summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt7
-rw-r--r--Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt33
-rw-r--r--Documentation/devicetree/bindings/spi/spi-bcm63xx.txt33
-rw-r--r--Documentation/devicetree/bindings/spi/spi_pl022.txt8
-rw-r--r--drivers/acpi/acpi_apd.c1
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/spi/spi-atmel.c44
-rw-r--r--drivers/spi/spi-bcm63xx-hsspi.c35
-rw-r--r--drivers/spi/spi-bcm63xx.c51
-rw-r--r--drivers/spi/spi-cadence.c65
-rw-r--r--drivers/spi/spi-davinci.c95
-rw-r--r--drivers/spi/spi-dw-mmio.c2
-rw-r--r--drivers/spi/spi-fsl-dspi.c3
-rw-r--r--drivers/spi/spi-fsl-spi.c3
-rw-r--r--drivers/spi/spi-imx.c20
-rw-r--r--drivers/spi/spi-lantiq-ssc.c438
-rw-r--r--drivers/spi/spi-loopback-test.c154
-rw-r--r--drivers/spi/spi-omap2-mcspi.c9
-rw-r--r--drivers/spi/spi-orion.c11
-rw-r--r--drivers/spi/spi-pl022.c2
-rw-r--r--drivers/spi/spi-sc18is602.c24
-rw-r--r--drivers/spi/spi-sun6i.c94
-rw-r--r--drivers/spi/spi-tegra114.c2
-rw-r--r--drivers/spi/spi-tegra20-sflash.c2
-rw-r--r--drivers/spi/spi-tegra20-slink.c2
-rw-r--r--drivers/spi/spi-test.h21
-rw-r--r--drivers/spi/spi-ti-qspi.c70
-rw-r--r--drivers/spi/spi-xlp.c1
-rw-r--r--drivers/spi/spi.c38
-rw-r--r--drivers/spi/spidev.c1
-rw-r--r--include/linux/spi/spi.h10
-rw-r--r--tools/spi/spidev_test.c93
32 files changed, 964 insertions, 410 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 8bc95e2fc47f..31b5b21598ff 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -23,6 +23,12 @@ See the clock consumer binding,
Obsolete properties:
- fsl,spi-num-chipselects : Contains the number of the chipselect
+Optional properties:
+- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
+controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
+the SPI_READY mode-flag needs to be set too.
+Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+
Example:
ecspi@70010000 {
@@ -35,4 +41,5 @@ ecspi@70010000 {
<&gpio3 25 0>; /* GPIO3_25 */
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
dma-names = "rx", "tx";
+ fsl,spi-rdy-drctl = <1>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
new file mode 100644
index 000000000000..37b29ee13860
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6328 High Speed SPI controller
+
+Required properties:
+- compatible: must contain of "brcm,bcm6328-hsspi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandles of the SPI clock and the PLL clock.
+- clock-names: must be "hsspi", "pll".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+ if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@10001000 {
+ compatible = "brcm,bcm6328-hsspi";
+ reg = <0x10001000 0x600>;
+
+ interrupts = <29>;
+
+ clocks = <&clkctl 9>, <&hsspi_pll>;
+ clock-names = "hsspi", "pll";
+
+ num-cs = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
new file mode 100644
index 000000000000..1c16f6692613
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6348/BCM6358 SPI controller
+
+Required properties:
+- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandle of the SPI clock.
+- clock-names: has to be "spi".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+ if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@10000800 {
+ compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
+ reg = <0x10000800 0x70c>;
+
+ interrupts = <1>;
+
+ clocks = <&clkctl 9>;
+ clock-names = "spi";
+
+ num-cs = <5>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
index 4d1673ca8cf8..7638b4968ddb 100644
--- a/Documentation/devicetree/bindings/spi/spi_pl022.txt
+++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt
@@ -30,7 +30,10 @@ contain the following properties.
0: SPI
1: Texas Instruments Synchronous Serial Frame Format
2: Microwire (Half Duplex)
-- pl022,com-mode : polling, interrupt or dma
+- pl022,com-mode : specifies the transfer mode:
+ 0: interrupt mode
+ 1: polling mode (default mode if property not present)
+ 2: DMA mode
- pl022,rx-level-trig : Rx FIFO watermark level
- pl022,tx-level-trig : Tx FIFO watermark level
- pl022,ctrl-len : Microwire interface: Control length
@@ -56,9 +59,7 @@ Example:
spi-max-frequency = <12000000>;
spi-cpol;
spi-cpha;
- pl022,hierarchy = <0>;
pl022,interface = <0>;
- pl022,slave-tx-disable;
pl022,com-mode = <0x2>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
@@ -67,4 +68,3 @@ Example:
pl022,duplex = <0>;
};
};
-
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 26696b693e63..17a1eb14847a 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -169,6 +169,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
#ifdef CONFIG_ARM64
{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
+ { "CAV900D", APD_ADDR(vulcan_spi_desc) },
#endif
{ }
};
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 25ae7f2e44b5..1761c9004fc1 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -715,7 +715,7 @@ config SPI_XILINX
config SPI_XLP
tristate "Netlogic XLP SPI controller driver"
- depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST
+ depends on CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST
help
Enable support for the SPI controller on the Netlogic XLP SoCs.
Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 0e7712bac3b6..1eb83c9613d5 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1464,6 +1464,25 @@ static int atmel_spi_gpio_cs(struct platform_device *pdev)
return 0;
}
+static void atmel_spi_init(struct atmel_spi *as)
+{
+ spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
+ if (as->caps.has_wdrbt) {
+ spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
+ | SPI_BIT(MSTR));
+ } else {
+ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
+ }
+
+ if (as->use_pdc)
+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+ spi_writel(as, CR, SPI_BIT(SPIEN));
+
+ if (as->fifo_size)
+ spi_writel(as, CR, SPI_BIT(FIFOEN));
+}
+
static int atmel_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
@@ -1572,26 +1591,14 @@ static int atmel_spi_probe(struct platform_device *pdev)
as->spi_clk = clk_get_rate(clk);
- spi_writel(as, CR, SPI_BIT(SWRST));
- spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
- if (as->caps.has_wdrbt) {
- spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
- | SPI_BIT(MSTR));
- } else {
- spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
- }
-
- if (as->use_pdc)
- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
- spi_writel(as, CR, SPI_BIT(SPIEN));
-
as->fifo_size = 0;
if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
&as->fifo_size)) {
dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size);
- spi_writel(as, CR, SPI_BIT(FIFOEN));
}
+ atmel_spi_init(as);
+
pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
@@ -1695,8 +1702,17 @@ static int atmel_spi_suspend(struct device *dev)
static int atmel_spi_resume(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
+ struct atmel_spi *as = spi_master_get_devdata(master);
int ret;
+ ret = clk_prepare_enable(as->clk);
+ if (ret)
+ return ret;
+
+ atmel_spi_init(as);
+
+ clk_disable_unprepare(as->clk);
+
if (!pm_runtime_suspended(dev)) {
ret = atmel_spi_runtime_resume(dev);
if (ret)
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 55789f7cda92..5514cd02e93a 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/mutex.h>
+#include <linux/of.h>
#define HSSPI_GLOBAL_CTRL_REG 0x0
#define GLOBAL_CTRL_CS_POLARITY_SHIFT 0
@@ -91,6 +92,7 @@
#define HSSPI_MAX_SYNC_CLOCK 30000000
+#define HSSPI_SPI_MAX_CS 8
#define HSSPI_BUS_NUM 1 /* 0 is legacy SPI */
struct bcm63xx_hsspi {
@@ -332,7 +334,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct clk *clk;
int irq, ret;
- u32 reg, rate;
+ u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -351,8 +353,16 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
return PTR_ERR(clk);
rate = clk_get_rate(clk);
- if (!rate)
- return -EINVAL;
+ if (!rate) {
+ struct clk *pll_clk = devm_clk_get(dev, "pll");
+
+ if (IS_ERR(pll_clk))
+ return PTR_ERR(pll_clk);
+
+ rate = clk_get_rate(pll_clk);
+ if (!rate)
+ return -EINVAL;
+ }
ret = clk_prepare_enable(clk);
if (ret)
@@ -374,8 +384,17 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
mutex_init(&bs->bus_mutex);
init_completion(&bs->done);
- master->bus_num = HSSPI_BUS_NUM;
- master->num_chipselect = 8;
+ master->dev.of_node = dev->of_node;
+ if (!dev->of_node)
+ master->bus_num = HSSPI_BUS_NUM;
+
+ of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+ if (num_cs > 8) {
+ dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
+ num_cs);
+ num_cs = HSSPI_SPI_MAX_CS;
+ }
+ master->num_chipselect = num_cs;
master->setup = bcm63xx_hsspi_setup;
master->transfer_one_message = bcm63xx_hsspi_transfer_one;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
@@ -461,10 +480,16 @@ static int bcm63xx_hsspi_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(bcm63xx_hsspi_pm_ops, bcm63xx_hsspi_suspend,
bcm63xx_hsspi_resume);
+static const struct of_device_id bcm63xx_hsspi_of_match[] = {
+ { .compatible = "brcm,bcm6328-hsspi", },
+ { },
+};
+
static struct platform_driver bcm63xx_hsspi_driver = {
.driver = {
.name = "bcm63xx-hsspi",
.pm = &bcm63xx_hsspi_pm_ops,
+ .of_match_table = bcm63xx_hsspi_of_match,
},
.probe = bcm63xx_hsspi_probe,
.remove = bcm63xx_hsspi_remove,
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index fee747030ee6..247f71b02235 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -26,6 +26,7 @@
#include <linux/completion.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
/* BCM 6338/6348 SPI core */
#define SPI_6348_RSET_SIZE 64
@@ -428,6 +429,13 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static size_t bcm63xx_spi_max_length(struct spi_device *spi)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+
+ return bs->fifo_size;
+}
+
static const unsigned long bcm6348_spi_reg_offsets[] = {
[SPI_CMD] = SPI_6348_CMD,
[SPI_INT_STATUS] = SPI_6348_INT_STATUS,
@@ -477,21 +485,48 @@ static const struct platform_device_id bcm63xx_spi_dev_match[] = {
},
};
+static const struct of_device_id bcm63xx_spi_of_match[] = {
+ { .compatible = "brcm,bcm6348-spi", .data = &bcm6348_spi_reg_offsets },
+ { .compatible = "brcm,bcm6358-spi", .data = &bcm6358_spi_reg_offsets },
+ { },
+};
+
static int bcm63xx_spi_probe(struct platform_device *pdev)
{
struct resource *r;
const unsigned long *bcm63xx_spireg;
struct device *dev = &pdev->dev;
- int irq;
+ int irq, bus_num;
struct spi_master *master;
struct clk *clk;
struct bcm63xx_spi *bs;
int ret;
+ u32 num_cs = BCM63XX_SPI_MAX_CS;
- if (!pdev->id_entry->driver_data)
- return -EINVAL;
+ if (dev->of_node) {
+ const struct of_device_id *match;
+
+ match = of_match_node(bcm63xx_spi_of_match, dev->of_node);
+ if (!match)
+ return -EINVAL;
+ bcm63xx_spireg = match->data;
+
+ of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+ if (num_cs > BCM63XX_SPI_MAX_CS) {
+ dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
+ num_cs);
+ num_cs = BCM63XX_SPI_MAX_CS;
+ }
- bcm63xx_spireg = (const unsigned long *)pdev->id_entry->driver_data;
+ bus_num = -1;
+ } else if (pdev->id_entry->driver_data) {
+ const struct platform_device_id *match = pdev->id_entry;
+
+ bcm63xx_spireg = (const unsigned long *)match->driver_data;
+ bus_num = BCM63XX_SPI_BUS_NUM;
+ } else {
+ return -EINVAL;
+ }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -536,11 +571,14 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
goto out_err;
}
- master->bus_num = BCM63XX_SPI_BUS_NUM;
- master->num_chipselect = BCM63XX_SPI_MAX_CS;
+ master->dev.of_node = dev->of_node;
+ master->bus_num = bus_num;
+ master->num_chipselect = num_cs;
master->transfer_one_message = bcm63xx_spi_transfer_one;
master->mode_bits = MODEBITS;
master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->max_transfer_size = bcm63xx_spi_max_length;
+ master->max_message_size = bcm63xx_spi_max_length;
master->auto_runtime_pm = true;
bs->msg_type_shift = bs->reg_offsets[SPI_MSG_TYPE_SHIFT];
bs->msg_ctl_width = bs->reg_offsets[SPI_MSG_CTL_WIDTH];
@@ -624,6 +662,7 @@ static struct platform_driver bcm63xx_spi_driver = {
.driver = {
.name = "bcm63xx-spi",
.pm = &bcm63xx_spi_pm_ops,
+ .of_match_table = bcm63xx_spi_of_match,
},
.id_table = bcm63xx_spi_dev_match,
.probe = bcm63xx_spi_probe,
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 1c57ce64abba..f0b5c7b91f37 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -127,6 +128,10 @@ struct cdns_spi {
u32 is_decoded_cs;
};
+struct cdns_spi_device_data {
+ bool gpio_requested;
+};
+
/* Macros for the SPI controller read/write */
static inline u32 cdns_spi_read(struct cdns_spi *xspi, u32 offset)
{
@@ -456,6 +461,64 @@ static int cdns_unprepare_transfer_hardware(struct spi_master *master)
return 0;
}
+static int cdns_spi_setup(struct spi_device *spi)
+{
+
+ int ret = -EINVAL;
+ struct cdns_spi_device_data *cdns_spi_data = spi_get_ctldata(spi);
+
+ /* this is a pin managed by the controller, leave it alone */
+ if (spi->cs_gpio == -ENOENT)
+ return 0;
+
+ /* this seems to be the first time we're here */
+ if (!cdns_spi_data) {
+ cdns_spi_data = kzalloc(sizeof(*cdns_spi_data), GFP_KERNEL);
+ if (!cdns_spi_data)
+ return -ENOMEM;
+ cdns_spi_data->gpio_requested = false;
+ spi_set_ctldata(spi, cdns_spi_data);
+ }
+
+ /* if we haven't done so, grab the gpio */
+ if (!cdns_spi_data->gpio_requested && gpio_is_valid(spi->cs_gpio)) {
+ ret = gpio_request_one(spi->cs_gpio,
+ (spi->mode & SPI_CS_HIGH) ?
+ GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
+ dev_name(&spi->dev));
+ if (ret)
+ dev_err(&spi->dev, "can't request chipselect gpio %d\n",
+ spi->cs_gpio);
+ else
+ cdns_spi_data->gpio_requested = true;
+ } else {
+ if (gpio_is_valid(spi->cs_gpio)) {
+ int mode = ((spi->mode & SPI_CS_HIGH) ?
+ GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH);
+
+ ret = gpio_direction_output(spi->cs_gpio, mode);
+ if (ret)
+ dev_err(&spi->dev, "chipselect gpio %d setup failed (%d)\n",
+ spi->cs_gpio, ret);
+ }
+ }
+
+ return ret;
+}
+
+static void cdns_spi_cleanup(struct spi_device *spi)
+{
+ struct cdns_spi_device_data *cdns_spi_data = spi_get_ctldata(spi);
+
+ if (cdns_spi_data) {
+ if (cdns_spi_data->gpio_requested)
+ gpio_free(spi->cs_gpio);
+ kfree(cdns_spi_data);
+ spi_set_ctldata(spi, NULL);
+ }
+
+}
+
/**
* cdns_spi_probe - Probe method for the SPI driver
* @pdev: Pointer to the platform_device structure
@@ -555,6 +618,8 @@ static int cdns_spi_probe(struct platform_device *pdev)
master->transfer_one = cdns_transfer_one;
master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware;
master->set_cs = cdns_spi_chipselect;
+ master->setup = cdns_spi_setup;
+ master->cleanup = cdns_spi_cleanup;
master->auto_runtime_pm = true;
master->mode_bits = SPI_CPOL | SPI_CPHA;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 02fb96797ac8..595acdcfc7d0 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -109,6 +109,8 @@
#define SPIDEF 0x4c
#define SPIFMT0 0x50
+#define DMA_MIN_BYTES 16
+
/* SPI Controller driver's private data. */
struct davinci_spi {
struct spi_bitbang bitbang;
@@ -389,6 +391,7 @@ static int davinci_spi_of_setup(struct spi_device *spi)
{
struct davinci_spi_config *spicfg = spi->controller_data;
struct device_node *np = spi->dev.of_node;
+ struct davinci_spi *dspi = spi_master_get_devdata(spi->master);
u32 prop;
if (spicfg == NULL && np) {
@@ -400,6 +403,9 @@ static int davinci_spi_of_setup(struct spi_device *spi)
if (!of_property_read_u32(np, "ti,spi-wdelay", &prop))
spicfg->wdelay = (u8)prop;
spi->controller_data = spicfg;
+
+ if (dspi->dma_rx && dspi->dma_tx)
+ spicfg->io_type = SPI_IO_TYPE_DMA;
}
return 0;
@@ -467,6 +473,22 @@ static void davinci_spi_cleanup(struct spi_device *spi)
kfree(spicfg);
}
+static bool davinci_spi_can_dma(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct davinci_spi_config *spicfg = spi->controller_data;
+ bool can_dma = false;
+
+ if (spicfg)
+ can_dma = (spicfg->io_type == SPI_IO_TYPE_DMA) &&
+ (xfer->len >= DMA_MIN_BYTES) &&
+ !is_vmalloc_addr(xfer->rx_buf) &&
+ !is_vmalloc_addr(xfer->tx_buf);
+
+ return can_dma;
+}
+
static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
{
struct device *sdev = dspi->bitbang.master->dev.parent;
@@ -581,8 +603,6 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
struct davinci_spi_config *spicfg;
struct davinci_spi_platform_data *pdata;
unsigned uninitialized_var(rx_buf_count);
- void *dummy_buf = NULL;
- struct scatterlist sg_rx, sg_tx;
dspi = spi_master_get_devdata(spi->master);
pdata = &dspi->pdata;
@@ -605,10 +625,9 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
reinit_completion(&dspi->done);
- if (spicfg->io_type == SPI_IO_TYPE_INTR)
- set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
-
- if (spicfg->io_type != SPI_IO_TYPE_DMA) {
+ if (!davinci_spi_can_dma(spi->master, spi, t)) {
+ if (spicfg->io_type != SPI_IO_TYPE_POLL)
+ set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
/* start the transfer */
dspi->wcount--;
tx_data = dspi->get_tx(dspi);
@@ -630,51 +649,28 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
};
struct dma_async_tx_descriptor *rxdesc;
struct dma_async_tx_descriptor *txdesc;
- void *buf;
-
- dummy_buf = kzalloc(t->len, GFP_KERNEL);
- if (!dummy_buf)
- goto err_alloc_dummy_buf;
dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf);
dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf);
- sg_init_table(&sg_rx, 1);
- if (!t->rx_buf)
- buf = dummy_buf;
- else
- buf = t->rx_buf;
- t->rx_dma = dma_map_single(&spi->dev, buf,
- t->len, DMA_FROM_DEVICE);
- if (dma_mapping_error(&spi->dev, !t->rx_dma)) {
- ret = -EFAULT;
- goto err_rx_map;
- }
- sg_dma_address(&sg_rx) = t->rx_dma;
- sg_dma_len(&sg_rx) = t->len;
-
- sg_init_table(&sg_tx, 1);
- if (!t->tx_buf)
- buf = dummy_buf;
- else
- buf = (void *)t->tx_buf;
- t->tx_dma = dma_map_single(&spi->dev, buf,
- t->len, DMA_TO_DEVICE);
- if (dma_mapping_error(&spi->dev, t->tx_dma)) {
- ret = -EFAULT;
- goto err_tx_map;
- }
- sg_dma_address(&sg_tx) = t->tx_dma;
- sg_dma_len(&sg_tx) = t->len;
-
rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx,
- &sg_rx, 1, DMA_DEV_TO_MEM,
+ t->rx_sg.sgl, t->rx_sg.nents, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!rxdesc)
goto err_desc;
+ if (!t->tx_buf) {
+ /* To avoid errors when doing rx-only transfers with
+ * many SG entries (> 20), use the rx buffer as the
+ * dummy tx buffer so that dma reloads are done at the
+ * same time for rx and tx.
+ */
+ t->tx_sg.sgl = t->rx_sg.sgl;
+ t->tx_sg.nents = t->rx_sg.nents;
+ }
+
txdesc = dmaengine_prep_slave_sg(dspi->dma_tx,
- &sg_tx, 1, DMA_MEM_TO_DEV,
+ t->tx_sg.sgl, t->tx_sg.nents, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!txdesc)
goto err_desc;
@@ -710,16 +706,9 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
}
clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
- if (spicfg->io_type == SPI_IO_TYPE_DMA) {
+ if (davinci_spi_can_dma(spi->master, spi, t))
clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
- dma_unmap_single(&spi->dev, t->rx_dma,
- t->len, DMA_FROM_DEVICE);
- dma_unmap_single(&spi->dev, t->tx_dma,
- t->len, DMA_TO_DEVICE);
- kfree(dummy_buf);
- }
-
clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
@@ -742,12 +731,6 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
return t->len;
err_desc:
- dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE);
-err_tx_map:
- dma_unmap_single(&spi->dev, t->rx_dma, t->len, DMA_FROM_DEVICE);
-err_rx_map:
- kfree(dummy_buf);
-err_alloc_dummy_buf:
return ret;
}
@@ -988,8 +971,10 @@ static int davinci_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
+ master->flags = SPI_MASTER_MUST_RX;
master->setup = davinci_spi_setup;
master->cleanup = davinci_spi_cleanup;
+ master->can_dma = davinci_spi_can_dma;
dspi->bitbang.chipselect = davinci_spi_chipselect;
dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 447497e9124c..d25cc4037e23 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -115,8 +115,8 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
{
struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
- clk_disable_unprepare(dwsmmio->clk);
dw_spi_remove_host(&dwsmmio->dws);
+ clk_disable_unprepare(dwsmmio->clk);
return 0;
}
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 14c8e7ce1913..15201645bdc4 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1002,7 +1002,8 @@ static int dspi_probe(struct platform_device *pdev)
if (IS_ERR(dspi->regmap)) {
dev_err(&pdev->dev, "failed to init regmap: %ld\n",
PTR_ERR(dspi->regmap));
- return PTR_ERR(dspi->regmap);
+ ret = PTR_ERR(dspi->regmap);
+ goto out_master_put;
}
dspi_init(dspi);
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 0fc3452652ae..8f2e97857e8b 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -814,7 +814,7 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
struct device_node *np = ofdev->dev.of_node;
struct spi_master *master;
struct resource mem;
- int irq, type;
+ int irq = 0, type;
int ret = -ENOMEM;
ret = of_mpc8xxx_spi_probe(ofdev);
@@ -847,6 +847,7 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
return 0;
err:
+ irq_dispose_mapping(irq);
if (type == TYPE_FSL)
of_fsl_spi_free_chipselects(dev);
return ret;
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 9a7c62f471dc..b402530a7a9a 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -95,6 +95,7 @@ struct spi_imx_data {
unsigned int spi_bus_clk;
unsigned int bytes_per_word;
+ unsigned int spi_drctl;
unsigned int count;
void (*tx)(struct spi_imx_data *);
@@ -246,6 +247,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
#define MX51_ECSPI_CTRL_XCH (1 << 2)
#define MX51_ECSPI_CTRL_SMC (1 << 3)
#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
+#define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16)
#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
@@ -355,6 +357,12 @@ static int mx51_ecspi_config(struct spi_device *spi,
*/
ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
+ /*
+ * Enable SPI_RDY handling (falling edge/level triggered).
+ */
+ if (spi->mode & SPI_READY)
+ ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
+
/* set clock speed */
ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
spi_imx->spi_bus_clk = clk;
@@ -1173,7 +1181,7 @@ static int spi_imx_probe(struct platform_device *pdev)
struct spi_master *master;
struct spi_imx_data *spi_imx;
struct resource *res;
- int i, ret, irq;
+ int i, ret, irq, spi_drctl;
if (!np && !mxc_platform_info) {
dev_err(&pdev->dev, "can't get the platform data\n");
@@ -1181,6 +1189,12 @@ static int spi_imx_probe(struct platform_device *pdev)
}
master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
+ ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
+ if ((ret < 0) || (spi_drctl >= 0x3)) {
+ /* '11' is reserved */
+ spi_drctl = 0;
+ }
+
if (!master)
return -ENOMEM;
@@ -1216,7 +1230,9 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx))
- spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
+ spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
+
+ spi_imx->spi_drctl = spi_drctl;
init_completion(&spi_imx->xfer_done);
diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
index 8a626f7fccea..d5976615d924 100644
--- a/drivers/spi/spi-lantiq-ssc.c
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -26,136 +26,140 @@
#include <lantiq_soc.h>
#endif
-#define SPI_RX_IRQ_NAME "spi_rx"
-#define SPI_TX_IRQ_NAME "spi_tx"
-#define SPI_ERR_IRQ_NAME "spi_err"
-#define SPI_FRM_IRQ_NAME "spi_frm"
-
-#define SPI_CLC 0x00
-#define SPI_PISEL 0x04
-#define SPI_ID 0x08
-#define SPI_CON 0x10
-#define SPI_STAT 0x14
-#define SPI_WHBSTATE 0x18
-#define SPI_TB 0x20
-#define SPI_RB 0x24
-#define SPI_RXFCON 0x30
-#define SPI_TXFCON 0x34
-#define SPI_FSTAT 0x38
-#define SPI_BRT 0x40
-#define SPI_BRSTAT 0x44
-#define SPI_SFCON 0x60
-#define SPI_SFSTAT 0x64
-#define SPI_GPOCON 0x70
-#define SPI_GPOSTAT 0x74
-#define SPI_FPGO 0x78
-#define SPI_RXREQ 0x80
-#define SPI_RXCNT 0x84
-#define SPI_DMACON 0xec
-#define SPI_IRNEN 0xf4
-#define SPI_IRNICR 0xf8
-#define SPI_IRNCR 0xfc
-
-#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
-#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S)
-#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
-#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S)
-#define SPI_CLC_DISS BIT(1) /* Disable status bit */
-#define SPI_CLC_DISR BIT(0) /* Disable request bit */
-
-#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
-#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S)
-#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
-#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S)
-#define SPI_ID_MOD_S 8 /* Module ID */
-#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S)
-#define SPI_ID_CFG_S 5 /* DMA interface support */
-#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S)
-#define SPI_ID_REV_M 0x1F /* Hardware revision number */
-
-#define SPI_CON_BM_S 16 /* Data width selection */
-#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S)
-#define SPI_CON_EM BIT(24) /* Echo mode */
-#define SPI_CON_IDLE BIT(23) /* Idle bit value */
-#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-#define SPI_CON_AEN BIT(10) /* Abort error enable */
-#define SPI_CON_REN BIT(9) /* Receive overflow error enable */
-#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-#define SPI_CON_LB BIT(7) /* Loopback control */
-#define SPI_CON_PO BIT(6) /* Clock polarity control */
-#define SPI_CON_PH BIT(5) /* Clock phase control */
-#define SPI_CON_HB BIT(4) /* Heading control */
-#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-
-#define SPI_STAT_RXBV_S 28
-#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S)
-#define SPI_STAT_BSY BIT(13) /* Busy flag */
-#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-#define SPI_STAT_AE BIT(10) /* Abort error flag */
-#define SPI_STAT_RE BIT(9) /* Receive error flag */
-#define SPI_STAT_TE BIT(8) /* Transmit error flag */
-#define SPI_STAT_ME BIT(7) /* Mode error flag */
-#define SPI_STAT_MS BIT(1) /* Master/slave select bit */
-#define SPI_STAT_EN BIT(0) /* Enable bit */
-#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
- SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
-
-#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
-#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
- SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
- SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
-
-#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
-#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S)
-#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-
-#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
-#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S)
-#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-
-#define SPI_FSTAT_RXFFL_S 0
-#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S)
-#define SPI_FSTAT_TXFFL_S 8
-#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S)
-
-#define SPI_GPOCON_ISCSBN_S 8
-#define SPI_GPOCON_INVOUTN_S 0
-
-#define SPI_FGPO_SETOUTN_S 8
-#define SPI_FGPO_CLROUTN_S 0
-
-#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
-#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
-
-#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
-#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
-#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
-#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
-#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
-#define SPI_IRNEN_ALL 0x1F
+#define LTQ_SPI_RX_IRQ_NAME "spi_rx"
+#define LTQ_SPI_TX_IRQ_NAME "spi_tx"
+#define LTQ_SPI_ERR_IRQ_NAME "spi_err"
+#define LTQ_SPI_FRM_IRQ_NAME "spi_frm"
+
+#define LTQ_SPI_CLC 0x00
+#define LTQ_SPI_PISEL 0x04
+#define LTQ_SPI_ID 0x08
+#define LTQ_SPI_CON 0x10
+#define LTQ_SPI_STAT 0x14
+#define LTQ_SPI_WHBSTATE 0x18
+#define LTQ_SPI_TB 0x20
+#define LTQ_SPI_RB 0x24
+#define LTQ_SPI_RXFCON 0x30
+#define LTQ_SPI_TXFCON 0x34
+#define LTQ_SPI_FSTAT 0x38
+#define LTQ_SPI_BRT 0x40
+#define LTQ_SPI_BRSTAT 0x44
+#define LTQ_SPI_SFCON 0x60
+#define LTQ_SPI_SFSTAT 0x64
+#define LTQ_SPI_GPOCON 0x70
+#define LTQ_SPI_GPOSTAT 0x74
+#define LTQ_SPI_FPGO 0x78
+#define LTQ_SPI_RXREQ 0x80
+#define LTQ_SPI_RXCNT 0x84
+#define LTQ_SPI_DMACON 0xec
+#define LTQ_SPI_IRNEN 0xf4
+#define LTQ_SPI_IRNICR 0xf8
+#define LTQ_SPI_IRNCR 0xfc
+
+#define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
+#define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S)
+#define LTQ_SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
+#define LTQ_SPI_CLC_RMC_M (0xFF << LTQ_SPI_CLC_RMC_S)
+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
+
+#define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
+#define LTQ_SPI_ID_TXFS_M (0x3F << LTQ_SPI_ID_TXFS_S)
+#define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
+#define LTQ_SPI_ID_RXFS_M (0x3F << LTQ_SPI_ID_RXFS_S)
+#define LTQ_SPI_ID_MOD_S 8 /* Module ID */
+#define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S)
+#define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */
+#define LTQ_SPI_ID_CFG_M (1 << LTQ_SPI_ID_CFG_S)
+#define LTQ_SPI_ID_REV_M 0x1F /* Hardware revision number */
+
+#define LTQ_SPI_CON_BM_S 16 /* Data width selection */
+#define LTQ_SPI_CON_BM_M (0x1F << LTQ_SPI_CON_BM_S)
+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
+
+#define LTQ_SPI_STAT_RXBV_S 28
+#define LTQ_SPI_STAT_RXBV_M (0x7 << LTQ_SPI_STAT_RXBV_S)
+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
+#define LTQ_SPI_STAT_ME BIT(7) /* Mode error flag */
+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
+#define LTQ_SPI_STAT_ERRORS (LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \
+ LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \
+ LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE)
+
+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
+#define LTQ_SPI_WHBSTATE_CLR_ERRORS (LTQ_SPI_WHBSTATE_CLRRUE | \
+ LTQ_SPI_WHBSTATE_CLRME | \
+ LTQ_SPI_WHBSTATE_CLRTE | \
+ LTQ_SPI_WHBSTATE_CLRRE | \
+ LTQ_SPI_WHBSTATE_CLRAE | \
+ LTQ_SPI_WHBSTATE_CLRTUE)
+
+#define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
+#define LTQ_SPI_RXFCON_RXFITL_M (0x3F << LTQ_SPI_RXFCON_RXFITL_S)
+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
+
+#define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
+#define LTQ_SPI_TXFCON_TXFITL_M (0x3F << LTQ_SPI_TXFCON_TXFITL_S)
+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
+
+#define LTQ_SPI_FSTAT_RXFFL_S 0
+#define LTQ_SPI_FSTAT_RXFFL_M (0x3f << LTQ_SPI_FSTAT_RXFFL_S)
+#define LTQ_SPI_FSTAT_TXFFL_S 8
+#define LTQ_SPI_FSTAT_TXFFL_M (0x3f << LTQ_SPI_FSTAT_TXFFL_S)
+
+#define LTQ_SPI_GPOCON_ISCSBN_S 8
+#define LTQ_SPI_GPOCON_INVOUTN_S 0
+
+#define LTQ_SPI_FGPO_SETOUTN_S 8
+#define LTQ_SPI_FGPO_CLROUTN_S 0
+
+#define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
+#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
+
+#define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
+#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
+#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
+#define LTQ_SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
+#define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
+#define LTQ_SPI_IRNEN_ALL 0x1F
struct lantiq_ssc_hwcfg {
unsigned int irnen_r;
@@ -208,16 +212,16 @@ static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr,
static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
{
- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
- return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
+ return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S;
}
static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
{
- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
- return fstat & SPI_FSTAT_RXFFL_M;
+ return fstat & LTQ_SPI_FSTAT_RXFFL_M;
}
static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
@@ -227,38 +231,38 @@ static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
{
- u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
+ u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S;
- val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
- lantiq_ssc_writel(spi, val, SPI_RXFCON);
+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
+ lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON);
}
static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
{
- u32 val = 1 << SPI_TXFCON_TXFITL_S;
+ u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S;
- val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
- lantiq_ssc_writel(spi, val, SPI_TXFCON);
+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
+ lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON);
}
static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
}
static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
}
static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
}
static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
}
static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
@@ -287,7 +291,7 @@ static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
spi_clk, max_speed_hz, brt);
- lantiq_ssc_writel(spi, brt, SPI_BRT);
+ lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT);
}
static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
@@ -296,9 +300,9 @@ static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
u32 bm;
/* CON.BM value = bits_per_word - 1 */
- bm = (bits_per_word - 1) << SPI_CON_BM_S;
+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S;
- lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
+ lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON);
}
static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
@@ -315,28 +319,28 @@ static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
* 3 1 1 1 0
*/
if (mode & SPI_CPHA)
- con_clr |= SPI_CON_PH;
+ con_clr |= LTQ_SPI_CON_PH;
else
- con_set |= SPI_CON_PH;
+ con_set |= LTQ_SPI_CON_PH;
if (mode & SPI_CPOL)
- con_set |= SPI_CON_PO | SPI_CON_IDLE;
+ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
else
- con_clr |= SPI_CON_PO | SPI_CON_IDLE;
+ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
/* Set heading control */
if (mode & SPI_LSB_FIRST)
- con_clr |= SPI_CON_HB;
+ con_clr |= LTQ_SPI_CON_HB;
else
- con_set |= SPI_CON_HB;
+ con_set |= LTQ_SPI_CON_HB;
/* Set loopback mode */
if (mode & SPI_LOOP)
- con_set |= SPI_CON_LB;
+ con_set |= LTQ_SPI_CON_LB;
else
- con_clr |= SPI_CON_LB;
+ con_clr |= LTQ_SPI_CON_LB;
- lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
+ lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON);
}
static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
@@ -347,37 +351,39 @@ static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
* Set clock divider for run mode to 1 to
* run at same frequency as FPI bus
*/
- lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
+ lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC);
/* Put controller into config mode */
hw_enter_config_mode(spi);
/* Clear error flags */
- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
/* Enable error checking, disable TX/RX */
- lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
- SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+ lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF |
+ LTQ_SPI_CON_RXOFF, LTQ_SPI_CON);
/* Setup default SPI mode */
hw_setup_bits_per_word(spi, spi->bits_per_word);
hw_setup_clock_mode(spi, SPI_MODE_0);
/* Enable master mode and clear error flags */
- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
- SPI_WHBSTATE);
+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS |
+ LTQ_SPI_WHBSTATE_CLR_ERRORS,
+ LTQ_SPI_WHBSTATE);
/* Reset GPIO/CS registers */
- lantiq_ssc_writel(spi, 0, SPI_GPOCON);
- lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
+ lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON);
+ lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO);
/* Enable and flush FIFOs */
rx_fifo_reset(spi);
tx_fifo_reset(spi);
/* Enable interrupts */
- lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
- SPI_IRNEN);
+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r |
+ LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
}
static int lantiq_ssc_setup(struct spi_device *spidev)
@@ -400,13 +406,13 @@ static int lantiq_ssc_setup(struct spi_device *spidev)
}
/* set GPO pin to CS mode */
- gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
+ gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S);
/* invert GPO pin */
if (spidev->mode & SPI_CS_HIGH)
gpocon |= 1 << (cs - spi->base_cs);
- lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
+ lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON);
return 0;
}
@@ -442,18 +448,18 @@ static void hw_setup_transfer(struct lantiq_ssc_spi *spi,
}
/* Configure transmitter and receiver */
- con = lantiq_ssc_readl(spi, SPI_CON);
+ con = lantiq_ssc_readl(spi, LTQ_SPI_CON);
if (t->tx_buf)
- con &= ~SPI_CON_TXOFF;
+ con &= ~LTQ_SPI_CON_TXOFF;
else
- con |= SPI_CON_TXOFF;
+ con |= LTQ_SPI_CON_TXOFF;
if (t->rx_buf)
- con &= ~SPI_CON_RXOFF;
+ con &= ~LTQ_SPI_CON_RXOFF;
else
- con |= SPI_CON_RXOFF;
+ con |= LTQ_SPI_CON_RXOFF;
- lantiq_ssc_writel(spi, con, SPI_CON);
+ lantiq_ssc_writel(spi, con, LTQ_SPI_CON);
}
static int lantiq_ssc_unprepare_message(struct spi_master *master,
@@ -464,7 +470,8 @@ static int lantiq_ssc_unprepare_message(struct spi_master *master,
flush_workqueue(spi->wq);
/* Disable transmitter and receiver while idle */
- lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF,
+ LTQ_SPI_CON);
return 0;
}
@@ -503,7 +510,7 @@ static void tx_fifo_write(struct lantiq_ssc_spi *spi)
break;
}
- lantiq_ssc_writel(spi, data, SPI_TB);
+ lantiq_ssc_writel(spi, data, LTQ_SPI_TB);
tx_free--;
}
}
@@ -517,7 +524,7 @@ static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi)
unsigned int rx_fill = rx_fifo_level(spi);
while (rx_fill) {
- data = lantiq_ssc_readl(spi, SPI_RB);
+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
switch (spi->bits_per_word) {
case 2 ... 8:
@@ -563,9 +570,9 @@ static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi)
*/
while (rx_fill) {
if (spi->rx_todo < 4) {
- rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
- SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
- data = lantiq_ssc_readl(spi, SPI_RB);
+ rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) &
+ LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S;
+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
shift = (rxbv - 1) * 8;
rx8 = spi->rx;
@@ -578,7 +585,7 @@ static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi)
spi->rx++;
}
} else {
- data = lantiq_ssc_readl(spi, SPI_RB);
+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
rx32 = (u32 *) spi->rx;
*rx32++ = data;
@@ -603,7 +610,7 @@ static void rx_request(struct lantiq_ssc_spi *spi)
if (rxreq > rxreq_max)
rxreq = rxreq_max;
- lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
+ lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ);
}
static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
@@ -642,26 +649,26 @@ completed:
static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
{
struct lantiq_ssc_spi *spi = data;
- u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
- if (!(stat & SPI_STAT_ERRORS))
+ if (!(stat & LTQ_SPI_STAT_ERRORS))
return IRQ_NONE;
- if (stat & SPI_STAT_RUE)
+ if (stat & LTQ_SPI_STAT_RUE)
dev_err(spi->dev, "receive underflow error\n");
- if (stat & SPI_STAT_TUE)
+ if (stat & LTQ_SPI_STAT_TUE)
dev_err(spi->dev, "transmit underflow error\n");
- if (stat & SPI_STAT_AE)
+ if (stat & LTQ_SPI_STAT_AE)
dev_err(spi->dev, "abort error\n");
- if (stat & SPI_STAT_RE)
+ if (stat & LTQ_SPI_STAT_RE)
dev_err(spi->dev, "receive overflow error\n");
- if (stat & SPI_STAT_TE)
+ if (stat & LTQ_SPI_STAT_TE)
dev_err(spi->dev, "transmit overflow error\n");
- if (stat & SPI_STAT_ME)
+ if (stat & LTQ_SPI_STAT_ME)
dev_err(spi->dev, "mode error\n");
/* Clear error flags */
- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
/* set bad status so it can be retried */
if (spi->master->cur_msg)
@@ -721,9 +728,9 @@ static void lantiq_ssc_bussy_work(struct work_struct *work)
end = jiffies + msecs_to_jiffies(timeout);
do {
- u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
- if (!(stat & SPI_STAT_BSY)) {
+ if (!(stat & LTQ_SPI_STAT_BSY)) {
spi_finalize_current_transfer(spi->master);
return;
}
@@ -755,9 +762,9 @@ static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable)
if (!!(spidev->mode & SPI_CS_HIGH) == enable)
fgpo = (1 << (cs - spi->base_cs));
else
- fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
+ fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S));
- lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
+ lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO);
}
static int lantiq_ssc_transfer_one(struct spi_master *master,
@@ -772,13 +779,13 @@ static int lantiq_ssc_transfer_one(struct spi_master *master,
}
static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
- .irnen_r = SPI_IRNEN_R_XWAY,
- .irnen_t = SPI_IRNEN_T_XWAY,
+ .irnen_r = LTQ_SPI_IRNEN_R_XWAY,
+ .irnen_t = LTQ_SPI_IRNEN_T_XWAY,
};
static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
- .irnen_r = SPI_IRNEN_R_XRX,
- .irnen_t = SPI_IRNEN_T_XRX,
+ .irnen_r = LTQ_SPI_IRNEN_R_XRX,
+ .irnen_t = LTQ_SPI_IRNEN_T_XRX,
};
static const struct of_device_id lantiq_ssc_match[] = {
@@ -814,21 +821,21 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
return -ENXIO;
}
- rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
+ rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME);
if (rx_irq < 0) {
- dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
+ dev_err(dev, "failed to get %s\n", LTQ_SPI_RX_IRQ_NAME);
return -ENXIO;
}
- tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
+ tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME);
if (tx_irq < 0) {
- dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
+ dev_err(dev, "failed to get %s\n", LTQ_SPI_TX_IRQ_NAME);
return -ENXIO;
}
- err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
+ err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME);
if (err_irq < 0) {
- dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
+ dev_err(dev, "failed to get %s\n", LTQ_SPI_ERR_IRQ_NAME);
return -ENXIO;
}
@@ -849,17 +856,17 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
}
err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt,
- 0, SPI_RX_IRQ_NAME, spi);
+ 0, LTQ_SPI_RX_IRQ_NAME, spi);
if (err)
goto err_master_put;
err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt,
- 0, SPI_TX_IRQ_NAME, spi);
+ 0, LTQ_SPI_TX_IRQ_NAME, spi);
if (err)
goto err_master_put;
err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt,
- 0, SPI_ERR_IRQ_NAME, spi);
+ 0, LTQ_SPI_ERR_IRQ_NAME, spi);
if (err)
goto err_master_put;
@@ -916,11 +923,11 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
}
INIT_WORK(&spi->work, lantiq_ssc_bussy_work);
- id = lantiq_ssc_readl(spi, SPI_ID);
- spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
- spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
- supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
- revision = id & SPI_ID_REV_M;
+ id = lantiq_ssc_readl(spi, LTQ_SPI_ID);
+ spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S;
+ spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S;
+ supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S;
+ revision = id & LTQ_SPI_ID_REV_M;
lantiq_ssc_hw_init(spi);
@@ -952,8 +959,8 @@ static int lantiq_ssc_remove(struct platform_device *pdev)
{
struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
- lantiq_ssc_writel(spi, 0, SPI_IRNEN);
- lantiq_ssc_writel(spi, 0, SPI_CLC);
+ lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN);
+ lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC);
rx_fifo_flush(spi);
tx_fifo_flush(spi);
hw_enter_config_mode(spi);
@@ -970,7 +977,6 @@ static struct platform_driver lantiq_ssc_driver = {
.remove = lantiq_ssc_remove,
.driver = {
.name = "spi-lantiq-ssc",
- .owner = THIS_MODULE,
.of_match_table = lantiq_ssc_match,
},
};
diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index 50e620f4e8fe..f4875f177df0 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -20,11 +20,13 @@
#include <linux/delay.h>
#include <linux/kernel.h>
+#include <linux/ktime.h>
#include <linux/list.h>
#include <linux/list_sort.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/printk.h>
+#include <linux/vmalloc.h>
#include <linux/spi/spi.h>
#include "spi-test.h"
@@ -55,6 +57,18 @@ module_param(run_only_test, int, 0);
MODULE_PARM_DESC(run_only_test,
"only run the test with this number (0-based !)");
+/* use vmalloc'ed buffers */
+int use_vmalloc;
+module_param(use_vmalloc, int, 0644);
+MODULE_PARM_DESC(use_vmalloc,
+ "use vmalloc'ed buffers instead of kmalloc'ed");
+
+/* check rx ranges */
+int check_ranges = 1;
+module_param(check_ranges, int, 0644);
+MODULE_PARM_DESC(check_ranges,
+ "checks rx_buffer pattern are valid");
+
/* the actual tests to execute */
static struct spi_test spi_tests[] = {
{
@@ -63,9 +77,9 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_rx_align = ITERATE_ALIGN,
+ .transfer_count = 1,
.transfers = {
{
- .len = 1,
.tx_buf = TX(0),
.rx_buf = RX(0),
},
@@ -77,9 +91,9 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_rx_align = ITERATE_ALIGN,
+ .transfer_count = 1,
.transfers = {
{
- .len = 1,
.tx_buf = TX(PAGE_SIZE - 4),
.rx_buf = RX(PAGE_SIZE - 4),
},
@@ -90,9 +104,9 @@ static struct spi_test spi_tests[] = {
.fill_option = FILL_COUNT_8,
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
+ .transfer_count = 1,
.transfers = {
{
- .len = 1,
.tx_buf = TX(0),
},
},
@@ -102,9 +116,9 @@ static struct spi_test spi_tests[] = {
.fill_option = FILL_COUNT_8,
.iterate_len = { ITERATE_MAX_LEN },
.iterate_rx_align = ITERATE_ALIGN,
+ .transfer_count = 1,
.transfers = {
{
- .len = 1,
.rx_buf = RX(0),
},
},
@@ -115,13 +129,12 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_transfer_mask = BIT(0) | BIT(1),
+ .transfer_count = 2,
.transfers = {
{
- .len = 1,
.tx_buf = TX(0),
},
{
- .len = 1,
/* this is why we cant use ITERATE_MAX_LEN */
.tx_buf = TX(SPI_TEST_MAX_SIZE_HALF),
},
@@ -132,10 +145,10 @@ static struct spi_test spi_tests[] = {
.fill_option = FILL_COUNT_8,
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
- .iterate_transfer_mask = BIT(1),
+ .iterate_transfer_mask = BIT(0),
+ .transfer_count = 2,
.transfers = {
{
- .len = 1,
.tx_buf = TX(64),
},
{
@@ -149,14 +162,14 @@ static struct spi_test spi_tests[] = {
.fill_option = FILL_COUNT_8,
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
- .iterate_transfer_mask = BIT(0),
+ .iterate_transfer_mask = BIT(1),
+ .transfer_count = 2,
.transfers = {
{
.len = 16,
.tx_buf = TX(0),
},
{
- .len = 1,
.tx_buf = TX(64),
},
},
@@ -167,13 +180,12 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_transfer_mask = BIT(0) | BIT(1),
+ .transfer_count = 2,
.transfers = {
{
- .len = 1,
.tx_buf = TX(0),
},
{
- .len = 1,
.rx_buf = RX(0),
},
},
@@ -184,9 +196,9 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_transfer_mask = BIT(0),
+ .transfer_count = 2,
.transfers = {
{
- .len = 1,
.tx_buf = TX(0),
},
{
@@ -201,13 +213,13 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_transfer_mask = BIT(1),
+ .transfer_count = 2,
.transfers = {
{
.len = 1,
.tx_buf = TX(0),
},
{
- .len = 1,
.rx_buf = RX(0),
},
},
@@ -218,14 +230,13 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_transfer_mask = BIT(0) | BIT(1),
+ .transfer_count = 2,
.transfers = {
{
- .len = 1,
.tx_buf = TX(0),
.rx_buf = RX(0),
},
{
- .len = 1,
/* making sure we align without overwrite
* the reason we can not use ITERATE_MAX_LEN
*/
@@ -240,9 +251,9 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_transfer_mask = BIT(0),
+ .transfer_count = 2,
.transfers = {
{
- .len = 1,
/* making sure we align without overwrite */
.tx_buf = TX(1024),
.rx_buf = RX(1024),
@@ -261,6 +272,7 @@ static struct spi_test spi_tests[] = {
.iterate_len = { ITERATE_MAX_LEN },
.iterate_tx_align = ITERATE_ALIGN,
.iterate_transfer_mask = BIT(1),
+ .transfer_count = 2,
.transfers = {
{
.len = 1,
@@ -268,13 +280,31 @@ static struct spi_test spi_tests[] = {
.rx_buf = RX(0),
},
{
- .len = 1,
/* making sure we align without overwrite */
.tx_buf = TX(1024),
.rx_buf = RX(1024),
},
},
},
+ {
+ .description = "two tx+rx transfers - delay after transfer",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_transfer_mask = BIT(0) | BIT(1),
+ .transfer_count = 2,
+ .transfers = {
+ {
+ .tx_buf = TX(0),
+ .rx_buf = RX(0),
+ .delay_usecs = 1000,
+ },
+ {
+ .tx_buf = TX(0),
+ .rx_buf = RX(0),
+ .delay_usecs = 1000,
+ },
+ },
+ },
{ /* end of tests sequence */ }
};
@@ -482,6 +512,36 @@ static int spi_check_rx_ranges(struct spi_device *spi,
return ret;
}
+static int spi_test_check_elapsed_time(struct spi_device *spi,
+ struct spi_test *test)
+{
+ int i;
+ unsigned long long estimated_time = 0;
+ unsigned long long delay_usecs = 0;
+
+ for (i = 0; i < test->transfer_count; i++) {
+ struct spi_transfer *xfer = test->transfers + i;
+ unsigned long long nbits = (unsigned long long)BITS_PER_BYTE *
+ xfer->len;
+
+ delay_usecs += xfer->delay_usecs;
+ if (!xfer->speed_hz)
+ continue;
+ estimated_time += div_u64(nbits * NSEC_PER_SEC, xfer->speed_hz);
+ }
+
+ estimated_time += delay_usecs * NSEC_PER_USEC;
+ if (test->elapsed_time < estimated_time) {
+ dev_err(&spi->dev,
+ "elapsed time %lld ns is shorter than minimum estimated time %lld ns\n",
+ test->elapsed_time, estimated_time);
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int spi_test_check_loopback_result(struct spi_device *spi,
struct spi_message *msg,
void *tx, void *rx)
@@ -492,9 +552,11 @@ static int spi_test_check_loopback_result(struct spi_device *spi,
int ret;
/* checks rx_buffer pattern are valid with loopback or without */
- ret = spi_check_rx_ranges(spi, msg, rx);
- if (ret)
- return ret;
+ if (check_ranges) {
+ ret = spi_check_rx_ranges(spi, msg, rx);
+ if (ret)
+ return ret;
+ }
/* if we run without loopback, then return now */
if (!loopback)
@@ -503,11 +565,11 @@ static int spi_test_check_loopback_result(struct spi_device *spi,
/* if applicable to transfer check that rx_buf is equal to tx_buf */
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
/* if there is no rx, then no check is needed */
- if (!xfer->rx_buf)
+ if (!xfer->len || !xfer->rx_buf)
continue;
/* so depending on tx_buf we need to handle things */
if (xfer->tx_buf) {
- for (i = 1; i < xfer->len; i++) {
+ for (i = 0; i < xfer->len; i++) {
txb = ((u8 *)xfer->tx_buf)[i];
rxb = ((u8 *)xfer->rx_buf)[i];
if (txb != rxb)
@@ -745,15 +807,6 @@ static int spi_test_run_iter(struct spi_device *spi,
/* copy the test template to test */
memcpy(&test, testtemplate, sizeof(test));
- /* set up test->transfers to the correct count */
- if (!test.transfer_count) {
- for (i = 0;
- (i < SPI_TEST_MAX_TRANSFERS) && test.transfers[i].len;
- i++) {
- test.transfer_count++;
- }
- }
-
/* if iterate_transfer_mask is not set,
* then set it to first transfer only
*/
@@ -799,8 +852,7 @@ static int spi_test_run_iter(struct spi_device *spi,
/* only when bit in transfer mask is set */
if (!(test.iterate_transfer_mask & BIT(i)))
continue;
- if (len)
- test.transfers[i].len = len;
+ test.transfers[i].len = len;
if (test.transfers[i].tx_buf)
test.transfers[i].tx_buf += tx_off;
if (test.transfers[i].tx_buf)
@@ -830,12 +882,16 @@ int spi_test_execute_msg(struct spi_device *spi, struct spi_test *test,
/* only if we do not simulate */
if (!simulate_only) {
+ ktime_t start;
+
/* dump the complete message before and after the transfer */
if (dump_messages == 3)
spi_test_dump_message(spi, msg, true);
+ start = ktime_get();
/* run spi message */
ret = spi_sync(spi, msg);
+ test->elapsed_time = ktime_to_ns(ktime_sub(ktime_get(), start));
if (ret == -ETIMEDOUT) {
dev_info(&spi->dev,
"spi-message timed out - reruning...\n");
@@ -861,6 +917,10 @@ int spi_test_execute_msg(struct spi_device *spi, struct spi_test *test,
/* run rx-buffer tests */
ret = spi_test_check_loopback_result(spi, msg, tx, rx);
+ if (ret)
+ goto exit;
+
+ ret = spi_test_check_elapsed_time(spi, test);
}
/* if requested or on error dump message (including data) */
@@ -910,15 +970,6 @@ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test,
/* iterate over all the iterable values using macros
* (to make it a bit more readable...
*/
-#define FOR_EACH_ITERATE(var, defaultvalue) \
- for (idx_##var = -1, var = defaultvalue; \
- ((idx_##var < 0) || \
- ( \
- (idx_##var < SPI_TEST_MAX_ITERATE) && \
- (var = test->iterate_##var[idx_##var]) \
- ) \
- ); \
- idx_##var++)
#define FOR_EACH_ALIGNMENT(var) \
for (var = 0; \
var < (test->iterate_##var ? \
@@ -928,7 +979,8 @@ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test,
1); \
var++)
- FOR_EACH_ITERATE(len, 0) {
+ for (idx_len = 0; idx_len < SPI_TEST_MAX_ITERATE &&
+ (len = test->iterate_len[idx_len]) != -1; idx_len++) {
FOR_EACH_ALIGNMENT(tx_align) {
FOR_EACH_ALIGNMENT(rx_align) {
/* and run the iteration */
@@ -965,13 +1017,19 @@ int spi_test_run_tests(struct spi_device *spi,
/* allocate rx/tx buffers of 128kB size without devm
* in the hope that is on a page boundary
*/
- rx = kzalloc(SPI_TEST_MAX_SIZE_PLUS, GFP_KERNEL);
+ if (use_vmalloc)
+ rx = vmalloc(SPI_TEST_MAX_SIZE_PLUS);
+ else
+ rx = kzalloc(SPI_TEST_MAX_SIZE_PLUS, GFP_KERNEL);
if (!rx) {
ret = -ENOMEM;
goto out;
}
- tx = kzalloc(SPI_TEST_MAX_SIZE_PLUS, GFP_KERNEL);
+ if (use_vmalloc)
+ tx = vmalloc(SPI_TEST_MAX_SIZE_PLUS);
+ else
+ tx = kzalloc(SPI_TEST_MAX_SIZE_PLUS, GFP_KERNEL);
if (!tx) {
ret = -ENOMEM;
goto out;
@@ -999,8 +1057,8 @@ int spi_test_run_tests(struct spi_device *spi,
}
out:
- kfree(rx);
- kfree(tx);
+ kvfree(rx);
+ kvfree(tx);
return ret;
}
EXPORT_SYMBOL_GPL(spi_test_run_tests);
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 79800e991ccd..7275223dbcd4 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -454,6 +454,8 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
int elements = 0;
int word_len, element_count;
struct omap2_mcspi_cs *cs = spi->controller_state;
+ void __iomem *chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
+
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
count = xfer->len;
@@ -549,8 +551,8 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
elements--;
- if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
- & OMAP2_MCSPI_CHSTAT_RXS)) {
+ if (!mcspi_wait_for_reg_bit(chstat_reg,
+ OMAP2_MCSPI_CHSTAT_RXS)) {
u32 w;
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
@@ -568,8 +570,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
return count;
}
}
- if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
- & OMAP2_MCSPI_CHSTAT_RXS)) {
+ if (!mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS)) {
u32 w;
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 6b001c4a5640..be2e87ee8b31 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -39,6 +39,8 @@
#define ORION_SPI_IF_CTRL_REG 0x00
#define ORION_SPI_IF_CONFIG_REG 0x04
+#define ORION_SPI_IF_RXLSBF BIT(14)
+#define ORION_SPI_IF_TXLSBF BIT(13)
#define ORION_SPI_DATA_OUT_REG 0x08
#define ORION_SPI_DATA_IN_REG 0x0c
#define ORION_SPI_INT_CAUSE_REG 0x10
@@ -234,6 +236,11 @@ orion_spi_mode_set(struct spi_device *spi)
reg |= ORION_SPI_MODE_CPOL;
if (spi->mode & SPI_CPHA)
reg |= ORION_SPI_MODE_CPHA;
+ if (spi->mode & SPI_LSB_FIRST)
+ reg |= ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF;
+ else
+ reg &= ~(ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF);
+
writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
}
@@ -591,8 +598,8 @@ static int orion_spi_probe(struct platform_device *pdev)
master->bus_num = cell_index;
}
- /* we support only mode 0, and no options */
- master->mode_bits = SPI_CPHA | SPI_CPOL;
+ /* we support all 4 SPI modes and LSB first option */
+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
master->set_cs = orion_spi_set_cs;
master->transfer_one = orion_spi_transfer_one;
master->num_chipselect = ORION_NUM_CHIPSELECTS;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index f7f7ba17b40e..2f76e022cc59 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2074,7 +2074,7 @@ pl022_platform_data_dt_get(struct device *dev)
{
struct device_node *np = dev->of_node;
struct pl022_ssp_controller *pd;
- u32 tmp;
+ u32 tmp = 0;
if (!np) {
dev_err(dev, "no dt node defined\n");
diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index f63714ffb62f..52cf0e9189c2 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -21,6 +21,7 @@
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/platform_data/sc18is602.h>
#include <linux/gpio/consumer.h>
@@ -271,7 +272,10 @@ static int sc18is602_probe(struct i2c_client *client,
hw->dev = dev;
hw->ctrl = 0xff;
- hw->id = id->driver_data;
+ if (client->dev.of_node)
+ hw->id = (enum chips)of_device_get_match_data(&client->dev);
+ else
+ hw->id = id->driver_data;
switch (hw->id) {
case sc18is602:
@@ -323,9 +327,27 @@ static const struct i2c_device_id sc18is602_id[] = {
};
MODULE_DEVICE_TABLE(i2c, sc18is602_id);
+static const struct of_device_id sc18is602_of_match[] = {
+ {
+ .compatible = "nxp,sc18is602",
+ .data = (void *)sc18is602
+ },
+ {
+ .compatible = "nxp,sc18is602b",
+ .data = (void *)sc18is602b
+ },
+ {
+ .compatible = "nxp,sc18is603",
+ .data = (void *)sc18is603
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sc18is602_of_match);
+
static struct i2c_driver sc18is602_driver = {
.driver = {
.name = "sc18is602",
+ .of_match_table = of_match_ptr(sc18is602_of_match),
},
.probe = sc18is602_probe,
.id_table = sc18is602_id,
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index e3114832c485..03a773a9531a 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -46,13 +46,19 @@
#define SUN6I_TFR_CTL_XCH BIT(31)
#define SUN6I_INT_CTL_REG 0x10
+#define SUN6I_INT_CTL_RF_RDY BIT(0)
+#define SUN6I_INT_CTL_TF_ERQ BIT(4)
#define SUN6I_INT_CTL_RF_OVF BIT(8)
#define SUN6I_INT_CTL_TC BIT(12)
#define SUN6I_INT_STA_REG 0x14
#define SUN6I_FIFO_CTL_REG 0x18
+#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_MASK 0xff
+#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_BITS 0
#define SUN6I_FIFO_CTL_RF_RST BIT(15)
+#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_MASK 0xff
+#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_BITS 16
#define SUN6I_FIFO_CTL_TF_RST BIT(31)
#define SUN6I_FIFO_STA_REG 0x1c
@@ -68,14 +74,16 @@
#define SUN6I_CLK_CTL_CDR1(div) (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)
#define SUN6I_CLK_CTL_DRS BIT(12)
+#define SUN6I_MAX_XFER_SIZE 0xffffff
+
#define SUN6I_BURST_CNT_REG 0x30
-#define SUN6I_BURST_CNT(cnt) ((cnt) & 0xffffff)
+#define SUN6I_BURST_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
#define SUN6I_XMIT_CNT_REG 0x34
-#define SUN6I_XMIT_CNT(cnt) ((cnt) & 0xffffff)
+#define SUN6I_XMIT_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
#define SUN6I_BURST_CTL_CNT_REG 0x38
-#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & 0xffffff)
+#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
#define SUN6I_TXDATA_REG 0x200
#define SUN6I_RXDATA_REG 0x300
@@ -105,6 +113,31 @@ static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value)
writel(value, sspi->base_addr + reg);
}
+static inline u32 sun6i_spi_get_tx_fifo_count(struct sun6i_spi *sspi)
+{
+ u32 reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG);
+
+ reg >>= SUN6I_FIFO_STA_TF_CNT_BITS;
+
+ return reg & SUN6I_FIFO_STA_TF_CNT_MASK;
+}
+
+static inline void sun6i_spi_enable_interrupt(struct sun6i_spi *sspi, u32 mask)
+{
+ u32 reg = sun6i_spi_read(sspi, SUN6I_INT_CTL_REG);
+
+ reg |= mask;
+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, reg);
+}
+
+static inline void sun6i_spi_disable_interrupt(struct sun6i_spi *sspi, u32 mask)
+{
+ u32 reg = sun6i_spi_read(sspi, SUN6I_INT_CTL_REG);
+
+ reg &= ~mask;
+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, reg);
+}
+
static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
{
u32 reg, cnt;
@@ -127,10 +160,13 @@ static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
{
+ u32 cnt;
u8 byte;
- if (len > sspi->len)
- len = sspi->len;
+ /* See how much data we can fit */
+ cnt = sspi->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
+
+ len = min3(len, (int)cnt, sspi->len);
while (len--) {
byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
@@ -158,9 +194,7 @@ static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
static size_t sun6i_spi_max_transfer_size(struct spi_device *spi)
{
- struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
-
- return sspi->fifo_depth - 1;
+ return SUN6I_MAX_XFER_SIZE - 1;
}
static int sun6i_spi_transfer_one(struct spi_master *master,
@@ -170,12 +204,12 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
struct sun6i_spi *sspi = spi_master_get_devdata(master);
unsigned int mclk_rate, div, timeout;
unsigned int start, end, tx_time;
+ unsigned int trig_level;
unsigned int tx_len = 0;
int ret = 0;
u32 reg;
- /* We don't support transfer larger than the FIFO */
- if (tfr->len > sspi->fifo_depth)
+ if (tfr->len > SUN6I_MAX_XFER_SIZE)
return -EINVAL;
reinit_completion(&sspi->done);
@@ -191,6 +225,17 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST);
/*
+ * Setup FIFO interrupt trigger level
+ * Here we choose 3/4 of the full fifo depth, as it's the hardcoded
+ * value used in old generation of Allwinner SPI controller.
+ * (See spi-sun4i.c)
+ */
+ trig_level = sspi->fifo_depth / 4 * 3;
+ sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
+ (trig_level << SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_BITS) |
+ (trig_level << SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_BITS));
+
+ /*
* Setup the transfer control register: Chip Select,
* polarities, etc.
*/
@@ -274,6 +319,10 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
/* Enable the interrupts */
sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
+ sun6i_spi_enable_interrupt(sspi, SUN6I_INT_CTL_TC |
+ SUN6I_INT_CTL_RF_RDY);
+ if (tx_len > sspi->fifo_depth)
+ sun6i_spi_enable_interrupt(sspi, SUN6I_INT_CTL_TF_ERQ);
/* Start the transfer */
reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
@@ -293,8 +342,6 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
goto out;
}
- sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);
-
out:
sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
@@ -309,10 +356,33 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
/* Transfer complete */
if (status & SUN6I_INT_CTL_TC) {
sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
+ sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);
complete(&sspi->done);
return IRQ_HANDLED;
}
+ /* Receive FIFO 3/4 full */
+ if (status & SUN6I_INT_CTL_RF_RDY) {
+ sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
+ /* Only clear the interrupt _after_ draining the FIFO */
+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_RF_RDY);
+ return IRQ_HANDLED;
+ }
+
+ /* Transmit FIFO 3/4 empty */
+ if (status & SUN6I_INT_CTL_TF_ERQ) {
+ sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH);
+
+ if (!sspi->len)
+ /* nothing left to transmit */
+ sun6i_spi_disable_interrupt(sspi, SUN6I_INT_CTL_TF_ERQ);
+
+ /* Only clear the interrupt _after_ re-seeding the FIFO */
+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TF_ERQ);
+
+ return IRQ_HANDLED;
+ }
+
return IRQ_NONE;
}
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 73779cecc3bb..08012ae5aa66 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -837,7 +837,7 @@ static int tegra_spi_transfer_one_message(struct spi_master *master,
SPI_DMA_TIMEOUT);
if (WARN_ON(ret == 0)) {
dev_err(tspi->dev,
- "spi trasfer timeout, err %d\n", ret);
+ "spi transfer timeout, err %d\n", ret);
ret = -EIO;
goto complete_xfer;
}
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index b6558bb6f9df..2c797ee2664d 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -341,7 +341,7 @@ static int tegra_sflash_transfer_one_message(struct spi_master *master,
SPI_DMA_TIMEOUT);
if (WARN_ON(ret == 0)) {
dev_err(tsd->dev,
- "spi trasfer timeout, err %d\n", ret);
+ "spi transfer timeout, err %d\n", ret);
ret = -EIO;
goto exit;
}
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 85c91f58b42f..0c06ce424210 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -824,7 +824,7 @@ static int tegra_slink_transfer_one(struct spi_master *master,
SLINK_DMA_TIMEOUT);
if (WARN_ON(ret == 0)) {
dev_err(tspi->dev,
- "spi trasfer timeout, err %d\n", ret);
+ "spi transfer timeout, err %d\n", ret);
return -EIO;
}
diff --git a/drivers/spi/spi-test.h b/drivers/spi/spi-test.h
index 922c52833239..6ed7b899da8a 100644
--- a/drivers/spi/spi-test.h
+++ b/drivers/spi/spi-test.h
@@ -48,9 +48,8 @@
*
* @msg: a template @spi_message usedfor the default settings
* @transfers: array of @spi_transfers that are part of the
- * resulting spi_message. The first transfer with len == 0
- * signifies the end of the list
- * @transfer_count: normally computed number of transfers with len > 0
+ * resulting spi_message.
+ * @transfer_count: number of transfers
*
* @run_test: run a specific spi_test - this allows to override
* the default implementation of @spi_test_run_transfer
@@ -62,8 +61,7 @@
* @expected_return: the expected return code - in some cases we want to
* test also for error conditions
*
- * @iterate_len: list of length to iterate on (in addition to the
- * explicitly set @spi_transfer.len)
+ * @iterate_len: list of length to iterate on
* @iterate_tx_align: change the alignment of @spi_transfer.tx_buf
* for all values in the below range if set.
* the ranges are:
@@ -77,6 +75,7 @@
* @fill_option: define the way how tx_buf is filled
* @fill_pattern: fill pattern to apply to the tx_buf
* (used in some of the @fill_options)
+ * @elapsed_time: elapsed time in nanoseconds
*/
struct spi_test {
@@ -89,7 +88,7 @@ struct spi_test {
int (*execute_msg)(struct spi_device *spi, struct spi_test *test,
void *tx, void *rx);
int expected_return;
- /* iterate over all the non-zero values */
+ /* iterate over all values, terminated by a -1 */
int iterate_len[SPI_TEST_MAX_ITERATE];
int iterate_tx_align;
int iterate_rx_align;
@@ -110,6 +109,7 @@ struct spi_test {
#define FILL_TRANSFER_BYTE_32 11 /* fill with the transfer byte - 32 bit */
#define FILL_TRANSFER_NUM 16 /* fill with the transfer number */
u32 fill_pattern;
+ unsigned long long elapsed_time;
};
/* default implementation for @spi_test.run_test */
@@ -126,11 +126,12 @@ int spi_test_execute_msg(struct spi_device *spi,
int spi_test_run_tests(struct spi_device *spi,
struct spi_test *tests);
-/* some of the default @spi_transfer.len to test */
-#define ITERATE_LEN 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \
+#define ITERATE_LEN_LIST 0, 1, 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \
1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537
-
-#define ITERATE_MAX_LEN ITERATE_LEN, SPI_TEST_MAX_SIZE - 1, SPI_TEST_MAX_SIZE
+/* some of the default @spi_transfer.len to test, terminated by a -1 */
+#define ITERATE_LEN ITERATE_LEN_LIST, -1
+#define ITERATE_MAX_LEN ITERATE_LEN_LIST, (SPI_TEST_MAX_SIZE - 1), \
+ SPI_TEST_MAX_SIZE, -1
/* the default alignment to test */
#define ITERATE_ALIGN sizeof(int)
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index ad76a44fee6f..c24d9b45a27c 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -33,6 +33,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include <linux/sizes.h>
#include <linux/spi/spi.h>
@@ -57,6 +58,8 @@ struct ti_qspi {
struct ti_qspi_regs ctx_reg;
dma_addr_t mmap_phys_base;
+ dma_addr_t rx_bb_dma_addr;
+ void *rx_bb_addr;
struct dma_chan *rx_chan;
u32 spi_max_frequency;
@@ -126,6 +129,8 @@ struct ti_qspi {
#define QSPI_SETUP_ADDR_SHIFT 8
#define QSPI_SETUP_DUMMY_SHIFT 10
+#define QSPI_DMA_BUFFER_SIZE SZ_64K
+
static inline unsigned long ti_qspi_read(struct ti_qspi *qspi,
unsigned long reg)
{
@@ -395,14 +400,12 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst,
dma_addr_t dma_src, size_t len)
{
struct dma_chan *chan = qspi->rx_chan;
- struct dma_device *dma_dev = chan->device;
dma_cookie_t cookie;
enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
struct dma_async_tx_descriptor *tx;
int ret;
- tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src,
- len, flags);
+ tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
if (!tx) {
dev_err(qspi->dev, "device_prep_dma_memcpy error\n");
return -EIO;
@@ -431,6 +434,35 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst,
return 0;
}
+static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi,
+ struct spi_flash_read_message *msg)
+{
+ size_t readsize = msg->len;
+ void *to = msg->buf;
+ dma_addr_t dma_src = qspi->mmap_phys_base + msg->from;
+ int ret = 0;
+
+ /*
+ * Use bounce buffer as FS like jffs2, ubifs may pass
+ * buffers that does not belong to kernel lowmem region.
+ */
+ while (readsize != 0) {
+ size_t xfer_len = min_t(size_t, QSPI_DMA_BUFFER_SIZE,
+ readsize);
+
+ ret = ti_qspi_dma_xfer(qspi, qspi->rx_bb_dma_addr,
+ dma_src, xfer_len);
+ if (ret != 0)
+ return ret;
+ memcpy(to, qspi->rx_bb_addr, xfer_len);
+ readsize -= xfer_len;
+ dma_src += xfer_len;
+ to += xfer_len;
+ }
+
+ return ret;
+}
+
static int ti_qspi_dma_xfer_sg(struct ti_qspi *qspi, struct sg_table rx_sg,
loff_t from)
{
@@ -498,6 +530,12 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi,
QSPI_SPI_SETUP_REG(spi->chip_select));
}
+static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi,
+ struct spi_flash_read_message *msg)
+{
+ return virt_addr_valid(msg->buf);
+}
+
static int ti_qspi_spi_flash_read(struct spi_device *spi,
struct spi_flash_read_message *msg)
{
@@ -511,15 +549,12 @@ static int ti_qspi_spi_flash_read(struct spi_device *spi,
ti_qspi_setup_mmap_read(spi, msg);
if (qspi->rx_chan) {
- if (msg->cur_msg_mapped) {
+ if (msg->cur_msg_mapped)
ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from);
- if (ret)
- goto err_unlock;
- } else {
- dev_err(qspi->dev, "Invalid address for DMA\n");
- ret = -EIO;
+ else
+ ret = ti_qspi_dma_bounce_buffer(qspi, msg);
+ if (ret)
goto err_unlock;
- }
} else {
memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len);
}
@@ -725,6 +760,17 @@ static int ti_qspi_probe(struct platform_device *pdev)
ret = 0;
goto no_dma;
}
+ qspi->rx_bb_addr = dma_alloc_coherent(qspi->dev,
+ QSPI_DMA_BUFFER_SIZE,
+ &qspi->rx_bb_dma_addr,
+ GFP_KERNEL | GFP_DMA);
+ if (!qspi->rx_bb_addr) {
+ dev_err(qspi->dev,
+ "dma_alloc_coherent failed, using PIO mode\n");
+ dma_release_channel(qspi->rx_chan);
+ goto no_dma;
+ }
+ master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma;
master->dma_rx = qspi->rx_chan;
init_completion(&qspi->transfer_complete);
if (res_mmap)
@@ -765,6 +811,10 @@ static int ti_qspi_remove(struct platform_device *pdev)
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ if (qspi->rx_bb_addr)
+ dma_free_coherent(qspi->dev, QSPI_DMA_BUFFER_SIZE,
+ qspi->rx_bb_addr,
+ qspi->rx_bb_dma_addr);
if (qspi->rx_chan)
dma_release_channel(qspi->rx_chan);
diff --git a/drivers/spi/spi-xlp.c b/drivers/spi/spi-xlp.c
index bea7a93a6046..80cb4d6af892 100644
--- a/drivers/spi/spi-xlp.c
+++ b/drivers/spi/spi-xlp.c
@@ -442,6 +442,7 @@ static int xlp_spi_probe(struct platform_device *pdev)
#ifdef CONFIG_ACPI
static const struct acpi_device_id xlp_spi_acpi_match[] = {
{ "BRCM900D", 0 },
+ { "CAV900D", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, xlp_spi_acpi_match);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 90b5b2efafbf..89254a55eb2e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -31,6 +31,7 @@
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/pm_domain.h>
+#include <linux/property.h>
#include <linux/export.h>
#include <linux/sched/rt.h>
#include <uapi/linux/sched/types.h>
@@ -600,13 +601,28 @@ struct spi_device *spi_new_device(struct spi_master *master,
proxy->controller_data = chip->controller_data;
proxy->controller_state = NULL;
- status = spi_add_device(proxy);
- if (status < 0) {
- spi_dev_put(proxy);
- return NULL;
+ if (chip->properties) {
+ status = device_add_properties(&proxy->dev, chip->properties);
+ if (status) {
+ dev_err(&master->dev,
+ "failed to add properties to '%s': %d\n",
+ chip->modalias, status);
+ goto err_dev_put;
+ }
}
+ status = spi_add_device(proxy);
+ if (status < 0)
+ goto err_remove_props;
+
return proxy;
+
+err_remove_props:
+ if (chip->properties)
+ device_remove_properties(&proxy->dev);
+err_dev_put:
+ spi_dev_put(proxy);
+ return NULL;
}
EXPORT_SYMBOL_GPL(spi_new_device);
@@ -664,6 +680,7 @@ static void spi_match_master_to_boardinfo(struct spi_master *master,
*
* The board info passed can safely be __initdata ... but be careful of
* any embedded pointers (platform_data, etc), they're copied as-is.
+ * Device properties are deep-copied though.
*
* Return: zero on success, else a negative error code.
*/
@@ -673,7 +690,7 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
int i;
if (!n)
- return -EINVAL;
+ return 0;
bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
if (!bi)
@@ -683,6 +700,13 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
struct spi_master *master;
memcpy(&bi->board_info, info, sizeof(*info));
+ if (info->properties) {
+ bi->board_info.properties =
+ property_entries_dup(info->properties);
+ if (IS_ERR(bi->board_info.properties))
+ return PTR_ERR(bi->board_info.properties);
+ }
+
mutex_lock(&board_lock);
list_add_tail(&bi->list, &board_list);
list_for_each_entry(master, &spi_master_list, list)
@@ -1015,7 +1039,7 @@ static int spi_transfer_one_message(struct spi_master *master,
ret = 0;
ms = 8LL * 1000LL * xfer->len;
do_div(ms, xfer->speed_hz);
- ms += ms + 100; /* some tolerance */
+ ms += ms + 200; /* some tolerance */
if (ms > UINT_MAX)
ms = UINT_MAX;
@@ -2830,7 +2854,7 @@ int spi_flash_read(struct spi_device *spi,
mutex_lock(&master->bus_lock_mutex);
mutex_lock(&master->io_mutex);
- if (master->dma_rx) {
+ if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) {
rx_dev = master->dma_rx->device->dev;
ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
msg->buf, msg->len,
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 9e2e099baf8c..9a2a79a871ba 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -697,6 +697,7 @@ static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "rohm,dh2228fv" },
{ .compatible = "lineartechnology,ltc2488" },
{ .compatible = "ge,achc" },
+ { .compatible = "semtech,sx1301" },
{},
};
MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 75c6bd0ac605..935bd2854ff1 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -23,6 +23,7 @@
#include <linux/scatterlist.h>
struct dma_chan;
+struct property_entry;
struct spi_master;
struct spi_transfer;
struct spi_flash_read_message;
@@ -375,6 +376,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @unprepare_message: undo any work done by prepare_message().
* @spi_flash_read: to support spi-controller hardwares that provide
* accelerated interface to read from flash devices.
+ * @spi_flash_can_dma: analogous to can_dma() interface, but for
+ * controllers implementing spi_flash_read.
* @flash_read_supported: spi device supports flash read
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that
@@ -538,6 +541,8 @@ struct spi_master {
struct spi_message *message);
int (*spi_flash_read)(struct spi_device *spi,
struct spi_flash_read_message *msg);
+ bool (*spi_flash_can_dma)(struct spi_device *spi,
+ struct spi_flash_read_message *msg);
bool (*flash_read_supported)(struct spi_device *spi);
/*
@@ -891,7 +896,7 @@ static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags
unsigned i;
struct spi_transfer *t = (struct spi_transfer *)(m + 1);
- INIT_LIST_HEAD(&m->transfers);
+ spi_message_init_no_memset(m);
for (i = 0; i < ntrans; i++, t++)
spi_message_add_tail(t, m);
}
@@ -1209,6 +1214,7 @@ int spi_flash_read(struct spi_device *spi,
* @modalias: Initializes spi_device.modalias; identifies the driver.
* @platform_data: Initializes spi_device.platform_data; the particular
* data stored there is driver-specific.
+ * @properties: Additional device properties for the device.
* @controller_data: Initializes spi_device.controller_data; some
* controllers need hints about hardware setup, e.g. for DMA.
* @irq: Initializes spi_device.irq; depends on how the board is wired.
@@ -1241,10 +1247,12 @@ struct spi_board_info {
*
* platform_data goes to spi_device.dev.platform_data,
* controller_data goes to spi_device.controller_data,
+ * device properties are copied and attached to spi_device,
* irq is copied too
*/
char modalias[SPI_NAME_SIZE];
const void *platform_data;
+ const struct property_entry *properties;
void *controller_data;
int irq;
diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c
index 816f119c9b7b..8c590cd1171a 100644
--- a/tools/spi/spidev_test.c
+++ b/tools/spi/spidev_test.c
@@ -18,6 +18,7 @@
#include <string.h>
#include <getopt.h>
#include <fcntl.h>
+#include <time.h>
#include <sys/ioctl.h>
#include <linux/ioctl.h>
#include <sys/stat.h>
@@ -40,6 +41,9 @@ static char *output_file;
static uint32_t speed = 500000;
static uint16_t delay;
static int verbose;
+static int transfer_size;
+static int iterations;
+static int interval = 5; /* interval in seconds for showing transfer rate */
uint8_t default_tx[] = {
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
@@ -156,13 +160,13 @@ static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
close(out_fd);
}
- if (verbose || !output_file)
+ if (verbose)
hex_dump(rx, len, 32, "RX");
}
static void print_usage(const char *prog)
{
- printf("Usage: %s [-DsbdlHOLC3]\n", prog);
+ printf("Usage: %s [-DsbdlHOLC3vpNR24SI]\n", prog);
puts(" -D --device device to use (default /dev/spidev1.1)\n"
" -s --speed max speed (Hz)\n"
" -d --delay delay (usec)\n"
@@ -180,7 +184,9 @@ static void print_usage(const char *prog)
" -N --no-cs no chip select\n"
" -R --ready slave pulls low to pause\n"
" -2 --dual dual transfer\n"
- " -4 --quad quad transfer\n");
+ " -4 --quad quad transfer\n"
+ " -S --size transfer size\n"
+ " -I --iter iterations\n");
exit(1);
}
@@ -205,11 +211,13 @@ static void parse_opts(int argc, char *argv[])
{ "dual", 0, 0, '2' },
{ "verbose", 0, 0, 'v' },
{ "quad", 0, 0, '4' },
+ { "size", 1, 0, 'S' },
+ { "iter", 1, 0, 'I' },
{ NULL, 0, 0, 0 },
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR24p:v",
+ c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR24p:vS:I:",
lopts, NULL);
if (c == -1)
@@ -270,6 +278,12 @@ static void parse_opts(int argc, char *argv[])
case '4':
mode |= SPI_TX_QUAD;
break;
+ case 'S':
+ transfer_size = atoi(optarg);
+ break;
+ case 'I':
+ iterations = atoi(optarg);
+ break;
default:
print_usage(argv[0]);
break;
@@ -336,6 +350,57 @@ static void transfer_file(int fd, char *filename)
close(tx_fd);
}
+static uint64_t _read_count;
+static uint64_t _write_count;
+
+static void show_transfer_rate(void)
+{
+ static uint64_t prev_read_count, prev_write_count;
+ double rx_rate, tx_rate;
+
+ rx_rate = ((_read_count - prev_read_count) * 8) / (interval*1000.0);
+ tx_rate = ((_write_count - prev_write_count) * 8) / (interval*1000.0);
+
+ printf("rate: tx %.1fkbps, rx %.1fkbps\n", rx_rate, tx_rate);
+
+ prev_read_count = _read_count;
+ prev_write_count = _write_count;
+}
+
+static void transfer_buf(int fd, int len)
+{
+ uint8_t *tx;
+ uint8_t *rx;
+ int i;
+
+ tx = malloc(len);
+ if (!tx)
+ pabort("can't allocate tx buffer");
+ for (i = 0; i < len; i++)
+ tx[i] = random();
+
+ rx = malloc(len);
+ if (!rx)
+ pabort("can't allocate rx buffer");
+
+ transfer(fd, tx, rx, len);
+
+ _write_count += len;
+ _read_count += len;
+
+ if (mode & SPI_LOOP) {
+ if (memcmp(tx, rx, len)) {
+ fprintf(stderr, "transfer error !\n");
+ hex_dump(tx, len, 32, "TX");
+ hex_dump(rx, len, 32, "RX");
+ exit(1);
+ }
+ }
+
+ free(rx);
+ free(tx);
+}
+
int main(int argc, char *argv[])
{
int ret = 0;
@@ -391,7 +456,25 @@ int main(int argc, char *argv[])
transfer_escaped_string(fd, input_tx);
else if (input_file)
transfer_file(fd, input_file);
- else
+ else if (transfer_size) {
+ struct timespec last_stat;
+
+ clock_gettime(CLOCK_MONOTONIC, &last_stat);
+
+ while (iterations-- > 0) {
+ struct timespec current;
+
+ transfer_buf(fd, transfer_size);
+
+ clock_gettime(CLOCK_MONOTONIC, &current);
+ if (current.tv_sec - last_stat.tv_sec > interval) {
+ show_transfer_rate();
+ last_stat = current;
+ }
+ }
+ printf("total: tx %.1fKB, rx %.1fKB\n",
+ _write_count/1024.0, _read_count/1024.0);
+ } else
transfer(fd, default_tx, default_rx, sizeof(default_tx));
close(fd);