summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/wimax/i2400m/i2400m-sdio.h7
-rw-r--r--drivers/net/wimax/i2400m/sdio-fw.c109
-rw-r--r--drivers/net/wimax/i2400m/sdio-rx.c47
-rw-r--r--drivers/net/wimax/i2400m/sdio.c18
4 files changed, 101 insertions, 80 deletions
diff --git a/drivers/net/wimax/i2400m/i2400m-sdio.h b/drivers/net/wimax/i2400m/i2400m-sdio.h
index 207172165ba2..9c4e3189f7b5 100644
--- a/drivers/net/wimax/i2400m/i2400m-sdio.h
+++ b/drivers/net/wimax/i2400m/i2400m-sdio.h
@@ -107,6 +107,10 @@ struct i2400ms {
char tx_wq_name[32];
struct dentry *debugfs_dentry;
+
+ wait_queue_head_t bm_wfa_wq;
+ int bm_wait_result;
+ size_t bm_ack_size;
};
@@ -131,4 +135,7 @@ extern ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *,
extern ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *,
struct i2400m_bootrom_header *,
size_t);
+extern void i2400ms_bus_bm_release(struct i2400m *);
+extern int i2400ms_bus_bm_setup(struct i2400m *);
+
#endif /* #ifndef __I2400M_SDIO_H__ */
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
index 3487205d8f50..7d6ec0f475f8 100644
--- a/drivers/net/wimax/i2400m/sdio-fw.c
+++ b/drivers/net/wimax/i2400m/sdio-fw.c
@@ -46,17 +46,24 @@
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
* - SDIO rehash for changes in the bus-driver model
*
+ * Dirk Brandewie <dirk.j.brandewie@intel.com>
+ * - Make it IRQ based, not polling
+ *
* THE PROCEDURE
*
* See fw.c for the generic description of this procedure.
*
* This file implements only the SDIO specifics. It boils down to how
* to send a command and waiting for an acknowledgement from the
- * device. We do polled reads.
+ * device.
+ *
+ * All this code is sequential -- all i2400ms_bus_bm_*() functions are
+ * executed in the same thread, except i2400ms_bm_irq() [on its own by
+ * the SDIO driver]. This makes it possible to avoid locking.
*
* COMMAND EXECUTION
*
- * THe generic firmware upload code will call i2400m_bus_bm_cmd_send()
+ * The generic firmware upload code will call i2400m_bus_bm_cmd_send()
* to send commands.
*
* The SDIO devices expects things in 256 byte blocks, so it will pad
@@ -64,12 +71,15 @@
*
* ACK RECEPTION
*
- * This works in polling mode -- the fw loader says when to wait for
- * data and for that it calls i2400ms_bus_bm_wait_for_ack().
+ * This works in IRQ mode -- the fw loader says when to wait for data
+ * and for that it calls i2400ms_bus_bm_wait_for_ack().
*
- * This will poll the device for data until it is received. We need to
- * receive at least as much bytes as where asked for (although it'll
- * always be a multiple of 256 bytes).
+ * This checks if there is any data available (RX size > 0); if not,
+ * waits for the IRQ handler to notify about it. Once there is data,
+ * it is read and passed to the caller. Doing it this way we don't
+ * need much coordination/locking, and it makes it much more difficult
+ * for an interrupt to be lost and the wait_for_ack() function getting
+ * stuck even when data is pending.
*/
#include <linux/mmc/sdio_func.h>
#include "i2400m-sdio.h"
@@ -78,6 +88,7 @@
#define D_SUBMODULE fw
#include "sdio-debug-levels.h"
+
/*
* Send a boot-mode command to the SDIO function
*
@@ -139,7 +150,7 @@ error_too_big:
/*
- * Read an ack from the device's boot-mode (polling)
+ * Read an ack from the device's boot-mode
*
* @i2400m:
* @_ack: pointer to where to store the read data
@@ -150,75 +161,49 @@ error_too_big:
* The ACK for a BM command is always at least sizeof(*ack) bytes, so
* check for that. We don't need to check for device reboots
*
- * NOTE: We do an artificial timeout of 1 sec over the SDIO timeout;
- * this way we have control over it...there is no way that I know
- * of setting an SDIO transaction timeout.
*/
ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
struct i2400m_bootrom_header *ack,
size_t ack_size)
{
- int result;
- ssize_t rx_size;
- u64 timeout;
+ ssize_t result;
struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
+ int size;
BUG_ON(sizeof(*ack) > ack_size);
d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
i2400m, ack, ack_size);
- timeout = get_jiffies_64() + 2 * HZ;
- sdio_claim_host(func);
- while (1) {
- if (time_after64(get_jiffies_64(), timeout)) {
- rx_size = -ETIMEDOUT;
- dev_err(dev, "timeout waiting for ack data\n");
- goto error_timedout;
- }
+ spin_lock(&i2400m->rx_lock);
+ i2400ms->bm_ack_size = -EINPROGRESS;
+ spin_unlock(&i2400m->rx_lock);
- /* Find the RX size, check if it fits or not -- it if
- * doesn't fit, fail, as we have no way to dispose of
- * the extra data. */
- rx_size = __i2400ms_rx_get_size(i2400ms);
- if (rx_size < 0)
- goto error_rx_get_size;
- result = -ENOSPC; /* Check it fits */
- if (rx_size < sizeof(*ack)) {
- rx_size = -EIO;
- dev_err(dev, "HW BUG? received is too small (%zu vs "
- "%zu needed)\n", sizeof(*ack), rx_size);
- goto error_too_small;
- }
- if (rx_size > I2400M_BM_ACK_BUF_SIZE) {
- dev_err(dev, "SW BUG? BM_ACK_BUF is too small (%u vs "
- "%zu needed)\n", I2400M_BM_ACK_BUF_SIZE,
- rx_size);
- goto error_too_small;
- }
+ result = wait_event_timeout(i2400ms->bm_wfa_wq,
+ i2400ms->bm_ack_size != -EINPROGRESS,
+ 2 * HZ);
+ if (result == 0) {
+ result = -ETIMEDOUT;
+ dev_err(dev, "BM: error waiting for an ack\n");
+ goto error_timeout;
+ }
- /* Read it */
- result = sdio_memcpy_fromio(func, i2400m->bm_ack_buf,
- I2400MS_DATA_ADDR, rx_size);
- if (result == -ETIMEDOUT || result == -ETIME)
- continue;
- if (result < 0) {
- dev_err(dev, "BM SDIO receive (%zu B) failed: %d\n",
- rx_size, result);
- goto error_read;
- } else
- break;
+ spin_lock(&i2400m->rx_lock);
+ result = i2400ms->bm_ack_size;
+ BUG_ON(result == -EINPROGRESS);
+ if (result < 0) /* so we exit when rx_release() is called */
+ dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
+ else {
+ size = min(ack_size, i2400ms->bm_ack_size);
+ memcpy(ack, i2400m->bm_ack_buf, size);
}
- rx_size = min((ssize_t)ack_size, rx_size);
- memcpy(ack, i2400m->bm_ack_buf, rx_size);
-error_read:
-error_too_small:
-error_rx_get_size:
-error_timedout:
- sdio_release_host(func);
- d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %ld\n",
- i2400m, ack, ack_size, (long) rx_size);
- return rx_size;
+ i2400ms->bm_ack_size = -EINPROGRESS;
+ spin_unlock(&i2400m->rx_lock);
+
+error_timeout:
+ d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
+ i2400m, ack, ack_size, result);
+ return result;
}
diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c
index a3008b904f7d..321beadf6e47 100644
--- a/drivers/net/wimax/i2400m/sdio-rx.c
+++ b/drivers/net/wimax/i2400m/sdio-rx.c
@@ -69,6 +69,13 @@
#define D_SUBMODULE rx
#include "sdio-debug-levels.h"
+static const __le32 i2400m_ACK_BARKER[4] = {
+ __constant_cpu_to_le32(I2400M_ACK_BARKER),
+ __constant_cpu_to_le32(I2400M_ACK_BARKER),
+ __constant_cpu_to_le32(I2400M_ACK_BARKER),
+ __constant_cpu_to_le32(I2400M_ACK_BARKER)
+};
+
/*
* Read and return the amount of bytes available for RX
@@ -131,25 +138,35 @@ void i2400ms_rx(struct i2400ms *i2400ms)
ret = rx_size;
goto error_get_size;
}
+
ret = -ENOMEM;
skb = alloc_skb(rx_size, GFP_ATOMIC);
if (NULL == skb) {
dev_err(dev, "RX: unable to alloc skb\n");
goto error_alloc_skb;
}
-
ret = sdio_memcpy_fromio(func, skb->data,
I2400MS_DATA_ADDR, rx_size);
if (ret < 0) {
dev_err(dev, "RX: SDIO data read failed: %d\n", ret);
goto error_memcpy_fromio;
}
- /* Check if device has reset */
- if (!memcmp(skb->data, i2400m_NBOOT_BARKER,
- sizeof(i2400m_NBOOT_BARKER))
- || !memcmp(skb->data, i2400m_SBOOT_BARKER,
- sizeof(i2400m_SBOOT_BARKER))) {
+
+ rmb(); /* make sure we get boot_mode from dev_reset_handle */
+ if (i2400m->boot_mode == 1) {
+ spin_lock(&i2400m->rx_lock);
+ i2400ms->bm_ack_size = rx_size;
+ spin_unlock(&i2400m->rx_lock);
+ memcpy(i2400m->bm_ack_buf, skb->data, rx_size);
+ wake_up(&i2400ms->bm_wfa_wq);
+ dev_err(dev, "RX: SDIO boot mode message\n");
+ kfree_skb(skb);
+ } else if (unlikely(!memcmp(skb->data, i2400m_NBOOT_BARKER,
+ sizeof(i2400m_NBOOT_BARKER))
+ || !memcmp(skb->data, i2400m_SBOOT_BARKER,
+ sizeof(i2400m_SBOOT_BARKER)))) {
ret = i2400m_dev_reset_handle(i2400m);
+ dev_err(dev, "RX: SDIO reboot barker\n");
kfree_skb(skb);
} else {
skb_put(skb, rx_size);
@@ -179,7 +196,6 @@ void i2400ms_irq(struct sdio_func *func)
{
int ret;
struct i2400ms *i2400ms = sdio_get_drvdata(func);
- struct i2400m *i2400m = &i2400ms->i2400m;
struct device *dev = &func->dev;
int val;
@@ -194,10 +210,7 @@ void i2400ms_irq(struct sdio_func *func)
goto error_no_irq;
}
sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
- if (WARN_ON(i2400m->boot_mode != 0))
- dev_err(dev, "RX: SW BUG? boot mode and IRQ is up?\n");
- else
- i2400ms_rx(i2400ms);
+ i2400ms_rx(i2400ms);
error_no_irq:
d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
return;
@@ -214,8 +227,15 @@ int i2400ms_rx_setup(struct i2400ms *i2400ms)
int result;
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
+ struct i2400m *i2400m = &i2400ms->i2400m;
d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+
+ init_waitqueue_head(&i2400ms->bm_wfa_wq);
+ spin_lock(&i2400m->rx_lock);
+ i2400ms->bm_wait_result = -EINPROGRESS;
+ spin_unlock(&i2400m->rx_lock);
+
sdio_claim_host(func);
result = sdio_claim_irq(func, i2400ms_irq);
if (result < 0) {
@@ -245,8 +265,13 @@ void i2400ms_rx_release(struct i2400ms *i2400ms)
int result;
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
+ struct i2400m *i2400m = &i2400ms->i2400m;
d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+ spin_lock(&i2400m->rx_lock);
+ i2400ms->bm_ack_size = -EINTR;
+ spin_unlock(&i2400m->rx_lock);
+ wake_up_all(&i2400ms->bm_wfa_wq);
sdio_claim_host(func);
sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result);
sdio_release_irq(func);
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 74de174a4c44..2538825d1c66 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -156,19 +156,14 @@ int i2400ms_bus_dev_start(struct i2400m *i2400m)
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
msleep(200);
- result = i2400ms_rx_setup(i2400ms);
- if (result < 0)
- goto error_rx_setup;
result = i2400ms_tx_setup(i2400ms);
if (result < 0)
goto error_tx_setup;
d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
return result;
- i2400ms_tx_release(i2400ms);
error_tx_setup:
- i2400ms_rx_release(i2400ms);
-error_rx_setup:
+ i2400ms_tx_release(i2400ms);
d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
return result;
}
@@ -182,7 +177,6 @@ void i2400ms_bus_dev_stop(struct i2400m *i2400m)
struct device *dev = &func->dev;
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
- i2400ms_rx_release(i2400ms);
i2400ms_tx_release(i2400ms);
d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
}
@@ -296,6 +290,7 @@ do_bus_reset:
if (i2400m->wimax_dev.net_dev->reg_state == NETREG_REGISTERED)
netif_tx_disable(i2400m->wimax_dev.net_dev);
+ i2400ms_rx_release(i2400ms);
sdio_claim_host(i2400ms->func);
sdio_disable_func(i2400ms->func);
sdio_release_host(i2400ms->func);
@@ -304,6 +299,8 @@ do_bus_reset:
msleep(40);
result = i2400ms_enable_function(i2400ms->func);
+ if (result >= 0)
+ i2400ms_rx_setup(i2400ms);
} else
BUG();
if (result < 0 && rt != I2400M_RT_BUS) {
@@ -449,6 +446,10 @@ int i2400ms_probe(struct sdio_func *func,
goto error_func_enable;
}
+ result = i2400ms_rx_setup(i2400ms);
+ if (result < 0)
+ goto error_rx_setup;
+
result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
if (result < 0) {
dev_err(dev, "cannot setup device: %d\n", result);
@@ -466,6 +467,8 @@ int i2400ms_probe(struct sdio_func *func,
error_debugfs_add:
i2400m_release(i2400m);
error_setup:
+ i2400ms_rx_release(i2400ms);
+error_rx_setup:
sdio_claim_host(func);
sdio_disable_func(func);
sdio_release_host(func);
@@ -488,6 +491,7 @@ void i2400ms_remove(struct sdio_func *func)
d_fnstart(3, dev, "SDIO func %p\n", func);
debugfs_remove_recursive(i2400ms->debugfs_dentry);
+ i2400ms_rx_release(i2400ms);
i2400m_release(i2400m);
sdio_set_drvdata(func, NULL);
sdio_claim_host(func);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 01:04:17 +0000