diff options
| -rw-r--r-- | Documentation/hwmon/inspur-ipsps1.rst | 79 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/inspur-ipsps.c | 228 |
4 files changed, 317 insertions, 0 deletions
diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst new file mode 100644 index 000000000000..2b871ae3448f --- /dev/null +++ b/Documentation/hwmon/inspur-ipsps1.rst @@ -0,0 +1,79 @@ +Kernel driver inspur-ipsps1 +======================= + +Supported chips: + + * Inspur Power System power supply unit + +Author: John Wang <wangzqbj@inspur.com> + +Description +----------- + +This driver supports Inspur Power System power supplies. This driver +is a client to the core PMBus driver. + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + +Sysfs entries +------------- + +The following attributes are supported: + +======================= ====================================================== +curr1_input Measured input current +curr1_label "iin" +curr1_max Maximum current +curr1_max_alarm Current high alarm +curr2_input Measured output current in mA. +curr2_label "iout1" +curr2_crit Critical maximum current +curr2_crit_alarm Current critical high alarm +curr2_max Maximum current +curr2_max_alarm Current high alarm + +fan1_alarm Fan 1 warning. +fan1_fault Fan 1 fault. +fan1_input Fan 1 speed in RPM. + +in1_alarm Input voltage under-voltage alarm. +in1_input Measured input voltage in mV. +in1_label "vin" +in2_input Measured output voltage in mV. +in2_label "vout1" +in2_lcrit Critical minimum output voltage +in2_lcrit_alarm Output voltage critical low alarm +in2_max Maximum output voltage +in2_max_alarm Output voltage high alarm +in2_min Minimum output voltage +in2_min_alarm Output voltage low alarm + +power1_alarm Input fault or alarm. +power1_input Measured input power in uW. +power1_label "pin" +power1_max Input power limit +power2_max_alarm Output power high alarm +power2_max Output power limit +power2_input Measured output power in uW. +power2_label "pout" + +temp[1-3]_input Measured temperature +temp[1-2]_max Maximum temperature +temp[1-3]_max_alarm Temperature high alarm + +vendor Manufacturer name +model Product model +part_number Product part number +serial_number Product serial number +fw_version Firmware version +hw_version Hardware version +mode Work mode. Can be set to active or + standby, when set to standby, PSU will + automatically switch between standby + and redundancy mode. +======================= ====================================================== diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index b6588483fae1..d62d69bb7e49 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -46,6 +46,15 @@ config SENSORS_IBM_CFFPS This driver can also be built as a module. If so, the module will be called ibm-cffps. +config SENSORS_INSPUR_IPSPS + tristate "INSPUR Power System Power Supply" + help + If you say yes here you get hardware monitoring support for the INSPUR + Power System power supply. + + This driver can also be built as a module. If so, the module will + be called inspur-ipsps. + config SENSORS_IR35221 tristate "Infineon IR35221" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index c950ea9a5d00..03bacfcfd660 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o +obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o obj-$(CONFIG_SENSORS_IR35221) += ir35221.o obj-$(CONFIG_SENSORS_IR38064) += ir38064.o obj-$(CONFIG_SENSORS_IRPS5401) += irps5401.o diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c new file mode 100644 index 000000000000..42e01549184a --- /dev/null +++ b/drivers/hwmon/pmbus/inspur-ipsps.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2019 Inspur Corp. + */ + +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/pmbus.h> +#include <linux/hwmon-sysfs.h> + +#include "pmbus.h" + +#define IPSPS_REG_VENDOR_ID 0x99 +#define IPSPS_REG_MODEL 0x9A +#define IPSPS_REG_FW_VERSION 0x9B +#define IPSPS_REG_PN 0x9C +#define IPSPS_REG_SN 0x9E +#define IPSPS_REG_HW_VERSION 0xB0 +#define IPSPS_REG_MODE 0xFC + +#define MODE_ACTIVE 0x55 +#define MODE_STANDBY 0x0E +#define MODE_REDUNDANCY 0x00 + +#define MODE_ACTIVE_STRING "active" +#define MODE_STANDBY_STRING "standby" +#define MODE_REDUNDANCY_STRING "redundancy" + +enum ipsps_index { + vendor, + model, + fw_version, + part_number, + serial_number, + hw_version, + mode, + num_regs, +}; + +static const u8 ipsps_regs[num_regs] = { + [vendor] = IPSPS_REG_VENDOR_ID, + [model] = IPSPS_REG_MODEL, + [fw_version] = IPSPS_REG_FW_VERSION, + [part_number] = IPSPS_REG_PN, + [serial_number] = IPSPS_REG_SN, + [hw_version] = IPSPS_REG_HW_VERSION, + [mode] = IPSPS_REG_MODE, +}; + +static ssize_t ipsps_string_show(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + u8 reg; + int rc; + char *p; + char data[I2C_SMBUS_BLOCK_MAX + 1]; + struct i2c_client *client = to_i2c_client(dev->parent); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + reg = ipsps_regs[attr->index]; + rc = i2c_smbus_read_block_data(client, reg, data); + if (rc < 0) + return rc; + + /* filled with printable characters, ending with # */ + p = memscan(data, '#', rc); + *p = '\0'; + + return snprintf(buf, PAGE_SIZE, "%s\n", data); +} + +static ssize_t ipsps_fw_version_show(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + u8 reg; + int rc; + u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 }; + struct i2c_client *client = to_i2c_client(dev->parent); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + reg = ipsps_regs[attr->index]; + rc = i2c_smbus_read_block_data(client, reg, data); + if (rc < 0) + return rc; + + if (rc != 6) + return -EPROTO; + + return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n", + data[1], data[2]/* < 100 */, data[3]/*< 10*/, + data[4], data[5]/* < 100 */); +} + +static ssize_t ipsps_mode_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + u8 reg; + int rc; + struct i2c_client *client = to_i2c_client(dev->parent); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + reg = ipsps_regs[attr->index]; + rc = i2c_smbus_read_byte_data(client, reg); + if (rc < 0) + return rc; + + switch (rc) { + case MODE_ACTIVE: + return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n", + MODE_ACTIVE_STRING, + MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING); + case MODE_STANDBY: + return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n", + MODE_ACTIVE_STRING, + MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING); + case MODE_REDUNDANCY: + return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n", + MODE_ACTIVE_STRING, + MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING); + default: + return snprintf(buf, PAGE_SIZE, "unspecified\n"); + } +} + +static ssize_t ipsps_mode_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + u8 reg; + int rc; + struct i2c_client *client = to_i2c_client(dev->parent); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + reg = ipsps_regs[attr->index]; + if (sysfs_streq(MODE_STANDBY_STRING, buf)) { + rc = i2c_smbus_write_byte_data(client, reg, + MODE_STANDBY); + if (rc < 0) + return rc; + return count; + } else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) { + rc = i2c_smbus_write_byte_data(client, reg, + MODE_ACTIVE); + if (rc < 0) + return rc; + return count; + } + + return -EINVAL; +} + +static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor); +static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model); +static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string, part_number); +static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string, serial_number); +static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version); +static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version, fw_version); +static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode); + +static struct attribute *ipsps_attrs[] = { + &sensor_dev_attr_vendor.dev_attr.attr, + &sensor_dev_attr_model.dev_attr.attr, + &sensor_dev_attr_part_number.dev_attr.attr, + &sensor_dev_attr_serial_number.dev_attr.attr, + &sensor_dev_attr_hw_version.dev_attr.attr, + &sensor_dev_attr_fw_version.dev_attr.attr, + &sensor_dev_attr_mode.dev_attr.attr, + NULL, +}; + +ATTRIBUTE_GROUPS(ipsps); + +static struct pmbus_driver_info ipsps_info = { + .pages = 1, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | + PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | + PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | + PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12, + .groups = ipsps_groups, +}; + +static struct pmbus_platform_data ipsps_pdata = { + .flags = PMBUS_SKIP_STATUS_CHECK, +}; + +static int ipsps_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + client->dev.platform_data = &ipsps_pdata; + return pmbus_do_probe(client, id, &ipsps_info); +} + +static const struct i2c_device_id ipsps_id[] = { + { "ipsps1", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ipsps_id); + +#ifdef CONFIG_OF +static const struct of_device_id ipsps_of_match[] = { + { .compatible = "inspur,ipsps1" }, + {} +}; +MODULE_DEVICE_TABLE(of, ipsps_of_match); +#endif + +static struct i2c_driver ipsps_driver = { + .driver = { + .name = "inspur-ipsps", + .of_match_table = of_match_ptr(ipsps_of_match), + }, + .probe = ipsps_probe, + .remove = pmbus_do_remove, + .id_table = ipsps_id, +}; + +module_i2c_driver(ipsps_driver); + +MODULE_AUTHOR("John Wang"); +MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies"); +MODULE_LICENSE("GPL"); |