summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt300
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml354
-rw-r--r--Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt24
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/pwrap.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml190
-rw-r--r--arch/arm/Kconfig.debug42
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/configs/omap2plus_defconfig2
-rw-r--r--arch/arm/include/debug/stm32.S9
-rw-r--r--arch/arm/mach-at91/Kconfig1
-rw-r--r--arch/arm/mach-at91/pm.c35
-rw-r--r--arch/arm/mach-at91/pm.h2
-rw-r--r--arch/arm/mach-at91/pm_data-offsets.c4
-rw-r--r--arch/arm/mach-at91/pm_suspend.S189
-rw-r--r--arch/arm/mach-bcm/Kconfig8
-rw-r--r--arch/arm/mach-cns3xxx/core.c10
-rw-r--r--arch/arm/mach-dove/common.c2
-rw-r--r--arch/arm/mach-ep93xx/timer-ep93xx.c14
-rw-r--r--arch/arm/mach-imx/Kconfig10
-rw-r--r--arch/arm/mach-imx/anatop.c7
-rw-r--r--arch/arm/mach-imx/gpc.c4
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c13
-rw-r--r--arch/arm/mach-imx/mach-imx6sl.c1
-rw-r--r--arch/arm/mach-imx/mach-imx6ul.c1
-rw-r--r--arch/arm/mach-imx/platsmp.c1
-rw-r--r--arch/arm/mach-imx/pm-imx6.c2
-rw-r--r--arch/arm/mach-imx/pm-imx7ulp.c1
-rw-r--r--arch/arm/mach-imx/src.c3
-rw-r--r--arch/arm/mach-iop32x/time.c12
-rw-r--r--arch/arm/mach-mmp/time.c11
-rw-r--r--arch/arm/mach-omap1/pm.c13
-rw-r--r--arch/arm/mach-omap1/time.c10
-rw-r--r--arch/arm/mach-omap1/timer32k.c10
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c19
-rw-r--r--arch/arm/mach-omap2/pm33xx-core.c137
-rw-r--r--arch/arm/mach-omap2/timer.c11
-rw-r--r--arch/arm/mach-orion5x/Kconfig2
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c3
-rw-r--r--arch/arm/mach-qcom/Kconfig5
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7779.c1
-rw-r--r--arch/arm/mach-shmobile/setup-rcar-gen2.c2
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c1
-rw-r--r--arch/arm/mach-spear/time.c9
-rw-r--r--arch/arm/mach-sunxi/sunxi.c2
-rw-r--r--arch/arm/mach-tegra/Makefile19
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra114.c89
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra20.c212
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra30.c132
-rw-r--r--arch/arm/mach-tegra/cpuidle.c50
-rw-r--r--arch/arm/mach-tegra/cpuidle.h21
-rw-r--r--arch/arm/mach-tegra/irq.c3
-rw-r--r--arch/arm/mach-tegra/pm.c54
-rw-r--r--arch/arm/mach-tegra/pm.h4
-rw-r--r--arch/arm/mach-tegra/reset-handler.S11
-rw-r--r--arch/arm/mach-tegra/reset.h9
-rw-r--r--arch/arm/mach-tegra/sleep-tegra20.S170
-rw-r--r--arch/arm/mach-tegra/sleep-tegra30.S6
-rw-r--r--arch/arm/mach-tegra/sleep.h15
-rw-r--r--arch/arm/mach-tegra/tegra.c7
-rw-r--r--arch/arm/mach-zynq/common.c2
-rw-r--r--arch/arm/plat-orion/time.c10
-rw-r--r--arch/arm64/Kconfig.platforms2
-rw-r--r--drivers/clk/at91/clk-sam9x60-pll.c91
-rw-r--r--drivers/cpuidle/Kconfig.arm8
-rw-r--r--drivers/cpuidle/Makefile1
-rw-r--r--drivers/cpuidle/cpuidle-tegra.c392
-rw-r--r--drivers/firmware/xilinx/Kconfig2
-rw-r--r--drivers/soc/mediatek/mtk-cmdq-helper.c1
-rw-r--r--drivers/soc/mediatek/mtk-pmic-wrap.c128
-rw-r--r--drivers/soc/renesas/Kconfig2
-rw-r--r--drivers/soc/tegra/pmc.c688
-rw-r--r--drivers/soc/ti/pm33xx.c21
-rw-r--r--include/dt-bindings/clock/tegra114-car.h4
-rw-r--r--include/dt-bindings/clock/tegra124-car-common.h4
-rw-r--r--include/dt-bindings/clock/tegra210-car.h4
-rw-r--r--include/dt-bindings/clock/tegra30-car.h4
-rw-r--r--include/dt-bindings/soc/tegra-pmc.h16
-rw-r--r--include/linux/clk/at91_pmc.h23
-rw-r--r--include/linux/firmware/xlnx-zynqmp.h2
-rw-r--r--include/linux/platform_data/pm33xx.h6
-rw-r--r--include/soc/tegra/cpuidle.h2
-rw-r--r--include/soc/tegra/irq.h (renamed from arch/arm/mach-tegra/irq.h)8
-rw-r--r--include/soc/tegra/pm.h31
-rw-r--r--include/soc/tegra/pmc.h3
85 files changed, 2290 insertions, 1448 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 470e003b7f8a..490ce99010b6 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -212,6 +212,8 @@ properties:
- rockchip,rk3066-smp
- socionext,milbeaut-m10v-smp
- ste,dbx500-smp
+ - ti,am3352
+ - ti,am4372
cpu-release-addr:
$ref: '/schemas/types.yaml#/definitions/uint64'
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
deleted file mode 100644
index cb12f33a247f..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ /dev/null
@@ -1,300 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-== Power Management Controller Node ==
-
-The PMC block interacts with an external Power Management Unit. The PMC
-mostly controls the entry and exit of the system from different sleep
-modes. It provides power-gating controllers for SoC and CPU power-islands.
-
-Required properties:
-- name : Should be pmc
-- compatible : Should contain one of the following:
- For Tegra20 must contain "nvidia,tegra20-pmc".
- For Tegra30 must contain "nvidia,tegra30-pmc".
- For Tegra114 must contain "nvidia,tegra114-pmc"
- For Tegra124 must contain "nvidia,tegra124-pmc"
- For Tegra132 must contain "nvidia,tegra124-pmc"
- For Tegra210 must contain "nvidia,tegra210-pmc"
-- reg : Offset and length of the register set for the device
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
- "pclk" (The Tegra clock of that name),
- "clk32k_in" (The 32KHz clock input to Tegra).
-
-Optional properties:
-- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
- The PMU is an external Power Management Unit, whose interrupt output
- signal is fed into the PMC. This signal is optionally inverted, and then
- fed into the ARM GIC. The PMC is not involved in the detection or
- handling of this interrupt signal, merely its inversion.
-- nvidia,suspend-mode : The suspend mode that the platform should use.
- Valid values are 0, 1 and 2:
- 0 (LP0): CPU + Core voltage off and DRAM in self-refresh
- 1 (LP1): CPU voltage off and DRAM in self-refresh
- 2 (LP2): CPU voltage off
-- nvidia,core-power-req-active-high : Boolean, core power request active-high
-- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
-- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
-- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
- is enabled.
-
-Required properties when nvidia,suspend-mode is specified:
-- nvidia,cpu-pwr-good-time : CPU power good time in uS.
-- nvidia,cpu-pwr-off-time : CPU power off time in uS.
-- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
- Core power good time in uS.
-- nvidia,core-pwr-off-time : Core power off time in uS.
-
-Required properties when nvidia,suspend-mode=<0>:
-- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
- The LP0 vector contains the warm boot code that is executed by AVP when
- resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
- processor and always being the first boot processor when chip is power on
- or resume from deep sleep mode. When the system is resumed from the deep
- sleep mode, the warm boot code will restore some PLLs, clocks and then
- bring up CPU0 for resuming the system.
-
-Hardware-triggered thermal reset:
-On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
-hardware-triggered thermal reset will be enabled.
-
-Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
- described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
- Tegra K1 Technical Reference Manual.
-- nvidia,bus-addr : Bus address of the PMU on the I2C bus
-- nvidia,reg-addr : I2C register address to write poweroff command to
-- nvidia,reg-data : Poweroff command to write to PMU
-
-Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
- Defaults to 0. Valid values are described in section 12.5.2
- "Pinmux Support" of the Tegra4 Technical Reference Manual.
-
-Optional nodes:
-- powergates : This node contains a hierarchy of power domain nodes, which
- should match the powergates on the Tegra SoC. See "Powergate
- Nodes" below.
-
-Example:
-
-/ SoC dts including file
-pmc@7000f400 {
- compatible = "nvidia,tegra20-pmc";
- reg = <0x7000e400 0x400>;
- clocks = <&tegra_car 110>, <&clk32k_in>;
- clock-names = "pclk", "clk32k_in";
- nvidia,invert-interrupt;
- nvidia,suspend-mode = <1>;
- nvidia,cpu-pwr-good-time = <2000>;
- nvidia,cpu-pwr-off-time = <100>;
- nvidia,core-pwr-good-time = <3845 3845>;
- nvidia,core-pwr-off-time = <458>;
- nvidia,core-power-req-active-high;
- nvidia,sys-clock-req-active-high;
- nvidia,lp0-vec = <0xbdffd000 0x2000>;
-};
-
-/ Tegra board dts file
-{
- ...
- pmc@7000f400 {
- i2c-thermtrip {
- nvidia,i2c-controller-id = <4>;
- nvidia,bus-addr = <0x40>;
- nvidia,reg-addr = <0x36>;
- nvidia,reg-data = <0x2>;
- };
- };
- ...
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
- ...
-};
-
-
-== Powergate Nodes ==
-
-Each of the powergate nodes represents a power-domain on the Tegra SoC
-that can be power-gated by the Tegra PMC. The name of the powergate node
-should be one of the below. Note that not every powergate is applicable
-to all Tegra devices and the following list shows which powergates are
-applicable to which devices. Please refer to the Tegra TRM for more
-details on the various powergates.
-
- Name Description Devices Applicable
- 3d 3D Graphics Tegra20/114/124/210
- 3d0 3D Graphics 0 Tegra30
- 3d1 3D Graphics 1 Tegra30
- aud Audio Tegra210
- dfd Debug Tegra210
- dis Display A Tegra114/124/210
- disb Display B Tegra114/124/210
- heg 2D Graphics Tegra30/114/124/210
- iram Internal RAM Tegra124/210
- mpe MPEG Encode All
- nvdec NVIDIA Video Decode Engine Tegra210
- nvjpg NVIDIA JPEG Engine Tegra210
- pcie PCIE Tegra20/30/124/210
- sata SATA Tegra30/124/210
- sor Display interfaces Tegra124/210
- ve2 Video Encode Engine 2 Tegra210
- venc Video Encode Engine All
- vdec Video Decode Engine Tegra20/30/114/124
- vic Video Imaging Compositor Tegra124/210
- xusba USB Partition A Tegra114/124/210
- xusbb USB Partition B Tegra114/124/210
- xusbc USB Partition C Tegra114/124/210
-
-Required properties:
- - clocks: Must contain an entry for each clock required by the PMC for
- controlling a power-gate. See ../clocks/clock-bindings.txt for details.
- - resets: Must contain an entry for each reset required by the PMC for
- controlling a power-gate. See ../reset/reset.txt for details.
- - #power-domain-cells: Must be 0.
-
-Example:
-
- pmc: pmc@7000e400 {
- compatible = "nvidia,tegra210-pmc";
- reg = <0x0 0x7000e400 0x0 0x400>;
- clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
- clock-names = "pclk", "clk32k_in";
-
- powergates {
- pd_audio: aud {
- clocks = <&tegra_car TEGRA210_CLK_APE>,
- <&tegra_car TEGRA210_CLK_APB2APE>;
- resets = <&tegra_car 198>;
- #power-domain-cells = <0>;
- };
- };
- };
-
-
-== Powergate Clients ==
-
-Hardware blocks belonging to a power domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding powergate node.
-
-Example:
-
- adma: adma@702e2000 {
- ...
- power-domains = <&pd_audio>;
- ...
- };
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-The pad configuration state nodes are placed under the pmc node and they
-are referred to by the pinctrl client properties. For more information
-see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-The pad name should be used as the value of the pins property in pin
-configuration nodes.
-
-The following pads are present on Tegra124 and Tegra132:
-audio bb cam comp
-csia csb cse dsi
-dsib dsic dsid hdmi
-hsic hv lvds mipi-bias
-nand pex-bias pex-clk1 pex-clk2
-pex-cntrl sdmmc1 sdmmc3 sdmmc4
-sys_ddc uart usb0 usb1
-usb2 usb_bias
-
-The following pads are present on Tegra210:
-audio audio-hv cam csia
-csib csic csid csie
-csif dbg debug-nonao dmic
-dp dsi dsib dsic
-dsid emmc emmc2 gpio
-hdmi hsic lvds mipi-bias
-pex-bias pex-clk1 pex-clk2 pex-cntrl
-sdmmc1 sdmmc3 spi spi-hv
-uart usb0 usb1 usb2
-usb3 usb-bias
-
-Required pin configuration properties:
- - pins: Must contain name of the pad(s) to be configured.
-
-Optional pin configuration properties:
- - low-power-enable: Configure the pad into power down mode
- - low-power-disable: Configure the pad into active mode
- - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
- or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
- The values are defined in
- include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the Tegra124 and
- Tegra132 pads. None of the Tegra124 or Tegra132 pads support
- signaling voltage switching.
-
-Note: All of the listed Tegra210 pads except pex-cntrl support power
- state configuration. Signaling voltage switching is supported on
- following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
- pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
-
-Pad configuration state example:
- pmc: pmc@7000e400 {
- compatible = "nvidia,tegra210-pmc";
- reg = <0x0 0x7000e400 0x0 0x400>;
- clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
- clock-names = "pclk", "clk32k_in";
-
- ...
-
- sdmmc1_3v3: sdmmc1-3v3 {
- pins = "sdmmc1";
- power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
- };
-
- sdmmc1_1v8: sdmmc1-1v8 {
- pins = "sdmmc1";
- power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
- };
-
- hdmi_off: hdmi-off {
- pins = "hdmi";
- low-power-enable;
- }
-
- hdmi_on: hdmi-on {
- pins = "hdmi";
- low-power-disable;
- }
- };
-
-Pinctrl client example:
- sdmmc1: sdhci@700b0000 {
- ...
- pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
- pinctrl-0 = <&sdmmc1_3v3>;
- pinctrl-1 = <&sdmmc1_1v8>;
- };
- ...
- sor@54540000 {
- ...
- pinctrl-0 = <&hdmi_off>;
- pinctrl-1 = <&hdmi_on>;
- pinctrl-names = "hdmi-on", "hdmi-off";
- };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
new file mode 100644
index 000000000000..f17bb353f65e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Power Management Controller (PMC)
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-pmc
+ - nvidia,tegra20-pmc
+ - nvidia,tegra30-pmc
+ - nvidia,tegra114-pmc
+ - nvidia,tegra124-pmc
+ - nvidia,tegra210-pmc
+
+ reg:
+ maxItems: 1
+ description:
+ Offset and length of the register set for the device.
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: clk32k_in
+ description:
+ Must includes entries pclk and clk32k_in.
+ pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
+ input to Tegra.
+
+ clocks:
+ maxItems: 2
+ description:
+ Must contain an entry for each entry in clock-names.
+ See ../clocks/clocks-bindings.txt for details.
+
+ '#clock-cells':
+ const: 1
+ description:
+ Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
+ PMC also has blink control which allows 32Khz clock output to
+ Tegra blink pad.
+ Consumer of PMC clock should specify the desired clock by having
+ the clock ID in its "clocks" phandle cell with pmc clock provider.
+ See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
+ clock IDs.
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ Specifies number of cells needed to encode an interrupt source.
+ The value must be 2.
+
+ interrupt-controller: true
+
+ nvidia,invert-interrupt:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Inverts the PMU interrupt signal.
+ The PMU is an external Power Management Unit, whose interrupt output
+ signal is fed into the PMC. This signal is optionally inverted, and
+ then fed into the ARM GIC. The PMC is not involved in the detection
+ or handling of this interrupt signal, merely its inversion.
+
+ nvidia,core-power-req-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Core power request active-high.
+
+ nvidia,sys-clock-req-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: System clock request active-high.
+
+ nvidia,combined-power-req:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: combined power request for CPU and Core.
+
+ nvidia,cpu-pwr-good-en:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ CPU power good signal from external PMIC to PMC is enabled.
+
+ nvidia,suspend-mode:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1, 2]
+ description:
+ The suspend mode that the platform should use.
+ Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
+ Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
+ Mode 2 is for LP2, CPU voltage off
+
+ nvidia,cpu-pwr-good-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: CPU power good time in uSec.
+
+ nvidia,cpu-pwr-off-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: CPU power off time in uSec.
+
+ nvidia,core-pwr-good-time:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ <Oscillator-stable-time Power-stable-time>
+ Core power good time in uSec.
+
+ nvidia,core-pwr-off-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Core power off time in uSec.
+
+ nvidia,lp0-vec:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ <start length> Starting address and length of LP0 vector.
+ The LP0 vector contains the warm boot code that is executed
+ by AVP when resuming from the LP0 state.
+ The AVP (Audio-Video Processor) is an ARM7 processor and
+ always being the first boot processor when chip is power on
+ or resume from deep sleep mode. When the system is resumed
+ from the deep sleep mode, the warm boot code will restore
+ some PLLs, clocks and then brings up CPU0 for resuming the
+ system.
+
+ i2c-thermtrip:
+ type: object
+ description:
+ On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
+ hardware-triggered thermal reset will be enabled.
+
+ properties:
+ nvidia,i2c-controller-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ ID of I2C controller to send poweroff command to PMU.
+ Valid values are described in section 9.2.148
+ "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
+ Manual.
+
+ nvidia,bus-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Bus address of the PMU on the I2C bus.
+
+ nvidia,reg-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: PMU I2C register address to issue poweroff command.
+
+ nvidia,reg-data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Poweroff command to write to PMU.
+
+ nvidia,pinmux-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Pinmux used by the hardware when issuing Poweroff command.
+ Defaults to 0. Valid values are described in section 12.5.2
+ "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
+ required:
+ - nvidia,i2c-controller-id
+ - nvidia,bus-addr
+ - nvidia,reg-addr
+ - nvidia,reg-data
+
+ additionalProperties: false
+
+ powergates:
+ type: object
+ description: |
+ This node contains a hierarchy of power domain nodes, which should
+ match the powergates on the Tegra SoC. Each powergate node
+ represents a power-domain on the Tegra SoC that can be power-gated
+ by the Tegra PMC.
+ Hardware blocks belonging to a power domain should contain
+ "power-domains" property that is a phandle pointing to corresponding
+ powergate node.
+ The name of the powergate node should be one of the below. Note that
+ not every powergate is applicable to all Tegra devices and the following
+ list shows which powergates are applicable to which devices.
+ Please refer to Tegra TRM for mode details on the powergate nodes to
+ use for each power-gate block inside Tegra.
+ Name Description Devices Applicable
+ 3d 3D Graphics Tegra20/114/124/210
+ 3d0 3D Graphics 0 Tegra30
+ 3d1 3D Graphics 1 Tegra30
+ aud Audio Tegra210
+ dfd Debug Tegra210
+ dis Display A Tegra114/124/210
+ disb Display B Tegra114/124/210
+ heg 2D Graphics Tegra30/114/124/210
+ iram Internal RAM Tegra124/210
+ mpe MPEG Encode All
+ nvdec NVIDIA Video Decode Engine Tegra210
+ nvjpg NVIDIA JPEG Engine Tegra210
+ pcie PCIE Tegra20/30/124/210
+ sata SATA Tegra30/124/210
+ sor Display interfaces Tegra124/210
+ ve2 Video Encode Engine 2 Tegra210
+ venc Video Encode Engine All
+ vdec Video Decode Engine Tegra20/30/114/124
+ vic Video Imaging Compositor Tegra124/210
+ xusba USB Partition A Tegra114/124/210
+ xusbb USB Partition B Tegra114/124/210
+ xusbc USB Partition C Tegra114/124/210
+
+ patternProperties:
+ "^[a-z0-9]+$":
+ type: object
+
+ patternProperties:
+ clocks:
+ minItems: 1
+ maxItems: 8
+ description:
+ Must contain an entry for each clock required by the PMC
+ for controlling a power-gate.
+ See ../clocks/clock-bindings.txt document for more details.
+
+ resets:
+ minItems: 1
+ maxItems: 8
+ description:
+ Must contain an entry for each reset required by the PMC
+ for controlling a power-gate.
+ See ../reset/reset.txt for more details.
+
+ '#power-domain-cells':
+ const: 0
+ description: Must be 0.
+
+ required:
+ - clocks
+ - resets
+ - '#power-domain-cells'
+
+ additionalProperties: false
+
+patternProperties:
+ "^[a-f0-9]+-[a-f0-9]+$":
+ type: object
+ description:
+ This is a Pad configuration node. On Tegra SOCs a pad is a set of
+ pins which are configured as a group. The pin grouping is a fixed
+ attribute of the hardware. The PMC can be used to set pad power state
+ and signaling voltage. A pad can be either in active or power down mode.
+ The support for power state and signaling voltage configuration varies
+ depending on the pad in question. 3.3V and 1.8V signaling voltages
+ are supported on pins where software controllable signaling voltage
+ switching is available.
+
+ The pad configuration state nodes are placed under the pmc node and they
+ are referred to by the pinctrl client properties. For more information
+ see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+ The pad name should be used as the value of the pins property in pin
+ configuration nodes.
+
+ The following pads are present on Tegra124 and Tegra132
+ audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
+ hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
+ sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.
+
+ The following pads are present on Tegra210
+ audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
+ debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
+ hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
+ sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.
+
+ properties:
+ pins:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Must contain name of the pad(s) to be configured.
+
+ low-power-enable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Configure the pad into power down mode.
+
+ low-power-disable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Configure the pad into active mode.
+
+ power-source:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+ TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+ Power state can be configured on all Tegra124 and Tegra132
+ pads. None of the Tegra124 or Tegra132 pads support signaling
+ voltage switching.
+ All of the listed Tegra210 pads except pex-cntrl support power
+ state configuration. Signaling voltage switching is supported
+ on below Tegra210 pads.
+ audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
+ sdmmc3, spi, spi-hv, and uart.
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+ - '#clock-cells'
+
+dependencies:
+ "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+ "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
+ "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+
+examples:
+ - |
+
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+ #include <dt-bindings/soc/tegra-pmc.h>
+
+ tegra_pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra210-pmc";
+ reg = <0x0 0x7000e400 0x0 0x400>;
+ clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+ #clock-cells = <1>;
+
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <0>;
+ nvidia,cpu-pwr-off-time = <0>;
+ nvidia,core-pwr-good-time = <4587 3876>;
+ nvidia,core-pwr-off-time = <39065>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+
+ powergates {
+ pd_audio: aud {
+ clocks = <&tegra_car TEGRA210_CLK_APE>,
+ <&tegra_car TEGRA210_CLK_APB2APE>;
+ resets = <&tegra_car 198>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_xusbss: xusba {
+ clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+ resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 9fb682e47c29..38c5fa21f435 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -37,6 +37,7 @@ Required properties:
- Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
- Tegra210: "nvidia,tegra210-xusb-padctl"
- Tegra186: "nvidia,tegra186-xusb-padctl"
+ - Tegra194: "nvidia,tegra194-xusb-padctl"
- reg: Physical base address and length of the controller's registers.
- resets: Must contain an entry for each entry in reset-names.
- reset-names: Must include the following entries:
@@ -62,6 +63,10 @@ For Tegra186:
- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
+For Tegra194:
+- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
+ 3.3 V.
+- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
Pad nodes:
==========
@@ -154,6 +159,11 @@ For Tegra210, the list of valid PHY nodes is given below:
- sata: sata-0
- functions: "usb3-ss", "sata"
+For Tegra194, the list of valid PHY nodes is given below:
+- usb2: usb2-0, usb2-1, usb2-2, usb2-3
+ - functions: "xusb"
+- usb3: usb3-0, usb3-1, usb3-2, usb3-3
+ - functions: "xusb"
Port nodes:
===========
@@ -174,6 +184,12 @@ Required properties:
- "device": for USB device mode
- "otg": for USB OTG mode
+Required properties for OTG/Peripheral capable USB2 ports:
+- usb-role-switch: Boolean property to indicate that the port support OTG or
+ peripheral mode. If present, the port supports switching between USB host
+ and peripheral roles. Connector should be added as subnode.
+ See usb/usb-conn-gpio.txt.
+
Optional properties:
- nvidia,internal: A boolean property whose presence determines that a port
is internal. In the absence of this property the port is considered to be
@@ -221,6 +237,11 @@ Optional properties:
is internal. In the absence of this property the port is considered to be
external.
+- maximum-speed: Only for Tegra194. A string property that specifies maximum
+ supported speed of a usb3 port. Valid values are:
+ - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed.
+ - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only.
+
For Tegra124 and Tegra132, the XUSB pad controller exposes the following
ports:
- 3x USB2: usb2-0, usb2-1, usb2-2
@@ -233,6 +254,9 @@ For Tegra210, the XUSB pad controller exposes the following ports:
- 2x HSIC: hsic-0, hsic-1
- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
+For Tegra194, the XUSB pad controller exposes the following ports:
+- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
+- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
Examples:
=========
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index 7a32404c6114..ecac2bbeae45 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -20,6 +20,7 @@ Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
"mediatek,mt6765-pwrap" for MT6765 SoCs
+ "mediatek,mt6779-pwrap" for MT6779 SoCs
"mediatek,mt6797-pwrap" for MT6797 SoCs
"mediatek,mt7622-pwrap" for MT7622 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
new file mode 100644
index 000000000000..b84ed8ee8cfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
+
+description:
+ The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
+ USB 3.0 SuperSpeed protocols.
+
+maintainers:
+ - Nagarjuna Kristam <nkristam@nvidia.com>
+ - JC Kuo <jckuo@nvidia.com>
+ - Thierry Reding <treding@nvidia.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - nvidia,tegra210-xudc # For Tegra210
+ - nvidia,tegra186-xudc # For Tegra186
+
+ reg:
+ minItems: 2
+ maxItems: 3
+ items:
+ - description: XUSB device controller registers
+ - description: XUSB device PCI Config registers
+ - description: XUSB device registers.
+
+ reg-names:
+ minItems: 2
+ maxItems: 3
+ items:
+ - const: base
+ - const: fpci
+ - const: ipfs
+
+ interrupts:
+ maxItems: 1
+ description: Must contain the XUSB device interrupt.
+
+ clocks:
+ minItems: 4
+ maxItems: 5
+ items:
+ - description: Clock to enable core XUSB dev clock.
+ - description: Clock to enable XUSB super speed clock.
+ - description: Clock to enable XUSB super speed dev clock.
+ - description: Clock to enable XUSB high speed dev clock.
+ - description: Clock to enable XUSB full speed dev clock.
+
+ clock-names:
+ minItems: 4
+ maxItems: 5
+ items:
+ - const: dev
+ - const: ss
+ - const: ss_src
+ - const: fs_src
+ - const: hs_src
+
+ power-domains:
+ maxItems: 2
+ items:
+ - description: XUSBB(device) power-domain
+ - description: XUSBA(superspeed) power-domain
+
+ power-domain-names:
+ maxItems: 2
+ items:
+ - const: dev
+ - const: ss
+
+ nvidia,xusb-padctl:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ phandle to the XUSB pad controller that is used to configure the USB pads
+ used by the XUDC controller.
+
+ phys:
+ minItems: 1
+ description:
+ Must contain an entry for each entry in phy-names.
+ See ../phy/phy-bindings.txt for details.
+
+ phy-names:
+ minItems: 1
+ items:
+ - const: usb2-0
+ - const: usb2-1
+ - const: usb2-2
+ - const: usb2-3
+ - const: usb3-0
+ - const: usb3-1
+ - const: usb3-2
+ - const: usb3-3
+
+ avddio-usb-supply:
+ description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+ hvdd-usb-supply:
+ description: USB controller power supply. Must supply 3.3 V.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - nvidia,xusb-padctl
+ - phys
+ - phy-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra210-xudc
+ then:
+ properties:
+ reg:
+ minItems: 3
+ reg-names:
+ minItems: 3
+ clocks:
+ minItems: 5
+ clock-names:
+ minItems: 5
+ required:
+ - avddio-usb-supply
+ - hvdd-usb-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra186-xudc
+ then:
+ properties:
+ reg:
+ maxItems: 2
+ reg-names:
+ maxItems: 2
+ clocks:
+ maxItems: 4
+ clock-names:
+ maxItems: 4
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ usb@700d0000 {
+ compatible = "nvidia,tegra210-xudc";
+ reg = <0x0 0x700d0000 0x0 0x8000>,
+ <0x0 0x700d8000 0x0 0x1000>,
+ <0x0 0x700d9000 0x0 0x1000>;
+ reg-names = "base", "fpci", "ipfs";
+
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+ <&tegra_car TEGRA210_CLK_XUSB_SS>,
+ <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+ <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+ <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+ clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+
+ power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+ power-domain-names = "dev", "ss";
+
+ nvidia,xusb-padctl = <&padctl>;
+
+ phys = <&micro_b>;
+ phy-names = "usb2-0";
+
+ avddio-usb-supply = <&vdd_pex_1v05>;
+ hvdd-usb-supply = <&vdd_3v3_sys>;
+ };
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b70d7debf5ca..f46e18a77645 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1201,23 +1201,49 @@ choice
config STM32F4_DEBUG_UART
bool "Use STM32F4 UART for low-level debug"
- depends on ARCH_STM32
+ depends on MACH_STM32F429 || MACH_STM32F469
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32F4 based platforms, which default UART is wired on
- USART1.
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
If unsure, say N.
config STM32F7_DEBUG_UART
bool "Use STM32F7 UART for low-level debug"
- depends on ARCH_STM32
+ depends on MACH_STM32F746 || MACH_STM32F769
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32F7 based platforms, which default UART is wired on
- USART1.
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
+
+ If unsure, say N.
+
+ config STM32H7_DEBUG_UART
+ bool "Use STM32H7 UART for low-level debug"
+ depends on MACH_STM32H743
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32H7 based platforms, which default UART is wired on
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
+
+ If unsure, say N.
+
+ config STM32MP1_DEBUG_UART
+ bool "Use STM32MP1 UART for low-level debug"
+ depends on MACH_STM32MP157
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32MP1 based platforms, wich default UART is wired on
+ UART4, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
If unsure, say N.
@@ -1619,6 +1645,9 @@ config DEBUG_UART_PHYS
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x3f201000 if DEBUG_BCM2836
default 0x4000e400 if DEBUG_LL_UART_EFM32
+ default 0x40010000 if STM32MP1_DEBUG_UART
+ default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+ STM32H7_DEBUG_UART
default 0x40028000 if DEBUG_AT91_SAMV7_USART1
default 0x40081000 if DEBUG_LPC18XX_UART0
default 0x40090000 if DEBUG_LPC32XX
@@ -1713,7 +1742,7 @@ config DEBUG_UART_PHYS
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART
+ DEBUG_AT91_UART || DEBUG_STM32_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1779,6 +1808,7 @@ config DEBUG_UART_VIRT
default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
default 0xfd883000 if DEBUG_ALPINE_UART0
+ default 0xfe010000 if STM32MP1_DEBUG_UART
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1823,7 +1853,7 @@ config DEBUG_UART_VIRT
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART
+ DEBUG_AT91_UART || DEBUG_STM32_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e1d13d779e08..7d5cd0f85461 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_MESON) := 0x00208000
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 54f1a21de7e0..15cb35b4a57b 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -56,6 +56,8 @@ CONFIG_CPUFREQ_DT=m
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
CONFIG_ARM_TI_CPUFREQ=y
CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_DT_IDLE_STATES=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_PM_DEBUG=y
CONFIG_ARM_CRYPTO=y
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
index 1abb32f685fd..f3c4a37210ed 100644
--- a/arch/arm/include/debug/stm32.S
+++ b/arch/arm/include/debug/stm32.S
@@ -4,14 +4,13 @@
* Author: Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
*/
-#define STM32_UART_BASE 0x40011000 /* USART1 */
-
#ifdef CONFIG_STM32F4_DEBUG_UART
#define STM32_USART_SR_OFF 0x00
#define STM32_USART_TDR_OFF 0x04
#endif
-#ifdef CONFIG_STM32F7_DEBUG_UART
+#if defined(CONFIG_STM32F7_DEBUG_UART) || defined(CONFIG_STM32H7_DEBUG_UART) || \
+ defined(CONFIG_STM32MP1_DEBUG_UART)
#define STM32_USART_SR_OFF 0x1C
#define STM32_USART_TDR_OFF 0x28
#endif
@@ -20,8 +19,8 @@
#define STM32_USART_TXE (1 << 7) /* Tx data reg empty */
.macro addruart, rp, rv, tmp
- ldr \rp, =STM32_UART_BASE @ physical base
- ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical base
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virt base
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 7979420bd48b..ccd7e80ce943 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -153,7 +153,6 @@ config HAVE_AT91_USB_CLK
config COMMON_CLK_AT91
bool
- select COMMON_CLK
select MFD_SYSCON
config HAVE_AT91_SMD
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 374b9d155558..074bde64064e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -736,13 +736,36 @@ backup_default:
struct pmc_info {
unsigned long uhp_udp_mask;
+ unsigned long mckr;
+ unsigned long version;
};
static const struct pmc_info pmc_infos[] __initconst = {
- { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
- { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
- { .uhp_udp_mask = AT91SAM926x_PMC_UHP },
- { .uhp_udp_mask = 0 },
+ {
+ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
+ .mckr = 0x30,
+ .version = AT91_PMC_V1,
+ },
+
+ {
+ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+ .mckr = 0x30,
+ .version = AT91_PMC_V1,
+ },
+ {
+ .uhp_udp_mask = AT91SAM926x_PMC_UHP,
+ .mckr = 0x30,
+ .version = AT91_PMC_V1,
+ },
+ { .uhp_udp_mask = 0,
+ .mckr = 0x30,
+ .version = AT91_PMC_V1,
+ },
+ {
+ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+ .mckr = 0x28,
+ .version = AT91_PMC_V2,
+ },
};
static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -757,7 +780,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
- { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
+ { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
{ /* sentinel */ },
};
@@ -779,6 +802,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
pmc = of_id->data;
soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
+ soc_pm.data.pmc_mckr_offset = pmc->mckr;
+ soc_pm.data.pmc_version = pmc->version;
if (pm_idle)
arm_pm_idle = pm_idle;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 9fa4f483f2b5..218e8d1a30fb 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -33,6 +33,8 @@ struct at91_pm_data {
void __iomem *sfrbu;
unsigned int standby_mode;
unsigned int suspend_mode;
+ unsigned int pmc_mckr_offset;
+ unsigned int pmc_version;
};
#endif
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index f2d893c03cd9..82089ff258c0 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -12,6 +12,10 @@ int main(void)
DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc));
DEFINE(PM_DATA_SFRBU, offsetof(struct at91_pm_data, sfrbu));
+ DEFINE(PM_DATA_PMC_MCKR_OFFSET, offsetof(struct at91_pm_data,
+ pmc_mckr_offset));
+ DEFINE(PM_DATA_PMC_VERSION, offsetof(struct at91_pm_data,
+ pmc_version));
return 0;
}
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index ed57c879d4e1..be9764e8d3fa 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -18,6 +18,7 @@
pmc .req r0
tmp1 .req r4
tmp2 .req r5
+tmp3 .req r6
/*
* Wait until master clock is ready (after switching master clock source)
@@ -93,13 +94,17 @@ ENTRY(at91_pm_suspend_in_sram)
str tmp1, .memtype
ldr tmp1, [r0, #PM_DATA_MODE]
str tmp1, .pm_mode
+ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+ str tmp1, .mckr_offset
+ ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
+ str tmp1, .pmc_version
/* Both ldrne below are here to preload their address in the TLB */
ldr tmp1, [r0, #PM_DATA_SHDWC]
str tmp1, .shdwc
cmp tmp1, #0
ldrne tmp2, [tmp1, #0]
ldr tmp1, [r0, #PM_DATA_SFRBU]
- str tmp1, .sfr
+ str tmp1, .sfrbu
cmp tmp1, #0
ldrne tmp2, [tmp1, #0x10]
@@ -138,14 +143,15 @@ ENDPROC(at91_pm_suspend_in_sram)
ENTRY(at91_backup_mode)
/* Switch the master clock source to slow clock. */
ldr pmc, .pmc_base
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp2, .mckr_offset
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
/*BUMEN*/
- ldr r0, .sfr
+ ldr r0, .sfrbu
mov tmp1, #0x1
str tmp1, [r0, #0x10]
@@ -218,6 +224,7 @@ ENDPROC(at91_backup_mode)
*/
.macro at91_pm_ulp1_mode
ldr pmc, .pmc_base
+ ldr tmp2, .mckr_offset
/* Save RC oscillator state and check if it is enabled. */
ldr tmp1, [pmc, #AT91_PMC_SR]
@@ -254,10 +261,10 @@ ENDPROC(at91_backup_mode)
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Switch the master clock source to main clock */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -268,6 +275,10 @@ ENDPROC(at91_backup_mode)
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
+ /* Quirk for SAM9X60's PMC */
+ nop
+ nop
+
wait_mckrdy
/* Enable the crystal oscillator */
@@ -280,9 +291,9 @@ ENDPROC(at91_backup_mode)
wait_moscrdy
/* Switch the master clock source to slow clock */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -296,10 +307,10 @@ ENDPROC(at91_backup_mode)
wait_moscsels
/* Switch the master clock source to main clock */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -323,21 +334,160 @@ ENDPROC(at91_backup_mode)
3:
.endm
+.macro at91_plla_disable
+ /* Save PLLA setting and disable it */
+ ldr tmp1, .pmc_version
+ cmp tmp1, #AT91_PMC_V1
+ beq 1f
+
+#ifdef CONFIG_SOC_SAM9X60
+ /* Save PLLA settings. */
+ ldr tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+ bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
+ str tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+
+ /* save div. */
+ mov tmp1, #0
+ ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
+ bic tmp2, tmp2, #0xffffff00
+ orr tmp1, tmp1, tmp2
+
+ /* save mul. */
+ ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL1]
+ bic tmp2, tmp2, #0xffffff
+ orr tmp1, tmp1, tmp2
+ str tmp1, .saved_pllar
+
+ /* step 2. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+ str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+ /* step 3. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+ bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+ orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+ str tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+ /* step 4. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+ orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+ str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+ /* step 5. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+ bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+ str tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+ /* step 7. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+ orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+ str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+ b 2f
+#endif
+
+1: /* Save PLLA setting and disable it */
+ ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
+ str tmp1, .saved_pllar
+
+ /* Disable PLLA. */
+ mov tmp1, #AT91_PMC_PLLCOUNT
+ orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
+ str tmp1, [pmc, #AT91_CKGR_PLLAR]
+2:
+.endm
+
+.macro at91_plla_enable
+ ldr tmp2, .saved_pllar
+ ldr tmp3, .pmc_version
+ cmp tmp3, #AT91_PMC_V1
+ beq 4f
+
+#ifdef CONFIG_SOC_SAM9X60
+ /* step 1. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+ str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+ /* step 2. */
+ ldr tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA
+ str tmp1, [pmc, #AT91_PMC_PLL_ACR]
+
+ /* step 3. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+ mov tmp3, tmp2
+ bic tmp3, tmp3, #0xffffff
+ orr tmp1, tmp1, tmp3
+ str tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+
+ /* step 8. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+ orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+ str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+ /* step 9. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+ orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK
+ orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+ orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+ bic tmp1, tmp1, #0xff
+ mov tmp3, tmp2
+ bic tmp3, tmp3, #0xffffff00
+ orr tmp1, tmp1, tmp3
+ str tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+ /* step 10. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+ orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+ str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+ /* step 11. */
+3: ldr tmp1, [pmc, #AT91_PMC_PLL_ISR0]
+ tst tmp1, #0x1
+ beq 3b
+ b 2f
+#endif
+
+ /* Restore PLLA setting */
+4: str tmp2, [pmc, #AT91_CKGR_PLLAR]
+
+ /* Enable PLLA. */
+ tst tmp2, #(AT91_PMC_MUL & 0xff0000)
+ bne 1f
+ tst tmp2, #(AT91_PMC_MUL & ~0xff0000)
+ beq 2f
+
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_LOCKA
+ beq 1b
+2:
+.endm
+
ENTRY(at91_ulp_mode)
ldr pmc, .pmc_base
+ ldr tmp2, .mckr_offset
/* Save Master clock setting */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic tmp1, tmp1, #AT91_PMC_CSS
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
+ at91_plla_disable
+
ldr r0, .pm_mode
cmp r0, #AT91_PM_ULP1
beq ulp1_mode
@@ -352,11 +502,14 @@ ulp1_mode:
ulp_exit:
ldr pmc, .pmc_base
+ at91_plla_enable
+
/*
* Restore master clock setting
*/
- ldr tmp1, .saved_mckr
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, .mckr_offset
+ ldr tmp2, .saved_mckr
+ str tmp2, [pmc, tmp1]
wait_mckrdy
@@ -496,14 +649,20 @@ ENDPROC(at91_sramc_self_refresh)
.word 0
.shdwc:
.word 0
-.sfr:
+.sfrbu:
.word 0
.memtype:
.word 0
.pm_mode:
.word 0
+.mckr_offset:
+ .word 0
+.pmc_version:
+ .word 0
.saved_mckr:
.word 0
+.saved_pllar:
+ .word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index fcfe2a0e8058..6aa938b949db 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -20,7 +20,6 @@ config ARCH_BCM_IPROC
select GPIOLIB
select ARM_AMBA
select PINCTRL
- select PCI_DOMAINS_GENERIC if PCI
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
@@ -54,7 +53,6 @@ config ARCH_BCM_NSP
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
- select HAVE_SMP
select THERMAL
select THERMAL_OF
help
@@ -73,7 +71,6 @@ config ARCH_BCM_5301X
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
- select HAVE_SMP
help
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
@@ -109,7 +106,6 @@ config ARCH_BCM_281XX
bool "Broadcom BCM281XX SoC family"
depends on ARCH_MULTI_V7
select ARCH_BCM_MOBILE
- select HAVE_SMP
help
Enable support for the BCM281XX family, which includes
BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155
@@ -119,7 +115,6 @@ config ARCH_BCM_21664
bool "Broadcom BCM21664 SoC family"
depends on ARCH_MULTI_V7
select ARCH_BCM_MOBILE
- select HAVE_SMP
help
Enable support for the BCM21664 family, which includes
BCM21663 and BCM21664 variants.
@@ -128,7 +123,6 @@ config ARCH_BCM_23550
bool "Broadcom BCM23550 SoC"
depends on ARCH_MULTI_V7
select ARCH_BCM_MOBILE
- select HAVE_SMP
help
Enable support for the BCM23550.
@@ -165,7 +159,6 @@ config ARCH_BCM2835
select ZONE_DMA if ARCH_MULTI_V7
select ARM_TIMER_SP804
select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
- select TIMER_OF
select BCM2835_TIMER
select PINCTRL
select PINCTRL_BCM2835
@@ -201,7 +194,6 @@ config ARCH_BCM_63XX
select HAVE_ARM_ARCH_TIMER
select HAVE_ARM_TWD if SMP
select HAVE_ARM_SCU if SMP
- select HAVE_SMP
help
This enables support for systems based on Broadcom DSL SoCs.
It currently supports the 'BCM63XX' ARM-based family, which includes
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 1d61a7701c11..e4f4b20b83a2 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction cns3xxx_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = cns3xxx_timer_interrupt,
-};
-
/*
* Set up the clock source and clock events devices
*/
@@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* Make irqs happen for the system timer */
- setup_irq(timer_irq, &cns3xxx_timer_irq);
+ if (request_irq(timer_irq, cns3xxx_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
+ pr_err("Failed to request irq %d (timer)\n", timer_irq);
cns3xxx_clockevents_init(timer_irq);
}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 01b830afcea9..dbe970e37895 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -48,7 +48,7 @@
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
-static struct map_desc dove_io_desc[] __initdata = {
+static struct map_desc __maybe_unused dove_io_desc[] __initdata = {
{
.virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..dd4b164d1831 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ep93xx_timer_irq = {
- .name = "ep93xx timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ep93xx_timer_interrupt,
- .dev_id = &ep93xx_clockevent,
-};
-
void __init ep93xx_timer_init(void)
{
+ int irq = IRQ_EP93XX_TIMER3;
+ unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+
/* Enable and register clocksource and sched_clock on timer 4 */
writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
EP93XX_TIMER4_VALUE_HIGH);
@@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
EP93XX_TIMER4_RATE);
/* Set up clockevent on timer 3 */
- setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+ if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+ &ep93xx_clockevent))
+ pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
clockevents_config_and_register(&ep93xx_clockevent,
EP93XX_TIMER123_RATE,
1,
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 95584ee02b55..e7d7b90e2cf8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -471,8 +471,6 @@ config SOC_IMX53
config SOC_IMX6
bool
select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
- select ARM_ERRATA_754322
- select ARM_ERRATA_775420
select ARM_GIC
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
@@ -484,6 +482,8 @@ config SOC_IMX6
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD
select PINCTRL_IMX6Q
@@ -494,6 +494,8 @@ config SOC_IMX6Q
config SOC_IMX6SL
bool "i.MX6 SoloLite support"
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
select PINCTRL_IMX6SL
select SOC_IMX6
@@ -502,6 +504,8 @@ config SOC_IMX6SL
config SOC_IMX6SLL
bool "i.MX6 SoloLiteLite support"
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
select PINCTRL_IMX6SLL
select SOC_IMX6
@@ -510,6 +514,8 @@ config SOC_IMX6SLL
config SOC_IMX6SX
bool "i.MX6 SoloX support"
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
select PINCTRL_IMX6SX
select SOC_IMX6
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 8fb68c0ec34c..d841bed8664d 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -89,12 +89,11 @@ void imx_anatop_post_resume(void)
if (cpu_is_imx6sl())
imx_anatop_disconnect_high_snvs(false);
-
}
void __init imx_init_revision_from_anatop(void)
{
- struct device_node *np;
+ struct device_node *np, *src_np;
void __iomem *anatop_base;
unsigned int revision;
u32 digprog;
@@ -135,9 +134,10 @@ void __init imx_init_revision_from_anatop(void)
void __iomem *src_base;
u32 sbmr2;
- np = of_find_compatible_node(NULL, NULL,
+ src_np = of_find_compatible_node(NULL, NULL,
"fsl,imx6ul-src");
src_base = of_iomap(np, 0);
+ of_node_put(src_np);
WARN_ON(!src_base);
sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
iounmap(src_base);
@@ -149,6 +149,7 @@ void __init imx_init_revision_from_anatop(void)
}
}
}
+ of_node_put(np);
mxc_set_cpu_type(digprog >> 16 & 0xff);
imx_set_soc_revision(revision);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index b5b557fe2c49..ebc4339b8be4 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -10,7 +10,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/irqchip/arm-gic.h>
+
#include "common.h"
#include "hardware.h"
@@ -111,7 +111,6 @@ void imx_gpc_mask_all(void)
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
writel_relaxed(~0, reg_imr1 + i * 4);
}
-
}
void imx_gpc_restore_all(void)
@@ -282,4 +281,5 @@ void __init imx_gpc_check_dt(void)
/* map GPC, so that at least CPUidle and WARs keep working */
gpc_base = of_iomap(np, 0);
}
+ of_node_put(np);
}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index edd26e0ffeec..284bce1112d2 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -5,29 +5,16 @@
*/
#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/cpu.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
#include <linux/irqchip.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pm_opp.h>
#include <linux/pci.h>
#include <linux/phy.h>
-#include <linux/reboot.h>
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/system_misc.h>
#include "common.h"
#include "cpuidle.h"
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index e00818abe54d..e27a6889cc56 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -4,7 +4,6 @@
*/
#include <linux/irqchip.h>
-#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 311f5e4ff723..3b0e16ccd59d 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -25,7 +25,6 @@ static void __init imx6ul_enet_clk_init(void)
IMX6UL_GPR1_ENET_CLK_OUTPUT);
else
pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-
}
static int ksz8081_phy_fixup(struct phy_device *dev)
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 2aa26928221d..cf4e9335831c 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -109,6 +109,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
dcfg_base = of_iomap(np, 0);
+ of_node_put(np);
BUG_ON(!dcfg_base);
paddr = __pa_symbol(secondary_startup);
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 1c0ecad3620e..dd34dff13762 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -655,6 +655,8 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
imx6_pm_stby_poweroff_probe();
+
+ of_node_put(np);
}
void __init imx6q_pm_init(void)
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
index 7b2f7387e662..2e756d8191fa 100644
--- a/arch/arm/mach-imx/pm-imx7ulp.c
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -62,6 +62,7 @@ void __init imx7ulp_pm_init(void)
np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
smc1_base = of_iomap(np, 0);
+ of_node_put(np);
WARN_ON(!smc1_base);
imx7ulp_set_lpm(ULP_PM_RUN);
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 0beea6d0217f..f52f371292ac 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -43,9 +43,6 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
int bit;
u32 val;
- if (!src_base)
- return -ENODEV;
-
if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
return -EINVAL;
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
index 18a4df5c1baa..ae533b66fefd 100644
--- a/arch/arm/mach-iop32x/time.c
+++ b/arch/arm/mach-iop32x/time.c
@@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction iop_timer_irq = {
- .name = "IOP Timer Tick",
- .handler = iop_timer_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .dev_id = &iop_clockevent,
-};
-
static unsigned long iop_tick_rate;
unsigned long get_iop_tick_rate(void)
{
@@ -154,6 +147,7 @@ EXPORT_SYMBOL(get_iop_tick_rate);
void __init iop_init_time(unsigned long tick_rate)
{
u32 timer_ctl;
+ int irq = IRQ_IOP32X_TIMER0;
sched_clock_register(iop_read_sched_clock, 32, tick_rate);
@@ -168,7 +162,9 @@ void __init iop_init_time(unsigned long tick_rate)
*/
write_tmr0(timer_ctl & ~IOP_TMR_EN);
write_tisr(1);
- setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq);
+ if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "IOP Timer Tick", &iop_clockevent))
+ pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
iop_clockevent.cpumask = cpumask_of(0);
clockevents_config_and_register(&iop_clockevent, tick_rate,
0xf, 0xfffffffe);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index c65cfc1ad99b..049a65f47b42 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -175,13 +175,6 @@ static void __init timer_config(void)
__raw_writel(0x2, mmp_timer_base + TMR_CER);
}
-static struct irqaction timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = timer_interrupt,
- .dev_id = &ckevt,
-};
-
void __init mmp_timer_init(int irq, unsigned long rate)
{
timer_config();
@@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate)
ckevt.cpumask = cpumask_of(0);
- setup_irq(irq, &timer_irq);
+ if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "timer", &ckevt))
+ pr_err("Failed to request irq %d (timer)\n", irq);
clocksource_register_hz(&cksrc, rate);
clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d068958d6f8a..2c1e2b32b9b3 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
return IRQ_HANDLED;
}
-static struct irqaction omap_wakeup_irq = {
- .name = "peripheral wakeup",
- .handler = omap_wakeup_interrupt
-};
-
static const struct platform_suspend_ops omap_pm_ops = {
@@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
static int __init omap_pm_init(void)
{
int error = 0;
+ int irq;
if (!cpu_class_is_omap1())
return -ENODEV;
@@ -656,9 +652,12 @@ static int __init omap_pm_init(void)
arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
- setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+ irq = INT_7XX_WAKE_UP_REQ;
else if (cpu_is_omap16xx())
- setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+ irq = INT_1610_WAKE_UP_REQ;
+ if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
+ NULL))
+ pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 524977a31a49..de590a85a42b 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap_mpu_timer1_irq = {
- .name = "mpu_timer1",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap_mpu_timer1_interrupt,
-};
-
static __init void omap_init_mpu_timer(unsigned long rate)
{
- setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+ if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+ pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0ae6c52a7d70..780fdf03c3ce 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap_32k_timer_irq = {
- .name = "32KHz timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap_32k_timer_interrupt,
-};
-
static __init void omap_init_32k_timer(void)
{
- setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+ if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+ pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);
clockevent_32k_timer.cpumask = cpumask_of(0);
clockevents_config_and_register(&clockevent_32k_timer,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 17d337ed18be..82706af307de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3148,15 +3148,14 @@ static int omap_hwmod_check_sysc(struct device *dev,
/**
* omap_hwmod_init_regbits - init sysconfig specific register bits
* @dev: struct device
+ * @oh: module
* @data: module data
* @sysc_fields: new sysc configuration
*/
-static int omap_hwmod_init_regbits(struct device *dev,
+static int omap_hwmod_init_regbits(struct device *dev, struct omap_hwmod *oh,
const struct ti_sysc_module_data *data,
struct sysc_regbits **sysc_fields)
{
- *sysc_fields = NULL;
-
switch (data->cap->type) {
case TI_SYSC_OMAP2:
case TI_SYSC_OMAP2_TIMER:
@@ -3191,6 +3190,12 @@ static int omap_hwmod_init_regbits(struct device *dev,
*sysc_fields = &omap_hwmod_sysc_type_usb_host_fs;
break;
default:
+ *sysc_fields = NULL;
+ if (!oh->class->sysc->sysc_fields)
+ return 0;
+
+ dev_err(dev, "sysc_fields not found\n");
+
return -EINVAL;
}
@@ -3356,9 +3361,9 @@ static int omap_hwmod_check_module(struct device *dev,
if (!oh->class->sysc)
return -ENODEV;
- if (sysc_fields != oh->class->sysc->sysc_fields)
- dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields,
- oh->class->sysc->sysc_fields);
+ if (oh->class->sysc->sysc_fields &&
+ sysc_fields != oh->class->sysc->sysc_fields)
+ dev_warn(dev, "sysc_fields mismatch\n");
if (rev_offs != oh->class->sysc->rev_offs)
dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs,
@@ -3574,7 +3579,7 @@ int omap_hwmod_init_module(struct device *dev,
cookie->data = oh;
- error = omap_hwmod_init_regbits(dev, data, &sysc_fields);
+ error = omap_hwmod_init_regbits(dev, oh, data, &sysc_fields);
if (error)
return error;
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 7461b0346549..5455fc98c60e 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -6,11 +6,14 @@
* Dave Gerlach
*/
+#include <linux/cpuidle.h>
+#include <linux/platform_data/pm33xx.h>
+#include <asm/cpuidle.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <linux/errno.h>
-#include <linux/platform_data/pm33xx.h>
#include <linux/clk.h>
+#include <linux/cpu.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/wkup_m3_ipc.h>
@@ -35,6 +38,14 @@ static struct clockdomain *gfx_l4ls_clkdm;
static void __iomem *scu_base;
static struct omap_hwmod *rtc_oh;
+static int (*idle_fn)(u32 wfi_flags);
+
+struct amx3_idle_state {
+ int wfi_flags;
+};
+
+static struct amx3_idle_state *idle_states;
+
static int am43xx_map_scu(void)
{
scu_base = ioremap(scu_a9_get_base(), SZ_256);
@@ -68,7 +79,7 @@ static int am43xx_check_off_mode_enable(void)
return 0;
}
-static int amx3_common_init(void)
+static int amx3_common_init(int (*idle)(u32 wfi_flags))
{
gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
per_pwrdm = pwrdm_lookup("per_pwrdm");
@@ -88,10 +99,12 @@ static int amx3_common_init(void)
else
omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
+ idle_fn = idle;
+
return 0;
}
-static int am33xx_suspend_init(void)
+static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
{
int ret;
@@ -102,12 +115,12 @@ static int am33xx_suspend_init(void)
return -ENODEV;
}
- ret = amx3_common_init();
+ ret = amx3_common_init(idle);
return ret;
}
-static int am43xx_suspend_init(void)
+static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
{
int ret = 0;
@@ -117,11 +130,17 @@ static int am43xx_suspend_init(void)
return ret;
}
- ret = amx3_common_init();
+ ret = amx3_common_init(idle);
return ret;
}
+static int amx3_suspend_deinit(void)
+{
+ idle_fn = NULL;
+ return 0;
+}
+
static void amx3_pre_suspend_common(void)
{
omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
@@ -201,6 +220,43 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
return ret;
}
+static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
+{
+ int ret = 0;
+
+ if (omap_irq_pending() || need_resched())
+ return ret;
+
+ ret = cpu_suspend(args, fn);
+
+ return ret;
+}
+
+static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
+{
+ int ret = 0;
+
+ if (!scu_base)
+ return 0;
+
+ scu_power_mode(scu_base, SCU_PM_DORMANT);
+ ret = cpu_suspend(args, fn);
+ scu_power_mode(scu_base, SCU_PM_NORMAL);
+
+ return ret;
+}
+
+static void amx3_begin_suspend(void)
+{
+ cpu_idle_poll_ctrl(true);
+}
+
+static void amx3_finish_suspend(void)
+{
+ cpu_idle_poll_ctrl(false);
+}
+
+
static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
{
if (soc_is_am33xx())
@@ -253,7 +309,11 @@ static void am43xx_prepare_rtc_resume(void)
static struct am33xx_pm_platform_data am33xx_ops = {
.init = am33xx_suspend_init,
+ .deinit = amx3_suspend_deinit,
.soc_suspend = am33xx_suspend,
+ .cpu_suspend = am33xx_cpu_suspend,
+ .begin_suspend = amx3_begin_suspend,
+ .finish_suspend = amx3_finish_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am33xx_save_context,
.restore_context = am33xx_restore_context,
@@ -265,7 +325,11 @@ static struct am33xx_pm_platform_data am33xx_ops = {
static struct am33xx_pm_platform_data am43xx_ops = {
.init = am43xx_suspend_init,
+ .deinit = amx3_suspend_deinit,
.soc_suspend = am43xx_suspend,
+ .cpu_suspend = am43xx_cpu_suspend,
+ .begin_suspend = amx3_begin_suspend,
+ .finish_suspend = amx3_finish_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am43xx_save_context,
.restore_context = am43xx_restore_context,
@@ -301,3 +365,64 @@ int __init amx3_common_pm_init(void)
return 0;
}
+
+static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
+{
+ struct device_node *state_node;
+ struct amx3_idle_state states[CPUIDLE_STATE_MAX];
+ int i;
+ int state_count = 1;
+
+ for (i = 0; ; i++) {
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ if (!state_node)
+ break;
+
+ if (!of_device_is_available(state_node))
+ continue;
+
+ if (i == CPUIDLE_STATE_MAX) {
+ pr_warn("%s: cpuidle states reached max possible\n",
+ __func__);
+ break;
+ }
+
+ states[state_count].wfi_flags = 0;
+
+ if (of_property_read_bool(state_node, "ti,idle-wkup-m3"))
+ states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
+ WFI_FLAG_FLUSH_CACHE;
+
+ state_count++;
+ }
+
+ idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL);
+ if (!idle_states)
+ return -ENOMEM;
+
+ for (i = 1; i < state_count; i++)
+ idle_states[i].wfi_flags = states[i].wfi_flags;
+
+ return 0;
+}
+
+static int amx3_idle_enter(unsigned long index)
+{
+ struct amx3_idle_state *idle_state = &idle_states[index];
+
+ if (!idle_state)
+ return -EINVAL;
+
+ if (idle_fn)
+ idle_fn(idle_state->wfi_flags);
+
+ return 0;
+}
+
+static struct cpuidle_ops amx3_cpuidle_ops __initdata = {
+ .init = amx3_idle_init,
+ .suspend = amx3_idle_enter,
+};
+
+CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops);
+CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 0d0a731cb476..8b09cdacc30d 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap2_gp_timer_irq = {
- .name = "gp_timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap2_gp_timer_interrupt,
-};
-
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
@@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
&clockevent_gpt.name, OMAP_TIMER_POSTED);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = &clkev;
- setup_irq(clkev.irq, &omap2_gp_timer_irq);
+ if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
+ pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index cf9cb3d2590e..e94a61901ffd 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -3,7 +3,6 @@ menuconfig ARCH_ORION5X
bool "Marvell Orion"
depends on MMU && ARCH_MULTI_V5
select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
select GPIOLIB
select MVEBU_MBUS
select FORCE_PCI
@@ -18,7 +17,6 @@ if ARCH_ORION5X
config ARCH_ORION5X_DT
bool "Marvell Orion5x Flattened Device Tree"
- select USE_OF
select ORION_CLK
select ORION_IRQCHIP
select ORION_TIMER
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index fda9b75c3a33..a39764faf2a0 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -398,7 +398,6 @@ static int ts78xx_fpga_load_devices(void)
static int ts78xx_fpga_unload_devices(void)
{
- int ret = 0;
if (ts78xx_fpga.supports.ts_rtc.present == 1)
ts78xx_ts_rtc_unload();
@@ -407,7 +406,7 @@ static int ts78xx_fpga_unload_devices(void)
if (ts78xx_fpga.supports.ts_rng.present == 1)
ts78xx_ts_rng_unload();
- return ret;
+ return 0;
}
static int ts78xx_fpga_load(void)
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index ecbf3c4eb878..1772eccb5caf 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM
if ARCH_QCOM
+config ARCH_IPQ40XX
+ bool "Enable support for IPQ40XX"
+ select CLKSRC_QCOM
+ select HAVE_ARM_ARCH_TIMER
+
config ARCH_MSM8X60
bool "Enable support for MSM8X60"
select CLKSRC_QCOM
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b13ec9088ce5..86406e3f9b22 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = {
DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
.smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
- .init_early = shmobile_init_delay,
.init_irq = r8a7779_init_irq_dt,
.init_late = shmobile_init_late,
.dt_compat = r8a7779_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 2fd3aa6f3212..1ee5cd2840e0 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -7,7 +7,6 @@
* Copyright (C) 2014 Ulrich Hecht
*/
-#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/device.h>
#include <linux/dma-contiguous.h>
@@ -15,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/memblock.h>
#include <linux/of.h>
+#include <linux/of_clk.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/psci.h>
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index cc08aa752244..eb4a62fa4289 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = {
DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
- .init_early = shmobile_init_delay,
.init_machine = sh73a0_generic_init,
.init_late = shmobile_init_late,
.dt_compat = sh73a0_boards_compat_dt,
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index 289e036c9c30..d1fdb6066f7b 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction spear_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER,
- .handler = spear_timer_interrupt
-};
-
static void __init spear_clockevent_init(int irq)
{
u32 tick_rate;
@@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
- setup_irq(irq, &spear_timer_irq);
+ if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
+ pr_err("Failed to request irq %d (timer)\n", irq);
}
static const struct of_device_id timer_of_match[] __initconst = {
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 933b6930f024..06da2747a90b 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,9 +10,9 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/init.h>
+#include <linux/of_clk.h>
#include <linux/platform_device.h>
#include <linux/reset/sunxi.h>
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 6c1dff2eccc2..07572b5373b8 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -8,29 +8,14 @@ obj-y += reset.o
obj-y += reset-handler.o
obj-y += sleep.o
obj-y += tegra.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o
+obj-y += sleep-tegra20.o
+obj-y += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o
-endif
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o
-endif
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
-endif
-obj-$(CONFIG_ARCH_TEGRA_124_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_124_SOC) += cpuidle-tegra114.o
-endif
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
deleted file mode 100644
index 5118f777fd66..000000000000
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
- */
-
-#include <asm/firmware.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <linux/firmware/trusted_foundations.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-#include <asm/psci.h>
-
-#include "cpuidle.h"
-#include "pm.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-#define TEGRA114_MAX_STATES 2
-#else
-#define TEGRA114_MAX_STATES 1
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra114_idle_power_down(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- local_fiq_disable();
-
- tegra_set_cpu_in_lp2();
- cpu_pm_enter();
-
- call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
-
- /* Do suspend by ourselves if the firmware does not implement it */
- if (call_firmware_op(do_idle, 0) == -ENOSYS)
- cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
-
- cpu_pm_exit();
- tegra_clear_cpu_in_lp2();
-
- local_fiq_enable();
-
- return index;
-}
-
-static void tegra114_idle_enter_s2idle(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- tegra114_idle_power_down(dev, drv, index);
-}
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
- .name = "tegra_idle",
- .owner = THIS_MODULE,
- .state_count = TEGRA114_MAX_STATES,
- .states = {
- [0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
- [1] = {
- .enter = tegra114_idle_power_down,
- .enter_s2idle = tegra114_idle_enter_s2idle,
- .exit_latency = 500,
- .target_residency = 1000,
- .flags = CPUIDLE_FLAG_TIMER_STOP,
- .power_usage = 0,
- .name = "powered-down",
- .desc = "CPU power gated",
- },
-#endif
- },
-};
-
-int __init tegra114_cpuidle_init(void)
-{
- if (!psci_smp_available())
- return cpuidle_register(&tegra_idle_driver, NULL);
-
- return 0;
-}
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
deleted file mode 100644
index 69f3fa270fbe..000000000000
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- * Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/clk/tegra.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <soc/tegra/flowctrl.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-#include "cpuidle.h"
-#include "iomap.h"
-#include "irq.h"
-#include "pm.h"
-#include "reset.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-static bool abort_flag;
-static atomic_t abort_barrier;
-static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index);
-#define TEGRA20_MAX_STATES 2
-#else
-#define TEGRA20_MAX_STATES 1
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
- .name = "tegra_idle",
- .owner = THIS_MODULE,
- .states = {
- ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
- {
- .enter = tegra20_idle_lp2_coupled,
- .exit_latency = 5000,
- .target_residency = 10000,
- .power_usage = 0,
- .flags = CPUIDLE_FLAG_COUPLED |
- CPUIDLE_FLAG_TIMER_STOP,
- .name = "powered-down",
- .desc = "CPU power gated",
- },
-#endif
- },
- .state_count = TEGRA20_MAX_STATES,
- .safe_state_index = 0,
-};
-
-#ifdef CONFIG_PM_SLEEP
-#ifdef CONFIG_SMP
-static int tegra20_reset_sleeping_cpu_1(void)
-{
- int ret = 0;
-
- tegra_pen_lock();
-
- if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE)
- tegra20_cpu_shutdown(1);
- else
- ret = -EINVAL;
-
- tegra_pen_unlock();
-
- return ret;
-}
-
-static void tegra20_wake_cpu1_from_reset(void)
-{
- tegra_pen_lock();
-
- tegra20_cpu_clear_resettable();
-
- /* enable cpu clock on cpu */
- tegra_enable_cpu_clock(1);
-
- /* take the CPU out of reset */
- tegra_cpu_out_of_reset(1);
-
- /* unhalt the cpu */
- flowctrl_write_cpu_halt(1, 0);
-
- tegra_pen_unlock();
-}
-
-static int tegra20_reset_cpu_1(void)
-{
- if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1())
- return 0;
-
- tegra20_wake_cpu1_from_reset();
- return -EBUSY;
-}
-#else
-static inline void tegra20_wake_cpu1_from_reset(void)
-{
-}
-
-static inline int tegra20_reset_cpu_1(void)
-{
- return 0;
-}
-#endif
-
-static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- while (tegra20_cpu_is_resettable_soon())
- cpu_relax();
-
- if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready())
- return false;
-
- tegra_idle_lp2_last();
-
- if (cpu_online(1))
- tegra20_wake_cpu1_from_reset();
-
- return true;
-}
-
-#ifdef CONFIG_SMP
-static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- cpu_suspend(0, tegra20_sleep_cpu_secondary_finish);
-
- tegra20_cpu_clear_resettable();
-
- return true;
-}
-#else
-static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- return true;
-}
-#endif
-
-static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- bool entered_lp2 = false;
-
- if (tegra_pending_sgi())
- WRITE_ONCE(abort_flag, true);
-
- cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
-
- if (abort_flag) {
- cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
- abort_flag = false; /* clean flag for next coming */
- return -EINTR;
- }
-
- local_fiq_disable();
-
- tegra_set_cpu_in_lp2();
- cpu_pm_enter();
-
- if (dev->cpu == 0)
- entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index);
- else
- entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index);
-
- cpu_pm_exit();
- tegra_clear_cpu_in_lp2();
-
- local_fiq_enable();
-
- smp_rmb();
-
- return entered_lp2 ? index : 0;
-}
-#endif
-
-/*
- * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
- * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around
- * this, simply disable LP2 if the PCI driver and DT node are both enabled.
- */
-void tegra20_cpuidle_pcie_irqs_in_use(void)
-{
- pr_info_once(
- "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n");
- cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true);
-}
-
-int __init tegra20_cpuidle_init(void)
-{
- return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
-}
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
deleted file mode 100644
index c6128526877d..000000000000
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- * Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/clk/tegra.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-#include "cpuidle.h"
-#include "pm.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra30_idle_lp2(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index);
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
- .name = "tegra_idle",
- .owner = THIS_MODULE,
-#ifdef CONFIG_PM_SLEEP
- .state_count = 2,
-#else
- .state_count = 1,
-#endif
- .states = {
- [0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
- [1] = {
- .enter = tegra30_idle_lp2,
- .exit_latency = 2000,
- .target_residency = 2200,
- .power_usage = 0,
- .flags = CPUIDLE_FLAG_TIMER_STOP,
- .name = "powered-down",
- .desc = "CPU power gated",
- },
-#endif
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- /* All CPUs entering LP2 is not working.
- * Don't let CPU0 enter LP2 when any secondary CPU is online.
- */
- if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) {
- cpu_do_idle();
- return false;
- }
-
- tegra_idle_lp2_last();
-
- return true;
-}
-
-#ifdef CONFIG_SMP
-static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- smp_wmb();
-
- cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
-
- return true;
-}
-#else
-static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- return true;
-}
-#endif
-
-static int tegra30_idle_lp2(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- bool entered_lp2 = false;
- bool last_cpu;
-
- local_fiq_disable();
-
- last_cpu = tegra_set_cpu_in_lp2();
- cpu_pm_enter();
-
- if (dev->cpu == 0) {
- if (last_cpu)
- entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv,
- index);
- else
- cpu_do_idle();
- } else {
- entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index);
- }
-
- cpu_pm_exit();
- tegra_clear_cpu_in_lp2();
-
- local_fiq_enable();
-
- smp_rmb();
-
- return (entered_lp2) ? index : 0;
-}
-#endif
-
-int __init tegra30_cpuidle_init(void)
-{
- return cpuidle_register(&tegra_idle_driver, NULL);
-}
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
deleted file mode 100644
index d565c44cfc93..000000000000
--- a/arch/arm/mach-tegra/cpuidle.c
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-tegra/cpuidle.c
- *
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- * Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <soc/tegra/fuse.h>
-
-#include "cpuidle.h"
-
-void __init tegra_cpuidle_init(void)
-{
- switch (tegra_get_chip_id()) {
- case TEGRA20:
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
- tegra20_cpuidle_init();
- break;
- case TEGRA30:
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
- tegra30_cpuidle_init();
- break;
- case TEGRA114:
- case TEGRA124:
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
- IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
- tegra114_cpuidle_init();
- break;
- }
-}
-
-void tegra_cpuidle_pcie_irqs_in_use(void)
-{
- switch (tegra_get_chip_id()) {
- case TEGRA20:
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
- tegra20_cpuidle_pcie_irqs_in_use();
- break;
- }
-}
diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h
deleted file mode 100644
index 4e1f459f5bd8..000000000000
--- a/arch/arm/mach-tegra/cpuidle.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
- */
-
-#ifndef __MACH_TEGRA_CPUIDLE_H
-#define __MACH_TEGRA_CPUIDLE_H
-
-#ifdef CONFIG_CPU_IDLE
-int tegra20_cpuidle_init(void);
-void tegra20_cpuidle_pcie_irqs_in_use(void);
-int tegra30_cpuidle_init(void);
-int tegra114_cpuidle_init(void);
-void tegra_cpuidle_init(void);
-void tegra_cpuidle_pcie_irqs_in_use(void);
-#else
-static inline void tegra_cpuidle_init(void) {}
-static inline void tegra_cpuidle_pcie_irqs_in_use(void) {}
-#endif
-
-#endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index ace7a390b5fe..4e1ee70b2a3f 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -18,9 +18,10 @@
#include <linux/of.h>
#include <linux/syscore_ops.h>
+#include <soc/tegra/irq.h>
+
#include "board.h"
#include "iomap.h"
-#include "irq.h"
#define SGI_MASK 0xFFFF
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 3cab81b82866..d1e1a61b12cf 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -110,7 +110,7 @@ static void suspend_cpu_complex(void)
flowctrl_cpu_suspend_enter(cpu);
}
-void tegra_clear_cpu_in_lp2(void)
+void tegra_pm_clear_cpu_in_lp2(void)
{
int phy_cpu_id = cpu_logical_map(smp_processor_id());
u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
@@ -123,11 +123,9 @@ void tegra_clear_cpu_in_lp2(void)
spin_unlock(&tegra_lp2_lock);
}
-bool tegra_set_cpu_in_lp2(void)
+void tegra_pm_set_cpu_in_lp2(void)
{
int phy_cpu_id = cpu_logical_map(smp_processor_id());
- bool last_cpu = false;
- cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
spin_lock(&tegra_lp2_lock);
@@ -135,22 +133,15 @@ bool tegra_set_cpu_in_lp2(void)
BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
*cpu_in_lp2 |= BIT(phy_cpu_id);
- if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
- last_cpu = true;
- else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1)
- tegra20_cpu_set_resettable_soon();
-
spin_unlock(&tegra_lp2_lock);
- return last_cpu;
-}
-
-int tegra_cpu_do_idle(void)
-{
- return cpu_do_idle();
}
static int tegra_sleep_cpu(unsigned long v2p)
{
+ if (tegra_cpu_car_ops->rail_off_ready &&
+ WARN_ON(!tegra_cpu_rail_off_ready()))
+ return -EBUSY;
+
/*
* L2 cache disabling using kernel API only allowed when all
* secondary CPU's are offline. Cache have to be disabled with
@@ -159,9 +150,10 @@ static int tegra_sleep_cpu(unsigned long v2p)
* if any of secondary CPU's is online and this is the LP2-idle
* code-path only for Tegra20/30.
*/
- if (trusted_foundations_registered())
- outer_disable();
-
+#ifdef CONFIG_OUTER_CACHE
+ if (trusted_foundations_registered() && outer_cache.disable)
+ outer_cache.disable();
+#endif
/*
* Note that besides of setting up CPU reset vector this firmware
* call may also do the following, depending on the FW version:
@@ -202,14 +194,16 @@ static void tegra_pm_set(enum tegra_suspend_mode mode)
tegra_pmc_enter_suspend_mode(mode);
}
-void tegra_idle_lp2_last(void)
+int tegra_pm_enter_lp2(void)
{
+ int err;
+
tegra_pm_set(TEGRA_SUSPEND_LP2);
cpu_cluster_pm_enter();
suspend_cpu_complex();
- cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+ err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
/*
* Resume L2 cache if it wasn't re-enabled early during resume,
@@ -221,6 +215,8 @@ void tegra_idle_lp2_last(void)
restore_cpu_complex();
cpu_cluster_pm_exit();
+
+ return err;
}
enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
@@ -365,7 +361,7 @@ static int tegra_suspend_enter(suspend_state_t state)
tegra_suspend_enter_lp1();
break;
case TEGRA_SUSPEND_LP2:
- tegra_set_cpu_in_lp2();
+ tegra_pm_set_cpu_in_lp2();
break;
default:
break;
@@ -386,7 +382,7 @@ static int tegra_suspend_enter(suspend_state_t state)
tegra_suspend_exit_lp1();
break;
case TEGRA_SUSPEND_LP2:
- tegra_clear_cpu_in_lp2();
+ tegra_pm_clear_cpu_in_lp2();
break;
default:
break;
@@ -436,4 +432,18 @@ void __init tegra_init_suspend(void)
suspend_set_ops(&tegra_suspend_ops);
}
+
+int tegra_pm_park_secondary_cpu(unsigned long cpu)
+{
+ if (cpu > 0) {
+ tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
+
+ if (tegra_get_chip_id() == TEGRA20)
+ tegra20_hotplug_shutdown();
+ else
+ tegra30_hotplug_shutdown();
+ }
+
+ return -EINVAL;
+}
#endif
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 569151b3edc0..81525f5f4a44 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -23,10 +23,6 @@ void tegra20_sleep_core_init(void);
void tegra30_lp1_iram_hook(void);
void tegra30_sleep_core_init(void);
-void tegra_clear_cpu_in_lp2(void);
-bool tegra_set_cpu_in_lp2(void);
-int tegra_cpu_do_idle(void);
-void tegra_idle_lp2_last(void);
extern void (*tegra_tear_down_cpu)(void);
#ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index e3f34815c9da..53123ae4ac3b 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -183,17 +183,6 @@ after_errata:
bleq __die @ CPU not present (to OS)
#endif
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
- /* Are we on Tegra20? */
- cmp r6, #TEGRA20
- bne 1f
- /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
- mov r0, #CPU_NOT_RESETTABLE
- cmp r10, #0
- strbne r0, [r12, #RESET_DATA(RESETTABLE_STATUS)]
-1:
-#endif
-
/* Waking up from LP1? */
ldr r8, [r12, #RESET_DATA(MASK_LP1)]
tst r8, r11 @ if in_lp1
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index a4cfc08159f6..51265592cb1a 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -16,9 +16,8 @@
#define TEGRA_RESET_STARTUP_SECONDARY 3
#define TEGRA_RESET_STARTUP_LP2 4
#define TEGRA_RESET_STARTUP_LP1 5
-#define TEGRA_RESET_RESETTABLE_STATUS 6
-#define TEGRA_RESET_TF_PRESENT 7
-#define TEGRA_RESET_DATA_SIZE 8
+#define TEGRA_RESET_TF_PRESENT 6
+#define TEGRA_RESET_DATA_SIZE 7
#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
@@ -42,10 +41,6 @@ void __tegra_cpu_reset_handler_end(void);
(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
(u32)__tegra_cpu_reset_handler_start)))
-#define tegra20_cpu1_resettable_status \
- (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
- ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \
- (u32)__tegra_cpu_reset_handler_start)))
#endif
#define tegra_cpu_reset_handler_offset \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 9a89f30d53ca..0e00ba8cf646 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -43,9 +43,6 @@
#define APB_MISC_XM2CFGCPADCTRL2 0x8e4
#define APB_MISC_XM2CFGDPADCTRL2 0x8e8
-#define __tegra20_cpu1_resettable_status_offset \
- (__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS))
-
.macro pll_enable, rd, r_car_base, pll_base
ldr \rd, [\r_car_base, #\pll_base]
tst \rd, #(1 << 30)
@@ -90,10 +87,6 @@ ENDPROC(tegra20_hotplug_shutdown)
ENTRY(tegra20_cpu_shutdown)
cmp r0, #0
reteq lr @ must not be called for CPU 0
- mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
- ldr r2, =__tegra20_cpu1_resettable_status_offset
- mov r12, #CPU_RESETTABLE
- strb r12, [r1, r2]
cpu_to_halt_reg r1, r0
ldr r3, =TEGRA_FLOW_CTRL_VIRT
@@ -117,107 +110,6 @@ ENDPROC(tegra20_cpu_shutdown)
#ifdef CONFIG_PM_SLEEP
/*
- * tegra_pen_lock
- *
- * spinlock implementation with no atomic test-and-set and no coherence
- * using Peterson's algorithm on strongly-ordered registers
- * used to synchronize a cpu waking up from wfi with entering lp2 on idle
- *
- * The reference link of Peterson's algorithm:
- * http://en.wikipedia.org/wiki/Peterson's_algorithm
- *
- * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm)
- * on cpu 0:
- * r2 = flag[0] (in SCRATCH38)
- * r3 = flag[1] (in SCRATCH39)
- * on cpu1:
- * r2 = flag[1] (in SCRATCH39)
- * r3 = flag[0] (in SCRATCH38)
- *
- * must be called with MMU on
- * corrupts r0-r3, r12
- */
-ENTRY(tegra_pen_lock)
- mov32 r3, TEGRA_PMC_VIRT
- cpu_id r0
- add r1, r3, #PMC_SCRATCH37
- cmp r0, #0
- addeq r2, r3, #PMC_SCRATCH38
- addeq r3, r3, #PMC_SCRATCH39
- addne r2, r3, #PMC_SCRATCH39
- addne r3, r3, #PMC_SCRATCH38
-
- mov r12, #1
- str r12, [r2] @ flag[cpu] = 1
- dsb
- str r12, [r1] @ !turn = cpu
-1: dsb
- ldr r12, [r3]
- cmp r12, #1 @ flag[!cpu] == 1?
- ldreq r12, [r1]
- cmpeq r12, r0 @ !turn == cpu?
- beq 1b @ while !turn == cpu && flag[!cpu] == 1
-
- ret lr @ locked
-ENDPROC(tegra_pen_lock)
-
-ENTRY(tegra_pen_unlock)
- dsb
- mov32 r3, TEGRA_PMC_VIRT
- cpu_id r0
- cmp r0, #0
- addeq r2, r3, #PMC_SCRATCH38
- addne r2, r3, #PMC_SCRATCH39
- mov r12, #0
- str r12, [r2]
- ret lr
-ENDPROC(tegra_pen_unlock)
-
-/*
- * tegra20_cpu_clear_resettable(void)
- *
- * Called to clear the "resettable soon" flag in IRAM variable when
- * it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_clear_resettable)
- mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
- ldr r2, =__tegra20_cpu1_resettable_status_offset
- mov r12, #CPU_NOT_RESETTABLE
- strb r12, [r1, r2]
- ret lr
-ENDPROC(tegra20_cpu_clear_resettable)
-
-/*
- * tegra20_cpu_set_resettable_soon(void)
- *
- * Called to set the "resettable soon" flag in IRAM variable when
- * it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_set_resettable_soon)
- mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
- ldr r2, =__tegra20_cpu1_resettable_status_offset
- mov r12, #CPU_RESETTABLE_SOON
- strb r12, [r1, r2]
- ret lr
-ENDPROC(tegra20_cpu_set_resettable_soon)
-
-/*
- * tegra20_cpu_is_resettable_soon(void)
- *
- * Returns true if the "resettable soon" flag in IRAM variable has been
- * set because it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_is_resettable_soon)
- mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
- ldr r2, =__tegra20_cpu1_resettable_status_offset
- ldrb r12, [r1, r2]
- cmp r12, #CPU_RESETTABLE_SOON
- moveq r0, #1
- movne r0, #0
- ret lr
-ENDPROC(tegra20_cpu_is_resettable_soon)
-
-/*
* tegra20_sleep_core_finish(unsigned long v2p)
*
* Enters suspend in LP0 or LP1 by turning off the mmu and jumping to
@@ -243,68 +135,6 @@ ENTRY(tegra20_sleep_core_finish)
ENDPROC(tegra20_sleep_core_finish)
/*
- * tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
- *
- * Enters WFI on secondary CPU by exiting coherency.
- */
-ENTRY(tegra20_sleep_cpu_secondary_finish)
- stmfd sp!, {r4-r11, lr}
-
- mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency
-
- /* Flush and disable the L1 data cache */
- mov r0, #TEGRA_FLUSH_CACHE_LOUIS
- bl tegra_disable_clean_inv_dcache
-
- mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT
- ldr r4, =__tegra20_cpu1_resettable_status_offset
- mov r3, #CPU_RESETTABLE
- strb r3, [r0, r4]
-
- bl tegra_cpu_do_idle
-
- /*
- * cpu may be reset while in wfi, which will return through
- * tegra_resume to cpu_resume
- * or interrupt may wake wfi, which will return here
- * cpu state is unchanged - MMU is on, cache is on, coherency
- * is off, and the data cache is off
- *
- * r11 contains the original actlr
- */
-
- bl tegra_pen_lock
-
- mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT
- ldr r4, =__tegra20_cpu1_resettable_status_offset
- mov r3, #CPU_NOT_RESETTABLE
- strb r3, [r0, r4]
-
- bl tegra_pen_unlock
-
- /* Re-enable the data cache */
- mrc p15, 0, r10, c1, c0, 0
- orr r10, r10, #CR_C
- mcr p15, 0, r10, c1, c0, 0
- isb
-
- mcr p15, 0, r11, c1, c0, 1 @ reenable coherency
-
- /* Invalidate the TLBs & BTAC */
- mov r1, #0
- mcr p15, 0, r1, c8, c3, 0 @ invalidate shared TLBs
- mcr p15, 0, r1, c7, c1, 6 @ invalidate shared BTAC
- dsb
- isb
-
- /* the cpu was running with coherency disabled,
- * caches may be out of date */
- bl v7_flush_kern_cache_louis
-
- ldmfd sp!, {r4 - r11, pc}
-ENDPROC(tegra20_sleep_cpu_secondary_finish)
-
-/*
* tegra20_tear_down_cpu
*
* Switches the CPU cluster to PLL-P and enters sleep.
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 02cc6ff96f30..e7bcf7dc4675 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -265,11 +265,11 @@ ENTRY(tegra30_sleep_core_finish)
ENDPROC(tegra30_sleep_core_finish)
/*
- * tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
+ * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg)
*
* Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
*/
-ENTRY(tegra30_sleep_cpu_secondary_finish)
+ENTRY(tegra30_pm_secondary_cpu_suspend)
mov r7, lr
/* Flush and disable the L1 data cache */
@@ -281,7 +281,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish)
bl tegra30_cpu_shutdown
mov r0, #1 @ never return here
ret r7
-ENDPROC(tegra30_sleep_cpu_secondary_finish)
+ENDPROC(tegra30_pm_secondary_cpu_suspend)
/*
* tegra30_tear_down_cpu
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 78ef32a907c8..4718a3cb45a1 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -114,29 +114,14 @@
.endm
#else
-void tegra_pen_lock(void);
-void tegra_pen_unlock(void);
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
void tegra_disable_clean_inv_dcache(u32 flag);
-#ifdef CONFIG_HOTPLUG_CPU
void tegra20_hotplug_shutdown(void);
void tegra30_hotplug_shutdown(void);
-#endif
-
-void tegra20_cpu_shutdown(int cpu);
-int tegra20_cpu_is_resettable_soon(void);
-void tegra20_cpu_clear_resettable(void);
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void tegra20_cpu_set_resettable_soon(void);
-#else
-static inline void tegra20_cpu_set_resettable_soon(void) {}
-#endif
-int tegra20_sleep_cpu_secondary_finish(unsigned long);
void tegra20_tear_down_cpu(void);
-int tegra30_sleep_cpu_secondary_finish(unsigned long);
void tegra30_tear_down_cpu(void);
#endif
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index e512e606eabd..f1ce2857a251 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -36,13 +36,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
+#include <asm/psci.h>
#include <asm/setup.h>
#include "board.h"
#include "common.h"
-#include "cpuidle.h"
#include "iomap.h"
-#include "irq.h"
#include "pm.h"
#include "reset.h"
#include "sleep.h"
@@ -86,7 +85,6 @@ static void __init tegra_dt_init(void)
static void __init tegra_dt_init_late(void)
{
tegra_init_suspend();
- tegra_cpuidle_init();
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
of_machine_is_compatible("compal,paz00"))
@@ -95,6 +93,9 @@ static void __init tegra_dt_init_late(void)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
of_machine_is_compatible("nvidia,tegra20"))
platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0);
+
+ if (IS_ENABLED(CONFIG_ARM_TEGRA_CPUIDLE) && !psci_smp_available())
+ platform_device_register_simple("tegra-cpuidle", -1, NULL, 0);
}
static const char * const tegra_dt_board_compat[] = {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 3a4248fd7962..a9dd2f71cd19 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -12,10 +12,10 @@
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/clk-provider.h>
#include <linux/clk/zynq.h>
#include <linux/clocksource.h>
#include <linux/of_address.h>
+#include <linux/of_clk.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index ffb93db68e9c..509d4824dc1c 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction orion_timer_irq = {
- .name = "orion_tick",
- .flags = IRQF_TIMER,
- .handler = orion_timer_interrupt
-};
-
void __init
orion_time_set_base(void __iomem *_timer_base)
{
@@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
/*
* Setup clockevent timer (interrupt-driven).
*/
- setup_irq(irq, &orion_timer_irq);
+ if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
+ NULL))
+ pr_err("Failed to request irq %u (orion_tick)\n", irq);
orion_clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
}
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 76778b2f520d..55d70cfe0f9e 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -39,7 +39,6 @@ config ARCH_BCM2835
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select HAVE_ARM_ARCH_TIMER
help
This enables support for the Broadcom BCM2837 and BCM2711 SoC.
These SoCs are used in the Raspberry Pi 3 and 4 devices.
@@ -301,7 +300,6 @@ config ARCH_ZX
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
- select ZYNQMP_FIRMWARE
help
This enables support for Xilinx ZynqMP Family
diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index dfb354a5ff18..e699803986e5 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -14,27 +14,8 @@
#include "pmc.h"
-#define PMC_PLL_CTRL0 0xc
-#define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0)
-#define PMC_PLL_CTRL0_ENPLL BIT(28)
-#define PMC_PLL_CTRL0_ENPLLCK BIT(29)
-#define PMC_PLL_CTRL0_ENLOCK BIT(31)
-
-#define PMC_PLL_CTRL1 0x10
-#define PMC_PLL_CTRL1_FRACR_MSK GENMASK(21, 0)
-#define PMC_PLL_CTRL1_MUL_MSK GENMASK(30, 24)
-
-#define PMC_PLL_ACR 0x18
-#define PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL
-#define PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL
-#define PMC_PLL_ACR_UTMIVR BIT(12)
-#define PMC_PLL_ACR_UTMIBG BIT(13)
-#define PMC_PLL_ACR_LOOP_FILTER_MSK GENMASK(31, 24)
-
-#define PMC_PLL_UPDT 0x1c
-#define PMC_PLL_UPDT_UPDATE BIT(8)
-
-#define PMC_PLL_ISR0 0xec
+#define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0)
+#define PMC_PLL_CTRL1_MUL_MSK GENMASK(30, 24)
#define PLL_DIV_MAX (FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1)
#define UPLL_DIV 2
@@ -59,7 +40,7 @@ static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
{
unsigned int status;
- regmap_read(regmap, PMC_PLL_ISR0, &status);
+ regmap_read(regmap, AT91_PMC_PLL_ISR0, &status);
return !!(status & BIT(id));
}
@@ -74,12 +55,12 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
u32 val;
spin_lock_irqsave(pll->lock, flags);
- regmap_write(regmap, PMC_PLL_UPDT, pll->id);
+ regmap_write(regmap, AT91_PMC_PLL_UPDT, pll->id);
- regmap_read(regmap, PMC_PLL_CTRL0, &val);
+ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
- regmap_read(regmap, PMC_PLL_CTRL1, &val);
+ regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val);
if (sam9x60_pll_ready(regmap, pll->id) &&
@@ -88,39 +69,39 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
return 0;
}
- /* Recommended value for PMC_PLL_ACR */
+ /* Recommended value for AT91_PMC_PLL_ACR */
if (pll->characteristics->upll)
- val = PMC_PLL_ACR_DEFAULT_UPLL;
+ val = AT91_PMC_PLL_ACR_DEFAULT_UPLL;
else
- val = PMC_PLL_ACR_DEFAULT_PLLA;
- regmap_write(regmap, PMC_PLL_ACR, val);
+ val = AT91_PMC_PLL_ACR_DEFAULT_PLLA;
+ regmap_write(regmap, AT91_PMC_PLL_ACR, val);
- regmap_write(regmap, PMC_PLL_CTRL1,
+ regmap_write(regmap, AT91_PMC_PLL_CTRL1,
FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul));
if (pll->characteristics->upll) {
/* Enable the UTMI internal bandgap */
- val |= PMC_PLL_ACR_UTMIBG;
- regmap_write(regmap, PMC_PLL_ACR, val);
+ val |= AT91_PMC_PLL_ACR_UTMIBG;
+ regmap_write(regmap, AT91_PMC_PLL_ACR, val);
udelay(10);
/* Enable the UTMI internal regulator */
- val |= PMC_PLL_ACR_UTMIVR;
- regmap_write(regmap, PMC_PLL_ACR, val);
+ val |= AT91_PMC_PLL_ACR_UTMIVR;
+ regmap_write(regmap, AT91_PMC_PLL_ACR, val);
udelay(10);
}
- regmap_update_bits(regmap, PMC_PLL_UPDT,
- PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+ AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
- regmap_write(regmap, PMC_PLL_CTRL0,
- PMC_PLL_CTRL0_ENLOCK | PMC_PLL_CTRL0_ENPLL |
- PMC_PLL_CTRL0_ENPLLCK | pll->div);
+ regmap_write(regmap, AT91_PMC_PLL_CTRL0,
+ AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL |
+ AT91_PMC_PLL_CTRL0_ENPLLCK | pll->div);
- regmap_update_bits(regmap, PMC_PLL_UPDT,
- PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+ AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
while (!sam9x60_pll_ready(regmap, pll->id))
cpu_relax();
@@ -144,22 +125,24 @@ static void sam9x60_pll_unprepare(struct clk_hw *hw)
spin_lock_irqsave(pll->lock, flags);
- regmap_write(pll->regmap, PMC_PLL_UPDT, pll->id);
+ regmap_write(pll->regmap, AT91_PMC_PLL_UPDT, pll->id);
- regmap_update_bits(pll->regmap, PMC_PLL_CTRL0,
- PMC_PLL_CTRL0_ENPLLCK, 0);
+ regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
+ AT91_PMC_PLL_CTRL0_ENPLLCK, 0);
- regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
- PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+ regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
+ AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
- regmap_update_bits(pll->regmap, PMC_PLL_CTRL0, PMC_PLL_CTRL0_ENPLL, 0);
+ regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
+ AT91_PMC_PLL_CTRL0_ENPLL, 0);
if (pll->characteristics->upll)
- regmap_update_bits(pll->regmap, PMC_PLL_ACR,
- PMC_PLL_ACR_UTMIBG | PMC_PLL_ACR_UTMIVR, 0);
+ regmap_update_bits(pll->regmap, AT91_PMC_PLL_ACR,
+ AT91_PMC_PLL_ACR_UTMIBG |
+ AT91_PMC_PLL_ACR_UTMIVR, 0);
- regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
- PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+ regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
+ AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
spin_unlock_irqrestore(pll->lock, flags);
}
@@ -316,10 +299,10 @@ sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock,
pll->regmap = regmap;
pll->lock = lock;
- regmap_write(regmap, PMC_PLL_UPDT, id);
- regmap_read(regmap, PMC_PLL_CTRL0, &pllr);
+ regmap_write(regmap, AT91_PMC_PLL_UPDT, id);
+ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &pllr);
pll->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, pllr);
- regmap_read(regmap, PMC_PLL_CTRL1, &pllr);
+ regmap_read(regmap, AT91_PMC_PLL_CTRL1, &pllr);
pll->mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, pllr);
hw = &pll->hw;
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 62272ecfa771..99a2d72ac02b 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -86,3 +86,11 @@ config ARM_MVEBU_V7_CPUIDLE
depends on (ARCH_MVEBU || COMPILE_TEST) && !ARM64
help
Select this to enable cpuidle on Armada 370, 38x and XP processors.
+
+config ARM_TEGRA_CPUIDLE
+ bool "CPU Idle Driver for NVIDIA Tegra SoCs"
+ depends on ARCH_TEGRA && !ARM64
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+ select ARM_CPU_SUSPEND
+ help
+ Select this to enable cpuidle for NVIDIA Tegra20/30/114/124 SoCs.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index cc8c769d7fa9..55a464f6a78b 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_ARM_CPUIDLE) += cpuidle-arm.o
obj-$(CONFIG_ARM_PSCI_CPUIDLE) += cpuidle_psci.o
cpuidle_psci-y := cpuidle-psci.o
cpuidle_psci-$(CONFIG_PM_GENERIC_DOMAINS_OF) += cpuidle-psci-domain.o
+obj-$(CONFIG_ARM_TEGRA_CPUIDLE) += cpuidle-tegra.o
###############################################################################
# MIPS drivers
diff --git a/drivers/cpuidle/cpuidle-tegra.c b/drivers/cpuidle/cpuidle-tegra.c
new file mode 100644
index 000000000000..313b0290e97b
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-tegra.c
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CPU idle driver for Tegra CPUs
+ *
+ * Copyright (c) 2010-2013, NVIDIA Corporation.
+ * Copyright (c) 2011 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ * Gary King <gking@nvidia.com>
+ *
+ * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
+ *
+ * Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com>
+ */
+
+#define pr_fmt(fmt) "tegra-cpuidle: " fmt
+
+#include <linux/atomic.h>
+#include <linux/cpuidle.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/clk/tegra.h>
+#include <linux/firmware/trusted_foundations.h>
+
+#include <soc/tegra/cpuidle.h>
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/irq.h>
+#include <soc/tegra/pm.h>
+#include <soc/tegra/pmc.h>
+
+#include <asm/cpuidle.h>
+#include <asm/firmware.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+enum tegra_state {
+ TEGRA_C1,
+ TEGRA_C7,
+ TEGRA_CC6,
+ TEGRA_STATE_COUNT,
+};
+
+static atomic_t tegra_idle_barrier;
+static atomic_t tegra_abort_flag;
+
+static inline bool tegra_cpuidle_using_firmware(void)
+{
+ return firmware_ops->prepare_idle && firmware_ops->do_idle;
+}
+
+static void tegra_cpuidle_report_cpus_state(void)
+{
+ unsigned long cpu, lcpu, csr;
+
+ for_each_cpu(lcpu, cpu_possible_mask) {
+ cpu = cpu_logical_map(lcpu);
+ csr = flowctrl_read_cpu_csr(cpu);
+
+ pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n",
+ cpu, cpu_online(lcpu), csr);
+ }
+}
+
+static int tegra_cpuidle_wait_for_secondary_cpus_parking(void)
+{
+ unsigned int retries = 3;
+
+ while (retries--) {
+ unsigned int delay_us = 10;
+ unsigned int timeout_us = 500 * 1000 / delay_us;
+
+ /*
+ * The primary CPU0 core shall wait for the secondaries
+ * shutdown in order to power-off CPU's cluster safely.
+ * The timeout value depends on the current CPU frequency,
+ * it takes about 40-150us in average and over 1000us in
+ * a worst case scenario.
+ */
+ do {
+ if (tegra_cpu_rail_off_ready())
+ return 0;
+
+ udelay(delay_us);
+
+ } while (timeout_us--);
+
+ pr_err("secondary CPU taking too long to park\n");
+
+ tegra_cpuidle_report_cpus_state();
+ }
+
+ pr_err("timed out waiting secondaries to park\n");
+
+ return -ETIMEDOUT;
+}
+
+static void tegra_cpuidle_unpark_secondary_cpus(void)
+{
+ unsigned int cpu, lcpu;
+
+ for_each_cpu(lcpu, cpu_online_mask) {
+ cpu = cpu_logical_map(lcpu);
+
+ if (cpu > 0) {
+ tegra_enable_cpu_clock(cpu);
+ tegra_cpu_out_of_reset(cpu);
+ flowctrl_write_cpu_halt(cpu, 0);
+ }
+ }
+}
+
+static int tegra_cpuidle_cc6_enter(unsigned int cpu)
+{
+ int ret;
+
+ if (cpu > 0) {
+ ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu);
+ } else {
+ ret = tegra_cpuidle_wait_for_secondary_cpus_parking();
+ if (!ret)
+ ret = tegra_pm_enter_lp2();
+
+ tegra_cpuidle_unpark_secondary_cpus();
+ }
+
+ return ret;
+}
+
+static int tegra_cpuidle_c7_enter(void)
+{
+ int err;
+
+ if (tegra_cpuidle_using_firmware()) {
+ err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
+ if (err)
+ return err;
+
+ return call_firmware_op(do_idle, 0);
+ }
+
+ return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend);
+}
+
+static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev)
+{
+ if (tegra_pending_sgi()) {
+ /*
+ * CPU got local interrupt that will be lost after GIC's
+ * shutdown because GIC driver doesn't save/restore the
+ * pending SGI state across CPU cluster PM. Abort and retry
+ * next time.
+ */
+ atomic_set(&tegra_abort_flag, 1);
+ }
+
+ cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
+
+ if (atomic_read(&tegra_abort_flag)) {
+ cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
+ atomic_set(&tegra_abort_flag, 0);
+ return -EINTR;
+ }
+
+ return 0;
+}
+
+static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
+ int index, unsigned int cpu)
+{
+ int ret;
+
+ /*
+ * CC6 state is the "CPU cluster power-off" state. In order to
+ * enter this state, at first the secondary CPU cores need to be
+ * parked into offline mode, then the last CPU should clean out
+ * remaining dirty cache lines into DRAM and trigger Flow Controller
+ * logic that turns off the cluster's power domain (which includes
+ * CPU cores, GIC and L2 cache).
+ */
+ if (index == TEGRA_CC6) {
+ ret = tegra_cpuidle_coupled_barrier(dev);
+ if (ret)
+ return ret;
+ }
+
+ local_fiq_disable();
+ tegra_pm_set_cpu_in_lp2();
+ cpu_pm_enter();
+
+ switch (index) {
+ case TEGRA_C7:
+ ret = tegra_cpuidle_c7_enter();
+ break;
+
+ case TEGRA_CC6:
+ ret = tegra_cpuidle_cc6_enter(cpu);
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ cpu_pm_exit();
+ tegra_pm_clear_cpu_in_lp2();
+ local_fiq_enable();
+
+ return ret;
+}
+
+static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu)
+{
+ /*
+ * On Tegra30 CPU0 can't be power-gated separately from secondary
+ * cores because it gates the whole CPU cluster.
+ */
+ if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30)
+ return index;
+
+ /* put CPU0 into C1 if C7 is requested and secondaries are online */
+ if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1)
+ index = TEGRA_C1;
+ else
+ index = TEGRA_CC6;
+
+ return index;
+}
+
+static int tegra_cpuidle_enter(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned int cpu = cpu_logical_map(dev->cpu);
+ int err;
+
+ index = tegra_cpuidle_adjust_state_index(index, cpu);
+ if (dev->states_usage[index].disable)
+ return -1;
+
+ if (index == TEGRA_C1)
+ err = arm_cpuidle_simple_enter(dev, drv, index);
+ else
+ err = tegra_cpuidle_state_enter(dev, index, cpu);
+
+ if (err && (err != -EINTR || index != TEGRA_CC6))
+ pr_err_once("failed to enter state %d err: %d\n", index, err);
+
+ return err ? -1 : index;
+}
+
+static void tegra114_enter_s2idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ tegra_cpuidle_enter(dev, drv, index);
+}
+
+/*
+ * The previous versions of Tegra CPUIDLE driver used a different "legacy"
+ * terminology for naming of the idling states, while this driver uses the
+ * new terminology.
+ *
+ * Mapping of the old terms into the new ones:
+ *
+ * Old | New
+ * ---------
+ * LP3 | C1 (CPU core clock gating)
+ * LP2 | C7 (CPU core power gating)
+ * LP2 | CC6 (CPU cluster power gating)
+ *
+ * Note that that the older CPUIDLE driver versions didn't explicitly
+ * differentiate the LP2 states because these states either used the same
+ * code path or because CC6 wasn't supported.
+ */
+static struct cpuidle_driver tegra_idle_driver = {
+ .name = "tegra_idle",
+ .states = {
+ [TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600),
+ [TEGRA_C7] = {
+ .enter = tegra_cpuidle_enter,
+ .exit_latency = 2000,
+ .target_residency = 2200,
+ .power_usage = 100,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
+ .name = "C7",
+ .desc = "CPU core powered off",
+ },
+ [TEGRA_CC6] = {
+ .enter = tegra_cpuidle_enter,
+ .exit_latency = 5000,
+ .target_residency = 10000,
+ .power_usage = 0,
+ .flags = CPUIDLE_FLAG_TIMER_STOP |
+ CPUIDLE_FLAG_COUPLED,
+ .name = "CC6",
+ .desc = "CPU cluster powered off",
+ },
+ },
+ .state_count = TEGRA_STATE_COUNT,
+ .safe_state_index = TEGRA_C1,
+};
+
+static inline void tegra_cpuidle_disable_state(enum tegra_state state)
+{
+ cpuidle_driver_state_disabled(&tegra_idle_driver, state, true);
+}
+
+/*
+ * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
+ * they are legacy IRQs or MSI, are lost when CC6 is enabled. To work around
+ * this, simply disable CC6 if the PCI driver and DT node are both enabled.
+ */
+void tegra_cpuidle_pcie_irqs_in_use(void)
+{
+ struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6];
+
+ if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) ||
+ tegra_get_chip_id() != TEGRA20)
+ return;
+
+ pr_info("disabling CC6 state, since PCIe IRQs are in use\n");
+ tegra_cpuidle_disable_state(TEGRA_CC6);
+}
+
+static void tegra_cpuidle_setup_tegra114_c7_state(void)
+{
+ struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7];
+
+ s->enter_s2idle = tegra114_enter_s2idle;
+ s->target_residency = 1000;
+ s->exit_latency = 500;
+}
+
+static int tegra_cpuidle_probe(struct platform_device *pdev)
+{
+ /* LP2 could be disabled in device-tree */
+ if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2)
+ tegra_cpuidle_disable_state(TEGRA_CC6);
+
+ /*
+ * Required suspend-resume functionality, which is provided by the
+ * Tegra-arch core and PMC driver, is unavailable if PM-sleep option
+ * is disabled.
+ */
+ if (!IS_ENABLED(CONFIG_PM_SLEEP)) {
+ if (!tegra_cpuidle_using_firmware())
+ tegra_cpuidle_disable_state(TEGRA_C7);
+
+ tegra_cpuidle_disable_state(TEGRA_CC6);
+ }
+
+ /*
+ * Generic WFI state (also known as C1 or LP3) and the coupled CPU
+ * cluster power-off (CC6 or LP2) states are common for all Tegra SoCs.
+ */
+ switch (tegra_get_chip_id()) {
+ case TEGRA20:
+ /* Tegra20 isn't capable to power-off individual CPU cores */
+ tegra_cpuidle_disable_state(TEGRA_C7);
+ break;
+
+ case TEGRA30:
+ tegra_cpuidle_disable_state(TEGRA_CC6);
+ break;
+
+ case TEGRA114:
+ case TEGRA124:
+ tegra_cpuidle_setup_tegra114_c7_state();
+
+ /* coupled CC6 (LP2) state isn't implemented yet */
+ tegra_cpuidle_disable_state(TEGRA_CC6);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
+}
+
+static struct platform_driver tegra_cpuidle_driver = {
+ .probe = tegra_cpuidle_probe,
+ .driver = {
+ .name = "tegra-cpuidle",
+ },
+};
+builtin_platform_driver(tegra_cpuidle_driver);
diff --git a/drivers/firmware/xilinx/Kconfig b/drivers/firmware/xilinx/Kconfig
index bd33bbf70daf..9a9bd190888e 100644
--- a/drivers/firmware/xilinx/Kconfig
+++ b/drivers/firmware/xilinx/Kconfig
@@ -6,6 +6,8 @@ menu "Zynq MPSoC Firmware Drivers"
config ZYNQMP_FIRMWARE
bool "Enable Xilinx Zynq MPSoC firmware interface"
+ depends on ARCH_ZYNQMP
+ default y if ARCH_ZYNQMP
select MFD_CORE
help
Firmware interface driver is used by different
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index de20e6cba83b..db37144ae98c 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -78,6 +78,7 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index, u32 timeout)
client->pkt_cnt = 0;
client->client.dev = dev;
client->client.tx_block = false;
+ client->client.knows_txdone = true;
client->chan = mbox_request_channel(&client->client, index);
if (IS_ERR(client->chan)) {
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index c725315cf6a8..5d34e8b9c988 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -111,6 +111,28 @@ enum dew_regs {
PWRAP_RG_SPI_CON13,
PWRAP_SPISLV_KEY,
+ /* MT6359 only regs */
+ PWRAP_DEW_CRC_SWRST,
+ PWRAP_DEW_RG_EN_RECORD,
+ PWRAP_DEW_RECORD_CMD0,
+ PWRAP_DEW_RECORD_CMD1,
+ PWRAP_DEW_RECORD_CMD2,
+ PWRAP_DEW_RECORD_CMD3,
+ PWRAP_DEW_RECORD_CMD4,
+ PWRAP_DEW_RECORD_CMD5,
+ PWRAP_DEW_RECORD_WDATA0,
+ PWRAP_DEW_RECORD_WDATA1,
+ PWRAP_DEW_RECORD_WDATA2,
+ PWRAP_DEW_RECORD_WDATA3,
+ PWRAP_DEW_RECORD_WDATA4,
+ PWRAP_DEW_RECORD_WDATA5,
+ PWRAP_DEW_RG_ADDR_TARGET,
+ PWRAP_DEW_RG_ADDR_MASK,
+ PWRAP_DEW_RG_WDATA_TARGET,
+ PWRAP_DEW_RG_WDATA_MASK,
+ PWRAP_DEW_RG_SPI_RECORD_CLR,
+ PWRAP_DEW_RG_CMD_ALERT_CLR,
+
/* MT6397 only regs */
PWRAP_DEW_EVENT_OUT_EN,
PWRAP_DEW_EVENT_SRC_EN,
@@ -197,6 +219,42 @@ static const u32 mt6358_regs[] = {
[PWRAP_SPISLV_KEY] = 0x044a,
};
+static const u32 mt6359_regs[] = {
+ [PWRAP_DEW_RG_EN_RECORD] = 0x040a,
+ [PWRAP_DEW_DIO_EN] = 0x040c,
+ [PWRAP_DEW_READ_TEST] = 0x040e,
+ [PWRAP_DEW_WRITE_TEST] = 0x0410,
+ [PWRAP_DEW_CRC_SWRST] = 0x0412,
+ [PWRAP_DEW_CRC_EN] = 0x0414,
+ [PWRAP_DEW_CRC_VAL] = 0x0416,
+ [PWRAP_DEW_CIPHER_KEY_SEL] = 0x0418,
+ [PWRAP_DEW_CIPHER_IV_SEL] = 0x041a,
+ [PWRAP_DEW_CIPHER_EN] = 0x041c,
+ [PWRAP_DEW_CIPHER_RDY] = 0x041e,
+ [PWRAP_DEW_CIPHER_MODE] = 0x0420,
+ [PWRAP_DEW_CIPHER_SWRST] = 0x0422,
+ [PWRAP_DEW_RDDMY_NO] = 0x0424,
+ [PWRAP_DEW_RECORD_CMD0] = 0x0428,
+ [PWRAP_DEW_RECORD_CMD1] = 0x042a,
+ [PWRAP_DEW_RECORD_CMD2] = 0x042c,
+ [PWRAP_DEW_RECORD_CMD3] = 0x042e,
+ [PWRAP_DEW_RECORD_CMD4] = 0x0430,
+ [PWRAP_DEW_RECORD_CMD5] = 0x0432,
+ [PWRAP_DEW_RECORD_WDATA0] = 0x0434,
+ [PWRAP_DEW_RECORD_WDATA1] = 0x0436,
+ [PWRAP_DEW_RECORD_WDATA2] = 0x0438,
+ [PWRAP_DEW_RECORD_WDATA3] = 0x043a,
+ [PWRAP_DEW_RECORD_WDATA4] = 0x043c,
+ [PWRAP_DEW_RECORD_WDATA5] = 0x043e,
+ [PWRAP_DEW_RG_ADDR_TARGET] = 0x0440,
+ [PWRAP_DEW_RG_ADDR_MASK] = 0x0442,
+ [PWRAP_DEW_RG_WDATA_TARGET] = 0x0444,
+ [PWRAP_DEW_RG_WDATA_MASK] = 0x0446,
+ [PWRAP_DEW_RG_SPI_RECORD_CLR] = 0x0448,
+ [PWRAP_DEW_RG_CMD_ALERT_CLR] = 0x0448,
+ [PWRAP_SPISLV_KEY] = 0x044a,
+};
+
static const u32 mt6397_regs[] = {
[PWRAP_DEW_BASE] = 0xbc00,
[PWRAP_DEW_EVENT_OUT_EN] = 0xbc00,
@@ -497,6 +555,45 @@ static int mt6765_regs[] = {
[PWRAP_DCM_DBC_PRD] = 0x1E0,
};
+static int mt6779_regs[] = {
+ [PWRAP_MUX_SEL] = 0x0,
+ [PWRAP_WRAP_EN] = 0x4,
+ [PWRAP_DIO_EN] = 0x8,
+ [PWRAP_RDDMY] = 0x20,
+ [PWRAP_CSHEXT_WRITE] = 0x24,
+ [PWRAP_CSHEXT_READ] = 0x28,
+ [PWRAP_CSLEXT_WRITE] = 0x2C,
+ [PWRAP_CSLEXT_READ] = 0x30,
+ [PWRAP_EXT_CK_WRITE] = 0x34,
+ [PWRAP_STAUPD_CTRL] = 0x3C,
+ [PWRAP_STAUPD_GRPEN] = 0x40,
+ [PWRAP_EINT_STA0_ADR] = 0x44,
+ [PWRAP_HARB_HPRIO] = 0x68,
+ [PWRAP_HIPRIO_ARB_EN] = 0x6C,
+ [PWRAP_MAN_EN] = 0x7C,
+ [PWRAP_MAN_CMD] = 0x80,
+ [PWRAP_WACS0_EN] = 0x8C,
+ [PWRAP_INIT_DONE0] = 0x90,
+ [PWRAP_WACS1_EN] = 0x94,
+ [PWRAP_WACS2_EN] = 0x9C,
+ [PWRAP_INIT_DONE1] = 0x98,
+ [PWRAP_INIT_DONE2] = 0xA0,
+ [PWRAP_INT_EN] = 0xBC,
+ [PWRAP_INT_FLG_RAW] = 0xC0,
+ [PWRAP_INT_FLG] = 0xC4,
+ [PWRAP_INT_CLR] = 0xC8,
+ [PWRAP_INT1_EN] = 0xCC,
+ [PWRAP_INT1_FLG] = 0xD4,
+ [PWRAP_INT1_CLR] = 0xD8,
+ [PWRAP_TIMER_EN] = 0xF0,
+ [PWRAP_WDT_UNIT] = 0xF8,
+ [PWRAP_WDT_SRC_EN] = 0xFC,
+ [PWRAP_WDT_SRC_EN_1] = 0x100,
+ [PWRAP_WACS2_CMD] = 0xC20,
+ [PWRAP_WACS2_RDATA] = 0xC24,
+ [PWRAP_WACS2_VLDCLR] = 0xC28,
+};
+
static int mt6797_regs[] = {
[PWRAP_MUX_SEL] = 0x0,
[PWRAP_WRAP_EN] = 0x4,
@@ -938,6 +1035,7 @@ enum pmic_type {
PMIC_MT6351,
PMIC_MT6357,
PMIC_MT6358,
+ PMIC_MT6359,
PMIC_MT6380,
PMIC_MT6397,
};
@@ -945,6 +1043,7 @@ enum pmic_type {
enum pwrap_type {
PWRAP_MT2701,
PWRAP_MT6765,
+ PWRAP_MT6779,
PWRAP_MT6797,
PWRAP_MT7622,
PWRAP_MT8135,
@@ -1377,6 +1476,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
break;
case PWRAP_MT2701:
case PWRAP_MT6765:
+ case PWRAP_MT6779:
case PWRAP_MT6797:
case PWRAP_MT8173:
case PWRAP_MT8516:
@@ -1711,6 +1811,15 @@ static const struct pwrap_slv_type pmic_mt6358 = {
.pwrap_write = pwrap_write16,
};
+static const struct pwrap_slv_type pmic_mt6359 = {
+ .dew_regs = mt6359_regs,
+ .type = PMIC_MT6359,
+ .regmap = &pwrap_regmap_config16,
+ .caps = PWRAP_SLV_CAP_DUALIO,
+ .pwrap_read = pwrap_read16,
+ .pwrap_write = pwrap_write16,
+};
+
static const struct pwrap_slv_type pmic_mt6380 = {
.dew_regs = NULL,
.type = PMIC_MT6380,
@@ -1744,6 +1853,9 @@ static const struct of_device_id of_slave_match_tbl[] = {
.compatible = "mediatek,mt6358",
.data = &pmic_mt6358,
}, {
+ .compatible = "mediatek,mt6359",
+ .data = &pmic_mt6359,
+ }, {
/* The MT6380 PMIC only implements a regulator, so we bind it
* directly instead of using a MFD.
*/
@@ -1783,6 +1895,19 @@ static const struct pmic_wrapper_type pwrap_mt6765 = {
.init_soc_specific = NULL,
};
+static const struct pmic_wrapper_type pwrap_mt6779 = {
+ .regs = mt6779_regs,
+ .type = PWRAP_MT6779,
+ .arb_en_all = 0xfbb7f,
+ .int_en_all = 0xfffffffe,
+ .int1_en_all = 0,
+ .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+ .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
+ .caps = 0,
+ .init_reg_clock = pwrap_common_init_reg_clock,
+ .init_soc_specific = NULL,
+};
+
static const struct pmic_wrapper_type pwrap_mt6797 = {
.regs = mt6797_regs,
.type = PWRAP_MT6797,
@@ -1868,6 +1993,9 @@ static const struct of_device_id of_pwrap_match_tbl[] = {
.compatible = "mediatek,mt6765-pwrap",
.data = &pwrap_mt6765,
}, {
+ .compatible = "mediatek,mt6779-pwrap",
+ .data = &pwrap_mt6779,
+ }, {
.compatible = "mediatek,mt6797-pwrap",
.data = &pwrap_mt6797,
}, {
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index ba2b8b51d2d9..de5cfe3fddd3 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -116,6 +116,7 @@ config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
select ARM_ERRATA_754322
+ select ARM_GLOBAL_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select SYSC_R8A7779
@@ -163,6 +164,7 @@ config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
select ARM_ERRATA_754322
+ select ARM_GLOBAL_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select RENESAS_INTC_IRQPIN
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 1699dda6b393..1c533a969f54 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -3,7 +3,7 @@
* drivers/soc/tegra/pmc.c
*
* Copyright (c) 2010 Google, Inc
- * Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2018-2020, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@google.com>
@@ -13,9 +13,13 @@
#include <linux/arm-smccc.h>
#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/clk-conf.h>
#include <linux/clk/tegra.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/init.h>
@@ -48,6 +52,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/gpio/tegra194-gpio.h>
+#include <dt-bindings/soc/tegra-pmc.h>
#define PMC_CNTRL 0x0
#define PMC_CNTRL_INTR_POLARITY BIT(17) /* inverts INTR polarity */
@@ -57,12 +62,15 @@
#define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */
#define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */
#define PMC_CNTRL_PWRREQ_POLARITY BIT(8)
+#define PMC_CNTRL_BLINK_EN 7
#define PMC_CNTRL_MAIN_RST BIT(4)
#define PMC_WAKE_MASK 0x0c
#define PMC_WAKE_LEVEL 0x10
#define PMC_WAKE_STATUS 0x14
#define PMC_SW_WAKE_STATUS 0x18
+#define PMC_DPD_PADS_ORIDE 0x1c
+#define PMC_DPD_PADS_ORIDE_BLINK 20
#define DPD_SAMPLE 0x020
#define DPD_SAMPLE_ENABLE BIT(0)
@@ -75,6 +83,7 @@
#define PWRGATE_STATUS 0x38
+#define PMC_BLINK_TIMER 0x40
#define PMC_IMPL_E_33V_PWR 0x40
#define PMC_PWR_DET 0x48
@@ -100,6 +109,8 @@
#define PMC_WAKE2_STATUS 0x168
#define PMC_SW_WAKE2_STATUS 0x16c
+#define PMC_CLK_OUT_CNTRL 0x1a8
+#define PMC_CLK_OUT_MUX_MASK GENMASK(1, 0)
#define PMC_SENSOR_CTRL 0x1b0
#define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2)
#define PMC_SENSOR_CTRL_ENABLE_RST BIT(1)
@@ -155,6 +166,71 @@
#define TEGRA_SMC_PMC_READ 0xaa
#define TEGRA_SMC_PMC_WRITE 0xbb
+struct pmc_clk {
+ struct clk_hw hw;
+ unsigned long offs;
+ u32 mux_shift;
+ u32 force_en_shift;
+};
+
+#define to_pmc_clk(_hw) container_of(_hw, struct pmc_clk, hw)
+
+struct pmc_clk_gate {
+ struct clk_hw hw;
+ unsigned long offs;
+ u32 shift;
+};
+
+#define to_pmc_clk_gate(_hw) container_of(_hw, struct pmc_clk_gate, hw)
+
+struct pmc_clk_init_data {
+ char *name;
+ const char *const *parents;
+ int num_parents;
+ int clk_id;
+ u8 mux_shift;
+ u8 force_en_shift;
+};
+
+static const char * const clk_out1_parents[] = { "osc", "osc_div2",
+ "osc_div4", "extern1",
+};
+
+static const char * const clk_out2_parents[] = { "osc", "osc_div2",
+ "osc_div4", "extern2",
+};
+
+static const char * const clk_out3_parents[] = { "osc", "osc_div2",
+ "osc_div4", "extern3",
+};
+
+static const struct pmc_clk_init_data tegra_pmc_clks_data[] = {
+ {
+ .name = "pmc_clk_out_1",
+ .parents = clk_out1_parents,
+ .num_parents = ARRAY_SIZE(clk_out1_parents),
+ .clk_id = TEGRA_PMC_CLK_OUT_1,
+ .mux_shift = 6,
+ .force_en_shift = 2,
+ },
+ {
+ .name = "pmc_clk_out_2",
+ .parents = clk_out2_parents,
+ .num_parents = ARRAY_SIZE(clk_out2_parents),
+ .clk_id = TEGRA_PMC_CLK_OUT_2,
+ .mux_shift = 14,
+ .force_en_shift = 10,
+ },
+ {
+ .name = "pmc_clk_out_3",
+ .parents = clk_out3_parents,
+ .num_parents = ARRAY_SIZE(clk_out3_parents),
+ .clk_id = TEGRA_PMC_CLK_OUT_3,
+ .mux_shift = 22,
+ .force_en_shift = 18,
+ },
+};
+
struct tegra_powergate {
struct generic_pm_domain genpd;
struct tegra_pmc *pmc;
@@ -254,6 +330,10 @@ struct tegra_pmc_soc {
*/
const struct tegra_wake_event *wake_events;
unsigned int num_wake_events;
+
+ const struct pmc_clk_init_data *pmc_clks_data;
+ unsigned int num_pmc_clks;
+ bool has_blink_output;
};
static const char * const tegra186_reset_sources[] = {
@@ -2163,6 +2243,258 @@ static int tegra_pmc_clk_notify_cb(struct notifier_block *nb,
return NOTIFY_OK;
}
+static void pmc_clk_fence_udelay(u32 offset)
+{
+ tegra_pmc_readl(pmc, offset);
+ /* pmc clk propagation delay 2 us */
+ udelay(2);
+}
+
+static u8 pmc_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct pmc_clk *clk = to_pmc_clk(hw);
+ u32 val;
+
+ val = tegra_pmc_readl(pmc, clk->offs) >> clk->mux_shift;
+ val &= PMC_CLK_OUT_MUX_MASK;
+
+ return val;
+}
+
+static int pmc_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct pmc_clk *clk = to_pmc_clk(hw);
+ u32 val;
+
+ val = tegra_pmc_readl(pmc, clk->offs);
+ val &= ~(PMC_CLK_OUT_MUX_MASK << clk->mux_shift);
+ val |= index << clk->mux_shift;
+ tegra_pmc_writel(pmc, val, clk->offs);
+ pmc_clk_fence_udelay(clk->offs);
+
+ return 0;
+}
+
+static int pmc_clk_is_enabled(struct clk_hw *hw)
+{
+ struct pmc_clk *clk = to_pmc_clk(hw);
+ u32 val;
+
+ val = tegra_pmc_readl(pmc, clk->offs) & BIT(clk->force_en_shift);
+
+ return val ? 1 : 0;
+}
+
+static void pmc_clk_set_state(unsigned long offs, u32 shift, int state)
+{
+ u32 val;
+
+ val = tegra_pmc_readl(pmc, offs);
+ val = state ? (val | BIT(shift)) : (val & ~BIT(shift));
+ tegra_pmc_writel(pmc, val, offs);
+ pmc_clk_fence_udelay(offs);
+}
+
+static int pmc_clk_enable(struct clk_hw *hw)
+{
+ struct pmc_clk *clk = to_pmc_clk(hw);
+
+ pmc_clk_set_state(clk->offs, clk->force_en_shift, 1);
+
+ return 0;
+}
+
+static void pmc_clk_disable(struct clk_hw *hw)
+{
+ struct pmc_clk *clk = to_pmc_clk(hw);
+
+ pmc_clk_set_state(clk->offs, clk->force_en_shift, 0);
+}
+
+static const struct clk_ops pmc_clk_ops = {
+ .get_parent = pmc_clk_mux_get_parent,
+ .set_parent = pmc_clk_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+ .is_enabled = pmc_clk_is_enabled,
+ .enable = pmc_clk_enable,
+ .disable = pmc_clk_disable,
+};
+
+static struct clk *
+tegra_pmc_clk_out_register(struct tegra_pmc *pmc,
+ const struct pmc_clk_init_data *data,
+ unsigned long offset)
+{
+ struct clk_init_data init;
+ struct pmc_clk *pmc_clk;
+
+ pmc_clk = devm_kzalloc(pmc->dev, sizeof(*pmc_clk), GFP_KERNEL);
+ if (!pmc_clk)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = data->name;
+ init.ops = &pmc_clk_ops;
+ init.parent_names = data->parents;
+ init.num_parents = data->num_parents;
+ init.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT |
+ CLK_SET_PARENT_GATE;
+
+ pmc_clk->hw.init = &init;
+ pmc_clk->offs = offset;
+ pmc_clk->mux_shift = data->mux_shift;
+ pmc_clk->force_en_shift = data->force_en_shift;
+
+ return clk_register(NULL, &pmc_clk->hw);
+}
+
+static int pmc_clk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
+
+ return tegra_pmc_readl(pmc, gate->offs) & BIT(gate->shift) ? 1 : 0;
+}
+
+static int pmc_clk_gate_enable(struct clk_hw *hw)
+{
+ struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
+
+ pmc_clk_set_state(gate->offs, gate->shift, 1);
+
+ return 0;
+}
+
+static void pmc_clk_gate_disable(struct clk_hw *hw)
+{
+ struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
+
+ pmc_clk_set_state(gate->offs, gate->shift, 0);
+}
+
+static const struct clk_ops pmc_clk_gate_ops = {
+ .is_enabled = pmc_clk_gate_is_enabled,
+ .enable = pmc_clk_gate_enable,
+ .disable = pmc_clk_gate_disable,
+};
+
+static struct clk *
+tegra_pmc_clk_gate_register(struct tegra_pmc *pmc, const char *name,
+ const char *parent_name, unsigned long offset,
+ u32 shift)
+{
+ struct clk_init_data init;
+ struct pmc_clk_gate *gate;
+
+ gate = devm_kzalloc(pmc->dev, sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &pmc_clk_gate_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+
+ gate->hw.init = &init;
+ gate->offs = offset;
+ gate->shift = shift;
+
+ return clk_register(NULL, &gate->hw);
+}
+
+static void tegra_pmc_clock_register(struct tegra_pmc *pmc,
+ struct device_node *np)
+{
+ struct clk *clk;
+ struct clk_onecell_data *clk_data;
+ unsigned int num_clks;
+ int i, err;
+
+ num_clks = pmc->soc->num_pmc_clks;
+ if (pmc->soc->has_blink_output)
+ num_clks += 1;
+
+ if (!num_clks)
+ return;
+
+ clk_data = devm_kmalloc(pmc->dev, sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return;
+
+ clk_data->clks = devm_kcalloc(pmc->dev, TEGRA_PMC_CLK_MAX,
+ sizeof(*clk_data->clks), GFP_KERNEL);
+ if (!clk_data->clks)
+ return;
+
+ clk_data->clk_num = TEGRA_PMC_CLK_MAX;
+
+ for (i = 0; i < TEGRA_PMC_CLK_MAX; i++)
+ clk_data->clks[i] = ERR_PTR(-ENOENT);
+
+ for (i = 0; i < pmc->soc->num_pmc_clks; i++) {
+ const struct pmc_clk_init_data *data;
+
+ data = pmc->soc->pmc_clks_data + i;
+
+ clk = tegra_pmc_clk_out_register(pmc, data, PMC_CLK_OUT_CNTRL);
+ if (IS_ERR(clk)) {
+ dev_warn(pmc->dev, "unable to register clock %s: %d\n",
+ data->name, PTR_ERR_OR_ZERO(clk));
+ return;
+ }
+
+ err = clk_register_clkdev(clk, data->name, NULL);
+ if (err) {
+ dev_warn(pmc->dev,
+ "unable to register %s clock lookup: %d\n",
+ data->name, err);
+ return;
+ }
+
+ clk_data->clks[data->clk_id] = clk;
+ }
+
+ if (pmc->soc->has_blink_output) {
+ tegra_pmc_writel(pmc, 0x0, PMC_BLINK_TIMER);
+ clk = tegra_pmc_clk_gate_register(pmc,
+ "pmc_blink_override",
+ "clk_32k",
+ PMC_DPD_PADS_ORIDE,
+ PMC_DPD_PADS_ORIDE_BLINK);
+ if (IS_ERR(clk)) {
+ dev_warn(pmc->dev,
+ "unable to register pmc_blink_override: %d\n",
+ PTR_ERR_OR_ZERO(clk));
+ return;
+ }
+
+ clk = tegra_pmc_clk_gate_register(pmc, "pmc_blink",
+ "pmc_blink_override",
+ PMC_CNTRL,
+ PMC_CNTRL_BLINK_EN);
+ if (IS_ERR(clk)) {
+ dev_warn(pmc->dev,
+ "unable to register pmc_blink: %d\n",
+ PTR_ERR_OR_ZERO(clk));
+ return;
+ }
+
+ err = clk_register_clkdev(clk, "pmc_blink", NULL);
+ if (err) {
+ dev_warn(pmc->dev,
+ "unable to register pmc_blink lookup: %d\n",
+ err);
+ return;
+ }
+
+ clk_data->clks[TEGRA_PMC_CLK_BLINK] = clk;
+ }
+
+ err = of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+ if (err)
+ dev_warn(pmc->dev, "failed to add pmc clock provider: %d\n",
+ err);
+}
+
static int tegra_pmc_probe(struct platform_device *pdev)
{
void __iomem *base;
@@ -2281,6 +2613,7 @@ static int tegra_pmc_probe(struct platform_device *pdev)
pmc->base = base;
mutex_unlock(&pmc->powergates_lock);
+ tegra_pmc_clock_register(pmc, pdev->dev.of_node);
platform_set_drvdata(pdev, pmc);
return 0;
@@ -2422,6 +2755,9 @@ static const struct tegra_pmc_soc tegra20_pmc_soc = {
.num_reset_sources = 0,
.reset_levels = NULL,
.num_reset_levels = 0,
+ .pmc_clks_data = NULL,
+ .num_pmc_clks = 0,
+ .has_blink_output = true,
};
static const char * const tegra30_powergates[] = {
@@ -2469,6 +2805,9 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
.reset_levels = NULL,
.num_reset_levels = 0,
+ .pmc_clks_data = tegra_pmc_clks_data,
+ .num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
};
static const char * const tegra114_powergates[] = {
@@ -2520,6 +2859,9 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
.reset_levels = NULL,
.num_reset_levels = 0,
+ .pmc_clks_data = tegra_pmc_clks_data,
+ .num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
};
static const char * const tegra124_powergates[] = {
@@ -2569,38 +2911,38 @@ static const u8 tegra124_cpu_powergates[] = {
.name = (_name) \
})
-#define TEGRA124_IO_PAD_TABLE(_pad) \
- /* .id .dpd .voltage .name */ \
- _pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
- _pad(TEGRA_IO_PAD_BB, 15, UINT_MAX, "bb"), \
- _pad(TEGRA_IO_PAD_CAM, 36, UINT_MAX, "cam"), \
- _pad(TEGRA_IO_PAD_COMP, 22, UINT_MAX, "comp"), \
- _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
- _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csb"), \
- _pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "cse"), \
- _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
- _pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
- _pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
- _pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
- _pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
- _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
- _pad(TEGRA_IO_PAD_HV, 38, UINT_MAX, "hv"), \
- _pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
- _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
- _pad(TEGRA_IO_PAD_NAND, 13, UINT_MAX, "nand"), \
- _pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
- _pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
- _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
- _pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
- _pad(TEGRA_IO_PAD_SDMMC1, 33, UINT_MAX, "sdmmc1"), \
- _pad(TEGRA_IO_PAD_SDMMC3, 34, UINT_MAX, "sdmmc3"), \
- _pad(TEGRA_IO_PAD_SDMMC4, 35, UINT_MAX, "sdmmc4"), \
- _pad(TEGRA_IO_PAD_SYS_DDC, 58, UINT_MAX, "sys_ddc"), \
- _pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
- _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
- _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
- _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
- _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb_bias")
+#define TEGRA124_IO_PAD_TABLE(_pad) \
+ /* .id .dpd .voltage .name */ \
+ _pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
+ _pad(TEGRA_IO_PAD_BB, 15, UINT_MAX, "bb"), \
+ _pad(TEGRA_IO_PAD_CAM, 36, UINT_MAX, "cam"), \
+ _pad(TEGRA_IO_PAD_COMP, 22, UINT_MAX, "comp"), \
+ _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
+ _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csb"), \
+ _pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "cse"), \
+ _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
+ _pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
+ _pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
+ _pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
+ _pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
+ _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
+ _pad(TEGRA_IO_PAD_HV, 38, UINT_MAX, "hv"), \
+ _pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
+ _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
+ _pad(TEGRA_IO_PAD_NAND, 13, UINT_MAX, "nand"), \
+ _pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
+ _pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
+ _pad(TEGRA_IO_PAD_SDMMC1, 33, UINT_MAX, "sdmmc1"), \
+ _pad(TEGRA_IO_PAD_SDMMC3, 34, UINT_MAX, "sdmmc3"), \
+ _pad(TEGRA_IO_PAD_SDMMC4, 35, UINT_MAX, "sdmmc4"), \
+ _pad(TEGRA_IO_PAD_SYS_DDC, 58, UINT_MAX, "sys_ddc"), \
+ _pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
+ _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
+ _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
+ _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
+ _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb_bias")
static const struct tegra_io_pad_soc tegra124_io_pads[] = {
TEGRA124_IO_PAD_TABLE(TEGRA_IO_PAD)
@@ -2631,6 +2973,9 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
.reset_levels = NULL,
.num_reset_levels = 0,
+ .pmc_clks_data = tegra_pmc_clks_data,
+ .num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
};
static const char * const tegra210_powergates[] = {
@@ -2667,46 +3012,46 @@ static const u8 tegra210_cpu_powergates[] = {
TEGRA_POWERGATE_CPU3,
};
-#define TEGRA210_IO_PAD_TABLE(_pad) \
- /* .id .dpd .voltage .name */ \
- _pad(TEGRA_IO_PAD_AUDIO, 17, 5, "audio"), \
- _pad(TEGRA_IO_PAD_AUDIO_HV, 61, 18, "audio-hv"), \
- _pad(TEGRA_IO_PAD_CAM, 36, 10, "cam"), \
- _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
- _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
- _pad(TEGRA_IO_PAD_CSIC, 42, UINT_MAX, "csic"), \
- _pad(TEGRA_IO_PAD_CSID, 43, UINT_MAX, "csid"), \
- _pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "csie"), \
- _pad(TEGRA_IO_PAD_CSIF, 45, UINT_MAX, "csif"), \
- _pad(TEGRA_IO_PAD_DBG, 25, 19, "dbg"), \
- _pad(TEGRA_IO_PAD_DEBUG_NONAO, 26, UINT_MAX, "debug-nonao"), \
- _pad(TEGRA_IO_PAD_DMIC, 50, 20, "dmic"), \
- _pad(TEGRA_IO_PAD_DP, 51, UINT_MAX, "dp"), \
- _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
- _pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
- _pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
- _pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
- _pad(TEGRA_IO_PAD_EMMC, 35, UINT_MAX, "emmc"), \
- _pad(TEGRA_IO_PAD_EMMC2, 37, UINT_MAX, "emmc2"), \
- _pad(TEGRA_IO_PAD_GPIO, 27, 21, "gpio"), \
- _pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
- _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
- _pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
- _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
- _pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
- _pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
- _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
- _pad(TEGRA_IO_PAD_PEX_CNTRL, UINT_MAX, 11, "pex-cntrl"), \
- _pad(TEGRA_IO_PAD_SDMMC1, 33, 12, "sdmmc1"), \
- _pad(TEGRA_IO_PAD_SDMMC3, 34, 13, "sdmmc3"), \
- _pad(TEGRA_IO_PAD_SPI, 46, 22, "spi"), \
- _pad(TEGRA_IO_PAD_SPI_HV, 47, 23, "spi-hv"), \
- _pad(TEGRA_IO_PAD_UART, 14, 2, "uart"), \
- _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
- _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
- _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
- _pad(TEGRA_IO_PAD_USB3, 18, UINT_MAX, "usb3"), \
- _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias")
+#define TEGRA210_IO_PAD_TABLE(_pad) \
+ /* .id .dpd .voltage .name */ \
+ _pad(TEGRA_IO_PAD_AUDIO, 17, 5, "audio"), \
+ _pad(TEGRA_IO_PAD_AUDIO_HV, 61, 18, "audio-hv"), \
+ _pad(TEGRA_IO_PAD_CAM, 36, 10, "cam"), \
+ _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
+ _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
+ _pad(TEGRA_IO_PAD_CSIC, 42, UINT_MAX, "csic"), \
+ _pad(TEGRA_IO_PAD_CSID, 43, UINT_MAX, "csid"), \
+ _pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "csie"), \
+ _pad(TEGRA_IO_PAD_CSIF, 45, UINT_MAX, "csif"), \
+ _pad(TEGRA_IO_PAD_DBG, 25, 19, "dbg"), \
+ _pad(TEGRA_IO_PAD_DEBUG_NONAO, 26, UINT_MAX, "debug-nonao"), \
+ _pad(TEGRA_IO_PAD_DMIC, 50, 20, "dmic"), \
+ _pad(TEGRA_IO_PAD_DP, 51, UINT_MAX, "dp"), \
+ _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
+ _pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
+ _pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
+ _pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
+ _pad(TEGRA_IO_PAD_EMMC, 35, UINT_MAX, "emmc"), \
+ _pad(TEGRA_IO_PAD_EMMC2, 37, UINT_MAX, "emmc2"), \
+ _pad(TEGRA_IO_PAD_GPIO, 27, 21, "gpio"), \
+ _pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
+ _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
+ _pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
+ _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
+ _pad(TEGRA_IO_PAD_PEX_CNTRL, UINT_MAX, 11, "pex-cntrl"), \
+ _pad(TEGRA_IO_PAD_SDMMC1, 33, 12, "sdmmc1"), \
+ _pad(TEGRA_IO_PAD_SDMMC3, 34, 13, "sdmmc3"), \
+ _pad(TEGRA_IO_PAD_SPI, 46, 22, "spi"), \
+ _pad(TEGRA_IO_PAD_SPI_HV, 47, 23, "spi-hv"), \
+ _pad(TEGRA_IO_PAD_UART, 14, 2, "uart"), \
+ _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
+ _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
+ _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
+ _pad(TEGRA_IO_PAD_USB3, 18, UINT_MAX, "usb3"), \
+ _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias")
static const struct tegra_io_pad_soc tegra210_io_pads[] = {
TEGRA210_IO_PAD_TABLE(TEGRA_IO_PAD)
@@ -2745,48 +3090,51 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
.num_reset_levels = 0,
.num_wake_events = ARRAY_SIZE(tegra210_wake_events),
.wake_events = tegra210_wake_events,
+ .pmc_clks_data = tegra_pmc_clks_data,
+ .num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
};
-#define TEGRA186_IO_PAD_TABLE(_pad) \
- /* .id .dpd .voltage .name */ \
- _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
- _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
- _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
- _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
- _pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4, UINT_MAX, "pex-clk-bias"), \
- _pad(TEGRA_IO_PAD_PEX_CLK3, 5, UINT_MAX, "pex-clk3"), \
- _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
- _pad(TEGRA_IO_PAD_PEX_CLK1, 7, UINT_MAX, "pex-clk1"), \
- _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
- _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
- _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
- _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias"), \
- _pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
- _pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
- _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
- _pad(TEGRA_IO_PAD_DBG, 25, UINT_MAX, "dbg"), \
- _pad(TEGRA_IO_PAD_HDMI_DP0, 28, UINT_MAX, "hdmi-dp0"), \
- _pad(TEGRA_IO_PAD_HDMI_DP1, 29, UINT_MAX, "hdmi-dp1"), \
- _pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
- _pad(TEGRA_IO_PAD_SDMMC2_HV, 34, 5, "sdmmc2-hv"), \
- _pad(TEGRA_IO_PAD_SDMMC4, 36, UINT_MAX, "sdmmc4"), \
- _pad(TEGRA_IO_PAD_CAM, 38, UINT_MAX, "cam"), \
- _pad(TEGRA_IO_PAD_DSIB, 40, UINT_MAX, "dsib"), \
- _pad(TEGRA_IO_PAD_DSIC, 41, UINT_MAX, "dsic"), \
- _pad(TEGRA_IO_PAD_DSID, 42, UINT_MAX, "dsid"), \
- _pad(TEGRA_IO_PAD_CSIC, 43, UINT_MAX, "csic"), \
- _pad(TEGRA_IO_PAD_CSID, 44, UINT_MAX, "csid"), \
- _pad(TEGRA_IO_PAD_CSIE, 45, UINT_MAX, "csie"), \
- _pad(TEGRA_IO_PAD_CSIF, 46, UINT_MAX, "csif"), \
- _pad(TEGRA_IO_PAD_SPI, 47, UINT_MAX, "spi"), \
- _pad(TEGRA_IO_PAD_UFS, 49, UINT_MAX, "ufs"), \
- _pad(TEGRA_IO_PAD_DMIC_HV, 52, 2, "dmic-hv"), \
- _pad(TEGRA_IO_PAD_EDP, 53, UINT_MAX, "edp"), \
- _pad(TEGRA_IO_PAD_SDMMC1_HV, 55, 4, "sdmmc1-hv"), \
- _pad(TEGRA_IO_PAD_SDMMC3_HV, 56, 6, "sdmmc3-hv"), \
- _pad(TEGRA_IO_PAD_CONN, 60, UINT_MAX, "conn"), \
- _pad(TEGRA_IO_PAD_AUDIO_HV, 61, 1, "audio-hv"), \
- _pad(TEGRA_IO_PAD_AO_HV, UINT_MAX, 0, "ao-hv")
+#define TEGRA186_IO_PAD_TABLE(_pad) \
+ /* .id .dpd .voltage .name */ \
+ _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
+ _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
+ _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
+ _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4, UINT_MAX, "pex-clk-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK3, 5, UINT_MAX, "pex-clk3"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK1, 7, UINT_MAX, "pex-clk1"), \
+ _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
+ _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
+ _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
+ _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias"), \
+ _pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
+ _pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
+ _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
+ _pad(TEGRA_IO_PAD_DBG, 25, UINT_MAX, "dbg"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP0, 28, UINT_MAX, "hdmi-dp0"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP1, 29, UINT_MAX, "hdmi-dp1"), \
+ _pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
+ _pad(TEGRA_IO_PAD_SDMMC2_HV, 34, 5, "sdmmc2-hv"), \
+ _pad(TEGRA_IO_PAD_SDMMC4, 36, UINT_MAX, "sdmmc4"), \
+ _pad(TEGRA_IO_PAD_CAM, 38, UINT_MAX, "cam"), \
+ _pad(TEGRA_IO_PAD_DSIB, 40, UINT_MAX, "dsib"), \
+ _pad(TEGRA_IO_PAD_DSIC, 41, UINT_MAX, "dsic"), \
+ _pad(TEGRA_IO_PAD_DSID, 42, UINT_MAX, "dsid"), \
+ _pad(TEGRA_IO_PAD_CSIC, 43, UINT_MAX, "csic"), \
+ _pad(TEGRA_IO_PAD_CSID, 44, UINT_MAX, "csid"), \
+ _pad(TEGRA_IO_PAD_CSIE, 45, UINT_MAX, "csie"), \
+ _pad(TEGRA_IO_PAD_CSIF, 46, UINT_MAX, "csif"), \
+ _pad(TEGRA_IO_PAD_SPI, 47, UINT_MAX, "spi"), \
+ _pad(TEGRA_IO_PAD_UFS, 49, UINT_MAX, "ufs"), \
+ _pad(TEGRA_IO_PAD_DMIC_HV, 52, 2, "dmic-hv"), \
+ _pad(TEGRA_IO_PAD_EDP, 53, UINT_MAX, "edp"), \
+ _pad(TEGRA_IO_PAD_SDMMC1_HV, 55, 4, "sdmmc1-hv"), \
+ _pad(TEGRA_IO_PAD_SDMMC3_HV, 56, 6, "sdmmc3-hv"), \
+ _pad(TEGRA_IO_PAD_CONN, 60, UINT_MAX, "conn"), \
+ _pad(TEGRA_IO_PAD_AUDIO_HV, 61, 1, "audio-hv"), \
+ _pad(TEGRA_IO_PAD_AO_HV, UINT_MAX, 0, "ao-hv")
static const struct tegra_io_pad_soc tegra186_io_pads[] = {
TEGRA186_IO_PAD_TABLE(TEGRA_IO_PAD)
@@ -2874,56 +3222,69 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
.num_reset_levels = ARRAY_SIZE(tegra186_reset_levels),
.num_wake_events = ARRAY_SIZE(tegra186_wake_events),
.wake_events = tegra186_wake_events,
+ .pmc_clks_data = NULL,
+ .num_pmc_clks = 0,
+ .has_blink_output = false,
};
+#define TEGRA194_IO_PAD_TABLE(_pad) \
+ /* .id .dpd .voltage .name */ \
+ _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
+ _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
+ _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4, UINT_MAX, "pex-clk-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK3, 5, UINT_MAX, "pex-clk3"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK1, 7, UINT_MAX, "pex-clk1"), \
+ _pad(TEGRA_IO_PAD_EQOS, 8, UINT_MAX, "eqos"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK_2_BIAS, 9, UINT_MAX, "pex-clk-2-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK_2, 10, UINT_MAX, "pex-clk-2"), \
+ _pad(TEGRA_IO_PAD_DAP3, 11, UINT_MAX, "dap3"), \
+ _pad(TEGRA_IO_PAD_DAP5, 12, UINT_MAX, "dap5"), \
+ _pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
+ _pad(TEGRA_IO_PAD_PWR_CTL, 15, UINT_MAX, "pwr-ctl"), \
+ _pad(TEGRA_IO_PAD_SOC_GPIO53, 16, UINT_MAX, "soc-gpio53"), \
+ _pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
+ _pad(TEGRA_IO_PAD_GP_PWM2, 18, UINT_MAX, "gp-pwm2"), \
+ _pad(TEGRA_IO_PAD_GP_PWM3, 19, UINT_MAX, "gp-pwm3"), \
+ _pad(TEGRA_IO_PAD_SOC_GPIO12, 20, UINT_MAX, "soc-gpio12"), \
+ _pad(TEGRA_IO_PAD_SOC_GPIO13, 21, UINT_MAX, "soc-gpio13"), \
+ _pad(TEGRA_IO_PAD_SOC_GPIO10, 22, UINT_MAX, "soc-gpio10"), \
+ _pad(TEGRA_IO_PAD_UART4, 23, UINT_MAX, "uart4"), \
+ _pad(TEGRA_IO_PAD_UART5, 24, UINT_MAX, "uart5"), \
+ _pad(TEGRA_IO_PAD_DBG, 25, UINT_MAX, "dbg"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP3, 26, UINT_MAX, "hdmi-dp3"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP2, 27, UINT_MAX, "hdmi-dp2"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP0, 28, UINT_MAX, "hdmi-dp0"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP1, 29, UINT_MAX, "hdmi-dp1"), \
+ _pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
+ _pad(TEGRA_IO_PAD_PEX_CTL2, 33, UINT_MAX, "pex-ctl2"), \
+ _pad(TEGRA_IO_PAD_PEX_L0_RST_N, 34, UINT_MAX, "pex-l0-rst"), \
+ _pad(TEGRA_IO_PAD_PEX_L1_RST_N, 35, UINT_MAX, "pex-l1-rst"), \
+ _pad(TEGRA_IO_PAD_SDMMC4, 36, UINT_MAX, "sdmmc4"), \
+ _pad(TEGRA_IO_PAD_PEX_L5_RST_N, 37, UINT_MAX, "pex-l5-rst"), \
+ _pad(TEGRA_IO_PAD_CAM, 38, UINT_MAX, "cam"), \
+ _pad(TEGRA_IO_PAD_CSIC, 43, UINT_MAX, "csic"), \
+ _pad(TEGRA_IO_PAD_CSID, 44, UINT_MAX, "csid"), \
+ _pad(TEGRA_IO_PAD_CSIE, 45, UINT_MAX, "csie"), \
+ _pad(TEGRA_IO_PAD_CSIF, 46, UINT_MAX, "csif"), \
+ _pad(TEGRA_IO_PAD_SPI, 47, UINT_MAX, "spi"), \
+ _pad(TEGRA_IO_PAD_UFS, 49, UINT_MAX, "ufs"), \
+ _pad(TEGRA_IO_PAD_CSIG, 50, UINT_MAX, "csig"), \
+ _pad(TEGRA_IO_PAD_CSIH, 51, UINT_MAX, "csih"), \
+ _pad(TEGRA_IO_PAD_EDP, 53, UINT_MAX, "edp"), \
+ _pad(TEGRA_IO_PAD_SDMMC1_HV, 55, 4, "sdmmc1-hv"), \
+ _pad(TEGRA_IO_PAD_SDMMC3_HV, 56, 6, "sdmmc3-hv"), \
+ _pad(TEGRA_IO_PAD_CONN, 60, UINT_MAX, "conn"), \
+ _pad(TEGRA_IO_PAD_AUDIO_HV, 61, 1, "audio-hv"), \
+ _pad(TEGRA_IO_PAD_AO_HV, UINT_MAX, 0, "ao-hv")
+
static const struct tegra_io_pad_soc tegra194_io_pads[] = {
- { .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK_BIAS, .dpd = 4, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK3, .dpd = 5, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 7, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_EQOS, .dpd = 8, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK2_BIAS, .dpd = 9, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 10, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DAP3, .dpd = 11, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DAP5, .dpd = 12, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PWR_CTL, .dpd = 15, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SOC_GPIO53, .dpd = 16, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_GP_PWM2, .dpd = 18, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_GP_PWM3, .dpd = 19, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SOC_GPIO12, .dpd = 20, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SOC_GPIO13, .dpd = 21, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SOC_GPIO10, .dpd = 22, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_UART4, .dpd = 23, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_UART5, .dpd = 24, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DBG, .dpd = 25, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HDMI_DP3, .dpd = 26, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HDMI_DP2, .dpd = 27, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HDMI_DP0, .dpd = 28, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HDMI_DP1, .dpd = 29, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CTL2, .dpd = 33, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_L0_RST_N, .dpd = 34, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_L1_RST_N, .dpd = 35, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC4, .dpd = 36, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_L5_RST_N, .dpd = 37, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIC, .dpd = 43, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSID, .dpd = 44, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIE, .dpd = 45, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIF, .dpd = 46, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SPI, .dpd = 47, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_UFS, .dpd = 49, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIG, .dpd = 50, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIH, .dpd = 51, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_EDP, .dpd = 53, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CONN, .dpd = 60, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = UINT_MAX },
+ TEGRA194_IO_PAD_TABLE(TEGRA_IO_PAD)
+};
+
+static const struct pinctrl_pin_desc tegra194_pin_descs[] = {
+ TEGRA194_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
};
static const struct tegra_pmc_regs tegra194_pmc_regs = {
@@ -2976,10 +3337,12 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
.has_tsense_reset = false,
.has_gpu_clamps = false,
.needs_mbist_war = false,
- .has_impl_33v_pwr = false,
+ .has_impl_33v_pwr = true,
.maybe_tz_only = false,
.num_io_pads = ARRAY_SIZE(tegra194_io_pads),
.io_pads = tegra194_io_pads,
+ .num_pin_descs = ARRAY_SIZE(tegra194_pin_descs),
+ .pin_descs = tegra194_pin_descs,
.regs = &tegra194_pmc_regs,
.init = NULL,
.setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
@@ -2991,6 +3354,9 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
.num_reset_levels = ARRAY_SIZE(tegra186_reset_levels),
.num_wake_events = ARRAY_SIZE(tegra194_wake_events),
.wake_events = tegra194_wake_events,
+ .pmc_clks_data = NULL,
+ .num_pmc_clks = 0,
+ .has_blink_output = false,
};
static const struct of_device_id tegra_pmc_match[] = {
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index ccc6d53fe788..de0123ec8ad6 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -130,6 +130,19 @@ static int am33xx_push_sram_idle(void)
return 0;
}
+static int am33xx_do_sram_idle(u32 wfi_flags)
+{
+ int ret = 0;
+
+ if (!m3_ipc || !pm_ops)
+ return 0;
+
+ if (wfi_flags & WFI_FLAG_WAKE_M3)
+ ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_IDLE);
+
+ return pm_ops->cpu_suspend(am33xx_do_wfi_sram, wfi_flags);
+}
+
static int __init am43xx_map_gic(void)
{
gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K);
@@ -260,6 +273,8 @@ static int am33xx_pm_begin(suspend_state_t state)
rtc_only_idle = 0;
}
+ pm_ops->begin_suspend();
+
switch (state) {
case PM_SUSPEND_MEM:
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
@@ -301,6 +316,8 @@ static void am33xx_pm_end(void)
}
rtc_only_idle = 0;
+
+ pm_ops->finish_suspend();
}
static int am33xx_pm_valid(suspend_state_t state)
@@ -503,7 +520,7 @@ static int am33xx_pm_probe(struct platform_device *pdev)
suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
#endif /* CONFIG_SUSPEND */
- ret = pm_ops->init();
+ ret = pm_ops->init(am33xx_do_sram_idle);
if (ret) {
dev_err(dev, "Unable to call core pm init!\n");
ret = -ENODEV;
@@ -522,6 +539,8 @@ err_free_sram:
static int am33xx_pm_remove(struct platform_device *pdev)
{
+ if (pm_ops->deinit)
+ pm_ops->deinit();
suspend_set_ops(NULL);
wkup_m3_ipc_put(m3_ipc);
am33xx_pm_free_sram();
diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h
index bb5c2c999c05..df59aaf5bf34 100644
--- a/include/dt-bindings/clock/tegra114-car.h
+++ b/include/dt-bindings/clock/tegra114-car.h
@@ -228,6 +228,8 @@
#define TEGRA114_CLK_CLK_M 201
#define TEGRA114_CLK_CLK_M_DIV2 202
#define TEGRA114_CLK_CLK_M_DIV4 203
+#define TEGRA114_CLK_OSC_DIV2 202
+#define TEGRA114_CLK_OSC_DIV4 203
#define TEGRA114_CLK_PLL_REF 204
#define TEGRA114_CLK_PLL_C 205
#define TEGRA114_CLK_PLL_C_OUT1 206
@@ -274,7 +276,7 @@
#define TEGRA114_CLK_CLK_OUT_2 246
#define TEGRA114_CLK_CLK_OUT_3 247
#define TEGRA114_CLK_BLINK 248
-/* 249 */
+#define TEGRA114_CLK_OSC 249
/* 250 */
/* 251 */
#define TEGRA114_CLK_XUSB_HOST_SRC 252
diff --git a/include/dt-bindings/clock/tegra124-car-common.h b/include/dt-bindings/clock/tegra124-car-common.h
index 0c4f5be0a742..2a9acd592bff 100644
--- a/include/dt-bindings/clock/tegra124-car-common.h
+++ b/include/dt-bindings/clock/tegra124-car-common.h
@@ -227,6 +227,8 @@
#define TEGRA124_CLK_CLK_M 201
#define TEGRA124_CLK_CLK_M_DIV2 202
#define TEGRA124_CLK_CLK_M_DIV4 203
+#define TEGRA124_CLK_OSC_DIV2 202
+#define TEGRA124_CLK_OSC_DIV4 203
#define TEGRA124_CLK_PLL_REF 204
#define TEGRA124_CLK_PLL_C 205
#define TEGRA124_CLK_PLL_C_OUT1 206
@@ -273,7 +275,7 @@
#define TEGRA124_CLK_CLK_OUT_2 246
#define TEGRA124_CLK_CLK_OUT_3 247
#define TEGRA124_CLK_BLINK 248
-/* 249 */
+#define TEGRA124_CLK_OSC 249
/* 250 */
/* 251 */
#define TEGRA124_CLK_XUSB_HOST_SRC 252
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index 44f60623f99b..7a8f10b9a66d 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -262,6 +262,8 @@
#define TEGRA210_CLK_CLK_M 233
#define TEGRA210_CLK_CLK_M_DIV2 234
#define TEGRA210_CLK_CLK_M_DIV4 235
+#define TEGRA210_CLK_OSC_DIV2 234
+#define TEGRA210_CLK_OSC_DIV4 235
#define TEGRA210_CLK_PLL_REF 236
#define TEGRA210_CLK_PLL_C 237
#define TEGRA210_CLK_PLL_C_OUT1 238
@@ -355,7 +357,7 @@
#define TEGRA210_CLK_PLL_A_OUT_ADSP 323
#define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324
/* 325 */
-/* 326 */
+#define TEGRA210_CLK_OSC 326
/* 327 */
/* 328 */
/* 329 */
diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h
index 3c90f1535551..7b542c10fc27 100644
--- a/include/dt-bindings/clock/tegra30-car.h
+++ b/include/dt-bindings/clock/tegra30-car.h
@@ -196,6 +196,8 @@
#define TEGRA30_CLK_CLK_M 171
#define TEGRA30_CLK_CLK_M_DIV2 172
#define TEGRA30_CLK_CLK_M_DIV4 173
+#define TEGRA30_CLK_OSC_DIV2 172
+#define TEGRA30_CLK_OSC_DIV4 173
#define TEGRA30_CLK_PLL_REF 174
#define TEGRA30_CLK_PLL_C 175
#define TEGRA30_CLK_PLL_C_OUT1 176
@@ -243,7 +245,7 @@
#define TEGRA30_CLK_HCLK 217
#define TEGRA30_CLK_PCLK 218
/* 219 */
-/* 220 */
+#define TEGRA30_CLK_OSC 220
/* 221 */
/* 222 */
/* 223 */
diff --git a/include/dt-bindings/soc/tegra-pmc.h b/include/dt-bindings/soc/tegra-pmc.h
new file mode 100644
index 000000000000..a99a457471ee
--- /dev/null
+++ b/include/dt-bindings/soc/tegra-pmc.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_SOC_TEGRA_PMC_H
+#define _DT_BINDINGS_SOC_TEGRA_PMC_H
+
+#define TEGRA_PMC_CLK_OUT_1 0
+#define TEGRA_PMC_CLK_OUT_2 1
+#define TEGRA_PMC_CLK_OUT_3 2
+#define TEGRA_PMC_CLK_BLINK 3
+
+#define TEGRA_PMC_CLK_MAX 4
+
+#endif /* _DT_BINDINGS_SOC_TEGRA_PMC_H */
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 390437887b46..49a53a137610 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -12,6 +12,9 @@
#ifndef AT91_PMC_H
#define AT91_PMC_H
+#define AT91_PMC_V1 (1) /* PMC version 1 */
+#define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */
+
#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */
#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */
@@ -30,16 +33,34 @@
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
+#define AT91_PMC_PLL_CTRL0 0x0C /* PLL Control Register 0 [for SAM9X60] */
+#define AT91_PMC_PLL_CTRL0_ENPLL (1 << 28) /* Enable PLL */
+#define AT91_PMC_PLL_CTRL0_ENPLLCK (1 << 29) /* Enable PLL clock for PMC */
+#define AT91_PMC_PLL_CTRL0_ENLOCK (1 << 31) /* Enable PLL lock */
+
+#define AT91_PMC_PLL_CTRL1 0x10 /* PLL Control Register 1 [for SAM9X60] */
+
#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */
#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */
+#define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */
+#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */
+#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */
+#define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */
+#define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */
+
#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
+#define AT91_PMC_PLL_UPDT 0x1C /* PMC PLL update register [for SAM9X60] */
+#define AT91_PMC_PLL_UPDT_UPDATE (1 << 8) /* Update PLL settings */
+#define AT91_PMC_PLL_UPDT_ID (1 << 0) /* PLL ID */
+#define AT91_PMC_PLL_UPDT_STUPTIM (0xff << 16) /* Startup time */
+
#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */
@@ -180,6 +201,8 @@
#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
+#define AT91_PMC_PLL_ISR0 0xEC /* PLL Interrupt Status Register 0 [SAM9X60 only] */
+
#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/
#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */
#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index a7a2391d6f96..8efa5ac22d7e 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -329,7 +329,7 @@ struct zynqmp_eemi_ops {
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload);
-#if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
+#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h
index dd5971937a64..644af1d89cfa 100644
--- a/include/linux/platform_data/pm33xx.h
+++ b/include/linux/platform_data/pm33xx.h
@@ -46,9 +46,13 @@ struct am33xx_pm_sram_addr {
};
struct am33xx_pm_platform_data {
- int (*init)(void);
+ int (*init)(int (*idle)(u32 wfi_flags));
+ int (*deinit)(void);
int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long),
unsigned long args);
+ int (*cpu_suspend)(int (*fn)(unsigned long), unsigned long args);
+ void (*begin_suspend)(void);
+ void (*finish_suspend)(void);
struct am33xx_pm_sram_addr *(*get_sram_addrs)(void);
void __iomem *(*get_rtc_base_addr)(void);
void (*save_context)(void);
diff --git a/include/soc/tegra/cpuidle.h b/include/soc/tegra/cpuidle.h
index 029ba1f4b2cc..5665975015d8 100644
--- a/include/soc/tegra/cpuidle.h
+++ b/include/soc/tegra/cpuidle.h
@@ -6,7 +6,7 @@
#ifndef __SOC_TEGRA_CPUIDLE_H__
#define __SOC_TEGRA_CPUIDLE_H__
-#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_TEGRA) && defined(CONFIG_CPU_IDLE)
+#ifdef CONFIG_ARM_TEGRA_CPUIDLE
void tegra_cpuidle_pcie_irqs_in_use(void);
#else
static inline void tegra_cpuidle_pcie_irqs_in_use(void)
diff --git a/arch/arm/mach-tegra/irq.h b/include/soc/tegra/irq.h
index 7a94cf121448..8eb11a7109e4 100644
--- a/arch/arm/mach-tegra/irq.h
+++ b/include/soc/tegra/irq.h
@@ -3,9 +3,11 @@
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
*/
-#ifndef __TEGRA_IRQ_H
-#define __TEGRA_IRQ_H
+#ifndef __SOC_TEGRA_IRQ_H
+#define __SOC_TEGRA_IRQ_H
+#if defined(CONFIG_ARM)
bool tegra_pending_sgi(void);
-
#endif
+
+#endif /* __SOC_TEGRA_IRQ_H */
diff --git a/include/soc/tegra/pm.h b/include/soc/tegra/pm.h
index 951fcd738d55..08477d7bfab9 100644
--- a/include/soc/tegra/pm.h
+++ b/include/soc/tegra/pm.h
@@ -6,6 +6,8 @@
#ifndef __SOC_TEGRA_PM_H__
#define __SOC_TEGRA_PM_H__
+#include <linux/errno.h>
+
enum tegra_suspend_mode {
TEGRA_SUSPEND_NONE = 0,
TEGRA_SUSPEND_LP2, /* CPU voltage off */
@@ -20,6 +22,12 @@ tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode);
/* low-level resume entry point */
void tegra_resume(void);
+
+int tegra30_pm_secondary_cpu_suspend(unsigned long arg);
+void tegra_pm_clear_cpu_in_lp2(void);
+void tegra_pm_set_cpu_in_lp2(void);
+int tegra_pm_enter_lp2(void);
+int tegra_pm_park_secondary_cpu(unsigned long cpu);
#else
static inline enum tegra_suspend_mode
tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)
@@ -30,6 +38,29 @@ tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)
static inline void tegra_resume(void)
{
}
+
+static inline int tegra30_pm_secondary_cpu_suspend(unsigned long arg)
+{
+ return -ENOTSUPP;
+}
+
+static inline void tegra_pm_clear_cpu_in_lp2(void)
+{
+}
+
+static inline void tegra_pm_set_cpu_in_lp2(void)
+{
+}
+
+static inline int tegra_pm_enter_lp2(void)
+{
+ return -ENOTSUPP;
+}
+
+static inline int tegra_pm_park_secondary_cpu(unsigned long cpu)
+{
+ return -ENOTSUPP;
+}
#endif /* CONFIG_PM_SLEEP */
#endif /* __SOC_TEGRA_PM_H__ */
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index 57e58faf660b..0dd52b0a5c1b 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -113,8 +113,9 @@ enum tegra_io_pad {
TEGRA_IO_PAD_PEX_CLK_BIAS,
TEGRA_IO_PAD_PEX_CLK1,
TEGRA_IO_PAD_PEX_CLK2,
- TEGRA_IO_PAD_PEX_CLK2_BIAS,
TEGRA_IO_PAD_PEX_CLK3,
+ TEGRA_IO_PAD_PEX_CLK_2_BIAS,
+ TEGRA_IO_PAD_PEX_CLK_2,
TEGRA_IO_PAD_PEX_CNTRL,
TEGRA_IO_PAD_PEX_CTL2,
TEGRA_IO_PAD_PEX_L0_RST_N,