diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/ti/dpll.txt | 75 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock.h | 164 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock3xxx.h | 2 | ||||
| -rw-r--r-- | drivers/clk/ti/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/ti/dpll.c | 558 | ||||
| -rw-r--r-- | include/linux/clk/ti.h | 172 |
6 files changed, 807 insertions, 165 deletions
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt new file mode 100644 index 000000000000..30bfdb7c9f18 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -0,0 +1,75 @@ +Binding for Texas Instruments DPLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped DPLL with usually two selectable input clocks +(reference clock and bypass clock), with digital phase locked +loop logic for multiplying the input clock to a desired output +clock. This clock also typically supports different operation +modes (locked, low power stop etc.) This binding has several +sub-types, which effectively result in slightly different setup +for the actual DPLL clock. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of: + "ti,omap3-dpll-clock", + "ti,omap3-dpll-core-clock", + "ti,omap3-dpll-per-clock", + "ti,omap3-dpll-per-j-type-clock", + "ti,omap4-dpll-clock", + "ti,omap4-dpll-x2-clock", + "ti,omap4-dpll-core-clock", + "ti,omap4-dpll-m4xen-clock", + "ti,omap4-dpll-j-type-clock", + "ti,am3-dpll-no-gate-clock", + "ti,am3-dpll-j-type-clock", + "ti,am3-dpll-no-gate-j-type-clock", + "ti,am3-dpll-clock", + "ti,am3-dpll-core-clock", + "ti,am3-dpll-x2-clock", + +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks, first entry lists reference clock + and second entry bypass clock +- reg : offsets for the register set for controlling the DPLL. + Registers are listed in following order: + "control" - contains the control register base address + "idlest" - contains the idle status register base address + "mult-div1" - contains the multiplier / divider register base address + "autoidle" - contains the autoidle register base address (optional) + ti,am3-* dpll types do not have autoidle register + +Optional properties: +- DPLL mode setting - defining any one or more of the following overrides + default setting. + - ti,low-power-stop : DPLL supports low power stop mode, gating output + - ti,low-power-bypass : DPLL output matches rate of parent bypass clock + - ti,lock : DPLL locks in programmed rate + +Examples: + dpll_core_ck: dpll_core_ck@44e00490 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x490>, <0x45c>, <0x488>, <0x468>; + }; + + dpll2_ck: dpll2_ck@48004004 { + #clock-cells = <0>; + compatible = "ti,omap3-dpll-clock"; + clocks = <&sys_ck>, <&dpll2_fck>; + ti,low-power-stop; + ti,low-power-bypass; + ti,lock; + reg = <0x4>, <0x24>, <0x34>, <0x40>; + }; + + dpll_core_ck: dpll_core_ck@44e00490 { + #clock-cells = <0>; + compatible = "ti,am3-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x90>, <0x5c>, <0x68>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 82916cc82c92..b345f3ea8617 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -21,6 +21,7 @@ #include <linux/clkdev.h> #include <linux/clk-provider.h> +#include <linux/clk/ti.h> struct omap_clk { u16 cpu; @@ -37,7 +38,6 @@ struct omap_clk { } struct clockdomain; -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ static struct clk _name = { \ @@ -178,141 +178,6 @@ struct clksel { const struct clksel_rate *rates; }; -/** - * struct dpll_data - DPLL registers and integration data - * @mult_div1_reg: register containing the DPLL M and N bitfields - * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg - * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg - * @clk_bypass: struct clk pointer to the clock's bypass clock input - * @clk_ref: struct clk pointer to the clock's reference clock input - * @control_reg: register containing the DPLL mode bitfield - * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() - * @last_rounded_m4xen: cache of the last M4X result of - * omap4_dpll_regm4xen_round_rate() - * @last_rounded_lpmode: cache of the last lpmode result of - * omap4_dpll_lpmode_recalc() - * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() - * @min_divider: minimum valid non-bypass divider value (actual) - * @max_divider: maximum valid non-bypass divider value (actual) - * @modes: possible values of @enable_mask - * @autoidle_reg: register containing the DPLL autoidle mode bitfield - * @idlest_reg: register containing the DPLL idle status bitfield - * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg - * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg - * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg - * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg - * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg - * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg - * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs - * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs - * @flags: DPLL type/features (see below) - * - * Possible values for @flags: - * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) - * - * @freqsel_mask is only used on the OMAP34xx family and AM35xx. - * - * XXX Some DPLLs have multiple bypass inputs, so it's not technically - * correct to only have one @clk_bypass pointer. - * - * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, - * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a different structure, so that the runtime-fixed data - * can be placed into read-only space. - */ -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u8 last_rounded_m4xen; - u8 last_rounded_lpmode; - u16 max_multiplier; - u8 last_rounded_n; - u8 min_divider; - u16 max_divider; - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u32 dco_mask; - u32 sddiv_mask; - u32 lpmode_mask; - u32 m4xen_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - u8 flags; -}; - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk_hw_omap - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @flags: see "struct clk.flags possibilities" above - * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock - * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock - * @clkdm_name: clockdomain name that this clock is contained in - * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - */ - -struct clk_hw_omap_ops; - -struct clk_hw_omap { - struct clk_hw hw; - struct list_head node; - unsigned long fixed_rate; - u8 fixed_div; - void __iomem *enable_reg; - u8 enable_bit; - u8 flags; - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; - const struct clk_hw_omap_ops *ops; -}; - struct clk_hw_omap_ops { void (*find_idlest)(struct clk_hw_omap *oclk, void __iomem **idlest_reg, @@ -348,36 +213,13 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, #define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP4XXX_EN_DPLL_LOCKED 0x7 -/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ -#define DPLL_LOW_POWER_STOP 0x1 -#define DPLL_LOW_POWER_BYPASS 0x5 -#define DPLL_LOCKED 0x7 - -/* DPLL Type and DCO Selection Flags */ -#define DPLL_J_TYPE 0x1 - -long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate); -unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); -int omap3_noncore_dpll_enable(struct clk_hw *hw); -void omap3_noncore_dpll_disable(struct clk_hw *hw); -int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate); u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); void omap3_dpll_allow_idle(struct clk_hw_omap *clk); void omap3_dpll_deny_idle(struct clk_hw_omap *clk); -unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, - unsigned long parent_rate); int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk); void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); -unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, - unsigned long parent_rate); -long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, - unsigned long target_rate, - unsigned long *parent_rate); -void omap2_init_clk_clkdm(struct clk_hw *clk); void __init omap2_clk_disable_clkdm_control(void); /* clkt_clksel.c public functions */ @@ -396,7 +238,6 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val); extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk); extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); -u8 omap2_init_dpll_parent(struct clk_hw *hw); unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); int omap2_dflt_clk_enable(struct clk_hw *hw); @@ -408,7 +249,6 @@ void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val); -void omap2_init_clk_hw_omap_clocks(struct clk *clk); int omap2_clk_enable_autoidle_all(void); int omap2_clk_disable_autoidle_all(void); int omap2_clk_allow_idle(struct clk *clk); @@ -433,10 +273,8 @@ extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; extern struct clk dummy_ck; -extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_iclk_wait; extern const struct clk_hw_omap_ops clkhwops_wait; -extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_iclk; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h index 8cd4b0a882ae..dab90e281aeb 100644 --- a/arch/arm/mach-omap2/clock3xxx.h +++ b/arch/arm/mach-omap2/clock3xxx.h @@ -9,8 +9,6 @@ #define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H int omap3xxx_clk_init(void); -int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, - unsigned long parent_rate); int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate, unsigned long parent_rate); void omap3_clk_lock_dpll5(void); diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 1825f7f4bdc0..3dbb78dc9fca 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,3 +1,4 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o +clk-common = dpll.o endif diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c new file mode 100644 index 000000000000..7e498a44f97d --- /dev/null +++ b/drivers/clk/ti/dpll.c @@ -0,0 +1,558 @@ +/* + * OMAP DPLL clock support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo <t-kristo@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk/ti.h> + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#define DPLL_HAS_AUTOIDLE 0x1 + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static const struct clk_ops dpll_m4xen_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap4_dpll_regm4xen_recalc, + .round_rate = &omap4_dpll_regm4xen_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .get_parent = &omap2_init_dpll_parent, +}; +#endif + +static const struct clk_ops dpll_core_ck_ops = { + .recalc_rate = &omap3_dpll_recalc, + .get_parent = &omap2_init_dpll_parent, +}; + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, +}; +#endif + +static const struct clk_ops dpll_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .get_parent = &omap2_init_dpll_parent, +}; + +static const struct clk_ops dpll_no_gate_ck_ops = { + .recalc_rate = &omap3_dpll_recalc, + .get_parent = &omap2_init_dpll_parent, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, +}; + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .set_rate = &omap3_noncore_dpll_set_rate, + .round_rate = &omap2_dpll_round_rate, +}; + +static const struct clk_ops omap3_dpll_per_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .set_rate = &omap3_dpll4_set_rate, + .round_rate = &omap2_dpll_round_rate, +}; +#endif + +static const struct clk_ops dpll_x2_ck_ops = { + .recalc_rate = &omap3_clkoutx2_recalc, +}; + +/** + * ti_clk_register_dpll - low level registration of a DPLL clock + * @hw: hardware clock definition for the clock + * @node: device node for the clock + * + * Finalizes DPLL registration process. In case a failure (clk-ref or + * clk-bypass is missing), the clock is added to retry list and + * the initialization is retried on later stage. + */ +static void __init ti_clk_register_dpll(struct clk_hw *hw, + struct device_node *node) +{ + struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw); + struct dpll_data *dd = clk_hw->dpll_data; + struct clk *clk; + + dd->clk_ref = of_clk_get(node, 0); + dd->clk_bypass = of_clk_get(node, 1); + + if (IS_ERR(dd->clk_ref) || IS_ERR(dd->clk_bypass)) { + pr_debug("clk-ref or clk-bypass missing for %s, retry later\n", + node->name); + if (!ti_clk_retry_init(node, hw, ti_clk_register_dpll)) + return; + + goto cleanup; + } + + /* register the clock */ + clk = clk_register(NULL, &clk_hw->hw); + + if (!IS_ERR(clk)) { + omap2_init_clk_hw_omap_clocks(clk); + of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(clk_hw->hw.init->parent_names); + kfree(clk_hw->hw.init); + return; + } + +cleanup: + kfree(clk_hw->dpll_data); + kfree(clk_hw->hw.init->parent_names); + kfree(clk_hw->hw.init); + kfree(clk_hw); +} + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) +/** + * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock + * @node: device node for this clock + * @ops: clk_ops for this clock + * @hw_ops: clk_hw_ops for this clock + * + * Initializes a DPLL x 2 clock from device tree data. + */ +static void ti_clk_register_dpll_x2(struct device_node *node, + const struct clk_ops *ops, + const struct clk_hw_omap_ops *hw_ops) +{ + struct clk *clk; + struct clk_init_data init = { NULL }; + struct clk_hw_omap *clk_hw; + const char *name = node->name; + const char *parent_name; + + parent_name = of_clk_get_parent_name(node, 0); + if (!parent_name) { + pr_err("%s must have parent\n", node->name); + return; + } + + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + if (!clk_hw) + return; + + clk_hw->ops = hw_ops; + clk_hw->hw.init = &init; + + init.name = name; + init.ops = ops; + init.parent_names = &parent_name; + init.num_parents = 1; + + /* register the clock */ + clk = clk_register(NULL, &clk_hw->hw); + + if (IS_ERR(clk)) { + kfree(clk_hw); + } else { + omap2_init_clk_hw_omap_clocks(clk); + of_clk_add_provider(node, of_clk_src_simple_get, clk); + } +} +#endif + +/** + * of_ti_dpll_setup - Setup function for OMAP DPLL clocks + * @node: device node containing the DPLL info + * @ops: ops for the DPLL + * @ddt: DPLL data template to use + * @init_flags: flags for controlling init types + * + * Initializes a DPLL clock from device tree data. + */ +static void __init of_ti_dpll_setup(struct device_node *node, + const struct clk_ops *ops, + const struct dpll_data *ddt, + u8 init_flags) +{ + struct clk_hw_omap *clk_hw = NULL; + struct clk_init_data *init = NULL; + const char **parent_names = NULL; + struct dpll_data *dd = NULL; + int i; + u8 dpll_mode = 0; + + dd = kzalloc(sizeof(*dd), GFP_KERNEL); + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + init = kzalloc(sizeof(*init), GFP_KERNEL); + if (!dd || !clk_hw || !init) + goto cleanup; + + memcpy(dd, ddt, sizeof(*dd)); + + clk_hw->dpll_data = dd; + clk_hw->ops = &clkhwops_omap3_dpll; + clk_hw->hw.init = init; + clk_hw->flags = MEMMAP_ADDRESSING; + + init->name = node->name; + init->ops = ops; + + init->num_parents = of_clk_get_parent_count(node); + if (init->num_parents < 1) { + pr_err("%s must have parent(s)\n", node->name); + goto cleanup; + } + + parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL); + if (!parent_names) + goto cleanup; + + for (i = 0; i < init->num_parents; i++) + parent_names[i] = of_clk_get_parent_name(node, i); + + init->parent_names = parent_names; + + dd->control_reg = ti_clk_get_reg_addr(node, 0); + dd->idlest_reg = ti_clk_get_reg_addr(node, 1); + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); + + if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg) + goto cleanup; + + if (init_flags & DPLL_HAS_AUTOIDLE) { + dd->autoidle_reg = ti_clk_get_reg_addr(node, 3); + if (!dd->autoidle_reg) + goto cleanup; + } + + if (of_property_read_bool(node, "ti,low-power-stop")) + dpll_mode |= 1 << DPLL_LOW_POWER_STOP; + + if (of_property_read_bool(node, "ti,low-power-bypass")) + dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS; + + if (of_property_read_bool(node, "ti,lock")) + dpll_mode |= 1 << DPLL_LOCKED; + + if (dpll_mode) + dd->modes = dpll_mode; + + ti_clk_register_dpll(&clk_hw->hw, node); + return; + +cleanup: + kfree(dd); + kfree(parent_names); + kfree(init); + kfree(clk_hw); +} + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node) +{ + ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx); +} +CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", + of_ti_omap4_dpll_x2_setup); +#endif + +#ifdef CONFIG_SOC_AM33XX +static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) +{ + ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL); +} +CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock", + of_ti_am3_dpll_x2_setup); +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static void __init of_ti_omap3_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .freqsel_mask = 0xf0, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock", + of_ti_omap3_dpll_setup); + +static void __init of_ti_omap3_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 16, + .div1_mask = 0x7f << 8, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .freqsel_mask = 0xf0, + }; + + of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock", + of_ti_omap3_core_dpll_setup); + +static void __init of_ti_omap3_per_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1 << 1, + .enable_mask = 0x7 << 16, + .autoidle_mask = 0x7 << 3, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .freqsel_mask = 0xf00000, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock", + of_ti_omap3_per_dpll_setup); + +static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1 << 1, + .enable_mask = 0x7 << 16, + .autoidle_mask = 0x7 << 3, + .mult_mask = 0xfff << 8, + .div1_mask = 0x7f, + .max_multiplier = 4095, + .max_divider = 128, + .min_divider = 1, + .sddiv_mask = 0xff << 24, + .dco_mask = 0xe << 20, + .flags = DPLL_J_TYPE, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock", + of_ti_omap3_per_jtype_dpll_setup); +#endif + +static void __init of_ti_omap4_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", + of_ti_omap4_dpll_setup); + +static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock", + of_ti_omap4_core_dpll_setup); + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .m4xen_mask = 0x800, + .lpmode_mask = 1 << 10, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock", + of_ti_omap4_m4xen_dpll_setup); + +static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0xfff << 8, + .div1_mask = 0xff, + .max_multiplier = 4095, + .max_divider = 256, + .min_divider = 1, + .sddiv_mask = 0xff << 24, + .flags = DPLL_J_TYPE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); +} +CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock", + of_ti_omap4_jtype_dpll_setup); +#endif + +static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); +} +CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock", + of_ti_am3_no_gate_dpll_setup); + +static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 4095, + .max_divider = 256, + .min_divider = 2, + .flags = DPLL_J_TYPE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); +} +CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock", + of_ti_am3_jtype_dpll_setup); + +static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .flags = DPLL_J_TYPE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); +} +CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock, + "ti,am3-dpll-no-gate-j-type-clock", + of_ti_am3_no_gate_jtype_dpll_setup); + +static void __init of_ti_am3_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); +} +CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup); + +static void __init of_ti_am3_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, 0); +} +CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", + of_ti_am3_core_dpll_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index c6eded5eea76..3f9de3973582 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -18,6 +18,153 @@ #include <linux/clkdev.h> /** + * struct dpll_data - DPLL registers and integration data + * @mult_div1_reg: register containing the DPLL M and N bitfields + * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg + * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg + * @clk_bypass: struct clk pointer to the clock's bypass clock input + * @clk_ref: struct clk pointer to the clock's reference clock input + * @control_reg: register containing the DPLL mode bitfield + * @enable_mask: mask of the DPLL mode bitfield in @control_reg + * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @last_rounded_m4xen: cache of the last M4X result of + * omap4_dpll_regm4xen_round_rate() + * @last_rounded_lpmode: cache of the last lpmode result of + * omap4_dpll_lpmode_recalc() + * @max_multiplier: maximum valid non-bypass multiplier value (actual) + * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @min_divider: minimum valid non-bypass divider value (actual) + * @max_divider: maximum valid non-bypass divider value (actual) + * @modes: possible values of @enable_mask + * @autoidle_reg: register containing the DPLL autoidle mode bitfield + * @idlest_reg: register containing the DPLL idle status bitfield + * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg + * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg + * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg + * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg + * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs + * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @flags: DPLL type/features (see below) + * + * Possible values for @flags: + * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) + * + * @freqsel_mask is only used on the OMAP34xx family and AM35xx. + * + * XXX Some DPLLs have multiple bypass inputs, so it's not technically + * correct to only have one @clk_bypass pointer. + * + * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, + * @last_rounded_n) should be separated from the runtime-fixed fields + * and placed into a different structure, so that the runtime-fixed data + * can be placed into read-only space. + */ +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u8 last_rounded_m4xen; + u8 last_rounded_lpmode; + u16 max_multiplier; + u8 last_rounded_n; + u8 min_divider; + u16 max_divider; + u8 modes; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u32 dco_mask; + u32 sddiv_mask; + u32 lpmode_mask; + u32 m4xen_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + u8 flags; +}; + +struct clk_hw_omap_ops; + +/** + * struct clk_hw_omap - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @ops: clock ops for this clock + */ +struct clk_hw_omap { + struct clk_hw hw; + struct list_head node; + unsigned long fixed_rate; + u8 fixed_div; + void __iomem *enable_reg; + u8 enable_bit; + u8 flags; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; + const struct clk_hw_omap_ops *ops; +}; + +/* + * struct clk_hw_omap.flags possibilities + * + * XXX document the rest of the clock flags here + * + * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed + * with 32bit ops, by default OMAP1 uses 16bit ops. + * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support. + * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent + * clock is put to no-idle mode. + * ENABLE_ON_INIT: Clock is enabled on init. + * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0' + * disable. This inverts the behavior making '0' enable and '1' disable. + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) +#define MEMMAP_ADDRESSING (1 << 6) + +/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ +#define DPLL_LOW_POWER_STOP 0x1 +#define DPLL_LOW_POWER_BYPASS 0x5 +#define DPLL_LOCKED 0x7 + +/* DPLL Type and DCO Selection Flags */ +#define DPLL_J_TYPE 0x1 + +/** * struct ti_dt_clk - OMAP DT clock alias declarations * @lk: clock lookup definition * @node_name: clock DT node to map to @@ -68,10 +215,35 @@ struct ti_clk_ll_ops { extern struct ti_clk_ll_ops *ti_clk_ll_ops; +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) + +void omap2_init_clk_hw_omap_clocks(struct clk *clk); +int omap3_noncore_dpll_enable(struct clk_hw *hw); +void omap3_noncore_dpll_disable(struct clk_hw *hw); +int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); +unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, + unsigned long parent_rate); +long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, + unsigned long target_rate, + unsigned long *parent_rate); +u8 omap2_init_dpll_parent(struct clk_hw *hw); +unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); +long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, + unsigned long *parent_rate); +void omap2_init_clk_clkdm(struct clk_hw *clk); +unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); + void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); void ti_dt_clk_init_provider(struct device_node *np, int index); int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, ti_of_clk_init_cb_t func); +extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; + #endif |