diff options
| -rw-r--r-- | sound/pci/hda/patch_ca0132.c | 62 |
1 files changed, 38 insertions, 24 deletions
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 27d3388cd2a2..665142ef1186 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -3073,6 +3073,24 @@ static bool dspload_wait_loaded(struct hda_codec *codec) */ /* + * For cards with PCI-E region2 (Sound Blaster Z/ZxR, Recon3D, and AE-5) + * the mmio address 0x320 is used to set GPIO pins. The format for the data + * The first eight bits are just the number of the pin. So far, I've only seen + * this number go to 7. + */ +static void ca0132_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin, + bool enable) +{ + struct ca0132_spec *spec = codec->spec; + unsigned short gpio_data; + + gpio_data = gpio_pin & 0xF; + gpio_data |= ((enable << 8) & 0x100); + + writew(gpio_data, spec->mem_base + 0x320); +} + +/* * Sets up the GPIO pins so that they are discoverable. If this isn't done, * the card shows as having no GPIO pins. */ @@ -3947,9 +3965,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec) /*speaker out config*/ switch (spec->quirk) { case QUIRK_SBZ: - writew(0x0007, spec->mem_base + 0x320); - writew(0x0104, spec->mem_base + 0x320); - writew(0x0101, spec->mem_base + 0x320); + ca0132_mmio_gpio_set(codec, 7, false); + ca0132_mmio_gpio_set(codec, 4, true); + ca0132_mmio_gpio_set(codec, 1, true); chipio_set_control_param(codec, 0x0D, 0x18); break; case QUIRK_R3DI: @@ -3983,9 +4001,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec) /* Headphone out config*/ switch (spec->quirk) { case QUIRK_SBZ: - writew(0x0107, spec->mem_base + 0x320); - writew(0x0104, spec->mem_base + 0x320); - writew(0x0001, spec->mem_base + 0x320); + ca0132_mmio_gpio_set(codec, 7, true); + ca0132_mmio_gpio_set(codec, 4, true); + ca0132_mmio_gpio_set(codec, 1, false); chipio_set_control_param(codec, 0x0D, 0x12); break; case QUIRK_R3DI: @@ -4025,9 +4043,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec) /* Surround out config*/ switch (spec->quirk) { case QUIRK_SBZ: - writew(0x0007, spec->mem_base + 0x320); - writew(0x0104, spec->mem_base + 0x320); - writew(0x0101, spec->mem_base + 0x320); + ca0132_mmio_gpio_set(codec, 7, false); + ca0132_mmio_gpio_set(codec, 4, true); + ca0132_mmio_gpio_set(codec, 1, true); chipio_set_control_param(codec, 0x0D, 0x18); break; case QUIRK_R3DI: @@ -4291,7 +4309,7 @@ static int ca0132_alt_select_in(struct hda_codec *codec) case REAR_MIC: switch (spec->quirk) { case QUIRK_SBZ: - writew(0x0000, spec->mem_base + 0x320); + ca0132_mmio_gpio_set(codec, 0, false); tmp = FLOAT_THREE; break; case QUIRK_R3DI: @@ -4323,7 +4341,7 @@ static int ca0132_alt_select_in(struct hda_codec *codec) ca0132_mic_boost_set(codec, 0); switch (spec->quirk) { case QUIRK_SBZ: - writew(0x0000, spec->mem_base + 0x320); + ca0132_mmio_gpio_set(codec, 0, false); break; case QUIRK_R3DI: r3di_gpio_mic_set(codec, R3DI_REAR_MIC); @@ -4349,8 +4367,8 @@ static int ca0132_alt_select_in(struct hda_codec *codec) case FRONT_MIC: switch (spec->quirk) { case QUIRK_SBZ: - writew(0x0100, spec->mem_base + 0x320); - writew(0x0005, spec->mem_base + 0x320); + ca0132_mmio_gpio_set(codec, 0, true); + ca0132_mmio_gpio_set(codec, 5, false); tmp = FLOAT_THREE; break; case QUIRK_R3DI: @@ -6890,16 +6908,12 @@ static void sbz_region2_exit(struct hda_codec *codec) writeb(0x0, spec->mem_base + 0x100); for (i = 0; i < 8; i++) writeb(0xb3, spec->mem_base + 0x304); - /* - * I believe these are GPIO, with the right most hex digit being the - * gpio pin, and the second digit being on or off. We see this more in - * the input/output select functions. - */ - writew(0x0000, spec->mem_base + 0x320); - writew(0x0001, spec->mem_base + 0x320); - writew(0x0104, spec->mem_base + 0x320); - writew(0x0005, spec->mem_base + 0x320); - writew(0x0007, spec->mem_base + 0x320); + + ca0132_mmio_gpio_set(codec, 0, false); + ca0132_mmio_gpio_set(codec, 1, false); + ca0132_mmio_gpio_set(codec, 4, true); + ca0132_mmio_gpio_set(codec, 5, false); + ca0132_mmio_gpio_set(codec, 7, false); } static void sbz_set_pin_ctl_default(struct hda_codec *codec) @@ -7236,7 +7250,7 @@ static int ca0132_init(struct hda_codec *codec) ca0132_refresh_widget_caps(codec); if (spec->quirk == QUIRK_SBZ) - writew(0x0107, spec->mem_base + 0x320); + ca0132_mmio_gpio_set(codec, 7, true); switch (spec->quirk) { case QUIRK_R3DI: |