summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/xtensa/Kconfig3
-rw-r--r--arch/xtensa/Kconfig.debug10
-rw-r--r--arch/xtensa/boot/.gitignore3
-rw-r--r--arch/xtensa/boot/boot-elf/.gitignore1
-rw-r--r--arch/xtensa/boot/lib/.gitignore3
-rw-r--r--arch/xtensa/boot/lib/Makefile7
-rw-r--r--arch/xtensa/include/asm/bootparam.h2
-rw-r--r--arch/xtensa/include/asm/cmpxchg.h1
-rw-r--r--arch/xtensa/include/asm/delay.h13
-rw-r--r--arch/xtensa/include/asm/ftrace.h17
-rw-r--r--arch/xtensa/include/asm/pgtable.h140
-rw-r--r--arch/xtensa/include/asm/platform.h5
-rw-r--r--arch/xtensa/include/asm/timex.h12
-rw-r--r--arch/xtensa/kernel/.gitignore1
-rw-r--r--arch/xtensa/kernel/Makefile1
-rw-r--r--arch/xtensa/kernel/entry.S16
-rw-r--r--arch/xtensa/kernel/head.S9
-rw-r--r--arch/xtensa/kernel/mcount.S50
-rw-r--r--arch/xtensa/kernel/pci.c10
-rw-r--r--arch/xtensa/kernel/platform.c3
-rw-r--r--arch/xtensa/kernel/setup.c8
-rw-r--r--arch/xtensa/kernel/time.c123
-rw-r--r--arch/xtensa/kernel/xtensa_ksyms.c4
-rw-r--r--arch/xtensa/mm/tlb.c120
-rw-r--r--arch/xtensa/platforms/iss/network.c2
-rw-r--r--arch/xtensa/platforms/iss/simdisk.c4
-rw-r--r--arch/xtensa/platforms/xtfpga/setup.c5
-rw-r--r--arch/xtensa/variants/s6000/delay.c6
-rw-r--r--include/linux/bio.h4
29 files changed, 435 insertions, 148 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 0a1b95f81a32..7ea6451a3a33 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -6,10 +6,12 @@ config XTENSA
select ARCH_WANT_FRAME_POINTERS
select HAVE_IDE
select GENERIC_ATOMIC64
+ select GENERIC_CLOCKEVENTS
select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
+ select GENERIC_SCHED_CLOCK
select MODULES_USE_ELF_RELA
select GENERIC_PCI_IOMAP
select ARCH_WANT_IPC_PARSE_VERSION
@@ -17,6 +19,7 @@ config XTENSA
select CLONE_BACKWARDS
select IRQ_DOMAIN
select HAVE_OPROFILE
+ select HAVE_FUNCTION_TRACER
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
index a34010e0e51c..af7da74d535f 100644
--- a/arch/xtensa/Kconfig.debug
+++ b/arch/xtensa/Kconfig.debug
@@ -2,6 +2,16 @@ menu "Kernel hacking"
source "lib/Kconfig.debug"
+config DEBUG_TLB_SANITY
+ bool "Debug TLB sanity"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on TLB sanity check on each entry to userspace.
+ This check can spot missing TLB invalidation/wrong PTE permissions/
+ premature page freeing.
+
+ If unsure, say N.
+
config LD_NO_RELAX
bool "Disable linker relaxation"
default n
diff --git a/arch/xtensa/boot/.gitignore b/arch/xtensa/boot/.gitignore
new file mode 100644
index 000000000000..be7655998b26
--- /dev/null
+++ b/arch/xtensa/boot/.gitignore
@@ -0,0 +1,3 @@
+uImage
+zImage.redboot
+*.dtb
diff --git a/arch/xtensa/boot/boot-elf/.gitignore b/arch/xtensa/boot/boot-elf/.gitignore
new file mode 100644
index 000000000000..5ff8fbb8561b
--- /dev/null
+++ b/arch/xtensa/boot/boot-elf/.gitignore
@@ -0,0 +1 @@
+boot.lds
diff --git a/arch/xtensa/boot/lib/.gitignore b/arch/xtensa/boot/lib/.gitignore
new file mode 100644
index 000000000000..1629a6167755
--- /dev/null
+++ b/arch/xtensa/boot/lib/.gitignore
@@ -0,0 +1,3 @@
+inffast.c
+inflate.c
+inftrees.c
diff --git a/arch/xtensa/boot/lib/Makefile b/arch/xtensa/boot/lib/Makefile
index ad8952e8a07f..6868f2ca6af8 100644
--- a/arch/xtensa/boot/lib/Makefile
+++ b/arch/xtensa/boot/lib/Makefile
@@ -7,6 +7,13 @@ zlib := inffast.c inflate.c inftrees.c
lib-y += $(zlib:.c=.o) zmem.o
ccflags-y := -Ilib/zlib_inflate
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_inflate.o = -pg
+CFLAGS_REMOVE_zmem.o = -pg
+CFLAGS_REMOVE_inftrees.o = -pg
+CFLAGS_REMOVE_inffast.o = -pg
+endif
+
quiet_cmd_copy_zlib = COPY $@
cmd_copy_zlib = cat $< > $@
diff --git a/arch/xtensa/include/asm/bootparam.h b/arch/xtensa/include/asm/bootparam.h
index 0c25799facab..23392c5630ce 100644
--- a/arch/xtensa/include/asm/bootparam.h
+++ b/arch/xtensa/include/asm/bootparam.h
@@ -20,7 +20,7 @@
#define BP_TAG_COMMAND_LINE 0x1001 /* command line (0-terminated string)*/
#define BP_TAG_INITRD 0x1002 /* ramdisk addr and size (bp_meminfo) */
#define BP_TAG_MEMORY 0x1003 /* memory addr and size (bp_meminfo) */
-#define BP_TAG_SERIAL_BAUSRATE 0x1004 /* baud rate of current console. */
+#define BP_TAG_SERIAL_BAUDRATE 0x1004 /* baud rate of current console. */
#define BP_TAG_SERIAL_PORT 0x1005 /* serial device of current console */
#define BP_TAG_FDT 0x1006 /* flat device tree addr */
diff --git a/arch/xtensa/include/asm/cmpxchg.h b/arch/xtensa/include/asm/cmpxchg.h
index d9ab131bc1aa..370b26f38414 100644
--- a/arch/xtensa/include/asm/cmpxchg.h
+++ b/arch/xtensa/include/asm/cmpxchg.h
@@ -93,6 +93,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
(unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n))
/*
* xchg_u32
diff --git a/arch/xtensa/include/asm/delay.h b/arch/xtensa/include/asm/delay.h
index 61fc5faeb46c..3899610c1dff 100644
--- a/arch/xtensa/include/asm/delay.h
+++ b/arch/xtensa/include/asm/delay.h
@@ -12,7 +12,7 @@
#ifndef _XTENSA_DELAY_H
#define _XTENSA_DELAY_H
-#include <asm/processor.h>
+#include <asm/timex.h>
#include <asm/param.h>
extern unsigned long loops_per_jiffy;
@@ -24,24 +24,17 @@ static inline void __delay(unsigned long loops)
: "=r" (loops) : "0" (loops));
}
-static __inline__ u32 xtensa_get_ccount(void)
-{
- u32 ccount;
- asm volatile ("rsr %0, ccount\n" : "=r" (ccount));
- return ccount;
-}
-
/* For SMP/NUMA systems, change boot_cpu_data to something like
* local_cpu_data->... where local_cpu_data points to the current
* cpu. */
static __inline__ void udelay (unsigned long usecs)
{
- unsigned long start = xtensa_get_ccount();
+ unsigned long start = get_ccount();
unsigned long cycles = usecs * (loops_per_jiffy / (1000000UL / HZ));
/* Note: all variables are unsigned (can wrap around)! */
- while (((unsigned long)xtensa_get_ccount()) - start < cycles)
+ while (((unsigned long)get_ccount()) - start < cycles)
;
}
diff --git a/arch/xtensa/include/asm/ftrace.h b/arch/xtensa/include/asm/ftrace.h
index 36dc7a684397..73cc3f482304 100644
--- a/arch/xtensa/include/asm/ftrace.h
+++ b/arch/xtensa/include/asm/ftrace.h
@@ -13,6 +13,7 @@
#include <asm/processor.h>
#define HAVE_ARCH_CALLER_ADDR
+#ifndef __ASSEMBLY__
#define CALLER_ADDR0 ({ unsigned long a0, a1; \
__asm__ __volatile__ ( \
"mov %0, a0\n" \
@@ -24,10 +25,22 @@ extern unsigned long return_address(unsigned level);
#define CALLER_ADDR1 return_address(1)
#define CALLER_ADDR2 return_address(2)
#define CALLER_ADDR3 return_address(3)
-#else
+#else /* CONFIG_FRAME_POINTER */
#define CALLER_ADDR1 (0)
#define CALLER_ADDR2 (0)
#define CALLER_ADDR3 (0)
-#endif
+#endif /* CONFIG_FRAME_POINTER */
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_ADDR ((unsigned long)(_mcount))
+#define MCOUNT_INSN_SIZE 3
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#define mcount _mcount
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_FUNCTION_TRACER */
#endif /* _XTENSA_FTRACE_H */
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index 8f017eb309bd..0fdf5d043f82 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -5,7 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Copyright (C) 2001 - 2007 Tensilica Inc.
+ * Copyright (C) 2001 - 2013 Tensilica Inc.
*/
#ifndef _XTENSA_PGTABLE_H
@@ -64,41 +64,82 @@
* Virtual memory area. We keep a distance to other memory regions to be
* on the safe side. We also use this area for cache aliasing.
*/
-
#define VMALLOC_START 0xC0000000
#define VMALLOC_END 0xC7FEFFFF
#define TLBTEMP_BASE_1 0xC7FF0000
#define TLBTEMP_BASE_2 0xC7FF8000
/*
- * Xtensa Linux config PTE layout (when present):
- * 31-12: PPN
- * 11-6: Software
- * 5-4: RING
- * 3-0: CA
+ * For the Xtensa architecture, the PTE layout is as follows:
+ *
+ * 31------12 11 10-9 8-6 5-4 3-2 1-0
+ * +-----------------------------------------+
+ * | | Software | HARDWARE |
+ * | PPN | ADW | RI |Attribute|
+ * +-----------------------------------------+
+ * pte_none | MBZ | 01 | 11 | 00 |
+ * +-----------------------------------------+
+ * present | PPN | 0 | 00 | ADW | RI | CA | wx |
+ * +- - - - - - - - - - - - - - - - - - - - -+
+ * (PAGE_NONE)| PPN | 0 | 00 | ADW | 01 | 11 | 11 |
+ * +-----------------------------------------+
+ * swap | index | type | 01 | 11 | 00 |
+ * +- - - - - - - - - - - - - - - - - - - - -+
+ * file | file offset | 01 | 11 | 10 |
+ * +-----------------------------------------+
+ *
+ * For T1050 hardware and earlier the layout differs for present and (PAGE_NONE)
+ * +-----------------------------------------+
+ * present | PPN | 0 | 00 | ADW | RI | CA | w1 |
+ * +-----------------------------------------+
+ * (PAGE_NONE)| PPN | 0 | 00 | ADW | 01 | 01 | 00 |
+ * +-----------------------------------------+
*
- * Similar to the Alpha and MIPS ports, we need to keep track of the ref
- * and mod bits in software. We have a software "you can read
- * from this page" bit, and a hardware one which actually lets the
- * process read from the page. On the same token we have a software
- * writable bit and the real hardware one which actually lets the
- * process write to the page.
+ * Legend:
+ * PPN Physical Page Number
+ * ADW software: accessed (young) / dirty / writable
+ * RI ring (0=privileged, 1=user, 2 and 3 are unused)
+ * CA cache attribute: 00 bypass, 01 writeback, 10 writethrough
+ * (11 is invalid and used to mark pages that are not present)
+ * w page is writable (hw)
+ * x page is executable (hw)
+ * index swap offset / PAGE_SIZE (bit 11-31: 21 bits -> 8 GB)
+ * (note that the index is always non-zero)
+ * type swap type (5 bits -> 32 types)
+ * file offset 26-bit offset into the file, in increments of PAGE_SIZE
*
- * See further below for PTE layout for swapped-out pages.
+ * Notes:
+ * - (PROT_NONE) is a special case of 'present' but causes an exception for
+ * any access (read, write, and execute).
+ * - 'multihit-exception' has the highest priority of all MMU exceptions,
+ * so the ring must be set to 'RING_USER' even for 'non-present' pages.
+ * - on older hardware, the exectuable flag was not supported and
+ * used as a 'valid' flag, so it needs to be always set.
+ * - we need to keep track of certain flags in software (dirty and young)
+ * to do this, we use write exceptions and have a separate software w-flag.
+ * - attribute value 1101 (and 1111 on T1050 and earlier) is reserved
*/
+#define _PAGE_ATTRIB_MASK 0xf
+
#define _PAGE_HW_EXEC (1<<0) /* hardware: page is executable */
#define _PAGE_HW_WRITE (1<<1) /* hardware: page is writable */
-#define _PAGE_FILE (1<<1) /* non-linear mapping, if !present */
-#define _PAGE_PROTNONE (3<<0) /* special case for VM_PROT_NONE */
-
-/* None of these cache modes include MP coherency: */
#define _PAGE_CA_BYPASS (0<<2) /* bypass, non-speculative */
#define _PAGE_CA_WB (1<<2) /* write-back */
#define _PAGE_CA_WT (2<<2) /* write-through */
#define _PAGE_CA_MASK (3<<2)
-#define _PAGE_INVALID (3<<2)
+#define _PAGE_CA_INVALID (3<<2)
+
+/* We use invalid attribute values to distinguish special pte entries */
+#if XCHAL_HW_VERSION_MAJOR < 2000
+#define _PAGE_HW_VALID 0x01 /* older HW needed this bit set */
+#define _PAGE_NONE 0x04
+#else
+#define _PAGE_HW_VALID 0x00
+#define _PAGE_NONE 0x0f
+#endif
+#define _PAGE_FILE (1<<1) /* file mapped page, only if !present */
#define _PAGE_USER (1<<4) /* user access (ring=1) */
@@ -108,19 +149,12 @@
#define _PAGE_DIRTY (1<<7) /* software: page dirty */
#define _PAGE_ACCESSED (1<<8) /* software: page accessed (read) */
-/* On older HW revisions, we always have to set bit 0 */
-#if XCHAL_HW_VERSION_MAJOR < 2000
-# define _PAGE_VALID (1<<0)
-#else
-# define _PAGE_VALID 0
-#endif
-
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _PAGE_PRESENT (_PAGE_VALID | _PAGE_CA_WB | _PAGE_ACCESSED)
-
#ifdef CONFIG_MMU
-#define PAGE_NONE __pgprot(_PAGE_INVALID | _PAGE_USER | _PAGE_PROTNONE)
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_PRESENT (_PAGE_HW_VALID | _PAGE_CA_WB | _PAGE_ACCESSED)
+
+#define PAGE_NONE __pgprot(_PAGE_NONE | _PAGE_USER)
#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER)
#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC)
#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER)
@@ -132,9 +166,9 @@
#define PAGE_KERNEL_EXEC __pgprot(_PAGE_PRESENT|_PAGE_HW_WRITE|_PAGE_HW_EXEC)
#if (DCACHE_WAY_SIZE > PAGE_SIZE)
-# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED)
+# define _PAGE_DIRECTORY (_PAGE_HW_VALID | _PAGE_ACCESSED | _PAGE_CA_BYPASS)
#else
-# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_CA_WB)
+# define _PAGE_DIRECTORY (_PAGE_HW_VALID | _PAGE_ACCESSED | _PAGE_CA_WB)
#endif
#else /* no mmu */
@@ -202,12 +236,16 @@ static inline void pgtable_cache_init(void) { }
/*
* pte status.
*/
-#define pte_none(pte) (pte_val(pte) == _PAGE_INVALID)
-#define pte_present(pte) \
- (((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_INVALID) \
- || ((pte_val(pte) & _PAGE_PROTNONE) == _PAGE_PROTNONE))
+# define pte_none(pte) (pte_val(pte) == (_PAGE_CA_INVALID | _PAGE_USER))
+#if XCHAL_HW_VERSION_MAJOR < 2000
+# define pte_present(pte) ((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_CA_INVALID)
+#else
+# define pte_present(pte) \
+ (((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_CA_INVALID) \
+ || ((pte_val(pte) & _PAGE_ATTRIB_MASK) == _PAGE_NONE))
+#endif
#define pte_clear(mm,addr,ptep) \
- do { update_pte(ptep, __pte(_PAGE_INVALID)); } while(0)
+ do { update_pte(ptep, __pte(_PAGE_CA_INVALID | _PAGE_USER)); } while (0)
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd) & PAGE_MASK)
@@ -328,35 +366,23 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
/*
- * Encode and decode a swap entry.
- *
- * Format of swap pte:
- * bit 0 MBZ
- * bit 1 page-file (must be zero)
- * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID)
- * bits 4 - 5 ring protection (must be 01: _PAGE_USER)
- * bits 6 - 10 swap type (5 bits -> 32 types)
- * bits 11 - 31 swap offset / PAGE_SIZE (21 bits -> 8GB)
-
- * Format of file pte:
- * bit 0 MBZ
- * bit 1 page-file (must be one: _PAGE_FILE)
- * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID)
- * bits 4 - 5 ring protection (must be 01: _PAGE_USER)
- * bits 6 - 31 file offset / PAGE_SIZE
+ * Encode and decode a swap and file entry.
*/
+#define SWP_TYPE_BITS 5
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS)
#define __swp_type(entry) (((entry).val >> 6) & 0x1f)
#define __swp_offset(entry) ((entry).val >> 11)
#define __swp_entry(type,offs) \
- ((swp_entry_t) {((type) << 6) | ((offs) << 11) | _PAGE_INVALID})
+ ((swp_entry_t){((type) << 6) | ((offs) << 11) | \
+ _PAGE_CA_INVALID | _PAGE_USER})
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-#define PTE_FILE_MAX_BITS 28
-#define pte_to_pgoff(pte) (pte_val(pte) >> 4)
+#define PTE_FILE_MAX_BITS 26
+#define pte_to_pgoff(pte) (pte_val(pte) >> 6)
#define pgoff_to_pte(off) \
- ((pte_t) { ((off) << 4) | _PAGE_INVALID | _PAGE_FILE })
+ ((pte_t) { ((off) << 6) | _PAGE_CA_INVALID | _PAGE_FILE | _PAGE_USER })
#endif /* !defined (__ASSEMBLY__) */
diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h
index ec098b68fb9a..32e98f27ce97 100644
--- a/arch/xtensa/include/asm/platform.h
+++ b/arch/xtensa/include/asm/platform.h
@@ -30,11 +30,6 @@ extern void platform_init(bp_tag_t*);
extern void platform_setup (char **);
/*
- * platform_init_irq is called from init_IRQ.
- */
-extern void platform_init_irq (void);
-
-/*
* platform_restart is called to restart the system.
*/
extern void platform_restart (void);
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index 3d35e5d0367e..69f901713fb6 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -35,19 +35,11 @@
# error "Bad timer number for Linux configurations!"
#endif
-#define LINUX_TIMER_MASK (1L << LINUX_TIMER_INT)
-
-#define CLOCK_TICK_RATE 1193180 /* (everyone is using this value) */
-#define CLOCK_TICK_FACTOR 20 /* Factor of both 10^6 and CLOCK_TICK_RATE */
-
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
-extern unsigned long ccount_per_jiffy;
-extern unsigned long nsec_per_ccount;
-#define CCOUNT_PER_JIFFY ccount_per_jiffy
-#define NSEC_PER_CCOUNT nsec_per_ccount
+extern unsigned long ccount_freq;
+#define CCOUNT_PER_JIFFY (ccount_freq / HZ)
#else
#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
-#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
#endif
diff --git a/arch/xtensa/kernel/.gitignore b/arch/xtensa/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/xtensa/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 1e7fc87a94bb..f90265ec1ccc 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -11,6 +11,7 @@ obj-y := align.o coprocessor.o entry.o irq.o pci-dma.o platform.o process.o \
obj-$(CONFIG_KGDB) += xtensa-stub.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
+obj-$(CONFIG_FUNCTION_TRACER) += mcount.o
AFLAGS_head.o += -mtext-section-literals
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 5082507d5631..9298742f0fd0 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -458,7 +458,7 @@ common_exception_return:
_bbsi.l a4, TIF_NEED_RESCHED, 3f
_bbsi.l a4, TIF_NOTIFY_RESUME, 2f
- _bbci.l a4, TIF_SIGPENDING, 4f
+ _bbci.l a4, TIF_SIGPENDING, 5f
2: l32i a4, a1, PT_DEPC
bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f
@@ -476,6 +476,13 @@ common_exception_return:
callx4 a4
j 1b
+5:
+#ifdef CONFIG_DEBUG_TLB_SANITY
+ l32i a4, a1, PT_DEPC
+ bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f
+ movi a4, check_tlb_sanity
+ callx4 a4
+#endif
4: /* Restore optional registers. */
load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
@@ -1792,10 +1799,15 @@ ENTRY(fast_store_prohibited)
l32i a0, a0, 0
beqz a0, 2f
- /* Note that we assume _PAGE_WRITABLE_BIT is only set if pte is valid.*/
+ /*
+ * Note that we test _PAGE_WRITABLE_BIT only if PTE is present
+ * and is not PAGE_NONE. See pgtable.h for possible PTE layouts.
+ */
_PTE_OFFSET(a0, a1, a4)
l32i a4, a0, 0 # read pteval
+ movi a1, _PAGE_CA_INVALID
+ ball a4, a1, 2f
bbci.l a4, _PAGE_WRITABLE_BIT, 2f
movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index ef12c0e6fa25..7d740ebbe198 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -68,6 +68,15 @@ _SetupMMU:
#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
initialize_mmu
+#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+ rsr a2, excsave1
+ movi a3, 0x08000000
+ bgeu a2, a3, 1f
+ movi a3, 0xd0000000
+ add a2, a2, a3
+ wsr a2, excsave1
+1:
+#endif
#endif
.end no-absolute-literals
diff --git a/arch/xtensa/kernel/mcount.S b/arch/xtensa/kernel/mcount.S
new file mode 100644
index 000000000000..0eeda2e4a25e
--- /dev/null
+++ b/arch/xtensa/kernel/mcount.S
@@ -0,0 +1,50 @@
+/*
+ * arch/xtensa/kernel/mcount.S
+ *
+ * Xtensa specific mcount support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Tensilica Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ftrace.h>
+
+/*
+ * Entry condition:
+ *
+ * a2: a0 of the caller
+ */
+
+ENTRY(_mcount)
+
+ entry a1, 16
+
+ movi a4, ftrace_trace_function
+ l32i a4, a4, 0
+ movi a3, ftrace_stub
+ bne a3, a4, 1f
+ retw
+
+1: xor a7, a2, a1
+ movi a3, 0x3fffffff
+ and a7, a7, a3
+ xor a7, a7, a1
+
+ xor a6, a0, a1
+ and a6, a6, a3
+ xor a6, a6, a1
+ addi a6, a6, -MCOUNT_INSN_SIZE
+ callx4 a4
+
+ retw
+
+ENDPROC(_mcount)
+
+ENTRY(ftrace_stub)
+ entry a1, 16
+ retw
+ENDPROC(ftrace_stub)
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index 126c18839409..5b3403388d7f 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -77,9 +77,9 @@ pcibios_align_resource(void *data, const struct resource *res,
if (res->flags & IORESOURCE_IO) {
if (size > 0x100) {
- printk(KERN_ERR "PCI: I/O Region %s/%d too large"
- " (%ld bytes)\n", pci_name(dev),
- dev->resource - res, size);
+ pr_err("PCI: I/O Region %s/%d too large (%u bytes)\n",
+ pci_name(dev), dev->resource - res,
+ size);
}
if (start & 0x300)
@@ -174,7 +174,7 @@ static int __init pcibios_init(void)
struct pci_controller *pci_ctrl;
struct list_head resources;
struct pci_bus *bus;
- int next_busno = 0, i;
+ int next_busno = 0;
printk("PCI: Probing PCI hardware\n");
@@ -197,7 +197,7 @@ static int __init pcibios_init(void)
subsys_initcall(pcibios_init);
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
{
if (bus->parent) {
/* This is a subordinate bridge */
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index 2bd6c351f37c..1cf008284dd2 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -29,7 +29,6 @@
*/
_F(void, setup, (char** cmd), { });
-_F(void, init_irq, (void), { });
_F(void, restart, (void), { while(1); });
_F(void, halt, (void), { while(1); });
_F(void, power_off, (void), { while(1); });
@@ -42,6 +41,6 @@ _F(void, pcibios_init, (void), { });
_F(void, calibrate_ccount, (void),
{
pr_err("ERROR: Cannot calibrate cpu frequency! Assuming 10MHz.\n");
- ccount_per_jiffy = 10 * (1000000UL/HZ);
+ ccount_freq = 10 * 1000000UL;
});
#endif
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 6dd25ecde3f5..42a8bba0b0ea 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -152,8 +152,8 @@ static int __init parse_tag_initrd(const bp_tag_t* tag)
{
meminfo_t* mi;
mi = (meminfo_t*)(tag->data);
- initrd_start = (void*)(mi->start);
- initrd_end = (void*)(mi->end);
+ initrd_start = __va(mi->start);
+ initrd_end = __va(mi->end);
return 0;
}
@@ -164,7 +164,7 @@ __tagtable(BP_TAG_INITRD, parse_tag_initrd);
static int __init parse_tag_fdt(const bp_tag_t *tag)
{
- dtb_start = (void *)(tag->data[0]);
+ dtb_start = __va(tag->data[0]);
return 0;
}
@@ -256,7 +256,7 @@ void __init early_init_devtree(void *params)
static void __init copy_devtree(void)
{
void *alloc = early_init_dt_alloc_memory_arch(
- be32_to_cpu(initial_boot_params->totalsize), 0);
+ be32_to_cpu(initial_boot_params->totalsize), 8);
if (alloc) {
memcpy(alloc, initial_boot_params,
be32_to_cpu(initial_boot_params->totalsize));
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index ffb474104311..bdbb17312526 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -16,6 +16,7 @@
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -23,13 +24,13 @@
#include <linux/profile.h>
#include <linux/delay.h>
#include <linux/irqdomain.h>
+#include <linux/sched_clock.h>
#include <asm/timex.h>
#include <asm/platform.h>
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
-unsigned long ccount_per_jiffy; /* per 1/HZ */
-unsigned long nsec_per_ccount; /* nsec per ccount increment */
+unsigned long ccount_freq; /* ccount Hz */
#endif
static cycle_t ccount_read(struct clocksource *cs)
@@ -37,6 +38,11 @@ static cycle_t ccount_read(struct clocksource *cs)
return (cycle_t)get_ccount();
}
+static u32 notrace ccount_sched_clock_read(void)
+{
+ return get_ccount();
+}
+
static struct clocksource ccount_clocksource = {
.name = "ccount",
.rating = 200,
@@ -44,29 +50,98 @@ static struct clocksource ccount_clocksource = {
.mask = CLOCKSOURCE_MASK(32),
};
+static int ccount_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev);
+static void ccount_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt);
+static struct ccount_timer_t {
+ struct clock_event_device evt;
+ int irq_enabled;
+} ccount_timer = {
+ .evt = {
+ .name = "ccount_clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 300,
+ .set_next_event = ccount_timer_set_next_event,
+ .set_mode = ccount_timer_set_mode,
+ },
+};
+
+static int ccount_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ unsigned long flags, next;
+ int ret = 0;
+
+ local_irq_save(flags);
+ next = get_ccount() + delta;
+ set_linux_timer(next);
+ if (next - get_ccount() > delta)
+ ret = -ETIME;
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+static void ccount_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct ccount_timer_t *timer =
+ container_of(evt, struct ccount_timer_t, evt);
+
+ /*
+ * There is no way to disable the timer interrupt at the device level,
+ * only at the intenable register itself. Since enable_irq/disable_irq
+ * calls are nested, we need to make sure that these calls are
+ * balanced.
+ */
+ switch (mode) {
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ if (timer->irq_enabled) {
+ disable_irq(evt->irq);
+ timer->irq_enabled = 0;
+ }
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_ONESHOT:
+ if (!timer->irq_enabled) {
+ enable_irq(evt->irq);
+ timer->irq_enabled = 1;
+ }
+ default:
+ break;
+ }
+}
+
static irqreturn_t timer_interrupt(int irq, void *dev_id);
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_TIMER,
.name = "timer",
+ .dev_id = &ccount_timer,
};
void __init time_init(void)
{
- unsigned int irq;
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
printk("Calibrating CPU frequency ");
platform_calibrate_ccount();
- printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
- (int)(ccount_per_jiffy/(10000/HZ))%100);
+ printk("%d.%02d MHz\n", (int)ccount_freq/1000000,
+ (int)(ccount_freq/10000)%100);
#endif
clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ);
- /* Initialize the linux timer interrupt. */
+ ccount_timer.evt.cpumask = cpumask_of(0);
+ ccount_timer.evt.irq = irq_create_mapping(NULL, LINUX_TIMER_INT);
+ if (WARN(!ccount_timer.evt.irq, "error: can't map timer irq"))
+ return;
+ clockevents_config_and_register(&ccount_timer.evt, ccount_freq, 0xf,
+ 0xffffffff);
+ setup_irq(ccount_timer.evt.irq, &timer_irqaction);
+ ccount_timer.irq_enabled = 1;
- irq = irq_create_mapping(NULL, LINUX_TIMER_INT);
- setup_irq(irq, &timer_irqaction);
- set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY);
+ setup_sched_clock(ccount_sched_clock_read, 32, ccount_freq);
}
/*
@@ -75,36 +150,14 @@ void __init time_init(void)
irqreturn_t timer_interrupt (int irq, void *dev_id)
{
+ struct ccount_timer_t *timer = dev_id;
+ struct clock_event_device *evt = &timer->evt;
- unsigned long next;
-
- next = get_linux_timer();
-
-again:
- while ((signed long)(get_ccount() - next) > 0) {
-
- profile_tick(CPU_PROFILING);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
-
- xtime_update(1); /* Linux handler in kernel/time/timekeeping */
-
- /* Note that writing CCOMPARE clears the interrupt. */
-
- next += CCOUNT_PER_JIFFY;
- set_linux_timer(next);
- }
+ evt->event_handler(evt);
/* Allow platform to do something useful (Wdog). */
-
platform_heartbeat();
- /* Make sure we didn't miss any tick... */
-
- if ((signed long)(get_ccount() - next) > 0)
- goto again;
-
return IRQ_HANDLED;
}
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 42c53c87c204..d8507f812f46 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -124,3 +124,7 @@ extern long common_exception_return;
extern long _spill_registers;
EXPORT_SYMBOL(common_exception_return);
EXPORT_SYMBOL(_spill_registers);
+
+#ifdef CONFIG_FUNCTION_TRACER
+EXPORT_SYMBOL(_mcount);
+#endif
diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c
index 5411aa67c68e..ca9d2366bf12 100644
--- a/arch/xtensa/mm/tlb.c
+++ b/arch/xtensa/mm/tlb.c
@@ -64,7 +64,7 @@ void flush_tlb_mm(struct mm_struct *mm)
{
if (mm == current->active_mm) {
unsigned long flags;
- local_save_flags(flags);
+ local_irq_save(flags);
__get_new_mmu_context(mm);
__load_mmu_context(mm);
local_irq_restore(flags);
@@ -94,7 +94,7 @@ void flush_tlb_range (struct vm_area_struct *vma,
printk("[tlbrange<%02lx,%08lx,%08lx>]\n",
(unsigned long)mm->context, start, end);
#endif
- local_save_flags(flags);
+ local_irq_save(flags);
if (end-start + (PAGE_SIZE-1) <= _TLB_ENTRIES << PAGE_SHIFT) {
int oldpid = get_rasid_register();
@@ -128,9 +128,10 @@ void flush_tlb_page (struct vm_area_struct *vma, unsigned long page)
if(mm->context == NO_CONTEXT)
return;
- local_save_flags(flags);
+ local_irq_save(flags);
oldpid = get_rasid_register();
+ set_rasid_register(ASID_INSERT(mm->context));
if (vma->vm_flags & VM_EXEC)
invalidate_itlb_mapping(page);
@@ -140,3 +141,116 @@ void flush_tlb_page (struct vm_area_struct *vma, unsigned long page)
local_irq_restore(flags);
}
+
+#ifdef CONFIG_DEBUG_TLB_SANITY
+
+static unsigned get_pte_for_vaddr(unsigned vaddr)
+{
+ struct task_struct *task = get_current();
+ struct mm_struct *mm = task->mm;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ if (!mm)
+ mm = task->active_mm;
+ pgd = pgd_offset(mm, vaddr);
+ if (pgd_none_or_clear_bad(pgd))
+ return 0;
+ pmd = pmd_offset(pgd, vaddr);
+ if (pmd_none_or_clear_bad(pmd))
+ return 0;
+ pte = pte_offset_map(pmd, vaddr);
+ if (!pte)
+ return 0;
+ return pte_val(*pte);
+}
+
+enum {
+ TLB_SUSPICIOUS = 1,
+ TLB_INSANE = 2,
+};
+
+static void tlb_insane(void)
+{
+ BUG_ON(1);
+}
+
+static void tlb_suspicious(void)
+{
+ WARN_ON(1);
+}
+
+/*
+ * Check that TLB entries with kernel ASID (1) have kernel VMA (>= TASK_SIZE),
+ * and TLB entries with user ASID (>=4) have VMA < TASK_SIZE.
+ *
+ * Check that valid TLB entries either have the same PA as the PTE, or PTE is
+ * marked as non-present. Non-present PTE and the page with non-zero refcount
+ * and zero mapcount is normal for batched TLB flush operation. Zero refcount
+ * means that the page was freed prematurely. Non-zero mapcount is unusual,
+ * but does not necessary means an error, thus marked as suspicious.
+ */
+static int check_tlb_entry(unsigned w, unsigned e, bool dtlb)
+{
+ unsigned tlbidx = w | (e << PAGE_SHIFT);
+ unsigned r0 = dtlb ?
+ read_dtlb_virtual(tlbidx) : read_itlb_virtual(tlbidx);
+ unsigned vpn = (r0 & PAGE_MASK) | (e << PAGE_SHIFT);
+ unsigned pte = get_pte_for_vaddr(vpn);
+ unsigned mm_asid = (get_rasid_register() >> 8) & ASID_MASK;
+ unsigned tlb_asid = r0 & ASID_MASK;
+ bool kernel = tlb_asid == 1;
+ int rc = 0;
+
+ if (tlb_asid > 0 && ((vpn < TASK_SIZE) == kernel)) {
+ pr_err("%cTLB: way: %u, entry: %u, VPN %08x in %s PTE\n",
+ dtlb ? 'D' : 'I', w, e, vpn,
+ kernel ? "kernel" : "user");
+ rc |= TLB_INSANE;
+ }
+
+ if (tlb_asid == mm_asid) {
+ unsigned r1 = dtlb ? read_dtlb_translation(tlbidx) :
+ read_itlb_translation(tlbidx);
+ if ((pte ^ r1) & PAGE_MASK) {
+ pr_err("%cTLB: way: %u, entry: %u, mapping: %08x->%08x, PTE: %08x\n",
+ dtlb ? 'D' : 'I', w, e, r0, r1, pte);
+ if (pte == 0 || !pte_present(__pte(pte))) {
+ struct page *p = pfn_to_page(r1 >> PAGE_SHIFT);
+ pr_err("page refcount: %d, mapcount: %d\n",
+ page_count(p),
+ page_mapcount(p));
+ if (!page_count(p))
+ rc |= TLB_INSANE;
+ else if (page_mapped(p))
+ rc |= TLB_SUSPICIOUS;
+ } else {
+ rc |= TLB_INSANE;
+ }
+ }
+ }
+ return rc;
+}
+
+void check_tlb_sanity(void)
+{
+ unsigned long flags;
+ unsigned w, e;
+ int bug = 0;
+
+ local_irq_save(flags);
+ for (w = 0; w < DTLB_ARF_WAYS; ++w)
+ for (e = 0; e < (1 << XCHAL_DTLB_ARF_ENTRIES_LOG2); ++e)
+ bug |= check_tlb_entry(w, e, true);
+ for (w = 0; w < ITLB_ARF_WAYS; ++w)
+ for (e = 0; e < (1 << XCHAL_ITLB_ARF_ENTRIES_LOG2); ++e)
+ bug |= check_tlb_entry(w, e, false);
+ if (bug & TLB_INSANE)
+ tlb_insane();
+ if (bug & TLB_SUSPICIOUS)
+ tlb_suspicious();
+ local_irq_restore(flags);
+}
+
+#endif /* CONFIG_DEBUG_TLB_SANITY */
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index 7d0fea6d7f20..56f88b7afe2f 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -700,7 +700,7 @@ struct iss_net_init {
#define ERR KERN_ERR "iss_net_setup: "
-static int iss_net_setup(char *str)
+static int __init iss_net_setup(char *str)
{
struct iss_net_private *device = NULL;
struct iss_net_init *new;
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
index c0edb35424ce..8c6e819cd8ed 100644
--- a/arch/xtensa/platforms/iss/simdisk.c
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -108,13 +108,13 @@ static int simdisk_xfer_bio(struct simdisk *dev, struct bio *bio)
sector_t sector = bio->bi_sector;
bio_for_each_segment(bvec, bio, i) {
- char *buffer = __bio_kmap_atomic(bio, i, KM_USER0);
+ char *buffer = __bio_kmap_atomic(bio, i);
unsigned len = bvec->bv_len >> SECTOR_SHIFT;
simdisk_transfer(dev, sector, len, buffer,
bio_data_dir(bio) == WRITE);
sector += len;
- __bio_kunmap_atomic(bio, KM_USER0);
+ __bio_kunmap_atomic(bio);
}
return 0;
}
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 96ef8eeb064e..74bb74fa3f87 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -163,7 +163,7 @@ void platform_heartbeat(void)
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
-void platform_calibrate_ccount(void)
+void __init platform_calibrate_ccount(void)
{
long clk_freq = 0;
#ifdef CONFIG_OF
@@ -179,8 +179,7 @@ void platform_calibrate_ccount(void)
if (!clk_freq)
clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
- ccount_per_jiffy = clk_freq / HZ;
- nsec_per_ccount = 1000000000UL / clk_freq;
+ ccount_freq = clk_freq;
}
#endif
diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c
index 54b2b573f166..39154563ee17 100644
--- a/arch/xtensa/variants/s6000/delay.c
+++ b/arch/xtensa/variants/s6000/delay.c
@@ -1,4 +1,3 @@
-#include <asm/delay.h>
#include <asm/timex.h>
#include <asm/io.h>
#include <variant/hardware.h>
@@ -17,11 +16,10 @@ void platform_calibrate_ccount(void)
"1: l32i %0, %2, 0 ;"
" beq %0, %1, 1b ;"
: "=&a"(u) : "a"(t), "a"(tstamp));
- b = xtensa_get_ccount();
+ b = get_ccount();
if (i == LOOPS)
a = b;
} while (--i >= 0);
b -= a;
- nsec_per_ccount = (LOOPS * 10000) / b;
- ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+ ccount_freq = b * (100000UL / LOOPS);
}
diff --git a/include/linux/bio.h b/include/linux/bio.h
index ef24466d8f82..ec48bac5b039 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -97,11 +97,11 @@ static inline void *bio_data(struct bio *bio)
* permanent PIO fall back, user is probably better off disabling highmem
* I/O completely on that queue (see ide-dma for example)
*/
-#define __bio_kmap_atomic(bio, idx, kmtype) \
+#define __bio_kmap_atomic(bio, idx) \
(kmap_atomic(bio_iovec_idx((bio), (idx))->bv_page) + \
bio_iovec_idx((bio), (idx))->bv_offset)
-#define __bio_kunmap_atomic(addr, kmtype) kunmap_atomic(addr)
+#define __bio_kunmap_atomic(addr) kunmap_atomic(addr)
/*
* merge helpers etc