summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/input/sentelic.txt1008
1 files changed, 518 insertions, 490 deletions
diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt
index 89251e2a3eba..d1a476f973b1 100644
--- a/Documentation/input/sentelic.txt
+++ b/Documentation/input/sentelic.txt
@@ -1,411 +1,437 @@
-Copyright (C) 2002-2011 Sentelic Corporation.
-Last update: Dec-07-2011
+.. include:: <isonum.txt>
+
+===============
+Sentelic Driver
+===============
+
+
+:Copyright: |copy| 2002-2011 Sentelic Corporation.
+
+:Last update: Dec-07-2011
+
+Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
+==========================================================================
-==============================================================================
-* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
-==============================================================================
A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward
page (5th button)
-@1. Set sample rate to 200;
-@2. Set sample rate to 200;
-@3. Set sample rate to 80;
-@4. Issuing the "Get device ID" command (0xF2) and waits for the response;
-@5. FSP will respond 0x04.
-
-Packet 1
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7 => Y overflow
- Bit6 => X overflow
- Bit5 => Y sign bit
- Bit4 => X sign bit
- Bit3 => 1
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: X Movement(9-bit 2's complement integers)
-Byte 3: Y Movement(9-bit 2's complement integers)
-Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report.
- valid values, -8 ~ +7
- Bit4 => 1 = 4th mouse button is pressed, Forward one page.
- 0 = 4th mouse button is not pressed.
- Bit5 => 1 = 5th mouse button is pressed, Backward one page.
- 0 = 5th mouse button is not pressed.
-
-B) MSID 6: Horizontal and Vertical scrolling.
-@ Set bit 1 in register 0x40 to 1
-
-# FSP replaces scrolling wheel's movement as 4 bits to show horizontal and
- vertical scrolling.
-
-Packet 1
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7 => Y overflow
- Bit6 => X overflow
- Bit5 => Y sign bit
- Bit4 => X sign bit
- Bit3 => 1
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: X Movement(9-bit 2's complement integers)
-Byte 3: Y Movement(9-bit 2's complement integers)
-Byte 4: Bit0 => the Vertical scrolling movement downward.
- Bit1 => the Vertical scrolling movement upward.
- Bit2 => the Horizontal scrolling movement leftward.
- Bit3 => the Horizontal scrolling movement rightward.
- Bit4 => 1 = 4th mouse button is pressed, Forward one page.
- 0 = 4th mouse button is not pressed.
- Bit5 => 1 = 5th mouse button is pressed, Backward one page.
- 0 = 5th mouse button is not pressed.
-
-C) MSID 7:
-# FSP uses 2 packets (8 Bytes) to represent Absolute Position.
- so we have PACKET NUMBER to identify packets.
+
+1. Set sample rate to 200;
+2. Set sample rate to 200;
+3. Set sample rate to 80;
+4. Issuing the "Get device ID" command (0xF2) and waits for the response;
+5. FSP will respond 0x04.
+
+::
+
+ Packet 1
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7 => Y overflow
+ Bit6 => X overflow
+ Bit5 => Y sign bit
+ Bit4 => X sign bit
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: X Movement(9-bit 2's complement integers)
+ Byte 3: Y Movement(9-bit 2's complement integers)
+ Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report.
+ valid values, -8 ~ +7
+ Bit4 => 1 = 4th mouse button is pressed, Forward one page.
+ 0 = 4th mouse button is not pressed.
+ Bit5 => 1 = 5th mouse button is pressed, Backward one page.
+ 0 = 5th mouse button is not pressed.
+
+B) MSID 6: Horizontal and Vertical scrolling
+
+- Set bit 1 in register 0x40 to 1
+
+FSP replaces scrolling wheel's movement as 4 bits to show horizontal and
+vertical scrolling.
+
+::
+
+ Packet 1
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7 => Y overflow
+ Bit6 => X overflow
+ Bit5 => Y sign bit
+ Bit4 => X sign bit
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: X Movement(9-bit 2's complement integers)
+ Byte 3: Y Movement(9-bit 2's complement integers)
+ Byte 4: Bit0 => the Vertical scrolling movement downward.
+ Bit1 => the Vertical scrolling movement upward.
+ Bit2 => the Horizontal scrolling movement leftward.
+ Bit3 => the Horizontal scrolling movement rightward.
+ Bit4 => 1 = 4th mouse button is pressed, Forward one page.
+ 0 = 4th mouse button is not pressed.
+ Bit5 => 1 = 5th mouse button is pressed, Backward one page.
+ 0 = 5th mouse button is not pressed.
+
+C) MSID 7
+
+FSP uses 2 packets (8 Bytes) to represent Absolute Position.
+so we have PACKET NUMBER to identify packets.
+
If PACKET NUMBER is 0, the packet is Packet 1.
If PACKET NUMBER is 1, the packet is Packet 2.
Please count this number in program.
-# MSID6 special packet will be enable at the same time when enable MSID 7.
-
-==============================================================================
-* Absolute position for STL3886-G0.
-==============================================================================
-@ Set bit 2 or 3 in register 0x40 to 1
-@ Set bit 6 in register 0x40 to 1
-
-Packet 1 (ABSOLUTE POSITION)
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
- => 10, Notify packet
- Bit5 => valid bit
- Bit4 => 1
- Bit3 => 1
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: X coordinate (xpos[9:2])
-Byte 3: Y coordinate (ypos[9:2])
-Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
- Bit3~Bit2 => X coordinate (ypos[1:0])
- Bit4 => scroll up
- Bit5 => scroll down
- Bit6 => scroll left
- Bit7 => scroll right
-
-Notify Packet for G0
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
- => 10, Notify packet
- Bit5 => 0
- Bit4 => 1
- Bit3 => 1
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: Message Type => 0x5A (Enable/Disable status packet)
- Mode Type => 0xA5 (Normal/Icon mode status)
-Byte 3: Message Type => 0x00 (Disabled)
- => 0x01 (Enabled)
- Mode Type => 0x00 (Normal)
- => 0x01 (Icon)
-Byte 4: Bit7~Bit0 => Don't Care
-
-==============================================================================
-* Absolute position for STL3888-Ax.
-==============================================================================
-Packet 1 (ABSOLUTE POSITION)
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
- => 10, Notify packet
- => 11, Normal data packet with on-pad click
- Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
- When both fingers are up, the last two reports have zero valid
- bit.
- Bit4 => arc
- Bit3 => 1
- Bit2 => Left Button, 1 is pressed, 0 is released.
- Bit1 => 0
- Bit0 => 1
-Byte 2: X coordinate (xpos[9:2])
-Byte 3: Y coordinate (ypos[9:2])
-Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
- Bit3~Bit2 => X coordinate (ypos[1:0])
- Bit5~Bit4 => y1_g
- Bit7~Bit6 => x1_g
-
-Packet 2 (ABSOLUTE POSITION)
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordinates packet
- => 10, Notify packet
- => 11, Normal data packet with on-pad click
- Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
- When both fingers are up, the last two reports have zero valid
- bit.
- Bit4 => arc
- Bit3 => 1
- Bit2 => Right Button, 1 is pressed, 0 is released.
- Bit1 => 1
- Bit0 => 0
-Byte 2: X coordinate (xpos[9:2])
-Byte 3: Y coordinate (ypos[9:2])
-Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
- Bit3~Bit2 => X coordinate (ypos[1:0])
- Bit5~Bit4 => y2_g
- Bit7~Bit6 => x2_g
-
-Notify Packet for STL3888-Ax
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordinates packet
- => 10, Notify packet
- => 11, Normal data packet with on-pad click
- Bit5 => 1
- Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
- 0: left button is generated by the on-pad command
- 1: left button is generated by the external button
- Bit3 => 1
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
-Byte 3: Bit7~Bit6 => Don't care
- Bit5~Bit4 => Number of fingers
- Bit3~Bit1 => Reserved
- Bit0 => 1: enter gesture mode; 0: leaving gesture mode
-Byte 4: Bit7 => scroll right button
- Bit6 => scroll left button
- Bit5 => scroll down button
- Bit4 => scroll up button
- * Note that if gesture and additional button (Bit4~Bit7)
- happen at the same time, the button information will not
- be sent.
- Bit3~Bit0 => Reserved
+MSID6 special packet will be enable at the same time when enable MSID 7.
+
+Absolute position for STL3886-G0
+================================
+
+1. Set bit 2 or 3 in register 0x40 to 1
+2. Set bit 6 in register 0x40 to 1
+
+::
+
+ Packet 1 (ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => valid bit
+ Bit4 => 1
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: X coordinate (xpos[9:2])
+ Byte 3: Y coordinate (ypos[9:2])
+ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => scroll up
+ Bit5 => scroll down
+ Bit6 => scroll left
+ Bit7 => scroll right
+
+ Notify Packet for G0
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => 0
+ Bit4 => 1
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: Message Type => 0x5A (Enable/Disable status packet)
+ Mode Type => 0xA5 (Normal/Icon mode status)
+ Byte 3: Message Type => 0x00 (Disabled)
+ => 0x01 (Enabled)
+ Mode Type => 0x00 (Normal)
+ => 0x01 (Icon)
+ Byte 4: Bit7~Bit0 => Don't Care
+
+Absolute position for STL3888-Ax
+================================
+
+::
+
+ Packet 1 (ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ => 11, Normal data packet with on-pad click
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => arc
+ Bit3 => 1
+ Bit2 => Left Button, 1 is pressed, 0 is released.
+ Bit1 => 0
+ Bit0 => 1
+ Byte 2: X coordinate (xpos[9:2])
+ Byte 3: Y coordinate (ypos[9:2])
+ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit5~Bit4 => y1_g
+ Bit7~Bit6 => x1_g
+
+ Packet 2 (ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ => 11, Normal data packet with on-pad click
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => arc
+ Bit3 => 1
+ Bit2 => Right Button, 1 is pressed, 0 is released.
+ Bit1 => 1
+ Bit0 => 0
+ Byte 2: X coordinate (xpos[9:2])
+ Byte 3: Y coordinate (ypos[9:2])
+ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit5~Bit4 => y2_g
+ Bit7~Bit6 => x2_g
+
+ Notify Packet for STL3888-Ax
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ => 11, Normal data packet with on-pad click
+ Bit5 => 1
+ Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
+ 0: left button is generated by the on-pad command
+ 1: left button is generated by the external button
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
+ Byte 3: Bit7~Bit6 => Don't care
+ Bit5~Bit4 => Number of fingers
+ Bit3~Bit1 => Reserved
+ Bit0 => 1: enter gesture mode; 0: leaving gesture mode
+ Byte 4: Bit7 => scroll right button
+ Bit6 => scroll left button
+ Bit5 => scroll down button
+ Bit4 => scroll up button
+ * Note that if gesture and additional button (Bit4~Bit7)
+ happen at the same time, the button information will not
+ be sent.
+ Bit3~Bit0 => Reserved
Sample sequence of Multi-finger, Multi-coordinate mode:
notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
abs pkt 2, ..., notify packet (valid bit == 0)
-==============================================================================
-* Absolute position for STL3888-B0.
-==============================================================================
-Packet 1(ABSOLUTE POSITION)
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordinates packet
- => 10, Notify packet
- => 11, Normal data packet with on-pad click
- Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
- When both fingers are up, the last two reports have zero valid
- bit.
- Bit4 => finger up/down information. 1: finger down, 0: finger up.
- Bit3 => 1
- Bit2 => finger index, 0 is the first finger, 1 is the second finger.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: X coordinate (xpos[9:2])
-Byte 3: Y coordinate (ypos[9:2])
-Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
- Bit3~Bit2 => X coordinate (ypos[1:0])
- Bit4 => scroll down button
- Bit5 => scroll up button
- Bit6 => scroll left button
- Bit7 => scroll right button
-
-Packet 2 (ABSOLUTE POSITION)
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
- => 10, Notify packet
- => 11, Normal data packet with on-pad click
- Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
- When both fingers are up, the last two reports have zero valid
- bit.
- Bit4 => finger up/down information. 1: finger down, 0: finger up.
- Bit3 => 1
- Bit2 => finger index, 0 is the first finger, 1 is the second finger.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: X coordinate (xpos[9:2])
-Byte 3: Y coordinate (ypos[9:2])
-Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
- Bit3~Bit2 => X coordinate (ypos[1:0])
- Bit4 => scroll down button
- Bit5 => scroll up button
- Bit6 => scroll left button
- Bit7 => scroll right button
-
-Notify Packet for STL3888-B0
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
- => 10, Notify packet
- => 11, Normal data packet with on-pad click
- Bit5 => 1
- Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
- 0: left button is generated by the on-pad command
- 1: left button is generated by the external button
- Bit3 => 1
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
-Byte 3: Bit7~Bit6 => Don't care
- Bit5~Bit4 => Number of fingers
- Bit3~Bit1 => Reserved
- Bit0 => 1: enter gesture mode; 0: leaving gesture mode
-Byte 4: Bit7 => scroll right button
- Bit6 => scroll left button
- Bit5 => scroll up button
- Bit4 => scroll down button
- * Note that if gesture and additional button(Bit4~Bit7)
- happen at the same time, the button information will not
- be sent.
- Bit3~Bit0 => Reserved
+Absolute position for STL3888-B0
+================================
+
+::
+
+ Packet 1(ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ => 11, Normal data packet with on-pad click
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => finger up/down information. 1: finger down, 0: finger up.
+ Bit3 => 1
+ Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: X coordinate (xpos[9:2])
+ Byte 3: Y coordinate (ypos[9:2])
+ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => scroll down button
+ Bit5 => scroll up button
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+ Packet 2 (ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ => 11, Normal data packet with on-pad click
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => finger up/down information. 1: finger down, 0: finger up.
+ Bit3 => 1
+ Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: X coordinate (xpos[9:2])
+ Byte 3: Y coordinate (ypos[9:2])
+ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => scroll down button
+ Bit5 => scroll up button
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+Notify Packet for STL3888-B0::
+
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ => 11, Normal data packet with on-pad click
+ Bit5 => 1
+ Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
+ 0: left button is generated by the on-pad command
+ 1: left button is generated by the external button
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
+ Byte 3: Bit7~Bit6 => Don't care
+ Bit5~Bit4 => Number of fingers
+ Bit3~Bit1 => Reserved
+ Bit0 => 1: enter gesture mode; 0: leaving gesture mode
+ Byte 4: Bit7 => scroll right button
+ Bit6 => scroll left button
+ Bit5 => scroll up button
+ Bit4 => scroll down button
+ * Note that if gesture and additional button(Bit4~Bit7)
+ happen at the same time, the button information will not
+ be sent.
+ Bit3~Bit0 => Reserved
Sample sequence of Multi-finger, Multi-coordinate mode:
notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
abs pkt 2, ..., notify packet (valid bit == 0)
-==============================================================================
-* Absolute position for STL3888-Cx and STL3888-Dx.
-==============================================================================
-Single Finger, Absolute Coordinate Mode (SFAC)
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordinates packet
- => 10, Notify packet
- Bit5 => Coordinate mode(always 0 in SFAC mode):
- 0: single-finger absolute coordinates (SFAC) mode
- 1: multi-finger, multiple coordinates (MFMC) mode
- Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
- 1: The LEFT button is generated by external button
- Default is 1 even if the LEFT button is not pressed.
- Bit3 => Always 1, as specified by PS/2 protocol.
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: X coordinate (xpos[9:2])
-Byte 3: Y coordinate (ypos[9:2])
-Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
- Bit3~Bit2 => X coordinate (ypos[1:0])
- Bit4 => 4th mouse button(forward one page)
- Bit5 => 5th mouse button(backward one page)
- Bit6 => scroll left button
- Bit7 => scroll right button
-
-Multi Finger, Multiple Coordinates Mode (MFMC):
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
- => 10, Notify packet
- Bit5 => Coordinate mode (always 1 in MFMC mode):
- 0: single-finger absolute coordinates (SFAC) mode
- 1: multi-finger, multiple coordinates (MFMC) mode
- Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
- 1: The LEFT button is generated by external button
- Default is 1 even if the LEFT button is not pressed.
- Bit3 => Always 1, as specified by PS/2 protocol.
- Bit2 => Finger index, 0 is the first finger, 1 is the second finger.
- If bit 1 and 0 are all 1 and bit 4 is 0, the middle external
- button is pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: X coordinate (xpos[9:2])
-Byte 3: Y coordinate (ypos[9:2])
-Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
- Bit3~Bit2 => X coordinate (ypos[1:0])
- Bit4 => 4th mouse button(forward one page)
- Bit5 => 5th mouse button(backward one page)
- Bit6 => scroll left button
- Bit7 => scroll right button
-
- When one of the two fingers is up, the device will output four consecutive
+Absolute position for STL3888-Cx and STL3888-Dx
+===============================================
+
+::
+
+ Single Finger, Absolute Coordinate Mode (SFAC)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ Bit5 => Coordinate mode(always 0 in SFAC mode):
+ 0: single-finger absolute coordinates (SFAC) mode
+ 1: multi-finger, multiple coordinates (MFMC) mode
+ Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
+ 1: The LEFT button is generated by external button
+ Default is 1 even if the LEFT button is not pressed.
+ Bit3 => Always 1, as specified by PS/2 protocol.
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: X coordinate (xpos[9:2])
+ Byte 3: Y coordinate (ypos[9:2])
+ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => 4th mouse button(forward one page)
+ Bit5 => 5th mouse button(backward one page)
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+ Multi Finger, Multiple Coordinates Mode (MFMC):
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => Coordinate mode (always 1 in MFMC mode):
+ 0: single-finger absolute coordinates (SFAC) mode
+ 1: multi-finger, multiple coordinates (MFMC) mode
+ Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
+ 1: The LEFT button is generated by external button
+ Default is 1 even if the LEFT button is not pressed.
+ Bit3 => Always 1, as specified by PS/2 protocol.
+ Bit2 => Finger index, 0 is the first finger, 1 is the second finger.
+ If bit 1 and 0 are all 1 and bit 4 is 0, the middle external
+ button is pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: X coordinate (xpos[9:2])
+ Byte 3: Y coordinate (ypos[9:2])
+ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => 4th mouse button(forward one page)
+ Bit5 => 5th mouse button(backward one page)
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+When one of the two fingers is up, the device will output four consecutive
MFMC#0 report packets with zero X and Y to represent 1st finger is up or
four consecutive MFMC#1 report packets with zero X and Y to represent that
the 2nd finger is up. On the other hand, if both fingers are up, the device
will output four consecutive single-finger, absolute coordinate(SFAC) packets
with zero X and Y.
-Notify Packet for STL3888-Cx/Dx
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0|
- |---------------| |---------------| |---------------| |---------------|
-
-Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordinates packet
- => 10, Notify packet
- Bit5 => Always 0
- Bit4 => 0: The LEFT button is generated by on-pad command(OPC)
- 1: The LEFT button is generated by external button
- Default is 1 even if the LEFT button is not pressed.
- Bit3 => 1
- Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
- Bit1 => Right Button, 1 is pressed, 0 is not pressed.
- Bit0 => Left Button, 1 is pressed, 0 is not pressed.
-Byte 2: Message type:
- 0xba => gesture information
- 0xc0 => one finger hold-rotating gesture
-Byte 3: The first parameter for the received message:
- 0xba => gesture ID (refer to the 'Gesture ID' section)
- 0xc0 => region ID
-Byte 4: The second parameter for the received message:
- 0xba => N/A
- 0xc0 => finger up/down information
+Notify Packet for STL3888-Cx/Dx::
+
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0|
+ |---------------| |---------------| |---------------| |---------------|
+
+ Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ Bit5 => Always 0
+ Bit4 => 0: The LEFT button is generated by on-pad command(OPC)
+ 1: The LEFT button is generated by external button
+ Default is 1 even if the LEFT button is not pressed.
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+ Byte 2: Message type:
+ 0xba => gesture information
+ 0xc0 => one finger hold-rotating gesture
+ Byte 3: The first parameter for the received message:
+ 0xba => gesture ID (refer to the 'Gesture ID' section)
+ 0xc0 => region ID
+ Byte 4: The second parameter for the received message:
+ 0xba => N/A
+ 0xc0 => finger up/down information
Sample sequence of Multi-finger, Multi-coordinates mode:
@@ -416,50 +442,51 @@ Sample sequence of Multi-finger, Multi-coordinates mode:
That is, when the device is in MFMC mode, the host will receive
interleaved absolute coordinate packets for each finger.
-==============================================================================
-* FSP Enable/Disable packet
-==============================================================================
- Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
-BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | |
- |---------------| |---------------| |---------------| |---------------|
-
-FSP will send out enable/disable packet when FSP receive PS/2 enable/disable
-command. Host will receive the packet which Middle, Right, Left button will
-be set. The packet only use byte 0 and byte 1 as a pattern of original packet.
-Ignore the other bytes of the packet.
-
-Byte 1: Bit7 => 0, Y overflow
- Bit6 => 0, X overflow
- Bit5 => 0, Y sign bit
- Bit4 => 0, X sign bit
- Bit3 => 1
- Bit2 => 1, Middle Button
- Bit1 => 1, Right Button
- Bit0 => 1, Left Button
-Byte 2: Bit7~1 => (0101101b)
- Bit0 => 1 = Enable
- 0 = Disable
-Byte 3: Don't care
-Byte 4: Don't care (MOUSE ID 3, 4)
-Byte 5~8: Don't care (Absolute packet)
-
-==============================================================================
-* PS/2 Command Set
-==============================================================================
+FSP Enable/Disable packet
+=========================
+
+::
+
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | |
+ |---------------| |---------------| |---------------| |---------------|
+
+ FSP will send out enable/disable packet when FSP receive PS/2 enable/disable
+ command. Host will receive the packet which Middle, Right, Left button will
+ be set. The packet only use byte 0 and byte 1 as a pattern of original packet.
+ Ignore the other bytes of the packet.
+
+ Byte 1: Bit7 => 0, Y overflow
+ Bit6 => 0, X overflow
+ Bit5 => 0, Y sign bit
+ Bit4 => 0, X sign bit
+ Bit3 => 1
+ Bit2 => 1, Middle Button
+ Bit1 => 1, Right Button
+ Bit0 => 1, Left Button
+ Byte 2: Bit7~1 => (0101101b)
+ Bit0 => 1 = Enable
+ 0 = Disable
+ Byte 3: Don't care
+ Byte 4: Don't care (MOUSE ID 3, 4)
+ Byte 5~8: Don't care (Absolute packet)
+
+PS/2 Command Set
+================
FSP supports basic PS/2 commanding set and modes, refer to following URL for
details about PS/2 commands:
http://www.computer-engineering.org/ps2mouse/
-==============================================================================
-* Programming Sequence for Determining Packet Parsing Flow
-==============================================================================
+Programming Sequence for Determining Packet Parsing Flow
+========================================================
+
1. Identify FSP by reading device ID(0x00) and version(0x01) register
-2a. For FSP version < STL3888 Cx, determine number of buttons by reading
- the 'test mode status' (0x20) register:
+2. For FSP version < STL3888 Cx, determine number of buttons by reading
+ the 'test mode status' (0x20) register::
buttons = reg[0x20] & 0x30
@@ -476,25 +503,24 @@ http://www.computer-engineering.org/ps2mouse/
Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
section A for packet parsing detail
-2b. For FSP version >= STL3888 Cx:
+3. For FSP version >= STL3888 Cx:
Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
section A for packet parsing detail (ignore byte 4, bit ~ 7)
-==============================================================================
-* Programming Sequence for Register Reading/Writing
-==============================================================================
+Programming Sequence for Register Reading/Writing
+=================================================
Register inversion requirement:
- Following values needed to be inverted(the '~' operator in C) before being
-sent to FSP:
+Following values needed to be inverted(the '~' operator in C) before being
+sent to FSP::
0xe8, 0xe9, 0xee, 0xf2, 0xf3 and 0xff.
Register swapping requirement:
- Following values needed to have their higher 4 bits and lower 4 bits being
-swapped before being sent to FSP:
+Following values needed to have their higher 4 bits and lower 4 bits being
+swapped before being sent to FSP::
10, 20, 40, 60, 80, 100 and 200.
@@ -512,33 +538,33 @@ Register reading sequence:
inverted(refer to the 'Register inversion requirement' section),
goto step 6
- 5a. send 0x68 PS/2 command to FSP;
+ a. send 0x68 PS/2 command to FSP;
- 5b. send the inverted register address to FSP and goto step 8;
+ b. send the inverted register address to FSP and goto step 8;
6. if the register address being to read is not required to be
swapped(refer to the 'Register swapping requirement' section),
goto step 7
- 6a. send 0xcc PS/2 command to FSP;
+ a. send 0xcc PS/2 command to FSP;
- 6b. send the swapped register address to FSP and goto step 8;
+ b. send the swapped register address to FSP and goto step 8;
7. send 0x66 PS/2 command to FSP;
- 7a. send the original register address to FSP and goto step 8;
+ a. send the original register address to FSP and goto step 8;
8. send 0xe9(status request) PS/2 command to FSP;
9. the 4th byte of the response read from FSP should be the
- requested register value(?? indicates don't care byte):
+ requested register value(?? indicates don't care byte)::
host: 0xe9
3888: 0xfa (??) (??) (val)
* Note that since the Cx release, the hardware will return 1's
- complement of the register value at the 3rd byte of status request
- result:
+ complement of the register value at the 3rd byte of status request
+ result::
host: 0xe9
3888: 0xfa (??) (~val) (val)
@@ -551,21 +577,21 @@ Register writing sequence:
inverted(refer to the 'Register inversion requirement' section),
goto step 3
- 2a. send 0x74 PS/2 command to FSP;
+ a. send 0x74 PS/2 command to FSP;
- 2b. send the inverted register address to FSP and goto step 5;
+ b. send the inverted register address to FSP and goto step 5;
3. if the register address being to write is not required to be
swapped(refer to the 'Register swapping requirement' section),
goto step 4
- 3a. send 0x77 PS/2 command to FSP;
+ a. send 0x77 PS/2 command to FSP;
- 3b. send the swapped register address to FSP and goto step 5;
+ b. send the swapped register address to FSP and goto step 5;
4. send 0x55 PS/2 command to FSP;
- 4a. send the register address to FSP and goto step 5;
+ a. send the register address to FSP and goto step 5;
5. send 0xf3 PS/2 command to FSP;
@@ -573,43 +599,42 @@ Register writing sequence:
inverted(refer to the 'Register inversion requirement' section),
goto step 7
- 6a. send 0x47 PS/2 command to FSP;
+ a. send 0x47 PS/2 command to FSP;
- 6b. send the inverted register value to FSP and goto step 9;
+ b. send the inverted register value to FSP and goto step 9;
7. if the register value being to write is not required to be
swapped(refer to the 'Register swapping requirement' section),
goto step 8
- 7a. send 0x44 PS/2 command to FSP;
+ a. send 0x44 PS/2 command to FSP;
- 7b. send the swapped register value to FSP and goto step 9;
+ b. send the swapped register value to FSP and goto step 9;
8. send 0x33 PS/2 command to FSP;
- 8a. send the register value to FSP;
+ a. send the register value to FSP;
9. the register writing sequence is completed.
- * Note that since the Cx release, the hardware will return 1's
- complement of the register value at the 3rd byte of status request
- result. Host can optionally send another 0xe9 (status request) PS/2
- command to FSP at the end of register writing to verify that the
- register writing operation is successful (?? indicates don't care
- byte):
+ * Since the Cx release, the hardware will return 1's
+ complement of the register value at the 3rd byte of status request
+ result. Host can optionally send another 0xe9 (status request) PS/2
+ command to FSP at the end of register writing to verify that the
+ register writing operation is successful (?? indicates don't care
+ byte)::
host: 0xe9
3888: 0xfa (??) (~val) (val)
-==============================================================================
-* Programming Sequence for Page Register Reading/Writing
-==============================================================================
+Programming Sequence for Page Register Reading/Writing
+======================================================
- In order to overcome the limitation of maximum number of registers
+In order to overcome the limitation of maximum number of registers
supported, the hardware separates register into different groups called
'pages.' Each page is able to include up to 255 registers.
- The default page after power up is 0x82; therefore, if one has to get
+The default page after power up is 0x82; therefore, if one has to get
access to register 0x8301, one has to use following sequence to switch
to page 0x83, then start reading/writing from/to offset 0x01 by using
the register read/write sequence described in previous section.
@@ -632,6 +657,7 @@ Page register reading sequence:
8. the response read from FSP should be the requested page value.
+
Page register writing sequence:
1. send 0xf3 PS/2 command to FSP;
@@ -646,17 +672,17 @@ Page register writing sequence:
inverted(refer to the 'Register inversion requirement' section),
goto step 6
- 5a. send 0x47 PS/2 command to FSP;
+ a. send 0x47 PS/2 command to FSP;
- 5b. send the inverted page address to FSP and goto step 9;
+ b. send the inverted page address to FSP and goto step 9;
6. if the page address being written is not required to be
swapped(refer to the 'Register swapping requirement' section),
goto step 7
- 6a. send 0x44 PS/2 command to FSP;
+ a. send 0x44 PS/2 command to FSP;
- 6b. send the swapped page address to FSP and goto step 9;
+ b. send the swapped page address to FSP and goto step 9;
7. send 0x33 PS/2 command to FSP;
@@ -664,16 +690,17 @@ Page register writing sequence:
9. the page register writing sequence is completed.
-==============================================================================
-* Gesture ID
-==============================================================================
+Gesture ID
+==========
- Unlike other devices which sends multiple fingers' coordinates to host,
+Unlike other devices which sends multiple fingers' coordinates to host,
FSP processes multiple fingers' coordinates internally and convert them
into a 8 bits integer, namely 'Gesture ID.' Following is a list of
supported gesture IDs:
+ ======= ==================================
ID Description
+ ======= ==================================
0x86 2 finger straight up
0x82 2 finger straight down
0x80 2 finger straight right
@@ -687,38 +714,38 @@ supported gesture IDs:
0x28 3 finger straight right
0x2c 3 finger straight left
0x38 palm
+ ======= ==================================
-==============================================================================
-* Register Listing
-==============================================================================
+Register Listing
+================
- Registers are represented in 16 bits values. The higher 8 bits represent
+Registers are represented in 16 bits values. The higher 8 bits represent
the page address and the lower 8 bits represent the relative offset within
that particular page. Refer to the 'Programming Sequence for Page Register
Reading/Writing' section for instructions on how to change current page
-address.
+address::
-offset width default r/w name
-0x8200 bit7~bit0 0x01 RO device ID
+ offset width default r/w name
+ 0x8200 bit7~bit0 0x01 RO device ID
-0x8201 bit7~bit0 RW version ID
+ 0x8201 bit7~bit0 RW version ID
0xc1: STL3888 Ax
0xd0 ~ 0xd2: STL3888 Bx
0xe0 ~ 0xe1: STL3888 Cx
0xe2 ~ 0xe3: STL3888 Dx
-0x8202 bit7~bit0 0x01 RO vendor ID
+ 0x8202 bit7~bit0 0x01 RO vendor ID
-0x8203 bit7~bit0 0x01 RO product ID
+ 0x8203 bit7~bit0 0x01 RO product ID
-0x8204 bit3~bit0 0x01 RW revision ID
+ 0x8204 bit3~bit0 0x01 RW revision ID
-0x820b test mode status 1
+ 0x820b test mode status 1
bit3 1 RO 0: rotate 180 degree
1: no rotation
*only supported by H/W prior to Cx
-0x820f register file page control
+ 0x820f register file page control
bit2 0 RW 1: rotate 180 degree
0: no rotation
*supported since Cx
@@ -726,7 +753,7 @@ offset width default r/w name
bit0 0 RW 1 to enable page 1 register files
*only supported by H/W prior to Cx
-0x8210 RW system control 1
+ 0x8210 RW system control 1
bit0 1 RW Reserved, must be 1
bit1 0 RW Reserved, must be 0
bit4 0 RW Reserved, must be 0
@@ -737,7 +764,7 @@ offset width default r/w name
40 41 42 43. In addition to that, this bit must be 1 when gesture
mode is enabled)
-0x8220 test mode status
+ 0x8220 test mode status
bit5~bit4 RO number of buttons
11 => 2, lbtn/rbtn
10 => 4, lbtn/rbtn/scru/scrd
@@ -745,13 +772,13 @@ offset width default r/w name
00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn
*only supported by H/W prior to Cx
-0x8231 RW on-pad command detection
+ 0x8231 RW on-pad command detection
bit7 0 RW on-pad command left button down tag
enable
0: disable, 1: enable
*only supported by H/W prior to Cx
-0x8234 RW on-pad command control 5
+ 0x8234 RW on-pad command control 5
bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5
(Note that position unit is in 0.5 scanline)
*only supported by H/W prior to Cx
@@ -760,22 +787,22 @@ offset width default r/w name
0: disable, 1: enable
*only supported by H/W prior to Cx
-0x8235 RW on-pad command control 6
+ 0x8235 RW on-pad command control 6
bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5
(Note that position unit is in 0.5 scanline)
*only supported by H/W prior to Cx
-0x8236 RW on-pad command control 7
+ 0x8236 RW on-pad command control 7
bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5
(Note that position unit is in 0.5 scanline)
*only supported by H/W prior to Cx
-0x8237 RW on-pad command control 8
+ 0x8237 RW on-pad command control 8
bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5
(Note that position unit is in 0.5 scanline)
*only supported by H/W prior to Cx
-0x8240 RW system control 5
+ 0x8240 RW system control 5
bit1 0 RW FSP Intellimouse mode enable
0: disable, 1: enable
*only supported by H/W prior to Cx
@@ -813,7 +840,7 @@ offset width default r/w name
0: disable, 1: enable
*only supported by H/W prior to Cx
-0x8243 RW on-pad control
+ 0x8243 RW on-pad control
bit0 0 RW on-pad control enable
0: disable, 1: enable
(Note that if this bit is cleared, bit 3/5 will be ineffective)
@@ -827,7 +854,7 @@ offset width default r/w name
0: disable, 1: enable
*only supported by H/W prior to Cx
-0x8290 RW software control register 1
+ 0x8290 RW software control register 1
bit0 0 RW absolute coordination mode
0: disable, 1: enable
*supported since Cx
@@ -856,16 +883,17 @@ offset width default r/w name
*supported since Cx
bit7 0 RW Bx packet output compatible mode
- 0: disable, 1: enable *supported since Cx
+ 0: disable, 1: enable
+ *supported since Cx
*supported since Cx
-0x833d RW on-pad command control 1
+ 0x833d RW on-pad command control 1
bit7 1 RW on-pad command detection enable
0: disable, 1: enable
*supported since Cx
-0x833e RW on-pad command detection
+ 0x833e RW on-pad command detection
bit7 0 RW on-pad command left button down tag
enable. Works only in H/W based PS/2
data packet mode.