summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--.mailmap1
-rw-r--r--Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt17
-rw-r--r--Documentation/devicetree/bindings/regulator/fan53555.txt3
-rw-r--r--Documentation/devicetree/bindings/regulator/fixed-regulator.txt35
-rw-r--r--Documentation/devicetree/bindings/regulator/fixed-regulator.yaml67
-rw-r--r--Documentation/devicetree/bindings/regulator/max77650-regulator.txt41
-rw-r--r--Documentation/devicetree/bindings/regulator/pfuze100.txt2
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt68
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt38
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt6
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65218.txt9
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c1
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c2
-rw-r--r--arch/arm/mach-mmp/brownstone.c1
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c2
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c1
-rw-r--r--arch/arm/mach-pxa/em-x270.c1
-rw-r--r--arch/arm/mach-pxa/ezx.c3
-rw-r--r--arch/arm/mach-pxa/hx4700.c23
-rw-r--r--arch/arm/mach-pxa/magician.c23
-rw-r--r--arch/arm/mach-pxa/raumfeld.c1
-rw-r--r--arch/arm/mach-pxa/zeus.c3
-rw-r--r--arch/arm/mach-sa1100/assabet.c1
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c2
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c1
-rw-r--r--drivers/regulator/88pm8607.c38
-rw-r--r--drivers/regulator/Kconfig27
-rw-r--r--drivers/regulator/Makefile2
-rw-r--r--drivers/regulator/act8865-regulator.c5
-rw-r--r--drivers/regulator/act8945a-regulator.c11
-rw-r--r--drivers/regulator/arizona-ldo1.c56
-rw-r--r--drivers/regulator/as3722-regulator.c2
-rw-r--r--drivers/regulator/axp20x-regulator.c27
-rw-r--r--drivers/regulator/bcm590xx-regulator.c4
-rw-r--r--drivers/regulator/bd70528-regulator.c289
-rw-r--r--drivers/regulator/bd718x7-regulator.c215
-rw-r--r--drivers/regulator/bd9571mwv-regulator.c8
-rw-r--r--drivers/regulator/core.c88
-rw-r--r--drivers/regulator/cpcap-regulator.c106
-rw-r--r--drivers/regulator/da9052-regulator.c64
-rw-r--r--drivers/regulator/da9055-regulator.c46
-rw-r--r--drivers/regulator/da9062-regulator.c37
-rw-r--r--drivers/regulator/da9063-regulator.c37
-rw-r--r--drivers/regulator/da9210-regulator.c53
-rw-r--r--drivers/regulator/fan53555.c109
-rw-r--r--drivers/regulator/fixed.c35
-rw-r--r--drivers/regulator/gpio-regulator.c194
-rw-r--r--drivers/regulator/helpers.c125
-rw-r--r--drivers/regulator/hi655x-regulator.c1
-rw-r--r--drivers/regulator/isl6271a-regulator.c13
-rw-r--r--drivers/regulator/lm363x-regulator.c6
-rw-r--r--drivers/regulator/lochnagar-regulator.c7
-rw-r--r--drivers/regulator/lp3971.c4
-rw-r--r--drivers/regulator/lp3972.c4
-rw-r--r--drivers/regulator/lp872x.c82
-rw-r--r--drivers/regulator/lp873x-regulator.c51
-rw-r--r--drivers/regulator/lp8755.c6
-rw-r--r--drivers/regulator/lp87565-regulator.c4
-rw-r--r--drivers/regulator/lp8788-buck.c40
-rw-r--r--drivers/regulator/lp8788-ldo.c4
-rw-r--r--drivers/regulator/ltc3676.c65
-rw-r--r--drivers/regulator/max14577-regulator.c1
-rw-r--r--drivers/regulator/max77620-regulator.c12
-rw-r--r--drivers/regulator/max77650-regulator.c498
-rw-r--r--drivers/regulator/max77802-regulator.c6
-rw-r--r--drivers/regulator/mc13783-regulator.c82
-rw-r--r--drivers/regulator/mc13892-regulator.c72
-rw-r--r--drivers/regulator/mc13xxx-regulator-core.c4
-rw-r--r--drivers/regulator/mc13xxx.h24
-rw-r--r--drivers/regulator/mcp16502.c2
-rw-r--r--drivers/regulator/mt6311-regulator.c10
-rw-r--r--drivers/regulator/of_regulator.c4
-rw-r--r--drivers/regulator/palmas-regulator.c2
-rw-r--r--drivers/regulator/pv88060-regulator.c62
-rw-r--r--drivers/regulator/pv88080-regulator.c55
-rw-r--r--drivers/regulator/pv88090-regulator.c53
-rw-r--r--drivers/regulator/pwm-regulator.c17
-rw-r--r--drivers/regulator/qcom_smd-regulator.c104
-rw-r--r--drivers/regulator/rk808-regulator.c64
-rw-r--r--drivers/regulator/rt5033-regulator.c4
-rw-r--r--drivers/regulator/s2mpa01.c10
-rw-r--r--drivers/regulator/s2mps11.c6
-rw-r--r--drivers/regulator/s5m8767.c8
-rw-r--r--drivers/regulator/stm32-vrefbuf.c121
-rw-r--r--drivers/regulator/stpmic1_regulator.c300
-rw-r--r--drivers/regulator/tps65218-regulator.c23
-rw-r--r--drivers/regulator/twl-regulator.c7
-rw-r--r--drivers/regulator/twl6030-regulator.c88
-rw-r--r--drivers/regulator/uniphier-regulator.c8
-rw-r--r--drivers/regulator/wm831x-dcdc.c85
-rw-r--r--include/linux/mfd/tps65218.h3
-rw-r--r--include/linux/regulator/driver.h30
-rw-r--r--include/linux/regulator/fixed.h10
-rw-r--r--include/linux/regulator/gpio-regulator.h18
94 files changed, 2489 insertions, 1521 deletions
diff --git a/.mailmap b/.mailmap
index ea98fcc197e4..37e1847c7988 100644
--- a/.mailmap
+++ b/.mailmap
@@ -123,6 +123,7 @@ Mark Brown <broonie@sirena.org.uk>
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
+Mathieu Othacehe <m.othacehe@gmail.com>
Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
Matthew Wilcox <willy@infradead.org> <mawilcox@linuxonhyperv.com>
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
index a4b056761eaa..d5f68ac78d15 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
@@ -23,6 +23,20 @@ Required properties:
Optional properties:
- clock-output-names : Should contain name for output clock.
+- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset.
+
+The BD718x7 supports two different HW states as reset target states. States
+are called as SNVS and READY. At READY state all the PMIC power outputs go
+down and OTP is reload. At the SNVS state all other logic and external
+devices apart from the SNVS power domain are shut off. Please refer to NXP
+i.MX8 documentation for further information regarding SNVS state. When a
+reset is done via SNVS state the PMIC OTP data is not reload. This causes
+power outputs that have been under SW control to stay down when reset has
+switched power state to SNVS. If reset is done via READY state the power
+outputs will be returned to HW control by OTP loading. Thus the reset
+target state is set to READY by default. If SNVS state is used the boot
+crucial regulators must have the regulator-always-on and regulator-boot-on
+properties set in regulator node.
Example:
@@ -43,6 +57,7 @@ Example:
#clock-cells = <0>;
clocks = <&osc 0>;
clock-output-names = "bd71837-32k-out";
+ rohm,reset-snvs-powered;
regulators {
buck1: BUCK1 {
@@ -50,8 +65,10 @@ Example:
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ regulator-always-on;
regulator-ramp-delay = <1250>;
};
+ // [...]
};
};
diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
index 54a3f2c80e3a..e7fc045281d1 100644
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -1,7 +1,8 @@
Binding for Fairchild FAN53555 regulators
Required properties:
- - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828"
+ - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
+ "silergy,syr828"
- reg: I2C address
Optional properties:
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
deleted file mode 100644
index 0c2a6c8a1536..000000000000
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Fixed Voltage regulators
-
-Required properties:
-- compatible: Must be "regulator-fixed";
-- regulator-name: Defined in regulator.txt as optional, but required here.
-
-Optional properties:
-- gpio: gpio to use for enable control
-- startup-delay-us: startup time in microseconds
-- enable-active-high: Polarity of GPIO is Active high
-If this property is missing, the default assumed is Active low.
-- gpio-open-drain: GPIO is open drain type.
- If this property is missing then default assumption is false.
--vin-supply: Input supply name.
-
-Any property defined as part of the core regulator
-binding, defined in regulator.txt, can also be used.
-However a fixed voltage regulator is expected to have the
-regulator-min-microvolt and regulator-max-microvolt
-to be the same.
-
-Example:
-
- abc: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-supply";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 16 0>;
- startup-delay-us = <70000>;
- enable-active-high;
- regulator-boot-on;
- gpio-open-drain;
- vin-supply = <&parent_reg>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
new file mode 100644
index 000000000000..d289c2f7455a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed Voltage regulators
+
+maintainers:
+ - Liam Girdwood <lgirdwood@gmail.com>
+ - Mark Brown <broonie@kernel.org>
+
+description:
+ Any property defined as part of the core regulator binding, defined in
+ regulator.txt, can also be used. However a fixed voltage regulator is
+ expected to have the regulator-min-microvolt and regulator-max-microvolt
+ to be the same.
+
+properties:
+ compatible:
+ const: regulator-fixed
+
+ regulator-name: true
+
+ gpio:
+ description: gpio to use for enable control
+ maxItems: 1
+
+ startup-delay-us:
+ description: startup time in microseconds
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ enable-active-high:
+ description:
+ Polarity of GPIO is Active high. If this property is missing,
+ the default assumed is Active low.
+ type: boolean
+
+ gpio-open-drain:
+ description:
+ GPIO is open drain type. If this property is missing then default
+ assumption is false.
+ type: boolean
+
+ vin-supply:
+ description: Input supply phandle.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - regulator-name
+
+examples:
+ - |
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 16 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio-open-drain;
+ vin-supply = <&parent_reg>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt
new file mode 100644
index 000000000000..f1cbe813c30f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt
@@ -0,0 +1,41 @@
+Regulator driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The regulator controller is represented as a sub-node of the PMIC node
+on the device tree.
+
+The device has a single LDO regulator and a SIMO buck-boost regulator with
+three independent power rails.
+
+Required properties:
+--------------------
+- compatible: Must be "maxim,max77650-regulator"
+
+Each rail must be instantiated under the regulators subnode of the top PMIC
+node. Up to four regulators can be defined. For standard regulator properties
+refer to Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2".
+
+Example:
+--------
+
+ regulators {
+ compatible = "maxim,max77650-regulator";
+
+ max77650_ldo: regulator@0 {
+ regulator-compatible = "ldo";
+ regulator-name = "max77650-ldo";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <2937500>;
+ };
+
+ max77650_sbb0: regulator@1 {
+ regulator-compatible = "sbb0";
+ regulator-name = "max77650-sbb0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1587500>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index f9be1acf891c..4d3b12b92cb3 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -8,7 +8,7 @@ Optional properties:
- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch
regulators to save power consumption. Attention, ensure that all important
regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
- property. If not present, the switched regualtors are always on and can't be
+ property. If not present, the switched regulators are always on and can't be
disabled. This binding is a workaround to keep backward compatibility with
old dtb's which rely on the fact that the switched regulators are always on
and don't mark them explicit as "regulator-always-on".
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
new file mode 100644
index 000000000000..698cfc3bc3dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
@@ -0,0 +1,68 @@
+ROHM BD70528 Power Management Integrated Circuit regulator bindings
+
+Required properties:
+ - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
+ "led_ldo1", "led_ldo2"
+
+List of regulators provided by this controller. BD70528 regulators node
+should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at
+Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+
+The valid names for BD70528 regulator nodes are:
+BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+regulators {
+ buck1: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <125>;
+ };
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <125>;
+ };
+ buck3: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <250>;
+ };
+ ldo1: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ ldo2: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ led_ldo1: LED_LDO1 {
+ regulator-name = "led_ldo1";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <300000>;
+ };
+ led_ldo2: LED_LDO2 {
+ regulator-name = "led_ldo2";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <300000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
index 4b98ca26e61a..cbce62c22b60 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
@@ -27,8 +27,38 @@ BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
Optional properties:
+- rohm,dvs-run-voltage : PMIC default "RUN" state voltage in uV.
+ See below table for bucks which support this.
+- rohm,dvs-idle-voltage : PMIC default "IDLE" state voltage in uV.
+ See below table for bucks which support this.
+- rohm,dvs-suspend-voltage : PMIC default "SUSPEND" state voltage in uV.
+ See below table for bucks which support this.
- Any optional property defined in bindings/regulator/regulator.txt
+Supported default DVS states:
+
+BD71837:
+buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+-----------------------------------------------------------------------------
+1 | supported | supported | supported
+----------------------------------------------------------------------------
+2 | supported | supported | not supported
+----------------------------------------------------------------------------
+3 | supported | not supported | not supported
+----------------------------------------------------------------------------
+4 | supported | not supported | not supported
+----------------------------------------------------------------------------
+rest | not supported | not supported | not supported
+
+BD71847:
+buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+-----------------------------------------------------------------------------
+1 | supported | supported | supported
+----------------------------------------------------------------------------
+2 | supported | supported | not supported
+----------------------------------------------------------------------------
+rest | not supported | not supported | not supported
+
Example:
regulators {
buck1: BUCK1 {
@@ -36,7 +66,11 @@ regulators {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ regulator-always-on;
regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <900000>;
+ rohm,dvs-idle-voltage = <850000>;
+ rohm,dvs-suspend-voltage = <800000>;
};
buck2: BUCK2 {
regulator-name = "buck2";
@@ -45,18 +79,22 @@ regulators {
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
};
buck3: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ rohm,dvs-run-voltage = <1000000>;
};
buck4: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ rohm,dvs-run-voltage = <1000000>;
};
buck5: BUCK5 {
regulator-name = "buck5";
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
index a3f476240565..6189df71ea98 100644
--- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
@@ -23,16 +23,14 @@ Switches are fixed voltage regulators with only enable/disable capability.
Optional properties:
- st,mask-reset: mask reset for this regulator: the regulator configuration
is maintained during pmic reset.
-- regulator-pull-down: enable high pull down
- if not specified light pull down is used
- regulator-over-current-protection:
if set, all regulators are switched off in case of over-current detection
on this regulator,
if not set, the driver only sends an over-current event.
-- interrupt-parent: phandle to the parent interrupt controller
- interrupts: index of current limit detection interrupt
- <regulator>-supply: phandle to the parent supply/regulator node
each regulator supply can be described except vref_ddr.
+- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2.
Example:
regulators {
@@ -43,7 +41,6 @@ regulators {
vdd_core: buck1 {
regulator-name = "vdd_core";
interrupts = <IT_CURLIM_BUCK1 0>;
- interrupt-parent = <&pmic>;
st,mask-reset;
regulator-pull-down;
regulator-min-microvolt = <700000>;
@@ -53,7 +50,6 @@ regulators {
v3v3: buck4 {
regulator-name = "v3v3";
interrupts = <IT_CURLIM_BUCK4 0>;
- interrupt-parent = <&mypmic>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
index 02f0e9bbfbf8..54aded3b78e2 100644
--- a/Documentation/devicetree/bindings/regulator/tps65218.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -71,8 +71,13 @@ tps65218: tps65218@24 {
regulator-always-on;
};
+ ls2: regulator-ls2 {
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <1000000>;
+ };
+
ls3: regulator-ls3 {
- regulator-min-microvolt = <100000>;
- regulator-max-microvolt = <1000000>;
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <1000000>;
};
};
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 2e1e540f2e5a..d278fb672d40 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -205,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
.supply_name = "LCD",
.microvolts = 3300000,
- .enable_high = 1,
.init_data = &mx21ads_lcd_regulator_init_data,
};
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index f5e04047ed13..6dd7f57c332f 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -237,7 +237,7 @@ static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
.table = {
- GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_LOW),
{ },
},
};
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index a04e249c654b..d2560fb1e835 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -149,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = {
static struct fixed_voltage_config brownstone_v_5vp = {
.supply_name = "v_5vp",
.microvolts = 5000000,
- .enable_high = 1,
.enabled_at_boot = 1,
.init_data = &brownstone_v_5vp_data,
};
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index c4c0a8ea11e4..be30c3c061b4 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -267,7 +267,6 @@ static struct fixed_voltage_config modem_nreset_config = {
.supply_name = "modem_nreset",
.microvolts = 3300000,
.startup_delay = 25000,
- .enable_high = 1,
.enabled_at_boot = 1,
.init_data = &modem_nreset_data,
};
@@ -533,7 +532,6 @@ static struct regulator_init_data keybrd_pwr_initdata = {
static struct fixed_voltage_config keybrd_pwr_config = {
.supply_name = "keybrd_pwr",
.microvolts = 5000000,
- .enable_high = 1,
.init_data = &keybrd_pwr_initdata,
};
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 8a5b6ed4ec36..a2ecc5e69abb 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -330,7 +330,6 @@ static struct fixed_voltage_config pandora_vwlan = {
.supply_name = "vwlan",
.microvolts = 1800000, /* 1.8V */
.startup_delay = 50000, /* 50ms */
- .enable_high = 1,
.init_data = &pandora_vmmc3,
};
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 32c1edeb3f14..5ba7bb7f7d51 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -976,7 +976,6 @@ static struct fixed_voltage_config camera_dummy_config = {
.supply_name = "camera_vdd",
.input_supply = "vcc cam",
.microvolts = 2800000,
- .enable_high = 0,
.init_data = &camera_dummy_initdata,
};
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 565965e9acc7..5e110e70ce5a 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -714,7 +714,6 @@ static struct regulator_init_data camera_regulator_initdata = {
static struct fixed_voltage_config camera_regulator_config = {
.supply_name = "camera_vdd",
.microvolts = 2800000,
- .enable_high = 0,
.init_data = &camera_regulator_initdata,
};
@@ -730,7 +729,7 @@ static struct gpiod_lookup_table camera_supply_gpiod_table = {
.dev_id = "reg-fixed-voltage.1",
.table = {
GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
- NULL, GPIO_ACTIVE_HIGH),
+ NULL, GPIO_ACTIVE_LOW),
{ },
},
};
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b79b757fdd41..51d38d5e776a 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/fb.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
@@ -702,9 +703,7 @@ static struct regulator_init_data bq24022_init_data = {
.consumer_supplies = bq24022_consumers,
};
-static struct gpio bq24022_gpios[] = {
- { GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
+static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
static struct gpio_regulator_state bq24022_states[] = {
{ .value = 100000, .gpios = (0 << 0) },
@@ -714,12 +713,10 @@ static struct gpio_regulator_state bq24022_states[] = {
static struct gpio_regulator_config bq24022_info = {
.supply_name = "bq24022",
- .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
- .enable_high = 0,
.enabled_at_boot = 0,
- .gpios = bq24022_gpios,
- .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+ .gflags = bq24022_gpiod_gflags,
+ .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
.states = bq24022_states,
.nr_states = ARRAY_SIZE(bq24022_states),
@@ -736,6 +733,17 @@ static struct platform_device bq24022 = {
},
};
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+ .dev_id = "gpio-regulator",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
+ NULL, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
+ "enable", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/*
* StrataFlash
*/
@@ -878,6 +886,7 @@ static void __init hx4700_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ gpiod_add_lookup_table(&bq24022_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 08b079653c3f..6538a7c0e504 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -645,9 +645,8 @@ static struct regulator_init_data bq24022_init_data = {
.consumer_supplies = bq24022_consumers,
};
-static struct gpio bq24022_gpios[] = {
- { EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
+
+static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
static struct gpio_regulator_state bq24022_states[] = {
{ .value = 100000, .gpios = (0 << 0) },
@@ -657,12 +656,10 @@ static struct gpio_regulator_state bq24022_states[] = {
static struct gpio_regulator_config bq24022_info = {
.supply_name = "bq24022",
- .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
- .enable_high = 0,
.enabled_at_boot = 1,
- .gpios = bq24022_gpios,
- .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+ .gflags = bq24022_gpiod_gflags,
+ .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
.states = bq24022_states,
.nr_states = ARRAY_SIZE(bq24022_states),
@@ -679,6 +676,17 @@ static struct platform_device bq24022 = {
},
};
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+ .dev_id = "gpio-regulator",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
+ NULL, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ "enable", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/*
* fixed regulator for ads7846
*/
@@ -1027,6 +1035,7 @@ static void __init magician_init(void)
regulator_register_always_on(0, "power", pwm_backlight_supply,
ARRAY_SIZE(pwm_backlight_supply), 5000000);
+ gpiod_add_lookup_table(&bq24022_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index e1db072756f2..e13bfc9b01d2 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -883,7 +883,6 @@ static struct regulator_init_data audio_va_initdata = {
static struct fixed_voltage_config audio_va_config = {
.supply_name = "audio_va",
.microvolts = 5000000,
- .enable_high = 1,
.enabled_at_boot = 0,
.init_data = &audio_va_initdata,
};
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index c411f79d4cb5..ebd654302387 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -426,7 +426,7 @@ static struct gpiod_lookup_table can_regulator_gpiod_table = {
.dev_id = "reg-fixed-voltage.0",
.table = {
GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
- NULL, GPIO_ACTIVE_HIGH),
+ NULL, GPIO_ACTIVE_LOW),
{ },
},
};
@@ -547,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = {
static struct fixed_voltage_config zeus_ohci_regulator_config = {
.supply_name = "vbus2",
.microvolts = 5000000, /* 5.0V */
- .enable_high = 1,
.startup_delay = 0,
.init_data = &zeus_ohci_regulator_data,
};
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index dfa42496ec27..d09c3f236186 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -469,7 +469,6 @@ static struct regulator_consumer_supply assabet_cf_vcc_consumers[] = {
static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = {
.supply_name = "cf-power",
.microvolts = 3300000,
- .enable_high = 1,
};
static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = {
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 22b4106b8084..5495efa07335 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -630,7 +630,6 @@ static struct regulator_init_data cn12_power_init_data = {
static struct fixed_voltage_config cn12_power_info = {
.supply_name = "CN12 SD/MMC Vdd",
.microvolts = 3300000,
- .enable_high = 1,
.init_data = &cn12_power_init_data,
};
@@ -671,7 +670,6 @@ static struct regulator_init_data sdhi0_power_init_data = {
static struct fixed_voltage_config sdhi0_power_info = {
.supply_name = "CN11 SD/MMC Vdd",
.microvolts = 3300000,
- .enable_high = 1,
.init_data = &sdhi0_power_init_data,
};
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
index 96f438d4b026..1421d5330b2c 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
@@ -44,7 +44,6 @@ static struct fixed_voltage_config bcm43xx_vmmc = {
*/
.microvolts = 2000000, /* 1.8V */
.startup_delay = 250 * 1000, /* 250ms */
- .enable_high = 1, /* active high */
.enabled_at_boot = 0, /* disabled at boot */
.init_data = &bcm43xx_vmmc_data,
};
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 28f55248eb90..753a6a1b30c3 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/platform_device.h>
@@ -22,12 +21,7 @@
struct pm8607_regulator_info {
struct regulator_desc desc;
- struct pm860x_chip *chip;
- struct regulator_dev *regulator;
- struct i2c_client *i2c;
- struct i2c_client *i2c_8606;
- unsigned int *vol_table;
unsigned int *vol_suspend;
int slope_double;
@@ -210,13 +204,15 @@ static const unsigned int LDO14_suspend_table[] = {
static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
{
struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
- int ret = -EINVAL;
+ int ret;
+
+ ret = regulator_list_voltage_table(rdev, index);
+ if (ret < 0)
+ return ret;
+
+ if (info->slope_double)
+ ret <<= 1;
- if (info->vol_table && (index < rdev->desc->n_voltages)) {
- ret = info->vol_table[index];
- if (info->slope_double)
- ret <<= 1;
- }
return ret;
}
@@ -257,6 +253,7 @@ static const struct regulator_ops pm8606_preg_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PM8607_ID_##vreg, \
.owner = THIS_MODULE, \
+ .volt_table = vreg##_table, \
.n_voltages = ARRAY_SIZE(vreg##_table), \
.vsel_reg = PM8607_##vreg, \
.vsel_mask = ARRAY_SIZE(vreg##_table) - 1, \
@@ -266,7 +263,6 @@ static const struct regulator_ops pm8606_preg_ops = {
.enable_mask = 1 << (ebit), \
}, \
.slope_double = (0), \
- .vol_table = (unsigned int *)&vreg##_table, \
.vol_suspend = (unsigned int *)&vreg##_suspend_table, \
}
@@ -278,6 +274,7 @@ static const struct regulator_ops pm8606_preg_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PM8607_ID_LDO##_id, \
.owner = THIS_MODULE, \
+ .volt_table = LDO##_id##_table, \
.n_voltages = ARRAY_SIZE(LDO##_id##_table), \
.vsel_reg = PM8607_##vreg, \
.vsel_mask = (ARRAY_SIZE(LDO##_id##_table) - 1) << (shift), \
@@ -285,7 +282,6 @@ static const struct regulator_ops pm8606_preg_ops = {
.enable_mask = 1 << (ebit), \
}, \
.slope_double = (0), \
- .vol_table = (unsigned int *)&LDO##_id##_table, \
.vol_suspend = (unsigned int *)&LDO##_id##_suspend_table, \
}
@@ -349,6 +345,7 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
struct pm8607_regulator_info *info = NULL;
struct regulator_init_data *pdata = dev_get_platdata(&pdev->dev);
struct regulator_config config = { };
+ struct regulator_dev *rdev;
struct resource *res;
int i;
@@ -371,13 +368,9 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
/* i is used to check regulator ID */
i = -1;
}
- info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
- info->i2c_8606 = (chip->id == CHIP_PM8607) ? chip->companion :
- chip->client;
- info->chip = chip;
/* check DVC ramp slope double */
- if ((i == PM8607_ID_BUCK3) && info->chip->buck3_double)
+ if ((i == PM8607_ID_BUCK3) && chip->buck3_double)
info->slope_double = 1;
config.dev = &pdev->dev;
@@ -392,12 +385,11 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
else
config.regmap = chip->regmap_companion;
- info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
- &config);
- if (IS_ERR(info->regulator)) {
+ rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
+ if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
- return PTR_ERR(info->regulator);
+ return PTR_ERR(rdev);
}
platform_set_drvdata(pdev, info);
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ee60a222f5eb..b7f249ee5e68 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -180,6 +180,17 @@ config REGULATOR_BCM590XX
BCM590xx PMUs. This will enable support for the software
controllable LDO/Switching regulators.
+config REGULATOR_BD70528
+ tristate "ROHM BD70528 Power Regulator"
+ depends on MFD_ROHM_BD70528
+ help
+ This driver supports voltage regulators on ROHM BD70528 PMIC.
+ This will enable support for the software controllable buck
+ and LDO regulators.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd70528-regulator.
+
config REGULATOR_BD718XX
tristate "ROHM BD71837 Power Regulator"
depends on MFD_ROHM_BD718XX
@@ -457,6 +468,14 @@ config REGULATOR_MAX77620
chip to control Step-Down DC-DC and LDOs. Say Y here to
enable the regulator driver.
+config REGULATOR_MAX77650
+ tristate "Maxim MAX77650/77651 regulator support"
+ depends on MFD_MAX77650
+ help
+ Regulator driver for MAX77650/77651 PMIC from Maxim
+ Semiconductor. This device has a SIMO with three independent
+ power rails and an LDO.
+
config REGULATOR_MAX8649
tristate "Maxim 8649 voltage regulator"
depends on I2C
@@ -484,7 +503,7 @@ config REGULATOR_MAX8925
tristate "Maxim MAX8925 Power Management IC"
depends on MFD_MAX8925
help
- Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
+ Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
config REGULATOR_MAX8952
tristate "Maxim MAX8952 Power Management IC"
@@ -501,7 +520,7 @@ config REGULATOR_MAX8973
select REGMAP_I2C
help
The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
- switching regulator delievers up to 9A of output current. Each
+ switching regulator delivers up to 9A of output current. Each
phase operates at a 2MHz fixed frequency with a 120 deg shift
from the adjacent phase, allowing the use of small magnetic component.
@@ -646,7 +665,7 @@ config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
depends on MFD_PCF50633
help
- Say Y here to support the voltage regulators and convertors
+ Say Y here to support the voltage regulators and converters
on PCF50633
config REGULATOR_PFUZE100
@@ -924,7 +943,7 @@ config REGULATOR_TPS65132
select REGMAP_I2C
help
This driver supports TPS65132 single inductor - dual output
- power supply specifcally designed for display panels.
+ power supply specifically designed for display panels.
config REGULATOR_TPS65217
tristate "TI TPS65217 Power regulators"
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b12e1c9b2118..1169f8a27d91 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
+obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
@@ -60,6 +61,7 @@ obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
+obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 21e20483bd91..e0239cf3f56d 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -131,7 +131,7 @@
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
-#define ACT8600_SUDCDC_VOLTAGE_NUM 255
+#define ACT8600_SUDCDC_VOLTAGE_NUM 256
struct act8865 {
struct regmap *regmap;
@@ -222,7 +222,8 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
- REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
+ REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
+ REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};
static struct regulator_ops act8865_ops = {
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 603db77723b6..caa61d306a69 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -87,7 +87,8 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
{
struct regmap *regmap = rdev->regmap;
- int id = rdev->desc->id, reg, val;
+ int id = rdev_get_id(rdev);
+ int reg, val;
switch (id) {
case ACT8945A_ID_DCDC1:
@@ -159,7 +160,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
struct regmap *regmap = rdev->regmap;
- int id = rdev->desc->id;
+ int id = rdev_get_id(rdev);
int reg, ret, val = 0;
switch (id) {
@@ -190,11 +191,11 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
switch (mode) {
case REGULATOR_MODE_STANDBY:
- if (rdev->desc->id > ACT8945A_ID_DCDC3)
+ if (id > ACT8945A_ID_DCDC3)
val = BIT(5);
break;
case REGULATOR_MODE_NORMAL:
- if (rdev->desc->id <= ACT8945A_ID_DCDC3)
+ if (id <= ACT8945A_ID_DCDC3)
val = BIT(5);
break;
default:
@@ -213,7 +214,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
{
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
- int id = rdev->desc->id;
+ int id = rdev_get_id(rdev);
if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX)
return -EINVAL;
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index b9a93049e41e..bf3ab405eed1 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -40,35 +40,10 @@ struct arizona_ldo1 {
struct gpio_desc *ena_gpiod;
};
-static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- if (selector >= rdev->desc->n_voltages)
- return -EINVAL;
-
- if (selector == rdev->desc->n_voltages - 1)
- return 1800000;
- else
- return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
-}
-
-static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- int sel;
-
- sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
- if (sel >= rdev->desc->n_voltages)
- sel = rdev->desc->n_voltages - 1;
-
- return sel;
-}
-
static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
- struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
- struct regmap *regmap = ldo->regmap;
+ struct regmap *regmap = rdev_get_regmap(rdev);
unsigned int val;
int ret;
@@ -85,16 +60,12 @@ static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
if (val)
return 0;
- val = sel << ARIZONA_LDO1_VSEL_SHIFT;
-
- return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
- ARIZONA_LDO1_VSEL_MASK, val);
+ return regulator_set_voltage_sel_regmap(rdev, sel);
}
static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
{
- struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
- struct regmap *regmap = ldo->regmap;
+ struct regmap *regmap = rdev_get_regmap(rdev);
unsigned int val;
int ret;
@@ -105,32 +76,35 @@ static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
if (val & ARIZONA_LDO1_HI_PWR)
return rdev->desc->n_voltages - 1;
- ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
- if (ret != 0)
- return ret;
-
- return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
+ return regulator_get_voltage_sel_regmap(rdev);
}
static const struct regulator_ops arizona_ldo1_hc_ops = {
- .list_voltage = arizona_ldo1_hc_list_voltage,
- .map_voltage = arizona_ldo1_hc_map_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
};
+static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000),
+ REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0),
+};
+
static const struct regulator_desc arizona_ldo1_hc = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_hc_ops,
+ .vsel_reg = ARIZONA_LDO1_CONTROL_1,
+ .vsel_mask = ARIZONA_LDO1_VSEL_MASK,
.bypass_reg = ARIZONA_LDO1_CONTROL_1,
.bypass_mask = ARIZONA_LDO1_BYPASS,
- .min_uV = 900000,
- .uV_step = 50000,
+ .linear_ranges = arizona_ldo1_hc_ranges,
+ .n_linear_ranges = ARRAY_SIZE(arizona_ldo1_hc_ranges),
.n_voltages = 8,
.enable_time = 1500,
.ramp_delay = 24000,
diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c
index 66337e12719b..e5fed289b52d 100644
--- a/drivers/regulator/as3722-regulator.c
+++ b/drivers/regulator/as3722-regulator.c
@@ -886,7 +886,7 @@ static int as3722_regulator_probe(struct platform_device *pdev)
as3722_regs->desc[id].min_uV = 410000;
} else {
as3722_regs->desc[id].n_voltages =
- AS3722_SD0_VSEL_MAX + 1,
+ AS3722_SD0_VSEL_MAX + 1;
as3722_regs->desc[id].min_uV = 610000;
}
as3722_regs->desc[id].uV_step = 10000;
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 48af859fd053..fba8f58ab769 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -367,13 +367,12 @@ static const int axp209_dcdc2_ldo3_slew_rates[] = {
static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
- const struct regulator_desc *desc = rdev->desc;
+ const struct regulator_desc *desc;
u8 reg, mask, enable, cfg = 0xff;
const int *slew_rates;
int rate_count = 0;
- if (!rdev)
- return -EINVAL;
+ desc = rdev->desc;
switch (axp20x->variant) {
case AXP209_ID:
@@ -436,11 +435,13 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
static int axp20x_regulator_enable_regmap(struct regulator_dev *rdev)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
- const struct regulator_desc *desc = rdev->desc;
+ const struct regulator_desc *desc;
if (!rdev)
return -EINVAL;
+ desc = rdev->desc;
+
switch (axp20x->variant) {
case AXP209_ID:
if ((desc->id == AXP20X_LDO3) &&
@@ -573,7 +574,7 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP22X_DCDC3_V_OUT, AXP22X_DCDC3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC3_MASK),
AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
- AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT,
+ AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC4_MASK),
AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
AXP22X_DCDC5_V_OUT, AXP22X_DCDC5_V_OUT_MASK,
@@ -719,7 +720,7 @@ static const struct regulator_desc axp803_regulators[] = {
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
- AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT,
+ AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
@@ -729,7 +730,7 @@ static const struct regulator_desc axp803_regulators[] = {
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
- AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT,
+ AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
@@ -744,7 +745,7 @@ static const struct regulator_desc axp803_regulators[] = {
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
- AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT,
+ AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
AXP803_FLDO1_V_OUT, AXP803_FLDO1_V_OUT_MASK,
@@ -791,7 +792,7 @@ static const struct regulator_desc axp806_regulators[] = {
AXP806_DCDCA_V_CTRL, AXP806_DCDCA_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCA_MASK),
AXP_DESC(AXP806, DCDCB, "dcdcb", "vinb", 1000, 2550, 50,
- AXP806_DCDCB_V_CTRL, AXP806_DCDCB_V_CTRL,
+ AXP806_DCDCB_V_CTRL, AXP806_DCDCB_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCB_MASK),
AXP_DESC_RANGES(AXP806, DCDCC, "dcdcc", "vinc",
axp806_dcdca_ranges, AXP806_DCDCA_NUM_VOLTAGES,
@@ -817,7 +818,7 @@ static const struct regulator_desc axp806_regulators[] = {
AXP806_BLDO1_V_CTRL, AXP806_BLDO1_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO1_MASK),
AXP_DESC(AXP806, BLDO2, "bldo2", "bldoin", 700, 1900, 100,
- AXP806_BLDO2_V_CTRL, AXP806_BLDO2_V_CTRL,
+ AXP806_BLDO2_V_CTRL, AXP806_BLDO2_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO2_MASK),
AXP_DESC(AXP806, BLDO3, "bldo3", "bldoin", 700, 1900, 100,
AXP806_BLDO3_V_CTRL, AXP806_BLDO3_V_CTRL_MASK,
@@ -952,7 +953,7 @@ static const struct regulator_desc axp813_regulators[] = {
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
- AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT,
+ AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
@@ -962,7 +963,7 @@ static const struct regulator_desc axp813_regulators[] = {
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
- AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT,
+ AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
@@ -977,7 +978,7 @@ static const struct regulator_desc axp813_regulators[] = {
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
- AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT,
+ AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
/* to do / check ... */
AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c
index 92d6d7b10cf7..e49c0a7d5dd5 100644
--- a/drivers/regulator/bcm590xx-regulator.c
+++ b/drivers/regulator/bcm590xx-regulator.c
@@ -242,8 +242,12 @@ static int bcm590xx_get_enable_register(int id)
case BCM590XX_REG_SDSR2:
reg = BCM590XX_SDSR2PMCTRL1;
break;
+ case BCM590XX_REG_VSR:
+ reg = BCM590XX_VSRPMCTRL1;
+ break;
case BCM590XX_REG_VBUS:
reg = BCM590XX_OTG_CTRL;
+ break;
}
diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
new file mode 100644
index 000000000000..30e3ed430a8a
--- /dev/null
+++ b/drivers/regulator/bd70528-regulator.c
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// bd70528-regulator.c ROHM BD70528MWV regulator driver
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+#define BUCK_RAMPRATE_250MV 0
+#define BUCK_RAMPRATE_125MV 1
+#define BUCK_RAMP_MAX 250
+
+static const struct regulator_linear_range bd70528_buck1_volts[] = {
+ REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
+ REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
+};
+static const struct regulator_linear_range bd70528_buck2_volts[] = {
+ REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000),
+ REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000),
+ REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000),
+};
+static const struct regulator_linear_range bd70528_buck3_volts[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000),
+ REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0),
+};
+
+/* All LDOs have same voltage ranges */
+static const struct regulator_linear_range bd70528_ldo_volts[] = {
+ REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000),
+ REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000),
+ REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000),
+ REGULATOR_LINEAR_RANGE(3300000, 0x19, 0x1f, 0),
+};
+
+/* Also both LEDs support same voltages */
+static const unsigned int led_volts[] = {
+ 20000, 30000
+};
+
+static int bd70528_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ if (ramp_delay > 0 && ramp_delay <= BUCK_RAMP_MAX) {
+ unsigned int ramp_value = BUCK_RAMPRATE_250MV;
+
+ if (ramp_delay <= 125)
+ ramp_value = BUCK_RAMPRATE_125MV;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+ BD70528_MASK_BUCK_RAMP,
+ ramp_value << BD70528_SIFT_BUCK_RAMP);
+ }
+ dev_err(&rdev->dev, "%s: ramp_delay: %d not supported\n",
+ rdev->desc->name, ramp_delay);
+ return -EINVAL;
+}
+
+static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ int ret;
+
+ ret = regulator_is_enabled_regmap(rdev);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ return regulator_set_voltage_sel_regmap(rdev, sel);
+
+ dev_err(&rdev->dev,
+ "LED voltage change not allowed when led is enabled\n");
+
+ return -EBUSY;
+}
+
+static const struct regulator_ops bd70528_buck_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = bd70528_set_ramp_delay,
+};
+
+static const struct regulator_ops bd70528_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = bd70528_set_ramp_delay,
+};
+
+static const struct regulator_ops bd70528_led_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = bd70528_led_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_desc bd70528_desc[] = {
+ {
+ .name = "buck1",
+ .of_match = of_match_ptr("BUCK1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_BUCK1,
+ .ops = &bd70528_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd70528_buck1_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd70528_buck1_volts),
+ .n_voltages = BD70528_BUCK_VOLTS,
+ .enable_reg = BD70528_REG_BUCK1_EN,
+ .enable_mask = BD70528_MASK_RUN_EN,
+ .vsel_reg = BD70528_REG_BUCK1_VOLT,
+ .vsel_mask = BD70528_MASK_BUCK_VOLT,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck2",
+ .of_match = of_match_ptr("BUCK2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_BUCK2,
+ .ops = &bd70528_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd70528_buck2_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd70528_buck2_volts),
+ .n_voltages = BD70528_BUCK_VOLTS,
+ .enable_reg = BD70528_REG_BUCK2_EN,
+ .enable_mask = BD70528_MASK_RUN_EN,
+ .vsel_reg = BD70528_REG_BUCK2_VOLT,
+ .vsel_mask = BD70528_MASK_BUCK_VOLT,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck3",
+ .of_match = of_match_ptr("BUCK3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_BUCK3,
+ .ops = &bd70528_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd70528_buck3_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd70528_buck3_volts),
+ .n_voltages = BD70528_BUCK_VOLTS,
+ .enable_reg = BD70528_REG_BUCK3_EN,
+ .enable_mask = BD70528_MASK_RUN_EN,
+ .vsel_reg = BD70528_REG_BUCK3_VOLT,
+ .vsel_mask = BD70528_MASK_BUCK_VOLT,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo1",
+ .of_match = of_match_ptr("LDO1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_LDO1,
+ .ops = &bd70528_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd70528_ldo_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
+ .n_voltages = BD70528_LDO_VOLTS,
+ .enable_reg = BD70528_REG_LDO1_EN,
+ .enable_mask = BD70528_MASK_RUN_EN,
+ .vsel_reg = BD70528_REG_LDO1_VOLT,
+ .vsel_mask = BD70528_MASK_LDO_VOLT,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo2",
+ .of_match = of_match_ptr("LDO2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_LDO2,
+ .ops = &bd70528_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd70528_ldo_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
+ .n_voltages = BD70528_LDO_VOLTS,
+ .enable_reg = BD70528_REG_LDO2_EN,
+ .enable_mask = BD70528_MASK_RUN_EN,
+ .vsel_reg = BD70528_REG_LDO2_VOLT,
+ .vsel_mask = BD70528_MASK_LDO_VOLT,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo3",
+ .of_match = of_match_ptr("LDO3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_LDO3,
+ .ops = &bd70528_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd70528_ldo_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
+ .n_voltages = BD70528_LDO_VOLTS,
+ .enable_reg = BD70528_REG_LDO3_EN,
+ .enable_mask = BD70528_MASK_RUN_EN,
+ .vsel_reg = BD70528_REG_LDO3_VOLT,
+ .vsel_mask = BD70528_MASK_LDO_VOLT,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo_led1",
+ .of_match = of_match_ptr("LDO_LED1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_LED1,
+ .ops = &bd70528_led_ops,
+ .type = REGULATOR_VOLTAGE,
+ .volt_table = &led_volts[0],
+ .n_voltages = ARRAY_SIZE(led_volts),
+ .enable_reg = BD70528_REG_LED_EN,
+ .enable_mask = BD70528_MASK_LED1_EN,
+ .vsel_reg = BD70528_REG_LED_VOLT,
+ .vsel_mask = BD70528_MASK_LED1_VOLT,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo_led2",
+ .of_match = of_match_ptr("LDO_LED2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD70528_LED2,
+ .ops = &bd70528_led_ops,
+ .type = REGULATOR_VOLTAGE,
+ .volt_table = &led_volts[0],
+ .n_voltages = ARRAY_SIZE(led_volts),
+ .enable_reg = BD70528_REG_LED_EN,
+ .enable_mask = BD70528_MASK_LED2_EN,
+ .vsel_reg = BD70528_REG_LED_VOLT,
+ .vsel_mask = BD70528_MASK_LED2_VOLT,
+ .owner = THIS_MODULE,
+ },
+
+};
+
+static int bd70528_probe(struct platform_device *pdev)
+{
+ struct rohm_regmap_dev *bd70528;
+ int i;
+ struct regulator_config config = {
+ .dev = pdev->dev.parent,
+ };
+
+ bd70528 = dev_get_drvdata(pdev->dev.parent);
+ if (!bd70528) {
+ dev_err(&pdev->dev, "No MFD driver data\n");
+ return -EINVAL;
+ }
+
+ config.regmap = bd70528->regmap;
+
+ for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) {
+ struct regulator_dev *rdev;
+
+ rdev = devm_regulator_register(&pdev->dev, &bd70528_desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ bd70528_desc[i].name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver bd70528_regulator = {
+ .driver = {
+ .name = "bd70528-pmic"
+ },
+ .probe = bd70528_probe,
+};
+
+module_platform_driver(bd70528_regulator);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD70528 voltage regulator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index b8dcdc21dc22..b2191be49670 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -79,7 +79,7 @@ static int bd718xx_set_voltage_sel_pickable_restricted(
return regulator_set_voltage_sel_pickable_regmap(rdev, sel);
}
-static struct regulator_ops bd718xx_pickable_range_ldo_ops = {
+static const struct regulator_ops bd718xx_pickable_range_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -88,7 +88,7 @@ static struct regulator_ops bd718xx_pickable_range_ldo_ops = {
.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
};
-static struct regulator_ops bd718xx_pickable_range_buck_ops = {
+static const struct regulator_ops bd718xx_pickable_range_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -98,7 +98,7 @@ static struct regulator_ops bd718xx_pickable_range_buck_ops = {
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
-static struct regulator_ops bd718xx_ldo_regulator_ops = {
+static const struct regulator_ops bd718xx_ldo_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -107,7 +107,7 @@ static struct regulator_ops bd718xx_ldo_regulator_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
-static struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
+static const struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -116,7 +116,7 @@ static struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
-static struct regulator_ops bd718xx_buck_regulator_ops = {
+static const struct regulator_ops bd718xx_buck_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -126,7 +126,7 @@ static struct regulator_ops bd718xx_buck_regulator_ops = {
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
-static struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
+static const struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -137,7 +137,7 @@ static struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
-static struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
+static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -350,6 +350,135 @@ static const struct reg_init bd71837_ldo6_inits[] = {
},
};
+#define NUM_DVS_BUCKS 4
+
+struct of_dvs_setting {
+ const char *prop;
+ unsigned int reg;
+};
+
+static int set_dvs_levels(const struct of_dvs_setting *dvs,
+ struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regmap *regmap)
+{
+ int ret, i;
+ unsigned int uv;
+
+ ret = of_property_read_u32(np, dvs->prop, &uv);
+ if (ret) {
+ if (ret != -EINVAL)
+ return ret;
+ return 0;
+ }
+
+ for (i = 0; i < desc->n_voltages; i++) {
+ ret = regulator_desc_list_voltage_linear_range(desc, i);
+ if (ret < 0)
+ continue;
+ if (ret == uv) {
+ i <<= ffs(desc->vsel_mask) - 1;
+ ret = regmap_update_bits(regmap, dvs->reg,
+ DVS_BUCK_RUN_MASK, i);
+ break;
+ }
+ }
+ return ret;
+}
+
+static int buck4_set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ int ret, i;
+ const struct of_dvs_setting dvs[] = {
+ {
+ .prop = "rohm,dvs-run-voltage",
+ .reg = BD71837_REG_BUCK4_VOLT_RUN,
+ },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(dvs); i++) {
+ ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
+ if (ret)
+ break;
+ }
+ return ret;
+}
+static int buck3_set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ int ret, i;
+ const struct of_dvs_setting dvs[] = {
+ {
+ .prop = "rohm,dvs-run-voltage",
+ .reg = BD71837_REG_BUCK3_VOLT_RUN,
+ },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(dvs); i++) {
+ ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
+ if (ret)
+ break;
+ }
+ return ret;
+}
+
+static int buck2_set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ int ret, i;
+ const struct of_dvs_setting dvs[] = {
+ {
+ .prop = "rohm,dvs-run-voltage",
+ .reg = BD718XX_REG_BUCK2_VOLT_RUN,
+ },
+ {
+ .prop = "rohm,dvs-idle-voltage",
+ .reg = BD718XX_REG_BUCK2_VOLT_IDLE,
+ },
+ };
+
+
+
+ for (i = 0; i < ARRAY_SIZE(dvs); i++) {
+ ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
+ if (ret)
+ break;
+ }
+ return ret;
+}
+
+static int buck1_set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ int ret, i;
+ const struct of_dvs_setting dvs[] = {
+ {
+ .prop = "rohm,dvs-run-voltage",
+ .reg = BD718XX_REG_BUCK1_VOLT_RUN,
+ },
+ {
+ .prop = "rohm,dvs-idle-voltage",
+ .reg = BD718XX_REG_BUCK1_VOLT_IDLE,
+ },
+ {
+ .prop = "rohm,dvs-suspend-voltage",
+ .reg = BD718XX_REG_BUCK1_VOLT_SUSP,
+ },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(dvs); i++) {
+ ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
+ if (ret)
+ break;
+ }
+ return ret;
+}
+
static const struct bd718xx_regulator_data bd71847_regulators[] = {
{
.desc = {
@@ -368,6 +497,7 @@ static const struct bd718xx_regulator_data bd71847_regulators[] = {
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
+ .of_parse_cb = buck1_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK1_CTRL,
@@ -391,6 +521,7 @@ static const struct bd718xx_regulator_data bd71847_regulators[] = {
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
+ .of_parse_cb = buck2_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK2_CTRL,
@@ -662,6 +793,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
+ .of_parse_cb = buck1_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK1_CTRL,
@@ -685,6 +817,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
+ .of_parse_cb = buck2_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK2_CTRL,
@@ -708,6 +841,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD71837_REG_BUCK3_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
+ .of_parse_cb = buck3_set_hw_dvs_levels,
},
.init = {
.reg = BD71837_REG_BUCK3_CTRL,
@@ -731,6 +865,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD71837_REG_BUCK4_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
+ .of_parse_cb = buck4_set_hw_dvs_levels,
},
.init = {
.reg = BD71837_REG_BUCK4_CTRL,
@@ -1029,6 +1164,7 @@ static int bd718xx_probe(struct platform_device *pdev)
};
int i, j, err;
+ bool use_snvs;
mfd = dev_get_drvdata(pdev->dev.parent);
if (!mfd) {
@@ -1055,27 +1191,28 @@ static int bd718xx_probe(struct platform_device *pdev)
BD718XX_REG_REGLOCK);
}
- /* At poweroff transition PMIC HW disables EN bit for regulators but
- * leaves SEL bit untouched. So if state transition from POWEROFF
- * is done to SNVS - then all power rails controlled by SW (having
- * SEL bit set) stay disabled as EN is cleared. This may result boot
- * failure if any crucial systems are powered by these rails.
- *
+ use_snvs = of_property_read_bool(pdev->dev.parent->of_node,
+ "rohm,reset-snvs-powered");
+
+ /*
* Change the next stage from poweroff to be READY instead of SNVS
* for all reset types because OTP loading at READY will clear SEL
* bit allowing HW defaults for power rails to be used
*/
- err = regmap_update_bits(mfd->regmap, BD718XX_REG_TRANS_COND1,
- BD718XX_ON_REQ_POWEROFF_MASK |
- BD718XX_SWRESET_POWEROFF_MASK |
- BD718XX_WDOG_POWEROFF_MASK |
- BD718XX_KEY_L_POWEROFF_MASK,
- BD718XX_POWOFF_TO_RDY);
- if (err) {
- dev_err(&pdev->dev, "Failed to change reset target\n");
- goto err;
- } else {
- dev_dbg(&pdev->dev, "Changed all resets from SVNS to READY\n");
+ if (!use_snvs) {
+ err = regmap_update_bits(mfd->regmap, BD718XX_REG_TRANS_COND1,
+ BD718XX_ON_REQ_POWEROFF_MASK |
+ BD718XX_SWRESET_POWEROFF_MASK |
+ BD718XX_WDOG_POWEROFF_MASK |
+ BD718XX_KEY_L_POWEROFF_MASK,
+ BD718XX_POWOFF_TO_RDY);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to change reset target\n");
+ goto err;
+ } else {
+ dev_dbg(&pdev->dev,
+ "Changed all resets from SVNS to READY\n");
+ }
}
for (i = 0; i < pmic_regulators[mfd->chip_type].r_amount; i++) {
@@ -1098,19 +1235,33 @@ static int bd718xx_probe(struct platform_device *pdev)
err = PTR_ERR(rdev);
goto err;
}
- /* Regulator register gets the regulator constraints and
+
+ /*
+ * Regulator register gets the regulator constraints and
* applies them (set_machine_constraints). This should have
* turned the control register(s) to correct values and we
* can now switch the control from PMIC state machine to the
* register interface
+ *
+ * At poweroff transition PMIC HW disables EN bit for
+ * regulators but leaves SEL bit untouched. So if state
+ * transition from POWEROFF is done to SNVS - then all power
+ * rails controlled by SW (having SEL bit set) stay disabled
+ * as EN is cleared. This will result boot failure if any
+ * crucial systems are powered by these rails. We don't
+ * enable SW control for crucial regulators if snvs state is
+ * used
*/
- err = regmap_update_bits(mfd->regmap, r->init.reg,
- r->init.mask, r->init.val);
- if (err) {
- dev_err(&pdev->dev,
- "Failed to write BUCK/LDO SEL bit for (%s)\n",
- desc->name);
- goto err;
+ if (!use_snvs || !rdev->constraints->always_on ||
+ !rdev->constraints->boot_on) {
+ err = regmap_update_bits(mfd->regmap, r->init.reg,
+ r->init.mask, r->init.val);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to take control for (%s)\n",
+ desc->name);
+ goto err;
+ }
}
for (j = 0; j < r->additional_init_amnt; j++) {
err = regmap_update_bits(mfd->regmap,
diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
index e12dd1f750f3..e690c2ce5b3c 100644
--- a/drivers/regulator/bd9571mwv-regulator.c
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -100,7 +100,7 @@ static int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
}
/* Operations permitted on AVS voltage regulator */
-static struct regulator_ops avs_ops = {
+static const struct regulator_ops avs_ops = {
.set_voltage_sel = bd9571mwv_avs_set_voltage_sel_regmap,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = bd9571mwv_avs_get_voltage_sel_regmap,
@@ -108,7 +108,7 @@ static struct regulator_ops avs_ops = {
};
/* Operations permitted on voltage regulators */
-static struct regulator_ops reg_ops = {
+static const struct regulator_ops reg_ops = {
.set_voltage_sel = bd9571mwv_reg_set_voltage_sel_regmap,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -116,13 +116,13 @@ static struct regulator_ops reg_ops = {
};
/* Operations permitted on voltage monitors */
-static struct regulator_ops vid_ops = {
+static const struct regulator_ops vid_ops = {
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
};
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f,
0x80, 600000, 10000, 0x3c),
BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf,
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b9d7b45c7295..68473d0cc57e 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -23,7 +23,6 @@
#include <linux/mutex.h>
#include <linux/suspend.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/regmap.h>
@@ -82,7 +81,6 @@ struct regulator_enable_gpio {
struct gpio_desc *gpiod;
u32 enable_count; /* a number of enabled shared GPIO */
u32 request_count; /* a number of requested shared GPIO */
- unsigned int ena_gpio_invert:1;
};
/*
@@ -145,14 +143,6 @@ static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops)
return false;
}
-static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev)
-{
- if (rdev && rdev->supply)
- return rdev->supply->rdev;
-
- return NULL;
-}
-
/**
* regulator_lock_nested - lock a single regulator
* @rdev: regulator source
@@ -326,7 +316,7 @@ err_unlock:
* @rdev: regulator source
* @ww_ctx: w/w mutex acquire context
*
- * Unlock all regulators related with rdev by coupling or suppling.
+ * Unlock all regulators related with rdev by coupling or supplying.
*/
static void regulator_unlock_dependent(struct regulator_dev *rdev,
struct ww_acquire_ctx *ww_ctx)
@@ -341,7 +331,7 @@ static void regulator_unlock_dependent(struct regulator_dev *rdev,
* @ww_ctx: w/w mutex acquire context
*
* This function as a wrapper on regulator_lock_recursive(), which locks
- * all regulators related with rdev by coupling or suppling.
+ * all regulators related with rdev by coupling or supplying.
*/
static void regulator_lock_dependent(struct regulator_dev *rdev,
struct ww_acquire_ctx *ww_ctx)
@@ -924,14 +914,14 @@ static int drms_uA_update(struct regulator_dev *rdev)
int current_uA = 0, output_uV, input_uV, err;
unsigned int mode;
- lockdep_assert_held_once(&rdev->mutex.base);
-
/*
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
*/
- if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) {
+ rdev_dbg(rdev, "DRMS operation not allowed\n");
return 0;
+ }
if (!rdev->desc->ops->get_optimum_mode &&
!rdev->desc->ops->set_load)
@@ -1003,7 +993,7 @@ static int suspend_set_state(struct regulator_dev *rdev,
if (rstate == NULL)
return 0;
- /* If we have no suspend mode configration don't set anything;
+ /* If we have no suspend mode configuration don't set anything;
* only warn if the driver implements set_suspend_voltage or
* set_suspend_mode callback.
*/
@@ -1131,7 +1121,7 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
int current_uV = _regulator_get_voltage(rdev);
if (current_uV == -ENOTRECOVERABLE) {
- /* This regulator can't be read and must be initted */
+ /* This regulator can't be read and must be initialized */
rdev_info(rdev, "Setting %d-%duV\n",
rdev->constraints->min_uV,
rdev->constraints->max_uV);
@@ -1349,7 +1339,9 @@ static int set_machine_constraints(struct regulator_dev *rdev,
* We'll only apply the initial system load if an
* initial mode wasn't specified.
*/
+ regulator_lock(rdev);
drms_uA_update(rdev);
+ regulator_unlock(rdev);
}
if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable)
@@ -1780,7 +1772,7 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
struct device *dev = rdev->dev.parent;
int ret;
- /* No supply to resovle? */
+ /* No supply to resolve? */
if (!rdev->supply_name)
return 0;
@@ -2058,15 +2050,7 @@ static void _regulator_put(struct regulator *regulator)
debugfs_remove_recursive(regulator->debugfs);
if (regulator->dev) {
- int count = 0;
- struct regulator *r;
-
- list_for_each_entry(r, &rdev->consumer_list, list)
- if (r->dev == regulator->dev)
- count++;
-
- if (count == 1)
- device_link_remove(regulator->dev, &rdev->dev);
+ device_link_remove(regulator->dev, &rdev->dev);
/* remove any sysfs entries */
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
@@ -2237,38 +2221,21 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
{
struct regulator_enable_gpio *pin;
struct gpio_desc *gpiod;
- int ret;
- if (config->ena_gpiod)
- gpiod = config->ena_gpiod;
- else
- gpiod = gpio_to_desc(config->ena_gpio);
+ gpiod = config->ena_gpiod;
list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
if (pin->gpiod == gpiod) {
- rdev_dbg(rdev, "GPIO %d is already used\n",
- config->ena_gpio);
+ rdev_dbg(rdev, "GPIO is already used\n");
goto update_ena_gpio_to_rdev;
}
}
- if (!config->ena_gpiod) {
- ret = gpio_request_one(config->ena_gpio,
- GPIOF_DIR_OUT | config->ena_gpio_flags,
- rdev_get_name(rdev));
- if (ret)
- return ret;
- }
-
pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
- if (pin == NULL) {
- if (!config->ena_gpiod)
- gpio_free(config->ena_gpio);
+ if (pin == NULL)
return -ENOMEM;
- }
pin->gpiod = gpiod;
- pin->ena_gpio_invert = config->ena_gpio_invert;
list_add(&pin->list, &regulator_ena_gpio_list);
update_ena_gpio_to_rdev:
@@ -2289,7 +2256,6 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev)
if (pin->gpiod == rdev->ena_pin->gpiod) {
if (pin->request_count <= 1) {
pin->request_count = 0;
- gpiod_put(pin->gpiod);
list_del(&pin->list);
kfree(pin);
rdev->ena_pin = NULL;
@@ -2319,8 +2285,7 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
if (enable) {
/* Enable GPIO at initial use */
if (pin->enable_count == 0)
- gpiod_set_value_cansleep(pin->gpiod,
- !pin->ena_gpio_invert);
+ gpiod_set_value_cansleep(pin->gpiod, 1);
pin->enable_count++;
} else {
@@ -2331,8 +2296,7 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
/* Disable GPIO if not used */
if (pin->enable_count <= 1) {
- gpiod_set_value_cansleep(pin->gpiod,
- pin->ena_gpio_invert);
+ gpiod_set_value_cansleep(pin->gpiod, 0);
pin->enable_count = 0;
}
}
@@ -2409,7 +2373,7 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
* timer wrapping.
* in case of multiple timer wrapping, either it can be
* detected by out-of-range remaining, or it cannot be
- * detected and we gets a panelty of
+ * detected and we get a penalty of
* _regulator_enable_delay().
*/
remaining = intended - start_jiffy;
@@ -2809,7 +2773,7 @@ static void regulator_disable_work(struct work_struct *work)
/**
* regulator_disable_deferred - disable regulator output with delay
* @regulator: regulator source
- * @ms: miliseconds until the regulator is disabled
+ * @ms: milliseconds until the regulator is disabled
*
* Execute regulator_disable() on the regulator after a delay. This
* is intended for use with devices that require some time to quiesce.
@@ -4943,7 +4907,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
* device tree until we have handled it over to the core. If the
* config that was passed in to this function DOES NOT contain
* a descriptor, and the config after this call DOES contain
- * a descriptor, we definately got one from parsing the device
+ * a descriptor, we definitely got one from parsing the device
* tree.
*/
if (!cfg->ena_gpiod && config->ena_gpiod)
@@ -4975,15 +4939,13 @@ regulator_register(const struct regulator_desc *regulator_desc,
goto clean;
}
- if (config->ena_gpiod ||
- ((config->ena_gpio || config->ena_gpio_initialized) &&
- gpio_is_valid(config->ena_gpio))) {
+ if (config->ena_gpiod) {
mutex_lock(&regulator_list_mutex);
ret = regulator_ena_gpio_request(rdev, config);
mutex_unlock(&regulator_list_mutex);
if (ret != 0) {
- rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
- config->ena_gpio, ret);
+ rdev_err(rdev, "Failed to request enable GPIO: %d\n",
+ ret);
goto clean;
}
/* The regulator core took over the GPIO descriptor */
@@ -5251,6 +5213,12 @@ struct device *rdev_get_dev(struct regulator_dev *rdev)
}
EXPORT_SYMBOL_GPL(rdev_get_dev);
+struct regmap *rdev_get_regmap(struct regulator_dev *rdev)
+{
+ return rdev->regmap;
+}
+EXPORT_SYMBOL_GPL(rdev_get_regmap);
+
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
{
return reg_init_data->driver_data;
diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c
index 2131457937b7..e7dab5c4d1d1 100644
--- a/drivers/regulator/cpcap-regulator.c
+++ b/drivers/regulator/cpcap-regulator.c
@@ -100,12 +100,11 @@ struct cpcap_regulator {
struct regulator_desc rdesc;
const u16 assign_reg;
const u16 assign_mask;
- const u16 vsel_shift;
};
#define CPCAP_REG(_ID, reg, assignment_reg, assignment_mask, val_tbl, \
- mode_mask, volt_mask, volt_shft, \
- mode_val, off_val, volt_trans_time) { \
+ mode_mask, volt_mask, mode_val, off_val, \
+ volt_trans_time) { \
.rdesc = { \
.name = #_ID, \
.of_match = of_match_ptr(#_ID), \
@@ -127,7 +126,6 @@ struct cpcap_regulator {
}, \
.assign_reg = (assignment_reg), \
.assign_mask = (assignment_mask), \
- .vsel_shift = (volt_shft), \
}
struct cpcap_ddata {
@@ -336,155 +334,155 @@ static const unsigned int vaudio_val_tbl[] = { 0, 2775000, };
* SW1 to SW4 and SW6 seems to be unused for mapphone. Note that VSIM and
* VSIMCARD have a shared resource assignment bit.
*/
-static struct cpcap_regulator omap4_regulators[] = {
+static const struct cpcap_regulator omap4_regulators[] = {
CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW1_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW2_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW3_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW4_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW5_SEL, sw5_val_tbl,
- 0x28, 0, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
+ 0x28, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW6_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
- 0x87, 0x30, 4, 0x3, 0, 420),
+ 0x87, 0x30, 0x3, 0, 420),
CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
- 0x47, 0x10, 4, 0x43, 0x41, 350),
+ 0x47, 0x10, 0x43, 0x41, 350),
CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
- 0x87, 0x30, 4, 0x3, 0, 420),
+ 0x87, 0x30, 0x3, 0, 420),
CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
- 0x87, 0x30, 4, 0x82, 0, 420),
+ 0x87, 0x30, 0x82, 0, 420),
CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
- 0x80, 0xf, 0, 0x80, 0, 420),
+ 0x80, 0xf, 0x80, 0, 420),
CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
- 0x17, 0, 0, 0, 0x12, 0),
+ 0x17, 0, 0, 0x12, 0),
CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
- 0x87, 0x38, 3, 0x82, 0, 420),
+ 0x87, 0x38, 0x82, 0, 420),
CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
- 0x43, 0x18, 3, 0x2, 0, 420),
+ 0x43, 0x18, 0x2, 0, 420),
CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
- 0xac, 0x2, 1, 0x4, 0, 10),
+ 0xac, 0x2, 0x4, 0, 10),
CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
- 0x23, 0x8, 3, 0, 0, 10),
+ 0x23, 0x8, 0, 0, 10),
CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
- 0x23, 0x8, 3, 0, 0, 420),
+ 0x23, 0x8, 0, 0, 420),
CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
- 0x47, 0x10, 4, 0, 0, 420),
+ 0x47, 0x10, 0, 0, 420),
CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
- 0x20c, 0xc0, 6, 0x20c, 0, 420),
+ 0x20c, 0xc0, 0x20c, 0, 420),
CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsim_val_tbl,
- 0x23, 0x8, 3, 0x3, 0, 420),
+ 0x23, 0x8, 0x3, 0, 420),
CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsimcard_val_tbl,
- 0x1e80, 0x8, 3, 0x1e00, 0, 420),
+ 0x1e80, 0x8, 0x1e00, 0, 420),
CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
- 0x1, 0xc, 2, 0x1, 0, 500),
+ 0x1, 0xc, 0x1, 0, 500),
CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
- 0x11c, 0x40, 6, 0xc, 0, 0),
+ 0x11c, 0x40, 0xc, 0, 0),
CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
- 0x16, 0x1, 0, 0x4, 0, 0),
+ 0x16, 0x1, 0x4, 0, 0),
{ /* sentinel */ },
};
-static struct cpcap_regulator xoom_regulators[] = {
+static const struct cpcap_regulator xoom_regulators[] = {
CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW1_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW2_SEL, sw2_sw4_val_tbl,
- 0xf00, 0x7f, 0, 0x800, 0, 120),
+ 0xf00, 0x7f, 0x800, 0, 120),
CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW3_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW4_SEL, sw2_sw4_val_tbl,
- 0xf00, 0x7f, 0, 0x900, 0, 100),
+ 0xf00, 0x7f, 0x900, 0, 100),
CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW5_SEL, sw5_val_tbl,
- 0x2a, 0, 0, 0x22, 0, 0),
+ 0x2a, 0, 0x22, 0, 0),
CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW6_SEL, unknown_val_tbl,
- 0, 0, 0, 0, 0, 0),
+ 0, 0, 0, 0, 0),
CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
- 0x87, 0x30, 4, 0x7, 0, 420),
+ 0x87, 0x30, 0x7, 0, 420),
CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
- 0x47, 0x10, 4, 0x7, 0, 350),
+ 0x47, 0x10, 0x7, 0, 350),
CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
- 0x87, 0x30, 4, 0x3, 0, 420),
+ 0x87, 0x30, 0x3, 0, 420),
CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
- 0x87, 0x30, 4, 0x5, 0, 420),
+ 0x87, 0x30, 0x5, 0, 420),
CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
- 0x80, 0xf, 0, 0x80, 0, 420),
+ 0x80, 0xf, 0x80, 0, 420),
CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
- 0x17, 0, 0, 0x2, 0, 0),
+ 0x17, 0, 0x2, 0, 0),
CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
- 0x87, 0x38, 3, 0x2, 0, 420),
+ 0x87, 0x38, 0x2, 0, 420),
CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
- 0x43, 0x18, 3, 0x1, 0, 420),
+ 0x43, 0x18, 0x1, 0, 420),
CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
- 0xac, 0x2, 1, 0xc, 0, 10),
+ 0xac, 0x2, 0xc, 0, 10),
CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
- 0x23, 0x8, 3, 0x3, 0, 10),
+ 0x23, 0x8, 0x3, 0, 10),
CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
- 0x23, 0x8, 3, 0x3, 0, 420),
+ 0x23, 0x8, 0x3, 0, 420),
CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
- 0x47, 0x10, 4, 0x5, 0, 420),
+ 0x47, 0x10, 0x5, 0, 420),
CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
- 0x20c, 0xc0, 6, 0x8, 0, 420),
+ 0x20c, 0xc0, 0x8, 0, 420),
CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsim_val_tbl,
- 0x23, 0x8, 3, 0x3, 0, 420),
+ 0x23, 0x8, 0x3, 0, 420),
CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsimcard_val_tbl,
- 0x1e80, 0x8, 3, 0x1e00, 0, 420),
+ 0x1e80, 0x8, 0x1e00, 0, 420),
CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
- 0x1, 0xc, 2, 0, 0x1, 500),
+ 0x1, 0xc, 0, 0x1, 500),
CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
- 0x11c, 0x40, 6, 0xc, 0, 0),
+ 0x11c, 0x40, 0xc, 0, 0),
CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
- 0x16, 0x1, 0, 0x4, 0, 0),
+ 0x16, 0x1, 0x4, 0, 0),
{ /* sentinel */ },
};
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 207cb3859dcc..cefa3558236d 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -290,10 +290,10 @@ static const struct regulator_ops da9052_ldo_ops = {
.disable = regulator_disable_regmap,
};
-#define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \
+#define DA9052_LDO(_id, _name, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
- .name = #_id,\
+ .name = #_name,\
.ops = &da9052_ldo_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
@@ -310,10 +310,10 @@ static const struct regulator_ops da9052_ldo_ops = {
.activate_bit = (abits),\
}
-#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \
+#define DA9052_DCDC(_id, _name, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
- .name = #_id,\
+ .name = #_name,\
.ops = &da9052_dcdc_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
@@ -331,37 +331,37 @@ static const struct regulator_ops da9052_ldo_ops = {
}
static struct da9052_regulator_info da9052_regulator_info[] = {
- DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
- DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
- DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
- DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0),
- DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
- DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
- DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
- DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
- DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0),
- DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0),
+ DA9052_DCDC(BUCK1, buck1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
+ DA9052_DCDC(BUCK2, buck2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
+ DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
+ DA9052_DCDC(BUCK4, buck4, 50, 1800, 3600, 5, 6, 0),
+ DA9052_LDO(LDO1, ldo1, 50, 600, 1800, 5, 6, 0),
+ DA9052_LDO(LDO2, ldo2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
+ DA9052_LDO(LDO3, ldo3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
+ DA9052_LDO(LDO4, ldo4, 25, 1725, 3300, 6, 6, 0),
+ DA9052_LDO(LDO5, ldo5, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO6, ldo6, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO7, ldo7, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO8, ldo8, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO9, ldo9, 50, 1250, 3650, 6, 6, 0),
+ DA9052_LDO(LDO10, ldo10, 50, 1200, 3600, 6, 6, 0),
};
static struct da9052_regulator_info da9053_regulator_info[] = {
- DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
- DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
- DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
- DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0),
- DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
- DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
- DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
- DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
- DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0),
- DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0),
- DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0),
+ DA9052_DCDC(BUCK1, buck1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
+ DA9052_DCDC(BUCK2, buck2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
+ DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
+ DA9052_DCDC(BUCK4, buck4, 25, 950, 2525, 6, 6, 0),
+ DA9052_LDO(LDO1, ldo1, 50, 600, 1800, 5, 6, 0),
+ DA9052_LDO(LDO2, ldo2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
+ DA9052_LDO(LDO3, ldo3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
+ DA9052_LDO(LDO4, ldo4, 25, 1725, 3300, 6, 6, 0),
+ DA9052_LDO(LDO5, ldo5, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO6, ldo6, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO7, ldo7, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO8, ldo8, 50, 1200, 3600, 6, 6, 0),
+ DA9052_LDO(LDO9, ldo9, 50, 1250, 3650, 6, 6, 0),
+ DA9052_LDO(LDO10, ldo10, 50, 1200, 3600, 6, 6, 0),
};
static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id,
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index 588c3d2445cf..3c6fac793658 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -48,7 +48,9 @@
#define DA9055_ID_LDO6 7
/* DA9055 BUCK current limit */
-static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
+static const unsigned int da9055_current_limits[] = {
+ 500000, 600000, 700000, 800000
+};
struct da9055_conf_reg {
int reg;
@@ -169,39 +171,6 @@ static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
val << volt.sl_shift);
}
-static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
-{
- struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
- struct da9055_regulator_info *info = regulator->info;
- int ret;
-
- ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
- if (ret < 0)
- return ret;
-
- ret &= info->mode.mask;
- return da9055_current_limits[ret >> info->mode.shift];
-}
-
-static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
- int max_uA)
-{
- struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
- struct da9055_regulator_info *info = regulator->info;
- int i;
-
- for (i = ARRAY_SIZE(da9055_current_limits) - 1; i >= 0; i--) {
- if ((min_uA <= da9055_current_limits[i]) &&
- (da9055_current_limits[i] <= max_uA))
- return da9055_reg_update(regulator->da9055,
- DA9055_REG_BUCK_LIM,
- info->mode.mask,
- i << info->mode.shift);
- }
-
- return -EINVAL;
-}
-
static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
@@ -329,8 +298,8 @@ static const struct regulator_ops da9055_buck_ops = {
.get_mode = da9055_buck_get_mode,
.set_mode = da9055_buck_set_mode,
- .get_current_limit = da9055_buck_get_current_limit,
- .set_current_limit = da9055_buck_set_current_limit,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
.get_voltage_sel = da9055_regulator_get_voltage_sel,
.set_voltage_sel = da9055_regulator_set_voltage_sel,
@@ -407,6 +376,10 @@ static const struct regulator_ops da9055_ldo_ops = {
.uV_step = (step) * 1000,\
.linear_min_sel = (voffset),\
.owner = THIS_MODULE,\
+ .curr_table = da9055_current_limits,\
+ .n_current_limits = ARRAY_SIZE(da9055_current_limits),\
+ .csel_reg = DA9055_REG_BUCK_LIM,\
+ .csel_mask = (mbits),\
},\
.conf = {\
.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
@@ -457,7 +430,6 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
int gpio_mux = pdata->gpio_ren[id];
config->ena_gpiod = pdata->ena_gpiods[id];
- config->ena_gpio_invert = 1;
/*
* GPI pin is muxed with regulator to control the
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index 34a70d9dc450..b064d8a19d4c 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -126,7 +126,7 @@ static int da9062_set_current_limit(struct regulator_dev *rdev,
const struct da9062_regulator_info *rinfo = regl->info;
int n, tval;
- for (n = 0; n < rinfo->n_current_limits; n++) {
+ for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
tval = rinfo->current_limits[n];
if (tval >= min_ua && tval <= max_ua)
return regmap_field_write(regl->ilimit, n);
@@ -992,7 +992,6 @@ static int da9062_regulator_probe(struct platform_device *pdev)
struct regulator_config config = { };
const struct da9062_regulator_info *rinfo;
int irq, n, ret;
- size_t size;
int max_regulators;
switch (chip->chip_type) {
@@ -1010,9 +1009,8 @@ static int da9062_regulator_probe(struct platform_device *pdev)
}
/* Allocate memory required by usable regulators */
- size = sizeof(struct da9062_regulators) +
- max_regulators * sizeof(struct da9062_regulator);
- regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ regulators = devm_kzalloc(&pdev->dev, struct_size(regulators, regulator,
+ max_regulators), GFP_KERNEL);
if (!regulators)
return -ENOMEM;
@@ -1029,31 +1027,50 @@ static int da9062_regulator_probe(struct platform_device *pdev)
regl->desc.type = REGULATOR_VOLTAGE;
regl->desc.owner = THIS_MODULE;
- if (regl->info->mode.reg)
+ if (regl->info->mode.reg) {
regl->mode = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->mode);
- if (regl->info->suspend.reg)
+ if (IS_ERR(regl->mode))
+ return PTR_ERR(regl->mode);
+ }
+
+ if (regl->info->suspend.reg) {
regl->suspend = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->suspend);
- if (regl->info->sleep.reg)
+ if (IS_ERR(regl->suspend))
+ return PTR_ERR(regl->suspend);
+ }
+
+ if (regl->info->sleep.reg) {
regl->sleep = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->sleep);
- if (regl->info->suspend_sleep.reg)
+ if (IS_ERR(regl->sleep))
+ return PTR_ERR(regl->sleep);
+ }
+
+ if (regl->info->suspend_sleep.reg) {
regl->suspend_sleep = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->suspend_sleep);
- if (regl->info->ilimit.reg)
+ if (IS_ERR(regl->suspend_sleep))
+ return PTR_ERR(regl->suspend_sleep);
+ }
+
+ if (regl->info->ilimit.reg) {
regl->ilimit = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->ilimit);
+ if (IS_ERR(regl->ilimit))
+ return PTR_ERR(regl->ilimit);
+ }
/* Register regulator */
memset(&config, 0, sizeof(config));
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 8cbcd2a3eb20..2b0c7a85306a 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -167,7 +167,7 @@ static int da9063_set_current_limit(struct regulator_dev *rdev,
const struct da9063_regulator_info *rinfo = regl->info;
int n, tval;
- for (n = 0; n < rinfo->n_current_limits; n++) {
+ for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
tval = rinfo->current_limits[n];
if (tval >= min_uA && tval <= max_uA)
return regmap_field_write(regl->ilimit, n);
@@ -739,7 +739,6 @@ static int da9063_regulator_probe(struct platform_device *pdev)
struct regulator_config config;
bool bcores_merged, bmem_bio_merged;
int id, irq, n, n_regulators, ret, val;
- size_t size;
regl_pdata = da9063_pdata ? da9063_pdata->regulators_pdata : NULL;
@@ -784,9 +783,8 @@ static int da9063_regulator_probe(struct platform_device *pdev)
n_regulators--; /* remove BMEM_BIO_MERGED */
/* Allocate memory required by usable regulators */
- size = sizeof(struct da9063_regulators) +
- n_regulators * sizeof(struct da9063_regulator);
- regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ regulators = devm_kzalloc(&pdev->dev, struct_size(regulators,
+ regulator, n_regulators), GFP_KERNEL);
if (!regulators)
return -ENOMEM;
@@ -835,21 +833,40 @@ static int da9063_regulator_probe(struct platform_device *pdev)
regl->desc.type = REGULATOR_VOLTAGE;
regl->desc.owner = THIS_MODULE;
- if (regl->info->mode.reg)
+ if (regl->info->mode.reg) {
regl->mode = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->mode);
- if (regl->info->suspend.reg)
+ if (IS_ERR(regl->mode))
+ return PTR_ERR(regl->mode);
+ }
+
+ if (regl->info->suspend.reg) {
regl->suspend = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->suspend);
- if (regl->info->sleep.reg)
+ if (IS_ERR(regl->suspend))
+ return PTR_ERR(regl->suspend);
+ }
+
+ if (regl->info->sleep.reg) {
regl->sleep = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->sleep);
- if (regl->info->suspend_sleep.reg)
+ if (IS_ERR(regl->sleep))
+ return PTR_ERR(regl->sleep);
+ }
+
+ if (regl->info->suspend_sleep.reg) {
regl->suspend_sleep = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->suspend_sleep);
- if (regl->info->ilimit.reg)
+ if (IS_ERR(regl->suspend_sleep))
+ return PTR_ERR(regl->suspend_sleep);
+ }
+
+ if (regl->info->ilimit.reg) {
regl->ilimit = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->ilimit);
+ if (IS_ERR(regl->ilimit))
+ return PTR_ERR(regl->ilimit);
+ }
/* Register regulator */
memset(&config, 0, sizeof(config));
diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 84dba64ed11e..528303771723 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -41,10 +41,6 @@ static const struct regmap_config da9210_regmap_config = {
.val_bits = 8,
};
-static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
- int max_uA);
-static int da9210_get_current_limit(struct regulator_dev *rdev);
-
static const struct regulator_ops da9210_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -52,8 +48,8 @@ static const struct regulator_ops da9210_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
- .set_current_limit = da9210_set_current_limit,
- .get_current_limit = da9210_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
};
/* Default limits measured in millivolts and milliamps */
@@ -62,7 +58,7 @@ static const struct regulator_ops da9210_buck_ops = {
#define DA9210_STEP_MV 10
/* Current limits for buck (uA) indices corresponds with register values */
-static const int da9210_buck_limits[] = {
+static const unsigned int da9210_buck_limits[] = {
1600000, 1800000, 2000000, 2200000, 2400000, 2600000, 2800000, 3000000,
3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000, 4600000
};
@@ -80,47 +76,12 @@ static const struct regulator_desc da9210_reg = {
.enable_reg = DA9210_REG_BUCK_CONT,
.enable_mask = DA9210_BUCK_EN,
.owner = THIS_MODULE,
+ .curr_table = da9210_buck_limits,
+ .n_current_limits = ARRAY_SIZE(da9210_buck_limits),
+ .csel_reg = DA9210_REG_BUCK_ILIM,
+ .csel_mask = DA9210_BUCK_ILIM_MASK,
};
-static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
- int max_uA)
-{
- struct da9210 *chip = rdev_get_drvdata(rdev);
- unsigned int sel;
- int i;
-
- /* search for closest to maximum */
- for (i = ARRAY_SIZE(da9210_buck_limits)-1; i >= 0; i--) {
- if (min_uA <= da9210_buck_limits[i] &&
- max_uA >= da9210_buck_limits[i]) {
- sel = i;
- sel = sel << DA9210_BUCK_ILIM_SHIFT;
- return regmap_update_bits(chip->regmap,
- DA9210_REG_BUCK_ILIM,
- DA9210_BUCK_ILIM_MASK, sel);
- }
- }
-
- return -EINVAL;
-}
-
-static int da9210_get_current_limit(struct regulator_dev *rdev)
-{
- struct da9210 *chip = rdev_get_drvdata(rdev);
- unsigned int data;
- unsigned int sel;
- int ret;
-
- ret = regmap_read(chip->regmap, DA9210_REG_BUCK_ILIM, &data);
- if (ret < 0)
- return ret;
-
- /* select one of 16 values: 0000 (1600mA) to 1111 (4600mA) */
- sel = (data & DA9210_BUCK_ILIM_MASK) >> DA9210_BUCK_ILIM_SHIFT;
-
- return da9210_buck_limits[sel];
-}
-
static irqreturn_t da9210_irq_handler(int irq, void *data)
{
struct da9210 *chip = data;
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index a3bc8037153e..771a06d1900d 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -40,7 +40,6 @@
/* VSEL bit definitions */
#define VSEL_BUCK_EN (1 << 7)
#define VSEL_MODE (1 << 6)
-#define VSEL_NSEL_MASK 0x3F
/* Chip ID and Verison */
#define DIE_ID 0x0F /* ID1 */
#define DIE_REV 0x0F /* ID2 */
@@ -49,14 +48,26 @@
#define CTL_SLEW_MASK (0x7 << 4)
#define CTL_SLEW_SHIFT 4
#define CTL_RESET (1 << 2)
+#define CTL_MODE_VSEL0_MODE BIT(0)
+#define CTL_MODE_VSEL1_MODE BIT(1)
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
+#define FAN53526_NVOLTAGES 128
enum fan53555_vendor {
- FAN53555_VENDOR_FAIRCHILD = 0,
+ FAN53526_VENDOR_FAIRCHILD = 0,
+ FAN53555_VENDOR_FAIRCHILD,
FAN53555_VENDOR_SILERGY,
};
+enum {
+ FAN53526_CHIP_ID_01 = 1,
+};
+
+enum {
+ FAN53526_CHIP_REV_08 = 8,
+};
+
/* IC Type */
enum {
FAN53555_CHIP_ID_00 = 0,
@@ -94,8 +105,12 @@ struct fan53555_device_info {
/* Voltage range and step(linear) */
unsigned int vsel_min;
unsigned int vsel_step;
+ unsigned int vsel_count;
/* Voltage slew rate limiting */
unsigned int slew_rate;
+ /* Mode */
+ unsigned int mode_reg;
+ unsigned int mode_mask;
/* Sleep voltage cache */
unsigned int sleep_vol_cache;
};
@@ -111,7 +126,7 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
if (ret < 0)
return ret;
ret = regmap_update_bits(di->regmap, di->sleep_reg,
- VSEL_NSEL_MASK, ret);
+ di->desc.vsel_mask, ret);
if (ret < 0)
return ret;
/* Cache the sleep voltage setting.
@@ -143,11 +158,11 @@ static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
switch (mode) {
case REGULATOR_MODE_FAST:
- regmap_update_bits(di->regmap, di->vol_reg,
- VSEL_MODE, VSEL_MODE);
+ regmap_update_bits(di->regmap, di->mode_reg,
+ di->mode_mask, di->mode_mask);
break;
case REGULATOR_MODE_NORMAL:
- regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
+ regmap_update_bits(di->regmap, di->vol_reg, di->mode_mask, 0);
break;
default:
return -EINVAL;
@@ -161,10 +176,10 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
unsigned int val;
int ret = 0;
- ret = regmap_read(di->regmap, di->vol_reg, &val);
+ ret = regmap_read(di->regmap, di->mode_reg, &val);
if (ret < 0)
return ret;
- if (val & VSEL_MODE)
+ if (val & di->mode_mask)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
@@ -219,6 +234,34 @@ static const struct regulator_ops fan53555_regulator_ops = {
.set_suspend_disable = fan53555_set_suspend_disable,
};
+static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
+{
+ /* Init voltage range and step */
+ switch (di->chip_id) {
+ case FAN53526_CHIP_ID_01:
+ switch (di->chip_rev) {
+ case FAN53526_CHIP_REV_08:
+ di->vsel_min = 600000;
+ di->vsel_step = 6250;
+ break;
+ default:
+ dev_err(di->dev,
+ "Chip ID %d with rev %d not supported!\n",
+ di->chip_id, di->chip_rev);
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_err(di->dev,
+ "Chip ID %d not supported!\n", di->chip_id);
+ return -EINVAL;
+ }
+
+ di->vsel_count = FAN53526_NVOLTAGES;
+
+ return 0;
+}
+
static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
@@ -257,6 +300,8 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
return -EINVAL;
}
+ di->vsel_count = FAN53555_NVOLTAGES;
+
return 0;
}
@@ -274,6 +319,8 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
return -EINVAL;
}
+ di->vsel_count = FAN53555_NVOLTAGES;
+
return 0;
}
@@ -302,7 +349,35 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
return -EINVAL;
}
+ /* Setup mode control register */
+ switch (di->vendor) {
+ case FAN53526_VENDOR_FAIRCHILD:
+ di->mode_reg = FAN53555_CONTROL;
+
+ switch (pdata->sleep_vsel_id) {
+ case FAN53555_VSEL_ID_0:
+ di->mode_mask = CTL_MODE_VSEL1_MODE;
+ break;
+ case FAN53555_VSEL_ID_1:
+ di->mode_mask = CTL_MODE_VSEL0_MODE;
+ break;
+ }
+ break;
+ case FAN53555_VENDOR_FAIRCHILD:
+ case FAN53555_VENDOR_SILERGY:
+ di->mode_reg = di->vol_reg;
+ di->mode_mask = VSEL_MODE;
+ break;
+ default:
+ dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
+ return -EINVAL;
+ }
+
+ /* Setup voltage range */
switch (di->vendor) {
+ case FAN53526_VENDOR_FAIRCHILD:
+ ret = fan53526_voltages_setup_fairchild(di);
+ break;
case FAN53555_VENDOR_FAIRCHILD:
ret = fan53555_voltages_setup_fairchild(di);
break;
@@ -326,13 +401,13 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
rdesc->supply_name = "vin";
rdesc->ops = &fan53555_regulator_ops;
rdesc->type = REGULATOR_VOLTAGE;
- rdesc->n_voltages = FAN53555_NVOLTAGES;
+ rdesc->n_voltages = di->vsel_count;
rdesc->enable_reg = di->vol_reg;
rdesc->enable_mask = VSEL_BUCK_EN;
rdesc->min_uV = di->vsel_min;
rdesc->uV_step = di->vsel_step;
rdesc->vsel_reg = di->vol_reg;
- rdesc->vsel_mask = VSEL_NSEL_MASK;
+ rdesc->vsel_mask = di->vsel_count - 1;
rdesc->owner = THIS_MODULE;
di->rdev = devm_regulator_register(di->dev, &di->desc, config);
@@ -368,6 +443,9 @@ static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
static const struct of_device_id fan53555_dt_ids[] = {
{
+ .compatible = "fcs,fan53526",
+ .data = (void *)FAN53526_VENDOR_FAIRCHILD,
+ }, {
.compatible = "fcs,fan53555",
.data = (void *)FAN53555_VENDOR_FAIRCHILD
}, {
@@ -412,11 +490,13 @@ static int fan53555_regulator_probe(struct i2c_client *client,
} else {
/* if no ramp constraint set, get the pdata ramp_delay */
if (!di->regulator->constraints.ramp_delay) {
- int slew_idx = (pdata->slew_rate & 0x7)
- ? pdata->slew_rate : 0;
+ if (pdata->slew_rate >= ARRAY_SIZE(slew_rates)) {
+ dev_err(&client->dev, "Invalid slew_rate\n");
+ return -EINVAL;
+ }
di->regulator->constraints.ramp_delay
- = slew_rates[slew_idx];
+ = slew_rates[pdata->slew_rate];
}
di->vendor = id->driver_data;
@@ -467,6 +547,9 @@ static int fan53555_regulator_probe(struct i2c_client *client,
static const struct i2c_device_id fan53555_id[] = {
{
+ .name = "fan53526",
+ .driver_data = FAN53526_VENDOR_FAIRCHILD
+ }, {
.name = "fan53555",
.driver_data = FAN53555_VENDOR_FAIRCHILD
}, {
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 9abdb9130766..b5afc9db2c61 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -79,15 +79,6 @@ of_get_fixed_voltage_config(struct device *dev,
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
- /*
- * FIXME: we pulled active low/high and open drain handling into
- * gpiolib so it will be handled there. Delete this in the second
- * step when we also remove the custom inversion handling for all
- * legacy boardfiles.
- */
- config->enable_high = 1;
- config->gpio_is_open_drain = 0;
-
if (of_find_property(np, "vin-supply", NULL))
config->input_supply = "vin";
@@ -151,24 +142,14 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
drvdata->desc.fixed_uV = config->microvolts;
- cfg.ena_gpio_invert = !config->enable_high;
- if (config->enabled_at_boot) {
- if (config->enable_high)
- gflags = GPIOD_OUT_HIGH;
- else
- gflags = GPIOD_OUT_LOW;
- } else {
- if (config->enable_high)
- gflags = GPIOD_OUT_LOW;
- else
- gflags = GPIOD_OUT_HIGH;
- }
- if (config->gpio_is_open_drain) {
- if (gflags == GPIOD_OUT_HIGH)
- gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
- else
- gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
- }
+ /*
+ * The signal will be inverted by the GPIO core if flagged so in the
+ * decriptor.
+ */
+ if (config->enabled_at_boot)
+ gflags = GPIOD_OUT_HIGH;
+ else
+ gflags = GPIOD_OUT_LOW;
/*
* Some fixed regulators share the enable line between two
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index b2f5ec4f658a..6157001df0a4 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -30,16 +30,15 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/gpio-regulator.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
struct gpio_regulator_data {
struct regulator_desc desc;
struct regulator_dev *dev;
- struct gpio *gpios;
+ struct gpio_desc **gpiods;
int nr_gpios;
struct gpio_regulator_state *states;
@@ -82,7 +81,7 @@ static int gpio_regulator_set_voltage(struct regulator_dev *dev,
for (ptr = 0; ptr < data->nr_gpios; ptr++) {
state = (target & (1 << ptr)) >> ptr;
- gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
+ gpiod_set_value_cansleep(data->gpiods[ptr], state);
}
data->state = target;
@@ -119,7 +118,7 @@ static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
for (ptr = 0; ptr < data->nr_gpios; ptr++) {
state = (target & (1 << ptr)) >> ptr;
- gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
+ gpiod_set_value_cansleep(data->gpiods[ptr], state);
}
data->state = target;
@@ -138,7 +137,8 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
{
struct gpio_regulator_config *config;
const char *regtype;
- int proplen, gpio, i;
+ int proplen, i;
+ int ngpios;
int ret;
config = devm_kzalloc(dev,
@@ -153,59 +153,36 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
config->supply_name = config->init_data->constraints.name;
- if (of_property_read_bool(np, "enable-active-high"))
- config->enable_high = true;
-
if (of_property_read_bool(np, "enable-at-boot"))
config->enabled_at_boot = true;
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
- config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
- if (config->enable_gpio < 0 && config->enable_gpio != -ENOENT)
- return ERR_PTR(config->enable_gpio);
-
- /* Fetch GPIOs. - optional property*/
- ret = of_gpio_count(np);
- if ((ret < 0) && (ret != -ENOENT))
- return ERR_PTR(ret);
-
- if (ret > 0) {
- config->nr_gpios = ret;
- config->gpios = devm_kcalloc(dev,
- config->nr_gpios, sizeof(struct gpio),
- GFP_KERNEL);
- if (!config->gpios)
+ /* Fetch GPIO init levels */
+ ngpios = gpiod_count(dev, NULL);
+ if (ngpios > 0) {
+ config->gflags = devm_kzalloc(dev,
+ sizeof(enum gpiod_flags)
+ * ngpios,
+ GFP_KERNEL);
+ if (!config->gflags)
return ERR_PTR(-ENOMEM);
- proplen = of_property_count_u32_elems(np, "gpios-states");
- /* optional property */
- if (proplen < 0)
- proplen = 0;
+ for (i = 0; i < ngpios; i++) {
+ u32 val;
- if (proplen > 0 && proplen != config->nr_gpios) {
- dev_warn(dev, "gpios <-> gpios-states mismatch\n");
- proplen = 0;
- }
+ ret = of_property_read_u32_index(np, "gpios-states", i,
+ &val);
- for (i = 0; i < config->nr_gpios; i++) {
- gpio = of_get_named_gpio(np, "gpios", i);
- if (gpio < 0) {
- if (gpio != -ENOENT)
- return ERR_PTR(gpio);
- break;
- }
- config->gpios[i].gpio = gpio;
- config->gpios[i].label = config->supply_name;
- if (proplen > 0) {
- of_property_read_u32_index(np, "gpios-states",
- i, &ret);
- if (ret)
- config->gpios[i].flags =
- GPIOF_OUT_INIT_HIGH;
- }
+ /* Default to high per specification */
+ if (ret)
+ config->gflags[i] = GPIOD_OUT_HIGH;
+ else
+ config->gflags[i] =
+ val ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
}
}
+ config->ngpios = ngpios;
/* Fetch states. */
proplen = of_property_count_u32_elems(np, "states");
@@ -251,59 +228,56 @@ static struct regulator_ops gpio_regulator_current_ops = {
static int gpio_regulator_probe(struct platform_device *pdev)
{
- struct gpio_regulator_config *config = dev_get_platdata(&pdev->dev);
- struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct gpio_regulator_config *config = dev_get_platdata(dev);
+ struct device_node *np = dev->of_node;
struct gpio_regulator_data *drvdata;
struct regulator_config cfg = { };
- int ptr, ret, state;
+ enum gpiod_flags gflags;
+ int ptr, ret, state, i;
- drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
+ drvdata = devm_kzalloc(dev, sizeof(struct gpio_regulator_data),
GFP_KERNEL);
if (drvdata == NULL)
return -ENOMEM;
if (np) {
- config = of_get_gpio_regulator_config(&pdev->dev, np,
+ config = of_get_gpio_regulator_config(dev, np,
&drvdata->desc);
if (IS_ERR(config))
return PTR_ERR(config);
}
- drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+ drvdata->desc.name = devm_kstrdup(dev, config->supply_name, GFP_KERNEL);
if (drvdata->desc.name == NULL) {
- dev_err(&pdev->dev, "Failed to allocate supply name\n");
+ dev_err(dev, "Failed to allocate supply name\n");
return -ENOMEM;
}
- if (config->nr_gpios != 0) {
- drvdata->gpios = kmemdup(config->gpios,
- config->nr_gpios * sizeof(struct gpio),
- GFP_KERNEL);
- if (drvdata->gpios == NULL) {
- dev_err(&pdev->dev, "Failed to allocate gpio data\n");
- ret = -ENOMEM;
- goto err_name;
- }
-
- drvdata->nr_gpios = config->nr_gpios;
- ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "Could not obtain regulator setting GPIOs: %d\n",
- ret);
- goto err_memgpio;
- }
+ drvdata->gpiods = devm_kzalloc(dev, sizeof(struct gpio_desc *),
+ GFP_KERNEL);
+ if (!drvdata->gpiods)
+ return -ENOMEM;
+ for (i = 0; i < config->ngpios; i++) {
+ drvdata->gpiods[i] = devm_gpiod_get_index(dev,
+ NULL,
+ i,
+ config->gflags[i]);
+ if (IS_ERR(drvdata->gpiods[i]))
+ return PTR_ERR(drvdata->gpiods[i]);
+ /* This is good to know */
+ gpiod_set_consumer_name(drvdata->gpiods[i], drvdata->desc.name);
}
+ drvdata->nr_gpios = config->ngpios;
- drvdata->states = kmemdup(config->states,
- config->nr_states *
- sizeof(struct gpio_regulator_state),
- GFP_KERNEL);
+ drvdata->states = devm_kmemdup(dev,
+ config->states,
+ config->nr_states *
+ sizeof(struct gpio_regulator_state),
+ GFP_KERNEL);
if (drvdata->states == NULL) {
- dev_err(&pdev->dev, "Failed to allocate state data\n");
- ret = -ENOMEM;
- goto err_stategpio;
+ dev_err(dev, "Failed to allocate state data\n");
+ return -ENOMEM;
}
drvdata->nr_states = config->nr_states;
@@ -322,61 +296,46 @@ static int gpio_regulator_probe(struct platform_device *pdev)
drvdata->desc.ops = &gpio_regulator_current_ops;
break;
default:
- dev_err(&pdev->dev, "No regulator type set\n");
- ret = -EINVAL;
- goto err_memstate;
+ dev_err(dev, "No regulator type set\n");
+ return -EINVAL;
}
/* build initial state from gpio init data. */
state = 0;
for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
- if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
+ if (config->gflags[ptr] == GPIOD_OUT_HIGH)
state |= (1 << ptr);
}
drvdata->state = state;
- cfg.dev = &pdev->dev;
+ cfg.dev = dev;
cfg.init_data = config->init_data;
cfg.driver_data = drvdata;
cfg.of_node = np;
- if (gpio_is_valid(config->enable_gpio)) {
- cfg.ena_gpio = config->enable_gpio;
- cfg.ena_gpio_initialized = true;
- }
- cfg.ena_gpio_invert = !config->enable_high;
- if (config->enabled_at_boot) {
- if (config->enable_high)
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
- else
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
- } else {
- if (config->enable_high)
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
- else
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
- }
+ /*
+ * The signal will be inverted by the GPIO core if flagged so in the
+ * decriptor.
+ */
+ if (config->enabled_at_boot)
+ gflags = GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
+ else
+ gflags = GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
+
+ cfg.ena_gpiod = gpiod_get_optional(dev, "enable", gflags);
+ if (IS_ERR(cfg.ena_gpiod))
+ return PTR_ERR(cfg.ena_gpiod);
drvdata->dev = regulator_register(&drvdata->desc, &cfg);
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
- dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
- goto err_memstate;
+ dev_err(dev, "Failed to register regulator: %d\n", ret);
+ return ret;
}
platform_set_drvdata(pdev, drvdata);
return 0;
-
-err_memstate:
- kfree(drvdata->states);
-err_stategpio:
- gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
-err_memgpio:
- kfree(drvdata->gpios);
-err_name:
- kfree(drvdata->desc.name);
- return ret;
}
static int gpio_regulator_remove(struct platform_device *pdev)
@@ -385,13 +344,6 @@ static int gpio_regulator_remove(struct platform_device *pdev)
regulator_unregister(drvdata->dev);
- gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
-
- kfree(drvdata->states);
- kfree(drvdata->gpios);
-
- kfree(drvdata->desc.name);
-
return 0;
}
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 5686a1335bd3..32d3f0499e2d 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -594,28 +594,30 @@ int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
/**
- * regulator_list_voltage_linear_range - List voltages for linear ranges
+ * regulator_desc_list_voltage_linear_range - List voltages for linear ranges
*
- * @rdev: Regulator device
+ * @desc: Regulator desc for regulator which volatges are to be listed
* @selector: Selector to convert into a voltage
*
* Regulators with a series of simple linear mappings between voltages
- * and selectors can set linear_ranges in the regulator descriptor and
- * then use this function as their list_voltage() operation,
+ * and selectors who have set linear_ranges in the regulator descriptor
+ * can use this function prior regulator registration to list voltages.
+ * This is useful when voltages need to be listed during device-tree
+ * parsing.
*/
-int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
- unsigned int selector)
+int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
+ unsigned int selector)
{
const struct regulator_linear_range *range;
int i;
- if (!rdev->desc->n_linear_ranges) {
- BUG_ON(!rdev->desc->n_linear_ranges);
+ if (!desc->n_linear_ranges) {
+ BUG_ON(!desc->n_linear_ranges);
return -EINVAL;
}
- for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
- range = &rdev->desc->linear_ranges[i];
+ for (i = 0; i < desc->n_linear_ranges; i++) {
+ range = &desc->linear_ranges[i];
if (!(selector >= range->min_sel &&
selector <= range->max_sel))
@@ -628,6 +630,23 @@ int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
return -EINVAL;
}
+EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range);
+
+/**
+ * regulator_list_voltage_linear_range - List voltages for linear ranges
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a series of simple linear mappings between voltages
+ * and selectors can set linear_ranges in the regulator descriptor and
+ * then use this function as their list_voltage() operation,
+ */
+int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ return regulator_desc_list_voltage_linear_range(rdev->desc, selector);
+}
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);
/**
@@ -761,3 +780,89 @@ int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
rdev->desc->active_discharge_mask, val);
}
EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);
+
+/**
+ * regulator_set_current_limit_regmap - set_current_limit for regmap users
+ *
+ * @rdev: regulator to operate on
+ * @min_uA: Lower bound for current limit
+ * @max_uA: Upper bound for current limit
+ *
+ * Regulators that use regmap for their register I/O can set curr_table,
+ * csel_reg and csel_mask fields in their descriptor and then use this
+ * as their set_current_limit operation, saving some code.
+ */
+int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ unsigned int n_currents = rdev->desc->n_current_limits;
+ int i, sel = -1;
+
+ if (n_currents == 0)
+ return -EINVAL;
+
+ if (rdev->desc->curr_table) {
+ const unsigned int *curr_table = rdev->desc->curr_table;
+ bool ascend = curr_table[n_currents - 1] > curr_table[0];
+
+ /* search for closest to maximum */
+ if (ascend) {
+ for (i = n_currents - 1; i >= 0; i--) {
+ if (min_uA <= curr_table[i] &&
+ curr_table[i] <= max_uA) {
+ sel = i;
+ break;
+ }
+ }
+ } else {
+ for (i = 0; i < n_currents; i++) {
+ if (min_uA <= curr_table[i] &&
+ curr_table[i] <= max_uA) {
+ sel = i;
+ break;
+ }
+ }
+ }
+ }
+
+ if (sel < 0)
+ return -EINVAL;
+
+ sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
+ rdev->desc->csel_mask, sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_current_limit_regmap);
+
+/**
+ * regulator_get_current_limit_regmap - get_current_limit for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * csel_reg and csel_mask fields in their descriptor and then use this
+ * as their get_current_limit operation, saving some code.
+ */
+int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
+ if (ret != 0)
+ return ret;
+
+ val &= rdev->desc->csel_mask;
+ val >>= ffs(rdev->desc->csel_mask) - 1;
+
+ if (rdev->desc->curr_table) {
+ if (val >= rdev->desc->n_current_limits)
+ return -EINVAL;
+
+ return rdev->desc->curr_table[val];
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);
diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c
index 36ae54b53814..bba24a6fdb1e 100644
--- a/drivers/regulator/hi655x-regulator.c
+++ b/drivers/regulator/hi655x-regulator.c
@@ -28,7 +28,6 @@
struct hi655x_regulator {
unsigned int disable_reg;
unsigned int status_reg;
- unsigned int ctrl_regs;
unsigned int ctrl_mask;
struct regulator_desc rdesc;
};
diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c
index 4abd8e9c81e5..6f28bba81d13 100644
--- a/drivers/regulator/isl6271a-regulator.c
+++ b/drivers/regulator/isl6271a-regulator.c
@@ -31,7 +31,6 @@
/* PMIC details */
struct isl_pmic {
struct i2c_client *client;
- struct regulator_dev *rdev[3];
struct mutex mtx;
};
@@ -66,14 +65,14 @@ static int isl6271a_set_voltage_sel(struct regulator_dev *dev,
return err;
}
-static struct regulator_ops isl_core_ops = {
+static const struct regulator_ops isl_core_ops = {
.get_voltage_sel = isl6271a_get_voltage_sel,
.set_voltage_sel = isl6271a_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
-static struct regulator_ops isl_fixed_ops = {
+static const struct regulator_ops isl_fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
};
@@ -109,6 +108,7 @@ static const struct regulator_desc isl_rd[] = {
static int isl6271a_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ struct regulator_dev *rdev;
struct regulator_config config = { };
struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
struct isl_pmic *pmic;
@@ -133,11 +133,10 @@ static int isl6271a_probe(struct i2c_client *i2c,
config.init_data = NULL;
config.driver_data = pmic;
- pmic->rdev[i] = devm_regulator_register(&i2c->dev, &isl_rd[i],
- &config);
- if (IS_ERR(pmic->rdev[i])) {
+ rdev = devm_regulator_register(&i2c->dev, &isl_rd[i], &config);
+ if (IS_ERR(rdev)) {
dev_err(&i2c->dev, "failed to register %s\n", id->name);
- return PTR_ERR(pmic->rdev[i]);
+ return PTR_ERR(rdev);
}
}
diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index 8c0e8419c43f..c876e161052a 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -258,6 +258,9 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
* Register update is required if the pin is used.
*/
gpiod = lm363x_regulator_of_get_enable_gpio(dev, id);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+
if (gpiod) {
cfg.ena_gpiod = gpiod;
@@ -265,8 +268,7 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
LM3632_EXT_EN_MASK,
LM3632_EXT_EN_MASK);
if (ret) {
- if (gpiod)
- gpiod_put(gpiod);
+ gpiod_put(gpiod);
dev_err(dev, "External pin err: %d\n", ret);
return ret;
}
diff --git a/drivers/regulator/lochnagar-regulator.c b/drivers/regulator/lochnagar-regulator.c
index 5a89e6d4b9a6..ff97cc50f2eb 100644
--- a/drivers/regulator/lochnagar-regulator.c
+++ b/drivers/regulator/lochnagar-regulator.c
@@ -194,7 +194,7 @@ static const struct regulator_desc lochnagar_regulators[] = {
.name = "VDDCORE",
.supply_name = "SYSVDD",
.type = REGULATOR_VOLTAGE,
- .n_voltages = 57,
+ .n_voltages = 66,
.ops = &lochnagar_vddcore_ops,
.id = LOCHNAGAR_VDDCORE,
@@ -226,14 +226,15 @@ static const struct of_device_id lochnagar_of_match[] = {
},
{
.compatible = "cirrus,lochnagar2-mic2vdd",
- .data = &lochnagar_regulators[LOCHNAGAR_MIC1VDD],
+ .data = &lochnagar_regulators[LOCHNAGAR_MIC2VDD],
},
{
.compatible = "cirrus,lochnagar2-vddcore",
.data = &lochnagar_regulators[LOCHNAGAR_VDDCORE],
},
- {},
+ {}
};
+MODULE_DEVICE_TABLE(of, lochnagar_of_match);
static int lochnagar_regulator_probe(struct platform_device *pdev)
{
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 204b5c5270e0..9e45112658ba 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -159,7 +159,7 @@ static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
selector << LDO_VOL_CONTR_SHIFT(ldo));
}
-static struct regulator_ops lp3971_ldo_ops = {
+static const struct regulator_ops lp3971_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3971_ldo_is_enabled,
@@ -233,7 +233,7 @@ static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
0 << BUCK_VOL_CHANGE_SHIFT(buck));
}
-static struct regulator_ops lp3971_dcdc_ops = {
+static const struct regulator_ops lp3971_dcdc_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3971_dcdc_is_enabled,
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index ff0c275f902e..fb098198b688 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -305,7 +305,7 @@ static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
return ret;
}
-static struct regulator_ops lp3972_ldo_ops = {
+static const struct regulator_ops lp3972_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3972_ldo_is_enabled,
@@ -386,7 +386,7 @@ static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
LP3972_VOL_CHANGE_FLAG_MASK, 0);
}
-static struct regulator_ops lp3972_dcdc_ops = {
+static const struct regulator_ops lp3972_dcdc_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3972_dcdc_is_enabled,
diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 38992112fd6e..ca95257ce252 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -353,64 +353,6 @@ static int lp872x_buck_get_voltage_sel(struct regulator_dev *rdev)
return val & LP872X_VOUT_M;
}
-static int lp8725_buck_set_current_limit(struct regulator_dev *rdev,
- int min_uA, int max_uA)
-{
- struct lp872x *lp = rdev_get_drvdata(rdev);
- enum lp872x_regulator_id buck = rdev_get_id(rdev);
- int i;
- u8 addr;
-
- switch (buck) {
- case LP8725_ID_BUCK1:
- addr = LP8725_BUCK1_VOUT2;
- break;
- case LP8725_ID_BUCK2:
- addr = LP8725_BUCK2_VOUT2;
- break;
- default:
- return -EINVAL;
- }
-
- for (i = ARRAY_SIZE(lp8725_buck_uA) - 1; i >= 0; i--) {
- if (lp8725_buck_uA[i] >= min_uA &&
- lp8725_buck_uA[i] <= max_uA)
- return lp872x_update_bits(lp, addr,
- LP8725_BUCK_CL_M,
- i << LP8725_BUCK_CL_S);
- }
-
- return -EINVAL;
-}
-
-static int lp8725_buck_get_current_limit(struct regulator_dev *rdev)
-{
- struct lp872x *lp = rdev_get_drvdata(rdev);
- enum lp872x_regulator_id buck = rdev_get_id(rdev);
- u8 addr, val;
- int ret;
-
- switch (buck) {
- case LP8725_ID_BUCK1:
- addr = LP8725_BUCK1_VOUT2;
- break;
- case LP8725_ID_BUCK2:
- addr = LP8725_BUCK2_VOUT2;
- break;
- default:
- return -EINVAL;
- }
-
- ret = lp872x_read_byte(lp, addr, &val);
- if (ret)
- return ret;
-
- val = (val & LP8725_BUCK_CL_M) >> LP8725_BUCK_CL_S;
-
- return (val < ARRAY_SIZE(lp8725_buck_uA)) ?
- lp8725_buck_uA[val] : -EINVAL;
-}
-
static int lp872x_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct lp872x *lp = rdev_get_drvdata(rdev);
@@ -478,7 +420,7 @@ static unsigned int lp872x_buck_get_mode(struct regulator_dev *rdev)
return val & mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
}
-static struct regulator_ops lp872x_ldo_ops = {
+static const struct regulator_ops lp872x_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -489,7 +431,7 @@ static struct regulator_ops lp872x_ldo_ops = {
.enable_time = lp872x_regulator_enable_time,
};
-static struct regulator_ops lp8720_buck_ops = {
+static const struct regulator_ops lp8720_buck_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = lp872x_buck_set_voltage_sel,
@@ -502,7 +444,7 @@ static struct regulator_ops lp8720_buck_ops = {
.get_mode = lp872x_buck_get_mode,
};
-static struct regulator_ops lp8725_buck_ops = {
+static const struct regulator_ops lp8725_buck_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = lp872x_buck_set_voltage_sel,
@@ -513,11 +455,11 @@ static struct regulator_ops lp8725_buck_ops = {
.enable_time = lp872x_regulator_enable_time,
.set_mode = lp872x_buck_set_mode,
.get_mode = lp872x_buck_get_mode,
- .set_current_limit = lp8725_buck_set_current_limit,
- .get_current_limit = lp8725_buck_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
};
-static struct regulator_desc lp8720_regulator_desc[] = {
+static const struct regulator_desc lp8720_regulator_desc[] = {
{
.name = "ldo1",
.of_match = of_match_ptr("ldo1"),
@@ -602,7 +544,7 @@ static struct regulator_desc lp8720_regulator_desc[] = {
},
};
-static struct regulator_desc lp8725_regulator_desc[] = {
+static const struct regulator_desc lp8725_regulator_desc[] = {
{
.name = "ldo1",
.of_match = of_match_ptr("ldo1"),
@@ -712,6 +654,10 @@ static struct regulator_desc lp8725_regulator_desc[] = {
.owner = THIS_MODULE,
.enable_reg = LP872X_GENERAL_CFG,
.enable_mask = LP8725_BUCK1_EN_M,
+ .curr_table = lp8725_buck_uA,
+ .n_current_limits = ARRAY_SIZE(lp8725_buck_uA),
+ .csel_reg = LP8725_BUCK1_VOUT2,
+ .csel_mask = LP8725_BUCK_CL_M,
},
{
.name = "buck2",
@@ -724,6 +670,10 @@ static struct regulator_desc lp8725_regulator_desc[] = {
.owner = THIS_MODULE,
.enable_reg = LP872X_GENERAL_CFG,
.enable_mask = LP8725_BUCK2_EN_M,
+ .curr_table = lp8725_buck_uA,
+ .n_current_limits = ARRAY_SIZE(lp8725_buck_uA),
+ .csel_reg = LP8725_BUCK2_VOUT2,
+ .csel_mask = LP8725_BUCK_CL_M,
},
};
@@ -820,7 +770,7 @@ static struct regulator_init_data
static int lp872x_regulator_register(struct lp872x *lp)
{
- struct regulator_desc *desc;
+ const struct regulator_desc *desc;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
int i;
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
index 70e3df653381..b55de293ca7a 100644
--- a/drivers/regulator/lp873x-regulator.c
+++ b/drivers/regulator/lp873x-regulator.c
@@ -39,6 +39,10 @@
.ramp_delay = _delay, \
.linear_ranges = _lr, \
.n_linear_ranges = ARRAY_SIZE(_lr), \
+ .curr_table = lp873x_buck_uA, \
+ .n_current_limits = ARRAY_SIZE(lp873x_buck_uA), \
+ .csel_reg = (_cr), \
+ .csel_mask = LP873X_BUCK0_CTRL_2_BUCK0_ILIM,\
}, \
.ctrl2_reg = _cr, \
}
@@ -61,7 +65,7 @@ static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
};
-static unsigned int lp873x_buck_ramp_delay[] = {
+static const unsigned int lp873x_buck_ramp_delay[] = {
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
};
@@ -108,45 +112,8 @@ static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,
return 0;
}
-static int lp873x_buck_set_current_limit(struct regulator_dev *rdev,
- int min_uA, int max_uA)
-{
- int id = rdev_get_id(rdev);
- struct lp873x *lp873 = rdev_get_drvdata(rdev);
- int i;
-
- for (i = ARRAY_SIZE(lp873x_buck_uA) - 1; i >= 0; i--) {
- if (lp873x_buck_uA[i] >= min_uA &&
- lp873x_buck_uA[i] <= max_uA)
- return regmap_update_bits(lp873->regmap,
- regulators[id].ctrl2_reg,
- LP873X_BUCK0_CTRL_2_BUCK0_ILIM,
- i << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM));
- }
-
- return -EINVAL;
-}
-
-static int lp873x_buck_get_current_limit(struct regulator_dev *rdev)
-{
- int id = rdev_get_id(rdev);
- struct lp873x *lp873 = rdev_get_drvdata(rdev);
- int ret;
- unsigned int val;
-
- ret = regmap_read(lp873->regmap, regulators[id].ctrl2_reg, &val);
- if (ret)
- return ret;
-
- val = (val & LP873X_BUCK0_CTRL_2_BUCK0_ILIM) >>
- __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM);
-
- return (val < ARRAY_SIZE(lp873x_buck_uA)) ?
- lp873x_buck_uA[val] : -EINVAL;
-}
-
/* Operations permitted on BUCK0, BUCK1 */
-static struct regulator_ops lp873x_buck01_ops = {
+static const struct regulator_ops lp873x_buck01_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -156,12 +123,12 @@ static struct regulator_ops lp873x_buck01_ops = {
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = lp873x_buck_set_ramp_delay,
- .set_current_limit = lp873x_buck_set_current_limit,
- .get_current_limit = lp873x_buck_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
};
/* Operations permitted on LDO0 and LDO1 */
-static struct regulator_ops lp873x_ldo01_ops = {
+static const struct regulator_ops lp873x_ldo01_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index 244822bb63cd..14fd38807134 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -315,7 +315,7 @@ out_i2c_error:
.vsel_mask = LP8755_BUCK_VOUT_M,\
}
-static struct regulator_desc lp8755_regulators[] = {
+static const struct regulator_desc lp8755_regulators[] = {
lp8755_buck_desc(0),
lp8755_buck_desc(1),
lp8755_buck_desc(2),
@@ -386,7 +386,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
if (ret < 0)
goto err_i2c;
- /* send OCP event to all regualtor devices */
+ /* send OCP event to all regulator devices */
if ((flag1 & 0x01) && (pchip->irqmask & 0x01))
for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
if (pchip->rdev[icnt] != NULL)
@@ -394,7 +394,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
LP8755_EVENT_OCP,
NULL);
- /* send OVP event to all regualtor devices */
+ /* send OVP event to all regulator devices */
if ((flag1 & 0x02) && (pchip->irqmask & 0x02))
for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
if (pchip->rdev[icnt] != NULL)
diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c
index c192357d1dea..4ed41731a5b1 100644
--- a/drivers/regulator/lp87565-regulator.c
+++ b/drivers/regulator/lp87565-regulator.c
@@ -51,7 +51,7 @@ static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
};
-static unsigned int lp87565_buck_ramp_delay[] = {
+static const unsigned int lp87565_buck_ramp_delay[] = {
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
};
@@ -140,7 +140,7 @@ static int lp87565_buck_get_current_limit(struct regulator_dev *rdev)
}
/* Operations permitted on BUCK0, BUCK1 */
-static struct regulator_ops lp87565_buck_ops = {
+static const struct regulator_ops lp87565_buck_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index ec46290b647e..a7d30550bb5f 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -95,12 +95,10 @@ struct lp8788_buck {
void *dvs;
};
-/* BUCK 1 ~ 4 voltage table */
-static const int lp8788_buck_vtbl[] = {
- 500000, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
- 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
- 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000,
- 1950000, 2000000,
+/* BUCK 1 ~ 4 voltage ranges */
+static const struct regulator_linear_range buck_volt_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
+ REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
};
static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
@@ -345,8 +343,8 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
}
static const struct regulator_ops lp8788_buck12_ops = {
- .list_voltage = regulator_list_voltage_table,
- .map_voltage = regulator_map_voltage_ascend,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = lp8788_buck12_set_voltage_sel,
.get_voltage_sel = lp8788_buck12_get_voltage_sel,
.enable = regulator_enable_regmap,
@@ -358,8 +356,8 @@ static const struct regulator_ops lp8788_buck12_ops = {
};
static const struct regulator_ops lp8788_buck34_ops = {
- .list_voltage = regulator_list_voltage_table,
- .map_voltage = regulator_map_voltage_ascend,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
@@ -370,13 +368,14 @@ static const struct regulator_ops lp8788_buck34_ops = {
.get_mode = lp8788_buck_get_mode,
};
-static struct regulator_desc lp8788_buck_desc[] = {
+static const struct regulator_desc lp8788_buck_desc[] = {
{
.name = "buck1",
.id = BUCK1,
.ops = &lp8788_buck12_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
@@ -386,8 +385,9 @@ static struct regulator_desc lp8788_buck_desc[] = {
.name = "buck2",
.id = BUCK2,
.ops = &lp8788_buck12_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
@@ -397,8 +397,9 @@ static struct regulator_desc lp8788_buck_desc[] = {
.name = "buck3",
.id = BUCK3,
.ops = &lp8788_buck34_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK3_VOUT,
@@ -410,8 +411,9 @@ static struct regulator_desc lp8788_buck_desc[] = {
.name = "buck4",
.id = BUCK4,
.ops = &lp8788_buck34_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK4_VOUT,
diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index 2ee22e7ea675..a2ef146e6b3a 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -186,7 +186,7 @@ static const struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
.enable_time = lp8788_ldo_enable_time,
};
-static struct regulator_desc lp8788_dldo_desc[] = {
+static const struct regulator_desc lp8788_dldo_desc[] = {
{
.name = "dldo1",
.id = DLDO1,
@@ -343,7 +343,7 @@ static struct regulator_desc lp8788_dldo_desc[] = {
},
};
-static struct regulator_desc lp8788_aldo_desc[] = {
+static const struct regulator_desc lp8788_aldo_desc[] = {
{
.name = "aldo1",
.id = ALDO1,
diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c
index 71fd0f2a4b76..e6d66e492b85 100644
--- a/drivers/regulator/ltc3676.c
+++ b/drivers/regulator/ltc3676.c
@@ -241,61 +241,10 @@ static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
};
-static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg)
+static bool ltc3676_readable_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
- case LTC3676_IRQSTAT:
- case LTC3676_BUCK1:
- case LTC3676_BUCK2:
- case LTC3676_BUCK3:
- case LTC3676_BUCK4:
- case LTC3676_LDOA:
- case LTC3676_LDOB:
- case LTC3676_SQD1:
- case LTC3676_SQD2:
- case LTC3676_CNTRL:
- case LTC3676_DVB1A:
- case LTC3676_DVB1B:
- case LTC3676_DVB2A:
- case LTC3676_DVB2B:
- case LTC3676_DVB3A:
- case LTC3676_DVB3B:
- case LTC3676_DVB4A:
- case LTC3676_DVB4B:
- case LTC3676_MSKIRQ:
- case LTC3676_MSKPG:
- case LTC3676_USER:
- case LTC3676_HRST:
- case LTC3676_CLIRQ:
- return true;
- }
- return false;
-}
-
-static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
-{
- switch (reg) {
- case LTC3676_IRQSTAT:
- case LTC3676_BUCK1:
- case LTC3676_BUCK2:
- case LTC3676_BUCK3:
- case LTC3676_BUCK4:
- case LTC3676_LDOA:
- case LTC3676_LDOB:
- case LTC3676_SQD1:
- case LTC3676_SQD2:
- case LTC3676_CNTRL:
- case LTC3676_DVB1A:
- case LTC3676_DVB1B:
- case LTC3676_DVB2A:
- case LTC3676_DVB2B:
- case LTC3676_DVB3A:
- case LTC3676_DVB3B:
- case LTC3676_DVB4A:
- case LTC3676_DVB4B:
- case LTC3676_MSKIRQ:
- case LTC3676_MSKPG:
- case LTC3676_USER:
+ case LTC3676_BUCK1 ... LTC3676_IRQSTAT:
case LTC3676_HRST:
case LTC3676_CLIRQ:
return true;
@@ -306,9 +255,7 @@ static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
- case LTC3676_IRQSTAT:
- case LTC3676_PGSTATL:
- case LTC3676_PGSTATRT:
+ case LTC3676_IRQSTAT ... LTC3676_PGSTATRT:
return true;
}
return false;
@@ -317,8 +264,8 @@ static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
static const struct regmap_config ltc3676_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
- .writeable_reg = ltc3676_writeable_reg,
- .readable_reg = ltc3676_readable_reg,
+ .writeable_reg = ltc3676_readable_writeable_reg,
+ .readable_reg = ltc3676_readable_writeable_reg,
.volatile_reg = ltc3676_volatile_reg,
.max_register = LTC3676_CLIRQ,
.use_single_read = true,
@@ -442,5 +389,5 @@ static struct i2c_driver ltc3676_driver = {
module_i2c_driver(ltc3676_driver);
MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
-MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376");
+MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC3676");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c
index bc7f4751bf9c..85a88a9e4d42 100644
--- a/drivers/regulator/max14577-regulator.c
+++ b/drivers/regulator/max14577-regulator.c
@@ -324,4 +324,3 @@ module_exit(max14577_regulator_exit);
MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:max14577-regulator");
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
index b94e3a721721..1607ac673e44 100644
--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -1,7 +1,7 @@
/*
* Maxim MAX77620 Regulator driver
*
- * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2016-2018, NVIDIA CORPORATION. All rights reserved.
*
* Author: Mallikarjun Kasoju <mkasoju@nvidia.com>
* Laxman Dewangan <ldewangan@nvidia.com>
@@ -690,6 +690,7 @@ static const struct regulator_ops max77620_regulator_ops = {
.active_discharge_mask = MAX77620_SD_CFG1_ADE_MASK, \
.active_discharge_reg = MAX77620_REG_##_id##_CFG, \
.type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
}, \
}
@@ -721,6 +722,7 @@ static const struct regulator_ops max77620_regulator_ops = {
.active_discharge_mask = MAX77620_LDO_CFG2_ADE_MASK, \
.active_discharge_reg = MAX77620_REG_##_id##_CFG2, \
.type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
}, \
}
@@ -803,6 +805,14 @@ static int max77620_regulator_probe(struct platform_device *pdev)
rdesc = &rinfo[id].desc;
pmic->rinfo[id] = &max77620_regs_info[id];
pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+ pmic->reg_pdata[id].active_fps_src = -1;
+ pmic->reg_pdata[id].active_fps_pd_slot = -1;
+ pmic->reg_pdata[id].active_fps_pu_slot = -1;
+ pmic->reg_pdata[id].suspend_fps_src = -1;
+ pmic->reg_pdata[id].suspend_fps_pd_slot = -1;
+ pmic->reg_pdata[id].suspend_fps_pu_slot = -1;
+ pmic->reg_pdata[id].power_ok = -1;
+ pmic->reg_pdata[id].ramp_rate_setting = -1;
ret = max77620_read_slew_rate(pmic, id);
if (ret < 0)
diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c
new file mode 100644
index 000000000000..31ebf34b01ec
--- /dev/null
+++ b/drivers/regulator/max77650-regulator.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// Regulator driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/of.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#define MAX77650_REGULATOR_EN_CTRL_MASK GENMASK(3, 0)
+#define MAX77650_REGULATOR_EN_CTRL_BITS(_reg) \
+ ((_reg) & MAX77650_REGULATOR_EN_CTRL_MASK)
+#define MAX77650_REGULATOR_ENABLED GENMASK(2, 1)
+#define MAX77650_REGULATOR_DISABLED BIT(2)
+
+#define MAX77650_REGULATOR_V_LDO_MASK GENMASK(6, 0)
+#define MAX77650_REGULATOR_V_SBB_MASK GENMASK(5, 0)
+
+#define MAX77650_REGULATOR_AD_MASK BIT(3)
+#define MAX77650_REGULATOR_AD_DISABLED 0x00
+#define MAX77650_REGULATOR_AD_ENABLED BIT(3)
+
+#define MAX77650_REGULATOR_CURR_LIM_MASK GENMASK(7, 6)
+
+enum {
+ MAX77650_REGULATOR_ID_LDO = 0,
+ MAX77650_REGULATOR_ID_SBB0,
+ MAX77650_REGULATOR_ID_SBB1,
+ MAX77650_REGULATOR_ID_SBB2,
+ MAX77650_REGULATOR_NUM_REGULATORS,
+};
+
+struct max77650_regulator_desc {
+ struct regulator_desc desc;
+ unsigned int regA;
+ unsigned int regB;
+};
+
+static const u32 max77651_sbb1_regulator_volt_table[] = {
+ 2400000, 3200000, 4000000, 4800000,
+ 2450000, 3250000, 4050000, 4850000,
+ 2500000, 3300000, 4100000, 4900000,
+ 2550000, 3350000, 4150000, 4950000,
+ 2600000, 3400000, 4200000, 5000000,
+ 2650000, 3450000, 4250000, 5050000,
+ 2700000, 3500000, 4300000, 5100000,
+ 2750000, 3550000, 4350000, 5150000,
+ 2800000, 3600000, 4400000, 5200000,
+ 2850000, 3650000, 4450000, 5250000,
+ 2900000, 3700000, 4500000, 0,
+ 2950000, 3750000, 4550000, 0,
+ 3000000, 3800000, 4600000, 0,
+ 3050000, 3850000, 4650000, 0,
+ 3100000, 3900000, 4700000, 0,
+ 3150000, 3950000, 4750000, 0,
+};
+
+#define MAX77651_REGULATOR_SBB1_SEL_DEC(_val) \
+ (((_val & 0x3c) >> 2) | ((_val & 0x03) << 4))
+#define MAX77651_REGULATOR_SBB1_SEL_ENC(_val) \
+ (((_val & 0x30) >> 4) | ((_val & 0x0f) << 2))
+
+#define MAX77650_REGULATOR_SBB1_SEL_DECR(_val) \
+ do { \
+ _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \
+ _val--; \
+ _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
+ } while (0)
+
+#define MAX77650_REGULATOR_SBB1_SEL_INCR(_val) \
+ do { \
+ _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \
+ _val++; \
+ _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
+ } while (0)
+
+static const unsigned int max77650_current_limit_table[] = {
+ 1000000, 866000, 707000, 500000,
+};
+
+static int max77650_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct max77650_regulator_desc *rdesc;
+ struct regmap *map;
+ int val, rv, en;
+
+ rdesc = rdev_get_drvdata(rdev);
+ map = rdev_get_regmap(rdev);
+
+ rv = regmap_read(map, rdesc->regB, &val);
+ if (rv)
+ return rv;
+
+ en = MAX77650_REGULATOR_EN_CTRL_BITS(val);
+
+ return en != MAX77650_REGULATOR_DISABLED;
+}
+
+static int max77650_regulator_enable(struct regulator_dev *rdev)
+{
+ struct max77650_regulator_desc *rdesc;
+ struct regmap *map;
+
+ rdesc = rdev_get_drvdata(rdev);
+ map = rdev_get_regmap(rdev);
+
+ return regmap_update_bits(map, rdesc->regB,
+ MAX77650_REGULATOR_EN_CTRL_MASK,
+ MAX77650_REGULATOR_ENABLED);
+}
+
+static int max77650_regulator_disable(struct regulator_dev *rdev)
+{
+ struct max77650_regulator_desc *rdesc;
+ struct regmap *map;
+
+ rdesc = rdev_get_drvdata(rdev);
+ map = rdev_get_regmap(rdev);
+
+ return regmap_update_bits(map, rdesc->regB,
+ MAX77650_REGULATOR_EN_CTRL_MASK,
+ MAX77650_REGULATOR_DISABLED);
+}
+
+static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ int rv = 0, curr, diff;
+ bool ascending;
+
+ /*
+ * If the regulator is disabled, we can program the desired
+ * voltage right away.
+ */
+ if (!max77650_regulator_is_enabled(rdev))
+ return regulator_set_voltage_sel_regmap(rdev, sel);
+
+ /*
+ * Otherwise we need to manually ramp the output voltage up/down
+ * one step at a time.
+ */
+
+ curr = regulator_get_voltage_sel_regmap(rdev);
+ if (curr < 0)
+ return curr;
+
+ diff = curr - sel;
+ if (diff == 0)
+ return 0; /* Already there. */
+ else if (diff > 0)
+ ascending = false;
+ else
+ ascending = true;
+
+ /*
+ * Make sure we'll get to the right voltage and break the loop even if
+ * the selector equals 0.
+ */
+ for (ascending ? curr++ : curr--;; ascending ? curr++ : curr--) {
+ rv = regulator_set_voltage_sel_regmap(rdev, curr);
+ if (rv)
+ return rv;
+
+ if (curr == sel)
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Special case: non-linear voltage table for max77651 SBB1 - software
+ * must ensure the voltage is ramped in 50mV increments.
+ */
+static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ int rv = 0, curr, vcurr, vdest, vdiff;
+
+ /*
+ * If the regulator is disabled, we can program the desired
+ * voltage right away.
+ */
+ if (!max77650_regulator_is_enabled(rdev))
+ return regulator_set_voltage_sel_regmap(rdev, sel);
+
+ curr = regulator_get_voltage_sel_regmap(rdev);
+ if (curr < 0)
+ return curr;
+
+ if (curr == sel)
+ return 0; /* Already there. */
+
+ vcurr = max77651_sbb1_regulator_volt_table[curr];
+ vdest = max77651_sbb1_regulator_volt_table[sel];
+ vdiff = vcurr - vdest;
+
+ for (;;) {
+ if (vdiff > 0)
+ MAX77650_REGULATOR_SBB1_SEL_DECR(curr);
+ else
+ MAX77650_REGULATOR_SBB1_SEL_INCR(curr);
+
+ rv = regulator_set_voltage_sel_regmap(rdev, curr);
+ if (rv)
+ return rv;
+
+ if (curr == sel)
+ break;
+ };
+
+ return 0;
+}
+
+static const struct regulator_ops max77650_regulator_LDO_ops = {
+ .is_enabled = max77650_regulator_is_enabled,
+ .enable = max77650_regulator_enable,
+ .disable = max77650_regulator_disable,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = max77650_regulator_set_voltage_sel,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_ops max77650_regulator_SBB_ops = {
+ .is_enabled = max77650_regulator_is_enabled,
+ .enable = max77650_regulator_enable,
+ .disable = max77650_regulator_disable,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = max77650_regulator_set_voltage_sel,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+/* Special case for max77651 SBB1 - non-linear voltage mapping. */
+static const struct regulator_ops max77651_SBB1_regulator_ops = {
+ .is_enabled = max77650_regulator_is_enabled,
+ .enable = max77650_regulator_enable,
+ .disable = max77650_regulator_disable,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+static struct max77650_regulator_desc max77650_LDO_desc = {
+ .desc = {
+ .name = "ldo",
+ .of_match = of_match_ptr("ldo"),
+ .regulators_node = of_match_ptr("regulators"),
+ .supply_name = "in-ldo",
+ .id = MAX77650_REGULATOR_ID_LDO,
+ .ops = &max77650_regulator_LDO_ops,
+ .min_uV = 1350000,
+ .uV_step = 12500,
+ .n_voltages = 128,
+ .vsel_mask = MAX77650_REGULATOR_V_LDO_MASK,
+ .vsel_reg = MAX77650_REG_CNFG_LDO_A,
+ .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
+ .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
+ .active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
+ .active_discharge_reg = MAX77650_REG_CNFG_LDO_B,
+ .enable_time = 100,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .regA = MAX77650_REG_CNFG_LDO_A,
+ .regB = MAX77650_REG_CNFG_LDO_B,
+};
+
+static struct max77650_regulator_desc max77650_SBB0_desc = {
+ .desc = {
+ .name = "sbb0",
+ .of_match = of_match_ptr("sbb0"),
+ .regulators_node = of_match_ptr("regulators"),
+ .supply_name = "in-sbb0",
+ .id = MAX77650_REGULATOR_ID_SBB0,
+ .ops = &max77650_regulator_SBB_ops,
+ .min_uV = 800000,
+ .uV_step = 25000,
+ .n_voltages = 64,
+ .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
+ .vsel_reg = MAX77650_REG_CNFG_SBB0_A,
+ .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
+ .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
+ .active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
+ .active_discharge_reg = MAX77650_REG_CNFG_SBB0_B,
+ .enable_time = 100,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB0_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
+ },
+ .regA = MAX77650_REG_CNFG_SBB0_A,
+ .regB = MAX77650_REG_CNFG_SBB0_B,
+};
+
+static struct max77650_regulator_desc max77650_SBB1_desc = {
+ .desc = {
+ .name = "sbb1",
+ .of_match = of_match_ptr("sbb1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .supply_name = "in-sbb1",
+ .id = MAX77650_REGULATOR_ID_SBB1,
+ .ops = &max77650_regulator_SBB_ops,
+ .min_uV = 800000,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
+ .vsel_reg = MAX77650_REG_CNFG_SBB1_A,
+ .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
+ .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
+ .active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
+ .active_discharge_reg = MAX77650_REG_CNFG_SBB1_B,
+ .enable_time = 100,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB1_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
+ },
+ .regA = MAX77650_REG_CNFG_SBB1_A,
+ .regB = MAX77650_REG_CNFG_SBB1_B,
+};
+
+static struct max77650_regulator_desc max77651_SBB1_desc = {
+ .desc = {
+ .name = "sbb1",
+ .of_match = of_match_ptr("sbb1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .supply_name = "in-sbb1",
+ .id = MAX77650_REGULATOR_ID_SBB1,
+ .ops = &max77651_SBB1_regulator_ops,
+ .volt_table = max77651_sbb1_regulator_volt_table,
+ .n_voltages = ARRAY_SIZE(max77651_sbb1_regulator_volt_table),
+ .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
+ .vsel_reg = MAX77650_REG_CNFG_SBB1_A,
+ .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
+ .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
+ .active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
+ .active_discharge_reg = MAX77650_REG_CNFG_SBB1_B,
+ .enable_time = 100,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB1_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
+ },
+ .regA = MAX77650_REG_CNFG_SBB1_A,
+ .regB = MAX77650_REG_CNFG_SBB1_B,
+};
+
+static struct max77650_regulator_desc max77650_SBB2_desc = {
+ .desc = {
+ .name = "sbb2",
+ .of_match = of_match_ptr("sbb2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .supply_name = "in-sbb0",
+ .id = MAX77650_REGULATOR_ID_SBB2,
+ .ops = &max77650_regulator_SBB_ops,
+ .min_uV = 800000,
+ .uV_step = 50000,
+ .n_voltages = 64,
+ .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
+ .vsel_reg = MAX77650_REG_CNFG_SBB2_A,
+ .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
+ .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
+ .active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
+ .active_discharge_reg = MAX77650_REG_CNFG_SBB2_B,
+ .enable_time = 100,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB2_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
+ },
+ .regA = MAX77650_REG_CNFG_SBB2_A,
+ .regB = MAX77650_REG_CNFG_SBB2_B,
+};
+
+static struct max77650_regulator_desc max77651_SBB2_desc = {
+ .desc = {
+ .name = "sbb2",
+ .of_match = of_match_ptr("sbb2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .supply_name = "in-sbb0",
+ .id = MAX77650_REGULATOR_ID_SBB2,
+ .ops = &max77650_regulator_SBB_ops,
+ .min_uV = 2400000,
+ .uV_step = 50000,
+ .n_voltages = 64,
+ .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
+ .vsel_reg = MAX77650_REG_CNFG_SBB2_A,
+ .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
+ .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
+ .active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
+ .active_discharge_reg = MAX77650_REG_CNFG_SBB2_B,
+ .enable_time = 100,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB2_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
+ },
+ .regA = MAX77650_REG_CNFG_SBB2_A,
+ .regB = MAX77650_REG_CNFG_SBB2_B,
+};
+
+static int max77650_regulator_probe(struct platform_device *pdev)
+{
+ struct max77650_regulator_desc **rdescs;
+ struct max77650_regulator_desc *rdesc;
+ struct regulator_config config = { };
+ struct device *dev, *parent;
+ struct regulator_dev *rdev;
+ struct regmap *map;
+ unsigned int val;
+ int i, rv;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+
+ if (!dev->of_node)
+ dev->of_node = parent->of_node;
+
+ rdescs = devm_kcalloc(dev, MAX77650_REGULATOR_NUM_REGULATORS,
+ sizeof(*rdescs), GFP_KERNEL);
+ if (!rdescs)
+ return -ENOMEM;
+
+ map = dev_get_regmap(parent, NULL);
+ if (!map)
+ return -ENODEV;
+
+ rv = regmap_read(map, MAX77650_REG_CID, &val);
+ if (rv)
+ return rv;
+
+ rdescs[MAX77650_REGULATOR_ID_LDO] = &max77650_LDO_desc;
+ rdescs[MAX77650_REGULATOR_ID_SBB0] = &max77650_SBB0_desc;
+
+ switch (MAX77650_CID_BITS(val)) {
+ case MAX77650_CID_77650A:
+ case MAX77650_CID_77650C:
+ rdescs[MAX77650_REGULATOR_ID_SBB1] = &max77650_SBB1_desc;
+ rdescs[MAX77650_REGULATOR_ID_SBB2] = &max77650_SBB2_desc;
+ break;
+ case MAX77650_CID_77651A:
+ case MAX77650_CID_77651B:
+ rdescs[MAX77650_REGULATOR_ID_SBB1] = &max77651_SBB1_desc;
+ rdescs[MAX77650_REGULATOR_ID_SBB2] = &max77651_SBB2_desc;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ config.dev = parent;
+
+ for (i = 0; i < MAX77650_REGULATOR_NUM_REGULATORS; i++) {
+ rdesc = rdescs[i];
+ config.driver_data = rdesc;
+
+ rdev = devm_regulator_register(dev, &rdesc->desc, &config);
+ if (IS_ERR(rdev))
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver max77650_regulator_driver = {
+ .driver = {
+ .name = "max77650-regulator",
+ },
+ .probe = max77650_regulator_probe,
+};
+module_platform_driver(max77650_regulator_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 regulator driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index c30cf5c9f2de..ea7b50397300 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -248,9 +248,9 @@ static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev,
unsigned int ramp_value;
if (id > MAX77802_BUCK4) {
- dev_warn(&rdev->dev,
- "%s: regulator: ramp delay not supported\n",
- rdev->desc->name);
+ dev_warn(&rdev->dev,
+ "%s: regulator: ramp delay not supported\n",
+ rdev->desc->name);
return -EINVAL;
}
ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit,
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 8fd1adc9c9a9..ab558b26cd7c 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -226,69 +226,69 @@ static const unsigned int mc13783_pwgtdrv_val[] = {
5500000,
};
-static struct regulator_ops mc13783_gpo_regulator_ops;
+static const struct regulator_ops mc13783_gpo_regulator_ops;
-#define MC13783_DEFINE(prefix, name, reg, vsel_reg, voltages) \
- MC13xxx_DEFINE(MC13783_REG_, name, reg, vsel_reg, voltages, \
+#define MC13783_DEFINE(prefix, name, node, reg, vsel_reg, voltages) \
+ MC13xxx_DEFINE(MC13783_REG_, name, node, reg, vsel_reg, voltages, \
mc13xxx_regulator_ops)
-#define MC13783_FIXED_DEFINE(prefix, name, reg, voltages) \
- MC13xxx_FIXED_DEFINE(MC13783_REG_, name, reg, voltages, \
+#define MC13783_FIXED_DEFINE(prefix, name, node, reg, voltages) \
+ MC13xxx_FIXED_DEFINE(MC13783_REG_, name, node, reg, voltages, \
mc13xxx_fixed_regulator_ops)
-#define MC13783_GPO_DEFINE(prefix, name, reg, voltages) \
- MC13xxx_GPO_DEFINE(MC13783_REG_, name, reg, voltages, \
+#define MC13783_GPO_DEFINE(prefix, name, node, reg, voltages) \
+ MC13xxx_GPO_DEFINE(MC13783_REG_, name, node, reg, voltages, \
mc13783_gpo_regulator_ops)
-#define MC13783_DEFINE_SW(_name, _reg, _vsel_reg, _voltages) \
- MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages)
-#define MC13783_DEFINE_REGU(_name, _reg, _vsel_reg, _voltages) \
- MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages)
+#define MC13783_DEFINE_SW(_name, _node, _reg, _vsel_reg, _voltages) \
+ MC13783_DEFINE(REG, _name, _node, _reg, _vsel_reg, _voltages)
+#define MC13783_DEFINE_REGU(_name, _node, _reg, _vsel_reg, _voltages) \
+ MC13783_DEFINE(REG, _name, _node, _reg, _vsel_reg, _voltages)
static struct mc13xxx_regulator mc13783_regulators[] = {
- MC13783_DEFINE_SW(SW1A, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val),
- MC13783_DEFINE_SW(SW1B, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val),
- MC13783_DEFINE_SW(SW2A, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val),
- MC13783_DEFINE_SW(SW2B, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val),
- MC13783_DEFINE_SW(SW3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val),
-
- MC13783_FIXED_DEFINE(REG, VAUDIO, REGULATORMODE0, mc13783_vaudio_val),
- MC13783_FIXED_DEFINE(REG, VIOHI, REGULATORMODE0, mc13783_viohi_val),
- MC13783_DEFINE_REGU(VIOLO, REGULATORMODE0, REGULATORSETTING0,
+ MC13783_DEFINE_SW(SW1A, sw1a, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val),
+ MC13783_DEFINE_SW(SW1B, sw1b, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val),
+ MC13783_DEFINE_SW(SW2A, sw2a, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val),
+ MC13783_DEFINE_SW(SW2B, sw2b, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val),
+ MC13783_DEFINE_SW(SW3, sw3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val),
+
+ MC13783_FIXED_DEFINE(REG, VAUDIO, vaudio, REGULATORMODE0, mc13783_vaudio_val),
+ MC13783_FIXED_DEFINE(REG, VIOHI, viohi, REGULATORMODE0, mc13783_viohi_val),
+ MC13783_DEFINE_REGU(VIOLO, violo, REGULATORMODE0, REGULATORSETTING0,
mc13783_violo_val),
- MC13783_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VDIG, vdig, REGULATORMODE0, REGULATORSETTING0,
mc13783_vdig_val),
- MC13783_DEFINE_REGU(VGEN, REGULATORMODE0, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VGEN, vgen, REGULATORMODE0, REGULATORSETTING0,
mc13783_vgen_val),
- MC13783_DEFINE_REGU(VRFDIG, REGULATORMODE0, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VRFDIG, vrfdig, REGULATORMODE0, REGULATORSETTING0,
mc13783_vrfdig_val),
- MC13783_DEFINE_REGU(VRFREF, REGULATORMODE0, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VRFREF, vrfref, REGULATORMODE0, REGULATORSETTING0,
mc13783_vrfref_val),
- MC13783_DEFINE_REGU(VRFCP, REGULATORMODE0, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VRFCP, vrfcp, REGULATORMODE0, REGULATORSETTING0,
mc13783_vrfcp_val),
- MC13783_DEFINE_REGU(VSIM, REGULATORMODE1, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VSIM, vsim, REGULATORMODE1, REGULATORSETTING0,
mc13783_vsim_val),
- MC13783_DEFINE_REGU(VESIM, REGULATORMODE1, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VESIM, vesim, REGULATORMODE1, REGULATORSETTING0,
mc13783_vesim_val),
- MC13783_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0,
+ MC13783_DEFINE_REGU(VCAM, vcam, REGULATORMODE1, REGULATORSETTING0,
mc13783_vcam_val),
- MC13783_FIXED_DEFINE(REG, VRFBG, REGULATORMODE1, mc13783_vrfbg_val),
- MC13783_DEFINE_REGU(VVIB, REGULATORMODE1, REGULATORSETTING1,
+ MC13783_FIXED_DEFINE(REG, VRFBG, vrfbg, REGULATORMODE1, mc13783_vrfbg_val),
+ MC13783_DEFINE_REGU(VVIB, vvib, REGULATORMODE1, REGULATORSETTING1,
mc13783_vvib_val),
- MC13783_DEFINE_REGU(VRF1, REGULATORMODE1, REGULATORSETTING1,
+ MC13783_DEFINE_REGU(VRF1, vrf1, REGULATORMODE1, REGULATORSETTING1,
mc13783_vrf_val),
- MC13783_DEFINE_REGU(VRF2, REGULATORMODE1, REGULATORSETTING1,
+ MC13783_DEFINE_REGU(VRF2, vrf2, REGULATORMODE1, REGULATORSETTING1,
mc13783_vrf_val),
- MC13783_DEFINE_REGU(VMMC1, REGULATORMODE1, REGULATORSETTING1,
+ MC13783_DEFINE_REGU(VMMC1, vmmc1, REGULATORMODE1, REGULATORSETTING1,
mc13783_vmmc_val),
- MC13783_DEFINE_REGU(VMMC2, REGULATORMODE1, REGULATORSETTING1,
+ MC13783_DEFINE_REGU(VMMC2, vmmc2, REGULATORMODE1, REGULATORSETTING1,
mc13783_vmmc_val),
- MC13783_GPO_DEFINE(REG, GPO1, POWERMISC, mc13783_gpo_val),
- MC13783_GPO_DEFINE(REG, GPO2, POWERMISC, mc13783_gpo_val),
- MC13783_GPO_DEFINE(REG, GPO3, POWERMISC, mc13783_gpo_val),
- MC13783_GPO_DEFINE(REG, GPO4, POWERMISC, mc13783_gpo_val),
- MC13783_GPO_DEFINE(REG, PWGT1SPI, POWERMISC, mc13783_pwgtdrv_val),
- MC13783_GPO_DEFINE(REG, PWGT2SPI, POWERMISC, mc13783_pwgtdrv_val),
+ MC13783_GPO_DEFINE(REG, GPO1, gpo1, POWERMISC, mc13783_gpo_val),
+ MC13783_GPO_DEFINE(REG, GPO2, gpo1, POWERMISC, mc13783_gpo_val),
+ MC13783_GPO_DEFINE(REG, GPO3, gpo1, POWERMISC, mc13783_gpo_val),
+ MC13783_GPO_DEFINE(REG, GPO4, gpo1, POWERMISC, mc13783_gpo_val),
+ MC13783_GPO_DEFINE(REG, PWGT1SPI, pwgt1spi, POWERMISC, mc13783_pwgtdrv_val),
+ MC13783_GPO_DEFINE(REG, PWGT2SPI, pwgt2spi, POWERMISC, mc13783_pwgtdrv_val),
};
static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
@@ -380,7 +380,7 @@ static int mc13783_gpo_regulator_is_enabled(struct regulator_dev *rdev)
return (val & mc13xxx_regulators[id].enable_bit) != 0;
}
-static struct regulator_ops mc13783_gpo_regulator_ops = {
+static const struct regulator_ops mc13783_gpo_regulator_ops = {
.enable = mc13783_gpo_regulator_enable,
.disable = mc13783_gpo_regulator_disable,
.is_enabled = mc13783_gpo_regulator_is_enabled,
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index f3fba1cc1379..a731e826a037 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -242,61 +242,61 @@ static const unsigned int mc13892_pwgtdrv[] = {
5000000,
};
-static struct regulator_ops mc13892_gpo_regulator_ops;
-static struct regulator_ops mc13892_sw_regulator_ops;
+static const struct regulator_ops mc13892_gpo_regulator_ops;
+static const struct regulator_ops mc13892_sw_regulator_ops;
-#define MC13892_FIXED_DEFINE(name, reg, voltages) \
- MC13xxx_FIXED_DEFINE(MC13892_, name, reg, voltages, \
+#define MC13892_FIXED_DEFINE(name, node, reg, voltages) \
+ MC13xxx_FIXED_DEFINE(MC13892_, name, node, reg, voltages, \
mc13xxx_fixed_regulator_ops)
-#define MC13892_GPO_DEFINE(name, reg, voltages) \
- MC13xxx_GPO_DEFINE(MC13892_, name, reg, voltages, \
+#define MC13892_GPO_DEFINE(name, node, reg, voltages) \
+ MC13xxx_GPO_DEFINE(MC13892_, name, node, reg, voltages, \
mc13892_gpo_regulator_ops)
-#define MC13892_SW_DEFINE(name, reg, vsel_reg, voltages) \
- MC13xxx_DEFINE(MC13892_, name, reg, vsel_reg, voltages, \
+#define MC13892_SW_DEFINE(name, node, reg, vsel_reg, voltages) \
+ MC13xxx_DEFINE(MC13892_, name, node, reg, vsel_reg, voltages, \
mc13892_sw_regulator_ops)
-#define MC13892_DEFINE_REGU(name, reg, vsel_reg, voltages) \
- MC13xxx_DEFINE(MC13892_, name, reg, vsel_reg, voltages, \
+#define MC13892_DEFINE_REGU(name, node, reg, vsel_reg, voltages) \
+ MC13xxx_DEFINE(MC13892_, name, node, reg, vsel_reg, voltages, \
mc13xxx_regulator_ops)
static struct mc13xxx_regulator mc13892_regulators[] = {
- MC13892_DEFINE_REGU(VCOINCELL, POWERCTL0, POWERCTL0, mc13892_vcoincell),
- MC13892_SW_DEFINE(SW1, SWITCHERS0, SWITCHERS0, mc13892_sw1),
- MC13892_SW_DEFINE(SW2, SWITCHERS1, SWITCHERS1, mc13892_sw),
- MC13892_SW_DEFINE(SW3, SWITCHERS2, SWITCHERS2, mc13892_sw),
- MC13892_SW_DEFINE(SW4, SWITCHERS3, SWITCHERS3, mc13892_sw),
- MC13892_FIXED_DEFINE(SWBST, SWITCHERS5, mc13892_swbst),
- MC13892_FIXED_DEFINE(VIOHI, REGULATORMODE0, mc13892_viohi),
- MC13892_DEFINE_REGU(VPLL, REGULATORMODE0, REGULATORSETTING0,
+ MC13892_DEFINE_REGU(VCOINCELL, vcoincell, POWERCTL0, POWERCTL0, mc13892_vcoincell),
+ MC13892_SW_DEFINE(SW1, sw1, SWITCHERS0, SWITCHERS0, mc13892_sw1),
+ MC13892_SW_DEFINE(SW2, sw2, SWITCHERS1, SWITCHERS1, mc13892_sw),
+ MC13892_SW_DEFINE(SW3, sw3, SWITCHERS2, SWITCHERS2, mc13892_sw),
+ MC13892_SW_DEFINE(SW4, sw4, SWITCHERS3, SWITCHERS3, mc13892_sw),
+ MC13892_FIXED_DEFINE(SWBST, swbst, SWITCHERS5, mc13892_swbst),
+ MC13892_FIXED_DEFINE(VIOHI, viohi, REGULATORMODE0, mc13892_viohi),
+ MC13892_DEFINE_REGU(VPLL, vpll, REGULATORMODE0, REGULATORSETTING0,
mc13892_vpll),
- MC13892_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0,
+ MC13892_DEFINE_REGU(VDIG, vdig, REGULATORMODE0, REGULATORSETTING0,
mc13892_vdig),
- MC13892_DEFINE_REGU(VSD, REGULATORMODE1, REGULATORSETTING1,
+ MC13892_DEFINE_REGU(VSD, vsd, REGULATORMODE1, REGULATORSETTING1,
mc13892_vsd),
- MC13892_DEFINE_REGU(VUSB2, REGULATORMODE0, REGULATORSETTING0,
+ MC13892_DEFINE_REGU(VUSB2, vusb2, REGULATORMODE0, REGULATORSETTING0,
mc13892_vusb2),
- MC13892_DEFINE_REGU(VVIDEO, REGULATORMODE1, REGULATORSETTING1,
+ MC13892_DEFINE_REGU(VVIDEO, vvideo, REGULATORMODE1, REGULATORSETTING1,
mc13892_vvideo),
- MC13892_DEFINE_REGU(VAUDIO, REGULATORMODE1, REGULATORSETTING1,
+ MC13892_DEFINE_REGU(VAUDIO, vaudio, REGULATORMODE1, REGULATORSETTING1,
mc13892_vaudio),
- MC13892_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0,
+ MC13892_DEFINE_REGU(VCAM, vcam, REGULATORMODE1, REGULATORSETTING0,
mc13892_vcam),
- MC13892_DEFINE_REGU(VGEN1, REGULATORMODE0, REGULATORSETTING0,
+ MC13892_DEFINE_REGU(VGEN1, vgen1, REGULATORMODE0, REGULATORSETTING0,
mc13892_vgen1),
- MC13892_DEFINE_REGU(VGEN2, REGULATORMODE0, REGULATORSETTING0,
+ MC13892_DEFINE_REGU(VGEN2, vgen2, REGULATORMODE0, REGULATORSETTING0,
mc13892_vgen2),
- MC13892_DEFINE_REGU(VGEN3, REGULATORMODE1, REGULATORSETTING0,
+ MC13892_DEFINE_REGU(VGEN3, vgen3, REGULATORMODE1, REGULATORSETTING0,
mc13892_vgen3),
- MC13892_FIXED_DEFINE(VUSB, USB1, mc13892_vusb),
- MC13892_GPO_DEFINE(GPO1, POWERMISC, mc13892_gpo),
- MC13892_GPO_DEFINE(GPO2, POWERMISC, mc13892_gpo),
- MC13892_GPO_DEFINE(GPO3, POWERMISC, mc13892_gpo),
- MC13892_GPO_DEFINE(GPO4, POWERMISC, mc13892_gpo),
- MC13892_GPO_DEFINE(PWGT1SPI, POWERMISC, mc13892_pwgtdrv),
- MC13892_GPO_DEFINE(PWGT2SPI, POWERMISC, mc13892_pwgtdrv),
+ MC13892_FIXED_DEFINE(VUSB, vusb, USB1, mc13892_vusb),
+ MC13892_GPO_DEFINE(GPO1, gpo1, POWERMISC, mc13892_gpo),
+ MC13892_GPO_DEFINE(GPO2, gpo2, POWERMISC, mc13892_gpo),
+ MC13892_GPO_DEFINE(GPO3, gpo3, POWERMISC, mc13892_gpo),
+ MC13892_GPO_DEFINE(GPO4, gpo4, POWERMISC, mc13892_gpo),
+ MC13892_GPO_DEFINE(PWGT1SPI, pwgt1spi, POWERMISC, mc13892_pwgtdrv),
+ MC13892_GPO_DEFINE(PWGT2SPI, pwgt2spi, POWERMISC, mc13892_pwgtdrv),
};
static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
@@ -387,7 +387,7 @@ static int mc13892_gpo_regulator_is_enabled(struct regulator_dev *rdev)
}
-static struct regulator_ops mc13892_gpo_regulator_ops = {
+static const struct regulator_ops mc13892_gpo_regulator_ops = {
.enable = mc13892_gpo_regulator_enable,
.disable = mc13892_gpo_regulator_disable,
.is_enabled = mc13892_gpo_regulator_is_enabled,
@@ -479,7 +479,7 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
-static struct regulator_ops mc13892_sw_regulator_ops = {
+static const struct regulator_ops mc13892_sw_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = mc13892_sw_regulator_set_voltage_sel,
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index 2243138d8a58..8ff19150ca92 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -99,7 +99,7 @@ static int mc13xxx_regulator_get_voltage(struct regulator_dev *rdev)
return rdev->desc->volt_table[val];
}
-struct regulator_ops mc13xxx_regulator_ops = {
+const struct regulator_ops mc13xxx_regulator_ops = {
.enable = mc13xxx_regulator_enable,
.disable = mc13xxx_regulator_disable,
.is_enabled = mc13xxx_regulator_is_enabled,
@@ -127,7 +127,7 @@ int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV,
}
EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_set_voltage);
-struct regulator_ops mc13xxx_fixed_regulator_ops = {
+const struct regulator_ops mc13xxx_fixed_regulator_ops = {
.enable = mc13xxx_regulator_enable,
.disable = mc13xxx_regulator_disable,
.is_enabled = mc13xxx_regulator_is_enabled,
diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h
index 2ab9bfd93b4e..ba7eff1070bd 100644
--- a/drivers/regulator/mc13xxx.h
+++ b/drivers/regulator/mc13xxx.h
@@ -53,13 +53,13 @@ static inline struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
}
#endif
-extern struct regulator_ops mc13xxx_regulator_ops;
-extern struct regulator_ops mc13xxx_fixed_regulator_ops;
+extern const struct regulator_ops mc13xxx_regulator_ops;
+extern const struct regulator_ops mc13xxx_fixed_regulator_ops;
-#define MC13xxx_DEFINE(prefix, _name, _reg, _vsel_reg, _voltages, _ops) \
+#define MC13xxx_DEFINE(prefix, _name, _node, _reg, _vsel_reg, _voltages, _ops) \
[prefix ## _name] = { \
.desc = { \
- .name = #_name, \
+ .name = #_node, \
.n_voltages = ARRAY_SIZE(_voltages), \
.volt_table = _voltages, \
.ops = &_ops, \
@@ -74,10 +74,10 @@ extern struct regulator_ops mc13xxx_fixed_regulator_ops;
.vsel_mask = prefix ## _vsel_reg ## _ ## _name ## VSEL_M,\
}
-#define MC13xxx_FIXED_DEFINE(prefix, _name, _reg, _voltages, _ops) \
+#define MC13xxx_FIXED_DEFINE(prefix, _name, _node, _reg, _voltages, _ops) \
[prefix ## _name] = { \
.desc = { \
- .name = #_name, \
+ .name = #_node, \
.n_voltages = ARRAY_SIZE(_voltages), \
.volt_table = _voltages, \
.ops = &_ops, \
@@ -89,10 +89,10 @@ extern struct regulator_ops mc13xxx_fixed_regulator_ops;
.enable_bit = prefix ## _reg ## _ ## _name ## EN, \
}
-#define MC13xxx_GPO_DEFINE(prefix, _name, _reg, _voltages, _ops) \
+#define MC13xxx_GPO_DEFINE(prefix, _name, _node, _reg, _voltages, _ops) \
[prefix ## _name] = { \
.desc = { \
- .name = #_name, \
+ .name = #_node, \
.n_voltages = ARRAY_SIZE(_voltages), \
.volt_table = _voltages, \
.ops = &_ops, \
@@ -104,9 +104,9 @@ extern struct regulator_ops mc13xxx_fixed_regulator_ops;
.enable_bit = prefix ## _reg ## _ ## _name ## EN, \
}
-#define MC13xxx_DEFINE_SW(_name, _reg, _vsel_reg, _voltages, ops) \
- MC13xxx_DEFINE(SW, _name, _reg, _vsel_reg, _voltages, ops)
-#define MC13xxx_DEFINE_REGU(_name, _reg, _vsel_reg, _voltages, ops) \
- MC13xxx_DEFINE(REGU, _name, _reg, _vsel_reg, _voltages, ops)
+#define MC13xxx_DEFINE_SW(_name, _node, _reg, _vsel_reg, _voltages, ops) \
+ MC13xxx_DEFINE(SW, _name, _node, _reg, _vsel_reg, _voltages, ops)
+#define MC13xxx_DEFINE_REGU(_name, _node, _reg, _vsel_reg, _voltages, ops) \
+ MC13xxx_DEFINE(REGU, _name, _node, _reg, _vsel_reg, _voltages, ops)
#endif
diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 3479ae009b0b..3a8004abe044 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -17,6 +17,7 @@
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/suspend.h>
+#include <linux/gpio/consumer.h>
#define VDD_LOW_SEL 0x0D
#define VDD_HIGH_SEL 0x3F
@@ -546,7 +547,6 @@ static struct i2c_driver mcp16502_drv = {
module_i2c_driver(mcp16502_drv);
-MODULE_VERSION("1.0");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MCP16502 PMIC driver");
MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");
diff --git a/drivers/regulator/mt6311-regulator.c b/drivers/regulator/mt6311-regulator.c
index 0495716fd35f..01d69f43d2b0 100644
--- a/drivers/regulator/mt6311-regulator.c
+++ b/drivers/regulator/mt6311-regulator.c
@@ -38,13 +38,9 @@ static const struct regmap_config mt6311_regmap_config = {
#define MT6311_MAX_UV 1393750
#define MT6311_STEP_UV 6250
-static const struct regulator_linear_range buck_volt_range[] = {
- REGULATOR_LINEAR_RANGE(MT6311_MIN_UV, 0, 0x7f, MT6311_STEP_UV),
-};
-
static const struct regulator_ops mt6311_buck_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
@@ -71,8 +67,6 @@ static const struct regulator_ops mt6311_ldo_ops = {
.min_uV = MT6311_MIN_UV,\
.uV_step = MT6311_STEP_UV,\
.owner = THIS_MODULE,\
- .linear_ranges = buck_volt_range, \
- .n_linear_ranges = ARRAY_SIZE(buck_volt_range), \
.enable_reg = MT6311_VDVFS11_CON9,\
.enable_mask = MT6311_PMIC_VDVFS11_EN_MASK,\
.vsel_reg = MT6311_VDVFS11_CON12,\
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index ffa5fc3724e4..7b6bf3536271 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -255,7 +255,7 @@ static void of_get_regulation_constraints(struct device_node *np,
* @desc: regulator description
*
* Populates regulator_init_data structure by extracting data from device
- * tree node, returns a pointer to the populated struture or NULL if memory
+ * tree node, returns a pointer to the populated structure or NULL if memory
* alloc fails.
*/
struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
@@ -547,7 +547,7 @@ bool of_check_coupling_data(struct regulator_dev *rdev)
NULL);
if (c_n_phandles != n_phandles) {
- dev_err(&rdev->dev, "number of couped reg phandles mismatch\n");
+ dev_err(&rdev->dev, "number of coupled reg phandles mismatch\n");
ret = false;
goto clean;
}
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index c2cc392a27d4..7fb9e8dd834e 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -382,7 +382,7 @@ static struct palmas_sleep_requestor_info tps65917_sleep_req_info[] = {
EXTERNAL_REQUESTOR_TPS65917(LDO5, 2, 4),
};
-static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500};
+static const unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500};
#define SMPS_CTRL_MODE_OFF 0x00
#define SMPS_CTRL_MODE_ON 0x01
diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c
index a9446056435f..1600f9821891 100644
--- a/drivers/regulator/pv88060-regulator.c
+++ b/drivers/regulator/pv88060-regulator.c
@@ -53,10 +53,6 @@ enum {
struct pv88060_regulator {
struct regulator_desc desc;
- /* Current limiting */
- unsigned n_current_limits;
- const int *current_limits;
- unsigned int limit_mask;
unsigned int conf; /* buck configuration register */
};
@@ -75,7 +71,7 @@ static const struct regmap_config pv88060_regmap_config = {
* Entry indexes corresponds to register values.
*/
-static const int pv88060_buck1_limits[] = {
+static const unsigned int pv88060_buck1_limits[] = {
1496000, 2393000, 3291000, 4189000
};
@@ -128,40 +124,6 @@ static int pv88060_buck_set_mode(struct regulator_dev *rdev,
PV88060_BUCK_MODE_MASK, val);
}
-static int pv88060_set_current_limit(struct regulator_dev *rdev, int min,
- int max)
-{
- struct pv88060_regulator *info = rdev_get_drvdata(rdev);
- int i;
-
- /* search for closest to maximum */
- for (i = info->n_current_limits; i >= 0; i--) {
- if (min <= info->current_limits[i]
- && max >= info->current_limits[i]) {
- return regmap_update_bits(rdev->regmap,
- info->conf,
- info->limit_mask,
- i << PV88060_BUCK_ILIM_SHIFT);
- }
- }
-
- return -EINVAL;
-}
-
-static int pv88060_get_current_limit(struct regulator_dev *rdev)
-{
- struct pv88060_regulator *info = rdev_get_drvdata(rdev);
- unsigned int data;
- int ret;
-
- ret = regmap_read(rdev->regmap, info->conf, &data);
- if (ret < 0)
- return ret;
-
- data = (data & info->limit_mask) >> PV88060_BUCK_ILIM_SHIFT;
- return info->current_limits[data];
-}
-
static const struct regulator_ops pv88060_buck_ops = {
.get_mode = pv88060_buck_get_mode,
.set_mode = pv88060_buck_set_mode,
@@ -171,8 +133,8 @@ static const struct regulator_ops pv88060_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
- .set_current_limit = pv88060_set_current_limit,
- .get_current_limit = pv88060_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
};
static const struct regulator_ops pv88060_ldo_ops = {
@@ -184,6 +146,12 @@ static const struct regulator_ops pv88060_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
};
+static const struct regulator_ops pv88060_sw_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
#define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \
{\
.desc = {\
@@ -201,10 +169,11 @@ static const struct regulator_ops pv88060_ldo_ops = {
.enable_mask = PV88060_BUCK_EN, \
.vsel_reg = PV88060_REG_##regl_name##_CONF0,\
.vsel_mask = PV88060_VBUCK_MASK,\
+ .curr_table = limits_array,\
+ .n_current_limits = ARRAY_SIZE(limits_array),\
+ .csel_reg = PV88060_REG_##regl_name##_CONF1,\
+ .csel_mask = PV88060_BUCK_ILIM_MASK,\
},\
- .current_limits = limits_array,\
- .n_current_limits = ARRAY_SIZE(limits_array),\
- .limit_mask = PV88060_BUCK_ILIM_MASK, \
.conf = PV88060_REG_##regl_name##_CONF1,\
}
@@ -237,9 +206,8 @@ static const struct regulator_ops pv88060_ldo_ops = {
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.owner = THIS_MODULE,\
- .ops = &pv88060_ldo_ops,\
- .min_uV = max,\
- .uV_step = 0,\
+ .ops = &pv88060_sw_ops,\
+ .fixed_uV = max,\
.n_voltages = 1,\
.enable_reg = PV88060_REG_##regl_name##_CONF,\
.enable_mask = PV88060_SW_EN,\
diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
index 9a08cb2de501..bdddacdbeb99 100644
--- a/drivers/regulator/pv88080-regulator.c
+++ b/drivers/regulator/pv88080-regulator.c
@@ -45,12 +45,7 @@ enum pv88080_types {
struct pv88080_regulator {
struct regulator_desc desc;
- /* Current limiting */
- unsigned int n_current_limits;
- const int *current_limits;
- unsigned int limit_mask;
unsigned int mode_reg;
- unsigned int limit_reg;
unsigned int conf2;
unsigned int conf5;
};
@@ -102,11 +97,11 @@ static const struct regmap_config pv88080_regmap_config = {
* Entry indexes corresponds to register values.
*/
-static const int pv88080_buck1_limits[] = {
+static const unsigned int pv88080_buck1_limits[] = {
3230000, 5130000, 6960000, 8790000
};
-static const int pv88080_buck23_limits[] = {
+static const unsigned int pv88080_buck23_limits[] = {
1496000, 2393000, 3291000, 4189000
};
@@ -272,40 +267,6 @@ static int pv88080_buck_set_mode(struct regulator_dev *rdev,
PV88080_BUCK1_MODE_MASK, val);
}
-static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
- int max)
-{
- struct pv88080_regulator *info = rdev_get_drvdata(rdev);
- int i;
-
- /* search for closest to maximum */
- for (i = info->n_current_limits; i >= 0; i--) {
- if (min <= info->current_limits[i]
- && max >= info->current_limits[i]) {
- return regmap_update_bits(rdev->regmap,
- info->limit_reg,
- info->limit_mask,
- i << PV88080_BUCK1_ILIM_SHIFT);
- }
- }
-
- return -EINVAL;
-}
-
-static int pv88080_get_current_limit(struct regulator_dev *rdev)
-{
- struct pv88080_regulator *info = rdev_get_drvdata(rdev);
- unsigned int data;
- int ret;
-
- ret = regmap_read(rdev->regmap, info->limit_reg, &data);
- if (ret < 0)
- return ret;
-
- data = (data & info->limit_mask) >> PV88080_BUCK1_ILIM_SHIFT;
- return info->current_limits[data];
-}
-
static const struct regulator_ops pv88080_buck_ops = {
.get_mode = pv88080_buck_get_mode,
.set_mode = pv88080_buck_set_mode,
@@ -315,8 +276,8 @@ static const struct regulator_ops pv88080_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
- .set_current_limit = pv88080_set_current_limit,
- .get_current_limit = pv88080_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
};
static const struct regulator_ops pv88080_hvbuck_ops = {
@@ -341,9 +302,9 @@ static const struct regulator_ops pv88080_hvbuck_ops = {
.min_uV = min, \
.uV_step = step, \
.n_voltages = ((max) - (min))/(step) + 1, \
+ .curr_table = limits_array, \
+ .n_current_limits = ARRAY_SIZE(limits_array), \
},\
- .current_limits = limits_array, \
- .n_current_limits = ARRAY_SIZE(limits_array), \
}
#define PV88080_HVBUCK(chip, regl_name, min, step, max) \
@@ -521,9 +482,9 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
if (init_data)
config.init_data = &init_data[i];
- pv88080_regulator_info[i].limit_reg
+ pv88080_regulator_info[i].desc.csel_reg
= regmap_config->buck_regmap[i].buck_limit_reg;
- pv88080_regulator_info[i].limit_mask
+ pv88080_regulator_info[i].desc.csel_mask
= regmap_config->buck_regmap[i].buck_limit_mask;
pv88080_regulator_info[i].mode_reg
= regmap_config->buck_regmap[i].buck_mode_reg;
diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c
index 7a0c15957bd0..6e97cc6df2ee 100644
--- a/drivers/regulator/pv88090-regulator.c
+++ b/drivers/regulator/pv88090-regulator.c
@@ -42,10 +42,6 @@ enum {
struct pv88090_regulator {
struct regulator_desc desc;
- /* Current limiting */
- unsigned int n_current_limits;
- const int *current_limits;
- unsigned int limit_mask;
unsigned int conf;
unsigned int conf2;
};
@@ -71,14 +67,14 @@ static const struct regmap_config pv88090_regmap_config = {
* Entry indexes corresponds to register values.
*/
-static const int pv88090_buck1_limits[] = {
+static const unsigned int pv88090_buck1_limits[] = {
220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000,
1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000,
3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000,
5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000
};
-static const int pv88090_buck23_limits[] = {
+static const unsigned int pv88090_buck23_limits[] = {
1496000, 2393000, 3291000, 4189000
};
@@ -150,40 +146,6 @@ static int pv88090_buck_set_mode(struct regulator_dev *rdev,
PV88090_BUCK1_MODE_MASK, val);
}
-static int pv88090_set_current_limit(struct regulator_dev *rdev, int min,
- int max)
-{
- struct pv88090_regulator *info = rdev_get_drvdata(rdev);
- int i;
-
- /* search for closest to maximum */
- for (i = info->n_current_limits; i >= 0; i--) {
- if (min <= info->current_limits[i]
- && max >= info->current_limits[i]) {
- return regmap_update_bits(rdev->regmap,
- info->conf,
- info->limit_mask,
- i << PV88090_BUCK1_ILIM_SHIFT);
- }
- }
-
- return -EINVAL;
-}
-
-static int pv88090_get_current_limit(struct regulator_dev *rdev)
-{
- struct pv88090_regulator *info = rdev_get_drvdata(rdev);
- unsigned int data;
- int ret;
-
- ret = regmap_read(rdev->regmap, info->conf, &data);
- if (ret < 0)
- return ret;
-
- data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT;
- return info->current_limits[data];
-}
-
static const struct regulator_ops pv88090_buck_ops = {
.get_mode = pv88090_buck_get_mode,
.set_mode = pv88090_buck_set_mode,
@@ -193,8 +155,8 @@ static const struct regulator_ops pv88090_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
- .set_current_limit = pv88090_set_current_limit,
- .get_current_limit = pv88090_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
};
static const struct regulator_ops pv88090_ldo_ops = {
@@ -223,10 +185,11 @@ static const struct regulator_ops pv88090_ldo_ops = {
.enable_mask = PV88090_##regl_name##_EN, \
.vsel_reg = PV88090_REG_##regl_name##_CONF0, \
.vsel_mask = PV88090_V##regl_name##_MASK, \
+ .curr_table = limits_array, \
+ .n_current_limits = ARRAY_SIZE(limits_array), \
+ .csel_reg = PV88090_REG_##regl_name##_CONF1, \
+ .csel_mask = PV88090_##regl_name##_ILIM_MASK, \
},\
- .current_limits = limits_array, \
- .n_current_limits = ARRAY_SIZE(limits_array), \
- .limit_mask = PV88090_##regl_name##_ILIM_MASK, \
.conf = PV88090_REG_##regl_name##_CONF1, \
.conf2 = PV88090_REG_##regl_name##_CONF2, \
}
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index a2fd140eff81..3f53f9134b32 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -40,9 +40,6 @@ struct pwm_regulator_data {
/* regulator descriptor */
struct regulator_desc desc;
- /* Regulator ops */
- struct regulator_ops ops;
-
int state;
/* Enable GPIO */
@@ -231,7 +228,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
return 0;
}
-static struct regulator_ops pwm_regulator_voltage_table_ops = {
+static const struct regulator_ops pwm_regulator_voltage_table_ops = {
.set_voltage_sel = pwm_regulator_set_voltage_sel,
.get_voltage_sel = pwm_regulator_get_voltage_sel,
.list_voltage = pwm_regulator_list_voltage,
@@ -241,7 +238,7 @@ static struct regulator_ops pwm_regulator_voltage_table_ops = {
.is_enabled = pwm_regulator_is_enabled,
};
-static struct regulator_ops pwm_regulator_voltage_continuous_ops = {
+static const struct regulator_ops pwm_regulator_voltage_continuous_ops = {
.get_voltage = pwm_regulator_get_voltage,
.set_voltage = pwm_regulator_set_voltage,
.enable = pwm_regulator_enable,
@@ -249,7 +246,7 @@ static struct regulator_ops pwm_regulator_voltage_continuous_ops = {
.is_enabled = pwm_regulator_is_enabled,
};
-static struct regulator_desc pwm_regulator_desc = {
+static const struct regulator_desc pwm_regulator_desc = {
.name = "pwm-regulator",
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
@@ -287,9 +284,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
drvdata->state = -EINVAL;
drvdata->duty_cycle_table = duty_cycle_table;
- memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops,
- sizeof(drvdata->ops));
- drvdata->desc.ops = &drvdata->ops;
+ drvdata->desc.ops = &pwm_regulator_voltage_table_ops;
drvdata->desc.n_voltages = length / sizeof(*duty_cycle_table);
return 0;
@@ -301,9 +296,7 @@ static int pwm_regulator_init_continuous(struct platform_device *pdev,
u32 dutycycle_range[2] = { 0, 100 };
u32 dutycycle_unit = 100;
- memcpy(&drvdata->ops, &pwm_regulator_voltage_continuous_ops,
- sizeof(drvdata->ops));
- drvdata->desc.ops = &drvdata->ops;
+ drvdata->desc.ops = &pwm_regulator_voltage_continuous_ops;
drvdata->desc.continuous_voltage_range = true;
of_property_read_u32_array(pdev->dev.of_node,
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index f5bca77d67c1..68bc23df4213 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -31,6 +31,11 @@ struct qcom_rpm_reg {
int is_enabled;
int uV;
+ u32 load;
+
+ unsigned int enabled_updated:1;
+ unsigned int uv_updated:1;
+ unsigned int load_updated:1;
};
struct rpm_regulator_req {
@@ -43,30 +48,59 @@ struct rpm_regulator_req {
#define RPM_KEY_UV 0x00007675 /* "uv" */
#define RPM_KEY_MA 0x0000616d /* "ma" */
-static int rpm_reg_write_active(struct qcom_rpm_reg *vreg,
- struct rpm_regulator_req *req,
- size_t size)
+static int rpm_reg_write_active(struct qcom_rpm_reg *vreg)
{
- return qcom_rpm_smd_write(vreg->rpm,
- QCOM_SMD_RPM_ACTIVE_STATE,
- vreg->type,
- vreg->id,
- req, size);
+ struct rpm_regulator_req req[3];
+ int reqlen = 0;
+ int ret;
+
+ if (vreg->enabled_updated) {
+ req[reqlen].key = cpu_to_le32(RPM_KEY_SWEN);
+ req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
+ req[reqlen].value = cpu_to_le32(vreg->is_enabled);
+ reqlen++;
+ }
+
+ if (vreg->uv_updated && vreg->is_enabled) {
+ req[reqlen].key = cpu_to_le32(RPM_KEY_UV);
+ req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
+ req[reqlen].value = cpu_to_le32(vreg->uV);
+ reqlen++;
+ }
+
+ if (vreg->load_updated && vreg->is_enabled) {
+ req[reqlen].key = cpu_to_le32(RPM_KEY_MA);
+ req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
+ req[reqlen].value = cpu_to_le32(vreg->load / 1000);
+ reqlen++;
+ }
+
+ if (!reqlen)
+ return 0;
+
+ ret = qcom_rpm_smd_write(vreg->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+ vreg->type, vreg->id,
+ req, sizeof(req[0]) * reqlen);
+ if (!ret) {
+ vreg->enabled_updated = 0;
+ vreg->uv_updated = 0;
+ vreg->load_updated = 0;
+ }
+
+ return ret;
}
static int rpm_reg_enable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
int ret;
- req.key = cpu_to_le32(RPM_KEY_SWEN);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = cpu_to_le32(1);
+ vreg->is_enabled = 1;
+ vreg->enabled_updated = 1;
- ret = rpm_reg_write_active(vreg, &req, sizeof(req));
- if (!ret)
- vreg->is_enabled = 1;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->is_enabled = 0;
return ret;
}
@@ -81,16 +115,14 @@ static int rpm_reg_is_enabled(struct regulator_dev *rdev)
static int rpm_reg_disable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
int ret;
- req.key = cpu_to_le32(RPM_KEY_SWEN);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = 0;
+ vreg->is_enabled = 0;
+ vreg->enabled_updated = 1;
- ret = rpm_reg_write_active(vreg, &req, sizeof(req));
- if (!ret)
- vreg->is_enabled = 0;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->is_enabled = 1;
return ret;
}
@@ -108,16 +140,15 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev,
unsigned *selector)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
- int ret = 0;
+ int ret;
+ int old_uV = vreg->uV;
- req.key = cpu_to_le32(RPM_KEY_UV);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = cpu_to_le32(min_uV);
+ vreg->uV = min_uV;
+ vreg->uv_updated = 1;
- ret = rpm_reg_write_active(vreg, &req, sizeof(req));
- if (!ret)
- vreg->uV = min_uV;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->uV = old_uV;
return ret;
}
@@ -125,13 +156,16 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev,
static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
+ u32 old_load = vreg->load;
+ int ret;
- req.key = cpu_to_le32(RPM_KEY_MA);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = cpu_to_le32(load_uA / 1000);
+ vreg->load = load_uA;
+ vreg->load_updated = 1;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->load = old_load;
- return rpm_reg_write_active(vreg, &req, sizeof(req));
+ return ret;
}
static const struct regulator_ops rpm_smps_ldo_ops = {
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 213b68743cc8..23713e16c286 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1,5 +1,5 @@
/*
- * Regulator driver for Rockchip RK808/RK818
+ * Regulator driver for Rockchip RK805/RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
@@ -363,28 +363,28 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
rdev->desc->enable_mask);
}
-static struct regulator_ops rk805_reg_ops = {
- .list_voltage = regulator_list_voltage_linear,
- .map_voltage = regulator_map_voltage_linear,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
- .set_suspend_enable = rk805_set_suspend_enable,
- .set_suspend_disable = rk805_set_suspend_disable,
+static const struct regulator_ops rk805_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk805_set_suspend_enable,
+ .set_suspend_disable = rk805_set_suspend_disable,
};
-static struct regulator_ops rk805_switch_ops = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
- .set_suspend_enable = rk805_set_suspend_enable,
- .set_suspend_disable = rk805_set_suspend_disable,
+static const struct regulator_ops rk805_switch_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = rk805_set_suspend_enable,
+ .set_suspend_disable = rk805_set_suspend_disable,
};
-static struct regulator_ops rk808_buck1_2_ops = {
+static const struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
@@ -399,7 +399,7 @@ static struct regulator_ops rk808_buck1_2_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
-static struct regulator_ops rk808_reg_ops = {
+static const struct regulator_ops rk808_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -412,7 +412,7 @@ static struct regulator_ops rk808_reg_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
-static struct regulator_ops rk808_reg_ops_ranges = {
+static const struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -425,7 +425,7 @@ static struct regulator_ops rk808_reg_ops_ranges = {
.set_suspend_disable = rk808_set_suspend_disable,
};
-static struct regulator_ops rk808_switch_ops = {
+static const struct regulator_ops rk808_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -433,6 +433,12 @@ static struct regulator_ops rk808_switch_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
+static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
+ REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
+};
+
static const struct regulator_desc rk805_reg[] = {
{
.name = "DCDC_REG1",
@@ -440,11 +446,11 @@ static const struct regulator_desc rk805_reg[] = {
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC1,
- .ops = &rk805_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
- .min_uV = 712500,
- .uV_step = 12500,
.n_voltages = 64,
+ .linear_ranges = rk805_buck_1_2_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
@@ -456,11 +462,11 @@ static const struct regulator_desc rk805_reg[] = {
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC2,
- .ops = &rk805_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
- .min_uV = 712500,
- .uV_step = 12500,
.n_voltages = 64,
+ .linear_ranges = rk805_buck_1_2_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
@@ -796,7 +802,7 @@ static struct platform_driver rk808_regulator_driver = {
module_platform_driver(rk808_regulator_driver);
-MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
+MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c
index 96d2c18e051a..639cbadc044a 100644
--- a/drivers/regulator/rt5033-regulator.c
+++ b/drivers/regulator/rt5033-regulator.c
@@ -16,14 +16,14 @@
#include <linux/mfd/rt5033-private.h>
#include <linux/regulator/of_regulator.h>
-static struct regulator_ops rt5033_safe_ldo_ops = {
+static const struct regulator_ops rt5033_safe_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear,
};
-static struct regulator_ops rt5033_buck_ops = {
+static const struct regulator_ops rt5033_buck_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 095d25f3d2ea..58a1fe583a6c 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -298,13 +298,13 @@ static const struct regulator_desc regulators[] = {
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
regulator_desc_ldo(4, STEP_50_MV),
- regulator_desc_ldo(5, STEP_50_MV),
+ regulator_desc_ldo(5, STEP_25_MV),
regulator_desc_ldo(6, STEP_25_MV),
regulator_desc_ldo(7, STEP_50_MV),
regulator_desc_ldo(8, STEP_50_MV),
regulator_desc_ldo(9, STEP_50_MV),
regulator_desc_ldo(10, STEP_50_MV),
- regulator_desc_ldo(11, STEP_25_MV),
+ regulator_desc_ldo(11, STEP_50_MV),
regulator_desc_ldo(12, STEP_50_MV),
regulator_desc_ldo(13, STEP_50_MV),
regulator_desc_ldo(14, STEP_50_MV),
@@ -315,11 +315,11 @@ static const struct regulator_desc regulators[] = {
regulator_desc_ldo(19, STEP_50_MV),
regulator_desc_ldo(20, STEP_50_MV),
regulator_desc_ldo(21, STEP_50_MV),
- regulator_desc_ldo(22, STEP_25_MV),
- regulator_desc_ldo(23, STEP_25_MV),
+ regulator_desc_ldo(22, STEP_50_MV),
+ regulator_desc_ldo(23, STEP_50_MV),
regulator_desc_ldo(24, STEP_50_MV),
regulator_desc_ldo(25, STEP_50_MV),
- regulator_desc_ldo(26, STEP_50_MV),
+ regulator_desc_ldo(26, STEP_25_MV),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index ee4a23ab0663..134c62db36c5 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -362,7 +362,7 @@ static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_ldo(32, STEP_50_MV),
regulator_desc_s2mps11_ldo(33, STEP_50_MV),
regulator_desc_s2mps11_ldo(34, STEP_50_MV),
- regulator_desc_s2mps11_ldo(35, STEP_50_MV),
+ regulator_desc_s2mps11_ldo(35, STEP_25_MV),
regulator_desc_s2mps11_ldo(36, STEP_50_MV),
regulator_desc_s2mps11_ldo(37, STEP_50_MV),
regulator_desc_s2mps11_ldo(38, STEP_50_MV),
@@ -372,8 +372,8 @@ static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV),
+ regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_12_5_MV),
regulator_desc_s2mps11_buck9,
regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
};
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index b581f01f3395..bb9d1a083299 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -115,7 +115,7 @@ static const struct sec_voltage_desc *reg_voltage_map[] = {
[S5M8767_BUCK9] = &buck_voltage_val3,
};
-static unsigned int s5m8767_opmode_reg[][4] = {
+static const unsigned int s5m8767_opmode_reg[][4] = {
/* {OFF, ON, LOWPOWER, SUSPEND} */
/* LDO1 ... LDO28 */
{0x0, 0x3, 0x2, 0x1}, /* LDO1 */
@@ -339,13 +339,9 @@ static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int new_sel)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- const struct sec_voltage_desc *desc;
- int reg_id = rdev_get_id(rdev);
-
- desc = reg_voltage_map[reg_id];
if ((old_sel < new_sel) && s5m8767->ramp_delay)
- return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
+ return DIV_ROUND_UP(rdev->desc->uV_step * (new_sel - old_sel),
s5m8767->ramp_delay * 1000);
return 0;
}
diff --git a/drivers/regulator/stm32-vrefbuf.c b/drivers/regulator/stm32-vrefbuf.c
index e0a9c445ed67..ba2f24949dc9 100644
--- a/drivers/regulator/stm32-vrefbuf.c
+++ b/drivers/regulator/stm32-vrefbuf.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
+#include <linux/pm_runtime.h>
/* STM32 VREFBUF registers */
#define STM32_VREFBUF_CSR 0x00
@@ -25,9 +26,12 @@
#define STM32_HIZ BIT(1)
#define STM32_ENVR BIT(0)
+#define STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS 10
+
struct stm32_vrefbuf {
void __iomem *base;
struct clk *clk;
+ struct device *dev;
};
static const unsigned int stm32_vrefbuf_voltages[] = {
@@ -38,9 +42,16 @@ static const unsigned int stm32_vrefbuf_voltages[] = {
static int stm32_vrefbuf_enable(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
- u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+ u32 val;
int ret;
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->dev);
+ return ret;
+ }
+
+ val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_HIZ) | STM32_ENVR;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
@@ -59,45 +70,95 @@ static int stm32_vrefbuf_enable(struct regulator_dev *rdev)
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
}
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+
return ret;
}
static int stm32_vrefbuf_disable(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
- u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+ u32 val;
+ int ret;
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->dev);
+ return ret;
+ }
+
+ val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_ENVR) | STM32_HIZ;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+
return 0;
}
static int stm32_vrefbuf_is_enabled(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+ int ret;
+
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->dev);
+ return ret;
+ }
+
+ ret = readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR;
- return readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR;
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+
+ return ret;
}
static int stm32_vrefbuf_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
- u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+ u32 val;
+ int ret;
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->dev);
+ return ret;
+ }
+
+ val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_VRS) | FIELD_PREP(STM32_VRS, sel);
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+
return 0;
}
static int stm32_vrefbuf_get_voltage_sel(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
- u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+ u32 val;
+ int ret;
- return FIELD_GET(STM32_VRS, val);
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->dev);
+ return ret;
+ }
+
+ val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+ ret = FIELD_GET(STM32_VRS, val);
+
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+
+ return ret;
}
static const struct regulator_ops stm32_vrefbuf_volt_ops = {
@@ -130,6 +191,7 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ priv->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, res);
@@ -140,10 +202,17 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(&pdev->dev, "clk prepare failed with error %d\n", ret);
- return ret;
+ goto err_pm_stop;
}
config.dev = &pdev->dev;
@@ -161,10 +230,17 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, rdev);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
err_clk_dis:
clk_disable_unprepare(priv->clk);
+err_pm_stop:
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
return ret;
}
@@ -174,12 +250,42 @@ static int stm32_vrefbuf_remove(struct platform_device *pdev)
struct regulator_dev *rdev = platform_get_drvdata(pdev);
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+ pm_runtime_get_sync(&pdev->dev);
regulator_unregister(rdev);
clk_disable_unprepare(priv->clk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
return 0;
};
+static int __maybe_unused stm32_vrefbuf_runtime_suspend(struct device *dev)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static int __maybe_unused stm32_vrefbuf_runtime_resume(struct device *dev)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+
+ return clk_prepare_enable(priv->clk);
+}
+
+static const struct dev_pm_ops stm32_vrefbuf_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(stm32_vrefbuf_runtime_suspend,
+ stm32_vrefbuf_runtime_resume,
+ NULL)
+};
+
static const struct of_device_id stm32_vrefbuf_of_match[] = {
{ .compatible = "st,stm32-vrefbuf", },
{},
@@ -192,6 +298,7 @@ static struct platform_driver stm32_vrefbuf_driver = {
.driver = {
.name = "stm32-vrefbuf",
.of_match_table = of_match_ptr(stm32_vrefbuf_of_match),
+ .pm = &stm32_vrefbuf_pm_ops,
},
};
module_platform_driver(stm32_vrefbuf_driver);
diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c
index 16ba0297f709..f09061473613 100644
--- a/drivers/regulator/stpmic1_regulator.c
+++ b/drivers/regulator/stpmic1_regulator.c
@@ -12,8 +12,10 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
/**
- * stpmic1 regulator description
+ * stpmic1 regulator description: this structure is used as driver data
* @desc: regulator framework description
* @mask_reset_reg: mask reset register address
* @mask_reset_mask: mask rank and mask reset register mask
@@ -28,28 +30,9 @@ struct stpmic1_regulator_cfg {
u8 icc_mask;
};
-/**
- * stpmic1 regulator data: this structure is used as driver data
- * @regul_id: regulator id
- * @reg_node: DT node of regulator (unused on non-DT platforms)
- * @cfg: stpmic specific regulator description
- * @mask_reset: mask_reset bit value
- * @irq_curlim: current limit interrupt number
- * @regmap: point to parent regmap structure
- */
-struct stpmic1_regulator {
- unsigned int regul_id;
- struct device_node *reg_node;
- struct stpmic1_regulator_cfg *cfg;
- u8 mask_reset;
- int irq_curlim;
- struct regmap *regmap;
-};
-
static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode);
static unsigned int stpmic1_get_mode(struct regulator_dev *rdev);
static int stpmic1_set_icc(struct regulator_dev *rdev);
-static int stpmic1_regulator_parse_dt(void *driver_data);
static unsigned int stpmic1_map_mode(unsigned int mode);
enum {
@@ -72,15 +55,13 @@ enum {
/* Enable time worst case is 5000mV/(2250uV/uS) */
#define PMIC_ENABLE_TIME_US 2200
-#define STPMIC1_BUCK_MODE_NORMAL 0
-#define STPMIC1_BUCK_MODE_LP BUCK_HPLP_ENABLE_MASK
-
-struct regulator_linear_range buck1_ranges[] = {
- REGULATOR_LINEAR_RANGE(600000, 0, 30, 25000),
- REGULATOR_LINEAR_RANGE(1350000, 31, 63, 0),
+static const struct regulator_linear_range buck1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(725000, 0, 4, 0),
+ REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000),
+ REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0),
};
-struct regulator_linear_range buck2_ranges[] = {
+static const struct regulator_linear_range buck2_ranges[] = {
REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
@@ -94,7 +75,7 @@ struct regulator_linear_range buck2_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
};
-struct regulator_linear_range buck3_ranges[] = {
+static const struct regulator_linear_range buck3_ranges[] = {
REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
@@ -102,10 +83,9 @@ struct regulator_linear_range buck3_ranges[] = {
REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0),
REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000),
REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
-
};
-struct regulator_linear_range buck4_ranges[] = {
+static const struct regulator_linear_range buck4_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
@@ -113,24 +93,21 @@ struct regulator_linear_range buck4_ranges[] = {
REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000),
REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
-
};
-struct regulator_linear_range ldo1_ranges[] = {
+static const struct regulator_linear_range ldo1_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
-
};
-struct regulator_linear_range ldo2_ranges[] = {
+static const struct regulator_linear_range ldo2_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
-
};
-struct regulator_linear_range ldo3_ranges[] = {
+static const struct regulator_linear_range ldo3_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
@@ -138,18 +115,18 @@ struct regulator_linear_range ldo3_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
};
-struct regulator_linear_range ldo5_ranges[] = {
+static const struct regulator_linear_range ldo5_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
};
-struct regulator_linear_range ldo6_ranges[] = {
+static const struct regulator_linear_range ldo6_ranges[] = {
REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
};
-static struct regulator_ops stpmic1_ldo_ops = {
+static const struct regulator_ops stpmic1_ldo_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.is_enabled = regulator_is_enabled_regmap,
@@ -157,11 +134,10 @@ static struct regulator_ops stpmic1_ldo_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
-static struct regulator_ops stpmic1_ldo3_ops = {
+static const struct regulator_ops stpmic1_ldo3_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_iterate,
.is_enabled = regulator_is_enabled_regmap,
@@ -169,21 +145,19 @@ static struct regulator_ops stpmic1_ldo3_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
-static struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
+static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
-static struct regulator_ops stpmic1_buck_ops = {
+static const struct regulator_ops stpmic1_buck_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.is_enabled = regulator_is_enabled_regmap,
@@ -197,20 +171,27 @@ static struct regulator_ops stpmic1_buck_ops = {
.set_over_current_protection = stpmic1_set_icc,
};
-static struct regulator_ops stpmic1_vref_ddr_ops = {
+static const struct regulator_ops stpmic1_vref_ddr_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
};
-static struct regulator_ops stpmic1_switch_regul_ops = {
+static const struct regulator_ops stpmic1_boost_regul_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
+static const struct regulator_ops stpmic1_switch_regul_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_over_current_protection = stpmic1_set_icc,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
#define REG_LDO(ids, base) { \
.name = #ids, \
.id = STPMIC1_##ids, \
@@ -227,8 +208,6 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@@ -252,8 +231,6 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.bypass_mask = LDO_BYPASS_MASK, \
.bypass_val_on = LDO_BYPASS_MASK, \
.bypass_val_off = 0, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@@ -271,8 +248,6 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@@ -312,12 +287,47 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
-#define REG_SWITCH(ids, base, reg, mask, val) { \
+#define REG_BOOST(ids, base) { \
+ .name = #ids, \
+ .id = STPMIC1_##ids, \
+ .n_voltages = 1, \
+ .ops = &stpmic1_boost_regul_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 0, \
+ .fixed_uV = 5000000, \
+ .enable_reg = BST_SW_CR, \
+ .enable_mask = BOOST_ENABLED, \
+ .enable_val = BOOST_ENABLED, \
+ .disable_val = 0, \
+ .enable_time = PMIC_ENABLE_TIME_US, \
+ .supply_name = #base, \
+}
+
+#define REG_VBUS_OTG(ids, base) { \
+ .name = #ids, \
+ .id = STPMIC1_##ids, \
+ .n_voltages = 1, \
+ .ops = &stpmic1_switch_regul_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 0, \
+ .fixed_uV = 5000000, \
+ .enable_reg = BST_SW_CR, \
+ .enable_mask = USBSW_OTG_SWITCH_ENABLED, \
+ .enable_val = USBSW_OTG_SWITCH_ENABLED, \
+ .disable_val = 0, \
+ .enable_time = PMIC_ENABLE_TIME_US, \
+ .supply_name = #base, \
+ .active_discharge_reg = BST_SW_CR, \
+ .active_discharge_mask = VBUS_OTG_DISCHARGE, \
+ .active_discharge_on = VBUS_OTG_DISCHARGE, \
+}
+
+#define REG_SW_OUT(ids, base) { \
.name = #ids, \
.id = STPMIC1_##ids, \
.n_voltages = 1, \
@@ -326,15 +336,18 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.owner = THIS_MODULE, \
.min_uV = 0, \
.fixed_uV = 5000000, \
- .enable_reg = (reg), \
- .enable_mask = (mask), \
- .enable_val = (val), \
+ .enable_reg = BST_SW_CR, \
+ .enable_mask = SWIN_SWOUT_ENABLED, \
+ .enable_val = SWIN_SWOUT_ENABLED, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.supply_name = #base, \
+ .active_discharge_reg = BST_SW_CR, \
+ .active_discharge_mask = SW_OUT_DISCHARGE, \
+ .active_discharge_on = SW_OUT_DISCHARGE, \
}
-struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
+static const struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
[STPMIC1_BUCK1] = {
.desc = REG_BUCK(BUCK1, buck1),
.icc_reg = BUCKS_ICCTO_CR,
@@ -411,23 +424,17 @@ struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
.mask_reset_mask = BIT(6),
},
[STPMIC1_BOOST] = {
- .desc = REG_SWITCH(BOOST, boost, BST_SW_CR,
- BOOST_ENABLED,
- BOOST_ENABLED),
+ .desc = REG_BOOST(BOOST, boost),
.icc_reg = BUCKS_ICCTO_CR,
.icc_mask = BIT(6),
},
[STPMIC1_VBUS_OTG] = {
- .desc = REG_SWITCH(VBUS_OTG, pwr_sw1, BST_SW_CR,
- USBSW_OTG_SWITCH_ENABLED,
- USBSW_OTG_SWITCH_ENABLED),
+ .desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1),
.icc_reg = BUCKS_ICCTO_CR,
.icc_mask = BIT(4),
},
[STPMIC1_SW_OUT] = {
- .desc = REG_SWITCH(SW_OUT, pwr_sw2, BST_SW_CR,
- SWIN_SWOUT_ENABLED,
- SWIN_SWOUT_ENABLED),
+ .desc = REG_SW_OUT(SW_OUT, pwr_sw2),
.icc_reg = BUCKS_ICCTO_CR,
.icc_mask = BIT(5),
},
@@ -448,8 +455,9 @@ static unsigned int stpmic1_map_mode(unsigned int mode)
static unsigned int stpmic1_get_mode(struct regulator_dev *rdev)
{
int value;
+ struct regmap *regmap = rdev_get_regmap(rdev);
- regmap_read(rdev->regmap, rdev->desc->enable_reg, &value);
+ regmap_read(regmap, rdev->desc->enable_reg, &value);
if (value & STPMIC1_BUCK_MODE_LP)
return REGULATOR_MODE_STANDBY;
@@ -460,6 +468,7 @@ static unsigned int stpmic1_get_mode(struct regulator_dev *rdev)
static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
int value;
+ struct regmap *regmap = rdev_get_regmap(rdev);
switch (mode) {
case REGULATOR_MODE_NORMAL:
@@ -472,17 +481,18 @@ static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
return -EINVAL;
}
- return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ return regmap_update_bits(regmap, rdev->desc->enable_reg,
STPMIC1_BUCK_MODE_LP, value);
}
static int stpmic1_set_icc(struct regulator_dev *rdev)
{
- struct stpmic1_regulator *regul = rdev_get_drvdata(rdev);
+ struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev);
+ struct regmap *regmap = rdev_get_regmap(rdev);
/* enable switch off in case of over current */
- return regmap_update_bits(regul->regmap, regul->cfg->icc_reg,
- regul->cfg->icc_mask, regul->cfg->icc_mask);
+ return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask,
+ cfg->icc_mask);
}
static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data)
@@ -501,46 +511,13 @@ static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
-static int stpmic1_regulator_init(struct platform_device *pdev,
- struct regulator_dev *rdev)
-{
- struct stpmic1_regulator *regul = rdev_get_drvdata(rdev);
- int ret = 0;
-
- /* set mask reset */
- if (regul->mask_reset && regul->cfg->mask_reset_reg != 0) {
- ret = regmap_update_bits(regul->regmap,
- regul->cfg->mask_reset_reg,
- regul->cfg->mask_reset_mask,
- regul->cfg->mask_reset_mask);
- if (ret) {
- dev_err(&pdev->dev, "set mask reset failed\n");
- return ret;
- }
- }
-
- /* setup an irq handler for over-current detection */
- if (regul->irq_curlim > 0) {
- ret = devm_request_threaded_irq(&pdev->dev,
- regul->irq_curlim, NULL,
- stpmic1_curlim_irq_handler,
- IRQF_ONESHOT | IRQF_SHARED,
- pdev->name, rdev);
- if (ret) {
- dev_err(&pdev->dev, "Request IRQ failed\n");
- return ret;
- }
- }
- return 0;
-}
-
#define MATCH(_name, _id) \
[STPMIC1_##_id] = { \
.name = #_name, \
.desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \
}
-static struct of_regulator_match stpmic1_regulators_matches[] = {
+static struct of_regulator_match stpmic1_matches[] = {
MATCH(buck1, BUCK1),
MATCH(buck2, BUCK2),
MATCH(buck3, BUCK3),
@@ -557,94 +534,75 @@ static struct of_regulator_match stpmic1_regulators_matches[] = {
MATCH(pwr_sw2, SW_OUT),
};
-static int stpmic1_regulator_parse_dt(void *driver_data)
-{
- struct stpmic1_regulator *regul =
- (struct stpmic1_regulator *)driver_data;
-
- if (!regul)
- return -EINVAL;
-
- if (of_get_property(regul->reg_node, "st,mask-reset", NULL))
- regul->mask_reset = 1;
-
- regul->irq_curlim = of_irq_get(regul->reg_node, 0);
-
- return 0;
-}
-
-static struct
-regulator_dev *stpmic1_regulator_register(struct platform_device *pdev, int id,
- struct regulator_init_data *init_data,
- struct stpmic1_regulator *regul)
+static int stpmic1_regulator_register(struct platform_device *pdev, int id,
+ struct of_regulator_match *match,
+ const struct stpmic1_regulator_cfg *cfg)
{
struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent);
struct regulator_dev *rdev;
struct regulator_config config = {};
+ int ret = 0;
+ int irq;
config.dev = &pdev->dev;
- config.init_data = init_data;
- config.of_node = stpmic1_regulators_matches[id].of_node;
+ config.init_data = match->init_data;
+ config.of_node = match->of_node;
config.regmap = pmic_dev->regmap;
- config.driver_data = regul;
-
- regul->regul_id = id;
- regul->reg_node = config.of_node;
- regul->cfg = &stpmic1_regulator_cfgs[id];
- regul->regmap = pmic_dev->regmap;
+ config.driver_data = (void *)cfg;
- rdev = devm_regulator_register(&pdev->dev, &regul->cfg->desc, &config);
+ rdev = devm_regulator_register(&pdev->dev, &cfg->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s regulator\n",
- regul->cfg->desc.name);
+ cfg->desc.name);
+ return PTR_ERR(rdev);
+ }
+
+ /* set mask reset */
+ if (of_get_property(config.of_node, "st,mask-reset", NULL) &&
+ cfg->mask_reset_reg != 0) {
+ ret = regmap_update_bits(pmic_dev->regmap,
+ cfg->mask_reset_reg,
+ cfg->mask_reset_mask,
+ cfg->mask_reset_mask);
+ if (ret) {
+ dev_err(&pdev->dev, "set mask reset failed\n");
+ return ret;
+ }
}
- return rdev;
+ /* setup an irq handler for over-current detection */
+ irq = of_irq_get(config.of_node, 0);
+ if (irq > 0) {
+ ret = devm_request_threaded_irq(&pdev->dev,
+ irq, NULL,
+ stpmic1_curlim_irq_handler,
+ IRQF_ONESHOT | IRQF_SHARED,
+ pdev->name, rdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Request IRQ failed\n");
+ return ret;
+ }
+ }
+ return 0;
}
static int stpmic1_regulator_probe(struct platform_device *pdev)
{
- struct regulator_dev *rdev;
- struct stpmic1_regulator *regul;
- struct regulator_init_data *init_data;
- struct device_node *np;
int i, ret;
- np = pdev->dev.of_node;
-
- ret = of_regulator_match(&pdev->dev, np,
- stpmic1_regulators_matches,
- ARRAY_SIZE(stpmic1_regulators_matches));
+ ret = of_regulator_match(&pdev->dev, pdev->dev.of_node, stpmic1_matches,
+ ARRAY_SIZE(stpmic1_matches));
if (ret < 0) {
dev_err(&pdev->dev,
"Error in PMIC regulator device tree node");
return ret;
}
- regul = devm_kzalloc(&pdev->dev, ARRAY_SIZE(stpmic1_regulator_cfgs) *
- sizeof(struct stpmic1_regulator),
- GFP_KERNEL);
- if (!regul)
- return -ENOMEM;
-
for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) {
- /* Parse DT & find regulators to register */
- init_data = stpmic1_regulators_matches[i].init_data;
- if (init_data)
- init_data->regulator_init = &stpmic1_regulator_parse_dt;
-
- rdev = stpmic1_regulator_register(pdev, i, init_data, regul);
- if (IS_ERR(rdev))
- return PTR_ERR(rdev);
-
- ret = stpmic1_regulator_init(pdev, rdev);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to initialize regulator %d\n", ret);
+ ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i],
+ &stpmic1_regulator_cfgs[i]);
+ if (ret < 0)
return ret;
- }
-
- regul++;
}
dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n");
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index 6209beee1018..95708d34876b 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -188,7 +188,8 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = {
.set_suspend_disable = tps65218_pmic_set_suspend_disable,
};
-static const int ls3_currents[] = { 100, 200, 500, 1000 };
+static const int ls3_currents[] = { 100000, 200000, 500000, 1000000 };
+
static int tps65218_pmic_set_input_current_lim(struct regulator_dev *dev,
int lim_uA)
@@ -204,7 +205,8 @@ static int tps65218_pmic_set_input_current_lim(struct regulator_dev *dev,
return -EINVAL;
return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
- index << 2, TPS65218_PROTECT_L1);
+ index << __builtin_ctz(dev->desc->csel_mask),
+ TPS65218_PROTECT_L1);
}
static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
@@ -214,7 +216,7 @@ static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
unsigned int num_currents = ARRAY_SIZE(ls3_currents);
struct tps65218 *tps = rdev_get_drvdata(dev);
- while (index < num_currents && ls3_currents[index] < max_uA)
+ while (index < num_currents && ls3_currents[index] <= max_uA)
index++;
index--;
@@ -223,7 +225,8 @@ static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
return -EINVAL;
return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
- index << 2, TPS65218_PROTECT_L1);
+ index << __builtin_ctz(dev->desc->csel_mask),
+ TPS65218_PROTECT_L1);
}
static int tps65218_pmic_get_current_limit(struct regulator_dev *dev)
@@ -236,12 +239,13 @@ static int tps65218_pmic_get_current_limit(struct regulator_dev *dev)
if (retval < 0)
return retval;
- index = (index & dev->desc->csel_mask) >> 2;
+ index = (index & dev->desc->csel_mask) >>
+ __builtin_ctz(dev->desc->csel_mask);
return ls3_currents[index];
}
-static struct regulator_ops tps65218_ls3_ops = {
+static struct regulator_ops tps65218_ls23_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = tps65218_pmic_enable,
.disable = tps65218_pmic_disable,
@@ -303,8 +307,13 @@ static const struct regulator_desc regulators[] = {
TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges,
2, 0, 0, TPS65218_REG_SEQ6,
TPS65218_SEQ6_LDO1_SEQ_MASK),
+ TPS65218_REGULATOR("LS2", "regulator-ls2", TPS65218_LS_2,
+ REGULATOR_CURRENT, tps65218_ls23_ops, 0, 0, 0,
+ TPS65218_REG_ENABLE2, TPS65218_ENABLE2_LS2_EN,
+ TPS65218_REG_CONFIG2, TPS65218_CONFIG2_LS2ILIM_MASK,
+ NULL, 0, 0, 0, 0, 0),
TPS65218_REGULATOR("LS3", "regulator-ls3", TPS65218_LS_3,
- REGULATOR_CURRENT, tps65218_ls3_ops, 0, 0, 0,
+ REGULATOR_CURRENT, tps65218_ls23_ops, 0, 0, 0,
TPS65218_REG_ENABLE2, TPS65218_ENABLE2_LS3_EN,
TPS65218_REG_CONFIG2, TPS65218_CONFIG2_LS3ILIM_MASK,
NULL, 0, 0, 0, 0, 0),
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 884c7505ed91..402ea43c77d1 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -576,14 +576,9 @@ static int twlreg_probe(struct platform_device *pdev)
struct regulator_init_data *initdata;
struct regulation_constraints *c;
struct regulator_dev *rdev;
- const struct of_device_id *match;
struct regulator_config config = { };
- match = of_match_device(twl_of_match, &pdev->dev);
- if (!match)
- return -ENODEV;
-
- template = match->data;
+ template = of_device_get_match_data(&pdev->dev);
if (!template)
return -ENODEV;
diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c
index 219cbd910dbf..15f19df6bc5d 100644
--- a/drivers/regulator/twl6030-regulator.c
+++ b/drivers/regulator/twl6030-regulator.c
@@ -31,9 +31,6 @@ struct twlreg_info {
/* twl resource ID, for resource control state machine */
u8 id;
- /* chip constraints on regulator behavior */
- u16 min_mV;
-
u8 flags;
/* used by regulator core */
@@ -247,32 +244,11 @@ static int twl6030coresmps_get_voltage(struct regulator_dev *rdev)
return -ENODEV;
}
-static struct regulator_ops twl6030coresmps_ops = {
+static const struct regulator_ops twl6030coresmps_ops = {
.set_voltage = twl6030coresmps_set_voltage,
.get_voltage = twl6030coresmps_get_voltage,
};
-static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned sel)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
-
- switch (sel) {
- case 0:
- return 0;
- case 1 ... 24:
- /* Linear mapping from 00000001 to 00011000:
- * Absolute voltage value = 1.0 V + 0.1 V × (sel – 00000001)
- */
- return (info->min_mV + 100 * (sel - 1)) * 1000;
- case 25 ... 30:
- return -EINVAL;
- case 31:
- return 2750000;
- default:
- return -EINVAL;
- }
-}
-
static int
twl6030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
{
@@ -290,8 +266,8 @@ static int twl6030ldo_get_voltage_sel(struct regulator_dev *rdev)
return vsel;
}
-static struct regulator_ops twl6030ldo_ops = {
- .list_voltage = twl6030ldo_list_voltage,
+static const struct regulator_ops twl6030ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = twl6030ldo_set_voltage_sel,
.get_voltage_sel = twl6030ldo_get_voltage_sel,
@@ -305,7 +281,7 @@ static struct regulator_ops twl6030ldo_ops = {
.get_status = twl6030reg_get_status,
};
-static struct regulator_ops twl6030fixed_ops = {
+static const struct regulator_ops twl6030fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
.enable = twl6030reg_enable,
@@ -496,7 +472,7 @@ static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev)
return twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS);
}
-static struct regulator_ops twlsmps_ops = {
+static const struct regulator_ops twlsmps_ops = {
.list_voltage = twl6030smps_list_voltage,
.map_voltage = twl6030smps_map_voltage,
@@ -513,6 +489,11 @@ static struct regulator_ops twlsmps_ops = {
};
/*----------------------------------------------------------------------*/
+static const struct regulator_linear_range twl6030ldo_linear_range[] = {
+ REGULATOR_LINEAR_RANGE(0, 0, 0, 0),
+ REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000),
+ REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0),
+};
#define TWL6030_ADJUSTABLE_SMPS(label) \
static const struct twlreg_info TWL6030_INFO_##label = { \
@@ -525,28 +506,30 @@ static const struct twlreg_info TWL6030_INFO_##label = { \
}, \
}
-#define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts) \
+#define TWL6030_ADJUSTABLE_LDO(label, offset) \
static const struct twlreg_info TWL6030_INFO_##label = { \
.base = offset, \
- .min_mV = min_mVolts, \
.desc = { \
.name = #label, \
.id = TWL6030_REG_##label, \
.n_voltages = 32, \
+ .linear_ranges = twl6030ldo_linear_range, \
+ .n_linear_ranges = ARRAY_SIZE(twl6030ldo_linear_range), \
.ops = &twl6030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}, \
}
-#define TWL6032_ADJUSTABLE_LDO(label, offset, min_mVolts) \
+#define TWL6032_ADJUSTABLE_LDO(label, offset) \
static const struct twlreg_info TWL6032_INFO_##label = { \
.base = offset, \
- .min_mV = min_mVolts, \
.desc = { \
.name = #label, \
.id = TWL6032_REG_##label, \
.n_voltages = 32, \
+ .linear_ranges = twl6030ldo_linear_range, \
+ .n_linear_ranges = ARRAY_SIZE(twl6030ldo_linear_range), \
.ops = &twl6030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -557,7 +540,6 @@ static const struct twlreg_info TWL6032_INFO_##label = { \
static const struct twlreg_info TWLFIXED_INFO_##label = { \
.base = offset, \
.id = 0, \
- .min_mV = mVolts, \
.desc = { \
.name = #label, \
.id = TWL6030##_REG_##label, \
@@ -574,7 +556,6 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \
#define TWL6032_ADJUSTABLE_SMPS(label, offset) \
static const struct twlreg_info TWLSMPS_INFO_##label = { \
.base = offset, \
- .min_mV = 600, \
.desc = { \
.name = #label, \
.id = TWL6032_REG_##label, \
@@ -592,22 +573,22 @@ static const struct twlreg_info TWLSMPS_INFO_##label = { \
TWL6030_ADJUSTABLE_SMPS(VDD1);
TWL6030_ADJUSTABLE_SMPS(VDD2);
TWL6030_ADJUSTABLE_SMPS(VDD3);
-TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1000);
-TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 1000);
-TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 1000);
-TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 1000);
-TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 1000);
-TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 1000);
+TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54);
+TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58);
+TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c);
+TWL6030_ADJUSTABLE_LDO(VMMC, 0x68);
+TWL6030_ADJUSTABLE_LDO(VPP, 0x6c);
+TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74);
/* 6025 are renamed compared to 6030 versions */
-TWL6032_ADJUSTABLE_LDO(LDO2, 0x54, 1000);
-TWL6032_ADJUSTABLE_LDO(LDO4, 0x58, 1000);
-TWL6032_ADJUSTABLE_LDO(LDO3, 0x5c, 1000);
-TWL6032_ADJUSTABLE_LDO(LDO5, 0x68, 1000);
-TWL6032_ADJUSTABLE_LDO(LDO1, 0x6c, 1000);
-TWL6032_ADJUSTABLE_LDO(LDO7, 0x74, 1000);
-TWL6032_ADJUSTABLE_LDO(LDO6, 0x60, 1000);
-TWL6032_ADJUSTABLE_LDO(LDOLN, 0x64, 1000);
-TWL6032_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000);
+TWL6032_ADJUSTABLE_LDO(LDO2, 0x54);
+TWL6032_ADJUSTABLE_LDO(LDO4, 0x58);
+TWL6032_ADJUSTABLE_LDO(LDO3, 0x5c);
+TWL6032_ADJUSTABLE_LDO(LDO5, 0x68);
+TWL6032_ADJUSTABLE_LDO(LDO1, 0x6c);
+TWL6032_ADJUSTABLE_LDO(LDO7, 0x74);
+TWL6032_ADJUSTABLE_LDO(LDO6, 0x60);
+TWL6032_ADJUSTABLE_LDO(LDOLN, 0x64);
+TWL6032_ADJUSTABLE_LDO(LDOUSB, 0x70);
TWL6030_FIXED_LDO(VANA, 0x50, 2100, 0);
TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 0);
TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0);
@@ -687,14 +668,9 @@ static int twlreg_probe(struct platform_device *pdev)
struct regulator_init_data *initdata;
struct regulation_constraints *c;
struct regulator_dev *rdev;
- const struct of_device_id *match;
struct regulator_config config = { };
- match = of_match_device(twl_of_match, &pdev->dev);
- if (!match)
- return -ENODEV;
-
- template = match->data;
+ template = of_device_get_match_data(&pdev->dev);
if (!template)
return -ENODEV;
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
index abf22acbd13e..9026d5a3e964 100644
--- a/drivers/regulator/uniphier-regulator.c
+++ b/drivers/regulator/uniphier-regulator.c
@@ -32,7 +32,7 @@ struct uniphier_regulator_priv {
const struct uniphier_regulator_soc_data *data;
};
-static struct regulator_ops uniphier_regulator_ops = {
+static const struct regulator_ops uniphier_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -87,8 +87,10 @@ static int uniphier_regulator_probe(struct platform_device *pdev)
}
regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ goto out_rst_assert;
+ }
config.dev = dev;
config.driver_data = priv;
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 5a5bc4bb08d2..12b422373580 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -205,33 +205,10 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
* BUCKV specifics
*/
-static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector <= 0x8)
- return 600000;
- if (selector <= WM831X_BUCKV_MAX_SELECTOR)
- return 600000 + ((selector - 0x8) * 12500);
- return -EINVAL;
-}
-
-static int wm831x_buckv_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- u16 vsel;
-
- if (min_uV < 600000)
- vsel = 0;
- else if (min_uV <= 1800000)
- vsel = DIV_ROUND_UP(min_uV - 600000, 12500) + 8;
- else
- return -EINVAL;
-
- if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
- return -EINVAL;
-
- return vsel;
-}
+static const struct regulator_linear_range wm831x_buckv_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0),
+ REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500),
+};
static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
{
@@ -309,7 +286,7 @@ static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
int vsel;
- vsel = wm831x_buckv_map_voltage(rdev, uV, uV);
+ vsel = regulator_map_voltage_linear_range(rdev, uV, uV);
if (vsel < 0)
return vsel;
@@ -327,52 +304,18 @@ static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
}
/* Current limit options */
-static u16 wm831x_dcdc_ilim[] = {
- 125, 250, 375, 500, 625, 750, 875, 1000
+static const unsigned int wm831x_dcdc_ilim[] = {
+ 125000, 250000, 375000, 500000, 625000, 750000, 875000, 1000000
};
-static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
- int min_uA, int max_uA)
-{
- struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = dcdc->wm831x;
- u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
- int i;
-
- for (i = ARRAY_SIZE(wm831x_dcdc_ilim) - 1; i >= 0; i--) {
- if ((min_uA <= wm831x_dcdc_ilim[i]) &&
- (wm831x_dcdc_ilim[i] <= max_uA))
- return wm831x_set_bits(wm831x, reg,
- WM831X_DC1_HC_THR_MASK,
- i << WM831X_DC1_HC_THR_SHIFT);
- }
-
- return -EINVAL;
-}
-
-static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
-{
- struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = dcdc->wm831x;
- u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
- int val;
-
- val = wm831x_reg_read(wm831x, reg);
- if (val < 0)
- return val;
-
- val = (val & WM831X_DC1_HC_THR_MASK) >> WM831X_DC1_HC_THR_SHIFT;
- return wm831x_dcdc_ilim[val];
-}
-
static const struct regulator_ops wm831x_buckv_ops = {
.set_voltage_sel = wm831x_buckv_set_voltage_sel,
.get_voltage_sel = wm831x_buckv_get_voltage_sel,
- .list_voltage = wm831x_buckv_list_voltage,
- .map_voltage = wm831x_buckv_map_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
- .set_current_limit = wm831x_buckv_set_current_limit,
- .get_current_limit = wm831x_buckv_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@@ -492,10 +435,16 @@ static int wm831x_buckv_probe(struct platform_device *pdev)
dcdc->desc.id = id;
dcdc->desc.type = REGULATOR_VOLTAGE;
dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
+ dcdc->desc.linear_ranges = wm831x_buckv_ranges;
+ dcdc->desc.n_linear_ranges = ARRAY_SIZE(wm831x_buckv_ranges);
dcdc->desc.ops = &wm831x_buckv_ops;
dcdc->desc.owner = THIS_MODULE;
dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
dcdc->desc.enable_mask = 1 << id;
+ dcdc->desc.csel_reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+ dcdc->desc.csel_mask = WM831X_DC1_HC_THR_MASK;
+ dcdc->desc.n_current_limits = ARRAY_SIZE(wm831x_dcdc_ilim);
+ dcdc->desc.curr_table = wm831x_dcdc_ilim;
ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
if (ret < 0) {
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index c204d9a79436..45cdcd0fee53 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -208,6 +208,7 @@ enum tps65218_regulator_id {
/* LDOs */
TPS65218_LDO_1,
/* LS's */
+ TPS65218_LS_2,
TPS65218_LS_3,
};
@@ -218,7 +219,7 @@ enum tps65218_regulator_id {
/* Number of LDO voltage regulators available */
#define TPS65218_NUM_LDO 1
/* Number of total LS current regulators available */
-#define TPS65218_NUM_LS 1
+#define TPS65218_NUM_LS 2
/* Number of total regulators available */
#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO \
+ TPS65218_NUM_LS)
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 389bcaf7900f..377da2357118 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -264,6 +264,7 @@ enum regulator_type {
* @continuous_voltage_range: Indicates if the regulator can set any
* voltage within constrains range.
* @n_voltages: Number of selectors available for ops.list_voltage().
+ * @n_current_limits: Number of selectors available for current limits
*
* @min_uV: Voltage given by the lowest selector (if linear mapping)
* @uV_step: Voltage increase with each selector (if linear mapping)
@@ -278,14 +279,15 @@ enum regulator_type {
* @n_linear_ranges: Number of entries in the @linear_ranges (and in
* linear_range_selectors if used) table(s).
* @volt_table: Voltage mapping table (if table based mapping)
+ * @curr_table: Current limit mapping table (if table based mapping)
*
* @vsel_range_reg: Register for range selector when using pickable ranges
* and regulator_regmap_X_voltage_X_pickable functions.
* @vsel_range_mask: Mask for register bitfield used for range selector
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
* @vsel_mask: Mask for register bitfield used for selector
- * @csel_reg: Register for TPS65218 LS3 current regulator
- * @csel_mask: Mask for TPS65218 LS3 current regulator
+ * @csel_reg: Register for current limit selector using regmap set_current_limit
+ * @csel_mask: Mask for register bitfield used for current limit selector
* @apply_reg: Register for initiate voltage change on the output when
* using regulator_set_voltage_sel_regmap
* @apply_bit: Register bitfield used for initiate voltage change on the
@@ -333,6 +335,7 @@ struct regulator_desc {
int id;
unsigned int continuous_voltage_range:1;
unsigned n_voltages;
+ unsigned int n_current_limits;
const struct regulator_ops *ops;
int irq;
enum regulator_type type;
@@ -351,6 +354,7 @@ struct regulator_desc {
int n_linear_ranges;
const unsigned int *volt_table;
+ const unsigned int *curr_table;
unsigned int vsel_range_reg;
unsigned int vsel_range_mask;
@@ -401,13 +405,7 @@ struct regulator_desc {
* NULL).
* @regmap: regmap to use for core regmap helpers if dev_get_regmap() is
* insufficient.
- * @ena_gpio_initialized: GPIO controlling regulator enable was properly
- * initialized, meaning that >= 0 is a valid gpio
- * identifier and < 0 is a non existent gpio.
- * @ena_gpio: GPIO controlling regulator enable.
- * @ena_gpiod: GPIO descriptor controlling regulator enable.
- * @ena_gpio_invert: Sense for GPIO enable control.
- * @ena_gpio_flags: Flags to use when calling gpio_request_one()
+ * @ena_gpiod: GPIO controlling regulator enable.
*/
struct regulator_config {
struct device *dev;
@@ -416,11 +414,7 @@ struct regulator_config {
struct device_node *of_node;
struct regmap *regmap;
- bool ena_gpio_initialized;
- int ena_gpio;
struct gpio_desc *ena_gpiod;
- unsigned int ena_gpio_invert:1;
- unsigned int ena_gpio_flags;
};
/*
@@ -503,6 +497,7 @@ int regulator_notifier_call_chain(struct regulator_dev *rdev,
void *rdev_get_drvdata(struct regulator_dev *rdev);
struct device *rdev_get_dev(struct regulator_dev *rdev);
+struct regmap *rdev_get_regmap(struct regulator_dev *rdev);
int rdev_get_id(struct regulator_dev *rdev);
int regulator_mode_to_status(unsigned int);
@@ -543,9 +538,18 @@ int regulator_set_pull_down_regmap(struct regulator_dev *rdev);
int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
bool enable);
+int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
+ int min_uA, int max_uA);
+int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
void regulator_lock(struct regulator_dev *rdev);
void regulator_unlock(struct regulator_dev *rdev);
+/*
+ * Helper functions intended to be used by regulator drivers prior registering
+ * their regulators.
+ */
+int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
+ unsigned int selector);
#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 1a4340ed8e2b..f10140da7145 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -25,14 +25,6 @@ struct regulator_init_data;
* @input_supply: Name of the input regulator supply
* @microvolts: Output voltage of regulator
* @startup_delay: Start-up time in microseconds
- * @gpio_is_open_drain: Gpio pin is open drain or normal type.
- * If it is open drain type then HIGH will be set
- * through PULL-UP with setting gpio as input
- * and low will be set as gpio-output with driven
- * to low. For non-open-drain case, the gpio will
- * will be in output and drive to low/high accordingly.
- * @enable_high: Polarity of enable GPIO
- * 1 = Active high, 0 = Active low
* @enabled_at_boot: Whether regulator has been enabled at
* boot or not. 1 = Yes, 0 = No
* This is used to keep the regulator at
@@ -48,8 +40,6 @@ struct fixed_voltage_config {
const char *input_supply;
int microvolts;
unsigned startup_delay;
- unsigned gpio_is_open_drain:1;
- unsigned enable_high:1;
unsigned enabled_at_boot:1;
struct regulator_init_data *init_data;
};
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
index 19fbd267406d..11cd6375215d 100644
--- a/include/linux/regulator/gpio-regulator.h
+++ b/include/linux/regulator/gpio-regulator.h
@@ -21,6 +21,8 @@
#ifndef __REGULATOR_GPIO_H
#define __REGULATOR_GPIO_H
+#include <linux/gpio/consumer.h>
+
struct regulator_init_data;
enum regulator_type;
@@ -44,18 +46,14 @@ struct gpio_regulator_state {
/**
* struct gpio_regulator_config - config structure
* @supply_name: Name of the regulator supply
- * @enable_gpio: GPIO to use for enable control
- * set to -EINVAL if not used
- * @enable_high: Polarity of enable GPIO
- * 1 = Active high, 0 = Active low
* @enabled_at_boot: Whether regulator has been enabled at
* boot or not. 1 = Yes, 0 = No
* This is used to keep the regulator at
* the default state
* @startup_delay: Start-up time in microseconds
- * @gpios: Array containing the gpios needed to control
- * the setting of the regulator
- * @nr_gpios: Number of gpios
+ * @gflags: Array of GPIO configuration flags for initial
+ * states
+ * @ngpios: Number of GPIOs and configurations available
* @states: Array of gpio_regulator_state entries describing
* the gpio state for specific voltages
* @nr_states: Number of states available
@@ -69,13 +67,11 @@ struct gpio_regulator_state {
struct gpio_regulator_config {
const char *supply_name;
- int enable_gpio;
- unsigned enable_high:1;
unsigned enabled_at_boot:1;
unsigned startup_delay;
- struct gpio *gpios;
- int nr_gpios;
+ enum gpiod_flags *gflags;
+ int ngpios;
struct gpio_regulator_state *states;
int nr_states;