summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/input/pwm-vibrator.txt66
-rw-r--r--drivers/input/joystick/adi.c2
-rw-r--r--drivers/input/joystick/xpad.c10
-rw-r--r--drivers/input/misc/Kconfig12
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/pwm-vibra.c267
-rw-r--r--drivers/input/mouse/elantech.c8
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h7
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c3
-rw-r--r--drivers/input/touchscreen/goodix.c9
-rw-r--r--drivers/input/touchscreen/surface3_spi.c2
-rw-r--r--drivers/input/touchscreen/ucb1400_ts.c4
12 files changed, 380 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
new file mode 100644
index 000000000000..09145d18491d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
@@ -0,0 +1,66 @@
+* PWM vibrator device tree bindings
+
+Registers a PWM device as vibrator. It is expected, that the vibrator's
+strength increases based on the duty cycle of the enable PWM channel
+(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+The binding supports an optional direction PWM channel, that can be
+driven at fixed duty cycle. If available this is can be used to increase
+the vibration effect of some devices.
+
+Required properties:
+- compatible: should contain "pwm-vibrator"
+- pwm-names: Should contain "enable" and optionally "direction"
+- pwms: Should contain a PWM handle for each entry in pwm-names
+
+Optional properties:
+- vcc-supply: Phandle for the regulator supplying power
+- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
+ nanoseconds, defaults to 50% of the channel's
+ period.
+
+Example from Motorola Droid 4:
+
+&omap4_pmx_core {
+ vibrator_direction_pin: pinmux_vibrator_direction_pin {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
+ >;
+ };
+
+ vibrator_enable_pin: pinmux_vibrator_enable_pin {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
+ >;
+ };
+};
+
+/ {
+ pwm8: dmtimer-pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_direction_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer8>;
+ ti,clock-source = <0x01>;
+ };
+
+ pwm9: dmtimer-pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_enable_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x01>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm8 0 1000000000 0>,
+ <&pwm9 0 1000000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <1000000000>;
+ };
+};
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index d09cefa37931..15a71acb6997 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -313,7 +313,7 @@ static void adi_close(struct input_dev *dev)
static void adi_init_digital(struct gameport *gameport)
{
- int seq[] = { 4, -2, -3, 10, -6, -11, -7, -9, 11, 0 };
+ static const int seq[] = { 4, -2, -3, 10, -6, -11, -7, -9, 11, 0 };
int i;
for (i = 0; seq[i]; i++) {
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index f8e34ef643c7..d86e59515b9c 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -1764,10 +1764,12 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
struct usb_endpoint_descriptor *ep =
&intf->cur_altsetting->endpoint[i].desc;
- if (usb_endpoint_dir_in(ep))
- ep_irq_in = ep;
- else
- ep_irq_out = ep;
+ if (usb_endpoint_xfer_int(ep)) {
+ if (usb_endpoint_dir_in(ep))
+ ep_irq_in = ep;
+ else
+ ep_irq_out = ep;
+ }
}
if (!ep_irq_in || !ep_irq_out) {
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f47e836eaa0f..9f082a388388 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -581,6 +581,18 @@ config INPUT_PWM_BEEPER
To compile this driver as a module, choose M here: the module will be
called pwm-beeper.
+config INPUT_PWM_VIBRA
+ tristate "PWM vibrator support"
+ depends on PWM
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here to get support for PWM based vibrator devices.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pwm-vibra.
+
config INPUT_RK805_PWRKEY
tristate "Rockchip RK805 PMIC power key support"
depends on MFD_RK808
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1072e0760c19..03fd4262ada9 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o
obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
+obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
new file mode 100644
index 000000000000..55da191ae550
--- /dev/null
+++ b/drivers/input/misc/pwm-vibra.c
@@ -0,0 +1,267 @@
+/*
+ * PWM vibrator driver
+ *
+ * Copyright (C) 2017 Collabora Ltd.
+ *
+ * Based on previous work from:
+ * Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com>
+ *
+ * Based on PWM beeper driver:
+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/pwm.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+struct pwm_vibrator {
+ struct input_dev *input;
+ struct pwm_device *pwm;
+ struct pwm_device *pwm_dir;
+ struct regulator *vcc;
+
+ struct work_struct play_work;
+ u16 level;
+ u32 direction_duty_cycle;
+};
+
+static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
+{
+ struct device *pdev = vibrator->input->dev.parent;
+ struct pwm_state state;
+ int err;
+
+ err = regulator_enable(vibrator->vcc);
+ if (err) {
+ dev_err(pdev, "failed to enable regulator: %d", err);
+ return err;
+ }
+
+ pwm_get_state(vibrator->pwm, &state);
+ pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
+ state.enabled = true;
+
+ err = pwm_apply_state(vibrator->pwm, &state);
+ if (err) {
+ dev_err(pdev, "failed to apply pwm state: %d", err);
+ return err;
+ }
+
+ if (vibrator->pwm_dir) {
+ pwm_get_state(vibrator->pwm_dir, &state);
+ state.duty_cycle = vibrator->direction_duty_cycle;
+ state.enabled = true;
+
+ err = pwm_apply_state(vibrator->pwm_dir, &state);
+ if (err) {
+ dev_err(pdev, "failed to apply dir-pwm state: %d", err);
+ pwm_disable(vibrator->pwm);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
+{
+ regulator_disable(vibrator->vcc);
+
+ if (vibrator->pwm_dir)
+ pwm_disable(vibrator->pwm_dir);
+ pwm_disable(vibrator->pwm);
+}
+
+static void pwm_vibrator_play_work(struct work_struct *work)
+{
+ struct pwm_vibrator *vibrator = container_of(work,
+ struct pwm_vibrator, play_work);
+
+ if (vibrator->level)
+ pwm_vibrator_start(vibrator);
+ else
+ pwm_vibrator_stop(vibrator);
+}
+
+static int pwm_vibrator_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct pwm_vibrator *vibrator = input_get_drvdata(dev);
+
+ vibrator->level = effect->u.rumble.strong_magnitude;
+ if (!vibrator->level)
+ vibrator->level = effect->u.rumble.weak_magnitude;
+
+ schedule_work(&vibrator->play_work);
+
+ return 0;
+}
+
+static void pwm_vibrator_close(struct input_dev *input)
+{
+ struct pwm_vibrator *vibrator = input_get_drvdata(input);
+
+ cancel_work_sync(&vibrator->play_work);
+ pwm_vibrator_stop(vibrator);
+}
+
+static int pwm_vibrator_probe(struct platform_device *pdev)
+{
+ struct pwm_vibrator *vibrator;
+ struct pwm_state state;
+ int err;
+
+ vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
+ if (!vibrator)
+ return -ENOMEM;
+
+ vibrator->input = devm_input_allocate_device(&pdev->dev);
+ if (!vibrator->input)
+ return -ENOMEM;
+
+ vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
+ err = PTR_ERR_OR_ZERO(vibrator->vcc);
+ if (err) {
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to request regulator: %d",
+ err);
+ return err;
+ }
+
+ vibrator->pwm = devm_pwm_get(&pdev->dev, "enable");
+ err = PTR_ERR_OR_ZERO(vibrator->pwm);
+ if (err) {
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to request main pwm: %d",
+ err);
+ return err;
+ }
+
+ INIT_WORK(&vibrator->play_work, pwm_vibrator_play_work);
+
+ /* Sync up PWM state and ensure it is off. */
+ pwm_init_state(vibrator->pwm, &state);
+ state.enabled = false;
+ err = pwm_apply_state(vibrator->pwm, &state);
+ if (err) {
+ dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
+ err);
+ return err;
+ }
+
+ vibrator->pwm_dir = devm_pwm_get(&pdev->dev, "direction");
+ err = PTR_ERR_OR_ZERO(vibrator->pwm_dir);
+ switch (err) {
+ case 0:
+ /* Sync up PWM state and ensure it is off. */
+ pwm_init_state(vibrator->pwm_dir, &state);
+ state.enabled = false;
+ err = pwm_apply_state(vibrator->pwm_dir, &state);
+ if (err) {
+ dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
+ err);
+ return err;
+ }
+
+ vibrator->direction_duty_cycle =
+ pwm_get_period(vibrator->pwm_dir) / 2;
+ device_property_read_u32(&pdev->dev, "direction-duty-cycle-ns",
+ &vibrator->direction_duty_cycle);
+ break;
+
+ case -ENODATA:
+ /* Direction PWM is optional */
+ vibrator->pwm_dir = NULL;
+ break;
+
+ default:
+ dev_err(&pdev->dev, "Failed to request direction pwm: %d", err);
+ /* Fall through */
+
+ case -EPROBE_DEFER:
+ return err;
+ }
+
+ vibrator->input->name = "pwm-vibrator";
+ vibrator->input->id.bustype = BUS_HOST;
+ vibrator->input->dev.parent = &pdev->dev;
+ vibrator->input->close = pwm_vibrator_close;
+
+ input_set_drvdata(vibrator->input, vibrator);
+ input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
+
+ err = input_ff_create_memless(vibrator->input, NULL,
+ pwm_vibrator_play_effect);
+ if (err) {
+ dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
+ return err;
+ }
+
+ err = input_register_device(vibrator->input);
+ if (err) {
+ dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, vibrator);
+
+ return 0;
+}
+
+static int __maybe_unused pwm_vibrator_suspend(struct device *dev)
+{
+ struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
+
+ cancel_work_sync(&vibrator->play_work);
+ if (vibrator->level)
+ pwm_vibrator_stop(vibrator);
+
+ return 0;
+}
+
+static int __maybe_unused pwm_vibrator_resume(struct device *dev)
+{
+ struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
+
+ if (vibrator->level)
+ pwm_vibrator_start(vibrator);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pwm_vibrator_pm_ops,
+ pwm_vibrator_suspend, pwm_vibrator_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pwm_vibra_dt_match_table[] = {
+ { .compatible = "pwm-vibrator" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pwm_vibra_dt_match_table);
+#endif
+
+static struct platform_driver pwm_vibrator_driver = {
+ .probe = pwm_vibrator_probe,
+ .driver = {
+ .name = "pwm-vibrator",
+ .pm = &pwm_vibrator_pm_ops,
+ .of_match_table = of_match_ptr(pwm_vibra_dt_match_table),
+ },
+};
+module_platform_driver(pwm_vibrator_driver);
+
+MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
+MODULE_DESCRIPTION("PWM vibrator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pwm-vibrator");
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 6428d6f4d568..b84cd978fce2 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -700,7 +700,9 @@ static int elantech_debounce_check_v2(struct psmouse *psmouse)
* When we encounter packet that matches this exactly, it means the
* hardware is in debounce status. Just ignore the whole packet.
*/
- const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff };
+ static const u8 debounce_packet[] = {
+ 0x84, 0xff, 0xff, 0x02, 0xff, 0xff
+ };
unsigned char *packet = psmouse->packet;
return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
@@ -741,7 +743,9 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
static int elantech_packet_check_v3(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
- const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff };
+ static const u8 debounce_packet[] = {
+ 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff
+ };
unsigned char *packet = psmouse->packet;
/*
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index ae81e57e13b9..6cbbdc6e9687 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -840,6 +840,13 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = {
},
},
{
+ /* Gigabyte P57 - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P57"),
+ },
+ },
+ {
/* Schenker XMG C504 - Elantech touchpad */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "XMG"),
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index f872817e81e4..5bf63f76ddda 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -593,7 +593,7 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
tsdata->gain);
edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
tsdata->offset);
- if (reg_addr->reg_report_rate)
+ if (reg_addr->reg_report_rate != NO_REGISTER)
edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
tsdata->report_rate);
@@ -874,6 +874,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
case M09:
reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
+ reg_addr->reg_report_rate = NO_REGISTER;
reg_addr->reg_gain = M09_REGISTER_GAIN;
reg_addr->reg_offset = M09_REGISTER_OFFSET;
reg_addr->reg_num_x = M09_REGISTER_NUM_X;
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 240b16f3ee97..32d2762448aa 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -267,6 +267,12 @@ static void goodix_process_events(struct goodix_ts_data *ts)
if (touch_num < 0)
return;
+ /*
+ * Bit 4 of the first byte reports the status of the capacitive
+ * Windows/Home button.
+ */
+ input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4));
+
for (i = 0; i < touch_num; i++)
goodix_ts_report_touch(ts,
&point_data[1 + GOODIX_CONTACT_SIZE * i]);
@@ -612,6 +618,9 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
ts->input_dev->id.product = ts->id;
ts->input_dev->id.version = ts->version;
+ /* Capacitive Windows/Home button on some devices */
+ input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA);
+
error = input_register_device(ts->input_dev);
if (error) {
dev_err(&ts->client->dev,
diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c
index e12fb9b63f31..5db0f1c4ef38 100644
--- a/drivers/input/touchscreen/surface3_spi.c
+++ b/drivers/input/touchscreen/surface3_spi.c
@@ -173,7 +173,7 @@ static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data)
static void surface3_spi_process(struct surface3_ts_data *ts_data)
{
- const char header[] = {
+ static const char header[] = {
0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01
};
u8 *data = ts_data->rd_buf;
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index c1e23cfc6155..1a86cbd9326f 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -414,7 +414,7 @@ static int __maybe_unused ucb1400_ts_suspend(struct device *dev)
mutex_lock(&idev->mutex);
if (idev->users)
- ucb1400_ts_start(ucb);
+ ucb1400_ts_stop(ucb);
mutex_unlock(&idev->mutex);
return 0;
@@ -428,7 +428,7 @@ static int __maybe_unused ucb1400_ts_resume(struct device *dev)
mutex_lock(&idev->mutex);
if (idev->users)
- ucb1400_ts_stop(ucb);
+ ucb1400_ts_start(ucb);
mutex_unlock(&idev->mutex);
return 0;