summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/ide/Kconfig22
-rw-r--r--drivers/ide/ide-dma.c5
-rw-r--r--drivers/ide/ide-io.c5
-rw-r--r--drivers/ide/ide-iops.c8
-rw-r--r--drivers/ide/ide-probe.c5
-rw-r--r--drivers/ide/ide-taskfile.c3
-rw-r--r--drivers/ide/pci/piix.c1
-rw-r--r--include/linux/ide.h9
8 files changed, 39 insertions, 19 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6eaece96524e..d1e8df187222 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -152,9 +152,22 @@ config BLK_DEV_IDEDISK
If unsure, say Y.
config IDEDISK_MULTI_MODE
- bool "Use multi-mode by default"
- help
- If you get this error, try to say Y here:
+ bool "Use multiple sector mode for Programmed Input/Output by default"
+ help
+ This setting is irrelevant for most IDE disks, with direct memory
+ access, to which multiple sector mode does not apply. Multiple sector
+ mode is a feature of most modern IDE hard drives, permitting the
+ transfer of multiple sectors per Programmed Input/Output interrupt,
+ rather than the usual one sector per interrupt. When this feature is
+ enabled, it can reduce operating system overhead for disk Programmed
+ Input/Output. On some systems, it also can increase the data
+ throughput of Programmed Input/Output. Some drives, however, seemed
+ to run slower with multiple sector mode enabled. Some drives claimed
+ to support multiple sector mode, but lost data at some settings.
+ Under rare circumstances, such failures could result in massive
+ filesystem corruption.
+
+ If you get the following error, try to say Y here:
hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }
@@ -380,9 +393,10 @@ config IDEPCI_SHARE_IRQ
config IDEPCI_PCIBUS_ORDER
def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI
+# TODO: split it on per host driver config options (or module parameters)
config BLK_DEV_OFFBOARD
bool "Boot off-board chipsets first support"
- depends on BLK_DEV_IDEPCI
+ depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
help
Normally, IDE controllers built into the motherboard (on-board
controllers) are assigned to ide0 and ide1 while those on add-in PCI
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 428f7a8a00b6..e3add70b9cd8 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -340,7 +340,7 @@ static int config_drive_for_dma (ide_drive_t *drive)
if (drive->media != ide_disk) {
if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
- return -1;
+ return 0;
}
/*
@@ -752,7 +752,8 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
mode = XFER_MW_DMA_1;
}
- printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
+ printk(KERN_DEBUG "%s: %s mode selected\n", drive->name,
+ mode ? ide_xfer_verbose(mode) : "no DMA");
return min(mode, req_mode);
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index c89f0d3058e9..755011827afa 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -340,6 +340,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
if (args) {
args[0] = stat;
args[1] = err;
+ /* be sure we're looking at the low order bits */
+ hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG);
args[2] = hwif->INB(IDE_NSECTOR_REG);
args[3] = hwif->INB(IDE_SECTOR_REG);
args[4] = hwif->INB(IDE_LCYL_REG);
@@ -654,7 +656,8 @@ static ide_startstop_t drive_cmd_intr (ide_drive_t *drive)
int retries = 10;
local_irq_enable_in_hardirq();
- if ((stat & DRQ_STAT) && args && args[3]) {
+ if (rq->cmd_type == REQ_TYPE_ATA_CMD &&
+ (stat & DRQ_STAT) && args && args[3]) {
u8 io_32bit = drive->io_32bit;
drive->io_32bit = 0;
hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index dcda0f109df5..e17a9ee120ea 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -403,8 +403,12 @@ void ide_fix_driveid (struct hd_driveid *id)
#endif
}
-/* FIXME: exported for use by the USB storage (isd200.c) code only */
-EXPORT_SYMBOL(ide_fix_driveid);
+/*
+ * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
+ * removing leading/trailing blanks and compressing internal blanks.
+ * It is primarily used to tidy up the model name/number fields as
+ * returned by the WIN_[P]IDENTIFY commands.
+ */
void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
{
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 6a6f2e066b46..56fb0b843429 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -172,11 +172,12 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
ide_fixstring(id->fw_rev, sizeof(id->fw_rev), bswap);
ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap);
+ /* we depend on this a lot! */
+ id->model[sizeof(id->model)-1] = '\0';
+
if (strstr(id->model, "E X A B Y T E N E S T"))
goto err_misc;
- /* we depend on this a lot! */
- id->model[sizeof(id->model)-1] = '\0';
printk("%s: %s, ", drive->name, id->model);
drive->present = 1;
drive->dead = 0;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index d066546f2831..2b60f1b0437e 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -471,6 +471,7 @@ static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long
struct request rq;
memset(&rq, 0, sizeof(rq));
+ rq.ref_count = 1;
rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
rq.buffer = buf;
@@ -511,6 +512,7 @@ int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, u8 *buf)
EXPORT_SYMBOL(ide_raw_taskfile);
+#ifdef CONFIG_IDE_TASK_IOCTL
int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
{
ide_task_request_t *req_task;
@@ -660,6 +662,7 @@ abort:
return err;
}
+#endif
int ide_wait_cmd (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
{
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 9329d4a810e5..63625a0be712 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -302,6 +302,7 @@ struct ich_laptop {
static const struct ich_laptop ich_laptop[] = {
/* devid, subvendor, subdev */
+ { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 4ed4777bba67..dc75ccbcf991 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1031,14 +1031,7 @@ ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
extern void ide_fix_driveid(struct hd_driveid *);
-/*
- * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
- * removing leading/trailing blanks and compressing internal blanks.
- * It is primarily used to tidy up the model name/number fields as
- * returned by the WIN_[P]IDENTIFY commands.
- *
- * (s, bytecount, byteswap)
- */
+
extern void ide_fixstring(u8 *, const int, const int);
int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 08:05:54 +0000