summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mtd/cadence-quadspi.txt7
-rw-r--r--Documentation/devicetree/bindings/mtd/denali-nand.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt1
-rw-r--r--Documentation/devicetree/bindings/mtd/mtk-quadspi.txt15
-rw-r--r--Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt4
-rw-r--r--arch/arm/mach-pxa/cm-x255.c19
-rw-r--r--arch/um/Kconfig.common1
-rw-r--r--drivers/mtd/Kconfig1
-rw-r--r--drivers/mtd/chips/map_ram.c34
-rw-r--r--drivers/mtd/chips/map_rom.c34
-rw-r--r--drivers/mtd/devices/docg3.c7
-rw-r--r--drivers/mtd/devices/lart.c2
-rw-r--r--drivers/mtd/devices/m25p80.c1
-rw-r--r--drivers/mtd/devices/mtdram.c36
-rw-r--r--drivers/mtd/devices/slram.c9
-rw-r--r--drivers/mtd/maps/cfi_flagadm.c2
-rw-r--r--drivers/mtd/maps/impa7.c2
-rw-r--r--drivers/mtd/maps/netsc520.c2
-rw-r--r--drivers/mtd/maps/nettel.c2
-rw-r--r--drivers/mtd/maps/plat-ram.c38
-rw-r--r--drivers/mtd/maps/sbc_gxx.c2
-rw-r--r--drivers/mtd/maps/ts5500_flash.c2
-rw-r--r--drivers/mtd/maps/uclinux.c2
-rw-r--r--drivers/mtd/mtdconcat.c27
-rw-r--r--drivers/mtd/mtdcore.c61
-rw-r--r--drivers/mtd/mtdpart.c14
-rw-r--r--drivers/mtd/mtdswap.c4
-rw-r--r--drivers/mtd/nand/Kconfig5
-rw-r--r--drivers/mtd/nand/Makefile2
-rw-r--r--drivers/mtd/nand/ams-delta.c2
-rw-r--r--drivers/mtd/nand/atmel/nand-controller.c7
-rw-r--r--drivers/mtd/nand/atmel/pmecc.c17
-rw-r--r--drivers/mtd/nand/atmel/pmecc.h1
-rw-r--r--drivers/mtd/nand/au1550nd.c3
-rw-r--r--drivers/mtd/nand/cmx270_nand.c2
-rw-r--r--drivers/mtd/nand/denali.c291
-rw-r--r--drivers/mtd/nand/denali.h44
-rw-r--r--drivers/mtd/nand/denali_dt.c4
-rw-r--r--drivers/mtd/nand/denali_pci.c5
-rw-r--r--drivers/mtd/nand/diskonchip.c3
-rw-r--r--drivers/mtd/nand/gpio.c112
-rw-r--r--drivers/mtd/nand/hisi504_nand.c3
-rw-r--r--drivers/mtd/nand/mtk_ecc.c13
-rw-r--r--drivers/mtd/nand/mxc_nand.c19
-rw-r--r--drivers/mtd/nand/nand_base.c34
-rw-r--r--drivers/mtd/nand/nandsim.c13
-rw-r--r--drivers/mtd/nand/nuc900_nand.c2
-rw-r--r--drivers/mtd/nand/omap2.c377
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c41
-rw-r--r--drivers/mtd/nand/qcom_nandc.c127
-rw-r--r--drivers/mtd/nand/sh_flctl.c9
-rw-r--r--drivers/mtd/parsers/Kconfig8
-rw-r--r--drivers/mtd/parsers/Makefile1
-rw-r--r--drivers/mtd/parsers/sharpslpart.c398
-rw-r--r--drivers/mtd/spi-nor/Kconfig6
-rw-r--r--drivers/mtd/spi-nor/cadence-quadspi.c55
-rw-r--r--drivers/mtd/spi-nor/intel-spi-pci.c3
-rw-r--r--drivers/mtd/spi-nor/intel-spi.c209
-rw-r--r--drivers/mtd/spi-nor/mtk-quadspi.c70
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c105
-rw-r--r--drivers/mtd/spi-nor/stm32-quadspi.c35
-rw-r--r--include/linux/mtd/mtd.h6
-rw-r--r--include/linux/mtd/nand-gpio.h5
-rw-r--r--include/linux/mtd/rawnand.h3
-rw-r--r--include/linux/mtd/spi-nor.h10
-rw-r--r--include/linux/platform_data/mtd-nand-omap2.h17
-rw-r--r--lib/Kconfig4
67 files changed, 1648 insertions, 754 deletions
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
index f248056da24c..bb2075df9b38 100644
--- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
@@ -1,7 +1,9 @@
* Cadence Quad SPI controller
Required properties:
-- compatible : Should be "cdns,qspi-nor".
+- compatible : should be one of the following:
+ Generic default - "cdns,qspi-nor".
+ For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
- reg : Contains two entries, each of which is a tuple consisting of a
physical address and length. The first entry is the address and
length of the controller register set. The second entry is the
@@ -14,6 +16,9 @@ Required properties:
Optional properties:
- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
+- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch
+ the read data rather than the QSPI clock. Make sure that QSPI return
+ clock is populated on the board before using this property.
Optional subnodes:
Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index 504291d2e5c2..0ee8edb60efc 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -29,7 +29,7 @@ nand: nand@ff900000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,socfpga-denali-nand";
- reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
+ reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0 144 4>;
};
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
index 4cab5d85cf6f..376fa2f50e6b 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
@@ -14,6 +14,7 @@ Required properties:
at25df641
at26df081a
en25s64
+ mr25h128
mr25h256
mr25h10
mr25h40
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index 840f9405dcf0..56d3668e2c50 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -1,13 +1,16 @@
* Serial NOR flash controller for MTK MT81xx (and similar)
Required properties:
-- compatible: The possible values are:
- "mediatek,mt2701-nor"
- "mediatek,mt7623-nor"
+- compatible: For mt8173, compatible should be "mediatek,mt8173-nor",
+ and it's the fallback compatible for other Soc.
+ For every other SoC, should contain both the SoC-specific compatible
+ string and "mediatek,mt8173-nor".
+ The possible values are:
+ "mediatek,mt2701-nor", "mediatek,mt8173-nor"
+ "mediatek,mt2712-nor", "mediatek,mt8173-nor"
+ "mediatek,mt7622-nor", "mediatek,mt8173-nor"
+ "mediatek,mt7623-nor", "mediatek,mt8173-nor"
"mediatek,mt8173-nor"
- For mt8173, compatible should be "mediatek,mt8173-nor".
- For every other SoC, should contain both the SoC-specific compatible string
- and "mediatek,mt8173-nor".
- reg: physical base address and length of the controller's register
- clocks: the phandle of the clocks needed by the nor controller
- clock-names: the names of the clocks
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index d9b655f11048..d4ee4da58463 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -5,9 +5,13 @@ Required properties:
- compatible: Should be set to one of the following:
marvell,pxa3xx-nand
marvell,armada370-nand
+ marvell,armada-8k-nand
- reg: The register base for the controller
- interrupts: The interrupt to map
- #address-cells: Set to <1> if the node includes partitions
+ - marvell,system-controller: Set to retrieve the syscon node that handles
+ NAND controller related registers (only required
+ with marvell,armada-8k-nand compatible).
Optional properties:
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index b592f79a1742..fa8e7dd4d898 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -14,7 +14,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand-gpio.h>
-
+#include <linux/gpio/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
@@ -176,6 +176,17 @@ static inline void cmx255_init_nor(void) {}
#endif
#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+
+static struct gpiod_lookup_table cmx255_nand_gpiod_table = {
+ .dev_id = "gpio-nand",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH),
+ },
+};
+
static struct resource cmx255_nand_resource[] = {
[0] = {
.start = PXA_CS1_PHYS,
@@ -198,11 +209,6 @@ static struct mtd_partition cmx255_nand_parts[] = {
};
static struct gpio_nand_platdata cmx255_nand_platdata = {
- .gpio_nce = GPIO_NAND_CS,
- .gpio_cle = GPIO_NAND_CLE,
- .gpio_ale = GPIO_NAND_ALE,
- .gpio_rdy = GPIO_NAND_RB,
- .gpio_nwp = -1,
.parts = cmx255_nand_parts,
.num_parts = ARRAY_SIZE(cmx255_nand_parts),
.chip_delay = 25,
@@ -220,6 +226,7 @@ static struct platform_device cmx255_nand = {
static void __init cmx255_init_nand(void)
{
+ gpiod_add_lookup_table(&cmx255_nand_gpiod_table);
platform_device_register(&cmx255_nand);
}
#else
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index d9280482a2f8..c68add8df3ae 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -10,7 +10,6 @@ config UML
select HAVE_DEBUG_KMEMLEAK
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
- select GENERIC_IO
select GENERIC_CLOCKEVENTS
select HAVE_GCC_PLUGINS
select TTY # Needed for line.c
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 5a2d71729b9a..2a8ac6829d42 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,6 +1,5 @@
menuconfig MTD
tristate "Memory Technology Device (MTD) support"
- depends on GENERIC_IO
help
Memory Technology Devices are flash, RAM and similar chips, often
used for solid state file systems on embedded devices. This option
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index afb43d5e1782..1cd0fff0e940 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -20,8 +20,9 @@ static int mapram_write (struct mtd_info *, loff_t, size_t, size_t *, const u_ch
static int mapram_erase (struct mtd_info *, struct erase_info *);
static void mapram_nop (struct mtd_info *);
static struct mtd_info *map_ram_probe(struct map_info *map);
-static unsigned long mapram_unmapped_area(struct mtd_info *, unsigned long,
- unsigned long, unsigned long);
+static int mapram_point (struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys);
+static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
static struct mtd_chip_driver mapram_chipdrv = {
@@ -65,11 +66,12 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
mtd->type = MTD_RAM;
mtd->size = map->size;
mtd->_erase = mapram_erase;
- mtd->_get_unmapped_area = mapram_unmapped_area;
mtd->_read = mapram_read;
mtd->_write = mapram_write;
mtd->_panic_write = mapram_write;
+ mtd->_point = mapram_point;
mtd->_sync = mapram_nop;
+ mtd->_unpoint = mapram_unpoint;
mtd->flags = MTD_CAP_RAM;
mtd->writesize = 1;
@@ -81,19 +83,23 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
return mtd;
}
-
-/*
- * Allow NOMMU mmap() to directly map the device (if not NULL)
- * - return the address to which the offset maps
- * - return -ENOSYS to indicate refusal to do the mapping
- */
-static unsigned long mapram_unmapped_area(struct mtd_info *mtd,
- unsigned long len,
- unsigned long offset,
- unsigned long flags)
+static int mapram_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct map_info *map = mtd->priv;
- return (unsigned long) map->virt + offset;
+
+ if (!map->virt)
+ return -EINVAL;
+ *virt = map->virt + from;
+ if (phys)
+ *phys = map->phys + from;
+ *retlen = len;
+ return 0;
+}
+
+static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ return 0;
}
static int mapram_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index e67f73ab44c9..20e3604b4d71 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -20,8 +20,10 @@ static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_ch
static void maprom_nop (struct mtd_info *);
static struct mtd_info *map_rom_probe(struct map_info *map);
static int maprom_erase (struct mtd_info *mtd, struct erase_info *info);
-static unsigned long maprom_unmapped_area(struct mtd_info *, unsigned long,
- unsigned long, unsigned long);
+static int maprom_point (struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys);
+static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
+
static struct mtd_chip_driver maprom_chipdrv = {
.probe = map_rom_probe,
@@ -51,7 +53,8 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
mtd->name = map->name;
mtd->type = MTD_ROM;
mtd->size = map->size;
- mtd->_get_unmapped_area = maprom_unmapped_area;
+ mtd->_point = maprom_point;
+ mtd->_unpoint = maprom_unpoint;
mtd->_read = maprom_read;
mtd->_write = maprom_write;
mtd->_sync = maprom_nop;
@@ -66,18 +69,23 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
}
-/*
- * Allow NOMMU mmap() to directly map the device (if not NULL)
- * - return the address to which the offset maps
- * - return -ENOSYS to indicate refusal to do the mapping
- */
-static unsigned long maprom_unmapped_area(struct mtd_info *mtd,
- unsigned long len,
- unsigned long offset,
- unsigned long flags)
+static int maprom_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct map_info *map = mtd->priv;
- return (unsigned long) map->virt + offset;
+
+ if (!map->virt)
+ return -EINVAL;
+ *virt = map->virt + from;
+ if (phys)
+ *phys = map->phys + from;
+ *retlen = len;
+ return 0;
+}
+
+static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ return 0;
}
static int maprom_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 84b16133554b..0806f72102c0 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1814,8 +1814,13 @@ static void __init doc_dbg_register(struct mtd_info *floor)
struct dentry *root = floor->dbg.dfs_dir;
struct docg3 *docg3 = floor->priv;
- if (IS_ERR_OR_NULL(root))
+ if (IS_ERR_OR_NULL(root)) {
+ if (IS_ENABLED(CONFIG_DEBUG_FS) &&
+ !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER))
+ dev_warn(floor->dev.parent,
+ "CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n");
return;
+ }
debugfs_create_file("docg3_flashcontrol", S_IRUSR, root, docg3,
&flashcontrol_fops);
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 268aae45b514..555b94406e0b 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -583,7 +583,7 @@ static struct mtd_erase_region_info erase_regions[] = {
}
};
-static struct mtd_partition lart_partitions[] = {
+static const struct mtd_partition lart_partitions[] = {
/* blob */
{
.name = "blob",
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 00eea6fd379c..dbe6a1de2bb8 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -359,6 +359,7 @@ static const struct spi_device_id m25p_ids[] = {
{"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
/* Everspin MRAMs (non-JEDEC) */
+ { "mr25h128" }, /* 128 Kib, 40 MHz */
{ "mr25h256" }, /* 256 Kib, 40 MHz */
{ "mr25h10" }, /* 1 Mib, 40 MHz */
{ "mr25h40" }, /* 4 Mib, 40 MHz */
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index cbd8547d7aad..0bf4aeaf0cb8 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/vmalloc.h>
+#include <linux/mm.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/mtdram.h>
@@ -69,6 +70,27 @@ static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
{
*virt = mtd->priv + from;
*retlen = len;
+
+ if (phys) {
+ /* limit retlen to the number of contiguous physical pages */
+ unsigned long page_ofs = offset_in_page(*virt);
+ void *addr = *virt - page_ofs;
+ unsigned long pfn1, pfn0 = vmalloc_to_pfn(addr);
+
+ *phys = __pfn_to_phys(pfn0) + page_ofs;
+ len += page_ofs;
+ while (len > PAGE_SIZE) {
+ len -= PAGE_SIZE;
+ addr += PAGE_SIZE;
+ pfn0++;
+ pfn1 = vmalloc_to_pfn(addr);
+ if (pfn1 != pfn0) {
+ *retlen = addr - *virt;
+ break;
+ }
+ }
+ }
+
return 0;
}
@@ -77,19 +99,6 @@ static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
return 0;
}
-/*
- * Allow NOMMU mmap() to directly map the device (if not NULL)
- * - return the address to which the offset maps
- * - return -ENOSYS to indicate refusal to do the mapping
- */
-static unsigned long ram_get_unmapped_area(struct mtd_info *mtd,
- unsigned long len,
- unsigned long offset,
- unsigned long flags)
-{
- return (unsigned long) mtd->priv + offset;
-}
-
static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
@@ -134,7 +143,6 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
mtd->_erase = ram_erase;
mtd->_point = ram_point;
mtd->_unpoint = ram_unpoint;
- mtd->_get_unmapped_area = ram_get_unmapped_area;
mtd->_read = ram_read;
mtd->_write = ram_write;
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 8087c36dc693..0ec85f316d24 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -163,8 +163,9 @@ static int register_device(char *name, unsigned long start, unsigned long length
}
if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start =
- ioremap(start, length))) {
- E("slram: ioremap failed\n");
+ memremap(start, length,
+ MEMREMAP_WB | MEMREMAP_WT | MEMREMAP_WC))) {
+ E("slram: memremap failed\n");
return -EIO;
}
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end =
@@ -186,7 +187,7 @@ static int register_device(char *name, unsigned long start, unsigned long length
if (mtd_device_register((*curmtd)->mtdinfo, NULL, 0)) {
E("slram: Failed to register new device\n");
- iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
+ memunmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
kfree((*curmtd)->mtdinfo->priv);
kfree((*curmtd)->mtdinfo);
return(-EAGAIN);
@@ -206,7 +207,7 @@ static void unregister_devices(void)
while (slram_mtdlist) {
nextitem = slram_mtdlist->next;
mtd_device_unregister(slram_mtdlist->mtdinfo);
- iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
+ memunmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
kfree(slram_mtdlist->mtdinfo->priv);
kfree(slram_mtdlist->mtdinfo);
kfree(slram_mtdlist);
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index d504b3d1791d..70f488628464 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -61,7 +61,7 @@ static struct map_info flagadm_map = {
.bankwidth = 2,
};
-static struct mtd_partition flagadm_parts[] = {
+static const struct mtd_partition flagadm_parts[] = {
{
.name = "Bootloader",
.offset = FLASH_PARTITION0_ADDR,
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index 15bbda03be65..a0b8fa7849a9 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -47,7 +47,7 @@ static struct map_info impa7_map[NUM_FLASHBANKS] = {
/*
* MTD partitioning stuff
*/
-static struct mtd_partition partitions[] =
+static const struct mtd_partition partitions[] =
{
{
.name = "FileSystem",
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 81dc2598bc0a..3528497f96c7 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -52,7 +52,7 @@
/* partition_info gives details on the logical partitions that the split the
* single flash device into. If the size if zero we use up to the end of the
* device. */
-static struct mtd_partition partition_info[]={
+static const struct mtd_partition partition_info[] = {
{
.name = "NetSc520 boot kernel",
.offset = 0,
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index a577ef8553d0..729579fb654f 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -107,7 +107,7 @@ static struct map_info nettel_amd_map = {
.bankwidth = AMD_BUSWIDTH,
};
-static struct mtd_partition nettel_amd_partitions[] = {
+static const struct mtd_partition nettel_amd_partitions[] = {
{
.name = "SnapGear BIOS config",
.offset = 0x000e0000,
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 51572895c02c..6d9a4d6f9839 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -43,7 +43,6 @@ struct platram_info {
struct device *dev;
struct mtd_info *mtd;
struct map_info map;
- struct resource *area;
struct platdata_mtd_ram *pdata;
};
@@ -97,16 +96,6 @@ static int platram_remove(struct platform_device *pdev)
platram_setrw(info, PLATRAM_RO);
- /* release resources */
-
- if (info->area) {
- release_resource(info->area);
- kfree(info->area);
- }
-
- if (info->map.virt != NULL)
- iounmap(info->map.virt);
-
kfree(info);
return 0;
@@ -147,12 +136,11 @@ static int platram_probe(struct platform_device *pdev)
info->pdata = pdata;
/* get the resource for the memory mapping */
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- if (res == NULL) {
- dev_err(&pdev->dev, "no memory resource specified\n");
- err = -ENOENT;
+ info->map.virt = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(info->map.virt)) {
+ err = PTR_ERR(info->map.virt);
+ dev_err(&pdev->dev, "failed to ioremap() region\n");
goto exit_free;
}
@@ -167,26 +155,8 @@ static int platram_probe(struct platform_device *pdev)
(char *)pdata->mapname : (char *)pdev->name;
info->map.bankwidth = pdata->bankwidth;
- /* register our usage of the memory area */
-
- info->area = request_mem_region(res->start, info->map.size, pdev->name);
- if (info->area == NULL) {
- dev_err(&pdev->dev, "failed to request memory region\n");
- err = -EIO;
- goto exit_free;
- }
-
- /* remap the memory area */
-
- info->map.virt = ioremap(res->start, info->map.size);
dev_dbg(&pdev->dev, "virt %p, %lu bytes\n", info->map.virt, info->map.size);
- if (info->map.virt == NULL) {
- dev_err(&pdev->dev, "failed to ioremap() region\n");
- err = -EIO;
- goto exit_free;
- }
-
simple_map_init(&info->map);
dev_dbg(&pdev->dev, "initialised map, probing for mtd\n");
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 556a2dfe94c5..4337d279ad83 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -87,7 +87,7 @@ static DEFINE_SPINLOCK(sbc_gxx_spin);
/* partition_info gives details on the logical partitions that the split the
* single flash device into. If the size if zero we use up to the end of the
* device. */
-static struct mtd_partition partition_info[]={
+static const struct mtd_partition partition_info[] = {
{ .name = "SBC-GXx flash boot partition",
.offset = 0,
.size = BOOT_PARTITION_SIZE_KiB*1024 },
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index 9969fedb1f13..8f177e0acb8c 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -43,7 +43,7 @@ static struct map_info ts5500_map = {
.phys = WINDOW_ADDR
};
-static struct mtd_partition ts5500_partitions[] = {
+static const struct mtd_partition ts5500_partitions[] = {
{
.name = "Drive A",
.offset = 0,
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 00a8190797ec..aef030ca8601 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -49,7 +49,7 @@ static struct mtd_info *uclinux_ram_mtdinfo;
/****************************************************************************/
-static struct mtd_partition uclinux_romfs[] = {
+static const struct mtd_partition uclinux_romfs[] = {
{ .name = "ROMfs" }
};
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index d573606b91c2..60bf53df5454 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -644,32 +644,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
}
/*
- * try to support NOMMU mmaps on concatenated devices
- * - we don't support subdev spanning as we can't guarantee it'll work
- */
-static unsigned long concat_get_unmapped_area(struct mtd_info *mtd,
- unsigned long len,
- unsigned long offset,
- unsigned long flags)
-{
- struct mtd_concat *concat = CONCAT(mtd);
- int i;
-
- for (i = 0; i < concat->num_subdev; i++) {
- struct mtd_info *subdev = concat->subdev[i];
-
- if (offset >= subdev->size) {
- offset -= subdev->size;
- continue;
- }
-
- return mtd_get_unmapped_area(subdev, len, offset, flags);
- }
-
- return (unsigned long) -ENOSYS;
-}
-
-/*
* This function constructs a virtual MTD device by concatenating
* num_devs MTD devices. A pointer to the new device object is
* stored to *new_dev upon success. This function does _not_
@@ -790,7 +764,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
concat->mtd._unlock = concat_unlock;
concat->mtd._suspend = concat_suspend;
concat->mtd._resume = concat_resume;
- concat->mtd._get_unmapped_area = concat_get_unmapped_area;
/*
* Combine the erase block size info of the subdevices:
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index e7ea842ba3db..f80e911b8843 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1022,11 +1022,18 @@ EXPORT_SYMBOL_GPL(mtd_unpoint);
unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
unsigned long offset, unsigned long flags)
{
- if (!mtd->_get_unmapped_area)
- return -EOPNOTSUPP;
- if (offset >= mtd->size || len > mtd->size - offset)
- return -EINVAL;
- return mtd->_get_unmapped_area(mtd, len, offset, flags);
+ size_t retlen;
+ void *virt;
+ int ret;
+
+ ret = mtd_point(mtd, offset, len, &retlen, &virt, NULL);
+ if (ret)
+ return ret;
+ if (retlen != len) {
+ mtd_unpoint(mtd, offset, retlen);
+ return -ENOSYS;
+ }
+ return (unsigned long)virt;
}
EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
@@ -1093,6 +1100,39 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
}
EXPORT_SYMBOL_GPL(mtd_panic_write);
+static int mtd_check_oob_ops(struct mtd_info *mtd, loff_t offs,
+ struct mtd_oob_ops *ops)
+{
+ /*
+ * Some users are setting ->datbuf or ->oobbuf to NULL, but are leaving
+ * ->len or ->ooblen uninitialized. Force ->len and ->ooblen to 0 in
+ * this case.
+ */
+ if (!ops->datbuf)
+ ops->len = 0;
+
+ if (!ops->oobbuf)
+ ops->ooblen = 0;
+
+ if (offs < 0 || offs + ops->len >= mtd->size)
+ return -EINVAL;
+
+ if (ops->ooblen) {
+ u64 maxooblen;
+
+ if (ops->ooboffs >= mtd_oobavail(mtd, ops))
+ return -EINVAL;
+
+ maxooblen = ((mtd_div_by_ws(mtd->size, mtd) -
+ mtd_div_by_ws(offs, mtd)) *
+ mtd_oobavail(mtd, ops)) - ops->ooboffs;
+ if (ops->ooblen > maxooblen)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
{
int ret_code;
@@ -1100,6 +1140,10 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
if (!mtd->_read_oob)
return -EOPNOTSUPP;
+ ret_code = mtd_check_oob_ops(mtd, from, ops);
+ if (ret_code)
+ return ret_code;
+
ledtrig_mtd_activity();
/*
* In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics
@@ -1119,11 +1163,18 @@ EXPORT_SYMBOL_GPL(mtd_read_oob);
int mtd_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
+ int ret;
+
ops->retlen = ops->oobretlen = 0;
if (!mtd->_write_oob)
return -EOPNOTSUPP;
if (!(mtd->flags & MTD_WRITEABLE))
return -EROFS;
+
+ ret = mtd_check_oob_ops(mtd, to, ops);
+ if (ret)
+ return ret;
+
ledtrig_mtd_activity();
return mtd->_write_oob(mtd, to, ops);
}
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index a308e707392d..be088bccd593 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -101,18 +101,6 @@ static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
return part->parent->_unpoint(part->parent, from + part->offset, len);
}
-static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
- unsigned long len,
- unsigned long offset,
- unsigned long flags)
-{
- struct mtd_part *part = mtd_to_part(mtd);
-
- offset += part->offset;
- return part->parent->_get_unmapped_area(part->parent, len, offset,
- flags);
-}
-
static int part_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
@@ -458,8 +446,6 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
slave->mtd._unpoint = part_unpoint;
}
- if (parent->_get_unmapped_area)
- slave->mtd._get_unmapped_area = part_get_unmapped_area;
if (parent->_read_oob)
slave->mtd._read_oob = part_read_oob;
if (parent->_write_oob)
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
index 7d9080e33865..f07492c6f4b2 100644
--- a/drivers/mtd/mtdswap.c
+++ b/drivers/mtd/mtdswap.c
@@ -50,7 +50,7 @@
* Number of free eraseblocks below which GC can also collect low frag
* blocks.
*/
-#define LOW_FRAG_GC_TRESHOLD 5
+#define LOW_FRAG_GC_THRESHOLD 5
/*
* Wear level cost amortization. We want to do wear leveling on the background
@@ -805,7 +805,7 @@ static int __mtdswap_choose_gc_tree(struct mtdswap_dev *d)
{
int idx, stopat;
- if (TREE_COUNT(d, CLEAN) < LOW_FRAG_GC_TRESHOLD)
+ if (TREE_COUNT(d, CLEAN) < LOW_FRAG_GC_THRESHOLD)
stopat = MTDSWAP_LOWFRAG;
else
stopat = MTDSWAP_HIFRAG;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3f2036f31da4..bb48aafed9a2 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -317,8 +317,11 @@ config MTD_NAND_PXA3xx
tristate "NAND support on PXA3xx and Armada 370/XP"
depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU
help
+
This enables the driver for the NAND flash device found on
- PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
+ PXA3xx processors (NFCv1) and also on 32-bit Armada
+ platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada
+ platforms (7K, 8K) (NFCv2).
config MTD_NAND_SLC_LPC32XX
tristate "NXP LPC32xx SLC Controller"
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 6e2db700d923..118a1349aad3 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
-obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o
+obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_amd.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index dcec9cf4983f..d60ada45c549 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -41,7 +41,7 @@ static struct mtd_info *ams_delta_mtd = NULL;
* Define partitions for flash devices
*/
-static struct mtd_partition partition_info[] = {
+static const struct mtd_partition partition_info[] = {
{ .name = "Kernel",
.offset = 0,
.size = 3 * SZ_1M + SZ_512K },
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index f25eca79f4e5..90a71a56bc23 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -718,8 +718,7 @@ static void atmel_nfc_set_op_addr(struct nand_chip *chip, int page, int column)
nc->op.addrs[nc->op.naddrs++] = page;
nc->op.addrs[nc->op.naddrs++] = page >> 8;
- if ((mtd->writesize > 512 && chip->chipsize > SZ_128M) ||
- (mtd->writesize <= 512 && chip->chipsize > SZ_32M))
+ if (chip->options & NAND_ROW_ADDR_3)
nc->op.addrs[nc->op.naddrs++] = page >> 16;
}
}
@@ -2530,6 +2529,9 @@ static __maybe_unused int atmel_nand_controller_resume(struct device *dev)
struct atmel_nand_controller *nc = dev_get_drvdata(dev);
struct atmel_nand *nand;
+ if (nc->pmecc)
+ atmel_pmecc_reset(nc->pmecc);
+
list_for_each_entry(nand, &nc->chips, node) {
int i;
@@ -2547,6 +2549,7 @@ static struct platform_driver atmel_nand_controller_driver = {
.driver = {
.name = "atmel-nand-controller",
.of_match_table = of_match_ptr(atmel_nand_controller_of_ids),
+ .pm = &atmel_nand_controller_pm_ops,
},
.probe = atmel_nand_controller_probe,
.remove = atmel_nand_controller_remove,
diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c
index 8268636675ef..fcbe4fd6e684 100644
--- a/drivers/mtd/nand/atmel/pmecc.c
+++ b/drivers/mtd/nand/atmel/pmecc.c
@@ -765,6 +765,13 @@ void atmel_pmecc_get_generated_eccbytes(struct atmel_pmecc_user *user,
}
EXPORT_SYMBOL_GPL(atmel_pmecc_get_generated_eccbytes);
+void atmel_pmecc_reset(struct atmel_pmecc *pmecc)
+{
+ writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL);
+ writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL);
+}
+EXPORT_SYMBOL_GPL(atmel_pmecc_reset);
+
int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op)
{
struct atmel_pmecc *pmecc = user->pmecc;
@@ -797,10 +804,7 @@ EXPORT_SYMBOL_GPL(atmel_pmecc_enable);
void atmel_pmecc_disable(struct atmel_pmecc_user *user)
{
- struct atmel_pmecc *pmecc = user->pmecc;
-
- writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL);
- writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL);
+ atmel_pmecc_reset(user->pmecc);
mutex_unlock(&user->pmecc->lock);
}
EXPORT_SYMBOL_GPL(atmel_pmecc_disable);
@@ -855,10 +859,7 @@ static struct atmel_pmecc *atmel_pmecc_create(struct platform_device *pdev,
/* Disable all interrupts before registering the PMECC handler. */
writel(0xffffffff, pmecc->regs.base + ATMEL_PMECC_IDR);
-
- /* Reset the ECC engine */
- writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL);
- writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL);
+ atmel_pmecc_reset(pmecc);
return pmecc;
}
diff --git a/drivers/mtd/nand/atmel/pmecc.h b/drivers/mtd/nand/atmel/pmecc.h
index a8ddbfca2ea5..817e0dd9fd15 100644
--- a/drivers/mtd/nand/atmel/pmecc.h
+++ b/drivers/mtd/nand/atmel/pmecc.h
@@ -61,6 +61,7 @@ atmel_pmecc_create_user(struct atmel_pmecc *pmecc,
struct atmel_pmecc_user_req *req);
void atmel_pmecc_destroy_user(struct atmel_pmecc_user *user);
+void atmel_pmecc_reset(struct atmel_pmecc *pmecc);
int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op);
void atmel_pmecc_disable(struct atmel_pmecc_user *user);
int atmel_pmecc_wait_rdy(struct atmel_pmecc_user *user);
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 9d4a28fa6b73..8ab827edf94e 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -331,8 +331,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
ctx->write_byte(mtd, (u8)(page_addr >> 8));
- /* One more address cycle for devices > 32MiB */
- if (this->chipsize > (32 << 20))
+ if (this->options & NAND_ROW_ADDR_3)
ctx->write_byte(mtd,
((page_addr >> 16) & 0x0f));
}
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 1fc435f994e1..b01c9804590e 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -42,7 +42,7 @@ static void __iomem *cmx270_nand_io;
/*
* Define static partitions for flash device
*/
-static struct mtd_partition partition_info[] = {
+static const struct mtd_partition partition_info[] = {
[0] = {
.name = "cmx270-0",
.offset = 0,
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 3087b0ba7b7f..5124f8ae8c04 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -10,20 +10,18 @@
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
*/
-#include <linux/interrupt.h>
-#include <linux/delay.h>
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
#include <linux/dma-mapping.h>
-#include <linux/wait.h>
-#include <linux/mutex.h>
-#include <linux/mtd/mtd.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
#include "denali.h"
@@ -31,9 +29,9 @@ MODULE_LICENSE("GPL");
#define DENALI_NAND_NAME "denali-nand"
-/* Host Data/Command Interface */
-#define DENALI_HOST_ADDR 0x00
-#define DENALI_HOST_DATA 0x10
+/* for Indexed Addressing */
+#define DENALI_INDEXED_CTRL 0x00
+#define DENALI_INDEXED_DATA 0x10
#define DENALI_MAP00 (0 << 26) /* direct access to buffer */
#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */
@@ -61,31 +59,55 @@ MODULE_LICENSE("GPL");
*/
#define DENALI_CLK_X_MULT 6
-/*
- * this macro allows us to convert from an MTD structure to our own
- * device context (denali) structure.
- */
static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand);
}
-static void denali_host_write(struct denali_nand_info *denali,
- uint32_t addr, uint32_t data)
+/*
+ * Direct Addressing - the slave address forms the control information (command
+ * type, bank, block, and page address). The slave data is the actual data to
+ * be transferred. This mode requires 28 bits of address region allocated.
+ */
+static u32 denali_direct_read(struct denali_nand_info *denali, u32 addr)
+{
+ return ioread32(denali->host + addr);
+}
+
+static void denali_direct_write(struct denali_nand_info *denali, u32 addr,
+ u32 data)
{
- iowrite32(addr, denali->host + DENALI_HOST_ADDR);
- iowrite32(data, denali->host + DENALI_HOST_DATA);
+ iowrite32(data, denali->host + addr);
+}
+
+/*
+ * Indexed Addressing - address translation module intervenes in passing the
+ * control information. This mode reduces the required address range. The
+ * control information and transferred data are latched by the registers in
+ * the translation module.
+ */
+static u32 denali_indexed_read(struct denali_nand_info *denali, u32 addr)
+{
+ iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
+ return ioread32(denali->host + DENALI_INDEXED_DATA);
+}
+
+static void denali_indexed_write(struct denali_nand_info *denali, u32 addr,
+ u32 data)
+{
+ iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
+ iowrite32(data, denali->host + DENALI_INDEXED_DATA);
}
/*
* Use the configuration feature register to determine the maximum number of
* banks that the hardware supports.
*/
-static void detect_max_banks(struct denali_nand_info *denali)
+static void denali_detect_max_banks(struct denali_nand_info *denali)
{
uint32_t features = ioread32(denali->reg + FEATURES);
- denali->max_banks = 1 << (features & FEATURES__N_BANKS);
+ denali->max_banks = 1 << FIELD_GET(FEATURES__N_BANKS, features);
/* the encoding changed from rev 5.0 to 5.1 */
if (denali->revision < 0x0501)
@@ -189,7 +211,7 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
msecs_to_jiffies(1000));
if (!time_left) {
dev_err(denali->dev, "timeout while waiting for irq 0x%x\n",
- denali->irq_mask);
+ irq_mask);
return 0;
}
@@ -208,73 +230,47 @@ static uint32_t denali_check_irq(struct denali_nand_info *denali)
return irq_status;
}
-/*
- * This helper function setups the registers for ECC and whether or not
- * the spare area will be transferred.
- */
-static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
- bool transfer_spare)
-{
- int ecc_en_flag, transfer_spare_flag;
-
- /* set ECC, transfer spare bits if needed */
- ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
- transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
-
- /* Enable spare area/ECC per user's request. */
- iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE);
- iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG);
-}
-
static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
int i;
- iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
- denali->host + DENALI_HOST_ADDR);
-
for (i = 0; i < len; i++)
- buf[i] = ioread32(denali->host + DENALI_HOST_DATA);
+ buf[i] = denali->host_read(denali, addr);
}
static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
int i;
- iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
- denali->host + DENALI_HOST_ADDR);
-
for (i = 0; i < len; i++)
- iowrite32(buf[i], denali->host + DENALI_HOST_DATA);
+ denali->host_write(denali, addr, buf[i]);
}
static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
uint16_t *buf16 = (uint16_t *)buf;
int i;
- iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
- denali->host + DENALI_HOST_ADDR);
-
for (i = 0; i < len / 2; i++)
- buf16[i] = ioread32(denali->host + DENALI_HOST_DATA);
+ buf16[i] = denali->host_read(denali, addr);
}
static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf,
int len)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
const uint16_t *buf16 = (const uint16_t *)buf;
int i;
- iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
- denali->host + DENALI_HOST_ADDR);
-
for (i = 0; i < len / 2; i++)
- iowrite32(buf16[i], denali->host + DENALI_HOST_DATA);
+ denali->host_write(denali, addr, buf16[i]);
}
static uint8_t denali_read_byte(struct mtd_info *mtd)
@@ -319,7 +315,7 @@ static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
if (ctrl & NAND_CTRL_CHANGE)
denali_reset_irq(denali);
- denali_host_write(denali, DENALI_BANK(denali) | type, dat);
+ denali->host_write(denali, DENALI_BANK(denali) | type, dat);
}
static int denali_dev_ready(struct mtd_info *mtd)
@@ -389,7 +385,7 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
return 0;
}
- max_bitflips = ecc_cor & ECC_COR_INFO__MAX_ERRORS;
+ max_bitflips = FIELD_GET(ECC_COR_INFO__MAX_ERRORS, ecc_cor);
/*
* The register holds the maximum of per-sector corrected bitflips.
@@ -402,13 +398,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
return max_bitflips;
}
-#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
-#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
-#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
-#define ECC_ERROR_UNCORRECTABLE(x) ((x) & ERR_CORRECTION_INFO__ERROR_TYPE)
-#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
-#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
-
static int denali_sw_ecc_fixup(struct mtd_info *mtd,
struct denali_nand_info *denali,
unsigned long *uncor_ecc_flags, uint8_t *buf)
@@ -426,18 +415,20 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
do {
err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS);
- err_sector = ECC_SECTOR(err_addr);
- err_byte = ECC_BYTE(err_addr);
+ err_sector = FIELD_GET(ECC_ERROR_ADDRESS__SECTOR, err_addr);
+ err_byte = FIELD_GET(ECC_ERROR_ADDRESS__OFFSET, err_addr);
err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO);
- err_cor_value = ECC_CORRECTION_VALUE(err_cor_info);
- err_device = ECC_ERR_DEVICE(err_cor_info);
+ err_cor_value = FIELD_GET(ERR_CORRECTION_INFO__BYTE,
+ err_cor_info);
+ err_device = FIELD_GET(ERR_CORRECTION_INFO__DEVICE,
+ err_cor_info);
/* reset the bitflip counter when crossing ECC sector */
if (err_sector != prev_sector)
bitflips = 0;
- if (ECC_ERROR_UNCORRECTABLE(err_cor_info)) {
+ if (err_cor_info & ERR_CORRECTION_INFO__UNCOR) {
/*
* Check later if this is a real ECC error, or
* an erased sector.
@@ -467,12 +458,11 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
}
prev_sector = err_sector;
- } while (!ECC_LAST_ERR(err_cor_info));
+ } while (!(err_cor_info & ERR_CORRECTION_INFO__LAST_ERR));
/*
- * Once handle all ecc errors, controller will trigger a
- * ECC_TRANSACTION_DONE interrupt, so here just wait for
- * a while for this interrupt
+ * Once handle all ECC errors, controller will trigger an
+ * ECC_TRANSACTION_DONE interrupt.
*/
irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE);
if (!(irq_status & INTR__ECC_TRANSACTION_DONE))
@@ -481,13 +471,6 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
return max_bitflips;
}
-/* programs the controller to either enable/disable DMA transfers */
-static void denali_enable_dma(struct denali_nand_info *denali, bool en)
-{
- iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE);
- ioread32(denali->reg + DMA_ENABLE);
-}
-
static void denali_setup_dma64(struct denali_nand_info *denali,
dma_addr_t dma_addr, int page, int write)
{
@@ -502,14 +485,14 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
* 1. setup transfer type, interrupt when complete,
* burst len = 64 bytes, the number of pages
*/
- denali_host_write(denali, mode,
- 0x01002000 | (64 << 16) | (write << 8) | page_count);
+ denali->host_write(denali, mode,
+ 0x01002000 | (64 << 16) | (write << 8) | page_count);
/* 2. set memory low address */
- denali_host_write(denali, mode, dma_addr);
+ denali->host_write(denali, mode, lower_32_bits(dma_addr));
/* 3. set memory high address */
- denali_host_write(denali, mode, (uint64_t)dma_addr >> 32);
+ denali->host_write(denali, mode, upper_32_bits(dma_addr));
}
static void denali_setup_dma32(struct denali_nand_info *denali,
@@ -523,32 +506,23 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
/* DMA is a four step process */
/* 1. setup transfer type and # of pages */
- denali_host_write(denali, mode | page,
- 0x2000 | (write << 8) | page_count);
+ denali->host_write(denali, mode | page,
+ 0x2000 | (write << 8) | page_count);
/* 2. set memory high address bits 23:8 */
- denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
+ denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
/* 3. set memory low address bits 23:8 */
- denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300);
+ denali->host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300);
/* 4. interrupt when complete, burst len = 64 bytes */
- denali_host_write(denali, mode | 0x14000, 0x2400);
-}
-
-static void denali_setup_dma(struct denali_nand_info *denali,
- dma_addr_t dma_addr, int page, int write)
-{
- if (denali->caps & DENALI_CAP_DMA_64BIT)
- denali_setup_dma64(denali, dma_addr, page, write);
- else
- denali_setup_dma32(denali, dma_addr, page, write);
+ denali->host_write(denali, mode | 0x14000, 0x2400);
}
static int denali_pio_read(struct denali_nand_info *denali, void *buf,
size_t size, int page, int raw)
{
- uint32_t addr = DENALI_BANK(denali) | page;
+ u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
uint32_t *buf32 = (uint32_t *)buf;
uint32_t irq_status, ecc_err_mask;
int i;
@@ -560,9 +534,8 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
denali_reset_irq(denali);
- iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
for (i = 0; i < size / 4; i++)
- *buf32++ = ioread32(denali->host + DENALI_HOST_DATA);
+ *buf32++ = denali->host_read(denali, addr);
irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
if (!(irq_status & INTR__PAGE_XFER_INC))
@@ -577,16 +550,15 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
static int denali_pio_write(struct denali_nand_info *denali,
const void *buf, size_t size, int page, int raw)
{
- uint32_t addr = DENALI_BANK(denali) | page;
+ u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
const uint32_t *buf32 = (uint32_t *)buf;
uint32_t irq_status;
int i;
denali_reset_irq(denali);
- iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
for (i = 0; i < size / 4; i++)
- iowrite32(*buf32++, denali->host + DENALI_HOST_DATA);
+ denali->host_write(denali, addr, *buf32++);
irq_status = denali_wait_for_irq(denali,
INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL);
@@ -635,19 +607,19 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
ecc_err_mask = INTR__ECC_ERR;
}
- denali_enable_dma(denali, true);
+ iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE);
denali_reset_irq(denali);
- denali_setup_dma(denali, dma_addr, page, write);
+ denali->setup_dma(denali, dma_addr, page, write);
- /* wait for operation to complete */
irq_status = denali_wait_for_irq(denali, irq_mask);
if (!(irq_status & INTR__DMA_CMD_COMP))
ret = -EIO;
else if (irq_status & ecc_err_mask)
ret = -EBADMSG;
- denali_enable_dma(denali, false);
+ iowrite32(0, denali->reg + DMA_ENABLE);
+
dma_unmap_single(denali->dev, dma_addr, size, dir);
if (irq_status & INTR__ERASED_PAGE)
@@ -659,7 +631,9 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
size_t size, int page, int raw, int write)
{
- setup_ecc_for_xfer(denali, !raw, raw);
+ iowrite32(raw ? 0 : ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
+ iowrite32(raw ? TRANSFER_SPARE_REG__FLAG : 0,
+ denali->reg + TRANSFER_SPARE_REG);
if (denali->dma_avail)
return denali_dma_xfer(denali, buf, size, page, raw, write);
@@ -970,8 +944,8 @@ static int denali_erase(struct mtd_info *mtd, int page)
denali_reset_irq(denali);
- denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
- DENALI_ERASE);
+ denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
+ DENALI_ERASE);
/* wait for erase to complete or failure to occur */
irq_status = denali_wait_for_irq(denali,
@@ -1009,7 +983,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
tmp = ioread32(denali->reg + ACC_CLKS);
tmp &= ~ACC_CLKS__VALUE;
- tmp |= acc_clks;
+ tmp |= FIELD_PREP(ACC_CLKS__VALUE, acc_clks);
iowrite32(tmp, denali->reg + ACC_CLKS);
/* tRWH -> RE_2_WE */
@@ -1018,7 +992,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
tmp = ioread32(denali->reg + RE_2_WE);
tmp &= ~RE_2_WE__VALUE;
- tmp |= re_2_we;
+ tmp |= FIELD_PREP(RE_2_WE__VALUE, re_2_we);
iowrite32(tmp, denali->reg + RE_2_WE);
/* tRHZ -> RE_2_RE */
@@ -1027,16 +1001,22 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
tmp = ioread32(denali->reg + RE_2_RE);
tmp &= ~RE_2_RE__VALUE;
- tmp |= re_2_re;
+ tmp |= FIELD_PREP(RE_2_RE__VALUE, re_2_re);
iowrite32(tmp, denali->reg + RE_2_RE);
- /* tWHR -> WE_2_RE */
- we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk);
+ /*
+ * tCCS, tWHR -> WE_2_RE
+ *
+ * With WE_2_RE properly set, the Denali controller automatically takes
+ * care of the delay; the driver need not set NAND_WAIT_TCCS.
+ */
+ we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min),
+ t_clk);
we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE);
tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE;
- tmp |= we_2_re;
+ tmp |= FIELD_PREP(TWHR2_AND_WE_2_RE__WE_2_RE, we_2_re);
iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE);
/* tADL -> ADDR_2_DATA */
@@ -1050,8 +1030,8 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
addr_2_data = min_t(int, addr_2_data, addr_2_data_mask);
tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
- tmp &= ~addr_2_data_mask;
- tmp |= addr_2_data;
+ tmp &= ~TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
+ tmp |= FIELD_PREP(TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA, addr_2_data);
iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA);
/* tREH, tWH -> RDWR_EN_HI_CNT */
@@ -1061,7 +1041,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
tmp &= ~RDWR_EN_HI_CNT__VALUE;
- tmp |= rdwr_en_hi;
+ tmp |= FIELD_PREP(RDWR_EN_HI_CNT__VALUE, rdwr_en_hi);
iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT);
/* tRP, tWP -> RDWR_EN_LO_CNT */
@@ -1075,7 +1055,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
tmp = ioread32(denali->reg + RDWR_EN_LO_CNT);
tmp &= ~RDWR_EN_LO_CNT__VALUE;
- tmp |= rdwr_en_lo;
+ tmp |= FIELD_PREP(RDWR_EN_LO_CNT__VALUE, rdwr_en_lo);
iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT);
/* tCS, tCEA -> CS_SETUP_CNT */
@@ -1086,7 +1066,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
tmp = ioread32(denali->reg + CS_SETUP_CNT);
tmp &= ~CS_SETUP_CNT__VALUE;
- tmp |= cs_setup;
+ tmp |= FIELD_PREP(CS_SETUP_CNT__VALUE, cs_setup);
iowrite32(tmp, denali->reg + CS_SETUP_CNT);
return 0;
@@ -1131,15 +1111,11 @@ static void denali_hw_init(struct denali_nand_info *denali)
* if this value is 0, just let it be.
*/
denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
- detect_max_banks(denali);
+ denali_detect_max_banks(denali);
iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
-
- /* Should set value for these registers when init */
- iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES);
- iowrite32(1, denali->reg + ECC_ENABLE);
}
int denali_calc_ecc_bytes(int step_size, int strength)
@@ -1211,22 +1187,6 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
.free = denali_ooblayout_free,
};
-/* initialize driver data structures */
-static void denali_drv_init(struct denali_nand_info *denali)
-{
- /*
- * the completion object will be used to notify
- * the callee that the interrupt is done
- */
- init_completion(&denali->complete);
-
- /*
- * the spinlock will be used to synchronize the ISR with any
- * element that might be access shared data (interrupt status)
- */
- spin_lock_init(&denali->irq_lock);
-}
-
static int denali_multidev_fixup(struct denali_nand_info *denali)
{
struct nand_chip *chip = &denali->nand;
@@ -1282,15 +1242,17 @@ int denali_init(struct denali_nand_info *denali)
{
struct nand_chip *chip = &denali->nand;
struct mtd_info *mtd = nand_to_mtd(chip);
+ u32 features = ioread32(denali->reg + FEATURES);
int ret;
mtd->dev.parent = denali->dev;
denali_hw_init(denali);
- denali_drv_init(denali);
+
+ init_completion(&denali->complete);
+ spin_lock_init(&denali->irq_lock);
denali_clear_irq_all(denali);
- /* Request IRQ after all the hardware initialization is finished */
ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
IRQF_SHARED, DENALI_NAND_NAME, denali);
if (ret) {
@@ -1308,7 +1270,6 @@ int denali_init(struct denali_nand_info *denali)
if (!mtd->name)
mtd->name = "denali-nand";
- /* register the driver with the NAND core subsystem */
chip->select_chip = denali_select_chip;
chip->read_byte = denali_read_byte;
chip->write_byte = denali_write_byte;
@@ -1317,15 +1278,18 @@ int denali_init(struct denali_nand_info *denali)
chip->dev_ready = denali_dev_ready;
chip->waitfunc = denali_waitfunc;
+ if (features & FEATURES__INDEX_ADDR) {
+ denali->host_read = denali_indexed_read;
+ denali->host_write = denali_indexed_write;
+ } else {
+ denali->host_read = denali_direct_read;
+ denali->host_write = denali_direct_write;
+ }
+
/* clk rate info is needed for setup_data_interface */
if (denali->clk_x_rate)
chip->setup_data_interface = denali_setup_data_interface;
- /*
- * scan for NAND devices attached to the controller
- * this is the first stage in a two step process to register
- * with the nand subsystem
- */
ret = nand_scan_ident(mtd, denali->max_banks, NULL);
if (ret)
goto disable_irq;
@@ -1347,20 +1311,15 @@ int denali_init(struct denali_nand_info *denali)
if (denali->dma_avail) {
chip->options |= NAND_USE_BOUNCE_BUFFER;
chip->buf_align = 16;
+ if (denali->caps & DENALI_CAP_DMA_64BIT)
+ denali->setup_dma = denali_setup_dma64;
+ else
+ denali->setup_dma = denali_setup_dma32;
}
- /*
- * second stage of the NAND scan
- * this stage requires information regarding ECC and
- * bad block management.
- */
-
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
-
chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-
- /* no subpage writes on denali */
chip->options |= NAND_NO_SUBPAGE_WRITE;
ret = denali_ecc_setup(mtd, chip, denali);
@@ -1373,12 +1332,15 @@ int denali_init(struct denali_nand_info *denali)
"chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
- iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1),
+ iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
+ FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
denali->reg + ECC_CORRECTION);
iowrite32(mtd->erasesize / mtd->writesize,
denali->reg + PAGES_PER_BLOCK);
iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
denali->reg + DEVICE_WIDTH);
+ iowrite32(chip->options & NAND_ROW_ADDR_3 ? 0 : TWO_ROW_ADDR_CYCLES__FLAG,
+ denali->reg + TWO_ROW_ADDR_CYCLES);
iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
@@ -1441,7 +1403,6 @@ disable_irq:
}
EXPORT_SYMBOL(denali_init);
-/* driver exit point */
void denali_remove(struct denali_nand_info *denali)
{
struct mtd_info *mtd = nand_to_mtd(&denali->nand);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 9239e6793e6e..2911066dacac 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -10,18 +10,16 @@
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
*/
#ifndef __DENALI_H__
#define __DENALI_H__
#include <linux/bitops.h>
+#include <linux/completion.h>
#include <linux/mtd/rawnand.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
#define DEVICE_RESET 0x0
#define DEVICE_RESET__BANK(bank) BIT(bank)
@@ -111,9 +109,6 @@
#define ECC_CORRECTION 0x1b0
#define ECC_CORRECTION__VALUE GENMASK(4, 0)
#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16)
-#define MAKE_ECC_CORRECTION(val, thresh) \
- (((val) & (ECC_CORRECTION__VALUE)) | \
- (((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD)))
#define READ_MODE 0x1c0
#define READ_MODE__VALUE GENMASK(3, 0)
@@ -255,13 +250,13 @@
#define ECC_ERROR_ADDRESS 0x630
#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0)
-#define ECC_ERROR_ADDRESS__SECTOR_NR GENMASK(15, 12)
+#define ECC_ERROR_ADDRESS__SECTOR GENMASK(15, 12)
#define ERR_CORRECTION_INFO 0x640
-#define ERR_CORRECTION_INFO__BYTEMASK GENMASK(7, 0)
-#define ERR_CORRECTION_INFO__DEVICE_NR GENMASK(11, 8)
-#define ERR_CORRECTION_INFO__ERROR_TYPE BIT(14)
-#define ERR_CORRECTION_INFO__LAST_ERR_INFO BIT(15)
+#define ERR_CORRECTION_INFO__BYTE GENMASK(7, 0)
+#define ERR_CORRECTION_INFO__DEVICE GENMASK(11, 8)
+#define ERR_CORRECTION_INFO__UNCOR BIT(14)
+#define ERR_CORRECTION_INFO__LAST_ERR BIT(15)
#define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10)
#define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8)
@@ -310,23 +305,24 @@ struct denali_nand_info {
struct device *dev;
void __iomem *reg; /* Register Interface */
void __iomem *host; /* Host Data/Command Interface */
-
- /* elements used by ISR */
struct completion complete;
- spinlock_t irq_lock;
- uint32_t irq_mask;
- uint32_t irq_status;
+ spinlock_t irq_lock; /* protect irq_mask and irq_status */
+ u32 irq_mask; /* interrupts we are waiting for */
+ u32 irq_status; /* interrupts that have happened */
int irq;
-
- void *buf;
+ void *buf; /* for syndrome layout conversion */
dma_addr_t dma_addr;
- int dma_avail;
+ int dma_avail; /* can support DMA? */
int devs_per_cs; /* devices connected in parallel */
- int oob_skip_bytes;
+ int oob_skip_bytes; /* number of bytes reserved for BBM */
int max_banks;
- unsigned int revision;
- unsigned int caps;
+ unsigned int revision; /* IP revision */
+ unsigned int caps; /* IP capability (or quirk) */
const struct nand_ecc_caps *ecc_caps;
+ u32 (*host_read)(struct denali_nand_info *denali, u32 addr);
+ void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data);
+ void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr,
+ int page, int write);
};
#define DENALI_CAP_HW_ECC_FIXUP BIT(0)
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index 56e2e177644d..cfd33e6ca77f 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -12,15 +12,16 @@
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
+
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/platform_device.h>
#include "denali.h"
@@ -155,7 +156,6 @@ static struct platform_driver denali_dt_driver = {
.of_match_table = denali_nand_dt_ids,
},
};
-
module_platform_driver(denali_dt_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
index 81370c79aa48..57fb7ae31412 100644
--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -11,6 +11,9 @@
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
+
+#include <linux/errno.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -106,7 +109,6 @@ failed_remap_reg:
return ret;
}
-/* driver exit point */
static void denali_pci_remove(struct pci_dev *dev)
{
struct denali_nand_info *denali = pci_get_drvdata(dev);
@@ -122,5 +124,4 @@ static struct pci_driver denali_pci_driver = {
.probe = denali_pci_probe,
.remove = denali_pci_remove,
};
-
module_pci_driver(denali_pci_driver);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index c3aa53caab5c..72671dc52e2e 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -705,8 +705,7 @@ static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int colu
if (page_addr != -1) {
WriteDOC((unsigned char)(page_addr & 0xff), docptr, Mplus_FlashAddress);
WriteDOC((unsigned char)((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
- /* One more address cycle for higher density devices */
- if (this->chipsize & 0x0c000000) {
+ if (this->options & NAND_ROW_ADDR_3) {
WriteDOC((unsigned char)((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
printk("high density\n");
}
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index fd3648952b5a..484f7fbc3f7d 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -23,7 +23,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
@@ -31,12 +31,16 @@
#include <linux/mtd/nand-gpio.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_gpio.h>
struct gpiomtd {
void __iomem *io_sync;
struct nand_chip nand_chip;
struct gpio_nand_platdata plat;
+ struct gpio_desc *nce; /* Optional chip enable */
+ struct gpio_desc *cle;
+ struct gpio_desc *ale;
+ struct gpio_desc *rdy;
+ struct gpio_desc *nwp; /* Optional write protection */
};
static inline struct gpiomtd *gpio_nand_getpriv(struct mtd_info *mtd)
@@ -78,11 +82,10 @@ static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
gpio_nand_dosync(gpiomtd);
if (ctrl & NAND_CTRL_CHANGE) {
- if (gpio_is_valid(gpiomtd->plat.gpio_nce))
- gpio_set_value(gpiomtd->plat.gpio_nce,
- !(ctrl & NAND_NCE));
- gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
- gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
+ if (gpiomtd->nce)
+ gpiod_set_value(gpiomtd->nce, !(ctrl & NAND_NCE));
+ gpiod_set_value(gpiomtd->cle, !!(ctrl & NAND_CLE));
+ gpiod_set_value(gpiomtd->ale, !!(ctrl & NAND_ALE));
gpio_nand_dosync(gpiomtd);
}
if (cmd == NAND_CMD_NONE)
@@ -96,7 +99,7 @@ static int gpio_nand_devready(struct mtd_info *mtd)
{
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
- return gpio_get_value(gpiomtd->plat.gpio_rdy);
+ return gpiod_get_value(gpiomtd->rdy);
}
#ifdef CONFIG_OF
@@ -123,12 +126,6 @@ static int gpio_nand_get_config_of(const struct device *dev,
}
}
- plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
- plat->gpio_nce = of_get_gpio(dev->of_node, 1);
- plat->gpio_ale = of_get_gpio(dev->of_node, 2);
- plat->gpio_cle = of_get_gpio(dev->of_node, 3);
- plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
-
if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
plat->chip_delay = val;
@@ -201,10 +198,11 @@ static int gpio_nand_remove(struct platform_device *pdev)
nand_release(nand_to_mtd(&gpiomtd->nand_chip));
- if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
- gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
- if (gpio_is_valid(gpiomtd->plat.gpio_nce))
- gpio_set_value(gpiomtd->plat.gpio_nce, 1);
+ /* Enable write protection and disable the chip */
+ if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+ gpiod_set_value(gpiomtd->nwp, 0);
+ if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
+ gpiod_set_value(gpiomtd->nce, 0);
return 0;
}
@@ -215,66 +213,66 @@ static int gpio_nand_probe(struct platform_device *pdev)
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *res;
+ struct device *dev = &pdev->dev;
int ret = 0;
- if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev))
+ if (!dev->of_node && !dev_get_platdata(dev))
return -EINVAL;
- gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
+ gpiomtd = devm_kzalloc(dev, sizeof(*gpiomtd), GFP_KERNEL);
if (!gpiomtd)
return -ENOMEM;
chip = &gpiomtd->nand_chip;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+ chip->IO_ADDR_R = devm_ioremap_resource(dev, res);
if (IS_ERR(chip->IO_ADDR_R))
return PTR_ERR(chip->IO_ADDR_R);
res = gpio_nand_get_io_sync(pdev);
if (res) {
- gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res);
+ gpiomtd->io_sync = devm_ioremap_resource(dev, res);
if (IS_ERR(gpiomtd->io_sync))
return PTR_ERR(gpiomtd->io_sync);
}
- ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat);
+ ret = gpio_nand_get_config(dev, &gpiomtd->plat);
if (ret)
return ret;
- if (gpio_is_valid(gpiomtd->plat.gpio_nce)) {
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce,
- "NAND NCE");
- if (ret)
- return ret;
- gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
+ /* Just enable the chip */
+ gpiomtd->nce = devm_gpiod_get_optional(dev, "nce", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiomtd->nce))
+ return PTR_ERR(gpiomtd->nce);
+
+ /* We disable write protection once we know probe() will succeed */
+ gpiomtd->nwp = devm_gpiod_get_optional(dev, "nwp", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiomtd->nwp)) {
+ ret = PTR_ERR(gpiomtd->nwp);
+ goto out_ce;
}
- if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
- "NAND NWP");
- if (ret)
- return ret;
+ gpiomtd->nwp = devm_gpiod_get(dev, "ale", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiomtd->nwp)) {
+ ret = PTR_ERR(gpiomtd->nwp);
+ goto out_ce;
}
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
- if (ret)
- return ret;
- gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
+ gpiomtd->cle = devm_gpiod_get(dev, "cle", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiomtd->cle)) {
+ ret = PTR_ERR(gpiomtd->cle);
+ goto out_ce;
+ }
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
- if (ret)
- return ret;
- gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
-
- if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
- "NAND RDY");
- if (ret)
- return ret;
- gpio_direction_input(gpiomtd->plat.gpio_rdy);
- chip->dev_ready = gpio_nand_devready;
+ gpiomtd->rdy = devm_gpiod_get_optional(dev, "rdy", GPIOD_IN);
+ if (IS_ERR(gpiomtd->rdy)) {
+ ret = PTR_ERR(gpiomtd->rdy);
+ goto out_ce;
}
+ /* Using RDY pin */
+ if (gpiomtd->rdy)
+ chip->dev_ready = gpio_nand_devready;
nand_set_flash_node(chip, pdev->dev.of_node);
chip->IO_ADDR_W = chip->IO_ADDR_R;
@@ -285,12 +283,13 @@ static int gpio_nand_probe(struct platform_device *pdev)
chip->cmd_ctrl = gpio_nand_cmd_ctrl;
mtd = nand_to_mtd(chip);
- mtd->dev.parent = &pdev->dev;
+ mtd->dev.parent = dev;
platform_set_drvdata(pdev, gpiomtd);
- if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
- gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
+ /* Disable write protection, if wired up */
+ if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+ gpiod_direction_output(gpiomtd->nwp, 1);
ret = nand_scan(mtd, 1);
if (ret)
@@ -305,8 +304,11 @@ static int gpio_nand_probe(struct platform_device *pdev)
return 0;
err_wp:
- if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
- gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+ if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+ gpiod_set_value(gpiomtd->nwp, 0);
+out_ce:
+ if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
+ gpiod_set_value(gpiomtd->nce, 0);
return ret;
}
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index d9ee1a7e6956..0897261c3e17 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -432,8 +432,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr)
host->addr_value[0] |= (page_addr & 0xffff)
<< (host->addr_cycle * 8);
host->addr_cycle += 2;
- /* One more address cycle for devices > 128MiB */
- if (chip->chipsize > (128 << 20)) {
+ if (chip->options & NAND_ROW_ADDR_3) {
host->addr_cycle += 1;
if (host->command == NAND_CMD_ERASE1)
host->addr_value[0] |= ((page_addr >> 16) & 0xff) << 16;
diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c
index 7f3b065b6b8f..c51d214d169e 100644
--- a/drivers/mtd/nand/mtk_ecc.c
+++ b/drivers/mtd/nand/mtk_ecc.c
@@ -115,6 +115,11 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id)
op = ECC_DECODE;
dec = readw(ecc->regs + ECC_DECDONE);
if (dec & ecc->sectors) {
+ /*
+ * Clear decode IRQ status once again to ensure that
+ * there will be no extra IRQ.
+ */
+ readw(ecc->regs + ECC_DECIRQ_STA);
ecc->sectors = 0;
complete(&ecc->done);
} else {
@@ -130,8 +135,6 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id)
}
}
- writel(0, ecc->regs + ECC_IRQ_REG(op));
-
return IRQ_HANDLED;
}
@@ -307,6 +310,12 @@ void mtk_ecc_disable(struct mtk_ecc *ecc)
/* disable it */
mtk_ecc_wait_idle(ecc, op);
+ if (op == ECC_DECODE)
+ /*
+ * Clear decode IRQ status in case there is a timeout to wait
+ * decode IRQ.
+ */
+ readw(ecc->regs + ECC_DECIRQ_STA);
writew(0, ecc->regs + ECC_IRQ_REG(op));
writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op));
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 53e5e0337c3e..f3be0b2a8869 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -415,7 +415,7 @@ static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
* waits for completion. */
static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
- pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+ dev_dbg(host->dev, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
writew(cmd, NFC_V1_V2_FLASH_CMD);
writew(NFC_CMD, NFC_V1_V2_CONFIG2);
@@ -431,7 +431,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
udelay(1);
}
if (max_retries < 0)
- pr_debug("%s: RESET failed\n", __func__);
+ dev_dbg(host->dev, "%s: RESET failed\n", __func__);
} else {
/* Wait for operation to complete */
wait_op_done(host, useirq);
@@ -454,7 +454,7 @@ static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
* a NAND command. */
static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
{
- pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
+ dev_dbg(host->dev, "send_addr(host, 0x%x %d)\n", addr, islast);
writew(addr, NFC_V1_V2_FLASH_ADDR);
writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
@@ -607,7 +607,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
uint16_t ecc_status = get_ecc_status_v1(host);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
- pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ dev_dbg(host->dev, "HWECC uncorrectable 2-bit ECC error\n");
return -EBADMSG;
}
@@ -634,7 +634,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
do {
err = ecc_stat & ecc_bit_mask;
if (err > err_limit) {
- printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+ dev_dbg(host->dev, "UnCorrectable RS-ECC Error\n");
return -EBADMSG;
} else {
ret += err;
@@ -642,7 +642,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
ecc_stat >>= 4;
} while (--no_subpages);
- pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+ dev_dbg(host->dev, "%d Symbol Correctable RS-ECC Error\n", ret);
return ret;
}
@@ -673,7 +673,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
host->buf_start++;
}
- pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
+ dev_dbg(host->dev, "%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
return ret;
}
@@ -859,8 +859,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
host->devtype_data->send_addr(host,
(page_addr >> 8) & 0xff, true);
} else {
- /* One more address cycle for higher density devices */
- if (mtd->size >= 0x4000000) {
+ if (nand_chip->options & NAND_ROW_ADDR_3) {
/* paddr_8 - paddr_15 */
host->devtype_data->send_addr(host,
(page_addr >> 8) & 0xff,
@@ -1212,7 +1211,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
struct nand_chip *nand_chip = mtd_to_nand(mtd);
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
- pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ dev_dbg(host->dev, "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
command, column, page_addr);
/* Reset command state information */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 12edaae17d81..6135d007a068 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -115,7 +115,7 @@ static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- if (section)
+ if (section || !ecc->total)
return -ERANGE;
oobregion->length = ecc->total;
@@ -727,8 +727,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
chip->cmd_ctrl(mtd, page_addr, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
chip->cmd_ctrl(mtd, page_addr >> 8, ctrl);
- /* One more address cycle for devices > 32MiB */
- if (chip->chipsize > (32 << 20))
+ if (chip->options & NAND_ROW_ADDR_3)
chip->cmd_ctrl(mtd, page_addr >> 16, ctrl);
}
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
@@ -854,8 +853,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
chip->cmd_ctrl(mtd, page_addr, ctrl);
chip->cmd_ctrl(mtd, page_addr >> 8,
NAND_NCE | NAND_ALE);
- /* One more address cycle for devices > 128MiB */
- if (chip->chipsize > (128 << 20))
+ if (chip->options & NAND_ROW_ADDR_3)
chip->cmd_ctrl(mtd, page_addr >> 16,
NAND_NCE | NAND_ALE);
}
@@ -1246,6 +1244,7 @@ int nand_reset(struct nand_chip *chip, int chipnr)
return 0;
}
+EXPORT_SYMBOL_GPL(nand_reset);
/**
* nand_check_erased_buf - check if a buffer contains (almost) only 0xff data
@@ -2799,15 +2798,18 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd_to_nand(mtd);
+ int chipnr = (int)(to >> chip->chip_shift);
struct mtd_oob_ops ops;
int ret;
- /* Wait for the device to get ready */
- panic_nand_wait(mtd, chip, 400);
-
/* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
+ chip->select_chip(mtd, chipnr);
+
+ /* Wait for the device to get ready */
+ panic_nand_wait(mtd, chip, 400);
+
memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
@@ -3999,6 +4001,9 @@ ident_done:
chip->chip_shift += 32 - 1;
}
+ if (chip->chip_shift - chip->page_shift > 16)
+ chip->options |= NAND_ROW_ADDR_3;
+
chip->badblockbits = 8;
chip->erase = single_erase;
@@ -4700,6 +4705,19 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
break;
default:
+ /*
+ * Expose the whole OOB area to users if ECC_NONE
+ * is passed. We could do that for all kind of
+ * ->oobsize, but we must keep the old large/small
+ * page with ECC layout when ->oobsize <= 128 for
+ * compatibility reasons.
+ */
+ if (ecc->mode == NAND_ECC_NONE) {
+ mtd_set_ooblayout(mtd,
+ &nand_ooblayout_lp_ops);
+ break;
+ }
+
WARN(1, "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
ret = -EINVAL;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 246b4393118e..44322a363ba5 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -520,11 +520,16 @@ static int nandsim_debugfs_create(struct nandsim *dev)
struct dentry *root = nsmtd->dbg.dfs_dir;
struct dentry *dent;
- if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ /*
+ * Just skip debugfs initialization when the debugfs directory is
+ * missing.
+ */
+ if (IS_ERR_OR_NULL(root)) {
+ if (IS_ENABLED(CONFIG_DEBUG_FS) &&
+ !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER))
+ NS_WARN("CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n");
return 0;
-
- if (IS_ERR_OR_NULL(root))
- return -1;
+ }
dent = debugfs_create_file("nandsim_wear_report", S_IRUSR,
root, dev, &dfs_fops);
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 7bb4d2ea9342..af5b32c9a791 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -154,7 +154,7 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
if (page_addr != -1) {
write_addr_reg(nand, page_addr);
- if (chip->chipsize > (128 << 20)) {
+ if (chip->options & NAND_ROW_ADDR_3) {
write_addr_reg(nand, page_addr >> 8);
write_addr_reg(nand, page_addr >> 16 | ENDADDR);
} else {
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 54540c8fa1a2..dad438c4906a 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1133,129 +1133,172 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
0x97, 0x79, 0xe5, 0x24, 0xb5};
/**
- * omap_calculate_ecc_bch - Generate bytes of ECC bytes
+ * _omap_calculate_ecc_bch - Generate ECC bytes for one sector
* @mtd: MTD device structure
* @dat: The pointer to data on which ecc is computed
* @ecc_code: The ecc_code buffer
+ * @i: The sector number (for a multi sector page)
*
- * Support calculating of BCH4/8 ecc vectors for the page
+ * Support calculating of BCH4/8/16 ECC vectors for one sector
+ * within a page. Sector number is in @i.
*/
-static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
- const u_char *dat, u_char *ecc_calc)
+static int _omap_calculate_ecc_bch(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_calc, int i)
{
struct omap_nand_info *info = mtd_to_omap(mtd);
int eccbytes = info->nand.ecc.bytes;
struct gpmc_nand_regs *gpmc_regs = &info->reg;
u8 *ecc_code;
- unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
+ unsigned long bch_val1, bch_val2, bch_val3, bch_val4;
u32 val;
- int i, j;
+ int j;
+
+ ecc_code = ecc_calc;
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH8_CODE_HW:
+ bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+ bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+ bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
+ bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
+ *ecc_code++ = (bch_val4 & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val3 & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val2 & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val1 & 0xFF);
+ break;
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH4_CODE_HW:
+ bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+ bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+ *ecc_code++ = ((bch_val2 >> 12) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 4) & 0xFF);
+ *ecc_code++ = ((bch_val2 & 0xF) << 4) |
+ ((bch_val1 >> 28) & 0xF);
+ *ecc_code++ = ((bch_val1 >> 20) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 12) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 4) & 0xFF);
+ *ecc_code++ = ((bch_val1 & 0xF) << 4);
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ val = readl(gpmc_regs->gpmc_bch_result6[i]);
+ ecc_code[0] = ((val >> 8) & 0xFF);
+ ecc_code[1] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result5[i]);
+ ecc_code[2] = ((val >> 24) & 0xFF);
+ ecc_code[3] = ((val >> 16) & 0xFF);
+ ecc_code[4] = ((val >> 8) & 0xFF);
+ ecc_code[5] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result4[i]);
+ ecc_code[6] = ((val >> 24) & 0xFF);
+ ecc_code[7] = ((val >> 16) & 0xFF);
+ ecc_code[8] = ((val >> 8) & 0xFF);
+ ecc_code[9] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result3[i]);
+ ecc_code[10] = ((val >> 24) & 0xFF);
+ ecc_code[11] = ((val >> 16) & 0xFF);
+ ecc_code[12] = ((val >> 8) & 0xFF);
+ ecc_code[13] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result2[i]);
+ ecc_code[14] = ((val >> 24) & 0xFF);
+ ecc_code[15] = ((val >> 16) & 0xFF);
+ ecc_code[16] = ((val >> 8) & 0xFF);
+ ecc_code[17] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result1[i]);
+ ecc_code[18] = ((val >> 24) & 0xFF);
+ ecc_code[19] = ((val >> 16) & 0xFF);
+ ecc_code[20] = ((val >> 8) & 0xFF);
+ ecc_code[21] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result0[i]);
+ ecc_code[22] = ((val >> 24) & 0xFF);
+ ecc_code[23] = ((val >> 16) & 0xFF);
+ ecc_code[24] = ((val >> 8) & 0xFF);
+ ecc_code[25] = ((val >> 0) & 0xFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* ECC scheme specific syndrome customizations */
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ /* Add constant polynomial to remainder, so that
+ * ECC of blank pages results in 0x0 on reading back
+ */
+ for (j = 0; j < eccbytes; j++)
+ ecc_calc[j] ^= bch4_polynomial[j];
+ break;
+ case OMAP_ECC_BCH4_CODE_HW:
+ /* Set 8th ECC byte as 0x0 for ROM compatibility */
+ ecc_calc[eccbytes - 1] = 0x0;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ /* Add constant polynomial to remainder, so that
+ * ECC of blank pages results in 0x0 on reading back
+ */
+ for (j = 0; j < eccbytes; j++)
+ ecc_calc[j] ^= bch8_polynomial[j];
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ /* Set 14th ECC byte as 0x0 for ROM compatibility */
+ ecc_calc[eccbytes - 1] = 0x0;
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used
+ * when SW based correction is required as ECC is required for one sector
+ * at a time.
+ */
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_calc)
+{
+ return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0);
+}
+
+/**
+ * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go.
+ */
+static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_calc)
+{
+ struct omap_nand_info *info = mtd_to_omap(mtd);
+ int eccbytes = info->nand.ecc.bytes;
+ unsigned long nsectors;
+ int i, ret;
nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
for (i = 0; i < nsectors; i++) {
- ecc_code = ecc_calc;
- switch (info->ecc_opt) {
- case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
- case OMAP_ECC_BCH8_CODE_HW:
- bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
- bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
- bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
- bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
- *ecc_code++ = (bch_val4 & 0xFF);
- *ecc_code++ = ((bch_val3 >> 24) & 0xFF);
- *ecc_code++ = ((bch_val3 >> 16) & 0xFF);
- *ecc_code++ = ((bch_val3 >> 8) & 0xFF);
- *ecc_code++ = (bch_val3 & 0xFF);
- *ecc_code++ = ((bch_val2 >> 24) & 0xFF);
- *ecc_code++ = ((bch_val2 >> 16) & 0xFF);
- *ecc_code++ = ((bch_val2 >> 8) & 0xFF);
- *ecc_code++ = (bch_val2 & 0xFF);
- *ecc_code++ = ((bch_val1 >> 24) & 0xFF);
- *ecc_code++ = ((bch_val1 >> 16) & 0xFF);
- *ecc_code++ = ((bch_val1 >> 8) & 0xFF);
- *ecc_code++ = (bch_val1 & 0xFF);
- break;
- case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
- case OMAP_ECC_BCH4_CODE_HW:
- bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
- bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
- *ecc_code++ = ((bch_val2 >> 12) & 0xFF);
- *ecc_code++ = ((bch_val2 >> 4) & 0xFF);
- *ecc_code++ = ((bch_val2 & 0xF) << 4) |
- ((bch_val1 >> 28) & 0xF);
- *ecc_code++ = ((bch_val1 >> 20) & 0xFF);
- *ecc_code++ = ((bch_val1 >> 12) & 0xFF);
- *ecc_code++ = ((bch_val1 >> 4) & 0xFF);
- *ecc_code++ = ((bch_val1 & 0xF) << 4);
- break;
- case OMAP_ECC_BCH16_CODE_HW:
- val = readl(gpmc_regs->gpmc_bch_result6[i]);
- ecc_code[0] = ((val >> 8) & 0xFF);
- ecc_code[1] = ((val >> 0) & 0xFF);
- val = readl(gpmc_regs->gpmc_bch_result5[i]);
- ecc_code[2] = ((val >> 24) & 0xFF);
- ecc_code[3] = ((val >> 16) & 0xFF);
- ecc_code[4] = ((val >> 8) & 0xFF);
- ecc_code[5] = ((val >> 0) & 0xFF);
- val = readl(gpmc_regs->gpmc_bch_result4[i]);
- ecc_code[6] = ((val >> 24) & 0xFF);
- ecc_code[7] = ((val >> 16) & 0xFF);
- ecc_code[8] = ((val >> 8) & 0xFF);
- ecc_code[9] = ((val >> 0) & 0xFF);
- val = readl(gpmc_regs->gpmc_bch_result3[i]);
- ecc_code[10] = ((val >> 24) & 0xFF);
- ecc_code[11] = ((val >> 16) & 0xFF);
- ecc_code[12] = ((val >> 8) & 0xFF);
- ecc_code[13] = ((val >> 0) & 0xFF);
- val = readl(gpmc_regs->gpmc_bch_result2[i]);
- ecc_code[14] = ((val >> 24) & 0xFF);
- ecc_code[15] = ((val >> 16) & 0xFF);
- ecc_code[16] = ((val >> 8) & 0xFF);
- ecc_code[17] = ((val >> 0) & 0xFF);
- val = readl(gpmc_regs->gpmc_bch_result1[i]);
- ecc_code[18] = ((val >> 24) & 0xFF);
- ecc_code[19] = ((val >> 16) & 0xFF);
- ecc_code[20] = ((val >> 8) & 0xFF);
- ecc_code[21] = ((val >> 0) & 0xFF);
- val = readl(gpmc_regs->gpmc_bch_result0[i]);
- ecc_code[22] = ((val >> 24) & 0xFF);
- ecc_code[23] = ((val >> 16) & 0xFF);
- ecc_code[24] = ((val >> 8) & 0xFF);
- ecc_code[25] = ((val >> 0) & 0xFF);
- break;
- default:
- return -EINVAL;
- }
-
- /* ECC scheme specific syndrome customizations */
- switch (info->ecc_opt) {
- case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
- /* Add constant polynomial to remainder, so that
- * ECC of blank pages results in 0x0 on reading back */
- for (j = 0; j < eccbytes; j++)
- ecc_calc[j] ^= bch4_polynomial[j];
- break;
- case OMAP_ECC_BCH4_CODE_HW:
- /* Set 8th ECC byte as 0x0 for ROM compatibility */
- ecc_calc[eccbytes - 1] = 0x0;
- break;
- case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
- /* Add constant polynomial to remainder, so that
- * ECC of blank pages results in 0x0 on reading back */
- for (j = 0; j < eccbytes; j++)
- ecc_calc[j] ^= bch8_polynomial[j];
- break;
- case OMAP_ECC_BCH8_CODE_HW:
- /* Set 14th ECC byte as 0x0 for ROM compatibility */
- ecc_calc[eccbytes - 1] = 0x0;
- break;
- case OMAP_ECC_BCH16_CODE_HW:
- break;
- default:
- return -EINVAL;
- }
+ ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i);
+ if (ret)
+ return ret;
- ecc_calc += eccbytes;
+ ecc_calc += eccbytes;
}
return 0;
@@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
chip->write_buf(mtd, buf, mtd->writesize);
/* Update ecc vector from GPMC result registers */
- chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+ omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]);
ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
chip->ecc.total);
@@ -1509,6 +1552,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * omap_write_subpage_bch - BCH hardware ECC based subpage write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @offset: column address of subpage within the page
+ * @data_len: data length
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ *
+ * OMAP optimized subpage write method.
+ */
+static int omap_write_subpage_bch(struct mtd_info *mtd,
+ struct nand_chip *chip, u32 offset,
+ u32 data_len, const u8 *buf,
+ int oob_required, int page)
+{
+ u8 *ecc_calc = chip->buffers->ecccalc;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ int ecc_steps = chip->ecc.steps;
+ u32 start_step = offset / ecc_size;
+ u32 end_step = (offset + data_len - 1) / ecc_size;
+ int step, ret = 0;
+
+ /*
+ * Write entire page at one go as it would be optimal
+ * as ECC is calculated by hardware.
+ * ECC is calculated for all subpages but we choose
+ * only what we want.
+ */
+
+ /* Enable GPMC ECC engine */
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+ /* Write data */
+ chip->write_buf(mtd, buf, mtd->writesize);
+
+ for (step = 0; step < ecc_steps; step++) {
+ /* mask ECC of un-touched subpages by padding 0xFF */
+ if (step < start_step || step > end_step)
+ memset(ecc_calc, 0xff, ecc_bytes);
+ else
+ ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step);
+
+ if (ret)
+ return ret;
+
+ buf += ecc_size;
+ ecc_calc += ecc_bytes;
+ }
+
+ /* copy calculated ECC for whole page to chip->buffer->oob */
+ /* this include masked-value(0xFF) for unwritten subpages */
+ ecc_calc = chip->buffers->ecccalc;
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
+
+ /* write OOB buffer to NAND device */
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/**
* omap_read_page_bch - BCH ecc based page read function for entire page
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
chip->ecc.total);
/* Calculate ecc bytes */
- chip->ecc.calculate(mtd, buf, ecc_calc);
+ omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc);
ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
chip->ecc.total);
@@ -1588,8 +1697,7 @@ static bool is_elm_present(struct omap_nand_info *info,
return true;
}
-static bool omap2_nand_ecc_check(struct omap_nand_info *info,
- struct omap_nand_platform_data *pdata)
+static bool omap2_nand_ecc_check(struct omap_nand_info *info)
{
bool ecc_needs_bch, ecc_needs_omap_bch, ecc_needs_elm;
@@ -1804,7 +1912,6 @@ static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = {
static int omap_nand_probe(struct platform_device *pdev)
{
struct omap_nand_info *info;
- struct omap_nand_platform_data *pdata = NULL;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
int err;
@@ -1821,29 +1928,10 @@ static int omap_nand_probe(struct platform_device *pdev)
info->pdev = pdev;
- if (dev->of_node) {
- if (omap_get_dt_info(dev, info))
- return -EINVAL;
- } else {
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "platform data missing\n");
- return -EINVAL;
- }
-
- info->gpmc_cs = pdata->cs;
- info->reg = pdata->reg;
- info->ecc_opt = pdata->ecc_opt;
- if (pdata->dev_ready)
- dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n");
-
- info->xfer_type = pdata->xfer_type;
- info->devsize = pdata->devsize;
- info->elm_of_node = pdata->elm_of_node;
- info->flash_bbt = pdata->flash_bbt;
- }
+ err = omap_get_dt_info(dev, info);
+ if (err)
+ return err;
- platform_set_drvdata(pdev, info);
info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
if (!info->ops) {
dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
@@ -2002,7 +2090,7 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
- if (!omap2_nand_ecc_check(info, pdata)) {
+ if (!omap2_nand_ecc_check(info)) {
err = -EINVAL;
goto return_error;
}
@@ -2044,7 +2132,7 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.strength = 4;
nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = nand_bch_correct_data;
- nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw;
mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
/* Reserve one byte for the OMAP marker */
oobbytes_per_step = nand_chip->ecc.bytes + 1;
@@ -2066,9 +2154,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.strength = 4;
nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = omap_elm_correct_data;
- nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
+ nand_chip->ecc.write_subpage = omap_write_subpage_bch;
mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
oobbytes_per_step = nand_chip->ecc.bytes;
@@ -2087,7 +2175,7 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.strength = 8;
nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = nand_bch_correct_data;
- nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw;
mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
/* Reserve one byte for the OMAP marker */
oobbytes_per_step = nand_chip->ecc.bytes + 1;
@@ -2109,9 +2197,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.strength = 8;
nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = omap_elm_correct_data;
- nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
+ nand_chip->ecc.write_subpage = omap_write_subpage_bch;
mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
oobbytes_per_step = nand_chip->ecc.bytes;
@@ -2131,9 +2219,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.strength = 16;
nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = omap_elm_correct_data;
- nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
+ nand_chip->ecc.write_subpage = omap_write_subpage_bch;
mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
oobbytes_per_step = nand_chip->ecc.bytes;
@@ -2167,10 +2255,9 @@ scan_tail:
if (err)
goto return_error;
- if (dev->of_node)
- mtd_device_register(mtd, NULL, 0);
- else
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+ err = mtd_device_register(mtd, NULL, 0);
+ if (err)
+ goto return_error;
platform_set_drvdata(pdev, mtd);
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 85cff68643e0..90b9a9ccbe60 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -30,6 +30,8 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200)
#define NAND_STOP_DELAY msecs_to_jiffies(40)
@@ -45,6 +47,10 @@
*/
#define INIT_BUFFER_SIZE 2048
+/* System control register and bit to enable NAND on some SoCs */
+#define GENCONF_SOC_DEVICE_MUX 0x208
+#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0)
+
/* registers and bit definitions */
#define NDCR (0x00) /* Control register */
#define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
@@ -174,6 +180,7 @@ enum {
enum pxa3xx_nand_variant {
PXA3XX_NAND_VARIANT_PXA,
PXA3XX_NAND_VARIANT_ARMADA370,
+ PXA3XX_NAND_VARIANT_ARMADA_8K,
};
struct pxa3xx_nand_host {
@@ -425,6 +432,10 @@ static const struct of_device_id pxa3xx_nand_dt_ids[] = {
.compatible = "marvell,armada370-nand",
.data = (void *)PXA3XX_NAND_VARIANT_ARMADA370,
},
+ {
+ .compatible = "marvell,armada-8k-nand",
+ .data = (void *)PXA3XX_NAND_VARIANT_ARMADA_8K,
+ },
{}
};
MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
@@ -825,7 +836,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
info->retcode = ERR_UNCORERR;
if (status & NDSR_CORERR) {
info->retcode = ERR_CORERR;
- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+ if ((info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+ info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) &&
info->ecc_bch)
info->ecc_err_cnt = NDSR_ERR_CNT(status);
else
@@ -888,7 +900,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
nand_writel(info, NDCB0, info->ndcb2);
/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+ info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
nand_writel(info, NDCB0, info->ndcb3);
}
@@ -1671,7 +1684,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
chip->options |= NAND_BUSWIDTH_16;
/* Device detection must be done with ECC disabled */
- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+ info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
nand_writel(info, NDECCCTRL, 0x0);
if (pdata->flash_bbt)
@@ -1709,7 +1723,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
* (aka splitted) command handling,
*/
if (mtd->writesize > PAGE_CHUNK_SIZE) {
- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+ info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) {
chip->cmdfunc = nand_cmdfunc_extended;
} else {
dev_err(&info->pdev->dev,
@@ -1928,6 +1943,24 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
if (!of_id)
return 0;
+ /*
+ * Some SoCs like A7k/A8k need to enable manually the NAND
+ * controller to avoid being bootloader dependent. This is done
+ * through the use of a single bit in the System Functions registers.
+ */
+ if (pxa3xx_nand_get_variant(pdev) == PXA3XX_NAND_VARIANT_ARMADA_8K) {
+ struct regmap *sysctrl_base = syscon_regmap_lookup_by_phandle(
+ pdev->dev.of_node, "marvell,system-controller");
+ u32 reg;
+
+ if (IS_ERR(sysctrl_base))
+ return PTR_ERR(sysctrl_base);
+
+ regmap_read(sysctrl_base, GENCONF_SOC_DEVICE_MUX, &reg);
+ reg |= GENCONF_SOC_DEVICE_MUX_NFC_EN;
+ regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
+ }
+
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index 3baddfc997d1..2656c1ac5646 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -22,6 +22,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/delay.h>
+#include <linux/dma/qcom_bam_dma.h>
/* NANDc reg offsets */
#define NAND_FLASH_CMD 0x00
@@ -199,6 +200,15 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \
*/
#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg))
+/* Returns the NAND register physical address */
+#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset))
+
+/* Returns the dma address for reg read buffer */
+#define reg_buf_dma_addr(chip, vaddr) \
+ ((chip)->reg_read_dma + \
+ ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf))
+
+#define QPIC_PER_CW_CMD_ELEMENTS 32
#define QPIC_PER_CW_CMD_SGL 32
#define QPIC_PER_CW_DATA_SGL 8
@@ -221,8 +231,13 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \
/*
* This data type corresponds to the BAM transaction which will be used for all
* NAND transfers.
+ * @bam_ce - the array of BAM command elements
* @cmd_sgl - sgl for NAND BAM command pipe
* @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @bam_ce_pos - the index in bam_ce which is available for next sgl
+ * @bam_ce_start - the index in bam_ce which marks the start position ce
+ * for current sgl. It will be used for size calculation
+ * for current sgl
* @cmd_sgl_pos - current index in command sgl.
* @cmd_sgl_start - start index in command sgl.
* @tx_sgl_pos - current index in data sgl for tx.
@@ -231,8 +246,11 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \
* @rx_sgl_start - start index in data sgl for rx.
*/
struct bam_transaction {
+ struct bam_cmd_element *bam_ce;
struct scatterlist *cmd_sgl;
struct scatterlist *data_sgl;
+ u32 bam_ce_pos;
+ u32 bam_ce_start;
u32 cmd_sgl_pos;
u32 cmd_sgl_start;
u32 tx_sgl_pos;
@@ -307,7 +325,8 @@ struct nandc_regs {
* controller
* @dev: parent device
* @base: MMIO base
- * @base_dma: physical base address of controller registers
+ * @base_phys: physical base address of controller registers
+ * @base_dma: dma base address of controller registers
* @core_clk: controller clock
* @aon_clk: another controller clock
*
@@ -340,6 +359,7 @@ struct qcom_nand_controller {
struct device *dev;
void __iomem *base;
+ phys_addr_t base_phys;
dma_addr_t base_dma;
struct clk *core_clk;
@@ -462,7 +482,8 @@ alloc_bam_transaction(struct qcom_nand_controller *nandc)
bam_txn_size =
sizeof(*bam_txn) + num_cw *
- ((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
+ ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
+ (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
(sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
@@ -472,6 +493,10 @@ alloc_bam_transaction(struct qcom_nand_controller *nandc)
bam_txn = bam_txn_buf;
bam_txn_buf += sizeof(*bam_txn);
+ bam_txn->bam_ce = bam_txn_buf;
+ bam_txn_buf +=
+ sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
+
bam_txn->cmd_sgl = bam_txn_buf;
bam_txn_buf +=
sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
@@ -489,6 +514,8 @@ static void clear_bam_transaction(struct qcom_nand_controller *nandc)
if (!nandc->props->is_bam)
return;
+ bam_txn->bam_ce_pos = 0;
+ bam_txn->bam_ce_start = 0;
bam_txn->cmd_sgl_pos = 0;
bam_txn->cmd_sgl_start = 0;
bam_txn->tx_sgl_pos = 0;
@@ -734,6 +761,66 @@ static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
}
/*
+ * Prepares the command descriptor for BAM DMA which will be used for NAND
+ * register reads and writes. The command descriptor requires the command
+ * to be formed in command element type so this function uses the command
+ * element from bam transaction ce array and fills the same with required
+ * data. A single SGL can contain multiple command elements so
+ * NAND_BAM_NEXT_SGL will be used for starting the separate SGL
+ * after the current command element.
+ */
+static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr,
+ int size, unsigned int flags)
+{
+ int bam_ce_size;
+ int i, ret;
+ struct bam_cmd_element *bam_ce_buffer;
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+
+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos];
+
+ /* fill the command desc */
+ for (i = 0; i < size; i++) {
+ if (read)
+ bam_prep_ce(&bam_ce_buffer[i],
+ nandc_reg_phys(nandc, reg_off + 4 * i),
+ BAM_READ_COMMAND,
+ reg_buf_dma_addr(nandc,
+ (__le32 *)vaddr + i));
+ else
+ bam_prep_ce_le32(&bam_ce_buffer[i],
+ nandc_reg_phys(nandc, reg_off + 4 * i),
+ BAM_WRITE_COMMAND,
+ *((__le32 *)vaddr + i));
+ }
+
+ bam_txn->bam_ce_pos += size;
+
+ /* use the separate sgl after this command */
+ if (flags & NAND_BAM_NEXT_SGL) {
+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start];
+ bam_ce_size = (bam_txn->bam_ce_pos -
+ bam_txn->bam_ce_start) *
+ sizeof(struct bam_cmd_element);
+ sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos],
+ bam_ce_buffer, bam_ce_size);
+ bam_txn->cmd_sgl_pos++;
+ bam_txn->bam_ce_start = bam_txn->bam_ce_pos;
+
+ if (flags & NAND_BAM_NWD) {
+ ret = prepare_bam_async_desc(nandc, nandc->cmd_chan,
+ DMA_PREP_FENCE |
+ DMA_PREP_CMD);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/*
* Prepares the data descriptor for BAM DMA which will be used for NAND
* data reads and writes.
*/
@@ -851,19 +938,22 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
{
bool flow_control = false;
void *vaddr;
- int size;
- if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
- flow_control = true;
+ vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
+ nandc->reg_read_pos += num_regs;
if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1)
first = dev_cmd_reg_addr(nandc, first);
- size = num_regs * sizeof(u32);
- vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
- nandc->reg_read_pos += num_regs;
+ if (nandc->props->is_bam)
+ return prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
+ num_regs, flags);
+
+ if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
+ flow_control = true;
- return prep_adm_dma_desc(nandc, true, first, vaddr, size, flow_control);
+ return prep_adm_dma_desc(nandc, true, first, vaddr,
+ num_regs * sizeof(u32), flow_control);
}
/*
@@ -880,13 +970,9 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
bool flow_control = false;
struct nandc_regs *regs = nandc->regs;
void *vaddr;
- int size;
vaddr = offset_to_nandc_reg(regs, first);
- if (first == NAND_FLASH_CMD)
- flow_control = true;
-
if (first == NAND_ERASED_CW_DETECT_CFG) {
if (flags & NAND_ERASED_CW_SET)
vaddr = &regs->erased_cw_detect_cfg_set;
@@ -903,10 +989,15 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD)
first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD);
- size = num_regs * sizeof(u32);
+ if (nandc->props->is_bam)
+ return prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
+ num_regs, flags);
+
+ if (first == NAND_FLASH_CMD)
+ flow_control = true;
- return prep_adm_dma_desc(nandc, false, first, vaddr, size,
- flow_control);
+ return prep_adm_dma_desc(nandc, false, first, vaddr,
+ num_regs * sizeof(u32), flow_control);
}
/*
@@ -1170,7 +1261,8 @@ static int submit_descs(struct qcom_nand_controller *nandc)
}
if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) {
- r = prepare_bam_async_desc(nandc, nandc->cmd_chan, 0);
+ r = prepare_bam_async_desc(nandc, nandc->cmd_chan,
+ DMA_PREP_CMD);
if (r)
return r;
}
@@ -2705,6 +2797,7 @@ static int qcom_nandc_probe(struct platform_device *pdev)
if (IS_ERR(nandc->base))
return PTR_ERR(nandc->base);
+ nandc->base_phys = res->start;
nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start);
nandc->core_clk = devm_clk_get(dev, "core");
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index e7f3c98487e6..3c5008a4f5f3 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -1094,14 +1094,11 @@ MODULE_DEVICE_TABLE(of, of_flctl_match);
static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
{
- const struct of_device_id *match;
- struct flctl_soc_config *config;
+ const struct flctl_soc_config *config;
struct sh_flctl_platform_data *pdata;
- match = of_match_device(of_flctl_match, dev);
- if (match)
- config = (struct flctl_soc_config *)match->data;
- else {
+ config = of_device_get_match_data(dev);
+ if (!config) {
dev_err(dev, "%s: no OF configuration attached\n", __func__);
return NULL;
}
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index d206b3c533bc..ee5ab994132f 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -6,3 +6,11 @@ config MTD_PARSER_TRX
may contain up to 3/4 partitions (depending on the version).
This driver will parse TRX header and report at least two partitions:
kernel and rootfs.
+
+config MTD_SHARPSL_PARTS
+ tristate "Sharp SL Series NAND flash partition parser"
+ depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST
+ help
+ This provides the read-only FTL logic necessary to read the partition
+ table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
+ partition parser using this code.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index 4d9024e0be3b..5b1bcc3d90d9 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
+obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
diff --git a/drivers/mtd/parsers/sharpslpart.c b/drivers/mtd/parsers/sharpslpart.c
new file mode 100644
index 000000000000..5fe0079ea5ed
--- /dev/null
+++ b/drivers/mtd/parsers/sharpslpart.c
@@ -0,0 +1,398 @@
+/*
+ * sharpslpart.c - MTD partition parser for NAND flash using the SHARP FTL
+ * for logical addressing, as used on the PXA models of the SHARP SL Series.
+ *
+ * Copyright (C) 2017 Andrea Adami <andrea.adami@gmail.com>
+ *
+ * Based on SHARP GPL 2.4 sources:
+ * http://support.ezaurus.com/developer/source/source_dl.asp
+ * drivers/mtd/nand/sharp_sl_logical.c
+ * linux/include/asm-arm/sharp_nand_logical.h
+ *
+ * Copyright (C) 2002 SHARP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+/* oob structure */
+#define NAND_NOOB_LOGADDR_00 8
+#define NAND_NOOB_LOGADDR_01 9
+#define NAND_NOOB_LOGADDR_10 10
+#define NAND_NOOB_LOGADDR_11 11
+#define NAND_NOOB_LOGADDR_20 12
+#define NAND_NOOB_LOGADDR_21 13
+
+#define BLOCK_IS_RESERVED 0xffff
+#define BLOCK_UNMASK_COMPLEMENT 1
+
+/* factory defaults */
+#define SHARPSL_NAND_PARTS 3
+#define SHARPSL_FTL_PART_SIZE (7 * SZ_1M)
+#define SHARPSL_PARTINFO1_LADDR 0x00060000
+#define SHARPSL_PARTINFO2_LADDR 0x00064000
+
+#define BOOT_MAGIC 0x424f4f54
+#define FSRO_MAGIC 0x4653524f
+#define FSRW_MAGIC 0x46535257
+
+/**
+ * struct sharpsl_ftl - Sharp FTL Logical Table
+ * @logmax: number of logical blocks
+ * @log2phy: the logical-to-physical table
+ *
+ * Structure containing the logical-to-physical translation table
+ * used by the SHARP SL FTL.
+ */
+struct sharpsl_ftl {
+ unsigned int logmax;
+ unsigned int *log2phy;
+};
+
+/* verify that the OOB bytes 8 to 15 are free and available for the FTL */
+static int sharpsl_nand_check_ooblayout(struct mtd_info *mtd)
+{
+ u8 freebytes = 0;
+ int section = 0;
+
+ while (true) {
+ struct mtd_oob_region oobfree = { };
+ int ret, i;
+
+ ret = mtd_ooblayout_free(mtd, section++, &oobfree);
+ if (ret)
+ break;
+
+ if (!oobfree.length || oobfree.offset > 15 ||
+ (oobfree.offset + oobfree.length) < 8)
+ continue;
+
+ i = oobfree.offset >= 8 ? oobfree.offset : 8;
+ for (; i < oobfree.offset + oobfree.length && i < 16; i++)
+ freebytes |= BIT(i - 8);
+
+ if (freebytes == 0xff)
+ return 0;
+ }
+
+ return -ENOTSUPP;
+}
+
+static int sharpsl_nand_read_oob(struct mtd_info *mtd, loff_t offs, u8 *buf)
+{
+ struct mtd_oob_ops ops = { };
+ int ret;
+
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = buf;
+
+ ret = mtd_read_oob(mtd, offs, &ops);
+ if (ret != 0 || mtd->oobsize != ops.oobretlen)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * The logical block number assigned to a physical block is stored in the OOB
+ * of the first page, in 3 16-bit copies with the following layout:
+ *
+ * 01234567 89abcdef
+ * -------- --------
+ * ECC BB xyxyxy
+ *
+ * When reading we check that the first two copies agree.
+ * In case of error, matching is tried using the following pairs.
+ * Reserved values 0xffff mean the block is kept for wear leveling.
+ *
+ * 01234567 89abcdef
+ * -------- --------
+ * ECC BB xyxy oob[8]==oob[10] && oob[9]==oob[11] -> byte0=8 byte1=9
+ * ECC BB xyxy oob[10]==oob[12] && oob[11]==oob[13] -> byte0=10 byte1=11
+ * ECC BB xy xy oob[12]==oob[8] && oob[13]==oob[9] -> byte0=12 byte1=13
+ */
+static int sharpsl_nand_get_logical_num(u8 *oob)
+{
+ u16 us;
+ int good0, good1;
+
+ if (oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] &&
+ oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]) {
+ good0 = NAND_NOOB_LOGADDR_00;
+ good1 = NAND_NOOB_LOGADDR_01;
+ } else if (oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] &&
+ oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]) {
+ good0 = NAND_NOOB_LOGADDR_10;
+ good1 = NAND_NOOB_LOGADDR_11;
+ } else if (oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] &&
+ oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]) {
+ good0 = NAND_NOOB_LOGADDR_20;
+ good1 = NAND_NOOB_LOGADDR_21;
+ } else {
+ return -EINVAL;
+ }
+
+ us = oob[good0] | oob[good1] << 8;
+
+ /* parity check */
+ if (hweight16(us) & BLOCK_UNMASK_COMPLEMENT)
+ return -EINVAL;
+
+ /* reserved */
+ if (us == BLOCK_IS_RESERVED)
+ return BLOCK_IS_RESERVED;
+
+ return (us >> 1) & GENMASK(9, 0);
+}
+
+static int sharpsl_nand_init_ftl(struct mtd_info *mtd, struct sharpsl_ftl *ftl)
+{
+ unsigned int block_num, log_num, phymax;
+ loff_t block_adr;
+ u8 *oob;
+ int i, ret;
+
+ oob = kzalloc(mtd->oobsize, GFP_KERNEL);
+ if (!oob)
+ return -ENOMEM;
+
+ phymax = mtd_div_by_eb(SHARPSL_FTL_PART_SIZE, mtd);
+
+ /* FTL reserves 5% of the blocks + 1 spare */
+ ftl->logmax = ((phymax * 95) / 100) - 1;
+
+ ftl->log2phy = kmalloc_array(ftl->logmax, sizeof(*ftl->log2phy),
+ GFP_KERNEL);
+ if (!ftl->log2phy) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ /* initialize ftl->log2phy */
+ for (i = 0; i < ftl->logmax; i++)
+ ftl->log2phy[i] = UINT_MAX;
+
+ /* create physical-logical table */
+ for (block_num = 0; block_num < phymax; block_num++) {
+ block_adr = block_num * mtd->erasesize;
+
+ if (mtd_block_isbad(mtd, block_adr))
+ continue;
+
+ if (sharpsl_nand_read_oob(mtd, block_adr, oob))
+ continue;
+
+ /* get logical block */
+ log_num = sharpsl_nand_get_logical_num(oob);
+
+ /* cut-off errors and skip the out-of-range values */
+ if (log_num > 0 && log_num < ftl->logmax) {
+ if (ftl->log2phy[log_num] == UINT_MAX)
+ ftl->log2phy[log_num] = block_num;
+ }
+ }
+
+ pr_info("Sharp SL FTL: %d blocks used (%d logical, %d reserved)\n",
+ phymax, ftl->logmax, phymax - ftl->logmax);
+
+ ret = 0;
+exit:
+ kfree(oob);
+ return ret;
+}
+
+void sharpsl_nand_cleanup_ftl(struct sharpsl_ftl *ftl)
+{
+ kfree(ftl->log2phy);
+}
+
+static int sharpsl_nand_read_laddr(struct mtd_info *mtd,
+ loff_t from,
+ size_t len,
+ void *buf,
+ struct sharpsl_ftl *ftl)
+{
+ unsigned int log_num, final_log_num;
+ unsigned int block_num;
+ loff_t block_adr;
+ loff_t block_ofs;
+ size_t retlen;
+ int err;
+
+ log_num = mtd_div_by_eb((u32)from, mtd);
+ final_log_num = mtd_div_by_eb(((u32)from + len - 1), mtd);
+
+ if (len <= 0 || log_num >= ftl->logmax || final_log_num > log_num)
+ return -EINVAL;
+
+ block_num = ftl->log2phy[log_num];
+ block_adr = block_num * mtd->erasesize;
+ block_ofs = mtd_mod_by_eb((u32)from, mtd);
+
+ err = mtd_read(mtd, block_adr + block_ofs, len, &retlen, buf);
+ /* Ignore corrected ECC errors */
+ if (mtd_is_bitflip(err))
+ err = 0;
+
+ if (!err && retlen != len)
+ err = -EIO;
+
+ if (err)
+ pr_err("sharpslpart: error, read failed at %#llx\n",
+ block_adr + block_ofs);
+
+ return err;
+}
+
+/*
+ * MTD Partition Parser
+ *
+ * Sample values read from SL-C860
+ *
+ * # cat /proc/mtd
+ * dev: size erasesize name
+ * mtd0: 006d0000 00020000 "Filesystem"
+ * mtd1: 00700000 00004000 "smf"
+ * mtd2: 03500000 00004000 "root"
+ * mtd3: 04400000 00004000 "home"
+ *
+ * PARTITIONINFO1
+ * 0x00060000: 00 00 00 00 00 00 70 00 42 4f 4f 54 00 00 00 00 ......p.BOOT....
+ * 0x00060010: 00 00 70 00 00 00 c0 03 46 53 52 4f 00 00 00 00 ..p.....FSRO....
+ * 0x00060020: 00 00 c0 03 00 00 00 04 46 53 52 57 00 00 00 00 ........FSRW....
+ */
+struct sharpsl_nand_partinfo {
+ __le32 start;
+ __le32 end;
+ __be32 magic;
+ u32 reserved;
+};
+
+static int sharpsl_nand_read_partinfo(struct mtd_info *master,
+ loff_t from,
+ size_t len,
+ struct sharpsl_nand_partinfo *buf,
+ struct sharpsl_ftl *ftl)
+{
+ int ret;
+
+ ret = sharpsl_nand_read_laddr(master, from, len, buf, ftl);
+ if (ret)
+ return ret;
+
+ /* check for magics */
+ if (be32_to_cpu(buf[0].magic) != BOOT_MAGIC ||
+ be32_to_cpu(buf[1].magic) != FSRO_MAGIC ||
+ be32_to_cpu(buf[2].magic) != FSRW_MAGIC) {
+ pr_err("sharpslpart: magic values mismatch\n");
+ return -EINVAL;
+ }
+
+ /* fixup for hardcoded value 64 MiB (for older models) */
+ buf[2].end = cpu_to_le32(master->size);
+
+ /* extra sanity check */
+ if (le32_to_cpu(buf[0].end) <= le32_to_cpu(buf[0].start) ||
+ le32_to_cpu(buf[1].start) < le32_to_cpu(buf[0].end) ||
+ le32_to_cpu(buf[1].end) <= le32_to_cpu(buf[1].start) ||
+ le32_to_cpu(buf[2].start) < le32_to_cpu(buf[1].end) ||
+ le32_to_cpu(buf[2].end) <= le32_to_cpu(buf[2].start)) {
+ pr_err("sharpslpart: partition sizes mismatch\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sharpsl_parse_mtd_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct sharpsl_ftl ftl;
+ struct sharpsl_nand_partinfo buf[SHARPSL_NAND_PARTS];
+ struct mtd_partition *sharpsl_nand_parts;
+ int err;
+
+ /* check that OOB bytes 8 to 15 used by the FTL are actually free */
+ err = sharpsl_nand_check_ooblayout(master);
+ if (err)
+ return err;
+
+ /* init logical mgmt (FTL) */
+ err = sharpsl_nand_init_ftl(master, &ftl);
+ if (err)
+ return err;
+
+ /* read and validate first partition table */
+ pr_info("sharpslpart: try reading first partition table\n");
+ err = sharpsl_nand_read_partinfo(master,
+ SHARPSL_PARTINFO1_LADDR,
+ sizeof(buf), buf, &ftl);
+ if (err) {
+ /* fallback: read second partition table */
+ pr_warn("sharpslpart: first partition table is invalid, retry using the second\n");
+ err = sharpsl_nand_read_partinfo(master,
+ SHARPSL_PARTINFO2_LADDR,
+ sizeof(buf), buf, &ftl);
+ }
+
+ /* cleanup logical mgmt (FTL) */
+ sharpsl_nand_cleanup_ftl(&ftl);
+
+ if (err) {
+ pr_err("sharpslpart: both partition tables are invalid\n");
+ return err;
+ }
+
+ sharpsl_nand_parts = kzalloc(sizeof(*sharpsl_nand_parts) *
+ SHARPSL_NAND_PARTS, GFP_KERNEL);
+ if (!sharpsl_nand_parts)
+ return -ENOMEM;
+
+ /* original names */
+ sharpsl_nand_parts[0].name = "smf";
+ sharpsl_nand_parts[0].offset = le32_to_cpu(buf[0].start);
+ sharpsl_nand_parts[0].size = le32_to_cpu(buf[0].end) -
+ le32_to_cpu(buf[0].start);
+
+ sharpsl_nand_parts[1].name = "root";
+ sharpsl_nand_parts[1].offset = le32_to_cpu(buf[1].start);
+ sharpsl_nand_parts[1].size = le32_to_cpu(buf[1].end) -
+ le32_to_cpu(buf[1].start);
+
+ sharpsl_nand_parts[2].name = "home";
+ sharpsl_nand_parts[2].offset = le32_to_cpu(buf[2].start);
+ sharpsl_nand_parts[2].size = le32_to_cpu(buf[2].end) -
+ le32_to_cpu(buf[2].start);
+
+ *pparts = sharpsl_nand_parts;
+ return SHARPSL_NAND_PARTS;
+}
+
+static struct mtd_part_parser sharpsl_mtd_parser = {
+ .parse_fn = sharpsl_parse_mtd_partitions,
+ .name = "sharpslpart",
+};
+module_mtd_part_parser(sharpsl_mtd_parser);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrea Adami <andrea.adami@gmail.com>");
+MODULE_DESCRIPTION("MTD partitioning for NAND flash on Sharp SL Series");
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 69c638dd0484..89da88e59121 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -50,7 +50,7 @@ config SPI_ATMEL_QUADSPI
config SPI_CADENCE_QUADSPI
tristate "Cadence Quad SPI controller"
- depends on OF && (ARM || COMPILE_TEST)
+ depends on OF && (ARM || ARM64 || COMPILE_TEST)
help
Enable support for the Cadence Quad SPI Flash controller.
@@ -90,7 +90,7 @@ config SPI_INTEL_SPI
tristate
config SPI_INTEL_SPI_PCI
- tristate "Intel PCH/PCU SPI flash PCI driver" if EXPERT
+ tristate "Intel PCH/PCU SPI flash PCI driver"
depends on X86 && PCI
select SPI_INTEL_SPI
help
@@ -106,7 +106,7 @@ config SPI_INTEL_SPI_PCI
will be called intel-spi-pci.
config SPI_INTEL_SPI_PLATFORM
- tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT
+ tristate "Intel PCH/PCU SPI flash platform driver"
depends on X86
select SPI_INTEL_SPI
help
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 53c7d8e0327a..75a2bc447a99 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -31,6 +31,7 @@
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/spi/spi.h>
#include <linux/timer.h>
@@ -38,6 +39,9 @@
#define CQSPI_NAME "cadence-qspi"
#define CQSPI_MAX_CHIPSELECT 16
+/* Quirks */
+#define CQSPI_NEEDS_WR_DELAY BIT(0)
+
struct cqspi_st;
struct cqspi_flash_pdata {
@@ -75,7 +79,9 @@ struct cqspi_st {
bool is_decoded_cs;
u32 fifo_depth;
u32 fifo_width;
+ bool rclk_en;
u32 trigger_address;
+ u32 wr_delay;
struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
};
@@ -608,6 +614,15 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor,
reinit_completion(&cqspi->transfer_complete);
writel(CQSPI_REG_INDIRECTWR_START_MASK,
reg_base + CQSPI_REG_INDIRECTWR);
+ /*
+ * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access
+ * Controller programming sequence, couple of cycles of
+ * QSPI_REF_CLK delay is required for the above bit to
+ * be internally synchronized by the QSPI module. Provide 5
+ * cycles of delay.
+ */
+ if (cqspi->wr_delay)
+ ndelay(cqspi->wr_delay);
while (remaining > 0) {
write_bytes = remaining > page_size ? page_size : remaining;
@@ -775,7 +790,7 @@ static void cqspi_config_baudrate_div(struct cqspi_st *cqspi)
}
static void cqspi_readdata_capture(struct cqspi_st *cqspi,
- const unsigned int bypass,
+ const bool bypass,
const unsigned int delay)
{
void __iomem *reg_base = cqspi->iobase;
@@ -839,7 +854,8 @@ static void cqspi_configure(struct spi_nor *nor)
cqspi->sclk = sclk;
cqspi_config_baudrate_div(cqspi);
cqspi_delay(nor);
- cqspi_readdata_capture(cqspi, 1, f_pdata->read_delay);
+ cqspi_readdata_capture(cqspi, !cqspi->rclk_en,
+ f_pdata->read_delay);
}
if (switch_cs || switch_ck)
@@ -1036,6 +1052,8 @@ static int cqspi_of_get_pdata(struct platform_device *pdev)
return -ENXIO;
}
+ cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en");
+
return 0;
}
@@ -1156,6 +1174,7 @@ static int cqspi_probe(struct platform_device *pdev)
struct cqspi_st *cqspi;
struct resource *res;
struct resource *res_ahb;
+ unsigned long data;
int ret;
int irq;
@@ -1206,13 +1225,24 @@ static int cqspi_probe(struct platform_device *pdev)
return -ENXIO;
}
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(dev);
+ return ret;
+ }
+
ret = clk_prepare_enable(cqspi->clk);
if (ret) {
dev_err(dev, "Cannot enable QSPI clock.\n");
- return ret;
+ goto probe_clk_failed;
}
cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
+ data = (unsigned long)of_device_get_match_data(dev);
+ if (data & CQSPI_NEEDS_WR_DELAY)
+ cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC,
+ cqspi->master_ref_clk_hz);
ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0,
pdev->name, cqspi);
@@ -1233,10 +1263,13 @@ static int cqspi_probe(struct platform_device *pdev)
}
return ret;
-probe_irq_failed:
- cqspi_controller_enable(cqspi, 0);
probe_setup_failed:
+ cqspi_controller_enable(cqspi, 0);
+probe_irq_failed:
clk_disable_unprepare(cqspi->clk);
+probe_clk_failed:
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
return ret;
}
@@ -1253,6 +1286,9 @@ static int cqspi_remove(struct platform_device *pdev)
clk_disable_unprepare(cqspi->clk);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
@@ -1284,7 +1320,14 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = {
#endif
static const struct of_device_id cqspi_dt_ids[] = {
- {.compatible = "cdns,qspi-nor",},
+ {
+ .compatible = "cdns,qspi-nor",
+ .data = (void *)0,
+ },
+ {
+ .compatible = "ti,k2g-qspi",
+ .data = (void *)CQSPI_NEEDS_WR_DELAY,
+ },
{ /* end of table */ }
};
diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c
index e82652335ede..c0976f2e3dd1 100644
--- a/drivers/mtd/spi-nor/intel-spi-pci.c
+++ b/drivers/mtd/spi-nor/intel-spi-pci.c
@@ -63,7 +63,10 @@ static void intel_spi_pci_remove(struct pci_dev *pdev)
}
static const struct pci_device_id intel_spi_pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
{ },
};
MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index 8a596bfeddff..ef034d898a23 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -67,8 +67,6 @@
#define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT)
#define PR_RPE BIT(15)
#define PR_BASE_MASK 0x3fff
-/* Last PR is GPR0 */
-#define PR_NUM (5 + 1)
/* Offsets are from @ispi->sregs */
#define SSFSTS_CTL 0x00
@@ -90,20 +88,35 @@
#define OPMENU0 0x08
#define OPMENU1 0x0c
+#define OPTYPE_READ_NO_ADDR 0
+#define OPTYPE_WRITE_NO_ADDR 1
+#define OPTYPE_READ_WITH_ADDR 2
+#define OPTYPE_WRITE_WITH_ADDR 3
+
/* CPU specifics */
#define BYT_PR 0x74
#define BYT_SSFSTS_CTL 0x90
#define BYT_BCR 0xfc
#define BYT_BCR_WPD BIT(0)
#define BYT_FREG_NUM 5
+#define BYT_PR_NUM 5
#define LPT_PR 0x74
#define LPT_SSFSTS_CTL 0x90
#define LPT_FREG_NUM 5
+#define LPT_PR_NUM 5
#define BXT_PR 0x84
#define BXT_SSFSTS_CTL 0xa0
#define BXT_FREG_NUM 12
+#define BXT_PR_NUM 6
+
+#define LVSCC 0xc4
+#define UVSCC 0xc8
+#define ERASE_OPCODE_SHIFT 8
+#define ERASE_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT)
+#define ERASE_64K_OPCODE_SHIFT 16
+#define ERASE_64K_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT)
#define INTEL_SPI_TIMEOUT 5000 /* ms */
#define INTEL_SPI_FIFO_SZ 64
@@ -117,8 +130,11 @@
* @pregs: Start of protection registers
* @sregs: Start of software sequencer registers
* @nregions: Maximum number of regions
+ * @pr_num: Maximum number of protected range registers
* @writeable: Is the chip writeable
- * @swseq: Use SW sequencer in register reads/writes
+ * @locked: Is SPI setting locked
+ * @swseq_reg: Use SW sequencer in register reads/writes
+ * @swseq_erase: Use SW sequencer in erase operation
* @erase_64k: 64k erase supported
* @opcodes: Opcodes which are supported. This are programmed by BIOS
* before it locks down the controller.
@@ -132,8 +148,11 @@ struct intel_spi {
void __iomem *pregs;
void __iomem *sregs;
size_t nregions;
+ size_t pr_num;
bool writeable;
- bool swseq;
+ bool locked;
+ bool swseq_reg;
+ bool swseq_erase;
bool erase_64k;
u8 opcodes[8];
u8 preopcodes[2];
@@ -167,7 +186,7 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
for (i = 0; i < ispi->nregions; i++)
dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
readl(ispi->base + FREG(i)));
- for (i = 0; i < PR_NUM; i++)
+ for (i = 0; i < ispi->pr_num; i++)
dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
readl(ispi->pregs + PR(i)));
@@ -181,8 +200,11 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
if (ispi->info->type == INTEL_SPI_BYT)
dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));
+ dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC));
+ dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC));
+
dev_dbg(ispi->dev, "Protected regions:\n");
- for (i = 0; i < PR_NUM; i++) {
+ for (i = 0; i < ispi->pr_num; i++) {
u32 base, limit;
value = readl(ispi->pregs + PR(i));
@@ -214,7 +236,9 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
}
dev_dbg(ispi->dev, "Using %cW sequencer for register access\n",
- ispi->swseq ? 'S' : 'H');
+ ispi->swseq_reg ? 'S' : 'H');
+ dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n",
+ ispi->swseq_erase ? 'S' : 'H');
}
/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */
@@ -278,7 +302,7 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
static int intel_spi_init(struct intel_spi *ispi)
{
- u32 opmenu0, opmenu1, val;
+ u32 opmenu0, opmenu1, lvscc, uvscc, val;
int i;
switch (ispi->info->type) {
@@ -286,6 +310,8 @@ static int intel_spi_init(struct intel_spi *ispi)
ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
ispi->pregs = ispi->base + BYT_PR;
ispi->nregions = BYT_FREG_NUM;
+ ispi->pr_num = BYT_PR_NUM;
+ ispi->swseq_reg = true;
if (writeable) {
/* Disable write protection */
@@ -305,12 +331,15 @@ static int intel_spi_init(struct intel_spi *ispi)
ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
ispi->pregs = ispi->base + LPT_PR;
ispi->nregions = LPT_FREG_NUM;
+ ispi->pr_num = LPT_PR_NUM;
+ ispi->swseq_reg = true;
break;
case INTEL_SPI_BXT:
ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
ispi->pregs = ispi->base + BXT_PR;
ispi->nregions = BXT_FREG_NUM;
+ ispi->pr_num = BXT_PR_NUM;
ispi->erase_64k = true;
break;
@@ -318,42 +347,64 @@ static int intel_spi_init(struct intel_spi *ispi)
return -EINVAL;
}
- /* Disable #SMI generation */
+ /* Disable #SMI generation from HW sequencer */
val = readl(ispi->base + HSFSTS_CTL);
val &= ~HSFSTS_CTL_FSMIE;
writel(val, ispi->base + HSFSTS_CTL);
/*
- * BIOS programs allowed opcodes and then locks down the register.
- * So read back what opcodes it decided to support. That's the set
- * we are going to support as well.
+ * Determine whether erase operation should use HW or SW sequencer.
+ *
+ * The HW sequencer has a predefined list of opcodes, with only the
+ * erase opcode being programmable in LVSCC and UVSCC registers.
+ * If these registers don't contain a valid erase opcode, erase
+ * cannot be done using HW sequencer.
*/
- opmenu0 = readl(ispi->sregs + OPMENU0);
- opmenu1 = readl(ispi->sregs + OPMENU1);
+ lvscc = readl(ispi->base + LVSCC);
+ uvscc = readl(ispi->base + UVSCC);
+ if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK))
+ ispi->swseq_erase = true;
+ /* SPI controller on Intel BXT supports 64K erase opcode */
+ if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase)
+ if (!(lvscc & ERASE_64K_OPCODE_MASK) ||
+ !(uvscc & ERASE_64K_OPCODE_MASK))
+ ispi->erase_64k = false;
/*
* Some controllers can only do basic operations using hardware
* sequencer. All other operations are supposed to be carried out
- * using software sequencer. If we find that BIOS has programmed
- * opcodes for the software sequencer we use that over the hardware
- * sequencer.
+ * using software sequencer.
*/
- if (opmenu0 && opmenu1) {
- for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
- ispi->opcodes[i] = opmenu0 >> i * 8;
- ispi->opcodes[i + 4] = opmenu1 >> i * 8;
- }
-
- val = readl(ispi->sregs + PREOP_OPTYPE);
- ispi->preopcodes[0] = val;
- ispi->preopcodes[1] = val >> 8;
-
+ if (ispi->swseq_reg) {
/* Disable #SMI generation from SW sequencer */
val = readl(ispi->sregs + SSFSTS_CTL);
val &= ~SSFSTS_CTL_FSMIE;
writel(val, ispi->sregs + SSFSTS_CTL);
+ }
+
+ /* Check controller's lock status */
+ val = readl(ispi->base + HSFSTS_CTL);
+ ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN);
+
+ if (ispi->locked) {
+ /*
+ * BIOS programs allowed opcodes and then locks down the
+ * register. So read back what opcodes it decided to support.
+ * That's the set we are going to support as well.
+ */
+ opmenu0 = readl(ispi->sregs + OPMENU0);
+ opmenu1 = readl(ispi->sregs + OPMENU1);
- ispi->swseq = true;
+ if (opmenu0 && opmenu1) {
+ for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
+ ispi->opcodes[i] = opmenu0 >> i * 8;
+ ispi->opcodes[i + 4] = opmenu1 >> i * 8;
+ }
+
+ val = readl(ispi->sregs + PREOP_OPTYPE);
+ ispi->preopcodes[0] = val;
+ ispi->preopcodes[1] = val >> 8;
+ }
}
intel_spi_dump_regs(ispi);
@@ -361,18 +412,28 @@ static int intel_spi_init(struct intel_spi *ispi)
return 0;
}
-static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode)
+static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype)
{
int i;
+ int preop;
- for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
- if (ispi->opcodes[i] == opcode)
- return i;
- return -EINVAL;
+ if (ispi->locked) {
+ for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
+ if (ispi->opcodes[i] == opcode)
+ return i;
+
+ return -EINVAL;
+ }
+
+ /* The lock is off, so just use index 0 */
+ writel(opcode, ispi->sregs + OPMENU0);
+ preop = readw(ispi->sregs + PREOP_OPTYPE);
+ writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE);
+
+ return 0;
}
-static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
- int len)
+static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, int len)
{
u32 val, status;
int ret;
@@ -394,6 +455,9 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
return -EINVAL;
}
+ if (len > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT;
val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
val |= HSFSTS_CTL_FGO;
@@ -412,27 +476,39 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
return 0;
}
-static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
- int len)
+static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len,
+ int optype)
{
- u32 val, status;
+ u32 val = 0, status;
+ u16 preop;
int ret;
- ret = intel_spi_opcode_index(ispi, opcode);
+ ret = intel_spi_opcode_index(ispi, opcode, optype);
if (ret < 0)
return ret;
- val = (len << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
+ if (len > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
+ /* Only mark 'Data Cycle' bit when there is data to be transferred */
+ if (len > 0)
+ val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
val |= ret << SSFSTS_CTL_COP_SHIFT;
val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
val |= SSFSTS_CTL_SCGO;
+ preop = readw(ispi->sregs + PREOP_OPTYPE);
+ if (preop) {
+ val |= SSFSTS_CTL_ACS;
+ if (preop >> 8)
+ val |= SSFSTS_CTL_SPOP;
+ }
writel(val, ispi->sregs + SSFSTS_CTL);
ret = intel_spi_wait_sw_busy(ispi);
if (ret)
return ret;
- status = readl(ispi->base + SSFSTS_CTL);
+ status = readl(ispi->sregs + SSFSTS_CTL);
if (status & SSFSTS_CTL_FCERR)
return -EIO;
else if (status & SSFSTS_CTL_AEL)
@@ -449,10 +525,11 @@ static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
/* Address of the first chip */
writel(0, ispi->base + FADDR);
- if (ispi->swseq)
- ret = intel_spi_sw_cycle(ispi, opcode, buf, len);
+ if (ispi->swseq_reg)
+ ret = intel_spi_sw_cycle(ispi, opcode, len,
+ OPTYPE_READ_NO_ADDR);
else
- ret = intel_spi_hw_cycle(ispi, opcode, buf, len);
+ ret = intel_spi_hw_cycle(ispi, opcode, len);
if (ret)
return ret;
@@ -467,10 +544,15 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
/*
* This is handled with atomic operation and preop code in Intel
- * controller so skip it here now.
+ * controller so skip it here now. If the controller is not locked,
+ * program the opcode to the PREOP register for later use.
*/
- if (opcode == SPINOR_OP_WREN)
+ if (opcode == SPINOR_OP_WREN) {
+ if (!ispi->locked)
+ writel(opcode, ispi->sregs + PREOP_OPTYPE);
+
return 0;
+ }
writel(0, ispi->base + FADDR);
@@ -479,9 +561,10 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
if (ret)
return ret;
- if (ispi->swseq)
- return intel_spi_sw_cycle(ispi, opcode, buf, len);
- return intel_spi_hw_cycle(ispi, opcode, buf, len);
+ if (ispi->swseq_reg)
+ return intel_spi_sw_cycle(ispi, opcode, len,
+ OPTYPE_WRITE_NO_ADDR);
+ return intel_spi_hw_cycle(ispi, opcode, len);
}
static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
@@ -561,12 +644,6 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
val |= HSFSTS_CTL_FCYCLE_WRITE;
- /* Write enable */
- if (ispi->preopcodes[1] == SPINOR_OP_WREN)
- val |= SSFSTS_CTL_SPOP;
- val |= SSFSTS_CTL_ACS;
- writel(val, ispi->base + HSFSTS_CTL);
-
ret = intel_spi_write_block(ispi, write_buf, block_size);
if (ret) {
dev_err(ispi->dev, "failed to write block\n");
@@ -574,8 +651,8 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
}
/* Start the write now */
- val = readl(ispi->base + HSFSTS_CTL);
- writel(val | HSFSTS_CTL_FGO, ispi->base + HSFSTS_CTL);
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
ret = intel_spi_wait_hw_busy(ispi);
if (ret) {
@@ -620,6 +697,22 @@ static int intel_spi_erase(struct spi_nor *nor, loff_t offs)
erase_size = SZ_4K;
}
+ if (ispi->swseq_erase) {
+ while (len > 0) {
+ writel(offs, ispi->base + FADDR);
+
+ ret = intel_spi_sw_cycle(ispi, nor->erase_opcode,
+ 0, OPTYPE_WRITE_WITH_ADDR);
+ if (ret)
+ return ret;
+
+ offs += erase_size;
+ len -= erase_size;
+ }
+
+ return 0;
+ }
+
while (len > 0) {
writel(offs, ispi->base + FADDR);
@@ -652,7 +745,7 @@ static bool intel_spi_is_protected(const struct intel_spi *ispi,
{
int i;
- for (i = 0; i < PR_NUM; i++) {
+ for (i = 0; i < ispi->pr_num; i++) {
u32 pr_base, pr_limit, pr_value;
pr_value = readl(ispi->pregs + PR(i));
diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
index c258c7adf1c5..abe455ccd68b 100644
--- a/drivers/mtd/spi-nor/mtk-quadspi.c
+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
@@ -404,6 +404,29 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
return ret;
}
+static void mt8173_nor_disable_clk(struct mt8173_nor *mt8173_nor)
+{
+ clk_disable_unprepare(mt8173_nor->spi_clk);
+ clk_disable_unprepare(mt8173_nor->nor_clk);
+}
+
+static int mt8173_nor_enable_clk(struct mt8173_nor *mt8173_nor)
+{
+ int ret;
+
+ ret = clk_prepare_enable(mt8173_nor->spi_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(mt8173_nor->nor_clk);
+ if (ret) {
+ clk_disable_unprepare(mt8173_nor->spi_clk);
+ return ret;
+ }
+
+ return 0;
+}
+
static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
struct device_node *flash_node)
{
@@ -468,15 +491,11 @@ static int mtk_nor_drv_probe(struct platform_device *pdev)
return PTR_ERR(mt8173_nor->nor_clk);
mt8173_nor->dev = &pdev->dev;
- ret = clk_prepare_enable(mt8173_nor->spi_clk);
+
+ ret = mt8173_nor_enable_clk(mt8173_nor);
if (ret)
return ret;
- ret = clk_prepare_enable(mt8173_nor->nor_clk);
- if (ret) {
- clk_disable_unprepare(mt8173_nor->spi_clk);
- return ret;
- }
/* only support one attached flash */
flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
if (!flash_np) {
@@ -487,10 +506,9 @@ static int mtk_nor_drv_probe(struct platform_device *pdev)
ret = mtk_nor_init(mt8173_nor, flash_np);
nor_free:
- if (ret) {
- clk_disable_unprepare(mt8173_nor->spi_clk);
- clk_disable_unprepare(mt8173_nor->nor_clk);
- }
+ if (ret)
+ mt8173_nor_disable_clk(mt8173_nor);
+
return ret;
}
@@ -498,11 +516,38 @@ static int mtk_nor_drv_remove(struct platform_device *pdev)
{
struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
- clk_disable_unprepare(mt8173_nor->spi_clk);
- clk_disable_unprepare(mt8173_nor->nor_clk);
+ mt8173_nor_disable_clk(mt8173_nor);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_nor_suspend(struct device *dev)
+{
+ struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
+
+ mt8173_nor_disable_clk(mt8173_nor);
+
return 0;
}
+static int mtk_nor_resume(struct device *dev)
+{
+ struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
+
+ return mt8173_nor_enable_clk(mt8173_nor);
+}
+
+static const struct dev_pm_ops mtk_nor_dev_pm_ops = {
+ .suspend = mtk_nor_suspend,
+ .resume = mtk_nor_resume,
+};
+
+#define MTK_NOR_DEV_PM_OPS (&mtk_nor_dev_pm_ops)
+#else
+#define MTK_NOR_DEV_PM_OPS NULL
+#endif
+
static const struct of_device_id mtk_nor_of_ids[] = {
{ .compatible = "mediatek,mt8173-nor"},
{ /* sentinel */ }
@@ -514,6 +559,7 @@ static struct platform_driver mtk_nor_driver = {
.remove = mtk_nor_drv_remove,
.driver = {
.name = "mtk-nor",
+ .pm = MTK_NOR_DEV_PM_OPS,
.of_match_table = mtk_nor_of_ids,
},
};
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 19c000722cbc..bc266f70a15b 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -89,6 +89,8 @@ struct flash_info {
#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
#define USE_CLSR BIT(14) /* use CLSR command */
+
+ int (*quad_enable)(struct spi_nor *nor);
};
#define JEDEC_MFR(info) ((info)->id[0])
@@ -870,6 +872,8 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
return ret;
}
+static int macronix_quad_enable(struct spi_nor *nor);
+
/* Used when the "_ext_id" is two bytes at most */
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
.id = { \
@@ -964,6 +968,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
/* Everspin */
+ { "mr25h128", CAT25_INFO( 16 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
@@ -983,6 +988,11 @@ static const struct flash_info spi_nor_ids[] = {
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
+ "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
+ {
"gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
@@ -997,6 +1007,12 @@ static const struct flash_info spi_nor_ids[] = {
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
+ {
+ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ .quad_enable = macronix_quad_enable,
+ },
/* Intel/Numonyx -- xxxs33b */
{ "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
@@ -1024,7 +1040,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
@@ -1137,6 +1153,11 @@ static const struct flash_info spi_nor_ids[] = {
{ "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
{ "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
+ {
+ "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
@@ -2288,8 +2309,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
/* Check the SFDP header version. */
if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
- header.major != SFDP_JESD216_MAJOR ||
- header.minor < SFDP_JESD216_MINOR)
+ header.major != SFDP_JESD216_MAJOR)
return -EINVAL;
/*
@@ -2427,6 +2447,15 @@ static int spi_nor_init_params(struct spi_nor *nor,
params->quad_enable = spansion_quad_enable;
break;
}
+
+ /*
+ * Some manufacturer like GigaDevice may use different
+ * bit to set QE on different memories, so the MFR can't
+ * indicate the quad_enable method for this case, we need
+ * set it in flash info list.
+ */
+ if (info->quad_enable)
+ params->quad_enable = info->quad_enable;
}
/* Override the parameters with data read from SFDP tables. */
@@ -2630,17 +2659,60 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
/* Enable Quad I/O if needed. */
enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
spi_nor_get_protocol_width(nor->write_proto) == 4);
- if (enable_quad_io && params->quad_enable) {
- err = params->quad_enable(nor);
+ if (enable_quad_io && params->quad_enable)
+ nor->quad_enable = params->quad_enable;
+ else
+ nor->quad_enable = NULL;
+
+ return 0;
+}
+
+static int spi_nor_init(struct spi_nor *nor)
+{
+ int err;
+
+ /*
+ * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
+ * with the software protection bits set
+ */
+ if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
+ JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
+ JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
+ nor->info->flags & SPI_NOR_HAS_LOCK) {
+ write_enable(nor);
+ write_sr(nor, 0);
+ spi_nor_wait_till_ready(nor);
+ }
+
+ if (nor->quad_enable) {
+ err = nor->quad_enable(nor);
if (err) {
dev_err(nor->dev, "quad mode not supported\n");
return err;
}
}
+ if ((nor->addr_width == 4) &&
+ (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) &&
+ !(nor->info->flags & SPI_NOR_4B_OPCODES))
+ set_4byte(nor, nor->info, 1);
+
return 0;
}
+/* mtd resume handler */
+static void spi_nor_resume(struct mtd_info *mtd)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ struct device *dev = nor->dev;
+ int ret;
+
+ /* re-initialize the nor chip */
+ ret = spi_nor_init(nor);
+ if (ret)
+ dev_err(dev, "resume() failed\n");
+}
+
int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct spi_nor_hwcaps *hwcaps)
{
@@ -2708,20 +2780,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- /*
- * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
- * with the software protection bits set
- */
-
- if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
- JEDEC_MFR(info) == SNOR_MFR_INTEL ||
- JEDEC_MFR(info) == SNOR_MFR_SST ||
- info->flags & SPI_NOR_HAS_LOCK) {
- write_enable(nor);
- write_sr(nor, 0);
- spi_nor_wait_till_ready(nor);
- }
-
if (!mtd->name)
mtd->name = dev_name(dev);
mtd->priv = nor;
@@ -2731,6 +2789,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
mtd->size = params.size;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
+ mtd->_resume = spi_nor_resume;
/* NOR protection support for STmicro/Micron chips and similar */
if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
@@ -2804,8 +2863,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
info->flags & SPI_NOR_4B_OPCODES)
spi_nor_set_4byte_opcodes(nor, info);
- else
- set_4byte(nor, info, 1);
} else {
nor->addr_width = 3;
}
@@ -2822,6 +2879,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
return ret;
}
+ /* Send all the required SPI flash commands to initialize device */
+ nor->info = info;
+ ret = spi_nor_init(nor);
+ if (ret)
+ return ret;
+
dev_info(dev, "%s (%lld Kbytes)\n", info->name,
(long long)mtd->size >> 10);
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c
index 86c0931543c5..b3c7f6addba7 100644
--- a/drivers/mtd/spi-nor/stm32-quadspi.c
+++ b/drivers/mtd/spi-nor/stm32-quadspi.c
@@ -1,9 +1,22 @@
/*
- * stm32_quadspi.c
+ * Driver for stm32 quadspi controller
*
- * Copyright (C) 2017, Ludovic Barre
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Ludovic Barre author <ludovic.barre@st.com>.
*
- * License terms: GNU General Public License (GPL), version 2
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * This program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/errno.h>
@@ -113,6 +126,7 @@
#define STM32_MAX_MMAP_SZ SZ_256M
#define STM32_MAX_NORCHIP 2
+#define STM32_QSPI_FIFO_SZ 32
#define STM32_QSPI_FIFO_TIMEOUT_US 30000
#define STM32_QSPI_BUSY_TIMEOUT_US 100000
@@ -124,6 +138,7 @@ struct stm32_qspi_flash {
u32 presc;
u32 read_mode;
bool registered;
+ u32 prefetch_limit;
};
struct stm32_qspi {
@@ -240,12 +255,12 @@ static int stm32_qspi_tx_poll(struct stm32_qspi *qspi,
STM32_QSPI_FIFO_TIMEOUT_US);
if (ret) {
dev_err(qspi->dev, "fifo timeout (stat:%#x)\n", sr);
- break;
+ return ret;
}
tx_fifo(buf++, qspi->io_base + QUADSPI_DR);
}
- return ret;
+ return 0;
}
static int stm32_qspi_tx_mm(struct stm32_qspi *qspi,
@@ -272,6 +287,7 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash,
{
struct stm32_qspi *qspi = flash->qspi;
u32 ccr, dcr, cr;
+ u32 last_byte;
int err;
err = stm32_qspi_wait_nobusy(qspi);
@@ -314,6 +330,10 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash,
if (err)
goto abort;
writel_relaxed(FCR_CTCF, qspi->io_base + QUADSPI_FCR);
+ } else {
+ last_byte = cmd->addr + cmd->len;
+ if (last_byte > flash->prefetch_limit)
+ goto abort;
}
return err;
@@ -322,7 +342,9 @@ abort:
cr = readl_relaxed(qspi->io_base + QUADSPI_CR) | CR_ABORT;
writel_relaxed(cr, qspi->io_base + QUADSPI_CR);
- dev_err(qspi->dev, "%s abort err:%d\n", __func__, err);
+ if (err)
+ dev_err(qspi->dev, "%s abort err:%d\n", __func__, err);
+
return err;
}
@@ -550,6 +572,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi,
}
flash->fsize = FSIZE_VAL(mtd->size);
+ flash->prefetch_limit = mtd->size - STM32_QSPI_FIFO_SZ;
flash->read_mode = CCR_FMODE_MM;
if (mtd->size > qspi->mm_size)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 6cd0f6b7658b..cd55bf14ad51 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -267,7 +267,7 @@ struct mtd_info {
*/
unsigned int bitflip_threshold;
- // Kernel-only stuff starts here.
+ /* Kernel-only stuff starts here. */
const char *name;
int index;
@@ -297,10 +297,6 @@ struct mtd_info {
int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, void **virt, resource_size_t *phys);
int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
- unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
- unsigned long len,
- unsigned long offset,
- unsigned long flags);
int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf);
int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
diff --git a/include/linux/mtd/nand-gpio.h b/include/linux/mtd/nand-gpio.h
index fdef72d6e198..7ab51bc4a380 100644
--- a/include/linux/mtd/nand-gpio.h
+++ b/include/linux/mtd/nand-gpio.h
@@ -5,11 +5,6 @@
#include <linux/mtd/rawnand.h>
struct gpio_nand_platdata {
- int gpio_nce;
- int gpio_nwp;
- int gpio_cle;
- int gpio_ale;
- int gpio_rdy;
void (*adjust_parts)(struct gpio_nand_platdata *, size_t);
struct mtd_partition *parts;
unsigned int num_parts;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 2b05f4273bab..749bb08c4772 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -177,6 +177,9 @@ enum nand_ecc_algo {
*/
#define NAND_NEED_SCRAMBLING 0x00002000
+/* Device needs 3rd row address cycle */
+#define NAND_ROW_ADDR_3 0x00004000
+
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 1f0a7fc7772f..d0c66a0975cf 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -232,10 +232,17 @@ enum spi_nor_option_flags {
};
/**
+ * struct flash_info - Forward declaration of a structure used internally by
+ * spi_nor_scan()
+ */
+struct flash_info;
+
+/**
* struct spi_nor - Structure for defining a the SPI NOR layer
* @mtd: point to a mtd_info structure
* @lock: the lock for the read/write/erase/lock/unlock operations
* @dev: point to a spi device, or a spi nor controller device.
+ * @info: spi-nor part JDEC MFR id and other info
* @page_size: the page size of the SPI NOR
* @addr_width: number of address bytes
* @erase_opcode: the opcode for erasing a sector
@@ -262,6 +269,7 @@ enum spi_nor_option_flags {
* @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR
* @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
* @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
+ * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
* completely locked
* @priv: the private data
*/
@@ -269,6 +277,7 @@ struct spi_nor {
struct mtd_info mtd;
struct mutex lock;
struct device *dev;
+ const struct flash_info *info;
u32 page_size;
u8 addr_width;
u8 erase_opcode;
@@ -296,6 +305,7 @@ struct spi_nor {
int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+ int (*quad_enable)(struct spi_nor *nor);
void *priv;
};
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 25e267f1970c..619df2431e75 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -64,21 +64,4 @@ struct gpmc_nand_regs {
void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
};
-
-struct omap_nand_platform_data {
- int cs;
- struct mtd_partition *parts;
- int nr_parts;
- bool flash_bbt;
- enum nand_io xfer_type;
- int devsize;
- enum omap_ecc ecc_opt;
-
- struct device_node *elm_of_node;
-
- /* deprecated */
- struct gpmc_nand_regs reg;
- struct device_node *of_node;
- bool dev_ready;
-};
#endif
diff --git a/lib/Kconfig b/lib/Kconfig
index 368972f0db78..c5e84fbcb30b 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_IOMAP
bool
select GENERIC_PCI_IOMAP
-config GENERIC_IO
- bool
- default n
-
config STMP_DEVICE
bool