_UART 27
+#define ASPEED_CLK_SDIO 28
+#define ASPEED_CLK_ECLK 29
+#define ASPEED_CLK_ECLK_MUX 30
+#define ASPEED_CLK_LHCLK 31
+#define ASPEED_CLK_MAC 32
+#define ASPEED_CLK_BCLK 33
+#define ASPEED_CLK_MPLL 34
+
+#define ASPEED_RESET_XDMA 0
+#define ASPEED_RESET_MCTP 1
+#define ASPEED_RESET_ADC 2
+#define ASPEED_RESET_JTAG_MASTER 3
+#define ASPEED_RESET_MIC 4
+#define ASPEED_RESET_PWM 5
+#define ASPEED_RESET_PCIVGA 6
+#define ASPEED_RESET_I2C 7
+#define ASPEED_RESET_AHB 8
+
+#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-15 05:01:38 +0000