summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/filesystems/sysfs-pci.txt21
-rw-r--r--Documentation/pci-error-recovery.txt246
-rw-r--r--MAINTAINERS7
-rw-r--r--arch/alpha/kernel/sys_alcor.c3
-rw-r--r--arch/alpha/kernel/sys_sio.c6
-rw-r--r--arch/frv/mb93090-mb00/pci-frv.c8
-rw-r--r--arch/frv/mb93090-mb00/pci-irq.c4
-rw-r--r--arch/i386/kernel/scx200.c2
-rw-r--r--arch/i386/pci/acpi.c2
-rw-r--r--arch/i386/pci/fixup.c7
-rw-r--r--arch/i386/pci/irq.c42
-rw-r--r--arch/mips/vr41xx/common/vrc4173.c2
-rw-r--r--arch/ppc/kernel/pci.c21
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_cds_common.c11
-rw-r--r--arch/sparc64/kernel/ebus.c15
-rw-r--r--drivers/acpi/pci_irq.c7
-rw-r--r--drivers/block/DAC960.c2
-rw-r--r--drivers/block/cciss.c2
-rw-r--r--drivers/block/sx8.c2
-rw-r--r--drivers/block/umem.c2
-rw-r--r--drivers/hwmon/vt8231.c2
-rw-r--r--drivers/media/radio/radio-gemtek-pci.c2
-rw-r--r--drivers/media/radio/radio-maxiradio.c2
-rw-r--r--drivers/parport/parport_serial.c2
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c6
-rw-r--r--drivers/pci/hotplug/cpqphp.h8
-rw-r--r--drivers/pci/hotplug/cpqphp_core.c127
-rw-r--r--drivers/pci/hotplug/cpqphp_ctrl.c28
-rw-r--r--drivers/pci/hotplug/cpqphp_sysfs.c138
-rw-r--r--drivers/pci/hotplug/ibmphp_pci.c2
-rw-r--r--drivers/pci/hotplug/pciehp_core.c92
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c19
-rw-r--r--drivers/pci/hotplug/pciehp_pci.c52
-rw-r--r--drivers/pci/hotplug/pciehprm_acpi.c13
-rw-r--r--drivers/pci/hotplug/rpadlpar_core.c27
-rw-r--r--drivers/pci/hotplug/rpaphp_pci.c47
-rw-r--r--drivers/pci/hotplug/shpchp.h4
-rw-r--r--drivers/pci/hotplug/shpchp_core.c16
-rw-r--r--drivers/pci/hotplug/shpchp_ctrl.c37
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c138
-rw-r--r--drivers/pci/hotplug/shpchp_pci.c19
-rw-r--r--drivers/pci/pci.c7
-rw-r--r--drivers/pci/pci.h5
-rw-r--r--drivers/pci/pcie/portdrv_core.c4
-rw-r--r--drivers/pci/probe.c49
-rw-r--r--drivers/pci/proc.c3
-rw-r--r--drivers/pci/quirks.c26
-rw-r--r--drivers/pci/remove.c3
-rw-r--r--drivers/pcmcia/vrc4173_cardu.c2
-rw-r--r--drivers/serial/serial_txx9.c2
-rw-r--r--drivers/video/cyblafb.c1
-rw-r--r--include/linux/pci.h69
-rw-r--r--sound/oss/ad1889.c2
-rw-r--r--sound/oss/btaudio.c2
-rw-r--r--sound/oss/cmpci.c2
-rw-r--r--sound/oss/cs4281/cs4281m.c2
-rw-r--r--sound/oss/cs46xx.c2
-rw-r--r--sound/oss/emu10k1/main.c2
-rw-r--r--sound/oss/es1370.c2
-rw-r--r--sound/oss/es1371.c2
-rw-r--r--sound/oss/ite8172.c2
-rw-r--r--sound/oss/kahlua.c2
-rw-r--r--sound/oss/maestro.c2
-rw-r--r--sound/oss/nec_vrc5477.c2
-rw-r--r--sound/oss/nm256_audio.c2
-rw-r--r--sound/oss/rme96xx.c2
-rw-r--r--sound/oss/sonicvibes.c2
-rw-r--r--sound/oss/ymfpci.c2
68 files changed, 954 insertions, 442 deletions
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 988a62fae11f..7ba2baa165ff 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -1,4 +1,5 @@
Accessing PCI device resources through sysfs
+--------------------------------------------
sysfs, usually mounted at /sys, provides access to PCI resources on platforms
that support it. For example, a given bus might look like this:
@@ -47,14 +48,21 @@ files, each with their own function.
binary - file contains binary data
cpumask - file contains a cpumask type
-The read only files are informational, writes to them will be ignored.
-Writable files can be used to perform actions on the device (e.g. changing
-config space, detaching a device). mmapable files are available via an
-mmap of the file at offset 0 and can be used to do actual device programming
-from userspace. Note that some platforms don't support mmapping of certain
-resources, so be sure to check the return value from any attempted mmap.
+The read only files are informational, writes to them will be ignored, with
+the exception of the 'rom' file. Writable files can be used to perform
+actions on the device (e.g. changing config space, detaching a device).
+mmapable files are available via an mmap of the file at offset 0 and can be
+used to do actual device programming from userspace. Note that some platforms
+don't support mmapping of certain resources, so be sure to check the return
+value from any attempted mmap.
+
+The 'rom' file is special in that it provides read-only access to the device's
+ROM file, if available. It's disabled by default, however, so applications
+should write the string "1" to the file to enable it before attempting a read
+call, and disable it following the access by writing "0" to the file.
Accessing legacy resources through sysfs
+----------------------------------------
Legacy I/O port and ISA memory resources are also provided in sysfs if the
underlying platform supports them. They're located in the PCI class heirarchy,
@@ -75,6 +83,7 @@ simply dereference the returned pointer (after checking for errors of course)
to access legacy memory space.
Supporting PCI access on new platforms
+--------------------------------------
In order to support PCI resource mapping as described above, Linux platform
code must define HAVE_PCI_MMAP and provide a pci_mmap_page_range function.
diff --git a/Documentation/pci-error-recovery.txt b/Documentation/pci-error-recovery.txt
new file mode 100644
index 000000000000..d089967e4948
--- /dev/null
+++ b/Documentation/pci-error-recovery.txt
@@ -0,0 +1,246 @@
+
+ PCI Error Recovery
+ ------------------
+ May 31, 2005
+
+ Current document maintainer:
+ Linas Vepstas <linas@austin.ibm.com>
+
+
+Some PCI bus controllers are able to detect certain "hard" PCI errors
+on the bus, such as parity errors on the data and address busses, as
+well as SERR and PERR errors. These chipsets are then able to disable
+I/O to/from the affected device, so that, for example, a bad DMA
+address doesn't end up corrupting system memory. These same chipsets
+are also able to reset the affected PCI device, and return it to
+working condition. This document describes a generic API form
+performing error recovery.
+
+The core idea is that after a PCI error has been detected, there must
+be a way for the kernel to coordinate with all affected device drivers
+so that the pci card can be made operational again, possibly after
+performing a full electrical #RST of the PCI card. The API below
+provides a generic API for device drivers to be notified of PCI
+errors, and to be notified of, and respond to, a reset sequence.
+
+Preliminary sketch of API, cut-n-pasted-n-modified email from
+Ben Herrenschmidt, circa 5 april 2005
+
+The error recovery API support is exposed to the driver in the form of
+a structure of function pointers pointed to by a new field in struct
+pci_driver. The absence of this pointer in pci_driver denotes an
+"non-aware" driver, behaviour on these is platform dependant.
+Platforms like ppc64 can try to simulate pci hotplug remove/add.
+
+The definition of "pci_error_token" is not covered here. It is based on
+Seto's work on the synchronous error detection. We still need to define
+functions for extracting infos out of an opaque error token. This is
+separate from this API.
+
+This structure has the form:
+
+struct pci_error_handlers
+{
+ int (*error_detected)(struct pci_dev *dev, pci_error_token error);
+ int (*mmio_enabled)(struct pci_dev *dev);
+ int (*resume)(struct pci_dev *dev);
+ int (*link_reset)(struct pci_dev *dev);
+ int (*slot_reset)(struct pci_dev *dev);
+};
+
+A driver doesn't have to implement all of these callbacks. The
+only mandatory one is error_detected(). If a callback is not
+implemented, the corresponding feature is considered unsupported.
+For example, if mmio_enabled() and resume() aren't there, then the
+driver is assumed as not doing any direct recovery and requires
+a reset. If link_reset() is not implemented, the card is assumed as
+not caring about link resets, in which case, if recover is supported,
+the core can try recover (but not slot_reset() unless it really did
+reset the slot). If slot_reset() is not supported, link_reset() can
+be called instead on a slot reset.
+
+At first, the call will always be :
+
+ 1) error_detected()
+
+ Error detected. This is sent once after an error has been detected. At
+this point, the device might not be accessible anymore depending on the
+platform (the slot will be isolated on ppc64). The driver may already
+have "noticed" the error because of a failing IO, but this is the proper
+"synchronisation point", that is, it gives a chance to the driver to
+cleanup, waiting for pending stuff (timers, whatever, etc...) to
+complete; it can take semaphores, schedule, etc... everything but touch
+the device. Within this function and after it returns, the driver
+shouldn't do any new IOs. Called in task context. This is sort of a
+"quiesce" point. See note about interrupts at the end of this doc.
+
+ Result codes:
+ - PCIERR_RESULT_CAN_RECOVER:
+ Driever returns this if it thinks it might be able to recover
+ the HW by just banging IOs or if it wants to be given
+ a chance to extract some diagnostic informations (see
+ below).
+ - PCIERR_RESULT_NEED_RESET:
+ Driver returns this if it thinks it can't recover unless the
+ slot is reset.
+ - PCIERR_RESULT_DISCONNECT:
+ Return this if driver thinks it won't recover at all,
+ (this will detach the driver ? or just leave it
+ dangling ? to be decided)
+
+So at this point, we have called error_detected() for all drivers
+on the segment that had the error. On ppc64, the slot is isolated. What
+happens now typically depends on the result from the drivers. If all
+drivers on the segment/slot return PCIERR_RESULT_CAN_RECOVER, we would
+re-enable IOs on the slot (or do nothing special if the platform doesn't
+isolate slots) and call 2). If not and we can reset slots, we go to 4),
+if neither, we have a dead slot. If it's an hotplug slot, we might
+"simulate" reset by triggering HW unplug/replug though.
+
+>>> Current ppc64 implementation assumes that a device driver will
+>>> *not* schedule or semaphore in this routine; the current ppc64
+>>> implementation uses one kernel thread to notify all devices;
+>>> thus, of one device sleeps/schedules, all devices are affected.
+>>> Doing better requires complex multi-threaded logic in the error
+>>> recovery implementation (e.g. waiting for all notification threads
+>>> to "join" before proceeding with recovery.) This seems excessively
+>>> complex and not worth implementing.
+
+>>> The current ppc64 implementation doesn't much care if the device
+>>> attempts i/o at this point, or not. I/O's will fail, returning
+>>> a value of 0xff on read, and writes will be dropped. If the device
+>>> driver attempts more than 10K I/O's to a frozen adapter, it will
+>>> assume that the device driver has gone into an infinite loop, and
+>>> it will panic the the kernel.
+
+ 2) mmio_enabled()
+
+ This is the "early recovery" call. IOs are allowed again, but DMA is
+not (hrm... to be discussed, I prefer not), with some restrictions. This
+is NOT a callback for the driver to start operations again, only to
+peek/poke at the device, extract diagnostic information, if any, and
+eventually do things like trigger a device local reset or some such,
+but not restart operations. This is sent if all drivers on a segment
+agree that they can try to recover and no automatic link reset was
+performed by the HW. If the platform can't just re-enable IOs without
+a slot reset or a link reset, it doesn't call this callback and goes
+directly to 3) or 4). All IOs should be done _synchronously_ from
+within this callback, errors triggered by them will be returned via
+the normal pci_check_whatever() api, no new error_detected() callback
+will be issued due to an error happening here. However, such an error
+might cause IOs to be re-blocked for the whole segment, and thus
+invalidate the recovery that other devices on the same segment might
+have done, forcing the whole segment into one of the next states,
+that is link reset or slot reset.
+
+ Result codes:
+ - PCIERR_RESULT_RECOVERED
+ Driver returns this if it thinks the device is fully
+ functionnal and thinks it is ready to start
+ normal driver operations again. There is no
+ guarantee that the driver will actually be
+ allowed to proceed, as another driver on the
+ same segment might have failed and thus triggered a
+ slot reset on platforms that support it.
+
+ - PCIERR_RESULT_NEED_RESET
+ Driver returns this if it thinks the device is not
+ recoverable in it's current state and it needs a slot
+ reset to proceed.
+
+ - PCIERR_RESULT_DISCONNECT
+ Same as above. Total failure, no recovery even after
+ reset driver dead. (To be defined more precisely)
+
+>>> The current ppc64 implementation does not implement this callback.
+
+ 3) link_reset()
+
+ This is called after the link has been reset. This is typically
+a PCI Express specific state at this point and is done whenever a
+non-fatal error has been detected that can be "solved" by resetting
+the link. This call informs the driver of the reset and the driver
+should check if the device appears to be in working condition.
+This function acts a bit like 2) mmio_enabled(), in that the driver
+is not supposed to restart normal driver I/O operations right away.
+Instead, it should just "probe" the device to check it's recoverability
+status. If all is right, then the core will call resume() once all
+drivers have ack'd link_reset().
+
+ Result codes:
+ (identical to mmio_enabled)
+
+>>> The current ppc64 implementation does not implement this callback.
+
+ 4) slot_reset()
+
+ This is called after the slot has been soft or hard reset by the
+platform. A soft reset consists of asserting the adapter #RST line
+and then restoring the PCI BARs and PCI configuration header. If the
+platform supports PCI hotplug, then it might instead perform a hard
+reset by toggling power on the slot off/on. This call gives drivers
+the chance to re-initialize the hardware (re-download firmware, etc.),
+but drivers shouldn't restart normal I/O processing operations at
+this point. (See note about interrupts; interrupts aren't guaranteed
+to be delivered until the resume() callback has been called). If all
+device drivers report success on this callback, the patform will call
+resume() to complete the error handling and let the driver restart
+normal I/O processing.
+
+A driver can still return a critical failure for this function if
+it can't get the device operational after reset. If the platform
+previously tried a soft reset, it migh now try a hard reset (power
+cycle) and then call slot_reset() again. It the device still can't
+be recovered, there is nothing more that can be done; the platform
+will typically report a "permanent failure" in such a case. The
+device will be considered "dead" in this case.
+
+ Result codes:
+ - PCIERR_RESULT_DISCONNECT
+ Same as above.
+
+>>> The current ppc64 implementation does not try a power-cycle reset
+>>> if the driver returned PCIERR_RESULT_DISCONNECT. However, it should.
+
+ 5) resume()
+
+ This is called if all drivers on the segment have returned
+PCIERR_RESULT_RECOVERED from one of the 3 prevous callbacks.
+That basically tells the driver to restart activity, tht everything
+is back and running. No result code is taken into account here. If
+a new error happens, it will restart a new error handling process.
+
+That's it. I think this covers all the possibilities. The way those
+callbacks are called is platform policy. A platform with no slot reset
+capability for example may want to just "ignore" drivers that can't
+recover (disconnect them) and try to let other cards on the same segment
+recover. Keep in mind that in most real life cases, though, there will
+be only one driver per segment.
+
+Now, there is a note about interrupts. If you get an interrupt and your
+device is dead or has been isolated, there is a problem :)
+
+After much thinking, I decided to leave that to the platform. That is,
+the recovery API only precies that:
+
+ - There is no guarantee that interrupt delivery can proceed from any
+device on the segment starting from the error detection and until the
+restart callback is sent, at which point interrupts are expected to be
+fully operational.
+
+ - There is no guarantee that interrupt delivery is stopped, that is, ad
+river that gets an interrupts after detecting an error, or that detects
+and error within the interrupt handler such that it prevents proper
+ack'ing of the interrupt (and thus removal of the source) should just
+return IRQ_NOTHANDLED. It's up to the platform to deal with taht
+condition, typically by masking the irq source during the duration of
+the error handling. It is expected that the platform "knows" which
+interrupts are routed to error-management capable slots and can deal
+with temporarily disabling that irq number during error processing (this
+isn't terribly complex). That means some IRQ latency for other devices
+sharing the interrupt, but there is simply no other way. High end
+platforms aren't supposed to share interrupts between many devices
+anyway :)
+
+
+Revised: 31 May 2005 Linas Vepstas <linas@austin.ibm.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 9b788d779472..07420161e669 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1987,6 +1987,13 @@ M: hch@infradead.org
L: linux-abi-devel@lists.sourceforge.net
S: Maintained
+PCI ERROR RECOVERY
+P: Linas Vepstas
+M: linas@austin.ibm.com
+L: linux-kernel@vger.kernel.org
+L: linux-pci@atrey.karlin.mff.cuni.cz
+S: Supported
+
PCI SOUND DRIVERS (ES1370, ES1371 and SONICVIBES)
P: Thomas Sailer
M: sailer@ife.ee.ethz.ch
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
index 145dcde143ae..d7f0e97fe56f 100644
--- a/arch/alpha/kernel/sys_alcor.c
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -254,7 +254,7 @@ alcor_init_pci(void)
* motherboard, by looking for a 21040 TULIP in slot 6, which is
* built into XLT and BRET/MAVERICK, but not available on ALCOR.
*/
- dev = pci_find_device(PCI_VENDOR_ID_DEC,
+ dev = pci_get_device(PCI_VENDOR_ID_DEC,
PCI_DEVICE_ID_DEC_TULIP,
NULL);
if (dev && dev->devfn == PCI_DEVFN(6,0)) {
@@ -262,6 +262,7 @@ alcor_init_pci(void)
printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n",
__FUNCTION__);
}
+ pci_dev_put(dev);
}
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index 47df48a6ddb7..131a2d9f79d3 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -105,7 +105,7 @@ sio_collect_irq_levels(void)
struct pci_dev *dev = NULL;
/* Iterate through the devices, collecting IRQ levels. */
- while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ for_each_pci_dev(dev) {
if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
(dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
continue;
@@ -229,8 +229,8 @@ alphabook1_init_pci(void)
*/
dev = NULL;
- while ((dev = pci_find_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
- if (dev->device == PCI_DEVICE_ID_NCR_53C810
+ while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
+ if (dev->device == PCI_DEVICE_ID_NCR_53C810
|| dev->device == PCI_DEVICE_ID_NCR_53C815
|| dev->device == PCI_DEVICE_ID_NCR_53C820
|| dev->device == PCI_DEVICE_ID_NCR_53C825) {
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 83e5489cf039..0a26bf6f1cd4 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -142,9 +142,7 @@ static void __init pcibios_allocate_resources(int pass)
u16 command;
struct resource *r, *pr;
- while (dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev),
- dev != NULL
- ) {
+ for_each_pci_dev(dev) {
pci_read_config_word(dev, PCI_COMMAND, &command);
for(idx = 0; idx < 6; idx++) {
r = &dev->resource[idx];
@@ -188,9 +186,7 @@ static void __init pcibios_assign_resources(void)
int idx;
struct resource *r;
- while (dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev),
- dev != NULL
- ) {
+ for_each_pci_dev(dev) {
int class = dev->class >> 8;
/* Don't touch classless devices and host bridges */
diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
index 24622d89b1ca..c4a1144c98b0 100644
--- a/arch/frv/mb93090-mb00/pci-irq.c
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -48,9 +48,7 @@ void __init pcibios_fixup_irqs(void)
struct pci_dev *dev = NULL;
uint8_t line, pin;
- while (dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev),
- dev != NULL
- ) {
+ for_each_pci_dev(dev) {
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (pin) {
dev->irq = pci_bus0_irq_routing[PCI_SLOT(dev->devfn)][pin - 1];
diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c
index 9c968ae67c43..321f5fd26e75 100644
--- a/arch/i386/kernel/scx200.c
+++ b/arch/i386/kernel/scx200.c
@@ -143,7 +143,7 @@ static int __init scx200_init(void)
{
printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
- return pci_module_init(&scx200_pci_driver);
+ return pci_register_driver(&scx200_pci_driver);
}
static void __exit scx200_cleanup(void)
diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c
index 4c4522b43be5..b33aea845f58 100644
--- a/arch/i386/pci/acpi.c
+++ b/arch/i386/pci/acpi.c
@@ -53,7 +53,7 @@ static int __init pci_acpi_init(void)
* don't use pci_enable_device().
*/
printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
+ for_each_pci_dev(dev)
acpi_pci_irq_enable(dev);
} else
printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\". If it helps, post a report\n");
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index eeb1b1f2d548..65f67070db64 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -413,6 +413,13 @@ static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
},
},
+ {
+ .ident = "Toshiba A40 based laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"),
+ },
+ },
{ }
};
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index ee8e01697d96..e715aa930036 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -78,7 +78,7 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
for (i=0; i < rt->size; i++)
sum += addr[i];
if (!sum) {
- DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+ DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
return rt;
}
return NULL;
@@ -128,7 +128,7 @@ static void __init pirq_peer_trick(void)
#ifdef DEBUG
{
int j;
- DBG("%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
+ DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
for(j=0; j<4; j++)
DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
DBG("\n");
@@ -160,10 +160,10 @@ void eisa_set_level_irq(unsigned int irq)
return;
eisa_irq_mask |= (1 << irq);
- printk("PCI: setting IRQ %u as level-triggered\n", irq);
+ printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
val = inb(port);
if (!(val & mask)) {
- DBG(" -> edge");
+ DBG(KERN_DEBUG " -> edge");
outb(val | mask, port);
}
}
@@ -677,11 +677,11 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
{
case PCI_DEVICE_ID_AL_M1533:
case PCI_DEVICE_ID_AL_M1563:
- printk("PCI: Using ALI IRQ Router\n");
- r->name = "ALI";
- r->get = pirq_ali_get;
- r->set = pirq_ali_set;
- return 1;
+ printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
+ r->name = "ALI";
+ r->get = pirq_ali_get;
+ r->set = pirq_ali_set;
+ return 1;
}
return 0;
}
@@ -749,12 +749,13 @@ static void __init pirq_find_router(struct irq_router *r)
r->get = NULL;
r->set = NULL;
- DBG("PCI: Attempting to find IRQ router for %04x:%04x\n",
+ DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
rt->rtr_vendor, rt->rtr_device);
pirq_router_dev = pci_find_slot(rt->rtr_bus, rt->rtr_devfn);
if (!pirq_router_dev) {
- DBG("PCI: Interrupt router not found at %02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
+ DBG(KERN_DEBUG "PCI: Interrupt router not found at "
+ "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
return;
}
@@ -799,7 +800,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
/* Find IRQ pin */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin) {
- DBG(" -> no interrupt pin\n");
+ DBG(KERN_DEBUG " -> no interrupt pin\n");
return 0;
}
pin = pin - 1;
@@ -809,16 +810,16 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
if (!pirq_table)
return 0;
- DBG("IRQ for %s[%c]", pci_name(dev), 'A' + pin);
+ DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
info = pirq_get_info(dev);
if (!info) {
- DBG(" -> not found in routing table\n");
+ DBG(" -> not found in routing table\n" KERN_DEBUG);
return 0;
}
pirq = info->irq[pin].link;
mask = info->irq[pin].bitmap;
if (!pirq) {
- DBG(" -> not routed\n");
+ DBG(" -> not routed\n" KERN_DEBUG);
return 0;
}
DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
@@ -848,7 +849,10 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
newirq = dev->irq;
if (newirq && !((1 << newirq) & mask)) {
if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
- else printk(KERN_WARNING "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n", newirq, pci_name(dev));
+ else printk("\n" KERN_WARNING
+ "PCI: IRQ %i for device %s doesn't match PIRQ mask "
+ "- try pci=usepirqmask\n" KERN_DEBUG, newirq,
+ pci_name(dev));
}
if (!newirq && assign) {
for (i = 0; i < 16; i++) {
@@ -923,14 +927,14 @@ static void __init pcibios_fixup_irqs(void)
struct pci_dev *dev = NULL;
u8 pin;
- DBG("PCI: IRQ fixup\n");
+ DBG(KERN_DEBUG "PCI: IRQ fixup\n");
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
/*
* If the BIOS has set an out of range IRQ number, just ignore it.
* Also keep track of which IRQ's are already in use.
*/
if (dev->irq >= 16) {
- DBG("%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+ DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
dev->irq = 0;
}
/* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
@@ -1039,7 +1043,7 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
static int __init pcibios_irq_init(void)
{
- DBG("PCI: IRQ init\n");
+ DBG(KERN_DEBUG "PCI: IRQ init\n");
if (pcibios_enable_irq || raw_pci_ops == NULL)
return 0;
diff --git a/arch/mips/vr41xx/common/vrc4173.c b/arch/mips/vr41xx/common/vrc4173.c
index 462a9af30eef..cc52e75e14e7 100644
--- a/arch/mips/vr41xx/common/vrc4173.c
+++ b/arch/mips/vr41xx/common/vrc4173.c
@@ -561,7 +561,7 @@ static int __devinit vrc4173_init(void)
{
int err;
- err = pci_module_init(&vrc4173_driver);
+ err = pci_register_driver(&vrc4173_driver);
if (err < 0)
return err;
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 50c75eec8874..704c846b2b0f 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -503,7 +503,7 @@ pcibios_allocate_resources(int pass)
u16 command;
struct resource *r;
- while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ for_each_pci_dev(dev) {
pci_read_config_word(dev, PCI_COMMAND, &command);
for (idx = 0; idx < 6; idx++) {
r = &dev->resource[idx];
@@ -540,7 +540,7 @@ pcibios_assign_resources(void)
int idx;
struct resource *r;
- while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ for_each_pci_dev(dev) {
int class = dev->class >> 8;
/* Don't touch classless devices and host bridges */
@@ -867,14 +867,15 @@ pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
*/
if (!pci_to_OF_bus_map)
return 0;
- while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- if (pci_to_OF_bus_map[dev->bus->number] != *bus)
- continue;
- if (dev->devfn != *devfn)
- continue;
- *bus = dev->bus->number;
- return 0;
- }
+
+ for_each_pci_dev(dev)
+ if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
+ dev->devfn == *devfn) {
+ *bus = dev->bus->number;
+ pci_dev_put(dev);
+ return 0;
+ }
+
return -ENODEV;
}
EXPORT_SYMBOL(pci_device_from_OF_node);
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index 5e8cc5ec6ab5..2959e3c4083d 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -351,10 +351,10 @@ mpc85xx_cds_fixup_via(struct pci_controller *hose)
void __init
mpc85xx_cds_pcibios_fixup(void)
{
- struct pci_dev *dev = NULL;
+ struct pci_dev *dev;
u_char c;
- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
/*
* U-Boot does not set the enable bits
@@ -371,21 +371,24 @@ mpc85xx_cds_pcibios_fixup(void)
*/
dev->irq = 14;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ pci_dev_put(dev);
}
/*
* Force legacy USB interrupt routing
*/
- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
dev->irq = 10;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+ pci_dev_put(dev);
}
- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_2, dev))) {
dev->irq = 11;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+ pci_dev_put(dev);
}
}
#endif /* CONFIG_PCI */
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index 6ffbeb701940..7991e919d8ab 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -527,18 +527,12 @@ static struct pci_dev *find_next_ebus(struct pci_dev *start, int *is_rio_p)
{
struct pci_dev *pdev = start;
- do {
- pdev = pci_find_device(PCI_VENDOR_ID_SUN, PCI_ANY_ID, pdev);
- if (pdev &&
- (pdev->device == PCI_DEVICE_ID_SUN_EBUS ||
- pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS))
+ while ((pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_ANY_ID, pdev)))
+ if (pdev->device == PCI_DEVICE_ID_SUN_EBUS ||
+ pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS)
break;
- } while (pdev != NULL);
- if (pdev && (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS))
- *is_rio_p = 1;
- else
- *is_rio_p = 0;
+ *is_rio_p = !!(pdev && (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS));
return pdev;
}
@@ -637,6 +631,7 @@ void __init ebus_init(void)
ebus->is_rio = is_rio;
++num_ebus;
}
+ pci_dev_put(pdev); /* XXX for the case, when ebusnd is 0, is it OK? */
#ifdef CONFIG_SUN_AUXIO
auxio_probe();
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 09567c2edcfb..e567c03b238e 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -361,8 +361,7 @@ acpi_pci_irq_derive(struct pci_dev *dev,
if ((bridge->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
/* PC card has the same IRQ as its cardbridge */
- pci_read_config_byte(bridge, PCI_INTERRUPT_PIN,
- &bridge_pin);
+ bridge_pin = bridge->pin;
if (!bridge_pin) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No interrupt pin configured for device %s\n",
@@ -412,7 +411,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
if (!dev)
return_VALUE(-EINVAL);
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ pin = dev->pin;
if (!pin) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No interrupt pin configured for device %s\n",
@@ -503,7 +502,7 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (!dev || !dev->bus)
return_VOID;
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ pin = dev->pin;
if (!pin)
return_VOID;
pin--;
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 4a7bb7dfce85..6ede1f352c29 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -7179,7 +7179,7 @@ static int DAC960_init_module(void)
{
int ret;
- ret = pci_module_init(&DAC960_pci_driver);
+ ret = pci_register_driver(&DAC960_pci_driver);
#ifdef DAC960_GAM_MINOR
if (!ret)
DAC960_gam_init();
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e4e9f255bd1f..12d7b9bdfa93 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3360,7 +3360,7 @@ static int __init cciss_init(void)
printk(KERN_INFO DRIVER_NAME "\n");
/* Register for our PCI devices */
- return pci_module_init(&cciss_pci_driver);
+ return pci_register_driver(&cciss_pci_driver);
}
static void __exit cciss_cleanup(void)
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index 4bdf95716e2b..2ae08b343b93 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -1755,7 +1755,7 @@ static void carm_remove_one (struct pci_dev *pdev)
static int __init carm_init(void)
{
- return pci_module_init(&carm_driver);
+ return pci_register_driver(&carm_driver);
}
static void __exit carm_exit(void)
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 15299e7a1ade..a3614e6a68d0 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -1174,7 +1174,7 @@ static int __init mm_init(void)
printk(KERN_INFO DRIVER_VERSION " : " DRIVER_DESC "\n");
- retval = pci_module_init(&mm_pci_driver);
+ retval = pci_register_driver(&mm_pci_driver);
if (retval)
return -ENOMEM;
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index d00a726d0239..3eb08f004c0f 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -841,7 +841,7 @@ static int __devinit vt8231_pci_probe(struct pci_dev *dev,
static int __init sm_vt8231_init(void)
{
- return pci_module_init(&vt8231_pci_driver);
+ return pci_register_driver(&vt8231_pci_driver);
}
static void __exit sm_vt8231_exit(void)
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index 42c8fce04aa2..69ac8aa73eba 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -395,7 +395,7 @@ static struct pci_driver gemtek_pci_driver =
static int __init gemtek_pci_init_module( void )
{
- return pci_module_init( &gemtek_pci_driver );
+ return pci_register_driver( &gemtek_pci_driver );
}
static void __exit gemtek_pci_cleanup_module( void )
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 30869308332a..c975ddd86cd5 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -338,7 +338,7 @@ static struct pci_driver maxiradio_driver = {
static int __init maxiradio_radio_init(void)
{
- return pci_module_init(&maxiradio_driver);
+ return pci_register_driver(&maxiradio_driver);
}
static void __exit maxiradio_radio_exit(void)
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index d3dad0aac7cb..76dd077e3184 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -464,7 +464,7 @@ static struct pci_driver parport_serial_pci_driver = {
static int __init parport_serial_init (void)
{
- return pci_module_init (&parport_serial_pci_driver);
+ return pci_register_driver (&parport_serial_pci_driver);
}
static void __exit parport_serial_exit (void)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 8e21f6ab89a1..509a5b3ae998 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -794,12 +794,14 @@ static int enable_device(struct acpiphp_slot *slot)
if (PCI_SLOT(dev->devfn) != slot->device)
continue;
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
- dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+ dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
max = pci_scan_bridge(bus, dev, max, pass);
+ if (pass && dev->subordinate)
+ pci_bus_size_bridges(dev->subordinate);
+ }
}
}
- pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
acpiphp_sanitize_bus(bus);
pci_enable_bridges(bus);
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 092491e25ef2..cb88404c89fe 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -317,6 +317,7 @@ struct controller {
u16 vendor_id;
struct work_struct int_task_event;
wait_queue_head_t queue; /* sleep & wake process */
+ struct dentry *dentry; /* debugfs dentry */
};
struct irq_mapping {
@@ -399,8 +400,11 @@ struct resource_lists {
#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n"
-/* sysfs functions for the hotplug controller info */
-extern void cpqhp_create_ctrl_files (struct controller *ctrl);
+/* debugfs functions for the hotplug controller info */
+extern void cpqhp_initialize_debugfs (void);
+extern void cpqhp_shutdown_debugfs (void);
+extern void cpqhp_create_debugfs_files (struct controller *ctrl);
+extern void cpqhp_remove_debugfs_files (struct controller *ctrl);
/* controller functions */
extern void cpqhp_pushbutton_thread (unsigned long event_pointer);
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 9aed8efe6a11..b3659ffccac9 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -327,7 +327,9 @@ static int ctrl_slot_setup(struct controller *ctrl,
void __iomem *smbios_start,
void __iomem *smbios_table)
{
- struct slot *new_slot;
+ struct slot *slot;
+ struct hotplug_slot *hotplug_slot;
+ struct hotplug_slot_info *hotplug_slot_info;
u8 number_of_slots;
u8 slot_device;
u8 slot_number;
@@ -345,93 +347,105 @@ static int ctrl_slot_setup(struct controller *ctrl,
slot_number = ctrl->first_slot;
while (number_of_slots) {
- new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
- if (!new_slot)
+ slot = kmalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot)
goto error;
- memset(new_slot, 0, sizeof(struct slot));
- new_slot->hotplug_slot = kmalloc(sizeof(*(new_slot->hotplug_slot)),
+ memset(slot, 0, sizeof(struct slot));
+ slot->hotplug_slot = kmalloc(sizeof(*(slot->hotplug_slot)),
GFP_KERNEL);
- if (!new_slot->hotplug_slot)
+ if (!slot->hotplug_slot)
goto error_slot;
- memset(new_slot->hotplug_slot, 0, sizeof(struct hotplug_slot));
+ hotplug_slot = slot->hotplug_slot;
+ memset(hotplug_slot, 0, sizeof(struct hotplug_slot));
- new_slot->hotplug_slot->info =
- kmalloc(sizeof(*(new_slot->hotplug_slot->info)),
+ hotplug_slot->info =
+ kmalloc(sizeof(*(hotplug_slot->info)),
GFP_KERNEL);
- if (!new_slot->hotplug_slot->info)
+ if (!hotplug_slot->info)
goto error_hpslot;
- memset(new_slot->hotplug_slot->info, 0,
+ hotplug_slot_info = hotplug_slot->info;
+ memset(hotplug_slot_info, 0,
sizeof(struct hotplug_slot_info));
- new_slot->hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
- if (!new_slot->hotplug_slot->name)
+ hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
+
+ if (!hotplug_slot->name)
goto error_info;
- new_slot->ctrl = ctrl;
- new_slot->bus = ctrl->bus;
- new_slot->device = slot_device;
- new_slot->number = slot_number;
- dbg("slot->number = %d\n",new_slot->number);
+ slot->ctrl = ctrl;
+ slot->bus = ctrl->bus;
+ slot->device = slot_device;
+ slot->number = slot_number;
+ dbg("slot->number = %d\n", slot->number);
slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
slot_entry);
- while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != new_slot->number)) {
+ while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
+ slot->number)) {
slot_entry = get_SMBIOS_entry(smbios_start,
smbios_table, 9, slot_entry);
}
- new_slot->p_sm_slot = slot_entry;
+ slot->p_sm_slot = slot_entry;
- init_timer(&new_slot->task_event);
- new_slot->task_event.expires = jiffies + 5 * HZ;
- new_slot->task_event.function = cpqhp_pushbutton_thread;
+ init_timer(&slot->task_event);
+ slot->task_event.expires = jiffies + 5 * HZ;
+ slot->task_event.function = cpqhp_pushbutton_thread;
//FIXME: these capabilities aren't used but if they are
// they need to be correctly implemented
- new_slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
- new_slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
+ slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
+ slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
- if (is_slot64bit(new_slot))
- new_slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
- if (is_slot66mhz(new_slot))
- new_slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
+ if (is_slot64bit(slot))
+ slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
+ if (is_slot66mhz(slot))
+ slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
if (ctrl->speed == PCI_SPEED_66MHz)
- new_slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
+ slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
- ctrl_slot = slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
+ ctrl_slot =
+ slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
// Check presence
- new_slot->capabilities |= ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
+ slot->capabilities |=
+ ((((~tempdword) >> 23) |
+ ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
// Check the switch state
- new_slot->capabilities |= ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
+ slot->capabilities |=
+ ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
// Check the slot enable
- new_slot->capabilities |= ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
+ slot->capabilities |=
+ ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
/* register this slot with the hotplug pci core */
- new_slot->hotplug_slot->release = &release_slot;
- new_slot->hotplug_slot->private = new_slot;
- make_slot_name(new_slot->hotplug_slot->name, SLOT_NAME_SIZE, new_slot);
- new_slot->hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
+ hotplug_slot->release = &release_slot;
+ hotplug_slot->private = slot;
+ make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot);
+ hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
- new_slot->hotplug_slot->info->power_status = get_slot_enabled(ctrl, new_slot);
- new_slot->hotplug_slot->info->attention_status = cpq_get_attention_status(ctrl, new_slot);
- new_slot->hotplug_slot->info->latch_status = cpq_get_latch_status(ctrl, new_slot);
- new_slot->hotplug_slot->info->adapter_status = get_presence_status(ctrl, new_slot);
+ hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
+ hotplug_slot_info->attention_status =
+ cpq_get_attention_status(ctrl, slot);
+ hotplug_slot_info->latch_status =
+ cpq_get_latch_status(ctrl, slot);
+ hotplug_slot_info->adapter_status =
+ get_presence_status(ctrl, slot);
- dbg ("registering bus %d, dev %d, number %d, "
+ dbg("registering bus %d, dev %d, number %d, "
"ctrl->slot_device_offset %d, slot %d\n",
- new_slot->bus, new_slot->device,
- new_slot->number, ctrl->slot_device_offset,
+ slot->bus, slot->device,
+ slot->number, ctrl->slot_device_offset,
slot_number);
- result = pci_hp_register (new_slot->hotplug_slot);
+ result = pci_hp_register(hotplug_slot);
if (result) {
- err ("pci_hp_register failed with error %d\n", result);
+ err("pci_hp_register failed with error %d\n", result);
goto error_name;
}
- new_slot->next = ctrl->slot;
- ctrl->slot = new_slot;
+ slot->next = ctrl->slot;
+ ctrl->slot = slot;
number_of_slots--;
slot_device++;
@@ -439,15 +453,14 @@ static int ctrl_slot_setup(struct controller *ctrl,
}
return 0;
-
error_name:
- kfree(new_slot->hotplug_slot->name);
+ kfree(hotplug_slot->name);
error_info:
- kfree(new_slot->hotplug_slot->info);
+ kfree(hotplug_slot_info);
error_hpslot:
- kfree(new_slot->hotplug_slot);
+ kfree(hotplug_slot);
error_slot:
- kfree(new_slot);
+ kfree(slot);
error:
return result;
}
@@ -466,6 +479,8 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
old_slot = next_slot;
}
+ cpqhp_remove_debugfs_files(ctrl);
+
//Free IRQ associated with hot plug device
free_irq(ctrl->interrupt, ctrl);
//Unmap the memory
@@ -1262,7 +1277,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
// Done with exclusive hardware access
up(&ctrl->crit_sect);
- cpqhp_create_ctrl_files(ctrl);
+ cpqhp_create_debugfs_files(ctrl);
return 0;
@@ -1502,6 +1517,7 @@ static int __init cpqhpc_init(void)
cpqhp_debug = debug;
info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
+ cpqhp_initialize_debugfs();
result = pci_register_driver(&cpqhpc_driver);
dbg("pci_register_driver = %d\n", result);
return result;
@@ -1515,6 +1531,7 @@ static void __exit cpqhpc_cleanup(void)
dbg("pci_unregister_driver\n");
pci_unregister_driver(&cpqhpc_driver);
+ cpqhp_shutdown_debugfs();
}
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 10a5a7674a8a..771ed34b1819 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -2630,29 +2630,15 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
hold_mem_node = NULL;
}
- /* If we have prefetchable memory resources copy them and
- * fill in the bridge's memory range registers. Otherwise,
- * fill in the range registers with values that disable them. */
- if (p_mem_node) {
- memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
- p_mem_node->next = NULL;
-
- /* set Pre Mem base and Limit registers */
- temp_word = p_mem_node->base >> 16;
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
-
- temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
- } else {
- temp_word = 0xFFFF;
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+ memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
+ p_mem_node->next = NULL;
- temp_word = 0x0000;
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+ /* set Pre Mem base and Limit registers */
+ temp_word = p_mem_node->base >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
- kfree(hold_p_mem_node);
- hold_p_mem_node = NULL;
- }
+ temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
/* Adjust this to compensate for extra adjustment in first loop */
irqs.barber_pole--;
diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c
index 4c11048ad51b..bbfeed767ff1 100644
--- a/drivers/pci/hotplug/cpqphp_sysfs.c
+++ b/drivers/pci/hotplug/cpqphp_sysfs.c
@@ -33,22 +33,15 @@
#include <linux/proc_fs.h>
#include <linux/workqueue.h>
#include <linux/pci.h>
+#include <linux/debugfs.h>
#include "cpqphp.h"
-
-/* A few routines that create sysfs entries for the hot plug controller */
-
-static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, char *buf)
+static int show_ctrl (struct controller *ctrl, char *buf)
{
- struct pci_dev *pci_dev;
- struct controller *ctrl;
- char * out = buf;
+ char *out = buf;
int index;
struct pci_resource *res;
- pci_dev = container_of (dev, struct pci_dev, dev);
- ctrl = pci_get_drvdata(pci_dev);
-
out += sprintf(buf, "Free resources: memory\n");
index = 11;
res = ctrl->mem_head;
@@ -80,22 +73,16 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha
return out - buf;
}
-static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL);
-static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char *buf)
+static int show_dev (struct controller *ctrl, char *buf)
{
- struct pci_dev *pci_dev;
- struct controller *ctrl;
char * out = buf;
int index;
struct pci_resource *res;
struct pci_func *new_slot;
struct slot *slot;
- pci_dev = container_of (dev, struct pci_dev, dev);
- ctrl = pci_get_drvdata(pci_dev);
-
- slot=ctrl->slot;
+ slot = ctrl->slot;
while (slot) {
new_slot = cpqhp_slot_find(slot->bus, slot->device, 0);
@@ -134,10 +121,117 @@ static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char
return out - buf;
}
-static DEVICE_ATTR (dev, S_IRUGO, show_dev, NULL);
-void cpqhp_create_ctrl_files (struct controller *ctrl)
+static int spew_debug_info(struct controller *ctrl, char *data, int size)
{
- device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl);
- device_create_file (&ctrl->pci_dev->dev, &dev_attr_dev);
+ int used;
+
+ used = size - show_ctrl(ctrl, data);
+ used = (size - used) - show_dev(ctrl, &data[used]);
+ return used;
+}
+
+struct ctrl_dbg {
+ int size;
+ char *data;
+ struct controller *ctrl;
+};
+
+#define MAX_OUTPUT (4*PAGE_SIZE)
+
+static int open(struct inode *inode, struct file *file)
+{
+ struct controller *ctrl = inode->u.generic_ip;
+ struct ctrl_dbg *dbg;
+ int retval = -ENOMEM;
+
+ lock_kernel();
+ dbg = kmalloc(sizeof(*dbg), GFP_KERNEL);
+ if (!dbg)
+ goto exit;
+ dbg->data = kmalloc(MAX_OUTPUT, GFP_KERNEL);
+ if (!dbg->data) {
+ kfree(dbg);
+ goto exit;
+ }
+ dbg->size = spew_debug_info(ctrl, dbg->data, MAX_OUTPUT);
+ file->private_data = dbg;
+ retval = 0;
+exit:
+ unlock_kernel();
+ return retval;
+}
+
+static loff_t lseek(struct file *file, loff_t off, int whence)
+{
+ struct ctrl_dbg *dbg;
+ loff_t new = -1;
+
+ lock_kernel();
+ dbg = file->private_data;
+
+ switch (whence) {
+ case 0:
+ new = off;
+ break;
+ case 1:
+ new = file->f_pos + off;
+ break;
+ }
+ if (new < 0 || new > dbg->size) {
+ unlock_kernel();
+ return -EINVAL;
+ }
+ unlock_kernel();
+ return (file->f_pos = new);
}
+
+static ssize_t read(struct file *file, char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct ctrl_dbg *dbg = file->private_data;
+ return simple_read_from_buffer(buf, nbytes, ppos, dbg->data, dbg->size);
+}
+
+static int release(struct inode *inode, struct file *file)
+{
+ struct ctrl_dbg *dbg = file->private_data;
+
+ kfree(dbg->data);
+ kfree(dbg);
+ return 0;
+}
+
+static struct file_operations debug_ops = {
+ .owner = THIS_MODULE,
+ .open = open,
+ .llseek = lseek,
+ .read = read,
+ .release = release,
+};
+
+static struct dentry *root;
+
+void cpqhp_initialize_debugfs(void)
+{
+ if (!root)
+ root = debugfs_create_dir("cpqhp", NULL);
+}
+
+void cpqhp_shutdown_debugfs(void)
+{
+ debugfs_remove(root);
+}
+
+void cpqhp_create_debugfs_files(struct controller *ctrl)
+{
+ ctrl->dentry = debugfs_create_file(ctrl->pci_dev->dev.bus_id, S_IRUGO, root, ctrl, &debug_ops);
+}
+
+void cpqhp_remove_debugfs_files(struct controller *ctrl)
+{
+ if (ctrl->dentry)
+ debugfs_remove(ctrl->dentry);
+ ctrl->dentry = NULL;
+}
+
diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c
index b1ba429e0a2d..155133fe5c12 100644
--- a/drivers/pci/hotplug/ibmphp_pci.c
+++ b/drivers/pci/hotplug/ibmphp_pci.c
@@ -969,7 +969,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno)
debug ("io 32\n");
need_io_upper = TRUE;
}
- if ((io_base & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
+ if ((pfmem_base & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
debug ("pfmem 64\n");
need_pfmem_upper = TRUE;
}
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 8df704860348..4fb569018a24 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -103,7 +103,10 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
static int init_slots(struct controller *ctrl)
{
- struct slot *new_slot;
+ struct slot *slot;
+ struct hpc_ops *hpc_ops;
+ struct hotplug_slot *hotplug_slot;
+ struct hotplug_slot_info *hotplug_slot_info;
u8 number_of_slots;
u8 slot_device;
u32 slot_number;
@@ -114,59 +117,66 @@ static int init_slots(struct controller *ctrl)
slot_number = ctrl->first_slot;
while (number_of_slots) {
- new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
- if (!new_slot)
+ slot = kmalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot)
goto error;
- memset(new_slot, 0, sizeof(struct slot));
- new_slot->hotplug_slot =
- kmalloc(sizeof(*(new_slot->hotplug_slot)),
+ memset(slot, 0, sizeof(struct slot));
+ slot->hotplug_slot =
+ kmalloc(sizeof(*(slot->hotplug_slot)),
GFP_KERNEL);
- if (!new_slot->hotplug_slot)
+ if (!slot->hotplug_slot)
goto error_slot;
- memset(new_slot->hotplug_slot, 0, sizeof(struct hotplug_slot));
+ hotplug_slot = slot->hotplug_slot;
+ memset(hotplug_slot, 0, sizeof(struct hotplug_slot));
- new_slot->hotplug_slot->info =
- kmalloc(sizeof(*(new_slot->hotplug_slot->info)),
+ hotplug_slot->info =
+ kmalloc(sizeof(*(hotplug_slot->info)),
GFP_KERNEL);
- if (!new_slot->hotplug_slot->info)
+ if (!hotplug_slot->info)
goto error_hpslot;
- memset(new_slot->hotplug_slot->info, 0,
+ hotplug_slot_info = hotplug_slot->info;
+ memset(hotplug_slot_info, 0,
sizeof(struct hotplug_slot_info));
- new_slot->hotplug_slot->name = kmalloc(SLOT_NAME_SIZE,
- GFP_KERNEL);
- if (!new_slot->hotplug_slot->name)
+ hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
+ if (!hotplug_slot->name)
goto error_info;
- new_slot->ctrl = ctrl;
- new_slot->bus = ctrl->slot_bus;
- new_slot->device = slot_device;
- new_slot->hpc_ops = ctrl->hpc_ops;
+ slot->ctrl = ctrl;
+ slot->bus = ctrl->slot_bus;
+ slot->device = slot_device;
+ slot->hpc_ops = hpc_ops = ctrl->hpc_ops;
- new_slot->number = ctrl->first_slot;
- new_slot->hp_slot = slot_device - ctrl->slot_device_offset;
+ slot->number = ctrl->first_slot;
+ slot->hp_slot = slot_device - ctrl->slot_device_offset;
/* register this slot with the hotplug pci core */
- new_slot->hotplug_slot->private = new_slot;
- new_slot->hotplug_slot->release = &release_slot;
- make_slot_name(new_slot->hotplug_slot->name, SLOT_NAME_SIZE, new_slot);
- new_slot->hotplug_slot->ops = &pciehp_hotplug_slot_ops;
-
- new_slot->hpc_ops->get_power_status(new_slot, &(new_slot->hotplug_slot->info->power_status));
- new_slot->hpc_ops->get_attention_status(new_slot, &(new_slot->hotplug_slot->info->attention_status));
- new_slot->hpc_ops->get_latch_status(new_slot, &(new_slot->hotplug_slot->info->latch_status));
- new_slot->hpc_ops->get_adapter_status(new_slot, &(new_slot->hotplug_slot->info->adapter_status));
-
- dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x slot_device_offset=%x\n",
- new_slot->bus, new_slot->device, new_slot->hp_slot, new_slot->number, ctrl->slot_device_offset);
- result = pci_hp_register (new_slot->hotplug_slot);
+ hotplug_slot->private = slot;
+ hotplug_slot->release = &release_slot;
+ make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot);
+ hotplug_slot->ops = &pciehp_hotplug_slot_ops;
+
+ hpc_ops->get_power_status(slot,
+ &(hotplug_slot_info->power_status));
+ hpc_ops->get_attention_status(slot,
+ &(hotplug_slot_info->attention_status));
+ hpc_ops->get_latch_status(slot,
+ &(hotplug_slot_info->latch_status));
+ hpc_ops->get_adapter_status(slot,
+ &(hotplug_slot_info->adapter_status));
+
+ dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
+ "slot_device_offset=%x\n",
+ slot->bus, slot->device, slot->hp_slot, slot->number,
+ ctrl->slot_device_offset);
+ result = pci_hp_register(hotplug_slot);
if (result) {
err ("pci_hp_register failed with error %d\n", result);
goto error_name;
}
- new_slot->next = ctrl->slot;
- ctrl->slot = new_slot;
+ slot->next = ctrl->slot;
+ ctrl->slot = slot;
number_of_slots--;
slot_device++;
@@ -176,13 +186,13 @@ static int init_slots(struct controller *ctrl)
return 0;
error_name:
- kfree(new_slot->hotplug_slot->name);
+ kfree(hotplug_slot->name);
error_info:
- kfree(new_slot->hotplug_slot->info);
+ kfree(hotplug_slot_info);
error_hpslot:
- kfree(new_slot->hotplug_slot);
+ kfree(hotplug_slot);
error_slot:
- kfree(new_slot);
+ kfree(slot);
error:
return result;
}
@@ -502,7 +512,7 @@ static void __exit unload_pciehpd(void)
}
-int hpdriver_context = 0;
+static int hpdriver_context = 0;
static void pciehp_remove (struct pcie_device *device)
{
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index ac1e495c314e..77e530321de2 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -787,8 +787,13 @@ static int hpc_power_on_slot(struct slot * slot)
slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON;
+ /* Enable detection that we turned off at slot power-off time */
if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ slot_cmd = slot_cmd |
+ PWR_FAULT_DETECT_ENABLE |
+ MRL_DETECT_ENABLE |
+ PRSN_DETECT_ENABLE |
+ HP_INTR_ENABLE;
retval = pcie_write_cmd(slot, slot_cmd);
@@ -833,8 +838,18 @@ static int hpc_power_off_slot(struct slot * slot)
slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF;
+ /*
+ * If we get MRL or presence detect interrupts now, the isr
+ * will notice the sticky power-fault bit too and issue power
+ * indicator change commands. This will lead to an endless loop
+ * of command completions, since the power-fault bit remains on
+ * till the slot is powered on again.
+ */
if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ slot_cmd = (slot_cmd &
+ ~PWR_FAULT_DETECT_ENABLE &
+ ~MRL_DETECT_ENABLE &
+ ~PRSN_DETECT_ENABLE) | HP_INTR_ENABLE;
retval = pcie_write_cmd(slot, slot_cmd);
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 647673a7d224..4017fb03a0b8 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -34,6 +34,31 @@
#include "../pci.h"
#include "pciehp.h"
+static int pciehp_add_bridge(struct pci_dev *dev)
+{
+ struct pci_bus *parent = dev->bus;
+ int pass, busnr, start = parent->secondary;
+ int end = parent->subordinate;
+
+ for (busnr = start; busnr <= end; busnr++) {
+ if (!pci_find_bus(pci_domain_nr(parent), busnr))
+ break;
+ }
+ if (busnr-- > end) {
+ err("No bus number available for hot-added bridge %s\n",
+ pci_name(dev));
+ return -1;
+ }
+ for (pass = 0; pass < 2; pass++)
+ busnr = pci_scan_bridge(parent, dev, busnr, pass);
+ if (!dev->subordinate)
+ return -1;
+ pci_bus_size_bridges(dev->subordinate);
+ pci_bus_assign_resources(parent);
+ pci_enable_bridges(parent);
+ pci_bus_add_devices(parent);
+ return 0;
+}
int pciehp_configure_device(struct slot *p_slot)
{
@@ -55,8 +80,8 @@ int pciehp_configure_device(struct slot *p_slot)
}
for (fn = 0; fn < 8; fn++) {
- if (!(dev = pci_find_slot(p_slot->bus,
- PCI_DEVFN(p_slot->device, fn))))
+ dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
+ if (!dev)
continue;
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
err("Cannot hot-add display device %s\n",
@@ -65,27 +90,7 @@ int pciehp_configure_device(struct slot *p_slot)
}
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
- /* Find an unused bus number for the new bridge */
- struct pci_bus *child;
- unsigned char busnr, start = parent->secondary;
- unsigned char end = parent->subordinate;
- for (busnr = start; busnr <= end; busnr++) {
- if (!pci_find_bus(pci_domain_nr(parent),
- busnr))
- break;
- }
- if (busnr >= end) {
- err("No free bus for hot-added bridge\n");
- continue;
- }
- child = pci_add_new_bus(parent, dev, busnr);
- if (!child) {
- err("Cannot add new bus for %s\n",
- pci_name(dev));
- continue;
- }
- child->subordinate = pci_do_scan_bus(child);
- pci_bus_size_bridges(child);
+ pciehp_add_bridge(dev);
}
/* TBD: program firmware provided _HPP values */
/* program_fw_provided_values(dev); */
@@ -93,7 +98,6 @@ int pciehp_configure_device(struct slot *p_slot)
pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
- pci_enable_bridges(parent);
return 0;
}
diff --git a/drivers/pci/hotplug/pciehprm_acpi.c b/drivers/pci/hotplug/pciehprm_acpi.c
index ae244e218620..2bdb30f68bf8 100644
--- a/drivers/pci/hotplug/pciehprm_acpi.c
+++ b/drivers/pci/hotplug/pciehprm_acpi.c
@@ -174,7 +174,9 @@ int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
acpi_status status;
acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
struct pci_dev *pdev = dev;
+ struct pci_bus *parent;
u8 *path_name;
+
/*
* Per PCI firmware specification, we should run the ACPI _OSC
* method to get control of hotplug hardware before using it.
@@ -190,17 +192,18 @@ int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
*/
if (!pdev || !pdev->bus->parent)
break;
+ parent = pdev->bus->parent;
dbg("Could not find %s in acpi namespace, trying parent\n",
pci_name(pdev));
- if (!pdev->bus->parent->self)
+ if (!parent->self)
/* Parent must be a host bridge */
handle = acpi_get_pci_rootbridge_handle(
- pci_domain_nr(pdev->bus->parent),
- pdev->bus->parent->number);
+ pci_domain_nr(parent),
+ parent->number);
else
handle = DEVICE_ACPI_HANDLE(
- &(pdev->bus->parent->self->dev));
- pdev = pdev->bus->parent->self;
+ &(parent->self->dev));
+ pdev = parent->self;
}
while (handle) {
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index cc03609f45d0..7d93dbaf628d 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -112,28 +112,6 @@ static struct slot *find_slot(struct device_node *dn)
return NULL;
}
-static void rpadlpar_claim_one_bus(struct pci_bus *b)
-{
- struct list_head *ld;
- struct pci_bus *child_bus;
-
- for (ld = b->devices.next; ld != &b->devices; ld = ld->next) {
- struct pci_dev *dev = pci_dev_b(ld);
- int i;
-
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- struct resource *r = &dev->resource[i];
-
- if (r->parent || !r->start || !r->flags)
- continue;
- rpaphp_claim_resource(dev, i);
- }
- }
-
- list_for_each_entry(child_bus, &b->children, node)
- rpadlpar_claim_one_bus(child_bus);
-}
-
static struct pci_dev *dlpar_find_new_dev(struct pci_bus *parent,
struct device_node *dev_dn)
{
@@ -154,7 +132,8 @@ static struct pci_dev *dlpar_pci_add_bus(struct device_node *dn)
struct pci_controller *phb = pdn->phb;
struct pci_dev *dev = NULL;
- rpaphp_eeh_init_nodes(dn);
+ eeh_add_device_tree_early(dn);
+
/* Add EADS device to PHB bus, adding new entry to bus->devices */
dev = of_create_pci_dev(dn, phb->bus, pdn->devfn);
if (!dev) {
@@ -170,7 +149,7 @@ static struct pci_dev *dlpar_pci_add_bus(struct device_node *dn)
rpaphp_init_new_devs(dev->subordinate);
/* Claim new bus resources */
- rpadlpar_claim_one_bus(dev->bus);
+ pcibios_claim_one_bus(dev->bus);
/* ioremap() for child bus, which may or may not succeed */
(void) remap_bus_range(dev->bus);
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index 4b35097b3d9f..396b54b0c847 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -62,28 +62,6 @@ struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn)
}
EXPORT_SYMBOL_GPL(rpaphp_find_pci_bus);
-int rpaphp_claim_resource(struct pci_dev *dev, int resource)
-{
- struct resource *res = &dev->resource[resource];
- struct resource *root = pci_find_parent_resource(dev, res);
- char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
- int err = -EINVAL;
-
- if (root != NULL) {
- err = request_resource(root, res);
- }
-
- if (err) {
- err("PCI: %s region %d of %s %s [%lx:%lx]\n",
- root ? "Address space collision on" :
- "No parent found for",
- resource, dtype, pci_name(dev), res->start, res->end);
- }
- return err;
-}
-
-EXPORT_SYMBOL_GPL(rpaphp_claim_resource);
-
static int rpaphp_get_sensor_state(struct slot *slot, int *state)
{
int rc;
@@ -177,7 +155,7 @@ void rpaphp_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
if (r->parent || !r->start || !r->flags)
continue;
- rpaphp_claim_resource(dev, i);
+ pci_claim_resource(dev, i);
}
}
}
@@ -287,18 +265,6 @@ rpaphp_pci_config_slot(struct pci_bus *bus)
return dev;
}
-void rpaphp_eeh_init_nodes(struct device_node *dn)
-{
- struct device_node *sib;
-
- for (sib = dn->child; sib; sib = sib->sibling)
- rpaphp_eeh_init_nodes(sib);
- eeh_add_device_early(dn);
- return;
-
-}
-EXPORT_SYMBOL_GPL(rpaphp_eeh_init_nodes);
-
static void print_slot_pci_funcs(struct pci_bus *bus)
{
struct device_node *dn;
@@ -324,7 +290,7 @@ int rpaphp_config_pci_adapter(struct pci_bus *bus)
if (!dn)
goto exit;
- rpaphp_eeh_init_nodes(dn);
+ eeh_add_device_tree_early(dn);
dev = rpaphp_pci_config_slot(bus);
if (!dev) {
err("%s: can't find any devices.\n", __FUNCTION__);
@@ -370,13 +336,14 @@ EXPORT_SYMBOL_GPL(rpaphp_unconfig_pci_adapter);
static int setup_pci_hotplug_slot_info(struct slot *slot)
{
+ struct hotplug_slot_info *hotplug_slot_info = slot->hotplug_slot->info;
+
dbg("%s Initilize the PCI slot's hotplug->info structure ...\n",
__FUNCTION__);
- rpaphp_get_power_status(slot, &slot->hotplug_slot->info->power_status);
+ rpaphp_get_power_status(slot, &hotplug_slot_info->power_status);
rpaphp_get_pci_adapter_status(slot, 1,
- &slot->hotplug_slot->info->
- adapter_status);
- if (slot->hotplug_slot->info->adapter_status == NOT_VALID) {
+ &hotplug_slot_info->adapter_status);
+ if (hotplug_slot_info->adapter_status == NOT_VALID) {
err("%s: NOT_VALID: skip dn->full_name=%s\n",
__FUNCTION__, slot->dn->full_name);
return -EINVAL;
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 08ad26a0cae7..ce0e9b6ce833 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -98,6 +98,10 @@ struct controller {
enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
+ u32 cap_offset;
+ unsigned long mmio_base;
+ unsigned long mmio_size;
+ volatile int cmd_busy;
};
struct hotplug_params {
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 63628e01dd43..a2b3f0010cec 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -65,6 +65,7 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
+static int get_address (struct hotplug_slot *slot, u32 *value);
static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
@@ -77,6 +78,7 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
+ .get_address = get_address,
.get_max_bus_speed = get_max_bus_speed,
.get_cur_bus_speed = get_cur_bus_speed,
};
@@ -314,6 +316,18 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
return 0;
}
+static int get_address (struct hotplug_slot *hotplug_slot, u32 *value)
+{
+ struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+ struct pci_bus *bus = slot->ctrl->pci_dev->subordinate;
+
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
+
+ *value = (pci_domain_nr(bus) << 16) | (slot->bus << 8) | slot->device;
+
+ return 0;
+}
+
static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
{
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
@@ -377,8 +391,6 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_free_ctrl;
}
- ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
-
pci_set_drvdata(pdev, ctrl);
ctrl->pci_bus = kmalloc (sizeof (*ctrl->pci_bus), GFP_KERNEL);
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 58619359ad08..25ccb0e47593 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -248,7 +248,6 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
- wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
@@ -330,9 +329,6 @@ static int board_added(struct slot *p_slot)
up(&ctrl->crit_sect);
return -1;
}
-
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
if (rc) {
@@ -352,7 +348,6 @@ static int board_added(struct slot *p_slot)
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
- wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
@@ -367,7 +362,6 @@ static int board_added(struct slot *p_slot)
up(&ctrl->crit_sect);
return rc;
}
- wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
@@ -494,7 +488,6 @@ static int board_added(struct slot *p_slot)
up(&ctrl->crit_sect);
return rc;
}
- wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
@@ -532,9 +525,6 @@ static int board_added(struct slot *p_slot)
p_slot->hpc_ops->green_led_on(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
-
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
@@ -552,8 +542,6 @@ err_exit:
up(&ctrl->crit_sect);
return rc;
}
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
if (rc) {
@@ -603,8 +591,6 @@ static int remove_board(struct slot *p_slot)
up(&ctrl->crit_sect);
return rc;
}
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
if (rc) {
@@ -621,8 +607,6 @@ static int remove_board(struct slot *p_slot)
up(&ctrl->crit_sect);
return rc;
}
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
@@ -676,9 +660,6 @@ static void shpchp_pushbutton_thread (unsigned long slot)
p_slot->hpc_ops->green_led_off(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (p_slot->ctrl);
-
/* Done with exclusive hardware access */
up(&p_slot->ctrl->crit_sect);
}
@@ -790,14 +771,9 @@ static void interrupt_event_handler(struct controller *ctrl)
down(&ctrl->crit_sect);
p_slot->hpc_ops->green_led_on(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
-
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
break;
@@ -806,12 +782,8 @@ static void interrupt_event_handler(struct controller *ctrl)
down(&ctrl->crit_sect);
p_slot->hpc_ops->green_led_off(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
@@ -845,14 +817,9 @@ static void interrupt_event_handler(struct controller *ctrl)
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
-
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
@@ -870,12 +837,8 @@ static void interrupt_event_handler(struct controller *ctrl)
down(&ctrl->crit_sect);
p_slot->hpc_ops->set_attention_status(p_slot, 1);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->green_led_off(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 9987a6fd65b8..b4226ff3a854 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -275,6 +275,25 @@ static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds)
return;
}
+static inline int shpc_wait_cmd(struct controller *ctrl)
+{
+ int retval = 0;
+ unsigned int timeout_msec = shpchp_poll_mode ? 2000 : 1000;
+ unsigned long timeout = msecs_to_jiffies(timeout_msec);
+ int rc = wait_event_interruptible_timeout(ctrl->queue,
+ !ctrl->cmd_busy, timeout);
+ if (!rc) {
+ retval = -EIO;
+ err("Command not completed in %d msec\n", timeout_msec);
+ } else if (rc < 0) {
+ retval = -EINTR;
+ info("Command was interrupted by a signal\n");
+ }
+ ctrl->cmd_busy = 0;
+
+ return retval;
+}
+
static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
{
struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
@@ -314,8 +333,14 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
/* To make sure the Controller Busy bit is 0 before we send out the
* command.
*/
+ slot->ctrl->cmd_busy = 1;
writew(temp_word, php_ctlr->creg + CMD);
+ /*
+ * Wait for command completion.
+ */
+ retval = shpc_wait_cmd(slot->ctrl);
+
DBG_LEAVE_ROUTINE
return retval;
}
@@ -604,7 +629,7 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
if (pi == 2) {
- *mode = (sec_bus_status & 0x0100) >> 7;
+ *mode = (sec_bus_status & 0x0100) >> 8;
} else {
retval = -1;
}
@@ -791,7 +816,7 @@ static void hpc_release_ctlr(struct controller *ctrl)
}
if (php_ctlr->pci_dev) {
iounmap(php_ctlr->creg);
- release_mem_region(pci_resource_start(php_ctlr->pci_dev, 0), pci_resource_len(php_ctlr->pci_dev, 0));
+ release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
php_ctlr->pci_dev = NULL;
}
@@ -1058,12 +1083,13 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
if (intr_loc & 0x0001) {
/*
* Command Complete Interrupt Pending
- * RO only - clear by writing 0 to the Command Completion
+ * RO only - clear by writing 1 to the Command Completion
* Detect bit in Controller SERR-INT register
*/
temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
- temp_dword &= 0xfffeffff;
+ temp_dword &= 0xfffdffff;
writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+ ctrl->cmd_busy = 0;
wake_up_interruptible(&ctrl->queue);
}
@@ -1121,7 +1147,6 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
int retval = 0;
u8 pi;
u32 slot_avail1, slot_avail2;
- int slot_num;
DBG_ENTER_ROUTINE
@@ -1140,39 +1165,39 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
if (pi == 2) {
- if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_533) >> 27) ) != 0 )
+ if (slot_avail2 & SLOT_133MHZ_PCIX_533)
bus_speed = PCIX_133MHZ_533;
- else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_533) >> 23) ) != 0 )
+ else if (slot_avail2 & SLOT_100MHZ_PCIX_533)
bus_speed = PCIX_100MHZ_533;
- else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_533) >> 19) ) != 0 )
+ else if (slot_avail2 & SLOT_66MHZ_PCIX_533)
bus_speed = PCIX_66MHZ_533;
- else if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_266) >> 15) ) != 0 )
+ else if (slot_avail2 & SLOT_133MHZ_PCIX_266)
bus_speed = PCIX_133MHZ_266;
- else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_266) >> 11) ) != 0 )
+ else if (slot_avail2 & SLOT_100MHZ_PCIX_266)
bus_speed = PCIX_100MHZ_266;
- else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_266) >> 7) ) != 0 )
+ else if (slot_avail2 & SLOT_66MHZ_PCIX_266)
bus_speed = PCIX_66MHZ_266;
- else if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 )
+ else if (slot_avail1 & SLOT_133MHZ_PCIX)
bus_speed = PCIX_133MHZ;
- else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 )
+ else if (slot_avail1 & SLOT_100MHZ_PCIX)
bus_speed = PCIX_100MHZ;
- else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 )
+ else if (slot_avail1 & SLOT_66MHZ_PCIX)
bus_speed = PCIX_66MHZ;
- else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 )
+ else if (slot_avail2 & SLOT_66MHZ)
bus_speed = PCI_66MHZ;
- else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 )
+ else if (slot_avail1 & SLOT_33MHZ)
bus_speed = PCI_33MHZ;
else bus_speed = PCI_SPEED_UNKNOWN;
} else {
- if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 )
+ if (slot_avail1 & SLOT_133MHZ_PCIX)
bus_speed = PCIX_133MHZ;
- else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 )
+ else if (slot_avail1 & SLOT_100MHZ_PCIX)
bus_speed = PCIX_100MHZ;
- else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 )
+ else if (slot_avail1 & SLOT_66MHZ_PCIX)
bus_speed = PCIX_66MHZ;
- else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 )
+ else if (slot_avail2 & SLOT_66MHZ)
bus_speed = PCI_66MHZ;
- else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 )
+ else if (slot_avail1 & SLOT_33MHZ)
bus_speed = PCI_33MHZ;
else bus_speed = PCI_SPEED_UNKNOWN;
}
@@ -1321,19 +1346,34 @@ static struct hpc_ops shpchp_hpc_ops = {
.check_cmd_status = hpc_check_cmd_status,
};
+inline static int shpc_indirect_creg_read(struct controller *ctrl, int index,
+ u32 *value)
+{
+ int rc;
+ u32 cap_offset = ctrl->cap_offset;
+ struct pci_dev *pdev = ctrl->pci_dev;
+
+ rc = pci_write_config_byte(pdev, cap_offset + DWORD_SELECT, index);
+ if (rc)
+ return rc;
+ return pci_read_config_dword(pdev, cap_offset + DWORD_DATA, value);
+}
+
int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
{
struct php_ctlr_state_s *php_ctlr, *p;
void *instance_id = ctrl;
- int rc;
+ int rc, num_slots = 0;
u8 hp_slot;
static int first = 1;
- u32 shpc_cap_offset, shpc_base_offset;
+ u32 shpc_base_offset;
u32 tempdword, slot_reg;
u8 i;
DBG_ENTER_ROUTINE
+ ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
+
spin_lock_init(&list_lock);
php_ctlr = (struct php_ctlr_state_s *) kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL);
@@ -1348,41 +1388,45 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
PCI_DEVICE_ID_AMD_GOLAM_7450)) {
- shpc_base_offset = 0; /* amd shpc driver doesn't use this; assume 0 */
+ /* amd shpc driver doesn't use Base Offset; assume 0 */
+ ctrl->mmio_base = pci_resource_start(pdev, 0);
+ ctrl->mmio_size = pci_resource_len(pdev, 0);
} else {
- if ((shpc_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC)) == 0) {
- err("%s : shpc_cap_offset == 0\n", __FUNCTION__);
+ ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
+ if (!ctrl->cap_offset) {
+ err("%s : cap_offset == 0\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: shpc_cap_offset = %x\n", __FUNCTION__, shpc_cap_offset);
-
- rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , BASE_OFFSET);
+ dbg("%s: cap_offset = %x\n", __FUNCTION__, ctrl->cap_offset);
+
+ rc = shpc_indirect_creg_read(ctrl, 0, &shpc_base_offset);
if (rc) {
- err("%s : pci_word_config_byte failed\n", __FUNCTION__);
+ err("%s: cannot read base_offset\n", __FUNCTION__);
goto abort_free_ctlr;
}
-
- rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &shpc_base_offset);
+
+ rc = shpc_indirect_creg_read(ctrl, 3, &tempdword);
if (rc) {
- err("%s : pci_read_config_dword failed\n", __FUNCTION__);
+ err("%s: cannot read slot config\n", __FUNCTION__);
goto abort_free_ctlr;
}
+ num_slots = tempdword & SLOT_NUM;
+ dbg("%s: num_slots (indirect) %x\n", __FUNCTION__, num_slots);
- for (i = 0; i <= 14; i++) {
- rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , i);
- if (rc) {
- err("%s : pci_word_config_byte failed\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
-
- rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &tempdword);
+ for (i = 0; i < 9 + num_slots; i++) {
+ rc = shpc_indirect_creg_read(ctrl, i, &tempdword);
if (rc) {
- err("%s : pci_read_config_dword failed\n", __FUNCTION__);
+ err("%s: cannot read creg (index = %d)\n",
+ __FUNCTION__, i);
goto abort_free_ctlr;
}
dbg("%s: offset %d: value %x\n", __FUNCTION__,i,
tempdword);
}
+
+ ctrl->mmio_base =
+ pci_resource_start(pdev, 0) + shpc_base_offset;
+ ctrl->mmio_size = 0x24 + 0x4 * num_slots;
}
if (first) {
@@ -1396,16 +1440,16 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
if (pci_enable_device(pdev))
goto abort_free_ctlr;
- if (!request_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0), MY_NAME)) {
+ if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
err("%s: cannot reserve MMIO region\n", __FUNCTION__);
goto abort_free_ctlr;
}
- php_ctlr->creg = ioremap(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0));
+ php_ctlr->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
if (!php_ctlr->creg) {
- err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__, pci_resource_len(pdev, 0),
- pci_resource_start(pdev, 0) + shpc_base_offset);
- release_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0));
+ err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__,
+ ctrl->mmio_size, ctrl->mmio_base);
+ release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
goto abort_free_ctlr;
}
dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg);
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index 38009bc0fd5d..19e1a5e1e30b 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -89,10 +89,11 @@ int shpchp_configure_device(struct slot *p_slot)
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
int num, fn;
- dev = pci_find_slot(p_slot->bus, PCI_DEVFN(p_slot->device, 0));
+ dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
err("Device %s already exists at %x:%x, cannot hot-add\n",
pci_name(dev), p_slot->bus, p_slot->device);
+ pci_dev_put(dev);
return -EINVAL;
}
@@ -103,12 +104,13 @@ int shpchp_configure_device(struct slot *p_slot)
}
for (fn = 0; fn < 8; fn++) {
- if (!(dev = pci_find_slot(p_slot->bus,
- PCI_DEVFN(p_slot->device, fn))))
+ dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
+ if (!dev)
continue;
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
err("Cannot hot-add display device %s\n",
pci_name(dev));
+ pci_dev_put(dev);
continue;
}
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
@@ -124,18 +126,21 @@ int shpchp_configure_device(struct slot *p_slot)
}
if (busnr >= end) {
err("No free bus for hot-added bridge\n");
+ pci_dev_put(dev);
continue;
}
child = pci_add_new_bus(parent, dev, busnr);
if (!child) {
err("Cannot add new bus for %s\n",
pci_name(dev));
+ pci_dev_put(dev);
continue;
}
child->subordinate = pci_do_scan_bus(child);
pci_bus_size_bridges(child);
}
program_fw_provided_values(dev);
+ pci_dev_put(dev);
}
pci_bus_assign_resources(parent);
@@ -149,17 +154,19 @@ int shpchp_unconfigure_device(struct slot *p_slot)
int rc = 0;
int j;
u8 bctl = 0;
-
+ struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+
dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device);
for (j=0; j<8 ; j++) {
- struct pci_dev* temp = pci_find_slot(p_slot->bus,
+ struct pci_dev* temp = pci_get_slot(parent,
(p_slot->device << 3) | j);
if (!temp)
continue;
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
err("Cannot remove display device %s\n",
pci_name(temp));
+ pci_dev_put(temp);
continue;
}
if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
@@ -167,10 +174,12 @@ int shpchp_unconfigure_device(struct slot *p_slot)
if (bctl & PCI_BRIDGE_CTL_VGA) {
err("Cannot remove display device %s\n",
pci_name(temp));
+ pci_dev_put(temp);
continue;
}
}
pci_remove_bus_device(temp);
+ pci_dev_put(temp);
}
return rc;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8e287a828d5d..d2a633efa10a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -19,6 +19,7 @@
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
+#if 0
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
@@ -63,6 +64,8 @@ pci_max_busnr(void)
return max;
}
+#endif /* 0 */
+
static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn, u8 pos, int cap)
{
u8 id;
@@ -587,7 +590,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
{
u8 pin;
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ pin = dev->pin;
if (!pin)
return -1;
pin--;
@@ -917,8 +920,6 @@ EXPORT_SYMBOL_GPL(pci_restore_bars);
EXPORT_SYMBOL(pci_enable_device_bars);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pci_disable_device);
-EXPORT_SYMBOL(pci_max_busnr);
-EXPORT_SYMBOL(pci_bus_max_busnr);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
EXPORT_SYMBOL(pci_release_regions);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 294849d24590..a6dfee2f6d2b 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -26,20 +26,15 @@ extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
#ifdef CONFIG_PROC_FS
extern int pci_proc_attach_device(struct pci_dev *dev);
extern int pci_proc_detach_device(struct pci_dev *dev);
-extern int pci_proc_attach_bus(struct pci_bus *bus);
extern int pci_proc_detach_bus(struct pci_bus *bus);
#else
static inline int pci_proc_attach_device(struct pci_dev *dev) { return 0; }
static inline int pci_proc_detach_device(struct pci_dev *dev) { return 0; }
-static inline int pci_proc_attach_bus(struct pci_bus *bus) { return 0; }
static inline int pci_proc_detach_bus(struct pci_bus *bus) { return 0; }
#endif
/* Functions for PCI Hotplug drivers to use */
extern unsigned int pci_do_scan_bus(struct pci_bus *bus);
-extern int pci_remove_device_safe(struct pci_dev *dev);
-extern unsigned char pci_max_busnr(void);
-extern unsigned char pci_bus_max_busnr(struct pci_bus *bus);
extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
extern void pci_remove_legacy_files(struct pci_bus *bus);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 467a4ceccf10..e4e5f1e8d816 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -238,8 +238,8 @@ static void pcie_device_init(struct pci_dev *parent, struct pcie_device *dev,
device->driver = NULL;
device->driver_data = NULL;
device->release = release_pcie_device; /* callback to free pcie dev */
- sprintf(&device->bus_id[0], "pcie%02x",
- get_descriptor_id(port_type, service_type));
+ snprintf(device->bus_id, sizeof(device->bus_id), "%s:pcie%02x",
+ pci_name(parent), get_descriptor_id(port_type, service_type));
device->parent = &parent->dev;
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index fce2cb2112d8..adfad4fd6a13 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -264,8 +264,10 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
if (base <= limit) {
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
- res->start = base;
- res->end = limit + 0xfff;
+ if (!res->start)
+ res->start = base;
+ if (!res->end)
+ res->end = limit + 0xfff;
}
res = child->resource[1];
@@ -431,7 +433,7 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max
{
struct pci_bus *child;
int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
- u32 buses, i;
+ u32 buses, i, j = 0;
u16 bctl;
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
@@ -541,10 +543,29 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max
* as cards with a PCI-to-PCI bridge can be
* inserted later.
*/
- for (i=0; i<CARDBUS_RESERVE_BUSNR; i++)
+ for (i=0; i<CARDBUS_RESERVE_BUSNR; i++) {
+ struct pci_bus *parent = bus;
if (pci_find_bus(pci_domain_nr(bus),
max+i+1))
break;
+ while (parent->parent) {
+ if ((!pcibios_assign_all_busses()) &&
+ (parent->subordinate > max) &&
+ (parent->subordinate <= max+i)) {
+ j = 1;
+ }
+ parent = parent->parent;
+ }
+ if (j) {
+ /*
+ * Often, there are two cardbus bridges
+ * -- try to leave one valid bus number
+ * for each one.
+ */
+ i /= 2;
+ break;
+ }
+ }
max += i;
pci_fixup_parent_subordinate_busnr(child, max);
}
@@ -559,6 +580,22 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max
sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
+ while (bus->parent) {
+ if ((child->subordinate > bus->subordinate) ||
+ (child->number > bus->subordinate) ||
+ (child->number < bus->number) ||
+ (child->subordinate < bus->number)) {
+ printk(KERN_WARNING "PCI: Bus #%02x (-#%02x) may be "
+ "hidden behind%s bridge #%02x (-#%02x)%s\n",
+ child->number, child->subordinate,
+ bus->self->transparent ? " transparent" : " ",
+ bus->number, bus->subordinate,
+ pcibios_assign_all_busses() ? " " :
+ " (try 'pci=assign-busses')");
+ }
+ bus = bus->parent;
+ }
+
return max;
}
@@ -571,6 +608,7 @@ static void pci_read_irq(struct pci_dev *dev)
unsigned char irq;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
+ dev->pin = irq;
if (irq)
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
dev->irq = irq;
@@ -624,6 +662,7 @@ static int pci_setup_device(struct pci_dev * dev)
/* The PCI-to-PCI bridge spec requires that subtractive
decoding (i.e. transparent) bridge must have programming
interface code of 0x01. */
+ pci_read_irq(dev);
dev->transparent = ((dev->class & 0xff) == 1);
pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
break;
@@ -678,7 +717,7 @@ static void pci_release_dev(struct device *dev)
* reading the dword at 0x100 which must either be 0 or a valid extended
* capability header.
*/
-static int pci_cfg_space_size(struct pci_dev *dev)
+int pci_cfg_space_size(struct pci_dev *dev)
{
int pos;
u32 status;
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 9cb6dd0834be..92a885760832 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -431,6 +431,7 @@ int pci_proc_detach_device(struct pci_dev *dev)
return 0;
}
+#if 0
int pci_proc_attach_bus(struct pci_bus* bus)
{
struct proc_dir_entry *de = bus->procdir;
@@ -447,6 +448,7 @@ int pci_proc_attach_bus(struct pci_bus* bus)
}
return 0;
}
+#endif /* 0 */
int pci_proc_detach_bus(struct pci_bus* bus)
{
@@ -612,7 +614,6 @@ __initcall(pci_proc_init);
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pci_proc_attach_device);
-EXPORT_SYMBOL(pci_proc_attach_bus);
EXPORT_SYMBOL(pci_proc_detach_bus);
#endif
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f28ebdd3958a..605f0df0bfba 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1342,6 +1342,32 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
pci_do_fixups(dev, start, end);
}
+/* Enable 1k I/O space granularity on the Intel P64H2 */
+static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+{
+ u16 en1k;
+ u8 io_base_lo, io_limit_lo;
+ unsigned long base, limit;
+ struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
+
+ pci_read_config_word(dev, 0x40, &en1k);
+
+ if (en1k & 0x200) {
+ printk(KERN_INFO "PCI: Enable I/O Space to 1 KB Granularity\n");
+
+ pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
+ pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
+ base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
+ limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
+
+ if (base <= limit) {
+ res->start = base;
+ res->end = limit + 0x3ff;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
+
EXPORT_SYMBOL(pcie_mch_quirk);
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pci_fixup_device);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 27a294b6965d..1a6bf9de166f 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -48,6 +48,7 @@ static void pci_destroy_dev(struct pci_dev *dev)
* in question is not being used by a driver.
* Returns 0 on success.
*/
+#if 0
int pci_remove_device_safe(struct pci_dev *dev)
{
if (pci_dev_driver(dev))
@@ -55,7 +56,7 @@ int pci_remove_device_safe(struct pci_dev *dev)
pci_destroy_dev(dev);
return 0;
}
-EXPORT_SYMBOL(pci_remove_device_safe);
+#endif /* 0 */
void pci_remove_bus(struct pci_bus *pci_bus)
{
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 1b277d2c1c96..b502db2790e0 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -561,7 +561,7 @@ static int __devinit vrc4173_cardu_init(void)
{
vrc4173_cardu_slots = 0;
- return pci_module_init(&vrc4173_cardu_driver);
+ return pci_register_driver(&vrc4173_cardu_driver);
}
static void __devexit vrc4173_cardu_exit(void)
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index f10c86d60b64..995d9dd9ddd5 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -1195,7 +1195,7 @@ static int __init serial_txx9_init(void)
serial_txx9_register_ports(&serial_txx9_reg);
#ifdef ENABLE_SERIAL_TXX9_PCI
- ret = pci_module_init(&serial_txx9_pci_driver);
+ ret = pci_register_driver(&serial_txx9_pci_driver);
#endif
}
return ret;
diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c
index e9f5dee67e3c..2b972461a030 100644
--- a/drivers/video/cyblafb.c
+++ b/drivers/video/cyblafb.c
@@ -1666,6 +1666,7 @@ static int __devinit cyblafb_init(void)
#endif
output("CyblaFB version %s initializing\n", VERSION);
return pci_module_init(&cyblafb_pci_driver);
+ return pci_register_driver(&cyblafb_pci_driver);
}
static void __exit cyblafb_exit(void)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index de690ca73d58..0a44072383ec 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -78,6 +78,23 @@ typedef int __bitwise pci_power_t;
#define PCI_UNKNOWN ((pci_power_t __force) 5)
#define PCI_POWER_ERROR ((pci_power_t __force) -1)
+/** The pci_channel state describes connectivity between the CPU and
+ * the pci device. If some PCI bus between here and the pci device
+ * has crashed or locked up, this info is reflected here.
+ */
+typedef unsigned int __bitwise pci_channel_state_t;
+
+enum pci_channel_state {
+ /* I/O channel is in normal state */
+ pci_channel_io_normal = (__force pci_channel_state_t) 1,
+
+ /* I/O to channel is blocked */
+ pci_channel_io_frozen = (__force pci_channel_state_t) 2,
+
+ /* PCI card is dead */
+ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
+};
+
/*
* The pci_dev structure is used to describe PCI devices.
*/
@@ -98,6 +115,7 @@ struct pci_dev {
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
u8 rom_base_reg; /* which config register controls the ROM */
+ u8 pin; /* which interrupt pin this device uses */
struct pci_driver *driver; /* which driver has allocated this device */
u64 dma_mask; /* Mask of the bits of bus address this
@@ -110,6 +128,7 @@ struct pci_dev {
this is D0-D3, D0 being fully functional,
and D3 being off. */
+ pci_channel_state_t error_state; /* current connectivity state */
struct device dev; /* Generic device interface */
/* device is compatible with these IDs */
@@ -232,6 +251,54 @@ struct pci_dynids {
unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
};
+/* ---------------------------------------------------------------- */
+/** PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
+ * a set fof callbacks in struct pci_error_handlers, then that device driver
+ * will be notified of PCI bus errors, and will be driven to recovery
+ * when an error occurs.
+ */
+
+typedef unsigned int __bitwise pci_ers_result_t;
+
+enum pci_ers_result {
+ /* no result/none/not supported in device driver */
+ PCI_ERS_RESULT_NONE = (__force pci_ers_result_t) 1,
+
+ /* Device driver can recover without slot reset */
+ PCI_ERS_RESULT_CAN_RECOVER = (__force pci_ers_result_t) 2,
+
+ /* Device driver wants slot to be reset. */
+ PCI_ERS_RESULT_NEED_RESET = (__force pci_ers_result_t) 3,
+
+ /* Device has completely failed, is unrecoverable */
+ PCI_ERS_RESULT_DISCONNECT = (__force pci_ers_result_t) 4,
+
+ /* Device driver is fully recovered and operational */
+ PCI_ERS_RESULT_RECOVERED = (__force pci_ers_result_t) 5,
+};
+
+/* PCI bus error event callbacks */
+struct pci_error_handlers
+{
+ /* PCI bus error detected on this device */
+ pci_ers_result_t (*error_detected)(struct pci_dev *dev,
+ enum pci_channel_state error);
+
+ /* MMIO has been re-enabled, but not DMA */
+ pci_ers_result_t (*mmio_enabled)(struct pci_dev *dev);
+
+ /* PCI Express link has been reset */
+ pci_ers_result_t (*link_reset)(struct pci_dev *dev);
+
+ /* PCI slot has been reset */
+ pci_ers_result_t (*slot_reset)(struct pci_dev *dev);
+
+ /* Device driver may resume normal operations */
+ void (*resume)(struct pci_dev *dev);
+};
+
+/* ---------------------------------------------------------------- */
+
struct module;
struct pci_driver {
struct list_head node;
@@ -244,6 +311,7 @@ struct pci_driver {
int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); /* Enable wake event */
void (*shutdown) (struct pci_dev *dev);
+ struct pci_error_handlers *err_handler;
struct device_driver driver;
struct pci_dynids dynids;
};
@@ -448,6 +516,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass
void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
void *userdata);
+int pci_cfg_space_size(struct pci_dev *dev);
/* kmem_cache style wrapper around pci_alloc_consistent() */
diff --git a/sound/oss/ad1889.c b/sound/oss/ad1889.c
index 2cfd214e4c2a..a0d73f343100 100644
--- a/sound/oss/ad1889.c
+++ b/sound/oss/ad1889.c
@@ -1089,7 +1089,7 @@ static struct pci_driver ad1889_driver = {
static int __init ad1889_init_module(void)
{
- return pci_module_init(&ad1889_driver);
+ return pci_register_driver(&ad1889_driver);
}
static void ad1889_exit_module(void)
diff --git a/sound/oss/btaudio.c b/sound/oss/btaudio.c
index a85093fec7be..4007a5680acb 100644
--- a/sound/oss/btaudio.c
+++ b/sound/oss/btaudio.c
@@ -1101,7 +1101,7 @@ static int btaudio_init_module(void)
digital ? "digital" : "",
analog && digital ? "+" : "",
analog ? "analog" : "");
- return pci_module_init(&btaudio_pci_driver);
+ return pci_register_driver(&btaudio_pci_driver);
}
static void btaudio_cleanup_module(void)
diff --git a/sound/oss/cmpci.c b/sound/oss/cmpci.c
index 74dcca78c6c0..7cfbb08db537 100644
--- a/sound/oss/cmpci.c
+++ b/sound/oss/cmpci.c
@@ -3366,7 +3366,7 @@ static struct pci_driver cm_driver = {
static int __init init_cmpci(void)
{
printk(KERN_INFO "cmpci: version $Revision: 6.82 $ time " __TIME__ " " __DATE__ "\n");
- return pci_module_init(&cm_driver);
+ return pci_register_driver(&cm_driver);
}
static void __exit cleanup_cmpci(void)
diff --git a/sound/oss/cs4281/cs4281m.c b/sound/oss/cs4281/cs4281m.c
index 46dd41dc2a34..0720365f6438 100644
--- a/sound/oss/cs4281/cs4281m.c
+++ b/sound/oss/cs4281/cs4281m.c
@@ -4461,7 +4461,7 @@ static int __init cs4281_init_module(void)
printk(KERN_INFO "cs4281: version v%d.%02d.%d time " __TIME__ " "
__DATE__ "\n", CS4281_MAJOR_VERSION, CS4281_MINOR_VERSION,
CS4281_ARCH);
- rtn = pci_module_init(&cs4281_pci_driver);
+ rtn = pci_register_driver(&cs4281_pci_driver);
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
printk(KERN_INFO "cs4281: cs4281_init_module()- (%d)\n",rtn));
diff --git a/sound/oss/cs46xx.c b/sound/oss/cs46xx.c
index 0da4d93f04a6..58e25c82eaf2 100644
--- a/sound/oss/cs46xx.c
+++ b/sound/oss/cs46xx.c
@@ -5690,7 +5690,7 @@ static int __init cs46xx_init_module(void)
int rtn = 0;
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO
"cs46xx: cs46xx_init_module()+ \n"));
- rtn = pci_module_init(&cs46xx_pci_driver);
+ rtn = pci_register_driver(&cs46xx_pci_driver);
if(rtn == -ENODEV)
{
diff --git a/sound/oss/emu10k1/main.c b/sound/oss/emu10k1/main.c
index 9b905bae423e..23241cbdd90f 100644
--- a/sound/oss/emu10k1/main.c
+++ b/sound/oss/emu10k1/main.c
@@ -1428,7 +1428,7 @@ static int __init emu10k1_init_module(void)
{
printk(KERN_INFO "Creative EMU10K1 PCI Audio Driver, version " DRIVER_VERSION ", " __TIME__ " " __DATE__ "\n");
- return pci_module_init(&emu10k1_pci_driver);
+ return pci_register_driver(&emu10k1_pci_driver);
}
static void __exit emu10k1_cleanup_module(void)
diff --git a/sound/oss/es1370.c b/sound/oss/es1370.c
index 8538085086e7..ae55c536613a 100644
--- a/sound/oss/es1370.c
+++ b/sound/oss/es1370.c
@@ -2779,7 +2779,7 @@ static struct pci_driver es1370_driver = {
static int __init init_es1370(void)
{
printk(KERN_INFO "es1370: version v0.38 time " __TIME__ " " __DATE__ "\n");
- return pci_module_init(&es1370_driver);
+ return pci_register_driver(&es1370_driver);
}
static void __exit cleanup_es1370(void)
diff --git a/sound/oss/es1371.c b/sound/oss/es1371.c
index 12a56d5ab498..5c697f162579 100644
--- a/sound/oss/es1371.c
+++ b/sound/oss/es1371.c
@@ -3090,7 +3090,7 @@ static struct pci_driver es1371_driver = {
static int __init init_es1371(void)
{
printk(KERN_INFO PFX "version v0.32 time " __TIME__ " " __DATE__ "\n");
- return pci_module_init(&es1371_driver);
+ return pci_register_driver(&es1371_driver);
}
static void __exit cleanup_es1371(void)
diff --git a/sound/oss/ite8172.c b/sound/oss/ite8172.c
index 26e5944b6ba8..8fd2f9a9e668 100644
--- a/sound/oss/ite8172.c
+++ b/sound/oss/ite8172.c
@@ -2206,7 +2206,7 @@ static struct pci_driver it8172_driver = {
static int __init init_it8172(void)
{
info("version v0.5 time " __TIME__ " " __DATE__);
- return pci_module_init(&it8172_driver);
+ return pci_register_driver(&it8172_driver);
}
static void __exit cleanup_it8172(void)
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
index 808c5ef969be..2835a7c038ef 100644
--- a/sound/oss/kahlua.c
+++ b/sound/oss/kahlua.c
@@ -218,7 +218,7 @@ static struct pci_driver kahlua_driver = {
static int __init kahlua_init_module(void)
{
printk(KERN_INFO "Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc\n");
- return pci_module_init(&kahlua_driver);
+ return pci_register_driver(&kahlua_driver);
}
static void __devexit kahlua_cleanup_module(void)
diff --git a/sound/oss/maestro.c b/sound/oss/maestro.c
index f9ac5b16f61a..d4b569acf764 100644
--- a/sound/oss/maestro.c
+++ b/sound/oss/maestro.c
@@ -3624,7 +3624,7 @@ static int __init init_maestro(void)
{
int rc;
- rc = pci_module_init(&maestro_pci_driver);
+ rc = pci_register_driver(&maestro_pci_driver);
if (rc < 0)
return rc;
diff --git a/sound/oss/nec_vrc5477.c b/sound/oss/nec_vrc5477.c
index 9ac4bf7e1e89..fbb9170e8e0a 100644
--- a/sound/oss/nec_vrc5477.c
+++ b/sound/oss/nec_vrc5477.c
@@ -2045,7 +2045,7 @@ static struct pci_driver vrc5477_ac97_driver = {
static int __init init_vrc5477_ac97(void)
{
printk("Vrc5477 AC97 driver: version v0.2 time " __TIME__ " " __DATE__ " by Jun Sun\n");
- return pci_module_init(&vrc5477_ac97_driver);
+ return pci_register_driver(&vrc5477_ac97_driver);
}
static void __exit cleanup_vrc5477_ac97(void)
diff --git a/sound/oss/nm256_audio.c b/sound/oss/nm256_audio.c
index 42d8f05689c2..7de079b202f2 100644
--- a/sound/oss/nm256_audio.c
+++ b/sound/oss/nm256_audio.c
@@ -1644,7 +1644,7 @@ module_param(force_load, bool, 0);
static int __init do_init_nm256(void)
{
printk (KERN_INFO "NeoMagic 256AV/256ZX audio driver, version 1.1p\n");
- return pci_module_init(&nm256_pci_driver);
+ return pci_register_driver(&nm256_pci_driver);
}
static void __exit cleanup_nm256 (void)
diff --git a/sound/oss/rme96xx.c b/sound/oss/rme96xx.c
index 318dc51009fe..faa0b7919b65 100644
--- a/sound/oss/rme96xx.c
+++ b/sound/oss/rme96xx.c
@@ -1095,7 +1095,7 @@ static int __init init_rme96xx(void)
devices = ((devices-1) & RME96xx_MASK_DEVS) + 1;
printk(KERN_INFO RME_MESS" reserving %d dsp device(s)\n",devices);
numcards = 0;
- return pci_module_init(&rme96xx_driver);
+ return pci_register_driver(&rme96xx_driver);
}
static void __exit cleanup_rme96xx(void)
diff --git a/sound/oss/sonicvibes.c b/sound/oss/sonicvibes.c
index 17d0e461f8d8..71b05e2f6977 100644
--- a/sound/oss/sonicvibes.c
+++ b/sound/oss/sonicvibes.c
@@ -2765,7 +2765,7 @@ static int __init init_sonicvibes(void)
if (!(wavetable_mem = __get_free_pages(GFP_KERNEL, 20-PAGE_SHIFT)))
printk(KERN_INFO "sv: cannot allocate 1MB of contiguous nonpageable memory for wavetable data\n");
#endif
- return pci_module_init(&sv_driver);
+ return pci_register_driver(&sv_driver);
}
static void __exit cleanup_sonicvibes(void)
diff --git a/sound/oss/ymfpci.c b/sound/oss/ymfpci.c
index 8dae59bd05a2..f8bd72e46f57 100644
--- a/sound/oss/ymfpci.c
+++ b/sound/oss/ymfpci.c
@@ -2680,7 +2680,7 @@ static struct pci_driver ymfpci_driver = {
static int __init ymf_init_module(void)
{
- return pci_module_init(&ymfpci_driver);
+ return pci_register_driver(&ymfpci_driver);
}
static void __exit ymf_cleanup_module (void)