diff options
-rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 0b7b91ffb71b..9280d96bb291 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -3622,6 +3622,268 @@ static inline void mlxsw_reg_raltb_pack(char *payload, u16 virtual_router, mlxsw_reg_raltb_tree_id_set(payload, tree_id); } +/* RALUE - Router Algorithmic LPM Unicast Entry Register + * ----------------------------------------------------- + * RALUE is used to configure and query LPM entries that serve + * the Unicast protocols. + */ +#define MLXSW_REG_RALUE_ID 0x8013 +#define MLXSW_REG_RALUE_LEN 0x38 + +static const struct mlxsw_reg_info mlxsw_reg_ralue = { + .id = MLXSW_REG_RALUE_ID, + .len = MLXSW_REG_RALUE_LEN, +}; + +/* reg_ralue_protocol + * Protocol. + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, protocol, 0x00, 24, 4); + +enum mlxsw_reg_ralue_op { + /* Read operation. If entry doesn't exist, the operation fails. */ + MLXSW_REG_RALUE_OP_QUERY_READ = 0, + /* Clear on read operation. Used to read entry and + * clear Activity bit. + */ + MLXSW_REG_RALUE_OP_QUERY_CLEAR = 1, + /* Write operation. Used to write a new entry to the table. All RW + * fields are written for new entry. Activity bit is set + * for new entries. + */ + MLXSW_REG_RALUE_OP_WRITE_WRITE = 0, + /* Update operation. Used to update an existing route entry and + * only update the RW fields that are detailed in the field + * op_u_mask. If entry doesn't exist, the operation fails. + */ + MLXSW_REG_RALUE_OP_WRITE_UPDATE = 1, + /* Clear activity. The Activity bit (the field a) is cleared + * for the entry. + */ + MLXSW_REG_RALUE_OP_WRITE_CLEAR = 2, + /* Delete operation. Used to delete an existing entry. If entry + * doesn't exist, the operation fails. + */ + MLXSW_REG_RALUE_OP_WRITE_DELETE = 3, +}; + +/* reg_ralue_op + * Operation. + * Access: OP + */ +MLXSW_ITEM32(reg, ralue, op, 0x00, 20, 3); + +/* reg_ralue_a + * Activity. Set for new entries. Set if a packet lookup has hit on the + * specific entry, only if the entry is a route. To clear the a bit, use + * "clear activity" op. + * Enabled by activity_dis in RGCR + * Access: RO + */ +MLXSW_ITEM32(reg, ralue, a, 0x00, 16, 1); + +/* reg_ralue_virtual_router + * Virtual Router ID + * Range is 0..cap_max_virtual_routers-1 + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, virtual_router, 0x04, 16, 16); + +#define MLXSW_REG_RALUE_OP_U_MASK_ENTRY_TYPE BIT(0) +#define MLXSW_REG_RALUE_OP_U_MASK_BMP_LEN BIT(1) +#define MLXSW_REG_RALUE_OP_U_MASK_ACTION BIT(2) + +/* reg_ralue_op_u_mask + * opcode update mask. + * On read operation, this field is reserved. + * This field is valid for update opcode, otherwise - reserved. + * This field is a bitmask of the fields that should be updated. + * Access: WO + */ +MLXSW_ITEM32(reg, ralue, op_u_mask, 0x04, 8, 3); + +/* reg_ralue_prefix_len + * Number of bits in the prefix of the LPM route. + * Note that for IPv6 prefixes, if prefix_len>64 the entry consumes + * two entries in the physical HW table. + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, prefix_len, 0x08, 0, 8); + +/* reg_ralue_dip* + * The prefix of the route or of the marker that the object of the LPM + * is compared with. The most significant bits of the dip are the prefix. + * The list significant bits must be '0' if the prefix_len is smaller + * than 128 for IPv6 or smaller than 32 for IPv4. + * IPv4 address uses bits dip[31:0] and bits dip[127:32] are reserved. + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, dip4, 0x18, 0, 32); + +enum mlxsw_reg_ralue_entry_type { + MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_ENTRY = 1, + MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY = 2, + MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_AND_ROUTE_ENTRY = 3, +}; + +/* reg_ralue_entry_type + * Entry type. + * Note - for Marker entries, the action_type and action fields are reserved. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, entry_type, 0x1C, 30, 2); + +/* reg_ralue_bmp_len + * The best match prefix length in the case that there is no match for + * longer prefixes. + * If (entry_type != MARKER_ENTRY), bmp_len must be equal to prefix_len + * Note for any update operation with entry_type modification this + * field must be set. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, bmp_len, 0x1C, 16, 8); + +enum mlxsw_reg_ralue_action_type { + MLXSW_REG_RALUE_ACTION_TYPE_REMOTE, + MLXSW_REG_RALUE_ACTION_TYPE_LOCAL, + MLXSW_REG_RALUE_ACTION_TYPE_IP2ME, +}; + +/* reg_ralue_action_type + * Action Type + * Indicates how the IP address is connected. + * It can be connected to a local subnet through local_erif or can be + * on a remote subnet connected through a next-hop router, + * or transmitted to the CPU. + * Reserved when entry_type = MARKER_ENTRY + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, action_type, 0x1C, 0, 2); + +enum mlxsw_reg_ralue_trap_action { + MLXSW_REG_RALUE_TRAP_ACTION_NOP, + MLXSW_REG_RALUE_TRAP_ACTION_TRAP, + MLXSW_REG_RALUE_TRAP_ACTION_MIRROR_TO_CPU, + MLXSW_REG_RALUE_TRAP_ACTION_MIRROR, + MLXSW_REG_RALUE_TRAP_ACTION_DISCARD_ERROR, +}; + +/* reg_ralue_trap_action + * Trap action. + * For IP2ME action, only NOP and MIRROR are possible. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, trap_action, 0x20, 28, 4); + +/* reg_ralue_trap_id + * Trap ID to be reported to CPU. + * Trap ID is RTR_INGRESS0 or RTR_INGRESS1. + * For trap_action of NOP, MIRROR and DISCARD_ERROR, trap_id is reserved. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, trap_id, 0x20, 0, 9); + +/* reg_ralue_adjacency_index + * Points to the first entry of the group-based ECMP. + * Only relevant in case of REMOTE action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, adjacency_index, 0x24, 0, 24); + +/* reg_ralue_ecmp_size + * Amount of sequential entries starting + * from the adjacency_index (the number of ECMPs). + * The valid range is 1-64, 512, 1024, 2048 and 4096. + * Reserved when trap_action is TRAP or DISCARD_ERROR. + * Only relevant in case of REMOTE action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, ecmp_size, 0x28, 0, 13); + +/* reg_ralue_local_erif + * Egress Router Interface. + * Only relevant in case of LOCAL action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, local_erif, 0x24, 0, 16); + +/* reg_ralue_v + * Valid bit for the tunnel_ptr field. + * If valid = 0 then trap to CPU as IP2ME trap ID. + * If valid = 1 and the packet format allows NVE or IPinIP tunnel + * decapsulation then tunnel decapsulation is done. + * If valid = 1 and packet format does not allow NVE or IPinIP tunnel + * decapsulation then trap as IP2ME trap ID. + * Only relevant in case of IP2ME action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, v, 0x24, 31, 1); + +/* reg_ralue_tunnel_ptr + * Tunnel Pointer for NVE or IPinIP tunnel decapsulation. + * For Spectrum, pointer to KVD Linear. + * Only relevant in case of IP2ME action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, tunnel_ptr, 0x24, 0, 24); + +static inline void mlxsw_reg_ralue_pack(char *payload, + enum mlxsw_reg_ralxx_protocol protocol, + enum mlxsw_reg_ralue_op op, + u16 virtual_router, u8 prefix_len) +{ + MLXSW_REG_ZERO(ralue, payload); + mlxsw_reg_ralue_protocol_set(payload, protocol); + mlxsw_reg_ralue_virtual_router_set(payload, virtual_router); + mlxsw_reg_ralue_prefix_len_set(payload, prefix_len); + mlxsw_reg_ralue_entry_type_set(payload, + MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY); + mlxsw_reg_ralue_bmp_len_set(payload, prefix_len); +} + +static inline void mlxsw_reg_ralue_pack4(char *payload, + enum mlxsw_reg_ralxx_protocol protocol, + enum mlxsw_reg_ralue_op op, + u16 virtual_router, u8 prefix_len, + u32 dip) +{ + mlxsw_reg_ralue_pack(payload, protocol, op, virtual_router, prefix_len); + mlxsw_reg_ralue_dip4_set(payload, dip); +} + +static inline void +mlxsw_reg_ralue_act_remote_pack(char *payload, + enum mlxsw_reg_ralue_trap_action trap_action, + u16 trap_id, u32 adjacency_index, u16 ecmp_size) +{ + mlxsw_reg_ralue_action_type_set(payload, + MLXSW_REG_RALUE_ACTION_TYPE_REMOTE); + mlxsw_reg_ralue_trap_action_set(payload, trap_action); + mlxsw_reg_ralue_trap_id_set(payload, trap_id); + mlxsw_reg_ralue_adjacency_index_set(payload, adjacency_index); + mlxsw_reg_ralue_ecmp_size_set(payload, ecmp_size); +} + +static inline void +mlxsw_reg_ralue_act_local_pack(char *payload, + enum mlxsw_reg_ralue_trap_action trap_action, + u16 trap_id, u16 local_erif) +{ + mlxsw_reg_ralue_action_type_set(payload, + MLXSW_REG_RALUE_ACTION_TYPE_LOCAL); + mlxsw_reg_ralue_trap_action_set(payload, trap_action); + mlxsw_reg_ralue_trap_id_set(payload, trap_id); + mlxsw_reg_ralue_local_erif_set(payload, local_erif); +} + +static inline void +mlxsw_reg_ralue_act_ip2me_pack(char *payload) +{ + mlxsw_reg_ralue_action_type_set(payload, + MLXSW_REG_RALUE_ACTION_TYPE_IP2ME); +} + /* MFCR - Management Fan Control Register * -------------------------------------- * This register controls the settings of the Fan Speed PWM mechanism. @@ -4370,6 +4632,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "RALST"; case MLXSW_REG_RALTB_ID: return "RALTB"; + case MLXSW_REG_RALUE_ID: + return "RALUE"; case MLXSW_REG_MFCR_ID: return "MFCR"; case MLXSW_REG_MFSC_ID: |