summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/usb/authorization.txt92
-rw-r--r--Documentation/usb/power-management.txt517
-rw-r--r--Documentation/usb/usb-serial.txt11
-rw-r--r--Documentation/usb/usbmon.txt9
-rw-r--r--MAINTAINERS7
-rw-r--r--arch/blackfin/mach-bf537/boards/generic_board.c2
-rw-r--r--arch/blackfin/mach-bf537/boards/pnav10.c2
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c2
-rw-r--r--drivers/usb/Makefile22
-rw-r--r--drivers/usb/atm/cxacru.c43
-rw-r--r--drivers/usb/atm/speedtch.c3
-rw-r--r--drivers/usb/atm/ueagle-atm.c1384
-rw-r--r--drivers/usb/class/usblp.c116
-rw-r--r--drivers/usb/core/config.c24
-rw-r--r--drivers/usb/core/devio.c77
-rw-r--r--drivers/usb/core/driver.c90
-rw-r--r--drivers/usb/core/endpoint.c1
-rw-r--r--drivers/usb/core/generic.c26
-rw-r--r--drivers/usb/core/hcd.c718
-rw-r--r--drivers/usb/core/hcd.h46
-rw-r--r--drivers/usb/core/hub.c276
-rw-r--r--drivers/usb/core/message.c50
-rw-r--r--drivers/usb/core/quirks.c81
-rw-r--r--drivers/usb/core/sysfs.c50
-rw-r--r--drivers/usb/core/urb.c106
-rw-r--r--drivers/usb/core/usb.c41
-rw-r--r--drivers/usb/core/usb.h5
-rw-r--r--drivers/usb/gadget/Kconfig26
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/amd5536udc.c9
-rw-r--r--drivers/usb/gadget/at91_udc.c2
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c2077
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.h352
-rw-r--r--drivers/usb/gadget/config.c2
-rw-r--r--drivers/usb/gadget/dummy_hcd.c93
-rw-r--r--drivers/usb/gadget/epautoconf.c2
-rw-r--r--drivers/usb/gadget/ether.c155
-rw-r--r--drivers/usb/gadget/file_storage.c249
-rw-r--r--drivers/usb/gadget/fsl_usb2_udc.c13
-rw-r--r--drivers/usb/gadget/gmidi.c82
-rw-r--r--drivers/usb/gadget/goku_udc.c2
-rw-r--r--drivers/usb/gadget/inode.c46
-rw-r--r--drivers/usb/gadget/lh7a40x_udc.h2
-rw-r--r--drivers/usb/gadget/m66592-udc.c2
-rw-r--r--drivers/usb/gadget/net2280.c2
-rw-r--r--drivers/usb/gadget/omap_udc.c12
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c2
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c2
-rw-r--r--drivers/usb/gadget/serial.c174
-rw-r--r--drivers/usb/gadget/usbstring.c2
-rw-r--r--drivers/usb/gadget/zero.c239
-rw-r--r--drivers/usb/host/Kconfig13
-rw-r--r--drivers/usb/host/ehci-au1xxx.c6
-rw-r--r--drivers/usb/host/ehci-hcd.c22
-rw-r--r--drivers/usb/host/ehci-pci.c5
-rw-r--r--drivers/usb/host/ehci-ppc-soc.c6
-rw-r--r--drivers/usb/host/ehci-ps3.c2
-rw-r--r--drivers/usb/host/ehci-q.c99
-rw-r--r--drivers/usb/host/ehci-sched.c47
-rw-r--r--drivers/usb/host/isp116x-hcd.c61
-rw-r--r--drivers/usb/host/ohci-dbg.c8
-rw-r--r--drivers/usb/host/ohci-hcd.c234
-rw-r--r--drivers/usb/host/ohci-mem.c1
-rw-r--r--drivers/usb/host/ohci-pci.c22
-rw-r--r--drivers/usb/host/ohci-ppc-of.c5
-rw-r--r--drivers/usb/host/ohci-ppc-soc.c5
-rw-r--r--drivers/usb/host/ohci-q.c187
-rw-r--r--drivers/usb/host/ohci-ssb.c247
-rw-r--r--drivers/usb/host/ohci.h39
-rw-r--r--drivers/usb/host/r8a66597-hcd.c172
-rw-r--r--drivers/usb/host/sl811-hcd.c74
-rw-r--r--drivers/usb/host/u132-hcd.c370
-rw-r--r--drivers/usb/host/uhci-debug.c4
-rw-r--r--drivers/usb/host/uhci-hcd.h16
-rw-r--r--drivers/usb/host/uhci-q.c70
-rw-r--r--drivers/usb/misc/adutux.c3
-rw-r--r--drivers/usb/misc/berry_charge.c7
-rw-r--r--drivers/usb/misc/ftdi-elan.c8
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c200
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.h130
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb_con.c60
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb_init.c354
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb_init.h1315
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb_struct.h144
-rw-r--r--drivers/usb/mon/mon_bin.c42
-rw-r--r--drivers/usb/mon/mon_main.c25
-rw-r--r--drivers/usb/mon/mon_text.c72
-rw-r--r--drivers/usb/mon/usb_mon.h2
-rw-r--r--drivers/usb/serial/Kconfig10
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/ark3116.c5
-rw-r--r--drivers/usb/serial/bus.c16
-rw-r--r--drivers/usb/serial/ch341.c354
-rw-r--r--drivers/usb/serial/cp2101.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c5
-rw-r--r--drivers/usb/serial/funsoft.c21
-rw-r--r--drivers/usb/serial/ipaq.c3
-rw-r--r--drivers/usb/serial/kl5kusb105.c28
-rw-r--r--drivers/usb/serial/kobil_sct.c144
-rw-r--r--drivers/usb/serial/mct_u232.c28
-rw-r--r--drivers/usb/serial/oti6858.c2
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/safe_serial.c11
-rw-r--r--drivers/usb/serial/usb-serial.c42
-rw-r--r--drivers/usb/serial/visor.c64
-rw-r--r--drivers/usb/storage/initializers.c14
-rw-r--r--drivers/usb/storage/initializers.h3
-rw-r--r--drivers/usb/storage/shuttle_usbat.c3
-rw-r--r--drivers/usb/storage/unusual_devs.h34
-rw-r--r--drivers/usb/storage/usb.c4
-rw-r--r--drivers/usb/usb-skeleton.c1
-rw-r--r--include/linux/usb.h79
-rw-r--r--include/linux/usb/gadget.h (renamed from include/linux/usb_gadget.h)97
-rw-r--r--include/linux/usb/quirks.h7
-rw-r--r--include/linux/usb/serial.h20
-rw-r--r--include/linux/usb_sl811.h26
117 files changed, 8610 insertions, 3843 deletions
diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt
new file mode 100644
index 000000000000..2af400609498
--- /dev/null
+++ b/Documentation/usb/authorization.txt
@@ -0,0 +1,92 @@
+
+Authorizing (or not) your USB devices to connect to the system
+
+(C) 2007 Inaky Perez-Gonzalez <inaky@linux.intel.com> Intel Corporation
+
+This feature allows you to control if a USB device can be used (or
+not) in a system. This feature will allow you to implement a lock-down
+of USB devices, fully controlled by user space.
+
+As of now, when a USB device is connected it is configured and
+it's interfaces inmediately made available to the users. With this
+modification, only if root authorizes the device to be configured will
+then it be possible to use it.
+
+Usage:
+
+Authorize a device to connect:
+
+$ echo 1 > /sys/usb/devices/DEVICE/authorized
+
+Deauthorize a device:
+
+$ echo 0 > /sys/usb/devices/DEVICE/authorized
+
+Set new devices connected to hostX to be deauthorized by default (ie:
+lock down):
+
+$ echo 0 > /sys/bus/devices/usbX/authorized_default
+
+Remove the lock down:
+
+$ echo 1 > /sys/bus/devices/usbX/authorized_default
+
+By default, Wired USB devices are authorized by default to
+connect. Wireless USB hosts deauthorize by default all new connected
+devices (this is so because we need to do an authentication phase
+before authorizing).
+
+
+Example system lockdown (lame)
+-----------------------
+
+Imagine you want to implement a lockdown so only devices of type XYZ
+can be connected (for example, it is a kiosk machine with a visible
+USB port):
+
+boot up
+rc.local ->
+
+ for host in /sys/bus/devices/usb*
+ do
+ echo 0 > $host/authorized_default
+ done
+
+Hookup an script to udev, for new USB devices
+
+ if device_is_my_type $DEV
+ then
+ echo 1 > $device_path/authorized
+ done
+
+
+Now, device_is_my_type() is where the juice for a lockdown is. Just
+checking if the class, type and protocol match something is the worse
+security verification you can make (or the best, for someone willing
+to break it). If you need something secure, use crypto and Certificate
+Authentication or stuff like that. Something simple for an storage key
+could be:
+
+function device_is_my_type()
+{
+ echo 1 > authorized # temporarily authorize it
+ # FIXME: make sure none can mount it
+ mount DEVICENODE /mntpoint
+ sum=$(md5sum /mntpoint/.signature)
+ if [ $sum = $(cat /etc/lockdown/keysum) ]
+ then
+ echo "We are good, connected"
+ umount /mntpoint
+ # Other stuff so others can use it
+ else
+ echo 0 > authorized
+ fi
+}
+
+
+Of course, this is lame, you'd want to do a real certificate
+verification stuff with PKI, so you don't depend on a shared secret,
+etc, but you get the idea. Anybody with access to a device gadget kit
+can fake descriptors and device info. Don't trust that. You are
+welcome.
+
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
new file mode 100644
index 000000000000..97842deec471
--- /dev/null
+++ b/Documentation/usb/power-management.txt
@@ -0,0 +1,517 @@
+ Power Management for USB
+
+ Alan Stern <stern@rowland.harvard.edu>
+
+ October 5, 2007
+
+
+
+ What is Power Management?
+ -------------------------
+
+Power Management (PM) is the practice of saving energy by suspending
+parts of a computer system when they aren't being used. While a
+component is "suspended" it is in a nonfunctional low-power state; it
+might even be turned off completely. A suspended component can be
+"resumed" (returned to a functional full-power state) when the kernel
+needs to use it. (There also are forms of PM in which components are
+placed in a less functional but still usable state instead of being
+suspended; an example would be reducing the CPU's clock rate. This
+document will not discuss those other forms.)
+
+When the parts being suspended include the CPU and most of the rest of
+the system, we speak of it as a "system suspend". When a particular
+device is turned off while the system as a whole remains running, we
+call it a "dynamic suspend" (also known as a "runtime suspend" or
+"selective suspend"). This document concentrates mostly on how
+dynamic PM is implemented in the USB subsystem, although system PM is
+covered to some extent (see Documentation/power/*.txt for more
+information about system PM).
+
+Note: Dynamic PM support for USB is present only if the kernel was
+built with CONFIG_USB_SUSPEND enabled. System PM support is present
+only if the kernel was built with CONFIG_SUSPEND or CONFIG_HIBERNATION
+enabled.
+
+
+ What is Remote Wakeup?
+ ----------------------
+
+When a device has been suspended, it generally doesn't resume until
+the computer tells it to. Likewise, if the entire computer has been
+suspended, it generally doesn't resume until the user tells it to, say
+by pressing a power button or opening the cover.
+
+However some devices have the capability of resuming by themselves, or
+asking the kernel to resume them, or even telling the entire computer
+to resume. This capability goes by several names such as "Wake On
+LAN"; we will refer to it generically as "remote wakeup". When a
+device is enabled for remote wakeup and it is suspended, it may resume
+itself (or send a request to be resumed) in response to some external
+event. Examples include a suspended keyboard resuming when a key is
+pressed, or a suspended USB hub resuming when a device is plugged in.
+
+
+ When is a USB device idle?
+ --------------------------
+
+A device is idle whenever the kernel thinks it's not busy doing
+anything important and thus is a candidate for being suspended. The
+exact definition depends on the device's driver; drivers are allowed
+to declare that a device isn't idle even when there's no actual
+communication taking place. (For example, a hub isn't considered idle
+unless all the devices plugged into that hub are already suspended.)
+In addition, a device isn't considered idle so long as a program keeps
+its usbfs file open, whether or not any I/O is going on.
+
+If a USB device has no driver, its usbfs file isn't open, and it isn't
+being accessed through sysfs, then it definitely is idle.
+
+
+ Forms of dynamic PM
+ -------------------
+
+Dynamic suspends can occur in two ways: manual and automatic.
+"Manual" means that the user has told the kernel to suspend a device,
+whereas "automatic" means that the kernel has decided all by itself to
+suspend a device. Automatic suspend is called "autosuspend" for
+short. In general, a device won't be autosuspended unless it has been
+idle for some minimum period of time, the so-called idle-delay time.
+
+Of course, nothing the kernel does on its own initiative should
+prevent the computer or its devices from working properly. If a
+device has been autosuspended and a program tries to use it, the
+kernel will automatically resume the device (autoresume). For the
+same reason, an autosuspended device will usually have remote wakeup
+enabled, if the device supports remote wakeup.
+
+It is worth mentioning that many USB drivers don't support
+autosuspend. In fact, at the time of this writing (Linux 2.6.23) the
+only drivers which do support it are the hub driver, kaweth, asix,
+usblp, usblcd, and usb-skeleton (which doesn't count). If a
+non-supporting driver is bound to a device, the device won't be
+autosuspended. In effect, the kernel pretends the device is never
+idle.
+
+We can categorize power management events in two broad classes:
+external and internal. External events are those triggered by some
+agent outside the USB stack: system suspend/resume (triggered by
+userspace), manual dynamic suspend/resume (also triggered by
+userspace), and remote wakeup (triggered by the device). Internal
+events are those triggered within the USB stack: autosuspend and
+autoresume.
+
+
+ The user interface for dynamic PM
+ ---------------------------------
+
+The user interface for controlling dynamic PM is located in the power/
+subdirectory of each USB device's sysfs directory, that is, in
+/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The
+relevant attribute files are: wakeup, level, and autosuspend.
+
+ power/wakeup
+
+ This file is empty if the device does not support
+ remote wakeup. Otherwise the file contains either the
+ word "enabled" or the word "disabled", and you can
+ write those words to the file. The setting determines
+ whether or not remote wakeup will be enabled when the
+ device is next suspended. (If the setting is changed
+ while the device is suspended, the change won't take
+ effect until the following suspend.)
+
+ power/level
+
+ This file contains one of three words: "on", "auto",
+ or "suspend". You can write those words to the file
+ to change the device's setting.
+
+ "on" means that the device should be resumed and
+ autosuspend is not allowed. (Of course, system
+ suspends are still allowed.)
+
+ "auto" is the normal state in which the kernel is
+ allowed to autosuspend and autoresume the device.
+
+ "suspend" means that the device should remain
+ suspended, and autoresume is not allowed. (But remote
+ wakeup may still be allowed, since it is controlled
+ separately by the power/wakeup attribute.)
+
+ power/autosuspend
+
+ This file contains an integer value, which is the
+ number of seconds the device should remain idle before
+ the kernel will autosuspend it (the idle-delay time).
+ The default is 2. 0 means to autosuspend as soon as
+ the device becomes idle, and -1 means never to
+ autosuspend. You can write a number to the file to
+ change the autosuspend idle-delay time.
+
+Writing "-1" to power/autosuspend and writing "on" to power/level do
+essentially the same thing -- they both prevent the device from being
+autosuspended. Yes, this is a redundancy in the API.
+
+(In 2.6.21 writing "0" to power/autosuspend would prevent the device
+from being autosuspended; the behavior was changed in 2.6.22. The
+power/autosuspend attribute did not exist prior to 2.6.21, and the
+power/level attribute did not exist prior to 2.6.22.)
+
+
+ Changing the default idle-delay time
+ ------------------------------------
+
+The default autosuspend idle-delay time is controlled by a module
+parameter in usbcore. You can specify the value when usbcore is
+loaded. For example, to set it to 5 seconds instead of 2 you would
+do:
+
+ modprobe usbcore autosuspend=5
+
+Equivalently, you could add to /etc/modprobe.conf a line saying:
+
+ options usbcore autosuspend=5
+
+Some distributions load the usbcore module very early during the boot
+process, by means of a program or script running from an initramfs
+image. To alter the parameter value you would have to rebuild that
+image.
+
+If usbcore is compiled into the kernel rather than built as a loadable
+module, you can add
+
+ usbcore.autosuspend=5
+
+to the kernel's boot command line.
+
+Finally, the parameter value can be changed while the system is
+running. If you do:
+
+ echo 5 >/sys/module/usbcore/parameters/autosuspend
+
+then each new USB device will have its autosuspend idle-delay
+initialized to 5. (The idle-delay values for already existing devices
+will not be affected.)
+
+Setting the initial default idle-delay to -1 will prevent any
+autosuspend of any USB device. This is a simple alternative to
+disabling CONFIG_USB_SUSPEND and rebuilding the kernel, and it has the
+added benefit of allowing you to enable autosuspend for selected
+devices.
+
+
+ Warnings
+ --------
+
+The USB specification states that all USB devices must support power
+management. Nevertheless, the sad fact is that many devices do not
+support it very well. You can suspend them all right, but when you
+try to resume them they disconnect themselves from the USB bus or
+they stop working entirely. This seems to be especially prevalent
+among printers and scanners, but plenty of other types of device have
+the same deficiency.
+
+For this reason, by default the kernel disables autosuspend (the
+power/level attribute is initialized to "on") for all devices other
+than hubs. Hubs, at least, appear to be reasonably well-behaved in
+this regard.
+
+(In 2.6.21 and 2.6.22 this wasn't the case. Autosuspend was enabled
+by default for almost all USB devices. A number of people experienced
+problems as a result.)
+
+This means that non-hub devices won't be autosuspended unless the user
+or a program explicitly enables it. As of this writing there aren't
+any widespread programs which will do this; we hope that in the near
+future device managers such as HAL will take on this added
+responsibility. In the meantime you can always carry out the
+necessary operations by hand or add them to a udev script. You can
+also change the idle-delay time; 2 seconds is not the best choice for
+every device.
+
+Sometimes it turns out that even when a device does work okay with
+autosuspend there are still problems. For example, there are
+experimental patches adding autosuspend support to the usbhid driver,
+which manages keyboards and mice, among other things. Tests with a
+number of keyboards showed that typing on a suspended keyboard, while
+causing the keyboard to do a remote wakeup all right, would
+nonetheless frequently result in lost keystrokes. Tests with mice
+showed that some of them would issue a remote-wakeup request in
+response to button presses but not to motion, and some in response to
+neither.
+
+The kernel will not prevent you from enabling autosuspend on devices
+that can't handle it. It is even possible in theory to damage a
+device by suspending it at the wrong time -- for example, suspending a
+USB hard disk might cause it to spin down without parking the heads.
+(Highly unlikely, but possible.) Take care.
+
+
+ The driver interface for Power Management
+ -----------------------------------------
+
+The requirements for a USB driver to support external power management
+are pretty modest; the driver need only define
+
+ .suspend
+ .resume
+ .reset_resume
+
+methods in its usb_driver structure, and the reset_resume method is
+optional. The methods' jobs are quite simple:
+
+ The suspend method is called to warn the driver that the
+ device is going to be suspended. If the driver returns a
+ negative error code, the suspend will be aborted. Normally
+ the driver will return 0, in which case it must cancel all
+ outstanding URBs (usb_kill_urb()) and not submit any more.
+
+ The resume method is called to tell the driver that the
+ device has been resumed and the driver can return to normal
+ operation. URBs may once more be submitted.
+
+ The reset_resume method is called to tell the driver that
+ the device has been resumed and it also has been reset.
+ The driver should redo any necessary device initialization,
+ since the device has probably lost most or all of its state
+ (although the interfaces will be in the same altsettings as
+ before the suspend).
+
+The reset_resume method is used by the USB Persist facility (see
+Documentation/usb/persist.txt) and it can also be used under certain
+circumstances when CONFIG_USB_PERSIST is not enabled. Currently, if a
+device is reset during a resume and the driver does not have a
+reset_resume method, the driver won't receive any notification about
+the resume. Later kernels will call the driver's disconnect method;
+2.6.23 doesn't do this.
+
+USB drivers are bound to interfaces, so their suspend and resume
+methods get called when the interfaces are suspended or resumed. In
+principle one might want to suspend some interfaces on a device (i.e.,
+force the drivers for those interface to stop all activity) without
+suspending the other interfaces. The USB core doesn't allow this; all
+interfaces are suspended when the device itself is suspended and all
+interfaces are resumed when the device is resumed. It isn't possible
+to suspend or resume some but not all of a device's interfaces. The
+closest you can come is to unbind the interfaces' drivers.
+
+
+ The driver interface for autosuspend and autoresume
+ ---------------------------------------------------
+
+To support autosuspend and autoresume, a driver should implement all
+three of the methods listed above. In addition, a driver indicates
+that it supports autosuspend by setting the .supports_autosuspend flag
+in its usb_driver structure. It is then responsible for informing the
+USB core whenever one of its interfaces becomes busy or idle. The
+driver does so by calling these three functions:
+
+ int usb_autopm_get_interface(struct usb_interface *intf);
+ void usb_autopm_put_interface(struct usb_interface *intf);
+ int usb_autopm_set_interface(struct usb_interface *intf);
+
+The functions work by maintaining a counter in the usb_interface
+structure. When intf->pm_usage_count is > 0 then the interface is
+deemed to be busy, and the kernel will not autosuspend the interface's
+device. When intf->pm_usage_count is <= 0 then the interface is
+considered to be idle, and the kernel may autosuspend the device.
+
+(There is a similar pm_usage_count field in struct usb_device,
+associated with the device itself rather than any of its interfaces.
+This field is used only by the USB core.)
+
+The driver owns intf->pm_usage_count; it can modify the value however
+and whenever it likes. A nice aspect of the usb_autopm_* routines is
+that the changes they make are protected by the usb_device structure's
+PM mutex (udev->pm_mutex); however drivers may change pm_usage_count
+without holding the mutex.
+
+ usb_autopm_get_interface() increments pm_usage_count and
+ attempts an autoresume if the new value is > 0 and the
+ device is suspended.
+
+ usb_autopm_put_interface() decrements pm_usage_count and
+ attempts an autosuspend if the new value is <= 0 and the
+ device isn't suspended.
+
+ usb_autopm_set_interface() leaves pm_usage_count alone.
+ It attempts an autoresume if the value is > 0 and the device
+ is suspended, and it attempts an autosuspend if the value is
+ <= 0 and the device isn't suspended.
+
+There also are a couple of utility routines drivers can use:
+
+ usb_autopm_enable() sets pm_usage_cnt to 1 and then calls
+ usb_autopm_set_interface(), which will attempt an autoresume.
+
+ usb_autopm_disable() sets pm_usage_cnt to 0 and then calls
+ usb_autopm_set_interface(), which will attempt an autosuspend.
+
+The conventional usage pattern is that a driver calls
+usb_autopm_get_interface() in its open routine and
+usb_autopm_put_interface() in its close or release routine. But
+other patterns are possible.
+
+The autosuspend attempts mentioned above will often fail for one
+reason or another. For example, the power/level attribute might be
+set to "on", or another interface in the same device might not be
+idle. This is perfectly normal. If the reason for failure was that
+the device hasn't been idle for long enough, a delayed workqueue
+routine is automatically set up to carry out the operation when the
+autosuspend idle-delay has expired.
+
+Autoresume attempts also can fail. This will happen if power/level is
+set to "suspend" or if the device doesn't manage to resume properly.
+Unlike autosuspend, there's no delay for an autoresume.
+
+
+ Other parts of the driver interface
+ -----------------------------------
+
+Sometimes a driver needs to make sure that remote wakeup is enabled
+during autosuspend. For example, there's not much point
+autosuspending a keyboard if the user can't cause the keyboard to do a
+remote wakeup by typing on it. If the driver sets
+intf->needs_remote_wakeup to 1, the kernel won't autosuspend the
+device if remote wakeup isn't available or has been disabled through
+the power/wakeup attribute. (If the device is already autosuspended,
+though, setting this flag won't cause the kernel to autoresume it.
+Normally a driver would set this flag in its probe method, at which
+time the device is guaranteed not to be autosuspended.)
+
+The usb_autopm_* routines have to run in a sleepable process context;
+they must not be called from an interrupt handler or while holding a
+spinlock. In fact, the entire autosuspend mechanism is not well geared
+toward interrupt-driven operation. However there is one thing a
+driver can do in an interrupt handler:
+
+ usb_mark_last_busy(struct usb_device *udev);
+
+This sets udev->last_busy to the current time. udev->last_busy is the
+field used for idle-delay calculations; updating it will cause any
+pending autosuspend to be moved back. The usb_autopm_* routines will
+also set the last_busy field to the current time.
+
+Calling urb_mark_last_busy() from within an URB completion handler is
+subject to races: The kernel may have just finished deciding the
+device has been idle for long enough but not yet gotten around to
+calling the driver's suspend method. The driver would have to be
+responsible for synchronizing its suspend method with its URB
+completion handler and causing the autosuspend to fail with -EBUSY if
+an URB had completed too recently.
+
+External suspend calls should never be allowed to fail in this way,
+only autosuspend calls. The driver can tell them apart by checking
+udev->auto_pm; this flag will be set to 1 for internal PM events
+(autosuspend or autoresume) and 0 for external PM events.
+
+Many of the ingredients in the autosuspend framework are oriented
+towards interfaces: The usb_interface structure contains the
+pm_usage_cnt field, and the usb_autopm_* routines take an interface
+pointer as their argument. But somewhat confusingly, a few of the
+pieces (usb_mark_last_busy() and udev->auto_pm) use the usb_device
+structure instead. Drivers need to keep this straight; they can call
+interface_to_usbdev() to find the device structure for a given
+interface.
+
+
+ Locking requirements
+ --------------------
+
+All three suspend/resume methods are always called while holding the
+usb_device's PM mutex. For external events -- but not necessarily for
+autosuspend or autoresume -- the device semaphore (udev->dev.sem) will
+also be held. This implies that external suspend/resume events are
+mutually exclusive with calls to probe, disconnect, pre_reset, and
+post_reset; the USB core guarantees that this is true of internal
+suspend/resume events as well.
+
+If a driver wants to block all suspend/resume calls during some
+critical section, it can simply acquire udev->pm_mutex.
+Alternatively, if the critical section might call some of the
+usb_autopm_* routines, the driver can avoid deadlock by doing:
+
+ down(&udev->dev.sem);
+ rc = usb_autopm_get_interface(intf);
+
+and at the end of the critical section:
+
+ if (!rc)
+ usb_autopm_put_interface(intf);
+ up(&udev->dev.sem);
+
+Holding the device semaphore will block all external PM calls, and the
+usb_autopm_get_interface() will prevent any internal PM calls, even if
+it fails. (Exercise: Why?)
+
+The rules for locking order are:
+
+ Never acquire any device semaphore while holding any PM mutex.
+
+ Never acquire udev->pm_mutex while holding the PM mutex for
+ a device that isn't a descendant of udev.
+
+In other words, PM mutexes should only be acquired going up the device
+tree, and they should be acquired only after locking all the device
+semaphores you need to hold. These rules don't matter to drivers very
+much; they usually affect just the USB core.
+
+Still, drivers do need to be careful. For example, many drivers use a
+private mutex to synchronize their normal I/O activities with their
+disconnect method. Now if the driver supports autosuspend then it
+must call usb_autopm_put_interface() from somewhere -- maybe from its
+close method. It should make the call while holding the private mutex,
+since a driver shouldn't call any of the usb_autopm_* functions for an
+interface from which it has been unbound.
+
+But the usb_autpm_* routines always acquire the device's PM mutex, and
+consequently the locking order has to be: private mutex first, PM
+mutex second. Since the suspend method is always called with the PM
+mutex held, it mustn't try to acquire the private mutex. It has to
+synchronize with the driver's I/O activities in some other way.
+
+
+ Interaction between dynamic PM and system PM
+ --------------------------------------------
+
+Dynamic power management and system power management can interact in
+a couple of ways.
+
+Firstly, a device may already be manually suspended or autosuspended
+when a system suspend occurs. Since system suspends are supposed to
+be as transparent as possible, the device should remain suspended
+following the system resume. The 2.6.23 kernel obeys this principle
+for manually suspended devices but not for autosuspended devices; they
+do get resumed when the system wakes up. (Presumably they will be
+autosuspended again after their idle-delay time expires.) In later
+kernels this behavior will be fixed.
+
+(There is an exception. If a device would undergo a reset-resume
+instead of a normal resume, and the device is enabled for remote
+wakeup, then the reset-resume takes place even if the device was
+already suspended when the system suspend began. The justification is
+that a reset-resume is a kind of remote-wakeup event. Or to put it
+another way, a device which needs a reset won't be able to generate
+normal remote-wakeup signals, so it ought to be resumed immediately.)
+
+Secondly, a dynamic power-management event may occur as a system
+suspend is underway. The window for this is short, since system
+suspends don't take long (a few seconds usually), but it can happen.
+For example, a suspended device may send a remote-wakeup signal while
+the system is suspending. The remote wakeup may succeed, which would
+cause the system suspend to abort. If the remote wakeup doesn't
+succeed, it may still remain active and thus cause the system to
+resume as soon as the system suspend is complete. Or the remote
+wakeup may fail and get lost. Which outcome occurs depends on timing
+and on the hardware and firmware design.
+
+More interestingly, a device might undergo a manual resume or
+autoresume during system suspend. With current kernels this shouldn't
+happen, because manual resumes must be initiated by userspace and
+autoresumes happen in response to I/O requests, but all user processes
+and I/O should be quiescent during a system suspend -- thanks to the
+freezer. However there are plans to do away with the freezer, which
+would mean these things would become possible. If and when this comes
+about, the USB core will carefully arrange matters so that either type
+of resume will block until the entire system has resumed.
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index 5b635ae84944..4e0b62b8566f 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -428,6 +428,17 @@ Options supported:
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
+Winchiphead CH341 Driver
+
+ This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip
+ also implements an IEEE 1284 parallel port, I2C and SPI, but that is not
+ supported by the driver. The protocol was analyzed from the behaviour
+ of the Windows driver, no datasheet is available at present.
+ The manufacturer's website: http://www.winchiphead.com/.
+ For any questions or problems with this driver, please contact
+ frank@kingswood-consulting.co.uk.
+
+
Generic Serial driver
If your device is not one of the above listed devices, compatible with
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 53ae866ae37b..2917ce4ffdc4 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,9 +34,12 @@ if usbmon is built into the kernel.
Verify that bus sockets are present.
# ls /sys/kernel/debug/usbmon
-1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
+0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
+Now you can choose to either use the sockets numbered '0' (to capture packets on
+all buses), and skip to step #3, or find the bus used by your device with step #2.
+
2. Find which bus connects to the desired device
Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to
@@ -56,6 +59,10 @@ Bus=03 means it's bus 3.
# cat /sys/kernel/debug/usbmon/3u > /tmp/1.mon.out
+to listen on a single bus, otherwise, to listen on all buses, type:
+
+# cat /sys/kernel/debug/usbmon/0u > /tmp/1.mon.out
+
This process will be reading until killed. Naturally, the output can be
redirected to a desirable location. This is preferred, because it is going
to be quite long.
diff --git a/MAINTAINERS b/MAINTAINERS
index c4eca56ed5bf..60e649ff6fdc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -677,6 +677,13 @@ P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Supported
+ATMEL USBA UDC DRIVER
+P: Haavard Skinnemoen
+M: hskinnemoen@atmel.com
+L: kernel@avr32linux.org
+W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
+S: Supported
+
ATMEL WIRELESS DRIVER
P: Simon Kelley
M: simon@thekelleys.org.uk
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 5e9d09eb8579..6668c8e4a3fc 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -40,7 +40,7 @@
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 20507e92a3a4..f83a2544004d 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -40,7 +40,7 @@
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
#include <linux/spi/ad7877.h>
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 47d7d4a0e73d..f42ba3aa86d7 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -40,7 +40,7 @@
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index ac49b15fa768..516a6400db43 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -28,27 +28,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
-obj-$(CONFIG_USB_ADUTUX) += misc/
-obj-$(CONFIG_USB_APPLEDISPLAY) += misc/
-obj-$(CONFIG_USB_AUERSWALD) += misc/
-obj-$(CONFIG_USB_BERRY_CHARGE) += misc/
-obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
-obj-$(CONFIG_USB_CYTHERM) += misc/
-obj-$(CONFIG_USB_EMI26) += misc/
-obj-$(CONFIG_USB_EMI62) += misc/
-obj-$(CONFIG_USB_FTDI_ELAN) += misc/
-obj-$(CONFIG_USB_IDMOUSE) += misc/
-obj-$(CONFIG_USB_LCD) += misc/
-obj-$(CONFIG_USB_LD) += misc/
-obj-$(CONFIG_USB_LED) += misc/
-obj-$(CONFIG_USB_LEGOTOWER) += misc/
-obj-$(CONFIG_USB_PHIDGETSERVO) += misc/
-obj-$(CONFIG_USB_RIO500) += misc/
-obj-$(CONFIG_USB_SISUSBVGA) += misc/
-obj-$(CONFIG_USB_TEST) += misc/
-obj-$(CONFIG_USB_TRANCEVIBRATOR)+= misc/
-obj-$(CONFIG_USB_USS720) += misc/
-obj-$(CONFIG_USB_IOWARRIOR) += misc/
+obj-$(CONFIG_USB) += misc/
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index a73e714288e5..a51eeedc18d4 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -482,7 +482,9 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE;
if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) {
- dbg("too big transfer requested");
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
+ wbuflen, rbuflen);
ret = -ENOMEM;
goto fail;
}
@@ -493,8 +495,9 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
init_completion(&instance->rcv_done);
ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL);
if (ret < 0) {
- dbg("submitting read urb for cm %#x failed", cm);
- ret = ret;
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "submit of read urb for cm %#x failed (%d)\n",
+ cm, ret);
goto fail;
}
@@ -510,27 +513,29 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
init_completion(&instance->snd_done);
ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL);
if (ret < 0) {
- dbg("submitting write urb for cm %#x failed", cm);
- ret = ret;
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "submit of write urb for cm %#x failed (%d)\n",
+ cm, ret);
goto fail;
}
ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL);
if (ret < 0) {
- dbg("sending cm %#x failed", cm);
- ret = ret;
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, ret);
goto fail;
}
ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen);
if (ret < 0) {
- dbg("receiving cm %#x failed", cm);
- ret = ret;
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", cm, ret);
goto fail;
}
if (actlen % CMD_PACKET_SIZE || !actlen) {
- dbg("response is not a positive multiple of %d: %#x",
- CMD_PACKET_SIZE, actlen);
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "invalid response length to cm %#x: %d\n",
+ cm, actlen);
ret = -EIO;
goto fail;
}
@@ -538,12 +543,16 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
/* check the return status and copy the data to the output buffer, if needed */
for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) {
if (rbuf[offb] != cm) {
- dbg("wrong cm %#x in response", rbuf[offb]);
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "wrong cm %#x in response to cm %#x\n",
+ rbuf[offb], cm);
ret = -EIO;
goto fail;
}
if (rbuf[offb + 1] != CM_STATUS_SUCCESS) {
- dbg("response failed: %#x", rbuf[offb + 1]);
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "response to cm %#x failed: %#x\n",
+ cm, rbuf[offb + 1]);
ret = -EIO;
goto fail;
}
@@ -582,14 +591,18 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
for (offb = 0; offb < len; ) {
int l = le32_to_cpu(buf[offb++]);
if (l > stride || l > (len - offb) / 2) {
- dbg("wrong data length %#x in response", l);
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n",
+ cm, l);
ret = -EIO;
goto cleanup;
}
while (l--) {
offd = le32_to_cpu(buf[offb++]);
if (offd >= size) {
- dbg("wrong index %#x in response", offd);
+ if (printk_ratelimit())
+ usb_err(instance->usbatm, "wrong index #%x in response to cm #%x\n",
+ offd, cm);
ret = -EIO;
goto cleanup;
}
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index eb0615abff68..8b132c4a503b 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -251,7 +251,6 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
{
unsigned char *buffer;
struct usbatm_data *usbatm = instance->usbatm;
- struct usb_interface *intf;
struct usb_device *usb_dev = usbatm->usb_dev;
int actual_length;
int ret = 0;
@@ -265,7 +264,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
goto out;
}
- if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
+ if (!usb_ifnum_to_if(usb_dev, 2)) {
ret = -ENODEV;
usb_dbg(usbatm, "%s: interface not found!\n", __func__);
goto out_free;
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 29807d048b04..389c5b164eb2 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2,7 +2,8 @@
* Copyright (c) 2003, 2004
* Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
*
- * Copyright (c) 2005 Matthieu Castet <castet.matthieu@free.fr>
+ * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr>
+ * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl>
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -107,18 +108,51 @@
#define uea_info(usb_dev, format,args...) \
dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args)
-struct uea_cmvs {
+struct intr_pkt;
+
+/* cmv's from firmware */
+struct uea_cmvs_v1 {
u32 address;
u16 offset;
u32 data;
} __attribute__ ((packed));
+struct uea_cmvs_v2 {
+ u32 group;
+ u32 address;
+ u32 offset;
+ u32 data;
+} __attribute__ ((packed));
+
+/* information about currently processed cmv */
+struct cmv_dsc_e1 {
+ u8 function;
+ u16 idx;
+ u32 address;
+ u16 offset;
+};
+
+struct cmv_dsc_e4 {
+ u16 function;
+ u16 offset;
+ u16 address;
+ u16 group;
+};
+
+union cmv_dsc {
+ struct cmv_dsc_e1 e1;
+ struct cmv_dsc_e4 e4;
+};
+
struct uea_softc {
struct usb_device *usb_dev;
struct usbatm_data *usbatm;
int modem_index;
unsigned int driver_info;
+ int annex;
+#define ANNEXA 0
+#define ANNEXB 1
int booting;
int reset;
@@ -127,20 +161,23 @@ struct uea_softc {
struct task_struct *kthread;
u32 data;
- wait_queue_head_t cmv_ack_wait;
+ u32 data1;
+
int cmv_ack;
+ union cmv_dsc cmv_dsc;
struct work_struct task;
+ struct workqueue_struct *work_q;
u16 pageno;
u16 ovl;
const struct firmware *dsp_firm;
struct urb *urb_int;
- u8 cmv_function;
- u16 cmv_idx;
- u32 cmv_address;
- u16 cmv_offset;
+ void (*dispatch_cmv) (struct uea_softc *, struct intr_pkt *);
+ void (*schedule_load_page) (struct uea_softc *, struct intr_pkt *);
+ int (*stat) (struct uea_softc *);
+ int (*send_cmvs) (struct uea_softc *);
/* keep in sync with eaglectl */
struct uea_stats {
@@ -174,10 +211,34 @@ struct uea_softc {
#define ELSA_PID_PSTFIRM 0x3350
#define ELSA_PID_PREFIRM 0x3351
+#define ELSA_PID_A_PREFIRM 0x3352
+#define ELSA_PID_A_PSTFIRM 0x3353
+#define ELSA_PID_B_PREFIRM 0x3362
+#define ELSA_PID_B_PSTFIRM 0x3363
+
/*
- * Sagem USB IDs
+ * Devolo IDs : pots if (pid & 0x10)
*/
-#define EAGLE_VID 0x1110
+#define DEVOLO_VID 0x1039
+#define DEVOLO_EAGLE_I_A_PID_PSTFIRM 0x2110
+#define DEVOLO_EAGLE_I_A_PID_PREFIRM 0x2111
+
+#define DEVOLO_EAGLE_I_B_PID_PSTFIRM 0x2100
+#define DEVOLO_EAGLE_I_B_PID_PREFIRM 0x2101
+
+#define DEVOLO_EAGLE_II_A_PID_PSTFIRM 0x2130
+#define DEVOLO_EAGLE_II_A_PID_PREFIRM 0x2131
+
+#define DEVOLO_EAGLE_II_B_PID_PSTFIRM 0x2120
+#define DEVOLO_EAGLE_II_B_PID_PREFIRM 0x2121
+
+/*
+ * Reference design USB IDs
+ */
+#define ANALOG_VID 0x1110
+#define ADI930_PID_PREFIRM 0x9001
+#define ADI930_PID_PSTFIRM 0x9000
+
#define EAGLE_I_PID_PREFIRM 0x9010 /* Eagle I */
#define EAGLE_I_PID_PSTFIRM 0x900F /* Eagle I */
@@ -187,12 +248,12 @@ struct uea_softc {
#define EAGLE_II_PID_PREFIRM 0x9022 /* Eagle II */
#define EAGLE_II_PID_PSTFIRM 0x9021 /* Eagle II */
-/*
- * Eagle III Pid
- */
#define EAGLE_III_PID_PREFIRM 0x9032 /* Eagle III */
#define EAGLE_III_PID_PSTFIRM 0x9031 /* Eagle III */
+#define EAGLE_IV_PID_PREFIRM 0x9042 /* Eagle IV */
+#define EAGLE_IV_PID_PSTFIRM 0x9041 /* Eagle IV */
+
/*
* USR USB IDs
*/
@@ -208,11 +269,15 @@ struct uea_softc {
#define PREFIRM 0
#define PSTFIRM (1<<7)
+#define AUTO_ANNEX_A (1<<8)
+#define AUTO_ANNEX_B (1<<9)
+
enum {
ADI930 = 0,
EAGLE_I,
EAGLE_II,
- EAGLE_III
+ EAGLE_III,
+ EAGLE_IV
};
/* macros for both struct usb_device_id and struct uea_softc */
@@ -221,15 +286,18 @@ enum {
#define UEA_CHIP_VERSION(x) \
((x)->driver_info & 0xf)
-#define IS_ISDN(usb_dev) \
- (le16_to_cpu((usb_dev)->descriptor.bcdDevice) & 0x80)
+#define IS_ISDN(x) \
+ ((x)->annex & ANNEXB)
#define INS_TO_USBDEV(ins) ins->usb_dev
#define GET_STATUS(data) \
((data >> 8) & 0xf)
+
#define IS_OPERATIONAL(sc) \
- (GET_STATUS(sc->stats.phy.state) == 2)
+ ((UEA_CHIP_VERSION(sc) != EAGLE_IV) ? \
+ (GET_STATUS(sc->stats.phy.state) == 2) : \
+ (sc->stats.phy.state == 7))
/*
* Set of macros to handle unaligned data in the firmware blob.
@@ -259,7 +327,8 @@ enum {
#define UEA_INTR_PIPE 0x04
#define UEA_ISO_DATA_PIPE 0x08
-#define UEA_SET_BLOCK 0x0001
+#define UEA_E1_SET_BLOCK 0x0001
+#define UEA_E4_SET_BLOCK 0x002c
#define UEA_SET_MODE 0x0003
#define UEA_SET_2183_DATA 0x0004
#define UEA_SET_TIMEOUT 0x0011
@@ -275,71 +344,179 @@ enum {
#define UEA_MPTX_MAILBOX (0x3fd6 | 0x4000)
#define UEA_MPRX_MAILBOX (0x3fdf | 0x4000)
-/* structure describing a block within a DSP page */
-struct block_info {
+/* block information in eagle4 dsp firmware */
+struct block_index {
+ __le32 PageOffset;
+ __le32 NotLastBlock;
+ __le32 dummy;
+ __le32 PageSize;
+ __le32 PageAddress;
+ __le16 dummy1;
+ __le16 PageNumber;
+} __attribute__ ((packed));
+
+#define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
+#define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
+
+#define E4_L1_STRING_HEADER 0x10
+#define E4_MAX_PAGE_NUMBER 0x58
+#define E4_NO_SWAPPAGE_HEADERS 0x31
+
+/* l1_code is eagle4 dsp firmware format */
+struct l1_code {
+ u8 string_header[E4_L1_STRING_HEADER];
+ u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
+ struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
+ u8 code [0];
+} __attribute__ ((packed));
+
+/* structures describing a block within a DSP page */
+struct block_info_e1 {
__le16 wHdr;
-#define UEA_BIHDR 0xabcd
__le16 wAddress;
__le16 wSize;
__le16 wOvlOffset;
__le16 wOvl; /* overlay */
__le16 wLast;
} __attribute__ ((packed));
-#define BLOCK_INFO_SIZE 12
+#define E1_BLOCK_INFO_SIZE 12
+
+struct block_info_e4 {
+ __be16 wHdr;
+ __u8 bBootPage;
+ __u8 bPageNumber;
+ __be32 dwSize;
+ __be32 dwAddress;
+ __be16 wReserved;
+} __attribute__ ((packed));
+#define E4_BLOCK_INFO_SIZE 14
-/* structure representing a CMV (Configuration and Management Variable) */
-struct cmv {
- __le16 wPreamble;
-#define PREAMBLE 0x535c
- __u8 bDirection;
-#define MODEMTOHOST 0x01
-#define HOSTTOMODEM 0x10
- __u8 bFunction;
-#define FUNCTION_TYPE(f) ((f) >> 4)
-#define MEMACCESS 0x1
-#define ADSLDIRECTIVE 0x7
+#define UEA_BIHDR 0xabcd
+#define UEA_RESERVED 0xffff
+
+/* constants describing cmv type */
+#define E1_PREAMBLE 0x535c
+#define E1_MODEMTOHOST 0x01
+#define E1_HOSTTOMODEM 0x10
+
+#define E1_MEMACCESS 0x1
+#define E1_ADSLDIRECTIVE 0x7
+#define E1_FUNCTION_TYPE(f) ((f) >> 4)
+#define E1_FUNCTION_SUBTYPE(f) ((f) & 0x0f)
+
+#define E4_MEMACCESS 0
+#define E4_ADSLDIRECTIVE 0xf
+#define E4_FUNCTION_TYPE(f) ((f) >> 8)
+#define E4_FUNCTION_SIZE(f) ((f) & 0x0f)
+#define E4_FUNCTION_SUBTYPE(f) (((f) >> 4) & 0x0f)
-#define FUNCTION_SUBTYPE(f) ((f) & 0x0f)
/* for MEMACCESS */
-#define REQUESTREAD 0x0
-#define REQUESTWRITE 0x1
-#define REPLYREAD 0x2
-#define REPLYWRITE 0x3
+#define E1_REQUESTREAD 0x0
+#define E1_REQUESTWRITE 0x1
+#define E1_REPLYREAD 0x2
+#define E1_REPLYWRITE 0x3
+
+#define E4_REQUESTREAD 0x0
+#define E4_REQUESTWRITE 0x4
+#define E4_REPLYREAD (E4_REQUESTREAD | 1)
+#define E4_REPLYWRITE (E4_REQUESTWRITE | 1)
+
/* for ADSLDIRECTIVE */
-#define KERNELREADY 0x0
-#define MODEMREADY 0x1
+#define E1_KERNELREADY 0x0
+#define E1_MODEMREADY 0x1
-#define MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
- __le16 wIndex;
- __le32 dwSymbolicAddress;
-#define MAKESA(a, b, c, d) \
+#define E4_KERNELREADY 0x0
+#define E4_MODEMREADY 0x1
+
+#define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
+#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | ((st) & 0xf) << 4 | ((s) & 0xf))
+
+#define E1_MAKESA(a, b, c, d) \
(((c) & 0xff) << 24 | \
((d) & 0xff) << 16 | \
((a) & 0xff) << 8 | \
((b) & 0xff))
-#define GETSA1(a) ((a >> 8) & 0xff)
-#define GETSA2(a) (a & 0xff)
-#define GETSA3(a) ((a >> 24) & 0xff)
-#define GETSA4(a) ((a >> 16) & 0xff)
-
-#define SA_CNTL MAKESA('C', 'N', 'T', 'L')
-#define SA_DIAG MAKESA('D', 'I', 'A', 'G')
-#define SA_INFO MAKESA('I', 'N', 'F', 'O')
-#define SA_OPTN MAKESA('O', 'P', 'T', 'N')
-#define SA_RATE MAKESA('R', 'A', 'T', 'E')
-#define SA_STAT MAKESA('S', 'T', 'A', 'T')
+
+#define E1_GETSA1(a) ((a >> 8) & 0xff)
+#define E1_GETSA2(a) (a & 0xff)
+#define E1_GETSA3(a) ((a >> 24) & 0xff)
+#define E1_GETSA4(a) ((a >> 16) & 0xff)
+
+#define E1_SA_CNTL E1_MAKESA('C', 'N', 'T', 'L')
+#define E1_SA_DIAG E1_MAKESA('D', 'I', 'A', 'G')
+#define E1_SA_INFO E1_MAKESA('I', 'N', 'F', 'O')
+#define E1_SA_OPTN E1_MAKESA('O', 'P', 'T', 'N')
+#define E1_SA_RATE E1_MAKESA('R', 'A', 'T', 'E')
+#define E1_SA_STAT E1_MAKESA('S', 'T', 'A', 'T')
+
+#define E4_SA_CNTL 1
+#define E4_SA_STAT 2
+#define E4_SA_INFO 3
+#define E4_SA_TEST 4
+#define E4_SA_OPTN 5
+#define E4_SA_RATE 6
+#define E4_SA_DIAG 7
+#define E4_SA_CNFG 8
+
+/* structures representing a CMV (Configuration and Management Variable) */
+struct cmv_e1 {
+ __le16 wPreamble;
+ __u8 bDirection;
+ __u8 bFunction;
+ __le16 wIndex;
+ __le32 dwSymbolicAddress;
__le16 wOffsetAddress;
__le32 dwData;
} __attribute__ ((packed));
-#define CMV_SIZE 16
-/* structure representing swap information */
-struct swap_info {
+struct cmv_e4 {
+ __be16 wGroup;
+ __be16 wFunction;
+ __be16 wOffset;
+ __be16 wAddress;
+ __be32 dwData [6];
+} __attribute__ ((packed));
+
+/* structures representing swap information */
+struct swap_info_e1 {
__u8 bSwapPageNo;
__u8 bOvl; /* overlay */
} __attribute__ ((packed));
-/* structure representing interrupt data */
+struct swap_info_e4 {
+ __u8 bSwapPageNo;
+} __attribute__ ((packed));
+
+/* structures representing interrupt data */
+#define e1_bSwapPageNo u.e1.s1.swapinfo.bSwapPageNo
+#define e1_bOvl u.e1.s1.swapinfo.bOvl
+#define e4_bSwapPageNo u.e4.s1.swapinfo.bSwapPageNo
+
+#define INT_LOADSWAPPAGE 0x0001
+#define INT_INCOMINGCMV 0x0002
+
+union intr_data_e1 {
+ struct {
+ struct swap_info_e1 swapinfo;
+ __le16 wDataSize;
+ } __attribute__ ((packed)) s1;
+ struct {
+ struct cmv_e1 cmv;
+ __le16 wDataSize;
+ } __attribute__ ((packed)) s2;
+} __attribute__ ((packed));
+
+union intr_data_e4 {
+ struct {
+ struct swap_info_e4 swapinfo;
+ __le16 wDataSize;
+ } __attribute__ ((packed)) s1;
+ struct {
+ struct cmv_e4 cmv;
+ __le16 wDataSize;
+ } __attribute__ ((packed)) s2;
+} __attribute__ ((packed));
+
struct intr_pkt {
__u8 bType;
__u8 bNotification;
@@ -347,43 +524,48 @@ struct intr_pkt {
__le16 wIndex;
__le16 wLength;
__le16 wInterrupt;
-#define INT_LOADSWAPPAGE 0x0001
-#define INT_INCOMINGCMV 0x0002
union {
- struct {
- struct swap_info swapinfo;
- __le16 wDataSize;
- } __attribute__ ((packed)) s1;
-
- struct {
- struct cmv cmv;
- __le16 wDataSize;
- } __attribute__ ((packed)) s2;
- } __attribute__ ((packed)) u;
-#define bSwapPageNo u.s1.swapinfo.bSwapPageNo
-#define bOvl u.s1.swapinfo.bOvl
+ union intr_data_e1 e1;
+ union intr_data_e4 e4;
+ } u;
} __attribute__ ((packed));
-#define INTR_PKT_SIZE 28
+
+#define E1_INTR_PKT_SIZE 28
+#define E4_INTR_PKT_SIZE 64
static struct usb_driver uea_driver;
static DEFINE_MUTEX(uea_mutex);
-static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"};
+static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
static int modem_index;
static unsigned int debug;
-static int use_iso[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = 1};
+static unsigned int altsetting[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
static int sync_wait[NB_MODEM];
static char *cmv_file[NB_MODEM];
+static int annex[NB_MODEM];
module_param(debug, uint, 0644);
MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
-module_param_array(use_iso, bool, NULL, 0644);
-MODULE_PARM_DESC(use_iso, "use isochronous usb pipe for incoming traffic");
+module_param_array(altsetting, uint, NULL, 0644);
+MODULE_PARM_DESC(altsetting, "alternate setting for incoming traffic: 0=bulk, "
+ "1=isoc slowest, ... , 8=isoc fastest (default)");
module_param_array(sync_wait, bool, NULL, 0644);
MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
module_param_array(cmv_file, charp, NULL, 0644);
MODULE_PARM_DESC(cmv_file,
"file name with configuration and management variables");
+module_param_array(annex, uint, NULL, 0644);
+MODULE_PARM_DESC(annex,
+ "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
+
+#define uea_wait(sc, cond, timeo) \
+({ \
+ int _r = wait_event_interruptible_timeout(sc->sync_q, \
+ (cond) || kthread_should_stop(), timeo); \
+ if (kthread_should_stop()) \
+ _r = -ENODEV; \
+ _r; \
+})
#define UPDATE_ATM_STAT(type, val) \
do { \
@@ -519,6 +701,9 @@ static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
case EAGLE_III:
fw_name = FW_DIR "eagleIII.fw";
break;
+ case EAGLE_IV:
+ fw_name = FW_DIR "eagleIV.fw";
+ break;
}
ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, usb, uea_upload_pre_firmware);
@@ -537,7 +722,7 @@ static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
/*
* Make sure that the DSP code provided is safe to use.
*/
-static int check_dsp(u8 *dsp, unsigned int len)
+static int check_dsp_e1(u8 *dsp, unsigned int len)
{
u8 pagecount, blockcount;
u16 blocksize;
@@ -588,6 +773,51 @@ static int check_dsp(u8 *dsp, unsigned int len)
return 0;
}
+static int check_dsp_e4(u8 *dsp, int len)
+{
+ int i;
+ struct l1_code *p = (struct l1_code *) dsp;
+ unsigned int sum = p->code - dsp;
+
+ if (len < sum)
+ return 1;
+
+ if (strcmp("STRATIPHY ANEXA", p->string_header) != 0 &&
+ strcmp("STRATIPHY ANEXB", p->string_header) != 0)
+ return 1;
+
+ for (i = 0; i < E4_MAX_PAGE_NUMBER; i++) {
+ struct block_index *blockidx;
+ u8 blockno = p->page_number_to_block_index[i];
+ if (blockno >= E4_NO_SWAPPAGE_HEADERS)
+ continue;
+
+ do {
+ u64 l;
+
+ if (blockno >= E4_NO_SWAPPAGE_HEADERS)
+ return 1;
+
+ blockidx = &p->page_header[blockno++];
+ if ((u8 *)(blockidx + 1) - dsp >= len)
+ return 1;
+
+ if (le16_to_cpu(blockidx->PageNumber) != i)
+ return 1;
+
+ l = E4_PAGE_BYTES(blockidx->PageSize);
+ sum += l;
+ l += le32_to_cpu(blockidx->PageOffset);
+ if (l > len)
+ return 1;
+
+ /* zero is zero regardless endianes */
+ } while (blockidx->NotLastBlock);
+ }
+
+ return (sum == len) ? 0 : 1;
+}
+
/*
* send data to the idma pipe
* */
@@ -624,13 +854,18 @@ static int request_dsp(struct uea_softc *sc)
int ret;
char *dsp_name;
- if (UEA_CHIP_VERSION(sc) == ADI930) {
- if (IS_ISDN(sc->usb_dev))
+ if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+ if (IS_ISDN(sc))
+ dsp_name = FW_DIR "DSP4i.bin";
+ else
+ dsp_name = FW_DIR "DSP4p.bin";
+ } else if (UEA_CHIP_VERSION(sc) == ADI930) {
+ if (IS_ISDN(sc))
dsp_name = FW_DIR "DSP9i.bin";
else
dsp_name = FW_DIR "DSP9p.bin";
} else {
- if (IS_ISDN(sc->usb_dev))
+ if (IS_ISDN(sc))
dsp_name = FW_DIR "DSPei.bin";
else
dsp_name = FW_DIR "DSPep.bin";
@@ -640,11 +875,16 @@ static int request_dsp(struct uea_softc *sc)
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
"requesting firmware %s failed with error %d\n",
- dsp_name, ret);
+ dsp_name, ret);
return ret;
}
- if (check_dsp(sc->dsp_firm->data, sc->dsp_firm->size)) {
+ if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+ ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size);
+ else
+ ret = check_dsp_e1(sc->dsp_firm->data, sc->dsp_firm->size);
+
+ if (ret) {
uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
dsp_name);
release_firmware(sc->dsp_firm);
@@ -658,12 +898,12 @@ static int request_dsp(struct uea_softc *sc)
/*
* The uea_load_page() function must be called within a process context
*/
-static void uea_load_page(struct work_struct *work)
+static void uea_load_page_e1(struct work_struct *work)
{
struct uea_softc *sc = container_of(work, struct uea_softc, task);
u16 pageno = sc->pageno;
u16 ovl = sc->ovl;
- struct block_info bi;
+ struct block_info_e1 bi;
u8 *p;
u8 pagecount, blockcount;
@@ -716,7 +956,7 @@ static void uea_load_page(struct work_struct *work)
bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);
/* send block info through the IDMA pipe */
- if (uea_idma_write(sc, &bi, BLOCK_INFO_SIZE))
+ if (uea_idma_write(sc, &bi, E1_BLOCK_INFO_SIZE))
goto bad2;
/* send block data through the IDMA pipe */
@@ -735,17 +975,114 @@ bad1:
uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
}
+static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
+{
+ struct block_info_e4 bi;
+ struct block_index *blockidx;
+ struct l1_code *p = (struct l1_code *) sc->dsp_firm->data;
+ u8 blockno = p->page_number_to_block_index[pageno];
+
+ bi.wHdr = cpu_to_be16(UEA_BIHDR);
+ bi.bBootPage = boot;
+ bi.bPageNumber = pageno;
+ bi.wReserved = cpu_to_be16(UEA_RESERVED);
+
+ do {
+ u8 *blockoffset;
+ unsigned int blocksize;
+
+ blockidx = &p->page_header[blockno];
+ blocksize = E4_PAGE_BYTES(blockidx->PageSize);
+ blockoffset = sc->dsp_firm->data + le32_to_cpu(blockidx->PageOffset);
+
+ bi.dwSize = cpu_to_be32(blocksize);
+ bi.dwAddress = swab32(blockidx->PageAddress);
+
+ uea_dbg(INS_TO_USBDEV(sc),
+ "sending block %u for DSP page %u size %u adress %x\n",
+ blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress));
+
+ /* send block info through the IDMA pipe */
+ if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
+ goto bad;
+
+ /* send block data through the IDMA pipe */
+ if (uea_idma_write(sc, blockoffset, blocksize))
+ goto bad;
+
+ blockno++;
+ } while (blockidx->NotLastBlock);
+
+ return;
+
+bad:
+ uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", blockno);
+ return;
+}
+
+static void uea_load_page_e4(struct work_struct *work)
+{
+ struct uea_softc *sc = container_of(work, struct uea_softc, task);
+ u8 pageno = sc->pageno;
+ int i;
+ struct block_info_e4 bi;
+ struct l1_code *p;
+
+ uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);
+
+ /* reload firmware when reboot start and it's loaded already */
+ if (pageno == 0 && sc->dsp_firm) {
+ release_firmware(sc->dsp_firm);
+ sc->dsp_firm = NULL;
+ }
+
+ if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
+ return;
+
+ p = (struct l1_code *) sc->dsp_firm->data;
+ if (pageno >= p->page_header[0].PageNumber) {
+ uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
+ return;
+ }
+
+ if (pageno != 0) {
+ __uea_load_page_e4(sc, pageno, 0);
+ return;
+ }
+
+ uea_dbg(INS_TO_USBDEV(sc),
+ "sending Main DSP page %u\n", p->page_header[0].PageNumber);
+
+ for (i = 0; i < le16_to_cpu(p->page_header[0].PageNumber); i++) {
+ if (E4_IS_BOOT_PAGE(p->page_header[i].PageSize))
+ __uea_load_page_e4(sc, i, 1);
+ }
+
+ uea_dbg(INS_TO_USBDEV(sc),"sending start bi\n");
+
+ bi.wHdr = cpu_to_be16(UEA_BIHDR);
+ bi.bBootPage = 0;
+ bi.bPageNumber = 0xff;
+ bi.wReserved = cpu_to_be16(UEA_RESERVED);
+ bi.dwSize = cpu_to_be32(E4_PAGE_BYTES(p->page_header[0].PageSize));
+ bi.dwAddress = swab32(p->page_header[0].PageAddress);
+
+ /* send block info through the IDMA pipe */
+ if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
+ uea_err(INS_TO_USBDEV(sc), "sending DSP start bi failed\n");
+}
+
static inline void wake_up_cmv_ack(struct uea_softc *sc)
{
BUG_ON(sc->cmv_ack);
sc->cmv_ack = 1;
- wake_up(&sc->cmv_ack_wait);
+ wake_up(&sc->sync_q);
}
static inline int wait_cmv_ack(struct uea_softc *sc)
{
- int ret = wait_event_interruptible_timeout(sc->cmv_ack_wait,
- sc->cmv_ack, ACK_TIMEOUT);
+ int ret = uea_wait(sc, sc->cmv_ack , ACK_TIMEOUT);
+
sc->cmv_ack = 0;
uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
@@ -792,33 +1129,68 @@ static int uea_request(struct uea_softc *sc,
return 0;
}
-static int uea_cmv(struct uea_softc *sc,
+static int uea_cmv_e1(struct uea_softc *sc,
u8 function, u32 address, u16 offset, u32 data)
{
- struct cmv cmv;
+ struct cmv_e1 cmv;
int ret;
uea_enters(INS_TO_USBDEV(sc));
uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
"offset : 0x%04x, data : 0x%08x\n",
- FUNCTION_TYPE(function), FUNCTION_SUBTYPE(function),
- GETSA1(address), GETSA2(address), GETSA3(address),
- GETSA4(address), offset, data);
+ E1_FUNCTION_TYPE(function), E1_FUNCTION_SUBTYPE(function),
+ E1_GETSA1(address), E1_GETSA2(address), E1_GETSA3(address),
+ E1_GETSA4(address), offset, data);
+
/* we send a request, but we expect a reply */
- sc->cmv_function = function | 0x2;
- sc->cmv_idx++;
- sc->cmv_address = address;
- sc->cmv_offset = offset;
+ sc->cmv_dsc.e1.function = function | 0x2;
+ sc->cmv_dsc.e1.idx++;
+ sc->cmv_dsc.e1.address = address;
+ sc->cmv_dsc.e1.offset = offset;
- cmv.wPreamble = cpu_to_le16(PREAMBLE);
- cmv.bDirection = HOSTTOMODEM;
+ cmv.wPreamble = cpu_to_le16(E1_PREAMBLE);
+ cmv.bDirection = E1_HOSTTOMODEM;
cmv.bFunction = function;
- cmv.wIndex = cpu_to_le16(sc->cmv_idx);
+ cmv.wIndex = cpu_to_le16(sc->cmv_dsc.e1.idx);
put_unaligned(cpu_to_le32(address), &cmv.dwSymbolicAddress);
cmv.wOffsetAddress = cpu_to_le16(offset);
put_unaligned(cpu_to_le32(data >> 16 | data << 16), &cmv.dwData);
- ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv);
+ ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
+ if (ret < 0)
+ return ret;
+ ret = wait_cmv_ack(sc);
+ uea_leaves(INS_TO_USBDEV(sc));
+ return ret;
+}
+
+static int uea_cmv_e4(struct uea_softc *sc,
+ u16 function, u16 group, u16 address, u16 offset, u32 data)
+{
+ struct cmv_e4 cmv;
+ int ret;
+
+ uea_enters(INS_TO_USBDEV(sc));
+ memset(&cmv, 0, sizeof(cmv));
+
+ uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Group : 0x%04x, "
+ "Address : 0x%04x, offset : 0x%04x, data : 0x%08x\n",
+ E4_FUNCTION_TYPE(function), E4_FUNCTION_SUBTYPE(function),
+ group, address, offset, data);
+
+ /* we send a request, but we expect a reply */
+ sc->cmv_dsc.e4.function = function | (0x1 << 4);
+ sc->cmv_dsc.e4.offset = offset;
+ sc->cmv_dsc.e4.address = address;
+ sc->cmv_dsc.e4.group = group;
+
+ cmv.wFunction = cpu_to_be16(function);
+ cmv.wGroup = cpu_to_be16(group);
+ cmv.wAddress = cpu_to_be16(address);
+ cmv.wOffset = cpu_to_be16(offset);
+ cmv.dwData[0] = cpu_to_be32(data);
+
+ ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
if (ret < 0)
return ret;
ret = wait_cmv_ack(sc);
@@ -826,10 +1198,10 @@ static int uea_cmv(struct uea_softc *sc,
return ret;
}
-static inline int uea_read_cmv(struct uea_softc *sc,
+static inline int uea_read_cmv_e1(struct uea_softc *sc,
u32 address, u16 offset, u32 *data)
{
- int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTREAD),
+ int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTREAD),
address, offset, 0);
if (ret < 0)
uea_err(INS_TO_USBDEV(sc),
@@ -840,10 +1212,27 @@ static inline int uea_read_cmv(struct uea_softc *sc,
return ret;
}
-static inline int uea_write_cmv(struct uea_softc *sc,
+static inline int uea_read_cmv_e4(struct uea_softc *sc,
+ u8 size, u16 group, u16 address, u16 offset, u32 *data)
+{
+ int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTREAD, size),
+ group, address, offset, 0);
+ if (ret < 0)
+ uea_err(INS_TO_USBDEV(sc),
+ "reading cmv failed with error %d\n", ret);
+ else {
+ *data = sc->data;
+ /* size is in 16-bit word quantities */
+ if (size > 2)
+ *(data + 1) = sc->data1;
+ }
+ return ret;
+}
+
+static inline int uea_write_cmv_e1(struct uea_softc *sc,
u32 address, u16 offset, u32 data)
{
- int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTWRITE),
+ int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTWRITE),
address, offset, data);
if (ret < 0)
uea_err(INS_TO_USBDEV(sc),
@@ -852,12 +1241,48 @@ static inline int uea_write_cmv(struct uea_softc *sc,
return ret;
}
+static inline int uea_write_cmv_e4(struct uea_softc *sc,
+ u8 size, u16 group, u16 address, u16 offset, u32 data)
+{
+ int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTWRITE, size),
+ group, address, offset, data);
+ if (ret < 0)
+ uea_err(INS_TO_USBDEV(sc),
+ "writing cmv failed with error %d\n", ret);
+
+ return ret;
+}
+
+static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
+{
+ int ret;
+ u16 timeout;
+
+ /* in bulk mode the modem have problem with high rate
+ * changing internal timing could improve things, but the
+ * value is misterious.
+ * ADI930 don't support it (-EPIPE error).
+ */
+
+ if (UEA_CHIP_VERSION(sc) == ADI930 ||
+ altsetting[sc->modem_index] > 0 ||
+ sc->stats.phy.dsrate == dsrate)
+ return;
+
+ /* Original timming (1Mbit/s) from ADI (used in windows driver) */
+ timeout = (dsrate <= 1024*1024) ? 0 : 1;
+ ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
+ uea_info(INS_TO_USBDEV(sc), "setting new timeout %d%s\n",
+ timeout, ret < 0 ? " failed" : "");
+
+}
+
/*
* Monitor the modem and update the stat
* return 0 if everything is ok
* return < 0 if an error occurs (-EAGAIN reboot needed)
*/
-static int uea_stat(struct uea_softc *sc)
+static int uea_stat_e1(struct uea_softc *sc)
{
u32 data;
int ret;
@@ -865,7 +1290,7 @@ static int uea_stat(struct uea_softc *sc)
uea_enters(INS_TO_USBDEV(sc));
data = sc->stats.phy.state;
- ret = uea_read_cmv(sc, SA_STAT, 0, &sc->stats.phy.state);
+ ret = uea_read_cmv_e1(sc, E1_SA_STAT, 0, &sc->stats.phy.state);
if (ret < 0)
return ret;
@@ -885,7 +1310,7 @@ static int uea_stat(struct uea_softc *sc)
case 3: /* fail ... */
uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
- " (may be try other cmv/dsp)\n");
+ " (may be try other cmv/dsp)\n");
return -EAGAIN;
case 4 ... 6: /* test state */
@@ -923,7 +1348,7 @@ static int uea_stat(struct uea_softc *sc)
/* wake up processes waiting for synchronization */
wake_up(&sc->sync_q);
- ret = uea_read_cmv(sc, SA_DIAG, 2, &sc->stats.phy.flags);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 2, &sc->stats.phy.flags);
if (ret < 0)
return ret;
sc->stats.phy.mflags |= sc->stats.phy.flags;
@@ -937,105 +1362,223 @@ static int uea_stat(struct uea_softc *sc)
return 0;
}
- ret = uea_read_cmv(sc, SA_RATE, 0, &data);
+ ret = uea_read_cmv_e1(sc, E1_SA_RATE, 0, &data);
if (ret < 0)
return ret;
- /* in bulk mode the modem have problem with high rate
- * changing internal timing could improve things, but the
- * value is misterious.
- * ADI930 don't support it (-EPIPE error).
- */
- if (UEA_CHIP_VERSION(sc) != ADI930
- && !use_iso[sc->modem_index]
- && sc->stats.phy.dsrate != (data >> 16) * 32) {
- /* Original timming from ADI(used in windows driver)
- * 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits
- */
- u16 timeout = (data <= 0x20ffff) ? 0 : 1;
- ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
- uea_info(INS_TO_USBDEV(sc),
- "setting new timeout %d%s\n", timeout,
- ret < 0?" failed":"");
- }
+ uea_set_bulk_timeout(sc, (data >> 16) * 32);
sc->stats.phy.dsrate = (data >> 16) * 32;
sc->stats.phy.usrate = (data & 0xffff) * 32;
UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
- ret = uea_read_cmv(sc, SA_DIAG, 23, &data);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 23, &data);
if (ret < 0)
return ret;
sc->stats.phy.dsattenuation = (data & 0xff) / 2;
- ret = uea_read_cmv(sc, SA_DIAG, 47, &data);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 47, &data);
if (ret < 0)
return ret;
sc->stats.phy.usattenuation = (data & 0xff) / 2;
- ret = uea_read_cmv(sc, SA_DIAG, 25, &sc->stats.phy.dsmargin);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 25, &sc->stats.phy.dsmargin);
if (ret < 0)
return ret;
- ret = uea_read_cmv(sc, SA_DIAG, 49, &sc->stats.phy.usmargin);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 49, &sc->stats.phy.usmargin);
if (ret < 0)
return ret;
- ret = uea_read_cmv(sc, SA_DIAG, 51, &sc->stats.phy.rxflow);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 51, &sc->stats.phy.rxflow);
if (ret < 0)
return ret;
- ret = uea_read_cmv(sc, SA_DIAG, 52, &sc->stats.phy.txflow);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 52, &sc->stats.phy.txflow);
if (ret < 0)
return ret;
- ret = uea_read_cmv(sc, SA_DIAG, 54, &sc->stats.phy.dsunc);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 54, &sc->stats.phy.dsunc);
if (ret < 0)
return ret;
/* only for atu-c */
- ret = uea_read_cmv(sc, SA_DIAG, 58, &sc->stats.phy.usunc);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 58, &sc->stats.phy.usunc);
if (ret < 0)
return ret;
- ret = uea_read_cmv(sc, SA_DIAG, 53, &sc->stats.phy.dscorr);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 53, &sc->stats.phy.dscorr);
if (ret < 0)
return ret;
/* only for atu-c */
- ret = uea_read_cmv(sc, SA_DIAG, 57, &sc->stats.phy.uscorr);
+ ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 57, &sc->stats.phy.uscorr);
if (ret < 0)
return ret;
- ret = uea_read_cmv(sc, SA_INFO, 8, &sc->stats.phy.vidco);
+ ret = uea_read_cmv_e1(sc, E1_SA_INFO, 8, &sc->stats.phy.vidco);
if (ret < 0)
return ret;
- ret = uea_read_cmv(sc, SA_INFO, 13, &sc->stats.phy.vidcpe);
+ ret = uea_read_cmv_e1(sc, E1_SA_INFO, 13, &sc->stats.phy.vidcpe);
if (ret < 0)
return ret;
return 0;
}
-static int request_cmvs(struct uea_softc *sc,
- struct uea_cmvs **cmvs, const struct firmware **fw)
+static int uea_stat_e4(struct uea_softc *sc)
{
- int ret, size;
- u8 *data;
+ u32 data;
+ u32 tmp_arr[2];
+ int ret;
+
+ uea_enters(INS_TO_USBDEV(sc));
+ data = sc->stats.phy.state;
+
+ /* XXX only need to be done before operationnal... */
+ ret = uea_read_cmv_e4(sc, 1, E4_SA_STAT, 0, 0, &sc->stats.phy.state);
+ if (ret < 0)
+ return ret;
+
+ switch (sc->stats.phy.state) {
+ case 0x0: /* not yet synchronized */
+ case 0x1:
+ case 0x3:
+ case 0x4:
+ uea_dbg(INS_TO_USBDEV(sc), "modem not yet synchronized\n");
+ return 0;
+ case 0x5: /* initialization */
+ case 0x6:
+ case 0x9:
+ case 0xa:
+ uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+ return 0;
+ case 0x2: /* fail ... */
+ uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
+ " (may be try other cmv/dsp)\n");
+ return -EAGAIN;
+ case 0x7: /* operational */
+ break;
+ default:
+ uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n", sc->stats.phy.state);
+ return 0;
+ }
+
+ if (data != 7) {
+ uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
+ uea_info(INS_TO_USBDEV(sc), "modem operational\n");
+
+ /* release the dsp firmware as it is not needed until
+ * the next failure
+ */
+ if (sc->dsp_firm) {
+ release_firmware(sc->dsp_firm);
+ sc->dsp_firm = NULL;
+ }
+ }
+
+ /* always update it as atm layer could not be init when we switch to
+ * operational state
+ */
+ UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND);
+
+ /* wake up processes waiting for synchronization */
+ wake_up(&sc->sync_q);
+
+ /* TODO improve this state machine :
+ * we need some CMV info : what they do and their unit
+ * we should find the equivalent of eagle3- CMV
+ */
+ /* check flags */
+ ret = uea_read_cmv_e4(sc, 1, E4_SA_DIAG, 0, 0, &sc->stats.phy.flags);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.mflags |= sc->stats.phy.flags;
+
+ /* in case of a flags ( for example delineation LOSS (& 0x10)),
+ * we check the status again in order to detect the failure earlier
+ */
+ if (sc->stats.phy.flags) {
+ uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
+ sc->stats.phy.flags);
+ if (sc->stats.phy.flags & 1) //delineation LOSS
+ return -EAGAIN;
+ if (sc->stats.phy.flags & 0x4000) //Reset Flag
+ return -EAGAIN;
+ return 0;
+ }
+
+ /* rate data may be in upper or lower half of 64 bit word, strange */
+ ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 0, 0, tmp_arr);
+ if (ret < 0)
+ return ret;
+ data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
+ sc->stats.phy.usrate = data / 1000;
+
+ ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 1, 0, tmp_arr);
+ if (ret < 0)
+ return ret;
+ data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
+ uea_set_bulk_timeout(sc, data / 1000);
+ sc->stats.phy.dsrate = data / 1000;
+ UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
+
+ ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 1, &data);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.dsattenuation = data / 10;
+
+ ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 1, &data);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.usattenuation = data / 10;
+
+ ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 3, &data);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.dsmargin = data / 2;
+
+ ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 3, &data);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.usmargin = data / 10;
+
+ return 0;
+}
+
+static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver)
+{
+ char file_arr[] = "CMVxy.bin";
char *file;
- char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+ /* set proper name corresponding modem version and line type */
if (cmv_file[sc->modem_index] == NULL) {
if (UEA_CHIP_VERSION(sc) == ADI930)
- file = (IS_ISDN(sc->usb_dev)) ? "CMV9i.bin" : "CMV9p.bin";
+ file_arr[3] = '9';
+ else if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+ file_arr[3] = '4';
else
- file = (IS_ISDN(sc->usb_dev)) ? "CMVei.bin" : "CMVep.bin";
+ file_arr[3] = 'e';
+
+ file_arr[4] = IS_ISDN(sc) ? 'i' : 'p';
+ file = file_arr;
} else
file = cmv_file[sc->modem_index];
strcpy(cmv_name, FW_DIR);
- strlcat(cmv_name, file, sizeof(cmv_name));
+ strlcat(cmv_name, file, FIRMWARE_NAME_MAX);
+ if (ver == 2)
+ strlcat(cmv_name, ".v2", FIRMWARE_NAME_MAX);
+}
+
+static int request_cmvs_old(struct uea_softc *sc,
+ void **cmvs, const struct firmware **fw)
+{
+ int ret, size;
+ u8 *data;
+ char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+ cmvs_file_name(sc, cmv_name, 1);
ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
@@ -1045,16 +1588,197 @@ static int request_cmvs(struct uea_softc *sc,
}
data = (u8 *) (*fw)->data;
- size = *data * sizeof(struct uea_cmvs) + 1;
- if (size != (*fw)->size) {
- uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
- cmv_name);
- release_firmware(*fw);
- return -EILSEQ;
+ size = (*fw)->size;
+ if (size < 1)
+ goto err_fw_corrupted;
+
+ if (size != *data * sizeof(struct uea_cmvs_v1) + 1)
+ goto err_fw_corrupted;
+
+ *cmvs = (void *)(data + 1);
+ return *data;
+
+err_fw_corrupted:
+ uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
+ release_firmware(*fw);
+ return -EILSEQ;
+}
+
+static int request_cmvs(struct uea_softc *sc,
+ void **cmvs, const struct firmware **fw, int *ver)
+{
+ int ret, size;
+ u32 crc;
+ u8 *data;
+ char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+
+ cmvs_file_name(sc, cmv_name, 2);
+ ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
+ if (ret < 0) {
+ /* if caller can handle old version, try to provide it */
+ if (*ver == 1) {
+ uea_warn(INS_TO_USBDEV(sc), "requesting firmware %s failed, "
+ "try to get older cmvs\n", cmv_name);
+ return request_cmvs_old(sc, cmvs, fw);
+ }
+ uea_err(INS_TO_USBDEV(sc),
+ "requesting firmware %s failed with error %d\n",
+ cmv_name, ret);
+ return ret;
+ }
+
+ size = (*fw)->size;
+ data = (u8 *) (*fw)->data;
+ if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
+ if (*ver == 1) {
+ uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted, "
+ "try to get older cmvs\n", cmv_name);
+ release_firmware(*fw);
+ return request_cmvs_old(sc, cmvs, fw);
+ }
+ goto err_fw_corrupted;
}
- *cmvs = (struct uea_cmvs *)(data + 1);
+ *ver = 2;
+
+ data += 4;
+ size -= 4;
+ if (size < 5)
+ goto err_fw_corrupted;
+
+ crc = FW_GET_LONG(data);
+ data += 4;
+ size -= 4;
+ if (crc32_be(0, data, size) != crc)
+ goto err_fw_corrupted;
+
+ if (size != *data * sizeof(struct uea_cmvs_v2) + 1)
+ goto err_fw_corrupted;
+
+ *cmvs = (void *) (data + 1);
return *data;
+
+err_fw_corrupted:
+ uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
+ release_firmware(*fw);
+ return -EILSEQ;
+}
+
+static int uea_send_cmvs_e1(struct uea_softc *sc)
+{
+ int i, ret, len;
+ void *cmvs_ptr;
+ const struct firmware *cmvs_fw;
+ int ver = 1; // we can handle v1 cmv firmware version;
+
+ /* Enter in R-IDLE (cmv) until instructed otherwise */
+ ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
+ if (ret < 0)
+ return ret;
+
+ /* Dump firmware version */
+ ret = uea_read_cmv_e1(sc, E1_SA_INFO, 10, &sc->stats.phy.firmid);
+ if (ret < 0)
+ return ret;
+ uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+ sc->stats.phy.firmid);
+
+ /* get options */
+ ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+ if (ret < 0)
+ return ret;
+
+ /* send options */
+ if (ver == 1) {
+ struct uea_cmvs_v1 *cmvs_v1 = cmvs_ptr;
+
+ uea_warn(INS_TO_USBDEV(sc), "use deprecated cmvs version, "
+ "please update your firmware\n");
+
+ for (i = 0; i < len; i++) {
+ ret = uea_write_cmv_e1(sc, FW_GET_LONG(&cmvs_v1[i].address),
+ FW_GET_WORD(&cmvs_v1[i].offset),
+ FW_GET_LONG(&cmvs_v1[i].data));
+ if (ret < 0)
+ goto out;
+ }
+ } else if (ver == 2) {
+ struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
+
+ for (i = 0; i < len; i++) {
+ ret = uea_write_cmv_e1(sc, FW_GET_LONG(&cmvs_v2[i].address),
+ (u16) FW_GET_LONG(&cmvs_v2[i].offset),
+ FW_GET_LONG(&cmvs_v2[i].data));
+ if (ret < 0)
+ goto out;
+ }
+ } else {
+ /* This realy should not happen */
+ uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
+ goto out;
+ }
+
+ /* Enter in R-ACT-REQ */
+ ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
+ uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
+ uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+out:
+ release_firmware(cmvs_fw);
+ return ret;
+}
+
+static int uea_send_cmvs_e4(struct uea_softc *sc)
+{
+ int i, ret, len;
+ void *cmvs_ptr;
+ const struct firmware *cmvs_fw;
+ int ver = 2; // we can only handle v2 cmv firmware version;
+
+ /* Enter in R-IDLE (cmv) until instructed otherwise */
+ ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
+ if (ret < 0)
+ return ret;
+
+ /* Dump firmware version */
+ /* XXX don't read the 3th byte as it is always 6 */
+ ret = uea_read_cmv_e4(sc, 2, E4_SA_INFO, 55, 0, &sc->stats.phy.firmid);
+ if (ret < 0)
+ return ret;
+ uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+ sc->stats.phy.firmid);
+
+
+ /* get options */
+ ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+ if (ret < 0)
+ return ret;
+
+ /* send options */
+ if (ver == 2) {
+ struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
+
+ for (i = 0; i < len; i++) {
+ ret = uea_write_cmv_e4(sc, 1,
+ FW_GET_LONG(&cmvs_v2[i].group),
+ FW_GET_LONG(&cmvs_v2[i].address),
+ FW_GET_LONG(&cmvs_v2[i].offset),
+ FW_GET_LONG(&cmvs_v2[i].data));
+ if (ret < 0)
+ goto out;
+ }
+ } else {
+ /* This realy should not happen */
+ uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
+ goto out;
+ }
+
+ /* Enter in R-ACT-REQ */
+ ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
+ uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
+ uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+out:
+ release_firmware(cmvs_fw);
+ return ret;
}
/* Start boot post firmware modem:
@@ -1066,9 +1790,7 @@ static int request_cmvs(struct uea_softc *sc,
static int uea_start_reset(struct uea_softc *sc)
{
u16 zero = 0; /* ;-) */
- int i, len, ret;
- struct uea_cmvs *cmvs;
- const struct firmware *cmvs_fw;
+ int ret;
uea_enters(INS_TO_USBDEV(sc));
uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
@@ -1093,25 +1815,36 @@ static int uea_start_reset(struct uea_softc *sc)
uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
/* original driver use 200ms, but windows driver use 100ms */
- msleep(100);
+ ret = uea_wait(sc, 0, msecs_to_jiffies(100));
+ if (ret < 0)
+ return ret;
/* leave reset mode */
uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
- /* clear tx and rx mailboxes */
- uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
- uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
- uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
+ if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
+ /* clear tx and rx mailboxes */
+ uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
+ uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
+ uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
+ }
+
+ ret = uea_wait(sc, 0, msecs_to_jiffies(1000));
+ if (ret < 0)
+ return ret;
+
+ if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+ sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1);
+ else
+ sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY);
- msleep(1000);
- sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY);
/* demask interrupt */
sc->booting = 0;
/* start loading DSP */
sc->pageno = 0;
sc->ovl = 0;
- schedule_work(&sc->task);
+ queue_work(sc->work_q, &sc->task);
/* wait for modem ready CMV */
ret = wait_cmv_ack(sc);
@@ -1120,38 +1853,10 @@ static int uea_start_reset(struct uea_softc *sc)
uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
- /* Enter in R-IDLE (cmv) until instructed otherwise */
- ret = uea_write_cmv(sc, SA_CNTL, 0, 1);
- if (ret < 0)
- return ret;
-
- /* Dump firmware version */
- ret = uea_read_cmv(sc, SA_INFO, 10, &sc->stats.phy.firmid);
+ ret = sc->send_cmvs(sc);
if (ret < 0)
return ret;
- uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
- sc->stats.phy.firmid);
- /* get options */
- ret = len = request_cmvs(sc, &cmvs, &cmvs_fw);
- if (ret < 0)
- return ret;
-
- /* send options */
- for (i = 0; i < len; i++) {
- ret = uea_write_cmv(sc, FW_GET_LONG(&cmvs[i].address),
- FW_GET_WORD(&cmvs[i].offset),
- FW_GET_LONG(&cmvs[i].data));
- if (ret < 0)
- goto out;
- }
- /* Enter in R-ACT-REQ */
- ret = uea_write_cmv(sc, SA_CNTL, 0, 2);
- uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
- uea_info(INS_TO_USBDEV(sc), "Modem started, "
- "waiting synchronization\n");
-out:
- release_firmware(cmvs_fw);
sc->reset = 0;
uea_leaves(INS_TO_USBDEV(sc));
return ret;
@@ -1174,12 +1879,10 @@ static int uea_kthread(void *data)
if (ret < 0 || sc->reset)
ret = uea_start_reset(sc);
if (!ret)
- ret = uea_stat(sc);
+ ret = sc->stat(sc);
if (ret != -EAGAIN)
- msleep_interruptible(1000);
- if (try_to_freeze())
- uea_err(INS_TO_USBDEV(sc), "suspend/resume not supported, "
- "please unplug/replug your modem\n");
+ uea_wait(sc, 0, msecs_to_jiffies(1000));
+ try_to_freeze();
}
uea_leaves(INS_TO_USBDEV(sc));
return ret;
@@ -1234,7 +1937,6 @@ static int load_XILINX_firmware(struct uea_softc *sc)
if (ret < 0)
uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret);
-
err1:
release_firmware(fw_entry);
err0:
@@ -1243,40 +1945,41 @@ err0:
}
/* The modem send us an ack. First with check if it right */
-static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
+static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
{
+ struct cmv_dsc_e1 *dsc = &sc->cmv_dsc.e1;
+ struct cmv_e1 *cmv = &intr->u.e1.s2.cmv;
+
uea_enters(INS_TO_USBDEV(sc));
- if (le16_to_cpu(cmv->wPreamble) != PREAMBLE)
+ if (le16_to_cpu(cmv->wPreamble) != E1_PREAMBLE)
goto bad1;
- if (cmv->bDirection != MODEMTOHOST)
+ if (cmv->bDirection != E1_MODEMTOHOST)
goto bad1;
/* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
* the first MEMACESS cmv. Ignore it...
*/
- if (cmv->bFunction != sc->cmv_function) {
+ if (cmv->bFunction != dsc->function) {
if (UEA_CHIP_VERSION(sc) == ADI930
- && cmv->bFunction == MAKEFUNCTION(2, 2)) {
- cmv->wIndex = cpu_to_le16(sc->cmv_idx);
- put_unaligned(cpu_to_le32(sc->cmv_address), &cmv->dwSymbolicAddress);
- cmv->wOffsetAddress = cpu_to_le16(sc->cmv_offset);
- }
- else
+ && cmv->bFunction == E1_MAKEFUNCTION(2, 2)) {
+ cmv->wIndex = cpu_to_le16(dsc->idx);
+ put_unaligned(cpu_to_le32(dsc->address), &cmv->dwSymbolicAddress);
+ cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
+ } else
goto bad2;
}
- if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) {
+ if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY)) {
wake_up_cmv_ack(sc);
uea_leaves(INS_TO_USBDEV(sc));
return;
}
/* in case of MEMACCESS */
- if (le16_to_cpu(cmv->wIndex) != sc->cmv_idx ||
- le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) !=
- sc->cmv_address
- || le16_to_cpu(cmv->wOffsetAddress) != sc->cmv_offset)
+ if (le16_to_cpu(cmv->wIndex) != dsc->idx ||
+ le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) != dsc->address ||
+ le16_to_cpu(cmv->wOffsetAddress) != dsc->offset)
goto bad2;
sc->data = le32_to_cpu(get_unaligned(&cmv->dwData));
@@ -1289,8 +1992,8 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
bad2:
uea_err(INS_TO_USBDEV(sc), "unexpected cmv received,"
"Function : %d, Subfunction : %d\n",
- FUNCTION_TYPE(cmv->bFunction),
- FUNCTION_SUBTYPE(cmv->bFunction));
+ E1_FUNCTION_TYPE(cmv->bFunction),
+ E1_FUNCTION_SUBTYPE(cmv->bFunction));
uea_leaves(INS_TO_USBDEV(sc));
return;
@@ -1301,6 +2004,61 @@ bad1:
uea_leaves(INS_TO_USBDEV(sc));
}
+/* The modem send us an ack. First with check if it right */
+static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr)
+{
+ struct cmv_dsc_e4 *dsc = &sc->cmv_dsc.e4;
+ struct cmv_e4 *cmv = &intr->u.e4.s2.cmv;
+
+ uea_enters(INS_TO_USBDEV(sc));
+ uea_dbg(INS_TO_USBDEV(sc), "cmv %x %x %x %x %x %x\n",
+ be16_to_cpu(cmv->wGroup), be16_to_cpu(cmv->wFunction),
+ be16_to_cpu(cmv->wOffset), be16_to_cpu(cmv->wAddress),
+ be32_to_cpu(cmv->dwData[0]), be32_to_cpu(cmv->dwData[1]));
+
+ if (be16_to_cpu(cmv->wFunction) != dsc->function)
+ goto bad2;
+
+ if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1)) {
+ wake_up_cmv_ack(sc);
+ uea_leaves(INS_TO_USBDEV(sc));
+ return;
+ }
+
+ /* in case of MEMACCESS */
+ if (be16_to_cpu(cmv->wOffset) != dsc->offset ||
+ be16_to_cpu(cmv->wGroup) != dsc->group ||
+ be16_to_cpu(cmv->wAddress) != dsc->address)
+ goto bad2;
+
+ sc->data = be32_to_cpu(cmv->dwData[0]);
+ sc->data1 = be32_to_cpu(cmv->dwData[1]);
+ wake_up_cmv_ack(sc);
+ uea_leaves(INS_TO_USBDEV(sc));
+ return;
+
+bad2:
+ uea_err(INS_TO_USBDEV(sc), "unexpected cmv received,"
+ "Function : %d, Subfunction : %d\n",
+ E4_FUNCTION_TYPE(cmv->wFunction),
+ E4_FUNCTION_SUBTYPE(cmv->wFunction));
+ uea_leaves(INS_TO_USBDEV(sc));
+ return;
+}
+
+static void uea_schedule_load_page_e1(struct uea_softc *sc, struct intr_pkt *intr)
+{
+ sc->pageno = intr->e1_bSwapPageNo;
+ sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
+ queue_work(sc->work_q, &sc->task);
+}
+
+static void uea_schedule_load_page_e4(struct uea_softc *sc, struct intr_pkt *intr)
+{
+ sc->pageno = intr->e4_bSwapPageNo;
+ queue_work(sc->work_q, &sc->task);
+}
+
/*
* interrupt handler
*/
@@ -1326,13 +2084,11 @@ static void uea_intr(struct urb *urb)
switch (le16_to_cpu(intr->wInterrupt)) {
case INT_LOADSWAPPAGE:
- sc->pageno = intr->bSwapPageNo;
- sc->ovl = intr->bOvl >> 4 | intr->bOvl << 4;
- schedule_work(&sc->task);
+ sc->schedule_load_page(sc, intr);
break;
case INT_INCOMINGCMV:
- uea_dispatch_cmv(sc, &intr->u.s2.cmv);
+ sc->dispatch_cmv(sc, intr);
break;
default:
@@ -1349,35 +2105,55 @@ resubmit:
*/
static int uea_boot(struct uea_softc *sc)
{
- int ret;
+ int ret, size;
struct intr_pkt *intr;
uea_enters(INS_TO_USBDEV(sc));
- INIT_WORK(&sc->task, uea_load_page);
+ if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+ size = E4_INTR_PKT_SIZE;
+ sc->dispatch_cmv = uea_dispatch_cmv_e4;
+ sc->schedule_load_page = uea_schedule_load_page_e4;
+ sc->stat = uea_stat_e4;
+ sc->send_cmvs = uea_send_cmvs_e4;
+ INIT_WORK(&sc->task, uea_load_page_e4);
+ } else {
+ size = E1_INTR_PKT_SIZE;
+ sc->dispatch_cmv = uea_dispatch_cmv_e1;
+ sc->schedule_load_page = uea_schedule_load_page_e1;
+ sc->stat = uea_stat_e1;
+ sc->send_cmvs = uea_send_cmvs_e1;
+ INIT_WORK(&sc->task, uea_load_page_e1);
+ }
+
init_waitqueue_head(&sc->sync_q);
- init_waitqueue_head(&sc->cmv_ack_wait);
+
+ sc->work_q = create_workqueue("ueagle-dsp");
+ if (!sc->work_q) {
+ uea_err(INS_TO_USBDEV(sc), "cannot allocate workqueue\n");
+ uea_leaves(INS_TO_USBDEV(sc));
+ return -ENOMEM;
+ }
if (UEA_CHIP_VERSION(sc) == ADI930)
load_XILINX_firmware(sc);
- intr = kmalloc(INTR_PKT_SIZE, GFP_KERNEL);
+ intr = kmalloc(size, GFP_KERNEL);
if (!intr) {
uea_err(INS_TO_USBDEV(sc),
"cannot allocate interrupt package\n");
- uea_leaves(INS_TO_USBDEV(sc));
- return -ENOMEM;
+ goto err0;
}
sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
if (!sc->urb_int) {
uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n");
- goto err;
+ goto err1;
}
usb_fill_int_urb(sc->urb_int, sc->usb_dev,
usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
- intr, INTR_PKT_SIZE, uea_intr, sc,
+ intr, size, uea_intr, sc,
sc->usb_dev->actconfig->interface[0]->altsetting[0].
endpoint[0].desc.bInterval);
@@ -1385,7 +2161,7 @@ static int uea_boot(struct uea_softc *sc)
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
"urb submition failed with error %d\n", ret);
- goto err;
+ goto err1;
}
sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
@@ -1399,10 +2175,12 @@ static int uea_boot(struct uea_softc *sc)
err2:
usb_kill_urb(sc->urb_int);
-err:
+err1:
usb_free_urb(sc->urb_int);
sc->urb_int = NULL;
kfree(intr);
+err0:
+ destroy_workqueue(sc->work_q);
uea_leaves(INS_TO_USBDEV(sc));
return -ENOMEM;
}
@@ -1417,15 +2195,15 @@ static void uea_stop(struct uea_softc *sc)
ret = kthread_stop(sc->kthread);
uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
- /* stop any pending boot process */
- flush_scheduled_work();
-
uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
usb_kill_urb(sc->urb_int);
kfree(sc->urb_int->transfer_buffer);
usb_free_urb(sc->urb_int);
+ /* stop any pending boot process, when no one can schedule work */
+ destroy_workqueue(sc->work_q);
+
if (sc->dsp_firm)
release_firmware(sc->dsp_firm);
uea_leaves(INS_TO_USBDEV(sc));
@@ -1487,6 +2265,7 @@ static ssize_t read_human_status(struct device *dev, struct device_attribute *at
char *buf)
{
int ret = -ENODEV;
+ int modem_state;
struct uea_softc *sc;
mutex_lock(&uea_mutex);
@@ -1494,7 +2273,34 @@ static ssize_t read_human_status(struct device *dev, struct device_attribute *at
if (!sc)
goto out;
- switch (GET_STATUS(sc->stats.phy.state)) {
+ if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+ switch (sc->stats.phy.state) {
+ case 0x0: /* not yet synchronized */
+ case 0x1:
+ case 0x3:
+ case 0x4:
+ modem_state = 0;
+ break;
+ case 0x5: /* initialization */
+ case 0x6:
+ case 0x9:
+ case 0xa:
+ modem_state = 1;
+ break;
+ case 0x7: /* operational */
+ modem_state = 2;
+ break;
+ case 0x2: /* fail ... */
+ modem_state = 3;
+ break;
+ default: /* unknown */
+ modem_state = 4;
+ break;
+ }
+ } else
+ modem_state = GET_STATUS(sc->stats.phy.state);
+
+ switch (modem_state) {
case 0:
ret = sprintf(buf, "Modem is booting\n");
break;
@@ -1504,9 +2310,12 @@ static ssize_t read_human_status(struct device *dev, struct device_attribute *at
case 2:
ret = sprintf(buf, "Modem is operational\n");
break;
- default:
+ case 3:
ret = sprintf(buf, "Modem synchronization failed\n");
break;
+ default:
+ ret = sprintf(buf, "Modem state is unknown\n");
+ break;
}
out:
mutex_unlock(&uea_mutex);
@@ -1520,18 +2329,26 @@ static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
{
int ret = -ENODEV;
struct uea_softc *sc;
+ char *delin = "GOOD";
mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
- if (sc->stats.phy.flags & 0x0C00)
- ret = sprintf(buf, "ERROR\n");
- else if (sc->stats.phy.flags & 0x0030)
- ret = sprintf(buf, "LOSS\n");
- else
- ret = sprintf(buf, "GOOD\n");
+ if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+ if (sc->stats.phy.flags & 0x4000)
+ delin = "RESET";
+ else if (sc->stats.phy.flags & 0x0001)
+ delin = "LOSS";
+ } else {
+ if (sc->stats.phy.flags & 0x0C00)
+ delin = "ERROR";
+ else if (sc->stats.phy.flags & 0x0030)
+ delin = "LOSS";
+ }
+
+ ret = sprintf(buf, "%s\n", delin);
out:
mutex_unlock(&uea_mutex);
return ret;
@@ -1662,6 +2479,7 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
struct usb_device *usb = interface_to_usbdev(intf);
struct uea_softc *sc;
int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
+ unsigned int alt;
uea_enters(usb);
@@ -1696,22 +2514,29 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
sc->driver_info = id->driver_info;
- /* ADI930 don't support iso */
- if (UEA_CHIP_VERSION(id) != ADI930 && use_iso[sc->modem_index]) {
- int i;
-
- /* try set fastest alternate for inbound traffic interface */
- for (i = FASTEST_ISO_INTF; i > 0; i--)
- if (usb_set_interface(usb, UEA_DS_IFACE_NO, i) == 0)
- break;
+ /* first try to use module parameter */
+ if (annex[sc->modem_index] == 1)
+ sc->annex = ANNEXA;
+ else if (annex[sc->modem_index] == 2)
+ sc->annex = ANNEXB;
+ /* try to autodetect annex */
+ else if (sc->driver_info & AUTO_ANNEX_A)
+ sc->annex = ANNEXA;
+ else if (sc->driver_info & AUTO_ANNEX_B)
+ sc->annex = ANNEXB;
+ else
+ sc->annex = (le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80)?ANNEXB:ANNEXA;
- if (i > 0) {
- uea_dbg(usb, "set alternate %d for 2 interface\n", i);
+ alt = altsetting[sc->modem_index];
+ /* ADI930 don't support iso */
+ if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
+ if (alt <= 8 && usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
+ uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
uea_info(usb, "using iso mode\n");
usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
} else {
- uea_err(usb, "setting any alternate failed for "
- "2 interface, using bulk mode\n");
+ uea_err(usb, "setting alternate %u failed for "
+ "2 interface, using bulk mode\n", alt);
}
}
@@ -1757,10 +2582,11 @@ static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
struct usb_device *usb = interface_to_usbdev(intf);
uea_enters(usb);
- uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) : %s %s\n",
- le16_to_cpu(usb->descriptor.idVendor),
- le16_to_cpu(usb->descriptor.idProduct),
- chip_name[UEA_CHIP_VERSION(id)], IS_ISDN(usb)?"isdn":"pots");
+ uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
+ le16_to_cpu(usb->descriptor.idVendor),
+ le16_to_cpu(usb->descriptor.idProduct),
+ le16_to_cpu(usb->descriptor.bcdDevice),
+ chip_name[UEA_CHIP_VERSION(id)]);
usb_reset_device(usb);
@@ -1793,24 +2619,40 @@ static void uea_disconnect(struct usb_interface *intf)
* List of supported VID/PID
*/
static const struct usb_device_id uea_ids[] = {
+ {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM), .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM), .driver_info = ADI930 | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM), .driver_info = EAGLE_IV | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM), .driver_info = EAGLE_IV | PSTFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
{USB_DEVICE(ELSA_VID, ELSA_PID_PREFIRM), .driver_info = ADI930 | PREFIRM},
{USB_DEVICE(ELSA_VID, ELSA_PID_PSTFIRM), .driver_info = ADI930 | PSTFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM},
- {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_A_PREFIRM), .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_A_PSTFIRM), .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_B_PREFIRM), .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_B_PSTFIRM), .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
{USB_DEVICE(USR_VID, MILLER_A_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
{USB_DEVICE(USR_VID, MILLER_B_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
{USB_DEVICE(USR_VID, HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
{USB_DEVICE(USR_VID, HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
{}
};
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 5192cd9356de..ad632f2d6f94 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -28,6 +28,7 @@
* v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
* v0.13 - alloc space for statusbuf (<status> not on stack);
* use usb_buffer_alloc() for read buf & write buf;
+ * none - Maintained in Linux kernel after v0.13
*/
/*
@@ -69,7 +70,6 @@
#define USBLP_DEVICE_ID_SIZE 1024
/* ioctls: */
-#define LPGETSTATUS 0x060b /* same as in drivers/char/lp.c */
#define IOCNR_GET_DEVICE_ID 1
#define IOCNR_GET_PROTOCOLS 2
#define IOCNR_SET_PROTOCOL 3
@@ -115,7 +115,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H
#define USBLP_MINORS 16
#define USBLP_MINOR_BASE 0
-#define USBLP_WRITE_TIMEOUT (5000) /* 5 seconds */
+#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */
#define USBLP_FIRST_PROTOCOL 1
#define USBLP_LAST_PROTOCOL 3
@@ -159,10 +159,12 @@ struct usblp {
int wstatus; /* bytes written or error */
int rstatus; /* bytes ready or error */
unsigned int quirks; /* quirks flags */
+ unsigned int flags; /* mode flags */
unsigned char used; /* True if open */
unsigned char present; /* True if not disconnected */
unsigned char bidir; /* interface is bidirectional */
unsigned char sleeping; /* interface is suspended */
+ unsigned char no_paper; /* Paper Out happened */
unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */
/* first 2 bytes are (big-endian) length */
};
@@ -259,7 +261,7 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i
retval = usb_control_msg(usblp->dev,
dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
- request, type | dir | recip, value, index, buf, len, USBLP_WRITE_TIMEOUT);
+ request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
dbg("usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d",
request, !!dir, recip, value, index, len, retval);
return retval < 0 ? retval : 0;
@@ -325,13 +327,11 @@ static void usblp_bulk_write(struct urb *urb)
usblp->wstatus = status;
else
usblp->wstatus = urb->actual_length;
+ usblp->no_paper = 0;
usblp->wcomplete = 1;
wake_up(&usblp->wwait);
spin_unlock(&usblp->lock);
- /* XXX Use usb_setup_bulk_urb when available. Talk to Marcel. */
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = NULL; /* Not refcounted, so to be safe... */
usb_free_urb(urb);
}
@@ -346,16 +346,17 @@ static int usblp_check_status(struct usblp *usblp, int err)
unsigned char status, newerr = 0;
int error;
- error = usblp_read_status (usblp, usblp->statusbuf);
- if (error < 0) {
+ mutex_lock(&usblp->mut);
+ if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
+ mutex_unlock(&usblp->mut);
if (printk_ratelimit())
printk(KERN_ERR
"usblp%d: error %d reading printer status\n",
usblp->minor, error);
return 0;
}
-
status = *usblp->statusbuf;
+ mutex_unlock(&usblp->mut);
if (~status & LP_PERRORP)
newerr = 3;
@@ -411,18 +412,10 @@ static int usblp_open(struct inode *inode, struct file *file)
goto out;
/*
- * TODO: need to implement LP_ABORTOPEN + O_NONBLOCK as in drivers/char/lp.c ???
- * This is #if 0-ed because we *don't* want to fail an open
- * just because the printer is off-line.
+ * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
+ * - We do not want persistent state which close(2) does not clear
+ * - It is not used anyway, according to CUPS people
*/
-#if 0
- if ((retval = usblp_check_status(usblp, 0))) {
- retval = retval > 1 ? -EIO : -ENOSPC;
- goto out;
- }
-#else
- retval = 0;
-#endif
retval = usb_autopm_get_interface(intf);
if (retval < 0)
@@ -463,6 +456,8 @@ static int usblp_release(struct inode *inode, struct file *file)
{
struct usblp *usblp = file->private_data;
+ usblp->flags &= ~LP_ABORT;
+
mutex_lock (&usblp_mutex);
usblp->used = 0;
if (usblp->present) {
@@ -485,8 +480,8 @@ static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait
poll_wait(file, &usblp->rwait, wait);
poll_wait(file, &usblp->wwait, wait);
spin_lock_irqsave(&usblp->lock, flags);
- ret = ((!usblp->bidir || !usblp->rcomplete) ? 0 : POLLIN | POLLRDNORM)
- | (!usblp->wcomplete ? 0 : POLLOUT | POLLWRNORM);
+ ret = ((usblp->bidir && usblp->rcomplete) ? POLLIN | POLLRDNORM : 0) |
+ ((usblp->no_paper || usblp->wcomplete) ? POLLOUT | POLLWRNORM : 0);
spin_unlock_irqrestore(&usblp->lock, flags);
return ret;
}
@@ -675,6 +670,13 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
retval = -EFAULT;
break;
+ case LPABORT:
+ if (arg)
+ usblp->flags |= LP_ABORT;
+ else
+ usblp->flags &= ~LP_ABORT;
+ break;
+
default:
retval = -ENOTTY;
}
@@ -684,10 +686,30 @@ done:
return retval;
}
+static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
+{
+ struct urb *urb;
+ char *writebuf;
+
+ if ((writebuf = kmalloc(transfer_length, GFP_KERNEL)) == NULL)
+ return NULL;
+ if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
+ kfree(writebuf);
+ return NULL;
+ }
+
+ usb_fill_bulk_urb(urb, usblp->dev,
+ usb_sndbulkpipe(usblp->dev,
+ usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
+ writebuf, transfer_length, usblp_bulk_write, usblp);
+ urb->transfer_flags |= URB_FREE_BUFFER;
+
+ return urb;
+}
+
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- char *writebuf;
struct urb *writeurb;
int rv;
int transfer_length;
@@ -708,17 +730,11 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
transfer_length = USBLP_BUF_SIZE;
rv = -ENOMEM;
- if ((writebuf = kmalloc(USBLP_BUF_SIZE, GFP_KERNEL)) == NULL)
- goto raise_buf;
- if ((writeurb = usb_alloc_urb(0, GFP_KERNEL)) == NULL)
+ if ((writeurb = usblp_new_writeurb(usblp, transfer_length)) == NULL)
goto raise_urb;
- usb_fill_bulk_urb(writeurb, usblp->dev,
- usb_sndbulkpipe(usblp->dev,
- usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
- writebuf, transfer_length, usblp_bulk_write, usblp);
usb_anchor_urb(writeurb, &usblp->urbs);
- if (copy_from_user(writebuf,
+ if (copy_from_user(writeurb->transfer_buffer,
buffer + writecount, transfer_length)) {
rv = -EFAULT;
goto raise_badaddr;
@@ -730,6 +746,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
usblp->wstatus = 0;
spin_lock_irq(&usblp->lock);
+ usblp->no_paper = 0;
usblp->wcomplete = 1;
wake_up(&usblp->wwait);
spin_unlock_irq(&usblp->lock);
@@ -747,12 +764,17 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
/* Presume that it's going to complete well. */
writecount += transfer_length;
}
+ if (rv == -ENOSPC) {
+ spin_lock_irq(&usblp->lock);
+ usblp->no_paper = 1; /* Mark for poll(2) */
+ spin_unlock_irq(&usblp->lock);
+ writecount += transfer_length;
+ }
/* Leave URB dangling, to be cleaned on close. */
goto collect_error;
}
if (usblp->wstatus < 0) {
- usblp_check_status(usblp, 0);
rv = -EIO;
goto collect_error;
}
@@ -771,8 +793,6 @@ raise_badaddr:
usb_unanchor_urb(writeurb);
usb_free_urb(writeurb);
raise_urb:
- kfree(writebuf);
-raise_buf:
raise_wait:
collect_error: /* Out of raise sequence */
mutex_unlock(&usblp->wmut);
@@ -838,32 +858,36 @@ done:
* when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
* select(2) or poll(2) to wait for the buffer to drain before closing.
* Alternatively, set blocking mode with fcntl and issue a zero-size write.
- *
- * Old v0.13 code had a non-functional timeout for wait_event(). Someone forgot
- * to check the return code for timeout expiration, so it had no effect.
- * Apparently, it was intended to check for error conditons, such as out
- * of paper. It is going to return when we settle things with CUPS. XXX
*/
static int usblp_wwait(struct usblp *usblp, int nonblock)
{
DECLARE_WAITQUEUE(waita, current);
int rc;
+ int err = 0;
add_wait_queue(&usblp->wwait, &waita);
for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
if (mutex_lock_interruptible(&usblp->mut)) {
rc = -EINTR;
break;
}
- set_current_state(TASK_INTERRUPTIBLE);
- if ((rc = usblp_wtest(usblp, nonblock)) < 0) {
- mutex_unlock(&usblp->mut);
- break;
- }
+ rc = usblp_wtest(usblp, nonblock);
mutex_unlock(&usblp->mut);
- if (rc == 0)
+ if (rc <= 0)
break;
- schedule();
+
+ if (usblp->flags & LP_ABORT) {
+ if (schedule_timeout(msecs_to_jiffies(5000)) == 0) {
+ err = usblp_check_status(usblp, err);
+ if (err == 1) { /* Paper out */
+ rc = -ENOSPC;
+ break;
+ }
+ }
+ } else {
+ schedule();
+ }
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&usblp->wwait, &waita);
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index cb69aa1e02e8..1a8edcee7f30 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -507,18 +507,30 @@ void usb_destroy_configuration(struct usb_device *dev)
}
-// hub-only!! ... and only in reset path, or usb_new_device()
-// (used by real hubs and virtual root hubs)
+/*
+ * Get the USB config descriptors, cache and parse'em
+ *
+ * hub-only!! ... and only in reset path, or usb_new_device()
+ * (used by real hubs and virtual root hubs)
+ *
+ * NOTE: if this is a WUSB device and is not authorized, we skip the
+ * whole thing. A non-authorized USB device has no
+ * configurations.
+ */
int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
- int result = -ENOMEM;
+ int result = 0;
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
+ cfgno = 0;
+ if (dev->authorized == 0) /* Not really an error */
+ goto out_not_authorized;
+ result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
@@ -545,14 +557,15 @@ int usb_get_configuration(struct usb_device *dev)
goto err2;
desc = (struct usb_config_descriptor *)buffer;
- for (cfgno = 0; cfgno < ncfg; cfgno++) {
+ result = 0;
+ for (; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
buffer, USB_DT_CONFIG_SIZE);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
- "descriptor/%s\n", cfgno, "start");
+ "descriptor/%s: %d\n", cfgno, "start", result);
dev_err(ddev, "chopping to %d config(s)\n", cfgno);
dev->descriptor.bNumConfigurations = cfgno;
break;
@@ -599,6 +612,7 @@ int usb_get_configuration(struct usb_device *dev)
err:
kfree(buffer);
+out_not_authorized:
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 927a181120a9..e5ad76b4a738 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -71,6 +71,7 @@ struct async {
void __user *userbuffer;
void __user *userurb;
struct urb *urb;
+ int status;
u32 secid;
};
@@ -289,10 +290,8 @@ static void snoop_urb(struct urb *urb, void __user *userurb)
if (!usbfs_snoop)
return;
- if (urb->pipe & USB_DIR_IN)
- dev_info(&urb->dev->dev, "direction=IN\n");
- else
- dev_info(&urb->dev->dev, "direction=OUT\n");
+ dev_info(&urb->dev->dev, "direction=%s\n",
+ usb_urb_dir_in(urb) ? "IN" : "OUT");
dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n",
urb->transfer_buffer_length);
@@ -312,9 +311,10 @@ static void async_completed(struct urb *urb)
spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
spin_unlock(&ps->lock);
+ as->status = urb->status;
if (as->signr) {
sinfo.si_signo = as->signr;
- sinfo.si_errno = as->urb->status;
+ sinfo.si_errno = as->status;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = as->userurb;
kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
@@ -910,6 +910,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
struct usb_ctrlrequest *dr = NULL;
unsigned int u, totlen, isofrmlen;
int ret, ifnum = -1;
+ int is_in;
if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP|USBDEVFS_URB_SHORT_NOT_OK|
URB_NO_FSBR|URB_ZERO_PACKET))
@@ -924,16 +925,18 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
if ((ret = checkintf(ps, ifnum)))
return ret;
}
- if ((uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0)
- ep = ps->dev->ep_in [uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
- else
- ep = ps->dev->ep_out [uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
+ if ((uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0) {
+ is_in = 1;
+ ep = ps->dev->ep_in[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
+ } else {
+ is_in = 0;
+ ep = ps->dev->ep_out[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
+ }
if (!ep)
return -ENOENT;
switch(uurb->type) {
case USBDEVFS_URB_TYPE_CONTROL:
- if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_CONTROL)
+ if (!usb_endpoint_xfer_control(&ep->desc))
return -EINVAL;
/* min 8 byte setup packet, max 8 byte setup plus an arbitrary data stage */
if (uurb->buffer_length < 8 || uurb->buffer_length > (8 + MAX_USBFS_BUFFER_SIZE))
@@ -952,23 +955,32 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
kfree(dr);
return ret;
}
- uurb->endpoint = (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) | (dr->bRequestType & USB_ENDPOINT_DIR_MASK);
uurb->number_of_packets = 0;
uurb->buffer_length = le16_to_cpup(&dr->wLength);
uurb->buffer += 8;
- if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) {
+ if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) {
+ is_in = 1;
+ uurb->endpoint |= USB_DIR_IN;
+ } else {
+ is_in = 0;
+ uurb->endpoint &= ~USB_DIR_IN;
+ }
+ if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+ uurb->buffer, uurb->buffer_length)) {
kfree(dr);
return -EFAULT;
}
snoop(&ps->dev->dev, "control urb: bRequest=%02x "
"bRrequestType=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
- dr->bRequest, dr->bRequestType, dr->wValue,
- dr->wIndex, dr->wLength);
+ dr->bRequest, dr->bRequestType,
+ __le16_to_cpup(&dr->wValue),
+ __le16_to_cpup(&dr->wIndex),
+ __le16_to_cpup(&dr->wLength));
break;
case USBDEVFS_URB_TYPE_BULK:
- switch (ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ switch (usb_endpoint_type(&ep->desc)) {
case USB_ENDPOINT_XFER_CONTROL:
case USB_ENDPOINT_XFER_ISOC:
return -EINVAL;
@@ -977,7 +989,8 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
uurb->number_of_packets = 0;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
+ if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+ uurb->buffer, uurb->buffer_length))
return -EFAULT;
snoop(&ps->dev->dev, "bulk urb\n");
break;
@@ -986,8 +999,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
/* arbitrary limit */
if (uurb->number_of_packets < 1 || uurb->number_of_packets > 128)
return -EINVAL;
- if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_ISOC)
+ if (!usb_endpoint_xfer_isoc(&ep->desc))
return -EINVAL;
isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) * uurb->number_of_packets;
if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
@@ -1014,12 +1026,12 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
case USBDEVFS_URB_TYPE_INTERRUPT:
uurb->number_of_packets = 0;
- if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT)
+ if (!usb_endpoint_xfer_int(&ep->desc))
return -EINVAL;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
+ if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+ uurb->buffer, uurb->buffer_length))
return -EFAULT;
snoop(&ps->dev->dev, "interrupt urb\n");
break;
@@ -1039,8 +1051,11 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
return -ENOMEM;
}
as->urb->dev = ps->dev;
- as->urb->pipe = (uurb->type << 30) | __create_pipe(ps->dev, uurb->endpoint & 0xf) | (uurb->endpoint & USB_DIR_IN);
- as->urb->transfer_flags = uurb->flags;
+ as->urb->pipe = (uurb->type << 30) |
+ __create_pipe(ps->dev, uurb->endpoint & 0xf) |
+ (uurb->endpoint & USB_DIR_IN);
+ as->urb->transfer_flags = uurb->flags |
+ (is_in ? URB_DIR_IN : URB_DIR_OUT);
as->urb->transfer_buffer_length = uurb->buffer_length;
as->urb->setup_packet = (unsigned char*)dr;
as->urb->start_frame = uurb->start_frame;
@@ -1070,13 +1085,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
as->uid = current->uid;
as->euid = current->euid;
security_task_getsecid(current, &as->secid);
- if (!(uurb->endpoint & USB_DIR_IN)) {
- if (copy_from_user(as->urb->transfer_buffer, uurb->buffer, as->urb->transfer_buffer_length)) {
+ if (!is_in) {
+ if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
+ as->urb->transfer_buffer_length)) {
free_async(as);
return -EFAULT;
}
}
- snoop(&as->urb->dev->dev, "submit urb\n");
snoop_urb(as->urb, as->userurb);
async_newpending(as);
if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) {
@@ -1119,14 +1134,14 @@ static int processcompl(struct async *as, void __user * __user *arg)
if (as->userbuffer)
if (copy_to_user(as->userbuffer, urb->transfer_buffer, urb->transfer_buffer_length))
return -EFAULT;
- if (put_user(urb->status, &userurb->status))
+ if (put_user(as->status, &userurb->status))
return -EFAULT;
if (put_user(urb->actual_length, &userurb->actual_length))
return -EFAULT;
if (put_user(urb->error_count, &userurb->error_count))
return -EFAULT;
- if (usb_pipeisoc(urb->pipe)) {
+ if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
for (i = 0; i < urb->number_of_packets; i++) {
if (put_user(urb->iso_frame_desc[i].actual_length,
&userurb->iso_frame_desc[i].actual_length))
@@ -1233,14 +1248,14 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
if (as->userbuffer)
if (copy_to_user(as->userbuffer, urb->transfer_buffer, urb->transfer_buffer_length))
return -EFAULT;
- if (put_user(urb->status, &userurb->status))
+ if (put_user(as->status, &userurb->status))
return -EFAULT;
if (put_user(urb->actual_length, &userurb->actual_length))
return -EFAULT;
if (put_user(urb->error_count, &userurb->error_count))
return -EFAULT;
- if (usb_pipeisoc(urb->pipe)) {
+ if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
for (i = 0; i < urb->number_of_packets; i++) {
if (put_user(urb->iso_frame_desc[i].actual_length,
&userurb->iso_frame_desc[i].actual_length))
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 63b1243a9139..c27bc080d84e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -202,6 +202,11 @@ static int usb_probe_interface(struct device *dev)
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
+ if (udev->authorized == 0) {
+ dev_err(&intf->dev, "Device is not authorized for usage\n");
+ return -ENODEV;
+ }
+
id = usb_match_id(intf, driver->id_table);
if (!id)
id = usb_match_dynamic_id(intf, driver);
@@ -945,11 +950,11 @@ done:
#ifdef CONFIG_USB_SUSPEND
/* Internal routine to check whether we may autosuspend a device. */
-static int autosuspend_check(struct usb_device *udev)
+static int autosuspend_check(struct usb_device *udev, int reschedule)
{
int i;
struct usb_interface *intf;
- unsigned long suspend_time;
+ unsigned long suspend_time, j;
/* For autosuspend, fail fast if anything is in use or autosuspend
* is disabled. Also fail if any interfaces require remote wakeup
@@ -991,20 +996,20 @@ static int autosuspend_check(struct usb_device *udev)
}
/* If everything is okay but the device hasn't been idle for long
- * enough, queue a delayed autosuspend request.
+ * enough, queue a delayed autosuspend request. If the device
+ * _has_ been idle for long enough and the reschedule flag is set,
+ * likewise queue a delayed (1 second) autosuspend request.
*/
- if (time_after(suspend_time, jiffies)) {
+ j = jiffies;
+ if (time_before(j, suspend_time))
+ reschedule = 1;
+ else
+ suspend_time = j + HZ;
+ if (reschedule) {
if (!timer_pending(&udev->autosuspend.timer)) {
-
- /* The value of jiffies may change between the
- * time_after() comparison above and the subtraction
- * below. That's okay; the system behaves sanely
- * when a timer is registered for the present moment
- * or for the past.
- */
queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- round_jiffies_relative(suspend_time - jiffies));
- }
+ round_jiffies_relative(suspend_time - j));
+ }
return -EAGAIN;
}
return 0;
@@ -1012,7 +1017,7 @@ static int autosuspend_check(struct usb_device *udev)
#else
-static inline int autosuspend_check(struct usb_device *udev)
+static inline int autosuspend_check(struct usb_device *udev, int reschedule)
{
return 0;
}
@@ -1069,7 +1074,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->auto_pm) {
- status = autosuspend_check(udev);
+ status = autosuspend_check(udev, 0);
if (status < 0)
goto done;
}
@@ -1083,15 +1088,8 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
break;
}
}
- if (status == 0) {
-
- /* Non-root devices don't need to do anything for FREEZE
- * or PRETHAW. */
- if (udev->parent && (msg.event == PM_EVENT_FREEZE ||
- msg.event == PM_EVENT_PRETHAW))
- goto done;
+ if (status == 0)
status = usb_suspend_device(udev, msg);
- }
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
@@ -1102,12 +1100,24 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
/* Try another autosuspend when the interfaces aren't busy */
if (udev->auto_pm)
- autosuspend_check(udev);
+ autosuspend_check(udev, status == -EBUSY);
- /* If the suspend succeeded, propagate it up the tree */
+ /* If the suspend succeeded then prevent any more URB submissions,
+ * flush any outstanding URBs, and propagate the suspend up the tree.
+ */
} else {
cancel_delayed_work(&udev->autosuspend);
- if (parent)
+ udev->can_submit = 0;
+ for (i = 0; i < 16; ++i) {
+ usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
+ usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
+ }
+
+ /* If this is just a FREEZE or a PRETHAW, udev might
+ * not really be suspended. Only true suspends get
+ * propagated up the device tree.
+ */
+ if (parent && udev->state == USB_STATE_SUSPENDED)
usb_autosuspend_device(parent);
}
@@ -1156,6 +1166,7 @@ static int usb_resume_both(struct usb_device *udev)
status = -ENODEV;
goto done;
}
+ udev->can_submit = 1;
/* Propagate the resume up the tree, if necessary */
if (udev->state == USB_STATE_SUSPENDED) {
@@ -1529,9 +1540,21 @@ int usb_external_resume_device(struct usb_device *udev)
static int usb_suspend(struct device *dev, pm_message_t message)
{
+ struct usb_device *udev;
+
if (!is_usb_device(dev)) /* Ignore PM for interfaces */
return 0;
- return usb_external_suspend_device(to_usb_device(dev), message);
+ udev = to_usb_device(dev);
+
+ /* If udev is already suspended, we can skip this suspend and
+ * we should also skip the upcoming system resume. */
+ if (udev->state == USB_STATE_SUSPENDED) {
+ udev->skip_sys_resume = 1;
+ return 0;
+ }
+
+ udev->skip_sys_resume = 0;
+ return usb_external_suspend_device(udev, message);
}
static int usb_resume(struct device *dev)
@@ -1542,13 +1565,14 @@ static int usb_resume(struct device *dev)
return 0;
udev = to_usb_device(dev);
- /* If autoresume is disabled then we also want to prevent resume
- * during system wakeup. However, a "persistent-device" reset-resume
- * after power loss counts as a wakeup event. So allow a
- * reset-resume to occur if remote wakeup is enabled. */
- if (udev->autoresume_disabled) {
+ /* If udev->skip_sys_resume is set then udev was already suspended
+ * when the system suspend started, so we don't want to resume
+ * udev during this system wakeup. However a reset-resume counts
+ * as a wakeup event, so allow a reset-resume to occur if remote
+ * wakeup is enabled. */
+ if (udev->skip_sys_resume) {
if (!(udev->reset_resume && udev->do_remote_wakeup))
- return -EPERM;
+ return -EHOSTUNREACH;
}
return usb_external_resume_device(udev);
}
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index e0ec7045e865..7dc123d6b2d0 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -267,7 +267,6 @@ static void ep_device_release(struct device *dev)
{
struct ep_device *ep_dev = to_ep_device(dev);
- dev_dbg(dev, "%s called for %s\n", __FUNCTION__, dev->bus_id);
endpoint_free_minor(ep_dev);
kfree(ep_dev);
}
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index b2fc2b115256..c1cb94e9f242 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -40,7 +40,7 @@ static int is_activesync(struct usb_interface_descriptor *desc)
&& desc->bInterfaceProtocol == 1;
}
-static int choose_configuration(struct usb_device *udev)
+int usb_choose_configuration(struct usb_device *udev)
{
int i;
int num_configs;
@@ -161,17 +161,20 @@ static int generic_probe(struct usb_device *udev)
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
- c = choose_configuration(udev);
- if (c >= 0) {
- err = usb_set_configuration(udev, c);
- if (err) {
- dev_err(&udev->dev, "can't set config #%d, error %d\n",
+ if (udev->authorized == 0)
+ dev_err(&udev->dev, "Device is not authorized for usage\n");
+ else {
+ c = usb_choose_configuration(udev);
+ if (c >= 0) {
+ err = usb_set_configuration(udev, c);
+ if (err) {
+ dev_err(&udev->dev, "can't set config #%d, error %d\n",
c, err);
- /* This need not be fatal. The user can try to
- * set other configurations. */
+ /* This need not be fatal. The user can try to
+ * set other configurations. */
+ }
}
}
-
/* USB device state == configured ... usable */
usb_notify_add_device(udev);
@@ -203,8 +206,13 @@ static int generic_suspend(struct usb_device *udev, pm_message_t msg)
*/
if (!udev->parent)
rc = hcd_bus_suspend(udev);
+
+ /* Non-root devices don't need to do anything for FREEZE or PRETHAW */
+ else if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW)
+ rc = 0;
else
rc = usb_port_suspend(udev);
+
return rc;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 42ef1d5f6c8a..3dd997df8505 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -356,10 +356,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
const u8 *bufp = tbuf;
int len = 0;
int patch_wakeup = 0;
- unsigned long flags;
- int status = 0;
+ int status;
int n;
+ might_sleep();
+
+ spin_lock_irq(&hcd_root_hub_lock);
+ status = usb_hcd_link_urb_to_ep(hcd, urb);
+ spin_unlock_irq(&hcd_root_hub_lock);
+ if (status)
+ return status;
+ urb->hcpriv = hcd; /* Indicate it's queued */
+
cmd = (struct usb_ctrlrequest *) urb->setup_packet;
typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
wValue = le16_to_cpu (cmd->wValue);
@@ -523,13 +531,18 @@ error:
}
/* any errors get returned through the urb completion */
- local_irq_save (flags);
- spin_lock (&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
- spin_unlock (&urb->lock);
- usb_hcd_giveback_urb (hcd, urb);
- local_irq_restore (flags);
+ spin_lock_irq(&hcd_root_hub_lock);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ /* This peculiar use of spinlocks echoes what real HC drivers do.
+ * Avoiding calls to local_irq_disable/enable makes the code
+ * RT-friendly.
+ */
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&hcd_root_hub_lock);
+
+ spin_unlock_irq(&hcd_root_hub_lock);
return 0;
}
@@ -559,31 +572,23 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
if (length > 0) {
/* try to complete the status urb */
- local_irq_save (flags);
- spin_lock(&hcd_root_hub_lock);
+ spin_lock_irqsave(&hcd_root_hub_lock, flags);
urb = hcd->status_urb;
if (urb) {
- spin_lock(&urb->lock);
- if (urb->status == -EINPROGRESS) {
- hcd->poll_pending = 0;
- hcd->status_urb = NULL;
- urb->status = 0;
- urb->hcpriv = NULL;
- urb->actual_length = length;
- memcpy(urb->transfer_buffer, buffer, length);
- } else /* urb has been unlinked */
- length = 0;
- spin_unlock(&urb->lock);
- } else
- length = 0;
- spin_unlock(&hcd_root_hub_lock);
+ hcd->poll_pending = 0;
+ hcd->status_urb = NULL;
+ urb->actual_length = length;
+ memcpy(urb->transfer_buffer, buffer, length);
- /* local irqs are always blocked in completions */
- if (length > 0)
- usb_hcd_giveback_urb (hcd, urb);
- else
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, 0);
+ spin_lock(&hcd_root_hub_lock);
+ } else {
+ length = 0;
hcd->poll_pending = 1;
- local_irq_restore (flags);
+ }
+ spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
}
/* The USB 2.0 spec says 256 ms. This is close enough and won't
@@ -611,33 +616,35 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
int len = 1 + (urb->dev->maxchild / 8);
spin_lock_irqsave (&hcd_root_hub_lock, flags);
- if (urb->status != -EINPROGRESS) /* already unlinked */
- retval = urb->status;
- else if (hcd->status_urb || urb->transfer_buffer_length < len) {
+ if (hcd->status_urb || urb->transfer_buffer_length < len) {
dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
retval = -EINVAL;
- } else {
- hcd->status_urb = urb;
- urb->hcpriv = hcd; /* indicate it's queued */
+ goto done;
+ }
- if (!hcd->uses_new_polling)
- mod_timer (&hcd->rh_timer,
- (jiffies/(HZ/4) + 1) * (HZ/4));
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval)
+ goto done;
- /* If a status change has already occurred, report it ASAP */
- else if (hcd->poll_pending)
- mod_timer (&hcd->rh_timer, jiffies);
- retval = 0;
- }
+ hcd->status_urb = urb;
+ urb->hcpriv = hcd; /* indicate it's queued */
+ if (!hcd->uses_new_polling)
+ mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+
+ /* If a status change has already occurred, report it ASAP */
+ else if (hcd->poll_pending)
+ mod_timer(&hcd->rh_timer, jiffies);
+ retval = 0;
+ done:
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
return retval;
}
static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
{
- if (usb_pipeint (urb->pipe))
+ if (usb_endpoint_xfer_int(&urb->ep->desc))
return rh_queue_status (hcd, urb);
- if (usb_pipecontrol (urb->pipe))
+ if (usb_endpoint_xfer_control(&urb->ep->desc))
return rh_call_control (hcd, urb);
return -EINVAL;
}
@@ -647,32 +654,96 @@ static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
/* Unlinks of root-hub control URBs are legal, but they don't do anything
* since these URBs always execute synchronously.
*/
-static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&hcd_root_hub_lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
- if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */
+ if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
; /* Do nothing */
} else { /* Status URB */
if (!hcd->uses_new_polling)
del_timer (&hcd->rh_timer);
- local_irq_save (flags);
- spin_lock (&hcd_root_hub_lock);
if (urb == hcd->status_urb) {
hcd->status_urb = NULL;
- urb->hcpriv = NULL;
- } else
- urb = NULL; /* wasn't fully queued */
- spin_unlock (&hcd_root_hub_lock);
- if (urb)
- usb_hcd_giveback_urb (hcd, urb);
- local_irq_restore (flags);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&hcd_root_hub_lock);
+ }
}
+ done:
+ spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+ return rc;
+}
- return 0;
+
+
+/*
+ * Show & store the current value of authorized_default
+ */
+static ssize_t usb_host_authorized_default_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *rh_usb_dev = to_usb_device(dev);
+ struct usb_bus *usb_bus = rh_usb_dev->bus;
+ struct usb_hcd *usb_hcd;
+
+ if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
+ return -ENODEV;
+ usb_hcd = bus_to_hcd(usb_bus);
+ return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
+}
+
+static ssize_t usb_host_authorized_default_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ ssize_t result;
+ unsigned val;
+ struct usb_device *rh_usb_dev = to_usb_device(dev);
+ struct usb_bus *usb_bus = rh_usb_dev->bus;
+ struct usb_hcd *usb_hcd;
+
+ if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
+ return -ENODEV;
+ usb_hcd = bus_to_hcd(usb_bus);
+ result = sscanf(buf, "%u\n", &val);
+ if (result == 1) {
+ usb_hcd->authorized_default = val? 1 : 0;
+ result = size;
+ }
+ else
+ result = -EINVAL;
+ return result;
}
+static DEVICE_ATTR(authorized_default, 0644,
+ usb_host_authorized_default_show,
+ usb_host_authorized_default_store);
+
+
+/* Group all the USB bus attributes */
+static struct attribute *usb_bus_attrs[] = {
+ &dev_attr_authorized_default.attr,
+ NULL,
+};
+
+static struct attribute_group usb_bus_attr_group = {
+ .name = NULL, /* we want them in the same directory */
+ .attrs = usb_bus_attrs,
+};
+
+
+
/*-------------------------------------------------------------------------*/
static struct class *usb_host_class;
@@ -726,27 +797,23 @@ static void usb_bus_init (struct usb_bus *bus)
*/
static int usb_register_bus(struct usb_bus *bus)
{
+ int result = -E2BIG;
int busnum;
mutex_lock(&usb_bus_list_lock);
busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
- if (busnum < USB_MAXBUS) {
- set_bit (busnum, busmap.busmap);
- bus->busnum = busnum;
- } else {
+ if (busnum >= USB_MAXBUS) {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
- mutex_unlock(&usb_bus_list_lock);
- return -E2BIG;
+ goto error_find_busnum;
}
-
+ set_bit (busnum, busmap.busmap);
+ bus->busnum = busnum;
bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
- bus->controller, "usb_host%d", busnum);
- if (IS_ERR(bus->class_dev)) {
- clear_bit(busnum, busmap.busmap);
- mutex_unlock(&usb_bus_list_lock);
- return PTR_ERR(bus->class_dev);
- }
-
+ bus->controller, "usb_host%d",
+ busnum);
+ result = PTR_ERR(bus->class_dev);
+ if (IS_ERR(bus->class_dev))
+ goto error_create_class_dev;
class_set_devdata(bus->class_dev, bus);
/* Add it to the local list of buses */
@@ -755,8 +822,15 @@ static int usb_register_bus(struct usb_bus *bus)
usb_notify_add_bus(bus);
- dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
+ dev_info (bus->controller, "new USB bus registered, assigned bus "
+ "number %d\n", bus->busnum);
return 0;
+
+error_create_class_dev:
+ clear_bit(busnum, busmap.busmap);
+error_find_busnum:
+ mutex_unlock(&usb_bus_list_lock);
+ return result;
}
/**
@@ -908,103 +982,145 @@ EXPORT_SYMBOL (usb_calc_bus_time);
/*-------------------------------------------------------------------------*/
-static void urb_unlink(struct usb_hcd *hcd, struct urb *urb)
+/**
+ * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being submitted
+ *
+ * Host controller drivers should call this routine in their enqueue()
+ * method. The HCD's private spinlock must be held and interrupts must
+ * be disabled. The actions carried out here are required for URB
+ * submission, as well as for endpoint shutdown and for usb_kill_urb.
+ *
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the enqueue() method must fail). If no error occurs but enqueue() fails
+ * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
+ * the private spinlock and returning.
+ */
+int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
{
- unsigned long flags;
+ int rc = 0;
- /* clear all state linking urb to this dev (and hcd) */
- spin_lock_irqsave(&hcd_urb_list_lock, flags);
- list_del_init (&urb->urb_list);
- spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
+ spin_lock(&hcd_urb_list_lock);
- if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
- if (usb_pipecontrol (urb->pipe)
- && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
- dma_unmap_single (hcd->self.controller, urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
- dma_unmap_single (hcd->self.controller,
- urb->transfer_dma,
- urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
- ? DMA_FROM_DEVICE
- : DMA_TO_DEVICE);
+ /* Check that the URB isn't being killed */
+ if (unlikely(urb->reject)) {
+ rc = -EPERM;
+ goto done;
}
-}
-
-/* may be called in any context with a valid urb->dev usecount
- * caller surrenders "ownership" of urb
- * expects usb_submit_urb() to have sanity checked and conditioned all
- * inputs in the urb
- */
-int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
-{
- int status;
- struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
- struct usb_host_endpoint *ep;
- unsigned long flags;
- if (!hcd)
- return -ENODEV;
+ if (unlikely(!urb->ep->enabled)) {
+ rc = -ENOENT;
+ goto done;
+ }
- usbmon_urb_submit(&hcd->self, urb);
+ if (unlikely(!urb->dev->can_submit)) {
+ rc = -EHOSTUNREACH;
+ goto done;
+ }
/*
- * Atomically queue the urb, first to our records, then to the HCD.
- * Access to urb->status is controlled by urb->lock ... changes on
- * i/o completion (normal or fault) or unlinking.
+ * Check the host controller's state and add the URB to the
+ * endpoint's queue.
*/
-
- // FIXME: verify that quiescing hc works right (RH cleans up)
-
- spin_lock_irqsave(&hcd_urb_list_lock, flags);
- ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (unlikely (!ep))
- status = -ENOENT;
- else if (unlikely (urb->reject))
- status = -EPERM;
- else switch (hcd->state) {
+ switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
- list_add_tail (&urb->urb_list, &ep->urb_list);
- status = 0;
+ urb->unlinked = 0;
+ list_add_tail(&urb->urb_list, &urb->ep->urb_list);
break;
default:
- status = -ESHUTDOWN;
- break;
+ rc = -ESHUTDOWN;
+ goto done;
}
- spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
- if (status) {
- INIT_LIST_HEAD (&urb->urb_list);
- usbmon_urb_submit_error(&hcd->self, urb, status);
- return status;
+ done:
+ spin_unlock(&hcd_urb_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
+
+/**
+ * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being checked for unlinkability
+ * @status: error code to store in @urb if the unlink succeeds
+ *
+ * Host controller drivers should call this routine in their dequeue()
+ * method. The HCD's private spinlock must be held and interrupts must
+ * be disabled. The actions carried out here are required for making
+ * sure than an unlink is valid.
+ *
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the dequeue() method must fail). The possible error codes are:
+ *
+ * -EIDRM: @urb was not submitted or has already completed.
+ * The completion function may not have been called yet.
+ *
+ * -EBUSY: @urb has already been unlinked.
+ */
+int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status)
+{
+ struct list_head *tmp;
+
+ /* insist the urb is still queued */
+ list_for_each(tmp, &urb->ep->urb_list) {
+ if (tmp == &urb->urb_list)
+ break;
}
+ if (tmp != &urb->urb_list)
+ return -EIDRM;
- /* increment urb's reference count as part of giving it to the HCD
- * (which now controls it). HCD guarantees that it either returns
- * an error or calls giveback(), but not both.
+ /* Any status except -EINPROGRESS means something already started to
+ * unlink this URB from the hardware. So there's no more work to do.
*/
- urb = usb_get_urb (urb);
- atomic_inc (&urb->use_count);
-
- if (is_root_hub(urb->dev)) {
- /* NOTE: requirement on hub callers (usbfs and the hub
- * driver, for now) that URBs' urb->transfer_buffer be
- * valid and usb_buffer_{sync,unmap}() not be needed, since
- * they could clobber root hub response data.
- */
- status = rh_urb_enqueue (hcd, urb);
- goto done;
+ if (urb->unlinked)
+ return -EBUSY;
+ urb->unlinked = status;
+
+ /* IRQ setup can easily be broken so that USB controllers
+ * never get completion IRQs ... maybe even the ones we need to
+ * finish unlinking the initial failed usb_set_address()
+ * or device descriptor fetch.
+ */
+ if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
+ !is_root_hub(urb->dev)) {
+ dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
+ "Controller is probably using the wrong IRQ.\n");
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
}
- /* lower level hcd code should use *_dma exclusively,
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
+
+/**
+ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being unlinked
+ *
+ * Host controller drivers should call this routine before calling
+ * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
+ * interrupts must be disabled. The actions carried out here are required
+ * for URB completion.
+ */
+void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
+{
+ /* clear all state linking urb to this dev (and hcd) */
+ spin_lock(&hcd_urb_list_lock);
+ list_del_init(&urb->urb_list);
+ spin_unlock(&hcd_urb_list_lock);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
+
+static void map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ /* Map the URB's buffers for DMA access.
+ * Lower level HCD code should use *_dma exclusively,
* unless it uses pio or talks to another transport.
*/
- if (hcd->self.uses_dma) {
- if (usb_pipecontrol (urb->pipe)
+ if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
urb->setup_dma = dma_map_single (
hcd->self.controller,
@@ -1017,20 +1133,75 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
hcd->self.controller,
urb->transfer_buffer,
urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_urb_dir_in(urb)
? DMA_FROM_DEVICE
: DMA_TO_DEVICE);
}
+}
- status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags);
-done:
- if (unlikely (status)) {
- urb_unlink(hcd, urb);
- atomic_dec (&urb->use_count);
- if (urb->reject)
- wake_up (&usb_kill_urb_queue);
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+ dma_unmap_single(hcd->self.controller, urb->setup_dma,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ if (urb->transfer_buffer_length != 0
+ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ dma_unmap_single(hcd->self.controller,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ usb_urb_dir_in(urb)
+ ? DMA_FROM_DEVICE
+ : DMA_TO_DEVICE);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* may be called in any context with a valid urb->dev usecount
+ * caller surrenders "ownership" of urb
+ * expects usb_submit_urb() to have sanity checked and conditioned all
+ * inputs in the urb
+ */
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
+{
+ int status;
+ struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
+
+ /* increment urb's reference count as part of giving it to the HCD
+ * (which will control it). HCD guarantees that it either returns
+ * an error or calls giveback(), but not both.
+ */
+ usb_get_urb(urb);
+ atomic_inc(&urb->use_count);
+ atomic_inc(&urb->dev->urbnum);
+ usbmon_urb_submit(&hcd->self, urb);
+
+ /* NOTE requirements on root-hub callers (usbfs and the hub
+ * driver, for now): URBs' urb->transfer_buffer must be
+ * valid and usb_buffer_{sync,unmap}() not be needed, since
+ * they could clobber root hub response data. Also, control
+ * URBs must be submitted in process context with interrupts
+ * enabled.
+ */
+ map_urb_for_dma(hcd, urb);
+ if (is_root_hub(urb->dev))
+ status = rh_urb_enqueue(hcd, urb);
+ else
+ status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+
+ if (unlikely(status)) {
usbmon_urb_submit_error(&hcd->self, urb, status);
- usb_put_urb (urb);
+ unmap_urb_for_dma(hcd, urb);
+ urb->hcpriv = NULL;
+ INIT_LIST_HEAD(&urb->urb_list);
+ atomic_dec(&urb->use_count);
+ atomic_dec(&urb->dev->urbnum);
+ if (urb->reject)
+ wake_up(&usb_kill_urb_queue);
+ usb_put_urb(urb);
}
return status;
}
@@ -1042,24 +1213,19 @@ done:
* soon as practical. we've already set up the urb's return status,
* but we can't know if the callback completed already.
*/
-static int
-unlink1 (struct usb_hcd *hcd, struct urb *urb)
+static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
{
int value;
if (is_root_hub(urb->dev))
- value = usb_rh_urb_dequeue (hcd, urb);
+ value = usb_rh_urb_dequeue(hcd, urb, status);
else {
/* The only reason an HCD might fail this call is if
* it has not yet fully queued the urb to begin with.
* Such failures should be harmless. */
- value = hcd->driver->urb_dequeue (hcd, urb);
+ value = hcd->driver->urb_dequeue(hcd, urb, status);
}
-
- if (value != 0)
- dev_dbg (hcd->self.controller, "dequeue %p --> %d\n",
- urb, value);
return value;
}
@@ -1071,88 +1237,17 @@ unlink1 (struct usb_hcd *hcd, struct urb *urb)
*/
int usb_hcd_unlink_urb (struct urb *urb, int status)
{
- struct usb_host_endpoint *ep;
- struct usb_hcd *hcd = NULL;
- struct device *sys = NULL;
- unsigned long flags;
- struct list_head *tmp;
- int retval;
-
- if (!urb)
- return -EINVAL;
- if (!urb->dev || !urb->dev->bus)
- return -ENODEV;
- ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (!ep)
- return -ENODEV;
-
- /*
- * we contend for urb->status with the hcd core,
- * which changes it while returning the urb.
- *
- * Caller guaranteed that the urb pointer hasn't been freed, and
- * that it was submitted. But as a rule it can't know whether or
- * not it's already been unlinked ... so we respect the reversed
- * lock sequence needed for the usb_hcd_giveback_urb() code paths
- * (urb lock, then hcd_urb_list_lock) in case some other CPU is now
- * unlinking it.
- */
- spin_lock_irqsave (&urb->lock, flags);
- spin_lock(&hcd_urb_list_lock);
+ struct usb_hcd *hcd;
+ int retval;
- sys = &urb->dev->dev;
hcd = bus_to_hcd(urb->dev->bus);
- if (hcd == NULL) {
- retval = -ENODEV;
- goto done;
- }
+ retval = unlink1(hcd, urb, status);
- /* insist the urb is still queued */
- list_for_each(tmp, &ep->urb_list) {
- if (tmp == &urb->urb_list)
- break;
- }
- if (tmp != &urb->urb_list) {
- retval = -EIDRM;
- goto done;
- }
-
- /* Any status except -EINPROGRESS means something already started to
- * unlink this URB from the hardware. So there's no more work to do.
- */
- if (urb->status != -EINPROGRESS) {
- retval = -EBUSY;
- goto done;
- }
-
- /* IRQ setup can easily be broken so that USB controllers
- * never get completion IRQs ... maybe even the ones we need to
- * finish unlinking the initial failed usb_set_address()
- * or device descriptor fetch.
- */
- if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
- !is_root_hub(urb->dev)) {
- dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
- "Controller is probably using the wrong IRQ.\n");
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- }
-
- urb->status = status;
-
- spin_unlock(&hcd_urb_list_lock);
- spin_unlock_irqrestore (&urb->lock, flags);
-
- retval = unlink1 (hcd, urb);
if (retval == 0)
retval = -EINPROGRESS;
- return retval;
-
-done:
- spin_unlock(&hcd_urb_list_lock);
- spin_unlock_irqrestore (&urb->lock, flags);
- if (retval != -EIDRM && sys && sys->driver)
- dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval);
+ else if (retval != -EIDRM && retval != -EBUSY)
+ dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
+ urb, retval);
return retval;
}
@@ -1162,6 +1257,7 @@ done:
* usb_hcd_giveback_urb - return URB from HCD to device driver
* @hcd: host controller returning the URB
* @urb: urb being returned to the USB device driver.
+ * @status: completion status code for the URB.
* Context: in_interrupt()
*
* This hands the URB from HCD to its USB device driver, using its
@@ -1169,14 +1265,27 @@ done:
* (and is done using urb->hcpriv). It also released all HCD locks;
* the device driver won't cause problems if it frees, modifies,
* or resubmits this URB.
+ *
+ * If @urb was unlinked, the value of @status will be overridden by
+ * @urb->unlinked. Erroneous short transfers are detected in case
+ * the HCD hasn't checked for them.
*/
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
+void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
{
- urb_unlink(hcd, urb);
- usbmon_urb_complete (&hcd->self, urb);
+ urb->hcpriv = NULL;
+ if (unlikely(urb->unlinked))
+ status = urb->unlinked;
+ else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ urb->actual_length < urb->transfer_buffer_length &&
+ !status))
+ status = -EREMOTEIO;
+
+ unmap_urb_for_dma(hcd, urb);
+ usbmon_urb_complete(&hcd->self, urb, status);
usb_unanchor_urb(urb);
/* pass ownership to the completion handler */
+ urb->status = status;
urb->complete (urb);
atomic_dec (&urb->use_count);
if (unlikely (urb->reject))
@@ -1187,78 +1296,61 @@ EXPORT_SYMBOL (usb_hcd_giveback_urb);
/*-------------------------------------------------------------------------*/
-/* disables the endpoint: cancels any pending urbs, then synchronizes with
- * the hcd to make sure all endpoint state is gone from hardware, and then
- * waits until the endpoint's queue is completely drained. use for
- * set_configuration, set_interface, driver removal, physical disconnect.
- *
- * example: a qh stored in ep->hcpriv, holding state related to endpoint
- * type, maxpacket size, toggle, halt status, and scheduling.
+/* Cancel all URBs pending on this endpoint and wait for the endpoint's
+ * queue to drain completely. The caller must first insure that no more
+ * URBs can be submitted for this endpoint.
*/
-void usb_hcd_endpoint_disable (struct usb_device *udev,
+void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct usb_hcd *hcd;
struct urb *urb;
+ if (!ep)
+ return;
+ might_sleep();
hcd = bus_to_hcd(udev->bus);
- local_irq_disable ();
- /* ep is already gone from udev->ep_{in,out}[]; no more submits */
+ /* No more submits can occur */
rescan:
- spin_lock(&hcd_urb_list_lock);
+ spin_lock_irq(&hcd_urb_list_lock);
list_for_each_entry (urb, &ep->urb_list, urb_list) {
- int tmp;
+ int is_in;
- /* the urb may already have been unlinked */
- if (urb->status != -EINPROGRESS)
+ if (urb->unlinked)
continue;
usb_get_urb (urb);
+ is_in = usb_urb_dir_in(urb);
spin_unlock(&hcd_urb_list_lock);
- spin_lock (&urb->lock);
- tmp = urb->status;
- if (tmp == -EINPROGRESS)
- urb->status = -ESHUTDOWN;
- spin_unlock (&urb->lock);
-
- /* kick hcd unless it's already returning this */
- if (tmp == -EINPROGRESS) {
- tmp = urb->pipe;
- unlink1 (hcd, urb);
- dev_dbg (hcd->self.controller,
- "shutdown urb %p pipe %08x ep%d%s%s\n",
- urb, tmp, usb_pipeendpoint (tmp),
- (tmp & USB_DIR_IN) ? "in" : "out",
- ({ char *s; \
- switch (usb_pipetype (tmp)) { \
- case PIPE_CONTROL: s = ""; break; \
- case PIPE_BULK: s = "-bulk"; break; \
- case PIPE_INTERRUPT: s = "-intr"; break; \
- default: s = "-iso"; break; \
- }; s;}));
- }
+ /* kick hcd */
+ unlink1(hcd, urb, -ESHUTDOWN);
+ dev_dbg (hcd->self.controller,
+ "shutdown urb %p ep%d%s%s\n",
+ urb, usb_endpoint_num(&ep->desc),
+ is_in ? "in" : "out",
+ ({ char *s;
+
+ switch (usb_endpoint_type(&ep->desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ s = ""; break;
+ case USB_ENDPOINT_XFER_BULK:
+ s = "-bulk"; break;
+ case USB_ENDPOINT_XFER_INT:
+ s = "-intr"; break;
+ default:
+ s = "-iso"; break;
+ };
+ s;
+ }));
usb_put_urb (urb);
/* list contents may have changed */
goto rescan;
}
- spin_unlock(&hcd_urb_list_lock);
- local_irq_enable ();
-
- /* synchronize with the hardware, so old configuration state
- * clears out immediately (and will be freed).
- */
- might_sleep ();
- if (hcd->driver->endpoint_disable)
- hcd->driver->endpoint_disable (hcd, ep);
+ spin_unlock_irq(&hcd_urb_list_lock);
- /* Wait until the endpoint queue is completely empty. Most HCDs
- * will have done this already in their endpoint_disable method,
- * but some might not. And there could be root-hub control URBs
- * still pending since they aren't affected by the HCDs'
- * endpoint_disable methods.
- */
+ /* Wait until the endpoint queue is completely empty */
while (!list_empty (&ep->urb_list)) {
spin_lock_irq(&hcd_urb_list_lock);
@@ -1278,6 +1370,25 @@ rescan:
}
}
+/* Disables the endpoint: synchronizes with the hcd to make sure all
+ * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
+ * have been called previously. Use for set_configuration, set_interface,
+ * driver removal, physical disconnect.
+ *
+ * example: a qh stored in ep->hcpriv, holding state related to endpoint
+ * type, maxpacket size, toggle, halt status, and scheduling.
+ */
+void usb_hcd_disable_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd;
+
+ might_sleep();
+ hcd = bus_to_hcd(udev->bus);
+ if (hcd->driver->endpoint_disable)
+ hcd->driver->endpoint_disable(hcd, ep);
+}
+
/*-------------------------------------------------------------------------*/
/* called in any context */
@@ -1525,7 +1636,6 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
hcd->driver = driver;
hcd->product_desc = (driver->product_desc) ? driver->product_desc :
"USB Host Controller";
-
return hcd;
}
EXPORT_SYMBOL (usb_create_hcd);
@@ -1570,6 +1680,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
+ hcd->authorized_default = hcd->wireless? 0 : 1;
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/* HC is in reset state, but accessible. Now do the one-time init,
@@ -1646,10 +1757,20 @@ int usb_add_hcd(struct usb_hcd *hcd,
if ((retval = register_root_hub(hcd)) != 0)
goto err_register_root_hub;
+ retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+ if (retval < 0) {
+ printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
+ retval);
+ goto error_create_attr_group;
+ }
if (hcd->uses_new_polling && hcd->poll_rh)
usb_hcd_poll_rh_status(hcd);
return retval;
+error_create_attr_group:
+ mutex_lock(&usb_bus_list_lock);
+ usb_disconnect(&hcd->self.root_hub);
+ mutex_unlock(&usb_bus_list_lock);
err_register_root_hub:
hcd->driver->stop(hcd);
err_hcd_driver_start:
@@ -1691,6 +1812,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
cancel_work_sync(&hcd->wakeup_work);
#endif
+ sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
mutex_unlock(&usb_bus_list_lock);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index b5ebb73c2332..98e24194a4ab 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -19,6 +19,8 @@
#ifdef __KERNEL__
+#include <linux/rwsem.h>
+
/* This file contains declarations of usbcore internals that are mostly
* used or exposed by Host Controller Drivers.
*/
@@ -51,6 +53,12 @@
*
* Since "struct usb_bus" is so thin, you can't share much code in it.
* This framework is a layer over that, and should be more sharable.
+ *
+ * @authorized_default: Specifies if new devices are authorized to
+ * connect by default or they require explicit
+ * user space authorization; this bit is settable
+ * through /sys/class/usb_host/X/authorized_default.
+ * For the rest is RO, so we don't lock to r/w it.
*/
/*-------------------------------------------------------------------------*/
@@ -90,6 +98,7 @@ struct usb_hcd {
unsigned poll_rh:1; /* poll for rh status? */
unsigned poll_pending:1; /* status has changed? */
unsigned wireless:1; /* Wireless USB HCD */
+ unsigned authorized_default:1;
int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
@@ -182,11 +191,10 @@ struct hc_driver {
int (*get_frame_number) (struct usb_hcd *hcd);
/* manage i/o requests, device state */
- int (*urb_enqueue) (struct usb_hcd *hcd,
- struct usb_host_endpoint *ep,
- struct urb *urb,
- gfp_t mem_flags);
- int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
+ int (*urb_enqueue)(struct usb_hcd *hcd,
+ struct urb *urb, gfp_t mem_flags);
+ int (*urb_dequeue)(struct usb_hcd *hcd,
+ struct urb *urb, int status);
/* hw synch, freeing endpoint resources that urb_dequeue can't */
void (*endpoint_disable)(struct usb_hcd *hcd,
@@ -204,10 +212,18 @@ struct hc_driver {
/* Needed only if port-change IRQs are level-triggered */
};
+extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
+extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
+
extern int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags);
extern int usb_hcd_unlink_urb (struct urb *urb, int status);
-extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb);
-extern void usb_hcd_endpoint_disable (struct usb_device *udev,
+extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern void usb_hcd_flush_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_disable_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
extern int usb_hcd_get_frame_number (struct usb_device *udev);
@@ -402,7 +418,7 @@ static inline void usbfs_cleanup(void) { }
struct usb_mon_operations {
void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
- void (*urb_complete)(struct usb_bus *bus, struct urb *urb);
+ void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
};
@@ -421,10 +437,11 @@ static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
(*mon_ops->urb_submit_error)(bus, urb, error);
}
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb)
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status)
{
if (bus->monitored)
- (*mon_ops->urb_complete)(bus, urb);
+ (*mon_ops->urb_complete)(bus, urb, status);
}
int usb_mon_register(struct usb_mon_operations *ops);
@@ -435,7 +452,8 @@ void usb_mon_deregister(void);
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
int error) {}
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status) {}
#endif /* CONFIG_USB_MON */
@@ -454,5 +472,9 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
: (in_interrupt () ? "in_interrupt" : "can sleep"))
-#endif /* __KERNEL__ */
+/* This rwsem is for use only by the hub driver and ehci-hcd.
+ * Nobody else should touch it.
+ */
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
+#endif /* __KERNEL__ */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f7b337feb3ea..d20cb545a6e4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -125,6 +125,12 @@ MODULE_PARM_DESC(use_both_schemes,
"try the other device initialization scheme if the "
"first one fails");
+/* Mutual exclusion for EHCI CF initialization. This interferes with
+ * port reset on some companion controllers.
+ */
+DECLARE_RWSEM(ehci_cf_port_reset_rwsem);
+EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
+
static inline char *portspeed(int portstatus)
{
@@ -347,11 +353,11 @@ void usb_kick_khubd(struct usb_device *hdev)
static void hub_irq(struct urb *urb)
{
struct usb_hub *hub = urb->context;
- int status;
+ int status = urb->status;
int i;
unsigned long bits;
- switch (urb->status) {
+ switch (status) {
case -ENOENT: /* synchronous unlink */
case -ECONNRESET: /* async unlink */
case -ESHUTDOWN: /* hardware going away */
@@ -359,10 +365,10 @@ static void hub_irq(struct urb *urb)
default: /* presumably an error */
/* Cause a hub reset after 10 consecutive errors */
- dev_dbg (hub->intfdev, "transfer --> %d\n", urb->status);
+ dev_dbg (hub->intfdev, "transfer --> %d\n", status);
if ((++hub->nerrors < 10) || hub->error)
goto resubmit;
- hub->error = urb->status;
+ hub->error = status;
/* FALL THROUGH */
/* let khubd handle things */
@@ -1220,54 +1226,14 @@ static inline void show_string(struct usb_device *udev, char *id, char *string)
#endif
/**
- * usb_new_device - perform initial device setup (usbcore-internal)
+ * usb_configure_device_otg - FIXME (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
- * This is called with devices which have been enumerated, but not yet
- * configured. The device descriptor is available, but not descriptors
- * for any device configuration. The caller must have locked either
- * the parent hub (if udev is a normal device) or else the
- * usb_bus_list_lock (if udev is a root hub). The parent's pointer to
- * udev has already been installed, but udev is not yet visible through
- * sysfs or other filesystem code.
- *
- * It will return if the device is configured properly or not. Zero if
- * the interface was registered with the driver core; else a negative
- * errno value.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- *
- * Only the hub driver or root-hub registrar should ever call this.
+ * Do configuration for On-The-Go devices
*/
-int usb_new_device(struct usb_device *udev)
+static int usb_configure_device_otg(struct usb_device *udev)
{
- int err;
-
- /* Determine quirks */
- usb_detect_quirks(udev);
-
- err = usb_get_configuration(udev);
- if (err < 0) {
- dev_err(&udev->dev, "can't read configurations, error %d\n",
- err);
- goto fail;
- }
-
- /* read the standard strings and cache them if present */
- udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
- udev->manufacturer = usb_cache_string(udev,
- udev->descriptor.iManufacturer);
- udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
-
- /* Tell the world! */
- dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
- "SerialNumber=%d\n",
- udev->descriptor.iManufacturer,
- udev->descriptor.iProduct,
- udev->descriptor.iSerialNumber);
- show_string(udev, "Product", udev->product);
- show_string(udev, "Manufacturer", udev->manufacturer);
- show_string(udev, "SerialNumber", udev->serial);
+ int err = 0;
#ifdef CONFIG_USB_OTG
/*
@@ -1329,8 +1295,82 @@ int usb_new_device(struct usb_device *udev)
err = -ENOTSUPP;
goto fail;
}
+fail:
#endif
+ return err;
+}
+
+
+/**
+ * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is only called by usb_new_device() and usb_authorize_device()
+ * and FIXME -- all comments that apply to them apply here wrt to
+ * environment.
+ *
+ * If the device is WUSB and not authorized, we don't attempt to read
+ * the string descriptors, as they will be errored out by the device
+ * until it has been authorized.
+ */
+static int usb_configure_device(struct usb_device *udev)
+{
+ int err;
+ if (udev->config == NULL) {
+ err = usb_get_configuration(udev);
+ if (err < 0) {
+ dev_err(&udev->dev, "can't read configurations, error %d\n",
+ err);
+ goto fail;
+ }
+ }
+ if (udev->wusb == 1 && udev->authorized == 0) {
+ udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ }
+ else {
+ /* read the standard strings and cache them if present */
+ udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+ udev->manufacturer = usb_cache_string(udev,
+ udev->descriptor.iManufacturer);
+ udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+ }
+ err = usb_configure_device_otg(udev);
+fail:
+ return err;
+}
+
+
+/**
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is called with devices which have been enumerated, but not yet
+ * configured. The device descriptor is available, but not descriptors
+ * for any device configuration. The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
+ * usb_bus_list_lock (if udev is a root hub). The parent's pointer to
+ * udev has already been installed, but udev is not yet visible through
+ * sysfs or other filesystem code.
+ *
+ * It will return if the device is configured properly or not. Zero if
+ * the interface was registered with the driver core; else a negative
+ * errno value.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Only the hub driver or root-hub registrar should ever call this.
+ */
+int usb_new_device(struct usb_device *udev)
+{
+ int err;
+
+ usb_detect_quirks(udev); /* Determine quirks */
+ err = usb_configure_device(udev); /* detect & probe dev/intfs */
+ if (err < 0)
+ goto fail;
/* export the usbdev device-node for libusb */
udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
@@ -1346,19 +1386,106 @@ int usb_new_device(struct usb_device *udev)
err = device_add(&udev->dev);
if (err) {
dev_err(&udev->dev, "can't device_add, error %d\n", err);
- if (udev->parent)
- usb_autosuspend_device(udev->parent);
goto fail;
}
-exit:
+ /* Tell the world! */
+ dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
+ "SerialNumber=%d\n",
+ udev->descriptor.iManufacturer,
+ udev->descriptor.iProduct,
+ udev->descriptor.iSerialNumber);
+ show_string(udev, "Product", udev->product);
+ show_string(udev, "Manufacturer", udev->manufacturer);
+ show_string(udev, "SerialNumber", udev->serial);
return err;
fail:
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
- goto exit;
+ return err;
}
+
+/**
+ * Similar to usb_disconnect()
+ *
+ * We share a lock (that we have) with device_del(), so we need to
+ * defer its call.
+ */
+int usb_deauthorize_device(struct usb_device *usb_dev)
+{
+ unsigned cnt;
+ usb_lock_device(usb_dev);
+ if (usb_dev->authorized == 0)
+ goto out_unauthorized;
+ usb_dev->authorized = 0;
+ usb_set_configuration(usb_dev, -1);
+ usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ kfree(usb_dev->config);
+ usb_dev->config = NULL;
+ for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++)
+ kfree(usb_dev->rawdescriptors[cnt]);
+ usb_dev->descriptor.bNumConfigurations = 0;
+ kfree(usb_dev->rawdescriptors);
+out_unauthorized:
+ usb_unlock_device(usb_dev);
+ return 0;
+}
+
+
+int usb_authorize_device(struct usb_device *usb_dev)
+{
+ int result = 0, c;
+ usb_lock_device(usb_dev);
+ if (usb_dev->authorized == 1)
+ goto out_authorized;
+ kfree(usb_dev->product);
+ usb_dev->product = NULL;
+ kfree(usb_dev->manufacturer);
+ usb_dev->manufacturer = NULL;
+ kfree(usb_dev->serial);
+ usb_dev->serial = NULL;
+ result = usb_autoresume_device(usb_dev);
+ if (result < 0) {
+ dev_err(&usb_dev->dev,
+ "can't autoresume for authorization: %d\n", result);
+ goto error_autoresume;
+ }
+ result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor));
+ if (result < 0) {
+ dev_err(&usb_dev->dev, "can't re-read device descriptor for "
+ "authorization: %d\n", result);
+ goto error_device_descriptor;
+ }
+ usb_dev->authorized = 1;
+ result = usb_configure_device(usb_dev);
+ if (result < 0)
+ goto error_configure;
+ /* Choose and set the configuration. This registers the interfaces
+ * with the driver core and lets interface drivers bind to them.
+ */
+ c = usb_choose_configuration(usb_dev);
+ if (c >= 0) {
+ result = usb_set_configuration(usb_dev, c);
+ if (result) {
+ dev_err(&usb_dev->dev,
+ "can't set config #%d, error %d\n", c, result);
+ /* This need not be fatal. The user can try to
+ * set other configurations. */
+ }
+ }
+ dev_info(&usb_dev->dev, "authorized to connect\n");
+error_configure:
+error_device_descriptor:
+error_autoresume:
+out_authorized:
+ usb_unlock_device(usb_dev); // complements locktree
+ return result;
+}
+
+
static int hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change)
{
@@ -1460,6 +1587,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
{
int i, status;
+ /* Block EHCI CF initialization during the port reset.
+ * Some companion controllers don't like it when they mix.
+ */
+ down_read(&ehci_cf_port_reset_rwsem);
+
/* Reset the port */
for (i = 0; i < PORT_RESET_TRIES; i++) {
status = set_port_feature(hub->hdev,
@@ -1481,6 +1613,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
case 0:
/* TRSTRCY = 10 ms; plus some extra */
msleep(10 + 40);
+ udev->devnum = 0; /* Device now at address 0 */
/* FALL THROUGH */
case -ENOTCONN:
case -ENODEV:
@@ -1490,7 +1623,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
usb_set_device_state(udev, status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
- return status;
+ goto done;
}
dev_dbg (hub->intfdev,
@@ -1503,6 +1636,8 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
"Cannot enable port %i. Maybe the USB cable is bad?\n",
port1);
+ done:
+ up_read(&ehci_cf_port_reset_rwsem);
return status;
}
@@ -1833,14 +1968,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
struct usb_device *udev;
udev = hdev->children [port1-1];
- if (udev && msg.event == PM_EVENT_SUSPEND &&
-#ifdef CONFIG_USB_SUSPEND
- udev->state != USB_STATE_SUSPENDED
-#else
- udev->dev.power.power_state.event
- == PM_EVENT_ON
-#endif
- ) {
+ if (udev && udev->can_submit) {
if (!hdev->auto_pm)
dev_dbg(&intf->dev, "port %d nyet suspended\n",
port1);
@@ -1999,26 +2127,27 @@ static void ep0_reinit(struct usb_device *udev)
{
usb_disable_endpoint(udev, 0 + USB_DIR_IN);
usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
- udev->ep_in[0] = udev->ep_out[0] = &udev->ep0;
+ usb_enable_endpoint(udev, &udev->ep0);
}
#define usb_sndaddr0pipe() (PIPE_CONTROL << 30)
#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN)
-static int hub_set_address(struct usb_device *udev)
+static int hub_set_address(struct usb_device *udev, int devnum)
{
int retval;
- if (udev->devnum == 0)
+ if (devnum <= 1)
return -EINVAL;
if (udev->state == USB_STATE_ADDRESS)
return 0;
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
- USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
+ USB_REQ_SET_ADDRESS, 0, devnum, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval == 0) {
+ udev->devnum = devnum; /* Device now using proper address */
usb_set_device_state(udev, USB_STATE_ADDRESS);
ep0_reinit(udev);
}
@@ -2045,6 +2174,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
char *speed, *type;
+ int devnum = udev->devnum;
/* root hub ports have a slightly longer reset period
* (from USB 2.0 spec, section 7.1.7.5)
@@ -2074,7 +2204,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
goto fail;
}
oldspeed = udev->speed;
-
+
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
* For Wireless USB devices, ep0 max packet is always 512 (tho
@@ -2115,7 +2245,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
dev_info (&udev->dev,
"%s %s speed %sUSB device using %s and address %d\n",
(udev->config) ? "reset" : "new", speed, type,
- udev->bus->controller->driver->name, udev->devnum);
+ udev->bus->controller->driver->name, devnum);
/* Set up TT records, if needed */
if (hdev->tt) {
@@ -2202,7 +2332,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
}
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
- retval = hub_set_address(udev);
+ retval = hub_set_address(udev, devnum);
if (retval >= 0)
break;
msleep(200);
@@ -2210,7 +2340,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (retval < 0) {
dev_err(&udev->dev,
"device not accepting address %d, error %d\n",
- udev->devnum, retval);
+ devnum, retval);
goto fail;
}
@@ -2263,8 +2393,10 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
retval = 0;
fail:
- if (retval)
+ if (retval) {
hub_port_disable(hub, port1, 0);
+ udev->devnum = devnum; /* for disconnect processing */
+ }
mutex_unlock(&usb_address0_mutex);
return retval;
}
@@ -2699,9 +2831,9 @@ static void hub_events(void)
clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
if (hubstatus & HUB_STATUS_LOCAL_POWER)
/* FIXME: Is this always true? */
- hub->limited_power = 0;
- else
hub->limited_power = 1;
+ else
+ hub->limited_power = 0;
}
if (hubchange & HUB_CHANGE_OVERCURRENT) {
dev_dbg (hub_dev, "overcurrent change\n");
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index d8f7b089a8f0..98fcddba6908 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -59,8 +59,8 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
dev_dbg(&urb->dev->dev,
"%s timed out on ep%d%s len=%d/%d\n",
current->comm,
- usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out",
+ usb_endpoint_num(&urb->ep->desc),
+ usb_urb_dir_in(urb) ? "in" : "out",
urb->actual_length,
urb->transfer_buffer_length);
} else
@@ -250,7 +250,8 @@ static void sg_clean (struct usb_sg_request *io)
io->urbs = NULL;
}
if (io->dev->dev.dma_mask != NULL)
- usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents);
+ usb_buffer_unmap_sg (io->dev, usb_pipein(io->pipe),
+ io->sg, io->nents);
io->dev = NULL;
}
@@ -278,8 +279,8 @@ static void sg_complete (struct urb *urb)
dev_err (io->dev->bus->controller,
"dev %s ep%d%s scatterlist error %d/%d\n",
io->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out",
+ usb_endpoint_num(&urb->ep->desc),
+ usb_urb_dir_in(urb) ? "in" : "out",
status, io->status);
// BUG ();
}
@@ -379,7 +380,8 @@ int usb_sg_init (
*/
dma = (dev->dev.dma_mask != NULL);
if (dma)
- io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
+ io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
+ sg, nents);
else
io->entries = nents;
@@ -1013,8 +1015,11 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
ep = dev->ep_in[epnum];
dev->ep_in[epnum] = NULL;
}
- if (ep && dev->bus)
- usb_hcd_endpoint_disable(dev, ep);
+ if (ep) {
+ ep->enabled = 0;
+ usb_hcd_flush_endpoint(dev, ep);
+ usb_hcd_disable_endpoint(dev, ep);
+ }
}
/**
@@ -1096,23 +1101,21 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
* Resets the endpoint toggle, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
-static void
-usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
+void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
{
- unsigned int epaddr = ep->desc.bEndpointAddress;
- unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
- int is_control;
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ int is_control = usb_endpoint_xfer_control(&ep->desc);
- is_control = ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_CONTROL);
- if (usb_endpoint_out(epaddr) || is_control) {
+ if (is_out || is_control) {
usb_settoggle(dev, epnum, 1, 0);
dev->ep_out[epnum] = ep;
}
- if (!usb_endpoint_out(epaddr) || is_control) {
+ if (!is_out || is_control) {
usb_settoggle(dev, epnum, 0, 0);
dev->ep_in[epnum] = ep;
}
+ ep->enabled = 1;
}
/*
@@ -1171,6 +1174,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
struct usb_host_interface *alt;
int ret;
int manual = 0;
+ int changed;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
@@ -1210,7 +1214,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
*/
/* prevent submissions using previous endpoint settings */
- if (device_is_registered(&iface->dev))
+ changed = (iface->cur_altsetting != alt);
+ if (changed && device_is_registered(&iface->dev))
usb_remove_sysfs_intf_files(iface);
usb_disable_interface(dev, iface);
@@ -1247,7 +1252,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
* (Likewise, EP0 never "halts" on well designed devices.)
*/
usb_enable_interface(dev, iface);
- if (device_is_registered(&iface->dev))
+ if (changed && device_is_registered(&iface->dev))
usb_create_sysfs_intf_files(iface);
return 0;
@@ -1328,7 +1333,7 @@ int usb_reset_configuration(struct usb_device *dev)
return 0;
}
-void usb_release_interface(struct device *dev)
+static void usb_release_interface(struct device *dev)
{
struct usb_interface *intf = to_usb_interface(dev);
struct usb_interface_cache *intfc =
@@ -1481,6 +1486,9 @@ static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
* channels are available independently; and choosing between open
* standard device protocols (like CDC) or proprietary ones.
*
+ * Note that a non-authorized device (dev->authorized == 0) will only
+ * be put in unconfigured mode.
+ *
* Note that USB has an additional level of device configurability,
* associated with interfaces. That configurability is accessed using
* usb_set_interface().
@@ -1502,7 +1510,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
struct usb_interface **new_interfaces = NULL;
int n, nintf;
- if (configuration == -1)
+ if (dev->authorized == 0 || configuration == -1)
configuration = 0;
else {
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index ebf3dc20110a..d42c561c75f1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -32,52 +32,6 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
/* HP 5300/5370C scanner */
{ USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
- /* Hewlett-Packard PhotoSmart 720 / PhotoSmart 935 (storage) */
- { USB_DEVICE(0x03f0, 0x4002), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
- /* SGS Thomson Microelectronics 4in1 card reader */
- { USB_DEVICE(0x0483, 0x0321), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
- /* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */
- { USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Benq S2W 3300U */
- { USB_DEVICE(0x04a5, 0x20b0), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Canon, Inc. CanoScan N1240U/LiDE30 */
- { USB_DEVICE(0x04a9, 0x220e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Canon, Inc. CanoScan N650U/N656U */
- { USB_DEVICE(0x04a9, 0x2206), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Canon, Inc. CanoScan 1220U */
- { USB_DEVICE(0x04a9, 0x2207), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Canon, Inc. CanoScan N670U/N676U/LiDE 20 */
- { USB_DEVICE(0x04a9, 0x220d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* old Cannon scanner */
- { USB_DEVICE(0x04a9, 0x2220), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Seiko Epson Corp. Perfection 1200 */
- { USB_DEVICE(0x04b8, 0x0104), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Seiko Epson Corp. Perfection 660 */
- { USB_DEVICE(0x04b8, 0x0114), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Epson Perfection 1260 Photo */
- { USB_DEVICE(0x04b8, 0x011d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Seiko Epson Corp - Perfection 1670 */
- { USB_DEVICE(0x04b8, 0x011f), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* EPSON Perfection 2480 */
- { USB_DEVICE(0x04b8, 0x0121), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Seiko Epson Corp.*/
- { USB_DEVICE(0x04b8, 0x0122), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Samsung ML-2010 printer */
- { USB_DEVICE(0x04e8, 0x326c), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Samsung ML-2510 Series printer */
- { USB_DEVICE(0x04e8, 0x327e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Elsa MicroLink 56k (V.250) */
- { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Ultima Electronics Corp.*/
- { USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
- /* Genesys USB-to-IDE */
- { USB_DEVICE(0x0503, 0x0702), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
- /* USB Graphical LCD - EEH Datalink GmbH */
- { USB_DEVICE(0x060c, 0x04eb), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -85,44 +39,15 @@ static const struct usb_device_id usb_quirk_list[] = {
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Agfa Snapscan1212u */
- { USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Seagate RSS LLC */
- { USB_DEVICE(0x0bc2, 0x3000), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- /* Umax [hex] Astra 3400U */
- { USB_DEVICE(0x1606, 0x0060), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Alcor multi-card reader */
- { USB_DEVICE(0x058f, 0x6366), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
- /* Canon EOS 5D in PC Connection mode */
- { USB_DEVICE(0x04a9, 0x3101), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
- /* RIM Blackberry */
- { USB_DEVICE(0x0fca, 0x0001), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- { USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
- { USB_DEVICE(0x0fca, 0x0006), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
- /* Apple iPhone */
- { USB_DEVICE(0x05ac, 0x1290), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
-static void usb_autosuspend_quirk(struct usb_device *udev)
-{
-#ifdef CONFIG_USB_SUSPEND
- /* disable autosuspend, but allow the user to re-enable it via sysfs */
- udev->autosuspend_disabled = 1;
-#endif
-}
-
static const struct usb_device_id *find_id(struct usb_device *udev)
{
const struct usb_device_id *id = usb_quirk_list;
@@ -149,13 +74,9 @@ void usb_detect_quirks(struct usb_device *udev)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
- /* do any special quirk handling here if needed */
- if (udev->quirks & USB_QUIRK_NO_AUTOSUSPEND)
- usb_autosuspend_quirk(udev);
-
/* By default, disable autosuspend for all non-hubs */
#ifdef CONFIG_USB_SUSPEND
if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
- udev->autosuspend_delay = -1;
+ udev->autosuspend_disabled = 1;
#endif
}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 2ab222be8fd1..b04afd06e502 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -169,6 +169,16 @@ show_quirks(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR(quirks, S_IRUGO, show_quirks, NULL);
+static ssize_t
+show_urbnum(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_device *udev;
+
+ udev = to_usb_device(dev);
+ return sprintf(buf, "%d\n", atomic_read(&udev->urbnum));
+}
+static DEVICE_ATTR(urbnum, S_IRUGO, show_urbnum, NULL);
+
#if defined(CONFIG_USB_PERSIST) || defined(CONFIG_USB_SUSPEND)
static const char power_group[] = "power";
@@ -413,6 +423,44 @@ usb_descriptor_attr(bDeviceProtocol, "%02x\n")
usb_descriptor_attr(bNumConfigurations, "%d\n")
usb_descriptor_attr(bMaxPacketSize0, "%d\n")
+
+
+/* show if the device is authorized (1) or not (0) */
+static ssize_t usb_dev_authorized_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *usb_dev = to_usb_device(dev);
+ return snprintf(buf, PAGE_SIZE, "%u\n", usb_dev->authorized);
+}
+
+
+/*
+ * Authorize a device to be used in the system
+ *
+ * Writing a 0 deauthorizes the device, writing a 1 authorizes it.
+ */
+static ssize_t usb_dev_authorized_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ ssize_t result;
+ struct usb_device *usb_dev = to_usb_device(dev);
+ unsigned val;
+ result = sscanf(buf, "%u\n", &val);
+ if (result != 1)
+ result = -EINVAL;
+ else if (val == 0)
+ result = usb_deauthorize_device(usb_dev);
+ else
+ result = usb_authorize_device(usb_dev);
+ return result < 0? result : size;
+}
+
+static DEVICE_ATTR(authorized, 0644,
+ usb_dev_authorized_show, usb_dev_authorized_store);
+
+
static struct attribute *dev_attrs[] = {
/* current configuration's attributes */
&dev_attr_configuration.attr,
@@ -420,6 +468,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_bConfigurationValue.attr,
&dev_attr_bmAttributes.attr,
&dev_attr_bMaxPower.attr,
+ &dev_attr_urbnum.attr,
/* device attributes */
&dev_attr_idVendor.attr,
&dev_attr_idProduct.attr,
@@ -435,6 +484,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_version.attr,
&dev_attr_maxchild.attr,
&dev_attr_quirks.attr,
+ &dev_attr_authorized.attr,
NULL,
};
static struct attribute_group dev_attr_grp = {
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index be630228461c..c20c03aaf012 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -3,6 +3,7 @@
#include <linux/bitops.h>
#include <linux/slab.h>
#include <linux/init.h>
+#include <linux/log2.h>
#include <linux/usb.h>
#include <linux/wait.h>
#include "hcd.h"
@@ -38,7 +39,6 @@ void usb_init_urb(struct urb *urb)
if (urb) {
memset(urb, 0, sizeof(*urb));
kref_init(&urb->kref);
- spin_lock_init(&urb->lock);
INIT_LIST_HEAD(&urb->anchor_list);
}
}
@@ -277,44 +277,58 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
*/
int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
{
- int pipe, temp, max;
- struct usb_device *dev;
- int is_out;
+ int xfertype, max;
+ struct usb_device *dev;
+ struct usb_host_endpoint *ep;
+ int is_out;
if (!urb || urb->hcpriv || !urb->complete)
return -EINVAL;
- if (!(dev = urb->dev) ||
- (dev->state < USB_STATE_DEFAULT) ||
- (!dev->bus) || (dev->devnum <= 0))
+ if (!(dev = urb->dev) || dev->state < USB_STATE_DEFAULT)
return -ENODEV;
- if (dev->bus->controller->power.power_state.event != PM_EVENT_ON
- || dev->state == USB_STATE_SUSPENDED)
- return -EHOSTUNREACH;
+ /* For now, get the endpoint from the pipe. Eventually drivers
+ * will be required to set urb->ep directly and we will eliminate
+ * urb->pipe.
+ */
+ ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
+ [usb_pipeendpoint(urb->pipe)];
+ if (!ep)
+ return -ENOENT;
+
+ urb->ep = ep;
urb->status = -EINPROGRESS;
urb->actual_length = 0;
/* Lots of sanity checks, so HCDs can rely on clean data
* and don't need to duplicate tests
*/
- pipe = urb->pipe;
- temp = usb_pipetype(pipe);
- is_out = usb_pipeout(pipe);
+ xfertype = usb_endpoint_type(&ep->desc);
+ if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
+ struct usb_ctrlrequest *setup =
+ (struct usb_ctrlrequest *) urb->setup_packet;
+
+ if (!setup)
+ return -ENOEXEC;
+ is_out = !(setup->bRequestType & USB_DIR_IN) ||
+ !setup->wLength;
+ } else {
+ is_out = usb_endpoint_dir_out(&ep->desc);
+ }
- if (!usb_pipecontrol(pipe) && dev->state < USB_STATE_CONFIGURED)
- return -ENODEV;
+ /* Cache the direction for later use */
+ urb->transfer_flags = (urb->transfer_flags & ~URB_DIR_MASK) |
+ (is_out ? URB_DIR_OUT : URB_DIR_IN);
- /* FIXME there should be a sharable lock protecting us against
- * config/altsetting changes and disconnects, kicking in here.
- * (here == before maxpacket, and eventually endpoint type,
- * checks get made.)
- */
+ if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
+ dev->state < USB_STATE_CONFIGURED)
+ return -ENODEV;
- max = usb_maxpacket(dev, pipe, is_out);
+ max = le16_to_cpu(ep->desc.wMaxPacketSize);
if (max <= 0) {
dev_dbg(&dev->dev,
"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
- usb_pipeendpoint(pipe), is_out ? "out" : "in",
+ usb_endpoint_num(&ep->desc), is_out ? "out" : "in",
__FUNCTION__, max);
return -EMSGSIZE;
}
@@ -323,7 +337,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
* but drivers only control those sizes for ISO.
* while we're checking, initialize return status.
*/
- if (temp == PIPE_ISOCHRONOUS) {
+ if (xfertype == USB_ENDPOINT_XFER_ISOC) {
int n, len;
/* "high bandwidth" mode, 1-3 packets/uframe? */
@@ -358,20 +372,20 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
/* enforce simple/standard policy */
allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
- URB_NO_INTERRUPT);
- switch (temp) {
- case PIPE_BULK:
+ URB_NO_INTERRUPT | URB_DIR_MASK);
+ switch (xfertype) {
+ case USB_ENDPOINT_XFER_BULK:
if (is_out)
allowed |= URB_ZERO_PACKET;
/* FALLTHROUGH */
- case PIPE_CONTROL:
+ case USB_ENDPOINT_XFER_CONTROL:
allowed |= URB_NO_FSBR; /* only affects UHCI */
/* FALLTHROUGH */
default: /* all non-iso endpoints */
if (!is_out)
allowed |= URB_SHORT_NOT_OK;
break;
- case PIPE_ISOCHRONOUS:
+ case USB_ENDPOINT_XFER_ISOC:
allowed |= URB_ISO_ASAP;
break;
}
@@ -393,9 +407,9 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
* supports different values... this uses EHCI/UHCI defaults (and
* EHCI can use smaller non-default values).
*/
- switch (temp) {
- case PIPE_ISOCHRONOUS:
- case PIPE_INTERRUPT:
+ switch (xfertype) {
+ case USB_ENDPOINT_XFER_ISOC:
+ case USB_ENDPOINT_XFER_INT:
/* too small? */
if (urb->interval <= 0)
return -EINVAL;
@@ -405,29 +419,27 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
// NOTE usb handles 2^15
if (urb->interval > (1024 * 8))
urb->interval = 1024 * 8;
- temp = 1024 * 8;
+ max = 1024 * 8;
break;
case USB_SPEED_FULL: /* units are frames/msec */
case USB_SPEED_LOW:
- if (temp == PIPE_INTERRUPT) {
+ if (xfertype == USB_ENDPOINT_XFER_INT) {
if (urb->interval > 255)
return -EINVAL;
// NOTE ohci only handles up to 32
- temp = 128;
+ max = 128;
} else {
if (urb->interval > 1024)
urb->interval = 1024;
// NOTE usb and ohci handle up to 2^15
- temp = 1024;
+ max = 1024;
}
break;
default:
return -EINVAL;
}
- /* power of two? */
- while (temp > urb->interval)
- temp >>= 1;
- urb->interval = temp;
+ /* Round down to a power of 2, no more than max */
+ urb->interval = min(max, 1 << ilog2(urb->interval));
}
return usb_hcd_submit_urb(urb, mem_flags);
@@ -496,8 +508,10 @@ int usb_unlink_urb(struct urb *urb)
{
if (!urb)
return -EINVAL;
- if (!(urb->dev && urb->dev->bus))
+ if (!urb->dev)
return -ENODEV;
+ if (!urb->ep)
+ return -EIDRM;
return usb_hcd_unlink_urb(urb, -ECONNRESET);
}
@@ -523,19 +537,21 @@ int usb_unlink_urb(struct urb *urb)
*/
void usb_kill_urb(struct urb *urb)
{
+ static DEFINE_MUTEX(reject_mutex);
+
might_sleep();
- if (!(urb && urb->dev && urb->dev->bus))
+ if (!(urb && urb->dev && urb->ep))
return;
- spin_lock_irq(&urb->lock);
+ mutex_lock(&reject_mutex);
++urb->reject;
- spin_unlock_irq(&urb->lock);
+ mutex_unlock(&reject_mutex);
usb_hcd_unlink_urb(urb, -ENOENT);
wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
- spin_lock_irq(&urb->lock);
+ mutex_lock(&reject_mutex);
--urb->reject;
- spin_unlock_irq(&urb->lock);
+ mutex_unlock(&reject_mutex);
}
/**
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0fee5c66fd64..c99938d5f78e 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -223,6 +223,15 @@ static void ksuspend_usb_cleanup(void)
#endif /* CONFIG_PM */
+
+/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
+static unsigned usb_bus_is_wusb(struct usb_bus *bus)
+{
+ struct usb_hcd *hcd = container_of(bus, struct usb_hcd, self);
+ return hcd->wireless;
+}
+
+
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
* @parent: hub to which device is connected; null to allocate a root hub
@@ -239,6 +248,8 @@ struct usb_device *
usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
+ struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
+ unsigned root_hub = 0;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
@@ -255,12 +266,14 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
dev->dev.dma_mask = bus->controller->dma_mask;
set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
+ atomic_set(&dev->urbnum, 0);
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
- dev->ep_in[0] = dev->ep_out[0] = &dev->ep0;
+ usb_enable_endpoint(dev, &dev->ep0);
+ dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
* by location for diagnostics, tools, driver model, etc. The
@@ -275,6 +288,7 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
dev->dev.parent = bus->controller;
sprintf(&dev->dev.bus_id[0], "usb%d", bus->busnum);
+ root_hub = 1;
} else {
/* match any labeling on the hubs; it's one-based */
if (parent->devpath[0] == '0')
@@ -301,6 +315,12 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
dev->autosuspend_delay = usb_autosuspend_delay * HZ;
#endif
+ if (root_hub) /* Root hub always ok [and always wired] */
+ dev->authorized = 1;
+ else {
+ dev->authorized = usb_hcd->authorized_default;
+ dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
+ }
return dev;
}
@@ -748,7 +768,7 @@ void usb_buffer_unmap(struct urb *urb)
/**
* usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
* @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
* @sg: the scatterlist to map
* @nents: the number of entries in the scatterlist
*
@@ -771,14 +791,13 @@ void usb_buffer_unmap(struct urb *urb)
*
* Reverse the effect of this call with usb_buffer_unmap_sg().
*/
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int nents)
{
struct usb_bus *bus;
struct device *controller;
if (!dev
- || usb_pipecontrol(pipe)
|| !(bus = dev->bus)
|| !(controller = bus->controller)
|| !controller->dma_mask)
@@ -786,7 +805,7 @@ int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
// FIXME generic api broken like pci, can't report errors
return dma_map_sg(controller, sg, nents,
- usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
/* XXX DISABLED, no users currently. If you wish to re-enable this
@@ -799,14 +818,14 @@ int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
/**
* usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s)
* @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
* @sg: the scatterlist to synchronize
* @n_hw_ents: the positive return value from usb_buffer_map_sg
*
* Use this when you are re-using a scatterlist's data buffers for
* another USB request.
*/
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
@@ -819,20 +838,20 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
return;
dma_sync_sg(controller, sg, n_hw_ents,
- usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
#endif
/**
* usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
* @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
* @sg: the scatterlist to unmap
* @n_hw_ents: the positive return value from usb_buffer_map_sg
*
* Reverses the effect of usb_buffer_map_sg().
*/
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
@@ -845,7 +864,7 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
return;
dma_unmap_sg(controller, sg, n_hw_ents,
- usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
/* format to disable USB on kernel command line is: nousb */
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index ad5fa0338f49..c52626c51f70 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -8,17 +8,22 @@ extern int usb_create_ep_files(struct device *parent, struct usb_host_endpoint *
struct usb_device *udev);
extern void usb_remove_ep_files(struct usb_host_endpoint *endpoint);
+extern void usb_enable_endpoint(struct usb_device *dev,
+ struct usb_host_endpoint *ep);
extern void usb_disable_endpoint (struct usb_device *dev, unsigned int epaddr);
extern void usb_disable_interface (struct usb_device *dev,
struct usb_interface *intf);
extern void usb_release_interface_cache(struct kref *ref);
extern void usb_disable_device (struct usb_device *dev, int skip_ep0);
+extern int usb_deauthorize_device (struct usb_device *);
+extern int usb_authorize_device (struct usb_device *);
extern void usb_detect_quirks(struct usb_device *udev);
extern int usb_get_device_descriptor(struct usb_device *dev,
unsigned int size);
extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
+extern int usb_choose_configuration(struct usb_device *udev);
extern void usb_kick_khubd(struct usb_device *dev);
extern int usb_match_device(struct usb_device *dev,
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 767aed5b4bea..f81d08d6538b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES
driver on a new board. Enable these files by choosing "Y"
here. If in doubt, or to conserve kernel memory, say "N".
+config USB_GADGET_DEBUG_FS
+ boolean "Debugging information files in debugfs"
+ depends on USB_GADGET && DEBUG_FS
+ help
+ Some of the drivers in the "gadget" framework can expose
+ debugging information in files under /sys/kernel/debug/.
+ The information in these files may help when you're
+ troubleshooting or bringing up a driver on a new board.
+ Enable these files by choosing "Y" here. If in doubt, or
+ to conserve kernel memory, say "N".
+
config USB_GADGET_SELECTED
boolean
@@ -103,6 +114,20 @@ config USB_AMD5536UDC
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_ATMEL_USBA
+ boolean "Atmel USBA"
+ select USB_GADGET_DUALSPEED
+ depends on AVR32
+ help
+ USBA is the integrated high-speed USB Device controller on
+ the AT32AP700x processors from Atmel.
+
+config USB_ATMEL_USBA
+ tristate
+ depends on USB_GADGET_ATMEL_USBA
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
depends on MPC834x || PPC_MPC831x
@@ -228,7 +253,6 @@ config USB_LH7A40X
default USB_GADGET
select USB_GADGET_SELECTED
-
config USB_GADGET_OMAP
boolean "OMAP USB Device Controller"
depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 1bc0f03550ce..904e57bf6112 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
+obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
obj-$(CONFIG_USB_M66592) += m66592-udc.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 714156ca8fe4..1c8040602525 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -69,7 +69,7 @@
/* gadget stack */
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
/* udc specific */
#include "amd5536udc.h"
@@ -3244,7 +3244,6 @@ static int udc_pci_probe(
retval = -ENOMEM;
goto finished;
}
- memset(dev, 0, sizeof(struct udc));
/* pci setup */
if (pci_enable_device(pdev) < 0) {
@@ -3286,14 +3285,12 @@ static int udc_pci_probe(
pci_set_drvdata(pdev, dev);
- /* chip revision */
- dev->chiprev = 0;
+ /* chip revision for Hs AMD5536 */
+ dev->chiprev = pdev->revision;
pci_set_master(pdev);
pci_set_mwi(pdev);
- /* chip rev for Hs AMD5536 */
- pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) &dev->chiprev);
/* init dma pools */
if (use_dma) {
retval = init_dma_pools(dev);
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 63d7d6568699..a6adf7e0f6f8 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -38,7 +38,7 @@
#include <linux/proc_fs.h>
#include <linux/clk.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/hardware.h>
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
new file mode 100644
index 000000000000..4fb5ff469574
--- /dev/null
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -0,0 +1,2077 @@
+/*
+ * Driver for the Atmel USBA high speed USB device controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/delay.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/board.h>
+
+#include "atmel_usba_udc.h"
+
+
+static struct usba_udc the_udc;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+
+static int queue_dbg_open(struct inode *inode, struct file *file)
+{
+ struct usba_ep *ep = inode->i_private;
+ struct usba_request *req, *req_copy;
+ struct list_head *queue_data;
+
+ queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
+ if (!queue_data)
+ return -ENOMEM;
+ INIT_LIST_HEAD(queue_data);
+
+ spin_lock_irq(&ep->udc->lock);
+ list_for_each_entry(req, &ep->queue, queue) {
+ req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
+ if (!req_copy)
+ goto fail;
+ memcpy(req_copy, req, sizeof(*req_copy));
+ list_add_tail(&req_copy->queue, queue_data);
+ }
+ spin_unlock_irq(&ep->udc->lock);
+
+ file->private_data = queue_data;
+ return 0;
+
+fail:
+ spin_unlock_irq(&ep->udc->lock);
+ list_for_each_entry_safe(req, req_copy, queue_data, queue) {
+ list_del(&req->queue);
+ kfree(req);
+ }
+ kfree(queue_data);
+ return -ENOMEM;
+}
+
+/*
+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
+ *
+ * b: buffer address
+ * l: buffer length
+ * I/i: interrupt/no interrupt
+ * Z/z: zero/no zero
+ * S/s: short ok/short not ok
+ * s: status
+ * n: nr_packets
+ * F/f: submitted/not submitted to FIFO
+ * D/d: using/not using DMA
+ * L/l: last transaction/not last transaction
+ */
+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct list_head *queue = file->private_data;
+ struct usba_request *req, *tmp_req;
+ size_t len, remaining, actual = 0;
+ char tmpbuf[38];
+
+ if (!access_ok(VERIFY_WRITE, buf, nbytes))
+ return -EFAULT;
+
+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ list_for_each_entry_safe(req, tmp_req, queue, queue) {
+ len = snprintf(tmpbuf, sizeof(tmpbuf),
+ "%8p %08x %c%c%c %5d %c%c%c\n",
+ req->req.buf, req->req.length,
+ req->req.no_interrupt ? 'i' : 'I',
+ req->req.zero ? 'Z' : 'z',
+ req->req.short_not_ok ? 's' : 'S',
+ req->req.status,
+ req->submitted ? 'F' : 'f',
+ req->using_dma ? 'D' : 'd',
+ req->last_transaction ? 'L' : 'l');
+ len = min(len, sizeof(tmpbuf));
+ if (len > nbytes)
+ break;
+
+ list_del(&req->queue);
+ kfree(req);
+
+ remaining = __copy_to_user(buf, tmpbuf, len);
+ actual += len - remaining;
+ if (remaining)
+ break;
+
+ nbytes -= len;
+ buf += len;
+ }
+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+
+ return actual;
+}
+
+static int queue_dbg_release(struct inode *inode, struct file *file)
+{
+ struct list_head *queue_data = file->private_data;
+ struct usba_request *req, *tmp_req;
+
+ list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
+ list_del(&req->queue);
+ kfree(req);
+ }
+ kfree(queue_data);
+ return 0;
+}
+
+static int regs_dbg_open(struct inode *inode, struct file *file)
+{
+ struct usba_udc *udc;
+ unsigned int i;
+ u32 *data;
+ int ret = -ENOMEM;
+
+ mutex_lock(&inode->i_mutex);
+ udc = inode->i_private;
+ data = kmalloc(inode->i_size, GFP_KERNEL);
+ if (!data)
+ goto out;
+
+ spin_lock_irq(&udc->lock);
+ for (i = 0; i < inode->i_size / 4; i++)
+ data[i] = __raw_readl(udc->regs + i * 4);
+ spin_unlock_irq(&udc->lock);
+
+ file->private_data = data;
+ ret = 0;
+
+out:
+ mutex_unlock(&inode->i_mutex);
+
+ return ret;
+}
+
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ int ret;
+
+ mutex_lock(&inode->i_mutex);
+ ret = simple_read_from_buffer(buf, nbytes, ppos,
+ file->private_data,
+ file->f_dentry->d_inode->i_size);
+ mutex_unlock(&inode->i_mutex);
+
+ return ret;
+}
+
+static int regs_dbg_release(struct inode *inode, struct file *file)
+{
+ kfree(file->private_data);
+ return 0;
+}
+
+const struct file_operations queue_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = queue_dbg_open,
+ .llseek = no_llseek,
+ .read = queue_dbg_read,
+ .release = queue_dbg_release,
+};
+
+const struct file_operations regs_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = regs_dbg_open,
+ .llseek = generic_file_llseek,
+ .read = regs_dbg_read,
+ .release = regs_dbg_release,
+};
+
+static void usba_ep_init_debugfs(struct usba_udc *udc,
+ struct usba_ep *ep)
+{
+ struct dentry *ep_root;
+
+ ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
+ if (!ep_root)
+ goto err_root;
+ ep->debugfs_dir = ep_root;
+
+ ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
+ ep, &queue_dbg_fops);
+ if (!ep->debugfs_queue)
+ goto err_queue;
+
+ if (ep->can_dma) {
+ ep->debugfs_dma_status
+ = debugfs_create_u32("dma_status", 0400, ep_root,
+ &ep->last_dma_status);
+ if (!ep->debugfs_dma_status)
+ goto err_dma_status;
+ }
+ if (ep_is_control(ep)) {
+ ep->debugfs_state
+ = debugfs_create_u32("state", 0400, ep_root,
+ &ep->state);
+ if (!ep->debugfs_state)
+ goto err_state;
+ }
+
+ return;
+
+err_state:
+ if (ep->can_dma)
+ debugfs_remove(ep->debugfs_dma_status);
+err_dma_status:
+ debugfs_remove(ep->debugfs_queue);
+err_queue:
+ debugfs_remove(ep_root);
+err_root:
+ dev_err(&ep->udc->pdev->dev,
+ "failed to create debugfs directory for %s\n", ep->ep.name);
+}
+
+static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
+{
+ debugfs_remove(ep->debugfs_queue);
+ debugfs_remove(ep->debugfs_dma_status);
+ debugfs_remove(ep->debugfs_state);
+ debugfs_remove(ep->debugfs_dir);
+ ep->debugfs_dma_status = NULL;
+ ep->debugfs_dir = NULL;
+}
+
+static void usba_init_debugfs(struct usba_udc *udc)
+{
+ struct dentry *root, *regs;
+ struct resource *regs_resource;
+
+ root = debugfs_create_dir(udc->gadget.name, NULL);
+ if (IS_ERR(root) || !root)
+ goto err_root;
+ udc->debugfs_root = root;
+
+ regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
+ if (!regs)
+ goto err_regs;
+
+ regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
+ CTRL_IOMEM_ID);
+ regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
+ udc->debugfs_regs = regs;
+
+ usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
+
+ return;
+
+err_regs:
+ debugfs_remove(root);
+err_root:
+ udc->debugfs_root = NULL;
+ dev_err(&udc->pdev->dev, "debugfs is not available\n");
+}
+
+static void usba_cleanup_debugfs(struct usba_udc *udc)
+{
+ usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
+ debugfs_remove(udc->debugfs_regs);
+ debugfs_remove(udc->debugfs_root);
+ udc->debugfs_regs = NULL;
+ udc->debugfs_root = NULL;
+}
+#else
+static inline void usba_ep_init_debugfs(struct usba_udc *udc,
+ struct usba_ep *ep)
+{
+
+}
+
+static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
+{
+
+}
+
+static inline void usba_init_debugfs(struct usba_udc *udc)
+{
+
+}
+
+static inline void usba_cleanup_debugfs(struct usba_udc *udc)
+{
+
+}
+#endif
+
+static int vbus_is_present(struct usba_udc *udc)
+{
+ if (udc->vbus_pin != -1)
+ return gpio_get_value(udc->vbus_pin);
+
+ /* No Vbus detection: Assume always present */
+ return 1;
+}
+
+static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
+{
+ unsigned long tmp;
+
+ DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
+ for (; len > 0; len -= 4, buf += 4, fifo += 4) {
+ tmp = *(unsigned long *)buf;
+ if (len >= 4) {
+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
+ __raw_writel(tmp, fifo);
+ } else {
+ do {
+ DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
+ __raw_writeb(tmp >> 24, fifo);
+ fifo++;
+ tmp <<= 8;
+ } while (--len);
+ break;
+ }
+ }
+}
+
+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
+{
+ union {
+ unsigned long *w;
+ unsigned char *b;
+ } p;
+ unsigned long tmp;
+
+ DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
+ for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
+ if (len >= 4) {
+ tmp = __raw_readl(fifo);
+ *p.w = tmp;
+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
+ } else {
+ do {
+ tmp = __raw_readb(fifo);
+ *p.b = tmp;
+ DBG(DBG_FIFO, " -> %02lx\n", tmp);
+ fifo++, p.b++;
+ } while (--len);
+ }
+ }
+}
+
+static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
+{
+ unsigned int transaction_len;
+
+ transaction_len = req->req.length - req->req.actual;
+ req->last_transaction = 1;
+ if (transaction_len > ep->ep.maxpacket) {
+ transaction_len = ep->ep.maxpacket;
+ req->last_transaction = 0;
+ } else if (transaction_len == ep->ep.maxpacket && req->req.zero)
+ req->last_transaction = 0;
+
+ DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
+ ep->ep.name, req, transaction_len,
+ req->last_transaction ? ", done" : "");
+
+ copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+ req->req.actual += transaction_len;
+}
+
+static void submit_request(struct usba_ep *ep, struct usba_request *req)
+{
+ DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
+ ep->ep.name, req, req->req.length);
+
+ req->req.actual = 0;
+ req->submitted = 1;
+
+ if (req->using_dma) {
+ if (req->req.length == 0) {
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+ return;
+ }
+
+ if (req->req.zero)
+ usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
+ else
+ usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
+
+ usba_dma_writel(ep, ADDRESS, req->req.dma);
+ usba_dma_writel(ep, CONTROL, req->ctrl);
+ } else {
+ next_fifo_transaction(ep, req);
+ if (req->last_transaction) {
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+ } else {
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+ }
+ }
+}
+
+static void submit_next_request(struct usba_ep *ep)
+{
+ struct usba_request *req;
+
+ if (list_empty(&ep->queue)) {
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
+ return;
+ }
+
+ req = list_entry(ep->queue.next, struct usba_request, queue);
+ if (!req->submitted)
+ submit_request(ep, req);
+}
+
+static void send_status(struct usba_udc *udc, struct usba_ep *ep)
+{
+ ep->state = STATUS_STAGE_IN;
+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+}
+
+static void receive_data(struct usba_ep *ep)
+{
+ struct usba_udc *udc = ep->udc;
+ struct usba_request *req;
+ unsigned long status;
+ unsigned int bytecount, nr_busy;
+ int is_complete = 0;
+
+ status = usba_ep_readl(ep, STA);
+ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
+
+ DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
+
+ while (nr_busy > 0) {
+ if (list_empty(&ep->queue)) {
+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+ break;
+ }
+ req = list_entry(ep->queue.next,
+ struct usba_request, queue);
+
+ bytecount = USBA_BFEXT(BYTE_COUNT, status);
+
+ if (status & (1 << 31))
+ is_complete = 1;
+ if (req->req.actual + bytecount >= req->req.length) {
+ is_complete = 1;
+ bytecount = req->req.length - req->req.actual;
+ }
+
+ copy_from_fifo(req->req.buf + req->req.actual,
+ ep->fifo, bytecount);
+ req->req.actual += bytecount;
+
+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+
+ if (is_complete) {
+ DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
+ req->req.status = 0;
+ list_del_init(&req->queue);
+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+ spin_unlock(&udc->lock);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&udc->lock);
+ }
+
+ status = usba_ep_readl(ep, STA);
+ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
+
+ if (is_complete && ep_is_control(ep)) {
+ send_status(udc, ep);
+ break;
+ }
+ }
+}
+
+static void
+request_complete(struct usba_ep *ep, struct usba_request *req, int status)
+{
+ struct usba_udc *udc = ep->udc;
+
+ WARN_ON(!list_empty(&req->queue));
+
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+
+ if (req->mapped) {
+ dma_unmap_single(
+ &udc->pdev->dev, req->req.dma, req->req.length,
+ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ }
+
+ DBG(DBG_GADGET | DBG_REQ,
+ "%s: req %p complete: status %d, actual %u\n",
+ ep->ep.name, req, req->req.status, req->req.actual);
+
+ spin_unlock(&udc->lock);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&udc->lock);
+}
+
+static void
+request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
+{
+ struct usba_request *req, *tmp_req;
+
+ list_for_each_entry_safe(req, tmp_req, list, queue) {
+ list_del_init(&req->queue);
+ request_complete(ep, req, status);
+ }
+}
+
+static int
+usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+ struct usba_ep *ep = to_usba_ep(_ep);
+ struct usba_udc *udc = ep->udc;
+ unsigned long flags, ept_cfg, maxpacket;
+ unsigned int nr_trans;
+
+ DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
+
+ maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+
+ if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
+ || ep->index == 0
+ || desc->bDescriptorType != USB_DT_ENDPOINT
+ || maxpacket == 0
+ || maxpacket > ep->fifo_size) {
+ DBG(DBG_ERR, "ep_enable: Invalid argument");
+ return -EINVAL;
+ }
+
+ ep->is_isoc = 0;
+ ep->is_in = 0;
+
+ if (maxpacket <= 8)
+ ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
+ else
+ /* LSB is bit 1, not 0 */
+ ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
+
+ DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
+ ep->ep.name, ept_cfg, maxpacket);
+
+ if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ ep->is_in = 1;
+ ept_cfg |= USBA_EPT_DIR_IN;
+ }
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!ep->can_isoc) {
+ DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
+ ep->ep.name);
+ return -EINVAL;
+ }
+
+ /*
+ * Bits 11:12 specify number of _additional_
+ * transactions per microframe.
+ */
+ nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
+ if (nr_trans > 3)
+ return -EINVAL;
+
+ ep->is_isoc = 1;
+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
+
+ /*
+ * Do triple-buffering on high-bandwidth iso endpoints.
+ */
+ if (nr_trans > 1 && ep->nr_banks == 3)
+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
+ else
+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
+ ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
+ break;
+ }
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+
+ if (ep->desc) {
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
+ return -EBUSY;
+ }
+
+ ep->desc = desc;
+ ep->ep.maxpacket = maxpacket;
+
+ usba_ep_writel(ep, CFG, ept_cfg);
+ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+
+ if (ep->can_dma) {
+ u32 ctrl;
+
+ usba_writel(udc, INT_ENB,
+ (usba_readl(udc, INT_ENB)
+ | USBA_BF(EPT_INT, 1 << ep->index)
+ | USBA_BF(DMA_INT, 1 << ep->index)));
+ ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
+ usba_ep_writel(ep, CTL_ENB, ctrl);
+ } else {
+ usba_writel(udc, INT_ENB,
+ (usba_readl(udc, INT_ENB)
+ | USBA_BF(EPT_INT, 1 << ep->index)));
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
+ (unsigned long)usba_ep_readl(ep, CFG));
+ DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
+ (unsigned long)usba_readl(udc, INT_ENB));
+
+ return 0;
+}
+
+static int usba_ep_disable(struct usb_ep *_ep)
+{
+ struct usba_ep *ep = to_usba_ep(_ep);
+ struct usba_udc *udc = ep->udc;
+ LIST_HEAD(req_list);
+ unsigned long flags;
+
+ DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ if (!ep->desc) {
+ spin_unlock_irqrestore(&udc->lock, flags);
+ DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
+ return -EINVAL;
+ }
+ ep->desc = NULL;
+
+ list_splice_init(&ep->queue, &req_list);
+ if (ep->can_dma) {
+ usba_dma_writel(ep, CONTROL, 0);
+ usba_dma_writel(ep, ADDRESS, 0);
+ usba_dma_readl(ep, STATUS);
+ }
+ usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
+ usba_writel(udc, INT_ENB,
+ usba_readl(udc, INT_ENB)
+ & ~USBA_BF(EPT_INT, 1 << ep->index));
+
+ request_complete_list(ep, &req_list, -ESHUTDOWN);
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static struct usb_request *
+usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+ struct usba_request *req;
+
+ DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
+
+ req = kzalloc(sizeof(*req), gfp_flags);
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+ req->req.dma = DMA_ADDR_INVALID;
+
+ return &req->req;
+}
+
+static void
+usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct usba_request *req = to_usba_req(_req);
+
+ DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
+
+ kfree(req);
+}
+
+static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
+ struct usba_request *req, gfp_t gfp_flags)
+{
+ unsigned long flags;
+ int ret;
+
+ DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
+ ep->ep.name, req->req.length, req->req.dma,
+ req->req.zero ? 'Z' : 'z',
+ req->req.short_not_ok ? 'S' : 's',
+ req->req.no_interrupt ? 'I' : 'i');
+
+ if (req->req.length > 0x10000) {
+ /* Lengths from 0 to 65536 (inclusive) are supported */
+ DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
+ return -EINVAL;
+ }
+
+ req->using_dma = 1;
+
+ if (req->req.dma == DMA_ADDR_INVALID) {
+ req->req.dma = dma_map_single(
+ &udc->pdev->dev, req->req.buf, req->req.length,
+ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->mapped = 1;
+ } else {
+ dma_sync_single_for_device(
+ &udc->pdev->dev, req->req.dma, req->req.length,
+ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->mapped = 0;
+ }
+
+ req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
+ | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
+ | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
+
+ if (ep->is_in)
+ req->ctrl |= USBA_DMA_END_BUF_EN;
+
+ /*
+ * Add this request to the queue and submit for DMA if
+ * possible. Check if we're still alive first -- we may have
+ * received a reset since last time we checked.
+ */
+ ret = -ESHUTDOWN;
+ spin_lock_irqsave(&udc->lock, flags);
+ if (ep->desc) {
+ if (list_empty(&ep->queue))
+ submit_request(ep, req);
+
+ list_add_tail(&req->queue, &ep->queue);
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return ret;
+}
+
+static int
+usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+ struct usba_request *req = to_usba_req(_req);
+ struct usba_ep *ep = to_usba_ep(_ep);
+ struct usba_udc *udc = ep->udc;
+ unsigned long flags;
+ int ret;
+
+ DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
+ ep->ep.name, req, _req->length);
+
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
+ return -ESHUTDOWN;
+
+ req->submitted = 0;
+ req->using_dma = 0;
+ req->last_transaction = 0;
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ if (ep->can_dma)
+ return queue_dma(udc, ep, req, gfp_flags);
+
+ /* May have received a reset since last time we checked */
+ ret = -ESHUTDOWN;
+ spin_lock_irqsave(&udc->lock, flags);
+ if (ep->desc) {
+ list_add_tail(&req->queue, &ep->queue);
+
+ if (ep->is_in || (ep_is_control(ep)
+ && (ep->state == DATA_STAGE_IN
+ || ep->state == STATUS_STAGE_IN)))
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+ else
+ usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return ret;
+}
+
+static void
+usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
+{
+ req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
+}
+
+static int stop_dma(struct usba_ep *ep, u32 *pstatus)
+{
+ unsigned int timeout;
+ u32 status;
+
+ /*
+ * Stop the DMA controller. When writing both CH_EN
+ * and LINK to 0, the other bits are not affected.
+ */
+ usba_dma_writel(ep, CONTROL, 0);
+
+ /* Wait for the FIFO to empty */
+ for (timeout = 40; timeout; --timeout) {
+ status = usba_dma_readl(ep, STATUS);
+ if (!(status & USBA_DMA_CH_EN))
+ break;
+ udelay(1);
+ }
+
+ if (pstatus)
+ *pstatus = status;
+
+ if (timeout == 0) {
+ dev_err(&ep->udc->pdev->dev,
+ "%s: timed out waiting for DMA FIFO to empty\n",
+ ep->ep.name);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct usba_ep *ep = to_usba_ep(_ep);
+ struct usba_udc *udc = ep->udc;
+ struct usba_request *req = to_usba_req(_req);
+ unsigned long flags;
+ u32 status;
+
+ DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
+ ep->ep.name, req);
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ if (req->using_dma) {
+ /*
+ * If this request is currently being transferred,
+ * stop the DMA controller and reset the FIFO.
+ */
+ if (ep->queue.next == &req->queue) {
+ status = usba_dma_readl(ep, STATUS);
+ if (status & USBA_DMA_CH_EN)
+ stop_dma(ep, &status);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ ep->last_dma_status = status;
+#endif
+
+ usba_writel(udc, EPT_RST, 1 << ep->index);
+
+ usba_update_req(ep, req, status);
+ }
+ }
+
+ /*
+ * Errors should stop the queue from advancing until the
+ * completion function returns.
+ */
+ list_del_init(&req->queue);
+
+ request_complete(ep, req, -ECONNRESET);
+
+ /* Process the next request if any */
+ submit_next_request(ep);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static int usba_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct usba_ep *ep = to_usba_ep(_ep);
+ struct usba_udc *udc = ep->udc;
+ unsigned long flags;
+ int ret = 0;
+
+ DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
+ value ? "set" : "clear");
+
+ if (!ep->desc) {
+ DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
+ ep->ep.name);
+ return -ENODEV;
+ }
+ if (ep->is_isoc) {
+ DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
+ ep->ep.name);
+ return -ENOTTY;
+ }
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /*
+ * We can't halt IN endpoints while there are still data to be
+ * transferred
+ */
+ if (!list_empty(&ep->queue)
+ || ((value && ep->is_in && (usba_ep_readl(ep, STA)
+ & USBA_BF(BUSY_BANKS, -1L))))) {
+ ret = -EAGAIN;
+ } else {
+ if (value)
+ usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
+ else
+ usba_ep_writel(ep, CLR_STA,
+ USBA_FORCE_STALL | USBA_TOGGLE_CLR);
+ usba_ep_readl(ep, STA);
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return ret;
+}
+
+static int usba_ep_fifo_status(struct usb_ep *_ep)
+{
+ struct usba_ep *ep = to_usba_ep(_ep);
+
+ return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
+}
+
+static void usba_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct usba_ep *ep = to_usba_ep(_ep);
+ struct usba_udc *udc = ep->udc;
+
+ usba_writel(udc, EPT_RST, 1 << ep->index);
+}
+
+static const struct usb_ep_ops usba_ep_ops = {
+ .enable = usba_ep_enable,
+ .disable = usba_ep_disable,
+ .alloc_request = usba_ep_alloc_request,
+ .free_request = usba_ep_free_request,
+ .queue = usba_ep_queue,
+ .dequeue = usba_ep_dequeue,
+ .set_halt = usba_ep_set_halt,
+ .fifo_status = usba_ep_fifo_status,
+ .fifo_flush = usba_ep_fifo_flush,
+};
+
+static int usba_udc_get_frame(struct usb_gadget *gadget)
+{
+ struct usba_udc *udc = to_usba_udc(gadget);
+
+ return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
+}
+
+static int usba_udc_wakeup(struct usb_gadget *gadget)
+{
+ struct usba_udc *udc = to_usba_udc(gadget);
+ unsigned long flags;
+ u32 ctrl;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+ ctrl = usba_readl(udc, CTRL);
+ usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP);
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return ret;
+}
+
+static int
+usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
+{
+ struct usba_udc *udc = to_usba_udc(gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ if (is_selfpowered)
+ udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+ else
+ udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static const struct usb_gadget_ops usba_udc_ops = {
+ .get_frame = usba_udc_get_frame,
+ .wakeup = usba_udc_wakeup,
+ .set_selfpowered = usba_udc_set_selfpowered,
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+{ \
+ .ep = { \
+ .ops = &usba_ep_ops, \
+ .name = nam, \
+ .maxpacket = maxpkt, \
+ }, \
+ .udc = &the_udc, \
+ .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .index = idx, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+}
+
+static struct usba_ep usba_ep[] = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1in-bulk", 1, 512, 2, 1, 1),
+ EP("ep2out-bulk", 2, 512, 2, 1, 1),
+ EP("ep3in-int", 3, 64, 3, 1, 0),
+ EP("ep4out-int", 4, 64, 3, 1, 0),
+ EP("ep5in-iso", 5, 1024, 3, 1, 1),
+ EP("ep6out-iso", 6, 1024, 3, 1, 1),
+};
+#undef EP
+
+static struct usb_endpoint_descriptor usba_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = __constant_cpu_to_le16(64),
+ /* FIXME: I have no idea what to put here */
+ .bInterval = 1,
+};
+
+static void nop_release(struct device *dev)
+{
+
+}
+
+static struct usba_udc the_udc = {
+ .gadget = {
+ .ops = &usba_udc_ops,
+ .ep0 = &usba_ep[0].ep,
+ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
+ .is_dualspeed = 1,
+ .name = "atmel_usba_udc",
+ .dev = {
+ .bus_id = "gadget",
+ .release = nop_release,
+ },
+ },
+
+ .lock = SPIN_LOCK_UNLOCKED,
+};
+
+/*
+ * Called with interrupts disabled and udc->lock held.
+ */
+static void reset_all_endpoints(struct usba_udc *udc)
+{
+ struct usba_ep *ep;
+ struct usba_request *req, *tmp_req;
+
+ usba_writel(udc, EPT_RST, ~0UL);
+
+ ep = to_usba_ep(udc->gadget.ep0);
+ list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
+ list_del_init(&req->queue);
+ request_complete(ep, req, -ECONNRESET);
+ }
+
+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+ if (ep->desc) {
+ spin_unlock(&udc->lock);
+ usba_ep_disable(&ep->ep);
+ spin_lock(&udc->lock);
+ }
+ }
+}
+
+static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
+{
+ struct usba_ep *ep;
+
+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+ return to_usba_ep(udc->gadget.ep0);
+
+ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+ u8 bEndpointAddress;
+
+ if (!ep->desc)
+ continue;
+ bEndpointAddress = ep->desc->bEndpointAddress;
+ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+ continue;
+ if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
+ == (wIndex & USB_ENDPOINT_NUMBER_MASK))
+ return ep;
+ }
+
+ return NULL;
+}
+
+/* Called with interrupts disabled and udc->lock held */
+static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
+{
+ usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
+ ep->state = WAIT_FOR_SETUP;
+}
+
+static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
+{
+ if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
+ return 1;
+ return 0;
+}
+
+static inline void set_address(struct usba_udc *udc, unsigned int addr)
+{
+ u32 regval;
+
+ DBG(DBG_BUS, "setting address %u...\n", addr);
+ regval = usba_readl(udc, CTRL);
+ regval = USBA_BFINS(DEV_ADDR, addr, regval);
+ usba_writel(udc, CTRL, regval);
+}
+
+static int do_test_mode(struct usba_udc *udc)
+{
+ static const char test_packet_buffer[] = {
+ /* JKJKJKJK * 9 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* JJKKJJKK * 8 */
+ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+ /* JJKKJJKK * 8 */
+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+ /* JJJJJJJKKKKKKK * 8 */
+ 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ /* JJJJJJJK * 8 */
+ 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
+ /* {JKKKKKKK * 10}, JK */
+ 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
+ };
+ struct usba_ep *ep;
+ struct device *dev = &udc->pdev->dev;
+ int test_mode;
+
+ test_mode = udc->test_mode;
+
+ /* Start from a clean slate */
+ reset_all_endpoints(udc);
+
+ switch (test_mode) {
+ case 0x0100:
+ /* Test_J */
+ usba_writel(udc, TST, USBA_TST_J_MODE);
+ dev_info(dev, "Entering Test_J mode...\n");
+ break;
+ case 0x0200:
+ /* Test_K */
+ usba_writel(udc, TST, USBA_TST_K_MODE);
+ dev_info(dev, "Entering Test_K mode...\n");
+ break;
+ case 0x0300:
+ /*
+ * Test_SE0_NAK: Force high-speed mode and set up ep0
+ * for Bulk IN transfers
+ */
+ ep = &usba_ep[0];
+ usba_writel(udc, TST,
+ USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
+ usba_ep_writel(ep, CFG,
+ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
+ | USBA_EPT_DIR_IN
+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
+ | USBA_BF(BK_NUMBER, 1));
+ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
+ set_protocol_stall(udc, ep);
+ dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
+ } else {
+ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+ dev_info(dev, "Entering Test_SE0_NAK mode...\n");
+ }
+ break;
+ case 0x0400:
+ /* Test_Packet */
+ ep = &usba_ep[0];
+ usba_ep_writel(ep, CFG,
+ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
+ | USBA_EPT_DIR_IN
+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
+ | USBA_BF(BK_NUMBER, 1));
+ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
+ set_protocol_stall(udc, ep);
+ dev_err(dev, "Test_Packet: ep0 not mapped\n");
+ } else {
+ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+ usba_writel(udc, TST, USBA_TST_PKT_MODE);
+ copy_to_fifo(ep->fifo, test_packet_buffer,
+ sizeof(test_packet_buffer));
+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+ dev_info(dev, "Entering Test_Packet mode...\n");
+ }
+ break;
+ default:
+ dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Avoid overly long expressions */
+static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
+{
+ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
+ return true;
+ return false;
+}
+
+static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
+{
+ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
+ return true;
+ return false;
+}
+
+static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
+{
+ if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
+ return true;
+ return false;
+}
+
+static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
+ struct usb_ctrlrequest *crq)
+{
+ int retval = 0;;
+
+ switch (crq->bRequest) {
+ case USB_REQ_GET_STATUS: {
+ u16 status;
+
+ if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
+ status = cpu_to_le16(udc->devstatus);
+ } else if (crq->bRequestType
+ == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
+ status = __constant_cpu_to_le16(0);
+ } else if (crq->bRequestType
+ == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
+ struct usba_ep *target;
+
+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+ if (!target)
+ goto stall;
+
+ status = 0;
+ if (is_stalled(udc, target))
+ status |= __constant_cpu_to_le16(1);
+ } else
+ goto delegate;
+
+ /* Write directly to the FIFO. No queueing is done. */
+ if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
+ goto stall;
+ ep->state = DATA_STAGE_IN;
+ __raw_writew(status, ep->fifo);
+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+ break;
+ }
+
+ case USB_REQ_CLEAR_FEATURE: {
+ if (crq->bRequestType == USB_RECIP_DEVICE) {
+ if (feature_is_dev_remote_wakeup(crq))
+ udc->devstatus
+ &= ~(1 << USB_DEVICE_REMOTE_WAKEUP);
+ else
+ /* Can't CLEAR_FEATURE TEST_MODE */
+ goto stall;
+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+ struct usba_ep *target;
+
+ if (crq->wLength != __constant_cpu_to_le16(0)
+ || !feature_is_ep_halt(crq))
+ goto stall;
+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+ if (!target)
+ goto stall;
+
+ usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
+ if (target->index != 0)
+ usba_ep_writel(target, CLR_STA,
+ USBA_TOGGLE_CLR);
+ } else {
+ goto delegate;
+ }
+
+ send_status(udc, ep);
+ break;
+ }
+
+ case USB_REQ_SET_FEATURE: {
+ if (crq->bRequestType == USB_RECIP_DEVICE) {
+ if (feature_is_dev_test_mode(crq)) {
+ send_status(udc, ep);
+ ep->state = STATUS_STAGE_TEST;
+ udc->test_mode = le16_to_cpu(crq->wIndex);
+ return 0;
+ } else if (feature_is_dev_remote_wakeup(crq)) {
+ udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP;
+ } else {
+ goto stall;
+ }
+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+ struct usba_ep *target;
+
+ if (crq->wLength != __constant_cpu_to_le16(0)
+ || !feature_is_ep_halt(crq))
+ goto stall;
+
+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+ if (!target)
+ goto stall;
+
+ usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
+ } else
+ goto delegate;
+
+ send_status(udc, ep);
+ break;
+ }
+
+ case USB_REQ_SET_ADDRESS:
+ if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+ goto delegate;
+
+ set_address(udc, le16_to_cpu(crq->wValue));
+ send_status(udc, ep);
+ ep->state = STATUS_STAGE_ADDR;
+ break;
+
+ default:
+delegate:
+ spin_unlock(&udc->lock);
+ retval = udc->driver->setup(&udc->gadget, crq);
+ spin_lock(&udc->lock);
+ }
+
+ return retval;
+
+stall:
+ printk(KERN_ERR
+ "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
+ "halting endpoint...\n",
+ ep->ep.name, crq->bRequestType, crq->bRequest,
+ le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
+ le16_to_cpu(crq->wLength));
+ set_protocol_stall(udc, ep);
+ return -1;
+}
+
+static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+ struct usba_request *req;
+ u32 epstatus;
+ u32 epctrl;
+
+restart:
+ epstatus = usba_ep_readl(ep, STA);
+ epctrl = usba_ep_readl(ep, CTL);
+
+ DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
+ ep->ep.name, ep->state, epstatus, epctrl);
+
+ req = NULL;
+ if (!list_empty(&ep->queue))
+ req = list_entry(ep->queue.next,
+ struct usba_request, queue);
+
+ if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
+ if (req->submitted)
+ next_fifo_transaction(ep, req);
+ else
+ submit_request(ep, req);
+
+ if (req->last_transaction) {
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+ }
+ goto restart;
+ }
+ if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
+ usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
+
+ switch (ep->state) {
+ case DATA_STAGE_IN:
+ usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+ ep->state = STATUS_STAGE_OUT;
+ break;
+ case STATUS_STAGE_ADDR:
+ /* Activate our new address */
+ usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
+ | USBA_FADDR_EN));
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+ ep->state = WAIT_FOR_SETUP;
+ break;
+ case STATUS_STAGE_IN:
+ if (req) {
+ list_del_init(&req->queue);
+ request_complete(ep, req, 0);
+ submit_next_request(ep);
+ }
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+ ep->state = WAIT_FOR_SETUP;
+ break;
+ case STATUS_STAGE_TEST:
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+ ep->state = WAIT_FOR_SETUP;
+ if (do_test_mode(udc))
+ set_protocol_stall(udc, ep);
+ break;
+ default:
+ printk(KERN_ERR
+ "udc: %s: TXCOMP: Invalid endpoint state %d, "
+ "halting endpoint...\n",
+ ep->ep.name, ep->state);
+ set_protocol_stall(udc, ep);
+ break;
+ }
+
+ goto restart;
+ }
+ if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
+ switch (ep->state) {
+ case STATUS_STAGE_OUT:
+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+
+ if (req) {
+ list_del_init(&req->queue);
+ request_complete(ep, req, 0);
+ }
+ ep->state = WAIT_FOR_SETUP;
+ break;
+
+ case DATA_STAGE_OUT:
+ receive_data(ep);
+ break;
+
+ default:
+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+ printk(KERN_ERR
+ "udc: %s: RXRDY: Invalid endpoint state %d, "
+ "halting endpoint...\n",
+ ep->ep.name, ep->state);
+ set_protocol_stall(udc, ep);
+ break;
+ }
+
+ goto restart;
+ }
+ if (epstatus & USBA_RX_SETUP) {
+ union {
+ struct usb_ctrlrequest crq;
+ unsigned long data[2];
+ } crq;
+ unsigned int pkt_len;
+ int ret;
+
+ if (ep->state != WAIT_FOR_SETUP) {
+ /*
+ * Didn't expect a SETUP packet at this
+ * point. Clean up any pending requests (which
+ * may be successful).
+ */
+ int status = -EPROTO;
+
+ /*
+ * RXRDY and TXCOMP are dropped when SETUP
+ * packets arrive. Just pretend we received
+ * the status packet.
+ */
+ if (ep->state == STATUS_STAGE_OUT
+ || ep->state == STATUS_STAGE_IN) {
+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+ status = 0;
+ }
+
+ if (req) {
+ list_del_init(&req->queue);
+ request_complete(ep, req, status);
+ }
+ }
+
+ pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
+ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
+ if (pkt_len != sizeof(crq)) {
+ printk(KERN_WARNING "udc: Invalid packet length %u "
+ "(expected %lu)\n", pkt_len, sizeof(crq));
+ set_protocol_stall(udc, ep);
+ return;
+ }
+
+ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
+ copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
+
+ /* Free up one bank in the FIFO so that we can
+ * generate or receive a reply right away. */
+ usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
+
+ /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
+ ep->state, crq.crq.bRequestType,
+ crq.crq.bRequest); */
+
+ if (crq.crq.bRequestType & USB_DIR_IN) {
+ /*
+ * The USB 2.0 spec states that "if wLength is
+ * zero, there is no data transfer phase."
+ * However, testusb #14 seems to actually
+ * expect a data phase even if wLength = 0...
+ */
+ ep->state = DATA_STAGE_IN;
+ } else {
+ if (crq.crq.wLength != __constant_cpu_to_le16(0))
+ ep->state = DATA_STAGE_OUT;
+ else
+ ep->state = STATUS_STAGE_IN;
+ }
+
+ ret = -1;
+ if (ep->index == 0)
+ ret = handle_ep0_setup(udc, ep, &crq.crq);
+ else {
+ spin_unlock(&udc->lock);
+ ret = udc->driver->setup(&udc->gadget, &crq.crq);
+ spin_lock(&udc->lock);
+ }
+
+ DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
+ crq.crq.bRequestType, crq.crq.bRequest,
+ le16_to_cpu(crq.crq.wLength), ep->state, ret);
+
+ if (ret < 0) {
+ /* Let the host know that we failed */
+ set_protocol_stall(udc, ep);
+ }
+ }
+}
+
+static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+ struct usba_request *req;
+ u32 epstatus;
+ u32 epctrl;
+
+ epstatus = usba_ep_readl(ep, STA);
+ epctrl = usba_ep_readl(ep, CTL);
+
+ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
+
+ while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
+ DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
+
+ if (list_empty(&ep->queue)) {
+ dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+ return;
+ }
+
+ req = list_entry(ep->queue.next, struct usba_request, queue);
+
+ if (req->using_dma) {
+ /* Send a zero-length packet */
+ usba_ep_writel(ep, SET_STA,
+ USBA_TX_PK_RDY);
+ usba_ep_writel(ep, CTL_DIS,
+ USBA_TX_PK_RDY);
+ list_del_init(&req->queue);
+ submit_next_request(ep);
+ request_complete(ep, req, 0);
+ } else {
+ if (req->submitted)
+ next_fifo_transaction(ep, req);
+ else
+ submit_request(ep, req);
+
+ if (req->last_transaction) {
+ list_del_init(&req->queue);
+ submit_next_request(ep);
+ request_complete(ep, req, 0);
+ }
+ }
+
+ epstatus = usba_ep_readl(ep, STA);
+ epctrl = usba_ep_readl(ep, CTL);
+ }
+ if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
+ DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
+ receive_data(ep);
+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+ }
+}
+
+static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+ struct usba_request *req;
+ u32 status, control, pending;
+
+ status = usba_dma_readl(ep, STATUS);
+ control = usba_dma_readl(ep, CONTROL);
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ ep->last_dma_status = status;
+#endif
+ pending = status & control;
+ DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
+
+ if (status & USBA_DMA_CH_EN) {
+ dev_err(&udc->pdev->dev,
+ "DMA_CH_EN is set after transfer is finished!\n");
+ dev_err(&udc->pdev->dev,
+ "status=%#08x, pending=%#08x, control=%#08x\n",
+ status, pending, control);
+
+ /*
+ * try to pretend nothing happened. We might have to
+ * do something here...
+ */
+ }
+
+ if (list_empty(&ep->queue))
+ /* Might happen if a reset comes along at the right moment */
+ return;
+
+ if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
+ req = list_entry(ep->queue.next, struct usba_request, queue);
+ usba_update_req(ep, req, status);
+
+ list_del_init(&req->queue);
+ submit_next_request(ep);
+ request_complete(ep, req, 0);
+ }
+}
+
+static irqreturn_t usba_udc_irq(int irq, void *devid)
+{
+ struct usba_udc *udc = devid;
+ u32 status;
+ u32 dma_status;
+ u32 ep_status;
+
+ spin_lock(&udc->lock);
+
+ status = usba_readl(udc, INT_STA);
+ DBG(DBG_INT, "irq, status=%#08x\n", status);
+
+ if (status & USBA_DET_SUSPEND) {
+ usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
+ DBG(DBG_BUS, "Suspend detected\n");
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+ && udc->driver && udc->driver->suspend) {
+ spin_unlock(&udc->lock);
+ udc->driver->suspend(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+ }
+
+ if (status & USBA_WAKE_UP) {
+ usba_writel(udc, INT_CLR, USBA_WAKE_UP);
+ DBG(DBG_BUS, "Wake Up CPU detected\n");
+ }
+
+ if (status & USBA_END_OF_RESUME) {
+ usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
+ DBG(DBG_BUS, "Resume detected\n");
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+ && udc->driver && udc->driver->resume) {
+ spin_unlock(&udc->lock);
+ udc->driver->resume(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+ }
+
+ dma_status = USBA_BFEXT(DMA_INT, status);
+ if (dma_status) {
+ int i;
+
+ for (i = 1; i < USBA_NR_ENDPOINTS; i++)
+ if (dma_status & (1 << i))
+ usba_dma_irq(udc, &usba_ep[i]);
+ }
+
+ ep_status = USBA_BFEXT(EPT_INT, status);
+ if (ep_status) {
+ int i;
+
+ for (i = 0; i < USBA_NR_ENDPOINTS; i++)
+ if (ep_status & (1 << i)) {
+ if (ep_is_control(&usba_ep[i]))
+ usba_control_irq(udc, &usba_ep[i]);
+ else
+ usba_ep_irq(udc, &usba_ep[i]);
+ }
+ }
+
+ if (status & USBA_END_OF_RESET) {
+ struct usba_ep *ep0;
+
+ usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
+ reset_all_endpoints(udc);
+
+ if (status & USBA_HIGH_SPEED) {
+ DBG(DBG_BUS, "High-speed bus reset detected\n");
+ udc->gadget.speed = USB_SPEED_HIGH;
+ } else {
+ DBG(DBG_BUS, "Full-speed bus reset detected\n");
+ udc->gadget.speed = USB_SPEED_FULL;
+ }
+
+ ep0 = &usba_ep[0];
+ ep0->desc = &usba_ep0_desc;
+ ep0->state = WAIT_FOR_SETUP;
+ usba_ep_writel(ep0, CFG,
+ (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
+ | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
+ usba_ep_writel(ep0, CTL_ENB,
+ USBA_EPT_ENABLE | USBA_RX_SETUP);
+ usba_writel(udc, INT_ENB,
+ (usba_readl(udc, INT_ENB)
+ | USBA_BF(EPT_INT, 1)
+ | USBA_DET_SUSPEND
+ | USBA_END_OF_RESUME));
+
+ if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
+ dev_warn(&udc->pdev->dev,
+ "WARNING: EP0 configuration is invalid!\n");
+ }
+
+ spin_unlock(&udc->lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t usba_vbus_irq(int irq, void *devid)
+{
+ struct usba_udc *udc = devid;
+ int vbus;
+
+ /* debounce */
+ udelay(10);
+
+ spin_lock(&udc->lock);
+
+ /* May happen if Vbus pin toggles during probe() */
+ if (!udc->driver)
+ goto out;
+
+ vbus = gpio_get_value(udc->vbus_pin);
+ if (vbus != udc->vbus_prev) {
+ if (vbus) {
+ usba_writel(udc, CTRL, USBA_EN_USBA);
+ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+ } else {
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ reset_all_endpoints(udc);
+ usba_writel(udc, CTRL, 0);
+ spin_unlock(&udc->lock);
+ udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+ udc->vbus_prev = vbus;
+ }
+
+out:
+ spin_unlock(&udc->lock);
+
+ return IRQ_HANDLED;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct usba_udc *udc = &the_udc;
+ unsigned long flags;
+ int ret;
+
+ if (!udc->pdev)
+ return -ENODEV;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ if (udc->driver) {
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return -EBUSY;
+ }
+
+ udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
+ udc->driver = driver;
+ udc->gadget.dev.driver = &driver->driver;
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ clk_enable(udc->pclk);
+ clk_enable(udc->hclk);
+
+ ret = driver->bind(&udc->gadget);
+ if (ret) {
+ DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
+ driver->driver.name, ret);
+ goto err_driver_bind;
+ }
+
+ DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
+
+ udc->vbus_prev = 0;
+ if (udc->vbus_pin != -1)
+ enable_irq(gpio_to_irq(udc->vbus_pin));
+
+ /* If Vbus is present, enable the controller and wait for reset */
+ spin_lock_irqsave(&udc->lock, flags);
+ if (vbus_is_present(udc) && udc->vbus_prev == 0) {
+ usba_writel(udc, CTRL, USBA_EN_USBA);
+ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+ }
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+
+err_driver_bind:
+ udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
+ return ret;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct usba_udc *udc = &the_udc;
+ unsigned long flags;
+
+ if (!udc->pdev)
+ return -ENODEV;
+ if (driver != udc->driver)
+ return -EINVAL;
+
+ if (udc->vbus_pin != -1)
+ disable_irq(gpio_to_irq(udc->vbus_pin));
+
+ spin_lock_irqsave(&udc->lock, flags);
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ reset_all_endpoints(udc);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ /* This will also disable the DP pullup */
+ usba_writel(udc, CTRL, 0);
+
+ driver->unbind(&udc->gadget);
+ udc->gadget.dev.driver = NULL;
+ udc->driver = NULL;
+
+ clk_disable(udc->hclk);
+ clk_disable(udc->pclk);
+
+ DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
+
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int __init usba_udc_probe(struct platform_device *pdev)
+{
+ struct usba_platform_data *pdata = pdev->dev.platform_data;
+ struct resource *regs, *fifo;
+ struct clk *pclk, *hclk;
+ struct usba_udc *udc = &the_udc;
+ int irq, ret, i;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
+ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
+ if (!regs || !fifo)
+ return -ENXIO;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ pclk = clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(pclk))
+ return PTR_ERR(pclk);
+ hclk = clk_get(&pdev->dev, "hclk");
+ if (IS_ERR(hclk)) {
+ ret = PTR_ERR(hclk);
+ goto err_get_hclk;
+ }
+
+ udc->pdev = pdev;
+ udc->pclk = pclk;
+ udc->hclk = hclk;
+ udc->vbus_pin = -1;
+
+ ret = -ENOMEM;
+ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ if (!udc->regs) {
+ dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
+ goto err_map_regs;
+ }
+ dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
+ (unsigned long)regs->start, udc->regs);
+ udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
+ if (!udc->fifo) {
+ dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
+ goto err_map_fifo;
+ }
+ dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
+ (unsigned long)fifo->start, udc->fifo);
+
+ device_initialize(&udc->gadget.dev);
+ udc->gadget.dev.parent = &pdev->dev;
+ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+
+ platform_set_drvdata(pdev, udc);
+
+ /* Make sure we start from a clean slate */
+ clk_enable(pclk);
+ usba_writel(udc, CTRL, 0);
+ clk_disable(pclk);
+
+ INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
+ usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
+ usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
+ usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
+ struct usba_ep *ep = &usba_ep[i];
+
+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ }
+
+ ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
+ irq, ret);
+ goto err_request_irq;
+ }
+ udc->irq = irq;
+
+ ret = device_add(&udc->gadget.dev);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
+ goto err_device_add;
+ }
+
+ if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
+ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
+ udc->vbus_pin = pdata->vbus_pin;
+
+ ret = request_irq(gpio_to_irq(udc->vbus_pin),
+ usba_vbus_irq, 0,
+ "atmel_usba_udc", udc);
+ if (ret) {
+ gpio_free(udc->vbus_pin);
+ udc->vbus_pin = -1;
+ dev_warn(&udc->pdev->dev,
+ "failed to request vbus irq; "
+ "assuming always on\n");
+ } else {
+ disable_irq(gpio_to_irq(udc->vbus_pin));
+ }
+ }
+ }
+
+ usba_init_debugfs(udc);
+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
+ usba_ep_init_debugfs(udc, &usba_ep[i]);
+
+ return 0;
+
+err_device_add:
+ free_irq(irq, udc);
+err_request_irq:
+ iounmap(udc->fifo);
+err_map_fifo:
+ iounmap(udc->regs);
+err_map_regs:
+ clk_put(hclk);
+err_get_hclk:
+ clk_put(pclk);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int __exit usba_udc_remove(struct platform_device *pdev)
+{
+ struct usba_udc *udc;
+ int i;
+
+ udc = platform_get_drvdata(pdev);
+
+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
+ usba_ep_cleanup_debugfs(&usba_ep[i]);
+ usba_cleanup_debugfs(udc);
+
+ if (udc->vbus_pin != -1)
+ gpio_free(udc->vbus_pin);
+
+ free_irq(udc->irq, udc);
+ iounmap(udc->fifo);
+ iounmap(udc->regs);
+ clk_put(udc->hclk);
+ clk_put(udc->pclk);
+
+ device_unregister(&udc->gadget.dev);
+
+ return 0;
+}
+
+static struct platform_driver udc_driver = {
+ .remove = __exit_p(usba_udc_remove),
+ .driver = {
+ .name = "atmel_usba_udc",
+ },
+};
+
+static int __init udc_init(void)
+{
+ return platform_driver_probe(&udc_driver, usba_udc_probe);
+}
+module_init(udc_init);
+
+static void __exit udc_exit(void)
+{
+ platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION("Atmel USBA UDC driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
new file mode 100644
index 000000000000..a68304e31a68
--- /dev/null
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -0,0 +1,352 @@
+/*
+ * Driver for the Atmel USBA high speed USB device controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
+#define __LINUX_USB_GADGET_USBA_UDC_H__
+
+/* USB register offsets */
+#define USBA_CTRL 0x0000
+#define USBA_FNUM 0x0004
+#define USBA_INT_ENB 0x0010
+#define USBA_INT_STA 0x0014
+#define USBA_INT_CLR 0x0018
+#define USBA_EPT_RST 0x001c
+#define USBA_TST 0x00e0
+
+/* USB endpoint register offsets */
+#define USBA_EPT_CFG 0x0000
+#define USBA_EPT_CTL_ENB 0x0004
+#define USBA_EPT_CTL_DIS 0x0008
+#define USBA_EPT_CTL 0x000c
+#define USBA_EPT_SET_STA 0x0014
+#define USBA_EPT_CLR_STA 0x0018
+#define USBA_EPT_STA 0x001c
+
+/* USB DMA register offsets */
+#define USBA_DMA_NXT_DSC 0x0000
+#define USBA_DMA_ADDRESS 0x0004
+#define USBA_DMA_CONTROL 0x0008
+#define USBA_DMA_STATUS 0x000c
+
+/* Bitfields in CTRL */
+#define USBA_DEV_ADDR_OFFSET 0
+#define USBA_DEV_ADDR_SIZE 7
+#define USBA_FADDR_EN (1 << 7)
+#define USBA_EN_USBA (1 << 8)
+#define USBA_DETACH (1 << 9)
+#define USBA_REMOTE_WAKE_UP (1 << 10)
+
+/* Bitfields in FNUM */
+#define USBA_MICRO_FRAME_NUM_OFFSET 0
+#define USBA_MICRO_FRAME_NUM_SIZE 3
+#define USBA_FRAME_NUMBER_OFFSET 3
+#define USBA_FRAME_NUMBER_SIZE 11
+#define USBA_FRAME_NUM_ERROR (1 << 31)
+
+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
+#define USBA_HIGH_SPEED (1 << 0)
+#define USBA_DET_SUSPEND (1 << 1)
+#define USBA_MICRO_SOF (1 << 2)
+#define USBA_SOF (1 << 3)
+#define USBA_END_OF_RESET (1 << 4)
+#define USBA_WAKE_UP (1 << 5)
+#define USBA_END_OF_RESUME (1 << 6)
+#define USBA_UPSTREAM_RESUME (1 << 7)
+#define USBA_EPT_INT_OFFSET 8
+#define USBA_EPT_INT_SIZE 16
+#define USBA_DMA_INT_OFFSET 24
+#define USBA_DMA_INT_SIZE 8
+
+/* Bitfields in EPT_RST */
+#define USBA_RST_OFFSET 0
+#define USBA_RST_SIZE 16
+
+/* Bitfields in USBA_TST */
+#define USBA_SPEED_CFG_OFFSET 0
+#define USBA_SPEED_CFG_SIZE 2
+#define USBA_TST_J_MODE (1 << 2)
+#define USBA_TST_K_MODE (1 << 3)
+#define USBA_TST_PKT_MODE (1 << 4)
+#define USBA_OPMODE2 (1 << 5)
+
+/* Bitfields in EPT_CFG */
+#define USBA_EPT_SIZE_OFFSET 0
+#define USBA_EPT_SIZE_SIZE 3
+#define USBA_EPT_DIR_IN (1 << 3)
+#define USBA_EPT_TYPE_OFFSET 4
+#define USBA_EPT_TYPE_SIZE 2
+#define USBA_BK_NUMBER_OFFSET 6
+#define USBA_BK_NUMBER_SIZE 2
+#define USBA_NB_TRANS_OFFSET 8
+#define USBA_NB_TRANS_SIZE 2
+#define USBA_EPT_MAPPED (1 << 31)
+
+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
+#define USBA_EPT_ENABLE (1 << 0)
+#define USBA_AUTO_VALID (1 << 1)
+#define USBA_INTDIS_DMA (1 << 3)
+#define USBA_NYET_DIS (1 << 4)
+#define USBA_DATAX_RX (1 << 6)
+#define USBA_MDATA_RX (1 << 7)
+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
+#define USBA_BUSY_BANK_IE (1 << 18)
+
+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
+#define USBA_FORCE_STALL (1 << 5)
+#define USBA_TOGGLE_CLR (1 << 6)
+#define USBA_TOGGLE_SEQ_OFFSET 6
+#define USBA_TOGGLE_SEQ_SIZE 2
+#define USBA_ERR_OVFLW (1 << 8)
+#define USBA_RX_BK_RDY (1 << 9)
+#define USBA_KILL_BANK (1 << 9)
+#define USBA_TX_COMPLETE (1 << 10)
+#define USBA_TX_PK_RDY (1 << 11)
+#define USBA_ISO_ERR_TRANS (1 << 11)
+#define USBA_RX_SETUP (1 << 12)
+#define USBA_ISO_ERR_FLOW (1 << 12)
+#define USBA_STALL_SENT (1 << 13)
+#define USBA_ISO_ERR_CRC (1 << 13)
+#define USBA_ISO_ERR_NBTRANS (1 << 13)
+#define USBA_NAK_IN (1 << 14)
+#define USBA_ISO_ERR_FLUSH (1 << 14)
+#define USBA_NAK_OUT (1 << 15)
+#define USBA_CURRENT_BANK_OFFSET 16
+#define USBA_CURRENT_BANK_SIZE 2
+#define USBA_BUSY_BANKS_OFFSET 18
+#define USBA_BUSY_BANKS_SIZE 2
+#define USBA_BYTE_COUNT_OFFSET 20
+#define USBA_BYTE_COUNT_SIZE 11
+#define USBA_SHORT_PACKET (1 << 31)
+
+/* Bitfields in DMA_CONTROL */
+#define USBA_DMA_CH_EN (1 << 0)
+#define USBA_DMA_LINK (1 << 1)
+#define USBA_DMA_END_TR_EN (1 << 2)
+#define USBA_DMA_END_BUF_EN (1 << 3)
+#define USBA_DMA_END_TR_IE (1 << 4)
+#define USBA_DMA_END_BUF_IE (1 << 5)
+#define USBA_DMA_DESC_LOAD_IE (1 << 6)
+#define USBA_DMA_BURST_LOCK (1 << 7)
+#define USBA_DMA_BUF_LEN_OFFSET 16
+#define USBA_DMA_BUF_LEN_SIZE 16
+
+/* Bitfields in DMA_STATUS */
+#define USBA_DMA_CH_ACTIVE (1 << 1)
+#define USBA_DMA_END_TR_ST (1 << 4)
+#define USBA_DMA_END_BUF_ST (1 << 5)
+#define USBA_DMA_DESC_LOAD_ST (1 << 6)
+
+/* Constants for SPEED_CFG */
+#define USBA_SPEED_CFG_NORMAL 0
+#define USBA_SPEED_CFG_FORCE_HIGH 2
+#define USBA_SPEED_CFG_FORCE_FULL 3
+
+/* Constants for EPT_SIZE */
+#define USBA_EPT_SIZE_8 0
+#define USBA_EPT_SIZE_16 1
+#define USBA_EPT_SIZE_32 2
+#define USBA_EPT_SIZE_64 3
+#define USBA_EPT_SIZE_128 4
+#define USBA_EPT_SIZE_256 5
+#define USBA_EPT_SIZE_512 6
+#define USBA_EPT_SIZE_1024 7
+
+/* Constants for EPT_TYPE */
+#define USBA_EPT_TYPE_CONTROL 0
+#define USBA_EPT_TYPE_ISO 1
+#define USBA_EPT_TYPE_BULK 2
+#define USBA_EPT_TYPE_INT 3
+
+/* Constants for BK_NUMBER */
+#define USBA_BK_NUMBER_ZERO 0
+#define USBA_BK_NUMBER_ONE 1
+#define USBA_BK_NUMBER_DOUBLE 2
+#define USBA_BK_NUMBER_TRIPLE 3
+
+/* Bit manipulation macros */
+#define USBA_BF(name, value) \
+ (((value) & ((1 << USBA_##name##_SIZE) - 1)) \
+ << USBA_##name##_OFFSET)
+#define USBA_BFEXT(name, value) \
+ (((value) >> USBA_##name##_OFFSET) \
+ & ((1 << USBA_##name##_SIZE) - 1))
+#define USBA_BFINS(name, value, old) \
+ (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \
+ << USBA_##name##_OFFSET)) \
+ | USBA_BF(name, value))
+
+/* Register access macros */
+#define usba_readl(udc, reg) \
+ __raw_readl((udc)->regs + USBA_##reg)
+#define usba_writel(udc, reg, value) \
+ __raw_writel((value), (udc)->regs + USBA_##reg)
+#define usba_ep_readl(ep, reg) \
+ __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
+#define usba_ep_writel(ep, reg, value) \
+ __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
+#define usba_dma_readl(ep, reg) \
+ __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
+#define usba_dma_writel(ep, reg, value) \
+ __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
+
+/* Calculate base address for a given endpoint or DMA controller */
+#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20)
+#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10)
+#define USBA_FIFO_BASE(x) ((x) << 16)
+
+/* Synth parameters */
+#define USBA_NR_ENDPOINTS 7
+
+#define EP0_FIFO_SIZE 64
+#define EP0_EPT_SIZE USBA_EPT_SIZE_64
+#define EP0_NR_BANKS 1
+
+/*
+ * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
+ * provide this information?
+ */
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+#define FIFO_IOMEM_ID 0
+#define CTRL_IOMEM_ID 1
+
+#ifdef DEBUG
+#define DBG_ERR 0x0001 /* report all error returns */
+#define DBG_HW 0x0002 /* debug hardware initialization */
+#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
+#define DBG_INT 0x0008 /* interrupts */
+#define DBG_BUS 0x0010 /* report changes in bus state */
+#define DBG_QUEUE 0x0020 /* debug request queue processing */
+#define DBG_FIFO 0x0040 /* debug FIFO contents */
+#define DBG_DMA 0x0080 /* debug DMA handling */
+#define DBG_REQ 0x0100 /* print out queued request length */
+#define DBG_ALL 0xffff
+#define DBG_NONE 0x0000
+
+#define DEBUG_LEVEL (DBG_ERR)
+#define DBG(level, fmt, ...) \
+ do { \
+ if ((level) & DEBUG_LEVEL) \
+ printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
+ } while (0)
+#else
+#define DBG(level, fmt...)
+#endif
+
+enum usba_ctrl_state {
+ WAIT_FOR_SETUP,
+ DATA_STAGE_IN,
+ DATA_STAGE_OUT,
+ STATUS_STAGE_IN,
+ STATUS_STAGE_OUT,
+ STATUS_STAGE_ADDR,
+ STATUS_STAGE_TEST,
+};
+/*
+ EP_STATE_IDLE,
+ EP_STATE_SETUP,
+ EP_STATE_IN_DATA,
+ EP_STATE_OUT_DATA,
+ EP_STATE_SET_ADDR_STATUS,
+ EP_STATE_RX_STATUS,
+ EP_STATE_TX_STATUS,
+ EP_STATE_HALT,
+*/
+
+struct usba_dma_desc {
+ dma_addr_t next;
+ dma_addr_t addr;
+ u32 ctrl;
+};
+
+struct usba_ep {
+ int state;
+ void __iomem *ep_regs;
+ void __iomem *dma_regs;
+ void __iomem *fifo;
+ struct usb_ep ep;
+ struct usba_udc *udc;
+
+ struct list_head queue;
+ const struct usb_endpoint_descriptor *desc;
+
+ u16 fifo_size;
+ u8 nr_banks;
+ u8 index;
+ unsigned int can_dma:1;
+ unsigned int can_isoc:1;
+ unsigned int is_isoc:1;
+ unsigned int is_in:1;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ u32 last_dma_status;
+ struct dentry *debugfs_dir;
+ struct dentry *debugfs_queue;
+ struct dentry *debugfs_dma_status;
+ struct dentry *debugfs_state;
+#endif
+};
+
+struct usba_request {
+ struct usb_request req;
+ struct list_head queue;
+
+ u32 ctrl;
+
+ unsigned int submitted:1;
+ unsigned int last_transaction:1;
+ unsigned int using_dma:1;
+ unsigned int mapped:1;
+};
+
+struct usba_udc {
+ /* Protect hw registers from concurrent modifications */
+ spinlock_t lock;
+
+ void __iomem *regs;
+ void __iomem *fifo;
+
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct platform_device *pdev;
+ int irq;
+ int vbus_pin;
+ struct clk *pclk;
+ struct clk *hclk;
+
+ u16 devstatus;
+
+ u16 test_mode;
+ int vbus_prev;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ struct dentry *debugfs_root;
+ struct dentry *debugfs_regs;
+#endif
+};
+
+static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
+{
+ return container_of(ep, struct usba_ep, ep);
+}
+
+static inline struct usba_request *to_usba_req(struct usb_request *req)
+{
+ return container_of(req, struct usba_request, req);
+}
+
+static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
+{
+ return container_of(gadget, struct usba_udc, gadget);
+}
+
+#define ep_is_control(ep) ((ep)->index == 0)
+#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
+
+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index c6760aee1e5c..a4e54b2743f0 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -25,7 +25,7 @@
#include <linux/device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
/**
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index d008d1360a7a..9db2482bdfa2 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -46,7 +46,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/usb.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -962,13 +962,13 @@ static struct platform_driver dummy_udc_driver = {
static int dummy_urb_enqueue (
struct usb_hcd *hcd,
- struct usb_host_endpoint *ep,
struct urb *urb,
gfp_t mem_flags
) {
struct dummy *dum;
struct urbp *urbp;
unsigned long flags;
+ int rc;
if (!urb->transfer_buffer && urb->transfer_buffer_length)
return -EINVAL;
@@ -980,6 +980,11 @@ static int dummy_urb_enqueue (
dum = hcd_to_dummy (hcd);
spin_lock_irqsave (&dum->lock, flags);
+ rc = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (rc) {
+ kfree(urbp);
+ goto done;
+ }
if (!dum->udev) {
dum->udev = urb->dev;
@@ -996,36 +1001,35 @@ static int dummy_urb_enqueue (
if (!timer_pending (&dum->timer))
mod_timer (&dum->timer, jiffies + 1);
- spin_unlock_irqrestore (&dum->lock, flags);
- return 0;
+ done:
+ spin_unlock_irqrestore(&dum->lock, flags);
+ return rc;
}
-static int dummy_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct dummy *dum;
unsigned long flags;
+ int rc;
/* giveback happens automatically in timer callback,
* so make sure the callback happens */
dum = hcd_to_dummy (hcd);
spin_lock_irqsave (&dum->lock, flags);
- if (dum->rh_state != DUMMY_RH_RUNNING && !list_empty(&dum->urbp_list))
+
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (!rc && dum->rh_state != DUMMY_RH_RUNNING &&
+ !list_empty(&dum->urbp_list))
mod_timer (&dum->timer, jiffies);
- spin_unlock_irqrestore (&dum->lock, flags);
- return 0;
-}
-static void maybe_set_status (struct urb *urb, int status)
-{
- spin_lock (&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
- spin_unlock (&urb->lock);
+ spin_unlock_irqrestore (&dum->lock, flags);
+ return rc;
}
/* transfer up to a frame's worth; caller must own lock */
static int
-transfer (struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit)
+transfer(struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit,
+ int *status)
{
struct dummy_request *req;
@@ -1088,24 +1092,20 @@ top:
*
* partially filling a buffer optionally blocks queue advances
* (so completion handlers can clean up the queue) but we don't
- * need to emulate such data-in-flight. so we only show part
- * of the URB_SHORT_NOT_OK effect: completion status.
+ * need to emulate such data-in-flight.
*/
if (is_short) {
if (host_len == dev_len) {
req->req.status = 0;
- maybe_set_status (urb, 0);
+ *status = 0;
} else if (to_host) {
req->req.status = 0;
if (dev_len > host_len)
- maybe_set_status (urb, -EOVERFLOW);
+ *status = -EOVERFLOW;
else
- maybe_set_status (urb,
- (urb->transfer_flags
- & URB_SHORT_NOT_OK)
- ? -EREMOTEIO : 0);
+ *status = 0;
} else if (!to_host) {
- maybe_set_status (urb, 0);
+ *status = 0;
if (host_len > dev_len)
req->req.status = -EOVERFLOW;
else
@@ -1119,9 +1119,8 @@ top:
req->req.status = 0;
if (urb->transfer_buffer_length == urb->actual_length
&& !(urb->transfer_flags
- & URB_ZERO_PACKET)) {
- maybe_set_status (urb, 0);
- }
+ & URB_ZERO_PACKET))
+ *status = 0;
}
/* device side completion --> continuable */
@@ -1137,7 +1136,7 @@ top:
}
/* host side completion --> terminate */
- if (urb->status != -EINPROGRESS)
+ if (*status != -EINPROGRESS)
break;
/* rescan to continue with any other queued i/o */
@@ -1248,12 +1247,12 @@ restart:
u8 address;
struct dummy_ep *ep = NULL;
int type;
+ int status = -EINPROGRESS;
urb = urbp->urb;
- if (urb->status != -EINPROGRESS) {
- /* likely it was just unlinked */
+ if (urb->unlinked)
goto return_urb;
- } else if (dum->rh_state != DUMMY_RH_RUNNING)
+ else if (dum->rh_state != DUMMY_RH_RUNNING)
continue;
type = usb_pipetype (urb->pipe);
@@ -1274,7 +1273,7 @@ restart:
dev_dbg (dummy_dev(dum),
"no ep configured for urb %p\n",
urb);
- maybe_set_status (urb, -EPROTO);
+ status = -EPROTO;
goto return_urb;
}
@@ -1289,7 +1288,7 @@ restart:
/* NOTE: must not be iso! */
dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n",
ep->ep.name, urb);
- maybe_set_status (urb, -EPIPE);
+ status = -EPIPE;
goto return_urb;
}
/* FIXME make sure both ends agree on maxpacket */
@@ -1307,7 +1306,7 @@ restart:
w_value = le16_to_cpu(setup.wValue);
if (le16_to_cpu(setup.wLength) !=
urb->transfer_buffer_length) {
- maybe_set_status (urb, -EOVERFLOW);
+ status = -EOVERFLOW;
goto return_urb;
}
@@ -1337,7 +1336,7 @@ restart:
if (setup.bRequestType != Dev_Request)
break;
dum->address = w_value;
- maybe_set_status (urb, 0);
+ status = 0;
dev_dbg (udc_dev(dum), "set_address = %d\n",
w_value);
value = 0;
@@ -1364,7 +1363,7 @@ restart:
if (value == 0) {
dum->devstatus |=
(1 << w_value);
- maybe_set_status (urb, 0);
+ status = 0;
}
} else if (setup.bRequestType == Ep_Request) {
@@ -1376,7 +1375,7 @@ restart:
}
ep2->halted = 1;
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
}
break;
case USB_REQ_CLEAR_FEATURE:
@@ -1386,7 +1385,7 @@ restart:
dum->devstatus &= ~(1 <<
USB_DEVICE_REMOTE_WAKEUP);
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
break;
default:
value = -EOPNOTSUPP;
@@ -1401,7 +1400,7 @@ restart:
}
ep2->halted = 0;
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
}
break;
case USB_REQ_GET_STATUS:
@@ -1438,7 +1437,7 @@ restart:
urb->actual_length = min (2,
urb->transfer_buffer_length);
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
}
break;
}
@@ -1465,7 +1464,7 @@ restart:
dev_dbg (udc_dev(dum),
"setup --> %d\n",
value);
- maybe_set_status (urb, -EPIPE);
+ status = -EPIPE;
urb->actual_length = 0;
}
@@ -1482,7 +1481,7 @@ restart:
* report random errors, to debug drivers.
*/
limit = max (limit, periodic_bytes (dum, ep));
- maybe_set_status (urb, -ENOSYS);
+ status = -ENOSYS;
break;
case PIPE_INTERRUPT:
@@ -1496,23 +1495,23 @@ restart:
default:
treat_control_like_bulk:
ep->last_io = jiffies;
- total = transfer (dum, urb, ep, limit);
+ total = transfer(dum, urb, ep, limit, &status);
break;
}
/* incomplete transfer? */
- if (urb->status == -EINPROGRESS)
+ if (status == -EINPROGRESS)
continue;
return_urb:
- urb->hcpriv = NULL;
list_del (&urbp->urbp_list);
kfree (urbp);
if (ep)
ep->already_seen = ep->setup_stage = 0;
+ usb_hcd_unlink_urb_from_ep(dummy_to_hcd(dum), urb);
spin_unlock (&dum->lock);
- usb_hcd_giveback_urb (dummy_to_hcd(dum), urb);
+ usb_hcd_giveback_urb(dummy_to_hcd(dum), urb, status);
spin_lock (&dum->lock);
goto restart;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 3aa46cfa66ba..f9d07108bc30 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -28,7 +28,7 @@
#include <linux/string.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include "gadget_chips.h"
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index f70055473a00..9e732bff9df0 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -19,40 +19,18 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/* #define VERBOSE_DEBUG */
-// #define DEBUG 1
-// #define VERBOSE
-
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
#include <linux/utsname.h>
#include <linux/device.h>
-#include <linux/moduleparam.h>
#include <linux/ctype.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/unaligned.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/usb/ch9.h>
#include <linux/usb/cdc.h>
-#include <linux/usb_gadget.h>
-
-#include <linux/random.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
+#include <linux/usb/gadget.h>
#include "gadget_chips.h"
@@ -356,15 +334,15 @@ module_param (qmult, uint, S_IRUGO|S_IWUSR);
#define qlen(gadget) \
(DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
-/* also defer IRQs on highspeed TX */
-#define TX_DELAY qmult
-
static inline int BITRATE(struct usb_gadget *g)
{
return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS;
}
#else /* full speed (low speed doesn't do bulk) */
+
+#define qmult 1
+
#define DEVSPEED USB_SPEED_FULL
#define qlen(gadget) DEFAULT_QLEN
@@ -390,7 +368,7 @@ static inline int BITRATE(struct usb_gadget *g)
do { } while (0)
#endif /* DEBUG */
-#ifdef VERBOSE
+#ifdef VERBOSE_DEBUG
#define VDEBUG DEBUG
#else
#define VDEBUG(dev,fmt,args...) \
@@ -830,8 +808,6 @@ static const struct usb_descriptor_header *fs_rndis_function [] = {
};
#endif
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
/*
* usb 2.0 devices need to expose both high speed and full speed
* descriptors, unless they only run at full speed.
@@ -934,18 +910,15 @@ static const struct usb_descriptor_header *hs_rndis_function [] = {
/* maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-
-#else
-
-/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g,hs,fs) (((void)(g)), (fs))
-
-static inline void __init hs_subset_descriptors(void)
+static inline struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+ struct usb_endpoint_descriptor *fs)
{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
}
-#endif /* !CONFIG_USB_GADGET_DUALSPEED */
/*-------------------------------------------------------------------------*/
@@ -989,22 +962,19 @@ static struct usb_gadget_strings stringtab = {
* complications: class descriptors, and an altsetting.
*/
static int
-config_buf (enum usb_device_speed speed,
- u8 *buf, u8 type,
- unsigned index, int is_otg)
+config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
{
int len;
const struct usb_config_descriptor *config;
const struct usb_descriptor_header **function;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- int hs = (speed == USB_SPEED_HIGH);
+ int hs = 0;
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- hs = !hs;
+ if (gadget_is_dualspeed(g)) {
+ hs = (g->speed == USB_SPEED_HIGH);
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ }
#define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
-#else
-#define which_fn(t) (fs_ ## t ## _function)
-#endif
if (index >= device_desc.bNumConfigurations)
return -EINVAL;
@@ -1217,7 +1187,7 @@ eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags)
if (number)
eth_reset_config (dev);
usb_gadget_vbus_draw(dev->gadget,
- dev->gadget->is_otg ? 8 : 100);
+ gadget_is_otg(dev->gadget) ? 8 : 100);
} else {
char *speed;
unsigned power;
@@ -1399,24 +1369,22 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
value = min (wLength, (u16) sizeof device_desc);
memcpy (req->buf, &device_desc, value);
break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
value = min (wLength, (u16) sizeof dev_qualifier);
memcpy (req->buf, &dev_qualifier, value);
break;
case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
// FALLTHROUGH
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
case USB_DT_CONFIG:
- value = config_buf (gadget->speed, req->buf,
+ value = config_buf(gadget, req->buf,
wValue >> 8,
wValue & 0xff,
- gadget->is_otg);
+ gadget_is_otg(gadget));
if (value >= 0)
value = min (wLength, (u16) value);
break;
@@ -1585,12 +1553,12 @@ done_set_intf:
&& rndis_control_intf.bInterfaceNumber
== wIndex) {
u8 *buf;
+ u32 n;
/* return the result */
- buf = rndis_get_next_response (dev->rndis_config,
- &value);
+ buf = rndis_get_next_response(dev->rndis_config, &n);
if (buf) {
- memcpy (req->buf, buf, value);
+ memcpy(req->buf, buf, n);
req->complete = rndis_response_complete;
rndis_free_response(dev->rndis_config, buf);
}
@@ -1989,8 +1957,20 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
}
spin_lock_irqsave(&dev->req_lock, flags);
+ /*
+ * this freelist can be empty if an interrupt triggered disconnect()
+ * and reconfigured the gadget (shutting down this queue) after the
+ * network stack decided to xmit but before we got the spinlock.
+ */
+ if (list_empty(&dev->tx_reqs)) {
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+ return 1;
+ }
+
req = container_of (dev->tx_reqs.next, struct usb_request, list);
list_del (&req->list);
+
+ /* temporarily stop TX queue when the freelist empties */
if (list_empty (&dev->tx_reqs))
netif_stop_queue (net);
spin_unlock_irqrestore(&dev->req_lock, flags);
@@ -2026,12 +2006,11 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
req->length = length;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
/* throttle highspeed IRQ rate back slightly */
- req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
- ? ((atomic_read (&dev->tx_qlen) % TX_DELAY) != 0)
- : 0;
-#endif
+ if (gadget_is_dualspeed(dev->gadget))
+ req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
+ ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
+ : 0;
retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
switch (retval) {
@@ -2188,8 +2167,7 @@ static int eth_stop (struct net_device *net)
}
if (rndis_active(dev)) {
- rndis_set_param_medium (dev->rndis_config,
- NDIS_MEDIUM_802_3, 0);
+ rndis_set_param_medium(dev->rndis_config, NDIS_MEDIUM_802_3, 0);
(void) rndis_signal_disconnect (dev->rndis_config);
}
@@ -2443,26 +2421,28 @@ autoconf_fail:
if (rndis)
device_desc.bNumConfigurations = 2;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- if (rndis)
- dev_qualifier.bNumConfigurations = 2;
- else if (!cdc)
- dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ if (gadget_is_dualspeed(gadget)) {
+ if (rndis)
+ dev_qualifier.bNumConfigurations = 2;
+ else if (!cdc)
+ dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
- /* assumes ep0 uses the same value for both speeds ... */
- dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+ /* assumes ep0 uses the same value for both speeds ... */
+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
- /* and that all endpoints are dual-speed */
- hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
- hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
+ /* and that all endpoints are dual-speed */
+ hs_source_desc.bEndpointAddress =
+ fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress =
+ fs_sink_desc.bEndpointAddress;
#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- if (status_ep)
- hs_status_desc.bEndpointAddress =
- fs_status_desc.bEndpointAddress;
+ if (status_ep)
+ hs_status_desc.bEndpointAddress =
+ fs_status_desc.bEndpointAddress;
#endif
-#endif /* DUALSPEED */
+ }
- if (gadget->is_otg) {
+ if (gadget_is_otg(gadget)) {
otg_descriptor.bmAttributes |= USB_OTG_HNP,
eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
eth_config.bMaxPower = 4;
@@ -2598,12 +2578,11 @@ fail0:
if (rndis_set_param_dev (dev->rndis_config, dev->net,
&dev->stats, &dev->cdc_filter))
goto fail0;
- if (rndis_set_param_vendor (dev->rndis_config, vendorID,
- manufacturer))
+ if (rndis_set_param_vendor(dev->rndis_config, vendorID,
+ manufacturer))
goto fail0;
- if (rndis_set_param_medium (dev->rndis_config,
- NDIS_MEDIUM_802_3,
- 0))
+ if (rndis_set_param_medium(dev->rndis_config,
+ NDIS_MEDIUM_802_3, 0))
goto fail0;
INFO (dev, "RNDIS ready\n");
}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 965ad7bec7b7..73726c570a6e 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -1,7 +1,7 @@
/*
* file_storage.c -- File-backed USB Storage Gadget, for USB development
*
- * Copyright (C) 2003-2005 Alan Stern
+ * Copyright (C) 2003-2007 Alan Stern
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -217,17 +217,11 @@
*/
-#undef DEBUG
-#undef VERBOSE
-#undef DUMP_MSGS
-
+/* #define VERBOSE_DEBUG */
+/* #define DUMP_MSGS */
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <linux/bitops.h>
#include <linux/blkdev.h>
-#include <linux/compiler.h>
#include <linux/completion.h>
#include <linux/dcache.h>
#include <linux/delay.h>
@@ -235,18 +229,10 @@
#include <linux/fcntl.h>
#include <linux/file.h>
#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/kthread.h>
#include <linux/limits.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pagemap.h>
#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
@@ -254,7 +240,7 @@
#include <linux/utsname.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include "gadget_chips.h"
@@ -263,7 +249,7 @@
#define DRIVER_DESC "File-backed Storage Gadget"
#define DRIVER_NAME "g_file_storage"
-#define DRIVER_VERSION "28 November 2005"
+#define DRIVER_VERSION "7 August 2007"
static const char longname[] = DRIVER_DESC;
static const char shortname[] = DRIVER_NAME;
@@ -289,57 +275,48 @@ MODULE_LICENSE("Dual BSD/GPL");
/*-------------------------------------------------------------------------*/
-#define xprintk(f,level,fmt,args...) \
- dev_printk(level , &(f)->gadget->dev , fmt , ## args)
-#define yprintk(l,level,fmt,args...) \
- dev_printk(level , &(l)->dev , fmt , ## args)
-
#ifdef DEBUG
-#define DBG(fsg,fmt,args...) \
- xprintk(fsg , KERN_DEBUG , fmt , ## args)
#define LDBG(lun,fmt,args...) \
- yprintk(lun , KERN_DEBUG , fmt , ## args)
+ dev_dbg(&(lun)->dev , fmt , ## args)
#define MDBG(fmt,args...) \
printk(KERN_DEBUG DRIVER_NAME ": " fmt , ## args)
#else
-#define DBG(fsg,fmt,args...) \
- do { } while (0)
#define LDBG(lun,fmt,args...) \
do { } while (0)
#define MDBG(fmt,args...) \
do { } while (0)
-#undef VERBOSE
+#undef VERBOSE_DEBUG
#undef DUMP_MSGS
#endif /* DEBUG */
-#ifdef VERBOSE
-#define VDBG DBG
+#ifdef VERBOSE_DEBUG
#define VLDBG LDBG
#else
-#define VDBG(fsg,fmt,args...) \
- do { } while (0)
#define VLDBG(lun,fmt,args...) \
do { } while (0)
-#endif /* VERBOSE */
+#endif /* VERBOSE_DEBUG */
-#define ERROR(fsg,fmt,args...) \
- xprintk(fsg , KERN_ERR , fmt , ## args)
#define LERROR(lun,fmt,args...) \
- yprintk(lun , KERN_ERR , fmt , ## args)
-
-#define WARN(fsg,fmt,args...) \
- xprintk(fsg , KERN_WARNING , fmt , ## args)
+ dev_err(&(lun)->dev , fmt , ## args)
#define LWARN(lun,fmt,args...) \
- yprintk(lun , KERN_WARNING , fmt , ## args)
-
-#define INFO(fsg,fmt,args...) \
- xprintk(fsg , KERN_INFO , fmt , ## args)
+ dev_warn(&(lun)->dev , fmt , ## args)
#define LINFO(lun,fmt,args...) \
- yprintk(lun , KERN_INFO , fmt , ## args)
+ dev_info(&(lun)->dev , fmt , ## args)
#define MINFO(fmt,args...) \
printk(KERN_INFO DRIVER_NAME ": " fmt , ## args)
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARN(d, fmt, args...) \
+ dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->gadget->dev , fmt , ## args)
+
/*-------------------------------------------------------------------------*/
@@ -350,8 +327,8 @@ MODULE_LICENSE("Dual BSD/GPL");
static struct {
char *file[MAX_LUNS];
int ro[MAX_LUNS];
- int num_filenames;
- int num_ros;
+ unsigned int num_filenames;
+ unsigned int num_ros;
unsigned int nluns;
int removable;
@@ -578,7 +555,7 @@ struct lun {
#define backing_file_is_open(curlun) ((curlun)->filp != NULL)
-static inline struct lun *dev_to_lun(struct device *dev)
+static struct lun *dev_to_lun(struct device *dev)
{
return container_of(dev, struct lun, dev);
}
@@ -711,13 +688,13 @@ struct fsg_dev {
typedef void (*fsg_routine_t)(struct fsg_dev *);
-static int inline exception_in_progress(struct fsg_dev *fsg)
+static int exception_in_progress(struct fsg_dev *fsg)
{
return (fsg->state > FSG_STATE_IDLE);
}
/* Make bulk-out requests be divisible by the maxpacket size */
-static void inline set_bulk_out_req_length(struct fsg_dev *fsg,
+static void set_bulk_out_req_length(struct fsg_dev *fsg,
struct fsg_buffhd *bh, unsigned int length)
{
unsigned int rem;
@@ -743,50 +720,36 @@ static void close_all_backing_files(struct fsg_dev *fsg);
static void dump_msg(struct fsg_dev *fsg, const char *label,
const u8 *buf, unsigned int length)
{
- unsigned int start, num, i;
- char line[52], *p;
-
- if (length >= 512)
- return;
- DBG(fsg, "%s, length %u:\n", label, length);
-
- start = 0;
- while (length > 0) {
- num = min(length, 16u);
- p = line;
- for (i = 0; i < num; ++i) {
- if (i == 8)
- *p++ = ' ';
- sprintf(p, " %02x", buf[i]);
- p += 3;
- }
- *p = 0;
- printk(KERN_DEBUG "%6x: %s\n", start, line);
- buf += num;
- start += num;
- length -= num;
+ if (length < 512) {
+ DBG(fsg, "%s, length %u:\n", label, length);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+ 16, 1, buf, length, 0);
}
}
-static void inline dump_cdb(struct fsg_dev *fsg)
+static void dump_cdb(struct fsg_dev *fsg)
{}
#else
-static void inline dump_msg(struct fsg_dev *fsg, const char *label,
+static void dump_msg(struct fsg_dev *fsg, const char *label,
const u8 *buf, unsigned int length)
{}
-static void inline dump_cdb(struct fsg_dev *fsg)
-{
- int i;
- char cmdbuf[3*MAX_COMMAND_SIZE + 1];
+#ifdef VERBOSE_DEBUG
- for (i = 0; i < fsg->cmnd_size; ++i)
- sprintf(cmdbuf + i*3, " %02x", fsg->cmnd[i]);
- VDBG(fsg, "SCSI CDB: %s\n", cmdbuf);
+static void dump_cdb(struct fsg_dev *fsg)
+{
+ print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,
+ 16, 1, fsg->cmnd, fsg->cmnd_size, 0);
}
+#else
+
+static void dump_cdb(struct fsg_dev *fsg)
+{}
+
+#endif /* VERBOSE_DEBUG */
#endif /* DUMP_MSGS */
@@ -809,24 +772,24 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
/* Routines for unaligned data access */
-static u16 inline get_be16(u8 *buf)
+static u16 get_be16(u8 *buf)
{
return ((u16) buf[0] << 8) | ((u16) buf[1]);
}
-static u32 inline get_be32(u8 *buf)
+static u32 get_be32(u8 *buf)
{
return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) |
((u32) buf[2] << 8) | ((u32) buf[3]);
}
-static void inline put_be16(u8 *buf, u16 val)
+static void put_be16(u8 *buf, u16 val)
{
buf[0] = val >> 8;
buf[1] = val;
}
-static void inline put_be32(u8 *buf, u32 val)
+static void put_be32(u8 *buf, u32 val)
{
buf[0] = val >> 24;
buf[1] = val >> 16;
@@ -950,8 +913,6 @@ static const struct usb_descriptor_header *fs_function[] = {
#define FS_FUNCTION_PRE_EP_ENTRIES 2
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
/*
* USB 2.0 devices need to expose both high speed and full speed
* descriptors, unless they only run at full speed.
@@ -1014,14 +975,14 @@ static const struct usb_descriptor_header *hs_function[] = {
#define HS_FUNCTION_PRE_EP_ENTRIES 2
/* Maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g,fs,hs) (((g)->speed==USB_SPEED_HIGH) ? (hs) : (fs))
-
-#else
-
-/* If there's no high speed support, always use the full-speed descriptor. */
-#define ep_desc(g,fs,hs) fs
-
-#endif /* !CONFIG_USB_GADGET_DUALSPEED */
+static struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
+ struct usb_endpoint_descriptor *hs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
/* The CBI specification limits the serial string to 12 uppercase hexadecimal
@@ -1053,26 +1014,22 @@ static struct usb_gadget_strings stringtab = {
static int populate_config_buf(struct usb_gadget *gadget,
u8 *buf, u8 type, unsigned index)
{
-#ifdef CONFIG_USB_GADGET_DUALSPEED
enum usb_device_speed speed = gadget->speed;
-#endif
int len;
const struct usb_descriptor_header **function;
if (index > 0)
return -EINVAL;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- if (type == USB_DT_OTHER_SPEED_CONFIG)
+ if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
- if (speed == USB_SPEED_HIGH)
+ if (gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH)
function = hs_function;
else
-#endif
function = fs_function;
/* for now, don't advertise srp-only devices */
- if (!gadget->is_otg)
+ if (!gadget_is_otg(gadget))
function++;
len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
@@ -1394,10 +1351,9 @@ static int standard_setup_req(struct fsg_dev *fsg,
value = sizeof device_desc;
memcpy(req->buf, &device_desc, value);
break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
VDBG(fsg, "get device qualifier\n");
- if (!fsg->gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(fsg->gadget))
break;
value = sizeof dev_qualifier;
memcpy(req->buf, &dev_qualifier, value);
@@ -1405,15 +1361,12 @@ static int standard_setup_req(struct fsg_dev *fsg,
case USB_DT_OTHER_SPEED_CONFIG:
VDBG(fsg, "get other-speed config descriptor\n");
- if (!fsg->gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(fsg->gadget))
break;
goto get_config;
-#endif
case USB_DT_CONFIG:
VDBG(fsg, "get configuration descriptor\n");
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- get_config:
-#endif
+get_config:
value = populate_config_buf(fsg->gadget,
req->buf,
w_value >> 8,
@@ -1646,7 +1599,8 @@ static int do_read(struct fsg_dev *fsg)
/* Wait for the next buffer to become available */
bh = fsg->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
}
@@ -1885,7 +1839,8 @@ static int do_write(struct fsg_dev *fsg)
}
/* Wait for something to happen */
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
}
@@ -2369,7 +2324,8 @@ static int pad_with_zeros(struct fsg_dev *fsg)
/* Wait for the next buffer to be free */
while (bh->state != BUF_STATE_EMPTY) {
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
}
@@ -2429,7 +2385,8 @@ static int throw_away_data(struct fsg_dev *fsg)
}
/* Otherwise wait for something to happen */
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
}
return 0;
@@ -2551,7 +2508,8 @@ static int send_status(struct fsg_dev *fsg)
/* Wait for the next buffer to become available */
bh = fsg->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
}
@@ -2771,9 +2729,10 @@ static int do_scsi_command(struct fsg_dev *fsg)
/* Wait for the next buffer to become available for data or status */
bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
- }
+ }
fsg->phase_error = 0;
fsg->short_packet_received = 0;
@@ -3005,7 +2964,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
/* Is the CBW meaningful? */
if (cbw->Lun >= MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
- cbw->Length < 6 || cbw->Length > MAX_COMMAND_SIZE) {
+ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
"cmdlen %u\n",
cbw->Lun, cbw->Flags, cbw->Length);
@@ -3045,9 +3004,10 @@ static int get_next_command(struct fsg_dev *fsg)
/* Wait for the next buffer to become available */
bh = fsg->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
- }
+ }
/* Queue a request to read a Bulk-only CBW */
set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
@@ -3061,9 +3021,10 @@ static int get_next_command(struct fsg_dev *fsg)
/* Wait for the CBW to arrive */
while (bh->state != BUF_STATE_FULL) {
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
- }
+ }
smp_rmb();
rc = received_cbw(fsg, bh);
bh->state = BUF_STATE_EMPTY;
@@ -3072,9 +3033,10 @@ static int get_next_command(struct fsg_dev *fsg)
/* Wait for the next command to arrive */
while (fsg->cbbuf_cmnd_size == 0) {
- if ((rc = sleep_thread(fsg)) != 0)
+ rc = sleep_thread(fsg);
+ if (rc)
return rc;
- }
+ }
/* Is the previous status interrupt request still busy?
* The host is allowed to skip reading the status,
@@ -3595,7 +3557,8 @@ static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *
return sprintf(buf, "%d\n", curlun->ro);
}
-static ssize_t show_file(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_file(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct lun *curlun = dev_to_lun(dev);
struct fsg_dev *fsg = dev_get_drvdata(dev);
@@ -3604,8 +3567,8 @@ static ssize_t show_file(struct device *dev, struct device_attribute *attr, char
down_read(&fsg->filesem);
if (backing_file_is_open(curlun)) { // Get the complete pathname
- p = d_path(curlun->filp->f_path.dentry, curlun->filp->f_path.mnt,
- buf, PAGE_SIZE - 1);
+ p = d_path(curlun->filp->f_path.dentry,
+ curlun->filp->f_path.mnt, buf, PAGE_SIZE - 1);
if (IS_ERR(p))
rc = PTR_ERR(p);
else {
@@ -3623,7 +3586,8 @@ static ssize_t show_file(struct device *dev, struct device_attribute *attr, char
}
-static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_ro(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
ssize_t rc = count;
struct lun *curlun = dev_to_lun(dev);
@@ -3647,7 +3611,8 @@ static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const
return rc;
}
-static ssize_t store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_file(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct lun *curlun = dev_to_lun(dev);
struct fsg_dev *fsg = dev_get_drvdata(dev);
@@ -3859,7 +3824,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
/* Find out how many LUNs there should be */
i = mod_data.nluns;
if (i == 0)
- i = max(mod_data.num_filenames, 1);
+ i = max(mod_data.num_filenames, 1u);
if (i > MAX_LUNS) {
ERROR(fsg, "invalid number of LUNs: %d\n", i);
rc = -EINVAL;
@@ -3944,21 +3909,23 @@ static int __init fsg_bind(struct usb_gadget *gadget)
intf_desc.bInterfaceProtocol = mod_data.transport_type;
fs_function[i + FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
+ if (gadget_is_dualspeed(gadget)) {
+ hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
- /* Assume ep0 uses the same maxpacket value for both speeds */
- dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
+ /* Assume ep0 uses the same maxpacket value for both speeds */
+ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
- /* Assume that all endpoint addresses are the same for both speeds */
- hs_bulk_in_desc.bEndpointAddress = fs_bulk_in_desc.bEndpointAddress;
- hs_bulk_out_desc.bEndpointAddress = fs_bulk_out_desc.bEndpointAddress;
- hs_intr_in_desc.bEndpointAddress = fs_intr_in_desc.bEndpointAddress;
-#endif
+ /* Assume endpoint addresses are the same for both speeds */
+ hs_bulk_in_desc.bEndpointAddress =
+ fs_bulk_in_desc.bEndpointAddress;
+ hs_bulk_out_desc.bEndpointAddress =
+ fs_bulk_out_desc.bEndpointAddress;
+ hs_intr_in_desc.bEndpointAddress =
+ fs_intr_in_desc.bEndpointAddress;
+ }
- if (gadget->is_otg) {
+ if (gadget_is_otg(gadget))
otg_desc.bmAttributes |= USB_OTG_HNP;
- }
rc = -ENOMEM;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index d57bcfbc08a5..9bb7f64a85cd 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -35,7 +35,7 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
@@ -1090,14 +1090,11 @@ static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
*/
static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
{
-#ifdef CONFIG_USB_OTG
struct fsl_udc *udc;
udc = container_of(gadget, struct fsl_udc, gadget);
-
if (udc->transceiver)
return otg_set_power(udc->transceiver, mA);
-#endif
return -ENOTSUPP;
}
@@ -1120,7 +1117,7 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}
-/* defined in usb_gadget.h */
+/* defined in gadget.h */
static struct usb_gadget_ops fsl_gadget_ops = {
.get_frame = fsl_get_frame,
.wakeup = fsl_wakeup,
@@ -1321,7 +1318,7 @@ static void setup_received_irq(struct fsl_udc *udc,
| USB_TYPE_STANDARD)) {
/* Note: The driver has not include OTG support yet.
* This will be set when OTG support is added */
- if (!udc->gadget.is_otg)
+ if (!gadget_is_otg(udc->gadget))
break;
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
udc->gadget.b_hnp_enable = 1;
@@ -1330,6 +1327,8 @@ static void setup_received_irq(struct fsl_udc *udc,
else if (setup->bRequest ==
USB_DEVICE_A_ALT_HNP_SUPPORT)
udc->gadget.a_alt_hnp_support = 1;
+ else
+ break;
rc = 0;
} else
break;
@@ -1840,10 +1839,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
if (!driver || driver != udc_controller->driver || !driver->unbind)
return -EINVAL;
-#ifdef CONFIG_USB_OTG
if (udc_controller->transceiver)
(void)otg_set_peripheral(udc_controller->transceiver, 0);
-#endif
/* stop DR, disable intr */
dr_controller_stop(udc_controller);
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 1c5aa49d7432..0689189550bc 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -18,17 +18,11 @@
* http://www.usb.org/developers/devclass_docs/midi10.pdf
*/
-#define DEBUG 1
-// #define VERBOSE
+/* #define VERBOSE_DEBUG */
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/utsname.h>
#include <linux/device.h>
-#include <linux/moduleparam.h>
#include <sound/driver.h>
#include <sound/core.h>
@@ -36,7 +30,7 @@
#include <sound/rawmidi.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <linux/usb/audio.h>
#include <linux/usb/midi.h>
@@ -139,30 +133,16 @@ struct gmidi_device {
static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req);
-#define xprintk(d,level,fmt,args...) \
- dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG DBG
-#else
-#define VDBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARN(d, fmt, args...) \
+ dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->gadget->dev , fmt , ## args)
static unsigned buflen = 256;
@@ -425,7 +405,7 @@ static int config_buf(struct usb_gadget *gadget,
return len;
}
-static struct usb_request* alloc_ep_req(struct usb_ep *ep, unsigned length)
+static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
{
struct usb_request *req;
@@ -455,7 +435,7 @@ static const uint8_t gmidi_cin_length[] = {
* Receives a chunk of MIDI data.
*/
static void gmidi_read_data(struct usb_ep *ep, int cable,
- uint8_t* data, int length)
+ uint8_t *data, int length)
{
struct gmidi_device *dev = ep->driver_data;
/* cable is ignored, because for now we only have one. */
@@ -541,7 +521,7 @@ static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags)
{
int err = 0;
struct usb_request *req;
- struct usb_ep* ep;
+ struct usb_ep *ep;
unsigned i;
err = usb_ep_enable(dev->in_ep, &bulk_in_desc);
@@ -628,7 +608,7 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
if (gadget_is_sa1100(gadget) && dev->config) {
/* tx fifo is full, but we can't clear it...*/
- INFO(dev, "can't change configurations\n");
+ ERROR(dev, "can't change configurations\n");
return -ESPIPE;
}
gmidi_reset_config(dev);
@@ -843,7 +823,7 @@ static void gmidi_disconnect(struct usb_gadget *gadget)
static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget)
{
struct gmidi_device *dev = get_gadget_data(gadget);
- struct snd_card* card;
+ struct snd_card *card;
DBG(dev, "unbind\n");
@@ -867,12 +847,12 @@ static int gmidi_snd_free(struct snd_device *device)
return 0;
}
-static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0,
+static void gmidi_transmit_packet(struct usb_request *req, uint8_t p0,
uint8_t p1, uint8_t p2, uint8_t p3)
{
unsigned length = req->length;
+ u8 *buf = (u8 *)req->buf + length;
- uint8_t* buf = (uint8_t*)req->buf + length;
buf[0] = p0;
buf[1] = p1;
buf[2] = p2;
@@ -883,8 +863,8 @@ static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0,
/*
* Converts MIDI commands to USB MIDI packets.
*/
-static void gmidi_transmit_byte(struct usb_request* req,
- struct gmidi_in_port* port, uint8_t b)
+static void gmidi_transmit_byte(struct usb_request *req,
+ struct gmidi_in_port *port, uint8_t b)
{
uint8_t p0 = port->cable;
@@ -981,10 +961,10 @@ static void gmidi_transmit_byte(struct usb_request* req,
}
}
-static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req)
+static void gmidi_transmit(struct gmidi_device *dev, struct usb_request *req)
{
- struct usb_ep* ep = dev->in_ep;
- struct gmidi_in_port* port = &dev->in_port;
+ struct usb_ep *ep = dev->in_ep;
+ struct gmidi_in_port *port = &dev->in_port;
if (!ep) {
return;
@@ -1020,14 +1000,14 @@ static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req)
static void gmidi_in_tasklet(unsigned long data)
{
- struct gmidi_device* dev = (struct gmidi_device*)data;
+ struct gmidi_device *dev = (struct gmidi_device *)data;
gmidi_transmit(dev, NULL);
}
static int gmidi_in_open(struct snd_rawmidi_substream *substream)
{
- struct gmidi_device* dev = substream->rmidi->private_data;
+ struct gmidi_device *dev = substream->rmidi->private_data;
VDBG(dev, "gmidi_in_open\n");
dev->in_substream = substream;
@@ -1037,13 +1017,15 @@ static int gmidi_in_open(struct snd_rawmidi_substream *substream)
static int gmidi_in_close(struct snd_rawmidi_substream *substream)
{
+ struct gmidi_device *dev = substream->rmidi->private_data;
+
VDBG(dev, "gmidi_in_close\n");
return 0;
}
static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
{
- struct gmidi_device* dev = substream->rmidi->private_data;
+ struct gmidi_device *dev = substream->rmidi->private_data;
VDBG(dev, "gmidi_in_trigger %d\n", up);
dev->in_port.active = up;
@@ -1054,7 +1036,7 @@ static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
static int gmidi_out_open(struct snd_rawmidi_substream *substream)
{
- struct gmidi_device* dev = substream->rmidi->private_data;
+ struct gmidi_device *dev = substream->rmidi->private_data;
VDBG(dev, "gmidi_out_open\n");
dev->out_substream = substream;
@@ -1063,13 +1045,15 @@ static int gmidi_out_open(struct snd_rawmidi_substream *substream)
static int gmidi_out_close(struct snd_rawmidi_substream *substream)
{
+ struct gmidi_device *dev = substream->rmidi->private_data;
+
VDBG(dev, "gmidi_out_close\n");
return 0;
}
static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up)
{
- struct gmidi_device* dev = substream->rmidi->private_data;
+ struct gmidi_device *dev = substream->rmidi->private_data;
VDBG(dev, "gmidi_out_trigger %d\n", up);
if (up) {
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 349b8166f34a..2ec9d196a8cf 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -37,7 +37,7 @@
#include <linux/proc_fs.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 173004f60fea..47ef8bd58a00 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -20,8 +20,7 @@
*/
-// #define DEBUG /* data to help fault diagnosis */
-// #define VERBOSE /* extra debug messages (success too) */
+/* #define VERBOSE_DEBUG */
#include <linux/init.h>
#include <linux/module.h>
@@ -38,7 +37,7 @@
#include <linux/moduleparam.h>
#include <linux/usb/gadgetfs.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
/*
@@ -253,7 +252,7 @@ static const char *CHIP;
do { } while (0)
#endif /* DEBUG */
-#ifdef VERBOSE
+#ifdef VERBOSE_DEBUG
#define VDEBUG DBG
#else
#define VDEBUG(dev,fmt,args...) \
@@ -1010,11 +1009,12 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
/* assume that was SET_CONFIGURATION */
if (dev->current_config) {
unsigned power;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- if (dev->gadget->speed == USB_SPEED_HIGH)
+
+ if (gadget_is_dualspeed(dev->gadget)
+ && (dev->gadget->speed
+ == USB_SPEED_HIGH))
power = dev->hs_config->bMaxPower;
else
-#endif
power = dev->config->bMaxPower;
usb_gadget_vbus_draw(dev->gadget, 2 * power);
}
@@ -1355,24 +1355,21 @@ static int
config_buf (struct dev_data *dev, u8 type, unsigned index)
{
int len;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- int hs;
-#endif
+ int hs = 0;
/* only one configuration */
if (index > 0)
return -EINVAL;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- hs = (dev->gadget->speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- hs = !hs;
+ if (gadget_is_dualspeed(dev->gadget)) {
+ hs = (dev->gadget->speed == USB_SPEED_HIGH);
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ }
if (hs) {
dev->req->buf = dev->hs_config;
len = le16_to_cpu(dev->hs_config->wTotalLength);
- } else
-#endif
- {
+ } else {
dev->req->buf = dev->config;
len = le16_to_cpu(dev->config->wTotalLength);
}
@@ -1393,13 +1390,13 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
spin_lock (&dev->lock);
dev->setup_abort = 0;
if (dev->state == STATE_DEV_UNCONNECTED) {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == NULL) {
+ if (gadget_is_dualspeed(gadget)
+ && gadget->speed == USB_SPEED_HIGH
+ && dev->hs_config == NULL) {
spin_unlock(&dev->lock);
ERROR (dev, "no high speed config??\n");
return -EINVAL;
}
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
dev->state = STATE_DEV_CONNECTED;
dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
@@ -1469,13 +1466,12 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
// user mode expected to disable endpoints
} else {
u8 config, power;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- if (gadget->speed == USB_SPEED_HIGH) {
+
+ if (gadget_is_dualspeed(gadget)
+ && gadget->speed == USB_SPEED_HIGH) {
config = dev->hs_config->bConfigurationValue;
power = dev->hs_config->bMaxPower;
- } else
-#endif
- {
+ } else {
config = dev->config->bConfigurationValue;
power = dev->config->bMaxPower;
}
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
index b3fe197e1eeb..1ecfd6366b9a 100644
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ b/drivers/usb/gadget/lh7a40x_udc.h
@@ -50,7 +50,7 @@
#include <asm/hardware.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
/*
* Memory map
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 4b27d12f049d..ebc5536aa271 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -27,7 +27,7 @@
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include "m66592-udc.h"
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index c3d364ecd4f8..d5d473f8144b 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -62,7 +62,7 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 9b0f0925dddf..87c4f50dfb61 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -38,7 +38,7 @@
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
@@ -1241,19 +1241,15 @@ static void pullup_enable(struct omap_udc *udc)
udc->gadget.dev.parent->power.power_state = PMSG_ON;
udc->gadget.dev.power.power_state = PMSG_ON;
UDC_SYSCON1_REG |= UDC_PULLUP_EN;
-#ifndef CONFIG_USB_OTG
- if (!cpu_is_omap15xx())
+ if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
OTG_CTRL_REG |= OTG_BSESSVLD;
-#endif
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
}
static void pullup_disable(struct omap_udc *udc)
{
-#ifndef CONFIG_USB_OTG
- if (!cpu_is_omap15xx())
+ if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
OTG_CTRL_REG &= ~OTG_BSESSVLD;
-#endif
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
}
@@ -1390,7 +1386,7 @@ static void update_otg(struct omap_udc *udc)
{
u16 devstat;
- if (!udc->gadget.is_otg)
+ if (!gadget_is_otg(udc->gadget))
return;
if (OTG_CTRL_REG & OTG_ID)
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 1407ad1c8128..3e715082de36 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -54,7 +54,7 @@
#include <asm/hardware.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/mach/udc_pxa2xx.h>
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 0be80c635c48..e3e90f8a75e7 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -42,7 +42,7 @@
#include <linux/seq_file.h>
#include <linux/usb.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index ce4d2e09633d..f5738eb8e765 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -17,34 +17,15 @@
*
*/
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
#include <linux/utsname.h>
-#include <linux/wait.h>
-#include <linux/proc_fs.h>
#include <linux/device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/mutex.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-#include <asm/uaccess.h>
#include <linux/usb/ch9.h>
#include <linux/usb/cdc.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include "gadget_chips.h"
@@ -89,30 +70,29 @@
#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY
#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS
-/* select highspeed/fullspeed, hiding highspeed if not configured */
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-#define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
-#else
-#define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
+/* maxpacket and other transfer characteristics vary by speed. */
+static inline struct usb_endpoint_descriptor *
+choose_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+ struct usb_endpoint_descriptor *fs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
+
/* debug settings */
-#ifdef GS_DEBUG
+#ifdef DEBUG
static int debug = 1;
+#else
+#define debug 0
+#endif
#define gs_debug(format, arg...) \
do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
#define gs_debug_level(level, format, arg...) \
do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
-#else
-
-#define gs_debug(format, arg...) \
- do { } while(0)
-#define gs_debug_level(level, format, arg...) \
- do { } while(0)
-
-#endif /* GS_DEBUG */
/* Thanks to NetChip Technologies for donating this product ID.
*
@@ -147,10 +127,10 @@ struct gs_req_entry {
/* the port structure holds info for each port, one for each minor number */
struct gs_port {
- struct gs_dev *port_dev; /* pointer to device struct */
+ struct gs_dev *port_dev; /* pointer to device struct */
struct tty_struct *port_tty; /* pointer to tty struct */
spinlock_t port_lock;
- int port_num;
+ int port_num;
int port_open_count;
int port_in_use; /* open/close in progress */
wait_queue_head_t port_write_wait;/* waiting to write */
@@ -188,7 +168,7 @@ static void __exit gs_module_exit(void);
/* tty driver */
static int gs_open(struct tty_struct *tty, struct file *file);
static void gs_close(struct tty_struct *tty, struct file *file);
-static int gs_write(struct tty_struct *tty,
+static int gs_write(struct tty_struct *tty,
const unsigned char *buf, int count);
static void gs_put_char(struct tty_struct *tty, unsigned char ch);
static void gs_flush_chars(struct tty_struct *tty);
@@ -222,7 +202,7 @@ static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
static void gs_disconnect(struct usb_gadget *gadget);
static int gs_set_config(struct gs_dev *dev, unsigned config);
static void gs_reset_config(struct gs_dev *dev);
-static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
+static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
u8 type, unsigned int index, int is_otg);
static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
@@ -415,18 +395,18 @@ static const struct usb_cdc_header_desc gs_header_desc = {
};
static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
- .bLength = sizeof(gs_call_mgmt_descriptor),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
- .bmCapabilities = 0,
- .bDataInterface = 1, /* index of data interface */
+ .bLength = sizeof(gs_call_mgmt_descriptor),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
+ .bmCapabilities = 0,
+ .bDataInterface = 1, /* index of data interface */
};
static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
- .bLength = sizeof(gs_acm_descriptor),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ACM_TYPE,
- .bmCapabilities = 0,
+ .bLength = sizeof(gs_acm_descriptor),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ACM_TYPE,
+ .bmCapabilities = 0,
};
static const struct usb_cdc_union_desc gs_union_desc = {
@@ -436,7 +416,7 @@ static const struct usb_cdc_union_desc gs_union_desc = {
.bMasterInterface0 = 0, /* index of control interface */
.bSlaveInterface0 = 1, /* index of data interface */
};
-
+
static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -482,7 +462,6 @@ static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
NULL,
};
-#ifdef CONFIG_USB_GADGET_DUALSPEED
static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -536,15 +515,13 @@ static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
NULL,
};
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
-
/* Module */
MODULE_DESCRIPTION(GS_LONG_NAME);
MODULE_AUTHOR("Al Borchers");
MODULE_LICENSE("GPL");
-#ifdef GS_DEBUG
+#ifdef DEBUG
module_param(debug, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
#endif
@@ -915,7 +892,8 @@ static void gs_put_char(struct tty_struct *tty, unsigned char ch)
return;
}
- gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
+ gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p\n",
+ port->port_num, tty, ch, __builtin_return_address(0));
spin_lock_irqsave(&port->port_lock, flags);
@@ -1116,7 +1094,11 @@ static int gs_send(struct gs_dev *dev)
len = gs_send_packet(dev, req->buf, ep->maxpacket);
if (len > 0) {
-gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
+ gs_debug_level(3, "gs_send: len=%d, 0x%2.2x "
+ "0x%2.2x 0x%2.2x ...\n", len,
+ *((unsigned char *)req->buf),
+ *((unsigned char *)req->buf+1),
+ *((unsigned char *)req->buf+2));
list_del(&req_entry->re_entry);
req->length = len;
spin_unlock_irqrestore(&dev->dev_lock, flags);
@@ -1269,7 +1251,7 @@ static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
switch(req->status) {
case 0:
- /* normal completion */
+ /* normal completion */
gs_recv_packet(dev, req->buf, req->actual);
requeue:
req->length = ep->maxpacket;
@@ -1406,23 +1388,24 @@ static int __init gs_bind(struct usb_gadget *gadget)
? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- gs_qualifier_desc.bDeviceClass = use_acm
- ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
- /* assume ep0 uses the same packet size for both speeds */
- gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
- /* assume endpoints are dual-speed */
- gs_highspeed_notify_desc.bEndpointAddress =
- gs_fullspeed_notify_desc.bEndpointAddress;
- gs_highspeed_in_desc.bEndpointAddress =
- gs_fullspeed_in_desc.bEndpointAddress;
- gs_highspeed_out_desc.bEndpointAddress =
- gs_fullspeed_out_desc.bEndpointAddress;
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ if (gadget_is_dualspeed(gadget)) {
+ gs_qualifier_desc.bDeviceClass = use_acm
+ ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
+ /* assume ep0 uses the same packet size for both speeds */
+ gs_qualifier_desc.bMaxPacketSize0 =
+ gs_device_desc.bMaxPacketSize0;
+ /* assume endpoints are dual-speed */
+ gs_highspeed_notify_desc.bEndpointAddress =
+ gs_fullspeed_notify_desc.bEndpointAddress;
+ gs_highspeed_in_desc.bEndpointAddress =
+ gs_fullspeed_in_desc.bEndpointAddress;
+ gs_highspeed_out_desc.bEndpointAddress =
+ gs_fullspeed_out_desc.bEndpointAddress;
+ }
usb_gadget_set_selfpowered(gadget);
- if (gadget->is_otg) {
+ if (gadget_is_otg(gadget)) {
gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -1487,6 +1470,12 @@ static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
dev->dev_ctrl_req = NULL;
}
gs_free_ports(dev);
+ if (dev->dev_notify_ep)
+ usb_ep_disable(dev->dev_notify_ep);
+ if (dev->dev_in_ep)
+ usb_ep_disable(dev->dev_in_ep);
+ if (dev->dev_out_ep)
+ usb_ep_disable(dev->dev_out_ep);
kfree(dev);
set_gadget_data(gadget, NULL);
}
@@ -1570,9 +1559,8 @@ static int gs_setup_standard(struct usb_gadget *gadget,
memcpy(req->buf, &gs_device_desc, ret);
break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
ret = min(wLength,
(u16)sizeof(struct usb_qualifier_descriptor));
@@ -1580,14 +1568,13 @@ static int gs_setup_standard(struct usb_gadget *gadget,
break;
case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
/* fall through */
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
case USB_DT_CONFIG:
- ret = gs_build_config_buf(req->buf, gadget->speed,
+ ret = gs_build_config_buf(req->buf, gadget,
wValue >> 8, wValue & 0xff,
- gadget->is_otg);
+ gadget_is_otg(gadget));
if (ret >= 0)
ret = min(wLength, (u16)ret);
break;
@@ -1827,8 +1814,7 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
if (EP_NOTIFY_NAME
&& strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
- ep_desc = GS_SPEED_SELECT(
- gadget->speed == USB_SPEED_HIGH,
+ ep_desc = choose_ep_desc(gadget,
&gs_highspeed_notify_desc,
&gs_fullspeed_notify_desc);
ret = usb_ep_enable(ep,ep_desc);
@@ -1844,9 +1830,8 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
}
else if (strcmp(ep->name, EP_IN_NAME) == 0) {
- ep_desc = GS_SPEED_SELECT(
- gadget->speed == USB_SPEED_HIGH,
- &gs_highspeed_in_desc,
+ ep_desc = choose_ep_desc(gadget,
+ &gs_highspeed_in_desc,
&gs_fullspeed_in_desc);
ret = usb_ep_enable(ep,ep_desc);
if (ret == 0) {
@@ -1861,8 +1846,7 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
}
else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
- ep_desc = GS_SPEED_SELECT(
- gadget->speed == USB_SPEED_HIGH,
+ ep_desc = choose_ep_desc(gadget,
&gs_highspeed_out_desc,
&gs_fullspeed_out_desc);
ret = usb_ep_enable(ep,ep_desc);
@@ -1981,11 +1965,11 @@ static void gs_reset_config(struct gs_dev *dev)
* Builds the config descriptors in the given buffer and returns the
* length, or a negative error number.
*/
-static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
+static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
u8 type, unsigned int index, int is_otg)
{
int len;
- int high_speed;
+ int high_speed = 0;
const struct usb_config_descriptor *config_desc;
const struct usb_descriptor_header **function;
@@ -1993,20 +1977,22 @@ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
return -EINVAL;
/* other speed switches high and full speed */
- high_speed = (speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- high_speed = !high_speed;
+ if (gadget_is_dualspeed(g)) {
+ high_speed = (g->speed == USB_SPEED_HIGH);
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ high_speed = !high_speed;
+ }
if (use_acm) {
config_desc = &gs_acm_config_desc;
- function = GS_SPEED_SELECT(high_speed,
- gs_acm_highspeed_function,
- gs_acm_fullspeed_function);
+ function = high_speed
+ ? gs_acm_highspeed_function
+ : gs_acm_fullspeed_function;
} else {
config_desc = &gs_bulk_config_desc;
- function = GS_SPEED_SELECT(high_speed,
- gs_bulk_highspeed_function,
- gs_bulk_fullspeed_function);
+ function = high_speed
+ ? gs_bulk_highspeed_function
+ : gs_bulk_fullspeed_function;
}
/* for now, don't advertise srp-only devices */
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 3459ea6c6c0b..878e428a0ec1 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/unaligned.h>
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index fcfe869acb94..fcde5d9c87df 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1,38 +1,22 @@
/*
* zero.c -- Gadget Zero, for USB development
*
- * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003-2007 David Brownell
* All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
@@ -57,40 +41,28 @@
* Many drivers will only have one configuration, letting them be much
* simpler if they also don't support high speed operation (like this
* driver does).
+ *
+ * Why is *this* driver using two configurations, rather than setting up
+ * two interfaces with different functions? To help verify that multiple
+ * configuration infrastucture is working correctly; also, so that it can
+ * work with low capability USB controllers without four bulk endpoints.
*/
-#define DEBUG 1
-// #define VERBOSE
+/* #define VERBOSE_DEBUG */
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
#include <linux/utsname.h>
#include <linux/device.h>
-#include <linux/moduleparam.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include "gadget_chips.h"
/*-------------------------------------------------------------------------*/
-#define DRIVER_VERSION "St Patrick's Day 2004"
+#define DRIVER_VERSION "Lughnasadh, 2007"
static const char shortname [] = "zero";
static const char longname [] = "Gadget Zero";
@@ -131,30 +103,16 @@ struct zero_dev {
struct timer_list resume;
};
-#define xprintk(d,level,fmt,args...) \
- dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG DBG
-#else
-#define VDBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARN(d, fmt, args...) \
+ dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->gadget->dev , fmt , ## args)
/*-------------------------------------------------------------------------*/
@@ -326,8 +284,6 @@ static const struct usb_descriptor_header *fs_loopback_function [] = {
NULL,
};
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
/*
* usb 2.0 devices need to expose both high speed and full speed
* descriptors, unless they only run at full speed.
@@ -383,17 +339,20 @@ static const struct usb_descriptor_header *hs_loopback_function [] = {
};
/* maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-
-#else
+static inline struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+ struct usb_endpoint_descriptor *fs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
-/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g,hs,fs) fs
+static char manufacturer[50];
-#endif /* !CONFIG_USB_GADGET_DUALSPEED */
+/* default serial number takes at least two packets */
+static char serial[] = "0123456789.0123456789.0123456789";
-static char manufacturer [50];
-static char serial [40];
/* static strings, in UTF-8 */
static struct usb_string strings [] = {
@@ -435,30 +394,29 @@ config_buf (struct usb_gadget *gadget,
int is_source_sink;
int len;
const struct usb_descriptor_header **function;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- int hs = (gadget->speed == USB_SPEED_HIGH);
-#endif
+ int hs = 0;
/* two configurations will always be index 0 and index 1 */
if (index > 1)
return -EINVAL;
is_source_sink = loopdefault ? (index == 1) : (index == 0);
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- hs = !hs;
+ if (gadget_is_dualspeed(gadget)) {
+ hs = (gadget->speed == USB_SPEED_HIGH);
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ }
if (hs)
function = is_source_sink
? hs_source_sink_function
: hs_loopback_function;
else
-#endif
function = is_source_sink
? fs_source_sink_function
: fs_loopback_function;
/* for now, don't advertise srp-only devices */
- if (!gadget->is_otg)
+ if (!gadget_is_otg(gadget))
function++;
len = usb_gadget_config_buf (is_source_sink
@@ -498,6 +456,19 @@ static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
/*-------------------------------------------------------------------------*/
+/*
+ * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripherals,
+ * this just sinks bulk packets OUT to the peripheral and sources them IN
+ * to the host, optionally with specific data patterns.
+ *
+ * In terms of control messaging, this supports all the standard requests
+ * plus two that support control-OUT tests.
+ *
+ * Note that because this doesn't queue more than one request at a time,
+ * some other function must be used to test queueing logic. The network
+ * link (g_ether) is probably the best option for that.
+ */
+
/* optionally require specific source/sink data patterns */
static int
@@ -534,12 +505,7 @@ check_read_data (
return 0;
}
-static void
-reinit_write_data (
- struct zero_dev *dev,
- struct usb_ep *ep,
- struct usb_request *req
-)
+static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
{
unsigned i;
u8 *buf = req->buf;
@@ -566,16 +532,16 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
switch (status) {
- case 0: /* normal completion? */
+ case 0: /* normal completion? */
if (ep == dev->out_ep) {
check_read_data (dev, ep, req);
memset (req->buf, 0x55, req->length);
} else
- reinit_write_data (dev, ep, req);
+ reinit_write_data(ep, req);
break;
/* this endpoint is normally active while we're configured */
- case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
@@ -607,8 +573,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
}
}
-static struct usb_request *
-source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
+static struct usb_request *source_sink_start_ep(struct usb_ep *ep)
{
struct usb_request *req;
int status;
@@ -621,11 +586,11 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
req->complete = source_sink_complete;
if (strcmp (ep->name, EP_IN_NAME) == 0)
- reinit_write_data (ep->driver_data, ep, req);
+ reinit_write_data(ep, req);
else
memset (req->buf, 0x55, req->length);
- status = usb_ep_queue (ep, req, gfp_flags);
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
struct zero_dev *dev = ep->driver_data;
@@ -637,8 +602,7 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
return req;
}
-static int
-set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
+static int set_source_sink_config(struct zero_dev *dev)
{
int result = 0;
struct usb_ep *ep;
@@ -653,8 +617,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
result = usb_ep_enable (ep, d);
if (result == 0) {
ep->driver_data = dev;
- if (source_sink_start_ep(ep, gfp_flags)
- != NULL) {
+ if (source_sink_start_ep(ep) != NULL) {
dev->in_ep = ep;
continue;
}
@@ -668,8 +631,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
result = usb_ep_enable (ep, d);
if (result == 0) {
ep->driver_data = dev;
- if (source_sink_start_ep(ep, gfp_flags)
- != NULL) {
+ if (source_sink_start_ep(ep) != NULL) {
dev->out_ep = ep;
continue;
}
@@ -701,7 +663,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
switch (status) {
- case 0: /* normal completion? */
+ case 0: /* normal completion? */
if (ep == dev->out_ep) {
/* loop this OUT packet back IN to the host */
req->zero = (req->actual < req->length);
@@ -735,7 +697,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
* rely on the hardware driver to clean up on disconnect or
* endpoint disable.
*/
- case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
free_ep_req (ep, req);
@@ -743,8 +705,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
}
}
-static int
-set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags)
+static int set_loopback_config(struct zero_dev *dev)
{
int result = 0;
struct usb_ep *ep;
@@ -844,8 +805,7 @@ static void zero_reset_config (struct zero_dev *dev)
* code can do, perhaps by disallowing more than one configuration or
* by limiting configuration choices (like the pxa2xx).
*/
-static int
-zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
+static int zero_set_config(struct zero_dev *dev, unsigned number)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
@@ -855,17 +815,17 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
if (gadget_is_sa1100 (gadget) && dev->config) {
/* tx fifo is full, but we can't clear it...*/
- INFO (dev, "can't change configurations\n");
+ ERROR(dev, "can't change configurations\n");
return -ESPIPE;
}
zero_reset_config (dev);
switch (number) {
case CONFIG_SOURCE_SINK:
- result = set_source_sink_config (dev, gfp_flags);
+ result = set_source_sink_config(dev);
break;
case CONFIG_LOOPBACK:
- result = set_loopback_config (dev, gfp_flags);
+ result = set_loopback_config(dev);
break;
default:
result = -EINVAL;
@@ -885,7 +845,7 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
+ default: speed = "?"; break;
}
dev->config = number;
@@ -938,19 +898,17 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
value = min (w_length, (u16) sizeof device_desc);
memcpy (req->buf, &device_desc, value);
break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
value = min (w_length, (u16) sizeof dev_qualifier);
memcpy (req->buf, &dev_qualifier, value);
break;
case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
// FALLTHROUGH
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
case USB_DT_CONFIG:
value = config_buf (gadget, req->buf,
w_value >> 8,
@@ -984,7 +942,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
else
VDBG (dev, "HNP inactive\n");
spin_lock (&dev->lock);
- value = zero_set_config (dev, w_value, GFP_ATOMIC);
+ value = zero_set_config(dev, w_value);
spin_unlock (&dev->lock);
break;
case USB_REQ_GET_CONFIGURATION:
@@ -1013,7 +971,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
* use this "reset the config" shortcut.
*/
zero_reset_config (dev);
- zero_set_config (dev, config, GFP_ATOMIC);
+ zero_set_config(dev, config);
value = 0;
}
spin_unlock (&dev->lock);
@@ -1163,7 +1121,7 @@ autoconf_fail:
}
EP_IN_NAME = ep->name;
ep->driver_data = ep; /* claim */
-
+
ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
if (!ep)
goto autoconf_fail;
@@ -1207,16 +1165,18 @@ autoconf_fail:
device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- /* assume ep0 uses the same value for both speeds ... */
- dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+ if (gadget_is_dualspeed(gadget)) {
+ /* assume ep0 uses the same value for both speeds ... */
+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
- /* and that all endpoints are dual-speed */
- hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
- hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
-#endif
+ /* and that all endpoints are dual-speed */
+ hs_source_desc.bEndpointAddress =
+ fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress =
+ fs_sink_desc.bEndpointAddress;
+ }
- if (gadget->is_otg) {
+ if (gadget_is_otg(gadget)) {
otg_descriptor.bmAttributes |= USB_OTG_HNP,
source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -1294,23 +1254,18 @@ static struct usb_gadget_driver zero_driver = {
.suspend = zero_suspend,
.resume = zero_resume,
- .driver = {
+ .driver = {
.name = (char *) shortname,
.owner = THIS_MODULE,
},
};
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("Dual BSD/GPL");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
static int __init init (void)
{
- /* a real value would likely come through some id prom
- * or module option. this one takes at least two packets.
- */
- strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial);
-
return usb_gadget_register_driver (&zero_driver);
}
module_init (init);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 565d6ef4c4cf..c978d622fa8a 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -154,6 +154,19 @@ config USB_OHCI_HCD_PCI
Enables support for PCI-bus plug-in USB controller cards.
If unsure, say Y.
+config USB_OHCI_HCD_SSB
+ bool "OHCI support for Broadcom SSB OHCI core"
+ depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
+ default n
+ ---help---
+ Support for the Sonics Silicon Backplane (SSB) attached
+ Broadcom USB OHCI core.
+
+ This device is present in some embedded devices with
+ Broadcom based SSB bus.
+
+ If unsure, say N.
+
config USB_OHCI_BIG_ENDIAN_DESC
bool
depends on USB_OHCI_HCD
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index b1d19268cb23..766ef68a0b43 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -220,10 +220,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
-#ifdef CONFIG_PM
- .hub_suspend = ehci_hub_suspend,
- .hub_resume = ehci_hub_resume,
-#endif
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 35cdba10411b..c1514442883e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -570,10 +570,18 @@ static int ehci_run (struct usb_hcd *hcd)
* are explicitly handed to companion controller(s), so no TT is
* involved with the root hub. (Except where one is integrated,
* and there's no companion controller unless maybe for USB OTG.)
+ *
+ * Turning on the CF flag will transfer ownership of all ports
+ * from the companions to the EHCI controller. If any of the
+ * companions are in the middle of a port reset at the time, it
+ * could cause trouble. Write-locking ehci_cf_port_reset_rwsem
+ * guarantees that no resets are in progress.
*/
+ down_write(&ehci_cf_port_reset_rwsem);
hcd->state = HC_STATE_RUNNING;
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+ up_write(&ehci_cf_port_reset_rwsem);
temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci_info (ehci,
@@ -719,7 +727,6 @@ dead:
*/
static int ehci_urb_enqueue (
struct usb_hcd *hcd,
- struct usb_host_endpoint *ep,
struct urb *urb,
gfp_t mem_flags
) {
@@ -734,12 +741,12 @@ static int ehci_urb_enqueue (
default:
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
return -ENOMEM;
- return submit_async (ehci, ep, urb, &qtd_list, mem_flags);
+ return submit_async(ehci, urb, &qtd_list, mem_flags);
case PIPE_INTERRUPT:
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
return -ENOMEM;
- return intr_submit (ehci, ep, urb, &qtd_list, mem_flags);
+ return intr_submit(ehci, urb, &qtd_list, mem_flags);
case PIPE_ISOCHRONOUS:
if (urb->dev->speed == USB_SPEED_HIGH)
@@ -777,13 +784,18 @@ static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
* completions normally happen asynchronously
*/
-static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct ehci_qh *qh;
unsigned long flags;
+ int rc;
spin_lock_irqsave (&ehci->lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
+
switch (usb_pipetype (urb->pipe)) {
// case PIPE_CONTROL:
// case PIPE_BULK:
@@ -838,7 +850,7 @@ static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
}
done:
spin_unlock_irqrestore (&ehci->lock, flags);
- return 0;
+ return rc;
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a7816e392a85..ad0d4965f2fb 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -58,8 +58,6 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
if (!retval)
ehci_dbg(ehci, "MWI active\n");
- ehci_port_power(ehci, 0);
-
return 0;
}
@@ -156,8 +154,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
- if (ehci_is_TDI(ehci))
- ehci_reset(ehci);
+ ehci_reset(ehci);
/* at least the Genesys GL880S needs fixup here */
temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c
index 4f99b0eb27bc..452d4b1bc859 100644
--- a/drivers/usb/host/ehci-ppc-soc.c
+++ b/drivers/usb/host/ehci-ppc-soc.c
@@ -160,10 +160,8 @@ static const struct hc_driver ehci_ppc_soc_hc_driver = {
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
-#ifdef CONFIG_PM
- .hub_suspend = ehci_hub_suspend,
- .hub_resume = ehci_hub_resume,
-#endif
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
};
static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 829fe649a981..03a6b2f4e6ed 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -47,7 +47,7 @@ static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
if (result)
return result;
- ehci_port_power(ehci, 0);
+ ehci_reset(ehci);
return result;
}
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 140bfa423e07..b10f39c047e9 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -139,63 +139,65 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
/*-------------------------------------------------------------------------*/
-static void qtd_copy_status (
+static int qtd_copy_status (
struct ehci_hcd *ehci,
struct urb *urb,
size_t length,
u32 token
)
{
+ int status = -EINPROGRESS;
+
/* count IN/OUT bytes, not SETUP (even short packets) */
if (likely (QTD_PID (token) != 2))
urb->actual_length += length - QTD_LENGTH (token);
/* don't modify error codes */
- if (unlikely (urb->status != -EINPROGRESS))
- return;
+ if (unlikely(urb->unlinked))
+ return status;
/* force cleanup after short read; not always an error */
if (unlikely (IS_SHORT_READ (token)))
- urb->status = -EREMOTEIO;
+ status = -EREMOTEIO;
/* serious "can't proceed" faults reported by the hardware */
if (token & QTD_STS_HALT) {
if (token & QTD_STS_BABBLE) {
/* FIXME "must" disable babbling device's port too */
- urb->status = -EOVERFLOW;
+ status = -EOVERFLOW;
} else if (token & QTD_STS_MMF) {
/* fs/ls interrupt xfer missed the complete-split */
- urb->status = -EPROTO;
+ status = -EPROTO;
} else if (token & QTD_STS_DBE) {
- urb->status = (QTD_PID (token) == 1) /* IN ? */
+ status = (QTD_PID (token) == 1) /* IN ? */
? -ENOSR /* hc couldn't read data */
: -ECOMM; /* hc couldn't write data */
} else if (token & QTD_STS_XACT) {
/* timeout, bad crc, wrong PID, etc; retried */
if (QTD_CERR (token))
- urb->status = -EPIPE;
+ status = -EPIPE;
else {
ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
urb->dev->devpath,
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out");
- urb->status = -EPROTO;
+ status = -EPROTO;
}
/* CERR nonzero + no errors + halt --> stall */
} else if (QTD_CERR (token))
- urb->status = -EPIPE;
+ status = -EPIPE;
else /* unknown */
- urb->status = -EPROTO;
+ status = -EPROTO;
ehci_vdbg (ehci,
"dev%d ep%d%s qtd token %08x --> status %d\n",
usb_pipedevice (urb->pipe),
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
- token, urb->status);
+ token, status);
/* if async CSPLIT failed, try cleaning out the TT buffer */
- if (urb->status != -EPIPE
+ if (status != -EPIPE
&& urb->dev->tt && !usb_pipeint (urb->pipe)
&& ((token & QTD_STS_MMF) != 0
|| QTD_CERR(token) == 0)
@@ -212,10 +214,12 @@ static void qtd_copy_status (
usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
}
}
+
+ return status;
}
static void
-ehci_urb_done (struct ehci_hcd *ehci, struct urb *urb)
+ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
__releases(ehci->lock)
__acquires(ehci->lock)
{
@@ -231,25 +235,13 @@ __acquires(ehci->lock)
qh_put (qh);
}
- spin_lock (&urb->lock);
- urb->hcpriv = NULL;
- switch (urb->status) {
- case -EINPROGRESS: /* success */
- urb->status = 0;
- default: /* fault */
- COUNT (ehci->stats.complete);
- break;
- case -EREMOTEIO: /* fault or normal */
- if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
- urb->status = 0;
- COUNT (ehci->stats.complete);
- break;
- case -ECONNRESET: /* canceled */
- case -ENOENT:
- COUNT (ehci->stats.unlink);
- break;
+ if (unlikely(urb->unlinked)) {
+ COUNT(ehci->stats.unlink);
+ } else {
+ if (likely(status == -EINPROGRESS))
+ status = 0;
+ COUNT(ehci->stats.complete);
}
- spin_unlock (&urb->lock);
#ifdef EHCI_URB_TRACE
ehci_dbg (ehci,
@@ -257,13 +249,14 @@ __acquires(ehci->lock)
__FUNCTION__, urb->dev->devpath, urb,
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
- urb->status,
+ status,
urb->actual_length, urb->transfer_buffer_length);
#endif
/* complete() can reenter this HCD */
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
spin_unlock (&ehci->lock);
- usb_hcd_giveback_urb (ehci_to_hcd(ehci), urb);
+ usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
spin_lock (&ehci->lock);
}
@@ -283,6 +276,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
{
struct ehci_qtd *last = NULL, *end = qh->dummy;
struct list_head *entry, *tmp;
+ int last_status = -EINPROGRESS;
int stopped;
unsigned count = 0;
int do_status = 0;
@@ -311,6 +305,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
struct ehci_qtd *qtd;
struct urb *urb;
u32 token = 0;
+ int qtd_status;
qtd = list_entry (entry, struct ehci_qtd, qtd_list);
urb = qtd->urb;
@@ -318,11 +313,12 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
/* clean up any state from previous QTD ...*/
if (last) {
if (likely (last->urb != urb)) {
- ehci_urb_done (ehci, last->urb);
+ ehci_urb_done(ehci, last->urb, last_status);
count++;
}
ehci_qtd_free (ehci, last);
last = NULL;
+ last_status = -EINPROGRESS;
}
/* ignore urbs submitted during completions we reported */
@@ -358,13 +354,14 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
stopped = 1;
if (unlikely (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)))
- urb->status = -ESHUTDOWN;
+ last_status = -ESHUTDOWN;
/* ignore active urbs unless some previous qtd
* for the urb faulted (including short read) or
* its urb was canceled. we may patch qh or qtds.
*/
- if (likely (urb->status == -EINPROGRESS))
+ if (likely(last_status == -EINPROGRESS &&
+ !urb->unlinked))
continue;
/* issue status after short control reads */
@@ -392,11 +389,14 @@ halt:
}
/* remove it from the queue */
- spin_lock (&urb->lock);
- qtd_copy_status (ehci, urb, qtd->length, token);
- do_status = (urb->status == -EREMOTEIO)
- && usb_pipecontrol (urb->pipe);
- spin_unlock (&urb->lock);
+ qtd_status = qtd_copy_status(ehci, urb, qtd->length, token);
+ if (unlikely(qtd_status == -EREMOTEIO)) {
+ do_status = (!urb->unlinked &&
+ usb_pipecontrol(urb->pipe));
+ qtd_status = 0;
+ }
+ if (likely(last_status == -EINPROGRESS))
+ last_status = qtd_status;
if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
last = list_entry (qtd->qtd_list.prev,
@@ -409,7 +409,7 @@ halt:
/* last urb's completion might still need calling */
if (likely (last != NULL)) {
- ehci_urb_done (ehci, last->urb);
+ ehci_urb_done(ehci, last->urb, last_status);
count++;
ehci_qtd_free (ehci, last);
}
@@ -913,7 +913,6 @@ static struct ehci_qh *qh_append_tds (
static int
submit_async (
struct ehci_hcd *ehci,
- struct usb_host_endpoint *ep,
struct urb *urb,
struct list_head *qtd_list,
gfp_t mem_flags
@@ -922,10 +921,10 @@ submit_async (
int epnum;
unsigned long flags;
struct ehci_qh *qh = NULL;
- int rc = 0;
+ int rc;
qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list);
- epnum = ep->desc.bEndpointAddress;
+ epnum = urb->ep->desc.bEndpointAddress;
#ifdef EHCI_URB_TRACE
ehci_dbg (ehci,
@@ -933,7 +932,7 @@ submit_async (
__FUNCTION__, urb->dev->devpath, urb,
epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
urb->transfer_buffer_length,
- qtd, ep->hcpriv);
+ qtd, urb->ep->hcpriv);
#endif
spin_lock_irqsave (&ehci->lock, flags);
@@ -942,9 +941,13 @@ submit_async (
rc = -ESHUTDOWN;
goto done;
}
+ rc = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+ if (unlikely(rc))
+ goto done;
- qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
+ qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
if (unlikely(qh == NULL)) {
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
rc = -ENOMEM;
goto done;
}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index e682f2342ef8..80d99bce2b38 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -797,7 +797,6 @@ done:
static int intr_submit (
struct ehci_hcd *ehci,
- struct usb_host_endpoint *ep,
struct urb *urb,
struct list_head *qtd_list,
gfp_t mem_flags
@@ -805,23 +804,26 @@ static int intr_submit (
unsigned epnum;
unsigned long flags;
struct ehci_qh *qh;
- int status = 0;
+ int status;
struct list_head empty;
/* get endpoint and transfer/schedule data */
- epnum = ep->desc.bEndpointAddress;
+ epnum = urb->ep->desc.bEndpointAddress;
spin_lock_irqsave (&ehci->lock, flags);
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
&ehci_to_hcd(ehci)->flags))) {
status = -ESHUTDOWN;
- goto done;
+ goto done_not_linked;
}
+ status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+ if (unlikely(status))
+ goto done_not_linked;
/* get qh and force any scheduling errors */
INIT_LIST_HEAD (&empty);
- qh = qh_append_tds (ehci, urb, &empty, epnum, &ep->hcpriv);
+ qh = qh_append_tds(ehci, urb, &empty, epnum, &urb->ep->hcpriv);
if (qh == NULL) {
status = -ENOMEM;
goto done;
@@ -832,13 +834,16 @@ static int intr_submit (
}
/* then queue the urb's tds to the qh */
- qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
+ qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
BUG_ON (qh == NULL);
/* ... update usbfs periodic stats */
ehci_to_hcd(ehci)->self.bandwidth_int_reqs++;
done:
+ if (unlikely(status))
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
spin_unlock_irqrestore (&ehci->lock, flags);
if (status)
qtd_list_free (ehci, urb, qtd_list);
@@ -1622,7 +1627,7 @@ itd_complete (
/* give urb back to the driver ... can be out-of-order */
dev = urb->dev;
- ehci_urb_done (ehci, urb);
+ ehci_urb_done(ehci, urb, 0);
urb = NULL;
/* defer stopping schedule; completion can submit */
@@ -1686,12 +1691,19 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb,
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags)))
+ &ehci_to_hcd(ehci)->flags))) {
status = -ESHUTDOWN;
- else
- status = iso_stream_schedule (ehci, urb, stream);
+ goto done_not_linked;
+ }
+ status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+ if (unlikely(status))
+ goto done_not_linked;
+ status = iso_stream_schedule(ehci, urb, stream);
if (likely (status == 0))
itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
+ else
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
spin_unlock_irqrestore (&ehci->lock, flags);
done:
@@ -1988,7 +2000,7 @@ sitd_complete (
/* give urb back to the driver */
dev = urb->dev;
- ehci_urb_done (ehci, urb);
+ ehci_urb_done(ehci, urb, 0);
urb = NULL;
/* defer stopping schedule; completion can submit */
@@ -2049,12 +2061,19 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags)))
+ &ehci_to_hcd(ehci)->flags))) {
status = -ESHUTDOWN;
- else
- status = iso_stream_schedule (ehci, urb, stream);
+ goto done_not_linked;
+ }
+ status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+ if (unlikely(status))
+ goto done_not_linked;
+ status = iso_stream_schedule(ehci, urb, stream);
if (status == 0)
sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
+ else
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
spin_unlock_irqrestore (&ehci->lock, flags);
done:
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 5c851a36de72..c27417f5b9d8 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -277,12 +277,11 @@ static void preproc_atl_queue(struct isp116x *isp116x)
processed urbs.
*/
static void finish_request(struct isp116x *isp116x, struct isp116x_ep *ep,
- struct urb *urb)
+ struct urb *urb, int status)
__releases(isp116x->lock) __acquires(isp116x->lock)
{
unsigned i;
- urb->hcpriv = NULL;
ep->error_count = 0;
if (usb_pipecontrol(urb->pipe))
@@ -290,8 +289,9 @@ __releases(isp116x->lock) __acquires(isp116x->lock)
urb_dbg(urb, "Finish");
+ usb_hcd_unlink_urb_from_ep(isp116x_to_hcd(isp116x), urb);
spin_unlock(&isp116x->lock);
- usb_hcd_giveback_urb(isp116x_to_hcd(isp116x), urb);
+ usb_hcd_giveback_urb(isp116x_to_hcd(isp116x), urb, status);
spin_lock(&isp116x->lock);
/* take idle endpoints out of the schedule */
@@ -445,12 +445,7 @@ static void postproc_atl_queue(struct isp116x *isp116x)
if (PTD_GET_ACTIVE(ptd)
|| (cc != TD_CC_NOERROR && cc < 0x0E))
break;
- if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
- urb->actual_length <
- urb->transfer_buffer_length)
- status = -EREMOTEIO;
- else
- status = 0;
+ status = 0;
ep->nextpid = 0;
break;
default:
@@ -458,14 +453,8 @@ static void postproc_atl_queue(struct isp116x *isp116x)
}
done:
- if (status != -EINPROGRESS) {
- spin_lock(&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
- spin_unlock(&urb->lock);
- }
- if (urb->status != -EINPROGRESS)
- finish_request(isp116x, ep, urb);
+ if (status != -EINPROGRESS || urb->unlinked)
+ finish_request(isp116x, ep, urb, status);
}
}
@@ -673,7 +662,7 @@ static int balance(struct isp116x *isp116x, u16 period, u16 load)
/*-----------------------------------------------------------------*/
static int isp116x_urb_enqueue(struct usb_hcd *hcd,
- struct usb_host_endpoint *hep, struct urb *urb,
+ struct urb *urb,
gfp_t mem_flags)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
@@ -682,6 +671,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
int is_out = !usb_pipein(pipe);
int type = usb_pipetype(pipe);
int epnum = usb_pipeendpoint(pipe);
+ struct usb_host_endpoint *hep = urb->ep;
struct isp116x_ep *ep = NULL;
unsigned long flags;
int i;
@@ -705,7 +695,12 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
if (!HC_IS_RUNNING(hcd->state)) {
kfree(ep);
ret = -ENODEV;
- goto fail;
+ goto fail_not_linked;
+ }
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret) {
+ kfree(ep);
+ goto fail_not_linked;
}
if (hep->hcpriv)
@@ -808,16 +803,13 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
}
}
- /* in case of unlink-during-submit */
- if (urb->status != -EINPROGRESS) {
- finish_request(isp116x, ep, urb);
- ret = 0;
- goto fail;
- }
urb->hcpriv = hep;
start_atl_transfers(isp116x);
fail:
+ if (ret)
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ fail_not_linked:
spin_unlock_irqrestore(&isp116x->lock, flags);
return ret;
}
@@ -825,20 +817,21 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
/*
Dequeue URBs.
*/
-static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+ int status)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
struct usb_host_endpoint *hep;
struct isp116x_ep *ep, *ep_act;
unsigned long flags;
+ int rc;
spin_lock_irqsave(&isp116x->lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
+
hep = urb->hcpriv;
- /* URB already unlinked (or never linked)? */
- if (!hep) {
- spin_unlock_irqrestore(&isp116x->lock, flags);
- return 0;
- }
ep = hep->hcpriv;
WARN_ON(hep != ep->hep);
@@ -855,10 +848,10 @@ static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
}
if (urb)
- finish_request(isp116x, ep, urb);
-
+ finish_request(isp116x, ep, urb, status);
+ done:
spin_unlock_irqrestore(&isp116x->lock, flags);
- return 0;
+ return rc;
}
static void isp116x_endpoint_disable(struct usb_hcd *hcd,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index f61c6cdd06f2..ebab5ce8f5ce 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -24,7 +24,7 @@
* small: 0) header + data packets 1) just header
*/
static void __maybe_unused
-urb_print (struct urb * urb, char * str, int small)
+urb_print(struct urb * urb, char * str, int small, int status)
{
unsigned int pipe= urb->pipe;
@@ -34,7 +34,7 @@ urb_print (struct urb * urb, char * str, int small)
}
#ifndef OHCI_VERBOSE_DEBUG
- if (urb->status != 0)
+ if (status != 0)
#endif
dbg("%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d",
str,
@@ -46,7 +46,7 @@ urb_print (struct urb * urb, char * str, int small)
urb->transfer_flags,
urb->actual_length,
urb->transfer_buffer_length,
- urb->status);
+ status);
#ifdef OHCI_VERBOSE_DEBUG
if (!small) {
@@ -66,7 +66,7 @@ urb_print (struct urb * urb, char * str, int small)
urb->transfer_buffer_length: urb->actual_length;
for (i = 0; i < 16 && i < len; i++)
printk (" %02x", ((__u8 *) urb->transfer_buffer) [i]);
- printk ("%s stat:%d\n", i < len? "...": "", urb->status);
+ printk ("%s stat:%d\n", i < len? "...": "", status);
}
}
#endif
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 6edf4097d2d2..240c7f507541 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -81,7 +81,6 @@ static void ohci_dump (struct ohci_hcd *ohci, int verbose);
static int ohci_init (struct ohci_hcd *ohci);
static void ohci_stop (struct usb_hcd *hcd);
static int ohci_restart (struct ohci_hcd *ohci);
-static void ohci_quirk_nec_worker (struct work_struct *work);
#include "ohci-hub.c"
#include "ohci-dbg.c"
@@ -118,7 +117,6 @@ MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
*/
static int ohci_urb_enqueue (
struct usb_hcd *hcd,
- struct usb_host_endpoint *ep,
struct urb *urb,
gfp_t mem_flags
) {
@@ -131,11 +129,11 @@ static int ohci_urb_enqueue (
int retval = 0;
#ifdef OHCI_VERBOSE_DEBUG
- urb_print (urb, "SUB", usb_pipein (pipe));
+ urb_print(urb, "SUB", usb_pipein(pipe), -EINPROGRESS);
#endif
/* every endpoint has a ed, locate and maybe (re)initialize it */
- if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
+ if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval)))
return -ENOMEM;
/* for the private part of the URB we need the number of TDs (size) */
@@ -200,22 +198,17 @@ static int ohci_urb_enqueue (
retval = -ENODEV;
goto fail;
}
-
- /* in case of unlink-during-submit */
- spin_lock (&urb->lock);
- if (urb->status != -EINPROGRESS) {
- spin_unlock (&urb->lock);
- urb->hcpriv = urb_priv;
- finish_urb (ohci, urb);
- retval = 0;
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval)
goto fail;
- }
/* schedule the ed if needed */
if (ed->state == ED_IDLE) {
retval = ed_schedule (ohci, ed);
- if (retval < 0)
- goto fail0;
+ if (retval < 0) {
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ goto fail;
+ }
if (ed->type == PIPE_ISOCHRONOUS) {
u16 frame = ohci_frame_no(ohci);
@@ -239,8 +232,6 @@ static int ohci_urb_enqueue (
urb->hcpriv = urb_priv;
td_submit_urb (ohci, urb);
-fail0:
- spin_unlock (&urb->lock);
fail:
if (retval)
urb_free_priv (ohci, urb_priv);
@@ -249,22 +240,26 @@ fail:
}
/*
- * decouple the URB from the HC queues (TDs, urb_priv); it's
- * already marked using urb->status. reporting is always done
+ * decouple the URB from the HC queues (TDs, urb_priv).
+ * reporting is always done
* asynchronously, and we might be dealing with an urb that's
* partially transferred, or an ED with other urbs being unlinked.
*/
-static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
+ int rc;
#ifdef OHCI_VERBOSE_DEBUG
- urb_print (urb, "UNLINK", 1);
+ urb_print(urb, "UNLINK", 1, status);
#endif
spin_lock_irqsave (&ohci->lock, flags);
- if (HC_IS_RUNNING(hcd->state)) {
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc) {
+ ; /* Do nothing */
+ } else if (HC_IS_RUNNING(hcd->state)) {
urb_priv_t *urb_priv;
/* Unless an IRQ completed the unlink while it was being
@@ -282,10 +277,10 @@ static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
* any more ... just clean up every urb's memory.
*/
if (urb->hcpriv)
- finish_urb (ohci, urb);
+ finish_urb(ohci, urb, status);
}
spin_unlock_irqrestore (&ohci->lock, flags);
- return 0;
+ return rc;
}
/*-------------------------------------------------------------------------*/
@@ -314,6 +309,8 @@ rescan:
if (!HC_IS_RUNNING (hcd->state)) {
sanitize:
ed->state = ED_IDLE;
+ if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+ ohci->eds_scheduled--;
finish_unlinks (ohci, 0);
}
@@ -321,7 +318,12 @@ sanitize:
case ED_UNLINK: /* wait for hw to finish? */
/* major IRQ delivery trouble loses INTR_SF too... */
if (limit-- == 0) {
- ohci_warn (ohci, "IRQ INTR_SF lossage\n");
+ ohci_warn(ohci, "ED unlink timeout\n");
+ if (quirk_zfmicro(ohci)) {
+ ohci_warn(ohci, "Attempting ZF TD recovery\n");
+ ohci->ed_to_check = ed;
+ ohci->zf_delay = 2;
+ }
goto sanitize;
}
spin_unlock_irqrestore (&ohci->lock, flags);
@@ -379,6 +381,93 @@ ohci_shutdown (struct usb_hcd *hcd)
(void) ohci_readl (ohci, &ohci->regs->control);
}
+static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
+{
+ return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0
+ && (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK)
+ == (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK)
+ && !list_empty(&ed->td_list);
+}
+
+/* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes
+ * an interrupt TD but neglects to add it to the donelist. On systems with
+ * this chipset, we need to periodically check the state of the queues to look
+ * for such "lost" TDs.
+ */
+static void unlink_watchdog_func(unsigned long _ohci)
+{
+ long flags;
+ unsigned max;
+ unsigned seen_count = 0;
+ unsigned i;
+ struct ed **seen = NULL;
+ struct ohci_hcd *ohci = (struct ohci_hcd *) _ohci;
+
+ spin_lock_irqsave(&ohci->lock, flags);
+ max = ohci->eds_scheduled;
+ if (!max)
+ goto done;
+
+ if (ohci->ed_to_check)
+ goto out;
+
+ seen = kcalloc(max, sizeof *seen, GFP_ATOMIC);
+ if (!seen)
+ goto out;
+
+ for (i = 0; i < NUM_INTS; i++) {
+ struct ed *ed = ohci->periodic[i];
+
+ while (ed) {
+ unsigned temp;
+
+ /* scan this branch of the periodic schedule tree */
+ for (temp = 0; temp < seen_count; temp++) {
+ if (seen[temp] == ed) {
+ /* we've checked it and what's after */
+ ed = NULL;
+ break;
+ }
+ }
+ if (!ed)
+ break;
+ seen[seen_count++] = ed;
+ if (!check_ed(ohci, ed)) {
+ ed = ed->ed_next;
+ continue;
+ }
+
+ /* HC's TD list is empty, but HCD sees at least one
+ * TD that's not been sent through the donelist.
+ */
+ ohci->ed_to_check = ed;
+ ohci->zf_delay = 2;
+
+ /* The HC may wait until the next frame to report the
+ * TD as done through the donelist and INTR_WDH. (We
+ * just *assume* it's not a multi-TD interrupt URB;
+ * those could defer the IRQ more than one frame, using
+ * DI...) Check again after the next INTR_SF.
+ */
+ ohci_writel(ohci, OHCI_INTR_SF,
+ &ohci->regs->intrstatus);
+ ohci_writel(ohci, OHCI_INTR_SF,
+ &ohci->regs->intrenable);
+
+ /* flush those writes */
+ (void) ohci_readl(ohci, &ohci->regs->control);
+
+ goto out;
+ }
+ }
+out:
+ kfree(seen);
+ if (ohci->eds_scheduled)
+ mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+done:
+ spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
/*-------------------------------------------------------------------------*
* HC functions
*-------------------------------------------------------------------------*/
@@ -616,6 +705,15 @@ retry:
mdelay ((temp >> 23) & 0x1fe);
hcd->state = HC_STATE_RUNNING;
+ if (quirk_zfmicro(ohci)) {
+ /* Create timer to watch for bad queue state on ZF Micro */
+ setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func,
+ (unsigned long) ohci);
+
+ ohci->eds_scheduled = 0;
+ ohci->ed_to_check = NULL;
+ }
+
ohci_dump (ohci, 1);
return 0;
@@ -629,10 +727,11 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct ohci_regs __iomem *regs = ohci->regs;
- int ints;
+ int ints;
/* we can eliminate a (slow) ohci_readl()
- if _only_ WDH caused this irq */
+ * if _only_ WDH caused this irq
+ */
if ((ohci->hcca->done_head != 0)
&& ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
& 0x01)) {
@@ -651,7 +750,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
if (ints & OHCI_INTR_UE) {
// e.g. due to PCI Master/Target Abort
- if (ohci->flags & OHCI_QUIRK_NEC) {
+ if (quirk_nec(ohci)) {
/* Workaround for a silicon bug in some NEC chips used
* in Apple's PowerBooks. Adapted from Darwin code.
*/
@@ -713,6 +812,31 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable);
}
+ if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) {
+ spin_lock(&ohci->lock);
+ if (ohci->ed_to_check) {
+ struct ed *ed = ohci->ed_to_check;
+
+ if (check_ed(ohci, ed)) {
+ /* HC thinks the TD list is empty; HCD knows
+ * at least one TD is outstanding
+ */
+ if (--ohci->zf_delay == 0) {
+ struct td *td = list_entry(
+ ed->td_list.next,
+ struct td, td_list);
+ ohci_warn(ohci,
+ "Reclaiming orphan TD %p\n",
+ td);
+ takeback_td(ohci, td);
+ ohci->ed_to_check = NULL;
+ }
+ } else
+ ohci->ed_to_check = NULL;
+ }
+ spin_unlock(&ohci->lock);
+ }
+
/* could track INTR_SO to reduce available PCI/... bandwidth */
/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
@@ -721,7 +845,9 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
spin_lock (&ohci->lock);
if (ohci->ed_rm_list)
finish_unlinks (ohci, ohci_frame_no(ohci));
- if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
+ if ((ints & OHCI_INTR_SF) != 0
+ && !ohci->ed_rm_list
+ && !ohci->ed_to_check
&& HC_IS_RUNNING(hcd->state))
ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
spin_unlock (&ohci->lock);
@@ -751,6 +877,9 @@ static void ohci_stop (struct usb_hcd *hcd)
free_irq(hcd->irq, hcd);
hcd->irq = -1;
+ if (quirk_zfmicro(ohci))
+ del_timer(&ohci->unlink_watchdog);
+
remove_debug_files (ohci);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
@@ -798,9 +927,8 @@ static int ohci_restart (struct ohci_hcd *ohci)
ed, ed->state);
}
- spin_lock (&urb->lock);
- urb->status = -ESHUTDOWN;
- spin_unlock (&urb->lock);
+ if (!urb->unlinked)
+ urb->unlinked = -ESHUTDOWN;
}
finish_unlinks (ohci, 0);
spin_unlock_irq(&ohci->lock);
@@ -828,27 +956,6 @@ static int ohci_restart (struct ohci_hcd *ohci)
/*-------------------------------------------------------------------------*/
-/* NEC workaround */
-static void ohci_quirk_nec_worker(struct work_struct *work)
-{
- struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
- int status;
-
- status = ohci_init(ohci);
- if (status != 0) {
- ohci_err(ohci, "Restarting NEC controller failed "
- "in ohci_init, %d\n", status);
- return;
- }
-
- status = ohci_restart(ohci);
- if (status != 0)
- ohci_err(ohci, "Restarting NEC controller failed "
- "in ohci_restart, %d\n", status);
-}
-
-/*-------------------------------------------------------------------------*/
-
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
MODULE_AUTHOR (DRIVER_AUTHOR);
@@ -926,11 +1033,17 @@ MODULE_LICENSE ("GPL");
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
#endif
+#ifdef CONFIG_USB_OHCI_HCD_SSB
+#include "ohci-ssb.c"
+#define SSB_OHCI_DRIVER ssb_ohci_driver
+#endif
+
#if !defined(PCI_DRIVER) && \
!defined(PLATFORM_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
!defined(SA1111_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER)
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SSB_OHCI_DRIVER)
#error "missing bus glue for ohci-hcd"
#endif
@@ -975,10 +1088,20 @@ static int __init ohci_hcd_mod_init(void)
goto error_pci;
#endif
+#ifdef SSB_OHCI_DRIVER
+ retval = ssb_driver_register(&SSB_OHCI_DRIVER);
+ if (retval)
+ goto error_ssb;
+#endif
+
return retval;
/* Error path */
+#ifdef SSB_OHCI_DRIVER
+ error_ssb:
+#endif
#ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
error_pci:
#endif
#ifdef SA1111_DRIVER
@@ -1003,6 +1126,9 @@ module_init(ohci_hcd_mod_init);
static void __exit ohci_hcd_mod_exit(void)
{
+#ifdef SSB_OHCI_DRIVER
+ ssb_driver_unregister(&SSB_OHCI_DRIVER);
+#endif
#ifdef PCI_DRIVER
pci_unregister_driver(&PCI_DRIVER);
#endif
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index 450c7b460c5a..2f20d3dc895b 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci)
ohci->next_statechange = jiffies;
spin_lock_init (&ohci->lock);
INIT_LIST_HEAD (&ohci->pending);
- INIT_WORK (&ohci->nec_work, ohci_quirk_nec_worker);
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index a5e2eb85d073..d0360f65ebd9 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -84,7 +84,7 @@ static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci->flags |= OHCI_QUIRK_ZFMICRO;
- ohci_dbg (ohci, "enabled Compaq ZFMicro chipset quirk\n");
+ ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
return 0;
}
@@ -113,11 +113,31 @@ static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
/* Check for NEC chip and apply quirk for allegedly lost interrupts.
*/
+
+static void ohci_quirk_nec_worker(struct work_struct *work)
+{
+ struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
+ int status;
+
+ status = ohci_init(ohci);
+ if (status != 0) {
+ ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+ "ohci_init", status);
+ return;
+ }
+
+ status = ohci_restart(ohci);
+ if (status != 0)
+ ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+ "ohci_restart", status);
+}
+
static int ohci_quirk_nec(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci->flags |= OHCI_QUIRK_NEC;
+ INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
return 0;
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index c43b66acd4d5..0a7426920150 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -134,8 +134,11 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
}
ohci = hcd_to_ohci(hcd);
- if (is_bigendian)
+ if (is_bigendian) {
ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+ if (of_device_is_compatible(dn, "mpc5200-ohci"))
+ ohci->flags |= OHCI_QUIRK_FRAME_NO;
+ }
ohci_hcd_init(ohci);
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 1a2e1777ca61..f95be1896b0d 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -73,6 +73,11 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
ohci = hcd_to_ohci(hcd);
ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+#ifdef CONFIG_PPC_MPC52xx
+ /* MPC52xx doesn't need frame_no shift */
+ ohci->flags |= OHCI_QUIRK_FRAME_NO;
+#endif
ohci_hcd_init(ohci);
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 830a3fe8615e..51817322232b 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -36,29 +36,15 @@ static void urb_free_priv (struct ohci_hcd *hc, urb_priv_t *urb_priv)
* PRECONDITION: ohci lock held, irqs blocked.
*/
static void
-finish_urb (struct ohci_hcd *ohci, struct urb *urb)
+finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status)
__releases(ohci->lock)
__acquires(ohci->lock)
{
// ASSERT (urb->hcpriv != 0);
urb_free_priv (ohci, urb->hcpriv);
- urb->hcpriv = NULL;
-
- spin_lock (&urb->lock);
- if (likely (urb->status == -EINPROGRESS))
- urb->status = 0;
- /* report short control reads right even though the data TD always
- * has TD_R set. (much simpler, but creates the 1-td limit.)
- */
- if (unlikely (urb->transfer_flags & URB_SHORT_NOT_OK)
- && unlikely (usb_pipecontrol (urb->pipe))
- && urb->actual_length < urb->transfer_buffer_length
- && usb_pipein (urb->pipe)
- && urb->status == 0) {
- urb->status = -EREMOTEIO;
- }
- spin_unlock (&urb->lock);
+ if (likely(status == -EINPROGRESS))
+ status = 0;
switch (usb_pipetype (urb->pipe)) {
case PIPE_ISOCHRONOUS:
@@ -70,12 +56,13 @@ __acquires(ohci->lock)
}
#ifdef OHCI_VERBOSE_DEBUG
- urb_print (urb, "RET", usb_pipeout (urb->pipe));
+ urb_print(urb, "RET", usb_pipeout (urb->pipe), status);
#endif
/* urb->complete() can reenter this HCD */
+ usb_hcd_unlink_urb_from_ep(ohci_to_hcd(ohci), urb);
spin_unlock (&ohci->lock);
- usb_hcd_giveback_urb (ohci_to_hcd(ohci), urb);
+ usb_hcd_giveback_urb(ohci_to_hcd(ohci), urb, status);
spin_lock (&ohci->lock);
/* stop periodic dma if it's not needed */
@@ -179,6 +166,10 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
ed->ed_prev = NULL;
ed->ed_next = NULL;
ed->hwNextED = 0;
+ if (quirk_zfmicro(ohci)
+ && (ed->type == PIPE_INTERRUPT)
+ && !(ohci->eds_scheduled++))
+ mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
wmb ();
/* we care about rm_list when setting CLE/BLE in case the HC was at
@@ -708,19 +699,18 @@ static void td_submit_urb (
* Done List handling functions
*-------------------------------------------------------------------------*/
-/* calculate transfer length/status and update the urb
- * PRECONDITION: irqsafe (only for urb->status locking)
- */
-static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
+/* calculate transfer length/status and update the urb */
+static int td_done(struct ohci_hcd *ohci, struct urb *urb, struct td *td)
{
u32 tdINFO = hc32_to_cpup (ohci, &td->hwINFO);
int cc = 0;
+ int status = -EINPROGRESS;
list_del (&td->td_list);
/* ISO ... drivers see per-TD length/status */
if (tdINFO & TD_ISO) {
- u16 tdPSW = ohci_hwPSW (ohci, td, 0);
+ u16 tdPSW = ohci_hwPSW(ohci, td, 0);
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
@@ -729,7 +719,7 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
cc = (tdPSW >> 12) & 0xF;
if (tdINFO & TD_CC) /* hc didn't touch? */
- return;
+ return status;
if (usb_pipeout (urb->pipe))
dlen = urb->iso_frame_desc [td->index].length;
@@ -762,12 +752,8 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
if (cc == TD_DATAUNDERRUN
&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
cc = TD_CC_NOERROR;
- if (cc != TD_CC_NOERROR && cc < 0x0E) {
- spin_lock (&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = cc_to_error [cc];
- spin_unlock (&urb->lock);
- }
+ if (cc != TD_CC_NOERROR && cc < 0x0E)
+ status = cc_to_error[cc];
/* count all non-empty packets except control SETUP packet */
if ((type != PIPE_CONTROL || td->index != 0) && tdBE != 0) {
@@ -786,14 +772,15 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
urb->actual_length,
urb->transfer_buffer_length);
}
+ return status;
}
/*-------------------------------------------------------------------------*/
-static inline struct td *
-ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
+static void ed_halted(struct ohci_hcd *ohci, struct td *td, int cc)
{
struct urb *urb = td->urb;
+ urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
@@ -805,13 +792,12 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
wmb ();
ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
- /* put any later tds from this urb onto the donelist, after 'td',
- * order won't matter here: no errors, and nothing was transferred.
- * also patch the ed so it looks as if those tds completed normally.
+ /* Get rid of all later tds from this urb. We don't have
+ * to be careful: no errors and nothing was transferred.
+ * Also patch the ed so it looks as if those tds completed normally.
*/
while (tmp != &ed->td_list) {
struct td *next;
- __hc32 info;
next = list_entry (tmp, struct td, td_list);
tmp = next->td_list.next;
@@ -826,14 +812,9 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
* then we need to leave the control STATUS packet queued
* and clear ED_SKIP.
*/
- info = next->hwINFO;
- info |= cpu_to_hc32 (ohci, TD_DONE);
- info &= ~cpu_to_hc32 (ohci, TD_CC);
- next->hwINFO = info;
-
- next->next_dl_td = rev;
- rev = next;
+ list_del(&next->td_list);
+ urb_priv->td_cnt++;
ed->hwHeadP = next->hwNextTD | toggle;
}
@@ -859,8 +840,6 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
hc32_to_cpu (ohci, td->hwINFO),
cc, cc_to_error [cc]);
}
-
- return rev;
}
/* replies to the request have to be on a FIFO basis so
@@ -897,7 +876,7 @@ static struct td *dl_reverse_done_list (struct ohci_hcd *ohci)
*/
if (cc != TD_CC_NOERROR
&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
- td_rev = ed_halted (ohci, td, cc, td_rev);
+ ed_halted(ohci, td, cc);
td->next_dl_td = td_rev;
td_rev = td;
@@ -940,8 +919,12 @@ skip_ed:
TD_MASK;
/* INTR_WDH may need to clean up first */
- if (td->td_dma != head)
- goto skip_ed;
+ if (td->td_dma != head) {
+ if (ed == ohci->ed_to_check)
+ ohci->ed_to_check = NULL;
+ else
+ goto skip_ed;
+ }
}
}
@@ -974,7 +957,7 @@ rescan_this:
urb = td->urb;
urb_priv = td->urb->hcpriv;
- if (urb->status == -EINPROGRESS) {
+ if (!urb->unlinked) {
prev = &td->hwNextTD;
continue;
}
@@ -990,7 +973,7 @@ rescan_this:
/* if URB is done, clean up */
if (urb_priv->td_cnt == urb_priv->length) {
modified = completed = 1;
- finish_urb (ohci, urb);
+ finish_urb(ohci, urb, 0);
}
}
if (completed && !list_empty (&ed->td_list))
@@ -998,6 +981,8 @@ rescan_this:
/* ED's now officially unlinked, hc doesn't see */
ed->state = ED_IDLE;
+ if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+ ohci->eds_scheduled--;
ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
ed->hwNextED = 0;
wmb ();
@@ -1021,7 +1006,7 @@ rescan_this:
if (ohci->ed_controltail) {
command |= OHCI_CLF;
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
if (!(ohci->hc_control & OHCI_CTRL_CLE)) {
control |= OHCI_CTRL_CLE;
@@ -1031,7 +1016,7 @@ rescan_this:
}
if (ohci->ed_bulktail) {
command |= OHCI_BLF;
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
if (!(ohci->hc_control & OHCI_CTRL_BLE)) {
control |= OHCI_CTRL_BLE;
@@ -1043,13 +1028,13 @@ rescan_this:
/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
if (control) {
ohci->hc_control |= control;
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
ohci_writel (ohci, ohci->hc_control,
&ohci->regs->control);
}
if (command) {
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
ohci_writel (ohci, command, &ohci->regs->cmdstatus);
}
@@ -1061,11 +1046,60 @@ rescan_this:
/*-------------------------------------------------------------------------*/
/*
+ * Used to take back a TD from the host controller. This would normally be
+ * called from within dl_done_list, however it may be called directly if the
+ * HC no longer sees the TD and it has not appeared on the donelist (after
+ * two frames). This bug has been observed on ZF Micro systems.
+ */
+static void takeback_td(struct ohci_hcd *ohci, struct td *td)
+{
+ struct urb *urb = td->urb;
+ urb_priv_t *urb_priv = urb->hcpriv;
+ struct ed *ed = td->ed;
+ int status;
+
+ /* update URB's length and status from TD */
+ status = td_done(ohci, urb, td);
+ urb_priv->td_cnt++;
+
+ /* If all this urb's TDs are done, call complete() */
+ if (urb_priv->td_cnt == urb_priv->length)
+ finish_urb(ohci, urb, status);
+
+ /* clean schedule: unlink EDs that are no longer busy */
+ if (list_empty(&ed->td_list)) {
+ if (ed->state == ED_OPER)
+ start_ed_unlink(ohci, ed);
+
+ /* ... reenabling halted EDs only after fault cleanup */
+ } else if ((ed->hwINFO & cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE))
+ == cpu_to_hc32(ohci, ED_SKIP)) {
+ td = list_entry(ed->td_list.next, struct td, td_list);
+ if (!(td->hwINFO & cpu_to_hc32(ohci, TD_DONE))) {
+ ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP);
+ /* ... hc may need waking-up */
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ ohci_writel(ohci, OHCI_CLF,
+ &ohci->regs->cmdstatus);
+ break;
+ case PIPE_BULK:
+ ohci_writel(ohci, OHCI_BLF,
+ &ohci->regs->cmdstatus);
+ break;
+ }
+ }
+ }
+}
+
+/*
* Process normal completions (error or success) and clean the schedules.
*
* This is the main path for handing urbs back to drivers. The only other
- * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of
- * scanning the (re-reversed) donelist as this does.
+ * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
+ * instead of scanning the (re-reversed) donelist as this does. There's
+ * an abnormal path too, handling a quirk in some Compaq silicon: URBs
+ * with TDs that appear to be orphaned are directly reclaimed.
*/
static void
dl_done_list (struct ohci_hcd *ohci)
@@ -1074,44 +1108,7 @@ dl_done_list (struct ohci_hcd *ohci)
while (td) {
struct td *td_next = td->next_dl_td;
- struct urb *urb = td->urb;
- urb_priv_t *urb_priv = urb->hcpriv;
- struct ed *ed = td->ed;
-
- /* update URB's length and status from TD */
- td_done (ohci, urb, td);
- urb_priv->td_cnt++;
-
- /* If all this urb's TDs are done, call complete() */
- if (urb_priv->td_cnt == urb_priv->length)
- finish_urb (ohci, urb);
-
- /* clean schedule: unlink EDs that are no longer busy */
- if (list_empty (&ed->td_list)) {
- if (ed->state == ED_OPER)
- start_ed_unlink (ohci, ed);
-
- /* ... reenabling halted EDs only after fault cleanup */
- } else if ((ed->hwINFO & cpu_to_hc32 (ohci,
- ED_SKIP | ED_DEQUEUE))
- == cpu_to_hc32 (ohci, ED_SKIP)) {
- td = list_entry (ed->td_list.next, struct td, td_list);
- if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
- ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
- /* ... hc may need waking-up */
- switch (ed->type) {
- case PIPE_CONTROL:
- ohci_writel (ohci, OHCI_CLF,
- &ohci->regs->cmdstatus);
- break;
- case PIPE_BULK:
- ohci_writel (ohci, OHCI_BLF,
- &ohci->regs->cmdstatus);
- break;
- }
- }
- }
-
+ takeback_td(ohci, td);
td = td_next;
}
}
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
new file mode 100644
index 000000000000..bc3e785d8c00
--- /dev/null
+++ b/drivers/usb/host/ohci-ssb.c
@@ -0,0 +1,247 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core OHCI driver
+ *
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+
+
+#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
+
+struct ssb_ohci_device {
+ struct ohci_hcd ohci; /* _must_ be at the beginning. */
+
+ u32 enable_flags;
+};
+
+static inline
+struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
+{
+ return (struct ssb_ohci_device *)(hcd->hcd_priv);
+}
+
+
+static int ssb_ohci_reset(struct usb_hcd *hcd)
+{
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+ struct ohci_hcd *ohci = &ohcidev->ohci;
+ int err;
+
+ ohci_hcd_init(ohci);
+ err = ohci_init(ohci);
+
+ return err;
+}
+
+static int ssb_ohci_start(struct usb_hcd *hcd)
+{
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+ struct ohci_hcd *ohci = &ohcidev->ohci;
+ int err;
+
+ err = ohci_run(ohci);
+ if (err < 0) {
+ ohci_err(ohci, "can't start\n");
+ ohci_stop(hcd);
+ }
+
+ return err;
+}
+
+#ifdef CONFIG_PM
+static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
+{
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+ struct ohci_hcd *ohci = &ohcidev->ohci;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+ ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
+
+ /* make sure snapshot being resumed re-enumerates everything */
+ if (message.event == PM_EVENT_PRETHAW)
+ ohci_usb_reset(ohci);
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+ return 0;
+}
+
+static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
+{
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ usb_hcd_resume_root_hub(hcd);
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static const struct hc_driver ssb_ohci_hc_driver = {
+ .description = "ssb-usb-ohci",
+ .product_desc = "SSB OHCI Controller",
+ .hcd_priv_size = sizeof(struct ssb_ohci_device),
+
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY | HCD_USB11,
+
+ .reset = ssb_ohci_reset,
+ .start = ssb_ohci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+#ifdef CONFIG_PM
+ .suspend = ssb_ohci_hcd_suspend,
+ .resume = ssb_ohci_hcd_resume,
+#endif
+
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ .get_frame_number = ohci_get_frame,
+
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static void ssb_ohci_detach(struct ssb_device *dev)
+{
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ usb_put_hcd(hcd);
+ ssb_device_disable(dev, 0);
+}
+
+static int ssb_ohci_attach(struct ssb_device *dev)
+{
+ struct ssb_ohci_device *ohcidev;
+ struct usb_hcd *hcd;
+ int err = -ENOMEM;
+ u32 tmp, flags = 0;
+
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+ flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+
+ ssb_device_enable(dev, flags);
+
+ hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+ dev->dev->bus_id);
+ if (!hcd)
+ goto err_dev_disable;
+ ohcidev = hcd_to_ssb_ohci(hcd);
+ ohcidev->enable_flags = flags;
+
+ tmp = ssb_read32(dev, SSB_ADMATCH0);
+ hcd->rsrc_start = ssb_admatch_base(tmp);
+ hcd->rsrc_len = ssb_admatch_size(tmp);
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs)
+ goto err_put_hcd;
+ err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+ if (err)
+ goto err_iounmap;
+
+ ssb_set_drvdata(dev, hcd);
+
+ return err;
+
+err_iounmap:
+ iounmap(hcd->regs);
+err_put_hcd:
+ usb_put_hcd(hcd);
+err_dev_disable:
+ ssb_device_disable(dev, flags);
+ return err;
+}
+
+static int ssb_ohci_probe(struct ssb_device *dev,
+ const struct ssb_device_id *id)
+{
+ int err;
+ u16 chipid_top;
+
+ /* USBcores are only connected on embedded devices. */
+ chipid_top = (dev->bus->chip_id & 0xFF00);
+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
+ return -ENODEV;
+
+ /* TODO: Probably need checks here; is the core connected? */
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ /* We currently always attach SSB_DEV_USB11_HOSTDEV
+ * as HOST OHCI. If we want to attach it as Client device,
+ * we must branch here and call into the (yet to
+ * be written) Client mode driver. Same for remove(). */
+
+ err = ssb_ohci_attach(dev);
+
+ return err;
+}
+
+static void ssb_ohci_remove(struct ssb_device *dev)
+{
+ ssb_ohci_detach(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
+{
+ ssb_device_disable(dev, 0);
+
+ return 0;
+}
+
+static int ssb_ohci_resume(struct ssb_device *dev)
+{
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+
+ ssb_device_enable(dev, ohcidev->enable_flags);
+
+ return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_ohci_suspend NULL
+#define ssb_ohci_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_ohci_table[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+ SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
+
+static struct ssb_driver ssb_ohci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ssb_ohci_table,
+ .probe = ssb_ohci_probe,
+ .remove = ssb_ohci_remove,
+ .suspend = ssb_ohci_suspend,
+ .resume = ssb_ohci_resume,
+};
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 4ada43cf1387..47c5c66a282c 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -398,11 +398,38 @@ struct ohci_hcd {
#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
#define OHCI_QUIRK_NEC 0x40 /* lost interrupts */
+#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */
// there are also chip quirks/bugs in init logic
struct work_struct nec_work; /* Worker for NEC quirk */
+
+ /* Needed for ZF Micro quirk */
+ struct timer_list unlink_watchdog;
+ unsigned eds_scheduled;
+ struct ed *ed_to_check;
+ unsigned zf_delay;
};
+#ifdef CONFIG_PCI
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_NEC;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_ZFMICRO;
+}
+#else
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+#endif
+
/* convert between an hcd pointer and the corresponding ohci_hcd */
static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
{
@@ -607,15 +634,12 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
/* HCCA frame number is 16 bits, but is accessed as 32 bits since not all
* hardware handles 16 bit reads. That creates a different confusion on
* some big-endian SOC implementations. Same thing happens with PSW access.
- *
- * FIXME: Deal with that as a runtime quirk when STB03xxx is ported over
- * to arch/powerpc
*/
-#ifdef CONFIG_STB03xxx
-#define OHCI_BE_FRAME_NO_SHIFT 16
+#ifdef CONFIG_PPC_MPC52xx
+#define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
#else
-#define OHCI_BE_FRAME_NO_SHIFT 0
+#define big_endian_frame_no_quirk(ohci) 0
#endif
static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
@@ -623,7 +647,8 @@ static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
u32 tmp;
if (big_endian_desc(ohci)) {
tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
- tmp >>= OHCI_BE_FRAME_NO_SHIFT;
+ if (!big_endian_frame_no_quirk(ohci))
+ tmp >>= 16;
} else
tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 40a1de4c256e..ae8ec4474eb8 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -782,10 +782,12 @@ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
kfree(td);
if (urb) {
- urb->status = -ENODEV;
- urb->hcpriv = NULL;
+ usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597),
+ urb);
+
spin_unlock(&r8a66597->lock);
- usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb);
+ usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb,
+ -ENODEV);
spin_lock(&r8a66597->lock);
}
break;
@@ -832,7 +834,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
info.pipenum = get_empty_pipenum(r8a66597, ep);
info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
info.epnum = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- info.maxpacket = ep->wMaxPacketSize;
+ info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
info.type = get_r8a66597_type(ep->bmAttributes
& USB_ENDPOINT_XFERTYPE_MASK);
info.bufnum = get_bufnum(info.pipenum);
@@ -923,7 +925,7 @@ static void prepare_setup_packet(struct r8a66597 *r8a66597,
r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
for (i = 0; i < 4; i++) {
- r8a66597_write(r8a66597, p[i], setup_addr);
+ r8a66597_write(r8a66597, cpu_to_le16(p[i]), setup_addr);
setup_addr += 2;
}
r8a66597_write(r8a66597, SUREQ, DCPCTR);
@@ -1032,6 +1034,15 @@ static void prepare_status_packet(struct r8a66597 *r8a66597,
pipe_start(r8a66597, td->pipe);
}
+static int is_set_address(unsigned char *setup_packet)
+{
+ if (((setup_packet[0] & USB_TYPE_MASK) == USB_TYPE_STANDARD) &&
+ setup_packet[1] == USB_REQ_SET_ADDRESS)
+ return 1;
+ else
+ return 0;
+}
+
/* this function must be called with interrupt disabled */
static int start_transfer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
{
@@ -1039,7 +1050,7 @@ static int start_transfer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
switch (td->type) {
case USB_PID_SETUP:
- if (td->urb->setup_packet[1] == USB_REQ_SET_ADDRESS) {
+ if (is_set_address(td->urb->setup_packet)) {
td->set_address = 1;
td->urb->setup_packet[2] = alloc_usb_address(r8a66597,
td->urb);
@@ -1106,8 +1117,9 @@ static void set_td_timer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
}
/* this function must be called with interrupt disabled */
-static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
- u16 pipenum, struct urb *urb)
+static void finish_request(struct r8a66597 *r8a66597, struct r8a66597_td *td,
+ u16 pipenum, struct urb *urb, int status)
+__releases(r8a66597->lock) __acquires(r8a66597->lock)
{
int restart = 0;
struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597);
@@ -1115,7 +1127,7 @@ static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
r8a66597->timeout_map &= ~(1 << pipenum);
if (likely(td)) {
- if (td->set_address && urb->status != 0)
+ if (td->set_address && (status != 0 || urb->unlinked))
r8a66597->address_map &= ~(1 << urb->setup_packet[2]);
pipe_toggle_save(r8a66597, td->pipe, urb);
@@ -1130,9 +1142,9 @@ static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
if (usb_pipeisoc(urb->pipe))
urb->start_frame = r8a66597_get_frame(hcd);
- urb->hcpriv = NULL;
+ usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
spin_unlock(&r8a66597->lock);
- usb_hcd_giveback_urb(hcd, urb);
+ usb_hcd_giveback_urb(hcd, urb, status);
spin_lock(&r8a66597->lock);
}
@@ -1146,14 +1158,6 @@ static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
}
}
-/* this function must be called with interrupt disabled */
-static void finish_request(struct r8a66597 *r8a66597, struct r8a66597_td *td,
- u16 pipenum, struct urb *urb)
-__releases(r8a66597->lock) __acquires(r8a66597->lock)
-{
- done(r8a66597, td, pipenum, urb);
-}
-
static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
{
u16 tmp;
@@ -1162,6 +1166,7 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
struct r8a66597_td *td = r8a66597_get_td(r8a66597, pipenum);
struct urb *urb;
int finish = 0;
+ int status = 0;
if (unlikely(!td))
return;
@@ -1170,17 +1175,15 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
fifo_change_from_pipe(r8a66597, td->pipe);
tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
if (unlikely((tmp & FRDY) == 0)) {
- urb->status = -EPIPE;
pipe_stop(r8a66597, td->pipe);
pipe_irq_disable(r8a66597, pipenum);
err("in fifo not ready (%d)", pipenum);
- finish_request(r8a66597, td, pipenum, td->urb);
+ finish_request(r8a66597, td, pipenum, td->urb, -EPIPE);
return;
}
/* prepare parameters */
rcv_len = tmp & DTLN;
- bufsize = td->maxpacket;
if (usb_pipeisoc(urb->pipe)) {
buf = (u16 *)(urb->transfer_buffer +
urb->iso_frame_desc[td->iso_cnt].offset);
@@ -1189,29 +1192,31 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
buf = (void *)urb->transfer_buffer + urb->actual_length;
urb_len = urb->transfer_buffer_length - urb->actual_length;
}
- if (rcv_len < bufsize)
- size = min(rcv_len, urb_len);
- else
- size = min(bufsize, urb_len);
+ bufsize = min(urb_len, (int) td->maxpacket);
+ if (rcv_len <= bufsize) {
+ size = rcv_len;
+ } else {
+ size = bufsize;
+ status = -EOVERFLOW;
+ finish = 1;
+ }
/* update parameters */
urb->actual_length += size;
if (rcv_len == 0)
td->zero_packet = 1;
- if ((size % td->maxpacket) > 0) {
+ if (rcv_len < bufsize) {
td->short_packet = 1;
- if (urb->transfer_buffer_length != urb->actual_length &&
- urb->transfer_flags & URB_SHORT_NOT_OK)
- td->urb->status = -EREMOTEIO;
}
if (usb_pipeisoc(urb->pipe)) {
urb->iso_frame_desc[td->iso_cnt].actual_length = size;
- urb->iso_frame_desc[td->iso_cnt].status = 0;
+ urb->iso_frame_desc[td->iso_cnt].status = status;
td->iso_cnt++;
+ finish = 0;
}
/* check transfer finish */
- if (check_transfer_finish(td, urb)) {
+ if (finish || check_transfer_finish(td, urb)) {
pipe_stop(r8a66597, td->pipe);
pipe_irq_disable(r8a66597, pipenum);
finish = 1;
@@ -1226,11 +1231,8 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
buf, size);
}
- if (finish && pipenum != 0) {
- if (td->urb->status == -EINPROGRESS)
- td->urb->status = 0;
- finish_request(r8a66597, td, pipenum, urb);
- }
+ if (finish && pipenum != 0)
+ finish_request(r8a66597, td, pipenum, urb, status);
}
static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
@@ -1248,11 +1250,10 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
fifo_change_from_pipe(r8a66597, td->pipe);
tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
if (unlikely((tmp & FRDY) == 0)) {
- urb->status = -EPIPE;
pipe_stop(r8a66597, td->pipe);
pipe_irq_disable(r8a66597, pipenum);
err("out write fifo not ready. (%d)", pipenum);
- finish_request(r8a66597, td, pipenum, td->urb);
+ finish_request(r8a66597, td, pipenum, urb, -EPIPE);
return;
}
@@ -1297,7 +1298,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
}
-static void check_next_phase(struct r8a66597 *r8a66597)
+static void check_next_phase(struct r8a66597 *r8a66597, int status)
{
struct r8a66597_td *td = r8a66597_get_td(r8a66597, 0);
struct urb *urb;
@@ -1310,49 +1311,41 @@ static void check_next_phase(struct r8a66597 *r8a66597)
switch (td->type) {
case USB_PID_IN:
case USB_PID_OUT:
- if (urb->status != -EINPROGRESS) {
- finish = 1;
- break;
- }
if (check_transfer_finish(td, urb))
td->type = USB_PID_ACK;
break;
case USB_PID_SETUP:
- if (urb->status != -EINPROGRESS)
- finish = 1;
- else if (urb->transfer_buffer_length == urb->actual_length) {
+ if (urb->transfer_buffer_length == urb->actual_length)
td->type = USB_PID_ACK;
- urb->status = 0;
- } else if (usb_pipeout(urb->pipe))
+ else if (usb_pipeout(urb->pipe))
td->type = USB_PID_OUT;
else
td->type = USB_PID_IN;
break;
case USB_PID_ACK:
finish = 1;
- if (urb->status == -EINPROGRESS)
- urb->status = 0;
break;
}
- if (finish)
- finish_request(r8a66597, td, 0, urb);
+ if (finish || status != 0 || urb->unlinked)
+ finish_request(r8a66597, td, 0, urb, status);
else
start_transfer(r8a66597, td);
}
-static void set_urb_error(struct r8a66597 *r8a66597, u16 pipenum)
+static int get_urb_error(struct r8a66597 *r8a66597, u16 pipenum)
{
struct r8a66597_td *td = r8a66597_get_td(r8a66597, pipenum);
- if (td && td->urb) {
+ if (td) {
u16 pid = r8a66597_read(r8a66597, td->pipe->pipectr) & PID;
if (pid == PID_NAK)
- td->urb->status = -ECONNRESET;
+ return -ECONNRESET;
else
- td->urb->status = -EPIPE;
+ return -EPIPE;
}
+ return 0;
}
static void irq_pipe_ready(struct r8a66597 *r8a66597)
@@ -1371,7 +1364,7 @@ static void irq_pipe_ready(struct r8a66597 *r8a66597)
packet_read(r8a66597, 0);
else
pipe_irq_disable(r8a66597, 0);
- check_next_phase(r8a66597);
+ check_next_phase(r8a66597, 0);
}
for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
@@ -1405,7 +1398,7 @@ static void irq_pipe_empty(struct r8a66597 *r8a66597)
td = r8a66597_get_td(r8a66597, 0);
if (td && td->type != USB_PID_OUT)
disable_irq_empty(r8a66597, 0);
- check_next_phase(r8a66597);
+ check_next_phase(r8a66597, 0);
}
for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
@@ -1420,9 +1413,8 @@ static void irq_pipe_empty(struct r8a66597 *r8a66597)
if ((tmp & INBUFM) == 0) {
disable_irq_empty(r8a66597, pipenum);
pipe_irq_disable(r8a66597, pipenum);
- if (td->urb->status == -EINPROGRESS)
- td->urb->status = 0;
- finish_request(r8a66597, td, pipenum, td->urb);
+ finish_request(r8a66597, td, pipenum, td->urb,
+ 0);
}
}
}
@@ -1433,15 +1425,16 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
u16 check;
u16 pipenum;
u16 mask;
+ int status;
mask = r8a66597_read(r8a66597, NRDYSTS)
& r8a66597_read(r8a66597, NRDYENB);
r8a66597_write(r8a66597, ~mask, NRDYSTS);
if (mask & NRDY0) {
cfifo_change(r8a66597, 0);
- set_urb_error(r8a66597, 0);
+ status = get_urb_error(r8a66597, 0);
pipe_irq_disable(r8a66597, 0);
- check_next_phase(r8a66597);
+ check_next_phase(r8a66597, status);
}
for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
@@ -1452,10 +1445,10 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
if (unlikely(!td))
continue;
- set_urb_error(r8a66597, pipenum);
+ status = get_urb_error(r8a66597, pipenum);
pipe_irq_disable(r8a66597, pipenum);
pipe_stop(r8a66597, td->pipe);
- finish_request(r8a66597, td, pipenum, td->urb);
+ finish_request(r8a66597, td, pipenum, td->urb, status);
}
}
}
@@ -1475,6 +1468,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
u16 intsts0, intsts1, intsts2;
u16 intenb0, intenb1, intenb2;
u16 mask0, mask1, mask2;
+ int status;
spin_lock(&r8a66597->lock);
@@ -1518,12 +1512,12 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
}
if (mask1 & SIGN) {
r8a66597_write(r8a66597, ~SIGN, INTSTS1);
- set_urb_error(r8a66597, 0);
- check_next_phase(r8a66597);
+ status = get_urb_error(r8a66597, 0);
+ check_next_phase(r8a66597, status);
}
if (mask1 & SACK) {
r8a66597_write(r8a66597, ~SACK, INTSTS1);
- check_next_phase(r8a66597);
+ check_next_phase(r8a66597, 0);
}
}
if (mask0) {
@@ -1722,21 +1716,25 @@ static struct r8a66597_td *r8a66597_make_td(struct r8a66597 *r8a66597,
}
static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
- struct usb_host_endpoint *hep,
struct urb *urb,
gfp_t mem_flags)
{
+ struct usb_host_endpoint *hep = urb->ep;
struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
struct r8a66597_td *td = NULL;
- int ret = 0, request = 0;
+ int ret, request = 0;
unsigned long flags;
spin_lock_irqsave(&r8a66597->lock, flags);
if (!get_urb_to_r8a66597_dev(r8a66597, urb)) {
ret = -ENODEV;
- goto error;
+ goto error_not_linked;
}
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto error_not_linked;
+
if (!hep->hcpriv) {
hep->hcpriv = kzalloc(sizeof(struct r8a66597_pipe),
GFP_ATOMIC);
@@ -1761,15 +1759,7 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
if (list_empty(&r8a66597->pipe_queue[td->pipenum]))
request = 1;
list_add_tail(&td->queue, &r8a66597->pipe_queue[td->pipenum]);
-
- spin_lock(&urb->lock);
- if (urb->status != -EINPROGRESS) {
- spin_unlock(&urb->lock);
- ret = -EPIPE;
- goto error;
- }
urb->hcpriv = td;
- spin_unlock(&urb->lock);
if (request) {
ret = start_transfer(r8a66597, td);
@@ -1781,26 +1771,36 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
set_td_timer(r8a66597, td);
error:
+ if (ret)
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+error_not_linked:
spin_unlock_irqrestore(&r8a66597->lock, flags);
return ret;
}
-static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+ int status)
{
struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
struct r8a66597_td *td;
unsigned long flags;
+ int rc;
spin_lock_irqsave(&r8a66597->lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
+
if (urb->hcpriv) {
td = urb->hcpriv;
pipe_stop(r8a66597, td->pipe);
pipe_irq_disable(r8a66597, td->pipenum);
disable_irq_empty(r8a66597, td->pipenum);
- done(r8a66597, td, td->pipenum, urb);
+ finish_request(r8a66597, td, td->pipenum, urb, status);
}
+ done:
spin_unlock_irqrestore(&r8a66597->lock, flags);
- return 0;
+ return rc;
}
static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
@@ -1830,7 +1830,7 @@ static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
td = r8a66597_get_td(r8a66597, pipenum);
if (td)
urb = td->urb;
- done(r8a66597, td, pipenum, urb);
+ finish_request(r8a66597, td, pipenum, urb, -ESHUTDOWN);
kfree(hep->hcpriv);
hep->hcpriv = NULL;
spin_unlock_irqrestore(&r8a66597->lock, flags);
@@ -2027,7 +2027,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case GetPortStatus:
if (wIndex > R8A66597_MAX_ROOT_HUB)
goto error;
- *(u32 *)buf = rh->port;
+ *(u32 *)buf = cpu_to_le32(rh->port);
break;
case SetPortFeature:
if (wIndex > R8A66597_MAX_ROOT_HUB)
@@ -2126,8 +2126,8 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597);
del_timer_sync(&r8a66597->rh_timer);
- iounmap((void *)r8a66597->reg);
usb_remove_hcd(hcd);
+ iounmap((void *)r8a66597->reg);
usb_put_hcd(hcd);
return 0;
}
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 4cfa3ff2c993..94d859aa73f8 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -435,14 +435,9 @@ static void finish_request(
if (usb_pipecontrol(urb->pipe))
ep->nextpid = USB_PID_SETUP;
- spin_lock(&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
- urb->hcpriv = NULL;
- spin_unlock(&urb->lock);
-
+ usb_hcd_unlink_urb_from_ep(sl811_to_hcd(sl811), urb);
spin_unlock(&sl811->lock);
- usb_hcd_giveback_urb(sl811_to_hcd(sl811), urb);
+ usb_hcd_giveback_urb(sl811_to_hcd(sl811), urb, status);
spin_lock(&sl811->lock);
/* leave active endpoints in the schedule */
@@ -538,35 +533,21 @@ done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank)
bank + SL11H_XFERCNTREG);
if (len > ep->length) {
len = ep->length;
- urb->status = -EOVERFLOW;
+ urbstat = -EOVERFLOW;
}
urb->actual_length += len;
sl811_read_buf(sl811, SL811HS_PACKET_BUF(bank == 0),
buf, len);
usb_dotoggle(udev, ep->epnum, 0);
- if (urb->actual_length == urb->transfer_buffer_length)
- urbstat = 0;
- else if (len < ep->maxpacket) {
- if (urb->transfer_flags & URB_SHORT_NOT_OK)
- urbstat = -EREMOTEIO;
+ if (urbstat == -EINPROGRESS &&
+ (len < ep->maxpacket ||
+ urb->actual_length ==
+ urb->transfer_buffer_length)) {
+ if (usb_pipecontrol(urb->pipe))
+ ep->nextpid = USB_PID_ACK;
else
urbstat = 0;
}
- if (usb_pipecontrol(urb->pipe)
- && (urbstat == -EREMOTEIO
- || urbstat == 0)) {
-
- /* NOTE if the status stage STALLs (why?),
- * this reports the wrong urb status.
- */
- spin_lock(&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = urbstat;
- spin_unlock(&urb->lock);
-
- urb = NULL;
- ep->nextpid = USB_PID_ACK;
- }
break;
case USB_PID_SETUP:
// PACKET("...ACK/setup_%02x qh%p\n", bank, ep);
@@ -605,7 +586,7 @@ done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank)
bank, status, ep, urbstat);
}
- if (urb && (urbstat != -EINPROGRESS || urb->status != -EINPROGRESS))
+ if (urbstat != -EINPROGRESS || urb->unlinked)
finish_request(sl811, ep, urb, urbstat);
}
@@ -807,7 +788,6 @@ static int balance(struct sl811 *sl811, u16 period, u16 load)
static int sl811h_urb_enqueue(
struct usb_hcd *hcd,
- struct usb_host_endpoint *hep,
struct urb *urb,
gfp_t mem_flags
) {
@@ -820,7 +800,8 @@ static int sl811h_urb_enqueue(
struct sl811h_ep *ep = NULL;
unsigned long flags;
int i;
- int retval = 0;
+ int retval;
+ struct usb_host_endpoint *hep = urb->ep;
#ifdef DISABLE_ISO
if (type == PIPE_ISOCHRONOUS)
@@ -838,7 +819,12 @@ static int sl811h_urb_enqueue(
|| !HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
kfree(ep);
- goto fail;
+ goto fail_not_linked;
+ }
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval) {
+ kfree(ep);
+ goto fail_not_linked;
}
if (hep->hcpriv) {
@@ -951,37 +937,31 @@ static int sl811h_urb_enqueue(
sofirq_on(sl811);
}
- /* in case of unlink-during-submit */
- spin_lock(&urb->lock);
- if (urb->status != -EINPROGRESS) {
- spin_unlock(&urb->lock);
- finish_request(sl811, ep, urb, 0);
- retval = 0;
- goto fail;
- }
urb->hcpriv = hep;
- spin_unlock(&urb->lock);
-
start_transfer(sl811);
sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
fail:
+ if (retval)
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+fail_not_linked:
spin_unlock_irqrestore(&sl811->lock, flags);
return retval;
}
-static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct sl811 *sl811 = hcd_to_sl811(hcd);
struct usb_host_endpoint *hep;
unsigned long flags;
struct sl811h_ep *ep;
- int retval = 0;
+ int retval;
spin_lock_irqsave(&sl811->lock, flags);
- hep = urb->hcpriv;
- if (!hep)
+ retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (retval)
goto fail;
+ hep = urb->hcpriv;
ep = hep->hcpriv;
if (ep) {
/* finish right away if this urb can't be active ...
@@ -1029,8 +1009,8 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
(sl811->active_a == ep) ? "A" : "B");
} else
-fail:
retval = -EINVAL;
+ fail:
spin_unlock_irqrestore(&sl811->lock, flags);
return retval;
}
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index b88eb3c62c02..ac283b09a63f 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -51,7 +51,6 @@
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
-#include <linux/pci_ids.h>
#include <linux/mutex.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -184,7 +183,7 @@ struct u132_ring {
struct u132 {
struct kref kref;
struct list_head u132_list;
- struct semaphore sw_lock;
+ struct mutex sw_lock;
struct semaphore scheduler_lock;
struct u132_platform_data *board;
struct platform_device *platform_dev;
@@ -493,20 +492,20 @@ static void u132_hcd_monitor_work(struct work_struct *work)
return;
} else {
int retval;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
retval = read_roothub_info(u132);
if (retval) {
struct usb_hcd *hcd = u132_to_hcd(u132);
u132_disable(u132);
u132->going = 1;
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
usb_hc_died(hcd);
ftdi_elan_gone_away(u132->platform_dev);
u132_monitor_put_kref(u132);
return;
} else {
u132_monitor_requeue_work(u132, 500);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return;
}
}
@@ -519,9 +518,8 @@ static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp,
unsigned long irqs;
struct usb_hcd *hcd = u132_to_hcd(u132);
urb->error_count = 0;
- urb->status = status;
- urb->hcpriv = NULL;
spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
endp->queue_next += 1;
if (ENDP_QUEUE_SIZE > --endp->queue_size) {
endp->active = 0;
@@ -543,7 +541,7 @@ static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp,
u132_ring_queue_work(u132, ring, 0);
up(&u132->scheduler_lock);
u132_endp_put_kref(u132, endp);
- usb_hcd_giveback_urb(hcd, urb);
+ usb_hcd_giveback_urb(hcd, urb, status);
return;
}
@@ -559,9 +557,8 @@ static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp,
unsigned long irqs;
struct usb_hcd *hcd = u132_to_hcd(u132);
urb->error_count = 0;
- urb->status = status;
- urb->hcpriv = NULL;
spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
endp->queue_next += 1;
if (ENDP_QUEUE_SIZE > --endp->queue_size) {
endp->active = 0;
@@ -576,7 +573,7 @@ static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp,
endp->active = 0;
spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
kfree(urbq);
- } usb_hcd_giveback_urb(hcd, urb);
+ } usb_hcd_giveback_urb(hcd, urb, status);
return;
}
@@ -646,12 +643,12 @@ static void u132_hcd_interrupt_recv(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
struct u132_ring *ring = endp->ring;
u8 *u = urb->transfer_buffer + urb->actual_length;
u8 *b = buf;
@@ -717,10 +714,10 @@ static void u132_hcd_interrupt_recv(void *data, struct urb *urb, u8 *buf,
return;
}
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -745,12 +742,12 @@ static void u132_hcd_bulk_output_sent(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
struct u132_ring *ring = endp->ring;
urb->actual_length += len;
endp->toggle_bits = toggle_bits;
@@ -769,10 +766,10 @@ static void u132_hcd_bulk_output_sent(void *data, struct urb *urb, u8 *buf,
return;
}
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -798,12 +795,12 @@ static void u132_hcd_bulk_input_recv(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
struct u132_ring *ring = endp->ring;
u8 *u = urb->transfer_buffer + urb->actual_length;
u8 *b = buf;
@@ -872,10 +869,10 @@ static void u132_hcd_bulk_input_recv(void *data, struct urb *urb, u8 *buf,
return;
}
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -899,20 +896,20 @@ static void u132_hcd_configure_empty_sent(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -937,12 +934,12 @@ static void u132_hcd_configure_input_recv(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
struct u132_ring *ring = endp->ring;
u8 *u = urb->transfer_buffer;
u8 *b = buf;
@@ -981,10 +978,10 @@ static void u132_hcd_configure_input_recv(void *data, struct urb *urb, u8 *buf,
return;
}
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1008,20 +1005,20 @@ static void u132_hcd_configure_empty_recv(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1046,12 +1043,12 @@ static void u132_hcd_configure_setup_sent(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
if (usb_pipein(urb->pipe)) {
int retval;
struct u132_ring *ring = endp->ring;
@@ -1078,10 +1075,10 @@ static void u132_hcd_configure_setup_sent(void *data, struct urb *urb, u8 *buf,
return;
}
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1107,22 +1104,22 @@ static void u132_hcd_enumeration_empty_recv(void *data, struct urb *urb,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
u132->addr[0].address = 0;
endp->usb_addr = udev->usb_addr;
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1146,12 +1143,12 @@ static void u132_hcd_enumeration_address_sent(void *data, struct urb *urb,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
int retval;
struct u132_ring *ring = endp->ring;
up(&u132->scheduler_lock);
@@ -1163,10 +1160,10 @@ static void u132_hcd_enumeration_address_sent(void *data, struct urb *urb,
u132_hcd_giveback_urb(u132, endp, urb, retval);
return;
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1190,20 +1187,20 @@ static void u132_hcd_initial_empty_sent(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1228,12 +1225,12 @@ static void u132_hcd_initial_input_recv(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
int retval;
struct u132_ring *ring = endp->ring;
u8 *u = urb->transfer_buffer;
@@ -1252,10 +1249,10 @@ static void u132_hcd_initial_input_recv(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, retval);
return;
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1280,12 +1277,12 @@ static void u132_hcd_initial_setup_sent(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
return;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
up(&u132->scheduler_lock);
u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
return;
- } else if (urb->status == -EINPROGRESS) {
+ } else if (!urb->unlinked) {
int retval;
struct u132_ring *ring = endp->ring;
up(&u132->scheduler_lock);
@@ -1297,10 +1294,10 @@ static void u132_hcd_initial_setup_sent(void *data, struct urb *urb, u8 *buf,
u132_hcd_giveback_urb(u132, endp, urb, retval);
return;
} else {
- dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
- "s=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+ "unlinked=%d\n", urb, urb->unlinked);
up(&u132->scheduler_lock);
- u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
return;
}
}
@@ -1805,10 +1802,10 @@ static void u132_hcd_stop(struct usb_hcd *hcd)
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
} else {
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
msleep(100);
u132_power(u132, 0);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
}
}
@@ -1830,7 +1827,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
(pdev->dev.platform_data))->vendor;
u16 device = ((struct u132_platform_data *)
(pdev->dev.platform_data))->device;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
msleep(10);
if (vendor == PCI_VENDOR_ID_AMD && device == 0x740c) {
u132->flags = OHCI_QUIRK_AMD756;
@@ -1845,7 +1842,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
u132->going = 1;
}
msleep(100);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
} else {
dev_err(&u132->platform_dev->dev, "platform_device missing\n");
@@ -1865,32 +1862,44 @@ static int u132_hcd_reset(struct usb_hcd *hcd)
return -ESHUTDOWN;
} else {
int retval;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
retval = u132_init(u132);
if (retval) {
u132_disable(u132);
u132->going = 1;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
}
}
static int create_endpoint_and_queue_int(struct u132 *u132,
- struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb,
+ struct u132_udev *udev, struct urb *urb,
struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
gfp_t mem_flags)
{
struct u132_ring *ring;
unsigned long irqs;
- u8 endp_number = ++u132->num_endpoints;
- struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
- kmalloc(sizeof(struct u132_endp), mem_flags);
+ int rc;
+ u8 endp_number;
+ struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
if (!endp) {
return -ENOMEM;
}
+
+ spin_lock_init(&endp->queue_lock.slock);
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+ if (rc) {
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ kfree(endp);
+ return rc;
+ }
+
+ endp_number = ++u132->num_endpoints;
+ urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
- spin_lock_init(&endp->queue_lock.slock);
INIT_LIST_HEAD(&endp->urb_more);
ring = endp->ring = &u132->ring[0];
if (ring->curr_endp) {
@@ -1906,7 +1915,7 @@ static int create_endpoint_and_queue_int(struct u132 *u132,
endp->delayed = 0;
endp->endp_number = endp_number;
endp->u132 = u132;
- endp->hep = hep;
+ endp->hep = urb->ep;
endp->pipetype = usb_pipetype(urb->pipe);
u132_endp_init_kref(u132, endp);
if (usb_pipein(urb->pipe)) {
@@ -1925,7 +1934,6 @@ static int create_endpoint_and_queue_int(struct u132 *u132,
u132_udev_get_kref(u132, udev);
}
urb->hcpriv = u132;
- spin_lock_irqsave(&endp->queue_lock.slock, irqs);
endp->delayed = 1;
endp->jiffies = jiffies + msecs_to_jiffies(urb->interval);
endp->udev_number = address;
@@ -1940,8 +1948,8 @@ static int create_endpoint_and_queue_int(struct u132 *u132,
return 0;
}
-static int queue_int_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
- struct usb_host_endpoint *hep, struct urb *urb,
+static int queue_int_on_old_endpoint(struct u132 *u132,
+ struct u132_udev *udev, struct urb *urb,
struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
u8 usb_endp, u8 address)
{
@@ -1965,21 +1973,33 @@ static int queue_int_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
}
static int create_endpoint_and_queue_bulk(struct u132 *u132,
- struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb,
+ struct u132_udev *udev, struct urb *urb,
struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
gfp_t mem_flags)
{
int ring_number;
struct u132_ring *ring;
unsigned long irqs;
- u8 endp_number = ++u132->num_endpoints;
- struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
- kmalloc(sizeof(struct u132_endp), mem_flags);
+ int rc;
+ u8 endp_number;
+ struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
if (!endp) {
return -ENOMEM;
}
+
+ spin_lock_init(&endp->queue_lock.slock);
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+ if (rc) {
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ kfree(endp);
+ return rc;
+ }
+
+ endp_number = ++u132->num_endpoints;
+ urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
- spin_lock_init(&endp->queue_lock.slock);
INIT_LIST_HEAD(&endp->urb_more);
endp->dequeueing = 0;
endp->edset_flush = 0;
@@ -1987,7 +2007,7 @@ static int create_endpoint_and_queue_bulk(struct u132 *u132,
endp->delayed = 0;
endp->endp_number = endp_number;
endp->u132 = u132;
- endp->hep = hep;
+ endp->hep = urb->ep;
endp->pipetype = usb_pipetype(urb->pipe);
u132_endp_init_kref(u132, endp);
if (usb_pipein(urb->pipe)) {
@@ -2016,7 +2036,6 @@ static int create_endpoint_and_queue_bulk(struct u132 *u132,
}
ring->length += 1;
urb->hcpriv = u132;
- spin_lock_irqsave(&endp->queue_lock.slock, irqs);
endp->udev_number = address;
endp->usb_addr = usb_addr;
endp->usb_endp = usb_endp;
@@ -2030,7 +2049,7 @@ static int create_endpoint_and_queue_bulk(struct u132 *u132,
}
static int queue_bulk_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
- struct usb_host_endpoint *hep, struct urb *urb,
+ struct urb *urb,
struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
u8 usb_endp, u8 address)
{
@@ -2052,19 +2071,32 @@ static int queue_bulk_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
}
static int create_endpoint_and_queue_control(struct u132 *u132,
- struct usb_host_endpoint *hep, struct urb *urb,
+ struct urb *urb,
struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp,
gfp_t mem_flags)
{
struct u132_ring *ring;
- u8 endp_number = ++u132->num_endpoints;
- struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
- kmalloc(sizeof(struct u132_endp), mem_flags);
+ unsigned long irqs;
+ int rc;
+ u8 endp_number;
+ struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
if (!endp) {
return -ENOMEM;
}
+
+ spin_lock_init(&endp->queue_lock.slock);
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+ if (rc) {
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ kfree(endp);
+ return rc;
+ }
+
+ endp_number = ++u132->num_endpoints;
+ urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
- spin_lock_init(&endp->queue_lock.slock);
INIT_LIST_HEAD(&endp->urb_more);
ring = endp->ring = &u132->ring[0];
if (ring->curr_endp) {
@@ -2080,11 +2112,10 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
endp->delayed = 0;
endp->endp_number = endp_number;
endp->u132 = u132;
- endp->hep = hep;
+ endp->hep = urb->ep;
u132_endp_init_kref(u132, endp);
u132_endp_get_kref(u132, endp);
if (usb_addr == 0) {
- unsigned long irqs;
u8 address = u132->addr[usb_addr].address;
struct u132_udev *udev = &u132->udev[address];
endp->udev_number = address;
@@ -2098,7 +2129,6 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
udev->endp_number_in[usb_endp] = endp_number;
udev->endp_number_out[usb_endp] = endp_number;
urb->hcpriv = u132;
- spin_lock_irqsave(&endp->queue_lock.slock, irqs);
endp->queue_size = 1;
endp->queue_last = 0;
endp->queue_next = 0;
@@ -2107,7 +2137,6 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
u132_endp_queue_work(u132, endp, 0);
return 0;
} else { /*(usb_addr > 0) */
- unsigned long irqs;
u8 address = u132->addr[usb_addr].address;
struct u132_udev *udev = &u132->udev[address];
endp->udev_number = address;
@@ -2121,7 +2150,6 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
udev->endp_number_in[usb_endp] = endp_number;
udev->endp_number_out[usb_endp] = endp_number;
urb->hcpriv = u132;
- spin_lock_irqsave(&endp->queue_lock.slock, irqs);
endp->queue_size = 1;
endp->queue_last = 0;
endp->queue_next = 0;
@@ -2133,7 +2161,7 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
}
static int queue_control_on_old_endpoint(struct u132 *u132,
- struct usb_host_endpoint *hep, struct urb *urb,
+ struct urb *urb,
struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
u8 usb_endp)
{
@@ -2233,8 +2261,8 @@ static int queue_control_on_old_endpoint(struct u132 *u132,
}
}
-static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
- struct urb *urb, gfp_t mem_flags)
+static int u132_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
{
struct u132 *u132 = hcd_to_u132(hcd);
if (irqs_disabled()) {
@@ -2249,8 +2277,8 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
, u132->going);
return -ENODEV;
} else if (u132->going > 0) {
- dev_err(&u132->platform_dev->dev, "device is being removed urb="
- "%p status=%d\n", urb, urb->status);
+ dev_err(&u132->platform_dev->dev, "device is being removed "
+ "urb=%p\n", urb);
return -ESHUTDOWN;
} else {
u8 usb_addr = usb_pipedevice(urb->pipe);
@@ -2259,16 +2287,24 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
u8 address = u132->addr[usb_addr].address;
struct u132_udev *udev = &u132->udev[address];
- struct u132_endp *endp = hep->hcpriv;
+ struct u132_endp *endp = urb->ep->hcpriv;
urb->actual_length = 0;
if (endp) {
unsigned long irqs;
int retval;
spin_lock_irqsave(&endp->queue_lock.slock,
irqs);
- retval = queue_int_on_old_endpoint(u132, udev,
- hep, urb, usb_dev, endp, usb_addr,
- usb_endp, address);
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval == 0) {
+ retval = queue_int_on_old_endpoint(
+ u132, udev, urb,
+ usb_dev, endp,
+ usb_addr, usb_endp,
+ address);
+ if (retval)
+ usb_hcd_unlink_urb_from_ep(
+ hcd, urb);
+ }
spin_unlock_irqrestore(&endp->queue_lock.slock,
irqs);
if (retval) {
@@ -2283,8 +2319,8 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
return -EINVAL;
} else { /*(endp == NULL) */
return create_endpoint_and_queue_int(u132, udev,
- hep, urb, usb_dev, usb_addr, usb_endp,
- address, mem_flags);
+ urb, usb_dev, usb_addr,
+ usb_endp, address, mem_flags);
}
} else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
dev_err(&u132->platform_dev->dev, "the hardware does no"
@@ -2293,16 +2329,24 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
} else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
u8 address = u132->addr[usb_addr].address;
struct u132_udev *udev = &u132->udev[address];
- struct u132_endp *endp = hep->hcpriv;
+ struct u132_endp *endp = urb->ep->hcpriv;
urb->actual_length = 0;
if (endp) {
unsigned long irqs;
int retval;
spin_lock_irqsave(&endp->queue_lock.slock,
irqs);
- retval = queue_bulk_on_old_endpoint(u132, udev,
- hep, urb, usb_dev, endp, usb_addr,
- usb_endp, address);
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval == 0) {
+ retval = queue_bulk_on_old_endpoint(
+ u132, udev, urb,
+ usb_dev, endp,
+ usb_addr, usb_endp,
+ address);
+ if (retval)
+ usb_hcd_unlink_urb_from_ep(
+ hcd, urb);
+ }
spin_unlock_irqrestore(&endp->queue_lock.slock,
irqs);
if (retval) {
@@ -2315,10 +2359,10 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
return -EINVAL;
} else
return create_endpoint_and_queue_bulk(u132,
- udev, hep, urb, usb_dev, usb_addr,
+ udev, urb, usb_dev, usb_addr,
usb_endp, address, mem_flags);
} else {
- struct u132_endp *endp = hep->hcpriv;
+ struct u132_endp *endp = urb->ep->hcpriv;
u16 urb_size = 8;
u8 *b = urb->setup_packet;
int i = 0;
@@ -2341,9 +2385,16 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
int retval;
spin_lock_irqsave(&endp->queue_lock.slock,
irqs);
- retval = queue_control_on_old_endpoint(u132,
- hep, urb, usb_dev, endp, usb_addr,
- usb_endp);
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval == 0) {
+ retval = queue_control_on_old_endpoint(
+ u132, urb, usb_dev,
+ endp, usb_addr,
+ usb_endp);
+ if (retval)
+ usb_hcd_unlink_urb_from_ep(
+ hcd, urb);
+ }
spin_unlock_irqrestore(&endp->queue_lock.slock,
irqs);
if (retval) {
@@ -2356,7 +2407,7 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
return -EINVAL;
} else
return create_endpoint_and_queue_control(u132,
- hep, urb, usb_dev, usb_addr, usb_endp,
+ urb, usb_dev, usb_addr, usb_endp,
mem_flags);
}
}
@@ -2375,8 +2426,7 @@ static int dequeue_from_overflow_chain(struct u132 *u132,
list_del(scan);
endp->queue_size -= 1;
urb->error_count = 0;
- urb->hcpriv = NULL;
- usb_hcd_giveback_urb(hcd, urb);
+ usb_hcd_giveback_urb(hcd, urb, 0);
return 0;
} else
continue;
@@ -2391,10 +2441,17 @@ static int dequeue_from_overflow_chain(struct u132 *u132,
}
static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
- struct urb *urb)
+ struct urb *urb, int status)
{
unsigned long irqs;
+ int rc;
+
spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ rc = usb_hcd_check_unlink_urb(u132_to_hcd(u132), urb, status);
+ if (rc) {
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ return rc;
+ }
if (endp->queue_size == 0) {
dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]"
"=%p ring[%d] %c%c usb_endp=%d usb_addr=%d\n", urb,
@@ -2410,11 +2467,10 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
endp->edset_flush = 1;
u132_endp_queue_work(u132, endp, 0);
spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
- urb->hcpriv = NULL;
return 0;
} else {
spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
- u132_hcd_abandon_urb(u132, endp, urb, urb->status);
+ u132_hcd_abandon_urb(u132, endp, urb, status);
return 0;
}
} else {
@@ -2439,6 +2495,8 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
}
if (urb_slot) {
struct usb_hcd *hcd = u132_to_hcd(u132);
+
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
endp->queue_size -= 1;
if (list_empty(&endp->urb_more)) {
spin_unlock_irqrestore(&endp->queue_lock.slock,
@@ -2453,8 +2511,7 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
irqs);
kfree(urbq);
} urb->error_count = 0;
- urb->hcpriv = NULL;
- usb_hcd_giveback_urb(hcd, urb);
+ usb_hcd_giveback_urb(hcd, urb, status);
return 0;
} else if (list_empty(&endp->urb_more)) {
dev_err(&u132->platform_dev->dev, "urb=%p not found in "
@@ -2468,7 +2525,10 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
return -EINVAL;
} else {
- int retval = dequeue_from_overflow_chain(u132, endp,
+ int retval;
+
+ usb_hcd_unlink_urb_from_ep(u132_to_hcd(u132), urb);
+ retval = dequeue_from_overflow_chain(u132, endp,
urb);
spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
return retval;
@@ -2476,7 +2536,7 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
}
}
-static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct u132 *u132 = hcd_to_u132(hcd);
if (u132->going > 2) {
@@ -2491,11 +2551,11 @@ static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
if (usb_pipein(urb->pipe)) {
u8 endp_number = udev->endp_number_in[usb_endp];
struct u132_endp *endp = u132->endp[endp_number - 1];
- return u132_endp_urb_dequeue(u132, endp, urb);
+ return u132_endp_urb_dequeue(u132, endp, urb, status);
} else {
u8 endp_number = udev->endp_number_out[usb_endp];
struct u132_endp *endp = u132->endp[endp_number - 1];
- return u132_endp_urb_dequeue(u132, endp, urb);
+ return u132_endp_urb_dequeue(u132, endp, urb, status);
}
}
}
@@ -2805,7 +2865,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
return -ESHUTDOWN;
} else {
int retval = 0;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
switch (typeReq) {
case ClearHubFeature:
switch (wValue) {
@@ -2868,7 +2928,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
stall:retval = -EPIPE;
break;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
}
}
@@ -3004,7 +3064,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
dev_err(&u132->platform_dev->dev, "removing device u132"
".%d\n", u132->sequence_num);
msleep(100);
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
u132_monitor_cancel_work(u132);
while (rings-- > 0) {
struct u132_ring *ring = &u132->ring[rings];
@@ -3017,7 +3077,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
u132->going += 1;
printk(KERN_INFO "removing device u132.%d\n",
u132->sequence_num);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
usb_remove_hcd(hcd);
u132_u132_put_kref(u132);
return 0;
@@ -3037,7 +3097,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
u132->platform_dev = pdev;
u132->power = 0;
u132->reset = 0;
- init_MUTEX(&u132->sw_lock);
+ mutex_init(&u132->sw_lock);
init_MUTEX(&u132->scheduler_lock);
while (rings-- > 0) {
struct u132_ring *ring = &u132->ring[rings];
@@ -3047,7 +3107,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
ring->curr_endp = NULL;
INIT_DELAYED_WORK(&ring->scheduler,
u132_hcd_ring_work_scheduler);
- } down(&u132->sw_lock);
+ } mutex_lock(&u132->sw_lock);
INIT_DELAYED_WORK(&u132->monitor, u132_hcd_monitor_work);
while (ports-- > 0) {
struct u132_port *port = &u132->port[ports];
@@ -3077,7 +3137,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
while (endps-- > 0) {
u132->endp[endps] = NULL;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return;
}
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 1497371583b9..20cc58b97807 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -120,8 +120,8 @@ static int uhci_show_urbp(struct urb_priv *urbp, char *buf, int len, int space)
out += sprintf(out, "%s%s", ptype, (urbp->fsbr ? " FSBR" : ""));
out += sprintf(out, " Actlen=%d", urbp->urb->actual_length);
- if (urbp->urb->status != -EINPROGRESS)
- out += sprintf(out, " Status=%d", urbp->urb->status);
+ if (urbp->urb->unlinked)
+ out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked);
out += sprintf(out, "\n");
i = nactive = ninactive = 0;
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 1b3d23406ac4..340d6ed3e6e9 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -146,7 +146,6 @@ struct uhci_qh {
short phase; /* Between 0 and period-1 */
short load; /* Periodic time requirement, in us */
unsigned int iso_frame; /* Frame # for iso_packet_desc */
- int iso_status; /* Status for Isochronous URBs */
int state; /* QH_STATE_xxx; see above */
int type; /* Queue type (control, bulk, etc) */
@@ -457,21 +456,6 @@ struct urb_priv {
};
-/*
- * Locking in uhci.c
- *
- * Almost everything relating to the hardware schedule and processing
- * of URBs is protected by uhci->lock. urb->status is protected by
- * urb->lock; that's the one exception.
- *
- * To prevent deadlocks, never lock uhci->lock while holding urb->lock.
- * The safe order of locking is:
- *
- * #1 uhci->lock
- * #2 urb->lock
- */
-
-
/* Some special IDs */
#define PCI_VENDOR_ID_GENESYS 0x17a0
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 3bb908ca38e9..e5d60d5b105a 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -757,7 +757,6 @@ static void uhci_free_urb_priv(struct uhci_hcd *uhci,
uhci_free_td(uhci, td);
}
- urbp->urb->hcpriv = NULL;
kmem_cache_free(uhci_up_cachep, urbp);
}
@@ -1324,7 +1323,6 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
if (list_empty(&qh->queue)) {
qh->iso_packet_desc = &urb->iso_frame_desc[0];
qh->iso_frame = urb->start_frame;
- qh->iso_status = 0;
}
qh->skel = SKEL_ISO;
@@ -1361,22 +1359,18 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
qh->iso_packet_desc->actual_length = actlength;
qh->iso_packet_desc->status = status;
}
-
- if (status) {
+ if (status)
urb->error_count++;
- qh->iso_status = status;
- }
uhci_remove_td_from_urbp(td);
uhci_free_td(uhci, td);
qh->iso_frame += qh->period;
++qh->iso_packet_desc;
}
- return qh->iso_status;
+ return 0;
}
static int uhci_urb_enqueue(struct usb_hcd *hcd,
- struct usb_host_endpoint *hep,
struct urb *urb, gfp_t mem_flags)
{
int ret;
@@ -1387,19 +1381,19 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd,
spin_lock_irqsave(&uhci->lock, flags);
- ret = urb->status;
- if (ret != -EINPROGRESS) /* URB already unlinked! */
- goto done;
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto done_not_linked;
ret = -ENOMEM;
urbp = uhci_alloc_urb_priv(uhci, urb);
if (!urbp)
goto done;
- if (hep->hcpriv)
- qh = (struct uhci_qh *) hep->hcpriv;
+ if (urb->ep->hcpriv)
+ qh = urb->ep->hcpriv;
else {
- qh = uhci_alloc_qh(uhci, urb->dev, hep);
+ qh = uhci_alloc_qh(uhci, urb->dev, urb->ep);
if (!qh)
goto err_no_qh;
}
@@ -1440,27 +1434,29 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd,
err_submit_failed:
if (qh->state == QH_STATE_IDLE)
uhci_make_qh_idle(uhci, qh); /* Reclaim unused QH */
-
err_no_qh:
uhci_free_urb_priv(uhci, urbp);
-
done:
+ if (ret)
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+done_not_linked:
spin_unlock_irqrestore(&uhci->lock, flags);
return ret;
}
-static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned long flags;
- struct urb_priv *urbp;
struct uhci_qh *qh;
+ int rc;
spin_lock_irqsave(&uhci->lock, flags);
- urbp = urb->hcpriv;
- if (!urbp) /* URB was never linked! */
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
goto done;
- qh = urbp->qh;
+
+ qh = ((struct urb_priv *) urb->hcpriv)->qh;
/* Remove Isochronous TDs from the frame list ASAP */
if (qh->type == USB_ENDPOINT_XFER_ISOC) {
@@ -1477,14 +1473,14 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
done:
spin_unlock_irqrestore(&uhci->lock, flags);
- return 0;
+ return rc;
}
/*
* Finish unlinking an URB and give it back
*/
static void uhci_giveback_urb(struct uhci_hcd *uhci, struct uhci_qh *qh,
- struct urb *urb)
+ struct urb *urb, int status)
__releases(uhci->lock)
__acquires(uhci->lock)
{
@@ -1497,13 +1493,6 @@ __acquires(uhci->lock)
* unlinked first. Regardless, don't confuse people with a
* negative length. */
urb->actual_length = max(urb->actual_length, 0);
-
- /* Report erroneous short transfers */
- if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
- urb->actual_length <
- urb->transfer_buffer_length &&
- urb->status == 0))
- urb->status = -EREMOTEIO;
}
/* When giving back the first URB in an Isochronous queue,
@@ -1516,7 +1505,6 @@ __acquires(uhci->lock)
qh->iso_packet_desc = &nurb->iso_frame_desc[0];
qh->iso_frame = nurb->start_frame;
- qh->iso_status = 0;
}
/* Take the URB off the QH's queue. If the queue is now empty,
@@ -1529,9 +1517,10 @@ __acquires(uhci->lock)
}
uhci_free_urb_priv(uhci, urbp);
+ usb_hcd_unlink_urb_from_ep(uhci_to_hcd(uhci), urb);
spin_unlock(&uhci->lock);
- usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb);
+ usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb, status);
spin_lock(&uhci->lock);
/* If the queue is now empty, we can unlink the QH and give up its
@@ -1567,24 +1556,17 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
if (status == -EINPROGRESS)
break;
- spin_lock(&urb->lock);
- if (urb->status == -EINPROGRESS) /* Not dequeued */
- urb->status = status;
- else
- status = ECONNRESET; /* Not -ECONNRESET */
- spin_unlock(&urb->lock);
-
/* Dequeued but completed URBs can't be given back unless
* the QH is stopped or has finished unlinking. */
- if (status == ECONNRESET) {
+ if (urb->unlinked) {
if (QH_FINISHED_UNLINKING(qh))
qh->is_stopped = 1;
else if (!qh->is_stopped)
return;
}
- uhci_giveback_urb(uhci, qh, urb);
- if (status < 0 && qh->type != USB_ENDPOINT_XFER_ISOC)
+ uhci_giveback_urb(uhci, qh, urb, status);
+ if (status < 0)
break;
}
@@ -1599,7 +1581,7 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
restart:
list_for_each_entry(urbp, &qh->queue, node) {
urb = urbp->urb;
- if (urb->status != -EINPROGRESS) {
+ if (urb->unlinked) {
/* Fix up the TD links and save the toggles for
* non-Isochronous queues. For Isochronous queues,
@@ -1608,7 +1590,7 @@ restart:
qh->is_stopped = 0;
return;
}
- uhci_giveback_urb(uhci, qh, urb);
+ uhci_giveback_urb(uhci, qh, urb, 0);
goto restart;
}
}
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index e9fdbc8997b3..5131cbfb2f52 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -188,7 +188,8 @@ static void adu_interrupt_in_callback(struct urb *urb)
spin_lock(&dev->buflock);
if (status != 0) {
- if ((status != -ENOENT) && (status != -ECONNRESET)) {
+ if ((status != -ENOENT) && (status != -ECONNRESET) &&
+ (status != -ESHUTDOWN)) {
dbg(1," %s : nonzero status received: %d",
__FUNCTION__, status);
}
diff --git a/drivers/usb/misc/berry_charge.c b/drivers/usb/misc/berry_charge.c
index 92c1d2768df9..24e2dc3148a4 100644
--- a/drivers/usb/misc/berry_charge.c
+++ b/drivers/usb/misc/berry_charge.c
@@ -71,7 +71,7 @@ static int magic_charge(struct usb_device *udev)
if (retval != 2) {
dev_err(&udev->dev, "First magic command failed: %d.\n",
retval);
- return retval;
+ goto exit;
}
dbg(&udev->dev, "Sending second magic command\n");
@@ -80,7 +80,7 @@ static int magic_charge(struct usb_device *udev)
if (retval != 0) {
dev_err(&udev->dev, "Second magic command failed: %d.\n",
retval);
- return retval;
+ goto exit;
}
dbg(&udev->dev, "Calling set_configuration\n");
@@ -88,6 +88,8 @@ static int magic_charge(struct usb_device *udev)
if (retval)
dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
+exit:
+ kfree(dummy_buffer);
return retval;
}
@@ -112,6 +114,7 @@ static int magic_dual_mode(struct usb_device *udev)
if (retval)
dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
+ kfree(dummy_buffer);
return retval;
}
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 538b535e955b..d3d8cd6ff103 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -2777,12 +2777,14 @@ static int ftdi_elan_probe(struct usb_interface *interface,
size_t buffer_size;
int i;
int retval = -ENOMEM;
- struct usb_ftdi *ftdi = kmalloc(sizeof(struct usb_ftdi), GFP_KERNEL);
- if (ftdi == NULL) {
+ struct usb_ftdi *ftdi;
+
+ ftdi = kzalloc(sizeof(struct usb_ftdi), GFP_KERNEL);
+ if (!ftdi) {
printk(KERN_ERR "Out of memory\n");
return -ENOMEM;
}
- memset(ftdi, 0x00, sizeof(struct usb_ftdi));
+
mutex_lock(&ftdi_module_lock);
list_add_tail(&ftdi->ftdi_list, &ftdi_static_list);
ftdi->sequence_num = ++ftdi_instances;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index b64ca91d9b02..9244d067cec1 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -32,7 +32,7 @@
* * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
*
*/
@@ -962,12 +962,12 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
packet.address = 0x00000194;
packet.data = addr;
ret = sisusb_send_bridge_packet(sisusb, 10,
- &packet, 0);
+ &packet, 0);
packet.header = 0x001f;
packet.address = 0x00000190;
packet.data = (length & ~3);
ret |= sisusb_send_bridge_packet(sisusb, 10,
- &packet, 0);
+ &packet, 0);
if (sisusb->flagb0 != 0x16) {
packet.header = 0x001f;
packet.address = 0x00000180;
@@ -1003,23 +1003,17 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
if (ret) {
msgcount++;
if (msgcount < 500)
- printk(KERN_ERR
- "sisusbvga[%d]: Wrote %zd of "
- "%d bytes, error %d\n",
- sisusb->minor, *bytes_written,
- length, ret);
+ dev_err(&sisusb->sisusb_dev->dev, "Wrote %zd of %d bytes, error %d\n",
+ *bytes_written, length, ret);
else if (msgcount == 500)
- printk(KERN_ERR
- "sisusbvga[%d]: Too many errors"
- ", logging stopped\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Too many errors, logging stopped\n");
}
addr += (*bytes_written);
length -= (*bytes_written);
}
if (ret)
- break;
+ break;
}
@@ -1261,51 +1255,10 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
addr += 4;
length -= 4;
}
-#if 0 /* That does not work, as EP 2 is an OUT EP! */
- default:
- CLEARPACKET(&packet);
- packet.header = 0x001f;
- packet.address = 0x000001a0;
- packet.data = 0x00000006;
- ret |= sisusb_send_bridge_packet(sisusb, 10,
- &packet, 0);
- packet.header = 0x001f;
- packet.address = 0x000001b0;
- packet.data = (length & ~3) | 0x40000000;
- ret |= sisusb_send_bridge_packet(sisusb, 10,
- &packet, 0);
- packet.header = 0x001f;
- packet.address = 0x000001b4;
- packet.data = addr;
- ret |= sisusb_send_bridge_packet(sisusb, 10,
- &packet, 0);
- packet.header = 0x001f;
- packet.address = 0x000001a4;
- packet.data = 0x00000001;
- ret |= sisusb_send_bridge_packet(sisusb, 10,
- &packet, 0);
- if (userbuffer) {
- ret |= sisusb_recv_bulk_msg(sisusb,
- SISUSB_EP_GFX_BULK_IN,
- (length & ~3),
- NULL, userbuffer,
- bytes_read, 0);
- if (!ret) userbuffer += (*bytes_read);
- } else {
- ret |= sisusb_recv_bulk_msg(sisusb,
- SISUSB_EP_GFX_BULK_IN,
- (length & ~3),
- kernbuffer, NULL,
- bytes_read, 0);
- if (!ret) kernbuffer += (*bytes_read);
- }
- addr += (*bytes_read);
- length -= (*bytes_read);
-#endif
}
if (ret)
- break;
+ break;
}
return ret;
@@ -1401,22 +1354,6 @@ sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data)
return(sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data));
}
-#if 0
-
-int
-sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data)
-{
- return(sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
-}
-
-int
-sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data)
-{
- return(sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
-}
-
-#endif /* 0 */
-
int
sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
u32 dest, int length, size_t *bytes_written)
@@ -1446,10 +1383,10 @@ sisusb_testreadwrite(struct sisusb_usb_data *sisusb)
sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7, &dummy);
for(i = 1; i <= 7; i++) {
- printk(KERN_DEBUG "sisusb: rwtest %d bytes\n", i);
+ dev_dbg(&sisusb->sisusb_dev->dev, "sisusb: rwtest %d bytes\n", i);
sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i, &dummy);
for(j = 0; j < i; j++) {
- printk(KERN_DEBUG "sisusb: rwtest read[%d] = %x\n", j, destbuffer[j]);
+ dev_dbg(&sisusb->sisusb_dev->dev, "rwtest read[%d] = %x\n", j, destbuffer[j]);
}
}
}
@@ -1533,9 +1470,9 @@ sisusb_clear_vram(struct sisusb_usb_data *sisusb, u32 address, int length)
#define SETIREGAND(r,i,a) sisusb_setidxregand(sisusb, r, i, a)
#define SETIREGANDOR(r,i,a,o) sisusb_setidxregandor(sisusb, r, i, a, o)
#define READL(a,d) sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
-#define WRITEL(a,d) sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
+#define WRITEL(a,d) sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
#define READB(a,d) sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
-#define WRITEB(a,d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
+#define WRITEB(a,d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
static int
sisusb_triggersr16(struct sisusb_usb_data *sisusb, u8 ramtype)
@@ -2008,7 +1945,7 @@ sisusb_set_default_mode(struct sisusb_usb_data *sisusb, int touchengines)
SETIREG(SISSR, 0x26, 0x00);
}
- SETIREG(SISCR, 0x34, 0x44); /* we just set std mode #44 */
+ SETIREG(SISCR, 0x34, 0x44); /* we just set std mode #44 */
return ret;
}
@@ -2168,17 +2105,12 @@ sisusb_init_gfxcore(struct sisusb_usb_data *sisusb)
if (ramtype <= 1) {
ret |= sisusb_get_sdram_size(sisusb, &iret, bw, chab);
if (iret) {
- printk(KERN_ERR "sisusbvga[%d]: RAM size "
- "detection failed, "
- "assuming 8MB video RAM\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev,"RAM size detection failed, assuming 8MB video RAM\n");
ret |= SETIREG(SISSR,0x14,0x31);
/* TODO */
}
} else {
- printk(KERN_ERR "sisusbvga[%d]: DDR RAM device found, "
- "assuming 8MB video RAM\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "DDR RAM device found, assuming 8MB video RAM\n");
ret |= SETIREG(SISSR,0x14,0x31);
/* *** TODO *** */
}
@@ -2249,8 +2181,7 @@ sisusb_get_ramconfig(struct sisusb_usb_data *sisusb)
break;
}
- printk(KERN_INFO "sisusbvga[%d]: %dMB %s %s, bus width %d\n",
- sisusb->minor, (sisusb->vramsize >> 20), ramtypetext1,
+ dev_info(&sisusb->sisusb_dev->dev, "%dMB %s %s, bus width %d\n", (sisusb->vramsize >> 20), ramtypetext1,
ramtypetext2[ramtype], bw);
}
@@ -2509,11 +2440,8 @@ sisusb_open(struct inode *inode, struct file *file)
struct usb_interface *interface;
int subminor = iminor(inode);
- if (!(interface = usb_find_interface(&sisusb_driver, subminor))) {
- printk(KERN_ERR "sisusb[%d]: Failed to find interface\n",
- subminor);
+ if (!(interface = usb_find_interface(&sisusb_driver, subminor)))
return -ENODEV;
- }
if (!(sisusb = usb_get_intfdata(interface)))
return -ENODEV;
@@ -2534,18 +2462,12 @@ sisusb_open(struct inode *inode, struct file *file)
if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
if (sisusb_init_gfxdevice(sisusb, 0)) {
mutex_unlock(&sisusb->lock);
- printk(KERN_ERR
- "sisusbvga[%d]: Failed to initialize "
- "device\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
return -EIO;
}
} else {
mutex_unlock(&sisusb->lock);
- printk(KERN_ERR
- "sisusbvga[%d]: Device not attached to "
- "USB 2.0 hub\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Device not attached to USB 2.0 hub\n");
return -EIO;
}
}
@@ -2586,7 +2508,6 @@ static int
sisusb_release(struct inode *inode, struct file *file)
{
struct sisusb_usb_data *sisusb;
- int myminor;
if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
return -ENODEV;
@@ -2599,8 +2520,6 @@ sisusb_release(struct inode *inode, struct file *file)
sisusb_kill_all_busy(sisusb);
}
- myminor = sisusb->minor;
-
sisusb->isopen = 0;
file->private_data = NULL;
@@ -2942,7 +2861,7 @@ static int
sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y,
unsigned long arg)
{
- int retval, port, length;
+ int retval, port, length;
u32 address;
/* All our commands require the device
@@ -3065,12 +2984,12 @@ sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y,
static int
sisusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
+ unsigned long arg)
{
struct sisusb_usb_data *sisusb;
struct sisusb_info x;
struct sisusb_command y;
- int retval = 0;
+ int retval = 0;
u32 __user *argp = (u32 __user *)arg;
if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
@@ -3095,7 +3014,7 @@ sisusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
case SISUSB_GET_CONFIG:
- x.sisusb_id = SISUSB_ID;
+ x.sisusb_id = SISUSB_ID;
x.sisusb_version = SISUSB_VERSION;
x.sisusb_revision = SISUSB_REVISION;
x.sisusb_patchlevel = SISUSB_PATCHLEVEL;
@@ -3164,7 +3083,7 @@ static const struct file_operations usb_sisusb_fops = {
.release = sisusb_release,
.read = sisusb_read,
.write = sisusb_write,
- .llseek = sisusb_lseek,
+ .llseek = sisusb_lseek,
#ifdef SISUSB_NEW_CONFIG_COMPAT
.compat_ioctl = sisusb_compat_ioctl,
#endif
@@ -3183,17 +3102,13 @@ static int sisusb_probe(struct usb_interface *intf,
struct usb_device *dev = interface_to_usbdev(intf);
struct sisusb_usb_data *sisusb;
int retval = 0, i;
- const char *memfail =
- KERN_ERR
- "sisusbvga[%d]: Failed to allocate memory for %s buffer\n";
- printk(KERN_INFO "sisusb: USB2VGA dongle found at address %d\n",
+ dev_info(&dev->dev, "USB2VGA dongle found at address %d\n",
dev->devnum);
/* Allocate memory for our private */
if (!(sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL))) {
- printk(KERN_ERR
- "sisusb: Failed to allocate memory for private data\n");
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for private data\n");
return -ENOMEM;
}
kref_init(&sisusb->kref);
@@ -3202,8 +3117,7 @@ static int sisusb_probe(struct usb_interface *intf,
/* Register device */
if ((retval = usb_register_dev(intf, &usb_sisusb_class))) {
- printk(KERN_ERR
- "sisusb: Failed to get a minor for device %d\n",
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to get a minor for device %d\n",
dev->devnum);
retval = -ENODEV;
goto error_1;
@@ -3221,7 +3135,7 @@ static int sisusb_probe(struct usb_interface *intf,
sisusb->ibufsize = SISUSB_IBUF_SIZE;
if (!(sisusb->ibuf = usb_buffer_alloc(dev, SISUSB_IBUF_SIZE,
GFP_KERNEL, &sisusb->transfer_dma_in))) {
- printk(memfail, "input", sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for input buffer");
retval = -ENOMEM;
goto error_2;
}
@@ -3233,7 +3147,7 @@ static int sisusb_probe(struct usb_interface *intf,
GFP_KERNEL,
&sisusb->transfer_dma_out[i]))) {
if (i == 0) {
- printk(memfail, "output", sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for output buffer\n");
retval = -ENOMEM;
goto error_3;
}
@@ -3245,9 +3159,7 @@ static int sisusb_probe(struct usb_interface *intf,
/* Allocate URBs */
if (!(sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL))) {
- printk(KERN_ERR
- "sisusbvga[%d]: Failed to allocate URBs\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate URBs\n");
retval = -ENOMEM;
goto error_3;
}
@@ -3255,9 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf,
for (i = 0; i < sisusb->numobufs; i++) {
if (!(sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL))) {
- printk(KERN_ERR
- "sisusbvga[%d]: Failed to allocate URBs\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate URBs\n");
retval = -ENOMEM;
goto error_4;
}
@@ -3266,15 +3176,12 @@ static int sisusb_probe(struct usb_interface *intf,
sisusb->urbstatus[i] = 0;
}
- printk(KERN_INFO "sisusbvga[%d]: Allocated %d output buffers\n",
- sisusb->minor, sisusb->numobufs);
+ dev_info(&sisusb->sisusb_dev->dev, "Allocated %d output buffers\n", sisusb->numobufs);
#ifdef INCL_SISUSB_CON
/* Allocate our SiS_Pr */
if (!(sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL))) {
- printk(KERN_ERR
- "sisusbvga[%d]: Failed to allocate SiS_Pr\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate SiS_Pr\n");
}
#endif
@@ -3296,10 +3203,7 @@ static int sisusb_probe(struct usb_interface *intf,
ret |= register_ioctl32_conversion(SISUSB_GET_CONFIG, NULL);
ret |= register_ioctl32_conversion(SISUSB_COMMAND, NULL);
if (ret)
- printk(KERN_ERR
- "sisusbvga[%d]: Error registering ioctl32 "
- "translations\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Error registering ioctl32 translations\n");
else
sisusb->ioctl32registered = 1;
}
@@ -3315,23 +3219,17 @@ static int sisusb_probe(struct usb_interface *intf,
initscreen = 0;
#endif
if (sisusb_init_gfxdevice(sisusb, initscreen))
- printk(KERN_ERR
- "sisusbvga[%d]: Failed to early "
- "initialize device\n",
- sisusb->minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to early initialize device\n");
} else
- printk(KERN_INFO
- "sisusbvga[%d]: Not attached to USB 2.0 hub, "
- "deferring init\n",
- sisusb->minor);
+ dev_info(&sisusb->sisusb_dev->dev, "Not attached to USB 2.0 hub, deferring init\n");
sisusb->ready = 1;
#ifdef SISUSBENDIANTEST
- printk(KERN_DEBUG "sisusb: *** RWTEST ***\n");
+ dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST ***\n");
sisusb_testreadwrite(sisusb);
- printk(KERN_DEBUG "sisusb: *** RWTEST END ***\n");
+ dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST END ***\n");
#endif
#ifdef INCL_SISUSB_CON
@@ -3354,7 +3252,6 @@ error_1:
static void sisusb_disconnect(struct usb_interface *intf)
{
struct sisusb_usb_data *sisusb;
- int minor;
/* This should *not* happen */
if (!(sisusb = usb_get_intfdata(intf)))
@@ -3364,8 +3261,6 @@ static void sisusb_disconnect(struct usb_interface *intf)
sisusb_console_exit(sisusb);
#endif
- minor = sisusb->minor;
-
usb_deregister_dev(intf, &usb_sisusb_class);
mutex_lock(&sisusb->lock);
@@ -3384,10 +3279,7 @@ static void sisusb_disconnect(struct usb_interface *intf)
ret |= unregister_ioctl32_conversion(SISUSB_GET_CONFIG);
ret |= unregister_ioctl32_conversion(SISUSB_COMMAND);
if (ret) {
- printk(KERN_ERR
- "sisusbvga[%d]: Error unregistering "
- "ioctl32 translations\n",
- minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Error unregistering ioctl32 translations\n");
}
}
#endif
@@ -3400,7 +3292,7 @@ static void sisusb_disconnect(struct usb_interface *intf)
/* decrement our usage count */
kref_put(&sisusb->kref, sisusb_delete);
- printk(KERN_INFO "sisusbvga[%d]: Disconnected\n", minor);
+ dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n");
}
static struct usb_device_id sisusb_table [] = {
@@ -3424,22 +3316,12 @@ static struct usb_driver sisusb_driver = {
static int __init usb_sisusb_init(void)
{
- int retval;
#ifdef INCL_SISUSB_CON
sisusb_init_concode();
#endif
- if (!(retval = usb_register(&sisusb_driver))) {
-
- printk(KERN_INFO "sisusb: Driver version %d.%d.%d\n",
- SISUSB_VERSION, SISUSB_REVISION, SISUSB_PATCHLEVEL);
- printk(KERN_INFO
- "sisusb: Copyright (C) 2005 Thomas Winischhofer\n");
-
- }
-
- return retval;
+ return usb_register(&sisusb_driver);
}
static void __exit usb_sisusb_exit(void)
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 8e1120a64806..d2d7872cd022 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -8,29 +8,29 @@
*
* Otherwise, the following license terms apply:
*
- * * Redistribution and use in source and binary forms, with or without
- * * modification, are permitted provided that the following conditions
- * * are met:
- * * 1) Redistributions of source code must retain the above copyright
- * * notice, this list of conditions and the following disclaimer.
- * * 2) Redistributions in binary form must reproduce the above copyright
- * * notice, this list of conditions and the following disclaimer in the
- * * documentation and/or other materials provided with the distribution.
- * * 3) The name of the author may not be used to endorse or promote products
- * * derived from this software without specific prior written permission.
- * *
- * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
- * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1) Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2) Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3) The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
*
- * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
*
*/
@@ -44,16 +44,14 @@
#include <linux/mutex.h>
/* For older kernels, support for text consoles is by default
- * off. To ensable text console support, change the following:
+ * off. To enable text console support, change the following:
*/
-#if 0
-#define CONFIG_USB_SISUSBVGA_CON
-#endif
+/* #define CONFIG_USB_SISUSBVGA_CON */
/* Version Information */
#define SISUSB_VERSION 0
-#define SISUSB_REVISION 0
+#define SISUSB_REVISION 0
#define SISUSB_PATCHLEVEL 8
/* Include console and mode switching code? */
@@ -74,7 +72,7 @@
#define SISUSB_IBUF_SIZE 0x01000
#define SISUSB_OBUF_SIZE 0x10000 /* fixed */
-#define NUMOBUFS 8 /* max number of output buffers/output URBs */
+#define NUMOBUFS 8 /* max number of output buffers/output URBs */
/* About endianness:
*
@@ -93,7 +91,7 @@
*/
#ifdef __BIG_ENDIAN
-#define SISUSB_CORRECT_ENDIANNESS_PACKET(p) \
+#define SISUSB_CORRECT_ENDIANNESS_PACKET(p) \
do { \
p->header = cpu_to_le16(p->header); \
p->address = cpu_to_le32(p->address); \
@@ -105,7 +103,7 @@
struct sisusb_usb_data;
-struct sisusb_urb_context { /* urb->context for outbound bulk URBs */
+struct sisusb_urb_context { /* urb->context for outbound bulk URBs */
struct sisusb_usb_data *sisusb;
int urbindex;
int *actual_length;
@@ -116,16 +114,16 @@ struct sisusb_usb_data {
struct usb_interface *interface;
struct kref kref;
wait_queue_head_t wait_q; /* for syncind and timeouts */
- struct mutex lock; /* general race avoidance */
- unsigned int ifnum; /* interface number of the USB device */
- int minor; /* minor (for logging clarity) */
- int isopen; /* !=0 if open */
- int present; /* !=0 if device is present on the bus */
- int ready; /* !=0 if device is ready for userland */
+ struct mutex lock; /* general race avoidance */
+ unsigned int ifnum; /* interface number of the USB device */
+ int minor; /* minor (for logging clarity) */
+ int isopen; /* !=0 if open */
+ int present; /* !=0 if device is present on the bus */
+ int ready; /* !=0 if device is ready for userland */
#ifdef SISUSB_OLD_CONFIG_COMPAT
int ioctl32registered;
#endif
- int numobufs; /* number of obufs = number of out urbs */
+ int numobufs; /* number of obufs = number of out urbs */
char *obuf[NUMOBUFS], *ibuf; /* transfer buffers */
int obufsize, ibufsize;
dma_addr_t transfer_dma_out[NUMOBUFS];
@@ -136,13 +134,13 @@ struct sisusb_usb_data {
unsigned char completein;
struct sisusb_urb_context urbout_context[NUMOBUFS];
unsigned long flagb0;
- unsigned long vrambase; /* framebuffer base */
- unsigned int vramsize; /* framebuffer size (bytes) */
+ unsigned long vrambase; /* framebuffer base */
+ unsigned int vramsize; /* framebuffer size (bytes) */
unsigned long mmiobase;
unsigned int mmiosize;
unsigned long ioportbase;
- unsigned char devinit; /* device initialized? */
- unsigned char gfxinit; /* graphics core initialized? */
+ unsigned char devinit; /* device initialized? */
+ unsigned char gfxinit; /* graphics core initialized? */
unsigned short chipid, chipvendor;
unsigned short chiprevision;
#ifdef INCL_SISUSB_CON
@@ -152,7 +150,7 @@ struct sisusb_usb_data {
int haveconsole, con_first, con_last;
int havethisconsole[MAX_NR_CONSOLES];
int textmodedestroyed;
- unsigned int sisusb_num_columns; /* real number, not vt's idea */
+ unsigned int sisusb_num_columns; /* real number, not vt's idea */
int cur_start_addr, con_rolled_over;
int sisusb_cursor_loc, bad_cursor_pos;
int sisusb_cursor_size_from;
@@ -197,7 +195,7 @@ struct sisusb_packet {
unsigned short header;
u32 address;
u32 data;
-} __attribute__((__packed__));
+} __attribute__ ((__packed__));
#define CLEARPACKET(packet) memset(packet, 0, 10)
@@ -265,36 +263,36 @@ struct sisusb_packet {
/* Structure argument for SISUSB_GET_INFO ioctl */
struct sisusb_info {
- __u32 sisusb_id; /* for identifying sisusb */
-#define SISUSB_ID 0x53495355 /* Identify myself with 'SISU' */
- __u8 sisusb_version;
- __u8 sisusb_revision;
- __u8 sisusb_patchlevel;
- __u8 sisusb_gfxinit; /* graphics core initialized? */
+ __u32 sisusb_id; /* for identifying sisusb */
+#define SISUSB_ID 0x53495355 /* Identify myself with 'SISU' */
+ __u8 sisusb_version;
+ __u8 sisusb_revision;
+ __u8 sisusb_patchlevel;
+ __u8 sisusb_gfxinit; /* graphics core initialized? */
- __u32 sisusb_vrambase;
- __u32 sisusb_mmiobase;
- __u32 sisusb_iobase;
- __u32 sisusb_pcibase;
+ __u32 sisusb_vrambase;
+ __u32 sisusb_mmiobase;
+ __u32 sisusb_iobase;
+ __u32 sisusb_pcibase;
- __u32 sisusb_vramsize; /* framebuffer size in bytes */
+ __u32 sisusb_vramsize; /* framebuffer size in bytes */
- __u32 sisusb_minor;
+ __u32 sisusb_minor;
- __u32 sisusb_fbdevactive; /* != 0 if framebuffer device active */
+ __u32 sisusb_fbdevactive; /* != 0 if framebuffer device active */
- __u32 sisusb_conactive; /* != 0 if console driver active */
+ __u32 sisusb_conactive; /* != 0 if console driver active */
- __u8 sisusb_reserved[28]; /* for future use */
+ __u8 sisusb_reserved[28]; /* for future use */
};
struct sisusb_command {
- __u8 operation; /* see below */
- __u8 data0; /* operation dependent */
- __u8 data1; /* operation dependent */
- __u8 data2; /* operation dependent */
- __u32 data3; /* operation dependent */
- __u32 data4; /* for future use */
+ __u8 operation; /* see below */
+ __u8 data0; /* operation dependent */
+ __u8 data1; /* operation dependent */
+ __u8 data2; /* operation dependent */
+ __u32 data3; /* operation dependent */
+ __u32 data4; /* for future use */
};
#define SUCMD_GET 0x01 /* for all: data0 = index, data3 = port */
@@ -306,7 +304,7 @@ struct sisusb_command {
#define SUCMD_CLRSCR 0x07 /* data0:1:2 = length, data3 = address */
-#define SUCMD_HANDLETEXTMODE 0x08 /* Reset/destroy text mode */
+#define SUCMD_HANDLETEXTMODE 0x08 /* Reset/destroy text mode */
#define SUCMD_SETMODE 0x09 /* Set a display mode (data3 = SiS mode) */
#define SUCMD_SETVESAMODE 0x0a /* Set a display mode (data3 = VESA mode) */
@@ -315,6 +313,4 @@ struct sisusb_command {
#define SISUSB_GET_CONFIG_SIZE _IOR(0xF3,0x3E,__u32)
#define SISUSB_GET_CONFIG _IOR(0xF3,0x3F,struct sisusb_info)
-
#endif /* SISUSB_H */
-
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index 8d0edc867f33..43722e5a49d1 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -52,6 +52,7 @@
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/fs.h>
+#include <linux/usb.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/string.h>
@@ -373,14 +374,6 @@ sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
return;
/* sisusb->lock is down */
-
- /* Don't need to put the character into buffer ourselves,
- * because the vt does this BEFORE calling us.
- */
-#if 0
- sisusbcon_writew(ch, SISUSB_VADDR(x, y));
-#endif
-
if (sisusb_is_inactive(c, sisusb)) {
mutex_unlock(&sisusb->lock);
return;
@@ -490,10 +483,6 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
struct sisusb_usb_data *sisusb;
ssize_t written;
int cols, length;
-#if 0
- u16 *src, *dest;
- int i;
-#endif
if (width <= 0 || height <= 0)
return;
@@ -505,41 +494,6 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
cols = sisusb->sisusb_num_columns;
- /* Don't need to move data outselves, because
- * vt does this BEFORE calling us.
- * This is only used by vt's insert/deletechar.
- */
-#if 0
- if (sx == 0 && dx == 0 && width >= c->vc_cols && width <= cols) {
-
- sisusbcon_memmovew(SISUSB_VADDR(0, dy), SISUSB_VADDR(0, sy),
- height * width * 2);
-
- } else if (dy < sy || (dy == sy && dx < sx)) {
-
- src = SISUSB_VADDR(sx, sy);
- dest = SISUSB_VADDR(dx, dy);
-
- for (i = height; i > 0; i--) {
- sisusbcon_memmovew(dest, src, width * 2);
- src += cols;
- dest += cols;
- }
-
- } else {
-
- src = SISUSB_VADDR(sx, sy + height - 1);
- dest = SISUSB_VADDR(dx, dy + height - 1);
-
- for (i = height; i > 0; i--) {
- sisusbcon_memmovew(dest, src, width * 2);
- src -= cols;
- dest -= cols;
- }
-
- }
-#endif
-
if (sisusb_is_inactive(c, sisusb)) {
mutex_unlock(&sisusb->lock);
return;
@@ -584,7 +538,7 @@ sisusbcon_switch(struct vc_data *c)
*/
if (c->vc_origin == (unsigned long)c->vc_screenbuf) {
mutex_unlock(&sisusb->lock);
- printk(KERN_DEBUG "sisusb: ASSERT ORIGIN != SCREENBUF!\n");
+ dev_dbg(&sisusb->sisusb_dev->dev, "ASSERT ORIGIN != SCREENBUF!\n");
return 0;
}
@@ -1475,7 +1429,7 @@ static const struct consw sisusb_dummy_con = {
int
sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
{
- int i, ret, minor = sisusb->minor;
+ int i, ret;
mutex_lock(&sisusb->lock);
@@ -1508,9 +1462,7 @@ sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
/* Set up text mode (and upload default font) */
if (sisusb_reset_text_mode(sisusb, 1)) {
mutex_unlock(&sisusb->lock);
- printk(KERN_ERR
- "sisusbvga[%d]: Failed to set up text mode\n",
- minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to set up text mode\n");
return 1;
}
@@ -1531,9 +1483,7 @@ sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
/* Allocate screen buffer */
if (!(sisusb->scrbuf = (unsigned long)vmalloc(sisusb->scrbuf_size))) {
mutex_unlock(&sisusb->lock);
- printk(KERN_ERR
- "sisusbvga[%d]: Failed to allocate screen buffer\n",
- minor);
+ dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate screen buffer\n");
return 1;
}
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index 9b30f8962814..273de5d0934e 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -32,7 +32,7 @@
* * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
*
*/
@@ -55,109 +55,18 @@
/* POINTER INITIALIZATION */
/*********************************************/
-static void
-SiSUSB_InitPtr(struct SiS_Private *SiS_Pr)
+static void SiSUSB_InitPtr(struct SiS_Private *SiS_Pr)
{
- SiS_Pr->SiS_ModeResInfo = SiSUSB_ModeResInfo;
- SiS_Pr->SiS_StandTable = SiSUSB_StandTable;
-
- SiS_Pr->SiS_SModeIDTable = SiSUSB_SModeIDTable;
- SiS_Pr->SiS_EModeIDTable = SiSUSB_EModeIDTable;
- SiS_Pr->SiS_RefIndex = SiSUSB_RefIndex;
- SiS_Pr->SiS_CRT1Table = SiSUSB_CRT1Table;
-
- SiS_Pr->SiS_VCLKData = SiSUSB_VCLKData;
-}
-
-/*********************************************/
-/* HELPER: Get ModeID */
-/*********************************************/
+ SiS_Pr->SiS_ModeResInfo = SiSUSB_ModeResInfo;
+ SiS_Pr->SiS_StandTable = SiSUSB_StandTable;
-#if 0
-unsigned short
-SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth)
-{
- unsigned short ModeIndex = 0;
-
- switch (HDisplay)
- {
- case 320:
- if (VDisplay == 200)
- ModeIndex = ModeIndex_320x200[Depth];
- else if (VDisplay == 240)
- ModeIndex = ModeIndex_320x240[Depth];
- break;
- case 400:
- if (VDisplay == 300)
- ModeIndex = ModeIndex_400x300[Depth];
- break;
- case 512:
- if (VDisplay == 384)
- ModeIndex = ModeIndex_512x384[Depth];
- break;
- case 640:
- if (VDisplay == 480)
- ModeIndex = ModeIndex_640x480[Depth];
- else if (VDisplay == 400)
- ModeIndex = ModeIndex_640x400[Depth];
- break;
- case 720:
- if (VDisplay == 480)
- ModeIndex = ModeIndex_720x480[Depth];
- else if (VDisplay == 576)
- ModeIndex = ModeIndex_720x576[Depth];
- break;
- case 768:
- if (VDisplay == 576)
- ModeIndex = ModeIndex_768x576[Depth];
- break;
- case 800:
- if (VDisplay == 600)
- ModeIndex = ModeIndex_800x600[Depth];
- else if (VDisplay == 480)
- ModeIndex = ModeIndex_800x480[Depth];
- break;
- case 848:
- if (VDisplay == 480)
- ModeIndex = ModeIndex_848x480[Depth];
- break;
- case 856:
- if (VDisplay == 480)
- ModeIndex = ModeIndex_856x480[Depth];
- break;
- case 960:
- if (VDisplay == 540)
- ModeIndex = ModeIndex_960x540[Depth];
- else if (VDisplay == 600)
- ModeIndex = ModeIndex_960x600[Depth];
- break;
- case 1024:
- if (VDisplay == 576)
- ModeIndex = ModeIndex_1024x576[Depth];
- else if (VDisplay == 768)
- ModeIndex = ModeIndex_1024x768[Depth];
- break;
- case 1152:
- if (VDisplay == 864)
- ModeIndex = ModeIndex_1152x864[Depth];
- break;
- case 1280:
- switch (VDisplay) {
- case 720:
- ModeIndex = ModeIndex_1280x720[Depth];
- break;
- case 768:
- ModeIndex = ModeIndex_1280x768[Depth];
- break;
- case 1024:
- ModeIndex = ModeIndex_1280x1024[Depth];
- break;
- }
- }
+ SiS_Pr->SiS_SModeIDTable = SiSUSB_SModeIDTable;
+ SiS_Pr->SiS_EModeIDTable = SiSUSB_EModeIDTable;
+ SiS_Pr->SiS_RefIndex = SiSUSB_RefIndex;
+ SiS_Pr->SiS_CRT1Table = SiSUSB_CRT1Table;
- return ModeIndex;
+ SiS_Pr->SiS_VCLKData = SiSUSB_VCLKData;
}
-#endif /* 0 */
/*********************************************/
/* HELPER: SetReg, GetReg */
@@ -165,21 +74,20 @@ SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth)
static void
SiS_SetReg(struct SiS_Private *SiS_Pr, unsigned long port,
- unsigned short index, unsigned short data)
+ unsigned short index, unsigned short data)
{
sisusb_setidxreg(SiS_Pr->sisusb, port, index, data);
}
static void
SiS_SetRegByte(struct SiS_Private *SiS_Pr, unsigned long port,
- unsigned short data)
+ unsigned short data)
{
sisusb_setreg(SiS_Pr->sisusb, port, data);
}
static unsigned char
-SiS_GetReg(struct SiS_Private *SiS_Pr, unsigned long port,
- unsigned short index)
+SiS_GetReg(struct SiS_Private *SiS_Pr, unsigned long port, unsigned short index)
{
u8 data;
@@ -200,22 +108,22 @@ SiS_GetRegByte(struct SiS_Private *SiS_Pr, unsigned long port)
static void
SiS_SetRegANDOR(struct SiS_Private *SiS_Pr, unsigned long port,
- unsigned short index, unsigned short DataAND,
- unsigned short DataOR)
+ unsigned short index, unsigned short DataAND,
+ unsigned short DataOR)
{
sisusb_setidxregandor(SiS_Pr->sisusb, port, index, DataAND, DataOR);
}
static void
SiS_SetRegAND(struct SiS_Private *SiS_Pr, unsigned long port,
- unsigned short index, unsigned short DataAND)
+ unsigned short index, unsigned short DataAND)
{
sisusb_setidxregand(SiS_Pr->sisusb, port, index, DataAND);
}
static void
-SiS_SetRegOR(struct SiS_Private *SiS_Pr,unsigned long port,
- unsigned short index, unsigned short DataOR)
+SiS_SetRegOR(struct SiS_Private *SiS_Pr, unsigned long port,
+ unsigned short index, unsigned short DataOR)
{
sisusb_setidxregor(SiS_Pr->sisusb, port, index, DataOR);
}
@@ -224,8 +132,7 @@ SiS_SetRegOR(struct SiS_Private *SiS_Pr,unsigned long port,
/* HELPER: DisplayOn, DisplayOff */
/*********************************************/
-static void
-SiS_DisplayOn(struct SiS_Private *SiS_Pr)
+static void SiS_DisplayOn(struct SiS_Private *SiS_Pr)
{
SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0xDF);
}
@@ -234,8 +141,7 @@ SiS_DisplayOn(struct SiS_Private *SiS_Pr)
/* HELPER: Init Port Addresses */
/*********************************************/
-static void
-SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
+static void SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
{
SiS_Pr->SiS_P3c4 = BaseAddr + 0x14;
SiS_Pr->SiS_P3d4 = BaseAddr + 0x24;
@@ -258,8 +164,7 @@ SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
/* HELPER: GetSysFlags */
/*********************************************/
-static void
-SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
+static void SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
{
SiS_Pr->SiS_MyCR63 = 0x63;
}
@@ -268,8 +173,7 @@ SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
/* HELPER: Init PCI & Engines */
/*********************************************/
-static void
-SiSInitPCIetc(struct SiS_Private *SiS_Pr)
+static void SiSInitPCIetc(struct SiS_Private *SiS_Pr)
{
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x20, 0xa1);
/* - Enable 2D (0x40)
@@ -285,8 +189,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr)
/* HELPER: SET SEGMENT REGISTERS */
/*********************************************/
-static void
-SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
+static void SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
{
unsigned short temp;
@@ -299,8 +202,7 @@ SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
}
-static void
-SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
+static void SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
{
unsigned short temp;
@@ -313,15 +215,13 @@ SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
}
-static void
-SiS_SetSegmentReg(struct SiS_Private *SiS_Pr, unsigned short value)
+static void SiS_SetSegmentReg(struct SiS_Private *SiS_Pr, unsigned short value)
{
SiS_SetSegRegLower(SiS_Pr, value);
SiS_SetSegRegUpper(SiS_Pr, value);
}
-static void
-SiS_ResetSegmentReg(struct SiS_Private *SiS_Pr)
+static void SiS_ResetSegmentReg(struct SiS_Private *SiS_Pr)
{
SiS_SetSegmentReg(SiS_Pr, 0);
}
@@ -337,14 +237,12 @@ SiS_SetSegmentRegOver(struct SiS_Private *SiS_Pr, unsigned short value)
SiS_SetSegmentReg(SiS_Pr, value);
}
-static void
-SiS_ResetSegmentRegOver(struct SiS_Private *SiS_Pr)
+static void SiS_ResetSegmentRegOver(struct SiS_Private *SiS_Pr)
{
SiS_SetSegmentRegOver(SiS_Pr, 0);
}
-static void
-SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
+static void SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
{
SiS_ResetSegmentReg(SiS_Pr);
SiS_ResetSegmentRegOver(SiS_Pr);
@@ -356,7 +254,7 @@ SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
static int
SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
- unsigned short *ModeIdIndex)
+ unsigned short *ModeIdIndex)
{
if ((*ModeNo) <= 0x13) {
@@ -367,12 +265,14 @@ SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
} else {
- for(*ModeIdIndex = 0; ;(*ModeIdIndex)++) {
+ for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
- if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == (*ModeNo))
+ if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID ==
+ (*ModeNo))
break;
- if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
+ if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID ==
+ 0xFF)
return 0;
}
@@ -385,8 +285,7 @@ SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
/* HELPER: ENABLE CRT1 */
/*********************************************/
-static void
-SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
+static void SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
{
/* Enable CRT1 gating */
SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, SiS_Pr->SiS_MyCR63, 0xbf);
@@ -398,9 +297,9 @@ SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
static unsigned short
SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short ModeIdIndex)
+ unsigned short ModeIdIndex)
{
- static const unsigned short ColorDepth[6] = { 1, 2, 4, 4, 6, 8};
+ static const unsigned short ColorDepth[6] = { 1, 2, 4, 4, 6, 8 };
unsigned short modeflag;
short index;
@@ -411,7 +310,8 @@ SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
}
index = (modeflag & ModeTypeMask) - ModeEGA;
- if (index < 0) index = 0;
+ if (index < 0)
+ index = 0;
return ColorDepth[index];
}
@@ -421,7 +321,7 @@ SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
static unsigned short
SiS_GetOffset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short ModeIdIndex, unsigned short rrti)
+ unsigned short ModeIdIndex, unsigned short rrti)
{
unsigned short xres, temp, colordepth, infoflag;
@@ -458,8 +358,8 @@ SiS_SetSeqRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[0] | 0x20;
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, SRdata);
- for(i = 2; i <= 4; i++) {
- SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[i-1];
+ for (i = 2; i <= 4; i++) {
+ SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[i - 1];
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, SRdata);
}
}
@@ -488,7 +388,7 @@ SiS_SetCRTCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f);
- for(i = 0; i <= 0x18; i++) {
+ for (i = 0; i <= 0x18; i++) {
CRTCdata = SiS_Pr->SiS_StandTable[StandTableIndex].CRTC[i];
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, i, CRTCdata);
}
@@ -504,7 +404,7 @@ SiS_SetATTRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
unsigned char ARdata;
unsigned short i;
- for(i = 0; i <= 0x13; i++) {
+ for (i = 0; i <= 0x13; i++) {
ARdata = SiS_Pr->SiS_StandTable[StandTableIndex].ATTR[i];
SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, i);
@@ -529,7 +429,7 @@ SiS_SetGRCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
unsigned char GRdata;
unsigned short i;
- for(i = 0; i <= 0x08; i++) {
+ for (i = 0; i <= 0x08; i++) {
GRdata = SiS_Pr->SiS_StandTable[StandTableIndex].GRC[i];
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3ce, i, GRdata);
}
@@ -544,12 +444,11 @@ SiS_SetGRCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
/* CLEAR EXTENDED REGISTERS */
/*********************************************/
-static void
-SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+static void SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
{
int i;
- for(i = 0x0A; i <= 0x0E; i++) {
+ for (i = 0x0A; i <= 0x0E; i++) {
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, 0x00);
}
@@ -562,15 +461,16 @@ SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
static unsigned short
SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short ModeIdIndex)
+ unsigned short ModeIdIndex)
{
unsigned short rrti, i, index, temp;
if (ModeNo <= 0x13)
return 0xFFFF;
- index = SiS_GetReg(SiS_Pr,SiS_Pr->SiS_P3d4, 0x33) & 0x0F;
- if (index > 0) index--;
+ index = SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x33) & 0x0F;
+ if (index > 0)
+ index--;
rrti = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].REFindex;
ModeNo = SiS_Pr->SiS_RefIndex[rrti].ModeID;
@@ -580,13 +480,14 @@ SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
if (SiS_Pr->SiS_RefIndex[rrti + i].ModeID != ModeNo)
break;
- temp = SiS_Pr->SiS_RefIndex[rrti + i].Ext_InfoFlag & ModeTypeMask;
+ temp =
+ SiS_Pr->SiS_RefIndex[rrti + i].Ext_InfoFlag & ModeTypeMask;
if (temp < SiS_Pr->SiS_ModeType)
break;
i++;
index--;
- } while(index != 0xFFFF);
+ } while (index != 0xFFFF);
i--;
@@ -597,8 +498,7 @@ SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
/* SYNC */
/*********************************************/
-static void
-SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
+static void SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
{
unsigned short sync = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag >> 8;
sync &= 0xC0;
@@ -612,39 +512,40 @@ SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
static void
SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short ModeIdIndex, unsigned short rrti)
+ unsigned short ModeIdIndex, unsigned short rrti)
{
- unsigned char index;
+ unsigned char index;
unsigned short temp, i, j, modeflag;
- SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4,0x11,0x7f);
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f);
modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRT1CRTC;
- for(i = 0,j = 0; i <= 7; i++, j++) {
+ for (i = 0, j = 0; i <= 7; i++, j++) {
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
- SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
}
- for(j = 0x10; i <= 10; i++, j++) {
+ for (j = 0x10; i <= 10; i++, j++) {
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
- SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
}
- for(j = 0x15; i <= 12; i++, j++) {
+ for (j = 0x15; i <= 12; i++, j++) {
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
- SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
}
- for(j = 0x0A; i <= 15; i++, j++) {
+ for (j = 0x0A; i <= 15; i++, j++) {
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, j,
- SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
}
temp = SiS_Pr->SiS_CRT1Table[index].CR[16] & 0xE0;
- SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4, 0x0E, temp);
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0E, temp);
temp = ((SiS_Pr->SiS_CRT1Table[index].CR[16]) & 0x01) << 5;
- if (modeflag & DoubleScanMode) temp |= 0x80;
+ if (modeflag & DoubleScanMode)
+ temp |= 0x80;
SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x09, 0x5F, temp);
if (SiS_Pr->SiS_ModeType > ModeVGA)
@@ -659,10 +560,10 @@ SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
static void
SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short ModeIdIndex, unsigned short rrti)
+ unsigned short ModeIdIndex, unsigned short rrti)
{
unsigned short du = SiS_GetOffset(SiS_Pr, ModeNo, ModeIdIndex, rrti);
- unsigned short infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+ unsigned short infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
unsigned short temp;
temp = (du >> 8) & 0x0f;
@@ -670,11 +571,13 @@ SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x13, (du & 0xFF));
- if (infoflag & InterlaceMode) du >>= 1;
+ if (infoflag & InterlaceMode)
+ du >>= 1;
du <<= 5;
temp = (du >> 8) & 0xff;
- if (du & 0xff) temp++;
+ if (du & 0xff)
+ temp++;
temp++;
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x10, temp);
}
@@ -685,17 +588,17 @@ SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
static void
SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short rrti)
+ unsigned short rrti)
{
unsigned short index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK;
unsigned short clka = SiS_Pr->SiS_VCLKData[index].SR2B;
unsigned short clkb = SiS_Pr->SiS_VCLKData[index].SR2C;
- SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4,0x31,0xCF);
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x31, 0xCF);
- SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2B,clka);
- SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2C,clkb);
- SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2D,0x01);
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2B, clka);
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2C, clkb);
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2D, 0x01);
}
/*********************************************/
@@ -704,7 +607,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
static void
SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short mi)
+ unsigned short mi)
{
unsigned short modeflag = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag;
@@ -729,7 +632,7 @@ SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
static void
SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short rrti)
+ unsigned short rrti)
{
unsigned short data = 0, VCLK = 0, index = 0;
@@ -738,7 +641,8 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
VCLK = SiS_Pr->SiS_VCLKData[index].CLOCK;
}
- if (VCLK >= 166) data |= 0x0c;
+ if (VCLK >= 166)
+ data |= 0x0c;
SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x32, 0xf3, data);
if (VCLK >= 166)
@@ -758,7 +662,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
static void
SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short ModeIdIndex, unsigned short rrti)
+ unsigned short ModeIdIndex, unsigned short rrti)
{
unsigned short data, infoflag = 0, modeflag;
@@ -778,17 +682,22 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
data |= 0x02;
data |= ((SiS_Pr->SiS_ModeType - ModeVGA) << 2);
}
- if (infoflag & InterlaceMode) data |= 0x20;
+ if (infoflag & InterlaceMode)
+ data |= 0x20;
}
SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x06, 0xC0, data);
data = 0;
if (infoflag & InterlaceMode) {
/* data = (Hsync / 8) - ((Htotal / 8) / 2) + 3 */
- unsigned short hrs = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x04) |
- ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0xc0) << 2)) - 3;
- unsigned short hto = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x00) |
- ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0x03) << 8)) + 5;
+ unsigned short hrs =
+ (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x04) |
+ ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0xc0) << 2))
+ - 3;
+ unsigned short hto =
+ (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x00) |
+ ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0x03) << 8))
+ + 5;
data = hrs - (hto >> 1) + 3;
}
SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x19, (data & 0xFF));
@@ -829,20 +738,26 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
static void
SiS_WriteDAC(struct SiS_Private *SiS_Pr, unsigned long DACData,
- unsigned short shiftflag, unsigned short dl, unsigned short ah,
- unsigned short al, unsigned short dh)
+ unsigned short shiftflag, unsigned short dl, unsigned short ah,
+ unsigned short al, unsigned short dh)
{
unsigned short d1, d2, d3;
switch (dl) {
- case 0:
- d1 = dh; d2 = ah; d3 = al;
- break;
- case 1:
- d1 = ah; d2 = al; d3 = dh;
- break;
- default:
- d1 = al; d2 = dh; d3 = ah;
+ case 0:
+ d1 = dh;
+ d2 = ah;
+ d3 = al;
+ break;
+ case 1:
+ d1 = ah;
+ d2 = al;
+ d3 = dh;
+ break;
+ default:
+ d1 = al;
+ d2 = dh;
+ d3 = ah;
}
SiS_SetRegByte(SiS_Pr, DACData, (d1 << shiftflag));
SiS_SetRegByte(SiS_Pr, DACData, (d2 << shiftflag));
@@ -850,7 +765,8 @@ SiS_WriteDAC(struct SiS_Private *SiS_Pr, unsigned long DACData,
}
static void
-SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi)
+SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short mi)
{
unsigned short data, data2, time, i, j, k, m, n, o;
unsigned short si, di, bx, sf;
@@ -884,41 +800,45 @@ SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi
SiS_SetRegByte(SiS_Pr, DACAddr, 0x00);
- for(i = 0; i < j; i++) {
+ for (i = 0; i < j; i++) {
data = table[i];
- for(k = 0; k < 3; k++) {
+ for (k = 0; k < 3; k++) {
data2 = 0;
- if (data & 0x01) data2 += 0x2A;
- if (data & 0x02) data2 += 0x15;
+ if (data & 0x01)
+ data2 += 0x2A;
+ if (data & 0x02)
+ data2 += 0x15;
SiS_SetRegByte(SiS_Pr, DACData, (data2 << sf));
data >>= 2;
}
}
if (time == 256) {
- for(i = 16; i < 32; i++) {
+ for (i = 16; i < 32; i++) {
data = table[i] << sf;
- for(k = 0; k < 3; k++)
+ for (k = 0; k < 3; k++)
SiS_SetRegByte(SiS_Pr, DACData, data);
}
si = 32;
- for(m = 0; m < 9; m++) {
+ for (m = 0; m < 9; m++) {
di = si;
bx = si + 4;
- for(n = 0; n < 3; n++) {
- for(o = 0; o < 5; o++) {
+ for (n = 0; n < 3; n++) {
+ for (o = 0; o < 5; o++) {
SiS_WriteDAC(SiS_Pr, DACData, sf, n,
- table[di], table[bx], table[si]);
+ table[di], table[bx],
+ table[si]);
si++;
}
si -= 2;
- for(o = 0; o < 3; o++) {
+ for (o = 0; o < 3; o++) {
SiS_WriteDAC(SiS_Pr, DACData, sf, n,
- table[di], table[si], table[bx]);
+ table[di], table[si],
+ table[bx]);
si--;
}
}
- si += 5;
+ si += 5;
}
}
}
@@ -929,7 +849,7 @@ SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi
static void
SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
- unsigned short ModeIdIndex)
+ unsigned short ModeIdIndex)
{
unsigned short StandTableIndex, rrti;
@@ -970,11 +890,10 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
/* SiSSetMode() */
/*********************************************/
-int
-SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
{
unsigned short ModeIdIndex;
- unsigned long BaseAddr = SiS_Pr->IOAddress;
+ unsigned long BaseAddr = SiS_Pr->IOAddress;
SiSUSB_InitPtr(SiS_Pr);
SiSUSBRegInit(SiS_Pr, BaseAddr);
@@ -990,7 +909,7 @@ SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
ModeNo &= 0x7f;
SiS_Pr->SiS_ModeType =
- SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag & ModeTypeMask;
+ SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag & ModeTypeMask;
SiS_Pr->SiS_SetFlag = LowModeTests;
@@ -1008,8 +927,7 @@ SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
return 1;
}
-int
-SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
+int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
{
unsigned short ModeNo = 0;
int i;
@@ -1041,7 +959,3 @@ SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
}
#endif /* INCL_SISUSB_CON */
-
-
-
-
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
index 864bc0e96591..c46ce42d4489 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -46,7 +46,7 @@
* * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
*
*/
@@ -76,21 +76,21 @@
#define CRT2Mode 0x0800
#define HalfDCLK 0x1000
#define NoSupportSimuTV 0x2000
-#define NoSupportLCDScale 0x4000 /* SiS bridge: No scaling possible (no matter what panel) */
+#define NoSupportLCDScale 0x4000 /* SiS bridge: No scaling possible (no matter what panel) */
#define DoubleScanMode 0x8000
/* Infoflag */
#define SupportTV 0x0008
#define SupportTV1024 0x0800
-#define SupportCHTV 0x0800
-#define Support64048060Hz 0x0800 /* Special for 640x480 LCD */
+#define SupportCHTV 0x0800
+#define Support64048060Hz 0x0800 /* Special for 640x480 LCD */
#define SupportHiVision 0x0010
#define SupportYPbPr750p 0x1000
#define SupportLCD 0x0020
#define SupportRAMDAC2 0x0040 /* All (<= 100Mhz) */
-#define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */
-#define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */
-#define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */
+#define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */
+#define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */
+#define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */
#define InterlaceMode 0x0080
#define SyncPP 0x0000
#define SyncPN 0x4000
@@ -129,7 +129,7 @@
#define SIS_RI_856x480 19
#define SIS_RI_1280x768 20
#define SIS_RI_1400x1050 21
-#define SIS_RI_1152x864 22 /* Up to here SiS conforming */
+#define SIS_RI_1152x864 22 /* Up to here SiS conforming */
#define SIS_RI_848x480 23
#define SIS_RI_1360x768 24
#define SIS_RI_1024x600 25
@@ -147,691 +147,691 @@
#define SIS_CRT2_PORT_04 0x04 - 0x30
/* Mode numbers */
-static const unsigned short ModeIndex_320x200[] = {0x59, 0x41, 0x00, 0x4f};
-static const unsigned short ModeIndex_320x240[] = {0x50, 0x56, 0x00, 0x53};
-static const unsigned short ModeIndex_400x300[] = {0x51, 0x57, 0x00, 0x54};
-static const unsigned short ModeIndex_512x384[] = {0x52, 0x58, 0x00, 0x5c};
-static const unsigned short ModeIndex_640x400[] = {0x2f, 0x5d, 0x00, 0x5e};
-static const unsigned short ModeIndex_640x480[] = {0x2e, 0x44, 0x00, 0x62};
-static const unsigned short ModeIndex_720x480[] = {0x31, 0x33, 0x00, 0x35};
-static const unsigned short ModeIndex_720x576[] = {0x32, 0x34, 0x00, 0x36};
-static const unsigned short ModeIndex_768x576[] = {0x5f, 0x60, 0x00, 0x61};
-static const unsigned short ModeIndex_800x480[] = {0x70, 0x7a, 0x00, 0x76};
-static const unsigned short ModeIndex_800x600[] = {0x30, 0x47, 0x00, 0x63};
-static const unsigned short ModeIndex_848x480[] = {0x39, 0x3b, 0x00, 0x3e};
-static const unsigned short ModeIndex_856x480[] = {0x3f, 0x42, 0x00, 0x45};
-static const unsigned short ModeIndex_960x540[] = {0x1d, 0x1e, 0x00, 0x1f};
-static const unsigned short ModeIndex_960x600[] = {0x20, 0x21, 0x00, 0x22};
-static const unsigned short ModeIndex_1024x768[] = {0x38, 0x4a, 0x00, 0x64};
-static const unsigned short ModeIndex_1024x576[] = {0x71, 0x74, 0x00, 0x77};
-static const unsigned short ModeIndex_1152x864[] = {0x29, 0x2a, 0x00, 0x2b};
-static const unsigned short ModeIndex_1280x720[] = {0x79, 0x75, 0x00, 0x78};
-static const unsigned short ModeIndex_1280x768[] = {0x23, 0x24, 0x00, 0x25};
-static const unsigned short ModeIndex_1280x1024[] = {0x3a, 0x4d, 0x00, 0x65};
+static const unsigned short ModeIndex_320x200[] = { 0x59, 0x41, 0x00, 0x4f };
+static const unsigned short ModeIndex_320x240[] = { 0x50, 0x56, 0x00, 0x53 };
+static const unsigned short ModeIndex_400x300[] = { 0x51, 0x57, 0x00, 0x54 };
+static const unsigned short ModeIndex_512x384[] = { 0x52, 0x58, 0x00, 0x5c };
+static const unsigned short ModeIndex_640x400[] = { 0x2f, 0x5d, 0x00, 0x5e };
+static const unsigned short ModeIndex_640x480[] = { 0x2e, 0x44, 0x00, 0x62 };
+static const unsigned short ModeIndex_720x480[] = { 0x31, 0x33, 0x00, 0x35 };
+static const unsigned short ModeIndex_720x576[] = { 0x32, 0x34, 0x00, 0x36 };
+static const unsigned short ModeIndex_768x576[] = { 0x5f, 0x60, 0x00, 0x61 };
+static const unsigned short ModeIndex_800x480[] = { 0x70, 0x7a, 0x00, 0x76 };
+static const unsigned short ModeIndex_800x600[] = { 0x30, 0x47, 0x00, 0x63 };
+static const unsigned short ModeIndex_848x480[] = { 0x39, 0x3b, 0x00, 0x3e };
+static const unsigned short ModeIndex_856x480[] = { 0x3f, 0x42, 0x00, 0x45 };
+static const unsigned short ModeIndex_960x540[] = { 0x1d, 0x1e, 0x00, 0x1f };
+static const unsigned short ModeIndex_960x600[] = { 0x20, 0x21, 0x00, 0x22 };
+static const unsigned short ModeIndex_1024x768[] = { 0x38, 0x4a, 0x00, 0x64 };
+static const unsigned short ModeIndex_1024x576[] = { 0x71, 0x74, 0x00, 0x77 };
+static const unsigned short ModeIndex_1152x864[] = { 0x29, 0x2a, 0x00, 0x2b };
+static const unsigned short ModeIndex_1280x720[] = { 0x79, 0x75, 0x00, 0x78 };
+static const unsigned short ModeIndex_1280x768[] = { 0x23, 0x24, 0x00, 0x25 };
+static const unsigned short ModeIndex_1280x1024[] = { 0x3a, 0x4d, 0x00, 0x65 };
-static const unsigned char SiS_MDA_DAC[] =
-{
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
- 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
- 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
- 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
- 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F
+static const unsigned char SiS_MDA_DAC[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+ 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+ 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+ 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+ 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F
};
-static const unsigned char SiS_CGA_DAC[] =
-{
- 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
- 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
- 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
- 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
- 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
- 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
- 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
- 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F
+static const unsigned char SiS_CGA_DAC[] = {
+ 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+ 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+ 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+ 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+ 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+ 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+ 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+ 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F
};
-static const unsigned char SiS_EGA_DAC[] =
-{
- 0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15,
- 0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35,
- 0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D,
- 0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D,
- 0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17,
- 0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37,
- 0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F,
- 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F
+static const unsigned char SiS_EGA_DAC[] = {
+ 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x05, 0x15,
+ 0x20, 0x30, 0x24, 0x34, 0x21, 0x31, 0x25, 0x35,
+ 0x08, 0x18, 0x0C, 0x1C, 0x09, 0x19, 0x0D, 0x1D,
+ 0x28, 0x38, 0x2C, 0x3C, 0x29, 0x39, 0x2D, 0x3D,
+ 0x02, 0x12, 0x06, 0x16, 0x03, 0x13, 0x07, 0x17,
+ 0x22, 0x32, 0x26, 0x36, 0x23, 0x33, 0x27, 0x37,
+ 0x0A, 0x1A, 0x0E, 0x1E, 0x0B, 0x1B, 0x0F, 0x1F,
+ 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F
};
-static const unsigned char SiS_VGA_DAC[] =
-{
- 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
- 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
- 0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18,
- 0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F,
- 0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F,
- 0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00,
- 0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18,
- 0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04,
- 0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10,
- 0x0B,0x0C,0x0D,0x0F,0x10
+static const unsigned char SiS_VGA_DAC[] = {
+ 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+ 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+ 0x00, 0x05, 0x08, 0x0B, 0x0E, 0x11, 0x14, 0x18,
+ 0x1C, 0x20, 0x24, 0x28, 0x2D, 0x32, 0x38, 0x3F,
+ 0x00, 0x10, 0x1F, 0x2F, 0x3F, 0x1F, 0x27, 0x2F,
+ 0x37, 0x3F, 0x2D, 0x31, 0x36, 0x3A, 0x3F, 0x00,
+ 0x07, 0x0E, 0x15, 0x1C, 0x0E, 0x11, 0x15, 0x18,
+ 0x1C, 0x14, 0x16, 0x18, 0x1A, 0x1C, 0x00, 0x04,
+ 0x08, 0x0C, 0x10, 0x08, 0x0A, 0x0C, 0x0E, 0x10,
+ 0x0B, 0x0C, 0x0D, 0x0F, 0x10
};
-static const struct SiS_St SiSUSB_SModeIDTable[] =
-{
- {0x03,0x0010,0x18,0x02,0x02,0x00,0x01,0x03,0x40},
- {0xff,0x0000,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+static const struct SiS_St SiSUSB_SModeIDTable[] = {
+ {0x03, 0x0010, 0x18, 0x02, 0x02, 0x00, 0x01, 0x03, 0x40},
+ {0xff, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}
};
-static const struct SiS_StResInfo_S SiSUSB_StResInfo[] =
-{
- { 640,400},
- { 640,350},
- { 720,400},
- { 720,350},
- { 640,480}
+static const struct SiS_StResInfo_S SiSUSB_StResInfo[] = {
+ {640, 400},
+ {640, 350},
+ {720, 400},
+ {720, 350},
+ {640, 480}
};
-static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] =
-{
- { 320, 200, 8, 8}, /* 0x00 */
- { 320, 240, 8, 8}, /* 0x01 */
- { 320, 400, 8, 8}, /* 0x02 */
- { 400, 300, 8, 8}, /* 0x03 */
- { 512, 384, 8, 8}, /* 0x04 */
- { 640, 400, 8,16}, /* 0x05 */
- { 640, 480, 8,16}, /* 0x06 */
- { 800, 600, 8,16}, /* 0x07 */
- { 1024, 768, 8,16}, /* 0x08 */
- { 1280,1024, 8,16}, /* 0x09 */
- { 1600,1200, 8,16}, /* 0x0a */
- { 1920,1440, 8,16}, /* 0x0b */
- { 2048,1536, 8,16}, /* 0x0c */
- { 720, 480, 8,16}, /* 0x0d */
- { 720, 576, 8,16}, /* 0x0e */
- { 1280, 960, 8,16}, /* 0x0f */
- { 800, 480, 8,16}, /* 0x10 */
- { 1024, 576, 8,16}, /* 0x11 */
- { 1280, 720, 8,16}, /* 0x12 */
- { 856, 480, 8,16}, /* 0x13 */
- { 1280, 768, 8,16}, /* 0x14 */
- { 1400,1050, 8,16}, /* 0x15 */
- { 1152, 864, 8,16}, /* 0x16 */
- { 848, 480, 8,16}, /* 0x17 */
- { 1360, 768, 8,16}, /* 0x18 */
- { 1024, 600, 8,16}, /* 0x19 */
- { 1152, 768, 8,16}, /* 0x1a */
- { 768, 576, 8,16}, /* 0x1b */
- { 1360,1024, 8,16}, /* 0x1c */
- { 1680,1050, 8,16}, /* 0x1d */
- { 1280, 800, 8,16}, /* 0x1e */
- { 1920,1080, 8,16}, /* 0x1f */
- { 960, 540, 8,16}, /* 0x20 */
- { 960, 600, 8,16} /* 0x21 */
+static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = {
+ {320, 200, 8, 8}, /* 0x00 */
+ {320, 240, 8, 8}, /* 0x01 */
+ {320, 400, 8, 8}, /* 0x02 */
+ {400, 300, 8, 8}, /* 0x03 */
+ {512, 384, 8, 8}, /* 0x04 */
+ {640, 400, 8, 16}, /* 0x05 */
+ {640, 480, 8, 16}, /* 0x06 */
+ {800, 600, 8, 16}, /* 0x07 */
+ {1024, 768, 8, 16}, /* 0x08 */
+ {1280, 1024, 8, 16}, /* 0x09 */
+ {1600, 1200, 8, 16}, /* 0x0a */
+ {1920, 1440, 8, 16}, /* 0x0b */
+ {2048, 1536, 8, 16}, /* 0x0c */
+ {720, 480, 8, 16}, /* 0x0d */
+ {720, 576, 8, 16}, /* 0x0e */
+ {1280, 960, 8, 16}, /* 0x0f */
+ {800, 480, 8, 16}, /* 0x10 */
+ {1024, 576, 8, 16}, /* 0x11 */
+ {1280, 720, 8, 16}, /* 0x12 */
+ {856, 480, 8, 16}, /* 0x13 */
+ {1280, 768, 8, 16}, /* 0x14 */
+ {1400, 1050, 8, 16}, /* 0x15 */
+ {1152, 864, 8, 16}, /* 0x16 */
+ {848, 480, 8, 16}, /* 0x17 */
+ {1360, 768, 8, 16}, /* 0x18 */
+ {1024, 600, 8, 16}, /* 0x19 */
+ {1152, 768, 8, 16}, /* 0x1a */
+ {768, 576, 8, 16}, /* 0x1b */
+ {1360, 1024, 8, 16}, /* 0x1c */
+ {1680, 1050, 8, 16}, /* 0x1d */
+ {1280, 800, 8, 16}, /* 0x1e */
+ {1920, 1080, 8, 16}, /* 0x1f */
+ {960, 540, 8, 16}, /* 0x20 */
+ {960, 600, 8, 16} /* 0x21 */
};
-static const struct SiS_StandTable SiSUSB_StandTable[] =
-{
+static const struct SiS_StandTable SiSUSB_StandTable[] = {
/* MD_3_400 - mode 0x03 - 400 */
{
- 0x50,0x18,0x10,0x1000,
- { 0x00,0x03,0x00,0x02 },
- 0x67,
- { 0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
- 0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
- 0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
- 0xff },
- { 0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
- 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
- 0x0c,0x00,0x0f,0x08 },
- { 0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00, 0xff }
- },
+ 0x50, 0x18, 0x10, 0x1000,
+ {0x00, 0x03, 0x00, 0x02},
+ 0x67,
+ {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+ 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
+ 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
+ 0xff},
+ {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ 0x0c, 0x00, 0x0f, 0x08},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, 0xff}
+ },
/* Generic for VGA and higher */
{
- 0x00,0x00,0x00,0x0000,
- { 0x01,0x0f,0x00,0x0e },
- 0x23,
- { 0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e,
- 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
- 0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3,
- 0xff },
- { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
- 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
- 0x01,0x00,0x00,0x00 },
- { 0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f, 0xff }
- }
+ 0x00, 0x00, 0x00, 0x0000,
+ {0x01, 0x0f, 0x00, 0x0e},
+ 0x23,
+ {0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
+ 0xff},
+ {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x01, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, 0xff}
+ }
};
-static const struct SiS_Ext SiSUSB_EModeIDTable[] =
-{
- {0x2e,0x0a1b,0x0101,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x8 */
- {0x2f,0x0a1b,0x0100,SIS_RI_640x400, 0x00,0x00,0x05,0x05,0x10, 0}, /* 640x400x8 */
- {0x30,0x2a1b,0x0103,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x8 */
- {0x31,0x4a1b,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x8 */
- {0x32,0x4a1b,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x8 */
- {0x33,0x4a1d,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x16 */
- {0x34,0x6a1d,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x16 */
- {0x35,0x4a1f,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x32 */
- {0x36,0x6a1f,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x32 */
- {0x38,0x0a1b,0x0105,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x8 */
- {0x3a,0x0e3b,0x0107,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x8 */
- {0x41,0x9a1d,0x010e,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x16 */
- {0x44,0x0a1d,0x0111,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x16 */
- {0x47,0x2a1d,0x0114,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x16 */
- {0x4a,0x0a3d,0x0117,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x16 */
- {0x4d,0x0e7d,0x011a,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x16 */
- {0x50,0x9a1b,0x0132,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x8 */
- {0x51,0xba1b,0x0133,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x8 */
- {0x52,0xba1b,0x0134,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x8 */
- {0x56,0x9a1d,0x0135,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x16 */
- {0x57,0xba1d,0x0136,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x16 */
- {0x58,0xba1d,0x0137,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x16 */
- {0x59,0x9a1b,0x0138,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x8 */
- {0x5c,0xba1f,0x0000,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x32 */
- {0x5d,0x0a1d,0x0139,SIS_RI_640x400, 0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x16 */
- {0x5e,0x0a1f,0x0000,SIS_RI_640x400, 0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x32 */
- {0x62,0x0a3f,0x013a,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x32 */
- {0x63,0x2a3f,0x013b,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x32 */
- {0x64,0x0a7f,0x013c,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x32 */
- {0x65,0x0eff,0x013d,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x32 */
- {0x70,0x6a1b,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x8 */
- {0x71,0x4a1b,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x8 */
- {0x74,0x4a1d,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x16 */
- {0x75,0x0a3d,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x16 */
- {0x76,0x6a1f,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x32 */
- {0x77,0x4a1f,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x32 */
- {0x78,0x0a3f,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x32 */
- {0x79,0x0a3b,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x8 */
- {0x7a,0x6a1d,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x16 */
- {0x23,0x0e3b,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x8 */
- {0x24,0x0e7d,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x16 */
- {0x25,0x0eff,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x32 */
- {0x39,0x6a1b,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1}, /* 848x480 */
- {0x3b,0x6a3d,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1},
- {0x3e,0x6a7f,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1},
- {0x3f,0x6a1b,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1}, /* 856x480 */
- {0x42,0x6a3d,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1},
- {0x45,0x6a7f,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1},
- {0x4f,0x9a1f,0x0000,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x32 */
- {0x53,0x9a1f,0x0000,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x32 */
- {0x54,0xba1f,0x0000,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x32 */
- {0x5f,0x6a1b,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1}, /* 768x576 */
- {0x60,0x6a1d,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1},
- {0x61,0x6a3f,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1},
- {0x1d,0x6a1b,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1}, /* 960x540 */
- {0x1e,0x6a3d,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1},
- {0x1f,0x6a7f,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1},
- {0x20,0x6a1b,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1}, /* 960x600 */
- {0x21,0x6a3d,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1},
- {0x22,0x6a7f,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1},
- {0x29,0x4e1b,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1}, /* 1152x864 */
- {0x2a,0x4e3d,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1},
- {0x2b,0x4e7f,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1},
- {0xff,0x0000,0x0000,0, 0x00,0x00,0x00,0x00,0x00,-1}
+static const struct SiS_Ext SiSUSB_EModeIDTable[] = {
+ {0x2e, 0x0a1b, 0x0101, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2}, /* 640x480x8 */
+ {0x2f, 0x0a1b, 0x0100, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x05, 0x10, 0}, /* 640x400x8 */
+ {0x30, 0x2a1b, 0x0103, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3}, /* 800x600x8 */
+ {0x31, 0x4a1b, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1}, /* 720x480x8 */
+ {0x32, 0x4a1b, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1}, /* 720x576x8 */
+ {0x33, 0x4a1d, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1}, /* 720x480x16 */
+ {0x34, 0x6a1d, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1}, /* 720x576x16 */
+ {0x35, 0x4a1f, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1}, /* 720x480x32 */
+ {0x36, 0x6a1f, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1}, /* 720x576x32 */
+ {0x38, 0x0a1b, 0x0105, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4}, /* 1024x768x8 */
+ {0x3a, 0x0e3b, 0x0107, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8}, /* 1280x1024x8 */
+ {0x41, 0x9a1d, 0x010e, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0}, /* 320x200x16 */
+ {0x44, 0x0a1d, 0x0111, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2}, /* 640x480x16 */
+ {0x47, 0x2a1d, 0x0114, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3}, /* 800x600x16 */
+ {0x4a, 0x0a3d, 0x0117, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4}, /* 1024x768x16 */
+ {0x4d, 0x0e7d, 0x011a, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8}, /* 1280x1024x16 */
+ {0x50, 0x9a1b, 0x0132, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2}, /* 320x240x8 */
+ {0x51, 0xba1b, 0x0133, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3}, /* 400x300x8 */
+ {0x52, 0xba1b, 0x0134, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4}, /* 512x384x8 */
+ {0x56, 0x9a1d, 0x0135, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2}, /* 320x240x16 */
+ {0x57, 0xba1d, 0x0136, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3}, /* 400x300x16 */
+ {0x58, 0xba1d, 0x0137, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4}, /* 512x384x16 */
+ {0x59, 0x9a1b, 0x0138, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0}, /* 320x200x8 */
+ {0x5c, 0xba1f, 0x0000, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4}, /* 512x384x32 */
+ {0x5d, 0x0a1d, 0x0139, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x07, 0x10, 0}, /* 640x400x16 */
+ {0x5e, 0x0a1f, 0x0000, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x07, 0x10, 0}, /* 640x400x32 */
+ {0x62, 0x0a3f, 0x013a, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2}, /* 640x480x32 */
+ {0x63, 0x2a3f, 0x013b, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3}, /* 800x600x32 */
+ {0x64, 0x0a7f, 0x013c, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4}, /* 1024x768x32 */
+ {0x65, 0x0eff, 0x013d, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8}, /* 1280x1024x32 */
+ {0x70, 0x6a1b, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1}, /* 800x480x8 */
+ {0x71, 0x4a1b, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1}, /* 1024x576x8 */
+ {0x74, 0x4a1d, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1}, /* 1024x576x16 */
+ {0x75, 0x0a3d, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5}, /* 1280x720x16 */
+ {0x76, 0x6a1f, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1}, /* 800x480x32 */
+ {0x77, 0x4a1f, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1}, /* 1024x576x32 */
+ {0x78, 0x0a3f, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5}, /* 1280x720x32 */
+ {0x79, 0x0a3b, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5}, /* 1280x720x8 */
+ {0x7a, 0x6a1d, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1}, /* 800x480x16 */
+ {0x23, 0x0e3b, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6}, /* 1280x768x8 */
+ {0x24, 0x0e7d, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6}, /* 1280x768x16 */
+ {0x25, 0x0eff, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6}, /* 1280x768x32 */
+ {0x39, 0x6a1b, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28, -1}, /* 848x480 */
+ {0x3b, 0x6a3d, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28,
+ -1},
+ {0x3e, 0x6a7f, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28,
+ -1},
+ {0x3f, 0x6a1b, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a, -1}, /* 856x480 */
+ {0x42, 0x6a3d, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a,
+ -1},
+ {0x45, 0x6a7f, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a,
+ -1},
+ {0x4f, 0x9a1f, 0x0000, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0}, /* 320x200x32 */
+ {0x53, 0x9a1f, 0x0000, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2}, /* 320x240x32 */
+ {0x54, 0xba1f, 0x0000, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3}, /* 400x300x32 */
+ {0x5f, 0x6a1b, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c, -1}, /* 768x576 */
+ {0x60, 0x6a1d, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c,
+ -1},
+ {0x61, 0x6a3f, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c,
+ -1},
+ {0x1d, 0x6a1b, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d, -1}, /* 960x540 */
+ {0x1e, 0x6a3d, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d,
+ -1},
+ {0x1f, 0x6a7f, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d,
+ -1},
+ {0x20, 0x6a1b, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e, -1}, /* 960x600 */
+ {0x21, 0x6a3d, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e,
+ -1},
+ {0x22, 0x6a7f, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e,
+ -1},
+ {0x29, 0x4e1b, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33, -1}, /* 1152x864 */
+ {0x2a, 0x4e3d, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33,
+ -1},
+ {0x2b, 0x4e7f, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33,
+ -1},
+ {0xff, 0x0000, 0x0000, 0, 0x00, 0x00, 0x00, 0x00, 0x00, -1}
};
-static const struct SiS_Ext2 SiSUSB_RefIndex[] =
-{
- {0x085f,0x0d,0x03,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x0 */
- {0x0067,0x0e,0x04,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x1 */
- {0x0067,0x0f,0x08,0x48,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x2 */
- {0x0067,0x10,0x07,0x8b,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x3 */
- {0x0047,0x11,0x0a,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x4 */
- {0x0047,0x12,0x0d,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x5 */
- {0x0047,0x13,0x13,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x6 */
- {0x0107,0x14,0x1c,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x7 */
- {0xc85f,0x05,0x00,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x8 */
- {0xc067,0x06,0x02,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x9 */
- {0xc067,0x07,0x02,0x47,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xa */
- {0xc067,0x08,0x03,0x8a,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xb */
- {0xc047,0x09,0x05,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xc */
- {0xc047,0x0a,0x09,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xd */
- {0xc047,0x0b,0x0e,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xe */
- {0xc047,0x0c,0x15,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xf */
- {0x487f,0x04,0x00,0x00,0x00,0x2f, 640, 400, 0x30, 0x55, 0x6e}, /* 0x10 */
- {0xc06f,0x3c,0x01,0x06,0x13,0x31, 720, 480, 0x30, 0x00, 0x00}, /* 0x11 */
- {0x006f,0x3d,0x6f,0x06,0x14,0x32, 720, 576, 0x30, 0x00, 0x00}, /* 0x12 (6f was 03) */
- {0x0087,0x15,0x06,0x00,0x06,0x38,1024, 768, 0x30, 0x00, 0x00}, /* 0x13 */
- {0xc877,0x16,0x0b,0x06,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x14 */
- {0xc067,0x17,0x0f,0x49,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x15 */
- {0x0067,0x18,0x11,0x00,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x16 */
- {0x0047,0x19,0x16,0x8c,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x17 */
- {0x0107,0x1a,0x1b,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x18 */
- {0x0107,0x1b,0x1f,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x19 */
- {0x407f,0x00,0x00,0x00,0x00,0x41, 320, 200, 0x30, 0x56, 0x4e}, /* 0x1a */
- {0xc07f,0x01,0x00,0x04,0x04,0x50, 320, 240, 0x30, 0x00, 0x00}, /* 0x1b */
- {0x007f,0x02,0x04,0x05,0x05,0x51, 400, 300, 0x30, 0x00, 0x00}, /* 0x1c */
- {0xc077,0x03,0x0b,0x06,0x06,0x52, 512, 384, 0x30, 0x00, 0x00}, /* 0x1d */
- {0x0077,0x32,0x40,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1e */
- {0x0047,0x33,0x07,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1f */
- {0x0047,0x34,0x0a,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x20 */
- {0x0077,0x35,0x0b,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x21 */
- {0x0047,0x36,0x11,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x22 */
- {0x0047,0x37,0x16,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x23 */
- {0x1137,0x38,0x19,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x24 */
- {0x1107,0x39,0x1e,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x25 */
- {0x1307,0x3a,0x20,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x26 */
- {0x0077,0x42,0x5b,0x08,0x11,0x23,1280, 768, 0x30, 0x00, 0x00}, /* 0x27 */
- {0x0087,0x45,0x57,0x00,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x28 38Hzi */
- {0xc067,0x46,0x55,0x0b,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x29 848x480-60Hz */
- {0x0087,0x47,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2a 856x480-38Hzi */
- {0xc067,0x48,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2b 856x480-60Hz */
- {0x006f,0x4d,0x71,0x06,0x15,0x5f, 768, 576, 0x30, 0x00, 0x00}, /* 0x2c 768x576-56Hz */
- {0x0067,0x52,0x6a,0x00,0x1c,0x1d, 960, 540, 0x30, 0x00, 0x00}, /* 0x2d 960x540 60Hz */
- {0x0077,0x53,0x6b,0x0b,0x1d,0x20, 960, 600, 0x30, 0x00, 0x00}, /* 0x2e 960x600 60Hz */
- {0x0087,0x1c,0x11,0x00,0x07,0x3a,1280,1024, 0x30, 0x00, 0x00}, /* 0x2f */
- {0x0137,0x1d,0x19,0x07,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x30 */
- {0x0107,0x1e,0x1e,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x31 */
- {0x0207,0x1f,0x20,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x32 */
- {0x0127,0x54,0x6d,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x33 1152x864-60Hz */
- {0x0127,0x44,0x19,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x34 1152x864-75Hz */
- {0x0127,0x4a,0x1e,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x35 1152x864-85Hz */
- {0xffff,0x00,0x00,0x00,0x00,0x00, 0, 0, 0, 0x00, 0x00}
+static const struct SiS_Ext2 SiSUSB_RefIndex[] = {
+ {0x085f, 0x0d, 0x03, 0x05, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x0 */
+ {0x0067, 0x0e, 0x04, 0x05, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x1 */
+ {0x0067, 0x0f, 0x08, 0x48, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x2 */
+ {0x0067, 0x10, 0x07, 0x8b, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x3 */
+ {0x0047, 0x11, 0x0a, 0x00, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x4 */
+ {0x0047, 0x12, 0x0d, 0x00, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x5 */
+ {0x0047, 0x13, 0x13, 0x00, 0x05, 0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x6 */
+ {0x0107, 0x14, 0x1c, 0x00, 0x05, 0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x7 */
+ {0xc85f, 0x05, 0x00, 0x04, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x8 */
+ {0xc067, 0x06, 0x02, 0x04, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x9 */
+ {0xc067, 0x07, 0x02, 0x47, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xa */
+ {0xc067, 0x08, 0x03, 0x8a, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xb */
+ {0xc047, 0x09, 0x05, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xc */
+ {0xc047, 0x0a, 0x09, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xd */
+ {0xc047, 0x0b, 0x0e, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xe */
+ {0xc047, 0x0c, 0x15, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xf */
+ {0x487f, 0x04, 0x00, 0x00, 0x00, 0x2f, 640, 400, 0x30, 0x55, 0x6e}, /* 0x10 */
+ {0xc06f, 0x3c, 0x01, 0x06, 0x13, 0x31, 720, 480, 0x30, 0x00, 0x00}, /* 0x11 */
+ {0x006f, 0x3d, 0x6f, 0x06, 0x14, 0x32, 720, 576, 0x30, 0x00, 0x00}, /* 0x12 (6f was 03) */
+ {0x0087, 0x15, 0x06, 0x00, 0x06, 0x38, 1024, 768, 0x30, 0x00, 0x00}, /* 0x13 */
+ {0xc877, 0x16, 0x0b, 0x06, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00}, /* 0x14 */
+ {0xc067, 0x17, 0x0f, 0x49, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00}, /* 0x15 */
+ {0x0067, 0x18, 0x11, 0x00, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00}, /* 0x16 */
+ {0x0047, 0x19, 0x16, 0x8c, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00}, /* 0x17 */
+ {0x0107, 0x1a, 0x1b, 0x00, 0x06, 0x38, 1024, 768, 0x10, 0x00, 0x00}, /* 0x18 */
+ {0x0107, 0x1b, 0x1f, 0x00, 0x06, 0x38, 1024, 768, 0x10, 0x00, 0x00}, /* 0x19 */
+ {0x407f, 0x00, 0x00, 0x00, 0x00, 0x41, 320, 200, 0x30, 0x56, 0x4e}, /* 0x1a */
+ {0xc07f, 0x01, 0x00, 0x04, 0x04, 0x50, 320, 240, 0x30, 0x00, 0x00}, /* 0x1b */
+ {0x007f, 0x02, 0x04, 0x05, 0x05, 0x51, 400, 300, 0x30, 0x00, 0x00}, /* 0x1c */
+ {0xc077, 0x03, 0x0b, 0x06, 0x06, 0x52, 512, 384, 0x30, 0x00, 0x00}, /* 0x1d */
+ {0x0077, 0x32, 0x40, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1e */
+ {0x0047, 0x33, 0x07, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1f */
+ {0x0047, 0x34, 0x0a, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x20 */
+ {0x0077, 0x35, 0x0b, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00}, /* 0x21 */
+ {0x0047, 0x36, 0x11, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00}, /* 0x22 */
+ {0x0047, 0x37, 0x16, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00}, /* 0x23 */
+ {0x1137, 0x38, 0x19, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00}, /* 0x24 */
+ {0x1107, 0x39, 0x1e, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00}, /* 0x25 */
+ {0x1307, 0x3a, 0x20, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00}, /* 0x26 */
+ {0x0077, 0x42, 0x5b, 0x08, 0x11, 0x23, 1280, 768, 0x30, 0x00, 0x00}, /* 0x27 */
+ {0x0087, 0x45, 0x57, 0x00, 0x16, 0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x28 38Hzi */
+ {0xc067, 0x46, 0x55, 0x0b, 0x16, 0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x29 848x480-60Hz */
+ {0x0087, 0x47, 0x57, 0x00, 0x17, 0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2a 856x480-38Hzi */
+ {0xc067, 0x48, 0x57, 0x00, 0x17, 0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2b 856x480-60Hz */
+ {0x006f, 0x4d, 0x71, 0x06, 0x15, 0x5f, 768, 576, 0x30, 0x00, 0x00}, /* 0x2c 768x576-56Hz */
+ {0x0067, 0x52, 0x6a, 0x00, 0x1c, 0x1d, 960, 540, 0x30, 0x00, 0x00}, /* 0x2d 960x540 60Hz */
+ {0x0077, 0x53, 0x6b, 0x0b, 0x1d, 0x20, 960, 600, 0x30, 0x00, 0x00}, /* 0x2e 960x600 60Hz */
+ {0x0087, 0x1c, 0x11, 0x00, 0x07, 0x3a, 1280, 1024, 0x30, 0x00, 0x00}, /* 0x2f */
+ {0x0137, 0x1d, 0x19, 0x07, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00}, /* 0x30 */
+ {0x0107, 0x1e, 0x1e, 0x00, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00}, /* 0x31 */
+ {0x0207, 0x1f, 0x20, 0x00, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00}, /* 0x32 */
+ {0x0127, 0x54, 0x6d, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00}, /* 0x33 1152x864-60Hz */
+ {0x0127, 0x44, 0x19, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00}, /* 0x34 1152x864-75Hz */
+ {0x0127, 0x4a, 0x1e, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00}, /* 0x35 1152x864-85Hz */
+ {0xffff, 0x00, 0x00, 0x00, 0x00, 0x00, 0, 0, 0, 0x00, 0x00}
};
-static const struct SiS_CRT1Table SiSUSB_CRT1Table[] =
-{
- {{0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
- 0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x00,
- 0x00}}, /* 0x0 */
- {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e,
- 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00,
- 0x00}}, /* 0x1 */
- {{0x3d,0x31,0x31,0x81,0x37,0x1f,0x72,0xf0,
- 0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x05,
- 0x01}}, /* 0x2 */
- {{0x4f,0x3f,0x3f,0x93,0x45,0x0d,0x24,0xf5,
- 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x01,
- 0x01}}, /* 0x3 */
- {{0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
- 0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x05,
- 0x00}}, /* 0x4 */
- {{0x5f,0x4f,0x4f,0x83,0x55,0x81,0x0b,0x3e,
- 0xe9,0x8b,0xdf,0xe8,0x0c,0x00,0x00,0x05,
- 0x00}}, /* 0x5 */
- {{0x63,0x4f,0x4f,0x87,0x56,0x9b,0x06,0x3e,
- 0xe8,0x8a,0xdf,0xe7,0x07,0x00,0x00,0x01,
- 0x00}}, /* 0x6 */
- {{0x64,0x4f,0x4f,0x88,0x55,0x9d,0xf2,0x1f,
- 0xe0,0x83,0xdf,0xdf,0xf3,0x10,0x00,0x01,
- 0x00}}, /* 0x7 */
- {{0x63,0x4f,0x4f,0x87,0x5a,0x81,0xfb,0x1f,
- 0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05,
- 0x00}}, /* 0x8 */
- {{0x65,0x4f,0x4f,0x89,0x58,0x80,0xfb,0x1f,
- 0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05,
- 0x61}}, /* 0x9 */
- {{0x65,0x4f,0x4f,0x89,0x58,0x80,0x01,0x3e,
- 0xe0,0x83,0xdf,0xdf,0x02,0x00,0x00,0x05,
- 0x61}}, /* 0xa */
- {{0x67,0x4f,0x4f,0x8b,0x58,0x81,0x0d,0x3e,
- 0xe0,0x83,0xdf,0xdf,0x0e,0x00,0x00,0x05,
- 0x61}}, /* 0xb */
- {{0x65,0x4f,0x4f,0x89,0x57,0x9f,0xfb,0x1f,
- 0xe6,0x8a,0xdf,0xdf,0xfc,0x10,0x00,0x01,
- 0x00}}, /* 0xc */
- {{0x7b,0x63,0x63,0x9f,0x6a,0x93,0x6f,0xf0,
- 0x58,0x8a,0x57,0x57,0x70,0x20,0x00,0x05,
- 0x01}}, /* 0xd */
- {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xf0,
- 0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x06,
- 0x01}}, /* 0xe */
- {{0x7d,0x63,0x63,0x81,0x6e,0x1d,0x98,0xf0,
- 0x7c,0x82,0x57,0x57,0x99,0x00,0x00,0x06,
- 0x01}}, /* 0xf */
- {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xf0,
- 0x58,0x8b,0x57,0x57,0x70,0x20,0x00,0x06,
- 0x01}}, /* 0x10 */
- {{0x7e,0x63,0x63,0x82,0x6b,0x13,0x75,0xf0,
- 0x58,0x8b,0x57,0x57,0x76,0x20,0x00,0x06,
- 0x01}}, /* 0x11 */
- {{0x81,0x63,0x63,0x85,0x6d,0x18,0x7a,0xf0,
- 0x58,0x8b,0x57,0x57,0x7b,0x20,0x00,0x06,
- 0x61}}, /* 0x12 */
- {{0x83,0x63,0x63,0x87,0x6e,0x19,0x81,0xf0,
- 0x58,0x8b,0x57,0x57,0x82,0x20,0x00,0x06,
- 0x61}}, /* 0x13 */
- {{0x85,0x63,0x63,0x89,0x6f,0x1a,0x91,0xf0,
- 0x58,0x8b,0x57,0x57,0x92,0x20,0x00,0x06,
- 0x61}}, /* 0x14 */
- {{0x99,0x7f,0x7f,0x9d,0x84,0x1a,0x96,0x1f,
- 0x7f,0x83,0x7f,0x7f,0x97,0x10,0x00,0x02,
- 0x00}}, /* 0x15 */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5,
- 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
- 0x01}}, /* 0x16 */
- {{0xa1,0x7f,0x7f,0x85,0x86,0x97,0x24,0xf5,
- 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
- 0x01}}, /* 0x17 */
- {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf5,
- 0x00,0x83,0xff,0xff,0x1f,0x10,0x00,0x02,
- 0x01}}, /* 0x18 */
- {{0xa7,0x7f,0x7f,0x8b,0x89,0x95,0x26,0xf5,
- 0x00,0x83,0xff,0xff,0x27,0x10,0x00,0x02,
- 0x01}}, /* 0x19 */
- {{0xa9,0x7f,0x7f,0x8d,0x8c,0x9a,0x2c,0xf5,
- 0x00,0x83,0xff,0xff,0x2d,0x14,0x00,0x02,
- 0x62}}, /* 0x1a */
- {{0xab,0x7f,0x7f,0x8f,0x8d,0x9b,0x35,0xf5,
- 0x00,0x83,0xff,0xff,0x36,0x14,0x00,0x02,
- 0x62}}, /* 0x1b */
- {{0xcf,0x9f,0x9f,0x93,0xb2,0x01,0x14,0xba,
- 0x00,0x83,0xff,0xff,0x15,0x00,0x00,0x03,
- 0x00}}, /* 0x1c */
- {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0x5a,
- 0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07,
- 0x01}}, /* 0x1d */
- {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0x5a,
- 0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07,
- 0x01}}, /* 0x1e */
- {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0x5a,
- 0x00,0x83,0xff,0xff,0x2f,0x09,0x00,0x07,
- 0x01}}, /* 0x1f */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
- 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
- 0x00}}, /* 0x20 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
- 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
- 0x00}}, /* 0x21 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
- 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
- 0x00}}, /* 0x22 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
- 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
- 0x00}}, /* 0x23 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
- 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
- 0x00}}, /* 0x24 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
- 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
- 0x00}}, /* 0x25 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
- 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
- 0x00}}, /* 0x26 */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
- 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
- 0x00}}, /* 0x27 */
- {{0x43,0xef,0xef,0x87,0x06,0x00,0xd4,0x1f,
- 0xa0,0x83,0x9f,0x9f,0xd5,0x1f,0x41,0x05,
- 0x63}}, /* 0x28 */
- {{0x45,0xef,0xef,0x89,0x07,0x01,0xd9,0x1f,
- 0xa0,0x83,0x9f,0x9f,0xda,0x1f,0x41,0x05,
- 0x63}}, /* 0x29 */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
- 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
- 0x00}}, /* 0x2a */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
- 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
- 0x00}}, /* 0x2b */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
- 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
- 0x00}}, /* 0x2c */
- {{0x59,0xff,0xff,0x9d,0x17,0x13,0x33,0xba,
- 0x00,0x83,0xff,0xff,0x34,0x0f,0x41,0x05,
- 0x44}}, /* 0x2d */
- {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x38,0xba,
- 0x00,0x83,0xff,0xff,0x39,0x0f,0x41,0x05,
- 0x44}}, /* 0x2e */
- {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x3d,0xba,
- 0x00,0x83,0xff,0xff,0x3e,0x0f,0x41,0x05,
- 0x44}}, /* 0x2f */
- {{0x5d,0xff,0xff,0x81,0x19,0x95,0x41,0xba,
- 0x00,0x84,0xff,0xff,0x42,0x0f,0x41,0x05,
- 0x44}}, /* 0x30 */
- {{0x55,0xff,0xff,0x99,0x0d,0x0c,0x3e,0xba,
- 0x00,0x84,0xff,0xff,0x3f,0x0f,0x41,0x05,
- 0x00}}, /* 0x31 */
- {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xba,
- 0x27,0x8b,0xdf,0xdf,0x73,0x00,0x00,0x06,
- 0x01}}, /* 0x32 */
- {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xba,
- 0x26,0x89,0xdf,0xdf,0x6f,0x00,0x00,0x06,
- 0x01}}, /* 0x33 */
- {{0x7f,0x63,0x63,0x82,0x6b,0x13,0x75,0xba,
- 0x29,0x8c,0xdf,0xdf,0x75,0x00,0x00,0x06,
- 0x01}}, /* 0x34 */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf1,
- 0xaf,0x85,0x3f,0x3f,0x25,0x30,0x00,0x02,
- 0x01}}, /* 0x35 */
- {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf1,
- 0xad,0x81,0x3f,0x3f,0x1f,0x30,0x00,0x02,
- 0x01}}, /* 0x36 */
- {{0xa7,0x7f,0x7f,0x88,0x89,0x95,0x26,0xf1,
- 0xb1,0x85,0x3f,0x3f,0x27,0x30,0x00,0x02,
- 0x01}}, /* 0x37 */
- {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0xc4,
- 0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07,
- 0x01}}, /* 0x38 */
- {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0xd4,
- 0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07,
- 0x01}}, /* 0x39 */
- {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0xd4,
- 0x7d,0x81,0xcf,0xcf,0x2f,0x21,0x00,0x07,
- 0x01}}, /* 0x3a */
- {{0xdc,0x9f,0x9f,0x80,0xaf,0x9d,0xe6,0xff,
- 0xc0,0x83,0xbf,0xbf,0xe7,0x10,0x00,0x07,
- 0x01}}, /* 0x3b */
- {{0x6b,0x59,0x59,0x8f,0x5e,0x8c,0x0b,0x3e,
- 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x05,
- 0x00}}, /* 0x3c */
- {{0x6d,0x59,0x59,0x91,0x60,0x89,0x53,0xf0,
- 0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05,
- 0x41}}, /* 0x3d */
- {{0x86,0x6a,0x6a,0x8a,0x74,0x06,0x8c,0x15,
- 0x4f,0x83,0xef,0xef,0x8d,0x30,0x00,0x02,
- 0x00}}, /* 0x3e */
- {{0x81,0x6a,0x6a,0x85,0x70,0x00,0x0f,0x3e,
- 0xeb,0x8e,0xdf,0xdf,0x10,0x00,0x00,0x02,
- 0x00}}, /* 0x3f */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x1e,0xf1,
- 0xae,0x85,0x57,0x57,0x1f,0x30,0x00,0x02,
- 0x01}}, /* 0x40 */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5,
- 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
- 0x01}}, /* 0x41 */
- {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x20,0xf5,
- 0x03,0x88,0xff,0xff,0x21,0x10,0x00,0x07,
- 0x01}}, /* 0x42 */
- {{0xe6,0xae,0xae,0x8a,0xbd,0x90,0x3d,0x10,
- 0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x00,0x03,
- 0x00}}, /* 0x43 */
- {{0xc3,0x8f,0x8f,0x87,0x9b,0x0b,0x82,0xef,
- 0x60,0x83,0x5f,0x5f,0x83,0x10,0x00,0x07,
- 0x01}}, /* 0x44 */
- {{0x86,0x69,0x69,0x8A,0x74,0x06,0x8C,0x15,
- 0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02,
- 0x00}}, /* 0x45 */
- {{0x83,0x69,0x69,0x87,0x6f,0x1d,0x03,0x3E,
- 0xE5,0x8d,0xDF,0xe4,0x04,0x00,0x00,0x06,
- 0x00}}, /* 0x46 */
- {{0x86,0x6A,0x6A,0x8A,0x74,0x06,0x8C,0x15,
- 0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02,
- 0x00}}, /* 0x47 */
- {{0x81,0x6A,0x6A,0x85,0x70,0x00,0x0F,0x3E,
- 0xEB,0x8E,0xDF,0xDF,0x10,0x00,0x00,0x02,
- 0x00}}, /* 0x48 */
- {{0xdd,0xa9,0xa9,0x81,0xb4,0x97,0x26,0xfd,
- 0x01,0x8d,0xff,0x00,0x27,0x10,0x00,0x03,
- 0x01}}, /* 0x49 */
- {{0xd9,0x8f,0x8f,0x9d,0xba,0x0a,0x8a,0xff,
- 0x60,0x8b,0x5f,0x5f,0x8b,0x10,0x00,0x03,
- 0x01}}, /* 0x4a */
- {{0xea,0xae,0xae,0x8e,0xba,0x82,0x40,0x10,
- 0x1b,0x87,0x19,0x1a,0x41,0x0f,0x00,0x03,
- 0x00}}, /* 0x4b */
- {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0xf1,0xff,
- 0xc0,0x83,0xbf,0xbf,0xf2,0x10,0x00,0x07,
- 0x01}}, /* 0x4c */
- {{0x75,0x5f,0x5f,0x99,0x66,0x90,0x53,0xf0,
- 0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05,
- 0x41}},
- {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e,
- 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00,
- 0x00}}, /* 0x4e */
- {{0xcd,0x9f,0x9f,0x91,0xab,0x1c,0x3a,0xff,
- 0x20,0x83,0x1f,0x1f,0x3b,0x10,0x00,0x07,
- 0x21}}, /* 0x4f */
- {{0x15,0xd1,0xd1,0x99,0xe2,0x19,0x3d,0x10,
- 0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x01,0x0c,
- 0x20}}, /* 0x50 */
- {{0x0e,0xef,0xef,0x92,0xfe,0x03,0x30,0xf0,
- 0x1e,0x83,0x1b,0x1c,0x31,0x00,0x01,0x00,
- 0x61}}, /* 0x51 */
- {{0x85,0x77,0x77,0x89,0x7d,0x01,0x31,0xf0,
- 0x1e,0x84,0x1b,0x1c,0x32,0x00,0x00,0x02,
- 0x41}}, /* 0x52 */
- {{0x87,0x77,0x77,0x8b,0x81,0x0b,0x68,0xf0,
- 0x5a,0x80,0x57,0x57,0x69,0x00,0x00,0x02,
- 0x01}}, /* 0x53 */
- {{0xcd,0x8f,0x8f,0x91,0x9b,0x1b,0x7a,0xff,
- 0x64,0x8c,0x5f,0x62,0x7b,0x10,0x00,0x07,
- 0x41}} /* 0x54 */
+static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = {
+ {{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
+ 0x9c, 0x8e, 0x8f, 0x96, 0xb9, 0x30, 0x00, 0x00,
+ 0x00}}, /* 0x0 */
+ {{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0x0b, 0x3e,
+ 0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x00,
+ 0x00}}, /* 0x1 */
+ {{0x3d, 0x31, 0x31, 0x81, 0x37, 0x1f, 0x72, 0xf0,
+ 0x58, 0x8c, 0x57, 0x57, 0x73, 0x20, 0x00, 0x05,
+ 0x01}}, /* 0x2 */
+ {{0x4f, 0x3f, 0x3f, 0x93, 0x45, 0x0d, 0x24, 0xf5,
+ 0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x01,
+ 0x01}}, /* 0x3 */
+ {{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+ 0x9c, 0x8e, 0x8f, 0x96, 0xb9, 0x30, 0x00, 0x05,
+ 0x00}}, /* 0x4 */
+ {{0x5f, 0x4f, 0x4f, 0x83, 0x55, 0x81, 0x0b, 0x3e,
+ 0xe9, 0x8b, 0xdf, 0xe8, 0x0c, 0x00, 0x00, 0x05,
+ 0x00}}, /* 0x5 */
+ {{0x63, 0x4f, 0x4f, 0x87, 0x56, 0x9b, 0x06, 0x3e,
+ 0xe8, 0x8a, 0xdf, 0xe7, 0x07, 0x00, 0x00, 0x01,
+ 0x00}}, /* 0x6 */
+ {{0x64, 0x4f, 0x4f, 0x88, 0x55, 0x9d, 0xf2, 0x1f,
+ 0xe0, 0x83, 0xdf, 0xdf, 0xf3, 0x10, 0x00, 0x01,
+ 0x00}}, /* 0x7 */
+ {{0x63, 0x4f, 0x4f, 0x87, 0x5a, 0x81, 0xfb, 0x1f,
+ 0xe0, 0x83, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x05,
+ 0x00}}, /* 0x8 */
+ {{0x65, 0x4f, 0x4f, 0x89, 0x58, 0x80, 0xfb, 0x1f,
+ 0xe0, 0x83, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x05,
+ 0x61}}, /* 0x9 */
+ {{0x65, 0x4f, 0x4f, 0x89, 0x58, 0x80, 0x01, 0x3e,
+ 0xe0, 0x83, 0xdf, 0xdf, 0x02, 0x00, 0x00, 0x05,
+ 0x61}}, /* 0xa */
+ {{0x67, 0x4f, 0x4f, 0x8b, 0x58, 0x81, 0x0d, 0x3e,
+ 0xe0, 0x83, 0xdf, 0xdf, 0x0e, 0x00, 0x00, 0x05,
+ 0x61}}, /* 0xb */
+ {{0x65, 0x4f, 0x4f, 0x89, 0x57, 0x9f, 0xfb, 0x1f,
+ 0xe6, 0x8a, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x01,
+ 0x00}}, /* 0xc */
+ {{0x7b, 0x63, 0x63, 0x9f, 0x6a, 0x93, 0x6f, 0xf0,
+ 0x58, 0x8a, 0x57, 0x57, 0x70, 0x20, 0x00, 0x05,
+ 0x01}}, /* 0xd */
+ {{0x7f, 0x63, 0x63, 0x83, 0x6c, 0x1c, 0x72, 0xf0,
+ 0x58, 0x8c, 0x57, 0x57, 0x73, 0x20, 0x00, 0x06,
+ 0x01}}, /* 0xe */
+ {{0x7d, 0x63, 0x63, 0x81, 0x6e, 0x1d, 0x98, 0xf0,
+ 0x7c, 0x82, 0x57, 0x57, 0x99, 0x00, 0x00, 0x06,
+ 0x01}}, /* 0xf */
+ {{0x7f, 0x63, 0x63, 0x83, 0x69, 0x13, 0x6f, 0xf0,
+ 0x58, 0x8b, 0x57, 0x57, 0x70, 0x20, 0x00, 0x06,
+ 0x01}}, /* 0x10 */
+ {{0x7e, 0x63, 0x63, 0x82, 0x6b, 0x13, 0x75, 0xf0,
+ 0x58, 0x8b, 0x57, 0x57, 0x76, 0x20, 0x00, 0x06,
+ 0x01}}, /* 0x11 */
+ {{0x81, 0x63, 0x63, 0x85, 0x6d, 0x18, 0x7a, 0xf0,
+ 0x58, 0x8b, 0x57, 0x57, 0x7b, 0x20, 0x00, 0x06,
+ 0x61}}, /* 0x12 */
+ {{0x83, 0x63, 0x63, 0x87, 0x6e, 0x19, 0x81, 0xf0,
+ 0x58, 0x8b, 0x57, 0x57, 0x82, 0x20, 0x00, 0x06,
+ 0x61}}, /* 0x13 */
+ {{0x85, 0x63, 0x63, 0x89, 0x6f, 0x1a, 0x91, 0xf0,
+ 0x58, 0x8b, 0x57, 0x57, 0x92, 0x20, 0x00, 0x06,
+ 0x61}}, /* 0x14 */
+ {{0x99, 0x7f, 0x7f, 0x9d, 0x84, 0x1a, 0x96, 0x1f,
+ 0x7f, 0x83, 0x7f, 0x7f, 0x97, 0x10, 0x00, 0x02,
+ 0x00}}, /* 0x15 */
+ {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf5,
+ 0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+ 0x01}}, /* 0x16 */
+ {{0xa1, 0x7f, 0x7f, 0x85, 0x86, 0x97, 0x24, 0xf5,
+ 0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+ 0x01}}, /* 0x17 */
+ {{0x9f, 0x7f, 0x7f, 0x83, 0x85, 0x91, 0x1e, 0xf5,
+ 0x00, 0x83, 0xff, 0xff, 0x1f, 0x10, 0x00, 0x02,
+ 0x01}}, /* 0x18 */
+ {{0xa7, 0x7f, 0x7f, 0x8b, 0x89, 0x95, 0x26, 0xf5,
+ 0x00, 0x83, 0xff, 0xff, 0x27, 0x10, 0x00, 0x02,
+ 0x01}}, /* 0x19 */
+ {{0xa9, 0x7f, 0x7f, 0x8d, 0x8c, 0x9a, 0x2c, 0xf5,
+ 0x00, 0x83, 0xff, 0xff, 0x2d, 0x14, 0x00, 0x02,
+ 0x62}}, /* 0x1a */
+ {{0xab, 0x7f, 0x7f, 0x8f, 0x8d, 0x9b, 0x35, 0xf5,
+ 0x00, 0x83, 0xff, 0xff, 0x36, 0x14, 0x00, 0x02,
+ 0x62}}, /* 0x1b */
+ {{0xcf, 0x9f, 0x9f, 0x93, 0xb2, 0x01, 0x14, 0xba,
+ 0x00, 0x83, 0xff, 0xff, 0x15, 0x00, 0x00, 0x03,
+ 0x00}}, /* 0x1c */
+ {{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x28, 0x5a,
+ 0x00, 0x83, 0xff, 0xff, 0x29, 0x09, 0x00, 0x07,
+ 0x01}}, /* 0x1d */
+ {{0xce, 0x9f, 0x9f, 0x92, 0xa5, 0x17, 0x28, 0x5a,
+ 0x00, 0x83, 0xff, 0xff, 0x29, 0x09, 0x00, 0x07,
+ 0x01}}, /* 0x1e */
+ {{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0x2e, 0x5a,
+ 0x00, 0x83, 0xff, 0xff, 0x2f, 0x09, 0x00, 0x07,
+ 0x01}}, /* 0x1f */
+ {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+ 0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+ 0x00}}, /* 0x20 */
+ {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+ 0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+ 0x00}}, /* 0x21 */
+ {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+ 0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+ 0x00}}, /* 0x22 */
+ {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+ 0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+ 0x00}}, /* 0x23 */
+ {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+ 0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+ 0x00}}, /* 0x24 */
+ {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+ 0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+ 0x00}}, /* 0x25 */
+ {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+ 0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+ 0x00}}, /* 0x26 */
+ {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+ 0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+ 0x00}}, /* 0x27 */
+ {{0x43, 0xef, 0xef, 0x87, 0x06, 0x00, 0xd4, 0x1f,
+ 0xa0, 0x83, 0x9f, 0x9f, 0xd5, 0x1f, 0x41, 0x05,
+ 0x63}}, /* 0x28 */
+ {{0x45, 0xef, 0xef, 0x89, 0x07, 0x01, 0xd9, 0x1f,
+ 0xa0, 0x83, 0x9f, 0x9f, 0xda, 0x1f, 0x41, 0x05,
+ 0x63}}, /* 0x29 */
+ {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+ 0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+ 0x00}}, /* 0x2a */
+ {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+ 0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+ 0x00}}, /* 0x2b */
+ {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+ 0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+ 0x00}}, /* 0x2c */
+ {{0x59, 0xff, 0xff, 0x9d, 0x17, 0x13, 0x33, 0xba,
+ 0x00, 0x83, 0xff, 0xff, 0x34, 0x0f, 0x41, 0x05,
+ 0x44}}, /* 0x2d */
+ {{0x5b, 0xff, 0xff, 0x9f, 0x18, 0x14, 0x38, 0xba,
+ 0x00, 0x83, 0xff, 0xff, 0x39, 0x0f, 0x41, 0x05,
+ 0x44}}, /* 0x2e */
+ {{0x5b, 0xff, 0xff, 0x9f, 0x18, 0x14, 0x3d, 0xba,
+ 0x00, 0x83, 0xff, 0xff, 0x3e, 0x0f, 0x41, 0x05,
+ 0x44}}, /* 0x2f */
+ {{0x5d, 0xff, 0xff, 0x81, 0x19, 0x95, 0x41, 0xba,
+ 0x00, 0x84, 0xff, 0xff, 0x42, 0x0f, 0x41, 0x05,
+ 0x44}}, /* 0x30 */
+ {{0x55, 0xff, 0xff, 0x99, 0x0d, 0x0c, 0x3e, 0xba,
+ 0x00, 0x84, 0xff, 0xff, 0x3f, 0x0f, 0x41, 0x05,
+ 0x00}}, /* 0x31 */
+ {{0x7f, 0x63, 0x63, 0x83, 0x6c, 0x1c, 0x72, 0xba,
+ 0x27, 0x8b, 0xdf, 0xdf, 0x73, 0x00, 0x00, 0x06,
+ 0x01}}, /* 0x32 */
+ {{0x7f, 0x63, 0x63, 0x83, 0x69, 0x13, 0x6f, 0xba,
+ 0x26, 0x89, 0xdf, 0xdf, 0x6f, 0x00, 0x00, 0x06,
+ 0x01}}, /* 0x33 */
+ {{0x7f, 0x63, 0x63, 0x82, 0x6b, 0x13, 0x75, 0xba,
+ 0x29, 0x8c, 0xdf, 0xdf, 0x75, 0x00, 0x00, 0x06,
+ 0x01}}, /* 0x34 */
+ {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf1,
+ 0xaf, 0x85, 0x3f, 0x3f, 0x25, 0x30, 0x00, 0x02,
+ 0x01}}, /* 0x35 */
+ {{0x9f, 0x7f, 0x7f, 0x83, 0x85, 0x91, 0x1e, 0xf1,
+ 0xad, 0x81, 0x3f, 0x3f, 0x1f, 0x30, 0x00, 0x02,
+ 0x01}}, /* 0x36 */
+ {{0xa7, 0x7f, 0x7f, 0x88, 0x89, 0x95, 0x26, 0xf1,
+ 0xb1, 0x85, 0x3f, 0x3f, 0x27, 0x30, 0x00, 0x02,
+ 0x01}}, /* 0x37 */
+ {{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x28, 0xc4,
+ 0x7a, 0x8e, 0xcf, 0xcf, 0x29, 0x21, 0x00, 0x07,
+ 0x01}}, /* 0x38 */
+ {{0xce, 0x9f, 0x9f, 0x92, 0xa5, 0x17, 0x28, 0xd4,
+ 0x7a, 0x8e, 0xcf, 0xcf, 0x29, 0x21, 0x00, 0x07,
+ 0x01}}, /* 0x39 */
+ {{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0x2e, 0xd4,
+ 0x7d, 0x81, 0xcf, 0xcf, 0x2f, 0x21, 0x00, 0x07,
+ 0x01}}, /* 0x3a */
+ {{0xdc, 0x9f, 0x9f, 0x80, 0xaf, 0x9d, 0xe6, 0xff,
+ 0xc0, 0x83, 0xbf, 0xbf, 0xe7, 0x10, 0x00, 0x07,
+ 0x01}}, /* 0x3b */
+ {{0x6b, 0x59, 0x59, 0x8f, 0x5e, 0x8c, 0x0b, 0x3e,
+ 0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x05,
+ 0x00}}, /* 0x3c */
+ {{0x6d, 0x59, 0x59, 0x91, 0x60, 0x89, 0x53, 0xf0,
+ 0x41, 0x84, 0x3f, 0x3f, 0x54, 0x00, 0x00, 0x05,
+ 0x41}}, /* 0x3d */
+ {{0x86, 0x6a, 0x6a, 0x8a, 0x74, 0x06, 0x8c, 0x15,
+ 0x4f, 0x83, 0xef, 0xef, 0x8d, 0x30, 0x00, 0x02,
+ 0x00}}, /* 0x3e */
+ {{0x81, 0x6a, 0x6a, 0x85, 0x70, 0x00, 0x0f, 0x3e,
+ 0xeb, 0x8e, 0xdf, 0xdf, 0x10, 0x00, 0x00, 0x02,
+ 0x00}}, /* 0x3f */
+ {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x1e, 0xf1,
+ 0xae, 0x85, 0x57, 0x57, 0x1f, 0x30, 0x00, 0x02,
+ 0x01}}, /* 0x40 */
+ {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf5,
+ 0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+ 0x01}}, /* 0x41 */
+ {{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x20, 0xf5,
+ 0x03, 0x88, 0xff, 0xff, 0x21, 0x10, 0x00, 0x07,
+ 0x01}}, /* 0x42 */
+ {{0xe6, 0xae, 0xae, 0x8a, 0xbd, 0x90, 0x3d, 0x10,
+ 0x1a, 0x8d, 0x19, 0x19, 0x3e, 0x2f, 0x00, 0x03,
+ 0x00}}, /* 0x43 */
+ {{0xc3, 0x8f, 0x8f, 0x87, 0x9b, 0x0b, 0x82, 0xef,
+ 0x60, 0x83, 0x5f, 0x5f, 0x83, 0x10, 0x00, 0x07,
+ 0x01}}, /* 0x44 */
+ {{0x86, 0x69, 0x69, 0x8A, 0x74, 0x06, 0x8C, 0x15,
+ 0x4F, 0x83, 0xEF, 0xEF, 0x8D, 0x30, 0x00, 0x02,
+ 0x00}}, /* 0x45 */
+ {{0x83, 0x69, 0x69, 0x87, 0x6f, 0x1d, 0x03, 0x3E,
+ 0xE5, 0x8d, 0xDF, 0xe4, 0x04, 0x00, 0x00, 0x06,
+ 0x00}}, /* 0x46 */
+ {{0x86, 0x6A, 0x6A, 0x8A, 0x74, 0x06, 0x8C, 0x15,
+ 0x4F, 0x83, 0xEF, 0xEF, 0x8D, 0x30, 0x00, 0x02,
+ 0x00}}, /* 0x47 */
+ {{0x81, 0x6A, 0x6A, 0x85, 0x70, 0x00, 0x0F, 0x3E,
+ 0xEB, 0x8E, 0xDF, 0xDF, 0x10, 0x00, 0x00, 0x02,
+ 0x00}}, /* 0x48 */
+ {{0xdd, 0xa9, 0xa9, 0x81, 0xb4, 0x97, 0x26, 0xfd,
+ 0x01, 0x8d, 0xff, 0x00, 0x27, 0x10, 0x00, 0x03,
+ 0x01}}, /* 0x49 */
+ {{0xd9, 0x8f, 0x8f, 0x9d, 0xba, 0x0a, 0x8a, 0xff,
+ 0x60, 0x8b, 0x5f, 0x5f, 0x8b, 0x10, 0x00, 0x03,
+ 0x01}}, /* 0x4a */
+ {{0xea, 0xae, 0xae, 0x8e, 0xba, 0x82, 0x40, 0x10,
+ 0x1b, 0x87, 0x19, 0x1a, 0x41, 0x0f, 0x00, 0x03,
+ 0x00}}, /* 0x4b */
+ {{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0xf1, 0xff,
+ 0xc0, 0x83, 0xbf, 0xbf, 0xf2, 0x10, 0x00, 0x07,
+ 0x01}}, /* 0x4c */
+ {{0x75, 0x5f, 0x5f, 0x99, 0x66, 0x90, 0x53, 0xf0,
+ 0x41, 0x84, 0x3f, 0x3f, 0x54, 0x00, 0x00, 0x05,
+ 0x41}},
+ {{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0x0b, 0x3e,
+ 0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x00,
+ 0x00}}, /* 0x4e */
+ {{0xcd, 0x9f, 0x9f, 0x91, 0xab, 0x1c, 0x3a, 0xff,
+ 0x20, 0x83, 0x1f, 0x1f, 0x3b, 0x10, 0x00, 0x07,
+ 0x21}}, /* 0x4f */
+ {{0x15, 0xd1, 0xd1, 0x99, 0xe2, 0x19, 0x3d, 0x10,
+ 0x1a, 0x8d, 0x19, 0x19, 0x3e, 0x2f, 0x01, 0x0c,
+ 0x20}}, /* 0x50 */
+ {{0x0e, 0xef, 0xef, 0x92, 0xfe, 0x03, 0x30, 0xf0,
+ 0x1e, 0x83, 0x1b, 0x1c, 0x31, 0x00, 0x01, 0x00,
+ 0x61}}, /* 0x51 */
+ {{0x85, 0x77, 0x77, 0x89, 0x7d, 0x01, 0x31, 0xf0,
+ 0x1e, 0x84, 0x1b, 0x1c, 0x32, 0x00, 0x00, 0x02,
+ 0x41}}, /* 0x52 */
+ {{0x87, 0x77, 0x77, 0x8b, 0x81, 0x0b, 0x68, 0xf0,
+ 0x5a, 0x80, 0x57, 0x57, 0x69, 0x00, 0x00, 0x02,
+ 0x01}}, /* 0x53 */
+ {{0xcd, 0x8f, 0x8f, 0x91, 0x9b, 0x1b, 0x7a, 0xff,
+ 0x64, 0x8c, 0x5f, 0x62, 0x7b, 0x10, 0x00, 0x07,
+ 0x41}} /* 0x54 */
};
-static const struct SiS_VCLKData SiSUSB_VCLKData[] =
-{
- { 0x1b,0xe1, 25}, /* 0x00 */
- { 0x4e,0xe4, 28}, /* 0x01 */
- { 0x57,0xe4, 31}, /* 0x02 */
- { 0xc3,0xc8, 36}, /* 0x03 */
- { 0x42,0xe2, 40}, /* 0x04 */
- { 0xfe,0xcd, 43}, /* 0x05 */
- { 0x5d,0xc4, 44}, /* 0x06 */
- { 0x52,0xe2, 49}, /* 0x07 */
- { 0x53,0xe2, 50}, /* 0x08 */
- { 0x74,0x67, 52}, /* 0x09 */
- { 0x6d,0x66, 56}, /* 0x0a */
- { 0x5a,0x64, 65}, /* 0x0b */
- { 0x46,0x44, 67}, /* 0x0c */
- { 0xb1,0x46, 68}, /* 0x0d */
- { 0xd3,0x4a, 72}, /* 0x0e */
- { 0x29,0x61, 75}, /* 0x0f */
- { 0x6e,0x46, 76}, /* 0x10 */
- { 0x2b,0x61, 78}, /* 0x11 */
- { 0x31,0x42, 79}, /* 0x12 */
- { 0xab,0x44, 83}, /* 0x13 */
- { 0x46,0x25, 84}, /* 0x14 */
- { 0x78,0x29, 86}, /* 0x15 */
- { 0x62,0x44, 94}, /* 0x16 */
- { 0x2b,0x41,104}, /* 0x17 */
- { 0x3a,0x23,105}, /* 0x18 */
- { 0x70,0x44,108}, /* 0x19 */
- { 0x3c,0x23,109}, /* 0x1a */
- { 0x5e,0x43,113}, /* 0x1b */
- { 0xbc,0x44,116}, /* 0x1c */
- { 0xe0,0x46,132}, /* 0x1d */
- { 0x54,0x42,135}, /* 0x1e */
- { 0xea,0x2a,139}, /* 0x1f */
- { 0x41,0x22,157}, /* 0x20 */
- { 0x70,0x24,162}, /* 0x21 */
- { 0x30,0x21,175}, /* 0x22 */
- { 0x4e,0x22,189}, /* 0x23 */
- { 0xde,0x26,194}, /* 0x24 */
- { 0x62,0x06,202}, /* 0x25 */
- { 0x3f,0x03,229}, /* 0x26 */
- { 0xb8,0x06,234}, /* 0x27 */
- { 0x34,0x02,253}, /* 0x28 */
- { 0x58,0x04,255}, /* 0x29 */
- { 0x24,0x01,265}, /* 0x2a */
- { 0x9b,0x02,267}, /* 0x2b */
- { 0x70,0x05,270}, /* 0x2c */
- { 0x25,0x01,272}, /* 0x2d */
- { 0x9c,0x02,277}, /* 0x2e */
- { 0x27,0x01,286}, /* 0x2f */
- { 0x3c,0x02,291}, /* 0x30 */
- { 0xef,0x0a,292}, /* 0x31 */
- { 0xf6,0x0a,310}, /* 0x32 */
- { 0x95,0x01,315}, /* 0x33 */
- { 0xf0,0x09,324}, /* 0x34 */
- { 0xfe,0x0a,331}, /* 0x35 */
- { 0xf3,0x09,332}, /* 0x36 */
- { 0xea,0x08,340}, /* 0x37 */
- { 0xe8,0x07,376}, /* 0x38 */
- { 0xde,0x06,389}, /* 0x39 */
- { 0x52,0x2a, 54}, /* 0x3a 301 TV */
- { 0x52,0x6a, 27}, /* 0x3b 301 TV */
- { 0x62,0x24, 70}, /* 0x3c 301 TV */
- { 0x62,0x64, 70}, /* 0x3d 301 TV */
- { 0xa8,0x4c, 30}, /* 0x3e 301 TV */
- { 0x20,0x26, 33}, /* 0x3f 301 TV */
- { 0x31,0xc2, 39}, /* 0x40 */
- { 0x60,0x36, 30}, /* 0x41 Chrontel */
- { 0x40,0x4a, 28}, /* 0x42 Chrontel */
- { 0x9f,0x46, 44}, /* 0x43 Chrontel */
- { 0x97,0x2c, 26}, /* 0x44 */
- { 0x44,0xe4, 25}, /* 0x45 Chrontel */
- { 0x7e,0x32, 47}, /* 0x46 Chrontel */
- { 0x8a,0x24, 31}, /* 0x47 Chrontel */
- { 0x97,0x2c, 26}, /* 0x48 Chrontel */
- { 0xce,0x3c, 39}, /* 0x49 */
- { 0x52,0x4a, 36}, /* 0x4a Chrontel */
- { 0x34,0x61, 95}, /* 0x4b */
- { 0x78,0x27,108}, /* 0x4c - was 102 */
- { 0x66,0x43,123}, /* 0x4d Modes 0x26-0x28 (1400x1050) */
- { 0x41,0x4e, 21}, /* 0x4e */
- { 0xa1,0x4a, 29}, /* 0x4f Chrontel */
- { 0x19,0x42, 42}, /* 0x50 */
- { 0x54,0x46, 58}, /* 0x51 Chrontel */
- { 0x25,0x42, 61}, /* 0x52 */
- { 0x44,0x44, 66}, /* 0x53 Chrontel */
- { 0x3a,0x62, 70}, /* 0x54 Chrontel */
- { 0x62,0xc6, 34}, /* 0x55 848x480-60 */
- { 0x6a,0xc6, 37}, /* 0x56 848x480-75 - TEMP */
- { 0xbf,0xc8, 35}, /* 0x57 856x480-38i,60 */
- { 0x30,0x23, 88}, /* 0x58 1360x768-62 (is 60Hz!) */
- { 0x52,0x07,149}, /* 0x59 1280x960-85 */
- { 0x56,0x07,156}, /* 0x5a 1400x1050-75 */
- { 0x70,0x29, 81}, /* 0x5b 1280x768 LCD */
- { 0x45,0x25, 83}, /* 0x5c 1280x800 */
- { 0x70,0x0a,147}, /* 0x5d 1680x1050 */
- { 0x70,0x24,162}, /* 0x5e 1600x1200 */
- { 0x5a,0x64, 65}, /* 0x5f 1280x720 - temp */
- { 0x63,0x46, 68}, /* 0x60 1280x768_2 */
- { 0x31,0x42, 79}, /* 0x61 1280x768_3 - temp */
- { 0, 0, 0}, /* 0x62 - custom (will be filled out at run-time) */
- { 0x5a,0x64, 65}, /* 0x63 1280x720 (LCD LVDS) */
- { 0x70,0x28, 90}, /* 0x64 1152x864@60 */
- { 0x41,0xc4, 32}, /* 0x65 848x480@60 */
- { 0x5c,0xc6, 32}, /* 0x66 856x480@60 */
- { 0x76,0xe7, 27}, /* 0x67 720x480@60 */
- { 0x5f,0xc6, 33}, /* 0x68 720/768x576@60 */
- { 0x52,0x27, 75}, /* 0x69 1920x1080i 60Hz interlaced */
- { 0x7c,0x6b, 38}, /* 0x6a 960x540@60 */
- { 0xe3,0x56, 41}, /* 0x6b 960x600@60 */
- { 0x45,0x25, 83}, /* 0x6c 1280x800 */
- { 0x70,0x28, 90}, /* 0x6d 1152x864@60 */
- { 0x15,0xe1, 20}, /* 0x6e 640x400@60 (fake, not actually used) */
- { 0x5f,0xc6, 33}, /* 0x6f 720x576@60 */
- { 0x37,0x5a, 10}, /* 0x70 320x200@60 (fake, not actually used) */
- { 0x2b,0xc2, 35} /* 0x71 768@576@60 */
+static const struct SiS_VCLKData SiSUSB_VCLKData[] = {
+ {0x1b, 0xe1, 25}, /* 0x00 */
+ {0x4e, 0xe4, 28}, /* 0x01 */
+ {0x57, 0xe4, 31}, /* 0x02 */
+ {0xc3, 0xc8, 36}, /* 0x03 */
+ {0x42, 0xe2, 40}, /* 0x04 */
+ {0xfe, 0xcd, 43}, /* 0x05 */
+ {0x5d, 0xc4, 44}, /* 0x06 */
+ {0x52, 0xe2, 49}, /* 0x07 */
+ {0x53, 0xe2, 50}, /* 0x08 */
+ {0x74, 0x67, 52}, /* 0x09 */
+ {0x6d, 0x66, 56}, /* 0x0a */
+ {0x5a, 0x64, 65}, /* 0x0b */
+ {0x46, 0x44, 67}, /* 0x0c */
+ {0xb1, 0x46, 68}, /* 0x0d */
+ {0xd3, 0x4a, 72}, /* 0x0e */
+ {0x29, 0x61, 75}, /* 0x0f */
+ {0x6e, 0x46, 76}, /* 0x10 */
+ {0x2b, 0x61, 78}, /* 0x11 */
+ {0x31, 0x42, 79}, /* 0x12 */
+ {0xab, 0x44, 83}, /* 0x13 */
+ {0x46, 0x25, 84}, /* 0x14 */
+ {0x78, 0x29, 86}, /* 0x15 */
+ {0x62, 0x44, 94}, /* 0x16 */
+ {0x2b, 0x41, 104}, /* 0x17 */
+ {0x3a, 0x23, 105}, /* 0x18 */
+ {0x70, 0x44, 108}, /* 0x19 */
+ {0x3c, 0x23, 109}, /* 0x1a */
+ {0x5e, 0x43, 113}, /* 0x1b */
+ {0xbc, 0x44, 116}, /* 0x1c */
+ {0xe0, 0x46, 132}, /* 0x1d */
+ {0x54, 0x42, 135}, /* 0x1e */
+ {0xea, 0x2a, 139}, /* 0x1f */
+ {0x41, 0x22, 157}, /* 0x20 */
+ {0x70, 0x24, 162}, /* 0x21 */
+ {0x30, 0x21, 175}, /* 0x22 */
+ {0x4e, 0x22, 189}, /* 0x23 */
+ {0xde, 0x26, 194}, /* 0x24 */
+ {0x62, 0x06, 202}, /* 0x25 */
+ {0x3f, 0x03, 229}, /* 0x26 */
+ {0xb8, 0x06, 234}, /* 0x27 */
+ {0x34, 0x02, 253}, /* 0x28 */
+ {0x58, 0x04, 255}, /* 0x29 */
+ {0x24, 0x01, 265}, /* 0x2a */
+ {0x9b, 0x02, 267}, /* 0x2b */
+ {0x70, 0x05, 270}, /* 0x2c */
+ {0x25, 0x01, 272}, /* 0x2d */
+ {0x9c, 0x02, 277}, /* 0x2e */
+ {0x27, 0x01, 286}, /* 0x2f */
+ {0x3c, 0x02, 291}, /* 0x30 */
+ {0xef, 0x0a, 292}, /* 0x31 */
+ {0xf6, 0x0a, 310}, /* 0x32 */
+ {0x95, 0x01, 315}, /* 0x33 */
+ {0xf0, 0x09, 324}, /* 0x34 */
+ {0xfe, 0x0a, 331}, /* 0x35 */
+ {0xf3, 0x09, 332}, /* 0x36 */
+ {0xea, 0x08, 340}, /* 0x37 */
+ {0xe8, 0x07, 376}, /* 0x38 */
+ {0xde, 0x06, 389}, /* 0x39 */
+ {0x52, 0x2a, 54}, /* 0x3a 301 TV */
+ {0x52, 0x6a, 27}, /* 0x3b 301 TV */
+ {0x62, 0x24, 70}, /* 0x3c 301 TV */
+ {0x62, 0x64, 70}, /* 0x3d 301 TV */
+ {0xa8, 0x4c, 30}, /* 0x3e 301 TV */
+ {0x20, 0x26, 33}, /* 0x3f 301 TV */
+ {0x31, 0xc2, 39}, /* 0x40 */
+ {0x60, 0x36, 30}, /* 0x41 Chrontel */
+ {0x40, 0x4a, 28}, /* 0x42 Chrontel */
+ {0x9f, 0x46, 44}, /* 0x43 Chrontel */
+ {0x97, 0x2c, 26}, /* 0x44 */
+ {0x44, 0xe4, 25}, /* 0x45 Chrontel */
+ {0x7e, 0x32, 47}, /* 0x46 Chrontel */
+ {0x8a, 0x24, 31}, /* 0x47 Chrontel */
+ {0x97, 0x2c, 26}, /* 0x48 Chrontel */
+ {0xce, 0x3c, 39}, /* 0x49 */
+ {0x52, 0x4a, 36}, /* 0x4a Chrontel */
+ {0x34, 0x61, 95}, /* 0x4b */
+ {0x78, 0x27, 108}, /* 0x4c - was 102 */
+ {0x66, 0x43, 123}, /* 0x4d Modes 0x26-0x28 (1400x1050) */
+ {0x41, 0x4e, 21}, /* 0x4e */
+ {0xa1, 0x4a, 29}, /* 0x4f Chrontel */
+ {0x19, 0x42, 42}, /* 0x50 */
+ {0x54, 0x46, 58}, /* 0x51 Chrontel */
+ {0x25, 0x42, 61}, /* 0x52 */
+ {0x44, 0x44, 66}, /* 0x53 Chrontel */
+ {0x3a, 0x62, 70}, /* 0x54 Chrontel */
+ {0x62, 0xc6, 34}, /* 0x55 848x480-60 */
+ {0x6a, 0xc6, 37}, /* 0x56 848x480-75 - TEMP */
+ {0xbf, 0xc8, 35}, /* 0x57 856x480-38i,60 */
+ {0x30, 0x23, 88}, /* 0x58 1360x768-62 (is 60Hz!) */
+ {0x52, 0x07, 149}, /* 0x59 1280x960-85 */
+ {0x56, 0x07, 156}, /* 0x5a 1400x1050-75 */
+ {0x70, 0x29, 81}, /* 0x5b 1280x768 LCD */
+ {0x45, 0x25, 83}, /* 0x5c 1280x800 */
+ {0x70, 0x0a, 147}, /* 0x5d 1680x1050 */
+ {0x70, 0x24, 162}, /* 0x5e 1600x1200 */
+ {0x5a, 0x64, 65}, /* 0x5f 1280x720 - temp */
+ {0x63, 0x46, 68}, /* 0x60 1280x768_2 */
+ {0x31, 0x42, 79}, /* 0x61 1280x768_3 - temp */
+ {0, 0, 0}, /* 0x62 - custom (will be filled out at run-time) */
+ {0x5a, 0x64, 65}, /* 0x63 1280x720 (LCD LVDS) */
+ {0x70, 0x28, 90}, /* 0x64 1152x864@60 */
+ {0x41, 0xc4, 32}, /* 0x65 848x480@60 */
+ {0x5c, 0xc6, 32}, /* 0x66 856x480@60 */
+ {0x76, 0xe7, 27}, /* 0x67 720x480@60 */
+ {0x5f, 0xc6, 33}, /* 0x68 720/768x576@60 */
+ {0x52, 0x27, 75}, /* 0x69 1920x1080i 60Hz interlaced */
+ {0x7c, 0x6b, 38}, /* 0x6a 960x540@60 */
+ {0xe3, 0x56, 41}, /* 0x6b 960x600@60 */
+ {0x45, 0x25, 83}, /* 0x6c 1280x800 */
+ {0x70, 0x28, 90}, /* 0x6d 1152x864@60 */
+ {0x15, 0xe1, 20}, /* 0x6e 640x400@60 (fake, not actually used) */
+ {0x5f, 0xc6, 33}, /* 0x6f 720x576@60 */
+ {0x37, 0x5a, 10}, /* 0x70 320x200@60 (fake, not actually used) */
+ {0x2b, 0xc2, 35} /* 0x71 768@576@60 */
};
-int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
-int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
+int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
+int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
-extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
-extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data);
-extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
- u8 index, u8 data);
-extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
- u8 index, u8 *data);
-extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
- u8 idx, u8 myand, u8 myor);
-extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
- u8 index, u8 myor);
-extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
- u8 idx, u8 myand);
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 * data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+ u8 index, u8 data);
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+ u8 index, u8 * data);
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
+ u8 idx, u8 myand, u8 myor);
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+ u8 index, u8 myor);
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+ u8 idx, u8 myand);
void sisusb_delete(struct kref *kref);
int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data);
-int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data);
+int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 * data);
int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
- u32 dest, int length, size_t *bytes_written);
+ u32 dest, int length, size_t * bytes_written);
int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init);
int sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
- u8 *arg, int cmapsz, int ch512, int dorecalc,
+ u8 * arg, int cmapsz, int ch512, int dorecalc,
struct vc_data *c, int fh, int uplock);
void sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location);
int sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last);
@@ -839,4 +839,3 @@ void sisusb_console_exit(struct sisusb_usb_data *sisusb);
void sisusb_init_concode(void);
#endif
-
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
index f325ecb29a61..1c4240e802c1 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_struct.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -44,7 +44,7 @@
* * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
*
*/
@@ -52,85 +52,78 @@
#define _SISUSB_STRUCT_H_
struct SiS_St {
- unsigned char St_ModeID;
- unsigned short St_ModeFlag;
- unsigned char St_StTableIndex;
- unsigned char St_CRT2CRTC;
- unsigned char St_ResInfo;
- unsigned char VB_StTVFlickerIndex;
- unsigned char VB_StTVEdgeIndex;
- unsigned char VB_StTVYFilterIndex;
- unsigned char St_PDC;
+ unsigned char St_ModeID;
+ unsigned short St_ModeFlag;
+ unsigned char St_StTableIndex;
+ unsigned char St_CRT2CRTC;
+ unsigned char St_ResInfo;
+ unsigned char VB_StTVFlickerIndex;
+ unsigned char VB_StTVEdgeIndex;
+ unsigned char VB_StTVYFilterIndex;
+ unsigned char St_PDC;
};
-struct SiS_StandTable
-{
- unsigned char CRT_COLS;
- unsigned char ROWS;
- unsigned char CHAR_HEIGHT;
- unsigned short CRT_LEN;
- unsigned char SR[4];
- unsigned char MISC;
- unsigned char CRTC[0x19];
- unsigned char ATTR[0x14];
- unsigned char GRC[9];
+struct SiS_StandTable {
+ unsigned char CRT_COLS;
+ unsigned char ROWS;
+ unsigned char CHAR_HEIGHT;
+ unsigned short CRT_LEN;
+ unsigned char SR[4];
+ unsigned char MISC;
+ unsigned char CRTC[0x19];
+ unsigned char ATTR[0x14];
+ unsigned char GRC[9];
};
struct SiS_StResInfo_S {
- unsigned short HTotal;
- unsigned short VTotal;
+ unsigned short HTotal;
+ unsigned short VTotal;
};
-struct SiS_Ext
-{
- unsigned char Ext_ModeID;
- unsigned short Ext_ModeFlag;
- unsigned short Ext_VESAID;
- unsigned char Ext_RESINFO;
- unsigned char VB_ExtTVFlickerIndex;
- unsigned char VB_ExtTVEdgeIndex;
- unsigned char VB_ExtTVYFilterIndex;
- unsigned char VB_ExtTVYFilterIndexROM661;
- unsigned char REFindex;
- char ROMMODEIDX661;
+struct SiS_Ext {
+ unsigned char Ext_ModeID;
+ unsigned short Ext_ModeFlag;
+ unsigned short Ext_VESAID;
+ unsigned char Ext_RESINFO;
+ unsigned char VB_ExtTVFlickerIndex;
+ unsigned char VB_ExtTVEdgeIndex;
+ unsigned char VB_ExtTVYFilterIndex;
+ unsigned char VB_ExtTVYFilterIndexROM661;
+ unsigned char REFindex;
+ char ROMMODEIDX661;
};
-struct SiS_Ext2
-{
- unsigned short Ext_InfoFlag;
- unsigned char Ext_CRT1CRTC;
- unsigned char Ext_CRTVCLK;
- unsigned char Ext_CRT2CRTC;
- unsigned char Ext_CRT2CRTC_NS;
- unsigned char ModeID;
- unsigned short XRes;
- unsigned short YRes;
- unsigned char Ext_PDC;
- unsigned char Ext_FakeCRT2CRTC;
- unsigned char Ext_FakeCRT2Clk;
+struct SiS_Ext2 {
+ unsigned short Ext_InfoFlag;
+ unsigned char Ext_CRT1CRTC;
+ unsigned char Ext_CRTVCLK;
+ unsigned char Ext_CRT2CRTC;
+ unsigned char Ext_CRT2CRTC_NS;
+ unsigned char ModeID;
+ unsigned short XRes;
+ unsigned short YRes;
+ unsigned char Ext_PDC;
+ unsigned char Ext_FakeCRT2CRTC;
+ unsigned char Ext_FakeCRT2Clk;
};
-struct SiS_CRT1Table
-{
- unsigned char CR[17];
+struct SiS_CRT1Table {
+ unsigned char CR[17];
};
-struct SiS_VCLKData
-{
- unsigned char SR2B,SR2C;
- unsigned short CLOCK;
+struct SiS_VCLKData {
+ unsigned char SR2B, SR2C;
+ unsigned short CLOCK;
};
-struct SiS_ModeResInfo
-{
- unsigned short HTotal;
- unsigned short VTotal;
- unsigned char XChar;
- unsigned char YChar;
+struct SiS_ModeResInfo {
+ unsigned short HTotal;
+ unsigned short VTotal;
+ unsigned char XChar;
+ unsigned char YChar;
};
-struct SiS_Private
-{
+struct SiS_Private {
void *sisusb;
unsigned long IOAddress;
@@ -151,19 +144,18 @@ struct SiS_Private
unsigned long SiS_P3da;
unsigned long SiS_Part1Port;
- unsigned char SiS_MyCR63;
- unsigned short SiS_CRT1Mode;
- unsigned short SiS_ModeType;
- unsigned short SiS_SetFlag;
-
- const struct SiS_StandTable *SiS_StandTable;
- const struct SiS_St *SiS_SModeIDTable;
- const struct SiS_Ext *SiS_EModeIDTable;
- const struct SiS_Ext2 *SiS_RefIndex;
- const struct SiS_CRT1Table *SiS_CRT1Table;
- const struct SiS_VCLKData *SiS_VCLKData;
- const struct SiS_ModeResInfo *SiS_ModeResInfo;
+ unsigned char SiS_MyCR63;
+ unsigned short SiS_CRT1Mode;
+ unsigned short SiS_ModeType;
+ unsigned short SiS_SetFlag;
+
+ const struct SiS_StandTable *SiS_StandTable;
+ const struct SiS_St *SiS_SModeIDTable;
+ const struct SiS_Ext *SiS_EModeIDTable;
+ const struct SiS_Ext2 *SiS_RefIndex;
+ const struct SiS_CRT1Table *SiS_CRT1Table;
+ const struct SiS_VCLKData *SiS_VCLKData;
+ const struct SiS_ModeResInfo *SiS_ModeResInfo;
};
#endif
-
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index c03dfd7a9d36..f06e4e2b49d3 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -172,6 +172,10 @@ static inline struct mon_bin_hdr *MON_OFF2HDR(const struct mon_reader_bin *rp,
#define MON_RING_EMPTY(rp) ((rp)->b_cnt == 0)
+static unsigned char xfer_to_pipe[4] = {
+ PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+};
+
static struct class *mon_bin_class;
static dev_t mon_bin_dev0;
static struct cdev mon_bin_cdev;
@@ -354,13 +358,9 @@ static inline char mon_bin_get_setup(unsigned char *setupb,
const struct urb *urb, char ev_type)
{
- if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+ if (!usb_endpoint_xfer_control(&urb->ep->desc) || ev_type != 'S')
return '-';
- if (urb->dev->bus->uses_dma &&
- (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
- return mon_dmapeek(setupb, urb->setup_dma, SETUP_LEN);
- }
if (urb->setup_packet == NULL)
return 'Z';
@@ -386,13 +386,15 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp,
}
static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
- char ev_type)
+ char ev_type, int status)
{
+ const struct usb_endpoint_descriptor *epd = &urb->ep->desc;
unsigned long flags;
struct timeval ts;
unsigned int urb_length;
unsigned int offset;
unsigned int length;
+ unsigned char dir;
struct mon_bin_hdr *ep;
char data_tag = 0;
@@ -410,16 +412,19 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
if (length >= rp->b_size/5)
length = rp->b_size/5;
- if (usb_pipein(urb->pipe)) {
+ if (usb_urb_dir_in(urb)) {
if (ev_type == 'S') {
length = 0;
data_tag = '<';
}
+ /* Cannot rely on endpoint number in case of control ep.0 */
+ dir = USB_DIR_IN;
} else {
if (ev_type == 'C') {
length = 0;
data_tag = '>';
}
+ dir = 0;
}
if (rp->mmap_active)
@@ -440,15 +445,14 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
*/
memset(ep, 0, PKT_SIZE);
ep->type = ev_type;
- ep->xfer_type = usb_pipetype(urb->pipe);
- /* We use the fact that usb_pipein() returns 0x80 */
- ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
- ep->devnum = usb_pipedevice(urb->pipe);
+ ep->xfer_type = xfer_to_pipe[usb_endpoint_type(epd)];
+ ep->epnum = dir | usb_endpoint_num(epd);
+ ep->devnum = urb->dev->devnum;
ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->ts_sec = ts.tv_sec;
ep->ts_usec = ts.tv_usec;
- ep->status = urb->status;
+ ep->status = status;
ep->len_urb = urb_length;
ep->len_cap = length;
@@ -471,13 +475,13 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
static void mon_bin_submit(void *data, struct urb *urb)
{
struct mon_reader_bin *rp = data;
- mon_bin_event(rp, urb, 'S');
+ mon_bin_event(rp, urb, 'S', -EINPROGRESS);
}
-static void mon_bin_complete(void *data, struct urb *urb)
+static void mon_bin_complete(void *data, struct urb *urb, int status)
{
struct mon_reader_bin *rp = data;
- mon_bin_event(rp, urb, 'C');
+ mon_bin_event(rp, urb, 'C', status);
}
static void mon_bin_error(void *data, struct urb *urb, int error)
@@ -500,10 +504,10 @@ static void mon_bin_error(void *data, struct urb *urb, int error)
memset(ep, 0, PKT_SIZE);
ep->type = 'E';
- ep->xfer_type = usb_pipetype(urb->pipe);
- /* We use the fact that usb_pipein() returns 0x80 */
- ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
- ep->devnum = usb_pipedevice(urb->pipe);
+ ep->xfer_type = xfer_to_pipe[usb_endpoint_type(&urb->ep->desc)];
+ ep->epnum = usb_urb_dir_in(urb) ? USB_DIR_IN : 0;
+ ep->epnum |= usb_endpoint_num(&urb->ep->desc);
+ ep->devnum = urb->dev->devnum;
ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->status = error;
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index ce61d8b0fd86..b371ffd39d36 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -129,7 +129,8 @@ static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error)
/*
*/
-static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb)
+static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb,
+ int status)
{
unsigned long flags;
struct list_head *pos;
@@ -139,28 +140,18 @@ static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb)
mbus->cnt_events++;
list_for_each (pos, &mbus->r_list) {
r = list_entry(pos, struct mon_reader, r_link);
- r->rnf_complete(r->r_data, urb);
+ r->rnf_complete(r->r_data, urb, status);
}
spin_unlock_irqrestore(&mbus->lock, flags);
}
-static void mon_complete(struct usb_bus *ubus, struct urb *urb)
+static void mon_complete(struct usb_bus *ubus, struct urb *urb, int status)
{
struct mon_bus *mbus;
- mbus = ubus->mon_bus;
- if (mbus == NULL) {
- /*
- * This should not happen.
- * At this point we do not even know the bus number...
- */
- printk(KERN_ERR TAG ": Null mon bus in URB, pipe 0x%x\n",
- urb->pipe);
- return;
- }
-
- mon_bus_complete(mbus, urb);
- mon_bus_complete(&mon_bus0, urb);
+ if ((mbus = ubus->mon_bus) != NULL)
+ mon_bus_complete(mbus, urb, status);
+ mon_bus_complete(&mon_bus0, urb, status);
}
/* int (*unlink_urb) (struct urb *urb, int status); */
@@ -170,7 +161,7 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb)
*/
static void mon_stop(struct mon_bus *mbus)
{
- struct usb_bus *ubus = mbus->u_bus;
+ struct usb_bus *ubus;
struct list_head *p;
if (mbus == &mon_bus0) {
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 8f27a9e1c36b..ebb04ac4857b 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -50,10 +50,13 @@ struct mon_iso_desc {
struct mon_event_text {
struct list_head e_link;
int type; /* submit, complete, etc. */
- unsigned int pipe; /* Pipe */
unsigned long id; /* From pointer, most of the time */
unsigned int tstamp;
int busnum;
+ char devnum;
+ char epnum;
+ char is_in;
+ char xfertype;
int length; /* Depends on type: xfer length or act length */
int status;
int interval;
@@ -121,13 +124,9 @@ static inline char mon_text_get_setup(struct mon_event_text *ep,
struct urb *urb, char ev_type, struct mon_bus *mbus)
{
- if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+ if (ep->xfertype != USB_ENDPOINT_XFER_CONTROL || ev_type != 'S')
return '-';
- if (urb->dev->bus->uses_dma &&
- (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
- return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX);
- }
if (urb->setup_packet == NULL)
return 'Z'; /* '0' would be not as pretty. */
@@ -138,14 +137,12 @@ static inline char mon_text_get_setup(struct mon_event_text *ep,
static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
int len, char ev_type, struct mon_bus *mbus)
{
- int pipe = urb->pipe;
-
if (len <= 0)
return 'L';
if (len >= DATA_MAX)
len = DATA_MAX;
- if (usb_pipein(pipe)) {
+ if (ep->is_in) {
if (ev_type != 'C')
return '<';
} else {
@@ -186,7 +183,7 @@ static inline unsigned int mon_get_timestamp(void)
}
static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
- char ev_type)
+ char ev_type, int status)
{
struct mon_event_text *ep;
unsigned int stamp;
@@ -203,24 +200,28 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
}
ep->type = ev_type;
- ep->pipe = urb->pipe;
ep->id = (unsigned long) urb;
ep->busnum = urb->dev->bus->busnum;
+ ep->devnum = urb->dev->devnum;
+ ep->epnum = usb_endpoint_num(&urb->ep->desc);
+ ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+ ep->is_in = usb_urb_dir_in(urb);
ep->tstamp = stamp;
ep->length = (ev_type == 'S') ?
urb->transfer_buffer_length : urb->actual_length;
/* Collecting status makes debugging sense for submits, too */
- ep->status = urb->status;
+ ep->status = status;
- if (usb_pipeint(urb->pipe)) {
+ if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
ep->interval = urb->interval;
- } else if (usb_pipeisoc(urb->pipe)) {
+ } else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
ep->interval = urb->interval;
ep->start_frame = urb->start_frame;
ep->error_count = urb->error_count;
}
ep->numdesc = urb->number_of_packets;
- if (usb_pipeisoc(urb->pipe) && urb->number_of_packets > 0) {
+ if (ep->xfertype == USB_ENDPOINT_XFER_ISOC &&
+ urb->number_of_packets > 0) {
if ((ndesc = urb->number_of_packets) > ISODESC_MAX)
ndesc = ISODESC_MAX;
fp = urb->iso_frame_desc;
@@ -247,13 +248,13 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
static void mon_text_submit(void *data, struct urb *urb)
{
struct mon_reader_text *rp = data;
- mon_text_event(rp, urb, 'S');
+ mon_text_event(rp, urb, 'S', -EINPROGRESS);
}
-static void mon_text_complete(void *data, struct urb *urb)
+static void mon_text_complete(void *data, struct urb *urb, int status)
{
struct mon_reader_text *rp = data;
- mon_text_event(rp, urb, 'C');
+ mon_text_event(rp, urb, 'C', status);
}
static void mon_text_error(void *data, struct urb *urb, int error)
@@ -268,9 +269,12 @@ static void mon_text_error(void *data, struct urb *urb, int error)
}
ep->type = 'E';
- ep->pipe = urb->pipe;
ep->id = (unsigned long) urb;
ep->busnum = 0;
+ ep->devnum = urb->dev->devnum;
+ ep->epnum = usb_endpoint_num(&urb->ep->desc);
+ ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+ ep->is_in = usb_urb_dir_in(urb);
ep->tstamp = 0;
ep->length = 0;
ep->status = error;
@@ -413,10 +417,10 @@ static ssize_t mon_text_read_u(struct file *file, char __user *buf,
mon_text_read_head_u(rp, &ptr, ep);
if (ep->type == 'E') {
mon_text_read_statset(rp, &ptr, ep);
- } else if (usb_pipeisoc(ep->pipe)) {
+ } else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
mon_text_read_isostat(rp, &ptr, ep);
mon_text_read_isodesc(rp, &ptr, ep);
- } else if (usb_pipeint(ep->pipe)) {
+ } else if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
mon_text_read_intstat(rp, &ptr, ep);
} else {
mon_text_read_statset(rp, &ptr, ep);
@@ -468,18 +472,17 @@ static void mon_text_read_head_t(struct mon_reader_text *rp,
{
char udir, utype;
- udir = usb_pipein(ep->pipe) ? 'i' : 'o';
- switch (usb_pipetype(ep->pipe)) {
- case PIPE_ISOCHRONOUS: utype = 'Z'; break;
- case PIPE_INTERRUPT: utype = 'I'; break;
- case PIPE_CONTROL: utype = 'C'; break;
+ udir = (ep->is_in ? 'i' : 'o');
+ switch (ep->xfertype) {
+ case USB_ENDPOINT_XFER_ISOC: utype = 'Z'; break;
+ case USB_ENDPOINT_XFER_INT: utype = 'I'; break;
+ case USB_ENDPOINT_XFER_CONTROL: utype = 'C'; break;
default: /* PIPE_BULK */ utype = 'B';
}
p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
"%lx %u %c %c%c:%03u:%02u",
ep->id, ep->tstamp, ep->type,
- utype, udir,
- usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+ utype, udir, ep->devnum, ep->epnum);
}
static void mon_text_read_head_u(struct mon_reader_text *rp,
@@ -487,18 +490,17 @@ static void mon_text_read_head_u(struct mon_reader_text *rp,
{
char udir, utype;
- udir = usb_pipein(ep->pipe) ? 'i' : 'o';
- switch (usb_pipetype(ep->pipe)) {
- case PIPE_ISOCHRONOUS: utype = 'Z'; break;
- case PIPE_INTERRUPT: utype = 'I'; break;
- case PIPE_CONTROL: utype = 'C'; break;
+ udir = (ep->is_in ? 'i' : 'o');
+ switch (ep->xfertype) {
+ case USB_ENDPOINT_XFER_ISOC: utype = 'Z'; break;
+ case USB_ENDPOINT_XFER_INT: utype = 'I'; break;
+ case USB_ENDPOINT_XFER_CONTROL: utype = 'C'; break;
default: /* PIPE_BULK */ utype = 'B';
}
p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
"%lx %u %c %c%c:%d:%03u:%u",
ep->id, ep->tstamp, ep->type,
- utype, udir,
- ep->busnum, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+ utype, udir, ep->busnum, ep->devnum, ep->epnum);
}
static void mon_text_read_statset(struct mon_reader_text *rp,
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
index f68ad6d99ad7..f5d84ff8c101 100644
--- a/drivers/usb/mon/usb_mon.h
+++ b/drivers/usb/mon/usb_mon.h
@@ -46,7 +46,7 @@ struct mon_reader {
void (*rnf_submit)(void *data, struct urb *urb);
void (*rnf_error)(void *data, struct urb *urb, int error);
- void (*rnf_complete)(void *data, struct urb *urb);
+ void (*rnf_complete)(void *data, struct urb *urb, int status);
};
void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r);
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 43d6db696f90..99fefed77919 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -92,6 +92,16 @@ config USB_SERIAL_BELKIN
To compile this driver as a module, choose M here: the
module will be called belkin_sa.
+config USB_SERIAL_CH341
+ tristate "USB Winchiphead CH341 Single Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Winchiphead CH341 single port
+ USB to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ch341.
+
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 07a976eca6b7..d6fb384e52b2 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
+obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index c9fd486c1c7d..2a8e537cb046 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -172,11 +172,6 @@ static void ark3116_set_termios(struct usb_serial_port *port,
dbg("%s - port %d", __FUNCTION__, port->number);
- if (!port->tty || !port->tty->termios) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(port->tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index a47a24f8820d..0b14aea8ebd5 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -36,6 +36,16 @@ static int usb_serial_device_match (struct device *dev, struct device_driver *dr
return 0;
}
+static ssize_t show_port_number(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_serial_port *port = to_usb_serial_port(dev);
+
+ return sprintf(buf, "%d\n", port->number - port->serial->minor);
+}
+
+static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL);
+
static int usb_serial_device_probe (struct device *dev)
{
struct usb_serial_driver *driver;
@@ -62,6 +72,10 @@ static int usb_serial_device_probe (struct device *dev)
goto exit;
}
+ retval = device_create_file(dev, &dev_attr_port_number);
+ if (retval)
+ goto exit;
+
minor = port->number;
tty_register_device (usb_serial_tty_driver, minor, dev);
dev_info(&port->serial->dev->dev,
@@ -84,6 +98,8 @@ static int usb_serial_device_remove (struct device *dev)
return -ENODEV;
}
+ device_remove_file(&port->dev, &dev_attr_port_number);
+
driver = port->serial->type;
if (driver->port_remove) {
if (!try_module_get(driver->driver.owner)) {
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
new file mode 100644
index 000000000000..6b252ceb39a8
--- /dev/null
+++ b/drivers/usb/serial/ch341.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ *
+ * ch341.c implements a serial port driver for the Winchiphead CH341.
+ *
+ * The CH341 device can be used to implement an RS232 asynchronous
+ * serial port, an IEEE-1284 parallel printer port or a memory-like
+ * interface. In all cases the CH341 supports an I2C interface as well.
+ * This driver only supports the asynchronous serial interface.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+
+#define DEFAULT_BAUD_RATE 2400
+#define DEFAULT_TIMEOUT 1000
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x4348, 0x5523) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ch341_private {
+ unsigned baud_rate;
+ u8 dtr;
+ u8 rts;
+};
+
+static int ch341_control_out(struct usb_device *dev, u8 request,
+ u16 value, u16 index)
+{
+ int r;
+ dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
+ (int)request, (int)value, (int)index);
+
+ r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ value, index, NULL, 0, DEFAULT_TIMEOUT);
+
+ return r;
+}
+
+static int ch341_control_in(struct usb_device *dev,
+ u8 request, u16 value, u16 index,
+ char *buf, unsigned bufsize)
+{
+ int r;
+ dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
+ (int)request, (int)value, (int)index, buf, (int)bufsize);
+
+ r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ value, index, buf, bufsize, DEFAULT_TIMEOUT);
+ return r;
+}
+
+static int ch341_set_baudrate(struct usb_device *dev,
+ struct ch341_private *priv)
+{
+ short a, b;
+ int r;
+
+ dbg("ch341_set_baudrate(%d)", priv->baud_rate);
+ switch (priv->baud_rate) {
+ case 2400:
+ a = 0xd901;
+ b = 0x0038;
+ break;
+ case 4800:
+ a = 0x6402;
+ b = 0x001f;
+ break;
+ case 9600:
+ a = 0xb202;
+ b = 0x0013;
+ break;
+ case 19200:
+ a = 0xd902;
+ b = 0x000d;
+ break;
+ case 38400:
+ a = 0x6403;
+ b = 0x000a;
+ break;
+ case 115200:
+ a = 0xcc03;
+ b = 0x0008;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ r = ch341_control_out(dev, 0x9a, 0x1312, a);
+ if (!r)
+ r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
+
+ return r;
+}
+
+static int ch341_set_handshake(struct usb_device *dev,
+ struct ch341_private *priv)
+{
+ dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
+ return ch341_control_out(dev, 0xa4,
+ ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
+}
+
+static int ch341_get_status(struct usb_device *dev)
+{
+ char *buffer;
+ int r;
+ const unsigned size = 8;
+
+ dbg("ch341_get_status()");
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
+ if ( r < 0)
+ goto out;
+
+ /* Not having the datasheet for the CH341, we ignore the bytes returned
+ * from the device. Return error if the device did not respond in time.
+ */
+ r = 0;
+
+out: kfree(buffer);
+ return r;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
+{
+ char *buffer;
+ int r;
+ const unsigned size = 8;
+
+ dbg("ch341_configure()");
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ /* expect two bytes 0x27 0x00 */
+ r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0xa1, 0, 0);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_baudrate(dev, priv);
+ if (r < 0)
+ goto out;
+
+ /* expect two bytes 0x56 0x00 */
+ r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
+ if (r < 0)
+ goto out;
+
+ /* expect 0xff 0xee */
+ r = ch341_get_status(dev);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_baudrate(dev, priv);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_handshake(dev, priv);
+ if (r < 0)
+ goto out;
+
+ /* expect 0x9f 0xee */
+ r = ch341_get_status(dev);
+
+out: kfree(buffer);
+ return r;
+}
+
+/* allocate private data */
+static int ch341_attach(struct usb_serial *serial)
+{
+ struct ch341_private *priv;
+ int r;
+
+ dbg("ch341_attach()");
+
+ /* private data */
+ priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+ priv->dtr = 1;
+ priv->rts = 1;
+
+ r = ch341_configure(serial->dev, priv);
+ if (r < 0)
+ goto error;
+
+ usb_set_serial_port_data(serial->port[0], priv);
+ return 0;
+
+error: kfree(priv);
+ return r;
+}
+
+/* open this device, set default parameters */
+static int ch341_open(struct usb_serial_port *port, struct file *filp)
+{
+ struct usb_serial *serial = port->serial;
+ struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+ int r;
+
+ dbg("ch341_open()");
+
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+ priv->dtr = 1;
+ priv->rts = 1;
+
+ r = ch341_configure(serial->dev, priv);
+ if (r)
+ goto out;
+
+ r = ch341_set_handshake(serial->dev, priv);
+ if (r)
+ goto out;
+
+ r = ch341_set_baudrate(serial->dev, priv);
+ if (r)
+ goto out;
+
+ r = usb_serial_generic_open(port, filp);
+
+out: return r;
+}
+
+/* Old_termios contains the original termios settings and
+ * tty->termios contains the new setting to be used.
+ */
+static void ch341_set_termios(struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty = port->tty;
+ unsigned baud_rate;
+
+ dbg("ch341_set_termios()");
+
+ if (!tty || !tty->termios)
+ return;
+
+ baud_rate = tty_get_baud_rate(tty);
+
+ switch (baud_rate) {
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 115200:
+ priv->baud_rate = baud_rate;
+ break;
+ default:
+ dbg("Rate %d not supported, using %d",
+ baud_rate, DEFAULT_BAUD_RATE);
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+ }
+
+ ch341_set_baudrate(port->serial->dev, priv);
+
+ /* Unimplemented:
+ * (cflag & CSIZE) : data bits [5, 8]
+ * (cflag & PARENB) : parity {NONE, EVEN, ODD}
+ * (cflag & CSTOPB) : stop bits [1, 2]
+ */
+}
+
+static struct usb_driver ch341_driver = {
+ .name = "ch341",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver ch341_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ch341-uart",
+ },
+ .id_table = id_table,
+ .usb_driver = &ch341_driver,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .open = ch341_open,
+ .set_termios = ch341_set_termios,
+ .attach = ch341_attach,
+};
+
+static int __init ch341_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&ch341_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&ch341_driver);
+ if (retval)
+ usb_serial_deregister(&ch341_device);
+ return retval;
+}
+
+static void __exit ch341_exit(void)
+{
+ usb_deregister(&ch341_driver);
+ usb_serial_deregister(&ch341_device);
+}
+
+module_init(ch341_init);
+module_exit(ch341_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+/* EOF ch341.c */
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 33f6ee50b8d3..eb7df1835c11 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -53,6 +53,7 @@ static void cp2101_shutdown(struct usb_serial*);
static int debug;
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
@@ -521,7 +522,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
dbg("%s - port %d", __FUNCTION__, port->number);
- if ((!port->tty) || (!port->tty->termios)) {
+ if (!port->tty || !port->tty->termios) {
dbg("%s - no tty structures", __FUNCTION__);
return;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 2d045857b181..e4c248c98e84 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1169,7 +1169,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
device_remove_file(&port->dev, &dev_attr_event_char);
- if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
+ if (priv->chip_type == FT232BM ||
+ priv->chip_type == FT2232C ||
+ priv->chip_type == FT232RL) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -2102,6 +2104,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
case FT8U232AM:
case FT232BM:
case FT2232C:
+ case FT232RL:
/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
format as the data returned from the in point */
if ((ret = usb_control_msg(port->serial->dev,
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 4092f6dc9efd..b5194dc7d3bb 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -24,26 +24,6 @@ static struct usb_device_id id_table [] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
-static int funsoft_ioctl(struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct ktermios t;
-
- dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd);
-
- if (cmd == TCSETSF) {
- if (user_termios_to_kernel_termios(&t, (struct termios __user *)arg))
- return -EFAULT;
-
- dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__,
- t.c_iflag, t.c_oflag, t.c_cflag, t.c_lflag);
-
- if (!(t.c_lflag & ICANON))
- return -EINVAL;
- }
- return -ENOIOCTLCMD;
-}
-
static struct usb_driver funsoft_driver = {
.name = "funsoft",
.probe = usb_serial_probe,
@@ -63,7 +43,6 @@ static struct usb_serial_driver funsoft_device = {
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
- .ioctl = funsoft_ioctl,
};
static int __init funsoft_init(void)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 6a3a704b5849..e836ad07fdb9 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -256,6 +256,7 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
{ USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
{ USB_DEVICE(0x04DD, 0x9151) }, /* SHARP S01SH USB Modem */
+ { USB_DEVICE(0x04DD, 0x91AC) }, /* SHARP WS011SH USB Modem */
{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
@@ -646,11 +647,13 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
kfree(port->bulk_out_buffer);
port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
if (port->bulk_in_buffer == NULL) {
+ port->bulk_out_buffer = NULL; /* prevent double free */
goto enomem;
}
port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
if (port->bulk_out_buffer == NULL) {
kfree(port->bulk_in_buffer);
+ port->bulk_in_buffer = NULL;
goto enomem;
}
port->read_urb->transfer_buffer = port->bulk_in_buffer;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 5a4127e62c4a..90e3216abd1f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -728,24 +728,32 @@ static void klsi_105_set_termios (struct usb_serial_port *port,
#endif
}
- switch(cflag & CBAUD) {
- case B0: /* handled below */
+ switch(tty_get_baud_rate(port->tty)) {
+ case 0: /* handled below */
break;
- case B1200: priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+ case 1200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b1200;
break;
- case B2400: priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+ case 2400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b2400;
break;
- case B4800: priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+ case 4800:
+ priv->cfg.baudrate = kl5kusb105a_sio_b4800;
break;
- case B9600: priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ case 9600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
break;
- case B19200: priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+ case 19200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b19200;
break;
- case B38400: priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+ case 38400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b38400;
break;
- case B57600: priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+ case 57600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b57600;
break;
- case B115200: priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+ case 115200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b115200;
break;
default:
err("KLSI USB->Serial converter:"
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 02a86dbc0e97..6f224195bd25 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -82,6 +82,7 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static void kobil_read_int_callback( struct urb *urb );
static void kobil_write_callback( struct urb *purb );
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old);
static struct usb_device_id id_table [] = {
@@ -119,6 +120,7 @@ static struct usb_serial_driver kobil_device = {
.attach = kobil_startup,
.shutdown = kobil_shutdown,
.ioctl = kobil_ioctl,
+ .set_termios = kobil_set_termios,
.tiocmget = kobil_tiocmget,
.tiocmset = kobil_tiocmset,
.open = kobil_open,
@@ -137,7 +139,6 @@ struct kobil_private {
int cur_pos; // index of the next char to send in buf
__u16 device_type;
int line_state;
- struct ktermios internal_termios;
};
@@ -216,7 +217,7 @@ static void kobil_shutdown (struct usb_serial *serial)
static int kobil_open (struct usb_serial_port *port, struct file *filp)
{
- int i, result = 0;
+ int result = 0;
struct kobil_private *priv;
unsigned char *transfer_buffer;
int transfer_buffer_length = 8;
@@ -242,16 +243,6 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp)
port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
- // set up internal termios structure
- priv->internal_termios.c_iflag = port->tty->termios->c_iflag;
- priv->internal_termios.c_oflag = port->tty->termios->c_oflag;
- priv->internal_termios.c_cflag = port->tty->termios->c_cflag;
- priv->internal_termios.c_lflag = port->tty->termios->c_lflag;
-
- for (i=0; i<NCCS; i++) {
- priv->internal_termios.c_cc[i] = port->tty->termios->c_cc[i];
- }
-
// allocate memory for transfer buffer
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (! transfer_buffer) {
@@ -607,102 +598,79 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file,
return (result < 0) ? result : 0;
}
-
-static int kobil_ioctl(struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old)
{
struct kobil_private * priv;
int result;
unsigned short urb_val = 0;
- unsigned char *transfer_buffer;
- int transfer_buffer_length = 8;
- char *settings;
- void __user *user_arg = (void __user *)arg;
+ int c_cflag = port->tty->termios->c_cflag;
+ speed_t speed;
+ void * settings;
priv = usb_get_serial_port_data(port);
- if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
+ if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
// This device doesn't support ioctl calls
- return 0;
- }
-
- switch (cmd) {
- case TCGETS: // 0x5401
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct ktermios))) {
- dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
- return -EFAULT;
- }
- if (kernel_termios_to_user_termios((struct ktermios __user *)arg,
- &priv->internal_termios))
- return -EFAULT;
- return 0;
-
- case TCSETS: // 0x5402
- if (!(port->tty->termios)) {
- dbg("%s - port %d Error: port->tty->termios is NULL", __FUNCTION__, port->number);
- return -ENOTTY;
- }
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct ktermios))) {
- dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
- return -EFAULT;
- }
- if (user_termios_to_kernel_termios(&priv->internal_termios,
- (struct ktermios __user *)arg))
- return -EFAULT;
-
- settings = kzalloc(50, GFP_KERNEL);
- if (! settings) {
- return -ENOBUFS;
- }
+ return;
- switch (priv->internal_termios.c_cflag & CBAUD) {
- case B1200:
+ switch (speed = tty_get_baud_rate(port->tty)) {
+ case 1200:
urb_val = SUSBCR_SBR_1200;
- strcat(settings, "1200 ");
break;
- case B9600:
+ case 9600:
default:
urb_val = SUSBCR_SBR_9600;
- strcat(settings, "9600 ");
break;
- }
+ }
+ urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
+
+ settings = kzalloc(50, GFP_KERNEL);
+ if (! settings)
+ return;
- urb_val |= (priv->internal_termios.c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
- strcat(settings, (priv->internal_termios.c_cflag & CSTOPB) ? "2 StopBits " : "1 StopBit ");
+ sprintf(settings, "%d ", speed);
- if (priv->internal_termios.c_cflag & PARENB) {
- if (priv->internal_termios.c_cflag & PARODD) {
- urb_val |= SUSBCR_SPASB_OddParity;
- strcat(settings, "Odd Parity");
- } else {
- urb_val |= SUSBCR_SPASB_EvenParity;
- strcat(settings, "Even Parity");
- }
+ if (c_cflag & PARENB) {
+ if (c_cflag & PARODD) {
+ urb_val |= SUSBCR_SPASB_OddParity;
+ strcat(settings, "Odd Parity");
} else {
- urb_val |= SUSBCR_SPASB_NoParity;
- strcat(settings, "No Parity");
+ urb_val |= SUSBCR_SPASB_EvenParity;
+ strcat(settings, "Even Parity");
}
- dbg("%s - port %d setting port to: %s", __FUNCTION__, port->number, settings );
+ } else {
+ urb_val |= SUSBCR_SPASB_NoParity;
+ strcat(settings, "No Parity");
+ }
- result = usb_control_msg( port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0 ),
- SUSBCRequest_SetBaudRateParityAndStopBits,
- USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
- urb_val,
- 0,
- settings,
- 0,
- KOBIL_TIMEOUT
- );
+ result = usb_control_msg( port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0 ),
+ SUSBCRequest_SetBaudRateParityAndStopBits,
+ USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ urb_val,
+ 0,
+ settings,
+ 0,
+ KOBIL_TIMEOUT
+ );
+ kfree(settings);
+}
- dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result);
- kfree(settings);
+static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+{
+ struct kobil_private * priv = usb_get_serial_port_data(port);
+ unsigned char *transfer_buffer;
+ int transfer_buffer_length = 8;
+ int result;
+
+ if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+ // This device doesn't support ioctl calls
return 0;
+ switch (cmd) {
case TCFLSH: // 0x540B
transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
- if (! transfer_buffer) {
+ if (! transfer_buffer)
return -ENOBUFS;
- }
result = usb_control_msg( port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0 ),
@@ -716,15 +684,13 @@ static int kobil_ioctl(struct usb_serial_port *port, struct file *file,
);
dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __FUNCTION__, port->number, result);
-
kfree(transfer_buffer);
- return ((result < 0) ? -EFAULT : 0);
-
+ return (result < 0) ? -EFAULT : 0;
+ default:
+ return -ENOIOCTLCMD;
}
- return -ENOIOCTLCMD;
}
-
static int __init kobil_init (void)
{
int retval;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index e08c9bb403d8..0dc99f75bb09 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -206,20 +206,20 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
}
} else {
switch (value) {
- case 300: break;
- case 600: break;
- case 1200: break;
- case 2400: break;
- case 4800: break;
- case 9600: break;
- case 19200: break;
- case 38400: break;
- case 57600: break;
- case 115200: break;
- default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
- value = 9600;
+ case 300: break;
+ case 600: break;
+ case 1200: break;
+ case 2400: break;
+ case 4800: break;
+ case 9600: break;
+ case 19200: break;
+ case 38400: break;
+ case 57600: break;
+ case 115200: break;
+ default:
+ err("MCT USB-RS232: unsupported baudrate request 0x%x,"
+ " using default of B9600", value);
+ value = 9600;
}
return 115200/value;
}
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 64f3f66a7a35..d19861166b50 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -1144,7 +1144,7 @@ static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
if (size == 0)
return NULL;
- pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+ pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
if (pb == NULL)
return NULL;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index f9f85f56f0db..1da57fd9ea23 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -73,6 +73,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index f9a71d0c102e..c39bace5cbcc 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -59,6 +59,7 @@
#define SIEMENS_PRODUCT_ID_SX1 0x0001
#define SIEMENS_PRODUCT_ID_X65 0x0003
#define SIEMENS_PRODUCT_ID_X75 0x0004
+#define SIEMENS_PRODUCT_ID_EF81 0x0005
#define SYNTECH_VENDOR_ID 0x0745
#define SYNTECH_PRODUCT_ID 0x0001
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 51669b7622bb..4e6dcc199be9 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -90,18 +90,12 @@ MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION (DRIVER_DESC);
MODULE_LICENSE("GPL");
-#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT)
-#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
-#endif
-
-#if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR)
static __u16 vendor; // no default
static __u16 product; // no default
module_param(vendor, ushort, 0);
MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)");
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified USB idProduct (required)");
-#endif
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
@@ -145,11 +139,6 @@ static struct usb_device_id id_table[] = {
{MY_USB_DEVICE (0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie
{MY_USB_DEVICE (0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie
{MY_USB_DEVICE (0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Sharp tmp
-#if defined(CONFIG_USB_SAFE_SERIAL_VENDOR)
- {MY_USB_DEVICE
- (CONFIG_USB_SAFE_SERIAL_VENDOR, CONFIG_USB_SAFE_SERIAL_PRODUCT, CDC_DEVICE_CLASS,
- LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
-#endif
// extra null entry for module
// vendor/produc parameters
{MY_USB_DEVICE (0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 9bf01a5efc84..4b1bd7def4a5 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -578,6 +578,17 @@ static void kill_traffic(struct usb_serial_port *port)
{
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
+ /*
+ * This is tricky.
+ * Some drivers submit the read_urb in the
+ * handler for the write_urb or vice versa
+ * this order determines the order in which
+ * usb_kill_urb() must be used to reliably
+ * kill the URBs. As it is unknown here,
+ * both orders must be used in turn.
+ * The call below is not redundant.
+ */
+ usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_out_urb);
}
@@ -651,16 +662,14 @@ exit:
static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
{
- struct list_head *p;
const struct usb_device_id *id;
- struct usb_serial_driver *t;
+ struct usb_serial_driver *drv;
/* Check if the usb id matches a known device */
- list_for_each(p, &usb_serial_driver_list) {
- t = list_entry(p, struct usb_serial_driver, driver_list);
- id = get_iface_id(t, iface);
+ list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
+ id = get_iface_id(drv, iface);
if (id)
- return t;
+ return drv;
}
return NULL;
@@ -800,9 +809,6 @@ int usb_serial_probe(struct usb_interface *interface,
/* END HORRIBLE HACK FOR PL2303 */
#endif
- /* found all that we need */
- dev_info(&interface->dev, "%s converter detected\n", type->description);
-
#ifdef CONFIG_USB_SERIAL_GENERIC
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
@@ -836,6 +842,24 @@ int usb_serial_probe(struct usb_interface *interface,
serial->num_interrupt_in = num_interrupt_in;
serial->num_interrupt_out = num_interrupt_out;
+ /* check that the device meets the driver's requirements */
+ if ((type->num_interrupt_in != NUM_DONT_CARE &&
+ type->num_interrupt_in != num_interrupt_in)
+ || (type->num_interrupt_out != NUM_DONT_CARE &&
+ type->num_interrupt_out != num_interrupt_out)
+ || (type->num_bulk_in != NUM_DONT_CARE &&
+ type->num_bulk_in != num_bulk_in)
+ || (type->num_bulk_out != NUM_DONT_CARE &&
+ type->num_bulk_out != num_bulk_out)) {
+ dbg("wrong number of endpoints");
+ kfree(serial);
+ return -EIO;
+ }
+
+ /* found all that we need */
+ dev_info(&interface->dev, "%s converter detected\n",
+ type->description);
+
/* create our ports, we need as many as the max endpoints */
/* we don't use num_ports here cauz some devices have more endpoint pairs than ports */
max_endpoints = max(num_bulk_in, num_bulk_out);
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 30e08c0bcdc2..7ee087fed913 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -46,7 +46,6 @@ static int visor_probe (struct usb_serial *serial, const struct usb_device_id
static int visor_calc_num_ports(struct usb_serial *serial);
static void visor_shutdown (struct usb_serial *serial);
static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void visor_write_bulk_callback (struct urb *urb);
static void visor_read_bulk_callback (struct urb *urb);
static void visor_read_int_callback (struct urb *urb);
@@ -203,7 +202,6 @@ static struct usb_serial_driver handspring_device = {
.calc_num_ports = visor_calc_num_ports,
.shutdown = visor_shutdown,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -234,7 +232,6 @@ static struct usb_serial_driver clie_5_device = {
.calc_num_ports = visor_calc_num_ports,
.shutdown = visor_shutdown,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -262,7 +259,6 @@ static struct usb_serial_driver clie_3_5_device = {
.unthrottle = visor_unthrottle,
.attach = clie_3_5_startup,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -936,66 +932,6 @@ static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsign
return -ENOIOCTLCMD;
}
-
-/* This function is all nice and good, but we don't change anything based on it :) */
-static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
-{
- unsigned int cflag;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
- cflag = port->tty->termios->c_cflag;
-
- /* get the byte size */
- switch (cflag & CSIZE) {
- case CS5: dbg("%s - data bits = 5", __FUNCTION__); break;
- case CS6: dbg("%s - data bits = 6", __FUNCTION__); break;
- case CS7: dbg("%s - data bits = 7", __FUNCTION__); break;
- default:
- case CS8: dbg("%s - data bits = 8", __FUNCTION__); break;
- }
-
- /* determine the parity */
- if (cflag & PARENB)
- if (cflag & PARODD)
- dbg("%s - parity = odd", __FUNCTION__);
- else
- dbg("%s - parity = even", __FUNCTION__);
- else
- dbg("%s - parity = none", __FUNCTION__);
-
- /* figure out the stop bits requested */
- if (cflag & CSTOPB)
- dbg("%s - stop bits = 2", __FUNCTION__);
- else
- dbg("%s - stop bits = 1", __FUNCTION__);
-
-
- /* figure out the flow control settings */
- if (cflag & CRTSCTS)
- dbg("%s - RTS/CTS is enabled", __FUNCTION__);
- else
- dbg("%s - RTS/CTS is disabled", __FUNCTION__);
-
- /* determine software flow control */
- if (I_IXOFF(port->tty))
- dbg("%s - XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, START_CHAR(port->tty), STOP_CHAR(port->tty));
- else
- dbg("%s - XON/XOFF is disabled", __FUNCTION__);
-
- /* get the baud rate wanted */
- dbg("%s - baud rate = %d", __FUNCTION__, tty_get_baud_rate(port->tty));
-
- return;
-}
-
-
static int __init visor_init (void)
{
int i, retval;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 3a41740cad97..ee5b42aa5363 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -90,3 +90,17 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
return (res ? -1 : 0);
}
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
+{
+ int result;
+
+ us->iobuf[0] = 0x1;
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ USB_REQ_SET_FEATURE,
+ USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ 0x01, 0x0, us->iobuf, 0x1, 1000);
+ US_DEBUGP("usb_control_msg performing result is %d\n", result);
+ return (result ? 0 : -1);
+}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index e2967a4d48a2..ad3ffd4236c2 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -47,3 +47,6 @@ int usb_stor_euscsi_init(struct us_data *us);
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 5e27297c0175..17ca4d73577b 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -190,9 +190,6 @@ static int usbat_check_status(struct us_data *us)
unsigned char *reply = us->iobuf;
int rc;
- if (!us)
- return USB_STOR_TRANSPORT_ERROR;
-
rc = usbat_get_status(us, reply);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c6b78ba815ea..9b656ec427d0 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -198,7 +198,7 @@ UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Bardur Arantsson <bardur@scientician.net> */
-UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0370,
+UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610,
"Nokia",
"6131",
US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -341,6 +341,13 @@ UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
+UNUSUAL_DEV( 0x04b0, 0x040f, 0x0200, 0x0200,
+ "NIKON",
+ "NIKON DSC D200",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Reported by Emil Larsson <emil@swip.net> */
UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101,
"NIKON",
@@ -355,6 +362,20 @@ UNUSUAL_DEV( 0x04b0, 0x0413, 0x0110, 0x0110,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Paul Check <paul@openstreet.com> */
+UNUSUAL_DEV( 0x04b0, 0x0415, 0x0100, 0x0100,
+ "NIKON",
+ "NIKON DSC D2Xs",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* Reported by Shan Destromp (shansan@gmail.com) */
+UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100,
+ "NIKON",
+ "NIKON DSC D40X",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@ya.com> and
* Frank Copeland <fjc@thingy.apana.org.au> */
@@ -1463,6 +1484,17 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by fangxiaozhi <fangxiaozhi60675@huawei.com>
+ * and by linlei <linlei83@huawei.com>
+ * Patch reworked by Johann Wilhelm <johann.wilhelm@student.tugraz.at>
+ * This brings the HUAWEI E220 devices into multi-port mode
+ */
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 59181667066c..3451e8d03ab0 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -960,6 +960,10 @@ static int storage_probe(struct usb_interface *intf,
return -ENOMEM;
}
+ /*
+ * Allow 16-byte CDBs and thus > 2TB
+ */
+ host->max_cmd_len = 16;
us = host_to_us(host);
memset(us, 0, sizeof(struct us_data));
mutex_init(&(us->dev_mutex));
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 8de11deb5d14..c815a40e167f 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -125,6 +125,7 @@ static int skel_open(struct inode *inode, struct file *file)
/* save our object in the file's private structure */
file->private_data = dev;
+ mutex_unlock(&dev->io_mutex);
exit:
return retval;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 4f33a58fa9d1..c5c8f169d3cf 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -52,6 +52,7 @@ struct ep_device;
* @ep_dev: ep_device for sysfs info
* @extra: descriptors following this endpoint in the configuration
* @extralen: how many bytes of "extra" are valid
+ * @enabled: URBs may be submitted to this endpoint
*
* USB requests are always queued to a given endpoint, identified by a
* descriptor within an active interface in a given USB configuration.
@@ -64,6 +65,7 @@ struct usb_host_endpoint {
unsigned char *extra; /* Extra descriptors */
int extralen;
+ int enabled;
};
/* host-side wrapper for one interface setting's parsed descriptors */
@@ -344,6 +346,11 @@ struct usb_tt;
*
* Usbcore drivers should not set usbdev->state directly. Instead use
* usb_set_device_state().
+ *
+ * @authorized: (user space) policy determines if we authorize this
+ * device to be used or not. By default, wired USB
+ * devices are authorized. WUSB devices are not, until we
+ * authorize them from user space. FIXME -- complete doc
*/
struct usb_device {
int devnum; /* Address on USB bus */
@@ -376,8 +383,11 @@ struct usb_device {
u8 portnum; /* Parent port number (origin 1) */
u8 level; /* Number of USB hub ancestors */
+ unsigned can_submit:1; /* URBs may be submitted */
unsigned discon_suspended:1; /* Disconnected while suspended */
unsigned have_langid:1; /* whether string_langid is valid */
+ unsigned authorized:1; /* Policy has determined we can use it */
+ unsigned wusb:1; /* Device is Wireless USB */
int string_langid; /* language ID for strings */
/* static strings from the device */
@@ -405,6 +415,7 @@ struct usb_device {
int pm_usage_cnt; /* usage counter for autosuspend */
u32 quirks; /* quirks of the whole device */
+ atomic_t urbnum; /* number of URBs submitted for the whole device */
#ifdef CONFIG_PM
struct delayed_work autosuspend; /* for delayed autosuspends */
@@ -419,6 +430,7 @@ struct usb_device {
unsigned persist_enabled:1; /* USB_PERSIST enabled for this dev */
unsigned autosuspend_disabled:1; /* autosuspend and autoresume */
unsigned autoresume_disabled:1; /* disabled by the user */
+ unsigned skip_sys_resume:1; /* skip the next system resume */
#endif
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -555,6 +567,29 @@ static inline int usb_make_path (struct usb_device *dev, char *buf,
/*-------------------------------------------------------------------------*/
/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
* usb_endpoint_dir_in - check if the endpoint has IN direction
* @epd: endpoint to be checked
*
@@ -996,6 +1031,8 @@ extern int usb_disabled(void);
/*
* urb->transfer_flags:
+ *
+ * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
*/
#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame
@@ -1008,6 +1045,10 @@ extern int usb_disabled(void);
* needed */
#define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */
+#define URB_DIR_IN 0x0200 /* Transfer from device to host */
+#define URB_DIR_OUT 0
+#define URB_DIR_MASK URB_DIR_IN
+
struct usb_iso_packet_descriptor {
unsigned int offset;
unsigned int length; /* expected length */
@@ -1037,6 +1078,8 @@ typedef void (*usb_complete_t)(struct urb *);
* @urb_list: For use by current owner of the URB.
* @anchor_list: membership in the list of an anchor
* @anchor: to anchor URBs to a common mooring
+ * @ep: Points to the endpoint's data structure. Will eventually
+ * replace @pipe.
* @pipe: Holds endpoint number, direction, type, and more.
* Create these values with the eight macros available;
* usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
@@ -1201,10 +1244,10 @@ struct urb
{
/* private: usb core and host controller only fields in the urb */
struct kref kref; /* reference count of the URB */
- spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
atomic_t use_count; /* concurrent submissions counter */
u8 reject; /* submissions will fail */
+ int unlinked; /* unlink error code */
/* public: documented fields in the urb that can be used by drivers */
struct list_head urb_list; /* list head for use by the urb's
@@ -1212,6 +1255,7 @@ struct urb
struct list_head anchor_list; /* the URB may be anchored by the driver */
struct usb_anchor *anchor;
struct usb_device *dev; /* (in) pointer to associated device */
+ struct usb_host_endpoint *ep; /* (internal) pointer to endpoint struct */
unsigned int pipe; /* (in) pipe information */
int status; /* (return) non-ISO status */
unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
@@ -1257,7 +1301,6 @@ static inline void usb_fill_control_urb (struct urb *urb,
usb_complete_t complete_fn,
void *context)
{
- spin_lock_init(&urb->lock);
urb->dev = dev;
urb->pipe = pipe;
urb->setup_packet = setup_packet;
@@ -1288,7 +1331,6 @@ static inline void usb_fill_bulk_urb (struct urb *urb,
usb_complete_t complete_fn,
void *context)
{
- spin_lock_init(&urb->lock);
urb->dev = dev;
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
@@ -1324,7 +1366,6 @@ static inline void usb_fill_int_urb (struct urb *urb,
void *context,
int interval)
{
- spin_lock_init(&urb->lock);
urb->dev = dev;
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
@@ -1352,6 +1393,30 @@ extern void usb_unanchor_urb(struct urb *urb);
extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
unsigned int timeout);
+/**
+ * usb_urb_dir_in - check if an URB describes an IN transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an IN transfer (device-to-host),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_in(struct urb *urb)
+{
+ return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN;
+}
+
+/**
+ * usb_urb_dir_out - check if an URB describes an OUT transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an OUT transfer (host-to-device),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_out(struct urb *urb)
+{
+ return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
+}
+
void *usb_buffer_alloc (struct usb_device *dev, size_t size,
gfp_t mem_flags, dma_addr_t *dma);
void usb_buffer_free (struct usb_device *dev, size_t size,
@@ -1364,13 +1429,13 @@ void usb_buffer_unmap (struct urb *urb);
#endif
struct scatterlist;
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int nents);
#if 0
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents);
#endif
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents);
/*-------------------------------------------------------------------*
diff --git a/include/linux/usb_gadget.h b/include/linux/usb/gadget.h
index 4f59b2aa8a9e..46705e91573d 100644
--- a/include/linux/usb_gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1,5 +1,5 @@
/*
- * <linux/usb_gadget.h>
+ * <linux/usb/gadget.h>
*
* We call the USB code inside a Linux-based peripheral device a "gadget"
* driver, except for the hardware-specific bus glue. One USB host can
@@ -22,10 +22,10 @@ struct usb_ep;
/**
* struct usb_request - describes one i/o request
* @buf: Buffer used for data. Always provide this; some controllers
- * only use PIO, or don't use DMA for some endpoints.
+ * only use PIO, or don't use DMA for some endpoints.
* @dma: DMA address corresponding to 'buf'. If you don't set this
- * field, and the usb controller needs one, it is responsible
- * for mapping and unmapping the buffer.
+ * field, and the usb controller needs one, it is responsible
+ * for mapping and unmapping the buffer.
* @length: Length of that data
* @no_interrupt: If true, hints that no completion irq is needed.
* Helpful sometimes with deep request queues that are handled
@@ -45,16 +45,16 @@ struct usb_ep;
* @context: For use by the completion callback
* @list: For use by the gadget driver.
* @status: Reports completion code, zero or a negative errno.
- * Normally, faults block the transfer queue from advancing until
- * the completion callback returns.
- * Code "-ESHUTDOWN" indicates completion caused by device disconnect,
- * or when the driver disabled the endpoint.
+ * Normally, faults block the transfer queue from advancing until
+ * the completion callback returns.
+ * Code "-ESHUTDOWN" indicates completion caused by device disconnect,
+ * or when the driver disabled the endpoint.
* @actual: Reports bytes transferred to/from the buffer. For reads (OUT
- * transfers) this may be less than the requested length. If the
- * short_not_ok flag is set, short reads are treated as errors
- * even when status otherwise indicates successful completion.
- * Note that for writes (IN transfers) some data bytes may still
- * reside in a device-side FIFO when the request is reported as
+ * transfers) this may be less than the requested length. If the
+ * short_not_ok flag is set, short reads are treated as errors
+ * even when status otherwise indicates successful completion.
+ * Note that for writes (IN transfers) some data bytes may still
+ * reside in a device-side FIFO when the request is reported as
* complete.
*
* These are allocated/freed through the endpoint they're used with. The
@@ -128,7 +128,7 @@ struct usb_ep_ops {
* value can sometimes be reduced (hardware allowing), according to
* the endpoint descriptor used to configure the endpoint.
* @driver_data:for use by the gadget driver. all other fields are
- * read-only to gadget drivers.
+ * read-only to gadget drivers.
*
* the bus controller driver lists all the general purpose endpoints in
* gadget->ep_list. the control endpoint (gadget->ep0) is not in that list,
@@ -148,10 +148,10 @@ struct usb_ep {
/**
* usb_ep_enable - configure endpoint, making it usable
* @ep:the endpoint being configured. may not be the endpoint named "ep0".
- * drivers discover endpoints through the ep_list of a usb_gadget.
+ * drivers discover endpoints through the ep_list of a usb_gadget.
* @desc:descriptor for desired behavior. caller guarantees this pointer
- * remains valid until the endpoint is disabled; the data byte order
- * is little-endian (usb-standard).
+ * remains valid until the endpoint is disabled; the data byte order
+ * is little-endian (usb-standard).
*
* when configurations are set, or when interface settings change, the driver
* will enable or disable the relevant endpoints. while it is enabled, an
@@ -232,7 +232,7 @@ usb_ep_free_request (struct usb_ep *ep, struct usb_request *req)
* @ep:the endpoint associated with the request
* @req:the request being submitted
* @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
- * pre-allocate all necessary memory with the request.
+ * pre-allocate all necessary memory with the request.
*
* This tells the device controller to perform the specified request through
* that endpoint (reading or writing a buffer). When the request completes,
@@ -415,7 +415,7 @@ struct usb_gadget_ops {
* struct usb_gadget - represents a usb slave device
* @ops: Function pointers used to access hardware-specific operations.
* @ep0: Endpoint zero, used when reading or writing responses to
- * driver setup() requests
+ * driver setup() requests
* @ep_list: List of other endpoints supported by the device.
* @speed: Speed of current connection to USB host.
* @is_dualspeed: True if the controller supports both high and full speed
@@ -432,7 +432,7 @@ struct usb_gadget_ops {
* @b_hnp_enable: OTG device feature flag, indicating that the A-Host
* enabled HNP support.
* @name: Identifies the controller hardware type. Used in diagnostics
- * and sometimes configuration.
+ * and sometimes configuration.
* @dev: Driver model state for this abstract device.
*
* Gadgets have a mostly-portable "gadget driver" implementing device
@@ -480,6 +480,39 @@ static inline void *get_gadget_data (struct usb_gadget *gadget)
/**
+ * gadget_is_dualspeed - return true iff the hardware handles high speed
+ * @gadget: controller that might support both high and full speeds
+ */
+static inline int gadget_is_dualspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ /* runtime test would check "g->is_dualspeed" ... that might be
+ * useful to work around hardware bugs, but is mostly pointless
+ */
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+/**
+ * gadget_is_otg - return true iff the hardware is OTG-ready
+ * @gadget: controller that might have a Mini-AB connector
+ *
+ * This is a runtime test, since kernels with a USB-OTG stack sometimes
+ * run on boards which only have a Mini-B (or Mini-A) connector.
+ */
+static inline int gadget_is_otg(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_OTG
+ return g->is_otg;
+#else
+ return 0;
+#endif
+}
+
+
+/**
* usb_gadget_frame_number - returns the current frame number
* @gadget: controller that reports the frame number
*
@@ -655,23 +688,23 @@ usb_gadget_disconnect (struct usb_gadget *gadget)
* @function: String describing the gadget's function
* @speed: Highest speed the driver handles.
* @bind: Invoked when the driver is bound to a gadget, usually
- * after registering the driver.
- * At that point, ep0 is fully initialized, and ep_list holds
- * the currently-available endpoints.
- * Called in a context that permits sleeping.
+ * after registering the driver.
+ * At that point, ep0 is fully initialized, and ep_list holds
+ * the currently-available endpoints.
+ * Called in a context that permits sleeping.
* @setup: Invoked for ep0 control requests that aren't handled by
- * the hardware level driver. Most calls must be handled by
- * the gadget driver, including descriptor and configuration
- * management. The 16 bit members of the setup data are in
- * USB byte order. Called in_interrupt; this may not sleep. Driver
+ * the hardware level driver. Most calls must be handled by
+ * the gadget driver, including descriptor and configuration
+ * management. The 16 bit members of the setup data are in
+ * USB byte order. Called in_interrupt; this may not sleep. Driver
* queues a response to ep0, or returns negative to stall.
* @disconnect: Invoked after all transfers have been stopped,
- * when the host is disconnected. May be called in_interrupt; this
- * may not sleep. Some devices can't detect disconnect, so this might
+ * when the host is disconnected. May be called in_interrupt; this
+ * may not sleep. Some devices can't detect disconnect, so this might
* not be called except as part of controller shutdown.
* @unbind: Invoked when the driver is unbound from a gadget,
- * usually from rmmod (after a disconnect is reported).
- * Called in a context that permits sleeping.
+ * usually from rmmod (after a disconnect is reported).
+ * Called in a context that permits sleeping.
* @suspend: Invoked on USB suspend. May be called in_interrupt.
* @resume: Invoked on USB resume. May be called in_interrupt.
* @driver: Driver model state for this driver.
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 8da374caf582..2692ec9389ca 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -4,11 +4,8 @@
* belong here.
*/
-/* device must not be autosuspended */
-#define USB_QUIRK_NO_AUTOSUSPEND 0x00000001
-
/* string descriptors must not be fetched using a 255-byte read */
-#define USB_QUIRK_STRING_FETCH_255 0x00000002
+#define USB_QUIRK_STRING_FETCH_255 0x00000001
/* device can't resume correctly so reset it instead */
-#define USB_QUIRK_RESET_RESUME 0x00000004
+#define USB_QUIRK_RESET_RESUME 0x00000002
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index e8b8928232c8..488ce128885c 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -141,7 +141,7 @@ struct usb_serial {
};
#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
-#define NUM_DONT_CARE (-1)
+#define NUM_DONT_CARE 99
/* get and set the serial private data pointer helper functions */
static inline void *usb_get_serial_data (struct usb_serial *serial)
@@ -160,12 +160,18 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
* in the syslog messages when a device is inserted or removed.
* @id_table: pointer to a list of usb_device_id structures that define all
* of the devices this structure can support.
- * @num_interrupt_in: the number of interrupt in endpoints this device will
- * have.
- * @num_interrupt_out: the number of interrupt out endpoints this device will
- * have.
- * @num_bulk_in: the number of bulk in endpoints this device will have.
- * @num_bulk_out: the number of bulk out endpoints this device will have.
+ * @num_interrupt_in: If a device doesn't have this many interrupt-in
+ * endpoints, it won't be sent to the driver's attach() method.
+ * (But it might still be sent to the probe() method.)
+ * @num_interrupt_out: If a device doesn't have this many interrupt-out
+ * endpoints, it won't be sent to the driver's attach() method.
+ * (But it might still be sent to the probe() method.)
+ * @num_bulk_in: If a device doesn't have this many bulk-in
+ * endpoints, it won't be sent to the driver's attach() method.
+ * (But it might still be sent to the probe() method.)
+ * @num_bulk_out: If a device doesn't have this many bulk-out
+ * endpoints, it won't be sent to the driver's attach() method.
+ * (But it might still be sent to the probe() method.)
* @num_ports: the number of different ports this device will have.
* @calc_num_ports: pointer to a function to determine how many ports this
* device has dynamically. It will be called after the probe()
diff --git a/include/linux/usb_sl811.h b/include/linux/usb_sl811.h
deleted file mode 100644
index 4f2d012d7309..000000000000
--- a/include/linux/usb_sl811.h
+++ /dev/null
@@ -1,26 +0,0 @@
-
-/*
- * board initialization should put one of these into dev->platform_data
- * and place the sl811hs onto platform_bus named "sl811-hcd".
- */
-
-struct sl811_platform_data {
- unsigned can_wakeup:1;
-
- /* given port_power, msec/2 after power on till power good */
- u8 potpg;
-
- /* mA/2 power supplied on this port (max = default = 250) */
- u8 power;
-
- /* sl811 relies on an external source of VBUS current */
- void (*port_power)(struct device *dev, int is_on);
-
- /* pulse sl811 nRST (probably with a GPIO) */
- void (*reset)(struct device *dev);
-
- // some boards need something like these:
- // int (*check_overcurrent)(struct device *dev);
- // void (*clock_enable)(struct device *dev, int is_on);
-};
-