summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/zl6100125
-rw-r--r--drivers/hwmon/pmbus/Kconfig11
-rw-r--r--drivers/hwmon/pmbus/Makefile1
-rw-r--r--drivers/hwmon/pmbus/zl6100.c256
4 files changed, 393 insertions, 0 deletions
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
new file mode 100644
index 000000000000..7617798b5c97
--- /dev/null
+++ b/Documentation/hwmon/zl6100
@@ -0,0 +1,125 @@
+Kernel driver zl6100
+====================
+
+Supported chips:
+ * Intersil / Zilker Labs ZL2004
+ Prefix: 'zl2004'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn6847.pdf
+ * Intersil / Zilker Labs ZL2006
+ Prefix: 'zl2006'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn6850.pdf
+ * Intersil / Zilker Labs ZL2008
+ Prefix: 'zl2008'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn6859.pdf
+ * Intersil / Zilker Labs ZL2105
+ Prefix: 'zl2105'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn6851.pdf
+ * Intersil / Zilker Labs ZL2106
+ Prefix: 'zl2106'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn6852.pdf
+ * Intersil / Zilker Labs ZL6100
+ Prefix: 'zl6100'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn6876.pdf
+ * Intersil / Zilker Labs ZL6105
+ Prefix: 'zl6105'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Intersil / Zilker Labs ZL6100 and
+compatible digital DC-DC controllers.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+WARNING: Do not access chip registers using the i2cdump command, and do not use
+any of the i2ctools commands on a command register used to save and restore
+configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
+this driver interpret any access to those command registers (including read
+commands) as request to execute the command in question. Unless write accesses
+to those registers are protected, this may result in power loss, board resets,
+and/or Flash corruption. Worst case, your board may turn into a brick.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Module parameters
+-----------------
+
+delay
+-----
+
+Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
+I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
+1 ms appears to be sufficient and has not caused any problems in testing.
+The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
+affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
+except for ZL2004 and ZL6105. To enable manual override, the driver provides a
+writeable module parameter, 'delay', which can be used to set the interval to
+a value between 0 and 65,535 microseconds.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label "vin"
+in1_input Measured input voltage.
+in1_min Minimum input voltage.
+in1_max Maximum input voltage.
+in1_lcrit Critical minumum input voltage.
+in1_crit Critical maximum input voltage.
+in1_min_alarm Input voltage low alarm.
+in1_max_alarm Input voltage high alarm.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_crit_alarm Input voltage critical high alarm.
+
+in2_label "vout1"
+in2_input Measured output voltage.
+in2_lcrit Critical minumum output Voltage.
+in2_crit Critical maximum output voltage.
+in2_lcrit_alarm Critical output voltage critical low alarm.
+in2_crit_alarm Critical output voltage critical high alarm.
+
+curr1_label "iout1"
+curr1_input Measured output current.
+curr1_lcrit Critical minimum output current.
+curr1_crit Critical maximum output current.
+curr1_lcrit_alarm Output current critical low alarm.
+curr1_crit_alarm Output current critical high alarm.
+
+temp[12]_input Measured temperature.
+temp[12]_min Minimum temperature.
+temp[12]_max Maximum temperature.
+temp[12]_lcrit Critical low temperature.
+temp[12]_crit Critical high temperature.
+temp[12]_min_alarm Chip temperature low alarm.
+temp[12]_max_alarm Chip temperature high alarm.
+temp[12]_lcrit_alarm Chip temperature critical low alarm.
+temp[12]_crit_alarm Chip temperature critical high alarm.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 37575582e51a..efaf340651a0 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -98,4 +98,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_ZL6100
+ tristate "Intersil ZL6100 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Intersil
+ ZL2004, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, and ZL6105 Digital
+ DC/DC Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called zl6100.
+
endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 623eedb1ed9a..b9e4fb421f6c 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
new file mode 100644
index 000000000000..2bc980006f83
--- /dev/null
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -0,0 +1,256 @@
+/*
+ * Hardware monitoring driver for ZL6100 and compatibles
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include "pmbus.h"
+
+enum chips { zl2004, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 };
+
+struct zl6100_data {
+ int id;
+ ktime_t access; /* chip access time */
+ struct pmbus_driver_info info;
+};
+
+#define to_zl6100_data(x) container_of(x, struct zl6100_data, info)
+
+#define ZL6100_DEVICE_ID 0xe4
+
+#define ZL6100_WAIT_TIME 1000 /* uS */
+
+static ushort delay = ZL6100_WAIT_TIME;
+module_param(delay, ushort, 0644);
+MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
+
+/* Some chips need a delay between accesses */
+static inline void zl6100_wait(const struct zl6100_data *data)
+{
+ if (delay) {
+ s64 delta = ktime_us_delta(ktime_get(), data->access);
+ if (delta < delay)
+ udelay(delay - delta);
+ }
+}
+
+static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page || reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_read_word_data(client, page, reg);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_read_byte_data(client, page, reg);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page || reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_write_word_data(client, page, reg, word);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_write_byte(client, page, value);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static const struct i2c_device_id zl6100_id[] = {
+ {"zl2004", zl2004},
+ {"zl2006", zl2006},
+ {"zl2008", zl2008},
+ {"zl2105", zl2105},
+ {"zl2106", zl2106},
+ {"zl6100", zl6100},
+ {"zl6105", zl6105},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, zl6100_id);
+
+static int zl6100_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct zl6100_data *data;
+ struct pmbus_driver_info *info;
+ u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+ const struct i2c_device_id *mid;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, ZL6100_DEVICE_ID,
+ device_id);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ device_id[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", device_id);
+
+ mid = NULL;
+ for (mid = zl6100_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+ if (id->driver_data != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ data = kzalloc(sizeof(struct zl6100_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->id = mid->driver_data;
+
+ /*
+ * ZL2008, ZL2105, and ZL6100 are known to require a wait time
+ * between I2C accesses. ZL2004 and ZL6105 are known to be safe.
+ *
+ * Only clear the wait time for chips known to be safe. The wait time
+ * can be cleared later for additional chips if tests show that it
+ * is not needed (in other words, better be safe than sorry).
+ */
+ if (data->id == zl2004 || data->id == zl6105)
+ delay = 0;
+
+ /*
+ * Since there was a direct I2C device access above, wait before
+ * accessing the chip again.
+ * Set the timestamp, wait, then set it again. This should provide
+ * enough buffer time to be safe.
+ */
+ data->access = ktime_get();
+ zl6100_wait(data);
+ data->access = ktime_get();
+
+ info = &data->info;
+
+ info->pages = 1;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+ info->read_word_data = zl6100_read_word_data;
+ info->read_byte_data = zl6100_read_byte_data;
+ info->write_word_data = zl6100_write_word_data;
+ info->write_byte = zl6100_write_byte;
+
+ ret = pmbus_do_probe(client, mid, info);
+ if (ret)
+ goto err_mem;
+ return 0;
+
+err_mem:
+ kfree(data);
+ return ret;
+}
+
+static int zl6100_remove(struct i2c_client *client)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct zl6100_data *data = to_zl6100_data(info);
+
+ pmbus_do_remove(client);
+ kfree(data);
+ return 0;
+}
+
+static struct i2c_driver zl6100_driver = {
+ .driver = {
+ .name = "zl6100",
+ },
+ .probe = zl6100_probe,
+ .remove = zl6100_remove,
+ .id_table = zl6100_id,
+};
+
+static int __init zl6100_init(void)
+{
+ return i2c_add_driver(&zl6100_driver);
+}
+
+static void __exit zl6100_exit(void)
+{
+ i2c_del_driver(&zl6100_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
+MODULE_LICENSE("GPL");
+module_init(zl6100_init);
+module_exit(zl6100_exit);