diff options
| -rw-r--r-- | arch/powerpc/platforms/powernv/pci-ioda.c | 62 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/pci.c | 6 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/pci.h | 8 |
3 files changed, 42 insertions, 34 deletions
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index a5c5f15242ba..3d4e9588a695 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -852,18 +852,19 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus, return phb->ioda.pe_rmap[(bus->number << 8) | devfn]; } -void __init pnv_pci_init_ioda1_phb(struct device_node *np) +void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) { struct pci_controller *hose; static int primary = 1; struct pnv_phb *phb; unsigned long size, m32map_off, iomap_off, pemap_off; const u64 *prop64; + const u32 *prop32; u64 phb_id; void *aux; long rc; - pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name); + pr_info(" Initializing IODA%d OPAL PHB %s\n", ioda_type, np->full_name); prop64 = of_get_property(np, "ibm,opal-phbid", NULL); if (!prop64) { @@ -890,37 +891,34 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np) hose->last_busno = 0xff; hose->private_data = phb; phb->opal_id = phb_id; - phb->type = PNV_PHB_IODA1; + phb->type = ioda_type; /* Detect specific models for error handling */ if (of_device_is_compatible(np, "ibm,p7ioc-pciex")) phb->model = PNV_PHB_MODEL_P7IOC; + else if (of_device_is_compatible(np, "ibm,p8-pciex")) + phb->model = PNV_PHB_MODEL_PHB3; else phb->model = PNV_PHB_MODEL_UNKNOWN; - /* We parse "ranges" now since we need to deduce the register base - * from the IO base - */ + /* Parse 32-bit and IO ranges (if any) */ pci_process_bridge_OF_ranges(phb->hose, np, primary); primary = 0; - /* Magic formula from Milton */ + /* Get registers */ phb->regs = of_iomap(np, 0); if (phb->regs == NULL) pr_err(" Failed to map registers !\n"); - - /* XXX This is hack-a-thon. This needs to be changed so that: - * - we obtain stuff like PE# etc... from device-tree - * - we properly re-allocate M32 ourselves - * (the OFW one isn't very good) - */ - /* Initialize more IODA stuff */ - phb->ioda.total_pe = 128; + prop32 = of_get_property(np, "ibm,opal-num-pes", NULL); + if (!prop32) + phb->ioda.total_pe = 1; + else + phb->ioda.total_pe = *prop32; phb->ioda.m32_size = resource_size(&hose->mem_resources[0]); - /* OFW Has already off top 64k of M32 space (MSI space) */ + /* FW Has already off top 64k of M32 space (MSI space) */ phb->ioda.m32_size += 0x10000; phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe; @@ -930,7 +928,10 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np) phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe; phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ - /* Allocate aux data & arrays */ + /* Allocate aux data & arrays + * + * XXX TODO: Don't allocate io segmap on PHB3 + */ size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long)); m32map_off = size; size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]); @@ -960,7 +961,7 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np) hose->mem_resources[2].start = 0; hose->mem_resources[2].end = 0; -#if 0 +#if 0 /* We should really do that ... */ rc = opal_pci_set_phb_mem_window(opal->phb_id, window_type, window_num, @@ -974,16 +975,6 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np) phb->ioda.m32_size, phb->ioda.m32_segsize, phb->ioda.io_size, phb->ioda.io_segsize); - if (phb->regs) { - pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100)); - pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160)); - pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170)); - pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178)); - pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180)); - pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190)); - pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198)); - pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0)); - } phb->hose->ops = &pnv_pci_ops; /* Setup RID -> PE mapping function */ @@ -1011,7 +1002,18 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np) rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET); if (rc) pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc); - opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE); + + /* + * On IODA1 map everything to PE#0, on IODA2 we assume the IODA reset + * has cleared the RTT which has the same effect + */ + if (ioda_type == PNV_PHB_IODA1) + opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE); +} + +void pnv_pci_init_ioda2_phb(struct device_node *np) +{ + pnv_pci_init_ioda_phb(np, PNV_PHB_IODA2); } void __init pnv_pci_init_ioda_hub(struct device_node *np) @@ -1034,6 +1036,6 @@ void __init pnv_pci_init_ioda_hub(struct device_node *np) for_each_child_of_node(np, phbn) { /* Look for IODA1 PHBs */ if (of_device_is_compatible(phbn, "ibm,ioda-phb")) - pnv_pci_init_ioda1_phb(phbn); + pnv_pci_init_ioda_phb(phbn, PNV_PHB_IODA1); } } diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 42eee93ca9c3..a11b5a60c91e 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -492,7 +492,7 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) pnv_pci_dma_fallback_setup(hose, pdev); } -/* Fixup wrong class code in p7ioc root complex */ +/* Fixup wrong class code in p7ioc and p8 root complex */ static void pnv_p7ioc_rc_quirk(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; @@ -558,6 +558,10 @@ void __init pnv_pci_init(void) if (!found_ioda) for_each_compatible_node(np, NULL, "ibm,p5ioc2") pnv_pci_init_p5ioc2_hub(np); + + /* Look for ioda2 built-in PHB3's */ + for_each_compatible_node(np, NULL, "ibm,ioda2-phb") + pnv_pci_init_ioda2_phb(np); } /* Setup the linkage between OF nodes and PHBs */ diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 42ddfba79651..f6314d65c4d9 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -4,9 +4,9 @@ struct pci_dn; enum pnv_phb_type { - PNV_PHB_P5IOC2, - PNV_PHB_IODA1, - PNV_PHB_IODA2, + PNV_PHB_P5IOC2 = 0, + PNV_PHB_IODA1 = 1, + PNV_PHB_IODA2 = 2, }; /* Precise PHB model for error management */ @@ -14,6 +14,7 @@ enum pnv_phb_model { PNV_PHB_MODEL_UNKNOWN, PNV_PHB_MODEL_P5IOC2, PNV_PHB_MODEL_P7IOC, + PNV_PHB_MODEL_PHB3, }; #define PNV_PCI_DIAG_BUF_SIZE 4096 @@ -148,6 +149,7 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl, u64 dma_offset); extern void pnv_pci_init_p5ioc2_hub(struct device_node *np); extern void pnv_pci_init_ioda_hub(struct device_node *np); +extern void pnv_pci_init_ioda2_phb(struct device_node *np); #endif /* __POWERNV_PCI_H */ |