summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/mips/Kbuild.platforms1
-rw-r--r--arch/mips/Kconfig21
-rw-r--r--arch/mips/Makefile7
-rw-r--r--arch/mips/configs/lasat_defconfig55
-rw-r--r--arch/mips/include/asm/lasat/ds1603.h19
-rw-r--r--arch/mips/include/asm/lasat/eeprom.h18
-rw-r--r--arch/mips/include/asm/lasat/head.h23
-rw-r--r--arch/mips/include/asm/lasat/lasat.h245
-rw-r--r--arch/mips/include/asm/lasat/lasatint.h15
-rw-r--r--arch/mips/include/asm/lasat/picvue.h16
-rw-r--r--arch/mips/include/asm/lasat/serial.h14
-rw-r--r--arch/mips/include/asm/mach-lasat/irq.h14
-rw-r--r--arch/mips/include/asm/mach-lasat/mach-gt64120.h28
-rw-r--r--arch/mips/include/asm/nile4.h310
-rw-r--r--arch/mips/lasat/Kconfig16
-rw-r--r--arch/mips/lasat/Makefile15
-rw-r--r--arch/mips/lasat/Platform7
-rw-r--r--arch/mips/lasat/at93c.c148
-rw-r--r--arch/mips/lasat/at93c.h19
-rw-r--r--arch/mips/lasat/ds1603.c190
-rw-r--r--arch/mips/lasat/ds1603.h32
-rw-r--r--arch/mips/lasat/image/Makefile53
-rw-r--r--arch/mips/lasat/image/head.S32
-rw-r--r--arch/mips/lasat/image/romscript.normal23
-rw-r--r--arch/mips/lasat/interrupt.c119
-rw-r--r--arch/mips/lasat/lasat_board.c268
-rw-r--r--arch/mips/lasat/lasat_models.h68
-rw-r--r--arch/mips/lasat/picvue.c242
-rw-r--r--arch/mips/lasat/picvue.h45
-rw-r--r--arch/mips/lasat/picvue_proc.c208
-rw-r--r--arch/mips/lasat/prom.c126
-rw-r--r--arch/mips/lasat/prom.h8
-rw-r--r--arch/mips/lasat/reset.c48
-rw-r--r--arch/mips/lasat/serial.c80
-rw-r--r--arch/mips/lasat/setup.c141
-rw-r--r--arch/mips/lasat/sysctl.c268
-rw-r--r--arch/mips/pci/Makefile2
-rw-r--r--arch/mips/pci/ops-nile4.c136
-rw-r--r--arch/mips/pci/pci-lasat.c88
39 files changed, 0 insertions, 3168 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index a69b272a3ab0..9f9b4164d4c9 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -16,7 +16,6 @@ platforms += generic
platforms += jazz
platforms += jz4740
platforms += lantiq
-platforms += lasat
platforms += loongson2ef
platforms += loongson32
platforms += loongson64
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9f15539a6342..0aaab09bdea6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -431,23 +431,6 @@ config LANTIQ
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
-config LASAT
- bool "LASAT Networks platforms"
- select CEVT_R4K
- select CRC32
- select CSRC_R4K
- select DMA_NONCOHERENT
- select SYS_HAS_EARLY_PRINTK
- select HAVE_PCI
- select IRQ_MIPS_CPU
- select PCI_GT64XXX_PCI0
- select MIPS_NILE4
- select R5000_CPU_SCACHE
- select SYS_HAS_CPU_R5000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
config MACH_LOONGSON32
bool "Loongson 32-bit family of machines"
select SYS_SUPPORTS_ZBOOT
@@ -1091,7 +1074,6 @@ source "arch/mips/generic/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
-source "arch/mips/lasat/Kconfig"
source "arch/mips/pic32/Kconfig"
source "arch/mips/pistachio/Kconfig"
source "arch/mips/pmcs-msp71xx/Kconfig"
@@ -1215,9 +1197,6 @@ config MIPS_BONITO64
config MIPS_MSC
bool
-config MIPS_NILE4
- bool
-
config SYNC_R4K
bool
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index b6ee29e4565a..ef15caa4d320 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -370,12 +370,6 @@ ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
bootz-y += uzImage.bin
endif
-ifdef CONFIG_LASAT
-rom.bin rom.sw: vmlinux
- $(Q)$(MAKE) $(build)=arch/mips/lasat/image \
- $(bootvars-y) $@
-endif
-
#
# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -441,7 +435,6 @@ archclean:
$(Q)$(MAKE) $(clean)=arch/mips/boot
$(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
$(Q)$(MAKE) $(clean)=arch/mips/boot/tools
- $(Q)$(MAKE) $(clean)=arch/mips/lasat
archheaders:
$(Q)$(MAKE) $(build)=arch/mips/kernel/syscalls all
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
deleted file mode 100644
index 00cf461db971..000000000000
--- a/arch/mips/configs/lasat_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_LASAT=y
-CONFIG_PICVUE=y
-CONFIG_PICVUE_PROC=y
-CONFIG_DS1603=y
-CONFIG_LASAT_SYSCTL=y
-CONFIG_HZ_1000=y
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_CMD64X=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_RAW=y
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h
deleted file mode 100644
index ab833be9637d..000000000000
--- a/arch/mips/include/asm/lasat/ds1603.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/addrspace.h>
-
-/* Lasat 100 */
-#define DS1603_REG_100 (KSEG1ADDR(0x1c810000))
-#define DS1603_RST_100 (1 << 2)
-#define DS1603_CLK_100 (1 << 0)
-#define DS1603_DATA_SHIFT_100 1
-#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100)
-
-/* Lasat 200 */
-#define DS1603_REG_200 (KSEG1ADDR(0x11000000))
-#define DS1603_RST_200 (1 << 3)
-#define DS1603_CLK_200 (1 << 4)
-#define DS1603_DATA_200 (1 << 5)
-
-#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000)
-#define DS1603_DATA_READ_SHIFT_200 9
-#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h
deleted file mode 100644
index 24001a5cbb11..000000000000
--- a/arch/mips/include/asm/lasat/eeprom.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/addrspace.h>
-
-/* lasat 100 */
-#define AT93C_REG_100 KSEG1ADDR(0x1c810000)
-#define AT93C_RDATA_REG_100 AT93C_REG_100
-#define AT93C_RDATA_SHIFT_100 4
-#define AT93C_WDATA_SHIFT_100 4
-#define AT93C_CS_M_100 (1 << 5)
-#define AT93C_CLK_M_100 (1 << 3)
-
-/* lasat 200 */
-#define AT93C_REG_200 KSEG1ADDR(0x11000000)
-#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000)
-#define AT93C_RDATA_SHIFT_200 8
-#define AT93C_WDATA_SHIFT_200 2
-#define AT93C_CS_M_200 (1 << 0)
-#define AT93C_CLK_M_200 (1 << 1)
diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h
deleted file mode 100644
index 20b0ecedd4b5..000000000000
--- a/arch/mips/include/asm/lasat/head.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Image header stuff
- */
-#ifndef _HEAD_H
-#define _HEAD_H
-
-#define LASAT_K_MAGIC0_VAL 0xfedeabba
-#define LASAT_K_MAGIC1_VAL 0x00bedead
-
-#ifndef _LANGUAGE_ASSEMBLY
-#include <linux/types.h>
-struct bootloader_header {
- u32 magic[2];
- u32 version;
- u32 image_start;
- u32 image_size;
- u32 kernel_start;
- u32 kernel_entry;
-};
-#endif
-
-#endif /* _HEAD_H */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
deleted file mode 100644
index 483be606960d..000000000000
--- a/arch/mips/include/asm/lasat/lasat.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * lasat.h
- *
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Configuration for LASAT boards, loads the appropriate include files.
- */
-#ifndef _LASAT_H
-#define _LASAT_H
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-extern struct lasat_misc {
- volatile u32 *reset_reg;
- volatile u32 *flash_wp_reg;
- u32 flash_wp_bit;
-} *lasat_misc;
-
-enum lasat_mtdparts {
- LASAT_MTD_BOOTLOADER,
- LASAT_MTD_SERVICE,
- LASAT_MTD_NORMAL,
- LASAT_MTD_CONFIG,
- LASAT_MTD_FS,
- LASAT_MTD_LAST
-};
-
-/*
- * The format of the data record in the EEPROM.
- * See the LASAT Hardware Configuration field specification for a detailed
- * description of the config field.
- */
-#include <linux/types.h>
-
-#define LASAT_EEPROM_VERSION 7
-struct lasat_eeprom_struct {
- unsigned int version;
- unsigned int cfg[3];
- unsigned char hwaddr[6];
- unsigned char print_partno[12];
- unsigned char term0;
- unsigned char print_serial[14];
- unsigned char term1;
- unsigned char prod_partno[12];
- unsigned char term2;
- unsigned char prod_serial[14];
- unsigned char term3;
- unsigned char passwd_hash[16];
- unsigned char pwdnull;
- unsigned char vendid;
- unsigned char ts_ref;
- unsigned char ts_signoff;
- unsigned char reserved[11];
- unsigned char debugaccess;
- unsigned short prid;
- unsigned int serviceflag;
- unsigned int ipaddr;
- unsigned int netmask;
- unsigned int crc32;
-};
-
-struct lasat_eeprom_struct_pre7 {
- unsigned int version;
- unsigned int flags[3];
- unsigned char hwaddr0[6];
- unsigned char hwaddr1[6];
- unsigned char print_partno[9];
- unsigned char term0;
- unsigned char print_serial[14];
- unsigned char term1;
- unsigned char prod_partno[9];
- unsigned char term2;
- unsigned char prod_serial[14];
- unsigned char term3;
- unsigned char passwd_hash[24];
- unsigned char pwdnull;
- unsigned char vendor;
- unsigned char ts_ref;
- unsigned char ts_signoff;
- unsigned char reserved[6];
- unsigned int writecount;
- unsigned int ipaddr;
- unsigned int netmask;
- unsigned int crc32;
-};
-
-/* Configuration descriptor encoding - see the doc for details */
-
-#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf)
-#define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf)
-#define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf)
-#define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf)
-#define LASAT_W0_CPUCLK(v) (((v) >> 0x10) & 0xf)
-#define LASAT_W0_SDRAMBANKSZ(v) (((v) >> 0x14) & 0xf)
-#define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf)
-#define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf)
-
-#define LASAT_W1_EDHAC(v) (((v)) & 0xf)
-#define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1)
-#define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1)
-#define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1)
-#define LASAT_W1_HDLC(v) (((v) >> 0x07) & 0x1)
-#define LASAT_W1_USVERSION(v) (((v) >> 0x08) & 0x1)
-#define LASAT_W1_4MACS(v) (((v) >> 0x09) & 0x1)
-#define LASAT_W1_EXTSERIAL(v) (((v) >> 0x0a) & 0x1)
-#define LASAT_W1_FLASHSIZE(v) (((v) >> 0x0c) & 0xf)
-#define LASAT_W1_PCISLOTS(v) (((v) >> 0x10) & 0xf)
-#define LASAT_W1_PCI1OPT(v) (((v) >> 0x14) & 0xf)
-#define LASAT_W1_PCI2OPT(v) (((v) >> 0x18) & 0xf)
-#define LASAT_W1_PCI3OPT(v) (((v) >> 0x1c) & 0xf)
-
-/* Routines specific to LASAT boards */
-
-#define LASAT_BMID_MASQUERADE2 0
-#define LASAT_BMID_MASQUERADEPRO 1
-#define LASAT_BMID_SAFEPIPE25 2
-#define LASAT_BMID_SAFEPIPE50 3
-#define LASAT_BMID_SAFEPIPE100 4
-#define LASAT_BMID_SAFEPIPE5000 5
-#define LASAT_BMID_SAFEPIPE7000 6
-#define LASAT_BMID_SAFEPIPE1000 7
-#if 0
-#define LASAT_BMID_SAFEPIPE30 7
-#define LASAT_BMID_SAFEPIPE5100 8
-#define LASAT_BMID_SAFEPIPE7100 9
-#endif
-#define LASAT_BMID_UNKNOWN 0xf
-#define LASAT_MAX_BMID_NAMES 9 /* no larger than 15! */
-
-#define LASAT_HAS_EDHAC (1 << 0)
-#define LASAT_EDHAC_FAST (1 << 1)
-#define LASAT_HAS_EADI (1 << 2)
-#define LASAT_HAS_HIFN (1 << 3)
-#define LASAT_HAS_ISDN (1 << 4)
-#define LASAT_HAS_LEASEDLINE_IF (1 << 5)
-#define LASAT_HAS_HDC (1 << 6)
-
-#define LASAT_PRID_MASQUERADE2 0
-#define LASAT_PRID_MASQUERADEPRO 1
-#define LASAT_PRID_SAFEPIPE25 2
-#define LASAT_PRID_SAFEPIPE50 3
-#define LASAT_PRID_SAFEPIPE100 4
-#define LASAT_PRID_SAFEPIPE5000 5
-#define LASAT_PRID_SAFEPIPE7000 6
-#define LASAT_PRID_SAFEPIPE30 7
-#define LASAT_PRID_SAFEPIPE5100 8
-#define LASAT_PRID_SAFEPIPE7100 9
-
-#define LASAT_PRID_SAFEPIPE1110 10
-#define LASAT_PRID_SAFEPIPE3020 11
-#define LASAT_PRID_SAFEPIPE3030 12
-#define LASAT_PRID_SAFEPIPE5020 13
-#define LASAT_PRID_SAFEPIPE5030 14
-#define LASAT_PRID_SAFEPIPE1120 15
-#define LASAT_PRID_SAFEPIPE1130 16
-#define LASAT_PRID_SAFEPIPE6010 17
-#define LASAT_PRID_SAFEPIPE6110 18
-#define LASAT_PRID_SAFEPIPE6210 19
-#define LASAT_PRID_SAFEPIPE1020 20
-#define LASAT_PRID_SAFEPIPE1040 21
-#define LASAT_PRID_SAFEPIPE1060 22
-
-struct lasat_info {
- unsigned int li_cpu_hz;
- unsigned int li_bus_hz;
- unsigned int li_bmid;
- unsigned int li_memsize;
- unsigned int li_flash_size;
- unsigned int li_prid;
- unsigned char li_bmstr[16];
- unsigned char li_namestr[32];
- unsigned char li_typestr[16];
- /* Info on the Flash layout */
- unsigned int li_flash_base;
- unsigned long li_flashpart_base[LASAT_MTD_LAST];
- unsigned long li_flashpart_size[LASAT_MTD_LAST];
- struct lasat_eeprom_struct li_eeprom_info;
- unsigned int li_eeprom_upgrade_version;
- unsigned int li_debugaccess;
-};
-
-extern struct lasat_info lasat_board_info;
-
-static inline unsigned long lasat_flash_partition_start(int partno)
-{
- if (partno < 0 || partno >= LASAT_MTD_LAST)
- return 0;
-
- return lasat_board_info.li_flashpart_base[partno];
-}
-
-static inline unsigned long lasat_flash_partition_size(int partno)
-{
- if (partno < 0 || partno >= LASAT_MTD_LAST)
- return 0;
-
- return lasat_board_info.li_flashpart_size[partno];
-}
-
-/* Called from setup() to initialize the global board_info struct */
-extern int lasat_init_board_info(void);
-
-/* Write the modified EEPROM info struct */
-extern void lasat_write_eeprom_info(void);
-
-#define N_MACHTYPES 2
-/* for calibration of delays */
-
-/* the lasat_ndelay function is necessary because it is used at an
- * early stage of the boot process where ndelay is not calibrated.
- * It is used for the bit-banging rtc and eeprom drivers */
-
-#include <linux/delay.h>
-#include <linux/smp.h>
-
-/* calculating with the slowest board with 100 MHz clock */
-#define LASAT_100_DIVIDER 20
-/* All 200's run at 250 MHz clock */
-#define LASAT_200_DIVIDER 8
-
-extern unsigned int lasat_ndelay_divider;
-
-static inline void lasat_ndelay(unsigned int ns)
-{
- __delay(ns / lasat_ndelay_divider);
-}
-
-#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000)
-
-#endif /* !defined (_LANGUAGE_ASSEMBLY) */
-
-#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef
-#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba
-
-/* Lasat 100 boards */
-#define LASAT_GT_BASE (KSEG1ADDR(0x14000000))
-
-/* Lasat 200 boards */
-#define Vrc5074_PHYS_BASE 0x1fa00000
-#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE))
-#define PCI_WINDOW1 0x1a000000
-
-#endif /* _LASAT_H */
diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h
deleted file mode 100644
index b2b346e0ca38..000000000000
--- a/arch/mips/include/asm/lasat/lasatint.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_LASAT_LASATINT_H
-#define __ASM_LASAT_LASATINT_H
-
-/* lasat 100 */
-#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000))
-#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000))
-#define LASATINT_MASK_SHIFT_100 0
-
-/* lasat 200 */
-#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c))
-#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c))
-#define LASATINT_MASK_SHIFT_200 16
-
-#endif /* __ASM_LASAT_LASATINT_H */
diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h
deleted file mode 100644
index 99987c5a4b83..000000000000
--- a/arch/mips/include/asm/lasat/picvue.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Lasat 100 */
-#define PVC_REG_100 KSEG1ADDR(0x1c820000)
-#define PVC_DATA_SHIFT_100 0
-#define PVC_DATA_M_100 0xFF
-#define PVC_E_100 (1 << 8)
-#define PVC_RW_100 (1 << 9)
-#define PVC_RS_100 (1 << 10)
-
-/* Lasat 200 */
-#define PVC_REG_200 KSEG1ADDR(0x11000000)
-#define PVC_DATA_SHIFT_200 24
-#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200)
-#define PVC_E_200 (1 << 16)
-#define PVC_RW_200 (1 << 17)
-#define PVC_RS_200 (1 << 18)
diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h
deleted file mode 100644
index 7b43d74089d1..000000000000
--- a/arch/mips/include/asm/lasat/serial.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/lasat/lasat.h>
-
-/* Lasat 100 boards serial configuration */
-#define LASAT_BASE_BAUD_100 (7372800 / 16)
-#define LASAT_UART_REGS_BASE_100 0x1c8b0000
-#define LASAT_UART_REGS_SHIFT_100 2
-#define LASATINT_UART_100 16
-
-/* * LASAT 200 boards serial configuration */
-#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
-#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
-#define LASAT_UART_REGS_SHIFT_200 3
-#define LASATINT_UART_200 21
diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h
deleted file mode 100644
index e8994921779e..000000000000
--- a/arch/mips/include/asm/mach-lasat/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_MACH_LASAT_IRQ_H
-#define _ASM_MACH_LASAT_IRQ_H
-
-#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2)
-
-#define LASAT_IRQ_BASE 8
-#define LASAT_IRQ_END 23
-
-#define NR_IRQS 24
-
-#include <asm/mach-generic/irq.h>
-
-#endif /* _ASM_MACH_LASAT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
deleted file mode 100644
index 6666a8871a23..000000000000
--- a/arch/mips/include/asm/mach-lasat/mach-gt64120.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This is a direct copy of the ev96100.h file, with a global
- * search and replace. The numbers are the same.
- *
- * The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
-#define _ASM_GT64120_LASAT_GT64120_DEP_H
-
-/*
- * GT64120 config space base address on Lasat 100
- */
-#define GT64120_BASE (KSEG1ADDR(0x14000000))
-
-/*
- * PCI Bus allocation
- *
- * (Guessing ...)
- */
-#define GT_PCI_MEM_BASE 0x12000000UL
-#define GT_PCI_MEM_SIZE 0x02000000UL
-#define GT_PCI_IO_BASE 0x10000000UL
-#define GT_PCI_IO_SIZE 0x02000000UL
-#define GT_ISA_IO_BASE PCI_IO_BASE
-
-#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
deleted file mode 100644
index 9d36b7823603..000000000000
--- a/arch/mips/include/asm/nile4.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@linux-m68k.org>
- * Sony Software Development Center Europe (SDCE), Brussels
- *
- * This file is based on the following documentation:
- *
- * NEC Vrc 5074 System Controller Data Sheet, June 1998
- */
-
-#ifndef _ASM_NILE4_H
-#define _ASM_NILE4_H
-
-#define NILE4_BASE 0xbfa00000
-#define NILE4_SIZE 0x00200000 /* 2 MB */
-
-
- /*
- * Physical Device Address Registers (PDARs)
- */
-
-#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */
-#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */
-#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */
-#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */
-#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */
-#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */
-#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */
-#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */
-#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */
-#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */
-#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */
-#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */
- /* [R/W] */
-#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */
-
-
- /*
- * CPU Interface Registers
- */
-
-#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */
-#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */
-#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */
-#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */
- /* Enable [R/W] */
-#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */
-#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */
-
-
- /*
- * Memory-Interface Registers
- */
-
-#define NILE4_MEMCTRL 0x00C0 /* Memory Control */
-#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */
-#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */
-
-
- /*
- * PCI-Bus Registers
- */
-
-#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */
-#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */
-#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */
-#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */
-#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */
-
-
- /*
- * Local-Bus Registers
- */
-
-#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */
-#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */
-#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */
-#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */
-#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */
-#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */
-#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */
-#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */
-#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */
- /* Enables [R/W] */
-#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */
-#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */
-
-
- /*
- * DMA Registers
- */
-
-#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */
-#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */
-#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */
-#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */
-#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */
-#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */
-
-
- /*
- * Timer Registers
- */
-
-#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */
-#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */
-#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */
-#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */
-#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */
-#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */
-#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */
-#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */
-
-
- /*
- * PCI Configuration Space Registers
- */
-
-#define NILE4_PCI_BASE 0x0200
-
-#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */
-#define NILE4_DID 0x0202 /* PCI Device ID [R] */
-#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */
-#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */
-#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */
-#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */
-#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */
-#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */
-#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */
-#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */
-#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */
-#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */
-#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */
-#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */
- /* (unimplemented) */
-#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */
-#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */
-#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */
- /* (unimplemented) */
-#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */
-#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */
-#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */
-#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */
-#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */
-#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */
-#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */
-#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */
-#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */
-#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */
-#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */
-#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */
-
-
- /*
- * Serial-Port Registers
- */
-
-#define NILE4_UART_BASE 0x0300
-
-#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */
-#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */
-#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */
-#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */
-#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */
-#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */
-#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */
-#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */
-#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */
-#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */
-#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */
-#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */
-
-#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */
-
-
- /*
- * Interrupt Lines
- */
-
-#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */
-#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */
-#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */
-#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */
-#define NILE4_INT_UART 4 /* UART Interrupt */
-#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */
-#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */
-#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */
-#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */
-#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */
-#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */
-#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */
-#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */
-#define NILE4_INT_RESV 13 /* Reserved */
-#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */
-#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */
-
-
- /*
- * Nile 4 Register Access
- */
-
-static inline void nile4_sync(void)
-{
- volatile u32 *p = (volatile u32 *)0xbfc00000;
- (void)(*p);
-}
-
-static inline void nile4_out32(u32 offset, u32 val)
-{
- *(volatile u32 *)(NILE4_BASE+offset) = val;
- nile4_sync();
-}
-
-static inline u32 nile4_in32(u32 offset)
-{
- u32 val = *(volatile u32 *)(NILE4_BASE+offset);
- nile4_sync();
- return val;
-}
-
-static inline void nile4_out16(u32 offset, u16 val)
-{
- *(volatile u16 *)(NILE4_BASE+offset) = val;
- nile4_sync();
-}
-
-static inline u16 nile4_in16(u32 offset)
-{
- u16 val = *(volatile u16 *)(NILE4_BASE+offset);
- nile4_sync();
- return val;
-}
-
-static inline void nile4_out8(u32 offset, u8 val)
-{
- *(volatile u8 *)(NILE4_BASE+offset) = val;
- nile4_sync();
-}
-
-static inline u8 nile4_in8(u32 offset)
-{
- u8 val = *(volatile u8 *)(NILE4_BASE+offset);
- nile4_sync();
- return val;
-}
-
-
- /*
- * Physical Device Address Registers
- */
-
-extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
- int on_memory_bus, int visible);
-
-
- /*
- * PCI Master Registers
- */
-
-#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */
-#define NILE4_PCICMD_IO 1 /* PCI I/O Space */
-#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */
-#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */
-
-
- /*
- * PCI Address Spaces
- *
- * Note that these are multiplexed using PCIINIT[01]!
- */
-
-#define NILE4_PCI_IO_BASE 0xa6000000
-#define NILE4_PCI_MEM_BASE 0xa8000000
-#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE
-#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE
-
-
-extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
-
-
- /*
- * Interrupt Programming
- */
-
-#define NUM_I8259_INTERRUPTS 16
-#define NUM_NILE4_INTERRUPTS 16
-
-#define IRQ_I8259_CASCADE NILE4_INT_INTE
-#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS)
-#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS)
-#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS)
-
-extern void nile4_map_irq(int nile4_irq, int cpu_irq);
-extern void nile4_map_irq_all(int cpu_irq);
-extern void nile4_enable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq_all(void);
-extern u16 nile4_get_irq_stat(int cpu_irq);
-extern void nile4_enable_irq_output(int cpu_irq);
-extern void nile4_disable_irq_output(int cpu_irq);
-extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
-extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
-extern void nile4_clear_irq(int nile4_irq);
-extern void nile4_clear_irq_mask(u32 mask);
-extern u8 nile4_i8259_iack(void);
-extern void nile4_dump_irq_status(void); /* Debug */
-
-#endif
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
deleted file mode 100644
index 11b89e94b835..000000000000
--- a/arch/mips/lasat/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config PICVUE
- tristate "PICVUE LCD display driver"
- depends on LASAT
-
-config PICVUE_PROC
- tristate "PICVUE LCD display driver /proc interface"
- depends on PICVUE && PROC_FS
-
-config DS1603
- bool "DS1603 RTC driver"
- depends on LASAT
-
-config LASAT_SYSCTL
- bool "LASAT sysctl interface"
- depends on LASAT
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile
deleted file mode 100644
index 1789b227ef20..000000000000
--- a/arch/mips/lasat/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the LASAT specific kernel interface routines under Linux.
-#
-
-obj-y += reset.o setup.o prom.o lasat_board.o \
- at93c.o interrupt.o serial.o
-
-obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o
-obj-$(CONFIG_DS1603) += ds1603.o
-obj-$(CONFIG_PICVUE) += picvue.o
-obj-$(CONFIG_PICVUE_PROC) += picvue_proc.o
-
-clean:
- make -C image clean
diff --git a/arch/mips/lasat/Platform b/arch/mips/lasat/Platform
deleted file mode 100644
index 760252828bf1..000000000000
--- a/arch/mips/lasat/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# LASAT platforms
-#
-platform-$(CONFIG_LASAT) += lasat/
-cflags-$(CONFIG_LASAT) += \
- -I$(srctree)/arch/mips/include/asm/mach-lasat
-load-$(CONFIG_LASAT) += 0xffffffff80000000
diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c
deleted file mode 100644
index f895fe94b937..000000000000
--- a/arch/mips/lasat/at93c.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/lasat/lasat.h>
-
-#include "at93c.h"
-
-#define AT93C_ADDR_SHIFT 7
-#define AT93C_ADDR_MAX ((1 << AT93C_ADDR_SHIFT) - 1)
-#define AT93C_RCMD (0x6 << AT93C_ADDR_SHIFT)
-#define AT93C_WCMD (0x5 << AT93C_ADDR_SHIFT)
-#define AT93C_WENCMD 0x260
-#define AT93C_WDSCMD 0x200
-
-struct at93c_defs *at93c;
-
-static void at93c_reg_write(u32 val)
-{
- *at93c->reg = val;
-}
-
-static u32 at93c_reg_read(void)
-{
- u32 tmp = *at93c->reg;
- return tmp;
-}
-
-static u32 at93c_datareg_read(void)
-{
- u32 tmp = *at93c->rdata_reg;
- return tmp;
-}
-
-static void at93c_cycle_clk(u32 data)
-{
- at93c_reg_write(data | at93c->clk);
- lasat_ndelay(250);
- at93c_reg_write(data & ~at93c->clk);
- lasat_ndelay(250);
-}
-
-static void at93c_write_databit(u8 bit)
-{
- u32 data = at93c_reg_read();
- if (bit)
- data |= 1 << at93c->wdata_shift;
- else
- data &= ~(1 << at93c->wdata_shift);
-
- at93c_reg_write(data);
- lasat_ndelay(100);
- at93c_cycle_clk(data);
-}
-
-static unsigned int at93c_read_databit(void)
-{
- u32 data;
-
- at93c_cycle_clk(at93c_reg_read());
- data = (at93c_datareg_read() >> at93c->rdata_shift) & 1;
- return data;
-}
-
-static u8 at93c_read_byte(void)
-{
- int i;
- u8 data = 0;
-
- for (i = 0; i <= 7; i++) {
- data <<= 1;
- data |= at93c_read_databit();
- }
- return data;
-}
-
-static void at93c_write_bits(u32 data, int size)
-{
- int i;
- int shift = size - 1;
- u32 mask = (1 << shift);
-
- for (i = 0; i < size; i++) {
- at93c_write_databit((data & mask) >> shift);
- data <<= 1;
- }
-}
-
-static void at93c_init_op(void)
-{
- at93c_reg_write((at93c_reg_read() | at93c->cs) &
- ~at93c->clk & ~(1 << at93c->rdata_shift));
- lasat_ndelay(50);
-}
-
-static void at93c_end_op(void)
-{
- at93c_reg_write(at93c_reg_read() & ~at93c->cs);
- lasat_ndelay(250);
-}
-
-static void at93c_wait(void)
-{
- at93c_init_op();
- while (!at93c_read_databit())
- ;
- at93c_end_op();
-};
-
-static void at93c_disable_wp(void)
-{
- at93c_init_op();
- at93c_write_bits(AT93C_WENCMD, 10);
- at93c_end_op();
-}
-
-static void at93c_enable_wp(void)
-{
- at93c_init_op();
- at93c_write_bits(AT93C_WDSCMD, 10);
- at93c_end_op();
-}
-
-u8 at93c_read(u8 addr)
-{
- u8 byte;
- at93c_init_op();
- at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10);
- byte = at93c_read_byte();
- at93c_end_op();
- return byte;
-}
-
-void at93c_write(u8 addr, u8 data)
-{
- at93c_disable_wp();
- at93c_init_op();
- at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10);
- at93c_write_bits(data, 8);
- at93c_end_op();
- at93c_wait();
- at93c_enable_wp();
-}
diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h
deleted file mode 100644
index 7a99a02d81d0..000000000000
--- a/arch/mips/lasat/at93c.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-
-extern struct at93c_defs {
- volatile u32 *reg;
- volatile u32 *rdata_reg;
- int rdata_shift;
- int wdata_shift;
- u32 cs;
- u32 clk;
-} *at93c;
-
-u8 at93c_read(u8 addr);
-void at93c_write(u8 addr, u8 data);
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
deleted file mode 100644
index e6ce39fefa78..000000000000
--- a/arch/mips/lasat/ds1603.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <asm/lasat/lasat.h>
-#include <linux/delay.h>
-#include <asm/lasat/ds1603.h>
-#include <asm/time.h>
-
-#include "ds1603.h"
-
-#define READ_TIME_CMD 0x81
-#define SET_TIME_CMD 0x80
-#define TRIMMER_SET_CMD 0xC0
-#define TRIMMER_VALUE_MASK 0x38
-#define TRIMMER_SHIFT 3
-
-struct ds_defs *ds1603;
-
-/* HW specific register functions */
-static void rtc_reg_write(unsigned long val)
-{
- *ds1603->reg = val;
-}
-
-static unsigned long rtc_reg_read(void)
-{
- unsigned long tmp = *ds1603->reg;
- return tmp;
-}
-
-static unsigned long rtc_datareg_read(void)
-{
- unsigned long tmp = *ds1603->data_reg;
- return tmp;
-}
-
-static void rtc_nrst_high(void)
-{
- rtc_reg_write(rtc_reg_read() | ds1603->rst);
-}
-
-static void rtc_nrst_low(void)
-{
- rtc_reg_write(rtc_reg_read() & ~ds1603->rst);
-}
-
-static void rtc_cycle_clock(unsigned long data)
-{
- data |= ds1603->clk;
- rtc_reg_write(data);
- lasat_ndelay(250);
- if (ds1603->data_reversed)
- data &= ~ds1603->data;
- else
- data |= ds1603->data;
- data &= ~ds1603->clk;
- rtc_reg_write(data);
- lasat_ndelay(250 + ds1603->huge_delay);
-}
-
-static void rtc_write_databit(unsigned int bit)
-{
- unsigned long data = rtc_reg_read();
- if (ds1603->data_reversed)
- bit = !bit;
- if (bit)
- data |= ds1603->data;
- else
- data &= ~ds1603->data;
-
- rtc_reg_write(data);
- lasat_ndelay(50 + ds1603->huge_delay);
- rtc_cycle_clock(data);
-}
-
-static unsigned int rtc_read_databit(void)
-{
- unsigned int data;
-
- data = (rtc_datareg_read() & (1 << ds1603->data_read_shift))
- >> ds1603->data_read_shift;
- rtc_cycle_clock(rtc_reg_read());
- return data;
-}
-
-static void rtc_write_byte(unsigned int byte)
-{
- int i;
-
- for (i = 0; i <= 7; i++) {
- rtc_write_databit(byte & 1L);
- byte >>= 1;
- }
-}
-
-static void rtc_write_word(unsigned long word)
-{
- int i;
-
- for (i = 0; i <= 31; i++) {
- rtc_write_databit(word & 1L);
- word >>= 1;
- }
-}
-
-static unsigned long rtc_read_word(void)
-{
- int i;
- unsigned long word = 0;
- unsigned long shift = 0;
-
- for (i = 0; i <= 31; i++) {
- word |= rtc_read_databit() << shift;
- shift++;
- }
- return word;
-}
-
-static void rtc_init_op(void)
-{
- rtc_nrst_high();
-
- rtc_reg_write(rtc_reg_read() & ~ds1603->clk);
-
- lasat_ndelay(50);
-}
-
-static void rtc_end_op(void)
-{
- rtc_nrst_low();
- lasat_ndelay(1000);
-}
-
-void read_persistent_clock64(struct timespec64 *ts)
-{
- unsigned long word;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- rtc_init_op();
- rtc_write_byte(READ_TIME_CMD);
- word = rtc_read_word();
- rtc_end_op();
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- ts->tv_sec = word;
- ts->tv_nsec = 0;
-}
-
-int update_persistent_clock64(struct timespec64 now)
-{
- time64_t time = now.tv_sec;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- rtc_init_op();
- rtc_write_byte(SET_TIME_CMD);
- /*
- * Due to the hardware limitation, we cast to 'unsigned long' type,
- * so it will overflow in year 2106 on 32-bit machine.
- */
- rtc_write_word((unsigned long)time);
- rtc_end_op();
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
-
-void ds1603_set_trimmer(unsigned int trimval)
-{
- rtc_init_op();
- rtc_write_byte(((trimval << TRIMMER_SHIFT) & TRIMMER_VALUE_MASK)
- | (TRIMMER_SET_CMD));
- rtc_end_op();
-}
-
-void ds1603_disable(void)
-{
- ds1603_set_trimmer(TRIMMER_DISABLE_RTC);
-}
-
-void ds1603_enable(void)
-{
- ds1603_set_trimmer(TRIMMER_DEFAULT);
-}
diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h
deleted file mode 100644
index 00987d3bdc21..000000000000
--- a/arch/mips/lasat/ds1603.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#ifndef __DS1603_H
-#define __DS1603_H
-
-struct ds_defs {
- volatile u32 *reg;
- volatile u32 *data_reg;
- u32 rst;
- u32 clk;
- u32 data;
- u32 data_read_shift;
- char data_reversed;
- u32 huge_delay;
-};
-
-extern struct ds_defs *ds1603;
-
-void ds1603_set_trimmer(unsigned int);
-void ds1603_enable(void);
-void ds1603_disable(void);
-void ds1603_init(struct ds_defs *);
-
-#define TRIMMER_DEFAULT 3
-#define TRIMMER_DISABLE_RTC 0
-
-#endif
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
deleted file mode 100644
index 78ce4cff1012..000000000000
--- a/arch/mips/lasat/image/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# MAKEFILE FOR THE MIPS LINUX BOOTLOADER AND ROM DEBUGGER
-#
-# i-data Networks
-#
-# Author: Thomas Horsten <thh@i-data.com>
-#
-
-ifndef Version
- Version = "$(USER)-test"
-endif
-
-MKLASATIMG = mklasatimg
-MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
-KERNEL_IMAGE = vmlinux
-
-LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
-
-HEAD_DEFINES := -D_kernel_start=$(VMLINUX_LOAD_ADDRESS) \
- -D_kernel_entry=$(VMLINUX_ENTRY_ADDRESS) \
- -D VERSION="\"$(Version)\"" \
- -D TIMESTAMP=$(shell date +%s)
-
-$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
- $(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $<
-
-OBJECTS = head.o kImage.o
-
-rom.sw: $(obj)/rom.sw
-rom.bin: $(obj)/rom.bin
-
-$(obj)/rom.sw: $(obj)/rom.bin
- $(MKLASATIMG) -o $@ -k $^ -m $(MKLASATIMG_ARCH)
-
-$(obj)/rom.bin: $(obj)/rom
- $(OBJCOPY) -O binary -S $^ $@
-
-# Rule to make the bootloader
-$(obj)/rom: $(addprefix $(obj)/,$(OBJECTS))
- $(LD) $(KBUILD_LDFLAGS) $(LDSCRIPT) -o $@ $^
-
-$(obj)/%.o: $(obj)/%.gz
- $(LD) -r -o $@ -b binary $<
-
-$(obj)/%.gz: $(obj)/%.bin
- gzip -cf -9 $< > $@
-
-$(obj)/kImage.bin: $(KERNEL_IMAGE)
- $(OBJCOPY) -O binary -S $^ $@
-
-clean:
- rm -f rom rom.bin rom.sw kImage.bin kImage.o
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
deleted file mode 100644
index 1a27312d4c2e..000000000000
--- a/arch/mips/lasat/image/head.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/lasat/head.h>
-
- .text
- .section .text..start, "ax"
- .set noreorder
- .set mips3
-
- /* Magic words identifying a software image */
- .word LASAT_K_MAGIC0_VAL
- .word LASAT_K_MAGIC1_VAL
-
- /* Image header version */
- .word 0x00000002
-
- /* image start and size */
- .word _image_start
- .word _image_size
-
- /* start of kernel and entrypoint in uncompressed image */
- .word _kernel_start
- .word _kernel_entry
-
- /* Here we have room for future flags */
-
- .org 0x40
-reldate:
- .word TIMESTAMP
-
- .org 0x50
-release:
- .string VERSION
diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal
deleted file mode 100644
index 0864c963e188..000000000000
--- a/arch/mips/lasat/image/romscript.normal
+++ /dev/null
@@ -1,23 +0,0 @@
-OUTPUT_ARCH(mips)
-
-SECTIONS
-{
- .text :
- {
- *(.text..start)
- }
-
- /* Data in ROM */
-
- .data ALIGN(0x10) :
- {
- *(.data)
- }
- _image_start = ADDR(.data);
- _image_size = SIZEOF(.data);
-
- .other :
- {
- *(.*)
- }
-}
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
deleted file mode 100644
index 7965bbd0d319..000000000000
--- a/arch/mips/lasat/interrupt.c
+++ /dev/null
@@ -1,119 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * Routines for generic manipulation of the interrupts found on the
- * Lasat boards.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/lasatint.h>
-
-#include <irq.h>
-
-static volatile int *lasat_int_status;
-static volatile int *lasat_int_mask;
-static volatile int lasat_int_mask_shift;
-
-void disable_lasat_irq(struct irq_data *d)
-{
- unsigned int irq_nr = d->irq - LASAT_IRQ_BASE;
-
- *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
-}
-
-void enable_lasat_irq(struct irq_data *d)
-{
- unsigned int irq_nr = d->irq - LASAT_IRQ_BASE;
-
- *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
-}
-
-static struct irq_chip lasat_irq_type = {
- .name = "Lasat",
- .irq_mask = disable_lasat_irq,
- .irq_unmask = enable_lasat_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
- int b = 31, s;
-
- s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
- s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s;
- s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s;
- s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s;
- s = 1; if (x << 1 == 0) s = 0; b -= s;
-
- return b;
-}
-
-static unsigned long (*get_int_status)(void);
-
-static unsigned long get_int_status_100(void)
-{
- return *lasat_int_status & *lasat_int_mask;
-}
-
-static unsigned long get_int_status_200(void)
-{
- unsigned long int_status;
-
- int_status = *lasat_int_status;
- int_status &= (int_status >> LASATINT_MASK_SHIFT_200) & 0xffff;
- return int_status;
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long int_status;
- unsigned int cause = read_c0_cause();
- int irq;
-
- if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */
- do_IRQ(7);
- return;
- }
-
- int_status = get_int_status();
-
- /* if int_status == 0, then the interrupt has already been cleared */
- if (int_status) {
- irq = LASAT_IRQ_BASE + ls1bit32(int_status);
-
- do_IRQ(irq);
- }
-}
-
-void __init arch_init_irq(void)
-{
- int irq = LASAT_CASCADE_IRQ;
- int i;
-
- if (IS_LASAT_200()) {
- lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
- lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
- lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
- get_int_status = get_int_status_200;
- *lasat_int_mask &= 0xffff;
- } else {
- lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
- lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
- lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
- get_int_status = get_int_status_100;
- *lasat_int_mask = 0;
- }
-
- mips_cpu_irq_init();
-
- for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
- irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
-
- if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", irq);
-}
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
deleted file mode 100644
index 80e1ba541148..000000000000
--- a/arch/mips/lasat/lasat_board.c
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Routines specific to the LASAT boards
- */
-#include <linux/types.h>
-#include <linux/crc32.h>
-#include <asm/lasat/lasat.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/mutex.h>
-#include <asm/addrspace.h>
-#include "at93c.h"
-/* New model description table */
-#include "lasat_models.h"
-
-static DEFINE_MUTEX(lasat_eeprom_mutex);
-
-#define EEPROM_CRC(data, len) (~crc32(~0, data, len))
-
-struct lasat_info lasat_board_info;
-
-int EEPROMRead(unsigned int pos, unsigned char *data, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- *data++ = at93c_read(pos++);
-
- return 0;
-}
-
-int EEPROMWrite(unsigned int pos, unsigned char *data, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- at93c_write(pos++, *data++);
-
- return 0;
-}
-
-static void init_flash_sizes(void)
-{
- unsigned long *lb = lasat_board_info.li_flashpart_base;
- unsigned long *ls = lasat_board_info.li_flashpart_size;
- int i;
-
- ls[LASAT_MTD_BOOTLOADER] = 0x40000;
- ls[LASAT_MTD_SERVICE] = 0xC0000;
- ls[LASAT_MTD_NORMAL] = 0x100000;
-
- if (!IS_LASAT_200()) {
- lasat_board_info.li_flash_base = 0x1e000000;
-
- lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
-
- if (lasat_board_info.li_flash_size > 0x200000) {
- ls[LASAT_MTD_CONFIG] = 0x100000;
- ls[LASAT_MTD_FS] = 0x500000;
- }
- } else {
- lasat_board_info.li_flash_base = 0x10000000;
-
- if (lasat_board_info.li_flash_size < 0x1000000) {
- lb[LASAT_MTD_BOOTLOADER] = 0x10000000;
- ls[LASAT_MTD_CONFIG] = 0x100000;
- if (lasat_board_info.li_flash_size >= 0x400000)
- ls[LASAT_MTD_FS] =
- lasat_board_info.li_flash_size - 0x300000;
- }
- }
-
- for (i = 1; i < LASAT_MTD_LAST; i++)
- lb[i] = lb[i-1] + ls[i-1];
-}
-
-int lasat_init_board_info(void)
-{
- int c;
- unsigned long crc;
- unsigned long cfg0, cfg1;
- const struct product_info *ppi;
- int i_n_base_models = N_BASE_MODELS;
- const char * const * i_txt_base_models = txt_base_models;
- int i_n_prids = N_PRIDS;
-
- memset(&lasat_board_info, 0, sizeof(lasat_board_info));
-
- /* First read the EEPROM info */
- EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
- sizeof(struct lasat_eeprom_struct));
-
- /* Check the CRC */
- crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
- sizeof(struct lasat_eeprom_struct) - 4);
-
- if (crc != lasat_board_info.li_eeprom_info.crc32) {
- printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does "
- "not match calculated, attempting to soldier on...\n");
- }
-
- if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) {
- printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version "
- "%d, wanted version %d, attempting to soldier on...\n",
- (unsigned int)lasat_board_info.li_eeprom_info.version,
- LASAT_EEPROM_VERSION);
- }
-
- cfg0 = lasat_board_info.li_eeprom_info.cfg[0];
- cfg1 = lasat_board_info.li_eeprom_info.cfg[1];
-
- if (LASAT_W0_DSCTYPE(cfg0) != 1) {
- printk(KERN_WARNING "WARNING...\nWARNING...\n"
- "Invalid configuration read from EEPROM, attempting to "
- "soldier on...");
- }
- /* We have a valid configuration */
-
- switch (LASAT_W0_SDRAMBANKSZ(cfg0)) {
- case 0:
- lasat_board_info.li_memsize = 0x0800000;
- break;
- case 1:
- lasat_board_info.li_memsize = 0x1000000;
- break;
- case 2:
- lasat_board_info.li_memsize = 0x2000000;
- break;
- case 3:
- lasat_board_info.li_memsize = 0x4000000;
- break;
- case 4:
- lasat_board_info.li_memsize = 0x8000000;
- break;
- default:
- lasat_board_info.li_memsize = 0;
- }
-
- switch (LASAT_W0_SDRAMBANKS(cfg0)) {
- case 0:
- break;
- case 1:
- lasat_board_info.li_memsize *= 2;
- break;
- default:
- break;
- }
-
- switch (LASAT_W0_BUSSPEED(cfg0)) {
- case 0x0:
- lasat_board_info.li_bus_hz = 60000000;
- break;
- case 0x1:
- lasat_board_info.li_bus_hz = 66000000;
- break;
- case 0x2:
- lasat_board_info.li_bus_hz = 66666667;
- break;
- case 0x3:
- lasat_board_info.li_bus_hz = 80000000;
- break;
- case 0x4:
- lasat_board_info.li_bus_hz = 83333333;
- break;
- case 0x5:
- lasat_board_info.li_bus_hz = 100000000;
- break;
- }
-
- switch (LASAT_W0_CPUCLK(cfg0)) {
- case 0x0:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz;
- break;
- case 0x1:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- (lasat_board_info.li_bus_hz >> 1);
- break;
- case 0x2:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz;
- break;
- case 0x3:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz +
- (lasat_board_info.li_bus_hz >> 1);
- break;
- case 0x4:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz;
- break;
- }
-
- /* Flash size */
- switch (LASAT_W1_FLASHSIZE(cfg1)) {
- case 0:
- lasat_board_info.li_flash_size = 0x200000;
- break;
- case 1:
- lasat_board_info.li_flash_size = 0x400000;
- break;
- case 2:
- lasat_board_info.li_flash_size = 0x800000;
- break;
- case 3:
- lasat_board_info.li_flash_size = 0x1000000;
- break;
- case 4:
- lasat_board_info.li_flash_size = 0x2000000;
- break;
- }
-
- init_flash_sizes();
-
- lasat_board_info.li_bmid = LASAT_W0_BMID(cfg0);
- lasat_board_info.li_prid = lasat_board_info.li_eeprom_info.prid;
- if (lasat_board_info.li_prid == 0xffff || lasat_board_info.li_prid == 0)
- lasat_board_info.li_prid = lasat_board_info.li_bmid;
-
- /* Base model stuff */
- if (lasat_board_info.li_bmid > i_n_base_models)
- lasat_board_info.li_bmid = i_n_base_models;
- strcpy(lasat_board_info.li_bmstr,
- i_txt_base_models[lasat_board_info.li_bmid]);
-
- /* Product ID dependent values */
- c = lasat_board_info.li_prid;
- if (c >= i_n_prids) {
- strcpy(lasat_board_info.li_namestr, "Unknown Model");
- strcpy(lasat_board_info.li_typestr, "Unknown Type");
- } else {
- ppi = &vendor_info_table[0].vi_product_info[c];
- strcpy(lasat_board_info.li_namestr, ppi->pi_name);
- if (ppi->pi_type)
- strcpy(lasat_board_info.li_typestr, ppi->pi_type);
- else
- sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
- }
-
- return 0;
-}
-
-void lasat_write_eeprom_info(void)
-{
- unsigned long crc;
-
- mutex_lock(&lasat_eeprom_mutex);
-
- /* Generate the CRC */
- crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
- sizeof(struct lasat_eeprom_struct) - 4);
- lasat_board_info.li_eeprom_info.crc32 = crc;
-
- /* Write the EEPROM info */
- EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
- sizeof(struct lasat_eeprom_struct));
-
- mutex_unlock(&lasat_eeprom_mutex);
-}
diff --git a/arch/mips/lasat/lasat_models.h b/arch/mips/lasat/lasat_models.h
deleted file mode 100644
index 474e57342484..000000000000
--- a/arch/mips/lasat/lasat_models.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Model description tables
- */
-#include <linux/kernel.h>
-
-struct product_info {
- const char *pi_name;
- const char *pi_type;
-};
-
-struct vendor_info {
- const char *vi_name;
- const struct product_info *vi_product_info;
-};
-
-/*
- * Base models
- */
-static const char * const txt_base_models[] = {
- "MQ 2", "MQ Pro", "SP 25", "SP 50", "SP 100", "SP 5000", "SP 7000",
- "SP 1000", "Unknown"
-};
-#define N_BASE_MODELS (ARRAY_SIZE(txt_base_models) - 1)
-
-/*
- * Eicon Networks
- */
-static const char txt_en_mq[] = "Masquerade";
-static const char txt_en_sp[] = "Safepipe";
-
-static const struct product_info product_info_eicon[] = {
- { txt_en_mq, "II" }, /* 0 */
- { txt_en_mq, "Pro" }, /* 1 */
- { txt_en_sp, "25" }, /* 2 */
- { txt_en_sp, "50" }, /* 3 */
- { txt_en_sp, "100" }, /* 4 */
- { txt_en_sp, "5000" }, /* 5 */
- { txt_en_sp, "7000" }, /* 6 */
- { txt_en_sp, "30" }, /* 7 */
- { txt_en_sp, "5100" }, /* 8 */
- { txt_en_sp, "7100" }, /* 9 */
- { txt_en_sp, "1110" }, /* 10 */
- { txt_en_sp, "3020" }, /* 11 */
- { txt_en_sp, "3030" }, /* 12 */
- { txt_en_sp, "5020" }, /* 13 */
- { txt_en_sp, "5030" }, /* 14 */
- { txt_en_sp, "1120" }, /* 15 */
- { txt_en_sp, "1130" }, /* 16 */
- { txt_en_sp, "6010" }, /* 17 */
- { txt_en_sp, "6110" }, /* 18 */
- { txt_en_sp, "6210" }, /* 19 */
- { txt_en_sp, "1020" }, /* 20 */
- { txt_en_sp, "1040" }, /* 21 */
- { txt_en_sp, "1050" }, /* 22 */
- { txt_en_sp, "1060" }, /* 23 */
-};
-
-#define N_PRIDS ARRAY_SIZE(product_info_eicon)
-
-/*
- * The vendor table
- */
-static struct vendor_info const vendor_info_table[] = {
- { "Eicon Networks", product_info_eicon },
-};
-
-#define N_VENDORS ARRAY_SIZE(vendor_info_table)
diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c
deleted file mode 100644
index 08298ccf5ccf..000000000000
--- a/arch/mips/lasat/picvue.c
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include "picvue.h"
-
-#define PVC_BUSY 0x80
-#define PVC_NLINES 2
-#define PVC_DISPMEM 80
-#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES
-
-struct pvc_defs *picvue;
-
-static void pvc_reg_write(u32 val)
-{
- *picvue->reg = val;
-}
-
-static u32 pvc_reg_read(void)
-{
- u32 tmp = *picvue->reg;
- return tmp;
-}
-
-static void pvc_write_byte(u32 data, u8 byte)
-{
- data |= picvue->e;
- pvc_reg_write(data);
- data &= ~picvue->data_mask;
- data |= byte << picvue->data_shift;
- pvc_reg_write(data);
- ndelay(220);
- pvc_reg_write(data & ~picvue->e);
- ndelay(220);
-}
-
-static u8 pvc_read_byte(u32 data)
-{
- u8 byte;
-
- data |= picvue->e;
- pvc_reg_write(data);
- ndelay(220);
- byte = (pvc_reg_read() & picvue->data_mask) >> picvue->data_shift;
- data &= ~picvue->e;
- pvc_reg_write(data);
- ndelay(220);
- return byte;
-}
-
-static u8 pvc_read_data(void)
-{
- u32 data = pvc_reg_read();
- u8 byte;
- data |= picvue->rw;
- data &= ~picvue->rs;
- pvc_reg_write(data);
- ndelay(40);
- byte = pvc_read_byte(data);
- data |= picvue->rs;
- pvc_reg_write(data);
- return byte;
-}
-
-#define TIMEOUT 1000
-static int pvc_wait(void)
-{
- int i = TIMEOUT;
- int err = 0;
-
- while ((pvc_read_data() & PVC_BUSY) && i)
- i--;
- if (i == 0)
- err = -ETIME;
-
- return err;
-}
-
-#define MODE_INST 0
-#define MODE_DATA 1
-static void pvc_write(u8 byte, int mode)
-{
- u32 data = pvc_reg_read();
- data &= ~picvue->rw;
- if (mode == MODE_DATA)
- data |= picvue->rs;
- else
- data &= ~picvue->rs;
- pvc_reg_write(data);
- ndelay(40);
- pvc_write_byte(data, byte);
- if (mode == MODE_DATA)
- data &= ~picvue->rs;
- else
- data |= picvue->rs;
- pvc_reg_write(data);
- pvc_wait();
-}
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line)
-{
- int i = 0;
-
- if (line > 0 && (PVC_NLINES > 1))
- addr += 0x40 * line;
- pvc_write(0x80 | addr, MODE_INST);
-
- while (*str != 0 && i < PVC_LINELEN) {
- pvc_write(*str++, MODE_DATA);
- i++;
- }
-}
-
-void pvc_write_string_centered(const unsigned char *str, int line)
-{
- int len = strlen(str);
- u8 addr;
-
- if (len > PVC_VISIBLE_CHARS)
- addr = 0;
- else
- addr = (PVC_VISIBLE_CHARS - strlen(str))/2;
-
- pvc_write_string(str, addr, line);
-}
-
-void pvc_dump_string(const unsigned char *str)
-{
- int len = strlen(str);
-
- pvc_write_string(str, 0, 0);
- if (len > PVC_VISIBLE_CHARS)
- pvc_write_string(&str[PVC_VISIBLE_CHARS], 0, 1);
-}
-
-#define BM_SIZE 8
-#define MAX_PROGRAMMABLE_CHARS 8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE])
-{
- int i;
- int addr;
-
- if (charnum > MAX_PROGRAMMABLE_CHARS)
- return -ENOENT;
-
- addr = charnum * 8;
- pvc_write(0x40 | addr, MODE_INST);
-
- for (i = 0; i < BM_SIZE; i++)
- pvc_write(bitmap[i], MODE_DATA);
- return 0;
-}
-
-#define FUNC_SET_CMD 0x20
-#define EIGHT_BYTE (1 << 4)
-#define FOUR_BYTE 0
-#define TWO_LINES (1 << 3)
-#define ONE_LINE 0
-#define LARGE_FONT (1 << 2)
-#define SMALL_FONT 0
-
-static void pvc_funcset(u8 cmd)
-{
- pvc_write(FUNC_SET_CMD | (cmd & (EIGHT_BYTE|TWO_LINES|LARGE_FONT)),
- MODE_INST);
-}
-
-#define ENTRYMODE_CMD 0x4
-#define AUTO_INC (1 << 1)
-#define AUTO_DEC 0
-#define CURSOR_FOLLOWS_DISP (1 << 0)
-
-static void pvc_entrymode(u8 cmd)
-{
- pvc_write(ENTRYMODE_CMD | (cmd & (AUTO_INC|CURSOR_FOLLOWS_DISP)),
- MODE_INST);
-}
-
-#define DISP_CNT_CMD 0x08
-#define DISP_OFF 0
-#define DISP_ON (1 << 2)
-#define CUR_ON (1 << 1)
-#define CUR_BLINK (1 << 0)
-void pvc_dispcnt(u8 cmd)
-{
- pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST);
-}
-
-#define MOVE_CMD 0x10
-#define DISPLAY (1 << 3)
-#define CURSOR 0
-#define RIGHT (1 << 2)
-#define LEFT 0
-void pvc_move(u8 cmd)
-{
- pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST);
-}
-
-#define CLEAR_CMD 0x1
-void pvc_clear(void)
-{
- pvc_write(CLEAR_CMD, MODE_INST);
-}
-
-#define HOME_CMD 0x2
-void pvc_home(void)
-{
- pvc_write(HOME_CMD, MODE_INST);
-}
-
-int pvc_init(void)
-{
- u8 cmd = EIGHT_BYTE;
-
- if (PVC_NLINES == 2)
- cmd |= (SMALL_FONT|TWO_LINES);
- else
- cmd |= (LARGE_FONT|ONE_LINE);
- pvc_funcset(cmd);
- pvc_dispcnt(DISP_ON);
- pvc_entrymode(AUTO_INC);
-
- pvc_clear();
- pvc_write_string_centered("Display", 0);
- pvc_write_string_centered("Initialized", 1);
-
- return 0;
-}
-
-module_init(pvc_init);
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h
deleted file mode 100644
index 161d3bf50811..000000000000
--- a/arch/mips/lasat/picvue.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-struct pvc_defs {
- volatile u32 *reg;
- u32 data_shift;
- u32 data_mask;
- u32 e;
- u32 rw;
- u32 rs;
-};
-
-extern struct pvc_defs *picvue;
-
-#define PVC_NLINES 2
-#define PVC_DISPMEM 80
-#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES
-#define PVC_VISIBLE_CHARS 16
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line);
-void pvc_write_string_centered(const unsigned char *str, int line);
-void pvc_dump_string(const unsigned char *str);
-
-#define BM_SIZE 8
-#define MAX_PROGRAMMABLE_CHARS 8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]);
-
-void pvc_dispcnt(u8 cmd);
-#define DISP_OFF 0
-#define DISP_ON (1 << 2)
-#define CUR_ON (1 << 1)
-#define CUR_BLINK (1 << 0)
-
-void pvc_move(u8 cmd);
-#define DISPLAY (1 << 3)
-#define CURSOR 0
-#define RIGHT (1 << 2)
-#define LEFT 0
-
-void pvc_clear(void);
-void pvc_home(void);
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
deleted file mode 100644
index 61c033494af5..000000000000
--- a/arch/mips/lasat/picvue_proc.c
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/bug.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-#include <linux/timer.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-
-#include "picvue.h"
-
-static DEFINE_MUTEX(pvc_mutex);
-static char pvc_lines[PVC_NLINES][PVC_LINELEN+1];
-static int pvc_linedata[PVC_NLINES];
-static char *pvc_linename[PVC_NLINES] = {"line1", "line2"};
-#define DISPLAY_DIR_NAME "display"
-static int scroll_dir, scroll_interval;
-
-static struct timer_list timer;
-
-static void pvc_display(unsigned long data)
-{
- int i;
-
- pvc_clear();
- for (i = 0; i < PVC_NLINES; i++)
- pvc_write_string(pvc_lines[i], 0, i);
-}
-
-static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0);
-
-static int pvc_line_proc_show(struct seq_file *m, void *v)
-{
- int lineno = *(int *)m->private;
-
- if (lineno < 0 || lineno >= PVC_NLINES) {
- printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno);
- return 0;
- }
-
- mutex_lock(&pvc_mutex);
- seq_printf(m, "%s\n", pvc_lines[lineno]);
- mutex_unlock(&pvc_mutex);
-
- return 0;
-}
-
-static int pvc_line_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, pvc_line_proc_show, PDE_DATA(inode));
-}
-
-static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf,
- size_t count, loff_t *pos)
-{
- int lineno = *(int *)PDE_DATA(file_inode(file));
- char kbuf[PVC_LINELEN];
- size_t len;
-
- BUG_ON(lineno < 0 || lineno >= PVC_NLINES);
-
- len = min(count, sizeof(kbuf) - 1);
- if (copy_from_user(kbuf, buf, len))
- return -EFAULT;
- kbuf[len] = '\0';
-
- if (len > 0 && kbuf[len - 1] == '\n')
- len--;
-
- mutex_lock(&pvc_mutex);
- strncpy(pvc_lines[lineno], kbuf, len);
- pvc_lines[lineno][len] = '\0';
- mutex_unlock(&pvc_mutex);
-
- tasklet_schedule(&pvc_display_tasklet);
-
- return count;
-}
-
-static const struct proc_ops pvc_line_proc_ops = {
- .proc_open = pvc_line_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = pvc_line_proc_write,
-};
-
-static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf,
- size_t count, loff_t *pos)
-{
- char kbuf[42];
- size_t len;
- int cmd;
-
- len = min(count, sizeof(kbuf) - 1);
- if (copy_from_user(kbuf, buf, len))
- return -EFAULT;
- kbuf[len] = '\0';
-
- cmd = simple_strtol(kbuf, NULL, 10);
-
- mutex_lock(&pvc_mutex);
- if (scroll_interval != 0)
- del_timer(&timer);
-
- if (cmd == 0) {
- scroll_dir = 0;
- scroll_interval = 0;
- } else {
- if (cmd < 0) {
- scroll_dir = -1;
- scroll_interval = -cmd;
- } else {
- scroll_dir = 1;
- scroll_interval = cmd;
- }
- add_timer(&timer);
- }
- mutex_unlock(&pvc_mutex);
-
- return count;
-}
-
-static int pvc_scroll_proc_show(struct seq_file *m, void *v)
-{
- mutex_lock(&pvc_mutex);
- seq_printf(m, "%d\n", scroll_dir * scroll_interval);
- mutex_unlock(&pvc_mutex);
-
- return 0;
-}
-
-static int pvc_scroll_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, pvc_scroll_proc_show, NULL);
-}
-
-static const struct proc_ops pvc_scroll_proc_ops = {
- .proc_open = pvc_scroll_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = pvc_scroll_proc_write,
-};
-
-void pvc_proc_timerfunc(struct timer_list *unused)
-{
- if (scroll_dir < 0)
- pvc_move(DISPLAY|RIGHT);
- else if (scroll_dir > 0)
- pvc_move(DISPLAY|LEFT);
-
- timer.expires = jiffies + scroll_interval;
- add_timer(&timer);
-}
-
-static void pvc_proc_cleanup(void)
-{
- remove_proc_subtree(DISPLAY_DIR_NAME, NULL);
- del_timer_sync(&timer);
-}
-
-static int __init pvc_proc_init(void)
-{
- struct proc_dir_entry *dir, *proc_entry;
- int i;
-
- dir = proc_mkdir(DISPLAY_DIR_NAME, NULL);
- if (dir == NULL)
- goto error;
-
- for (i = 0; i < PVC_NLINES; i++) {
- strcpy(pvc_lines[i], "");
- pvc_linedata[i] = i;
- }
- for (i = 0; i < PVC_NLINES; i++) {
- proc_entry = proc_create_data(pvc_linename[i], 0644, dir,
- &pvc_line_proc_ops, &pvc_linedata[i]);
- if (proc_entry == NULL)
- goto error;
- }
- proc_entry = proc_create("scroll", 0644, dir, &pvc_scroll_proc_ops);
- if (proc_entry == NULL)
- goto error;
-
- timer_setup(&timer, pvc_proc_timerfunc, 0);
-
- return 0;
-error:
- pvc_proc_cleanup();
- return -ENOMEM;
-}
-
-module_init(pvc_proc_init);
-module_exit(pvc_proc_cleanup);
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
deleted file mode 100644
index 5ce1407de2d5..000000000000
--- a/arch/mips/lasat/prom.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PROM interface routines.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <asm/cpu.h>
-#include <asm/setup.h>
-
-#include "at93c.h"
-#include <asm/lasat/eeprom.h>
-#include "prom.h"
-
-#define RESET_VECTOR 0xbfc00000
-#define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n))
-#define PROM_DISPLAY_ADDR PROM_JUMP_TABLE_ENTRY(0)
-#define PROM_PUTC_ADDR PROM_JUMP_TABLE_ENTRY(1)
-#define PROM_MONITOR_ADDR PROM_JUMP_TABLE_ENTRY(2)
-
-static void null_prom_display(const char *string, int pos, int clear)
-{
-}
-
-static void null_prom_monitor(void)
-{
-}
-
-static void null_prom_putc(char c)
-{
-}
-
-/* these are functions provided by the bootloader */
-static void (*__prom_putc)(char c) = null_prom_putc;
-
-void prom_putchar(char c)
-{
- __prom_putc(c);
-}
-
-void (*prom_display)(const char *string, int pos, int clear) =
- null_prom_display;
-void (*prom_monitor)(void) = null_prom_monitor;
-
-unsigned int lasat_ndelay_divider;
-
-static void setup_prom_vectors(void)
-{
- u32 version = *(u32 *)(RESET_VECTOR + 0x90);
-
- if (version >= 307) {
- prom_display = (void *)PROM_DISPLAY_ADDR;
- __prom_putc = (void *)PROM_PUTC_ADDR;
- prom_monitor = (void *)PROM_MONITOR_ADDR;
- }
- printk(KERN_DEBUG "prom vectors set up\n");
-}
-
-static struct at93c_defs at93c_defs[N_MACHTYPES] = {
- {
- .reg = (void *)AT93C_REG_100,
- .rdata_reg = (void *)AT93C_RDATA_REG_100,
- .rdata_shift = AT93C_RDATA_SHIFT_100,
- .wdata_shift = AT93C_WDATA_SHIFT_100,
- .cs = AT93C_CS_M_100,
- .clk = AT93C_CLK_M_100
- }, {
- .reg = (void *)AT93C_REG_200,
- .rdata_reg = (void *)AT93C_RDATA_REG_200,
- .rdata_shift = AT93C_RDATA_SHIFT_200,
- .wdata_shift = AT93C_WDATA_SHIFT_200,
- .cs = AT93C_CS_M_200,
- .clk = AT93C_CLK_M_200
- },
-};
-
-void __init prom_init(void)
-{
- int argc = fw_arg0;
- char **argv = (char **) fw_arg1;
-
- setup_prom_vectors();
-
- if (IS_LASAT_200()) {
- printk(KERN_INFO "LASAT 200 board\n");
- lasat_ndelay_divider = LASAT_200_DIVIDER;
- at93c = &at93c_defs[1];
- } else {
- printk(KERN_INFO "LASAT 100 board\n");
- lasat_ndelay_divider = LASAT_100_DIVIDER;
- at93c = &at93c_defs[0];
- }
-
- lasat_init_board_info(); /* Read info from EEPROM */
-
- /* Get the command line */
- if (argc > 0) {
- strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1);
- arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0';
- }
-
- /* Set the I/O base address */
- set_io_port_base(KSEG1);
-
- /* Set memory regions */
- ioport_resource.start = 0;
- ioport_resource.end = 0xffffffff; /* Wrong, fixme. */
-
- add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
- return lasat_board_info.li_bmstr;
-}
diff --git a/arch/mips/lasat/prom.h b/arch/mips/lasat/prom.h
deleted file mode 100644
index 3d1df853e9d3..000000000000
--- a/arch/mips/lasat/prom.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PROM_H
-#define __PROM_H
-
-extern void (*prom_display)(const char *string, int pos, int clear);
-extern void (*prom_monitor)(void);
-
-#endif /* __PROM_H */
diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c
deleted file mode 100644
index 7c516ed9af15..000000000000
--- a/arch/mips/lasat/reset.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Reset the LASAT board.
- */
-#include <linux/kernel.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/lasat/lasat.h>
-
-#include "picvue.h"
-#include "prom.h"
-
-static void lasat_machine_restart(char *command);
-static void lasat_machine_halt(void);
-
-/* Used to set machine to boot in service mode via /proc interface */
-int lasat_boot_to_service;
-
-static void lasat_machine_restart(char *command)
-{
- local_irq_disable();
-
- if (lasat_boot_to_service) {
- *(volatile unsigned int *)0xa0000024 = 0xdeadbeef;
- *(volatile unsigned int *)0xa00000fc = 0xfedeabba;
- }
- *lasat_misc->reset_reg = 0xbedead;
- for (;;) ;
-}
-
-static void lasat_machine_halt(void)
-{
- local_irq_disable();
-
- prom_monitor();
- for (;;) ;
-}
-
-void lasat_reboot_setup(void)
-{
- _machine_restart = lasat_machine_restart;
- _machine_halt = lasat_machine_halt;
- pm_power_off = lasat_machine_halt;
-}
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
deleted file mode 100644
index 16b242713420..000000000000
--- a/arch/mips/lasat/serial.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Registration of Lasat UART platform device.
- *
- * Copyright (C) 2007 Brian Murphy <brian@murphy.dk>
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/serial.h>
-
-static struct resource lasat_serial_res[2] __initdata;
-
-static struct plat_serial8250_port lasat_serial8250_port[] = {
- {
- .iotype = UPIO_MEM,
- .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF |
- UPF_SKIP_TEST,
- },
- {},
-};
-
-static __init int lasat_uart_add(void)
-{
- struct platform_device *pdev;
- int retval;
-
- pdev = platform_device_alloc("serial8250", -1);
- if (!pdev)
- return -ENOMEM;
-
- if (!IS_LASAT_200()) {
- lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
- lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
- lasat_serial_res[0].flags = IORESOURCE_MEM;
- lasat_serial_res[1].start = LASATINT_UART_100;
- lasat_serial_res[1].end = LASATINT_UART_100;
- lasat_serial_res[1].flags = IORESOURCE_IRQ;
-
- lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_100;
- lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_100 * 16;
- lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_100;
- lasat_serial8250_port[0].irq = LASATINT_UART_100;
- } else {
- lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_200);
- lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_200 * 8 - 1;
- lasat_serial_res[0].flags = IORESOURCE_MEM;
- lasat_serial_res[1].start = LASATINT_UART_200;
- lasat_serial_res[1].end = LASATINT_UART_200;
- lasat_serial_res[1].flags = IORESOURCE_IRQ;
-
- lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_200;
- lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_200 * 16;
- lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_200;
- lasat_serial8250_port[0].irq = LASATINT_UART_200;
- }
-
- pdev->id = PLAT8250_DEV_PLATFORM;
- pdev->dev.platform_data = lasat_serial8250_port;
-
- retval = platform_device_add_resources(pdev, lasat_serial_res, ARRAY_SIZE(lasat_serial_res));
- if (retval)
- goto err_free_device;
-
- retval = platform_device_add(pdev);
- if (retval)
- goto err_free_device;
-
- return 0;
-
-err_free_device:
- platform_device_put(pdev);
-
- return retval;
-}
-device_initcall(lasat_uart_add);
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
deleted file mode 100644
index 0743243fd86d..000000000000
--- a/arch/mips/lasat/setup.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
- *
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Brian Murphy <brian@murphy.dk>
- *
- * Lasat specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/serial.h>
-
-#ifdef CONFIG_PICVUE
-#include <linux/notifier.h>
-#endif
-
-#include "ds1603.h"
-#include <asm/lasat/ds1603.h>
-#include <asm/lasat/picvue.h>
-#include <asm/lasat/eeprom.h>
-
-#include "prom.h"
-
-int lasat_command_line;
-void lasatint_init(void);
-
-extern void lasat_reboot_setup(void);
-extern void pcisetup(void);
-extern void edhac_init(void *, void *, void *);
-extern void addrflt_init(void);
-
-struct lasat_misc lasat_misc_info[N_MACHTYPES] = {
- {
- .reset_reg = (void *)KSEG1ADDR(0x1c840000),
- .flash_wp_reg = (void *)KSEG1ADDR(0x1c800000), 2
- }, {
- .reset_reg = (void *)KSEG1ADDR(0x11080000),
- .flash_wp_reg = (void *)KSEG1ADDR(0x11000000), 6
- }
-};
-
-struct lasat_misc *lasat_misc;
-
-#ifdef CONFIG_DS1603
-static struct ds_defs ds_defs[N_MACHTYPES] = {
- { (void *)DS1603_REG_100, (void *)DS1603_REG_100,
- DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100,
- DS1603_DATA_SHIFT_100, 0, 0 },
- { (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200,
- DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200,
- DS1603_DATA_READ_SHIFT_200, 1, 2000 }
-};
-#endif
-
-#ifdef CONFIG_PICVUE
-#include "picvue.h"
-static struct pvc_defs pvc_defs[N_MACHTYPES] = {
- { (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100,
- PVC_E_100, PVC_RW_100, PVC_RS_100 },
- { (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200,
- PVC_E_200, PVC_RW_200, PVC_RS_200 }
-};
-#endif
-
-static int lasat_panic_display(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
-#ifdef CONFIG_PICVUE
- unsigned char *string = ptr;
- if (string == NULL)
- string = "Kernel Panic";
- pvc_dump_string(string);
-#endif
- return NOTIFY_DONE;
-}
-
-static int lasat_panic_prom_monitor(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- prom_monitor();
- return NOTIFY_DONE;
-}
-
-static struct notifier_block lasat_panic_block[] =
-{
- {
- .notifier_call = lasat_panic_display,
- .priority = INT_MAX
- }, {
- .notifier_call = lasat_panic_prom_monitor,
- .priority = INT_MIN
- }
-};
-
-void __init plat_time_init(void)
-{
- mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
-
- change_c0_status(ST0_IM, IE_IRQ0);
-}
-
-void __init plat_mem_setup(void)
-{
- int i;
- int lasat_type = IS_LASAT_200() ? 1 : 0;
-
- lasat_misc = &lasat_misc_info[lasat_type];
-#ifdef CONFIG_PICVUE
- picvue = &pvc_defs[lasat_type];
-#endif
-
- /* Set up panic notifier */
- for (i = 0; i < ARRAY_SIZE(lasat_panic_block); i++)
- atomic_notifier_chain_register(&panic_notifier_list,
- &lasat_panic_block[i]);
-
- lasat_reboot_setup();
-
-#ifdef CONFIG_DS1603
- ds1603 = &ds_defs[lasat_type];
-#endif
-
-#ifdef DYNAMIC_SERIAL_INIT
- serial_init();
-#endif
-
- pr_info("Lasat specific initialization complete\n");
-}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
deleted file mode 100644
index e666fe26c50d..000000000000
--- a/arch/mips/lasat/sysctl.c
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Routines specific to the LASAT boards
- */
-#include <linux/types.h>
-#include <asm/lasat/lasat.h>
-
-#include <linux/sysctl.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/net.h>
-#include <linux/inet.h>
-#include <linux/uaccess.h>
-
-#include <asm/time.h>
-
-#ifdef CONFIG_DS1603
-#include "ds1603.h"
-#endif
-
-
-/* And the same for proc */
-int proc_dolasatstring(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- int r;
-
- r = proc_dostring(table, write, buffer, lenp, ppos);
- if ((!write) || r)
- return r;
-
- lasat_write_eeprom_info();
-
- return 0;
-}
-
-#ifdef CONFIG_DS1603
-static int rtctmp;
-
-/* proc function to read/write RealTime Clock */
-int proc_dolasatrtc(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- struct timespec64 ts;
- int r;
-
- if (!write) {
- read_persistent_clock64(&ts);
- rtctmp = ts.tv_sec;
- /* check for time < 0 and set to 0 */
- if (rtctmp < 0)
- rtctmp = 0;
- }
- r = proc_dointvec(table, write, buffer, lenp, ppos);
- if (r)
- return r;
-
- if (write) {
- /*
- * Due to the RTC hardware limitation, we can not actually
- * use the full 64-bit range here.
- */
- ts.tv_sec = rtctmp;
- ts.tv_nsec = 0;
-
- update_persistent_clock64(ts);
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_INET
-int proc_lasat_ip(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- unsigned int ip;
- char *p, c;
- int len;
- char ipbuf[32];
-
- if (!table->data || !table->maxlen || !*lenp ||
- (*ppos && !write)) {
- *lenp = 0;
- return 0;
- }
-
- if (write) {
- len = 0;
- p = buffer;
- while (len < *lenp) {
- if (get_user(c, p++))
- return -EFAULT;
- if (c == 0 || c == '\n')
- break;
- len++;
- }
- if (len >= sizeof(ipbuf)-1)
- len = sizeof(ipbuf) - 1;
- if (copy_from_user(ipbuf, buffer, len))
- return -EFAULT;
- ipbuf[len] = 0;
- *ppos += *lenp;
- /* Now see if we can convert it to a valid IP */
- ip = in_aton(ipbuf);
- *(unsigned int *)(table->data) = ip;
- lasat_write_eeprom_info();
- } else {
- ip = *(unsigned int *)(table->data);
- sprintf(ipbuf, "%d.%d.%d.%d",
- (ip) & 0xff,
- (ip >> 8) & 0xff,
- (ip >> 16) & 0xff,
- (ip >> 24) & 0xff);
- len = strlen(ipbuf);
- if (len > *lenp)
- len = *lenp;
- if (len)
- if (copy_to_user(buffer, ipbuf, len))
- return -EFAULT;
- if (len < *lenp) {
- if (put_user('\n', ((char *) buffer) + len))
- return -EFAULT;
- len++;
- }
- *lenp = len;
- *ppos += len;
- }
-
- return 0;
-}
-#endif
-
-int proc_lasat_prid(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- int r;
-
- r = proc_dointvec(table, write, buffer, lenp, ppos);
- if (r < 0)
- return r;
- if (write) {
- lasat_board_info.li_eeprom_info.prid =
- lasat_board_info.li_prid;
- lasat_write_eeprom_info();
- lasat_init_board_info();
- }
- return 0;
-}
-
-extern int lasat_boot_to_service;
-
-static struct ctl_table lasat_table[] = {
- {
- .procname = "cpu-hz",
- .data = &lasat_board_info.li_cpu_hz,
- .maxlen = sizeof(int),
- .mode = 0444,
- .proc_handler = proc_dointvec,
- },
- {
- .procname = "bus-hz",
- .data = &lasat_board_info.li_bus_hz,
- .maxlen = sizeof(int),
- .mode = 0444,
- .proc_handler = proc_dointvec,
- },
- {
- .procname = "bmid",
- .data = &lasat_board_info.li_bmid,
- .maxlen = sizeof(int),
- .mode = 0444,
- .proc_handler = proc_dointvec,
- },
- {
- .procname = "prid",
- .data = &lasat_board_info.li_prid,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_lasat_prid,
- },
-#ifdef CONFIG_INET
- {
- .procname = "ipaddr",
- .data = &lasat_board_info.li_eeprom_info.ipaddr,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_lasat_ip,
- },
- {
- .procname = "netmask",
- .data = &lasat_board_info.li_eeprom_info.netmask,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_lasat_ip,
- },
-#endif
- {
- .procname = "passwd_hash",
- .data = &lasat_board_info.li_eeprom_info.passwd_hash,
- .maxlen =
- sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
- .mode = 0600,
- .proc_handler = proc_dolasatstring,
- },
- {
- .procname = "boot-service",
- .data = &lasat_boot_to_service,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec,
- },
-#ifdef CONFIG_DS1603
- {
- .procname = "rtc",
- .data = &rtctmp,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dolasatrtc,
- },
-#endif
- {
- .procname = "namestr",
- .data = &lasat_board_info.li_namestr,
- .maxlen = sizeof(lasat_board_info.li_namestr),
- .mode = 0444,
- .proc_handler = proc_dostring,
- },
- {
- .procname = "typestr",
- .data = &lasat_board_info.li_typestr,
- .maxlen = sizeof(lasat_board_info.li_typestr),
- .mode = 0444,
- .proc_handler = proc_dostring,
- },
- {}
-};
-
-static struct ctl_table lasat_root_table[] = {
- {
- .procname = "lasat",
- .mode = 0555,
- .child = lasat_table
- },
- {}
-};
-
-static int __init lasat_register_sysctl(void)
-{
- struct ctl_table_header *lasat_table_header;
-
- lasat_table_header =
- register_sysctl_table(lasat_root_table);
- if (!lasat_table_header) {
- printk(KERN_ERR "Unable to register LASAT sysctl\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-arch_initcall(lasat_register_sysctl);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 342ce10ef593..c6142b289086 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
-obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
@@ -31,7 +30,6 @@ obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
# These are still pretty much in the old state, watch, go blind.
#
obj-$(CONFIG_ATH79) += fixup-ath79.o
-obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
deleted file mode 100644
index b00658d19116..000000000000
--- a/arch/mips/pci/ops-nile4.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/bootinfo.h>
-
-#include <asm/lasat/lasat.h>
-#include <asm/nile4.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#define LO(reg) (reg / 4)
-#define HI(reg) (reg / 4 + 1)
-
-volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-
-static int nile4_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 *val)
-{
- unsigned char busnum = bus->number;
- u32 adr, mask, err;
-
- if ((busnum == 0) && (PCI_SLOT(devfn) > 8))
- /* The addressing scheme chosen leaves room for just
- * 8 devices on the first busnum (besides the PCI
- * controller itself) */
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if ((busnum == 0) && (devfn == PCI_DEVFN(0, 0))) {
- /* Access controller registers directly */
- if (access_type == PCI_ACCESS_WRITE) {
- vrc_pciregs[(0x200 + where) >> 2] = *val;
- } else {
- *val = vrc_pciregs[(0x200 + where) >> 2];
- }
- return PCIBIOS_SUCCESSFUL;
- }
-
- /* Temporarily map PCI Window 1 to config space */
- mask = vrc_pciregs[LO(NILE4_PCIINIT1)];
- vrc_pciregs[LO(NILE4_PCIINIT1)] = 0x0000001a | (busnum ? 0x200 : 0);
-
- /* Clear PCI Error register. This also clears the Error Type
- * bits in the Control register */
- vrc_pciregs[LO(NILE4_PCIERR)] = 0;
- vrc_pciregs[HI(NILE4_PCIERR)] = 0;
-
- /* Setup address */
- if (busnum == 0)
- adr =
- KSEG1ADDR(PCI_WINDOW1) +
- ((1 << (PCI_SLOT(devfn) + 15)) | (PCI_FUNC(devfn) << 8)
- | (where & ~3));
- else
- adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) |
- (where & ~3);
-
- if (access_type == PCI_ACCESS_WRITE)
- *(u32 *) adr = *val;
- else
- *val = *(u32 *) adr;
-
- /* Check for master or target abort */
- err = (vrc_pciregs[HI(NILE4_PCICTRL)] >> 5) & 0x7;
-
- /* Restore PCI Window 1 */
- vrc_pciregs[LO(NILE4_PCIINIT1)] = mask;
-
- if (err)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data = 0;
- int err;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data);
- if (err)
- return err;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
- int err;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data);
- if (err)
- return err;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else
- data = val;
-
- if (nile4_pcibios_config_access
- (PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops nile4_pci_ops = {
- .read = nile4_pcibios_read,
- .write = nile4_pcibios_write,
-};
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
deleted file mode 100644
index 47f4ee6bbb3b..000000000000
--- a/arch/mips/pci/pci-lasat.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000, 2001, 04 Keith M Wesolowski
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-
-#include <asm/lasat/lasat.h>
-
-#include <irq.h>
-
-extern struct pci_ops nile4_pci_ops;
-extern struct pci_ops gt64xxx_pci0_ops;
-static struct resource lasat_pci_mem_resource = {
- .name = "LASAT PCI MEM",
- .start = 0x18000000,
- .end = 0x19ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource lasat_pci_io_resource = {
- .name = "LASAT PCI IO",
- .start = 0x1a000000,
- .end = 0x1bffffff,
- .flags = IORESOURCE_IO,
-};
-
-static struct pci_controller lasat_pci_controller = {
- .mem_resource = &lasat_pci_mem_resource,
- .io_resource = &lasat_pci_io_resource,
-};
-
-static int __init lasat_pci_setup(void)
-{
- printk(KERN_DEBUG "PCI: starting\n");
-
- if (IS_LASAT_200())
- lasat_pci_controller.pci_ops = &nile4_pci_ops;
- else
- lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
-
- register_pci_controller(&lasat_pci_controller);
-
- return 0;
-}
-
-arch_initcall(lasat_pci_setup);
-
-#define LASAT_IRQ_ETH1 (LASAT_IRQ_BASE + 0)
-#define LASAT_IRQ_ETH0 (LASAT_IRQ_BASE + 1)
-#define LASAT_IRQ_HDC (LASAT_IRQ_BASE + 2)
-#define LASAT_IRQ_COMP (LASAT_IRQ_BASE + 3)
-#define LASAT_IRQ_HDLC (LASAT_IRQ_BASE + 4)
-#define LASAT_IRQ_PCIA (LASAT_IRQ_BASE + 5)
-#define LASAT_IRQ_PCIB (LASAT_IRQ_BASE + 6)
-#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7)
-#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8)
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- switch (slot) {
- case 1:
- case 2:
- case 3:
- return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4);
- case 4:
- return LASAT_IRQ_ETH1; /* Ethernet 1 (LAN 2) */
- case 5:
- return LASAT_IRQ_ETH0; /* Ethernet 0 (LAN 1) */
- case 6:
- return LASAT_IRQ_HDC; /* IDE controller */
- default:
- return 0xff; /* Illegal */
- }
-
- return -1;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}