diff options
| -rw-r--r-- | include/net/mac80211.h | 4 | ||||
| -rw-r--r-- | net/mac80211/cfg.c | 4 | ||||
| -rw-r--r-- | net/mac80211/mlme.c | 16 | ||||
| -rw-r--r-- | net/mac80211/rate.c | 2 | ||||
| -rw-r--r-- | net/mac80211/tdls.c | 70 | ||||
| -rw-r--r-- | net/mac80211/vht.c | 15 | ||||
| -rw-r--r-- | net/rfkill/core.c | 10 | ||||
| -rw-r--r-- | net/wireless/reg.c | 2 |
8 files changed, 116 insertions, 7 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e3314e516681..bfc569498bfa 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -477,7 +477,9 @@ struct ieee80211_event { * @chandef: Channel definition for this BSS -- the hardware might be * configured a higher bandwidth than this BSS uses, for example. * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation. - * This field is only valid when the channel type is one of the HT types. + * This field is only valid when the channel is a wide HT/VHT channel. + * Note that with TDLS this can be the case (channel is HT, protection must + * be used from this field) even when the BSS association isn't using HT. * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value * implies disabled * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 685ec13ed7c2..17b1fe961c5d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2468,6 +2468,10 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy, rssi_hyst == bss_conf->cqm_rssi_hyst) return 0; + if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER && + !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) + return -EOPNOTSUPP; + bss_conf->cqm_rssi_thold = rssi_thold; bss_conf->cqm_rssi_hyst = rssi_hyst; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 705ef1d040ed..cd7e55e08a23 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4267,6 +4267,8 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband; struct cfg80211_chan_def chandef; int ret; + u32 i; + bool have_80mhz; sband = local->hw.wiphy->bands[cbss->channel->band]; @@ -4317,6 +4319,20 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, } } + /* Allow VHT if at least one channel on the sband supports 80 MHz */ + have_80mhz = false; + for (i = 0; i < sband->n_channels; i++) { + if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_NO_80MHZ)) + continue; + + have_80mhz = true; + break; + } + + if (!have_80mhz) + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; + ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, cbss->channel, ht_cap, ht_oper, vht_oper, diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 9857693b91ec..9ce8883d5f44 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -716,7 +716,7 @@ static bool rate_control_cap_mask(struct ieee80211_sub_if_data *sdata, /* Filter out rates that the STA does not support */ *mask &= sta->supp_rates[sband->band]; - for (i = 0; i < sizeof(mcs_mask); i++) + for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) mcs_mask[i] &= sta->ht_cap.mcs.rx_mask[i]; sta_vht_cap = sta->vht_cap.vht_mcs.rx_mcs_map; diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c index aee701a5649e..4e202d0679b2 100644 --- a/net/mac80211/tdls.c +++ b/net/mac80211/tdls.c @@ -1249,6 +1249,58 @@ static void iee80211_tdls_recalc_chanctx(struct ieee80211_sub_if_data *sdata) mutex_unlock(&local->chanctx_mtx); } +static int iee80211_tdls_have_ht_peers(struct ieee80211_sub_if_data *sdata) +{ + struct sta_info *sta; + bool result = false; + + rcu_read_lock(); + list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) { + if (!sta->sta.tdls || sta->sdata != sdata || !sta->uploaded || + !test_sta_flag(sta, WLAN_STA_AUTHORIZED) || + !test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH) || + !sta->sta.ht_cap.ht_supported) + continue; + result = true; + break; + } + rcu_read_unlock(); + + return result; +} + +static void +iee80211_tdls_recalc_ht_protection(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + bool tdls_ht; + u16 protection = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED | + IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT | + IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT; + u16 opmode; + + /* Nothing to do if the BSS connection uses HT */ + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) + return; + + tdls_ht = (sta && sta->sta.ht_cap.ht_supported) || + iee80211_tdls_have_ht_peers(sdata); + + opmode = sdata->vif.bss_conf.ht_operation_mode; + + if (tdls_ht) + opmode |= protection; + else + opmode &= ~protection; + + if (opmode == sdata->vif.bss_conf.ht_operation_mode) + return; + + sdata->vif.bss_conf.ht_operation_mode = opmode; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT); +} + int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, enum nl80211_tdls_operation oper) { @@ -1274,6 +1326,10 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, return -ENOTSUPP; } + /* protect possible bss_conf changes and avoid concurrency in + * ieee80211_bss_info_change_notify() + */ + sdata_lock(sdata); mutex_lock(&local->mtx); tdls_dbg(sdata, "TDLS oper %d peer %pM\n", oper, peer); @@ -1287,16 +1343,18 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, iee80211_tdls_recalc_chanctx(sdata); - rcu_read_lock(); + mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, peer); if (!sta) { - rcu_read_unlock(); + mutex_unlock(&local->sta_mtx); ret = -ENOLINK; break; } + iee80211_tdls_recalc_ht_protection(sdata, sta); + set_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH); - rcu_read_unlock(); + mutex_unlock(&local->sta_mtx); WARN_ON_ONCE(is_zero_ether_addr(sdata->u.mgd.tdls_peer) || !ether_addr_equal(sdata->u.mgd.tdls_peer, peer)); @@ -1318,6 +1376,11 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, ieee80211_flush_queues(local, sdata, false); ret = sta_info_destroy_addr(sdata, peer); + + mutex_lock(&local->sta_mtx); + iee80211_tdls_recalc_ht_protection(sdata, NULL); + mutex_unlock(&local->sta_mtx); + iee80211_tdls_recalc_chanctx(sdata); break; default: @@ -1335,6 +1398,7 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, &sdata->u.mgd.request_smps_work); mutex_unlock(&local->mtx); + sdata_unlock(sdata); return ret; } diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 834ccdbc74be..ff1c798921a6 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -120,6 +120,7 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; struct ieee80211_sta_vht_cap own_cap; u32 cap_info, i; + bool have_80mhz; memset(vht_cap, 0, sizeof(*vht_cap)); @@ -129,6 +130,20 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; + /* Allow VHT if at least one channel on the sband supports 80 MHz */ + have_80mhz = false; + for (i = 0; i < sband->n_channels; i++) { + if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_NO_80MHZ)) + continue; + + have_80mhz = true; + break; + } + + if (!have_80mhz) + return; + /* * A VHT STA must support 40 MHz, but if we verify that here * then we break a few things - some APs (e.g. Netgear R6300v2 diff --git a/net/rfkill/core.c b/net/rfkill/core.c index f12149a29cb1..b41e9ea2ffff 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -341,7 +341,15 @@ static void __rfkill_switch_all(const enum rfkill_type type, bool blocked) { struct rfkill *rfkill; - rfkill_global_states[type].cur = blocked; + if (type == RFKILL_TYPE_ALL) { + int i; + + for (i = 0; i < NUM_RFKILL_TYPES; i++) + rfkill_global_states[i].cur = blocked; + } else { + rfkill_global_states[type].cur = blocked; + } + list_for_each_entry(rfkill, &rfkill_list, node) { if (rfkill->type != type && type != RFKILL_TYPE_ALL) continue; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b144485946f2..2510b231451e 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2625,7 +2625,7 @@ static void restore_regulatory_settings(bool reset_user) * settings, user regulatory settings takes precedence. */ if (is_an_alpha2(alpha2)) - regulatory_hint_user(user_alpha2, NL80211_USER_REG_HINT_USER); + regulatory_hint_user(alpha2, NL80211_USER_REG_HINT_USER); spin_lock(®_requests_lock); list_splice_tail_init(&tmp_reg_req_list, ®_requests_list); |