diff options
| -rw-r--r-- | drivers/spi/spi-bcm2835aux.c | 25 |
1 files changed, 14 insertions, 11 deletions
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 99414319001a..056a8e2892e0 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -36,6 +36,12 @@ #include <linux/spi/spi.h> #include <linux/spinlock.h> +/* define polling limits */ +unsigned int polling_limit_us = 30; +module_param(polling_limit_us, uint, 0664); +MODULE_PARM_DESC(polling_limit_us, + "time in us to run a transfer in polling mode - if zero no polling is used\n"); + /* * spi register defines * @@ -88,10 +94,6 @@ #define BCM2835_AUX_SPI_STAT_BUSY 0x00000040 #define BCM2835_AUX_SPI_STAT_BITCOUNT 0x0000003F -/* timeout values */ -#define BCM2835_AUX_SPI_POLLING_LIMIT_US 30 -#define BCM2835_AUX_SPI_POLLING_JIFFIES 2 - struct bcm2835aux_spi { void __iomem *regs; struct clk *clk; @@ -269,8 +271,8 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master, bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]); bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]); - /* set the timeout */ - timeout = jiffies + BCM2835_AUX_SPI_POLLING_JIFFIES; + /* set the timeout to at least 2 jiffies */ + timeout = jiffies + 2 + HZ * polling_limit_us / 1000000; /* loop until finished the transfer */ while (bs->rx_len) { @@ -299,8 +301,8 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, struct spi_transfer *tfr) { struct bcm2835aux_spi *bs = spi_master_get_devdata(master); - unsigned long spi_hz, clk_hz, speed; - unsigned long spi_used_hz; + unsigned long spi_hz, clk_hz, speed, spi_used_hz; + unsigned long hz_per_byte, byte_limit; /* calculate the registers to handle * @@ -344,14 +346,15 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, * of Hz per byte per polling limit. E.g., we can transfer 1 byte in * 30 µs per 300,000 Hz of bus clock. */ -#define HZ_PER_BYTE ((9 * 1000000) / BCM2835_AUX_SPI_POLLING_LIMIT_US) + hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0; + byte_limit = hz_per_byte ? spi_used_hz / hz_per_byte : 1; + /* run in polling mode for short transfers */ - if (tfr->len < spi_used_hz / HZ_PER_BYTE) + if (tfr->len < byte_limit) return bcm2835aux_spi_transfer_one_poll(master, spi, tfr); /* run in interrupt mode for all others */ return bcm2835aux_spi_transfer_one_irq(master, spi, tfr); -#undef HZ_PER_BYTE } static int bcm2835aux_spi_prepare_message(struct spi_master *master, |