summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--sound/pci/hda/hda_intel.c38
1 files changed, 36 insertions, 2 deletions
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index c71dcacea807..96143df19b21 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -181,7 +181,7 @@ static const struct kernel_param_ops param_ops_xint = {
};
#define param_check_xint param_check_int
-static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+static int power_save = -1;
module_param(power_save, xint, 0644);
MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
"(in second, 0 = disable).");
@@ -2186,6 +2186,24 @@ out_free:
return err;
}
+#ifdef CONFIG_PM
+/* On some boards setting power_save to a non 0 value leads to clicking /
+ * popping sounds when ever we enter/leave powersaving mode. Ideally we would
+ * figure out how to avoid these sounds, but that is not always feasible.
+ * So we keep a list of devices where we disable powersaving as its known
+ * to causes problems on these devices.
+ */
+static struct snd_pci_quirk power_save_blacklist[] = {
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+ SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0),
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+ SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */
+ SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0),
+ {}
+};
+#endif /* CONFIG_PM */
+
/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
[AZX_DRIVER_NVIDIA] = 8,
@@ -2198,6 +2216,7 @@ static int azx_probe_continue(struct azx *chip)
struct hdac_bus *bus = azx_bus(chip);
struct pci_dev *pci = chip->pci;
int dev = chip->dev_index;
+ int val;
int err;
hda->probe_continued = 1;
@@ -2278,7 +2297,22 @@ static int azx_probe_continue(struct azx *chip)
chip->running = 1;
azx_add_card_list(chip);
- snd_hda_set_power_save(&chip->bus, power_save * 1000);
+
+ val = power_save;
+#ifdef CONFIG_PM
+ if (val == -1) {
+ const struct snd_pci_quirk *q;
+
+ val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+ q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist);
+ if (q && val) {
+ dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n",
+ q->subvendor, q->subdevice);
+ val = 0;
+ }
+ }
+#endif /* CONFIG_PM */
+ snd_hda_set_power_save(&chip->bus, val * 1000);
if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo)
pm_runtime_put_autosuspend(&pci->dev);