diff options
26 files changed, 682 insertions, 110 deletions
diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt new file mode 100644 index 000000000000..0d244b999d10 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt @@ -0,0 +1,16 @@ +* Marvell Feroceon Cache + +Required properties: +- compatible : Should be either "marvell,feroceon-cache" or + "marvell,kirkwood-cache". + +Optional properties: +- reg : Address of the L2 cache control register. Mandatory for + "marvell,kirkwood-cache", not used by "marvell,feroceon-cache" + + +Example: + l2: l2-cache@20128 { + compatible = "marvell,kirkwood-cache"; + reg = <0x20128 0x4>; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4f13bf3d1870..ae5d6152d977 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -898,7 +898,7 @@ config ARCH_MULTI_V5 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" depends on !ARCH_MULTI_V6_V7 select ARCH_MULTI_V4_V5 - select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \ + select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4a89023f55ab..87c99d3cfa39 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -82,8 +82,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb -dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ +kirkwood := \ + kirkwood-cloudbox.dtb \ kirkwood-db-88f6281.dtb \ kirkwood-db-88f6282.dtb \ kirkwood-dns320.dtb \ @@ -117,6 +117,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb +dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) +dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index dc86429756d7..2cb0dc529165 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -122,4 +122,66 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0>; + dsa,mii-bus = <ðphy0>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@ff { + reg = <0xff>; /* No phy attached */ + speed = <1000>; + duplex = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; }; diff --git a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h index 06f982d55697..12e1588dc4f1 100644 --- a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h +++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h + * arch/arm/include/asm/hardware/cache-feroceon-l2.h * * Copyright (C) 2008 Marvell Semiconductor * @@ -9,3 +9,5 @@ */ extern void __init feroceon_l2_init(int l2_wt_override); +extern int __init feroceon_of_init(void); + diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index fe8319ad3158..df4b26340ae4 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -106,13 +106,6 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_MV88F6281GTW_GE_DT - bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)" - depends on ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell 88F6281 GTW GE Board (Flattened Device Tree). - endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 144b51102939..3a72c5c6e747 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,5 +1,4 @@ -obj-y += common.o pcie.o -obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o +obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o @@ -13,4 +12,3 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 78188159484d..2801da49e2a3 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -19,11 +19,84 @@ #include <linux/of_platform.h> #include <linux/dma-mapping.h> #include <linux/irqchip.h> -#include <linux/kexec.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <mach/bridge-regs.h> #include <plat/common.h> -#include "common.h" +#include <plat/pcie.h> +#include "pm.h" + +static struct map_desc kirkwood_io_desc[] __initdata = { + { + .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), + .length = KIRKWOOD_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init kirkwood_map_io(void) +{ + iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); +} + +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +static void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +static void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} + +/* Temporary here since mach-mvebu has a function we can use */ +static void kirkwood_restart(enum reboot_mode mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} #define MV643XX_ETH_MAC_ADDR_LOW 0x0414 #define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 @@ -104,35 +177,35 @@ eth_fixup_skip: } } -static void __init kirkwood_dt_init(void) +/* + * Disable propagation of mbus errors to the CPU local bus, as this + * causes mbus errors (which can occur for example for PCI aborts) to + * throw CPU aborts, which we're not set up to deal with. + */ +static void __init kirkwood_disable_mbus_error_propagation(void) { - pr_info("Kirkwood: %s.\n", kirkwood_id()); + void __iomem *cpu_config; - /* - * Disable propagation of mbus errors to the CPU local bus, - * as this causes mbus errors (which can occur for example - * for PCI aborts) to throw CPU aborts, which we're not set - * up to deal with. - */ - writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + cpu_config = ioremap(CPU_CONFIG_PHYS, 4); + writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); + iounmap(cpu_config); +} - BUG_ON(mvebu_mbus_dt_init()); +static void __init kirkwood_dt_init(void) +{ + kirkwood_disable_mbus_error_propagation(); - kirkwood_l2_init(); + BUG_ON(mvebu_mbus_dt_init()); +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif kirkwood_cpufreq_init(); kirkwood_cpuidle_init(); kirkwood_pm_init(); kirkwood_dt_eth_fixup(); -#ifdef CONFIG_KEXEC - kexec_reinit = kirkwood_enable_pcie; -#endif - - if (of_machine_is_compatible("marvell,mv88f6281gtw-ge")) - mv88f6281gtw_ge_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c deleted file mode 100644 index ee5eea678c11..000000000000 --- a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c - * - * Marvell 88F6281 GTW GE Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/timer.h> -#include <linux/mv643xx_eth.h> -#include <linux/ethtool.h> -#include <linux/gpio.h> -#include <net/dsa.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/kirkwood.h> -#include "common.h" - -static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[4] = "wan", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { - .nr_chips = 1, - .chip = &mv88f6281gtw_ge_switch_chip_data, -}; - -void __init mv88f6281gtw_ge_init(void) -{ - kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); - kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f3407a5db216..255f33a3903c 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -25,10 +25,10 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <mach/kirkwood.h> #include <mach/bridge-regs.h> #include <linux/platform_data/asoc-kirkwood.h> -#include <plat/cache-feroceon-l2.h> #include <linux/platform_data/mmc-mvsdio.h> #include <linux/platform_data/mtd-orion_nand.h> #include <linux/platform_data/usb-ehci-orion.h> @@ -36,6 +36,7 @@ #include <plat/time.h> #include <linux/platform_data/dma-mv_xor.h> #include "common.h" +#include "pm.h" /* These can go away once Kirkwood uses the mvebu-mbus DT binding */ #define KIRKWOOD_MBUS_NAND_TARGET 0x01 diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 05fd648df543..832a4e2ab8d7 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,19 +58,6 @@ void kirkwood_cpufreq_init(void); void kirkwood_restart(enum reboot_mode, const char *); void kirkwood_clk_init(void); -#ifdef CONFIG_PM -void kirkwood_pm_init(void); -#else -static inline void kirkwood_pm_init(void) {}; -#endif - -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT -void mv88f6281gtw_ge_init(void); -#else -static inline void mv88f6281gtw_ge_init(void) {}; -#endif - /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 8b9d1c9ff199..6e5077e2ec26 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -14,6 +14,7 @@ #include <mach/kirkwood.h> #define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) #define CPU_CONFIG_ERROR_PROP 0x00000004 #define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) @@ -79,5 +80,6 @@ #define CGC_RESERVED (0x6 << 21) #define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118) #endif diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c index c6ab8d9303a5..8e5e0329d04c 100644 --- a/arch/arm/mach-kirkwood/pm.c +++ b/arch/arm/mach-kirkwood/pm.c @@ -21,15 +21,16 @@ #include "common.h" static void __iomem *ddr_operation_base; +static void __iomem *memory_pm_ctrl; static void kirkwood_low_power(void) { u32 mem_pm_ctrl; - mem_pm_ctrl = readl(MEMORY_PM_CTRL); + mem_pm_ctrl = readl(memory_pm_ctrl); /* Set peripherals to low-power mode */ - writel_relaxed(~0, MEMORY_PM_CTRL); + writel_relaxed(~0, memory_pm_ctrl); /* Set DDR in self-refresh */ writel_relaxed(0x7, ddr_operation_base); @@ -41,7 +42,7 @@ static void kirkwood_low_power(void) */ cpu_do_idle(); - writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL); + writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); } static int kirkwood_suspend_enter(suspend_state_t state) @@ -69,5 +70,7 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = { void __init kirkwood_pm_init(void) { ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); + suspend_set_ops(&kirkwood_suspend_ops); } diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h new file mode 100644 index 000000000000..21e7530f368b --- /dev/null +++ b/arch/arm/mach-kirkwood/pm.h @@ -0,0 +1,26 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_KIRKWOOD_PM_H +#define __ARCH_KIRKWOOD_PM_H + +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 75062eff2494..e6ac679bece9 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -15,11 +15,11 @@ #include <linux/ata_platform.h> #include <linux/clk-provider.h> #include <linux/ethtool.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/mv78xx0.h> #include <mach/bridge-regs.h> -#include <plat/cache-feroceon-l2.h> #include <linux/platform_data/usb-ehci-orion.h> #include <linux/platform_data/mtd-orion_nand.h> #include <plat/time.h> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index f961ae4ec4ee..dd35de74efab 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,5 +1,5 @@ config ARCH_MVEBU - bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 + bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select GENERIC_IRQ_CHIP @@ -14,7 +14,7 @@ config ARCH_MVEBU if ARCH_MVEBU -menu "Marvell SOC with device tree" +menu "Marvell EBU SoC variants" config MACH_MVEBU_V7 bool @@ -22,7 +22,7 @@ config MACH_MVEBU_V7 select CACHE_L2X0 config MACH_ARMADA_370 - bool "Marvell Armada 370 boards" + bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 select ARMADA_370_CLK select CPU_PJ4B select MACH_MVEBU_V7 @@ -32,7 +32,7 @@ config MACH_ARMADA_370 on the Marvell Armada 370 SoC with device tree. config MACH_ARMADA_375 - bool "Marvell Armada 375 boards" + bool "Marvell Armada 375 boards" if ARCH_MULTI_V7 select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC @@ -46,7 +46,7 @@ config MACH_ARMADA_375 on the Marvell Armada 375 SoC with device tree. config MACH_ARMADA_38X - bool "Marvell Armada 380/385 boards" + bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7 select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC @@ -60,7 +60,7 @@ config MACH_ARMADA_38X on the Marvell Armada 380/385 SoC with device tree. config MACH_ARMADA_XP - bool "Marvell Armada XP boards" + bool "Marvell Armada XP boards" if ARCH_MULTI_V7 select ARMADA_XP_CLK select CPU_PJ4B select MACH_MVEBU_V7 @@ -69,6 +69,30 @@ config MACH_ARMADA_XP Say 'Y' here if you want your kernel to support boards based on the Marvell Armada XP SoC with device tree. +config MACH_KIRKWOOD + bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select KIRKWOOD_CLK + select OF_IRQ + select ORION_IRQCHIP + select ORION_TIMER + select PCI + select PCI_QUIRKS + select PINCTRL_KIRKWOOD + select USE_OF + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Kirkwood device tree. + +config MACH_T5325 + bool "HP T5325 thin client" + depends on MACH_KIRKWOOD + help + Say 'Y' here if you want your kernel to support the + HP T5325 Thin client + endmenu endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 2c1db29db2ca..bbeb41ee3e75 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -8,3 +8,5 @@ obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o +obj-$(CONFIG_MACH_T5325) += board-t5325.o diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c new file mode 100644 index 000000000000..65ace6db9f28 --- /dev/null +++ b/arch/arm/mach-mvebu/board-t5325.c @@ -0,0 +1,41 @@ +/* + * HP T5325 Board Setup + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <sound/alc5623.h> +#include "board.h" + +static struct platform_device hp_t5325_audio_device = { + .name = "t5325-audio", + .id = -1, +}; + +static struct alc5623_platform_data alc5621_data = { + .add_ctrl = 0x3700, + .jack_det_ctrl = 0x4810, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("alc5621", 0x1a), + .platform_data = &alc5621_data, + }, +}; + +void __init t5325_init(void) +{ + i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); + platform_device_register(&hp_t5325_audio_device); +} diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h new file mode 100644 index 000000000000..de7f0a191394 --- /dev/null +++ b/arch/arm/mach-mvebu/board.h @@ -0,0 +1,22 @@ +/* + * Board functions for Marvell System On Chip + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_MVEBU_BOARD_H +#define __ARCH_MVEBU_BOARD_H + +#ifdef CONFIG_MACH_T5325 +void t5325_init(void); +#else +static inline void t5325_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c new file mode 100644 index 000000000000..cbb816f2120c --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -0,0 +1,76 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include "kirkwood.h" + +static void __iomem *ddr_operation_base; +static void __iomem *memory_pm_ctrl; + +static void kirkwood_low_power(void) +{ + u32 mem_pm_ctrl; + + mem_pm_ctrl = readl(memory_pm_ctrl); + + /* Set peripherals to low-power mode */ + writel_relaxed(~0, memory_pm_ctrl); + + /* Set DDR in self-refresh */ + writel_relaxed(0x7, ddr_operation_base); + + /* + * Set CPU in wait-for-interrupt state. + * This disables the CPU core clocks, + * the array clocks, and also the L2 controller. + */ + cpu_do_idle(); + + writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); +} + +static int kirkwood_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + kirkwood_low_power(); + break; + default: + return -EINVAL; + } + return 0; +} + +static int kirkwood_pm_valid_standby(suspend_state_t state) +{ + return state == PM_SUSPEND_STANDBY; +} + +static const struct platform_suspend_ops kirkwood_suspend_ops = { + .enter = kirkwood_suspend_enter, + .valid = kirkwood_pm_valid_standby, +}; + +int __init kirkwood_pm_init(void) +{ + ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); + + suspend_set_ops(&kirkwood_suspend_ops); + return 0; +} diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h new file mode 100644 index 000000000000..21e7530f368b --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.h @@ -0,0 +1,26 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_KIRKWOOD_PM_H +#define __ARCH_KIRKWOOD_PM_H + +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c new file mode 100644 index 000000000000..120207fc36f1 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -0,0 +1,199 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-mvebu/kirkwood.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_net.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <asm/hardware/cache-feroceon-l2.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include "kirkwood.h" +#include "kirkwood-pm.h" +#include "common.h" +#include "board.h" + +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +static void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +static void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} + +#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 +#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 + +static void __init kirkwood_dt_eth_fixup(void) +{ + struct device_node *np; + + /* + * The ethernet interfaces forget the MAC address assigned by u-boot + * if the clocks are turned off. Usually, u-boot on kirkwood boards + * has no DT support to properly set local-mac-address property. + * As a workaround, we get the MAC address from mv643xx_eth registers + * and update the port device node if no valid MAC address is set. + */ + for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { + struct device_node *pnp = of_get_parent(np); + struct clk *clk; + struct property *pmac; + void __iomem *io; + u8 *macaddr; + u32 reg; + + if (!pnp) + continue; + + /* skip disabled nodes or nodes with valid MAC address*/ + if (!of_device_is_available(pnp) || of_get_mac_address(np)) + goto eth_fixup_skip; + + clk = of_clk_get(pnp, 0); + if (IS_ERR(clk)) + goto eth_fixup_skip; + + io = of_iomap(pnp, 0); + if (!io) + goto eth_fixup_no_map; + + /* ensure port clock is not gated to not hang CPU */ + clk_prepare_enable(clk); + + /* store MAC address register contents in local-mac-address */ + pr_err(FW_INFO "%s: local-mac-address is not set\n", + np->full_name); + + pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); + if (!pmac) + goto eth_fixup_no_mem; + + pmac->value = pmac + 1; + pmac->length = 6; + pmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (!pmac->name) { + kfree(pmac); + goto eth_fixup_no_mem; + } + + macaddr = pmac->value; + reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); + macaddr[0] = (reg >> 24) & 0xff; + macaddr[1] = (reg >> 16) & 0xff; + macaddr[2] = (reg >> 8) & 0xff; + macaddr[3] = reg & 0xff; + + reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); + macaddr[4] = (reg >> 8) & 0xff; + macaddr[5] = reg & 0xff; + + of_update_property(np, pmac); + +eth_fixup_no_mem: + iounmap(io); + clk_disable_unprepare(clk); +eth_fixup_no_map: + clk_put(clk); +eth_fixup_skip: + of_node_put(pnp); + } +} + +/* + * Disable propagation of mbus errors to the CPU local bus, as this + * causes mbus errors (which can occur for example for PCI aborts) to + * throw CPU aborts, which we're not set up to deal with. + */ +void kirkwood_disable_mbus_error_propagation(void) +{ + void __iomem *cpu_config; + + cpu_config = ioremap(CPU_CONFIG_PHYS, 4); + writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); +} + +static struct of_dev_auxdata auxdata[] __initdata = { + OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000, + "mvebu-audio", NULL), + { /* sentinel */ } +}; + +static void __init kirkwood_dt_init(void) +{ + kirkwood_disable_mbus_error_propagation(); + + BUG_ON(mvebu_mbus_dt_init()); + +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif + kirkwood_cpufreq_init(); + kirkwood_cpuidle_init(); + + kirkwood_pm_init(); + kirkwood_dt_eth_fixup(); + + if (of_machine_is_compatible("hp,t5325")) + t5325_init(); + + of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); +} + +static const char * const kirkwood_dt_board_compat[] = { + "marvell,kirkwood", + NULL +}; + +DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") + /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ + .init_machine = kirkwood_dt_init, + .restart = mvebu_restart, + .dt_compat = kirkwood_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h new file mode 100644 index 000000000000..89f3d1f51643 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-mvebu/kirkwood.h + * + * Generic definitions for Marvell Kirkwood SoC flavors: + * 88F6180, 88F6192 and 88F6281. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) + +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + +#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118) diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index f3b325f6cbd4..f3d4cf53f746 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -38,6 +38,7 @@ static bool is_id_valid; static const struct of_device_id mvebu_pcie_of_match_table[] = { { .compatible = "marvell,armada-xp-pcie", }, { .compatible = "marvell,armada-370-pcie", }, + { .compatible = "marvell,kirkwood-pcie" }, {}, }; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1f8fed94c2a4..dccd7e177653 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -855,7 +855,7 @@ config OUTER_CACHE_SYNC config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" - depends on ARCH_KIRKWOOD || ARCH_MV78XX0 + depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU default y select OUTER_CACHE help diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 48bc3c0a87ce..8dc1a2b5a8ed 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -13,10 +13,15 @@ */ #include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/highmem.h> +#include <linux/io.h> #include <asm/cacheflush.h> #include <asm/cp15.h> -#include <plat/cache-feroceon-l2.h> +#include <asm/hardware/cache-feroceon-l2.h> + +#define L2_WRITETHROUGH_KIRKWOOD BIT(4) /* * Low-level cache maintenance operations. @@ -350,3 +355,41 @@ void __init feroceon_l2_init(int __l2_wt_override) printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n", l2_wt_override ? ", in WT override mode" : ""); } +#ifdef CONFIG_OF +static const struct of_device_id feroceon_ids[] __initconst = { + { .compatible = "marvell,kirkwood-cache"}, + { .compatible = "marvell,feroceon-cache"}, + {} +}; + +int __init feroceon_of_init(void) +{ + struct device_node *node; + void __iomem *base; + bool l2_wt_override = false; + struct resource res; + +#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) + l2_wt_override = true; +#endif + + node = of_find_matching_node(NULL, feroceon_ids); + if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) { + if (of_address_to_resource(node, 0, &res)) + return -ENODEV; + + base = ioremap(res.start, resource_size(&res)); + if (!base) + return -ENOMEM; + + if (l2_wt_override) + writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base); + else + writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base); + } + + feroceon_l2_init(l2_wt_override); + + return 0; +} +#endif |