diff options
223 files changed, 4227 insertions, 1735 deletions
diff --git a/.gitignore b/.gitignore index fb2190c61af0..de6344e15706 100644 --- a/.gitignore +++ b/.gitignore @@ -37,6 +37,7 @@ modules.builtin tags TAGS vmlinux +vmlinuz System.map Module.markers Module.symvers diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 220cc6376ef8..0d07513a67a6 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -177,7 +177,6 @@ read the file /proc/PID/status: CapBnd: ffffffffffffffff voluntary_ctxt_switches: 0 nonvoluntary_ctxt_switches: 1 - Stack usage: 12 kB This shows you nearly the same information you would get if you viewed it with the ps command. In fact, ps uses the proc file system to obtain its @@ -231,7 +230,6 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7) Mems_allowed_list Same as previous, but in "list format" voluntary_ctxt_switches number of voluntary context switches nonvoluntary_ctxt_switches number of non voluntary context switches - Stack usage: stack usage high water mark (round up to page size) .............................................................................. Table 1-3: Contents of the statm files (as of 2.6.8-rc3) diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821 new file mode 100644 index 000000000000..ced8359c50f8 --- /dev/null +++ b/Documentation/hwmon/amc6821 @@ -0,0 +1,102 @@ +Kernel driver amc6821 +===================== + +Supported chips: + Texas Instruments AMC6821 + Prefix: 'amc6821' + Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e + Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html + +Authors: + Tomaz Mertelj <tomaz.mertelj@guest.arnes.si> + + +Description +----------- + +This driver implements support for the Texas Instruments amc6821 chip. +The chip has one on-chip and one remote temperature sensor and one pwm fan +regulator. +The pwm can be controlled either from software or automatically. + +The driver provides the following sensor accesses in sysfs: + +temp1_input ro on-chip temperature +temp1_min rw " +temp1_max rw " +temp1_crit rw " +temp1_min_alarm ro " +temp1_max_alarm ro " +temp1_crit_alarm ro " + +temp2_input ro remote temperature +temp2_min rw " +temp2_max rw " +temp2_crit rw " +temp2_min_alarm ro " +temp2_max_alarm ro " +temp2_crit_alarm ro " +temp2_fault ro " + +fan1_input ro tachometer speed +fan1_min rw " +fan1_max rw " +fan1_fault ro " +fan1_div rw Fan divisor can be either 2 or 4. + +pwm1 rw pwm1 +pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled + by remote temperature, 3=fan controlled by + combination of the on-chip temperature and + remote-sensor temperature, +pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3 +pwm1_auto_point1_pwm ro Hardwired to 0, shared for both + temperature channels. +pwm1_auto_point2_pwm rw This value is shared for both temperature + channels. +pwm1_auto_point3_pwm rw Hardwired to 255, shared for both + temperature channels. + +temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp + which is rw. Below this temperature fan stops. +temp1_auto_point2_temp rw The low-temperature limit of the proportional + range. Below this temperature + pwm1 = pwm1_auto_point2_pwm. It can go from + 0 degree C to 124 degree C in steps of + 4 degree C. Read it out after writing to get + the actual value. +temp1_auto_point3_temp rw Above this temperature fan runs at maximum + speed. It can go from temp1_auto_point2_temp. + It can only have certain discrete values + which depend on temp1_auto_point2_temp and + pwm1_auto_point2_pwm. Read it out after + writing to get the actual value. + +temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and + it defines the passive cooling temperature. + Below this temperature the fan stops in + the closed loop mode. +temp2_auto_point2_temp rw The low-temperature limit of the proportional + range. Below this temperature + pwm1 = pwm1_auto_point2_pwm. It can go from + 0 degree C to 124 degree C in steps + of 4 degree C. + +temp2_auto_point3_temp rw Above this temperature fan runs at maximum + speed. It can only have certain discrete + values which depend on temp2_auto_point2_temp + and pwm1_auto_point2_pwm. Read it out after + writing to get actual value. + + +Module parameters +----------------- + +If your board has a BIOS that initializes the amc6821 correctly, you should +load the module with: init=0. + +If your board BIOS doesn't initialize the chip, or you want +different settings, you can set the following parameters: +init=1, +pwminv: 0 default pwm output, 1 inverts pwm output. + diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 947374977ca5..35cf64d4436d 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -56,10 +56,11 @@ Following this convention is good because: (5) When following the convention, the driver code can use generic code to copy the parameters between user and kernel space. -This table lists ioctls visible from user land for Linux/i386. It contains -most drivers up to 2.3.14, but I know I am missing some. +This table lists ioctls visible from user land for Linux/x86. It contains +most drivers up to 2.6.31, but I know I am missing some. There has been +no attempt to list non-X86 architectures or ioctls from drivers/staging/. -Code Seq# Include File Comments +Code Seq#(hex) Include File Comments ======================================================== 0x00 00-1F linux/fs.h conflict! 0x00 00-1F scsi/scsi_ioctl.h conflict! @@ -69,119 +70,228 @@ Code Seq# Include File Comments 0x03 all linux/hdreg.h 0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. 0x06 all linux/lp.h -0x09 all linux/md.h +0x09 all linux/raid/md_u.h +0x10 00-0F drivers/char/s390/vmcp.h 0x12 all linux/fs.h linux/blkpg.h 0x1b all InfiniBand Subsystem <http://www.openib.org/> 0x20 all drivers/cdrom/cm206.h 0x22 all scsi/sg.h '#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem +'$' 00-0F linux/perf_counter.h, linux/perf_event.h '1' 00-1F <linux/timepps.h> PPS kit from Ulrich Windl <ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/> +'2' 01-04 linux/i2o.h +'3' 00-0F drivers/s390/char/raw3270.h conflict! +'3' 00-1F linux/suspend_ioctls.h conflict! + and kernel/power/user.c '8' all SNP8023 advanced NIC card <mailto:mcr@solidum.com> -'A' 00-1F linux/apm_bios.h +'@' 00-0F linux/radeonfb.h conflict! +'@' 00-0F drivers/video/aty/aty128fb.c conflict! +'A' 00-1F linux/apm_bios.h conflict! +'A' 00-0F linux/agpgart.h conflict! + and drivers/char/agp/compat_ioctl.h +'A' 00-7F sound/asound.h conflict! +'B' 00-1F linux/cciss_ioctl.h conflict! +'B' 00-0F include/linux/pmu.h conflict! 'B' C0-FF advanced bbus <mailto:maassen@uni-freiburg.de> -'C' all linux/soundcard.h +'C' all linux/soundcard.h conflict! +'C' 01-2F linux/capi.h conflict! +'C' F0-FF drivers/net/wan/cosa.h conflict! 'D' all arch/s390/include/asm/dasd.h -'E' all linux/input.h -'F' all linux/fb.h -'H' all linux/hiddev.h -'I' all linux/isdn.h +'D' 40-5F drivers/scsi/dpt/dtpi_ioctl.h +'D' 05 drivers/scsi/pmcraid.h +'E' all linux/input.h conflict! +'E' 00-0F xen/evtchn.h conflict! +'F' all linux/fb.h conflict! +'F' 01-02 drivers/scsi/pmcraid.h conflict! +'F' 20 drivers/video/fsl-diu-fb.h conflict! +'F' 20 drivers/video/intelfb/intelfb.h conflict! +'F' 20 linux/ivtvfb.h conflict! +'F' 20 linux/matroxfb.h conflict! +'F' 20 drivers/video/aty/atyfb_base.c conflict! +'F' 00-0F video/da8xx-fb.h conflict! +'F' 80-8F linux/arcfb.h conflict! +'F' DD video/sstfb.h conflict! +'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict! +'G' 00-0F linux/gigaset_dev.h conflict! +'H' 00-7F linux/hiddev.h conflict! +'H' 00-0F linux/hidraw.h conflict! +'H' 00-0F sound/asound.h conflict! +'H' 20-40 sound/asound_fm.h conflict! +'H' 80-8F sound/sfnt_info.h conflict! +'H' 10-8F sound/emu10k1.h conflict! +'H' 10-1F sound/sb16_csp.h conflict! +'H' 10-1F sound/hda_hwdep.h conflict! +'H' 40-4F sound/hdspm.h conflict! +'H' 40-4F sound/hdsp.h conflict! +'H' 90 sound/usb/usx2y/usb_stream.h +'H' C0-F0 net/bluetooth/hci.h conflict! +'H' C0-DF net/bluetooth/hidp/hidp.h conflict! +'H' C0-DF net/bluetooth/cmtp/cmtp.h conflict! +'H' C0-DF net/bluetooth/bnep/bnep.h conflict! +'I' all linux/isdn.h conflict! +'I' 00-0F drivers/isdn/divert/isdn_divert.h conflict! +'I' 40-4F linux/mISDNif.h conflict! 'J' 00-1F drivers/scsi/gdth_ioctl.h 'K' all linux/kd.h -'L' 00-1F linux/loop.h -'L' 20-2F driver/usb/misc/vstusb.h +'L' 00-1F linux/loop.h conflict! +'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict! +'L' 20-2F linux/usb/vstusb.h 'L' E0-FF linux/ppdd.h encrypted disk device driver <http://linux01.gwdg.de/~alatham/ppdd.html> -'M' all linux/soundcard.h +'M' all linux/soundcard.h conflict! +'M' 01-16 mtd/mtd-abi.h conflict! + and drivers/mtd/mtdchar.c +'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h +'M' 00-0F drivers/video/fsl-diu-fb.h conflict! 'N' 00-1F drivers/usb/scanner.h -'O' 00-02 include/mtd/ubi-user.h UBI -'P' all linux/soundcard.h +'O' 00-06 mtd/ubi-user.h UBI +'P' all linux/soundcard.h conflict! +'P' 60-6F sound/sscape_ioctl.h conflict! +'P' 00-0F drivers/usb/class/usblp.c conflict! 'Q' all linux/soundcard.h -'R' 00-1F linux/random.h +'R' 00-1F linux/random.h conflict! +'R' 01 linux/rfkill.h conflict! +'R' 01-0F media/rds.h conflict! +'R' C0-DF net/bluetooth/rfcomm.h 'S' all linux/cdrom.h conflict! 'S' 80-81 scsi/scsi_ioctl.h conflict! 'S' 82-FF scsi/scsi.h conflict! +'S' 00-7F sound/asequencer.h conflict! 'T' all linux/soundcard.h conflict! +'T' 00-AF sound/asound.h conflict! 'T' all arch/x86/include/asm/ioctls.h conflict! -'U' 00-EF linux/drivers/usb/usb.h -'V' all linux/vt.h +'T' C0-DF linux/if_tun.h conflict! +'U' all sound/asound.h conflict! +'U' 00-0F drivers/media/video/uvc/uvcvideo.h conflict! +'U' 00-CF linux/uinput.h conflict! +'U' 00-EF linux/usbdevice_fs.h +'U' C0-CF drivers/bluetooth/hci_uart.h +'V' all linux/vt.h conflict! +'V' all linux/videodev2.h conflict! +'V' C0 linux/ivtvfb.h conflict! +'V' C0 linux/ivtv.h conflict! +'V' C0 media/davinci/vpfe_capture.h conflict! +'V' C0 media/si4713.h conflict! +'V' C0-CF drivers/media/video/mxb.h conflict! 'W' 00-1F linux/watchdog.h conflict! 'W' 00-1F linux/wanrouter.h conflict! -'X' all linux/xfs_fs.h +'W' 00-3F sound/asound.h conflict! +'X' all fs/xfs/xfs_fs.h conflict! + and fs/xfs/linux-2.6/xfs_ioctl32.h + and include/linux/falloc.h + and linux/fs.h +'X' all fs/ocfs2/ocfs_fs.h conflict! +'X' 01 linux/pktcdvd.h conflict! 'Y' all linux/cyclades.h -'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices +'Z' 14-15 drivers/message/fusion/mptctl.h +'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices <mailto:gregkh@suse.de> -'a' all ATM on linux +'a' all linux/atm*.h, linux/sonet.h ATM on linux <http://lrcwww.epfl.ch/linux-atm/magic.html> -'b' 00-FF bit3 vme host bridge +'b' 00-FF conflict! bit3 vme host bridge <mailto:natalia@nikhefk.nikhef.nl> +'b' 00-0F media/bt819.h conflict! +'c' all linux/cm4000_cs.h conflict! 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! -'c' 80-9F arch/s390/include/asm/chsc.h -'c' A0-AF arch/x86/include/asm/msr.h +'c' 00-1F linux/chio.h conflict! +'c' 80-9F arch/s390/include/asm/chsc.h conflict! +'c' A0-AF arch/x86/include/asm/msr.h conflict! 'd' 00-FF linux/char/drm/drm/h conflict! +'d' 02-40 pcmcia/ds.h conflict! +'d' 10-3F drivers/media/video/dabusb.h conflict! +'d' C0-CF drivers/media/video/saa7191.h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! -'e' 00-1F net/irda/irtty.h conflict! -'f' 00-1F linux/ext2_fs.h -'h' 00-7F Charon filesystem +'e' 00-1F drivers/net/irda/irtty-sir.h conflict! +'f' 00-1F linux/ext2_fs.h conflict! +'f' 00-1F linux/ext3_fs.h conflict! +'f' 00-0F fs/jfs/jfs_dinode.h conflict! +'f' 00-0F fs/ext4/ext4.h conflict! +'f' 00-0F linux/fs.h conflict! +'f' 00-0F fs/ocfs2/ocfs2_fs.h conflict! +'g' 00-0F linux/usb/gadgetfs.h +'g' 20-2F linux/usb/g_printer.h +'h' 00-7F conflict! Charon filesystem <mailto:zapman@interlan.net> -'i' 00-3F linux/i2o.h +'h' 00-1F linux/hpet.h conflict! +'i' 00-3F linux/i2o-dev.h conflict! +'i' 0B-1F linux/ipmi.h conflict! +'i' 80-8F linux/i8k.h 'j' 00-3F linux/joystick.h +'k' 00-0F linux/spi/spidev.h conflict! +'k' 00-05 video/kyro.h conflict! 'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system <http://mikonos.dia.unisa.it/tcfs> 'l' 40-7F linux/udf_fs_i.h in development: <http://sourceforge.net/projects/linux-udf/> -'m' 00-09 linux/mmtimer.h +'m' 00-09 linux/mmtimer.h conflict! 'm' all linux/mtio.h conflict! 'm' all linux/soundcard.h conflict! 'm' all linux/synclink.h conflict! +'m' 00-19 drivers/message/fusion/mptctl.h conflict! +'m' 00 drivers/scsi/megaraid/megaraid_ioctl.h conflict! 'm' 00-1F net/irda/irmod.h conflict! -'n' 00-7F linux/ncp_fs.h +'n' 00-7F linux/ncp_fs.h and fs/ncpfs/ioctl.c 'n' 80-8F linux/nilfs2_fs.h NILFS2 -'n' E0-FF video/matrox.h matroxfb +'n' E0-FF linux/matroxfb.h matroxfb 'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 -'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps) -'o' 40-41 include/mtd/ubi-user.h UBI -'o' 01-A1 include/linux/dvb/*.h DVB +'o' 00-03 mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps) +'o' 40-41 mtd/ubi-user.h UBI +'o' 01-A1 linux/dvb/*.h DVB 'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) +'p' 00-1F linux/rtc.h conflict! 'p' 00-3F linux/mc146818rtc.h conflict! 'p' 40-7F linux/nvram.h -'p' 80-9F user-space parport +'p' 80-9F linux/ppdev.h user-space parport <mailto:tim@cyberelk.net> -'p' a1-a4 linux/pps.h LinuxPPS +'p' A1-A4 linux/pps.h LinuxPPS <mailto:giometti@linux.it> 'q' 00-1F linux/serio.h -'q' 80-FF Internet PhoneJACK, Internet LineJACK - <http://www.quicknet.net> -'r' 00-1F linux/msdos_fs.h +'q' 80-FF linux/telephony.h Internet PhoneJACK, Internet LineJACK + linux/ixjuser.h <http://www.quicknet.net> +'r' 00-1F linux/msdos_fs.h and fs/fat/dir.c 's' all linux/cdk.h 't' 00-7F linux/if_ppp.h 't' 80-8F linux/isdn_ppp.h +'t' 90 linux/toshiba.h 'u' 00-1F linux/smb_fs.h -'v' 00-1F linux/ext2_fs.h conflict! 'v' all linux/videodev.h conflict! +'v' 00-1F linux/ext2_fs.h conflict! +'v' 00-1F linux/fs.h conflict! +'v' 00-0F linux/sonypi.h conflict! +'v' C0-CF drivers/media/video/ov511.h conflict! +'v' C0-DF media/pwc-ioctl.h conflict! +'v' C0-FF linux/meye.h conflict! +'v' C0-CF drivers/media/video/zoran/zoran.h conflict! +'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict! 'w' all CERN SCI driver 'y' 00-1F packet based user level communications <mailto:zapman@interlan.net> -'z' 00-3F CAN bus card +'z' 00-3F CAN bus card conflict! <mailto:hdstich@connectu.ulm.circular.de> -'z' 40-7F CAN bus card +'z' 40-7F CAN bus card conflict! <mailto:oe@port.de> +'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict! 0x80 00-1F linux/fb.h 0x81 00-1F linux/videotext.h +0x88 00-3F media/ovcamchip.h 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range +0x89 E0-EF linux/dn.h PROTOPRIVATE range 0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range 0x8B all linux/wireless.h 0x8C 00-3F WiNRADiO driver <http://www.proximity.com.au/~brian/winradio/> 0x90 00 drivers/cdrom/sbpcd.h +0x92 00-0F drivers/usb/mon/mon_bin.c 0x93 60-7F linux/auto_fs.h +0x94 all fs/btrfs/ioctl.h 0x99 00-0F 537-Addinboard driver <mailto:buk@buks.ipn.de> 0xA0 all linux/sdp/sdp.h Industrial Device Project @@ -192,17 +302,22 @@ Code Seq# Include File Comments 0xAB 00-1F linux/nbd.h 0xAC 00-1F linux/raw.h 0xAD 00 Netfilter device in development: - <mailto:rusty@rustcorp.com.au> + <mailto:rusty@rustcorp.com.au> 0xAE all linux/kvm.h Kernel-based Virtual Machine <mailto:kvm@vger.kernel.org> 0xB0 all RATIO devices in development: <mailto:vgo@ratio.de> 0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca> +0xC0 00-0F linux/usb/iowarrior.h 0xCB 00-1F CBM serial IEC bus in development: <mailto:michael.klein@puffin.lb.shuttle.de> +0xCD 01 linux/reiserfs_fs.h +0xCF 02 fs/cifs/ioctl.c +0xDB 00-0F drivers/char/mwave/mwavepub.h 0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ <mailto:aherrman@de.ibm.com> -0xF3 00-3F video/sisfb.h sisfb (in development) +0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development) <mailto:thomas@winischhofer.net> 0xF4 00-1F video/mbxfb.h mbxfb <mailto:raph@8d.com> +0xFD all linux/dm-ioctl.h diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 348b9e5e28fc..27a52b35d55b 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -214,11 +214,13 @@ The format of the block comment is like this: * (section header: (section description)? )* (*)?*/ -The short function description ***cannot be multiline***, but the other -descriptions can be (and they can contain blank lines). If you continue -that initial short description onto a second line, that second line will -appear further down at the beginning of the description section, which is -almost certainly not what you had in mind. +All "description" text can span multiple lines, although the +function_name & its short description are traditionally on a single line. +Description text may also contain blank lines (i.e., lines that contain +only a "*"). + +"section header:" names must be unique per function (or struct, +union, typedef, enum). Avoid putting a spurious blank line after the function name, or else the description will be repeated! diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt index 5b1d23d604c5..d299ff31df57 100644 --- a/Documentation/trace/ring-buffer-design.txt +++ b/Documentation/trace/ring-buffer-design.txt @@ -33,9 +33,9 @@ head_page - a pointer to the page that the reader will use next tail_page - a pointer to the page that will be written to next -commit_page - a pointer to the page with the last finished non nested write. +commit_page - a pointer to the page with the last finished non-nested write. -cmpxchg - hardware assisted atomic transaction that performs the following: +cmpxchg - hardware-assisted atomic transaction that performs the following: A = B iff previous A == C @@ -52,15 +52,15 @@ The Generic Ring Buffer The ring buffer can be used in either an overwrite mode or in producer/consumer mode. -Producer/consumer mode is where the producer were to fill up the +Producer/consumer mode is where if the producer were to fill up the buffer before the consumer could free up anything, the producer will stop writing to the buffer. This will lose most recent events. -Overwrite mode is where the produce were to fill up the buffer +Overwrite mode is where if the producer were to fill up the buffer before the consumer could free up anything, the producer will overwrite the older data. This will lose the oldest events. -No two writers can write at the same time (on the same per cpu buffer), +No two writers can write at the same time (on the same per-cpu buffer), but a writer may interrupt another writer, but it must finish writing before the previous writer may continue. This is very important to the algorithm. The writers act like a "stack". The way interrupts works @@ -79,16 +79,16 @@ the interrupt doing a write as well. Readers can happen at any time. But no two readers may run at the same time, nor can a reader preempt/interrupt another reader. A reader -can not preempt/interrupt a writer, but it may read/consume from the +cannot preempt/interrupt a writer, but it may read/consume from the buffer at the same time as a writer is writing, but the reader must be on another processor to do so. A reader may read on its own processor and can be preempted by a writer. -A writer can preempt a reader, but a reader can not preempt a writer. +A writer can preempt a reader, but a reader cannot preempt a writer. But a reader can read the buffer at the same time (on another processor) as a writer. -The ring buffer is made up of a list of pages held together by a link list. +The ring buffer is made up of a list of pages held together by a linked list. At initialization a reader page is allocated for the reader that is not part of the ring buffer. @@ -102,7 +102,7 @@ the head page. The reader has its own page to use. At start up time, this page is allocated but is not attached to the list. When the reader wants -to read from the buffer, if its page is empty (like it is on start up) +to read from the buffer, if its page is empty (like it is on start-up), it will swap its page with the head_page. The old reader page will become part of the ring buffer and the head_page will be removed. The page after the inserted page (old reader_page) will become the @@ -206,7 +206,7 @@ The main pointers: commit page - the page that last finished a write. -The commit page only is updated by the outer most writer in the +The commit page only is updated by the outermost writer in the writer stack. A writer that preempts another writer will not move the commit page. @@ -281,7 +281,7 @@ with the previous write. The commit pointer points to the last write location that was committed without preempting another write. When a write that preempted another write is committed, it only becomes a pending commit -and will not be a full commit till all writes have been committed. +and will not be a full commit until all writes have been committed. The commit page points to the page that has the last full commit. The tail page points to the page with the last write (before @@ -292,7 +292,7 @@ be several pages ahead. If the tail page catches up to the commit page then no more writes may take place (regardless of the mode of the ring buffer: overwrite and produce/consumer). -The order of pages are: +The order of pages is: head page commit page @@ -311,7 +311,7 @@ Possible scenario: There is a special case that the head page is after either the commit page and possibly the tail page. That is when the commit (and tail) page has been swapped with the reader page. This is because the head page is always -part of the ring buffer, but the reader page is not. When ever there +part of the ring buffer, but the reader page is not. Whenever there has been less than a full page that has been committed inside the ring buffer, and a reader swaps out a page, it will be swapping out the commit page. @@ -338,7 +338,7 @@ and a reader swaps out a page, it will be swapping out the commit page. In this case, the head page will not move when the tail and commit move back into the ring buffer. -The reader can not swap a page into the ring buffer if the commit page +The reader cannot swap a page into the ring buffer if the commit page is still on that page. If the read meets the last commit (real commit not pending or reserved), then there is nothing more to read. The buffer is considered empty until another full commit finishes. @@ -395,7 +395,7 @@ The main idea behind the lockless algorithm is to combine the moving of the head_page pointer with the swapping of pages with the reader. State flags are placed inside the pointer to the page. To do this, each page must be aligned in memory by 4 bytes. This will allow the 2 -least significant bits of the address to be used as flags. Since +least significant bits of the address to be used as flags, since they will always be zero for the address. To get the address, simply mask out the flags. @@ -460,7 +460,7 @@ When the reader tries to swap the page with the ring buffer, it will also use cmpxchg. If the flag bit in the pointer to the head page does not have the HEADER flag set, the compare will fail and the reader will need to look for the new head page and try again. -Note, the flag UPDATE and HEADER are never set at the same time. +Note, the flags UPDATE and HEADER are never set at the same time. The reader swaps the reader page as follows: @@ -539,7 +539,7 @@ updated to the reader page. | +-----------------------------+ | +------------------------------------+ -Another important point. The page that the reader page points back to +Another important point: The page that the reader page points back to by its previous pointer (the one that now points to the new head page) never points back to the reader page. That is because the reader page is not part of the ring buffer. Traversing the ring buffer via the next pointers @@ -572,7 +572,7 @@ not be able to swap the head page from the buffer, nor will it be able to move the head page, until the writer is finished with the move. This eliminates any races that the reader can have on the writer. The reader -must spin, and this is why the reader can not preempt the writer. +must spin, and this is why the reader cannot preempt the writer. tail page | @@ -659,9 +659,9 @@ before pushing the head page. If it is, then it can be assumed that the tail page wrapped the buffer, and we must drop new writes. This is not a race condition, because the commit page can only be moved -by the outter most writer (the writer that was preempted). +by the outermost writer (the writer that was preempted). This means that the commit will not move while a writer is moving the -tail page. The reader can not swap the reader page if it is also being +tail page. The reader cannot swap the reader page if it is also being used as the commit page. The reader can simply check that the commit is off the reader page. Once the commit page leaves the reader page it will never go back on it unless a reader does another swap with the @@ -733,7 +733,7 @@ The write converts the head page pointer to UPDATE. --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -But if a nested writer preempts here. It will see that the next +But if a nested writer preempts here, it will see that the next page is a head page, but it is also nested. It will detect that it is nested and will save that information. The detection is the fact that it sees the UPDATE flag instead of a HEADER or NORMAL @@ -761,7 +761,7 @@ to NORMAL. --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -After the nested writer finishes, the outer most writer will convert +After the nested writer finishes, the outermost writer will convert the UPDATE pointer to NORMAL. @@ -812,7 +812,7 @@ head page. +---+ +---+ +---+ +---+ The nested writer moves the tail page forward. But does not set the old -update page to NORMAL because it is not the outer most writer. +update page to NORMAL because it is not the outermost writer. tail page | @@ -892,7 +892,7 @@ It will return to the first writer. --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -The first writer can not know atomically test if the tail page moved +The first writer cannot know atomically if the tail page moved while it updates the HEAD page. It will then update the head page to what it thinks is the new head page. @@ -923,9 +923,9 @@ if the tail page is either where it use to be or on the next page: --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -If tail page != A and tail page does not equal B, then it must reset the -pointer back to NORMAL. The fact that it only needs to worry about -nested writers, it only needs to check this after setting the HEAD page. +If tail page != A and tail page != B, then it must reset the pointer +back to NORMAL. The fact that it only needs to worry about nested +writers means that it only needs to check this after setting the HEAD page. (first writer) @@ -939,7 +939,7 @@ nested writers, it only needs to check this after setting the HEAD page. +---+ +---+ +---+ +---+ Now the writer can update the head page. This is also why the head page must -remain in UPDATE and only reset by the outer most writer. This prevents +remain in UPDATE and only reset by the outermost writer. This prevents the reader from seeing the incorrect head page. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 233a222752c0..c2238cd474c7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -18,6 +18,8 @@ config ARM select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZO help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -688,6 +690,7 @@ config ARCH_DAVINCI select HAVE_IDE select COMMON_CLKDEV select GENERIC_ALLOCATOR + select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's DaVinci platform. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index ce39dc540085..2d4d88ba73bf 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -63,8 +63,12 @@ endif SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ -targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \ - head.o misc.o $(OBJS) +suffix_$(CONFIG_KERNEL_GZIP) = gzip +suffix_$(CONFIG_KERNEL_LZO) = lzo + +targets := vmlinux vmlinux.lds \ + piggy.$(suffix_y) piggy.$(suffix_y).o \ + font.o font.c head.o misc.o $(OBJS) ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) @@ -87,22 +91,34 @@ endif ifneq ($(PARAMS_PHYS),) LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS) endif -LDFLAGS_vmlinux += -p --no-undefined -X \ - $(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T +# ? +LDFLAGS_vmlinux += -p +# Report unresolved symbol references +LDFLAGS_vmlinux += --no-undefined +# Delete all temporary local symbols +LDFLAGS_vmlinux += -X +# Next argument is a linker script +LDFLAGS_vmlinux += -T + +# For __aeabi_uidivmod +lib1funcs = $(obj)/lib1funcs.o + +$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE + $(call cmd,shipped) # Don't allow any static data in misc.o, which # would otherwise mess up our GOT table CFLAGS_misc.o := -Dstatic= -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \ - $(addprefix $(obj)/, $(OBJS)) FORCE +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ + $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE $(call if_changed,ld) @: -$(obj)/piggy.gz: $(obj)/../Image FORCE - $(call if_changed,gzip) +$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE + $(call if_changed,$(suffix_y)) -$(obj)/piggy.o: $(obj)/piggy.gz FORCE +$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE CFLAGS_font.o := -Dstatic= diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 17153b54613b..7e0fe4d42c7b 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -18,10 +18,15 @@ unsigned int __machine_arch_type; +#define _LINUX_STRING_H_ + #include <linux/compiler.h> /* for inline */ #include <linux/types.h> /* for size_t */ #include <linux/stddef.h> /* for NULL */ #include <asm/string.h> +#include <linux/linkage.h> + +#include <asm/unaligned.h> #ifdef STANDALONE_DEBUG #define putstr printf @@ -188,34 +193,8 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src, /* * gzip delarations */ -#define OF(args) args #define STATIC static -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - /* Diagnostic functions */ #ifdef DEBUG # define Assert(cond,msg) {if(!(cond)) error(msg);} @@ -233,24 +212,20 @@ static unsigned outcnt; /* bytes in output buffer */ # define Tracecv(c,x) #endif -static int fill_inbuf(void); -static void flush_window(void); static void error(char *m); extern char input_data[]; extern char input_data_end[]; -static uch *output_data; -static ulg output_ptr; -static ulg bytes_out; +static unsigned char *output_data; +static unsigned long output_ptr; static void error(char *m); static void putstr(const char *); -extern int end; -static ulg free_mem_ptr; -static ulg free_mem_end_ptr; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; #ifdef STANDALONE_DEBUG #define NO_INFLATE_MALLOC @@ -258,46 +233,13 @@ static ulg free_mem_end_ptr; #define ARCH_HAS_DECOMP_WDOG -#include "../../../../lib/inflate.c" - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -int fill_inbuf(void) -{ - if (insize != 0) - error("ran out of input data"); - - inbuf = input_data; - insize = &input_data_end[0] - &input_data[0]; - - inptr = 1; - return inbuf[0]; -} +#ifdef CONFIG_KERNEL_GZIP +#include "../../../../lib/decompress_inflate.c" +#endif -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -void flush_window(void) -{ - ulg c = crc; - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; - putstr("."); -} +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif #ifndef arch_error #define arch_error(x) @@ -314,22 +256,33 @@ static void error(char *x) while(1); /* Halt */ } +asmlinkage void __div0(void) +{ + error("Attempting division by 0!"); +} + #ifndef STANDALONE_DEBUG -ulg -decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, - int arch_id) +unsigned long +decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, + unsigned long free_mem_ptr_end_p, + int arch_id) { - output_data = (uch *)output_start; /* Points to kernel start */ + unsigned char *tmp; + + output_data = (unsigned char *)output_start; free_mem_ptr = free_mem_ptr_p; free_mem_end_ptr = free_mem_ptr_end_p; __machine_arch_type = arch_id; arch_decomp_setup(); - makecrc(); + tmp = (unsigned char *) (((unsigned long)input_data_end) - 4); + output_ptr = get_unaligned_le32(tmp); + putstr("Uncompressing Linux..."); - gunzip(); + decompress(input_data, input_data_end - input_data, + NULL, NULL, output_data, NULL, error); putstr(" done, booting the kernel.\n"); return output_ptr; } @@ -341,11 +294,10 @@ int main() { output_data = output_buffer; - makecrc(); putstr("Uncompressing Linux..."); - gunzip(); + decompress(input_data, input_data_end - input_data, + NULL, NULL, output_data, NULL, error); putstr("done.\n"); return 0; } #endif - diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S new file mode 100644 index 000000000000..a68adf91a165 --- /dev/null +++ b/arch/arm/boot/compressed/piggy.gzip.S @@ -0,0 +1,6 @@ + .section .piggydata,#alloc + .globl input_data +input_data: + .incbin "arch/arm/boot/compressed/piggy.gzip" + .globl input_data_end +input_data_end: diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.lzo.S index 54c951800ebd..a425ad95959a 100644 --- a/arch/arm/boot/compressed/piggy.S +++ b/arch/arm/boot/compressed/piggy.lzo.S @@ -1,6 +1,6 @@ .section .piggydata,#alloc .globl input_data input_data: - .incbin "arch/arm/boot/compressed/piggy.gz" + .incbin "arch/arm/boot/compressed/piggy.lzo" .globl input_data_end input_data_end: diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a9b650dcc172..077ecf4fecda 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -236,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { static struct vpfe_config vpfe_cfg = { .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .i2c_adapter_id = 1, .sub_devs = vpfe_sub_devs, .card_name = "DM355 EVM", .ccdc = "DM355 CCDC", diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 289fe1b7d25a..b476395d2cd4 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -192,7 +192,11 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; -#ifdef CONFIG_KEYBOARD_DAVINCI +static int dm365evm_keyscan_enable(struct device *dev) +{ + return davinci_cfg_reg(DM365_KEYSCAN); +} + static unsigned short dm365evm_keymap[] = { KEY_KP2, KEY_LEFT, @@ -214,6 +218,7 @@ static unsigned short dm365evm_keymap[] = { }; static struct davinci_ks_platform_data dm365evm_ks_data = { + .device_enable = dm365evm_keyscan_enable, .keymap = dm365evm_keymap, .keymapsize = ARRAY_SIZE(dm365evm_keymap), .rep = 1, @@ -222,7 +227,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = { .interval = 0x2, .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4, }; -#endif static int cpld_mmc_get_cd(int module) { @@ -511,10 +515,7 @@ static __init void dm365_evm_init(void) dm365_init_asp(&dm365_evm_snd_data); dm365_init_rtc(); - -#ifdef CONFIG_KEYBOARD_DAVINCI dm365_init_ks(&dm365evm_ks_data); -#endif } static __init void dm365_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index fd0398bc6db3..e9612cf727b7 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -247,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { static struct vpfe_config vpfe_cfg = { .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .i2c_adapter_id = 1, .sub_devs = vpfe_sub_devs, .card_name = "DM6446 EVM", .ccdc = "DM6446 CCDC", diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 52b287cf3a42..37311d1830eb 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -81,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type) return 0; } +/* + * Faking this allows us to to work with suspend functions of + * generic drivers which call {enable|disable}_irq_wake for + * wake up interrupt sources (eg RTC on DA850). + */ +static int cp_intc_set_wake(unsigned int irq, unsigned int on) +{ + return 0; +} + static struct irq_chip cp_intc_irq_chip = { .name = "cp_intc", .ack = cp_intc_ack_irq, .mask = cp_intc_mask_irq, .unmask = cp_intc_unmask_irq, .set_type = cp_intc_set_irq_type, + .set_wake = cp_intc_set_wake, }; void __init cp_intc_init(void __iomem *base, unsigned short num_irq, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index dd2d32c4ce86..a5105f03fd86 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -481,11 +481,18 @@ static struct platform_device da8xx_rtc_device = { int da8xx_register_rtc(void) { + int ret; + /* Unlock the rtc's registers */ __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c)); __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70)); - return platform_device_register(&da8xx_rtc_device); + ret = platform_device_register(&da8xx_rtc_device); + if (!ret) + /* Atleast on DA850, RTC is a wakeup source */ + device_init_wakeup(&da8xx_rtc_device.dev, true); + + return ret; } static struct resource da8xx_cpuidle_resources[] = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 2ec619ec1657..f53735cb922e 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -993,7 +993,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata) void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) { - davinci_cfg_reg(DM365_KEYSCAN); dm365_ks_device.dev.platform_data = pdata; platform_device_register(&dm365_ks_device); } diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 8f49b2b12608..b22dec4abf78 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -24,8 +24,6 @@ #include "common.h" -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ GPIO47_UART2_RXD, diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c index 03dbbdc98955..8bcc1a5b8829 100644 --- a/arch/arm/mach-mx2/mxt_td60.c +++ b/arch/arm/mach-mx2/mxt_td60.c @@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = { PE9_PF_UART3_RXD, PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, - /* UART3 */ - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, - /* UART4 */ - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS, - /* UART5 */ - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS, /* FEC */ PD0_AIN_FEC_TXD0, PD1_AIN_FEC_TXD1, @@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = { .flags = IMXUART_HAVE_RTSCTS, }, { .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, }, }; @@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); - mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); - mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); i2c_register_board_info(0, mxt_td60_i2c_devices, diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index ef26951a5275..6e838b857712 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) }; int __init mx25_clocks_init(unsigned long fref) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 63511de3a559..9fdeea1c083b 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -419,3 +419,22 @@ int __init mxc_register_gpios(void) return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } +static struct resource mx25_fec_resources[] = { + { + .start = MX25_FEC_BASE_ADDR, + .end = MX25_FEC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_FEC, + .end = MX25_INT_FEC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx25_fec_device = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(mx25_fec_resources), + .resource = mx25_fec_resources, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index fe6bf88ad1dd..fe5420fcd11f 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device; extern struct platform_device mxc_i2c_device0; extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; +extern struct platform_device mx25_fec_device; diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index d23ae571c03f..921bc99ea231 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -18,10 +18,11 @@ #include <linux/types.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/smsc911x.h> +#include <linux/fec.h> #include <linux/platform_device.h> #include <mach/hardware.h> @@ -35,16 +36,57 @@ #include <mach/mx25.h> #include <mach/mxc_nand.h> #include "devices.h" -#include <mach/iomux-v3.h> +#include <mach/iomux.h> static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; +static struct pad_desc mx25pdk_pads[] = { + MX25_PAD_FEC_MDC__FEC_MDC, + MX25_PAD_FEC_MDIO__FEC_MDIO, + MX25_PAD_FEC_TDATA0__FEC_TDATA0, + MX25_PAD_FEC_TDATA1__FEC_TDATA1, + MX25_PAD_FEC_TX_EN__FEC_TX_EN, + MX25_PAD_FEC_RDATA0__FEC_RDATA0, + MX25_PAD_FEC_RDATA1__FEC_RDATA1, + MX25_PAD_FEC_RX_DV__FEC_RX_DV, + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ + MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ +}; + +static struct fec_platform_data mx25_fec_pdata = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +#define FEC_ENABLE_GPIO 35 +#define FEC_RESET_B_GPIO 104 + +static void __init mx25pdk_fec_reset(void) +{ + gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable"); + gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset"); + + gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */ + gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */ + udelay(2); + + /* turn on PHY power and lift reset */ + gpio_set_value(FEC_ENABLE_GPIO, 1); + gpio_set_value(FEC_RESET_B_GPIO, 1); +} + static void __init mx25pdk_init(void) { + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, + ARRAY_SIZE(mx25pdk_pads)); + mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); + + mx25pdk_fec_reset(); + mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); } static void __init mx25pdk_timer_init(void) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index ea8ed109a7c2..28294416b0af 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -49,6 +49,7 @@ config MACH_PCM037_EET config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -63,7 +64,7 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 - select MXC_ULPI + select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index bedf5b8d976a..6858a4f9806c 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = { .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), .length = AIPS2_SIZE, .type = MT_DEVICE_NONSHARED + }, { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_DEVICE_NONSHARED }, }; diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 0497c152be18..3e7bafa2ddbb 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -494,11 +494,6 @@ static void mxc_init_i2c(void) */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE / 2, diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index def6b6736594..789b20d1730f 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = { * USB */ +#if defined(CONFIG_USB_ULPI) #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; +#endif /* * NOR flash @@ -212,11 +214,6 @@ static struct platform_device physmap_flash_device = { */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE, @@ -261,11 +258,13 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_spi_device1, &spi1_pdata); spi_register_board_info(&mc13783_spi_dev, 1); +#if defined(CONFIG_USB_ULPI) /* USB */ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 8fc624f141cb..438428eaf769 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mx31_usbh1, &usbh1_pdata); + return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } /* diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 85184a35e674..1f44b9ccbb0f 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mx31_usbh1, &usbh1_pdata); + return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } /* diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index b70529145936..cfd605d078ec 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; +#if defined(CONFIG_USB_ULPI) + #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) static int moboard_usbh2_hw_init(struct platform_device *pdev) @@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); - return mxc_register_device(&mx31_usbh2, &usbh2_pdata); + return mxc_register_device(&mxc_usbh2, &usbh2_pdata); } +#else +static inline int moboard_usbh2_init(void) { return 0; } +#endif static struct gpio_led mx31moboard_leds[] = { diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index 0f7a2f06bc2d..18715f1aa7eb 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void) */ static struct map_desc mx31pdk_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED, - }, { .virtual = CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS5_BASE_ADDR), .length = CS5_SIZE, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 6cbaabedf386..5be396917c99 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on) return 0; } -static struct i2c_board_info pcm037_i2c_2_devices[] = { +static struct i2c_board_info pcm037_i2c_camera[] = { { I2C_BOARD_INFO("mt9t031", 0x5d), + }, { + I2C_BOARD_INFO("mt9v022", 0x48), }, }; -static struct soc_camera_link iclink = { +static struct soc_camera_link iclink_mt9v022 = { + .bus_id = 0, /* Must match with the camera ID */ + .board_info = &pcm037_i2c_camera[1], + .i2c_adapter_id = 2, + .module_name = "mt9v022", +}; + +static struct soc_camera_link iclink_mt9t031 = { .bus_id = 0, /* Must match with the camera ID */ .power = pcm037_camera_power, - .board_info = &pcm037_i2c_2_devices[0], + .board_info = &pcm037_i2c_camera[0], .i2c_adapter_id = 2, .module_name = "mt9t031", }; @@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = { } }; -static struct platform_device pcm037_camera = { +static struct platform_device pcm037_mt9t031 = { .name = "soc-camera-pdrv", .id = 0, .dev = { - .platform_data = &iclink, + .platform_data = &iclink_mt9t031, + }, +}; + +static struct platform_device pcm037_mt9v022 = { + .name = "soc-camera-pdrv", + .id = 1, + .dev = { + .platform_data = &iclink_mt9v022, }, }; @@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size) static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, - &pcm037_camera, + &pcm037_mt9t031, + &pcm037_mt9v022, }; static struct ipu_platform_data mx3_ipu_data = { @@ -599,7 +617,7 @@ static void __init mxc_board_init(void) if (!ret) gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); else - iclink.power = NULL; + iclink_mt9t031.power = NULL; if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) mxc_register_device(&mx3_camera, &camera_pdata); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8a0837ea0294..dee92182749b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -37,6 +37,8 @@ config MACH_ZYLONITE320 config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select PXA3xx + select CPU_PXA300 + select CPU_PXA310 select PXA_SSP config MACH_TAVOREVB diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index bf6785adccf4..9edf645368d6 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -8,13 +8,6 @@ /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ -struct platform_mmc_slot { - int gpio_cd; - int gpio_wp; -}; - -extern struct platform_mmc_slot zylonite_mmc_slot[]; - extern int gpio_eth_irq; extern int gpio_debug_led1; extern int gpio_debug_led2; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index f28c1715b910..fa527b258d61 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { GPIO7_MMC1_CLK, GPIO8_MMC1_CMD, GPIO15_GPIO, /* card detect */ + + /* UART3 */ + GPIO107_UART3_CTS, + GPIO108_UART3_RTS, + GPIO109_UART3_TXD, + GPIO110_UART3_RXD, }; static struct resource smc91x_resources[] = { diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index e5eeb3a62d01..c2b938a4d5c9 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = { .init = poodle_mci_init, .setpower = poodle_mci_setpower, .exit = poodle_mci_exit, - .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT, + .gpio_card_detect = POODLE_GPIO_nSD_DETECT, .gpio_card_ro = POODLE_GPIO_nSD_WP, .gpio_power = -1, }; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 5b986a8bd9e6..75f2a37f945d 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -25,6 +25,7 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/apm-emulation.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -626,8 +627,27 @@ static void zeus_power_off(void) pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); } -int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, - unsigned ngpio, void *context) +#ifdef CONFIG_APM_EMULATION +static void zeus_get_power_status(struct apm_power_info *info) +{ + /* Power supply is always present */ + info->ac_line_status = APM_AC_ONLINE; + info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT; +} + +static inline void zeus_setup_apm(void) +{ + apm_get_power_status = zeus_get_power_status; +} +#else +static inline void zeus_setup_apm(void) +{ +} +#endif + +static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, + unsigned ngpio, void *context) { int i; u8 pcb_info = 0; @@ -726,9 +746,18 @@ static mfp_cfg_t zeus_pin_config[] __initdata = { GPIO99_GPIO, /* CF RDY */ }; +/* + * DM9k MSCx settings: SRAM, 16 bits + * 17 cycles delay first access + * 5 cycles delay next access + * 13 cycles recovery time + * faster device + */ +#define DM9K_MSC_VALUE 0xe4c9 + static void __init zeus_init(void) { - u16 dm9000_msc = 0xe279; + u16 dm9000_msc = DM9K_MSC_VALUE; system_rev = __raw_readw(ZEUS_CPLD_VERSION); pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f)); @@ -738,6 +767,7 @@ static void __init zeus_init(void) MSC1 = (MSC1 & 0xffff0000) | dm9000_msc; pm_power_off = zeus_power_off; + zeus_setup_apm(); pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config)); diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index b66e9e2d06e7..2b4043c04d0c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -36,9 +36,6 @@ #include "devices.h" #include "generic.h" -#define MAX_SLOTS 3 -struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; - int gpio_eth_irq; int gpio_debug_led1; int gpio_debug_led2; @@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {} #endif #if defined(CONFIG_MMC) -static int zylonite_mci_ro(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - - return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp); -} - -static int zylonite_mci_init(struct device *dev, - irq_handler_t zylonite_detect_int, - void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int err, cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - /* - * setup GPIO for Zylonite MMC controller - */ - err = gpio_request(gpio_cd, "mmc card detect"); - if (err) - goto err_request_cd; - gpio_direction_input(gpio_cd); - - err = gpio_request(gpio_wp, "mmc write protect"); - if (err) - goto err_request_wp; - gpio_direction_input(gpio_wp); - - err = request_irq(cd_irq, zylonite_detect_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); - if (err) { - printk(KERN_ERR "%s: MMC/SD/SDIO: " - "can't request card detect IRQ\n", __func__); - goto err_request_irq; - } - - return 0; - -err_request_irq: - gpio_free(gpio_wp); -err_request_wp: - gpio_free(gpio_cd); -err_request_cd: - return err; -} - -static void zylonite_mci_exit(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - free_irq(cd_irq, data); - gpio_free(gpio_cd); - gpio_free(gpio_wp); -} - static struct pxamci_platform_data zylonite_mci_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = zylonite_mci_init, - .exit = zylonite_mci_exit, - .get_ro = zylonite_mci_ro, - .gpio_card_detect = -1, - .gpio_card_ro = -1, + .gpio_card_detect = EXT_GPIO(0), + .gpio_card_ro = EXT_GPIO(2), .gpio_power = -1, }; static struct pxamci_platform_data zylonite_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(1), + .gpio_card_ro = EXT_GPIO(3), + .gpio_power = -1, +}; + +static struct pxamci_platform_data zylonite_mci3_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(30), + .gpio_card_ro = EXT_GPIO(31), + .gpio_power = -1, }; static void __init zylonite_init_mmc(void) @@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void) pxa_set_mci_info(&zylonite_mci_platform_data); pxa3xx_set_mci2_info(&zylonite_mci2_platform_data); if (cpu_is_pxa310()) - pxa3xx_set_mci3_info(&zylonite_mci_platform_data); + pxa3xx_set_mci3_info(&zylonite_mci3_platform_data); } #else static inline void zylonite_init_mmc(void) {} diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 84095440a878..3aa73b3e33f2 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO22_I2C_SDA, /* GPIO */ - GPIO18_GPIO, /* GPIO Expander #0 INT_N */ - GPIO19_GPIO, /* GPIO Expander #1 INT_N */ + GPIO18_GPIO | MFP_PULL_HIGH, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO | MFP_PULL_HIGH, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { @@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void) /* detect LCD panel */ zylonite_detect_lcd_panel(); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); - zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26); @@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void) if (cpu_is_pxa310()) { pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); - - /* MMC card detect & write protect for controller 2 */ - zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30); - zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31); } /* GPIOs for Debug LEDs */ diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 60d08f23f5e4..9942bac4cf7d 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void) gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2); gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); - zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15); } diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h index 940640066857..ce228bdc66dd 100644 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ b/arch/arm/mach-w90x900/include/mach/system.h @@ -15,7 +15,15 @@ * */ +#include <linux/io.h> #include <asm/proc-fns.h> +#include <mach/map.h> +#include <mach/regs-timer.h> + +#define WTCR (TMR_BA + 0x1C) +#define WTCLK (1 << 10) +#define WTE (1 << 7) +#define WTRE (1 << 1) static void arch_idle(void) { @@ -23,6 +31,11 @@ static void arch_idle(void) static void arch_reset(char mode, const char *cmd) { - cpu_reset(0); + if (mode == 's') { + /* Jump into ROM at address 0 */ + cpu_reset(0); + } else { + __raw_writel(WTE | WTRE | WTCLK, WTCR); + } } diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index 4128af870b41..b80f769bc135 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -42,7 +42,10 @@ #define TICKS_PER_SEC 100 #define PRESCALE 0x63 /* Divider = prescale + 1 */ -unsigned int timer0_load; +#define TDR_SHIFT 24 +#define TDR_MASK ((1 << TDR_SHIFT) - 1) + +static unsigned int timer0_load; static void nuc900_clockevent_setmode(enum clock_event_mode mode, struct clock_event_device *clk) @@ -88,7 +91,7 @@ static int nuc900_clockevent_setnextevent(unsigned long evt, static struct clock_event_device nuc900_clockevent_device = { .name = "nuc900-timer0", .shift = 32, - .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = nuc900_clockevent_setmode, .set_next_event = nuc900_clockevent_setnextevent, .rating = 300, @@ -112,8 +115,23 @@ static struct irqaction nuc900_timer0_irq = { .handler = nuc900_timer0_interrupt, }; -static void __init nuc900_clockevents_init(unsigned int rate) +static void __init nuc900_clockevents_init(void) { + unsigned int rate; + struct clk *clk = clk_get(NULL, "timer0"); + + BUG_ON(IS_ERR(clk)); + + __raw_writel(0x00, REG_TCSR0); + + clk_enable(clk); + rate = clk_get_rate(clk) / (PRESCALE + 1); + + timer0_load = (rate / TICKS_PER_SEC); + + __raw_writel(RESETINT, REG_TISR); + setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); + nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC, nuc900_clockevent_device.shift); nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff, @@ -127,26 +145,35 @@ static void __init nuc900_clockevents_init(unsigned int rate) static cycle_t nuc900_get_cycles(struct clocksource *cs) { - return ~__raw_readl(REG_TDR1); + return (~__raw_readl(REG_TDR1)) & TDR_MASK; } static struct clocksource clocksource_nuc900 = { .name = "nuc900-timer1", .rating = 200, .read = nuc900_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, + .mask = CLOCKSOURCE_MASK(TDR_SHIFT), + .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init nuc900_clocksource_init(unsigned int rate) +static void __init nuc900_clocksource_init(void) { unsigned int val; + unsigned int rate; + struct clk *clk = clk_get(NULL, "timer1"); + + BUG_ON(IS_ERR(clk)); + + __raw_writel(0x00, REG_TCSR1); + + clk_enable(clk); + rate = clk_get_rate(clk) / (PRESCALE + 1); __raw_writel(0xffffffff, REG_TICR1); val = __raw_readl(REG_TCSR1); - val |= (COUNTEN | PERIOD); + val |= (COUNTEN | PERIOD | PRESCALE); __raw_writel(val, REG_TCSR1); clocksource_nuc900.mult = @@ -156,25 +183,8 @@ static void __init nuc900_clocksource_init(unsigned int rate) static void __init nuc900_timer_init(void) { - struct clk *ck_ext = clk_get(NULL, "ext"); - unsigned int rate; - - BUG_ON(IS_ERR(ck_ext)); - - rate = clk_get_rate(ck_ext); - clk_put(ck_ext); - rate = rate / (PRESCALE + 0x01); - - /* set a known state */ - __raw_writel(0x00, REG_TCSR0); - __raw_writel(0x00, REG_TCSR1); - __raw_writel(RESETINT, REG_TISR); - timer0_load = (rate / TICKS_PER_SEC); - - setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); - - nuc900_clocksource_init(rate); - nuc900_clockevents_init(rate); + nuc900_clocksource_init(); + nuc900_clockevents_init(); } struct sys_timer nuc900_timer = { diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 52c40d155672..a04ffbbbe253 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -616,7 +616,7 @@ void __init mem_init(void) "%dK data, %dK init, %luK highmem)\n", nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10, datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); if (PAGE_SIZE >= 16384 && num_physpages <= 128) { extern int sysctl_overcommit_memory; diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index a26a605b73bd..0cb1848bd876 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -40,7 +40,6 @@ ENTRY(v7wbi_flush_user_tlb_range) asid r3, r3 @ mask ASID orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT - vma_vm_flags r2, r2 @ get vma->vm_flags 1: #ifdef CONFIG_SMP mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 810c47f56e77..9af494f0ab3d 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -58,19 +58,19 @@ #define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL) +#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL) #define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL) +#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL) #define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL) +#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL) #define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL) +#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL) #define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL) @@ -80,11 +80,11 @@ #define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL) +#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL) #define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL) +#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL) #define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL) @@ -112,7 +112,7 @@ #define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL) #define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL) @@ -229,28 +229,28 @@ #define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL) +#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) #define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL) +#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) #define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL) +#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) #define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL) +#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) #define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL) +#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) #define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL) @@ -265,7 +265,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL) +#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL) #define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL) @@ -354,19 +354,19 @@ #define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL) #define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL) #define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) @@ -377,11 +377,11 @@ #define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE) @@ -410,7 +410,7 @@ #define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) #define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL) @@ -418,23 +418,23 @@ #define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 91e738144804..854e2dc58481 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -41,4 +41,8 @@ #define UART1_BASE_ADDR 0x43f90000 #define UART2_BASE_ADDR 0x43f94000 +#define MX25_FEC_BASE_ADDR 0x50038000 + +#define MX25_INT_FEC 57 + #endif /* __MACH_MX25_H__ */ diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index a9eabdcfa163..51dc5c8106c0 100644 --- a/arch/arm/plat-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -204,14 +204,14 @@ static int __devinit pwm_probe(struct platform_device *pdev) goto err_free_clk; } - r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + r = request_mem_region(r->start, resource_size(r), pdev->name); if (r == NULL) { dev_err(&pdev->dev, "failed to request memory resource\n"); ret = -EBUSY; goto err_free_clk; } - pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + pwm->mmio_base = ioremap(r->start, resource_size(r)); if (pwm->mmio_base == NULL) { dev_err(&pdev->dev, "failed to ioremap() registers\n"); ret = -ENODEV; @@ -241,7 +241,7 @@ static int __devinit pwm_probe(struct platform_device *pdev) return 0; err_free_mem: - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); err_free_clk: clk_put(pwm->clk); err_free: @@ -271,7 +271,7 @@ static int __devexit pwm_remove(struct platform_device *pdev) iounmap(pwm->mmio_base); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); clk_put(pwm->clk); kfree(pwm); diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 6ffa21eb1b91..ffd56deb9e81 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -46,6 +46,7 @@ static struct clk clk_ext_xtal_mux = { #define clk_fin_epll clk_ext_xtal_mux #define clk_fout_mpll clk_mpll +#define clk_fout_epll clk_epll struct clk_sources { unsigned int nr_sources; @@ -88,11 +89,6 @@ static struct clksrc_clk clk_mout_apll = { .sources = &clk_src_apll, }; -static struct clk clk_fout_epll = { - .name = "fout_epll", - .id = -1, -}; - static struct clk *clk_src_epll_list[] = { [0] = &clk_fin_epll, [1] = &clk_fout_epll, @@ -715,7 +711,6 @@ static struct clk *clks[] __initdata = { &clk_iis_cd1, &clk_pcm_cd, &clk_mout_epll.clk, - &clk_fout_epll, &clk_mout_mpll.clk, &clk_dout_mpll, &clk_mmc0.clk, @@ -760,7 +755,4 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit) clkp->name, ret); } } - - clk_mpll.parent = &clk_mout_mpll.clk; - clk_epll.parent = &clk_mout_epll.clk; } diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 944a07c6cfd6..1d04e4078340 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -10,4 +10,9 @@ #include <asm-generic/page.h> #define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + #endif diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index f1036b6b9293..34c7c3ed2c9c 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -6,23 +6,9 @@ * Licensed under the GPL-2 or later. */ -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/spinlock.h> -#include <linux/delay.h> #include <linux/ptrace.h> /* for linux pt_regs struct */ #include <linux/kgdb.h> -#include <linux/console.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/irq.h> #include <linux/uaccess.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/blackfin.h> -#include <asm/dma.h> void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { @@ -147,7 +133,7 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->lb1 = gdb_regs[BFIN_LB1]; regs->usp = gdb_regs[BFIN_USP]; regs->syscfg = gdb_regs[BFIN_SYSCFG]; - regs->retx = gdb_regs[BFIN_PC]; + regs->retx = gdb_regs[BFIN_RETX]; regs->retn = gdb_regs[BFIN_RETN]; regs->rete = gdb_regs[BFIN_RETE]; regs->pc = gdb_regs[BFIN_PC]; @@ -424,182 +410,6 @@ struct kgdb_arch arch_kgdb_ops = { .correct_hw_break = bfin_correct_hw_break, }; -static int hex(char ch) -{ - if ((ch >= 'a') && (ch <= 'f')) - return ch - 'a' + 10; - if ((ch >= '0') && (ch <= '9')) - return ch - '0'; - if ((ch >= 'A') && (ch <= 'F')) - return ch - 'A' + 10; - return -1; -} - -static int validate_memory_access_address(unsigned long addr, int size) -{ - if (size < 0 || addr == 0) - return -EFAULT; - return bfin_mem_access_type(addr, size); -} - -static int bfin_probe_kernel_read(char *dst, char *src, int size) -{ - unsigned long lsrc = (unsigned long)src; - int mem_type; - - mem_type = validate_memory_access_address(lsrc, size); - if (mem_type < 0) - return mem_type; - - if (lsrc >= SYSMMR_BASE) { - if (size == 2 && lsrc % 2 == 0) { - u16 mmr = bfin_read16(src); - memcpy(dst, &mmr, sizeof(mmr)); - return 0; - } else if (size == 4 && lsrc % 4 == 0) { - u32 mmr = bfin_read32(src); - memcpy(dst, &mmr, sizeof(mmr)); - return 0; - } - } else { - switch (mem_type) { - case BFIN_MEM_ACCESS_CORE: - case BFIN_MEM_ACCESS_CORE_ONLY: - return probe_kernel_read(dst, src, size); - /* XXX: should support IDMA here with SMP */ - case BFIN_MEM_ACCESS_DMA: - if (dma_memcpy(dst, src, size)) - return 0; - break; - case BFIN_MEM_ACCESS_ITEST: - if (isram_memcpy(dst, src, size)) - return 0; - break; - } - } - - return -EFAULT; -} - -static int bfin_probe_kernel_write(char *dst, char *src, int size) -{ - unsigned long ldst = (unsigned long)dst; - int mem_type; - - mem_type = validate_memory_access_address(ldst, size); - if (mem_type < 0) - return mem_type; - - if (ldst >= SYSMMR_BASE) { - if (size == 2 && ldst % 2 == 0) { - u16 mmr; - memcpy(&mmr, src, sizeof(mmr)); - bfin_write16(dst, mmr); - return 0; - } else if (size == 4 && ldst % 4 == 0) { - u32 mmr; - memcpy(&mmr, src, sizeof(mmr)); - bfin_write32(dst, mmr); - return 0; - } - } else { - switch (mem_type) { - case BFIN_MEM_ACCESS_CORE: - case BFIN_MEM_ACCESS_CORE_ONLY: - return probe_kernel_write(dst, src, size); - /* XXX: should support IDMA here with SMP */ - case BFIN_MEM_ACCESS_DMA: - if (dma_memcpy(dst, src, size)) - return 0; - break; - case BFIN_MEM_ACCESS_ITEST: - if (isram_memcpy(dst, src, size)) - return 0; - break; - } - } - - return -EFAULT; -} - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null). May return an error. - */ -int kgdb_mem2hex(char *mem, char *buf, int count) -{ - char *tmp; - int err; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory copy. Hex conversion will work against this one. - */ - tmp = buf + count; - - err = bfin_probe_kernel_read(tmp, mem, count); - if (!err) { - while (count > 0) { - buf = pack_hex_byte(buf, *tmp); - tmp++; - count--; - } - - *buf = 0; - } - - return err; -} - -/* - * Copy the binary array pointed to by buf into mem. Fix $, #, and - * 0x7d escaped with 0x7d. Return a pointer to the character after - * the last byte written. - */ -int kgdb_ebin2mem(char *buf, char *mem, int count) -{ - char *tmp_old, *tmp_new; - int size; - - tmp_old = tmp_new = buf; - - for (size = 0; size < count; ++size) { - if (*tmp_old == 0x7d) - *tmp_new = *(++tmp_old) ^ 0x20; - else - *tmp_new = *tmp_old; - tmp_new++; - tmp_old++; - } - - return bfin_probe_kernel_write(mem, buf, count); -} - -/* - * Convert the hex array pointed to by buf into binary to be placed in mem. - * Return a pointer to the character AFTER the last byte written. - * May return an error. - */ -int kgdb_hex2mem(char *buf, char *mem, int count) -{ - char *tmp_raw, *tmp_hex; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory that is converted from hex. - */ - tmp_raw = buf + count * 2; - - tmp_hex = tmp_raw - 1; - while (tmp_hex >= buf) { - tmp_raw--; - *tmp_raw = hex(*tmp_hex--); - *tmp_raw |= hex(*tmp_hex--) << 4; - } - - return bfin_probe_kernel_write(mem, tmp_raw, count); -} - #define IN_MEM(addr, size, l1_addr, l1_size) \ ({ \ unsigned long __addr = (unsigned long)(addr); \ @@ -629,21 +439,6 @@ int kgdb_validate_break_address(unsigned long addr) return -EFAULT; } -int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) -{ - int err = bfin_probe_kernel_read(saved_instr, (char *)addr, - BREAK_INSTR_SIZE); - if (err) - return err; - return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, - BREAK_INSTR_SIZE); -} - -int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) -{ - return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE); -} - int kgdb_arch_init(void) { kgdb_single_step = 0; diff --git a/arch/blackfin/mm/Makefile b/arch/blackfin/mm/Makefile index d489f894f4b1..4c011b1f661f 100644 --- a/arch/blackfin/mm/Makefile +++ b/arch/blackfin/mm/Makefile @@ -2,4 +2,4 @@ # arch/blackfin/mm/Makefile # -obj-y := sram-alloc.o isram-driver.o init.o +obj-y := sram-alloc.o isram-driver.o init.o maccess.o diff --git a/arch/blackfin/mm/maccess.c b/arch/blackfin/mm/maccess.c new file mode 100644 index 000000000000..b71cebc1f8a3 --- /dev/null +++ b/arch/blackfin/mm/maccess.c @@ -0,0 +1,97 @@ +/* + * safe read and write memory routines callable while atomic + * + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/uaccess.h> +#include <asm/dma.h> + +static int validate_memory_access_address(unsigned long addr, int size) +{ + if (size < 0 || addr == 0) + return -EFAULT; + return bfin_mem_access_type(addr, size); +} + +long probe_kernel_read(void *dst, void *src, size_t size) +{ + unsigned long lsrc = (unsigned long)src; + int mem_type; + + mem_type = validate_memory_access_address(lsrc, size); + if (mem_type < 0) + return mem_type; + + if (lsrc >= SYSMMR_BASE) { + if (size == 2 && lsrc % 2 == 0) { + u16 mmr = bfin_read16(src); + memcpy(dst, &mmr, sizeof(mmr)); + return 0; + } else if (size == 4 && lsrc % 4 == 0) { + u32 mmr = bfin_read32(src); + memcpy(dst, &mmr, sizeof(mmr)); + return 0; + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return __probe_kernel_read(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } + } + + return -EFAULT; +} + +long probe_kernel_write(void *dst, void *src, size_t size) +{ + unsigned long ldst = (unsigned long)dst; + int mem_type; + + mem_type = validate_memory_access_address(ldst, size); + if (mem_type < 0) + return mem_type; + + if (ldst >= SYSMMR_BASE) { + if (size == 2 && ldst % 2 == 0) { + u16 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write16(dst, mmr); + return 0; + } else if (size == 4 && ldst % 4 == 0) { + u32 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write32(dst, mmr); + return 0; + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return __probe_kernel_write(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } + } + + return -EFAULT; +} diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h index 25c6a5002355..8c97068ac8fc 100644 --- a/arch/frv/include/asm/page.h +++ b/arch/frv/include/asm/page.h @@ -63,12 +63,10 @@ extern unsigned long max_pfn; #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -#ifdef CONFIG_MMU #define VM_DATA_DEFAULT_FLAGS \ (VM_READ | VM_WRITE | \ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -#endif #endif /* __ASSEMBLY__ */ diff --git a/arch/ia64/include/asm/ftrace.h b/arch/ia64/include/asm/ftrace.h index d20db3c2a656..fbd1a2470cae 100644 --- a/arch/ia64/include/asm/ftrace.h +++ b/arch/ia64/include/asm/ftrace.h @@ -8,7 +8,6 @@ extern void _mcount(unsigned long pfs, unsigned long r1, unsigned long b0, unsigned long r0); #define mcount _mcount -#include <asm/kprobes.h> /* In IA64, MCOUNT_ADDR is set in link time, so it's not a constant at compile time */ #define MCOUNT_ADDR (((struct fnptr *)mcount)->ip) #define FTRACE_ADDR (((struct fnptr *)ftrace_caller)->ip) diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h index dbf83fb28db3..d5505d6f2382 100644 --- a/arch/ia64/include/asm/kprobes.h +++ b/arch/ia64/include/asm/kprobes.h @@ -103,11 +103,6 @@ typedef struct kprobe_opcode { bundle_t bundle; } kprobe_opcode_t; -struct fnptr { - unsigned long ip; - unsigned long gp; -}; - /* Architecture specific copy of original instruction*/ struct arch_specific_insn { /* copy of the instruction to be emulated */ diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 85d965cb19a0..23cce999eb1c 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -74,7 +74,7 @@ struct ia64_tr_entry { extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size); extern void ia64_ptr_entry(u64 target_mask, int slot); -extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX]; +extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; /* region register macros diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h index 3ddb4e709dba..d323071d0f91 100644 --- a/arch/ia64/include/asm/topology.h +++ b/arch/ia64/include/asm/topology.h @@ -33,7 +33,9 @@ /* * Returns a bitmask of CPUs on Node 'node'. */ -#define cpumask_of_node(node) (&node_to_cpu_mask[node]) +#define cpumask_of_node(node) ((node) == -1 ? \ + cpu_all_mask : \ + &node_to_cpu_mask[node]) /* * Returns the number of the node containing Node 'nid'. diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h index bcd260e597de..93773fd37be0 100644 --- a/arch/ia64/include/asm/types.h +++ b/arch/ia64/include/asm/types.h @@ -35,6 +35,11 @@ typedef unsigned int umode_t; */ # ifdef __KERNEL__ +struct fnptr { + unsigned long ip; + unsigned long gp; +}; + /* DMA addresses are 64-bits wide, in general. */ typedef u64 dma_addr_t; diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 32f2639e9b0a..378b4833024f 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1225,9 +1225,12 @@ static void mca_insert_tr(u64 iord) unsigned long psr; int cpu = smp_processor_id(); + if (!ia64_idtrs[cpu]) + return; + psr = ia64_clear_ic(); for (i = IA64_TR_ALLOC_BASE; i < IA64_TR_ALLOC_MAX; i++) { - p = &__per_cpu_idtrs[cpu][iord-1][i]; + p = ia64_idtrs[cpu] + (iord - 1) * IA64_TR_ALLOC_MAX; if (p->pte & 0x1) { old_rr = ia64_get_rr(p->ifa); if (old_rr != p->rr) { diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 5246285a95fb..6bcbe215b9a4 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2293,7 +2293,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t * if ((mm->total_vm << PAGE_SHIFT) + len> task->rlim[RLIMIT_AS].rlim_cur) * return -ENOMEM; */ - if (size > task->signal->rlim[RLIMIT_MEMLOCK].rlim_cur) + if (size > task_rlimit(task, RLIMIT_MEMLOCK)) return -ENOMEM; /* diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index b9609c69343a..7c0d4814a68d 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -91,7 +91,7 @@ dma_mark_clean(void *addr, size_t size) inline void ia64_set_rbs_bot (void) { - unsigned long stack_size = current->signal->rlim[RLIMIT_STACK].rlim_max & -16; + unsigned long stack_size = rlimit_max(RLIMIT_STACK) & -16; if (stack_size > MAX_USER_STACK_SIZE) stack_size = MAX_USER_STACK_SIZE; diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index ee09d261f2e6..f3de9d7a98b4 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -48,7 +48,7 @@ DEFINE_PER_CPU(u8, ia64_need_tlb_flush); DEFINE_PER_CPU(u8, ia64_tr_num); /*Number of TR slots in current processor*/ DEFINE_PER_CPU(u8, ia64_tr_used); /*Max Slot number used by kernel*/ -struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX]; +struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; /* * Initializes the ia64_ctx.bitmap array based on max_ctx+1. @@ -429,10 +429,16 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size) struct ia64_tr_entry *p; int cpu = smp_processor_id(); + if (!ia64_idtrs[cpu]) { + ia64_idtrs[cpu] = kmalloc(2 * IA64_TR_ALLOC_MAX * + sizeof (struct ia64_tr_entry), GFP_KERNEL); + if (!ia64_idtrs[cpu]) + return -ENOMEM; + } r = -EINVAL; /*Check overlap with existing TR entries*/ if (target_mask & 0x1) { - p = &__per_cpu_idtrs[cpu][0][0]; + p = ia64_idtrs[cpu]; for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu); i++, p++) { if (p->pte & 0x1) @@ -444,7 +450,7 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size) } } if (target_mask & 0x2) { - p = &__per_cpu_idtrs[cpu][1][0]; + p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX; for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu); i++, p++) { if (p->pte & 0x1) @@ -459,16 +465,16 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size) for (i = IA64_TR_ALLOC_BASE; i < per_cpu(ia64_tr_num, cpu); i++) { switch (target_mask & 0x3) { case 1: - if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1)) + if (!((ia64_idtrs[cpu] + i)->pte & 0x1)) goto found; continue; case 2: - if (!(__per_cpu_idtrs[cpu][1][i].pte & 0x1)) + if (!((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1)) goto found; continue; case 3: - if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1) && - !(__per_cpu_idtrs[cpu][1][i].pte & 0x1)) + if (!((ia64_idtrs[cpu] + i)->pte & 0x1) && + !((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1)) goto found; continue; default: @@ -488,7 +494,7 @@ found: if (target_mask & 0x1) { ia64_itr(0x1, i, va, pte, log_size); ia64_srlz_i(); - p = &__per_cpu_idtrs[cpu][0][i]; + p = ia64_idtrs[cpu] + i; p->ifa = va; p->pte = pte; p->itir = log_size << 2; @@ -497,7 +503,7 @@ found: if (target_mask & 0x2) { ia64_itr(0x2, i, va, pte, log_size); ia64_srlz_i(); - p = &__per_cpu_idtrs[cpu][1][i]; + p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i; p->ifa = va; p->pte = pte; p->itir = log_size << 2; @@ -528,7 +534,7 @@ void ia64_ptr_entry(u64 target_mask, int slot) return; if (target_mask & 0x1) { - p = &__per_cpu_idtrs[cpu][0][slot]; + p = ia64_idtrs[cpu] + slot; if ((p->pte&0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) { p->pte = 0; ia64_ptr(0x1, p->ifa, p->itir>>2); @@ -537,7 +543,7 @@ void ia64_ptr_entry(u64 target_mask, int slot) } if (target_mask & 0x2) { - p = &__per_cpu_idtrs[cpu][1][slot]; + p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + slot; if ((p->pte & 0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) { p->pte = 0; ia64_ptr(0x2, p->ifa, p->itir>>2); @@ -546,8 +552,8 @@ void ia64_ptr_entry(u64 target_mask, int slot) } for (i = per_cpu(ia64_tr_used, cpu); i >= IA64_TR_ALLOC_BASE; i--) { - if ((__per_cpu_idtrs[cpu][0][i].pte & 0x1) || - (__per_cpu_idtrs[cpu][1][i].pte & 0x1)) + if (((ia64_idtrs[cpu] + i)->pte & 0x1) || + ((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1)) break; } per_cpu(ia64_tr_used, cpu) = i; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 9e8d00389eef..1651942f7feb 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -424,7 +424,7 @@ void __init mem_init(void) reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index f61c164d1e67..bc1297109cc5 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -505,5 +505,5 @@ void __init mem_init(void) (num_physpages - tmp) << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); } diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index dd0c8ff52a68..ac5c6bdb2f05 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -19,7 +19,7 @@ CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS))) KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include LDFLAGS := -OBJCOPYFLAGS := -O binary -R .note -R .comment -S +OBJCOPYFLAGS := -O binary -R .note -R .comment -R .GCC-command-line -R .note.gnu.build-id -S #LDFLAGS_vmlinux := -Map linkmap.txt CHECKFLAGS += diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index 3acce23708b0..441920d8ff58 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 11:13:22 2009 +# Linux kernel version: 2.6.33-rc1 +# Tue Dec 22 19:26:25 2009 # CONFIG_MN10300=y CONFIG_AM33=y @@ -22,6 +22,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HOTPLUG_CPU is not set CONFIG_HZ=1000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -43,11 +44,10 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -62,7 +62,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -CONFIG_STRIP_ASM_SYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -75,14 +74,22 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -90,6 +97,35 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -145,9 +181,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Power management options @@ -202,6 +237,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -216,6 +252,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -341,7 +378,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -362,14 +398,11 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -430,11 +463,15 @@ CONFIG_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -451,22 +488,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -490,11 +512,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # # File systems # +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -539,6 +567,7 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -561,13 +590,13 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set @@ -577,7 +606,11 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h index 0b610f482abb..f49ac49e09ad 100644 --- a/arch/mn10300/include/asm/bitops.h +++ b/arch/mn10300/include/asm/bitops.h @@ -165,7 +165,7 @@ static inline __attribute__((const)) unsigned long __ffs(unsigned long x) { int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x)); + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x) : "cc"); return bit; } @@ -177,7 +177,7 @@ static inline __attribute__((const)) int __ilog2_u32(u32 n) { int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n)); + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n) : "cc"); return bit; } diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h index 3a8329b3e869..34dcb8e68309 100644 --- a/arch/mn10300/include/asm/div64.h +++ b/arch/mn10300/include/asm/div64.h @@ -72,6 +72,7 @@ unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div) * MDR = MDR:val%div */ : "=r"(result) : "0"(val), "ir"(mult), "r"(div) + : "cc" ); return result; @@ -92,6 +93,7 @@ signed __muldiv64s(signed val, signed mult, signed div) * MDR = MDR:val%div */ : "=r"(result) : "0"(val), "ir"(mult), "r"(div) + : "cc" ); return result; diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 8214fb7e7fe4..3636c054dcd5 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -143,6 +143,7 @@ do { \ " mov %0,epsw \n" \ : "=&d"(tmp) \ : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ + : "cc" \ ); \ } while (0) diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h index e0239865abcb..1a7e29281c5d 100644 --- a/arch/mn10300/include/asm/tlbflush.h +++ b/arch/mn10300/include/asm/tlbflush.h @@ -22,7 +22,7 @@ do { \ " mov %0,%1 \n" \ : "=d"(w) \ : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ - : "memory" \ + : "cc", "memory" \ ); \ } while (0) diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 167e10ff06d9..197a7af3dd8a 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -316,7 +316,7 @@ do { \ " .previous\n" \ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ + : "cc", "memory"); \ } \ } while (0) @@ -352,7 +352,7 @@ do { \ " .previous\n" \ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ + : "cc", "memory"); \ } \ } while (0) diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 2a983931c11f..c05acb95c2a9 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -348,10 +348,11 @@ #define __NR_pwritev 335 #define __NR_rt_tgsigqueueinfo 336 #define __NR_perf_event_open 337 +#define __NR_recvmmsg 338 #ifdef __KERNEL__ -#define NR_syscalls 338 +#define NR_syscalls 339 /* * specify the deprecated syscalls we want to support on this arch diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index c9ee6c009d79..88e3e1c3cc21 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -724,6 +724,7 @@ ENTRY(sys_call_table) .long sys_pwritev /* 335 */ .long sys_rt_tgsigqueueinfo .long sys_perf_event_open + .long sys_recvmmsg nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index 229b710fc5d5..ef34d5a0f8bd 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -380,7 +380,8 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask) u32 epsw; asm volatile(" bclr %1,(%2) \n" " mov epsw,%0 \n" - : "=d"(epsw) : "d"(mask), "a"(ptr)); + : "=d"(epsw) : "d"(mask), "a"(ptr) + : "cc", "memory"); return !(epsw & EPSW_FLAG_Z); } diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index a21f43bc68e2..717db14c2cc3 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -264,7 +264,7 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, /* this is the X/Open sanctioned signal stack switching. */ if (ka->sa.sa_flags & SA_ONSTACK) { - if (!on_sig_stack(sp)) + if (sas_ss_flags(sp) == 0) sp = current->sas_ss_sp + current->sas_ss_size; } diff --git a/arch/mn10300/lib/checksum.c b/arch/mn10300/lib/checksum.c index 274f29ec33c1..b6580f5d89ee 100644 --- a/arch/mn10300/lib/checksum.c +++ b/arch/mn10300/lib/checksum.c @@ -22,6 +22,7 @@ static inline unsigned short from32to16(__wsum sum) " addc 0xffff,%0 \n" : "=r" (sum) : "r" (sum << 16), "0" (sum & 0xffff0000) + : "cc" ); return sum >> 16; } diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c index cce66bc0822d..fdf6f710f94e 100644 --- a/arch/mn10300/lib/delay.c +++ b/arch/mn10300/lib/delay.c @@ -28,7 +28,8 @@ void __delay(unsigned long loops) "2: add -1,%0 \n" " bne 2b \n" : "=&d" (d0) - : "0" (loops)); + : "0" (loops) + : "cc"); } EXPORT_SYMBOL(__delay); diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c index a75b203059c1..7826e6c364e7 100644 --- a/arch/mn10300/lib/usercopy.c +++ b/arch/mn10300/lib/usercopy.c @@ -62,7 +62,7 @@ do { \ " .previous" \ :"=&r"(res), "=r"(count), "=&r"(w) \ :"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \ - :"memory"); \ + : "memory", "cc"); \ } while (0) long @@ -109,7 +109,7 @@ do { \ ".previous\n" \ : "+r"(size), "=&r"(w) \ : "a"(addr), "d"(0) \ - : "memory"); \ + : "memory", "cc"); \ } while (0) unsigned long @@ -161,6 +161,6 @@ long strnlen_user(const char *s, long n) ".previous\n" :"=d"(res), "=&r"(w) :"0"(0), "a"(s), "r"(n) - :"memory"); + : "memory", "cc"); return res; } diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c index f3649d8f50e3..ee82d624b3c6 100644 --- a/arch/mn10300/mm/dma-alloc.c +++ b/arch/mn10300/mm/dma-alloc.c @@ -16,12 +16,24 @@ #include <linux/pci.h> #include <asm/io.h> +static unsigned long pci_sram_allocated = 0xbc000000; + void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, int gfp) { unsigned long addr; void *ret; + printk("dma_alloc_coherent(%s,%zu,,%x)\n", dev_name(dev), size, gfp); + + if (0xbe000000 - pci_sram_allocated >= size) { + size = (size + 255) & ~255; + addr = pci_sram_allocated; + pci_sram_allocated += size; + ret = (void *) addr; + goto done; + } + /* ignore region specifiers */ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); @@ -41,7 +53,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size, /* write back and evict all cache lines covering this region */ mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE); +done: *dma_handle = virt_to_bus((void *) addr); + printk("dma_alloc_coherent() = %p [%x]\n", ret, *dma_handle); return ret; } EXPORT_SYMBOL(dma_alloc_coherent); @@ -51,6 +65,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, { unsigned long addr = (unsigned long) vaddr & ~0x20000000; + if (addr >= 0x9c000000) + return; + free_pages(addr, get_order(size)); } EXPORT_SYMBOL(dma_free_coherent); diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c index ec1420562dc7..dd27a9a35152 100644 --- a/arch/mn10300/mm/init.c +++ b/arch/mn10300/mm/init.c @@ -118,8 +118,7 @@ void __init mem_init(void) reservedpages << (PAGE_SHIFT - 10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10)) - ); + totalhigh_pages << (PAGE_SHIFT - 10)); } /* diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 30016251f658..6dffbf97ac26 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -633,13 +633,13 @@ static int misalignment_addr(unsigned long *registers, unsigned long sp, goto displace_or_inc; case SD24: tmp = disp << 8; - asm("asr 8,%0" : "=r"(tmp) : "0"(tmp)); + asm("asr 8,%0" : "=r"(tmp) : "0"(tmp) : "cc"); disp = (long) tmp; goto displace_or_inc; case SIMM4_2: tmp = opcode >> 4 & 0x0f; tmp <<= 28; - asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); + asm("asr 28,%0" : "=r"(tmp) : "0"(tmp) : "cc"); disp = (long) tmp; goto displace_or_inc; case IMM8: diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h index 3bfc90938787..8086cc092cec 100644 --- a/arch/mn10300/unit-asb2305/include/unit/serial.h +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -11,7 +11,7 @@ #ifndef _ASM_UNIT_SERIAL_H #define _ASM_UNIT_SERIAL_H -#include <asm/cpu/cpu-regs.h> +#include <asm/cpu-regs.h> #include <proc/irq.h> #include <linux/serial_reg.h> diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index a71c49aa85eb..d1c72d59fa9f 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -15,7 +15,7 @@ #include <linux/irq.h> #endif /* __ASSEMBLY__ */ -#include <asm/cpu/timer-regs.h> +#include <asm/timer-regs.h> #include <unit/clock.h> /* diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c index d345ff9042d5..6f8de9954026 100644 --- a/arch/mn10300/unit-asb2305/leds.c +++ b/arch/mn10300/unit-asb2305/leds.c @@ -13,8 +13,8 @@ #include <linux/init.h> #include <asm/io.h> #include <asm/processor.h> -#include <asm/cpu/intctl-regs.h> -#include <asm/cpu/rtc-regs.h> +#include <asm/intctl-regs.h> +#include <asm/rtc-regs.h> #include <unit/leds.h> static const u8 asb2305_led_hex_tbl[16] = { diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index d100ca788468..78cd134ddf7d 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -218,45 +218,6 @@ void __init pcibios_resource_survey(void) pcibios_allocate_resources(1); } -int pcibios_enable_resources(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - - for (idx = 0; idx < 6; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1 << idx))) - continue; - - r = &dev->resource[idx]; - - if (!r->start && r->end) { - printk(KERN_ERR - "PCI: Device %s not available because of" - " resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - - if (cmd != old_cmd) - pci_write_config_word(dev, PCI_COMMAND, cmd); - - return 0; -} - /* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly. diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h index 9763d1ce343a..c3fa294b6e28 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.h +++ b/arch/mn10300/unit-asb2305/pci-asb2305.h @@ -34,7 +34,6 @@ extern unsigned int pci_probe; extern unsigned int pcibios_max_latency; extern void pcibios_resource_survey(void); -extern int pcibios_enable_resources(struct pci_dev *dev, int mask); /* pci.c */ diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 07dbbcda3b2e..2cb7e75ba1c0 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -27,6 +27,29 @@ struct pci_bus *pci_root_bus; struct pci_ops *pci_root_ops; /* + * The accessible PCI window does not cover the entire CPU address space, but + * there are devices we want to access outside of that window, so we need to + * insert specific PCI bus resources instead of using the platform-level bus + * resources directly for the PCI root bus. + * + * These are configured and inserted by pcibios_init() and are attached to the + * root bus by pcibios_fixup_bus(). + */ +static struct resource pci_ioport_resource = { + .name = "PCI IO", + .start = 0xbe000000, + .end = 0xbe03ffff, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_iomem_resource = { + .name = "PCI mem", + .start = 0xb8000000, + .end = 0xbbffffff, + .flags = IORESOURCE_MEM, +}; + +/* * Functions for accessing PCI configuration space */ @@ -279,7 +302,7 @@ static int __init pci_sanity_check(struct pci_ops *o) (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ))) return 1; - printk(KERN_ERROR "PCI: Sanity check failed\n"); + printk(KERN_ERR "PCI: Sanity check failed\n"); return 0; } @@ -297,6 +320,7 @@ static int __init pci_check_direct(void) printk(KERN_INFO "PCI: Using configuration ampci\n"); request_mem_region(0xBE040000, 256, "AMPCI bridge"); request_mem_region(0xBFFFFFF4, 12, "PCI ampci"); + request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM"); return 0; } @@ -358,6 +382,11 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev; + if (bus->number == 0) { + bus->resource[0] = &pci_ioport_resource; + bus->resource[1] = &pci_iomem_resource; + } + if (bus->self) { pci_read_bridge_bases(bus); pcibios_fixup_device_resources(bus->self); @@ -380,6 +409,11 @@ static int __init pcibios_init(void) iomem_resource.start = 0xA0000000; iomem_resource.end = 0xDFFFFFFF; + if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) + panic("Unable to insert PCI IOMEM resource\n"); + if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) + panic("Unable to insert PCI IOPORT resource\n"); + if (!pci_probe) return 0; @@ -391,32 +425,11 @@ static int __init pcibios_init(void) printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n", MEM_PAGING_REG); - { -#if 0 - static struct pci_bus am33_root_bus = { - .children = LIST_HEAD_INIT(am33_root_bus.children), - .devices = LIST_HEAD_INIT(am33_root_bus.devices), - .number = 0, - .secondary = 0, - .resource = { &ioport_resource, &iomem_resource }, - }; - - am33_root_bus.ops = pci_root_ops; - list_add_tail(&am33_root_bus.node, &pci_root_buses); - - am33_root_bus.subordinate = pci_do_scan_bus(0); - - pci_root_bus = &am33_root_bus; -#else - pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL); -#endif - } + pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL); pcibios_irq_init(); pcibios_fixup_irqs(); -#if 0 pcibios_resource_survey(); -#endif return 0; } @@ -440,7 +453,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) { int err; - err = pcibios_enable_resources(dev, mask); + err = pci_enable_resources(dev, mask); if (err == 0) pcibios_enable_irq(dev); return err; @@ -455,6 +468,7 @@ static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o) bus->number = 0; + o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID, 4, &x); o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x); x |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 1c452cc3f6e9..a76c8e0ab90f 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -15,9 +15,8 @@ #include <asm/io.h> #include <asm/setup.h> #include <asm/processor.h> -#include <asm/cpu/intctl-regs.h> -#include <asm/cpu/rtc-regs.h> -#include <asm/cpu/serial-regs.h> +#include <asm/intctl-regs.h> +#include <asm/serial-regs.h> #include <unit/serial.h> /* diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index bb2465bcb327..826a30a00f59 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -20,7 +20,7 @@ all: $(obj)/zImage BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ - -fno-strict-aliasing -Os -msoft-float -pipe \ + -fno-strict-aliasing -Os -msoft-float -pipe -D__KERNEL__\ -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ -isystem $(shell $(CROSS32CC) -print-file-name=include) BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc @@ -34,6 +34,8 @@ BOOTCFLAGS += -fno-stack-protector endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) +BOOTCFLAGS += -include include/linux/autoconf.h -Iarch/powerpc/include +BOOTCFLAGS += -Iinclude DTS_FLAGS ?= -p 1024 diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index 8c15b2c85d5a..dfaf458d6702 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -106,7 +106,7 @@ void __init mem_init(void) ram << (PAGE_SHIFT-10), codesize >> 10, reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 55298e891571..6bf1f1ac478c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -49,6 +49,7 @@ config X86 select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO select HAVE_HW_BREAKPOINT select PERF_EVENTS select ANON_INODES diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index f25bbd37765a..fbb47daf2459 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o +targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC @@ -49,10 +49,13 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) +$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE + $(call if_changed,lzo) suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_KERNEL_LZO) := lzo quiet_cmd_mkpiggy = MKPIGGY $@ cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false ) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 842b2a36174a..3b22fe8ab91b 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -162,6 +162,10 @@ static int lines, cols; #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif + static void scroll(void) { int i; diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h index 0c9825e97f36..088d09fb1615 100644 --- a/arch/x86/include/asm/uaccess_32.h +++ b/arch/x86/include/asm/uaccess_32.h @@ -205,14 +205,13 @@ static inline unsigned long __must_check copy_from_user(void *to, unsigned long n) { int sz = __compiletime_object_size(to); - int ret = -EFAULT; if (likely(sz == -1 || sz >= n)) - ret = _copy_from_user(to, from, n); + n = _copy_from_user(to, from, n); else copy_from_user_overflow(); - return ret; + return n; } long __must_check strncpy_from_user(char *dst, const char __user *src, diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 46324c6a4f6e..535e421498f6 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -30,16 +30,15 @@ static inline unsigned long __must_check copy_from_user(void *to, unsigned long n) { int sz = __compiletime_object_size(to); - int ret = -EFAULT; might_fault(); if (likely(sz == -1 || sz >= n)) - ret = _copy_from_user(to, from, n); + n = _copy_from_user(to, from, n); #ifdef CONFIG_DEBUG_VM else WARN(1, "Buffer overflow detected!\n"); #endif - return ret; + return n; } static __always_inline __must_check diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index de00c4619a55..53243ca7816d 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2434,6 +2434,13 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void) cfg = irq_cfg(irq); raw_spin_lock(&desc->lock); + /* + * Check if the irq migration is in progress. If so, we + * haven't received the cleanup request yet for this irq. + */ + if (cfg->move_in_progress) + goto unlock; + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) goto unlock; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 05ed7ab2ca48..a1a7876cadcb 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -733,13 +733,13 @@ struct early_res { }; static struct early_res early_res[MAX_EARLY_RES] __initdata = { { 0, PAGE_SIZE, "BIOS data page", 1 }, /* BIOS data page */ -#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_32) && defined(CONFIG_X86_TRAMPOLINE) /* * But first pinch a few for the stack/trampoline stuff * FIXME: Don't need the extra page at 4K, but need to fix * trampoline before removing it. (see the GDT stuff) */ - { PAGE_SIZE, PAGE_SIZE, "EX TRAMPOLINE", 1 }, + { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE", 1 }, #endif {} diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index c973f8e2a6cf..9a0c258a86be 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -892,8 +892,7 @@ void __init mem_init(void) reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) - ); + totalhigh_pages << (PAGE_SHIFT-10)); printk(KERN_INFO "virtual kernel memory layout:\n" " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c index b7a55dc55d13..f81a2fa8fe25 100644 --- a/arch/x86/pci/intel_bus.c +++ b/arch/x86/pci/intel_bus.c @@ -49,6 +49,10 @@ static void __devinit pci_root_bus_res(struct pci_dev *dev) u64 mmioh_base, mmioh_end; int bus_base, bus_end; + /* some sys doesn't get mmconf enabled */ + if (dev->cfg_size < 0x120) + return; + if (pci_root_num >= PCI_ROOT_NR) { printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n"); return; diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 48adf80926a0..a5142bddef41 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -446,8 +446,8 @@ EXPORT_SYMBOL_GPL(dpm_resume_noirq); /** * legacy_resume - Execute a legacy (bus or class) resume callback for device. - * dev: Device to resume. - * cb: Resume callback to execute. + * @dev: Device to resume. + * @cb: Resume callback to execute. */ static int legacy_resume(struct device *dev, int (*cb)(struct device *dev)) { @@ -711,8 +711,9 @@ EXPORT_SYMBOL_GPL(dpm_suspend_noirq); /** * legacy_suspend - Execute a legacy (bus or class) suspend callback for device. - * dev: Device to suspend. - * cb: Suspend callback to execute. + * @dev: Device to suspend. + * @state: PM transition of the system being carried out. + * @cb: Suspend callback to execute. */ static int legacy_suspend(struct device *dev, pm_message_t state, int (*cb)(struct device *dev, pm_message_t state)) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 68104434ebb5..73655aeb3a60 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -18,6 +18,7 @@ #include <linux/hrtimer.h> #include <linux/tick.h> #include <linux/sched.h> +#include <linux/math64.h> #define BUCKETS 12 #define RESOLUTION 1024 @@ -169,6 +170,12 @@ static DEFINE_PER_CPU(struct menu_device, menu_devices); static void menu_update(struct cpuidle_device *dev); +/* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */ +static u64 div_round64(u64 dividend, u32 divisor) +{ + return div_u64(dividend + (divisor / 2), divisor); +} + /** * menu_select - selects the next idle state to enter * @dev: the CPU @@ -209,9 +216,8 @@ static int menu_select(struct cpuidle_device *dev) data->correction_factor[data->bucket] = RESOLUTION * DECAY; /* Make sure to round up for half microseconds */ - data->predicted_us = DIV_ROUND_CLOSEST( - data->expected_us * data->correction_factor[data->bucket], - RESOLUTION * DECAY); + data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket], + RESOLUTION * DECAY); /* * We want to default to C1 (hlt), not to busy polling diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index a019b49ecc9b..1f1d88ae68d6 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -172,6 +172,15 @@ config GPIO_ADP5520 To compile this driver as a module, choose M here: the module will be called adp5520-gpio. +config GPIO_ADP5588 + tristate "ADP5588 I2C GPIO expander" + depends on I2C + help + This option enables support for 18 GPIOs found + on Analog Devices ADP5588 GPIO Expanders. + To compile this driver as a module, choose M here: the module will be + called adp5588-gpio. + comment "PCI GPIO expanders:" config GPIO_CS5535 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 52fe4cf734c7..48687238edb1 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG obj-$(CONFIG_GPIOLIB) += gpiolib.o obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o +obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o obj-$(CONFIG_GPIO_MAX7301) += max7301.o obj-$(CONFIG_GPIO_MAX732X) += max732x.o diff --git a/drivers/gpio/adp5588-gpio.c b/drivers/gpio/adp5588-gpio.c new file mode 100644 index 000000000000..afc097a16b33 --- /dev/null +++ b/drivers/gpio/adp5588-gpio.c @@ -0,0 +1,266 @@ +/* + * GPIO Chip driver for Analog Devices + * ADP5588 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#include <linux/i2c/adp5588.h> + +#define DRV_NAME "adp5588-gpio" +#define MAXGPIO 18 +#define ADP_BANK(offs) ((offs) >> 3) +#define ADP_BIT(offs) (1u << ((offs) & 0x7)) + +struct adp5588_gpio { + struct i2c_client *client; + struct gpio_chip gpio_chip; + struct mutex lock; /* protect cached dir, dat_out */ + unsigned gpio_start; + uint8_t dat_out[3]; + uint8_t dir[3]; +}; + +static int adp5588_gpio_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&client->dev, "Write Error\n"); + + return ret; +} + +static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off)) + & ADP_BIT(off)); +} + +static void adp5588_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + unsigned bank, bit; + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + bank = ADP_BANK(off); + bit = ADP_BIT(off); + + mutex_lock(&dev->lock); + if (val) + dev->dat_out[bank] |= bit; + else + dev->dat_out[bank] &= ~bit; + + adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, + dev->dat_out[bank]); + mutex_unlock(&dev->lock); +} + +static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + int ret; + unsigned bank; + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + bank = ADP_BANK(off); + + mutex_lock(&dev->lock); + dev->dir[bank] &= ~ADP_BIT(off); + ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]); + mutex_unlock(&dev->lock); + + return ret; +} + +static int adp5588_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + int ret; + unsigned bank, bit; + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + bank = ADP_BANK(off); + bit = ADP_BIT(off); + + mutex_lock(&dev->lock); + dev->dir[bank] |= bit; + + if (val) + dev->dat_out[bank] |= bit; + else + dev->dat_out[bank] &= ~bit; + + ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, + dev->dat_out[bank]); + ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, + dev->dir[bank]); + mutex_unlock(&dev->lock); + + return ret; +} + +static int __devinit adp5588_gpio_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; + struct adp5588_gpio *dev; + struct gpio_chip *gc; + int ret, i, revid; + + if (pdata == NULL) { + dev_err(&client->dev, "missing platform data\n"); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&client->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + dev->client = client; + + gc = &dev->gpio_chip; + gc->direction_input = adp5588_gpio_direction_input; + gc->direction_output = adp5588_gpio_direction_output; + gc->get = adp5588_gpio_get_value; + gc->set = adp5588_gpio_set_value; + gc->can_sleep = 1; + + gc->base = pdata->gpio_start; + gc->ngpio = MAXGPIO; + gc->label = client->name; + gc->owner = THIS_MODULE; + + mutex_init(&dev->lock); + + + ret = adp5588_gpio_read(dev->client, DEV_ID); + if (ret < 0) + goto err; + + revid = ret & ADP5588_DEVICE_ID_MASK; + + for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) { + dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i); + dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i); + ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0); + ret |= adp5588_gpio_write(client, GPIO_PULL1 + i, + (pdata->pullup_dis_mask >> (8 * i)) & 0xFF); + + if (ret) + goto err; + } + + ret = gpiochip_add(&dev->gpio_chip); + if (ret) + goto err; + + dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n", + gc->base, gc->base + gc->ngpio - 1, + client->name, revid); + + if (pdata->setup) { + ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context); + if (ret < 0) + dev_warn(&client->dev, "setup failed, %d\n", ret); + } + + i2c_set_clientdata(client, dev); + return 0; + +err: + kfree(dev); + return ret; +} + +static int __devexit adp5588_gpio_remove(struct i2c_client *client) +{ + struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; + struct adp5588_gpio *dev = i2c_get_clientdata(client); + int ret; + + if (pdata->teardown) { + ret = pdata->teardown(client, + dev->gpio_chip.base, dev->gpio_chip.ngpio, + pdata->context); + if (ret < 0) { + dev_err(&client->dev, "teardown failed %d\n", ret); + return ret; + } + } + + ret = gpiochip_remove(&dev->gpio_chip); + if (ret) { + dev_err(&client->dev, "gpiochip_remove failed %d\n", ret); + return ret; + } + + kfree(dev); + return 0; +} + +static const struct i2c_device_id adp5588_gpio_id[] = { + {DRV_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id); + +static struct i2c_driver adp5588_gpio_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = adp5588_gpio_probe, + .remove = __devexit_p(adp5588_gpio_remove), + .id_table = adp5588_gpio_id, +}; + +static int __init adp5588_gpio_init(void) +{ + return i2c_add_driver(&adp5588_gpio_driver); +} + +module_init(adp5588_gpio_init); + +static void __exit adp5588_gpio_exit(void) +{ + i2c_del_driver(&adp5588_gpio_driver); +} + +module_exit(adp5588_gpio_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("GPIO ADP5588 Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index a25ad284a272..350842ad3632 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -858,8 +858,6 @@ int gpio_sysfs_set_active_low(unsigned gpio, int value) desc = &gpio_desc[gpio]; if (test_bit(FLAG_EXPORT, &desc->flags)) { - struct device *dev; - dev = class_find_device(&gpio_class, NULL, desc, match_export); if (dev == NULL) { status = -ENODEV; diff --git a/drivers/gpu/drm/ati_pcigart.c b/drivers/gpu/drm/ati_pcigart.c index 628eae3e9b83..a1fce68e3bbe 100644 --- a/drivers/gpu/drm/ati_pcigart.c +++ b/drivers/gpu/drm/ati_pcigart.c @@ -39,8 +39,7 @@ static int drm_ati_alloc_pcigart_table(struct drm_device *dev, struct drm_ati_pcigart_info *gart_info) { gart_info->table_handle = drm_pci_alloc(dev, gart_info->table_size, - PAGE_SIZE, - gart_info->table_mask); + PAGE_SIZE); if (gart_info->table_handle == NULL) return -ENOMEM; @@ -112,6 +111,13 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) { DRM_DEBUG("PCI: no table in VRAM: using normal RAM\n"); + if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) { + DRM_ERROR("fail to set dma mask to 0x%Lx\n", + gart_info->table_mask); + ret = 1; + goto done; + } + ret = drm_ati_alloc_pcigart_table(dev, gart_info); if (ret) { DRM_ERROR("cannot allocate PCI GART page!\n"); diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 3d09e304f6f4..8417cc4c43f1 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -326,7 +326,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, * As we're limiting the address to 2^32-1 (or less), * casting it down to 32 bits is no problem, but we * need to point to a 64bit variable first. */ - dmah = drm_pci_alloc(dev, map->size, map->size, 0xffffffffUL); + dmah = drm_pci_alloc(dev, map->size, map->size); if (!dmah) { kfree(map); return -ENOMEM; @@ -885,7 +885,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request) while (entry->buf_count < count) { - dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000, 0xfffffffful); + dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000); if (!dmah) { /* Set count correctly so we free the proper amount. */ diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 5c9f79877cbf..defcaf108460 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -911,23 +911,27 @@ static int drm_cvt_modes(struct drm_connector *connector, struct drm_device *dev = connector->dev; struct cvt_timing *cvt; const int rates[] = { 60, 85, 75, 60, 50 }; + const u8 empty[3] = { 0, 0, 0 }; for (i = 0; i < 4; i++) { int uninitialized_var(width), height; cvt = &(timing->data.other_data.data.cvt[i]); - height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2; - switch (cvt->code[1] & 0xc0) { + if (!memcmp(cvt->code, empty, 3)) + continue; + + height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2; + switch (cvt->code[1] & 0x0c) { case 0x00: width = height * 4 / 3; break; - case 0x40: + case 0x04: width = height * 16 / 9; break; - case 0x80: + case 0x08: width = height * 16 / 10; break; - case 0xc0: + case 0x0c: width = height * 15 / 9; break; } diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 1b49fa055f4f..100ee48760b7 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -156,7 +156,7 @@ static bool drm_fb_helper_connector_parse_command_line(struct drm_connector *con force = DRM_FORCE_ON; break; case 'D': - if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) || + if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) force = DRM_FORCE_ON; else diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c index 577094fb1995..e68ebf92fa2a 100644 --- a/drivers/gpu/drm/drm_pci.c +++ b/drivers/gpu/drm/drm_pci.c @@ -47,8 +47,7 @@ /** * \brief Allocate a PCI consistent memory block, for DMA. */ -drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align, - dma_addr_t maxaddr) +drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align) { drm_dma_handle_t *dmah; #if 1 @@ -63,11 +62,6 @@ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t ali if (align > size) return NULL; - if (pci_set_dma_mask(dev->pdev, maxaddr) != 0) { - DRM_ERROR("Setting pci dma mask failed\n"); - return NULL; - } - dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL); if (!dmah) return NULL; diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 18476bf0b580..9c9998c4dceb 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -272,7 +272,7 @@ static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_co mem = kmap_atomic(pages[page], KM_USER0); for (i = 0; i < PAGE_SIZE; i += 4) seq_printf(m, "%08x : %08x\n", i, mem[i / 4]); - kunmap_atomic(pages[page], KM_USER0); + kunmap_atomic(mem, KM_USER0); } } @@ -386,34 +386,6 @@ out: return 0; } -static int i915_registers_info(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; - struct drm_device *dev = node->minor->dev; - drm_i915_private_t *dev_priv = dev->dev_private; - uint32_t reg; - -#define DUMP_RANGE(start, end) \ - for (reg=start; reg < end; reg += 4) \ - seq_printf(m, "%08x\t%08x\n", reg, I915_READ(reg)); - - DUMP_RANGE(0x00000, 0x00fff); /* VGA registers */ - DUMP_RANGE(0x02000, 0x02fff); /* instruction, memory, interrupt control registers */ - DUMP_RANGE(0x03000, 0x031ff); /* FENCE and PPGTT control registers */ - DUMP_RANGE(0x03200, 0x03fff); /* frame buffer compression registers */ - DUMP_RANGE(0x05000, 0x05fff); /* I/O control registers */ - DUMP_RANGE(0x06000, 0x06fff); /* clock control registers */ - DUMP_RANGE(0x07000, 0x07fff); /* 3D internal debug registers */ - DUMP_RANGE(0x07400, 0x088ff); /* GPE debug registers */ - DUMP_RANGE(0x0a000, 0x0afff); /* display palette registers */ - DUMP_RANGE(0x10000, 0x13fff); /* MMIO MCHBAR */ - DUMP_RANGE(0x30000, 0x3ffff); /* overlay registers */ - DUMP_RANGE(0x60000, 0x6ffff); /* display engine pipeline registers */ - DUMP_RANGE(0x70000, 0x72fff); /* display and cursor registers */ - DUMP_RANGE(0x73000, 0x73fff); /* performance counters */ - - return 0; -} - static int i915_wedged_open(struct inode *inode, struct file *filp) @@ -519,7 +491,6 @@ static int i915_wedged_create(struct dentry *root, struct drm_minor *minor) } static struct drm_info_list i915_debugfs_list[] = { - {"i915_regs", i915_registers_info, 0}, {"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST}, {"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST}, {"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST}, diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 701bfeac7f57..bbe47812e4b6 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -123,7 +123,7 @@ static int i915_init_phys_hws(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; /* Program Hardware Status Page */ dev_priv->status_page_dmah = - drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); + drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE); if (!dev_priv->status_page_dmah) { DRM_ERROR("Can not allocate hardware status page\n"); @@ -813,9 +813,13 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_PAGEFLIPPING: value = 1; break; + case I915_PARAM_HAS_EXECBUF2: + /* depends on GEM */ + value = dev_priv->has_gem; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", - param->param); + param->param); return -EINVAL; } @@ -1117,7 +1121,8 @@ static void i915_setup_compression(struct drm_device *dev, int size) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_mm_node *compressed_fb, *compressed_llb; - unsigned long cfb_base, ll_base; + unsigned long cfb_base; + unsigned long ll_base = 0; /* Leave 1M for line length buffer & misc. */ compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0); @@ -1200,14 +1205,6 @@ static int i915_load_modeset_init(struct drm_device *dev, dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & 0xff000000; - if (IS_MOBILE(dev) || IS_I9XX(dev)) - dev_priv->cursor_needs_physical = true; - else - dev_priv->cursor_needs_physical = false; - - if (IS_I965G(dev) || IS_G33(dev)) - dev_priv->cursor_needs_physical = false; - /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024)); @@ -1257,6 +1254,8 @@ static int i915_load_modeset_init(struct drm_device *dev, if (ret) goto destroy_ringbuffer; + intel_modeset_init(dev); + ret = drm_irq_install(dev); if (ret) goto destroy_ringbuffer; @@ -1271,8 +1270,6 @@ static int i915_load_modeset_init(struct drm_device *dev, I915_WRITE(INSTPM, (1 << 5) | (1 << 21)); - intel_modeset_init(dev); - drm_helper_initial_config(dev); return 0; @@ -1360,7 +1357,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) { struct drm_i915_private *dev_priv = dev->dev_private; resource_size_t base, size; - int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1; + int ret = 0, mmio_bar; uint32_t agp_size, prealloc_size, prealloc_start; /* i915 has 4 more counters */ @@ -1376,8 +1373,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev->dev_private = (void *)dev_priv; dev_priv->dev = dev; + dev_priv->info = (struct intel_device_info *) flags; /* Add register map (needed for suspend/resume) */ + mmio_bar = IS_I9XX(dev) ? 0 : 1; base = drm_get_resource_start(dev, mmio_bar); size = drm_get_resource_len(dev, mmio_bar); @@ -1652,6 +1651,7 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH), + DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH), DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH), diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 24286ca168fc..be631cc3e4dc 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -33,7 +33,6 @@ #include "i915_drm.h" #include "i915_drv.h" -#include "drm_pciids.h" #include <linux/console.h> #include "drm_crtc_helper.h" @@ -48,8 +47,124 @@ module_param_named(powersave, i915_powersave, int, 0400); static struct drm_driver driver; -static struct pci_device_id pciidlist[] = { - i915_PCI_IDS +#define INTEL_VGA_DEVICE(id, info) { \ + .class = PCI_CLASS_DISPLAY_VGA << 8, \ + .class_mask = 0xffff00, \ + .vendor = 0x8086, \ + .device = id, \ + .subvendor = PCI_ANY_ID, \ + .subdevice = PCI_ANY_ID, \ + .driver_data = (unsigned long) info } + +const static struct intel_device_info intel_i830_info = { + .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1, +}; + +const static struct intel_device_info intel_845g_info = { + .is_i8xx = 1, +}; + +const static struct intel_device_info intel_i85x_info = { + .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1, +}; + +const static struct intel_device_info intel_i865g_info = { + .is_i8xx = 1, +}; + +const static struct intel_device_info intel_i915g_info = { + .is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1, +}; +const static struct intel_device_info intel_i915gm_info = { + .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1, + .cursor_needs_physical = 1, +}; +const static struct intel_device_info intel_i945g_info = { + .is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1, +}; +const static struct intel_device_info intel_i945gm_info = { + .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1, + .has_hotplug = 1, .cursor_needs_physical = 1, +}; + +const static struct intel_device_info intel_i965g_info = { + .is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1, +}; + +const static struct intel_device_info intel_i965gm_info = { + .is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1, + .is_mobile = 1, .has_fbc = 1, .has_rc6 = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_g33_info = { + .is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_g45_info = { + .is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_gm45_info = { + .is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1, + .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_pineview_info = { + .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_ironlake_d_info = { + .is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_ironlake_m_info = { + .is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1, + .need_gfx_hws = 1, .has_rc6 = 1, + .has_hotplug = 1, +}; + +const static struct pci_device_id pciidlist[] = { + INTEL_VGA_DEVICE(0x3577, &intel_i830_info), + INTEL_VGA_DEVICE(0x2562, &intel_845g_info), + INTEL_VGA_DEVICE(0x3582, &intel_i85x_info), + INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info), + INTEL_VGA_DEVICE(0x2572, &intel_i865g_info), + INTEL_VGA_DEVICE(0x2582, &intel_i915g_info), + INTEL_VGA_DEVICE(0x258a, &intel_i915g_info), + INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info), + INTEL_VGA_DEVICE(0x2772, &intel_i945g_info), + INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info), + INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info), + INTEL_VGA_DEVICE(0x2972, &intel_i965g_info), + INTEL_VGA_DEVICE(0x2982, &intel_i965g_info), + INTEL_VGA_DEVICE(0x2992, &intel_i965g_info), + INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info), + INTEL_VGA_DEVICE(0x29b2, &intel_g33_info), + INTEL_VGA_DEVICE(0x29c2, &intel_g33_info), + INTEL_VGA_DEVICE(0x29d2, &intel_g33_info), + INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info), + INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info), + INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info), + INTEL_VGA_DEVICE(0x2e02, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e12, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e22, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e32, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e42, &intel_g45_info), + INTEL_VGA_DEVICE(0xa001, &intel_pineview_info), + INTEL_VGA_DEVICE(0xa011, &intel_pineview_info), + INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info), + INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info), + {0, 0, 0} }; #if defined(CONFIG_DRM_I915_KMS) @@ -284,6 +399,52 @@ i915_pci_resume(struct pci_dev *pdev) return i915_resume(dev); } +static int +i915_pm_suspend(struct device *dev) +{ + return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND); +} + +static int +i915_pm_resume(struct device *dev) +{ + return i915_pci_resume(to_pci_dev(dev)); +} + +static int +i915_pm_freeze(struct device *dev) +{ + return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE); +} + +static int +i915_pm_thaw(struct device *dev) +{ + /* thaw during hibernate, do nothing! */ + return 0; +} + +static int +i915_pm_poweroff(struct device *dev) +{ + return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE); +} + +static int +i915_pm_restore(struct device *dev) +{ + return i915_pci_resume(to_pci_dev(dev)); +} + +const struct dev_pm_ops i915_pm_ops = { + .suspend = i915_pm_suspend, + .resume = i915_pm_resume, + .freeze = i915_pm_freeze, + .thaw = i915_pm_thaw, + .poweroff = i915_pm_poweroff, + .restore = i915_pm_restore, +}; + static struct vm_operations_struct i915_gem_vm_ops = { .fault = i915_gem_fault, .open = drm_gem_vm_open, @@ -344,10 +505,7 @@ static struct drm_driver driver = { .id_table = pciidlist, .probe = i915_pci_probe, .remove = i915_pci_remove, -#ifdef CONFIG_PM - .resume = i915_pci_resume, - .suspend = i915_pci_suspend, -#endif + .driver.pm = &i915_pm_ops, }, .name = DRIVER_NAME, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index fbecac72f5bb..29dd67626967 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -172,9 +172,31 @@ struct drm_i915_display_funcs { struct intel_overlay; +struct intel_device_info { + u8 is_mobile : 1; + u8 is_i8xx : 1; + u8 is_i915g : 1; + u8 is_i9xx : 1; + u8 is_i945gm : 1; + u8 is_i965g : 1; + u8 is_i965gm : 1; + u8 is_g33 : 1; + u8 need_gfx_hws : 1; + u8 is_g4x : 1; + u8 is_pineview : 1; + u8 is_ironlake : 1; + u8 has_fbc : 1; + u8 has_rc6 : 1; + u8 has_pipe_cxsr : 1; + u8 has_hotplug : 1; + u8 cursor_needs_physical : 1; +}; + typedef struct drm_i915_private { struct drm_device *dev; + const struct intel_device_info *info; + int has_gem; void __iomem *regs; @@ -232,8 +254,6 @@ typedef struct drm_i915_private { int hangcheck_count; uint32_t last_acthd; - bool cursor_needs_physical; - struct drm_mm vram; unsigned long cfb_size; @@ -287,8 +307,6 @@ typedef struct drm_i915_private { u32 saveDSPACNTR; u32 saveDSPBCNTR; u32 saveDSPARB; - u32 saveRENDERSTANDBY; - u32 savePWRCTXA; u32 saveHWS; u32 savePIPEACONF; u32 savePIPEBCONF; @@ -561,6 +579,7 @@ typedef struct drm_i915_private { u16 orig_clock; int child_dev_num; struct child_device_config *child_dev; + struct drm_connector *int_lvds_connector; } drm_i915_private_t; /** driver private structure attached to each drm_gem_object */ @@ -794,6 +813,8 @@ int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv); +int i915_gem_execbuffer2(struct drm_device *dev, void *data, + struct drm_file *file_priv); int i915_gem_pin_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int i915_gem_unpin_ioctl(struct drm_device *dev, void *data, @@ -860,6 +881,9 @@ void i915_gem_shrinker_exit(void); void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj); void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj); +bool i915_tiling_ok(struct drm_device *dev, int stride, int size, + int tiling_mode); +bool i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj); /* i915_gem_debug.c */ void i915_gem_dump_object(struct drm_gem_object *obj, int len, @@ -982,67 +1006,33 @@ extern void g4x_disable_fbc(struct drm_device *dev); extern int i915_wrap_ring(struct drm_device * dev); extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); -#define IS_I830(dev) ((dev)->pci_device == 0x3577) -#define IS_845G(dev) ((dev)->pci_device == 0x2562) -#define IS_I85X(dev) ((dev)->pci_device == 0x3582) -#define IS_I865G(dev) ((dev)->pci_device == 0x2572) -#define IS_I8XX(dev) (IS_I830(dev) || IS_845G(dev) || IS_I85X(dev) || IS_I865G(dev)) - -#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a) -#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) -#define IS_I945G(dev) ((dev)->pci_device == 0x2772) -#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\ - (dev)->pci_device == 0x27AE) -#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ - (dev)->pci_device == 0x2982 || \ - (dev)->pci_device == 0x2992 || \ - (dev)->pci_device == 0x29A2 || \ - (dev)->pci_device == 0x2A02 || \ - (dev)->pci_device == 0x2A12 || \ - (dev)->pci_device == 0x2A42 || \ - (dev)->pci_device == 0x2E02 || \ - (dev)->pci_device == 0x2E12 || \ - (dev)->pci_device == 0x2E22 || \ - (dev)->pci_device == 0x2E32 || \ - (dev)->pci_device == 0x2E42 || \ - (dev)->pci_device == 0x0042 || \ - (dev)->pci_device == 0x0046) - -#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \ - (dev)->pci_device == 0x2A12) - -#define IS_GM45(dev) ((dev)->pci_device == 0x2A42) - -#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ - (dev)->pci_device == 0x2E12 || \ - (dev)->pci_device == 0x2E22 || \ - (dev)->pci_device == 0x2E32 || \ - (dev)->pci_device == 0x2E42 || \ - IS_GM45(dev)) - -#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001) -#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011) -#define IS_PINEVIEW(dev) (IS_PINEVIEW_G(dev) || IS_PINEVIEW_M(dev)) - -#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ - (dev)->pci_device == 0x29B2 || \ - (dev)->pci_device == 0x29D2 || \ - (IS_PINEVIEW(dev))) - +#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info) + +#define IS_I830(dev) ((dev)->pci_device == 0x3577) +#define IS_845G(dev) ((dev)->pci_device == 0x2562) +#define IS_I85X(dev) ((dev)->pci_device == 0x3582) +#define IS_I865G(dev) ((dev)->pci_device == 0x2572) +#define IS_I8XX(dev) (INTEL_INFO(dev)->is_i8xx) +#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g) +#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) +#define IS_I945G(dev) ((dev)->pci_device == 0x2772) +#define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm) +#define IS_I965G(dev) (INTEL_INFO(dev)->is_i965g) +#define IS_I965GM(dev) (INTEL_INFO(dev)->is_i965gm) +#define IS_GM45(dev) ((dev)->pci_device == 0x2A42) +#define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x) +#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001) +#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011) +#define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview) +#define IS_G33(dev) (INTEL_INFO(dev)->is_g33) #define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042) #define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046) -#define IS_IRONLAKE(dev) (IS_IRONLAKE_D(dev) || IS_IRONLAKE_M(dev)) - -#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ - IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \ - IS_IRONLAKE(dev)) +#define IS_IRONLAKE(dev) (INTEL_INFO(dev)->is_ironlake) +#define IS_I9XX(dev) (INTEL_INFO(dev)->is_i9xx) +#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile) -#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ - IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \ - IS_PINEVIEW(dev) || IS_IRONLAKE_M(dev)) +#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws) -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \ - IS_IRONLAKE(dev)) /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte * rows, which changed the alignment requirements and fence programming. */ @@ -1054,17 +1044,14 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define SUPPORTS_EDP(dev) (IS_IRONLAKE_M(dev)) #define SUPPORTS_TV(dev) (IS_I9XX(dev) && IS_MOBILE(dev) && \ !IS_IRONLAKE(dev) && !IS_PINEVIEW(dev)) -#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev)) +#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug) /* dsparb controlled by hw only */ #define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev)) #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IRONLAKE(dev)) -#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IRONLAKE(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \ - (IS_I9XX(dev) || IS_GM45(dev)) && \ - !IS_PINEVIEW(dev) && \ - !IS_IRONLAKE(dev)) -#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IRONLAKE_M(dev)) +#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr) +#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc) +#define I915_HAS_RC6(dev) (INTEL_INFO(dev)->has_rc6) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8c463cf2050a..2748609f05b3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2021,9 +2021,6 @@ i915_gem_object_unbind(struct drm_gem_object *obj) /* blow away mappings if mapped through GTT */ i915_gem_release_mmap(obj); - if (obj_priv->fence_reg != I915_FENCE_REG_NONE) - i915_gem_clear_fence_reg(obj); - /* Move the object to the CPU domain to ensure that * any possible CPU writes while it's not in the GTT * are flushed when we go to remap it. This will @@ -2039,6 +2036,10 @@ i915_gem_object_unbind(struct drm_gem_object *obj) BUG_ON(obj_priv->active); + /* release the fence reg _after_ flushing */ + if (obj_priv->fence_reg != I915_FENCE_REG_NONE) + i915_gem_clear_fence_reg(obj); + if (obj_priv->agp_mem != NULL) { drm_unbind_agp(obj_priv->agp_mem); drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE); @@ -2581,9 +2582,6 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) bool retry_alloc = false; int ret; - if (dev_priv->mm.suspended) - return -EBUSY; - if (obj_priv->madv != I915_MADV_WILLNEED) { DRM_ERROR("Attempting to bind a purgeable object\n"); return -EINVAL; @@ -3198,7 +3196,7 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, static int i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, struct drm_file *file_priv, - struct drm_i915_gem_exec_object *entry, + struct drm_i915_gem_exec_object2 *entry, struct drm_i915_gem_relocation_entry *relocs) { struct drm_device *dev = obj->dev; @@ -3206,12 +3204,35 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, struct drm_i915_gem_object *obj_priv = obj->driver_private; int i, ret; void __iomem *reloc_page; + bool need_fence; + + need_fence = entry->flags & EXEC_OBJECT_NEEDS_FENCE && + obj_priv->tiling_mode != I915_TILING_NONE; + + /* Check fence reg constraints and rebind if necessary */ + if (need_fence && !i915_obj_fenceable(dev, obj)) + i915_gem_object_unbind(obj); /* Choose the GTT offset for our buffer and put it there. */ ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment); if (ret) return ret; + /* + * Pre-965 chips need a fence register set up in order to + * properly handle blits to/from tiled surfaces. + */ + if (need_fence) { + ret = i915_gem_object_get_fence_reg(obj); + if (ret != 0) { + if (ret != -EBUSY && ret != -ERESTARTSYS) + DRM_ERROR("Failure to install fence: %d\n", + ret); + i915_gem_object_unpin(obj); + return ret; + } + } + entry->offset = obj_priv->gtt_offset; /* Apply the relocations, using the GTT aperture to avoid cache @@ -3373,7 +3394,7 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, */ static int i915_dispatch_gem_execbuffer(struct drm_device *dev, - struct drm_i915_gem_execbuffer *exec, + struct drm_i915_gem_execbuffer2 *exec, struct drm_clip_rect *cliprects, uint64_t exec_offset) { @@ -3463,7 +3484,7 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv) } static int -i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, +i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object2 *exec_list, uint32_t buffer_count, struct drm_i915_gem_relocation_entry **relocs) { @@ -3478,8 +3499,10 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, } *relocs = drm_calloc_large(reloc_count, sizeof(**relocs)); - if (*relocs == NULL) + if (*relocs == NULL) { + DRM_ERROR("failed to alloc relocs, count %d\n", reloc_count); return -ENOMEM; + } for (i = 0; i < buffer_count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; @@ -3503,7 +3526,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, } static int -i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list, +i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list, uint32_t buffer_count, struct drm_i915_gem_relocation_entry *relocs) { @@ -3536,7 +3559,7 @@ err: } static int -i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec, +i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer2 *exec, uint64_t exec_offset) { uint32_t exec_start, exec_len; @@ -3589,18 +3612,18 @@ i915_gem_wait_for_pending_flip(struct drm_device *dev, } int -i915_gem_execbuffer(struct drm_device *dev, void *data, - struct drm_file *file_priv) +i915_gem_do_execbuffer(struct drm_device *dev, void *data, + struct drm_file *file_priv, + struct drm_i915_gem_execbuffer2 *args, + struct drm_i915_gem_exec_object2 *exec_list) { drm_i915_private_t *dev_priv = dev->dev_private; - struct drm_i915_gem_execbuffer *args = data; - struct drm_i915_gem_exec_object *exec_list = NULL; struct drm_gem_object **object_list = NULL; struct drm_gem_object *batch_obj; struct drm_i915_gem_object *obj_priv; struct drm_clip_rect *cliprects = NULL; struct drm_i915_gem_relocation_entry *relocs; - int ret, ret2, i, pinned = 0; + int ret = 0, ret2, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains, reloc_index; int pin_tries, flips; @@ -3614,25 +3637,13 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); return -EINVAL; } - /* Copy in the exec list from userland */ - exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count); object_list = drm_malloc_ab(sizeof(*object_list), args->buffer_count); - if (exec_list == NULL || object_list == NULL) { - DRM_ERROR("Failed to allocate exec or object list " - "for %d buffers\n", + if (object_list == NULL) { + DRM_ERROR("Failed to allocate object list for %d buffers\n", args->buffer_count); ret = -ENOMEM; goto pre_mutex_err; } - ret = copy_from_user(exec_list, - (struct drm_i915_relocation_entry __user *) - (uintptr_t) args->buffers_ptr, - sizeof(*exec_list) * args->buffer_count); - if (ret != 0) { - DRM_ERROR("copy %d exec entries failed %d\n", - args->buffer_count, ret); - goto pre_mutex_err; - } if (args->num_cliprects != 0) { cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects), @@ -3884,20 +3895,6 @@ err: mutex_unlock(&dev->struct_mutex); - if (!ret) { - /* Copy the new buffer offsets back to the user's exec list. */ - ret = copy_to_user((struct drm_i915_relocation_entry __user *) - (uintptr_t) args->buffers_ptr, - exec_list, - sizeof(*exec_list) * args->buffer_count); - if (ret) { - ret = -EFAULT; - DRM_ERROR("failed to copy %d exec entries " - "back to user (%d)\n", - args->buffer_count, ret); - } - } - /* Copy the updated relocations out regardless of current error * state. Failure to update the relocs would mean that the next * time userland calls execbuf, it would do so with presumed offset @@ -3914,12 +3911,158 @@ err: pre_mutex_err: drm_free_large(object_list); - drm_free_large(exec_list); kfree(cliprects); return ret; } +/* + * Legacy execbuffer just creates an exec2 list from the original exec object + * list array and passes it to the real function. + */ +int +i915_gem_execbuffer(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_execbuffer *args = data; + struct drm_i915_gem_execbuffer2 exec2; + struct drm_i915_gem_exec_object *exec_list = NULL; + struct drm_i915_gem_exec_object2 *exec2_list = NULL; + int ret, i; + +#if WATCH_EXEC + DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", + (int) args->buffers_ptr, args->buffer_count, args->batch_len); +#endif + + if (args->buffer_count < 1) { + DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); + return -EINVAL; + } + + /* Copy in the exec list from userland */ + exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count); + exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count); + if (exec_list == NULL || exec2_list == NULL) { + DRM_ERROR("Failed to allocate exec list for %d buffers\n", + args->buffer_count); + drm_free_large(exec_list); + drm_free_large(exec2_list); + return -ENOMEM; + } + ret = copy_from_user(exec_list, + (struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + sizeof(*exec_list) * args->buffer_count); + if (ret != 0) { + DRM_ERROR("copy %d exec entries failed %d\n", + args->buffer_count, ret); + drm_free_large(exec_list); + drm_free_large(exec2_list); + return -EFAULT; + } + + for (i = 0; i < args->buffer_count; i++) { + exec2_list[i].handle = exec_list[i].handle; + exec2_list[i].relocation_count = exec_list[i].relocation_count; + exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr; + exec2_list[i].alignment = exec_list[i].alignment; + exec2_list[i].offset = exec_list[i].offset; + if (!IS_I965G(dev)) + exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE; + else + exec2_list[i].flags = 0; + } + + exec2.buffers_ptr = args->buffers_ptr; + exec2.buffer_count = args->buffer_count; + exec2.batch_start_offset = args->batch_start_offset; + exec2.batch_len = args->batch_len; + exec2.DR1 = args->DR1; + exec2.DR4 = args->DR4; + exec2.num_cliprects = args->num_cliprects; + exec2.cliprects_ptr = args->cliprects_ptr; + exec2.flags = 0; + + ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list); + if (!ret) { + /* Copy the new buffer offsets back to the user's exec list. */ + for (i = 0; i < args->buffer_count; i++) + exec_list[i].offset = exec2_list[i].offset; + /* ... and back out to userspace */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec_list, + sizeof(*exec_list) * args->buffer_count); + if (ret) { + ret = -EFAULT; + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); + } + } else { + DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret); + } + + drm_free_large(exec_list); + drm_free_large(exec2_list); + return ret; +} + +int +i915_gem_execbuffer2(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_execbuffer2 *args = data; + struct drm_i915_gem_exec_object2 *exec2_list = NULL; + int ret; + +#if WATCH_EXEC + DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", + (int) args->buffers_ptr, args->buffer_count, args->batch_len); +#endif + + if (args->buffer_count < 1) { + DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count); + return -EINVAL; + } + + exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count); + if (exec2_list == NULL) { + DRM_ERROR("Failed to allocate exec list for %d buffers\n", + args->buffer_count); + return -ENOMEM; + } + ret = copy_from_user(exec2_list, + (struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + sizeof(*exec2_list) * args->buffer_count); + if (ret != 0) { + DRM_ERROR("copy %d exec entries failed %d\n", + args->buffer_count, ret); + drm_free_large(exec2_list); + return -EFAULT; + } + + ret = i915_gem_do_execbuffer(dev, data, file_priv, args, exec2_list); + if (!ret) { + /* Copy the new buffer offsets back to the user's exec list. */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec2_list, + sizeof(*exec2_list) * args->buffer_count); + if (ret) { + ret = -EFAULT; + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); + } + } + + drm_free_large(exec2_list); + return ret; +} + int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) { @@ -3933,19 +4076,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) if (ret) return ret; } - /* - * Pre-965 chips need a fence register set up in order to - * properly handle tiled surfaces. - */ - if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) { - ret = i915_gem_object_get_fence_reg(obj); - if (ret != 0) { - if (ret != -EBUSY && ret != -ERESTARTSYS) - DRM_ERROR("Failure to install fence: %d\n", - ret); - return ret; - } - } + obj_priv->pin_count++; /* If the object is not active and not pending a flush, @@ -4708,7 +4839,7 @@ int i915_gem_init_phys_object(struct drm_device *dev, phys_obj->id = id; - phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff); + phys_obj->handle = drm_pci_alloc(dev, size, 0); if (!phys_obj->handle) { ret = -ENOMEM; goto kfree_obj; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 30d6af6c09bb..df278b2685bf 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -304,35 +304,39 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) /** - * Returns the size of the fence for a tiled object of the given size. + * Returns whether an object is currently fenceable. If not, it may need + * to be unbound and have its pitch adjusted. */ -static int -i915_get_fence_size(struct drm_device *dev, int size) +bool +i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj) { - int i; - int start; + struct drm_i915_gem_object *obj_priv = obj->driver_private; if (IS_I965G(dev)) { /* The 965 can have fences at any page boundary. */ - return ALIGN(size, 4096); + if (obj->size & 4095) + return false; + return true; + } else if (IS_I9XX(dev)) { + if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK) + return false; } else { - /* Align the size to a power of two greater than the smallest - * fence size. - */ - if (IS_I9XX(dev)) - start = 1024 * 1024; - else - start = 512 * 1024; + if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK) + return false; + } - for (i = start; i < size; i <<= 1) - ; + /* Power of two sized... */ + if (obj->size & (obj->size - 1)) + return false; - return i; - } + /* Objects must be size aligned as well */ + if (obj_priv->gtt_offset & (obj->size - 1)) + return false; + return true; } /* Check pitch constriants for all chips & tiling formats */ -static bool +bool i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) { int tile_width; @@ -384,12 +388,6 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (stride & (stride - 1)) return false; - /* We don't 0handle the aperture area covered by the fence being bigger - * than the object size. - */ - if (i915_get_fence_size(dev, size) != size) - return false; - return true; } diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 85f4c5de97e2..7cd8110051b6 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -313,6 +313,8 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) dev_priv->mm.irq_gem_seqno = seqno; trace_i915_gem_request_complete(dev, seqno); DRM_WAKEUP(&dev_priv->irq_queue); + dev_priv->hangcheck_count = 0; + mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); } if (de_iir & DE_GSE) @@ -1084,6 +1086,10 @@ void i915_driver_irq_preinstall(struct drm_device * dev) (void) I915_READ(IER); } +/* + * Must be called after intel_modeset_init or hotplug interrupts won't be + * enabled correctly. + */ int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1106,19 +1112,23 @@ int i915_driver_irq_postinstall(struct drm_device *dev) if (I915_HAS_HOTPLUG(dev)) { u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN); - /* Leave other bits alone */ - hotplug_en |= HOTPLUG_EN_MASK; + /* Note HDMI and DP share bits */ + if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS) + hotplug_en |= HDMIB_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS) + hotplug_en |= HDMIC_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS) + hotplug_en |= HDMID_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS) + hotplug_en |= SDVOC_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS) + hotplug_en |= SDVOB_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) + hotplug_en |= CRT_HOTPLUG_INT_EN; + /* Ignore TV since it's buggy */ + I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); - dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS | - TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS | - SDVOB_HOTPLUG_INT_STATUS; - if (IS_G4X(dev)) { - dev_priv->hotplug_supported_mask |= - HDMIB_HOTPLUG_INT_STATUS | - HDMIC_HOTPLUG_INT_STATUS | - HDMID_HOTPLUG_INT_STATUS; - } /* Enable in IER... */ enable_mask |= I915_DISPLAY_PORT_INTERRUPT; /* and unmask in IMR */ diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 974b3cf70618..149d360d64a3 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -879,13 +879,6 @@ #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) #define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */ #define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f -#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \ - HDMIC_HOTPLUG_INT_EN | \ - HDMID_HOTPLUG_INT_EN | \ - SDVOB_HOTPLUG_INT_EN | \ - SDVOC_HOTPLUG_INT_EN | \ - CRT_HOTPLUG_INT_EN) - #define PORT_HOTPLUG_STAT 0x61114 #define HDMIB_HOTPLUG_INT_STATUS (1 << 29) @@ -982,6 +975,8 @@ #define LVDS_PORT_EN (1 << 31) /* Selects pipe B for LVDS data. Must be set on pre-965. */ #define LVDS_PIPEB_SELECT (1 << 30) +/* LVDS dithering flag on 965/g4x platform */ +#define LVDS_ENABLE_DITHER (1 << 25) /* Enable border for unscaled (or aspect-scaled) display */ #define LVDS_BORDER_ENABLE (1 << 15) /* @@ -1751,6 +1746,8 @@ /* Display & cursor control */ +/* dithering flag on Ironlake */ +#define PIPE_ENABLE_DITHER (1 << 4) /* Pipe A */ #define PIPEADSL 0x70000 #define PIPEACONF 0x70008 diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index d5ebb00a9d49..a3b90c9561dc 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -732,12 +732,6 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); - /* Render Standby */ - if (I915_HAS_RC6(dev)) { - dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); - dev_priv->savePWRCTXA = I915_READ(PWRCTXA); - } - /* Hardware status page */ dev_priv->saveHWS = I915_READ(HWS_PGA); @@ -793,12 +787,6 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); - /* Render Standby */ - if (I915_HAS_RC6(dev)) { - I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY); - I915_WRITE(PWRCTXA, dev_priv->savePWRCTXA); - } - /* Hardware status page */ I915_WRITE(HWS_PGA, dev_priv->saveHWS); diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 9f3d3e563414..ddefc871edfe 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -548,4 +548,6 @@ void intel_crt_init(struct drm_device *dev) drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); drm_sysfs_connector_add(connector); + + dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS; } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 52cd9b006da2..002612fae717 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -262,6 +262,14 @@ struct intel_limit { #define IRONLAKE_P2_LVDS_FAST 7 /* double channel */ #define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */ +#define IRONLAKE_P_DISPLAY_PORT_MIN 10 +#define IRONLAKE_P_DISPLAY_PORT_MAX 20 +#define IRONLAKE_P2_DISPLAY_PORT_FAST 10 +#define IRONLAKE_P2_DISPLAY_PORT_SLOW 10 +#define IRONLAKE_P2_DISPLAY_PORT_LIMIT 0 +#define IRONLAKE_P1_DISPLAY_PORT_MIN 1 +#define IRONLAKE_P1_DISPLAY_PORT_MAX 2 + static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); @@ -271,9 +279,6 @@ intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); -static bool -intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock); static bool intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, @@ -496,7 +501,7 @@ static const intel_limit_t intel_limits_ironlake_sdvo = { .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW, .p2_fast = IRONLAKE_P2_SDVO_DAC_FAST }, - .find_pll = intel_ironlake_find_best_PLL, + .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_lvds = { @@ -511,7 +516,30 @@ static const intel_limit_t intel_limits_ironlake_lvds = { .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_P2_LVDS_SLOW, .p2_fast = IRONLAKE_P2_LVDS_FAST }, - .find_pll = intel_ironlake_find_best_PLL, + .find_pll = intel_g4x_find_best_PLL, +}; + +static const intel_limit_t intel_limits_ironlake_display_port = { + .dot = { .min = IRONLAKE_DOT_MIN, + .max = IRONLAKE_DOT_MAX }, + .vco = { .min = IRONLAKE_VCO_MIN, + .max = IRONLAKE_VCO_MAX}, + .n = { .min = IRONLAKE_N_MIN, + .max = IRONLAKE_N_MAX }, + .m = { .min = IRONLAKE_M_MIN, + .max = IRONLAKE_M_MAX }, + .m1 = { .min = IRONLAKE_M1_MIN, + .max = IRONLAKE_M1_MAX }, + .m2 = { .min = IRONLAKE_M2_MIN, + .max = IRONLAKE_M2_MAX }, + .p = { .min = IRONLAKE_P_DISPLAY_PORT_MIN, + .max = IRONLAKE_P_DISPLAY_PORT_MAX }, + .p1 = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN, + .max = IRONLAKE_P1_DISPLAY_PORT_MAX}, + .p2 = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT, + .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW, + .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST }, + .find_pll = intel_find_pll_ironlake_dp, }; static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc) @@ -519,6 +547,9 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc) const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_ironlake_lvds; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + HAS_eDP) + limit = &intel_limits_ironlake_display_port; else limit = &intel_limits_ironlake_sdvo; @@ -791,7 +822,13 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + int lvds_reg; + + if (IS_IRONLAKE(dev)) + lvds_reg = PCH_LVDS; + else + lvds_reg = LVDS; + if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else @@ -839,6 +876,11 @@ intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, { struct drm_device *dev = crtc->dev; intel_clock_t clock; + + /* return directly when it is eDP */ + if (HAS_eDP) + return true; + if (target < 200000) { clock.n = 1; clock.p1 = 2; @@ -857,68 +899,6 @@ intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, return true; } -static bool -intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - intel_clock_t clock; - int err_most = 47; - int err_min = 10000; - - /* eDP has only 2 clock choice, no n/m/p setting */ - if (HAS_eDP) - return true; - - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) - return intel_find_pll_ironlake_dp(limit, crtc, target, - refclk, best_clock); - - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) - clock.p2 = limit->p2.p2_fast; - else - clock.p2 = limit->p2.p2_slow; - } else { - if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; - else - clock.p2 = limit->p2.p2_fast; - } - - memset(best_clock, 0, sizeof(*best_clock)); - for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { - /* based on hardware requriment prefer smaller n to precision */ - for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { - /* based on hardware requirment prefere larger m1,m2 */ - for (clock.m1 = limit->m1.max; - clock.m1 >= limit->m1.min; clock.m1--) { - for (clock.m2 = limit->m2.max; - clock.m2 >= limit->m2.min; clock.m2--) { - int this_err; - - intel_clock(dev, refclk, &clock); - if (!intel_PLL_is_valid(crtc, &clock)) - continue; - this_err = abs((10000 - (target*10000/clock.dot))); - if (this_err < err_most) { - *best_clock = clock; - /* found on first matching */ - goto out; - } else if (this_err < err_min) { - *best_clock = clock; - err_min = this_err; - } - } - } - } - } -out: - return true; -} - /* DisplayPort has only two frequencies, 162MHz and 270MHz */ static bool intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, @@ -1493,6 +1473,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; u32 temp; int tries = 5, j, n; + u32 pipe_bpc; + + temp = I915_READ(pipeconf_reg); + pipe_bpc = temp & PIPE_BPC_MASK; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. @@ -1524,6 +1508,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ temp = I915_READ(fdi_rx_reg); + /* + * make the BPC in FDI Rx be consistent with that in + * pipeconf reg. + */ + temp &= ~(0x7 << 16); + temp |= (pipe_bpc << 11); I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE | FDI_SEL_PCDCLK | FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */ @@ -1666,6 +1656,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) /* enable PCH transcoder */ temp = I915_READ(transconf_reg); + /* + * make the BPC in transcoder be consistent with + * that in pipeconf reg. + */ + temp &= ~PIPE_BPC_MASK; + temp |= pipe_bpc; I915_WRITE(transconf_reg, temp | TRANS_ENABLE); I915_READ(transconf_reg); @@ -1745,6 +1741,9 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(fdi_tx_reg); temp = I915_READ(fdi_rx_reg); + /* BPC in FDI rx is consistent with that in pipeconf */ + temp &= ~(0x07 << 16); + temp |= (pipe_bpc << 11); I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE); I915_READ(fdi_rx_reg); @@ -1789,7 +1788,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) } } } - + temp = I915_READ(transconf_reg); + /* BPC in transcoder is consistent with that in pipeconf */ + temp &= ~PIPE_BPC_MASK; + temp |= pipe_bpc; + I915_WRITE(transconf_reg, temp); + I915_READ(transconf_reg); udelay(100); /* disable PCH DPLL */ @@ -2448,7 +2452,7 @@ static void pineview_enable_cxsr(struct drm_device *dev, unsigned long clock, * A value of 5us seems to be a good balance; safe for very low end * platforms but not overly aggressive on lower latency configs. */ -const static int latency_ns = 5000; +static const int latency_ns = 5000; static int i9xx_get_fifo_size(struct drm_device *dev, int plane) { @@ -2559,7 +2563,7 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, /* Calc sr entries for one plane configs */ if (sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ - const static int sr_latency_ns = 12000; + static const int sr_latency_ns = 12000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); @@ -2598,7 +2602,7 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, /* Calc sr entries for one plane configs */ if (sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ - const static int sr_latency_ns = 12000; + static const int sr_latency_ns = 12000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); @@ -2667,7 +2671,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, if (HAS_FW_BLC(dev) && sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ - const static int sr_latency_ns = 6000; + static const int sr_latency_ns = 6000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); @@ -2969,6 +2973,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(pipeconf_reg); + temp &= ~PIPE_BPC_MASK; + if (is_lvds) { + int lvds_reg = I915_READ(PCH_LVDS); + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + temp |= PIPE_8BPC; + else + temp |= PIPE_6BPC; + } else + temp |= PIPE_8BPC; + I915_WRITE(pipeconf_reg, temp); + I915_READ(pipeconf_reg); switch (temp & PIPE_BPC_MASK) { case PIPE_8BPC: @@ -3195,7 +3211,20 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ - + /* set the dithering flag */ + if (IS_I965G(dev)) { + if (dev_priv->lvds_dither) { + if (IS_IRONLAKE(dev)) + pipeconf |= PIPE_ENABLE_DITHER; + else + lvds |= LVDS_ENABLE_DITHER; + } else { + if (IS_IRONLAKE(dev)) + pipeconf &= ~PIPE_ENABLE_DITHER; + else + lvds &= ~LVDS_ENABLE_DITHER; + } + } I915_WRITE(lvds_reg, lvds); I915_READ(lvds_reg); } @@ -3385,7 +3414,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, /* we only need to pin inside GTT if cursor is non-phy */ mutex_lock(&dev->struct_mutex); - if (!dev_priv->cursor_needs_physical) { + if (!dev_priv->info->cursor_needs_physical) { ret = i915_gem_object_pin(bo, PAGE_SIZE); if (ret) { DRM_ERROR("failed to pin cursor bo\n"); @@ -3420,7 +3449,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, I915_WRITE(base, addr); if (intel_crtc->cursor_bo) { - if (dev_priv->cursor_needs_physical) { + if (dev_priv->info->cursor_needs_physical) { if (intel_crtc->cursor_bo != bo) i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else @@ -3779,125 +3808,6 @@ static void intel_gpu_idle_timer(unsigned long arg) queue_work(dev_priv->wq, &dev_priv->idle_work); } -void intel_increase_renderclock(struct drm_device *dev, bool schedule) -{ - drm_i915_private_t *dev_priv = dev->dev_private; - - if (IS_IRONLAKE(dev)) - return; - - if (!dev_priv->render_reclock_avail) { - DRM_DEBUG_DRIVER("not reclocking render clock\n"); - return; - } - - /* Restore render clock frequency to original value */ - if (IS_G4X(dev) || IS_I9XX(dev)) - pci_write_config_word(dev->pdev, GCFGC, dev_priv->orig_clock); - else if (IS_I85X(dev)) - pci_write_config_word(dev->pdev, HPLLCC, dev_priv->orig_clock); - DRM_DEBUG_DRIVER("increasing render clock frequency\n"); - - /* Schedule downclock */ - if (schedule) - mod_timer(&dev_priv->idle_timer, jiffies + - msecs_to_jiffies(GPU_IDLE_TIMEOUT)); -} - -void intel_decrease_renderclock(struct drm_device *dev) -{ - drm_i915_private_t *dev_priv = dev->dev_private; - - if (IS_IRONLAKE(dev)) - return; - - if (!dev_priv->render_reclock_avail) { - DRM_DEBUG_DRIVER("not reclocking render clock\n"); - return; - } - - if (IS_G4X(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~GM45_GC_RENDER_CLOCK_MASK; - gcfgc |= GM45_GC_RENDER_CLOCK_266_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I965G(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~I965_GC_RENDER_CLOCK_MASK; - gcfgc |= I965_GC_RENDER_CLOCK_267_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I945G(dev) || IS_I945GM(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~I945_GC_RENDER_CLOCK_MASK; - gcfgc |= I945_GC_RENDER_CLOCK_166_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I915G(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~I915_GC_RENDER_CLOCK_MASK; - gcfgc |= I915_GC_RENDER_CLOCK_166_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I85X(dev)) { - u16 hpllcc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, HPLLCC, &hpllcc); - - /* Up to maximum... */ - hpllcc &= ~GC_CLOCK_CONTROL_MASK; - hpllcc |= GC_CLOCK_133_200; - - pci_write_config_word(dev->pdev, HPLLCC, hpllcc); - } - DRM_DEBUG_DRIVER("decreasing render clock frequency\n"); -} - -/* Note that no increase function is needed for this - increase_renderclock() - * will also rewrite these bits - */ -void intel_decrease_displayclock(struct drm_device *dev) -{ - if (IS_IRONLAKE(dev)) - return; - - if (IS_I945G(dev) || IS_I945GM(dev) || IS_I915G(dev) || - IS_I915GM(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~0xf0; - gcfgc |= 0x80; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } -} - #define CRTC_IDLE_TIMEOUT 1000 /* ms */ static void intel_crtc_idle_timer(unsigned long arg) @@ -4011,12 +3921,6 @@ static void intel_idle_update(struct work_struct *work) mutex_lock(&dev->struct_mutex); - /* GPU isn't processing, downclock it. */ - if (!dev_priv->busy) { - intel_decrease_renderclock(dev); - intel_decrease_displayclock(dev); - } - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) @@ -4050,13 +3954,11 @@ void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj) if (!drm_core_check_feature(dev, DRIVER_MODESET)) return; - if (!dev_priv->busy) { + if (!dev_priv->busy) dev_priv->busy = true; - intel_increase_renderclock(dev, true); - } else { + else mod_timer(&dev_priv->idle_timer, jiffies + msecs_to_jiffies(GPU_IDLE_TIMEOUT)); - } list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->fb) @@ -4400,29 +4302,43 @@ static void intel_setup_outputs(struct drm_device *dev) bool found = false; if (I915_READ(SDVOB) & SDVO_DETECTED) { + DRM_DEBUG_KMS("probing SDVOB\n"); found = intel_sdvo_init(dev, SDVOB); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) + if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { + DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, SDVOB); + } - if (!found && SUPPORTS_INTEGRATED_DP(dev)) + if (!found && SUPPORTS_INTEGRATED_DP(dev)) { + DRM_DEBUG_KMS("probing DP_B\n"); intel_dp_init(dev, DP_B); + } } /* Before G4X SDVOC doesn't have its own detect register */ - if (I915_READ(SDVOB) & SDVO_DETECTED) + if (I915_READ(SDVOB) & SDVO_DETECTED) { + DRM_DEBUG_KMS("probing SDVOC\n"); found = intel_sdvo_init(dev, SDVOC); + } if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { - if (SUPPORTS_INTEGRATED_HDMI(dev)) + if (SUPPORTS_INTEGRATED_HDMI(dev)) { + DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); intel_hdmi_init(dev, SDVOC); - if (SUPPORTS_INTEGRATED_DP(dev)) + } + if (SUPPORTS_INTEGRATED_DP(dev)) { + DRM_DEBUG_KMS("probing DP_C\n"); intel_dp_init(dev, DP_C); + } } - if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) + if (SUPPORTS_INTEGRATED_DP(dev) && + (I915_READ(DP_D) & DP_DETECTED)) { + DRM_DEBUG_KMS("probing DP_D\n"); intel_dp_init(dev, DP_D); + } } else if (IS_I8XX(dev)) intel_dvo_init(dev); @@ -4527,6 +4443,42 @@ static const struct drm_mode_config_funcs intel_mode_funcs = { .fb_changed = intelfb_probe, }; +static struct drm_gem_object * +intel_alloc_power_context(struct drm_device *dev) +{ + struct drm_gem_object *pwrctx; + int ret; + + pwrctx = drm_gem_object_alloc(dev, 4096); + if (!pwrctx) { + DRM_DEBUG("failed to alloc power context, RC6 disabled\n"); + return NULL; + } + + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(pwrctx, 4096); + if (ret) { + DRM_ERROR("failed to pin power context: %d\n", ret); + goto err_unref; + } + + ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1); + if (ret) { + DRM_ERROR("failed to set-domain on power context: %d\n", ret); + goto err_unpin; + } + mutex_unlock(&dev->struct_mutex); + + return pwrctx; + +err_unpin: + i915_gem_object_unpin(pwrctx); +err_unref: + drm_gem_object_unreference(pwrctx); + mutex_unlock(&dev->struct_mutex); + return NULL; +} + void intel_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -4579,42 +4531,27 @@ void intel_init_clock_gating(struct drm_device *dev) * GPU can automatically power down the render unit if given a page * to save state. */ - if (I915_HAS_RC6(dev)) { - struct drm_gem_object *pwrctx; - struct drm_i915_gem_object *obj_priv; - int ret; + if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) { + struct drm_i915_gem_object *obj_priv = NULL; if (dev_priv->pwrctx) { obj_priv = dev_priv->pwrctx->driver_private; } else { - pwrctx = drm_gem_object_alloc(dev, 4096); - if (!pwrctx) { - DRM_DEBUG("failed to alloc power context, " - "RC6 disabled\n"); - goto out; - } + struct drm_gem_object *pwrctx; - ret = i915_gem_object_pin(pwrctx, 4096); - if (ret) { - DRM_ERROR("failed to pin power context: %d\n", - ret); - drm_gem_object_unreference(pwrctx); - goto out; + pwrctx = intel_alloc_power_context(dev); + if (pwrctx) { + dev_priv->pwrctx = pwrctx; + obj_priv = pwrctx->driver_private; } - - i915_gem_object_set_to_gtt_domain(pwrctx, 1); - - dev_priv->pwrctx = pwrctx; - obj_priv = pwrctx->driver_private; } - I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN); - I915_WRITE(MCHBAR_RENDER_STANDBY, - I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT); + if (obj_priv) { + I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN); + I915_WRITE(MCHBAR_RENDER_STANDBY, + I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT); + } } - -out: - return; } /* Set up chip specific display functions */ @@ -4770,7 +4707,6 @@ void intel_modeset_cleanup(struct drm_device *dev) del_timer_sync(&intel_crtc->idle_timer); } - intel_increase_renderclock(dev, false); del_timer_sync(&dev_priv->idle_timer); if (dev_priv->display.disable_fbc) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 4e7aa8b7b938..1349d9fd01c4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1402,14 +1402,20 @@ intel_dp_init(struct drm_device *dev, int output_reg) break; case DP_B: case PCH_DP_B: + dev_priv->hotplug_supported_mask |= + HDMIB_HOTPLUG_INT_STATUS; name = "DPDDC-B"; break; case DP_C: case PCH_DP_C: + dev_priv->hotplug_supported_mask |= + HDMIC_HOTPLUG_INT_STATUS; name = "DPDDC-C"; break; case DP_D: case PCH_DP_D: + dev_priv->hotplug_supported_mask |= + HDMID_HOTPLUG_INT_STATUS; name = "DPDDC-D"; break; } diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f04dbbe7d400..06431941b233 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -303,21 +303,26 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) if (sdvox_reg == SDVOB) { intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB"); + dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS; } else if (sdvox_reg == SDVOC) { intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC"); + dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS; } else if (sdvox_reg == HDMIB) { intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE, "HDMIB"); + dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS; } else if (sdvox_reg == HDMIC) { intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD, "HDMIC"); + dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS; } else if (sdvox_reg == HDMID) { intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF, "HDMID"); + dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS; } if (!intel_output->ddc_bus) goto err_connector; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 3118ce274e67..f4b4aa242df1 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -608,6 +608,13 @@ static const struct dmi_system_id bad_lid_status[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"), }, }, + { + .ident = "PC-81005", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MALATA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"), + }, + }, { } }; @@ -679,7 +686,14 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, struct drm_i915_private *dev_priv = container_of(nb, struct drm_i915_private, lid_notifier); struct drm_device *dev = dev_priv->dev; + struct drm_connector *connector = dev_priv->int_lvds_connector; + /* + * check and update the status of LVDS connector after receiving + * the LID nofication event. + */ + if (connector) + connector->status = connector->funcs->detect(connector); if (!acpi_lid_open()) { dev_priv->modeset_on_lid = 1; return NOTIFY_OK; @@ -854,65 +868,6 @@ static const struct dmi_system_id intel_no_lvds[] = { { } /* terminating entry */ }; -#ifdef CONFIG_ACPI -/* - * check_lid_device -- check whether @handle is an ACPI LID device. - * @handle: ACPI device handle - * @level : depth in the ACPI namespace tree - * @context: the number of LID device when we find the device - * @rv: a return value to fill if desired (Not use) - */ -static acpi_status -check_lid_device(acpi_handle handle, u32 level, void *context, - void **return_value) -{ - struct acpi_device *acpi_dev; - int *lid_present = context; - - acpi_dev = NULL; - /* Get the acpi device for device handle */ - if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) { - /* If there is no ACPI device for handle, return */ - return AE_OK; - } - - if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7)) - *lid_present = 1; - - return AE_OK; -} - -/** - * check whether there exists the ACPI LID device by enumerating the ACPI - * device tree. - */ -static int intel_lid_present(void) -{ - int lid_present = 0; - - if (acpi_disabled) { - /* If ACPI is disabled, there is no ACPI device tree to - * check, so assume the LID device would have been present. - */ - return 1; - } - - acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - check_lid_device, NULL, &lid_present, NULL); - - return lid_present; -} -#else -static int intel_lid_present(void) -{ - /* In the absence of ACPI built in, assume that the LID device would - * have been present. - */ - return 1; -} -#endif - /** * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID * @dev: drm device @@ -1031,12 +986,8 @@ void intel_lvds_init(struct drm_device *dev) if (dmi_check_system(intel_no_lvds)) return; - /* - * Assume LVDS is present if there's an ACPI lid device or if the - * device is present in the VBT. - */ - if (!lvds_is_present_in_vbt(dev) && !intel_lid_present()) { - DRM_DEBUG_KMS("LVDS is not present in VBT and no lid detected\n"); + if (!lvds_is_present_in_vbt(dev)) { + DRM_DEBUG_KMS("LVDS is not present in VBT\n"); return; } @@ -1180,6 +1131,8 @@ out: DRM_DEBUG_KMS("lid notifier registration failed\n"); dev_priv->lid_notifier.notifier_call = NULL; } + /* keep the LVDS connector */ + dev_priv->int_lvds_connector = connector; drm_sysfs_connector_add(connector); return; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 24a3dc99716c..de5144c8c153 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2662,6 +2662,7 @@ static void intel_sdvo_create_enhance_property(struct drm_connector *connector) bool intel_sdvo_init(struct drm_device *dev, int output_device) { + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; @@ -2708,10 +2709,12 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA, "SDVOB/VGA DDC BUS"); + dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS; } else { intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA, "SDVOC/VGA DDC BUS"); + dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS; } if (intel_output->ddc_bus == NULL) diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 552ec110b741..1d5b9b7b033f 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1840,6 +1840,8 @@ intel_tv_init(struct drm_device *dev) drm_connector_attach_property(connector, dev->mode_config.tv_bottom_margin_property, tv_priv->margin[TV_MARGIN_BOTTOM]); + + dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS; out: drm_sysfs_connector_add(connector); } diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 321044bef71c..41dd8ebff219 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -114,6 +114,7 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_dev i2c.i2c_id = gpio->sucI2cId.ucAccess; i2c.valid = true; + break; } } @@ -1026,6 +1027,7 @@ static struct radeon_atom_ss *radeon_atombios_get_ss_info(struct ss->delay = ss_info->asSS_Info[i].ucSS_Delay; ss->range = ss_info->asSS_Info[i].ucSS_Range; ss->refdiv = ss_info->asSS_Info[i].ucRecommendedRef_Div; + break; } } } diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index fd94dbca33ac..58f342659cc7 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -595,6 +595,34 @@ bool radeon_combios_get_clock_info(struct drm_device *dev) return false; } +static const uint32_t default_primarydac_adj[CHIP_LAST] = { + 0x00000808, /* r100 */ + 0x00000808, /* rv100 */ + 0x00000808, /* rs100 */ + 0x00000808, /* rv200 */ + 0x00000808, /* rs200 */ + 0x00000808, /* r200 */ + 0x00000808, /* rv250 */ + 0x00000000, /* rs300 */ + 0x00000808, /* rv280 */ + 0x00000808, /* r300 */ + 0x00000808, /* r350 */ + 0x00000808, /* rv350 */ + 0x00000808, /* rv380 */ + 0x00000808, /* r420 */ + 0x00000808, /* r423 */ + 0x00000808, /* rv410 */ + 0x00000000, /* rs400 */ + 0x00000000, /* rs480 */ +}; + +static void radeon_legacy_get_primary_dac_info_from_table(struct radeon_device *rdev, + struct radeon_encoder_primary_dac *p_dac) +{ + p_dac->ps2_pdac_adj = default_primarydac_adj[rdev->family]; + return; +} + struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct radeon_encoder *encoder) @@ -604,20 +632,20 @@ struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct uint16_t dac_info; uint8_t rev, bg, dac; struct radeon_encoder_primary_dac *p_dac = NULL; + int found = 0; - if (rdev->bios == NULL) + p_dac = kzalloc(sizeof(struct radeon_encoder_primary_dac), + GFP_KERNEL); + + if (!p_dac) return NULL; + if (rdev->bios == NULL) + goto out; + /* check CRT table */ dac_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); if (dac_info) { - p_dac = - kzalloc(sizeof(struct radeon_encoder_primary_dac), - GFP_KERNEL); - - if (!p_dac) - return NULL; - rev = RBIOS8(dac_info) & 0x3; if (rev < 2) { bg = RBIOS8(dac_info + 0x2) & 0xf; @@ -628,9 +656,13 @@ struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct dac = RBIOS8(dac_info + 0x3) & 0xf; p_dac->ps2_pdac_adj = (bg << 8) | (dac); } - + found = 1; } +out: + if (!found) /* fallback to defaults */ + radeon_legacy_get_primary_dac_info_from_table(rdev, p_dac); + return p_dac; } diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 20161567dbff..b82ae61d4d17 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -615,7 +615,7 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect ret = connector_status_connected; } } else { - if (radeon_connector->dac_load_detect) { + if (radeon_connector->dac_load_detect && encoder) { encoder_funcs = encoder->helper_private; ret = encoder_funcs->detect(encoder, connector); } diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 0b2f9c2ad2c1..06123ba31d31 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -2145,6 +2145,7 @@ int radeon_master_create(struct drm_device *dev, struct drm_master *master) &master_priv->sarea); if (ret) { DRM_ERROR("SAREA setup failed\n"); + kfree(master_priv); return ret; } master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 7c6848096bcd..0c51f8e46613 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -733,16 +733,18 @@ void radeon_device_fini(struct radeon_device *rdev) */ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state) { - struct radeon_device *rdev = dev->dev_private; + struct radeon_device *rdev; struct drm_crtc *crtc; int r; - if (dev == NULL || rdev == NULL) { + if (dev == NULL || dev->dev_private == NULL) { return -ENODEV; } if (state.event == PM_EVENT_PRETHAW) { return 0; } + rdev = dev->dev_private; + /* unpin the front buffers */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->fb); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 91d72b70abc9..1fb2f029d7e8 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -329,8 +329,11 @@ static bool radeon_setup_enc_conn(struct drm_device *dev) ret = radeon_get_atom_connector_info_from_object_table(dev); else ret = radeon_get_atom_connector_info_from_supported_devices_table(dev); - } else + } else { ret = radeon_get_legacy_connector_info_from_bios(dev); + if (ret == false) + ret = radeon_get_legacy_connector_info_from_table(dev); + } } else { if (!ASIC_IS_AVIVO(rdev)) ret = radeon_get_legacy_connector_info_from_table(dev); diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 4cdd8b4f7549..8495d4e32e18 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -140,16 +140,15 @@ int radeon_fence_create(struct radeon_device *rdev, struct radeon_fence **fence) bool radeon_fence_signaled(struct radeon_fence *fence) { - struct radeon_device *rdev = fence->rdev; unsigned long irq_flags; bool signaled = false; - if (rdev->gpu_lockup) { + if (!fence) return true; - } - if (fence == NULL) { + + if (fence->rdev->gpu_lockup) return true; - } + write_lock_irqsave(&fence->rdev->fence_drv.lock, irq_flags); signaled = fence->signaled; /* if we are shuting down report all fence as signaled */ diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index b79ecc4a7cc4..2f349a300195 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -289,16 +289,16 @@ int radeon_irq_emit(struct drm_device *dev, void *data, struct drm_file *file_pr drm_radeon_irq_emit_t *emit = data; int result; - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600) - return -EINVAL; - - LOCK_TEST_WITH_RETURN(dev, file_priv); - if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600) + return -EINVAL; + + LOCK_TEST_WITH_RETURN(dev, file_priv); + result = radeon_emit_irq(dev); if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) { diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 4f8ea4260572..4245218e954f 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -396,7 +396,7 @@ int rs600_irq_process(struct radeon_device *rdev) } while (status || r500_disp_int) { /* SW interrupt */ - if (G_000040_SW_INT_EN(status)) + if (G_000044_SW_INT(status)) radeon_fence_process(rdev); /* Vertical blank interrupts */ if (G_007EDC_LB_D1_VBLANK_INTERRUPT(r500_disp_int)) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 46c3c566307e..07a0f030a3ec 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -792,6 +792,16 @@ config SENSORS_ADS7828 This driver can also be built as a module. If so, the module will be called ads7828. +config SENSORS_AMC6821 + tristate "Texas Instruments AMC6821" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Texas Instruments + AMC6821 hardware monitoring chips. + + This driver can also be build as a module. If so, the module + will be called amc6821. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 450c8e894277..4bc215c0953f 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o +obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c new file mode 100644 index 000000000000..1c89d922d619 --- /dev/null +++ b/drivers/hwmon/amc6821.c @@ -0,0 +1,1116 @@ +/* + amc6821.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si> + + Based on max6650.c: + Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include <linux/kernel.h> /* Needed for KERN_INFO */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> + + +/* + * Addresses to scan. + */ + +static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, + 0x4c, 0x4d, 0x4e, I2C_CLIENT_END}; + + + +/* + * Insmod parameters + */ + +static int pwminv = 0; /*Inverted PWM output. */ +module_param(pwminv, int, S_IRUGO); + +static int init = 1; /*Power-on initialization.*/ +module_param(init, int, S_IRUGO); + + +enum chips { amc6821 }; + +#define AMC6821_REG_DEV_ID 0x3D +#define AMC6821_REG_COMP_ID 0x3E +#define AMC6821_REG_CONF1 0x00 +#define AMC6821_REG_CONF2 0x01 +#define AMC6821_REG_CONF3 0x3F +#define AMC6821_REG_CONF4 0x04 +#define AMC6821_REG_STAT1 0x02 +#define AMC6821_REG_STAT2 0x03 +#define AMC6821_REG_TDATA_LOW 0x08 +#define AMC6821_REG_TDATA_HI 0x09 +#define AMC6821_REG_LTEMP_HI 0x0A +#define AMC6821_REG_RTEMP_HI 0x0B +#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15 +#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14 +#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19 +#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18 +#define AMC6821_REG_LTEMP_CRIT 0x1B +#define AMC6821_REG_RTEMP_CRIT 0x1D +#define AMC6821_REG_PSV_TEMP 0x1C +#define AMC6821_REG_DCY 0x22 +#define AMC6821_REG_LTEMP_FAN_CTRL 0x24 +#define AMC6821_REG_RTEMP_FAN_CTRL 0x25 +#define AMC6821_REG_DCY_LOW_TEMP 0x21 + +#define AMC6821_REG_TACH_LLIMITL 0x10 +#define AMC6821_REG_TACH_LLIMITH 0x11 +#define AMC6821_REG_TACH_HLIMITL 0x12 +#define AMC6821_REG_TACH_HLIMITH 0x13 + +#define AMC6821_CONF1_START 0x01 +#define AMC6821_CONF1_FAN_INT_EN 0x02 +#define AMC6821_CONF1_FANIE 0x04 +#define AMC6821_CONF1_PWMINV 0x08 +#define AMC6821_CONF1_FAN_FAULT_EN 0x10 +#define AMC6821_CONF1_FDRC0 0x20 +#define AMC6821_CONF1_FDRC1 0x40 +#define AMC6821_CONF1_THERMOVIE 0x80 + +#define AMC6821_CONF2_PWM_EN 0x01 +#define AMC6821_CONF2_TACH_MODE 0x02 +#define AMC6821_CONF2_TACH_EN 0x04 +#define AMC6821_CONF2_RTFIE 0x08 +#define AMC6821_CONF2_LTOIE 0x10 +#define AMC6821_CONF2_RTOIE 0x20 +#define AMC6821_CONF2_PSVIE 0x40 +#define AMC6821_CONF2_RST 0x80 + +#define AMC6821_CONF3_THERM_FAN_EN 0x80 +#define AMC6821_CONF3_REV_MASK 0x0F + +#define AMC6821_CONF4_OVREN 0x10 +#define AMC6821_CONF4_TACH_FAST 0x20 +#define AMC6821_CONF4_PSPR 0x40 +#define AMC6821_CONF4_MODE 0x80 + +#define AMC6821_STAT1_RPM_ALARM 0x01 +#define AMC6821_STAT1_FANS 0x02 +#define AMC6821_STAT1_RTH 0x04 +#define AMC6821_STAT1_RTL 0x08 +#define AMC6821_STAT1_R_THERM 0x10 +#define AMC6821_STAT1_RTF 0x20 +#define AMC6821_STAT1_LTH 0x40 +#define AMC6821_STAT1_LTL 0x80 + +#define AMC6821_STAT2_RTC 0x08 +#define AMC6821_STAT2_LTC 0x10 +#define AMC6821_STAT2_LPSV 0x20 +#define AMC6821_STAT2_L_THERM 0x40 +#define AMC6821_STAT2_THERM_IN 0x80 + +enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX, + IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN, + IDX_TEMP2_MAX, IDX_TEMP2_CRIT, + TEMP_IDX_LEN, }; + +static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI, + AMC6821_REG_LTEMP_LIMIT_MIN, + AMC6821_REG_LTEMP_LIMIT_MAX, + AMC6821_REG_LTEMP_CRIT, + AMC6821_REG_RTEMP_HI, + AMC6821_REG_RTEMP_LIMIT_MIN, + AMC6821_REG_RTEMP_LIMIT_MAX, + AMC6821_REG_RTEMP_CRIT, }; + +enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX, + FAN1_IDX_LEN, }; + +static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW, + AMC6821_REG_TACH_LLIMITL, + AMC6821_REG_TACH_HLIMITL, }; + + +static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, + AMC6821_REG_TACH_LLIMITH, + AMC6821_REG_TACH_HLIMITH, }; + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id); +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info); +static int amc6821_init_client(struct i2c_client *client); +static int amc6821_remove(struct i2c_client *client); +static struct amc6821_data *amc6821_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static const struct i2c_device_id amc6821_id[] = { + { "amc6821", amc6821 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, amc6821_id); + +static struct i2c_driver amc6821_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "amc6821", + }, + .probe = amc6821_probe, + .remove = amc6821_remove, + .id_table = amc6821_id, + .detect = amc6821_detect, + .address_list = normal_i2c, +}; + + +/* + * Client data (each client gets its own) + */ + +struct amc6821_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + int temp[TEMP_IDX_LEN]; + + u16 fan[FAN1_IDX_LEN]; + u8 fan1_div; + + u8 pwm1; + u8 temp1_auto_point_temp[3]; + u8 temp2_auto_point_temp[3]; + u8 pwm1_auto_point_pwm[3]; + u8 pwm1_enable; + u8 pwm1_auto_channels_temp; + + u8 stat1; + u8 stat2; +}; + + +static ssize_t get_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + + return sprintf(buf, "%d\n", data->temp[ix] * 1000); +} + + + +static ssize_t set_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int ix = to_sensor_dev_attr(attr)->index; + long val; + + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = SENSORS_LIMIT(val / 1000, -128, 127); + + mutex_lock(&data->update_lock); + data->temp[ix] = val; + if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + + + +static ssize_t get_temp_alarm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + u8 flag; + + switch (ix) { + case IDX_TEMP1_MIN: + flag = data->stat1 & AMC6821_STAT1_LTL; + break; + case IDX_TEMP1_MAX: + flag = data->stat1 & AMC6821_STAT1_LTH; + break; + case IDX_TEMP1_CRIT: + flag = data->stat2 & AMC6821_STAT2_LTC; + break; + case IDX_TEMP2_MIN: + flag = data->stat1 & AMC6821_STAT1_RTL; + break; + case IDX_TEMP2_MAX: + flag = data->stat1 & AMC6821_STAT1_RTH; + break; + case IDX_TEMP2_CRIT: + flag = data->stat2 & AMC6821_STAT2_RTC; + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + return -EINVAL; + } + if (flag) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + + +static ssize_t get_temp2_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_RTF) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + +static ssize_t get_pwm1( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1); +} + +static ssize_t set_pwm1( + struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1 = SENSORS_LIMIT(val , 0, 255); + i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_pwm1_enable( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_enable); +} + +static ssize_t set_pwm1_enable( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + + switch (val) { + case 1: + config &= ~AMC6821_CONF1_FDRC0; + config &= ~AMC6821_CONF1_FDRC1; + break; + case 2: + config &= ~AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + case 3: + config |= AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + default: + return -EINVAL; + } + mutex_lock(&data->update_lock); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + +static ssize_t get_pwm1_auto_channels_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp); +} + + +static ssize_t get_temp_auto_point_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr_2(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->nr; + struct amc6821_data *data = amc6821_update_device(dev); + switch (nr) { + case 1: + return sprintf(buf, "%d\n", + data->temp1_auto_point_temp[ix] * 1000); + break; + case 2: + return sprintf(buf, "%d\n", + data->temp2_auto_point_temp[ix] * 1000); + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } +} + + +static ssize_t get_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr(devattr)->index; + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]); +} + + +static inline ssize_t set_slope_register(struct i2c_client *client, + u8 reg, + u8 dpwm, + u8 *ptemp) +{ + int dt; + u8 tmp; + + dt = ptemp[2]-ptemp[1]; + for (tmp = 4; tmp > 0; tmp--) { + if (dt * (0x20 >> tmp) >= dpwm) + break; + } + tmp |= (ptemp[1] & 0x7C) << 1; + if (i2c_smbus_write_byte_data(client, + reg, tmp)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + return -EIO; + } + return 0; +} + + + +static ssize_t set_temp_auto_point_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr_2(attr)->index; + int nr = to_sensor_dev_attr_2(attr)->nr; + u8 *ptemp; + u8 reg; + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + switch (nr) { + case 1: + ptemp = data->temp1_auto_point_temp; + reg = AMC6821_REG_LTEMP_FAN_CTRL; + break; + case 2: + ptemp = data->temp2_auto_point_temp; + reg = AMC6821_REG_RTEMP_FAN_CTRL; + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } + + data->valid = 0; + mutex_lock(&data->update_lock); + switch (ix) { + case 0: + ptemp[0] = SENSORS_LIMIT(val / 1000, 0, + data->temp1_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, + data->temp2_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63); + if (i2c_smbus_write_byte_data( + client, + AMC6821_REG_PSV_TEMP, + ptemp[0])) { + dev_err(&client->dev, + "Register write error, aborting.\n"); + count = -EIO; + } + goto EXIT; + break; + case 1: + ptemp[1] = SENSORS_LIMIT( + val / 1000, + (ptemp[0] & 0x7C) + 4, + 124); + ptemp[1] &= 0x7C; + ptemp[2] = SENSORS_LIMIT( + ptemp[2], ptemp[1] + 1, + 255); + break; + case 2: + ptemp[2] = SENSORS_LIMIT( + val / 1000, + ptemp[1]+1, + 255); + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + count = -EINVAL; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, reg, dpwm, ptemp)) + count = -EIO; + +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t set_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP, + data->pwm1_auto_point_pwm[1])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm, + data->temp1_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm, + data->temp2_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + +EXIT: + data->valid = 0; + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_fan( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + if (0 == data->fan[ix]) + return sprintf(buf, "0"); + return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix])); +} + + + +static ssize_t get_fan1_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_FANS) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + +static ssize_t set_fan( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ix = to_sensor_dev_attr(attr)->index; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = 1 > val ? 0xFFFF : 6000000/val; + + mutex_lock(&data->update_lock); + data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF); + if (i2c_smbus_write_byte_data(client, fan_reg_low[ix], + data->fan[ix] & 0xFF)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, + fan_reg_hi[ix], data->fan[ix] >> 8)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t get_fan1_div( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->fan1_div); +} + +static ssize_t set_fan1_div( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + mutex_lock(&data->update_lock); + switch (val) { + case 2: + config &= ~AMC6821_CONF4_PSPR; + data->fan1_div = 2; + break; + case 4: + config |= AMC6821_CONF4_PSPR; + data->fan1_div = 4; + break; + default: + mutex_unlock(&data->update_lock); + count = -EINVAL; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, + get_temp, NULL, IDX_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR, + get_temp, NULL, IDX_TEMP2_INPUT); +static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, + get_temp2_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT); +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MIN); +static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MAX); +static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, + get_fan1_div, set_fan1_div, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0); +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + get_pwm1_enable, set_pwm1_enable, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 2); +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO, + get_pwm1_auto_channels_temp, NULL, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO, + get_temp_auto_point_temp, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2); + +static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2); + + + +static struct attribute *amc6821_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_max.dev_attr.attr, + &sensor_dev_attr_fan1_fault.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr, + NULL +}; + +static struct attribute_group amc6821_attr_grp = { + .attrs = amc6821_attrs, +}; + + + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; + int dev_id, comp_id; + + dev_dbg(&adapter->dev, "amc6821_detect called.\n"); + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&adapter->dev, + "amc6821: I2C bus doesn't support byte mode, " + "skipping.\n"); + return -ENODEV; + } + + dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + /* Bit 7 of the address register is ignored, so we can check the + ID registers again */ + dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address); + strlcpy(info->type, "amc6821", I2C_NAME_SIZE); + + return 0; +} + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct amc6821_data *data; + int err; + + data = kzalloc(sizeof(struct amc6821_data), GFP_KERNEL); + if (!data) { + dev_err(&client->dev, "out of memory.\n"); + return -ENOMEM; + } + + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* + * Initialize the amc6821 chip + */ + err = amc6821_init_client(client); + if (err) + goto err_free; + + err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp); + if (err) + goto err_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (!IS_ERR(data->hwmon_dev)) + return 0; + + err = PTR_ERR(data->hwmon_dev); + dev_err(&client->dev, "error registering hwmon device.\n"); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); +err_free: + kfree(data); + return err; +} + +static int amc6821_remove(struct i2c_client *client) +{ + struct amc6821_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); + + kfree(data); + + return 0; +} + + +static int amc6821_init_client(struct i2c_client *client) +{ + int config; + int err = -EIO; + + if (init) { + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config |= AMC6821_CONF4_MODE; + + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, + config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + dev_info(&client->dev, "Revision %d\n", config & 0x0f); + + config &= ~AMC6821_CONF3_THERM_FAN_EN; + + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3, + config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config &= ~AMC6821_CONF2_RTFIE; + config &= ~AMC6821_CONF2_LTOIE; + config &= ~AMC6821_CONF2_RTOIE; + if (i2c_smbus_write_byte_data(client, + AMC6821_REG_CONF2, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config &= ~AMC6821_CONF1_THERMOVIE; + config &= ~AMC6821_CONF1_FANIE; + config |= AMC6821_CONF1_START; + if (pwminv) + config |= AMC6821_CONF1_PWMINV; + else + config &= ~AMC6821_CONF1_PWMINV; + + if (i2c_smbus_write_byte_data( + client, AMC6821_REG_CONF1, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + } + return 0; +} + + +static struct amc6821_data *amc6821_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int timeout = HZ; + u8 reg; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + timeout) || + !data->valid) { + + for (i = 0; i < TEMP_IDX_LEN; i++) + data->temp[i] = i2c_smbus_read_byte_data(client, + temp_reg[i]); + + data->stat1 = i2c_smbus_read_byte_data(client, + AMC6821_REG_STAT1); + data->stat2 = i2c_smbus_read_byte_data(client, + AMC6821_REG_STAT2); + + data->pwm1 = i2c_smbus_read_byte_data(client, + AMC6821_REG_DCY); + for (i = 0; i < FAN1_IDX_LEN; i++) { + data->fan[i] = i2c_smbus_read_byte_data( + client, + fan_reg_low[i]); + data->fan[i] += i2c_smbus_read_byte_data( + client, + fan_reg_hi[i]) << 8; + } + data->fan1_div = i2c_smbus_read_byte_data(client, + AMC6821_REG_CONF4); + data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2; + + data->pwm1_auto_point_pwm[0] = 0; + data->pwm1_auto_point_pwm[2] = 255; + data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client, + AMC6821_REG_DCY_LOW_TEMP); + + data->temp1_auto_point_temp[0] = + i2c_smbus_read_byte_data(client, + AMC6821_REG_PSV_TEMP); + data->temp2_auto_point_temp[0] = + data->temp1_auto_point_temp[0]; + reg = i2c_smbus_read_byte_data(client, + AMC6821_REG_LTEMP_FAN_CTRL); + data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1; + reg &= 0x07; + reg = 0x20 >> reg; + if (reg > 0) + data->temp1_auto_point_temp[2] = + data->temp1_auto_point_temp[1] + + (data->pwm1_auto_point_pwm[2] - + data->pwm1_auto_point_pwm[1]) / reg; + else + data->temp1_auto_point_temp[2] = 255; + + reg = i2c_smbus_read_byte_data(client, + AMC6821_REG_RTEMP_FAN_CTRL); + data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1; + reg &= 0x07; + reg = 0x20 >> reg; + if (reg > 0) + data->temp2_auto_point_temp[2] = + data->temp2_auto_point_temp[1] + + (data->pwm1_auto_point_pwm[2] - + data->pwm1_auto_point_pwm[1]) / reg; + else + data->temp2_auto_point_temp[2] = 255; + + reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + reg = (reg >> 5) & 0x3; + switch (reg) { + case 0: /*open loop: software sets pwm1*/ + data->pwm1_auto_channels_temp = 0; + data->pwm1_enable = 1; + break; + case 2: /*closed loop: remote T (temp2)*/ + data->pwm1_auto_channels_temp = 2; + data->pwm1_enable = 2; + break; + case 3: /*closed loop: local and remote T (temp2)*/ + data->pwm1_auto_channels_temp = 3; + data->pwm1_enable = 3; + break; + case 1: /*semi-open loop: software sets rpm, chip controls pwm1, + *currently not implemented + */ + data->pwm1_auto_channels_temp = 0; + data->pwm1_enable = 0; + break; + } + + data->last_updated = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + + +static int __init amc6821_init(void) +{ + return i2c_add_driver(&amc6821_driver); +} + +static void __exit amc6821_exit(void) +{ + i2c_del_driver(&amc6821_driver); +} + +module_init(amc6821_init); +module_exit(amc6821_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>"); +MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver"); diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index fbdd73106000..cc9b5940fa97 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2083,7 +2083,7 @@ static int cma_get_port(struct rdma_id_private *id_priv) static int cma_check_linklocal(struct rdma_dev_addr *dev_addr, struct sockaddr *addr) { -#if defined(CONFIG_IPv6) || defined(CONFIG_IPV6_MODULE) +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) struct sockaddr_in6 *sin6; if (addr->sa_family != AF_INET6) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 989555cee883..2a97c964b9ef 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1752,7 +1752,7 @@ int mlx4_ib_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *wr, ind = qp->rq.head & (qp->rq.wqe_cnt - 1); for (nreq = 0; wr; ++nreq, wr = wr->next) { - if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.send_cq)) { + if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) { err = -ENOMEM; *bad_wr = wr; goto out; diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c index d42565258fb7..cf8085bcbd6d 100644 --- a/drivers/infiniband/hw/mlx4/srq.c +++ b/drivers/infiniband/hw/mlx4/srq.c @@ -74,6 +74,7 @@ struct ib_srq *mlx4_ib_create_srq(struct ib_pd *pd, struct mlx4_ib_dev *dev = to_mdev(pd->device); struct mlx4_ib_srq *srq; struct mlx4_wqe_srq_next_seg *next; + struct mlx4_wqe_data_seg *scatter; int desc_size; int buf_size; int err; @@ -149,6 +150,11 @@ struct ib_srq *mlx4_ib_create_srq(struct ib_pd *pd, next = get_wqe(srq, i); next->next_wqe_index = cpu_to_be16((i + 1) & (srq->msrq.max - 1)); + + for (scatter = (void *) (next + 1); + (void *) scatter < (void *) next + desc_size; + ++scatter) + scatter->lkey = cpu_to_be32(MLX4_INVALID_LKEY); } err = mlx4_mtt_init(dev->dev, srq->buf.npages, srq->buf.page_shift, diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 85f0e8cd875b..1f552c6e7579 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -85,7 +85,14 @@ static void mmc_blk_put(struct mmc_blk_data *md) mutex_lock(&open_lock); md->usage--; if (md->usage == 0) { + int devmaj = MAJOR(disk_devt(md->disk)); int devidx = MINOR(disk_devt(md->disk)) >> MMC_SHIFT; + + if (!devmaj) + devidx = md->disk->first_minor >> MMC_SHIFT; + + blk_cleanup_queue(md->queue.queue); + __clear_bit(devidx, dev_use); put_disk(md->disk); @@ -613,6 +620,7 @@ static int mmc_blk_probe(struct mmc_card *card) return 0; out: + mmc_cleanup_queue(&md->queue); mmc_blk_put(md); return err; diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 49e582356c65..c5a7a855f4b1 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -90,9 +90,10 @@ static void mmc_request(struct request_queue *q) struct request *req; if (!mq) { - printk(KERN_ERR "MMC: killing requests for dead queue\n"); - while ((req = blk_fetch_request(q)) != NULL) + while ((req = blk_fetch_request(q)) != NULL) { + req->cmd_flags |= REQ_QUIET; __blk_end_request_all(req, -EIO); + } return; } @@ -223,17 +224,18 @@ void mmc_cleanup_queue(struct mmc_queue *mq) struct request_queue *q = mq->queue; unsigned long flags; - /* Mark that we should start throwing out stragglers */ - spin_lock_irqsave(q->queue_lock, flags); - q->queuedata = NULL; - spin_unlock_irqrestore(q->queue_lock, flags); - /* Make sure the queue isn't suspended, as that will deadlock */ mmc_queue_resume(mq); /* Then terminate our worker thread */ kthread_stop(mq->thread); + /* Empty the queue */ + spin_lock_irqsave(q->queue_lock, flags); + q->queuedata = NULL; + blk_start_queue(q); + spin_unlock_irqrestore(q->queue_lock, flags); + if (mq->bounce_sg) kfree(mq->bounce_sg); mq->bounce_sg = NULL; @@ -245,8 +247,6 @@ void mmc_cleanup_queue(struct mmc_queue *mq) kfree(mq->bounce_buf); mq->bounce_buf = NULL; - blk_cleanup_queue(mq->queue); - mq->card = NULL; } EXPORT_SYMBOL(mmc_cleanup_queue); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c11189446a1f..0eac6c814904 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -207,7 +207,7 @@ static int mmc_read_ext_csd(struct mmc_card *card) } card->ext_csd.rev = ext_csd[EXT_CSD_REV]; - if (card->ext_csd.rev > 3) { + if (card->ext_csd.rev > 5) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), card->ext_csd.rev); diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index c37ee9e6b67b..39e1c0d39476 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -68,6 +68,7 @@ config W90P910_ETH tristate "Nuvoton w90p910 Ethernet support" depends on ARM && ARCH_W90X900 select PHYLIB + select MII help Say Y here if you want to use built-in Ethernet ports on w90p910 processor. diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 291a505fd4fc..3cf56d90d859 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1174,7 +1174,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; err_port: - for (port = 1; port <= dev->caps.num_ports; port++) + for (--port; port >= 1; --port) mlx4_cleanup_port_info(&priv->port[port]); mlx4_cleanup_mcg_table(dev); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1c01b96c9611..2d28d58200d0 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4684,6 +4684,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, INIT_WORK(&hw->restart_work, sky2_restart); pci_set_drvdata(pdev, hw); + pdev->d3_delay = 150; return 0; diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index c5df94e86678..807224ec8351 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -75,7 +75,8 @@ static ssize_t local_cpus_show(struct device *dev, int len; #ifdef CONFIG_NUMA - mask = cpumask_of_node(dev_to_node(dev)); + mask = (dev_to_node(dev) == -1) ? cpu_online_mask : + cpumask_of_node(dev_to_node(dev)); #else mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); #endif @@ -93,7 +94,8 @@ static ssize_t local_cpulist_show(struct device *dev, int len; #ifdef CONFIG_NUMA - mask = cpumask_of_node(dev_to_node(dev)); + mask = (dev_to_node(dev) == -1) ? cpu_online_mask : + cpumask_of_node(dev_to_node(dev)); #else mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); #endif diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0906599ebfde..315fea47e784 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -29,7 +29,17 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); -unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; +unsigned int pci_pm_d3_delay; + +static void pci_dev_d3_sleep(struct pci_dev *dev) +{ + unsigned int delay = dev->d3_delay; + + if (delay < pci_pm_d3_delay) + delay = pci_pm_d3_delay; + + msleep(delay); +} #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -522,7 +532,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(PCI_PM_D2_DELAY); @@ -1409,6 +1419,7 @@ void pci_pm_init(struct pci_dev *dev) } dev->pm_cap = pm; + dev->d3_delay = PCI_PM_D3_WAIT; dev->d1_support = false; dev->d2_support = false; @@ -2247,12 +2258,12 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D3hot; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D0; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); return 0; } diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 797d47809f7a..8c30a9544d61 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj) unsigned long flags; unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); int pos_cap_err, rp_pos_cap_err; - u32 sever; + u32 sever, mask; int ret = 0; dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn); @@ -374,6 +374,24 @@ static int aer_inject(struct aer_error_inj *einj) err->header_log2 = einj->header_log2; err->header_log3 = einj->header_log3; + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask); + if (einj->cor_status && !(einj->cor_status & ~mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The correctable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask); + if (einj->uncor_status && !(einj->uncor_status & ~mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The uncorrectable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + rperr = __find_aer_error_by_dev(rpdev); if (!rperr) { rperr = rperr_alloc; @@ -413,8 +431,14 @@ static int aer_inject(struct aer_error_inj *einj) if (ret) goto out_put; - if (find_aer_device(rpdev, &edev)) + if (find_aer_device(rpdev, &edev)) { + if (!get_service_data(edev)) { + printk(KERN_WARNING "AER service is not initialized\n"); + ret = -EINVAL; + goto out_put; + } aer_irq(-1, edev); + } else ret = -EINVAL; out_put: diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 413262eb95b7..b174188ac121 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -27,7 +27,7 @@ */ static void release_pcie_device(struct device *dev) { - kfree(to_pcie_device(dev)); + kfree(to_pcie_device(dev)); } /** @@ -346,12 +346,11 @@ static int suspend_iter(struct device *dev, void *data) { struct pcie_port_service_driver *service_driver; - if ((dev->bus == &pcie_port_bus_type) && - (dev->driver)) { - service_driver = to_service_driver(dev->driver); - if (service_driver->suspend) - service_driver->suspend(to_pcie_device(dev)); - } + if ((dev->bus == &pcie_port_bus_type) && dev->driver) { + service_driver = to_service_driver(dev->driver); + if (service_driver->suspend) + service_driver->suspend(to_pcie_device(dev)); + } return 0; } @@ -494,6 +493,7 @@ int pcie_port_service_register(struct pcie_port_service_driver *new) return driver_register(&new->driver); } +EXPORT_SYMBOL(pcie_port_service_register); /** * pcie_port_service_unregister - unregister PCI Express port service driver @@ -503,6 +503,4 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *drv) { driver_unregister(&drv->driver); } - -EXPORT_SYMBOL(pcie_port_service_register); EXPORT_SYMBOL(pcie_port_service_unregister); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 34d65172a4d7..13c8972886e6 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -63,7 +63,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { * pcie_portdrv_probe - Probe PCI-Express port devices * @dev: PCI-Express port device being probed * - * If detected invokes the pcie_port_device_register() method for + * If detected invokes the pcie_port_device_register() method for * this port device. * */ @@ -78,7 +78,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, (dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))) return -ENODEV; - if (!dev->irq && dev->pin) { + if (!dev->irq && dev->pin) { dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; " "check vendor BIOS\n", dev->vendor, dev->device); } @@ -91,7 +91,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, return 0; } -static void pcie_portdrv_remove (struct pci_dev *dev) +static void pcie_portdrv_remove(struct pci_dev *dev) { pcie_port_device_remove(dev); pci_disable_device(dev); @@ -129,14 +129,13 @@ static int error_detected_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev, enum pci_channel_state error) { - struct aer_broadcast_data result_data = - {error, PCI_ERS_RESULT_CAN_RECOVER}; - int retval; + struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER}; + int ret; /* can not fail */ - retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter); + ret = device_for_each_child(&dev->dev, &data, error_detected_iter); - return result_data.result; + return data.result; } static int mmio_enabled_iter(struct device *device, void *data) @@ -290,7 +289,7 @@ static int __init pcie_portdrv_init(void) return retval; } -static void __exit pcie_portdrv_exit(void) +static void __exit pcie_portdrv_exit(void) { pci_unregister_driver(&pcie_portdriver); pcie_port_bus_unregister(); diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 5b648f0c6075..ad4c414dbfbc 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -393,8 +393,6 @@ static void hp_wmi_notify(u32 value, void *context) } else printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n", eventcode); - - kfree(obj); } static int __init hp_wmi_input_setup(void) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index c8c12325e69b..e9aa814ddd23 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -1096,9 +1096,9 @@ static int cmos_pnp_resume(struct pnp_dev *pnp) #define cmos_pnp_resume NULL #endif -static void cmos_pnp_shutdown(struct device *pdev) +static void cmos_pnp_shutdown(struct pnp_dev *pnp) { - if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev)) + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pnp->dev)) return; cmos_do_shutdown(); @@ -1117,15 +1117,12 @@ static struct pnp_driver cmos_pnp_driver = { .id_table = rtc_ids, .probe = cmos_pnp_probe, .remove = __exit_p(cmos_pnp_remove), + .shutdown = cmos_pnp_shutdown, /* flag ensures resume() gets called, and stops syslog spam */ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, .suspend = cmos_pnp_suspend, .resume = cmos_pnp_resume, - .driver = { - .name = (char *)driver_name, - .shutdown = cmos_pnp_shutdown, - } }; #endif /* CONFIG_PNP */ diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index 26ffdcd5a437..15a00e8b7122 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1440,6 +1440,10 @@ void cxgb3i_c3cn_release(struct s3_conn *c3cn) static int is_cxgb3_dev(struct net_device *dev) { struct cxgb3i_sdev_data *cdata; + struct net_device *ndev = dev; + + if (dev->priv_flags & IFF_802_1Q_VLAN) + ndev = vlan_dev_real_dev(dev); write_lock(&cdata_rwlock); list_for_each_entry(cdata, &cdata_list, list) { @@ -1447,7 +1451,7 @@ static int is_cxgb3_dev(struct net_device *dev) int i; for (i = 0; i < ports->nports; i++) - if (dev == ports->lldevs[i]) { + if (ndev == ports->lldevs[i]) { write_unlock(&cdata_rwlock); return 1; } @@ -1566,6 +1570,26 @@ out_err: return -EINVAL; } +/** + * cxgb3i_find_dev - find the interface associated with the given address + * @ipaddr: ip address + */ +static struct net_device * +cxgb3i_find_dev(struct net_device *dev, __be32 ipaddr) +{ + struct flowi fl; + int err; + struct rtable *rt; + + memset(&fl, 0, sizeof(fl)); + fl.nl_u.ip4_u.daddr = ipaddr; + + err = ip_route_output_key(dev ? dev_net(dev) : &init_net, &rt, &fl); + if (!err) + return (&rt->u.dst)->dev; + + return NULL; +} /** * cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address @@ -1581,6 +1605,7 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn, struct cxgb3i_sdev_data *cdata; struct t3cdev *cdev; __be32 sipv4; + struct net_device *dstdev; int err; c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev); @@ -1591,6 +1616,13 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn, c3cn->daddr.sin_port = usin->sin_port; c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr; + dstdev = cxgb3i_find_dev(dev, usin->sin_addr.s_addr); + if (!dstdev || !is_cxgb3_dev(dstdev)) + return -ENETUNREACH; + + if (dstdev->priv_flags & IFF_802_1Q_VLAN) + dev = dstdev; + rt = find_route(dev, c3cn->saddr.sin_addr.s_addr, c3cn->daddr.sin_addr.s_addr, c3cn->saddr.sin_port, diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index ce522702a6c1..2cc39684ce97 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -4142,8 +4142,8 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, spin_lock_irq(shost->host_lock); if (vport->fc_rscn_flush) { /* Another thread is walking fc_rscn_id_list on this vport */ - spin_unlock_irq(shost->host_lock); vport->fc_flag |= FC_RSCN_DISCOVERY; + spin_unlock_irq(shost->host_lock); /* Send back ACC */ lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL); return 0; @@ -5948,8 +5948,8 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) lpfc_initial_fdisc(vport); break; } - } else { + vport->vpi_state |= LPFC_VPI_REGISTERED; if (vport == phba->pport) if (phba->sli_rev < LPFC_SLI_REV4) lpfc_issue_fabric_reglogin(vport); diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 3b9424427652..2445e399fd60 100755 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -747,6 +747,10 @@ lpfc_linkdown(struct lpfc_hba *phba) if (phba->link_state == LPFC_LINK_DOWN) return 0; + + /* Block all SCSI stack I/Os */ + lpfc_scsi_dev_block(phba); + spin_lock_irq(&phba->hbalock); phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED); if (phba->link_state > LPFC_LINK_DOWN) { @@ -1555,10 +1559,16 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) * to book keeping the FCFIs can be used. */ if (shdr_status || shdr_add_status) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2521 READ_FCF_RECORD mailbox failed " - "with status x%x add_status x%x, mbx\n", - shdr_status, shdr_add_status); + if (shdr_status == STATUS_FCF_TABLE_EMPTY) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2726 READ_FCF_RECORD Indicates empty " + "FCF table.\n"); + } else { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2521 READ_FCF_RECORD mailbox failed " + "with status x%x add_status x%x, mbx\n", + shdr_status, shdr_add_status); + } goto out; } /* Interpreting the returned information of FCF records */ @@ -1698,7 +1708,9 @@ lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) lpfc_vport_set_state(vport, FC_VPORT_FAILED); return; } + spin_lock_irq(&phba->hbalock); vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; + spin_unlock_irq(&phba->hbalock); if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) lpfc_initial_fdisc(vport); @@ -2259,7 +2271,10 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->mbxStatus); break; } + spin_lock_irq(&phba->hbalock); vport->vpi_state &= ~LPFC_VPI_REGISTERED; + vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(&phba->hbalock); vport->unreg_vpi_cmpl = VPORT_OK; mempool_free(pmb, phba->mbox_mem_pool); /* @@ -4475,8 +4490,10 @@ lpfc_unregister_unused_fcf(struct lpfc_hba *phba) (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { lpfc_mbx_unreg_vpi(vports[i]); + spin_lock_irq(&phba->hbalock); vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED; + spin_unlock_irq(&phba->hbalock); } lpfc_destroy_vport_work_array(phba, vports); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 1585148a17e5..8a2a1c5935c6 100644..100755 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1013,7 +1013,7 @@ struct lpfc_mbx_wq_destroy { }; #define LPFC_HDR_BUF_SIZE 128 -#define LPFC_DATA_BUF_SIZE 4096 +#define LPFC_DATA_BUF_SIZE 2048 struct rq_context { uint32_t word0; #define lpfc_rq_context_rq_size_SHIFT 16 @@ -1371,6 +1371,7 @@ struct lpfc_mbx_query_fw_cfg { #define STATUS_ERROR_ACITMAIN 0x2a #define STATUS_REBOOT_REQUIRED 0x2c #define STATUS_FCF_IN_USE 0x3a +#define STATUS_FCF_TABLE_EMPTY 0x43 struct lpfc_mbx_sli4_config { struct mbox_header header; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d4da6bdd0e73..b8eb1b6e5e77 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3006,6 +3006,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba, struct lpfc_vport *vport; struct lpfc_nodelist *ndlp; struct Scsi_Host *shost; + uint32_t link_state; phba->fc_eventTag = acqe_fcoe->event_tag; phba->fcoe_eventtag = acqe_fcoe->event_tag; @@ -3052,9 +3053,12 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba, break; /* * Currently, driver support only one FCF - so treat this as - * a link down. + * a link down, but save the link state because we don't want + * it to be changed to Link Down unless it is already down. */ + link_state = phba->link_state; lpfc_linkdown(phba); + phba->link_state = link_state; /* Unregister FCF if no devices connected to it */ lpfc_unregister_unused_fcf(phba); break; @@ -7226,8 +7230,6 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2711 PCI channel permanent disable for failure\n"); - /* Block all SCSI devices' I/Os on the host */ - lpfc_scsi_dev_block(phba); /* Clean up all driver's outstanding SCSI I/Os */ lpfc_sli_flush_fcp_rings(phba); } @@ -7256,6 +7258,9 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + switch (state) { case pci_channel_io_normal: /* Non-fatal error, prepare for recovery */ @@ -7507,6 +7512,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) error = -ENODEV; goto out_free_sysfs_attr; } + /* Default to single FCP EQ for non-MSI-X */ + if (phba->intr_type != MSIX) + phba->cfg_fcp_eq_count = 1; /* Set up SLI-4 HBA */ if (lpfc_sli4_hba_setup(phba)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 7935667b81a5..589549b2bf0e 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1383,7 +1383,7 @@ lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno, /* HBQ for ELS and CT traffic. */ static struct lpfc_hbq_init lpfc_els_hbq = { .rn = 1, - .entry_count = 200, + .entry_count = 256, .mask_count = 0, .profile = 0, .ring_mask = (1 << LPFC_ELS_RING), @@ -1482,8 +1482,11 @@ err: int lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) { - return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno, - lpfc_hbq_defs[qno]->add_count)); + if (phba->sli_rev == LPFC_SLI_REV4) + return 0; + else + return lpfc_sli_hbqbuf_fill_hbqs(phba, qno, + lpfc_hbq_defs[qno]->add_count); } /** @@ -1498,8 +1501,12 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) static int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) { - return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno, - lpfc_hbq_defs[qno]->init_count)); + if (phba->sli_rev == LPFC_SLI_REV4) + return lpfc_sli_hbqbuf_fill_hbqs(phba, qno, + lpfc_hbq_defs[qno]->entry_count); + else + return lpfc_sli_hbqbuf_fill_hbqs(phba, qno, + lpfc_hbq_defs[qno]->init_count); } /** @@ -4110,6 +4117,7 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, if (rc) { dma_free_coherent(&phba->pcidev->dev, dma_size, dmabuf->virt, dmabuf->phys); + kfree(dmabuf); return -EIO; } @@ -5848,7 +5856,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, iocbq->iocb.un.ulpWord[3]); wqe->generic.word3 = 0; bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext); - bf_set(wqe_xc, &wqe->generic, 1); /* The entire sequence is transmitted for this IOCB */ xmit_len = total_len; cmnd = CMD_XMIT_SEQUENCE64_CR; @@ -10944,7 +10951,8 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf) return dmabuf; } temp_hdr = seq_dmabuf->hbuf.virt; - if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) { + if (be16_to_cpu(new_hdr->fh_seq_cnt) < + be16_to_cpu(temp_hdr->fh_seq_cnt)) { list_del_init(&seq_dmabuf->hbuf.list); list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list); list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list); @@ -10955,6 +10963,11 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf) list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list); seq_dmabuf->time_stamp = jiffies; lpfc_update_rcv_time_stamp(vport); + if (list_empty(&seq_dmabuf->dbuf.list)) { + temp_hdr = dmabuf->hbuf.virt; + list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list); + return seq_dmabuf; + } /* find the correct place in the sequence to insert this frame */ list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) { temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf); @@ -10963,7 +10976,8 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf) * If the frame's sequence count is greater than the frame on * the list then insert the frame right after this frame */ - if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) { + if (be16_to_cpu(new_hdr->fh_seq_cnt) > + be16_to_cpu(temp_hdr->fh_seq_cnt)) { list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list); return seq_dmabuf; } @@ -11210,7 +11224,7 @@ lpfc_seq_complete(struct hbq_dmabuf *dmabuf) seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf); hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt; /* If there is a hole in the sequence count then fail. */ - if (++seq_count != hdr->fh_seq_cnt) + if (++seq_count != be16_to_cpu(hdr->fh_seq_cnt)) return 0; fctl = (hdr->fh_f_ctl[0] << 16 | hdr->fh_f_ctl[1] << 8 | @@ -11242,6 +11256,7 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf) struct lpfc_iocbq *first_iocbq, *iocbq; struct fc_frame_header *fc_hdr; uint32_t sid; + struct ulp_bde64 *pbde; fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt; /* remove from receive buffer list */ @@ -11283,8 +11298,9 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf) if (!iocbq->context3) { iocbq->context3 = d_buf; iocbq->iocb.ulpBdeCount++; - iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize = - LPFC_DATA_BUF_SIZE; + pbde = (struct ulp_bde64 *) + &iocbq->iocb.unsli3.sli3Words[4]; + pbde->tus.f.bdeSize = LPFC_DATA_BUF_SIZE; first_iocbq->iocb.unsli3.rcvsli3.acc_len += bf_get(lpfc_rcqe_length, &seq_dmabuf->cq_event.cqe.rcqe_cmpl); @@ -11401,15 +11417,9 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba, return; } /* If not last frame in sequence continue processing frames. */ - if (!lpfc_seq_complete(seq_dmabuf)) { - /* - * When saving off frames post a new one and mark this - * frame to be freed when it is finished. - **/ - lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1); - dmabuf->tag = -1; + if (!lpfc_seq_complete(seq_dmabuf)) return; - } + /* Send the complete sequence to the upper layer protocol */ lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf); } diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 25d66d070cf8..44e5f574236b 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -28,7 +28,7 @@ /* Multi-queue arrangement for fast-path FCP work queues */ #define LPFC_FN_EQN_MAX 8 #define LPFC_SP_EQN_DEF 1 -#define LPFC_FP_EQN_DEF 1 +#define LPFC_FP_EQN_DEF 4 #define LPFC_FP_EQN_MIN 1 #define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index c7f3aed2aab8..792f72263f1a 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.6" +#define LPFC_DRIVER_VERSION "8.3.7" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 7d6dd83d3592..e3c7fa642306 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -512,8 +512,10 @@ enable_vport(struct fc_vport *fc_vport) return VPORT_OK; } + spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_LOADING; vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(&phba->hbalock); /* Use the Physical nodes Fabric NDLP to determine if the link is * up and ready to FDISC. @@ -700,7 +702,7 @@ lpfc_vport_delete(struct fc_vport *fc_vport) } spin_unlock_irq(&phba->ndlp_lock); } - if (vport->vpi_state != LPFC_VPI_REGISTERED) + if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) goto skip_logo; vport->unreg_vpi_cmpl = VPORT_INVAL; timeout = msecs_to_jiffies(phba->fc_ratov * 2000); diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index e7d2688fbeba..b6f1ef954af1 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -2483,14 +2483,12 @@ static int pmcraid_error_handler(struct pmcraid_cmd *cmd) sense_copied = 1; } - if (RES_IS_GSCSI(res->cfg_entry)) { + if (RES_IS_GSCSI(res->cfg_entry)) pmcraid_cancel_all(cmd, sense_copied); - } else if (sense_copied) { + else if (sense_copied) pmcraid_erp_done(cmd); - return 0; - } else { + else pmcraid_request_sense(cmd); - } return 1; diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 21e2bc4d7401..3a9f5b288aee 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -232,6 +232,9 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, if (off) return 0; + if (unlikely(pci_channel_offline(ha->pdev))) + return 0; + if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1) return -EINVAL; if (start > ha->optrom_size) @@ -379,6 +382,9 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj, struct device, kobj))); struct qla_hw_data *ha = vha->hw; + if (unlikely(pci_channel_offline(ha->pdev))) + return 0; + if (!capable(CAP_SYS_ADMIN)) return 0; @@ -398,6 +404,9 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj, struct qla_hw_data *ha = vha->hw; uint8_t *tmp_data; + if (unlikely(pci_channel_offline(ha->pdev))) + return 0; + if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size || !ha->isp_ops->write_nvram) return 0; @@ -1238,10 +1247,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr, char *buf) { scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); - int rval; + int rval = QLA_FUNCTION_FAILED; uint16_t state[5]; - rval = qla2x00_get_firmware_state(vha, state); + if (!vha->hw->flags.eeh_busy) + rval = qla2x00_get_firmware_state(vha, state); if (rval != QLA_SUCCESS) memset(state, -1, sizeof(state)); @@ -1452,10 +1462,13 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport) if (!fcport) return; - if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) + if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags)) + return; + + if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) { qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16); - else - qla2x00_abort_fcport_cmds(fcport); + return; + } /* * Transport has effectively 'deleted' the rport, clear @@ -1475,6 +1488,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) if (!fcport) return; + if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags)) + return; + if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) { qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16); return; @@ -1515,6 +1531,12 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost) pfc_host_stat = &ha->fc_host_stat; memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics)); + if (test_bit(UNLOADING, &vha->dpc_flags)) + goto done; + + if (unlikely(pci_channel_offline(ha->pdev))) + goto done; + stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma); if (stats == NULL) { DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n", diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index f660dd70b72e..d6d9c86cb058 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -26,7 +26,7 @@ /* #define QL_DEBUG_LEVEL_14 */ /* Output RSCN trace msgs */ /* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */ /* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */ -/* #define QL_DEBUG_LEVEL_17 */ /* Output MULTI-Q trace messages */ +/* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */ /* * Macros use for debugging the driver. @@ -132,6 +132,13 @@ #else #define DEBUG16(x) do {} while (0) #endif + +#if defined(QL_DEBUG_LEVEL_17) +#define DEBUG17(x) do {x;} while (0) +#else +#define DEBUG17(x) do {} while (0) +#endif + /* * Firmware Dump structure definition */ diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 384afda7dbe9..608e675f68c8 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2256,11 +2256,13 @@ struct qla_hw_data { uint32_t disable_serdes :1; uint32_t gpsc_supported :1; uint32_t npiv_supported :1; + uint32_t pci_channel_io_perm_failure :1; uint32_t fce_enabled :1; uint32_t fac_supported :1; uint32_t chip_reset_done :1; uint32_t port0 :1; uint32_t running_gold_fw :1; + uint32_t eeh_busy :1; uint32_t cpu_affinity_enabled :1; uint32_t disable_msix_handshake :1; } flags; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 0b6801fc6389..f61fb8d01330 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -324,6 +324,7 @@ qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *); extern int qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t); +extern int qla2x00_get_data_rate(scsi_qla_host_t *); /* * Global Function Prototypes in qla_isr.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 73a793539d45..b4a0eac8f96d 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -269,6 +269,8 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) vha->flags.online = 0; ha->flags.chip_reset_done = 0; vha->flags.reset_active = 0; + ha->flags.pci_channel_io_perm_failure = 0; + ha->flags.eeh_busy = 0; atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); atomic_set(&vha->loop_state, LOOP_DOWN); vha->device_flags = DFLG_NO_CABLE; @@ -581,6 +583,9 @@ qla2x00_reset_chip(scsi_qla_host_t *vha) uint32_t cnt; uint16_t cmd; + if (unlikely(pci_channel_offline(ha->pdev))) + return; + ha->isp_ops->disable_intrs(ha); spin_lock_irqsave(&ha->hardware_lock, flags); @@ -786,6 +791,12 @@ void qla24xx_reset_chip(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; + + if (pci_channel_offline(ha->pdev) && + ha->flags.pci_channel_io_perm_failure) { + return; + } + ha->isp_ops->disable_intrs(ha); /* Perform RISC reset. */ @@ -2266,6 +2277,8 @@ qla2x00_configure_loop(scsi_qla_host_t *vha) clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); clear_bit(RSCN_UPDATE, &vha->dpc_flags); + qla2x00_get_data_rate(vha); + /* Determine what we need to do */ if (ha->current_topology == ISP_CFG_FL && (test_bit(LOCAL_LOOP_UPDATE, &flags))) { @@ -3560,6 +3573,13 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) /* Requeue all commands in outstanding command list. */ qla2x00_abort_all_cmds(vha, DID_RESET << 16); + if (unlikely(pci_channel_offline(ha->pdev) && + ha->flags.pci_channel_io_perm_failure)) { + clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); + status = 0; + return status; + } + ha->isp_ops->get_flash_version(vha, req->ring); ha->isp_ops->nvram_config(vha); @@ -4458,6 +4478,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) int ret, retries; struct qla_hw_data *ha = vha->hw; + if (ha->flags.pci_channel_io_perm_failure) + return; if (!IS_FWI2_CAPABLE(ha)) return; if (!ha->fw_major_version) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 1692a883f4de..ffd0efdff40e 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -152,7 +152,7 @@ qla2300_intr_handler(int irq, void *dev_id) for (iter = 50; iter--; ) { stat = RD_REG_DWORD(®->u.isp2300.host_status); if (stat & HSR_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) + if (unlikely(pci_channel_offline(ha->pdev))) break; hccr = RD_REG_WORD(®->hccr); @@ -1846,12 +1846,15 @@ qla24xx_intr_handler(int irq, void *dev_id) reg = &ha->iobase->isp24; status = 0; + if (unlikely(pci_channel_offline(ha->pdev))) + return IRQ_HANDLED; + spin_lock_irqsave(&ha->hardware_lock, flags); vha = pci_get_drvdata(ha->pdev); for (iter = 50; iter--; ) { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) + if (unlikely(pci_channel_offline(ha->pdev))) break; hccr = RD_REG_DWORD(®->hccr); @@ -1992,7 +1995,7 @@ qla24xx_msix_default(int irq, void *dev_id) do { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) + if (unlikely(pci_channel_offline(ha->pdev))) break; hccr = RD_REG_DWORD(®->hccr); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 05d595d9a7ef..056e4d4505f3 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -56,6 +56,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no)); + if (ha->flags.pci_channel_io_perm_failure) { + DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX " + "Exiting.\n", __func__, vha->host_no)); + return QLA_FUNCTION_TIMEOUT; + } + /* * Wait for active mailbox commands to finish by waiting at most tov * seconds. This is to serialize actual issuing of mailbox cmds during @@ -154,10 +160,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) /* Check for pending interrupts. */ qla2x00_poll(ha->rsp_q_map[0]); - if (command != MBC_LOAD_RISC_RAM_EXTENDED && - !ha->flags.mbox_int) + if (!ha->flags.mbox_int && + !(IS_QLA2200(ha) && + command == MBC_LOAD_RISC_RAM_EXTENDED)) msleep(10); } /* while */ + DEBUG17(qla_printk(KERN_WARNING, ha, + "Waited %d sec\n", + (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ))); } /* Check whether we timed out */ @@ -227,7 +237,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (rval == QLA_FUNCTION_TIMEOUT && mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) { - if (!io_lock_on || (mcp->flags & IOCTL_CMD)) { + if (!io_lock_on || (mcp->flags & IOCTL_CMD) || + ha->flags.eeh_busy) { /* not in dpc. schedule it for dpc to take over. */ DEBUG(printk("%s(%ld): timeout schedule " "isp_abort_needed.\n", __func__, @@ -237,7 +248,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) base_vha->host_no)); qla_printk(KERN_WARNING, ha, "Mailbox command timeout occurred. Scheduling ISP " - "abort.\n"); + "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy); set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); qla2xxx_wake_dpc(vha); } else if (!abort_active) { @@ -2530,6 +2541,9 @@ qla2x00_enable_eft_trace(scsi_qla_host_t *vha, dma_addr_t eft_dma, if (!IS_FWI2_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; @@ -2565,6 +2579,9 @@ qla2x00_disable_eft_trace(scsi_qla_host_t *vha) if (!IS_FWI2_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; @@ -2595,6 +2612,9 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *vha, dma_addr_t fce_dma, if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; @@ -2639,6 +2659,9 @@ qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd) if (!IS_FWI2_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; @@ -3643,3 +3666,36 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data) return rval; } + +int +qla2x00_get_data_rate(scsi_qla_host_t *vha) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + struct qla_hw_data *ha = vha->hw; + + if (!IS_FWI2_CAPABLE(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no)); + + mcp->mb[0] = MBC_DATA_RATE; + mcp->mb[1] = 0; + mcp->out_mb = MBX_1|MBX_0; + mcp->in_mb = MBX_2|MBX_1|MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk(KERN_INFO "%s(%ld): failed=%x mb[0]=%x.\n", + __func__, vha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(printk(KERN_INFO + "%s(%ld): done.\n", __func__, vha->host_no)); + if (mcp->mb[1] != 0x7) + ha->link_data_rate = mcp->mb[1]; + } + + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 2a4c7f4e7b69..b901aa267e7d 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -639,8 +639,10 @@ static void qla_do_work(struct work_struct *work) struct rsp_que *rsp = container_of(work, struct rsp_que, q_work); struct scsi_qla_host *vha; + spin_lock_irq(&rsp->hw->hardware_lock); vha = qla25xx_get_host(rsp); qla24xx_process_response_queue(vha, rsp); + spin_unlock_irq(&rsp->hw->hardware_lock); } /* create response queue */ diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2f873d237325..209f50e788a1 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -475,11 +475,11 @@ qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) srb_t *sp; int rval; - if (unlikely(pci_channel_offline(ha->pdev))) { - if (ha->pdev->error_state == pci_channel_io_frozen) - cmd->result = DID_REQUEUE << 16; - else + if (ha->flags.eeh_busy) { + if (ha->flags.pci_channel_io_perm_failure) cmd->result = DID_NO_CONNECT << 16; + else + cmd->result = DID_REQUEUE << 16; goto qc24_fail_command; } @@ -552,8 +552,15 @@ qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd) #define ABORT_POLLING_PERIOD 1000 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD)) unsigned long wait_iter = ABORT_WAIT_ITER; + scsi_qla_host_t *vha = shost_priv(cmd->device->host); + struct qla_hw_data *ha = vha->hw; int ret = QLA_SUCCESS; + if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) { + DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n")); + return ret; + } + while (CMD_SP(cmd) && wait_iter--) { msleep(ABORT_POLLING_PERIOD); } @@ -1810,6 +1817,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set ISP-type information. */ qla2x00_set_isp_flags(ha); + + /* Set EEH reset type to fundamental if required by hba */ + if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) { + pdev->needs_freset = 1; + pci_save_state(pdev); + } + /* Configure PCI I/O space */ ret = qla2x00_iospace_config(ha); if (ret) @@ -2174,6 +2188,24 @@ qla2x00_free_device(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; + qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); + + /* Disable timer */ + if (vha->timer_active) + qla2x00_stop_timer(vha); + + /* Kill the kernel thread for this host */ + if (ha->dpc_thread) { + struct task_struct *t = ha->dpc_thread; + + /* + * qla2xxx_wake_dpc checks for ->dpc_thread + * so we need to zero it out. + */ + ha->dpc_thread = NULL; + kthread_stop(t); + } + qla25xx_delete_queues(vha); if (ha->flags.fce_enabled) @@ -2185,6 +2217,8 @@ qla2x00_free_device(scsi_qla_host_t *vha) /* Stop currently executing firmware. */ qla2x00_try_to_stop_firmware(vha); + vha->flags.online = 0; + /* turn-off interrupts on the card */ if (ha->interrupts_on) ha->isp_ops->disable_intrs(ha); @@ -2859,6 +2893,13 @@ qla2x00_do_dpc(void *data) if (!base_vha->flags.init_done) continue; + if (ha->flags.eeh_busy) { + DEBUG17(qla_printk(KERN_WARNING, ha, + "qla2x00_do_dpc: dpc_flags: %lx\n", + base_vha->dpc_flags)); + continue; + } + DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no)); ha->dpc_active = 1; @@ -3049,8 +3090,13 @@ qla2x00_timer(scsi_qla_host_t *vha) int index; srb_t *sp; int t; + uint16_t w; struct qla_hw_data *ha = vha->hw; struct req_que *req; + + /* Hardware read to raise pending EEH errors during mailbox waits. */ + if (!pci_channel_offline(ha->pdev)) + pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w); /* * Ports - Port down timer. * @@ -3252,16 +3298,23 @@ qla2x00_release_firmware(void) static pci_ers_result_t qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { - scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); + scsi_qla_host_t *vha = pci_get_drvdata(pdev); + struct qla_hw_data *ha = vha->hw; + + DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n", + state)); switch (state) { case pci_channel_io_normal: + ha->flags.eeh_busy = 0; return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: + ha->flags.eeh_busy = 1; pci_disable_device(pdev); return PCI_ERS_RESULT_NEED_RESET; case pci_channel_io_perm_failure: - qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16); + ha->flags.pci_channel_io_perm_failure = 1; + qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); return PCI_ERS_RESULT_DISCONNECT; } return PCI_ERS_RESULT_NEED_RESET; @@ -3312,6 +3365,8 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) struct qla_hw_data *ha = base_vha->hw; int rc; + DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n")); + if (ha->mem_only) rc = pci_enable_device_mem(pdev); else @@ -3320,19 +3375,33 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) if (rc) { qla_printk(KERN_WARNING, ha, "Can't re-enable PCI device after reset.\n"); - return ret; } - pci_set_master(pdev); if (ha->isp_ops->pci_config(base_vha)) return ret; +#ifdef QL_DEBUG_LEVEL_17 + { + uint8_t b; + uint32_t i; + + printk("slot_reset_1: "); + for (i = 0; i < 256; i++) { + pci_read_config_byte(ha->pdev, i, &b); + printk("%s%02x", (i%16) ? " " : "\n", b); + } + printk("\n"); + } +#endif set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS) ret = PCI_ERS_RESULT_RECOVERED; clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); + DEBUG17(qla_printk(KERN_WARNING, ha, + "slot_reset-return:ret=%x\n", ret)); + return ret; } @@ -3343,12 +3412,17 @@ qla2xxx_pci_resume(struct pci_dev *pdev) struct qla_hw_data *ha = base_vha->hw; int ret; + DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n")); + ret = qla2x00_wait_for_hba_online(base_vha); if (ret != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "the device failed to resume I/O " "from slot/link_reset"); } + + ha->flags.eeh_busy = 0; + pci_cleanup_aer_uncorrect_error_status(pdev); } diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index c482220f7eed..a65dd95507c6 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.01-k8" +#define QLA2XXX_VERSION "8.03.01-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 3058bb1aff95..fd7b15be7640 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -623,6 +623,11 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) } break; case INQUIRY: + if (lun >= host->max_lun) { + cmd->result = DID_NO_CONNECT << 16; + done(cmd); + return 0; + } if (id != host->max_id - 1) break; if (!lun && !cmd->device->channel && diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 415858b421b3..825b665245bb 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1221,9 +1221,9 @@ static void setup_smart_timing(struct pxafb_info *fbi, static int pxafb_smart_thread(void *arg) { struct pxafb_info *fbi = arg; - struct pxafb_mach_info *inf; + struct pxafb_mach_info *inf = fbi->dev->platform_data; - if (!fbi || !fbi->dev->platform_data->smart_update) { + if (!inf->smart_update) { pr_err("%s: not properly initialized, thread terminated\n", __func__); return -EINVAL; diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 7dc85997e96c..c57d9ce5ff7e 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -171,6 +171,9 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, #ifdef ELF_FDPIC_PLAT_INIT unsigned long dynaddr; #endif +#ifndef CONFIG_MMU + unsigned long stack_prot; +#endif struct file *interpreter = NULL; /* to shut gcc up */ char *interpreter_name = NULL; int executable_stack; @@ -316,6 +319,8 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, * defunct, deceased, etc. after this point we have to exit via * error_kill */ set_personality(PER_LINUX_FDPIC); + if (elf_read_implies_exec(&exec_params.hdr, executable_stack)) + current->personality |= READ_IMPLIES_EXEC; set_binfmt(&elf_fdpic_format); current->mm->start_code = 0; @@ -377,9 +382,13 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, if (stack_size < PAGE_SIZE * 2) stack_size = PAGE_SIZE * 2; + stack_prot = PROT_READ | PROT_WRITE; + if (executable_stack == EXSTACK_ENABLE_X || + (executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC)) + stack_prot |= PROT_EXEC; + down_write(¤t->mm->mmap_sem); - current->mm->start_brk = do_mmap(NULL, 0, stack_size, - PROT_READ | PROT_WRITE | PROT_EXEC, + current->mm->start_brk = do_mmap(NULL, 0, stack_size, stack_prot, MAP_PRIVATE | MAP_ANONYMOUS | MAP_UNINITIALIZED | MAP_GROWSDOWN, 0); diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index 698a8636d39c..2afbcebeda71 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -738,13 +738,28 @@ static int exofs_write_begin_export(struct file *file, fsdata); } +static int exofs_write_end(struct file *file, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata) +{ + struct inode *inode = mapping->host; + /* According to comment in simple_write_end i_mutex is held */ + loff_t i_size = inode->i_size; + int ret; + + ret = simple_write_end(file, mapping,pos, len, copied, page, fsdata); + if (i_size != inode->i_size) + mark_inode_dirty(inode); + return ret; +} + const struct address_space_operations exofs_aops = { .readpage = exofs_readpage, .readpages = exofs_readpages, .writepage = exofs_writepage, .writepages = exofs_writepages, .write_begin = exofs_write_begin_export, - .write_end = simple_write_end, + .write_end = exofs_write_end, }; /****************************************************************************** diff --git a/fs/exofs/pnfs.h b/fs/exofs/pnfs.h index 423033addd1f..c52e9888b8ab 100644 --- a/fs/exofs/pnfs.h +++ b/fs/exofs/pnfs.h @@ -15,13 +15,7 @@ #ifndef __EXOFS_PNFS_H__ #define __EXOFS_PNFS_H__ -#if defined(CONFIG_PNFS) - - -/* FIXME: move this file to: linux/exportfs/pnfs_osd_xdr.h */ -#include "../nfs/objlayout/pnfs_osd_xdr.h" - -#else /* defined(CONFIG_PNFS) */ +#if ! defined(__PNFS_OSD_XDR_H__) enum pnfs_iomode { IOMODE_READ = 1, @@ -46,6 +40,6 @@ struct pnfs_osd_data_map { u32 odm_raid_algorithm; }; -#endif /* else defined(CONFIG_PNFS) */ +#endif /* ! defined(__PNFS_OSD_XDR_H__) */ #endif /* __EXOFS_PNFS_H__ */ diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 2c5ace4f00a7..3c7f03b669fb 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1615,6 +1615,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, goto out; new_dentry = dentry; + rehash = NULL; new_inode = NULL; } } diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 7c2e337d05af..c194793b642b 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -780,12 +780,9 @@ static inline int nfsd_dosync(struct file *filp, struct dentry *dp, int (*fsync) (struct file *, struct dentry *, int); int err; - err = filemap_fdatawrite(inode->i_mapping); + err = filemap_write_and_wait(inode->i_mapping); if (err == 0 && fop && (fsync = fop->fsync)) err = fsync(filp, dp, 0); - if (err == 0) - err = filemap_fdatawait(inode->i_mapping); - return err; } diff --git a/fs/proc/array.c b/fs/proc/array.c index f560325c444f..13b5d0708175 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -327,94 +327,6 @@ static inline void task_context_switch_counts(struct seq_file *m, p->nivcsw); } -#ifdef CONFIG_MMU - -struct stack_stats { - struct vm_area_struct *vma; - unsigned long startpage; - unsigned long usage; -}; - -static int stack_usage_pte_range(pmd_t *pmd, unsigned long addr, - unsigned long end, struct mm_walk *walk) -{ - struct stack_stats *ss = walk->private; - struct vm_area_struct *vma = ss->vma; - pte_t *pte, ptent; - spinlock_t *ptl; - int ret = 0; - - pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl); - for (; addr != end; pte++, addr += PAGE_SIZE) { - ptent = *pte; - -#ifdef CONFIG_STACK_GROWSUP - if (pte_present(ptent) || is_swap_pte(ptent)) - ss->usage = addr - ss->startpage + PAGE_SIZE; -#else - if (pte_present(ptent) || is_swap_pte(ptent)) { - ss->usage = ss->startpage - addr + PAGE_SIZE; - pte++; - ret = 1; - break; - } -#endif - } - pte_unmap_unlock(pte - 1, ptl); - cond_resched(); - return ret; -} - -static inline unsigned long get_stack_usage_in_bytes(struct vm_area_struct *vma, - struct task_struct *task) -{ - struct stack_stats ss; - struct mm_walk stack_walk = { - .pmd_entry = stack_usage_pte_range, - .mm = vma->vm_mm, - .private = &ss, - }; - - if (!vma->vm_mm || is_vm_hugetlb_page(vma)) - return 0; - - ss.vma = vma; - ss.startpage = task->stack_start & PAGE_MASK; - ss.usage = 0; - -#ifdef CONFIG_STACK_GROWSUP - walk_page_range(KSTK_ESP(task) & PAGE_MASK, vma->vm_end, - &stack_walk); -#else - walk_page_range(vma->vm_start, (KSTK_ESP(task) & PAGE_MASK) + PAGE_SIZE, - &stack_walk); -#endif - return ss.usage; -} - -static inline void task_show_stack_usage(struct seq_file *m, - struct task_struct *task) -{ - struct vm_area_struct *vma; - struct mm_struct *mm = get_task_mm(task); - - if (mm) { - down_read(&mm->mmap_sem); - vma = find_vma(mm, task->stack_start); - if (vma) - seq_printf(m, "Stack usage:\t%lu kB\n", - get_stack_usage_in_bytes(vma, task) >> 10); - - up_read(&mm->mmap_sem); - mmput(mm); - } -} -#else -static void task_show_stack_usage(struct seq_file *m, struct task_struct *task) -{ -} -#endif /* CONFIG_MMU */ - static void task_cpus_allowed(struct seq_file *m, struct task_struct *task) { seq_printf(m, "Cpus_allowed:\t"); @@ -445,7 +357,6 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns, task_show_regs(m, task); #endif task_context_switch_counts(m, task); - task_show_stack_usage(m, task); return 0; } diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 47c03f4336b8..f277c4a111cb 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -361,12 +361,11 @@ static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, if (!pte_present(ptent)) continue; - mss->resident += PAGE_SIZE; - page = vm_normal_page(vma, addr, ptent); if (!page) continue; + mss->resident += PAGE_SIZE; /* Accumulate the size in pages that have been accessed. */ if (pte_young(ptent) || PageReferenced(page)) mss->referenced += PAGE_SIZE; diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 1150ebb2536f..9087b10209e6 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -3062,13 +3062,14 @@ static ssize_t reiserfs_direct_IO(int rw, struct kiocb *iocb, int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) { struct inode *inode = dentry->d_inode; - int error; unsigned int ia_valid; + int depth; + int error; /* must be turned off for recursive notify_change calls */ ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID); - reiserfs_write_lock(inode->i_sb); + depth = reiserfs_write_lock_once(inode->i_sb); if (attr->ia_valid & ATTR_SIZE) { /* version 2 items will be caught by the s_maxbytes check ** done for us in vmtruncate @@ -3149,8 +3150,17 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) journal_end(&th, inode->i_sb, jbegin_count); } } - if (!error) + if (!error) { + /* + * Relax the lock here, as it might truncate the + * inode pages and wait for inode pages locks. + * To release such page lock, the owner needs the + * reiserfs lock + */ + reiserfs_write_unlock_once(inode->i_sb, depth); error = inode_setattr(inode, attr); + depth = reiserfs_write_lock_once(inode->i_sb); + } } if (!error && reiserfs_posixacl(inode->i_sb)) { @@ -3159,7 +3169,8 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) } out: - reiserfs_write_unlock(inode->i_sb); + reiserfs_write_unlock_once(inode->i_sb, depth); + return error; } diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c index ace77451ceb1..f53505de0712 100644 --- a/fs/reiserfs/ioctl.c +++ b/fs/reiserfs/ioctl.c @@ -104,9 +104,10 @@ setflags_out: err = put_user(inode->i_generation, (int __user *)arg); break; case REISERFS_IOC_SETVERSION: - if (!is_owner_or_cap(inode)) + if (!is_owner_or_cap(inode)) { err = -EPERM; break; + } err = mnt_want_write(filp->f_path.mnt); if (err) break; diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index c3b004ee627b..81f09fab8ae4 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -452,7 +452,9 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name) } if (dentry->d_inode) { + reiserfs_write_lock(inode->i_sb); err = xattr_unlink(xadir->d_inode, dentry); + reiserfs_write_unlock(inode->i_sb); update_ctime(inode); } @@ -486,17 +488,21 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, if (get_inode_sd_version(inode) == STAT_DATA_V1) return -EOPNOTSUPP; - if (!buffer) - return lookup_and_delete_xattr(inode, name); - reiserfs_write_unlock(inode->i_sb); + + if (!buffer) { + err = lookup_and_delete_xattr(inode, name); + reiserfs_write_lock(inode->i_sb); + return err; + } + dentry = xattr_lookup(inode, name, flags); if (IS_ERR(dentry)) { reiserfs_write_lock(inode->i_sb); return PTR_ERR(dentry); } - down_read(&REISERFS_I(inode)->i_xattr_sem); + down_write(&REISERFS_I(inode)->i_xattr_sem); reiserfs_write_lock(inode->i_sb); @@ -554,8 +560,12 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, .ia_size = buffer_size, .ia_valid = ATTR_SIZE | ATTR_CTIME, }; + + reiserfs_write_unlock(inode->i_sb); mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_XATTR); down_write(&dentry->d_inode->i_alloc_sem); + reiserfs_write_lock(inode->i_sb); + err = reiserfs_setattr(dentry, &newattrs); up_write(&dentry->d_inode->i_alloc_sem); mutex_unlock(&dentry->d_inode->i_mutex); diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c index cc32e6ada67b..dd20a7883f0f 100644 --- a/fs/reiserfs/xattr_acl.c +++ b/fs/reiserfs/xattr_acl.c @@ -455,7 +455,9 @@ int reiserfs_acl_chmod(struct inode *inode) return 0; } + reiserfs_write_unlock(inode->i_sb); acl = reiserfs_get_acl(inode, ACL_TYPE_ACCESS); + reiserfs_write_lock(inode->i_sb); if (!acl) return 0; if (IS_ERR(acl)) diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h index c40834bdee58..d4ded59d2ffe 100644 --- a/fs/xfs/linux-2.6/xfs_trace.h +++ b/fs/xfs/linux-2.6/xfs_trace.h @@ -815,7 +815,7 @@ TRACE_EVENT(name, \ ), \ TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \ "offset 0x%llx count %zd flags %s " \ - "startoff 0x%llx startblock 0x%llx blockcount 0x%llx", \ + "startoff 0x%llx startblock %s blockcount 0x%llx", \ MAJOR(__entry->dev), MINOR(__entry->dev), \ __entry->ino, \ __entry->size, \ @@ -824,7 +824,7 @@ TRACE_EVENT(name, \ __entry->count, \ __print_flags(__entry->flags, "|", BMAPI_FLAGS), \ __entry->startoff, \ - __entry->startblock, \ + xfs_fmtfsblock(__entry->startblock), \ __entry->blockcount) \ ) DEFINE_IOMAP_EVENT(xfs_iomap_enter); @@ -1201,7 +1201,7 @@ TRACE_EVENT(name, \ TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u " \ "prod %u minleft %u total %u alignment %u minalignslop %u " \ "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d " \ - "userdata %d firstblock 0x%llx", \ + "userdata %d firstblock %s", \ MAJOR(__entry->dev), MINOR(__entry->dev), \ __entry->agno, \ __entry->agbno, \ @@ -1220,7 +1220,7 @@ TRACE_EVENT(name, \ __entry->wasfromfl, \ __entry->isfl, \ __entry->userdata, \ - __entry->firstblock) \ + xfs_fmtfsblock(__entry->firstblock)) \ ) DEFINE_ALLOC_EVENT(xfs_alloc_exact_done); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 71dafb69cfeb..ffac157fb5b2 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1408,7 +1408,7 @@ extern int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info * gart_info); extern drm_dma_handle_t *drm_pci_alloc(struct drm_device *dev, size_t size, - size_t align, dma_addr_t maxaddr); + size_t align); extern void __drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah); extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah); diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index ec3f5e80a5df..b64a8d7cdf6d 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -188,6 +188,7 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GEM_MADVISE 0x26 #define DRM_I915_OVERLAY_PUT_IMAGE 0x27 #define DRM_I915_OVERLAY_ATTRS 0x28 +#define DRM_I915_GEM_EXECBUFFER2 0x29 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -207,6 +208,7 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t) #define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init) #define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer) +#define DRM_IOCTL_I915_GEM_EXECBUFFER2 DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2) #define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin) #define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin) #define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy) @@ -272,6 +274,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_NUM_FENCES_AVAIL 6 #define I915_PARAM_HAS_OVERLAY 7 #define I915_PARAM_HAS_PAGEFLIPPING 8 +#define I915_PARAM_HAS_EXECBUF2 9 typedef struct drm_i915_getparam { int param; @@ -567,6 +570,57 @@ struct drm_i915_gem_execbuffer { __u64 cliprects_ptr; }; +struct drm_i915_gem_exec_object2 { + /** + * User's handle for a buffer to be bound into the GTT for this + * operation. + */ + __u32 handle; + + /** Number of relocations to be performed on this buffer */ + __u32 relocation_count; + /** + * Pointer to array of struct drm_i915_gem_relocation_entry containing + * the relocations to be performed in this buffer. + */ + __u64 relocs_ptr; + + /** Required alignment in graphics aperture */ + __u64 alignment; + + /** + * Returned value of the updated offset of the object, for future + * presumed_offset writes. + */ + __u64 offset; + +#define EXEC_OBJECT_NEEDS_FENCE (1<<0) + __u64 flags; + __u64 rsvd1; + __u64 rsvd2; +}; + +struct drm_i915_gem_execbuffer2 { + /** + * List of gem_exec_object2 structs + */ + __u64 buffers_ptr; + __u32 buffer_count; + + /** Offset in the batchbuffer to start execution from. */ + __u32 batch_start_offset; + /** Bytes used in batchbuffer from batch_start_offset */ + __u32 batch_len; + __u32 DR1; + __u32 DR4; + __u32 num_cliprects; + /** This is a struct drm_clip_rect *cliprects */ + __u64 cliprects_ptr; + __u64 flags; /* currently unused */ + __u64 rsvd1; + __u64 rsvd2; +}; + struct drm_i915_gem_pin { /** Handle of the buffer to be pinned. */ __u32 handle; diff --git a/include/linux/decompress/unlzo.h b/include/linux/decompress/unlzo.h new file mode 100644 index 000000000000..987229752519 --- /dev/null +++ b/include/linux/decompress/unlzo.h @@ -0,0 +1,10 @@ +#ifndef DECOMPRESS_UNLZO_H +#define DECOMPRESS_UNLZO_H + +int unlzo(unsigned char *inbuf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *pos, + void(*error)(char *x)); +#endif diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 211ff4497269..ab2cc20e21a5 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -46,7 +46,7 @@ void kmap_flush_unused(void); static inline unsigned int nr_free_highpages(void) { return 0; } -#define totalhigh_pages 0 +#define totalhigh_pages 0UL #ifndef ARCH_HAS_KMAP static inline void *kmap(struct page *page) diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index fc5db826b48e..02c9af374741 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -89,4 +89,16 @@ struct adp5588_kpad_platform_data { unsigned short unlock_key2; /* Unlock Key 2 */ }; +struct adp5588_gpio_platform_data { + unsigned gpio_start; /* GPIO Chip base # */ + unsigned pullup_dis_mask; /* Pull-Up Disable Mask */ + int (*setup)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + void *context; +}; + #endif diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index 6adcc297e354..19ec41a183f5 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -29,8 +29,7 @@ struct pt_regs; * * On some architectures it is required to skip a breakpoint * exception when it occurs after a breakpoint has been removed. - * This can be implemented in the architecture specific portion of - * for kgdb. + * This can be implemented in the architecture specific portion of kgdb. */ extern int kgdb_skipexception(int exception, struct pt_regs *regs); @@ -65,7 +64,7 @@ struct uart_port; /** * kgdb_breakpoint - compiled in breakpoint * - * This will be impelmented a static inline per architecture. This + * This will be implemented as a static inline per architecture. This * function is called by the kgdb core to execute an architecture * specific trap to cause kgdb to enter the exception processing. * @@ -190,7 +189,7 @@ kgdb_arch_handle_exception(int vector, int signo, int err_code, * @flags: Current IRQ state * * On SMP systems, we need to get the attention of the other CPUs - * and get them be in a known state. This should do what is needed + * and get them into a known state. This should do what is needed * to get the other CPUs to call kgdb_wait(). Note that on some arches, * the NMI approach is not used for rounding up all the CPUs. For example, * in case of MIPS, smp_call_function() is used to roundup CPUs. In diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h index e880d4cf9e22..08d7dc4ddf40 100644 --- a/include/linux/kmemcheck.h +++ b/include/linux/kmemcheck.h @@ -36,6 +36,56 @@ int kmemcheck_hide_addr(unsigned long address); bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size); +/* + * Bitfield annotations + * + * How to use: If you have a struct using bitfields, for example + * + * struct a { + * int x:8, y:8; + * }; + * + * then this should be rewritten as + * + * struct a { + * kmemcheck_bitfield_begin(flags); + * int x:8, y:8; + * kmemcheck_bitfield_end(flags); + * }; + * + * Now the "flags_begin" and "flags_end" members may be used to refer to the + * beginning and end, respectively, of the bitfield (and things like + * &x.flags_begin is allowed). As soon as the struct is allocated, the bit- + * fields should be annotated: + * + * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL); + * kmemcheck_annotate_bitfield(a, flags); + */ +#define kmemcheck_bitfield_begin(name) \ + int name##_begin[0]; + +#define kmemcheck_bitfield_end(name) \ + int name##_end[0]; + +#define kmemcheck_annotate_bitfield(ptr, name) \ + do { \ + int _n; \ + \ + if (!ptr) \ + break; \ + \ + _n = (long) &((ptr)->name##_end) \ + - (long) &((ptr)->name##_begin); \ + MAYBE_BUILD_BUG_ON(_n < 0); \ + \ + kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \ + } while (0) + +#define kmemcheck_annotate_variable(var) \ + do { \ + kmemcheck_mark_initialized(&(var), sizeof(var)); \ + } while (0) \ + #else #define kmemcheck_enabled 0 @@ -106,60 +156,16 @@ static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size) return true; } -#endif /* CONFIG_KMEMCHECK */ - -/* - * Bitfield annotations - * - * How to use: If you have a struct using bitfields, for example - * - * struct a { - * int x:8, y:8; - * }; - * - * then this should be rewritten as - * - * struct a { - * kmemcheck_bitfield_begin(flags); - * int x:8, y:8; - * kmemcheck_bitfield_end(flags); - * }; - * - * Now the "flags_begin" and "flags_end" members may be used to refer to the - * beginning and end, respectively, of the bitfield (and things like - * &x.flags_begin is allowed). As soon as the struct is allocated, the bit- - * fields should be annotated: - * - * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL); - * kmemcheck_annotate_bitfield(a, flags); - * - * Note: We provide the same definitions for both kmemcheck and non- - * kmemcheck kernels. This makes it harder to introduce accidental errors. It - * is also allowed to pass NULL pointers to kmemcheck_annotate_bitfield(). - */ -#define kmemcheck_bitfield_begin(name) \ - int name##_begin[0]; - -#define kmemcheck_bitfield_end(name) \ - int name##_end[0]; +#define kmemcheck_bitfield_begin(name) +#define kmemcheck_bitfield_end(name) +#define kmemcheck_annotate_bitfield(ptr, name) \ + do { \ + } while (0) -#define kmemcheck_annotate_bitfield(ptr, name) \ - do { \ - int _n; \ - \ - if (!ptr) \ - break; \ - \ - _n = (long) &((ptr)->name##_end) \ - - (long) &((ptr)->name##_begin); \ - MAYBE_BUILD_BUG_ON(_n < 0); \ - \ - kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \ +#define kmemcheck_annotate_variable(var) \ + do { \ } while (0) -#define kmemcheck_annotate_variable(var) \ - do { \ - kmemcheck_mark_initialized(&(var), sizeof(var)); \ - } while (0) \ +#endif /* CONFIG_KMEMCHECK */ #endif /* LINUX_KMEMCHECK_H */ diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 84a524afb3dc..84d020bed083 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -123,6 +123,8 @@ struct vm_region { struct file *vm_file; /* the backing file or NULL */ atomic_t vm_usage; /* region usage count */ + bool vm_icache_flushed : 1; /* true if the icache has been flushed for + * this region */ }; /* diff --git a/include/linux/pci.h b/include/linux/pci.h index 5da0690d9cee..174e5392e51e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -243,6 +243,7 @@ struct pci_dev { unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ unsigned int wakeup_prepared:1; + unsigned int d3_delay; /* D3->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h index 6b58367d145e..d512d98dfb7d 100644 --- a/include/linux/uaccess.h +++ b/include/linux/uaccess.h @@ -94,6 +94,7 @@ static inline unsigned long __copy_from_user_nocache(void *to, * happens, handle that and return -EFAULT. */ extern long probe_kernel_read(void *dst, void *src, size_t size); +extern long __probe_kernel_read(void *dst, void *src, size_t size); /* * probe_kernel_write(): safely attempt to write to a location @@ -104,6 +105,7 @@ extern long probe_kernel_read(void *dst, void *src, size_t size); * Safely write to address @dst from the buffer at @src. If a kernel fault * happens, handle that and return -EFAULT. */ -extern long probe_kernel_write(void *dst, void *src, size_t size); +extern long notrace probe_kernel_write(void *dst, void *src, size_t size); +extern long notrace __probe_kernel_write(void *dst, void *src, size_t size); #endif /* __LINUX_UACCESS_H__ */ diff --git a/init/Kconfig b/init/Kconfig index a23da9f01803..d95ca7cd5d45 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -115,10 +115,13 @@ config HAVE_KERNEL_BZIP2 config HAVE_KERNEL_LZMA bool +config HAVE_KERNEL_LZO + bool + choice prompt "Kernel compression mode" default KERNEL_GZIP - depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA + depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO help The linux kernel is a kind of self-extracting executable. Several compression algorithms are available, which differ @@ -141,9 +144,8 @@ config KERNEL_GZIP bool "Gzip" depends on HAVE_KERNEL_GZIP help - The old and tried gzip compression. Its compression ratio is - the poorest among the 3 choices; however its speed (both - compression and decompression) is the fastest. + The old and tried gzip compression. It provides a good balance + between compression ratio and decompression speed. config KERNEL_BZIP2 bool "Bzip2" @@ -164,6 +166,14 @@ config KERNEL_LZMA two. Compression is slowest. The kernel size is about 33% smaller with LZMA in comparison to gzip. +config KERNEL_LZO + bool "LZO" + depends on HAVE_KERNEL_LZO + help + Its compression ratio is the poorest among the 4. The kernel + size is about about 10% bigger than gzip; however its speed + (both compression and decompression) is the fastest. + endchoice config SWAP diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 0249f4be9b5c..1fbcc748044a 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2468,7 +2468,6 @@ static struct cgroup_pidlist *cgroup_pidlist_find(struct cgroup *cgrp, /* make sure l doesn't vanish out from under us */ down_write(&l->mutex); mutex_unlock(&cgrp->pidlist_mutex); - l->use_count++; return l; } } diff --git a/kernel/kmod.c b/kernel/kmod.c index 25b103190364..bf0e231d9702 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -520,13 +520,15 @@ int call_usermodehelper_pipe(char *path, char **argv, char **envp, return -ENOMEM; ret = call_usermodehelper_stdinpipe(sub_info, filp); - if (ret < 0) - goto out; + if (ret < 0) { + call_usermodehelper_freeinfo(sub_info); + return ret; + } - return call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC); + ret = call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC); + if (ret < 0) /* Failed to execute helper, close pipe */ + filp_close(*filp, NULL); - out: - call_usermodehelper_freeinfo(sub_info); return ret; } EXPORT_SYMBOL(call_usermodehelper_pipe); diff --git a/kernel/module.c b/kernel/module.c index e96b8ed1cb6a..f82386bd9ee9 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1010,6 +1010,12 @@ static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs, * J. Corbet <corbet@lwn.net> */ #if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS) + +static inline bool sect_empty(const Elf_Shdr *sect) +{ + return !(sect->sh_flags & SHF_ALLOC) || sect->sh_size == 0; +} + struct module_sect_attr { struct module_attribute mattr; @@ -1051,8 +1057,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, /* Count loaded sections and allocate structures */ for (i = 0; i < nsect; i++) - if (sechdrs[i].sh_flags & SHF_ALLOC - && sechdrs[i].sh_size) + if (!sect_empty(&sechdrs[i])) nloaded++; size[0] = ALIGN(sizeof(*sect_attrs) + nloaded * sizeof(sect_attrs->attrs[0]), @@ -1070,9 +1075,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, sattr = §_attrs->attrs[0]; gattr = §_attrs->grp.attrs[0]; for (i = 0; i < nsect; i++) { - if (! (sechdrs[i].sh_flags & SHF_ALLOC)) - continue; - if (!sechdrs[i].sh_size) + if (sect_empty(&sechdrs[i])) continue; sattr->address = sechdrs[i].sh_addr; sattr->name = kstrdup(secstrings + sechdrs[i].sh_name, @@ -1156,7 +1159,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect, /* Count notes sections and allocate structures. */ notes = 0; for (i = 0; i < nsect; i++) - if ((sechdrs[i].sh_flags & SHF_ALLOC) && + if (!sect_empty(&sechdrs[i]) && (sechdrs[i].sh_type == SHT_NOTE)) ++notes; @@ -1172,7 +1175,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect, notes_attrs->notes = notes; nattr = ¬es_attrs->attrs[0]; for (loaded = i = 0; i < nsect; ++i) { - if (!(sechdrs[i].sh_flags & SHF_ALLOC)) + if (sect_empty(&sechdrs[i])) continue; if (sechdrs[i].sh_type == SHT_NOTE) { nattr->attr.name = mod->sect_attrs->attrs[loaded].name; diff --git a/kernel/signal.c b/kernel/signal.c index d09692b40376..934ae5e687b9 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -979,7 +979,8 @@ static void print_fatal_signal(struct pt_regs *regs, int signr) for (i = 0; i < 16; i++) { unsigned char insn; - __get_user(insn, (unsigned char *)(regs->ip + i)); + if (get_user(insn, (unsigned char *)(regs->ip + i))) + break; printk("%02x ", insn); } } diff --git a/lib/Kconfig b/lib/Kconfig index 1cfe51628e1b..97b136ff117e 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -117,6 +117,10 @@ config DECOMPRESS_BZIP2 config DECOMPRESS_LZMA tristate +config DECOMPRESS_LZO + select LZO_DECOMPRESS + tristate + # # Generic allocator support is selected if needed # diff --git a/lib/Makefile b/lib/Makefile index 347ad8db29d3..911b25aed1e7 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o +lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o obj-$(CONFIG_TEXTSEARCH) += textsearch.o obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o diff --git a/lib/decompress.c b/lib/decompress.c index d2842f571674..a7606815541f 100644 --- a/lib/decompress.c +++ b/lib/decompress.c @@ -9,6 +9,7 @@ #include <linux/decompress/bunzip2.h> #include <linux/decompress/unlzma.h> #include <linux/decompress/inflate.h> +#include <linux/decompress/unlzo.h> #include <linux/types.h> #include <linux/string.h> @@ -22,6 +23,9 @@ #ifndef CONFIG_DECOMPRESS_LZMA # define unlzma NULL #endif +#ifndef CONFIG_DECOMPRESS_LZO +# define unlzo NULL +#endif static const struct compress_format { unsigned char magic[2]; @@ -32,6 +36,7 @@ static const struct compress_format { { {037, 0236}, "gzip", gunzip }, { {0x42, 0x5a}, "bzip2", bunzip2 }, { {0x5d, 0x00}, "lzma", unlzma }, + { {0x89, 0x4c}, "lzo", unlzo }, { {0, 0}, NULL, NULL } }; diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c new file mode 100644 index 000000000000..db521f45626e --- /dev/null +++ b/lib/decompress_unlzo.c @@ -0,0 +1,209 @@ +/* + * LZO decompressor for the Linux kernel. Code borrowed from the lzo + * implementation by Markus Franz Xaver Johannes Oberhumer. + * + * Linux kernel adaptation: + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com> + * + * Original code: + * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer + * All Rights Reserved. + * + * lzop and the LZO library are free software; you can redistribute them + * and/or modify them under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Markus F.X.J. Oberhumer + * <markus@oberhumer.com> + * http://www.oberhumer.com/opensource/lzop/ + */ + +#ifdef STATIC +#include "lzo/lzo1x_decompress.c" +#else +#include <linux/slab.h> +#include <linux/decompress/unlzo.h> +#endif + +#include <linux/types.h> +#include <linux/lzo.h> +#include <linux/decompress/mm.h> + +#include <linux/compiler.h> +#include <asm/unaligned.h> + +static const unsigned char lzop_magic[] = { + 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a }; + +#define LZO_BLOCK_SIZE (256*1024l) +#define HEADER_HAS_FILTER 0x00000800L + +STATIC inline int INIT parse_header(u8 *input, u8 *skip) +{ + int l; + u8 *parse = input; + u8 level = 0; + u16 version; + + /* read magic: 9 first bits */ + for (l = 0; l < 9; l++) { + if (*parse++ != lzop_magic[l]) + return 0; + } + /* get version (2bytes), skip library version (2), + * 'need to be extracted' version (2) and + * method (1) */ + version = get_unaligned_be16(parse); + parse += 7; + if (version >= 0x0940) + level = *parse++; + if (get_unaligned_be32(parse) & HEADER_HAS_FILTER) + parse += 8; /* flags + filter info */ + else + parse += 4; /* flags */ + + /* skip mode and mtime_low */ + parse += 8; + if (version >= 0x0940) + parse += 4; /* skip mtime_high */ + + l = *parse++; + /* don't care about the file name, and skip checksum */ + parse += l + 4; + + *skip = parse - input; + return 1; +} + +STATIC inline int INIT unlzo(u8 *input, int in_len, + int (*fill) (void *, unsigned int), + int (*flush) (void *, unsigned int), + u8 *output, int *posp, + void (*error_fn) (char *x)) +{ + u8 skip = 0, r = 0; + u32 src_len, dst_len; + size_t tmp; + u8 *in_buf, *in_buf_save, *out_buf; + int obytes_processed = 0; + + set_error_fn(error_fn); + + if (output) { + out_buf = output; + } else if (!flush) { + error("NULL output pointer and no flush function provided"); + goto exit; + } else { + out_buf = malloc(LZO_BLOCK_SIZE); + if (!out_buf) { + error("Could not allocate output buffer"); + goto exit; + } + } + + if (input && fill) { + error("Both input pointer and fill function provided, don't know what to do"); + goto exit_1; + } else if (input) { + in_buf = input; + } else if (!fill || !posp) { + error("NULL input pointer and missing position pointer or fill function"); + goto exit_1; + } else { + in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE)); + if (!in_buf) { + error("Could not allocate input buffer"); + goto exit_1; + } + } + in_buf_save = in_buf; + + if (posp) + *posp = 0; + + if (fill) + fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE)); + + if (!parse_header(input, &skip)) { + error("invalid header"); + goto exit_2; + } + in_buf += skip; + + if (posp) + *posp = skip; + + for (;;) { + /* read uncompressed block size */ + dst_len = get_unaligned_be32(in_buf); + in_buf += 4; + + /* exit if last block */ + if (dst_len == 0) { + if (posp) + *posp += 4; + break; + } + + if (dst_len > LZO_BLOCK_SIZE) { + error("dest len longer than block size"); + goto exit_2; + } + + /* read compressed block size, and skip block checksum info */ + src_len = get_unaligned_be32(in_buf); + in_buf += 8; + + if (src_len <= 0 || src_len > dst_len) { + error("file corrupted"); + goto exit_2; + } + + /* decompress */ + tmp = dst_len; + r = lzo1x_decompress_safe((u8 *) in_buf, src_len, + out_buf, &tmp); + + if (r != LZO_E_OK || dst_len != tmp) { + error("Compressed data violation"); + goto exit_2; + } + + obytes_processed += dst_len; + if (flush) + flush(out_buf, dst_len); + if (output) + out_buf += dst_len; + if (posp) + *posp += src_len + 12; + if (fill) { + in_buf = in_buf_save; + fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE)); + } else + in_buf += src_len; + } + +exit_2: + if (!input) + free(in_buf); +exit_1: + if (!output) + free(out_buf); +exit: + return obytes_processed; +} + +#define decompress unlzo diff --git a/lib/dma-debug.c b/lib/dma-debug.c index cf906201aecf..7d2f0b33e5a8 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -913,6 +913,9 @@ static void check_sync(struct device *dev, ref->size); } + if (entry->direction == DMA_BIDIRECTIONAL) + goto out; + if (ref->direction != entry->direction) { err_printk(dev, entry, "DMA-API: device driver syncs " "DMA memory with different direction " @@ -923,9 +926,6 @@ static void check_sync(struct device *dev, dir2name[ref->direction]); } - if (entry->direction == DMA_BIDIRECTIONAL) - goto out; - if (to_cpu && !(entry->direction == DMA_FROM_DEVICE) && !(ref->direction == DMA_TO_DEVICE)) err_printk(dev, entry, "DMA-API: device driver syncs " @@ -948,7 +948,6 @@ static void check_sync(struct device *dev, out: put_hash_bucket(bucket, &flags); - } void debug_dma_map_page(struct device *dev, struct page *page, size_t offset, diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c index 5dc6b29c1575..f2fd09850223 100644 --- a/lib/lzo/lzo1x_decompress.c +++ b/lib/lzo/lzo1x_decompress.c @@ -11,11 +11,13 @@ * Richard Purdie <rpurdie@openedhand.com> */ +#ifndef STATIC #include <linux/module.h> #include <linux/kernel.h> -#include <linux/lzo.h> -#include <asm/byteorder.h> +#endif + #include <asm/unaligned.h> +#include <linux/lzo.h> #include "lzodefs.h" #define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x)) @@ -244,9 +246,10 @@ lookbehind_overrun: *out_len = op - out; return LZO_E_LOOKBEHIND_OVERRUN; } - +#ifndef STATIC EXPORT_SYMBOL_GPL(lzo1x_decompress_safe); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("LZO1X Decompressor"); +#endif diff --git a/lib/rational.c b/lib/rational.c index b3c099b5478e..3ed247b80662 100644 --- a/lib/rational.c +++ b/lib/rational.c @@ -7,6 +7,7 @@ */ #include <linux/rational.h> +#include <linux/module.h> /* * calculate best rational approximation for a given fraction diff --git a/lib/vsprintf.c b/lib/vsprintf.c index d4996cf46eb6..3b8aeec4e327 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -903,7 +903,7 @@ static char *uuid_string(char *buf, char *end, const u8 *addr, * IPv6 omits the colons (01020304...0f) * IPv4 uses dot-separated decimal with leading 0's (010.123.045.006) * - 'I6c' for IPv6 addresses printed as specified by - * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt + * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00 * - 'U' For a 16 byte UUID/GUID, it prints the UUID/GUID in the form * "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" * Options for %pU are: @@ -1188,7 +1188,7 @@ qualifier: * %pI6 print an IPv6 address with colons * %pi6 print an IPv6 address without colons * %pI6c print an IPv6 address as specified by - * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt + * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00 * %pU[bBlL] print a UUID/GUID in big or little endian using lower or upper * case. * %n is ignored diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c index 8550b0c05d00..05e1559fa156 100644 --- a/lib/zlib_inflate/inffast.c +++ b/lib/zlib_inflate/inffast.c @@ -4,6 +4,8 @@ */ #include <linux/zutil.h> +#include <asm/unaligned.h> +#include <asm/byteorder.h> #include "inftrees.h" #include "inflate.h" #include "inffast.h" @@ -24,9 +26,11 @@ #ifdef POSTINC # define OFF 0 # define PUP(a) *(a)++ +# define UP_UNALIGNED(a) get_unaligned((a)++) #else # define OFF 1 # define PUP(a) *++(a) +# define UP_UNALIGNED(a) get_unaligned(++(a)) #endif /* @@ -239,18 +243,47 @@ void inflate_fast(z_streamp strm, unsigned start) } } else { + unsigned short *sout; + unsigned long loops; + from = out - dist; /* copy direct from output */ - do { /* minimum length is three */ - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } while (len > 2); - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } + /* minimum length is three */ + /* Align out addr */ + if (!((long)(out - 1 + OFF) & 1)) { + PUP(out) = PUP(from); + len--; + } + sout = (unsigned short *)(out - OFF); + if (dist > 2) { + unsigned short *sfrom; + + sfrom = (unsigned short *)(from - OFF); + loops = len >> 1; + do + PUP(sout) = UP_UNALIGNED(sfrom); + while (--loops); + out = (unsigned char *)sout + OFF; + from = (unsigned char *)sfrom + OFF; + } else { /* dist == 1 or dist == 2 */ + unsigned short pat16; + + pat16 = *(sout-2+2*OFF); + if (dist == 1) +#if defined(__BIG_ENDIAN) + pat16 = (pat16 & 0xff) | ((pat16 & 0xff) << 8); +#elif defined(__LITTLE_ENDIAN) + pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00) >> 8); +#else +#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined +#endif + loops = len >> 1; + do + PUP(sout) = pat16; + while (--loops); + out = (unsigned char *)sout + OFF; + } + if (len & 1) + PUP(out) = PUP(from); } } else if ((op & 64) == 0) { /* 2nd level distance code */ diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 65f38c218207..e91b81b63670 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -402,7 +402,7 @@ static void clear_huge_page(struct page *page, { int i; - if (unlikely(sz > MAX_ORDER_NR_PAGES)) { + if (unlikely(sz/PAGE_SIZE > MAX_ORDER_NR_PAGES)) { clear_gigantic_page(page, addr, sz); return; } diff --git a/mm/maccess.c b/mm/maccess.c index 9073695ff25f..4e348dbaecd7 100644 --- a/mm/maccess.c +++ b/mm/maccess.c @@ -14,7 +14,11 @@ * Safely read from address @src to the buffer at @dst. If a kernel fault * happens, handle that and return -EFAULT. */ -long probe_kernel_read(void *dst, void *src, size_t size) + +long __weak probe_kernel_read(void *dst, void *src, size_t size) + __attribute__((alias("__probe_kernel_read"))); + +long __probe_kernel_read(void *dst, void *src, size_t size) { long ret; mm_segment_t old_fs = get_fs(); @@ -39,7 +43,10 @@ EXPORT_SYMBOL_GPL(probe_kernel_read); * Safely write to address @dst from the buffer at @src. If a kernel fault * happens, handle that and return -EFAULT. */ -long notrace __weak probe_kernel_write(void *dst, void *src, size_t size) +long __weak probe_kernel_write(void *dst, void *src, size_t size) + __attribute__((alias("__probe_kernel_write"))); + +long __probe_kernel_write(void *dst, void *src, size_t size) { long ret; mm_segment_t old_fs = get_fs(); diff --git a/mm/nommu.c b/mm/nommu.c index 6f9248f89bde..17773862619b 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -432,6 +432,7 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) /* * Ok, looks good - let it rip. */ + flush_icache_range(mm->brk, brk); return mm->brk = brk; } @@ -1353,10 +1354,14 @@ unsigned long do_mmap_pgoff(struct file *file, share: add_vma_to_mm(current->mm, vma); - up_write(&nommu_region_sem); + /* we flush the region from the icache only when the first executable + * mapping of it is made */ + if (vma->vm_flags & VM_EXEC && !region->vm_icache_flushed) { + flush_icache_range(region->vm_start, region->vm_end); + region->vm_icache_flushed = true; + } - if (prot & PROT_EXEC) - flush_icache_range(result, result + len); + up_write(&nommu_region_sem); kleave(" = %lx", result); return result; @@ -1916,9 +1921,11 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, in /* only read or write mappings where it is permitted */ if (write && vma->vm_flags & VM_MAYWRITE) - len -= copy_to_user((void *) addr, buf, len); + copy_to_user_page(vma, NULL, addr, + (void *) addr, buf, len); else if (!write && vma->vm_flags & VM_MAYREAD) - len -= copy_from_user(buf, (void *) addr, len); + copy_from_user_page(vma, NULL, addr, + buf, (void *) addr, len); else len = 0; } else { diff --git a/mm/percpu.c b/mm/percpu.c index 442010cc91c6..083e7c91e5f6 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1271,7 +1271,7 @@ static void pcpu_reclaim(struct work_struct *work) */ void free_percpu(void *ptr) { - void *addr = __pcpu_ptr_to_addr(ptr); + void *addr; struct pcpu_chunk *chunk; unsigned long flags; int off; @@ -1279,6 +1279,8 @@ void free_percpu(void *ptr) if (!ptr) return; + addr = __pcpu_ptr_to_addr(ptr); + spin_lock_irqsave(&pcpu_lock, flags); chunk = pcpu_chunk_addr_search(addr); diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 3c3c50f38a1c..f7a7f8380e38 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -644,7 +644,22 @@ gss_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) p = gss_fill_context(p, end, ctx, gss_msg->auth->mech); if (IS_ERR(p)) { err = PTR_ERR(p); - gss_msg->msg.errno = (err == -EAGAIN) ? -EAGAIN : -EACCES; + switch (err) { + case -EACCES: + gss_msg->msg.errno = err; + err = mlen; + break; + case -EFAULT: + case -ENOMEM: + case -EINVAL: + case -ENOSYS: + gss_msg->msg.errno = -EAGAIN; + break; + default: + printk(KERN_CRIT "%s: bad return from " + "gss_fill_context: %zd\n", __func__, err); + BUG(); + } goto err_release_msg; } gss_msg->ctx = gss_get_ctx(ctx); diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index ef45eba22485..2deb0ed72ff4 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -131,8 +131,10 @@ gss_import_sec_context_kerberos(const void *p, struct krb5_ctx *ctx; int tmp; - if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS))) + if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS))) { + p = ERR_PTR(-ENOMEM); goto out_err; + } p = simple_get_bytes(p, end, &ctx->initiate, sizeof(ctx->initiate)); if (IS_ERR(p)) diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c index 6efbb0cd3c7c..76e4c6f4ac3c 100644 --- a/net/sunrpc/auth_gss/gss_mech_switch.c +++ b/net/sunrpc/auth_gss/gss_mech_switch.c @@ -252,7 +252,7 @@ gss_import_sec_context(const void *input_token, size_t bufsize, struct gss_ctx **ctx_id) { if (!(*ctx_id = kzalloc(sizeof(**ctx_id), GFP_KERNEL))) - return GSS_S_FAILURE; + return -ENOMEM; (*ctx_id)->mech_type = gss_mech_get(mech); return mech->gm_ops diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 1c924ee0a1ef..7d1f9e928f69 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -699,7 +699,8 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) spin_unlock_bh(&pool->sp_lock); len = 0; - if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) { + if (test_bit(XPT_LISTENER, &xprt->xpt_flags) && + !test_bit(XPT_CLOSE, &xprt->xpt_flags)) { struct svc_xprt *newxpt; newxpt = xprt->xpt_ops->xpo_accept(xprt); if (newxpt) { diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index cd815ac2a50b..0fe48cd91ffa 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -235,3 +235,8 @@ quiet_cmd_lzma = LZMA $@ cmd_lzma = (cat $(filter-out FORCE,$^) | \ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ (rm -f $@ ; false) + +quiet_cmd_lzo = LZO $@ +cmd_lzo = (cat $(filter-out FORCE,$^) | \ + lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 445e8845f0a4..090f24839700 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -296,46 +296,56 @@ my @status = (); foreach my $file (@files) { -#Do not match excluded file patterns - - my $exclude = 0; - foreach my $line (@typevalue) { - if ($line =~ m/^(\C):\s*(.*)/) { - my $type = $1; - my $value = $2; - if ($type eq 'X') { - if (file_match_pattern($file, $value)) { - $exclude = 1; - last; - } - } - } - } + my %hash; + my $tvi = find_first_section(); + while ($tvi < @typevalue) { + my $start = find_starting_index($tvi); + my $end = find_ending_index($tvi); + my $exclude = 0; + my $i; + + #Do not match excluded file patterns - if (!$exclude) { - my $tvi = 0; - my %hash; - foreach my $line (@typevalue) { + for ($i = $start; $i < $end; $i++) { + my $line = $typevalue[$i]; if ($line =~ m/^(\C):\s*(.*)/) { my $type = $1; my $value = $2; - if ($type eq 'F') { + if ($type eq 'X') { if (file_match_pattern($file, $value)) { - my $value_pd = ($value =~ tr@/@@); - my $file_pd = ($file =~ tr@/@@); - $value_pd++ if (substr($value,-1,1) ne "/"); - if ($pattern_depth == 0 || - (($file_pd - $value_pd) < $pattern_depth)) { - $hash{$tvi} = $value_pd; - } + $exclude = 1; } } } - $tvi++; } - foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) { - add_categories($line); + + if (!$exclude) { + for ($i = $start; $i < $end; $i++) { + my $line = $typevalue[$i]; + if ($line =~ m/^(\C):\s*(.*)/) { + my $type = $1; + my $value = $2; + if ($type eq 'F') { + if (file_match_pattern($file, $value)) { + my $value_pd = ($value =~ tr@/@@); + my $file_pd = ($file =~ tr@/@@); + $value_pd++ if (substr($value,-1,1) ne "/"); + if ($pattern_depth == 0 || + (($file_pd - $value_pd) < $pattern_depth)) { + $hash{$tvi} = $value_pd; + } + } + } + } + } } + + $tvi += ($end - $start); + + } + + foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) { + add_categories($line); } if ($email && $email_git) { @@ -570,6 +580,20 @@ sub format_email { return $formatted_email; } +sub find_first_section { + my $index = 0; + + while ($index < @typevalue) { + my $tv = $typevalue[$index]; + if (($tv =~ m/^(\C):\s*(.*)/)) { + last; + } + $index++; + } + + return $index; +} + sub find_starting_index { my ($index) = @_; diff --git a/usr/Kconfig b/usr/Kconfig index 1c3039f28909..e2721f5a3504 100644 --- a/usr/Kconfig +++ b/usr/Kconfig @@ -72,6 +72,15 @@ config RD_LZMA Support loading of a LZMA encoded initial ramdisk or cpio buffer If unsure, say N. +config RD_LZO + bool "Support initial ramdisks compressed using LZO" if EMBEDDED + default !EMBEDDED + depends on BLK_DEV_INITRD + select DECOMPRESS_LZO + help + Support loading of a LZO encoded initial ramdisk or cpio buffer + If unsure, say N. + choice prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!="" help @@ -108,16 +117,15 @@ config INITRAMFS_COMPRESSION_GZIP bool "Gzip" depends on RD_GZIP help - The old and tried gzip compression. Its compression ratio is - the poorest among the 3 choices; however its speed (both - compression and decompression) is the fastest. + The old and tried gzip compression. It provides a good balance + between compression ratio and decompression speed. config INITRAMFS_COMPRESSION_BZIP2 bool "Bzip2" depends on RD_BZIP2 help Its compression ratio and speed is intermediate. - Decompression speed is slowest among the three. The initramfs + Decompression speed is slowest among the four. The initramfs size is about 10% smaller with bzip2, in comparison to gzip. Bzip2 uses a large amount of memory. For modern kernels you will need at least 8MB RAM or more for booting. @@ -128,7 +136,15 @@ config INITRAMFS_COMPRESSION_LZMA help The most recent compression algorithm. Its ratio is best, decompression speed is between the other - two. Compression is slowest. The initramfs size is about 33% + three. Compression is slowest. The initramfs size is about 33% smaller with LZMA in comparison to gzip. +config INITRAMFS_COMPRESSION_LZO + bool "LZO" + depends on RD_LZO + help + Its compression ratio is the poorest among the four. The kernel + size is about about 10% bigger than gzip; however its speed + (both compression and decompression) is the fastest. + endchoice |