summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/coccinelle.txt50
-rw-r--r--Documentation/kbuild/modules.txt733
-rw-r--r--MAINTAINERS2
-rw-r--r--scripts/basic/docproc.c5
-rwxr-xr-xscripts/coccicheck46
-rw-r--r--scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci (renamed from scripts/coccinelle/alloc/drop_kmalloc_cast.cocci)0
-rw-r--r--scripts/coccinelle/api/alloc/kzalloc-simple.cocci (renamed from scripts/coccinelle/alloc/kzalloc-simple.cocci)6
-rw-r--r--scripts/coccinelle/api/err_cast.cocci (renamed from scripts/coccinelle/err_cast.cocci)0
-rw-r--r--scripts/coccinelle/api/kstrdup.cocci39
-rw-r--r--scripts/coccinelle/api/memdup.cocci40
-rw-r--r--scripts/coccinelle/api/memdup_user.cocci35
-rw-r--r--scripts/coccinelle/api/resource_size.cocci (renamed from scripts/coccinelle/resource_size.cocci)0
-rw-r--r--scripts/coccinelle/free/kfree.cocci117
-rw-r--r--scripts/coccinelle/iterators/fen.cocci64
-rw-r--r--scripts/coccinelle/iterators/itnull.cocci58
-rw-r--r--scripts/coccinelle/iterators/list_entry_update.cocci62
-rw-r--r--scripts/coccinelle/locks/call_kern.cocci74
-rw-r--r--scripts/coccinelle/locks/double_lock.cocci92
-rw-r--r--scripts/coccinelle/locks/flags.cocci80
-rw-r--r--scripts/coccinelle/locks/mini_lock.cocci95
-rw-r--r--scripts/coccinelle/misc/doubleinit.cocci53
-rw-r--r--scripts/coccinelle/misc/ifcol.cocci48
-rw-r--r--scripts/coccinelle/null/deref_null.cocci (renamed from scripts/coccinelle/deref_null.cocci)0
-rw-r--r--scripts/coccinelle/null/eno.cocci20
-rw-r--r--scripts/coccinelle/null/kmerr.cocci72
-rw-r--r--scripts/coccinelle/tests/doublebitand.cocci54
-rw-r--r--scripts/coccinelle/tests/doubletest.cocci40
-rwxr-xr-xscripts/extract-ikconfig41
-rwxr-xr-xscripts/namespace.pl147
29 files changed, 1597 insertions, 476 deletions
diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt
index cd2b02837066..4a276ea7001c 100644
--- a/Documentation/coccinelle.txt
+++ b/Documentation/coccinelle.txt
@@ -24,6 +24,9 @@ of many distributions, e.g. :
You can get the latest version released from the Coccinelle homepage at
http://coccinelle.lip6.fr/
+Information and tips about Coccinelle are also provided on the wiki
+pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
+
Once you have it, run the following command:
./configure
@@ -41,20 +44,22 @@ A Coccinelle-specific target is defined in the top level
Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
front-end in the 'scripts' directory.
-Four modes are defined: report, patch, context, and org. The mode to
+Four modes are defined: patch, report, context, and org. The mode to
use is specified by setting the MODE variable with 'MODE=<mode>'.
+'patch' proposes a fix, when possible.
+
'report' generates a list in the following format:
file:line:column-column: message
-'patch' proposes a fix, when possible.
-
'context' highlights lines of interest and their context in a
diff-like style.Lines of interest are indicated with '-'.
'org' generates a report in the Org mode format of Emacs.
-Note that not all semantic patches implement all modes.
+Note that not all semantic patches implement all modes. For easy use
+of Coccinelle, the default mode is "chain" which tries the previous
+modes in the order above until one succeeds.
To make a report for every semantic patch, run the following command:
@@ -68,9 +73,9 @@ To produce patches, run:
The coccicheck target applies every semantic patch available in the
-subdirectories of 'scripts/coccinelle' to the entire Linux kernel.
+sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
-For each semantic patch, a changelog message is proposed. It gives a
+For each semantic patch, a commit message is proposed. It gives a
description of the problem being checked by the semantic patch, and
includes a reference to Coccinelle.
@@ -93,12 +98,35 @@ or
make coccicheck COCCI=<my_SP.cocci> MODE=report
+ Using Coccinelle on (modified) files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To apply Coccinelle on a file basis, instead of a directory basis, the
+following command may be used:
+
+ make C=1 CHECK="scripts/coccicheck"
+
+To check only newly edited code, use the value 2 for the C flag, i.e.
+
+ make C=2 CHECK="scripts/coccicheck"
+
+This runs every semantic patch in scripts/coccinelle by default. The
+COCCI variable may additionally be used to only apply a single
+semantic patch as shown in the previous section.
+
+The "chain" mode is the default. You can select another one with the
+MODE variable explained above.
+
+In this mode, there is no information about semantic patches
+displayed, and no commit message proposed.
+
+
Proposing new semantic patches
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
New semantic patches can be proposed and submitted by kernel
developers. For sake of clarity, they should be organized in the
-subdirectories of 'scripts/coccinelle/'.
+sub-directories of 'scripts/coccinelle/'.
Detailed description of the 'report' mode
@@ -111,7 +139,7 @@ Example:
Running
- make coccicheck MODE=report COCCI=scripts/coccinelle/err_cast.cocci
+ make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
@@ -149,7 +177,7 @@ identified.
Example:
Running
- make coccicheck MODE=patch COCCI=scripts/coccinelle/err_cast.cocci
+ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
@@ -193,7 +221,7 @@ NOTE: The diff-like output generated is NOT an applicable patch. The
Example:
Running
- make coccicheck MODE=context COCCI=scripts/coccinelle/err_cast.cocci
+ make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
@@ -228,7 +256,7 @@ diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
Example:
Running
- make coccicheck MODE=org COCCI=scripts/coccinelle/err_cast.cocci
+ make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index 0767cf69c69e..3fb39e0116b4 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -1,215 +1,185 @@
+Building External Modules
-In this document you will find information about:
-- how to build external modules
-- how to make your module use the kbuild infrastructure
-- how kbuild will install a kernel
-- how to install modules in a non-standard location
+This document describes how to build an out-of-tree kernel module.
=== Table of Contents
=== 1 Introduction
- === 2 How to build external modules
- --- 2.1 Building external modules
- --- 2.2 Available targets
- --- 2.3 Available options
- --- 2.4 Preparing the kernel tree for module build
- --- 2.5 Building separate files for a module
- === 3. Example commands
- === 4. Creating a kbuild file for an external module
- === 5. Include files
- --- 5.1 How to include files from the kernel include dir
- --- 5.2 External modules using an include/ dir
- --- 5.3 External modules using several directories
- === 6. Module installation
- --- 6.1 INSTALL_MOD_PATH
- --- 6.2 INSTALL_MOD_DIR
- === 7. Module versioning & Module.symvers
- --- 7.1 Symbols from the kernel (vmlinux + modules)
- --- 7.2 Symbols and external modules
- --- 7.3 Symbols from another external module
- === 8. Tips & Tricks
- --- 8.1 Testing for CONFIG_FOO_BAR
+ === 2 How to Build External Modules
+ --- 2.1 Command Syntax
+ --- 2.2 Options
+ --- 2.3 Targets
+ --- 2.4 Building Separate Files
+ === 3. Creating a Kbuild File for an External Module
+ --- 3.1 Shared Makefile
+ --- 3.2 Separate Kbuild file and Makefile
+ --- 3.3 Binary Blobs
+ --- 3.4 Building Multiple Modules
+ === 4. Include Files
+ --- 4.1 Kernel Includes
+ --- 4.2 Single Subdirectory
+ --- 4.3 Several Subdirectories
+ === 5. Module Installation
+ --- 5.1 INSTALL_MOD_PATH
+ --- 5.2 INSTALL_MOD_DIR
+ === 6. Module Versioning
+ --- 6.1 Symbols From the Kernel (vmlinux + modules)
+ --- 6.2 Symbols and External Modules
+ --- 6.3 Symbols From Another External Module
+ === 7. Tips & Tricks
+ --- 7.1 Testing for CONFIG_FOO_BAR
=== 1. Introduction
-kbuild includes functionality for building modules both
-within the kernel source tree and outside the kernel source tree.
-The latter is usually referred to as external or "out-of-tree"
-modules and is used both during development and for modules that
-are not planned to be included in the kernel tree.
+"kbuild" is the build system used by the Linux kernel. Modules must use
+kbuild to stay compatible with changes in the build infrastructure and
+to pick up the right flags to "gcc." Functionality for building modules
+both in-tree and out-of-tree is provided. The method for building
+either is similar, and all modules are initially developed and built
+out-of-tree.
-What is covered within this file is mainly information to authors
-of modules. The author of an external module should supply
-a makefile that hides most of the complexity, so one only has to type
-'make' to build the module. A complete example will be presented in
-chapter 4, "Creating a kbuild file for an external module".
+Covered in this document is information aimed at developers interested
+in building out-of-tree (or "external") modules. The author of an
+external module should supply a makefile that hides most of the
+complexity, so one only has to type "make" to build the module. This is
+easily accomplished, and a complete example will be presented in
+section 3.
-=== 2. How to build external modules
+=== 2. How to Build External Modules
-kbuild offers functionality to build external modules, with the
-prerequisite that there is a pre-built kernel available with full source.
-A subset of the targets available when building the kernel is available
-when building an external module.
+To build external modules, you must have a prebuilt kernel available
+that contains the configuration and header files used in the build.
+Also, the kernel must have been built with modules enabled. If you are
+using a distribution kernel, there will be a package for the kernel you
+are running provided by your distribution.
---- 2.1 Building external modules
+An alternative is to use the "make" target "modules_prepare." This will
+make sure the kernel contains the information required. The target
+exists solely as a simple way to prepare a kernel source tree for
+building external modules.
- Use the following command to build an external module:
+NOTE: "modules_prepare" will not build Module.symvers even if
+CONFIG_MODVERSIONS is set; therefore, a full kernel build needs to be
+executed to make module versioning work.
- make -C <path-to-kernel> M=`pwd`
+--- 2.1 Command Syntax
- For the running kernel use:
+ The command to build an external module is:
- make -C /lib/modules/`uname -r`/build M=`pwd`
+ $ make -C <path_to_kernel_src> M=$PWD
- For the above command to succeed, the kernel must have been
- built with modules enabled.
+ The kbuild system knows that an external module is being built
+ due to the "M=<dir>" option given in the command.
- To install the modules that were just built:
+ To build against the running kernel use:
- make -C <path-to-kernel> M=`pwd` modules_install
+ $ make -C /lib/modules/`uname -r`/build M=$PWD
- More complex examples will be shown later, the above should
- be enough to get you started.
+ Then to install the module(s) just built, add the target
+ "modules_install" to the command:
---- 2.2 Available targets
+ $ make -C /lib/modules/`uname -r`/build M=$PWD modules_install
- $KDIR refers to the path to the kernel source top-level directory
+--- 2.2 Options
- make -C $KDIR M=`pwd`
- Will build the module(s) located in current directory.
- All output files will be located in the same directory
- as the module source.
- No attempts are made to update the kernel source, and it is
- a precondition that a successful make has been executed
- for the kernel.
+ ($KDIR refers to the path of the kernel source directory.)
- make -C $KDIR M=`pwd` modules
- The modules target is implied when no target is given.
- Same functionality as if no target was specified.
- See description above.
+ make -C $KDIR M=$PWD
- make -C $KDIR M=`pwd` modules_install
- Install the external module(s).
- Installation default is in /lib/modules/<kernel-version>/extra,
- but may be prefixed with INSTALL_MOD_PATH - see separate
- chapter.
+ -C $KDIR
+ The directory where the kernel source is located.
+ "make" will actually change to the specified directory
+ when executing and will change back when finished.
- make -C $KDIR M=`pwd` clean
- Remove all generated files for the module - the kernel
- source directory is not modified.
+ M=$PWD
+ Informs kbuild that an external module is being built.
+ The value given to "M" is the absolute path of the
+ directory where the external module (kbuild file) is
+ located.
- make -C $KDIR M=`pwd` help
- help will list the available target when building external
- modules.
+--- 2.3 Targets
---- 2.3 Available options:
+ When building an external module, only a subset of the "make"
+ targets are available.
- $KDIR refers to the path to the kernel source top-level directory
+ make -C $KDIR M=$PWD [target]
- make -C $KDIR
- Used to specify where to find the kernel source.
- '$KDIR' represent the directory where the kernel source is.
- Make will actually change directory to the specified directory
- when executed but change back when finished.
+ The default will build the module(s) located in the current
+ directory, so a target does not need to be specified. All
+ output files will also be generated in this directory. No
+ attempts are made to update the kernel source, and it is a
+ precondition that a successful "make" has been executed for the
+ kernel.
- make -C $KDIR M=`pwd`
- M= is used to tell kbuild that an external module is
- being built.
- The option given to M= is the directory where the external
- module (kbuild file) is located.
- When an external module is being built only a subset of the
- usual targets are available.
+ modules
+ The default target for external modules. It has the
+ same functionality as if no target was specified. See
+ description above.
- make -C $KDIR SUBDIRS=`pwd`
- Same as M=. The SUBDIRS= syntax is kept for backwards
- compatibility.
+ modules_install
+ Install the external module(s). The default location is
+ /lib/modules/<kernel_release>/extra/, but a prefix may
+ be added with INSTALL_MOD_PATH (discussed in section 5).
---- 2.4 Preparing the kernel tree for module build
+ clean
+ Remove all generated files in the module directory only.
- To make sure the kernel contains the information required to
- build external modules the target 'modules_prepare' must be used.
- 'modules_prepare' exists solely as a simple way to prepare
- a kernel source tree for building external modules.
- Note: modules_prepare will not build Module.symvers even if
- CONFIG_MODVERSIONS is set. Therefore a full kernel build
- needs to be executed to make module versioning work.
+ help
+ List the available targets for external modules.
---- 2.5 Building separate files for a module
- It is possible to build single files which are part of a module.
- This works equally well for the kernel, a module and even for
- external modules.
- Examples (module foo.ko, consist of bar.o, baz.o):
- make -C $KDIR M=`pwd` bar.lst
- make -C $KDIR M=`pwd` bar.o
- make -C $KDIR M=`pwd` foo.ko
- make -C $KDIR M=`pwd` /
-
-
-=== 3. Example commands
-
-This example shows the actual commands to be executed when building
-an external module for the currently running kernel.
-In the example below, the distribution is supposed to use the
-facility to locate output files for a kernel compile in a different
-directory than the kernel source - but the examples will also work
-when the source and the output files are mixed in the same directory.
+--- 2.4 Building Separate Files
-# Kernel source
-/lib/modules/<kernel-version>/source -> /usr/src/linux-<version>
-
-# Output from kernel compile
-/lib/modules/<kernel-version>/build -> /usr/src/linux-<version>-up
-
-Change to the directory where the kbuild file is located and execute
-the following commands to build the module:
+ It is possible to build single files that are part of a module.
+ This works equally well for the kernel, a module, and even for
+ external modules.
- cd /home/user/src/module
- make -C /usr/src/`uname -r`/source \
- O=/lib/modules/`uname-r`/build \
- M=`pwd`
+ Example (The module foo.ko, consist of bar.o and baz.o):
+ make -C $KDIR M=$PWD bar.lst
+ make -C $KDIR M=$PWD baz.o
+ make -C $KDIR M=$PWD foo.ko
+ make -C $KDIR M=$PWD /
-Then, to install the module use the following command:
- make -C /usr/src/`uname -r`/source \
- O=/lib/modules/`uname-r`/build \
- M=`pwd` \
- modules_install
+=== 3. Creating a Kbuild File for an External Module
-If you look closely you will see that this is the same command as
-listed before - with the directories spelled out.
+In the last section we saw the command to build a module for the
+running kernel. The module is not actually built, however, because a
+build file is required. Contained in this file will be the name of
+the module(s) being built, along with the list of requisite source
+files. The file may be as simple as a single line:
-The above are rather long commands, and the following chapter
-lists a few tricks to make it all easier.
+ obj-m := <module_name>.o
+The kbuild system will build <module_name>.o from <module_name>.c,
+and, after linking, will result in the kernel module <module_name>.ko.
+The above line can be put in either a "Kbuild" file or a "Makefile."
+When the module is built from multiple sources, an additional line is
+needed listing the files:
-=== 4. Creating a kbuild file for an external module
+ <module_name>-y := <src1>.o <src2>.o ...
-kbuild is the build system for the kernel, and external modules
-must use kbuild to stay compatible with changes in the build system
-and to pick up the right flags to gcc etc.
+NOTE: Further documentation describing the syntax used by kbuild is
+located in Documentation/kbuild/makefiles.txt.
-The kbuild file used as input shall follow the syntax described
-in Documentation/kbuild/makefiles.txt. This chapter will introduce a few
-more tricks to be used when dealing with external modules.
+The examples below demonstrate how to create a build file for the
+module 8123.ko, which is built from the following files:
-In the following a Makefile will be created for a module with the
-following files:
8123_if.c
8123_if.h
8123_pci.c
8123_bin.o_shipped <= Binary blob
---- 4.1 Shared Makefile for module and kernel
+--- 3.1 Shared Makefile
- An external module always includes a wrapper Makefile supporting
- building the module using 'make' with no arguments.
- The Makefile provided will most likely include additional
- functionality such as test targets etc. and this part shall
- be filtered away from kbuild since it may impact kbuild if
- name clashes occurs.
+ An external module always includes a wrapper makefile that
+ supports building the module using "make" with no arguments.
+ This target is not used by kbuild; it is only for convenience.
+ Additional functionality, such as test targets, can be included
+ but should be filtered out from kbuild due to possible name
+ clashes.
Example 1:
--> filename: Makefile
@@ -219,11 +189,11 @@ following files:
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
else
- # Normal Makefile
+ # normal makefile
+ KDIR ?= /lib/modules/`uname -r`/build
- KERNELDIR := /lib/modules/`uname -r`/build
- all::
- $(MAKE) -C $(KERNELDIR) M=`pwd` $@
+ default:
+ $(MAKE) -C $(KDIR) M=$$PWD
# Module specific targets
genbin:
@@ -231,15 +201,20 @@ following files:
endif
- In example 1, the check for KERNELRELEASE is used to separate
- the two parts of the Makefile. kbuild will only see the two
- assignments whereas make will see everything except the two
- kbuild assignments.
+ The check for KERNELRELEASE is used to separate the two parts
+ of the makefile. In the example, kbuild will only see the two
+ assignments, whereas "make" will see everything except these
+ two assignments. This is due to two passes made on the file:
+ the first pass is by the "make" instance run on the command
+ line; the second pass is by the kbuild system, which is
+ initiated by the parameterized "make" in the default target.
+
+--- 3.2 Separate Kbuild File and Makefile
- In recent versions of the kernel, kbuild will look for a file named
- Kbuild and as second option look for a file named Makefile.
- Utilising the Kbuild file makes us split up the Makefile in example 1
- into two files as shown in example 2:
+ In newer versions of the kernel, kbuild will first look for a
+ file named "Kbuild," and only if that is not found, will it
+ then look for a makefile. Utilizing a "Kbuild" file allows us
+ to split up the makefile from example 1 into two files:
Example 2:
--> filename: Kbuild
@@ -247,20 +222,21 @@ following files:
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
--> filename: Makefile
- KERNELDIR := /lib/modules/`uname -r`/build
- all::
- $(MAKE) -C $(KERNELDIR) M=`pwd` $@
+ KDIR ?= /lib/modules/`uname -r`/build
+
+ default:
+ $(MAKE) -C $(KDIR) M=$$PWD
# Module specific targets
genbin:
echo "X" > 8123_bin.o_shipped
+ The split in example 2 is questionable due to the simplicity of
+ each file; however, some external modules use makefiles
+ consisting of several hundred lines, and here it really pays
+ off to separate the kbuild part from the rest.
- In example 2, we are down to two fairly simple files and for simple
- files as used in this example the split is questionable. But some
- external modules use Makefiles of several hundred lines and here it
- really pays off to separate the kbuild part from the rest.
- Example 3 shows a backward compatible version.
+ The next example shows a backward compatible version.
Example 3:
--> filename: Kbuild
@@ -269,13 +245,15 @@ following files:
--> filename: Makefile
ifneq ($(KERNELRELEASE),)
+ # kbuild part of makefile
include Kbuild
+
else
- # Normal Makefile
+ # normal makefile
+ KDIR ?= /lib/modules/`uname -r`/build
- KERNELDIR := /lib/modules/`uname -r`/build
- all::
- $(MAKE) -C $(KERNELDIR) M=`pwd` $@
+ default:
+ $(MAKE) -C $(KDIR) M=$$PWD
# Module specific targets
genbin:
@@ -283,260 +261,271 @@ following files:
endif
- The trick here is to include the Kbuild file from Makefile, so
- if an older version of kbuild picks up the Makefile, the Kbuild
- file will be included.
+ Here the "Kbuild" file is included from the makefile. This
+ allows an older version of kbuild, which only knows of
+ makefiles, to be used when the "make" and kbuild parts are
+ split into separate files.
---- 4.2 Binary blobs included in a module
+--- 3.3 Binary Blobs
- Some external modules needs to include a .o as a blob. kbuild
- has support for this, but requires the blob file to be named
- <filename>_shipped. In our example the blob is named
- 8123_bin.o_shipped and when the kbuild rules kick in the file
- 8123_bin.o is created as a simple copy off the 8213_bin.o_shipped file
- with the _shipped part stripped of the filename.
- This allows the 8123_bin.o filename to be used in the assignment to
- the module.
+ Some external modules need to include an object file as a blob.
+ kbuild has support for this, but requires the blob file to be
+ named <filename>_shipped. When the kbuild rules kick in, a copy
+ of <filename>_shipped is created with _shipped stripped off,
+ giving us <filename>. This shortened filename can be used in
+ the assignment to the module.
+
+ Throughout this section, 8123_bin.o_shipped has been used to
+ build the kernel module 8123.ko; it has been included as
+ 8123_bin.o.
- Example 4:
- obj-m := 8123.o
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
- In example 4, there is no distinction between the ordinary .c/.h files
- and the binary file. But kbuild will pick up different rules to create
- the .o file.
+ Although there is no distinction between the ordinary source
+ files and the binary file, kbuild will pick up different rules
+ when creating the object file for the module.
+
+--- 3.4 Building Multiple Modules
+ kbuild supports building multiple modules with a single build
+ file. For example, if you wanted to build two modules, foo.ko
+ and bar.ko, the kbuild lines would be:
-=== 5. Include files
+ obj-m := foo.o bar.o
+ foo-y := <foo_srcs>
+ bar-y := <bar_srcs>
-Include files are a necessity when a .c file uses something from other .c
-files (not strictly in the sense of C, but if good programming practice is
-used). Any module that consists of more than one .c file will have a .h file
-for one of the .c files.
+ It is that simple!
-- If the .h file only describes a module internal interface, then the .h file
- shall be placed in the same directory as the .c files.
-- If the .h files describe an interface used by other parts of the kernel
- located in different directories, the .h files shall be located in
- include/linux/ or other include/ directories as appropriate.
-One exception for this rule is larger subsystems that have their own directory
-under include/ such as include/scsi. Another exception is arch-specific
-.h files which are located under include/asm-$(ARCH)/*.
+=== 4. Include Files
-External modules have a tendency to locate include files in a separate include/
-directory and therefore need to deal with this in their kbuild file.
+Within the kernel, header files are kept in standard locations
+according to the following rule:
---- 5.1 How to include files from the kernel include dir
+ * If the header file only describes the internal interface of a
+ module, then the file is placed in the same directory as the
+ source files.
+ * If the header file describes an interface used by other parts
+ of the kernel that are located in different directories, then
+ the file is placed in include/linux/.
- When a module needs to include a file from include/linux/, then one
- just uses:
+ NOTE: There are two notable exceptions to this rule: larger
+ subsystems have their own directory under include/, such as
+ include/scsi; and architecture specific headers are located
+ under arch/$(ARCH)/include/.
- #include <linux/modules.h>
+--- 4.1 Kernel Includes
- kbuild will make sure to add options to gcc so the relevant
- directories are searched.
- Likewise for .h files placed in the same directory as the .c file.
+ To include a header file located under include/linux/, simply
+ use:
- #include "8123_if.h"
+ #include <linux/module.h>
- will do the job.
+ kbuild will add options to "gcc" so the relevant directories
+ are searched.
---- 5.2 External modules using an include/ dir
+--- 4.2 Single Subdirectory
- External modules often locate their .h files in a separate include/
- directory although this is not usual kernel style. When an external
- module uses an include/ dir then kbuild needs to be told so.
- The trick here is to use either EXTRA_CFLAGS (take effect for all .c
- files) or CFLAGS_$F.o (take effect only for a single file).
+ External modules tend to place header files in a separate
+ include/ directory where their source is located, although this
+ is not the usual kernel style. To inform kbuild of the
+ directory, use either ccflags-y or CFLAGS_<filename>.o.
- In our example, if we move 8123_if.h to a subdirectory named include/
- the resulting Kbuild file would look like:
+ Using the example from section 3, if we moved 8123_if.h to a
+ subdirectory named include, the resulting kbuild file would
+ look like:
--> filename: Kbuild
- obj-m := 8123.o
+ obj-m := 8123.o
- EXTRA_CFLAGS := -Iinclude
+ ccflags-y := -Iinclude
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
- Note that in the assignment there is no space between -I and the path.
- This is a kbuild limitation: there must be no space present.
+ Note that in the assignment there is no space between -I and
+ the path. This is a limitation of kbuild: there must be no
+ space present.
---- 5.3 External modules using several directories
-
- If an external module does not follow the usual kernel style, but
- decides to spread files over several directories, then kbuild can
- handle this too.
+--- 4.3 Several Subdirectories
+ kbuild can handle files that are spread over several directories.
Consider the following example:
- |
- +- src/complex_main.c
- | +- hal/hardwareif.c
- | +- hal/include/hardwareif.h
- +- include/complex.h
-
- To build a single module named complex.ko, we then need the following
+ .
+ |__ src
+ | |__ complex_main.c
+ | |__ hal
+ | |__ hardwareif.c
+ | |__ include
+ | |__ hardwareif.h
+ |__ include
+ |__ complex.h
+
+ To build the module complex.ko, we then need the following
kbuild file:
- Kbuild:
+ --> filename: Kbuild
obj-m := complex.o
complex-y := src/complex_main.o
complex-y += src/hal/hardwareif.o
- EXTRA_CFLAGS := -I$(src)/include
- EXTRA_CFLAGS += -I$(src)src/hal/include
+ ccflags-y := -I$(src)/include
+ ccflags-y += -I$(src)/src/hal/include
+ As you can see, kbuild knows how to handle object files located
+ in other directories. The trick is to specify the directory
+ relative to the kbuild file's location. That being said, this
+ is NOT recommended practice.
- kbuild knows how to handle .o files located in another directory -
- although this is NOT recommended practice. The syntax is to specify
- the directory relative to the directory where the Kbuild file is
- located.
+ For the header files, kbuild must be explicitly told where to
+ look. When kbuild executes, the current directory is always the
+ root of the kernel tree (the argument to "-C") and therefore an
+ absolute path is needed. $(src) provides the absolute path by
+ pointing to the directory where the currently executing kbuild
+ file is located.
- To find the .h files, we have to explicitly tell kbuild where to look
- for the .h files. When kbuild executes, the current directory is always
- the root of the kernel tree (argument to -C) and therefore we have to
- tell kbuild how to find the .h files using absolute paths.
- $(src) will specify the absolute path to the directory where the
- Kbuild file are located when being build as an external module.
- Therefore -I$(src)/ is used to point out the directory of the Kbuild
- file and any additional path are just appended.
-=== 6. Module installation
+=== 5. Module Installation
-Modules which are included in the kernel are installed in the directory:
+Modules which are included in the kernel are installed in the
+directory:
- /lib/modules/$(KERNELRELEASE)/kernel
+ /lib/modules/$(KERNELRELEASE)/kernel/
-External modules are installed in the directory:
+And external modules are installed in:
- /lib/modules/$(KERNELRELEASE)/extra
+ /lib/modules/$(KERNELRELEASE)/extra/
---- 6.1 INSTALL_MOD_PATH
+--- 5.1 INSTALL_MOD_PATH
- Above are the default directories, but as always, some level of
- customization is possible. One can prefix the path using the variable
- INSTALL_MOD_PATH:
+ Above are the default directories but as always some level of
+ customization is possible. A prefix can be added to the
+ installation path using the variable INSTALL_MOD_PATH:
$ make INSTALL_MOD_PATH=/frodo modules_install
- => Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel
-
- INSTALL_MOD_PATH may be set as an ordinary shell variable or as in the
- example above, can be specified on the command line when calling make.
- INSTALL_MOD_PATH has effect both when installing modules included in
- the kernel as well as when installing external modules.
+ => Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel/
---- 6.2 INSTALL_MOD_DIR
+ INSTALL_MOD_PATH may be set as an ordinary shell variable or,
+ as shown above, can be specified on the command line when
+ calling "make." This has effect when installing both in-tree
+ and out-of-tree modules.
- When installing external modules they are by default installed to a
- directory under /lib/modules/$(KERNELRELEASE)/extra, but one may wish
- to locate modules for a specific functionality in a separate
- directory. For this purpose, one can use INSTALL_MOD_DIR to specify an
- alternative name to 'extra'.
+--- 5.2 INSTALL_MOD_DIR
- $ make INSTALL_MOD_DIR=gandalf -C KERNELDIR \
- M=`pwd` modules_install
- => Install dir: /lib/modules/$(KERNELRELEASE)/gandalf
+ External modules are by default installed to a directory under
+ /lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+ locate modules for a specific functionality in a separate
+ directory. For this purpose, use INSTALL_MOD_DIR to specify an
+ alternative name to "extra."
+ $ make INSTALL_MOD_DIR=gandalf -C $KDIR \
+ M=$PWD modules_install
+ => Install dir: /lib/modules/$(KERNELRELEASE)/gandalf/
-=== 7. Module versioning & Module.symvers
-Module versioning is enabled by the CONFIG_MODVERSIONS tag.
+=== 6. Module Versioning
-Module versioning is used as a simple ABI consistency check. The Module
-versioning creates a CRC value of the full prototype for an exported symbol and
-when a module is loaded/used then the CRC values contained in the kernel are
-compared with similar values in the module. If they are not equal, then the
-kernel refuses to load the module.
+Module versioning is enabled by the CONFIG_MODVERSIONS tag, and is used
+as a simple ABI consistency check. A CRC value of the full prototype
+for an exported symbol is created. When a module is loaded/used, the
+CRC values contained in the kernel are compared with similar values in
+the module; if they are not equal, the kernel refuses to load the
+module.
-Module.symvers contains a list of all exported symbols from a kernel build.
+Module.symvers contains a list of all exported symbols from a kernel
+build.
---- 7.1 Symbols from the kernel (vmlinux + modules)
+--- 6.1 Symbols From the Kernel (vmlinux + modules)
- During a kernel build, a file named Module.symvers will be generated.
- Module.symvers contains all exported symbols from the kernel and
- compiled modules. For each symbols, the corresponding CRC value
- is stored too.
+ During a kernel build, a file named Module.symvers will be
+ generated. Module.symvers contains all exported symbols from
+ the kernel and compiled modules. For each symbol, the
+ corresponding CRC value is also stored.
The syntax of the Module.symvers file is:
- <CRC> <Symbol> <module>
- Sample:
+ <CRC> <Symbol> <module>
+
0x2d036834 scsi_remove_host drivers/scsi/scsi_mod
- For a kernel build without CONFIG_MODVERSIONS enabled, the crc
- would read: 0x00000000
+ For a kernel build without CONFIG_MODVERSIONS enabled, the CRC
+ would read 0x00000000.
Module.symvers serves two purposes:
- 1) It lists all exported symbols both from vmlinux and all modules
- 2) It lists the CRC if CONFIG_MODVERSIONS is enabled
-
---- 7.2 Symbols and external modules
-
- When building an external module, the build system needs access to
- the symbols from the kernel to check if all external symbols are
- defined. This is done in the MODPOST step and to obtain all
- symbols, modpost reads Module.symvers from the kernel.
- If a Module.symvers file is present in the directory where
- the external module is being built, this file will be read too.
- During the MODPOST step, a new Module.symvers file will be written
- containing all exported symbols that were not defined in the kernel.
-
---- 7.3 Symbols from another external module
-
- Sometimes, an external module uses exported symbols from another
- external module. Kbuild needs to have full knowledge on all symbols
- to avoid spitting out warnings about undefined symbols.
- Three solutions exist to let kbuild know all symbols of more than
- one external module.
- The method with a top-level kbuild file is recommended but may be
- impractical in certain situations.
-
- Use a top-level Kbuild file
- If you have two modules: 'foo' and 'bar', and 'foo' needs
- symbols from 'bar', then one can use a common top-level kbuild
- file so both modules are compiled in same build.
-
- Consider following directory layout:
- ./foo/ <= contains the foo module
- ./bar/ <= contains the bar module
- The top-level Kbuild file would then look like:
-
- #./Kbuild: (this file may also be named Makefile)
+ 1) It lists all exported symbols from vmlinux and all modules.
+ 2) It lists the CRC if CONFIG_MODVERSIONS is enabled.
+
+--- 6.2 Symbols and External Modules
+
+ When building an external module, the build system needs access
+ to the symbols from the kernel to check if all external symbols
+ are defined. This is done in the MODPOST step. modpost obtains
+ the symbols by reading Module.symvers from the kernel source
+ tree. If a Module.symvers file is present in the directory
+ where the external module is being built, this file will be
+ read too. During the MODPOST step, a new Module.symvers file
+ will be written containing all exported symbols that were not
+ defined in the kernel.
+
+--- 6.3 Symbols From Another External Module
+
+ Sometimes, an external module uses exported symbols from
+ another external module. kbuild needs to have full knowledge of
+ all symbols to avoid spitting out warnings about undefined
+ symbols. Three solutions exist for this situation.
+
+ NOTE: The method with a top-level kbuild file is recommended
+ but may be impractical in certain situations.
+
+ Use a top-level kbuild file
+ If you have two modules, foo.ko and bar.ko, where
+ foo.ko needs symbols from bar.ko, you can use a
+ common top-level kbuild file so both modules are
+ compiled in the same build. Consider the following
+ directory layout:
+
+ ./foo/ <= contains foo.ko
+ ./bar/ <= contains bar.ko
+
+ The top-level kbuild file would then look like:
+
+ #./Kbuild (or ./Makefile):
obj-y := foo/ bar/
- Executing:
- make -C $KDIR M=`pwd`
+ And executing
+
+ $ make -C $KDIR M=$PWD
- will then do the expected and compile both modules with full
- knowledge on symbols from both modules.
+ will then do the expected and compile both modules with
+ full knowledge of symbols from either module.
Use an extra Module.symvers file
- When an external module is built, a Module.symvers file is
- generated containing all exported symbols which are not
- defined in the kernel.
- To get access to symbols from module 'bar', one can copy the
- Module.symvers file from the compilation of the 'bar' module
- to the directory where the 'foo' module is built.
- During the module build, kbuild will read the Module.symvers
- file in the directory of the external module and when the
- build is finished, a new Module.symvers file is created
- containing the sum of all symbols defined and not part of the
- kernel.
-
- Use make variable KBUILD_EXTRA_SYMBOLS in the Makefile
- If it is impractical to copy Module.symvers from another
- module, you can assign a space separated list of files to
- KBUILD_EXTRA_SYMBOLS in your Makfile. These files will be
- loaded by modpost during the initialisation of its symbol
- tables.
-
-=== 8. Tips & Tricks
-
---- 8.1 Testing for CONFIG_FOO_BAR
-
- Modules often need to check for certain CONFIG_ options to decide if
- a specific feature shall be included in the module. When kbuild is used
- this is done by referencing the CONFIG_ variable directly.
+ When an external module is built, a Module.symvers file
+ is generated containing all exported symbols which are
+ not defined in the kernel. To get access to symbols
+ from bar.ko, copy the Module.symvers file from the
+ compilation of bar.ko to the directory where foo.ko is
+ built. During the module build, kbuild will read the
+ Module.symvers file in the directory of the external
+ module, and when the build is finished, a new
+ Module.symvers file is created containing the sum of
+ all symbols defined and not part of the kernel.
+
+ Use "make" variable KBUILD_EXTRA_SYMBOLS
+ If it is impractical to copy Module.symvers from
+ another module, you can assign a space separated list
+ of files to KBUILD_EXTRA_SYMBOLS in your build file.
+ These files will be loaded by modpost during the
+ initialization of its symbol tables.
+
+
+=== 7. Tips & Tricks
+
+--- 7.1 Testing for CONFIG_FOO_BAR
+
+ Modules often need to check for certain CONFIG_ options to
+ decide if a specific feature is included in the module. In
+ kbuild this is done by referencing the CONFIG_ variable
+ directly.
#fs/ext2/Makefile
obj-$(CONFIG_EXT2_FS) += ext2.o
@@ -544,9 +533,9 @@ Module.symvers contains a list of all exported symbols from a kernel build.
ext2-y := balloc.o bitmap.o dir.o
ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o
- External modules have traditionally used grep to check for specific
- CONFIG_ settings directly in .config. This usage is broken.
- As introduced before, external modules shall use kbuild when building
- and therefore can use the same methods as in-kernel modules when
- testing for CONFIG_ definitions.
+ External modules have traditionally used "grep" to check for
+ specific CONFIG_ settings directly in .config. This usage is
+ broken. As introduced before, external modules should use
+ kbuild for building and can therefore use the same methods as
+ in-tree modules when testing for CONFIG_ definitions.
diff --git a/MAINTAINERS b/MAINTAINERS
index d0c2206fd632..b60de4b2713c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1613,7 +1613,7 @@ F: drivers/platform/x86/classmate-laptop.c
COCCINELLE/Semantic Patches (SmPL)
M: Julia Lawall <julia@diku.dk>
M: Gilles Muller <Gilles.Muller@lip6.fr>
-M: Nicolas Palix <npalix@diku.dk>
+M: Nicolas Palix <npalix.work@gmail.com>
L: cocci@diku.dk (moderated for non-subscribers)
W: http://coccinelle.lip6.fr/
S: Supported
diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c
index fc3b18d844af..98dec87974d0 100644
--- a/scripts/basic/docproc.c
+++ b/scripts/basic/docproc.c
@@ -333,7 +333,10 @@ static void docsect(char *filename, char *line)
if (*s == '\n')
*s = '\0';
- asprintf(&s, "DOC: %s", line);
+ if (asprintf(&s, "DOC: %s", line) < 0) {
+ perror("asprintf");
+ exit(1);
+ }
consume_symbol(s);
free(s);
diff --git a/scripts/coccicheck b/scripts/coccicheck
index b8bcf1f7bed7..1bb1a1bd2daa 100755
--- a/scripts/coccicheck
+++ b/scripts/coccicheck
@@ -16,6 +16,7 @@ if [ "$C" = "1" -o "$C" = "2" ]; then
else
ONLINE=0
FLAGS="-very_quiet"
+ OPTIONS="-dir $srctree"
fi
if [ ! -x "$SPATCH" ]; then
@@ -25,11 +26,13 @@ fi
if [ "$MODE" = "" ] ; then
if [ "$ONLINE" = "0" ] ; then
- echo 'You have not explicitly specify the mode to use. Fallback to "report".'
+ echo 'You have not explicitly specified the mode to use. Using default "chain" mode.'
+ echo 'All available modes will be tried (in that order): patch, report, context, org'
echo 'You can specify the mode with "make coccicheck MODE=<mode>"'
- echo 'Available modes are: report, patch, context, org'
fi
- MODE="report"
+ MODE="chain"
+elif [ "$MODE" = "report" -o "$MODE" = "org" ] ; then
+ FLAGS="$FLAGS -no_show_diff"
fi
if [ "$ONLINE" = "0" ] ; then
@@ -44,7 +47,7 @@ coccinelle () {
OPT=`grep "Option" $COCCI | cut -d':' -f2`
-# The option '-parse_cocci' can be used to syntaxically check the SmPL files.
+# The option '-parse_cocci' can be used to syntactically check the SmPL files.
#
# $SPATCH -D $MODE $FLAGS -parse_cocci $COCCI $OPT > /dev/null
@@ -52,21 +55,44 @@ coccinelle () {
FILE=`echo $COCCI | sed "s|$srctree/||"`
- echo "Processing `basename $COCCI` with option(s) \"$OPT\""
+ echo "Processing `basename $COCCI`"
+ echo "with option(s) \"$OPT\""
+ echo ''
echo 'Message example to submit a patch:'
- sed -e '/\/\/\//!d' -e 's|^///||' $COCCI
-
- echo ' The semantic patch that makes this change is available'
+ sed -ne 's|^///||p' $COCCI
+
+ if [ "$MODE" = "patch" ] ; then
+ echo ' The semantic patch that makes this change is available'
+ elif [ "$MODE" = "report" ] ; then
+ echo ' The semantic patch that makes this report is available'
+ elif [ "$MODE" = "context" ] ; then
+ echo ' The semantic patch that spots this code is available'
+ elif [ "$MODE" = "org" ] ; then
+ echo ' The semantic patch that makes this Org report is available'
+ else
+ echo ' The semantic patch that makes this output is available'
+ fi
echo " in $FILE."
echo ''
echo ' More information about semantic patching is available at'
echo ' http://coccinelle.lip6.fr/'
echo ''
- $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT -dir $srctree || exit 1
+ if [ "`sed -ne 's|^//#||p' $COCCI`" ] ; then
+ echo 'Semantic patch information:'
+ sed -ne 's|^//#||p' $COCCI
+ echo ''
+ fi
+ fi
+
+ if [ "$MODE" = "chain" ] ; then
+ $SPATCH -D patch $FLAGS -sp_file $COCCI $OPT $OPTIONS || \
+ $SPATCH -D report $FLAGS -sp_file $COCCI $OPT $OPTIONS -no_show_diff || \
+ $SPATCH -D context $FLAGS -sp_file $COCCI $OPT $OPTIONS || \
+ $SPATCH -D org $FLAGS -sp_file $COCCI $OPT $OPTIONS -no_show_diff || exit 1
else
- $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1
+ $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1
fi
}
diff --git a/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci b/scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci
index 7d4771d449c3..7d4771d449c3 100644
--- a/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
+++ b/scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci
diff --git a/scripts/coccinelle/alloc/kzalloc-simple.cocci b/scripts/coccinelle/api/alloc/kzalloc-simple.cocci
index 2eae828fc657..046b9b16f8f9 100644
--- a/scripts/coccinelle/alloc/kzalloc-simple.cocci
+++ b/scripts/coccinelle/api/alloc/kzalloc-simple.cocci
@@ -1,5 +1,9 @@
///
-/// kzalloc should be used rather than kmalloc followed by memset 0
+/// Use kzalloc rather than kmalloc followed by memset with 0
+///
+/// This considers some simple cases that are common and easy to validate
+/// Note in particular that there are no ...s in the rule, so all of the
+/// matched code has to be contiguous
///
// Confidence: High
// Copyright: (C) 2009-2010 Julia Lawall, Nicolas Palix, DIKU. GPLv2.
diff --git a/scripts/coccinelle/err_cast.cocci b/scripts/coccinelle/api/err_cast.cocci
index 2ce115000af6..2ce115000af6 100644
--- a/scripts/coccinelle/err_cast.cocci
+++ b/scripts/coccinelle/api/err_cast.cocci
diff --git a/scripts/coccinelle/api/kstrdup.cocci b/scripts/coccinelle/api/kstrdup.cocci
new file mode 100644
index 000000000000..e0805ad08d39
--- /dev/null
+++ b/scripts/coccinelle/api/kstrdup.cocci
@@ -0,0 +1,39 @@
+/// Use kstrdup rather than duplicating its implementation
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual patch
+
+@@
+expression from,to;
+expression flag,E1,E2;
+statement S;
+@@
+
+- to = kmalloc(strlen(from) + 1,flag);
++ to = kstrdup(from, flag);
+ ... when != \(from = E1 \| to = E1 \)
+ if (to==NULL || ...) S
+ ... when != \(from = E2 \| to = E2 \)
+- strcpy(to, from);
+
+@@
+expression x,from,to;
+expression flag,E1,E2,E3;
+statement S;
+@@
+
+- x = strlen(from) + 1;
+ ... when != \( x = E1 \| from = E1 \)
+- to = \(kmalloc\|kzalloc\)(x,flag);
++ to = kstrdup(from, flag);
+ ... when != \(x = E2 \| from = E2 \| to = E2 \)
+ if (to==NULL || ...) S
+ ... when != \(x = E3 \| from = E3 \| to = E3 \)
+- memcpy(to, from, x);
diff --git a/scripts/coccinelle/api/memdup.cocci b/scripts/coccinelle/api/memdup.cocci
new file mode 100644
index 000000000000..b5d722077dc1
--- /dev/null
+++ b/scripts/coccinelle/api/memdup.cocci
@@ -0,0 +1,40 @@
+/// Use kmemdup rather than duplicating its implementation
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual patch
+
+@r1@
+expression from,to;
+expression flag;
+position p;
+@@
+
+ to = \(kmalloc@p\|kzalloc@p\)(strlen(from) + 1,flag);
+
+@r2@
+expression x,from,to;
+expression flag,E1;
+position p;
+@@
+
+ x = strlen(from) + 1;
+ ... when != \( x = E1 \| from = E1 \)
+ to = \(kmalloc@p\|kzalloc@p\)(x,flag);
+
+@@
+expression from,to,size,flag;
+position p != {r1.p,r2.p};
+statement S;
+@@
+
+- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
++ to = kmemdup(from,size,flag);
+ if (to==NULL || ...) S
+- memcpy(to, from, size);
diff --git a/scripts/coccinelle/api/memdup_user.cocci b/scripts/coccinelle/api/memdup_user.cocci
new file mode 100644
index 000000000000..72ce012e878a
--- /dev/null
+++ b/scripts/coccinelle/api/memdup_user.cocci
@@ -0,0 +1,35 @@
+/// Use kmemdup_user rather than duplicating its implementation
+/// This is a little bit restricted to reduce false positives
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual patch
+
+@@
+expression from,to,size,flag;
+position p;
+identifier l1,l2;
+@@
+
+- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
++ to = memdup_user(from,size);
+ if (
+- to==NULL
++ IS_ERR(to)
+ || ...) {
+ <+... when != goto l1;
+- -ENOMEM
++ PTR_ERR(to)
+ ...+>
+ }
+- if (copy_from_user(to, from, size) != 0) {
+- <+... when != goto l2;
+- -EFAULT
+- ...+>
+- }
diff --git a/scripts/coccinelle/resource_size.cocci b/scripts/coccinelle/api/resource_size.cocci
index 1935a58b39d9..1935a58b39d9 100644
--- a/scripts/coccinelle/resource_size.cocci
+++ b/scripts/coccinelle/api/resource_size.cocci
diff --git a/scripts/coccinelle/free/kfree.cocci b/scripts/coccinelle/free/kfree.cocci
new file mode 100644
index 000000000000..f9f79d9245ee
--- /dev/null
+++ b/scripts/coccinelle/free/kfree.cocci
@@ -0,0 +1,117 @@
+/// Find a use after free.
+//# Values of variables may imply that some
+//# execution paths are not possible, resulting in false positives.
+//# Another source of false positives are macros such as
+//# SCTP_DBG_OBJCNT_DEC that do not actually evaluate their argument
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual org
+virtual report
+
+@free@
+expression E;
+position p1;
+@@
+
+kfree@p1(E)
+
+@print expression@
+constant char *c;
+expression free.E,E2;
+type T;
+position p;
+identifier f;
+@@
+
+(
+ f(...,c,...,(T)E@p,...)
+|
+ E@p == E2
+|
+ E@p != E2
+|
+ !E@p
+|
+ E@p || ...
+)
+
+@sz@
+expression free.E;
+position p;
+@@
+
+ sizeof(<+...E@p...+>)
+
+@loop exists@
+expression E;
+identifier l;
+position ok;
+@@
+
+while (1) { ...
+ kfree@ok(E)
+ ... when != break;
+ when != goto l;
+ when forall
+}
+
+@r exists@
+expression free.E, subE<=free.E, E2;
+expression E1;
+iterator iter;
+statement S;
+position free.p1!=loop.ok,p2!={print.p,sz.p};
+@@
+
+kfree@p1(E,...)
+...
+(
+ iter(...,subE,...) S // no use
+|
+ list_remove_head(E1,subE,...)
+|
+ subE = E2
+|
+ subE++
+|
+ ++subE
+|
+ --subE
+|
+ subE--
+|
+ &subE
+|
+ BUG(...)
+|
+ BUG_ON(...)
+|
+ return_VALUE(...)
+|
+ return_ACPI_STATUS(...)
+|
+ E@p2 // bad use
+)
+
+@script:python depends on org@
+p1 << free.p1;
+p2 << r.p2;
+@@
+
+cocci.print_main("kfree",p1)
+cocci.print_secs("ref",p2)
+
+@script:python depends on report@
+p1 << free.p1;
+p2 << r.p2;
+@@
+
+msg = "reference preceded by free on line %s" % (p1[0].line)
+coccilib.report.print_report(p2[0],msg)
diff --git a/scripts/coccinelle/iterators/fen.cocci b/scripts/coccinelle/iterators/fen.cocci
new file mode 100644
index 000000000000..77bc108c3f59
--- /dev/null
+++ b/scripts/coccinelle/iterators/fen.cocci
@@ -0,0 +1,64 @@
+/// These iterators only exit normally when the loop cursor is NULL, so there
+/// is no point to call of_node_put on the final value.
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual patch
+
+@@
+iterator name for_each_node_by_name;
+expression np,E;
+identifier l;
+@@
+
+for_each_node_by_name(np,...) {
+ ... when != break;
+ when != goto l;
+}
+... when != np = E
+- of_node_put(np);
+
+@@
+iterator name for_each_node_by_type;
+expression np,E;
+identifier l;
+@@
+
+for_each_node_by_type(np,...) {
+ ... when != break;
+ when != goto l;
+}
+... when != np = E
+- of_node_put(np);
+
+@@
+iterator name for_each_compatible_node;
+expression np,E;
+identifier l;
+@@
+
+for_each_compatible_node(np,...) {
+ ... when != break;
+ when != goto l;
+}
+... when != np = E
+- of_node_put(np);
+
+@@
+iterator name for_each_matching_node;
+expression np,E;
+identifier l;
+@@
+
+for_each_matching_node(np,...) {
+ ... when != break;
+ when != goto l;
+}
+... when != np = E
+- of_node_put(np);
diff --git a/scripts/coccinelle/iterators/itnull.cocci b/scripts/coccinelle/iterators/itnull.cocci
new file mode 100644
index 000000000000..baa4297a4ed1
--- /dev/null
+++ b/scripts/coccinelle/iterators/itnull.cocci
@@ -0,0 +1,58 @@
+/// Many iterators have the property that the first argument is always bound
+/// to a real list element, never NULL. False positives arise for some
+/// iterators that do not have this property, or in cases when the loop
+/// cursor is reassigned. The latter should only happen when the matched
+/// code is on the way to a loop exit (break, goto, or return).
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual patch
+
+@@
+iterator I;
+expression x,E,E1,E2;
+statement S,S1,S2;
+@@
+
+I(x,...) { <...
+(
+- if (x == NULL && ...) S
+|
+- if (x != NULL || ...)
+ S
+|
+- (x == NULL) ||
+ E
+|
+- (x != NULL) &&
+ E
+|
+- (x == NULL && ...) ? E1 :
+ E2
+|
+- (x != NULL || ...) ?
+ E1
+- : E2
+|
+- if (x == NULL && ...) S1 else
+ S2
+|
+- if (x != NULL || ...)
+ S1
+- else S2
+|
++ BAD(
+ x == NULL
++ )
+|
++ BAD(
+ x != NULL
++ )
+)
+ ...> } \ No newline at end of file
diff --git a/scripts/coccinelle/iterators/list_entry_update.cocci b/scripts/coccinelle/iterators/list_entry_update.cocci
new file mode 100644
index 000000000000..b2967475679b
--- /dev/null
+++ b/scripts/coccinelle/iterators/list_entry_update.cocci
@@ -0,0 +1,62 @@
+/// list_for_each_entry uses its first argument to get from one element of
+/// the list to the next, so it is usually not a good idea to reassign it.
+/// The first rule finds such a reassignment and the second rule checks
+/// that there is a path from the reassignment back to the top of the loop.
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual context
+virtual org
+virtual report
+
+@r@
+iterator name list_for_each_entry;
+expression x,E;
+position p1,p2;
+@@
+
+list_for_each_entry@p1(x,...) { <... x =@p2 E ...> }
+
+@depends on context && !org && !report@
+expression x,E;
+position r.p1,r.p2;
+statement S;
+@@
+
+*x =@p2 E
+...
+list_for_each_entry@p1(x,...) S
+
+// ------------------------------------------------------------------------
+
+@back depends on (org || report) && !context exists@
+expression x,E;
+position r.p1,r.p2;
+statement S;
+@@
+
+x =@p2 E
+...
+list_for_each_entry@p1(x,...) S
+
+@script:python depends on back && org@
+p1 << r.p1;
+p2 << r.p2;
+@@
+
+cocci.print_main("iterator",p1)
+cocci.print_secs("update",p2)
+
+@script:python depends on back && report@
+p1 << r.p1;
+p2 << r.p2;
+@@
+
+msg = "iterator with update on line %s" % (p2[0].line)
+coccilib.report.print_report(p1[0],msg)
diff --git a/scripts/coccinelle/locks/call_kern.cocci b/scripts/coccinelle/locks/call_kern.cocci
new file mode 100644
index 000000000000..00af5344a68f
--- /dev/null
+++ b/scripts/coccinelle/locks/call_kern.cocci
@@ -0,0 +1,74 @@
+/// Find functions that refer to GFP_KERNEL but are called with locks held.
+/// The proposed change of converting the GFP_KERNEL is not necessarily the
+/// correct one. It may be desired to unlock the lock, or to not call the
+/// function under the lock in the first place.
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual patch
+
+@gfp exists@
+identifier fn;
+position p;
+@@
+
+fn(...) {
+ ... when != read_unlock_irq(...)
+ when != write_unlock_irq(...)
+ when != read_unlock_irqrestore(...)
+ when != write_unlock_irqrestore(...)
+ when != spin_unlock(...)
+ when != spin_unlock_irq(...)
+ when != spin_unlock_irqrestore(...)
+ when != local_irq_enable(...)
+ when any
+ GFP_KERNEL@p
+ ... when any
+}
+
+@locked@
+identifier gfp.fn;
+@@
+
+(
+read_lock_irq
+|
+write_lock_irq
+|
+read_lock_irqsave
+|
+write_lock_irqsave
+|
+spin_lock
+|
+spin_trylock
+|
+spin_lock_irq
+|
+spin_lock_irqsave
+|
+local_irq_disable
+)
+ (...)
+... when != read_unlock_irq(...)
+ when != write_unlock_irq(...)
+ when != read_unlock_irqrestore(...)
+ when != write_unlock_irqrestore(...)
+ when != spin_unlock(...)
+ when != spin_unlock_irq(...)
+ when != spin_unlock_irqrestore(...)
+ when != local_irq_enable(...)
+fn(...)
+
+@depends on locked@
+position gfp.p;
+@@
+
+- GFP_KERNEL@p
++ GFP_ATOMIC
diff --git a/scripts/coccinelle/locks/double_lock.cocci b/scripts/coccinelle/locks/double_lock.cocci
new file mode 100644
index 000000000000..63b24e682fad
--- /dev/null
+++ b/scripts/coccinelle/locks/double_lock.cocci
@@ -0,0 +1,92 @@
+/// Find double locks. False positives may occur when some paths cannot
+/// occur at execution, due to the values of variables, and when there is
+/// an intervening function call that releases the lock.
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual org
+virtual report
+
+@locked@
+position p1;
+expression E1;
+position p;
+@@
+
+(
+mutex_lock@p1
+|
+mutex_trylock@p1
+|
+spin_lock@p1
+|
+spin_trylock@p1
+|
+read_lock@p1
+|
+read_trylock@p1
+|
+write_lock@p1
+|
+write_trylock@p1
+) (E1@p,...);
+
+@balanced@
+position p1 != locked.p1;
+position locked.p;
+identifier lock,unlock;
+expression x <= locked.E1;
+expression E,locked.E1;
+expression E2;
+@@
+
+if (E) {
+ <+... when != E1
+ lock(E1@p,...)
+ ...+>
+}
+... when != E1
+ when != \(x = E2\|&x\)
+ when forall
+if (E) {
+ <+... when != E1
+ unlock@p1(E1,...)
+ ...+>
+}
+
+@r depends on !balanced exists@
+expression x <= locked.E1;
+expression locked.E1;
+expression E2;
+identifier lock;
+position locked.p,p1,p2;
+@@
+
+lock@p1 (E1@p,...);
+... when != E1
+ when != \(x = E2\|&x\)
+lock@p2 (E1,...);
+
+@script:python depends on org@
+p1 << r.p1;
+p2 << r.p2;
+lock << r.lock;
+@@
+
+cocci.print_main(lock,p1)
+cocci.print_secs("second lock",p2)
+
+@script:python depends on report@
+p1 << r.p1;
+p2 << r.p2;
+lock << r.lock;
+@@
+
+msg = "second lock on line %s" % (p2[0].line)
+coccilib.report.print_report(p1[0],msg)
diff --git a/scripts/coccinelle/locks/flags.cocci b/scripts/coccinelle/locks/flags.cocci
new file mode 100644
index 000000000000..b4344d838097
--- /dev/null
+++ b/scripts/coccinelle/locks/flags.cocci
@@ -0,0 +1,80 @@
+/// Find nested lock+irqsave functions that use the same flags variables
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual context
+virtual org
+virtual report
+
+@r@
+expression lock1,lock2,flags;
+position p1,p2;
+@@
+
+(
+spin_lock_irqsave@p1(lock1,flags)
+|
+read_lock_irqsave@p1(lock1,flags)
+|
+write_lock_irqsave@p1(lock1,flags)
+)
+... when != flags
+(
+spin_lock_irqsave(lock1,flags)
+|
+read_lock_irqsave(lock1,flags)
+|
+write_lock_irqsave(lock1,flags)
+|
+spin_lock_irqsave@p2(lock2,flags)
+|
+read_lock_irqsave@p2(lock2,flags)
+|
+write_lock_irqsave@p2(lock2,flags)
+)
+
+@d@
+expression f <= r.flags;
+expression lock1,lock2,flags;
+position r.p1, r.p2;
+@@
+
+(
+*spin_lock_irqsave@p1(lock1,flags)
+|
+*read_lock_irqsave@p1(lock1,flags)
+|
+*write_lock_irqsave@p1(lock1,flags)
+)
+... when != f
+(
+*spin_lock_irqsave@p2(lock2,flags)
+|
+*read_lock_irqsave@p2(lock2,flags)
+|
+*write_lock_irqsave@p2(lock2,flags)
+)
+
+// ----------------------------------------------------------------------
+
+@script:python depends on d && org@
+p1 << r.p1;
+p2 << r.p2;
+@@
+
+cocci.print_main("original lock",p1)
+cocci.print_secs("nested lock+irqsave that reuses flags",p2)
+
+@script:python depends on d && report@
+p1 << r.p1;
+p2 << r.p2;
+@@
+
+msg="ERROR: nested lock+irqsave that reuses flags from %s." % (p1[0].line)
+coccilib.report.print_report(p2[0], msg)
diff --git a/scripts/coccinelle/locks/mini_lock.cocci b/scripts/coccinelle/locks/mini_lock.cocci
new file mode 100644
index 000000000000..7641a2925434
--- /dev/null
+++ b/scripts/coccinelle/locks/mini_lock.cocci
@@ -0,0 +1,95 @@
+/// Find missing unlocks. This semantic match considers the specific case
+/// where the unlock is missing from an if branch, and there is a lock
+/// before the if and an unlock after the if. False positives are due to
+/// cases where the if branch represents a case where the function is
+/// supposed to exit with the lock held, or where there is some preceding
+/// function call that releases the lock.
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual org
+virtual report
+
+@prelocked@
+position p1,p;
+expression E1;
+@@
+
+(
+mutex_lock@p1
+|
+mutex_trylock@p1
+|
+spin_lock@p1
+|
+spin_trylock@p1
+|
+read_lock@p1
+|
+read_trylock@p1
+|
+write_lock@p1
+|
+write_trylock@p1
+|
+read_lock_irq@p1
+|
+write_lock_irq@p1
+|
+read_lock_irqsave@p1
+|
+write_lock_irqsave@p1
+|
+spin_lock_irq@p1
+|
+spin_lock_irqsave@p1
+) (E1@p,...);
+
+@looped@
+position r;
+@@
+
+for(...;...;...) { <+... return@r ...; ...+> }
+
+@err@
+expression E1;
+position prelocked.p;
+position up != prelocked.p1;
+position r!=looped.r;
+identifier lock,unlock;
+@@
+
+lock(E1@p,...);
+<+... when != E1
+if (...) {
+ ... when != E1
+ return@r ...;
+}
+...+>
+unlock@up(E1,...);
+
+@script:python depends on org@
+p << prelocked.p1;
+lock << err.lock;
+unlock << err.unlock;
+p2 << err.r;
+@@
+
+cocci.print_main(lock,p)
+cocci.print_secs(unlock,p2)
+
+@script:python depends on report@
+p << prelocked.p1;
+lock << err.lock;
+unlock << err.unlock;
+p2 << err.r;
+@@
+
+msg = "preceding lock on line %s" % (p[0].line)
+coccilib.report.print_report(p2[0],msg)
diff --git a/scripts/coccinelle/misc/doubleinit.cocci b/scripts/coccinelle/misc/doubleinit.cocci
new file mode 100644
index 000000000000..55d7dc19dfe0
--- /dev/null
+++ b/scripts/coccinelle/misc/doubleinit.cocci
@@ -0,0 +1,53 @@
+/// Find duplicate field initializations. This has a high rate of false
+/// positives due to #ifdefs, which Coccinelle is not aware of in a structure
+/// initialization.
+///
+// Confidence: Low
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual org
+virtual report
+
+@r@
+identifier I, s, fld;
+position p0,p;
+expression E;
+@@
+
+struct I s =@p0 { ... .fld@p = E, ...};
+
+@s@
+identifier I, s, r.fld;
+position r.p0,p;
+expression E;
+@@
+
+struct I s =@p0 { ... .fld@p = E, ...};
+
+@script:python depends on org@
+p0 << r.p0;
+fld << r.fld;
+ps << s.p;
+pr << r.p;
+@@
+
+if int(ps[0].line) < int(pr[0].line) or (int(ps[0].line) == int(pr[0].line) and int(ps[0].column) < int(pr[0].column)):
+ cocci.print_main(fld,p0)
+ cocci.print_secs("s",ps)
+ cocci.print_secs("r",pr)
+
+@script:python depends on report@
+p0 << r.p0;
+fld << r.fld;
+ps << s.p;
+pr << r.p;
+@@
+
+if int(ps[0].line) < int(pr[0].line) or (int(ps[0].line) == int(pr[0].line) and int(ps[0].column) < int(pr[0].column)):
+ msg = "%s: first occurrence %s, second occurrence %s" % (fld,ps[0].line,pr[0].line)
+ coccilib.report.print_report(p0[0],msg)
diff --git a/scripts/coccinelle/misc/ifcol.cocci b/scripts/coccinelle/misc/ifcol.cocci
new file mode 100644
index 000000000000..b7ed91dbeb95
--- /dev/null
+++ b/scripts/coccinelle/misc/ifcol.cocci
@@ -0,0 +1,48 @@
+/// Find confusingly indented code in or after an if. An if branch should
+/// be indented. The code following an if should not be indented.
+/// Sometimes, code after an if that is indented is actually intended to be
+/// part of the if branch.
+///
+/// This has a high rate of false positives, because Coccinelle's column
+/// calculation does not distinguish between spaces and tabs, so code that
+/// is not visually aligned may be considered to be in the same column.
+///
+// Confidence: Low
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual org
+virtual report
+
+@r disable braces4@
+position p1,p2;
+statement S1,S2;
+@@
+
+(
+if (...) { ... }
+|
+if (...) S1@p1 S2@p2
+)
+
+@script:python depends on org@
+p1 << r.p1;
+p2 << r.p2;
+@@
+
+if (p1[0].column == p2[0].column):
+ cocci.print_main("branch",p1)
+ cocci.print_secs("after",p2)
+
+@script:python depends on report@
+p1 << r.p1;
+p2 << r.p2;
+@@
+
+if (p1[0].column == p2[0].column):
+ msg = "code aligned with following code on line %s" % (p2[0].line)
+ coccilib.report.print_report(p1[0],msg)
diff --git a/scripts/coccinelle/deref_null.cocci b/scripts/coccinelle/null/deref_null.cocci
index 9969d76d0f4b..9969d76d0f4b 100644
--- a/scripts/coccinelle/deref_null.cocci
+++ b/scripts/coccinelle/null/deref_null.cocci
diff --git a/scripts/coccinelle/null/eno.cocci b/scripts/coccinelle/null/eno.cocci
new file mode 100644
index 000000000000..4c9c52b9c413
--- /dev/null
+++ b/scripts/coccinelle/null/eno.cocci
@@ -0,0 +1,20 @@
+/// The various basic memory allocation functions don't return ERR_PTR
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual patch
+
+@@
+expression x,E;
+@@
+
+x = \(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...)
+... when != x = E
+- IS_ERR(x)
++ !x
diff --git a/scripts/coccinelle/null/kmerr.cocci b/scripts/coccinelle/null/kmerr.cocci
new file mode 100644
index 000000000000..949bf656c64c
--- /dev/null
+++ b/scripts/coccinelle/null/kmerr.cocci
@@ -0,0 +1,72 @@
+/// This semantic patch looks for kmalloc etc that are not followed by a
+/// NULL check. It only gives a report in the case where there is some
+/// error handling code later in the function, which may be helpful
+/// in determining what the error handling code for the call to kmalloc etc
+/// should be.
+///
+// Confidence: High
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual context
+virtual org
+virtual report
+
+@withtest@
+expression x;
+position p;
+identifier f,fld;
+@@
+
+x@p = f(...);
+... when != x->fld
+\(x == NULL \| x != NULL\)
+
+@fixed depends on context && !org && !report@
+expression x,x1;
+position p1 != withtest.p;
+statement S;
+position any withtest.p;
+identifier f;
+@@
+
+*x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
+...
+*x1@p = f(...);
+if (!x1) S
+
+// ------------------------------------------------------------------------
+
+@rfixed depends on (org || report) && !context exists@
+expression x,x1;
+position p1 != withtest.p;
+position p2;
+statement S;
+position any withtest.p;
+identifier f;
+@@
+
+x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
+...
+x1@p = f@p2(...);
+if (!x1) S
+
+@script:python depends on org@
+p1 << rfixed.p1;
+p2 << rfixed.p2;
+@@
+
+cocci.print_main("alloc call",p1)
+cocci.print_secs("possible model",p2)
+
+@script:python depends on report@
+p1 << rfixed.p1;
+p2 << rfixed.p2;
+@@
+
+msg = "alloc with no test, possible model on line %s" % (p2[0].line)
+coccilib.report.print_report(p1[0],msg)
diff --git a/scripts/coccinelle/tests/doublebitand.cocci b/scripts/coccinelle/tests/doublebitand.cocci
new file mode 100644
index 000000000000..9ba73d05a77e
--- /dev/null
+++ b/scripts/coccinelle/tests/doublebitand.cocci
@@ -0,0 +1,54 @@
+/// Find bit operations that include the same argument more than once
+//# One source of false positives is when the argument performs a side
+//# effect. Another source of false positives is when a neutral value
+//# such as 0 for | is used to indicate no information, to maintain the
+//# same structure as other similar expressions
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual context
+virtual org
+virtual report
+
+@r expression@
+expression E;
+position p;
+@@
+
+(
+* E@p
+ & ... & E
+|
+* E@p
+ | ... | E
+|
+* E@p
+ & ... & !E
+|
+* E@p
+ | ... | !E
+|
+* !E@p
+ & ... & E
+|
+* !E@p
+ | ... | E
+)
+
+@script:python depends on org@
+p << r.p;
+@@
+
+cocci.print_main("duplicated argument to & or |",p)
+
+@script:python depends on report@
+p << r.p;
+@@
+
+coccilib.report.print_report(p[0],"duplicated argument to & or |")
diff --git a/scripts/coccinelle/tests/doubletest.cocci b/scripts/coccinelle/tests/doubletest.cocci
new file mode 100644
index 000000000000..13a2c0e8a4bf
--- /dev/null
+++ b/scripts/coccinelle/tests/doubletest.cocci
@@ -0,0 +1,40 @@
+/// Find &&/|| operations that include the same argument more than once
+//# A common source of false positives is when the argument performs a side
+//# effect.
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments:
+// Options: -no_includes -include_headers
+
+virtual context
+virtual org
+virtual report
+
+@r expression@
+expression E;
+position p;
+@@
+
+(
+* E@p
+ || ... || E
+|
+* E@p
+ && ... && E
+)
+
+@script:python depends on org@
+p << r.p;
+@@
+
+cocci.print_main("duplicated argument to && or ||",p)
+
+@script:python depends on report@
+p << r.p;
+@@
+
+coccilib.report.print_report(p[0],"duplicated argument to && or ||")
diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig
index 37f30d36c944..1512c0a755ac 100755
--- a/scripts/extract-ikconfig
+++ b/scripts/extract-ikconfig
@@ -7,12 +7,10 @@
# The obscure use of the "tr" filter is to work around older versions of
# "grep" that report the byte offset of the line instead of the pattern.
#
-# (c) 2009, Dick Streefland <dick@streefland.net>
+# (c) 2009,2010 Dick Streefland <dick@streefland.net>
# Licensed under the terms of the GNU General Public License.
# ----------------------------------------------------------------------
-gz1='\037\213\010'
-gz2='01'
cf1='IKCFG_ST\037\213\010'
cf2='0123456789'
@@ -21,11 +19,25 @@ dump_config()
if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
then
pos=${pos%%:*}
- tail -c+$(($pos+8)) "$1" | zcat -q
- exit 0
+ tail -c+$(($pos+8)) "$1" | zcat > $tmp1 2> /dev/null
+ if [ $? != 1 ]
+ then # exit status must be 0 or 2 (trailing garbage warning)
+ cat $tmp1
+ exit 0
+ fi
fi
}
+try_decompress()
+{
+ for pos in `tr "$1\n$2" "\n$2=" < "$img" | grep -abo "^$2"`
+ do
+ pos=${pos%%:*}
+ tail -c+$pos "$img" | $3 > $tmp2 2> /dev/null
+ dump_config $tmp2
+ done
+}
+
# Check invocation:
me=${0##*/}
img=$1
@@ -35,18 +47,19 @@ then
exit 2
fi
+# Prepare temp files:
+tmp1=/tmp/ikconfig$$.1
+tmp2=/tmp/ikconfig$$.2
+trap "rm -f $tmp1 $tmp2" 0
+
# Initial attempt for uncompressed images or objects:
dump_config "$img"
-# That didn't work, so decompress and try again:
-tmp=/tmp/ikconfig$$
-trap "rm -f $tmp" 0
-for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"`
-do
- pos=${pos%%:*}
- tail -c+$pos "$img" | zcat 2> /dev/null > $tmp
- dump_config $tmp
-done
+# That didn't work, so retry after decompression.
+try_decompress '\037\213\010' xy gunzip
+try_decompress 'BZh' xy bunzip2
+try_decompress '\135\0\0\0' xxx unlzma
+try_decompress '\211\114\132' xy 'lzop -d'
# Bail out:
echo "$me: Cannot find kernel config." >&2
diff --git a/scripts/namespace.pl b/scripts/namespace.pl
index 361d0f71184b..a71be6b7cdec 100755
--- a/scripts/namespace.pl
+++ b/scripts/namespace.pl
@@ -84,6 +84,64 @@ my %ksymtab = (); # names that appear in __ksymtab_
my %ref = (); # $ref{$name} exists if there is a true external reference to $name
my %export = (); # $export{$name} exists if there is an EXPORT_... of $name
+my %nmexception = (
+ 'fs/ext3/bitmap' => 1,
+ 'fs/ext4/bitmap' => 1,
+ 'arch/x86/lib/thunk_32' => 1,
+ 'arch/x86/lib/cmpxchg' => 1,
+ 'arch/x86/vdso/vdso32/note' => 1,
+ 'lib/irq_regs' => 1,
+ 'usr/initramfs_data' => 1,
+ 'drivers/scsi/aic94xx/aic94xx_dump' => 1,
+ 'drivers/scsi/libsas/sas_dump' => 1,
+ 'lib/dec_and_lock' => 1,
+ 'drivers/ide/ide-probe-mini' => 1,
+ 'usr/initramfs_data' => 1,
+ 'drivers/acpi/acpia/exdump' => 1,
+ 'drivers/acpi/acpia/rsdump' => 1,
+ 'drivers/acpi/acpia/nsdumpdv' => 1,
+ 'drivers/acpi/acpia/nsdump' => 1,
+ 'arch/ia64/sn/kernel/sn2/io' => 1,
+ 'arch/ia64/kernel/gate-data' => 1,
+ 'security/capability' => 1,
+ 'fs/ntfs/sysctl' => 1,
+ 'fs/jfs/jfs_debug' => 1,
+);
+
+my %nameexception = (
+ 'mod_use_count_' => 1,
+ '__initramfs_end' => 1,
+ '__initramfs_start' => 1,
+ '_einittext' => 1,
+ '_sinittext' => 1,
+ 'kallsyms_names' => 1,
+ 'kallsyms_num_syms' => 1,
+ 'kallsyms_addresses'=> 1,
+ '__this_module' => 1,
+ '_etext' => 1,
+ '_edata' => 1,
+ '_end' => 1,
+ '__bss_start' => 1,
+ '_text' => 1,
+ '_stext' => 1,
+ '__gp' => 1,
+ 'ia64_unw_start' => 1,
+ 'ia64_unw_end' => 1,
+ '__init_begin' => 1,
+ '__init_end' => 1,
+ '__bss_stop' => 1,
+ '__nosave_begin' => 1,
+ '__nosave_end' => 1,
+ 'pg0' => 1,
+ 'vdso_enabled' => 1,
+ '__stack_chk_fail' => 1,
+ 'VDSO32_PRELINK' => 1,
+ 'VDSO32_vsyscall' => 1,
+ 'VDSO32_rt_sigreturn'=>1,
+ 'VDSO32_sigreturn' => 1,
+);
+
+
&find(\&linux_objects, '.'); # find the objects and do_nm on them
&list_multiply_defined();
&resolve_external_references();
@@ -105,7 +163,8 @@ sub linux_objects
if (/.*\.o$/ &&
! (
m:/built-in.o$:
- || m:arch/x86/kernel/vsyscall-syms.o$:
+ || m:arch/x86/vdso/:
+ || m:arch/x86/boot/:
|| m:arch/ia64/ia32/ia32.o$:
|| m:arch/ia64/kernel/gate-syms.o$:
|| m:arch/ia64/lib/__divdi3.o$:
@@ -148,6 +207,7 @@ sub linux_objects
|| m:^.*/\.tmp_:
|| m:^\.tmp_:
|| m:/vmlinux-obj.o$:
+ || m:^tools/:
)
) {
do_nm($basename, $_);
@@ -167,11 +227,11 @@ sub do_nm
printf STDERR "$fullname is not an object file\n";
return;
}
- ($source = $fullname) =~ s/\.o$//;
- if (-e "$objtree$source.c" || -e "$objtree$source.S") {
- $source = "$objtree$source";
+ ($source = $basename) =~ s/\.o$//;
+ if (-e "$source.c" || -e "$source.S") {
+ $source = "$objtree$File::Find::dir/$source";
} else {
- $source = "$srctree$source";
+ $source = "$srctree$File::Find::dir/$source";
}
if (! -e "$source.c" && ! -e "$source.S") {
# No obvious source, exclude the object if it is conglomerate
@@ -214,6 +274,7 @@ sub do_nm
# T global label/procedure
# U external reference
# W weak external reference to text that has been resolved
+ # V similar to W, but the value of the weak symbol becomes zero with no error.
# a assembler equate
# b static variable, uninitialised
# d static variable, initialised
@@ -222,8 +283,9 @@ sub do_nm
# s static variable, uninitialised, small bss
# t static label/procedures
# w weak external reference to text that has not been resolved
+ # v similar to w
# ? undefined type, used a lot by modules
- if ($type !~ /^[ABCDGRSTUWabdgrstw?]$/) {
+ if ($type !~ /^[ABCDGRSTUWVabdgrstwv?]$/) {
printf STDERR "nm output for $fullname contains unknown type '$_'\n";
}
elsif ($name =~ /\./) {
@@ -234,7 +296,7 @@ sub do_nm
# binutils keeps changing the type for exported symbols, force it to R
$type = 'R' if ($name =~ /^__ksymtab/ || $name =~ /^__kstrtab/);
$name =~ s/_R[a-f0-9]{8}$//; # module versions adds this
- if ($type =~ /[ABCDGRSTW]/ &&
+ if ($type =~ /[ABCDGRSTWV]/ &&
$name ne 'init_module' &&
$name ne 'cleanup_module' &&
$name ne 'Using_Versions' &&
@@ -270,27 +332,9 @@ sub do_nm
close($nmdata);
if ($#nmdata < 0) {
- if (
- $fullname ne "lib/brlock.o"
- && $fullname ne "lib/dec_and_lock.o"
- && $fullname ne "fs/xfs/xfs_macros.o"
- && $fullname ne "drivers/ide/ide-probe-mini.o"
- && $fullname ne "usr/initramfs_data.o"
- && $fullname ne "drivers/acpi/executer/exdump.o"
- && $fullname ne "drivers/acpi/resources/rsdump.o"
- && $fullname ne "drivers/acpi/namespace/nsdumpdv.o"
- && $fullname ne "drivers/acpi/namespace/nsdump.o"
- && $fullname ne "arch/ia64/sn/kernel/sn2/io.o"
- && $fullname ne "arch/ia64/kernel/gate-data.o"
- && $fullname ne "drivers/ieee1394/oui.o"
- && $fullname ne "security/capability.o"
- && $fullname ne "sound/core/wrappers.o"
- && $fullname ne "fs/ntfs/sysctl.o"
- && $fullname ne "fs/jfs/jfs_debug.o"
- ) {
- printf "No nm data for $fullname\n";
- }
- return;
+ printf "No nm data for $fullname\n"
+ unless $nmexception{$fullname};
+ return;
}
$nmdata{$fullname} = \@nmdata;
}
@@ -319,18 +363,14 @@ sub list_multiply_defined
foreach my $name (keys(%def)) {
if ($#{$def{$name}} > 0) {
# Special case for cond_syscall
- if ($#{$def{$name}} == 1 && $name =~ /^sys_/ &&
- ($def{$name}[0] eq "kernel/sys.o" ||
- $def{$name}[1] eq "kernel/sys.o")) {
- &drop_def("kernel/sys.o", $name);
- next;
- }
- # Special case for i386 entry code
- if ($#{$def{$name}} == 1 && $name =~ /^__kernel_/ &&
- $def{$name}[0] eq "arch/x86/kernel/vsyscall-int80_32.o" &&
- $def{$name}[1] eq "arch/x86/kernel/vsyscall-sysenter_32.o") {
- &drop_def("arch/x86/kernel/vsyscall-sysenter_32.o", $name);
- next;
+ if ($#{$def{$name}} == 1 &&
+ ($name =~ /^sys_/ || $name =~ /^compat_sys_/ ||
+ $name =~ /^sys32_/)) {
+ if($def{$name}[0] eq "kernel/sys_ni.o" ||
+ $def{$name}[1] eq "kernel/sys_ni.o") {
+ &drop_def("kernel/sys_ni.o", $name);
+ next;
+ }
}
printf "$name is multiply defined in :-\n";
@@ -372,31 +412,7 @@ sub resolve_external_references
$ref{$name} = ""
}
}
- elsif ( $name ne "mod_use_count_"
- && $name ne "__initramfs_end"
- && $name ne "__initramfs_start"
- && $name ne "_einittext"
- && $name ne "_sinittext"
- && $name ne "kallsyms_names"
- && $name ne "kallsyms_num_syms"
- && $name ne "kallsyms_addresses"
- && $name ne "__this_module"
- && $name ne "_etext"
- && $name ne "_edata"
- && $name ne "_end"
- && $name ne "__bss_start"
- && $name ne "_text"
- && $name ne "_stext"
- && $name ne "__gp"
- && $name ne "ia64_unw_start"
- && $name ne "ia64_unw_end"
- && $name ne "__init_begin"
- && $name ne "__init_end"
- && $name ne "__bss_stop"
- && $name ne "__nosave_begin"
- && $name ne "__nosave_end"
- && $name ne "pg0"
- && $name ne "__module_text_address"
+ elsif ( ! $nameexception{$name}
&& $name !~ /^__sched_text_/
&& $name !~ /^__start_/
&& $name !~ /^__end_/
@@ -407,7 +423,6 @@ sub resolve_external_references
&& $name !~ /^__.*per_cpu_end/
&& $name !~ /^__alt_instructions/
&& $name !~ /^__setup_/
- && $name !~ /^jiffies/
&& $name !~ /^__mod_timer/
&& $name !~ /^__mod_page_state/
&& $name !~ /^init_module/