diff options
126 files changed, 172 insertions, 172 deletions
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index bf5fc59a6938..088584a98cf4 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -62,7 +62,7 @@ pmu_system_controller: system-controller@10040000 { Example of clock consumer : -usb3503: usb3503@08 { +usb3503: usb3503@8 { /* ... */ clock-names = "refclk"; clocks = <&pmu_system_controller 0>; diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 3c551894f621..fa674818e7e8 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -71,7 +71,7 @@ Optional nodes: - compatible: only "samsung,secure-firmware" is currently supported - reg: address of non-secure SYSRAM used for communication with firmware - firmware@0203F000 { + firmware@203F000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt index 6808fb5dee40..1b2ab1ff5587 100644 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ b/Documentation/devicetree/bindings/arm/sp810.txt @@ -33,7 +33,7 @@ Required properties: property with the highest frequency Example: - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 00318d083c9e..50095802fb4a 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -37,7 +37,7 @@ Example: compatible = "arm,vexpress-sysreg"; reg = <0x10000000 0x1000>; - v2m_led_gpios: sys_led@08 { + v2m_led_gpios: sys_led@8 { compatible = "arm,vexpress-sysreg,sys_led"; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index fedc213b5f1a..c760ecb81381 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -56,7 +56,7 @@ Examples: interrupts = <115>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = <56>; diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt index fa511db18408..a3d14719e478 100644 --- a/Documentation/devicetree/bindings/ata/imx-sata.txt +++ b/Documentation/devicetree/bindings/ata/imx-sata.txt @@ -25,7 +25,7 @@ Optional properties: Examples: -sata@02200000 { +sata@2200000 { compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 6630d842c7a3..683eaf3aed79 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -61,7 +61,7 @@ Timing property for child nodes. It is mandatory, not optional. Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: - weim: weim@021b8000 { + weim: weim@21b8000 { compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; clocks = <&clks 196>; diff --git a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt index 3dd28343b6ce..eb3ed628c6f1 100644 --- a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt +++ b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt @@ -28,7 +28,7 @@ which can normally be found in the datasheet. Example: - rsb@01f03400 { + rsb@1f03400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt index 27468119fd94..4cd81742038f 100644 --- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt +++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt @@ -59,7 +59,7 @@ syscon: syscon@10000000 { compatible = "syscon"; reg = <0x10000000 0x1000>; - oscclk0: osc0@0c { + oscclk0: osc0@c { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 0c3d6015868d..2cba012f5af0 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -80,7 +80,7 @@ Example 3: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,i2s-v5"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt index 4fc869b69d4a..f6272dcd96f4 100644 --- a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt @@ -43,7 +43,7 @@ Example: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { /* ... */ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt index e3eb0f657c5e..217871f483c0 100644 --- a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt +++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt @@ -21,7 +21,7 @@ Required properties: a size of 8. - #clock-cells : from common clock binding; shall be set to 1 -divider_clk: core-clock@0064 { +divider_clk: core-clock@64 { compatible = "marvell,dove-divider-clock"; reg = <0x0064 0x8>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt index b7adf4e3ea98..9823baf7acb6 100644 --- a/Documentation/devicetree/bindings/clock/imx1-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt @@ -10,13 +10,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h for the full list of i.MX1 clock IDs. Examples: - clks: ccm@0021b000 { + clks: ccm@21b000 { #clock-cells = <1>; compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; }; - pwm: pwm@00208000 { + pwm: pwm@208000 { #pwm-cells = <2>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index aa0a4d423ef5..a45ca67a9d5f 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -14,14 +14,14 @@ Examples: #include <dt-bindings/clock/imx6qdl-clock.h> -clks: ccm@020c4000 { +clks: ccm@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; #clock-cells = <1>; }; -uart1: serial@02020000 { +uart1: serial@2020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 8398a3a5e106..3472b461ca93 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -46,7 +46,7 @@ Example: /* ... */ Node of the MFD chip - max77686: max77686@09 { + max77686: max77686@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; @@ -71,7 +71,7 @@ Example: /* ... */ Node of the MFD chip - max77802: max77802@09 { + max77802: max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index c35390f60545..7364953d0d0b 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -42,7 +42,7 @@ Required properties: Example: - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 7eda08eb8a1e..4ca21c3a6fc9 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -36,7 +36,7 @@ For the PRCM CCUs on A83T/H3/A64, two more clocks are needed: - "iosc": the SoC's internal frequency oscillator Example for generic CCU: -ccu: clock@01c20000 { +ccu: clock@1c20000 { compatible = "allwinner,sun8i-h3-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -46,7 +46,7 @@ ccu: clock@01c20000 { }; Example for PRCM CCU: -r_ccu: clock@01f01400 { +r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 8f7619d8c8d8..1a042e20b115 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -137,7 +137,7 @@ the address block, which is related to the overall mmc block. For example: -osc24M: clk@01c20050 { +osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-osc-clk"; reg = <0x01c20050 0x4>; @@ -145,7 +145,7 @@ osc24M: clk@01c20050 { clock-output-names = "osc24M"; }; -pll1: clk@01c20000 { +pll1: clk@1c20000 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; reg = <0x01c20000 0x4>; @@ -153,7 +153,7 @@ pll1: clk@01c20000 { clock-output-names = "pll1"; }; -pll5: clk@01c20020 { +pll5: clk@1c20020 { #clock-cells = <1>; compatible = "allwinner,sun4i-pll5-clk"; reg = <0x01c20020 0x4>; @@ -161,7 +161,7 @@ pll5: clk@01c20020 { clock-output-names = "pll5_ddr", "pll5_other"; }; -pll6: clk@01c20028 { +pll6: clk@1c20028 { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; @@ -169,7 +169,7 @@ pll6: clk@01c20028 { clock-output-names = "pll6", "pll6x2"; }; -cpu: cpu@01c20054 { +cpu: cpu@1c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; reg = <0x01c20054 0x4>; @@ -177,7 +177,7 @@ cpu: cpu@01c20054 { clock-output-names = "cpu"; }; -mmc0_clk: clk@01c20088 { +mmc0_clk: clk@1c20088 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; @@ -199,7 +199,7 @@ gmac_int_tx_clk: clk@3 { clock-output-names = "gmac_int_tx"; }; -gmac_clk: clk@01c20164 { +gmac_clk: clk@1c20164 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c20164 0x4>; @@ -211,7 +211,7 @@ gmac_clk: clk@01c20164 { clock-output-names = "gmac"; }; -mmc_config_clk: clk@01c13000 { +mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ahb0_gates 8>; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt index 616836e7e1e2..959d96632f5d 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce706.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt @@ -25,7 +25,7 @@ Example: }; }; ... - i2c0: i2c-master@0d090000 { + i2c0: i2c-master@d090000 { ... cdce706: clock-synth@69 { compatible = "ti,cdce706"; diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt index 5d38e9b7033f..f2dc3d9bca92 100644 --- a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt +++ b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt @@ -14,7 +14,7 @@ Optional properties: - reset-names : must contain "ahb" Example: - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt index ed5e0a7894ad..05176f1ae108 100644 --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt @@ -42,7 +42,7 @@ Optional properties: example: -gpu_3d: gpu@00130000 { +gpu_3d: gpu@130000 { compatible = "vivante,gc"; reg = <0x00130000 0x4000>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt index 66a8f86e5d12..6d021e71c9cf 100644 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -32,11 +32,11 @@ Optional properties Example: - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { /* ... */ }; - hdmi: hdmi@0120000 { + hdmi: hdmi@120000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-hdmi"; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt index 8c9e9f515c87..5a9ce511be88 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt @@ -78,7 +78,7 @@ chosen { stdout-path = "display0"; }; -soc@01c00000 { +soc@1c00000 { lcdc0: lcdc@1c0c000 { compatible = "allwinner,sun4i-a10-lcdc"; ... diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 92441086caba..b7faa6f6a326 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -266,7 +266,7 @@ connector { }; }; -hdmi: hdmi@01c16000 { +hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; interrupts = <58>; @@ -305,7 +305,7 @@ hdmi: hdmi@01c16000 { }; }; -tve0: tv-encoder@01c0a000 { +tve0: tv-encoder@1c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; clocks = <&ahb_gates 34>; diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt index 3b484380c56a..8ad556aca70b 100644 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -12,7 +12,7 @@ Required properties: second cell holding the request line number. Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; @@ -32,7 +32,7 @@ The three cells in order are: 3. The port ID as specified in the datasheet Example: - spi2: spi@01c17000 { + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <0 12 4>; diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 98fbe1a5c6dd..717851407fac 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -38,7 +38,7 @@ The two cells in order are: 2. The port ID as specified in the datasheet Example: -spi2: spi@01c6a000 { +spi2: spi@1c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = <0 67 4>; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 41f0c1a07c56..66026dcf53e1 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -142,7 +142,7 @@ mcasp0: mcasp@48038000 { }; 2. -edma1: edma@02728000 { +edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; @@ -165,13 +165,13 @@ edma1: edma@02728000 { power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc0: tptc@027b0000 { +edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc1: tptc@027b8000 { +edma1_tptc1: tptc@27b8000 { compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt index 3207ceb04d0b..abec59f35fde 100644 --- a/Documentation/devicetree/bindings/dma/zxdma.txt +++ b/Documentation/devicetree/bindings/dma/zxdma.txt @@ -26,7 +26,7 @@ Controller: Client: Use specific request line passing from dmax For example, spdif0 tx channel request line is 4 - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { #sound-dai-cells = <0>; compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt index e821e16ad65b..0c10802c8327 100644 --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt @@ -66,7 +66,7 @@ See ".../sram/sram.txt" for the bindings. Example: -hsp_top0: hsp@03c00000 { +hsp_top0: hsp@3c00000 { ... #mbox-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt index 6c7e6c7302f5..0423699d74c7 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt @@ -25,7 +25,7 @@ Please refer to gpio.txt in this directory for details of the common GPIO bindings used by client devices. Example: - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; ti,syscon-dev = <&devctrl 0x240>; gpio-controller; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt index 1fd98ffa8cb7..528f5ef5a893 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt @@ -30,7 +30,7 @@ Optional properties: Example: - pdc_gpios: gpio-controller@02006500 { + pdc_gpios: gpio-controller@2006500 { gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt index 174cdf309170..b05a90e0ab29 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt @@ -59,7 +59,7 @@ Required properties: Example: - gpios: gpio-controller@02005800 { + gpios: gpio-controller@2005800 { #address-cells = <1>; #size-cells = <0>; compatible = "img,tz1090-gpio"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt index 2296d782b4c2..7d53a2b79553 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt @@ -17,7 +17,7 @@ Optional properties : Example : -i2c@02010084000 { +i2c@2010084000 { compatible = "lsi,api2c"; device_type = "i2c"; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt index 6b765485af7d..49df0053347a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt @@ -24,7 +24,7 @@ Slave device properties: Example: - p2wi@01f03400 { + p2wi@1f03400 { compatible = "allwinner,sun6i-a31-p2wi"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt index 77d5aba1bd8c..baecc4a85197 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt @@ -19,7 +19,7 @@ Optional properties: Example: -ak8974@0f { +ak8974@f { compatible = "asahi-kasei,ak8974"; reg = <0x0f>; avdd-supply = <&foo_reg>; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index e1e7dd3259f6..aa67ceb0d4e0 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ak8975@0c { +ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt index 4357e498ef04..1458c3179a63 100644 --- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -19,7 +19,7 @@ Example: #include <dt-bindings/input/input.h> - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt index 49fa14ed155c..298e3442f143 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -10,7 +10,7 @@ Required properties: Example: - egalax_ts@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index e67e58b61706..164915004424 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -21,7 +21,7 @@ Optional properties: each read. Valid values are 1, 4, 8, 16 and 32. Example: - tsc: tsc@02040000 { + tsc: tsc@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt index 4ae553eb333d..4903fb72d883 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt @@ -20,7 +20,7 @@ Required properties: Example: -sc-nmi-intc@01c00030 { +sc-nmi-intc@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt index d9bb106bdd16..5f94d7739d8d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt @@ -20,7 +20,7 @@ Please refer to interrupts.txt in this directory for details of the common Interrupt Controllers bindings used by client devices. Example: - kirq0: keystone_irq0@026202a0 { + kirq0: keystone_irq0@26202a0 { compatible = "ti,keystone-irq"; ti,syscon-dev = <&devctrl 0x2a0>; interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt index b2641ceb2b40..059139abce35 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt @@ -115,7 +115,7 @@ to non-secure vs secure interrupt line. iommus = <&apps_iommu 4>; }; - gpu@01c00000 { + gpu@1c00000 { ... iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; }; diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt index 59b56365f648..cf1ea403ba7a 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.txt +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt @@ -32,7 +32,7 @@ syscon: syscon@10000000 { compatible = "arm,realview-pb1176-syscon", "syscon"; reg = <0x10000000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; @@ -40,7 +40,7 @@ syscon: syscon@10000000 { linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8.1 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x02>; @@ -48,7 +48,7 @@ syscon: syscon@10000000 { linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8.2 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x04>; @@ -56,35 +56,35 @@ syscon: syscon@10000000 { linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8.3 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8.4 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8.5 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8.6 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8.7 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x80>; diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt index b449d025049f..c3b55b3ede8a 100644 --- a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt +++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt @@ -29,7 +29,7 @@ Required properties: Example(K2G): ------------ - msgmgr: msgmgr@02a00000 { + msgmgr: msgmgr@2a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; reg-names = "queue_proxy_region", "queue_state_debug_region"; diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt index ea2b16ced49b..7f722316458a 100644 --- a/Documentation/devicetree/bindings/marvell.txt +++ b/Documentation/devicetree/bindings/marvell.txt @@ -446,7 +446,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery CPU Error node: - cpu-error@0070 { + cpu-error@70 { compatible = "marvell,mv64360-cpu-error"; reg = <0x70 0x10 0x128 0x28>; interrupts = <3>; @@ -466,7 +466,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery SRAM Controller node: - sram-ctrl@0380 { + sram-ctrl@380 { compatible = "marvell,mv64360-sram-ctrl"; reg = <0x380 0x80>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt index 5218921629ed..49f8bcc2ea4d 100644 --- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt +++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt @@ -27,7 +27,7 @@ Documentation/devicetree/bindings/media/video-interfaces.txt. Example: - tc358743@0f { + tc358743@f { compatible = "toshiba,tc358743"; reg = <0x0f>; clocks = <&hdmi_osc>; diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt b/Documentation/devicetree/bindings/media/img-ir-rev1.txt index 5434ce61b925..ed9ec52b77e0 100644 --- a/Documentation/devicetree/bindings/media/img-ir-rev1.txt +++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt @@ -25,7 +25,7 @@ Optional properties: Example: - ir@02006200 { + ir@2006200 { compatible = "img,ir-rev1"; reg = <0x02006200 0x100>; interrupts = <29 4>; diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt index 8be2a040c6c6..ece0832fdeaf 100644 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ b/Documentation/devicetree/bindings/media/stih-cec.txt @@ -13,7 +13,7 @@ Required properties: Example for STIH407: -sti-cec@094a087c { +sti-cec@94a087c { compatible = "st,stih-cec"; reg = <0x94a087c 0x64>; clocks = <&clk_sysin>; diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index 6af3fc210ecc..c7888d6f6408 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -50,7 +50,7 @@ Example: /* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */ - c8sectpfe@08a20000 { + c8sectpfe@8a20000 { compatible = "st,stih407-c8sectpfe"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "stfe", "stfe-ram"; diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt index 302a0b183cb8..91648c569b1e 100644 --- a/Documentation/devicetree/bindings/media/sunxi-ir.txt +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt @@ -14,7 +14,7 @@ Optional properties: Example: -ir0: ir@01c21800 { +ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; clock-names = "apb", "ir"; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 741e76688cf2..0f2587fa42cb 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -19,7 +19,7 @@ Required properties: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt index 51fc1a60caa5..f2f3fe75901c 100644 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ b/Documentation/devicetree/bindings/mfd/max77802.txt @@ -18,7 +18,7 @@ Required properties: Example: - max77802: pmic@09 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&intc>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index bcb6abb9d413..336c0495c8a3 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -41,7 +41,7 @@ foo@1000 { compatible = "syscon", "simple-mfd"; reg = <0x01000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt index badff3611a98..86dd8191b04c 100644 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt @@ -10,7 +10,7 @@ Required properties: - #io-channel-cells: shall be 0, Example: - ths: ths@01c25000 { + ths: ths@1c25000 { compatible = "allwinner,sun8i-a33-ths"; reg = <0x01c25000 0x100>; #thermal-sensor-cells = <0>; @@ -47,7 +47,7 @@ Optional properties: Example: - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 03c5a551da55..dd2c06540485 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions: Example: - prcm: prcm@01f01400 { + prcm: prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt index 408f768686f1..8b92d4576c42 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -18,7 +18,7 @@ Optional property: performed on the device. Examples: -gpr: iomuxc-gpr@020e0000 { +gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index b32ade645ad9..5934157cf2cd 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -143,7 +143,7 @@ sdhci@ab000000 { Example with sdio function subnode: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index e35645598315..6b3d40ca395e 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -74,7 +74,7 @@ mmc0: sdhci@fe81e000 { /* Example SD stih407 family configuration */ -mmc1: sdhci@09080000 { +mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; @@ -90,7 +90,7 @@ mmc1: sdhci@09080000 { /* Example eMMC stih407 family configuration */ -mmc0: sdhci@09060000 { +mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 63b57e2a10fb..132e0007d7d6 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -29,7 +29,7 @@ Optional properties: Examples: - Within .dtsi: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; @@ -39,7 +39,7 @@ Examples: }; - Within dts: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { pinctrl-names = "default", "default"; pinctrl-0 = <&mmc0_pins_a>; pinctrl-1 = <&mmc0_cd_pin_reference_design>; diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index a37c67bcb43b..5e13a5cdff03 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -31,7 +31,7 @@ see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. Examples: -nfc: nand@01c03000 { +nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <0 37 1>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt index 10640b17c866..e98118aef5f6 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt @@ -10,7 +10,7 @@ Required properties: Example: -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt index 4ec56413779d..ab5b8613b0ef 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt @@ -9,7 +9,7 @@ Optional properties: - phy-supply: phandle to a regulator if the PHY needs one Example at the SoC level: -mdio@01c0b080 { +mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; #address-cells = <1>; @@ -18,7 +18,7 @@ mdio@01c0b080 { And at the board level: -mdio@01c0b080 { +mdio@1c0b080 { phy-supply = <®_emac_3v3>; phy0: ethernet-phy@0 { diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt index ea4d752389a2..8b3f953656e3 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt @@ -15,7 +15,7 @@ Optional properties: Examples: - gmac: ethernet@01c50000 { + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>, <0x01c20164 0x4>; diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt index 26c77d985faf..3956af1d30f3 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt @@ -109,7 +109,7 @@ ethernet@f0ba0000 { reg = <0xf0ba0000 0xfc4c>; interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; - mdio@0e14 { + mdio@e14 { compatible = "brcm,genet-mdio-v4"; #address-cells = <0x1>; #size-cells = <0x0>; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 78138333ff7a..63e90421d029 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -45,7 +45,7 @@ Required properties: Example: SoC dtsi: -m_can1: can@020e8000 { +m_can1: can@20e8000 { compatible = "bosch,m_can"; reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; reg-names = "m_can", "message_ram"; diff --git a/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/Documentation/devicetree/bindings/net/can/sun4i_can.txt index 84ed1909df76..f69845e6feaf 100644 --- a/Documentation/devicetree/bindings/net/can/sun4i_can.txt +++ b/Documentation/devicetree/bindings/net/can/sun4i_can.txt @@ -19,7 +19,7 @@ SoC common .dtsi file: allwinner,pull = <0>; }; ... - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = <0 26 4>; @@ -29,7 +29,7 @@ SoC common .dtsi file: Board specific .dts file: - can0: can@01c2bc00 { + can0: can@1c2bc00 { pinctrl-names = "default"; pinctrl-0 = <&can0_pins_a>; status = "okay"; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index b2bd4704f859..86602f264dce 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -20,7 +20,7 @@ Optional properties: Example: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index ef06d061913c..081c49c0dac0 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -13,13 +13,13 @@ Are child nodes of qfprom, bindings of which as described in bindings/nvmem/nvmem.txt Example for sun4i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10> }; Example for sun7i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200> }; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt index 6462e12d8de6..0415265c215a 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt @@ -10,7 +10,7 @@ Required Properties: Example: -otp: otp@0301c800 { +otp: otp@301c800 { compatible = "brcm,ocotp"; reg = <0x0301c800 0x2c>; brcm,ocotp-size = <2048>; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 70d791b03ea1..f162c72b4e36 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt index b52bc11e9597..fd06c09b822b 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.txt +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -33,7 +33,7 @@ bits: Is pair of bit location and number of bits, which specifies offset For example: /* Provider */ - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { ... /* Data cells */ diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt index 4ad68b7f5c18..26fe878d5c86 100644 --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -12,7 +12,7 @@ bindings/nvmem/nvmem.txt Example: - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { compatible = "qcom,qfprom"; reg = <0x00700000 0x8000>; ... diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 982a74ea6df9..1b4d2803dad1 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -255,7 +255,7 @@ Tegra30: SoC DTSI: - pcie-controller@00003000 { + pcie-controller@3000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -334,7 +334,7 @@ SoC DTSI: Board DTS: - pcie-controller@00003000 { + pcie-controller@3000 { status = "okay"; avdd-pexa-supply = <&ldo1_reg>; @@ -360,7 +360,7 @@ Tegra124: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -425,7 +425,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; @@ -456,7 +456,7 @@ Tegra210: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -521,7 +521,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avdd-pll-uerefe-supply = <&avdd_1v05_pll>; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt index 761c4bc24a9b..10efff28b52b 100644 --- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -15,7 +15,7 @@ Required properties For the child node: - #phy-cells: must be 0 Example: - pcie_phy: phy@0301d0a0 { + pcie_phy: phy@301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 1d25b04cd05e..6ac98b3b5f57 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -23,7 +23,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@020c9000 { +usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index f9853156e311..64f7109aea1f 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -25,7 +25,7 @@ It is recommended to list all clocks and resets available. The driver will only use those matching the phy_type. Example: - usbphy1: phy@00a01800 { + usbphy1: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 6f2ec9af0de2..09789fdfa749 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -89,7 +89,7 @@ Optional subnode-properties: Examples: -pio: pinctrl@01c20800 { +pio: pinctrl@1c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index 42d74f8a1bcc..a1050b5982ec 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -58,14 +58,14 @@ Some requirements for using fsl,imx-pinctrl binding: configurations by referring to the phandle of that pin configuration node. Examples: -usdhc@0219c000 { /* uSDHC4 */ +usdhc@219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_1>; }; -iomuxc@020e0000 { +iomuxc@20e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt index 51b943cc9770..cf9ccdff4455 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -89,7 +89,7 @@ Valid values for pin and group names are: Example: - pinctrl_pdc: pinctrl@02006500 { + pinctrl_pdc: pinctrl@2006500 { #gpio-range-cells = <3>; compatible = "img,tz1090-pdc-pinctrl"; reg = <0x02006500 0x100>; @@ -121,7 +121,7 @@ Example board file extracts: }; }; - ir: ir@02006200 { + ir: ir@2006200 { pinctrl-names = "default"; pinctrl-0 = <&irmod_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 509faa87ad0e..2dfd9a3fc1e4 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -197,7 +197,7 @@ Valid values for pin and group names are: Example: - pinctrl: pinctrl@02005800 { + pinctrl: pinctrl@2005800 { #gpio-range-cells = <3>; compatible = "img,tz1090-pinctrl"; reg = <0x02005800 0xe4>; @@ -221,7 +221,7 @@ Example board file extract: }; }; - uart@02004b00 { + uart@2004b00 { pinctrl-names = "default"; pinctrl-0 = <&uart0_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 4048f43a9d29..02e971c39d81 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -97,7 +97,7 @@ SoC file extract: Board file extract: ------------------- - pcie-controller@01003000 { + pcie-controller@1003000 { ... phys = <&padctl 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 37d744750579..231fa1db7c5e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -86,7 +86,7 @@ Examples: reg = <0 0x1020C020 0 0x1000>; }; - pinctrl@01c20800 { + pinctrl@1c20800 { compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt index 013c675b5b64..48b9be48af18 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt @@ -89,7 +89,7 @@ Example: interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt index e312a71b2f94..aaf01e929eea 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -175,7 +175,7 @@ to specify in a pin configuration subnode: Example: - tlmm: pinctrl@01010000 { + tlmm: pinctrl@1010000 { compatible = "qcom,msm8996-pinctrl"; reg = <0x01010000 0x300000>; interrupts = <0 208 0>; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index 6c1498958d48..e371b262d709 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -40,7 +40,7 @@ Optional properties: Example: - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, @@ -80,7 +80,7 @@ that is a phandle pointing to the power domain the device belongs to. Example of a device that is part of the PU power domain: - vpu: vpu@02040000 { + vpu: vpu@2040000 { reg = <0x02040000 0x3c000>; /* ... */ power-domains = <&pd_pu>; diff --git a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt index dc7c9bad63ea..1b81fcd9fb72 100644 --- a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt @@ -10,7 +10,7 @@ Required Properties: -reg: Specifies the physical address of the SNVS_LPCR register Example: - snvs@020cc000 { + snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt index c82f12e2d85c..c5c03789ed1e 100644 --- a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt @@ -37,12 +37,12 @@ Example 1: Setup keystone reset so that in case software reset or WDT0 is triggered it issues hard reset for SoC. -pllctrl: pll-controller@02310000 { +pllctrl: pll-controller@2310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; -devctrl: device-state-control@02620000 { +devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt index 0f766333b6eb..37f91fa57654 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt @@ -8,7 +8,7 @@ Required properties: Example: -mcu@0a { +mcu@a { #gpio-cells = <2>; compatible = "fsl,mc9s08qg8-mpc8349emitx", "fsl,mcu-mpc8349emitx"; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index c5171660eaf9..51ff54c8b8ef 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -14,7 +14,7 @@ Required properties: Example: - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt index 0dded64d89d3..e9f7578ca09a 100644 --- a/Documentation/devicetree/bindings/regulator/max77686.txt +++ b/Documentation/devicetree/bindings/regulator/max77686.txt @@ -40,7 +40,7 @@ to get matched with their hardware counterparts as follow: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 879e98d3b9aa..b82943d83677 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -71,7 +71,7 @@ has not been disabled for that state using "regulator-off-in-suspend". Example: - max77802@09 { + max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt index c8f775714887..4ca66c96fe97 100644 --- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt +++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt @@ -14,7 +14,7 @@ Required properties: example: -ahb1_rst: reset@01c202c0 { +ahb1_rst: reset@1c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-ahb1-reset"; reg = <0x01c202c0 0xc>; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt index 13301777e11c..6ed79e60248a 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt @@ -14,7 +14,7 @@ Required properties: example: -src: src@020d8000 { +src: src@20d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; @@ -33,10 +33,10 @@ reset.txt example: - ipu1: ipu@02400000 { + ipu1: ipu@2400000 { resets = <&src 2>; }; - ipu2: ipu@02800000 { + ipu2: ipu@2800000 { resets = <&src 4>; }; diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt index c516d24959f2..86945502ccb5 100644 --- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -67,7 +67,7 @@ using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 / { soc { - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { compatible = "syscon", "simple-mfd"; reg = <0x02350000 0x1000>; diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt index d5e26d313f62..12c083c1140a 100644 --- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt @@ -17,7 +17,7 @@ Required properties for new device trees Example: -rtc: rtc@01f00000 { +rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <0 40 4>, <0 41 4>; diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt index 6983aad376c3..4a8d79c1cf08 100644 --- a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt @@ -10,7 +10,7 @@ Required properties: Example: -rtc: rtc@01c20d00 { +rtc: rtc@1c20d00 { compatible = "allwinner,sun4i-a10-rtc"; reg = <0x01c20d00 0x20>; interrupts = <24>; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt index 60984260207b..09b1b05fa677 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt @@ -18,7 +18,7 @@ par_io@1400 { #size-cells = <0>; device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { + ucc_pin@1 { ...... }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt index ec6ee2e864a2..5bde8b98a8c9 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt @@ -26,7 +26,7 @@ Required properties: interrupts. Example: - ucc_pin@01 { + ucc_pin@1 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 3 1 0 1 0 /* TxD0 */ diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt index 66e6265fb0aa..f7b00a7c0f68 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt @@ -51,7 +51,7 @@ of valid identifiers for k2g. Example (K2G): -------------------- - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ns16550a"; ... power-domains = <&k2g_pds 0x002c>; diff --git a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt index befd125d18bb..860fc0da39c0 100644 --- a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt +++ b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt @@ -9,7 +9,7 @@ Required properties: Examples: - i2s0: xtfpga-i2s@0d080000 { + i2s0: xtfpga-i2s@d080000 { #sound-dai-cells = <0>; compatible = "cdns,xtfpga-i2s"; reg = <0x0d080000 0x40>; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 65979b205893..f5a14115b459 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -41,7 +41,7 @@ Required properties: Example: -asrc: asrc@02034000 { +asrc: asrc@2034000 { compatible = "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 21c401e2ccda..cacd18bb9ba6 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -48,7 +48,7 @@ Required properties: Example: -esai: esai@02024000 { +esai: esai@2024000 { compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 0f97e54c3d43..38cfa7573441 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -39,7 +39,7 @@ Required properties: Example: -spdif: spdif@02004000 { +spdif: spdif@2004000 { compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt index b30a737e209e..2db4dcbee1b9 100644 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt @@ -22,7 +22,7 @@ Required properties of optional child nodes: Example: -audmux@021d8000 { +audmux@21d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; }; diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 09e0e18591ae..bf100cd0d0f7 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -63,7 +63,7 @@ Optional SoC Specific Properties: Example: -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt index 2d4e10deb6f4..66579bbd3294 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -62,7 +62,7 @@ Required properties for the following compatibles: block in the PRCM. Example: -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun7i-a20-codec"; reg = <0x01c22c00 0x40>; @@ -73,7 +73,7 @@ codec: codec@01c22c00 { dma-names = "rx", "tx"; }; -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-codec"; reg = <0x01c22c00 0x98>; diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index fc5da6080759..05d7135a8d2f 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -28,7 +28,7 @@ Required properties for the following compatibles: Example: -i2s0: i2s@01c22400 { +i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt index 399b1b4bae22..2ca3d138528e 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt @@ -48,7 +48,7 @@ are similar to A33 using simple-card: sound-dai = <&codec>; }; - soc@01c00000 { + soc@1c00000 { [...] audio-codec@1c22e00 { diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt index 1b6e7c4e50ab..07356758bd91 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt @@ -10,7 +10,7 @@ Required properties if not a sub-node of the PRCM node: - reg: must contain the registers location and length Example: -prcm: prcm@01f01400 { +prcm: prcm@1f01400 { codec_analog: codec-analog { compatible = "allwinner,sun8i-a23-codec-analog"; }; diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 70ee177901d3..0c64a209c2e9 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -31,7 +31,7 @@ Required properties: Example: -spdif: spdif@01c21000 { +spdif: spdif@1c21000 { compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x40>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt index b5a5ca4502f9..09231d7586b2 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -16,7 +16,7 @@ please check: * dma/dma.txt Example: - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt index 484bbff5337e..c75d604a8290 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt @@ -12,7 +12,7 @@ Required properties: Example: -spi1: spi@01c06000 { +spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index ab1811354cce..435a8e0731ac 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -19,7 +19,7 @@ Optional properties: Example: -spi1: spi@01c69000 { +spi1: spi@1c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = <0 66 4>; @@ -28,7 +28,7 @@ spi1: spi@01c69000 { resets = <&ahb1_rst 21>; }; -spi0: spi@01c68000 { +spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sram/samsung-sram.txt b/Documentation/devicetree/bindings/sram/samsung-sram.txt index 6bc474b2b885..61a9bbed303d 100644 --- a/Documentation/devicetree/bindings/sram/samsung-sram.txt +++ b/Documentation/devicetree/bindings/sram/samsung-sram.txt @@ -19,7 +19,7 @@ found in Documentation/devicetree/bindings/sram/sram.txt Example: - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 6bb92a1df753..d087f04a4d7f 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -47,7 +47,7 @@ This valid values for this argument are: Example ------- -sram-controller@01c00000 { +sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; @@ -68,7 +68,7 @@ sram-controller@01c00000 { }; }; -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; ... diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt index 8d6e4fd2468e..2c5c1be78360 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -14,7 +14,7 @@ Optional properties: Example: -timer@01c60000 { +timer@1c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <0 51 1>, diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index cb2bd83fa89a..50abb20fe319 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -16,7 +16,7 @@ Required properties: Example: - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; clocks = <&ahb_gates 0>; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 16920d78e1b8..7a33f22c815a 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -181,7 +181,7 @@ usb: usb@47400000 { "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@7402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index ad8ea56a9ed3..44e80153b148 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -18,7 +18,7 @@ Required properties: - atmel,oc-gpio: If present, specifies a gpio that needs to be activated for the overcurrent detection. -usb0: ohci@00500000 { +usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; @@ -39,7 +39,7 @@ Required properties: "ehci_clk" for the peripheral clock "usb_clk" for the UTMI clock -usb1: ehci@00800000 { +usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 4>; diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt index 2dc8f67eda39..24a826d5015e 100644 --- a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ohci: usb@0225000 { +ohci: usb@225000 { compatible = "ti,da830-ohci"; reg = <0x225000 0x1000>; interrupts = <59>; diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index a12d6012a40f..3efde12b5d68 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -30,7 +30,7 @@ Example (Sequoia 440EPx): }; Example (Allwinner sun4i A10 SoC): - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index e8766b08c93b..09e70c875bc6 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index c1a0a9191d26..057dd384d473 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -26,7 +26,7 @@ Optional properties: clock frequencies table is used) Examples: - usb3503@08 { + usb3503@8 { compatible = "smsc,usb3503"; reg = <0x08>; connect-gpios = <&gpx3 0 1>; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index f1e27faf528e..a85a631ec434 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -10,7 +10,7 @@ Required properties: - reg: Should contain registers location and length Examples: -usbmisc@02184800 { +usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 235de0683bb6..5b38a30e608c 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -13,7 +13,7 @@ Required properties: Example: -wdt: watchdog@010000000 { +wdt: watchdog@10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x18>; }; diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index b8f75c51453a..62dd5baad70e 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -8,7 +8,7 @@ Required properties: Example: -wdt: watchdog@01c20c90 { +wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; |