diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/mxs-spi.txt | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-mxs.c | 21 |
2 files changed, 19 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt index c36296f5ad28..e2e13957c2a4 100644 --- a/Documentation/devicetree/bindings/spi/mxs-spi.txt +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt @@ -6,6 +6,10 @@ Required properties: - interrupts: Should contain SSP interrupts (error irq first, dma irq second) - fsl,ssp-dma-channel: APBX DMA channel for the SSP +Optional properties: +- clock-frequency : Input clock frequency to the SPI block in Hz. + Default is 160000000 Hz. + Example: ssp0: ssp@80010000 { diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 556e5ef907fa..edf1360ab09e 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -520,10 +520,17 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev) struct pinctrl *pinctrl; struct clk *clk; void __iomem *base; - int devid, dma_channel; + int devid, dma_channel, clk_freq; int ret = 0, irq_err, irq_dma; dma_cap_mask_t mask; + /* + * Default clock speed for the SPI core. 160MHz seems to + * work reasonably well with most SPI flashes, so use this + * as a default. Override with "clock-frequency" DT prop. + */ + const int clk_freq_default = 160000000; + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq_err = platform_get_irq(pdev, 0); irq_dma = platform_get_irq(pdev, 1); @@ -555,12 +562,18 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev) "Failed to get DMA channel\n"); return -EINVAL; } + + ret = of_property_read_u32(np, "clock-frequency", + &clk_freq); + if (ret) + clk_freq = clk_freq_default; } else { dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); if (!dmares) return -EINVAL; devid = pdev->id_entry->driver_data; dma_channel = dmares->start; + clk_freq = clk_freq_default; } master = spi_alloc_master(&pdev->dev, sizeof(*spi)); @@ -598,12 +611,8 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev) goto out_master_free; } - /* - * Crank up the clock to 120MHz, this will be further divided onto a - * proper speed. - */ clk_prepare_enable(ssp->clk); - clk_set_rate(ssp->clk, 120 * 1000 * 1000); + clk_set_rate(ssp->clk, clk_freq); ssp->clk_rate = clk_get_rate(ssp->clk) / 1000; stmp_reset_block(ssp->base); |